-
Enhancing Bistable Vibration Energy Harvesters with Tunable Circuits: A Comparative Analysis
Authors:
Adrien Morel,
Quentin Demouron,
Adrien Badel
Abstract:
In this article, we present an analysis of the effects of nonlinear circuits on bistable vibration energy harvesters. We begin by introducing an analytical model for bistable vibration energy harvesters and demonstrate that the impact of nonlinear circuits can be characterized by two factors: electrically-induced damping and electrically-induced stiffness. Subsequently, we investigate how these fa…
▽ More
In this article, we present an analysis of the effects of nonlinear circuits on bistable vibration energy harvesters. We begin by introducing an analytical model for bistable vibration energy harvesters and demonstrate that the impact of nonlinear circuits can be characterized by two factors: electrically-induced damping and electrically-induced stiffness. Subsequently, we investigate how these factors influence the power-frequency response of the harvester. Our findings reveal that electrically-induced damping significantly affects the bistable vibration energy harvester dynamics, whereas electrically-induced stiffness has minimal impact, which is a notable difference from the behavior of linear harvesters connected to nonlinear circuits. Thereafter, we conduct a comparative study of bistable energy harvesters connected to different nonlinear circuits already well documented in the literature. Our analysis demonstrates that, in most cases, the parallel synchronized switch harvesting on inductor circuit yields superior performance due to its ability to maximize electrically-induced damping. These comparative assessments and conclusions are evaluated within the framework of our proposed models and are contrasted with results obtained from linear vibration energy harvesters. The derived comparison maps presented at the end of this paper offer quantitative justification for selecting the optimal circuit for bistable energy harvesters, while deepening our comprehension of the intricate dynamics associated with nonlinear harvesters coupled with nonlinear circuits.
△ Less
Submitted 31 August, 2024;
originally announced September 2024.
-
Multi-Agent Deep Reinforcement Learning for Resilience Optimization in 5G RAN
Authors:
Soumeya Kaada,
Dinh-Hieu Tran,
Nguyen Van Huynh,
Marie-Line Alberi Morel,
Sofiene Jelassi,
Gerardo Rubino
Abstract:
Resilience is defined as the ability of a network to resist, adapt, and quickly recover from disruptions, and to continue to maintain an acceptable level of services from users' perspective. With the advent of future radio networks, including advanced 5G and upcoming 6G, critical services become integral to future networks, requiring uninterrupted service delivery for end users. Unfortunately, wit…
▽ More
Resilience is defined as the ability of a network to resist, adapt, and quickly recover from disruptions, and to continue to maintain an acceptable level of services from users' perspective. With the advent of future radio networks, including advanced 5G and upcoming 6G, critical services become integral to future networks, requiring uninterrupted service delivery for end users. Unfortunately, with the growing network complexity, user mobility and diversity, it becomes challenging to scale current resilience management techniques that rely on local optimizations to large dense network deployments. This paper aims to address this problem by globally optimizing the resilience of a dense multi-cell network based on multi-agent deep reinforcement learning. Specifically, our proposed solution can dynamically tilt cell antennas and reconfigure transmit power to mitigate outages and increase both coverage and service availability. A multi-objective optimization problem is formulated to simultaneously satisfy resiliency constraints while maximizing the service quality in the network area in order to minimize the impact of outages on neighbouring cells. Extensive simulations then demonstrate that with our proposed solution, the average service availability in terms of user throughput can be increased by up to 50-60% on average, while reaching a coverage availability of 99% in best cases.
△ Less
Submitted 25 July, 2024;
originally announced July 2024.
-
Automatic Acquisition of a Repertoire of Diverse Grasping Trajectories through Behavior Shaping and Novelty Search
Authors:
Aurélien Morel,
Yakumo Kunimoto,
Alex Coninx,
Stéphane Doncieux
Abstract:
Grasping a particular object may require a dedicated grasping movement that may also be specific to the robot end-effector. No generic and autonomous method does exist to generate these movements without making hypotheses on the robot or on the object. Learning methods could help to autonomously discover relevant grasping movements, but they face an important issue: grasping movements are so rare…
▽ More
Grasping a particular object may require a dedicated grasping movement that may also be specific to the robot end-effector. No generic and autonomous method does exist to generate these movements without making hypotheses on the robot or on the object. Learning methods could help to autonomously discover relevant grasping movements, but they face an important issue: grasping movements are so rare that a learning method based on exploration has little chance to ever observe an interesting movement, thus creating a bootstrap issue. We introduce an approach to generate diverse grasping movements in order to solve this problem. The movements are generated in simulation, for particular object positions. We test it on several simulated robots: Baxter, Pepper and a Kuka Iiwa arm. Although we show that generated movements actually work on a real Baxter robot, the aim is to use this method to create a large dataset to bootstrap deep learning methods.
△ Less
Submitted 17 May, 2022;
originally announced May 2022.
-
Compact gate-based read-out of multiplexed quantum devices with a cryogenic CMOS active inductor
Authors:
L. Le Guevel,
G. Billiot,
S. De Franceschi,
A. Morel,
X. Jehl,
A. G. M. Jansen,
G. Pillonnet
Abstract:
In the strive for scalable quantum processors, significant effort is being devoted to the development of cryogenic classical hardware for the control and readout of a growing number of qubits. Here we report on a cryogenic circuit incorporating a CMOS-based active inductor enabling fast impedance measurements with a sensitivity of 10 aF and an input-referred noise of 3.7 aF/sqrt(Hz). This type of…
▽ More
In the strive for scalable quantum processors, significant effort is being devoted to the development of cryogenic classical hardware for the control and readout of a growing number of qubits. Here we report on a cryogenic circuit incorporating a CMOS-based active inductor enabling fast impedance measurements with a sensitivity of 10 aF and an input-referred noise of 3.7 aF/sqrt(Hz). This type of circuit is especially conceived for the readout of semiconductor spin qubits. As opposed to commonly used schemes based on dispersive rf reflectometry, which require mm-scale passive inductors, it allows for a markedly reduced footprint (50$μ$m $\times$ 60$μ$m), facilitating its integration in a scalable quantum-classical architecture. In addition, its active inductor results in a resonant circuit with tunable frequency and quality factor, enabling the optimization of readout sensitivity.
△ Less
Submitted 9 February, 2021; v1 submitted 8 February, 2021;
originally announced February 2021.
-
Modelling and design of highly coupled piezoelectric energy harvesters for broadband applications
Authors:
D Gibus,
P. Gasnier,
A. Morel,
S. Boisseau,
A. Badel
Abstract:
This paper reports a method to design highly coupled piezoelectric energy harvesters with frequency tuning capabilities using nonlinear electrical techniques. A cantilever beam with two PMN-PT patches has been optimized thanks to both analytical modelling and Finite Element Methods (FEM). The built prototype exhibits a strong electromechanical coupling (k${}^2$=17.6%) and a figure of merit (km…
▽ More
This paper reports a method to design highly coupled piezoelectric energy harvesters with frequency tuning capabilities using nonlinear electrical techniques. A cantilever beam with two PMN-PT patches has been optimized thanks to both analytical modelling and Finite Element Methods (FEM). The built prototype exhibits a strong electromechanical coupling (k${}^2$=17.6%) and a figure of merit (km${}^2$Q=12.4) which allow a bandwidth corresponding to 22% of the resonant frequency value.
△ Less
Submitted 14 March, 2019;
originally announced March 2019.
-
A Shock-Optimized SECE Integrated Circuit
Authors:
Adrien Morel,
Anthony Quelen,
Pierre Gasnier,
Romain Grézaud,
Stéphane Monfray,
Adrien Badel,
Gaël Pillonnet
Abstract:
This paper presents a fully integrated, self-starting shock-optimized Synchronous Electric Charge Extraction (SECE) interface for piezoelectric harvesters (PEHs). After introducing a model of the electromechanical system under shocks, we prove that the SECE is the most appropriate electrical interface to maximize the harvested energy from our PEH. The proposed interface is then presented, both at…
▽ More
This paper presents a fully integrated, self-starting shock-optimized Synchronous Electric Charge Extraction (SECE) interface for piezoelectric harvesters (PEHs). After introducing a model of the electromechanical system under shocks, we prove that the SECE is the most appropriate electrical interface to maximize the harvested energy from our PEH. The proposed interface is then presented, both at system-and transistor-levels. Thanks to a dedicated sequencing, its quiescent current is as low as 30nA. This makes the proposed interface efficient even under time-spaced shocks occurring at sporadic and unpredictable rates. The circuit is for instance able to maintain its self-powered operation while harvesting very small shocks of 8uJ happening every 100 seconds. Our chip was fabricated in CMOS 40nm technology, and occupies a 0.55mm^2 core area. The measured maximum electrical efficiency under shocks reaches 91%. Under shocks, the harvested energy by the proposed shock-optimized SECE interface is 4.2 times higher than using a standard energy harvesting circuit, leading to the best shock FoM among prior art.
△ Less
Submitted 28 September, 2018;
originally announced October 2018.
-
A unified N-SECE strategy for highly coupled piezoelectric energy scavengers
Authors:
Adrien Morel,
A. Badel,
Y Wanderoild,
G Pillonnet
Abstract:
This paper proposes a novel vibration energy harvesting strategy based on an extension of the Synchronous Electric Charge Extraction (SECE) approach, enabling both the maximization of the harvested power and a consequent bandwidth enlargement in the case of highly coupled/lightly damped piezoelectric energy harvesters. The proposed strategy relies on the tuning of the frequency of the energy extra…
▽ More
This paper proposes a novel vibration energy harvesting strategy based on an extension of the Synchronous Electric Charge Extraction (SECE) approach, enabling both the maximization of the harvested power and a consequent bandwidth enlargement in the case of highly coupled/lightly damped piezoelectric energy harvesters. The proposed strategy relies on the tuning of the frequency of the energy extraction events, which is either N times greater than the vibration frequency (Multiple SECE case, N > 1) or 1/N times smaller (Regenerative SECE, N < 1). We first prove analytically than increasing or decreasing N both lead to a damping reduction. While N has no impact on the system's resonance frequency in the Regenerative case (N < 1), we show that this resonant frequency becomes a function of N in the Multiple SECE case (N > 1). Experimental results on a highly coupled/lowly damped piezoelectric harvester (k^2= 0.44, Q_m = 20) demonstrates the potential of this strategy, leading to 257% harvested power improvement compared to SECE (N = 1). and the possibility to tune the resonant frequency on a range as large as 35% of the short-circuit resonant frequency of the harvester.
△ Less
Submitted 16 July, 2018;
originally announced September 2018.
-
Short Circuit Synchronized Electric Charge Extraction (SC-SECE): a tunable interface for wideband vibration energy harvesting
Authors:
Adrien Morel,
Adrien Badel,
Pierre Gasnier,
David Gibus,
Gael Pillonnet
Abstract:
In this paper, we present a new harvesting interface, called Short Circuit Synchronous Electric Charge Extraction (SC-SECE). The SC-SECE strategy includes a tunable short-circuit time thanks to two tuning parameters, $φ_S$ and $Δφ$. $φ_S$ stands for the phase between the mechanical displacement extrema and the energy harvesting event. $Δφ$ stands for the angular time spent in the short-circuit pha…
▽ More
In this paper, we present a new harvesting interface, called Short Circuit Synchronous Electric Charge Extraction (SC-SECE). The SC-SECE strategy includes a tunable short-circuit time thanks to two tuning parameters, $φ_S$ and $Δφ$. $φ_S$ stands for the phase between the mechanical displacement extrema and the energy harvesting event. $Δφ$ stands for the angular time spent in the short-circuit phase. The theoretical analysis and modelling of this short-circuit influences are derived in this paper. When associated with highly coupled harvesters, it is shown that both the harvested power and bandwidth are greatly improved. These results have been numerically validated and they demonstrate the potential of this strategy for extending the bandwidth of piezoelectric vibration energy harvesters.
△ Less
Submitted 21 June, 2018;
originally announced August 2018.
-
A 30nA Quiescent 80nW to 14mW Power Range Shock-Optimized SECE-based Piezoelectric Harvesting Interface with 420% Harvested Energy Improvement
Authors:
Anthony Quelen,
Adrien Morel,
Pierre Gasnier,
Romain Grézaud,
Stéphane Monfray,
Gael Pillonnet
Abstract:
Piezoelectric Energy Harvesters (PEH) are usually used to convert mechanical energy (vibration, shocks) into electrical energy, in order to supply energy-autonomous sensor nodes in industrial, biomedical or domotic applications. Non-linear extraction strategies such as Synchronous Electrical Charge Extraction (SECE) [1-2], energy investing [3] or Synchronized Switch Harvesting on Inductor (SSHI) […
▽ More
Piezoelectric Energy Harvesters (PEH) are usually used to convert mechanical energy (vibration, shocks) into electrical energy, in order to supply energy-autonomous sensor nodes in industrial, biomedical or domotic applications. Non-linear extraction strategies such as Synchronous Electrical Charge Extraction (SECE) [1-2], energy investing [3] or Synchronized Switch Harvesting on Inductor (SSHI) [4] have been developed to maximize the extracted energy from harmonic excitations. However, in most of today's applications, vibrations are not periodic and mechanical shocks occur at unpredictable rates [4]. SSHI interfaces naturally seemed to be the most appropriate candidate for harvesting shocks as they exhibit outstanding performance in periodic excitations [4]. However, the SSHI strategy presents inherent weaknesses while harvesting shocks, since the invested energy stored in the piezoelectric capacitance cannot be recovered. In this work, we propose a self-starting, battery-less, 0.55mm 2 integrated energy harvesting interface based on SECE strategy which has been optimized to work under shock stimulus. Due to the sporadic nature of mechanical shocks which imply long periods of inactivity and brief energy peaks, the interface's average consumption is optimized by minimizing the quiescent power. A dedicated energy saving sequencing has thus been designed, reducing the static current to 30nA and enabling energy to be extracted with only one single 8$μ$J shock occurring every 100s. Our SECE-based circuit features a shock FoM 1.6x greater than previous SSHI-based interfaces [4]. The proposed system depicted in Fig.1 is made of a negative voltage converter rectifying the PEH output voltage, and a SECE power path controlled by a sequenced circuit. The sequencing is divided in 4 phases and the associated time diagrams are illustrated in Fig.2. During the sleeping mode T1, all blocks except the shock detection (SD) are turned off. During the starting phase, the energy is stored in CASIC through a cold-start path, increasing VASIC. This will progressively turn on the SD. Next, when stress applied to the piezoelectric material leads to an increase in VREC, the SD checks if the electrical energy
△ Less
Submitted 20 March, 2018;
originally announced March 2018.
-
Three dimensional finite temperature SU(3) gauge theory near the phase transition
Authors:
Piotr Bialas,
Lukasz Daniel,
Andre Morel,
Bengt Petersson
Abstract:
We have measured the correlation function of Polyakov loops on the lattice in three dimensional SU(3) gauge theory near its finite temperature phase transition. Using a new and powerful application of finite size scaling, we furthermore extend the measurements of the critical couplings to considerably larger values of the lattice sizes, both in the temperature and space directions, than was invest…
▽ More
We have measured the correlation function of Polyakov loops on the lattice in three dimensional SU(3) gauge theory near its finite temperature phase transition. Using a new and powerful application of finite size scaling, we furthermore extend the measurements of the critical couplings to considerably larger values of the lattice sizes, both in the temperature and space directions, than was investigated earlier in this theory. With the help of these measurements we perform a detailed finite size scaling analysis, showing that for the critical exponents of the two dimensional three state Potts model the mass and the susceptibility fall on unique scaling curves. This strongly supports the expectation that the gauge theory is in the same universality class. The Nambu-Goto string model on the other hand predicts that the exponent νhas the mean field value, which is quite different from the value in the abovementioned Potts model. Using our values of the critical couplings we also determine the continuum limit of the value of the critical temperature in terms of the square root of the zero temperature string tension. This value is very near to the prediction of the Nambu-Goto string model in spite of the different critical behaviour.
△ Less
Submitted 18 February, 2013; v1 submitted 14 November, 2012;
originally announced November 2012.
-
Three dimensional finite temperature SU(3) gauge theory in the confined region and the string picture
Authors:
P. Bialas,
L. Daniel,
A. Morel,
B. Petersson
Abstract:
We determine the correlation between Polyakov loops in three dimensional SU(3) gauge theory in the confined region at finite temperature. For this purpose we perform lattice calculations for the number of steps in the temperature direction equal to six. This is expected to be in the scaling region of the lattice theory. We compare the results to the bosonic string model. The agreement is very go…
▽ More
We determine the correlation between Polyakov loops in three dimensional SU(3) gauge theory in the confined region at finite temperature. For this purpose we perform lattice calculations for the number of steps in the temperature direction equal to six. This is expected to be in the scaling region of the lattice theory. We compare the results to the bosonic string model. The agreement is very good for temperatures T<0.7T_c, where T_c is the critical temperature. In the region 0.7T_c<T<T_c we enter the critical region, where the critical properties of the correlations are fixed by universality to be those of the two dimensional three state Potts model. Nevertheless, by calculating the critical lattice coupling, we show that the ratio of the critical temperature to the square root of the zero temperature string tension, where the latter is taken from the literature, remains very near to the string model prediction.
△ Less
Submitted 1 December, 2009;
originally announced December 2009.
-
Thermodynamics of SU(3) Gauge Theory in 2 + 1 Dimensions
Authors:
P. Bialas,
L. Daniel,
A. Morel,
B. Petersson
Abstract:
The pressure, and the energy and entropy densities are determined for the SU(3) gauge theory in $2 + 1$ dimensions from lattice Monte Carlo calculations in the interval $0.6 \leq T/T_c \leq 15$. The finite temperature lattices simulated have temporal extent $N_τ= 2, 4, 6$ and 8, and spatial volumes $N_S^2$ such that the aspect ratio is $N_S/N_τ= 8$. To obtain the thermodynamical quantities, we c…
▽ More
The pressure, and the energy and entropy densities are determined for the SU(3) gauge theory in $2 + 1$ dimensions from lattice Monte Carlo calculations in the interval $0.6 \leq T/T_c \leq 15$. The finite temperature lattices simulated have temporal extent $N_τ= 2, 4, 6$ and 8, and spatial volumes $N_S^2$ such that the aspect ratio is $N_S/N_τ= 8$. To obtain the thermodynamical quantities, we calculate the averages of the temporal plaquettes $P_τ$ and the spatial plaquettes $P_S$ on these lattices. We also need the zero temperature averages of the plaquettes $P_0$, calculated on symmetric lattices with $N_τ= N_S$. We discuss in detail the finite size ($N_S$-dependent) effects. These disappear exponentially. For the zero temperature lattices we find that the coefficient of $N_S$ in the exponent is of the order of the glueball mass. On the finite temperature lattices it lies between the two lowest screening masses. For the aspect ratio equal to eight, the systematic errors coming from the finite size effects are much smaller than our statistical errors. We argue that in the continuum limit, at high enough temperature, the pressure can be parametrized by the very simple formula $p=a-bT_c/T$ where $a$ and $b$ are two constants. Using the thermodynamical identities for a large homogeneous system, this parametrization then determines the other thermodynamical variables in the same temperature range.
△ Less
Submitted 21 July, 2008; v1 submitted 7 July, 2008;
originally announced July 2008.
-
SU(3) gauge theory at finite temperature in 2 + 1 dimensions
Authors:
P. Bialas,
L. Daniel,
A. Morel,
B. Petersson
Abstract:
In this article we will discuss numerical results on screening masses and thermodynamic quantities in 2 + 1 dimensional SU(3) gauge theory. We will also compare them to perturbation theory and the dimensionally reduced model.
In this article we will discuss numerical results on screening masses and thermodynamic quantities in 2 + 1 dimensional SU(3) gauge theory. We will also compare them to perturbation theory and the dimensionally reduced model.
△ Less
Submitted 28 February, 2007; v1 submitted 29 June, 2006;
originally announced June 2006.
-
A Gauge Theory of Wilson Lines as a Dimensionally Reduced Model of QCD_3
Authors:
P. Bialas,
A. Morel,
B. Petersson
Abstract:
We analyze a two dimensional SU(3) gauge model of Wilson lines as a dimensionally reduced model of high temperature QCD_3. In contrast to perturbative dimensional reduction it has an explicit global Z(3) symmetry in the action. The phase diagram of the model is studied in the space of two free parameters used to describe the self interaction of the Wilson lines. In addition to the confinement-de…
▽ More
We analyze a two dimensional SU(3) gauge model of Wilson lines as a dimensionally reduced model of high temperature QCD_3. In contrast to perturbative dimensional reduction it has an explicit global Z(3) symmetry in the action. The phase diagram of the model is studied in the space of two free parameters used to describe the self interaction of the Wilson lines. In addition to the confinement-deconfinement transition, the model also exhibits a new Z(3)-breaking phase. These findings are obtained by numerical simulations, and supported by a perturbative calculation to one loop. A screening mass from Polyakov loop correlations is calculated numerically. It matches the known QCD_3 mass in a domain of parameters belonging to the normal deconfined phase.
△ Less
Submitted 22 October, 2004; v1 submitted 27 March, 2004;
originally announced March 2004.
-
Dimensional reduction in QCD: Lessons from lower dimensions
Authors:
P. Bialas,
A. Morel,
B. Petersson
Abstract:
In this contribution we present the results of a series of investigations of dimensional reduction, applied to SU(3) gauge theory in 2 + 1 dimensions. We review earlier results, present a new reduced model with Z(3) symmetry, and discuss the results of numerical simulations of this model.
In this contribution we present the results of a series of investigations of dimensional reduction, applied to SU(3) gauge theory in 2 + 1 dimensions. We review earlier results, present a new reduced model with Z(3) symmetry, and discuss the results of numerical simulations of this model.
△ Less
Submitted 19 March, 2004;
originally announced March 2004.
-
Dimensional reduction and a Z(3) symmetric model
Authors:
P. Bialas,
A. Morel,
B. Petersson
Abstract:
We present first results from a numerical investigation of a Z(3) symmetric model based on dimensional reduction.
We present first results from a numerical investigation of a Z(3) symmetric model based on dimensional reduction.
△ Less
Submitted 30 September, 2003;
originally announced September 2003.
-
Z(3) Symmetric Dimensional Reduction of (2+1)D QCD
Authors:
P. Bialas,
A. Morel,
B. Petersson,
K. Petrov
Abstract:
Here we present a candidate for a Z(3)-symmetric reduced action for the description of the (2+1)D SU(3) gauge theory
Here we present a candidate for a Z(3)-symmetric reduced action for the description of the (2+1)D SU(3) gauge theory
△ Less
Submitted 22 January, 2002; v1 submitted 6 December, 2001;
originally announced December 2001.
-
Screening Masses in Dimensionally Reduced (2+1)D Gauge Theory
Authors:
P. Bialas,
A. Morel,
B. Petersson,
K. Petrov
Abstract:
We discuss the screening masses and residue factorisation of the SU(3) (2+1)D theory in the dimensional reduction formalism. The phase structure of the reduced model is also investigated.
We discuss the screening masses and residue factorisation of the SU(3) (2+1)D theory in the dimensional reduction formalism. The phase structure of the reduced model is also investigated.
△ Less
Submitted 30 October, 2001;
originally announced October 2001.
-
QCD with Adjoint Scalars in 2D: Properties in the Colourless Scalar Sector
Authors:
P. Bialas,
A. Morel,
B. Petersson,
K. Petrov,
T. Reisz
Abstract:
We present a numerical study of an SU(3) gauged 2D model for adjoint scalar fields, defined by dimensional reduction of pure gauge QCD in (2+1)D at high temperature. In the symmetric phase of its global Z_2 symmetry, two colourless boundstates, even and odd under Z_2, are identified. Their respective contributions (poles) in correlation functions of local composite operators A_n of degree n=2p a…
▽ More
We present a numerical study of an SU(3) gauged 2D model for adjoint scalar fields, defined by dimensional reduction of pure gauge QCD in (2+1)D at high temperature. In the symmetric phase of its global Z_2 symmetry, two colourless boundstates, even and odd under Z_2, are identified. Their respective contributions (poles) in correlation functions of local composite operators A_n of degree n=2p and 2p+1 in the scalar fields (p=1,2) fulfill factorization. The contributions of two particle states (cuts) are detected. Their size agrees with estimates based on a meanfield-like decomposition of the p=2 operators into polynomials in p=1 operators. No sizable signal in any A_n correlation can be attributed to 1/n times a Debye screening length associated with n elementary fields. These results are quantitatively consistent with the picture of scalar ``matter'' fields confined within colourless boundstates whose residual ``strong'' interactions are very weak.
△ Less
Submitted 23 March, 2001; v1 submitted 15 December, 2000;
originally announced December 2000.
-
High Temperature 3D QCD: Dimensional Reduction at Work
Authors:
P. Bialas,
A. Morel,
B. Petersson,
K. Petrov,
T. Reisz
Abstract:
We investigate the three-dimensional SU(3) gauge theory at finite temperature in the framework of dimensional reduction. The large scale properties of this theory are expected to be conceptually more complicated than in four dimensions. The dimensionally reduced action is computed in closed analytical form. The resulting effective two-dimensional theory is studied numerically both in the electri…
▽ More
We investigate the three-dimensional SU(3) gauge theory at finite temperature in the framework of dimensional reduction. The large scale properties of this theory are expected to be conceptually more complicated than in four dimensions. The dimensionally reduced action is computed in closed analytical form. The resulting effective two-dimensional theory is studied numerically both in the electric and magnetic sector. We find that dimensional reduction works excellently down to temperatures of 1.5 times the deconfinement phase transition temperature and even on rather short length scales. We obtain strong evidence that for ${\rm QCD}_3$, even at high temperature the colour averaged potential is represented by the exchange of a single state, at variance with the usual Debye screening picture involving a pair of electric gluons.
△ Less
Submitted 3 March, 2000;
originally announced March 2000.
-
Condensation and Metastability in the 2D Potts Model
Authors:
J. L. Meunier,
A. Morel
Abstract:
For the first order transition of the Ising model below $T_c$, Isakov has proven that the free energy possesses an essential singularity in the applied field. Such a singularity in the control parameter, anticipated by condensation theory, is believed to be a generic feature of first order transitions, but too weak to be observable. We study these issues for the temperature driven transition of…
▽ More
For the first order transition of the Ising model below $T_c$, Isakov has proven that the free energy possesses an essential singularity in the applied field. Such a singularity in the control parameter, anticipated by condensation theory, is believed to be a generic feature of first order transitions, but too weak to be observable. We study these issues for the temperature driven transition of the $q$ states 2D Potts model at $q>q_c=4$. Adapting the droplet model to this case, we relate its parameters to the critical properties at $q_c$ and confront the free energy to the many informations brought by previous works. The essential singularity predicted at the transition temperature leads to observable effects in numerical data. On a finite lattice, a metastability domain of temperatures is identified, which shrinks to zero in the thermodynamical limit. ~
△ Less
Submitted 29 March, 1999;
originally announced March 1999.
-
An investigation of the 2D attractive Hubbard model
Authors:
R. Lacaze,
A. Morel,
B. Petersson,
J. Schroper
Abstract:
We present an investigation of the 2D attractive Hubbard model, considered as an effective model relevant to superconductivity in strongly interacting electron systems. We use both hybrid Monte Carlo simulations and existing hopping parameter expansions to explore the low temperature domain. The increaseof the static S-wave pair correlation with decreasing temperature is analyzed in terms of an…
▽ More
We present an investigation of the 2D attractive Hubbard model, considered as an effective model relevant to superconductivity in strongly interacting electron systems. We use both hybrid Monte Carlo simulations and existing hopping parameter expansions to explore the low temperature domain. The increaseof the static S-wave pair correlation with decreasing temperature is analyzed in terms of an expected Kosterlitz-Thouless superconducting transition. The evidence for this transition is weak: If it exists, its temperature is very low and depends weakly on the band filling near half filling. The number of unpaired electrons remains nearly constant with temperature at fixed attractive potential strength. In contrast, the static magnetic susceptibility decreases fast with temperature, and cannot be related only to pair formation. We introduce a method by which the Pade approximants of the existing series for the susceptibility give sensible results down to rather low temperature region, as shown by comparison with our numerical data.
△ Less
Submitted 28 October, 1996;
originally announced October 1996.
-
Large q expansion of the 2D q-states Potts model
Authors:
T. Bhattacharya,
R. Lacaze,
A. Morel
Abstract:
We present a recursive method to calculate a large q expansion of the 2d q-states Potts model free energies based on the Fortuin-Kasteleyn representation of the model. With this procedure, we compute directly the ordered phase partition function up to order 10 in 1/sqrt{q}. The energy cumulants at the transition can be obtained with suitable resummation and come out large for q less or around 15…
▽ More
We present a recursive method to calculate a large q expansion of the 2d q-states Potts model free energies based on the Fortuin-Kasteleyn representation of the model. With this procedure, we compute directly the ordered phase partition function up to order 10 in 1/sqrt{q}. The energy cumulants at the transition can be obtained with suitable resummation and come out large for q less or around 15. As a consequence, expansions of the free energies around the transition temperature are useless for not large enough values of q. In particular the pure phase specific heats are predicted to be much larger, at q < 15, than the values extracted from current finite size scaling analysis of extrema, whereas they agree very well with recent values extracted at the transition point.
△ Less
Submitted 18 January, 1996;
originally announced January 1996.
-
Large Energy Cumulants in the 2D Potts Model and their Effects in Finite Size Analysis
Authors:
T. Bhattacharya,
R. Lacaze,
A. Morel
Abstract:
We develop an ansatz for expressing the free energy of the two dimensional $q$-states Potts model for $q > 4$ near its first order phase transition point. We notice that for the moderate values of $ q \lesssim 15 $, the energy profile at the phase transition is not expressible as a sum of gaussians. We discuss how this affects the traditional finite size analysis of this phase transition. In par…
▽ More
We develop an ansatz for expressing the free energy of the two dimensional $q$-states Potts model for $q > 4$ near its first order phase transition point. We notice that for the moderate values of $ q \lesssim 15 $, the energy profile at the phase transition is not expressible as a sum of gaussians. We discuss how this affects the traditional finite size analysis of this phase transition. In particular, the dominant length scale governing the finite size corrections turns out to be much (${} \sim 6$ ~times) larger than the largest correlation length in the problem.
△ Less
Submitted 8 July, 1994;
originally announced July 1994.
-
The free energy of the Potts model: from the continuous to the first-order transition region
Authors:
T. Bhattacharya,
R. Lacaze,
A. Morel
Abstract:
We present a large $q$ expansion of the 2d $q$-states Potts model free energies up to order 9 in $1/\sqrt{q}$. Its analysis leads us to an ansatz which, in the first-order region, incorporates properties inferred from the known critical regime at $q=4$, and predicts, for $q>4$, the $n^{\rm th}$ energy cumulant scales as the power $(3 n /2-2)$ of the correlation length. The parameter-free energy…
▽ More
We present a large $q$ expansion of the 2d $q$-states Potts model free energies up to order 9 in $1/\sqrt{q}$. Its analysis leads us to an ansatz which, in the first-order region, incorporates properties inferred from the known critical regime at $q=4$, and predicts, for $q>4$, the $n^{\rm th}$ energy cumulant scales as the power $(3 n /2-2)$ of the correlation length. The parameter-free energy distributions reproduce accurately, without reference to any interface effect, the numerical data obtained in a simulation for $q=10$ with lattices of linear dimensions up to L=50. The pure phase specific heats are predicted to be much larger, at $q\leq10$, than the values extracted from current finite size scaling analysis of extrema. Implications for safe numerical determinations of interface tensions are discussed.
△ Less
Submitted 12 March, 1993;
originally announced March 1993.