-
Overview of LLRF System for iBNCT Accelerator
Authors:
Z. Fang,
K. Futatsukawa,
Y. Fukui,
T. Obina,
Y. Honda,
F. Qiu,
T. Sugimura,
S. Michizono,
S. Anami,
F. Naito,
H. Kobayashi,
T. Kurihara,
M. Sato,
T. Miyajima,
T. Ohba,
N. Nagura
Abstract:
At the Ibaraki Neutron Medical Research Center, an accelerator-based neutron source for iBNCT (Ibaraki - Boron Neutron Capture Therapy) is being developed using an 8-MeV proton linac and a beryllium-based neutron production target. The proton linac consists of an RFQ and a DTL, which is almost the same as the front part of J-PARC linac. However, here only one high-power klystron is used as the RF…
▽ More
At the Ibaraki Neutron Medical Research Center, an accelerator-based neutron source for iBNCT (Ibaraki - Boron Neutron Capture Therapy) is being developed using an 8-MeV proton linac and a beryllium-based neutron production target. The proton linac consists of an RFQ and a DTL, which is almost the same as the front part of J-PARC linac. However, here only one high-power klystron is used as the RF source to drive the two cavities, which have quite different Q-values and responses. From June 2016, a cPCI based digital feedback system was applied to the iBNCT accelerator. It serves not only as a controller for the feedback of acceleration fields, but also as a smart operator for the auto-tuning of the two cavities in the meantime, especially during the RF startup process to the full power. The details will be described in this report.
△ Less
Submitted 12 October, 2018;
originally announced October 2018.
-
Development of a DTL Quadrupole Magnet with a New Electroformed Hollow Coil for the Jaeri/Kek Joint Project
Authors:
K. Yoshino,
E. Takasaki,
F. Naito,
T. Kato,
Y. Yamazaki,
K. Tajiri,
T. Kawasumi,
Y. Imoto,
Z. Kabeya
Abstract:
Quadrupole electromagnets have been developed with a hollow coil produced using an improved periodic reverse electroforming. These will be installed in each of the drift tubes of the DTL (324 MHz) as part of the JAERI/KEK Joint Project at the high-intensity proton accelerator facility. Measurements of the magnets' properties were found to be consistent with computer-calculated estimated. The det…
▽ More
Quadrupole electromagnets have been developed with a hollow coil produced using an improved periodic reverse electroforming. These will be installed in each of the drift tubes of the DTL (324 MHz) as part of the JAERI/KEK Joint Project at the high-intensity proton accelerator facility. Measurements of the magnets' properties were found to be consistent with computer-calculated estimated. The details of the design, the fabrication process, and the measurement results for the quadrupole magnet are described.
△ Less
Submitted 19 August, 2000;
originally announced August 2000.
-
Development of the 50-Mev DTL for the Jaeri/Kek Joint Project
Authors:
F. Naito,
K. Yoshino,
C. Kubota,
T. Kato,
Y. Saito,
E. Takasaki,
Y. Yamazaki,
S. Kobayashi,
K. Sekikawa,
M. Shibusawa,
Z. Kabeya,
K. Tajiri,
T. Kawasumi
Abstract:
An Alvaretz-type DTL, to accelerate the H- ion beam from 3 to 50 MeV, is being constructed as the injector for the JAERI/KEK Joint Project. The following components of the DTL have been developed: (1) a cylindrical tank, made by copper electroforming; (2) rf contactors; (3) a pulse-excited quadrupole magnet with a hollow coil made by copper electroforming; (4) a switching-regulator-type pulsed-p…
▽ More
An Alvaretz-type DTL, to accelerate the H- ion beam from 3 to 50 MeV, is being constructed as the injector for the JAERI/KEK Joint Project. The following components of the DTL have been developed: (1) a cylindrical tank, made by copper electroforming; (2) rf contactors; (3) a pulse-excited quadrupole magnet with a hollow coil made by copper electroforming; (4) a switching-regulator-type pulsed-power supply for the quadrupole magnet. High-power tests of the components have been conducted using a short-model tank. Moreover a breakdown experiment of the copper electrodes has been carried out in order to study the properties of several kinds of copper materials.
△ Less
Submitted 21 August, 2000; v1 submitted 19 August, 2000;
originally announced August 2000.
