-
RISTRETTO: reflected-light exoplanet spectroscopy at the diffraction limit of the VLT
Authors:
Christophe Lovis,
Nicolas Blind,
Bruno Chazelas,
Muskan Shinde,
Maddalena Bugatti,
Nathanaël Restori,
Isaac Dinis,
Ludovic Genolet,
Ian Hughes,
Michaël Sordet,
Robin Schnell,
Samuel Rihs,
Adrien Crausaz,
Martin Turbet,
Nicolas Billot,
Thierry Fusco,
Benoit Neichel,
Jean-François Sauvage,
Pablo Santos Diaz,
Mathilde Houelle,
Joshua Blackman,
Audrey Lanotte,
Jonas Kühn,
Janis Hagelberg,
Olivier Guyon
, et al. (6 additional authors not shown)
Abstract:
RISTRETTO is a visible high-resolution spectrograph fed by an extreme adaptive optics (AO) system, to be proposed as a visitor instrument on ESO VLT. The main science goal of RISTRETTO is to pioneer the detection and atmospheric characterisation of exoplanets in reflected light, in particular the temperate rocky planet Proxima b. RISTRETTO will be able to measure albedos and detect atmospheric fea…
▽ More
RISTRETTO is a visible high-resolution spectrograph fed by an extreme adaptive optics (AO) system, to be proposed as a visitor instrument on ESO VLT. The main science goal of RISTRETTO is to pioneer the detection and atmospheric characterisation of exoplanets in reflected light, in particular the temperate rocky planet Proxima b. RISTRETTO will be able to measure albedos and detect atmospheric features in a number of exoplanets orbiting nearby stars for the first time. It will do so by combining a high-contrast AO system working at the diffraction limit of the telescope to a high-resolution spectrograph, via a 7-spaxel integral-field unit (IFU) feeding single-mode fibers. Further science cases for RISTRETTO include the study of accreting protoplanets such as PDS70b/c through spectrally-resolved H-alpha emission, and spatially-resolved studies of Solar System objects such as icy moons and the ice giants Uranus and Neptune. The project is in the manufacturing phase for the spectrograph sub-system, and the preliminary design phase for the AO front-end. Specific developments for RISTRETTO include a novel coronagraphic IFU combining a phase-induced amplitude apodizer (PIAA) to a 3D-printed microlens array feeding a bundle of single-mode fibers. It also features an XAO system with a dual wavefront sensor aiming at high robustness and sensitivity, including to pupil fragmentation. RISTRETTO is a pathfinder instrument in view of similar developments at the ELT, in particular the SCAO-IFU mode of ELT-ANDES and the future ELT-PCS instrument.
△ Less
Submitted 4 September, 2024;
originally announced September 2024.
-
ANDES, the high resolution spectrograph for the ELT: science goals, project overview and future developments
Authors:
A. Marconi,
M. Abreu,
V. Adibekyan,
V. Alberti,
S. Albrecht,
J. Alcaniz,
M. Aliverti,
C. Allende Prieto,
J. D. Alvarado Gómez,
C. S. Alves,
P. J. Amado,
M. Amate,
M. I. Andersen,
S. Antoniucci,
E. Artigau,
C. Bailet,
C. Baker,
V. Baldini,
A. Balestra,
S. A. Barnes,
F. Baron,
S. C. C. Barros,
S. M. Bauer,
M. Beaulieu,
O. Bellido-Tirado
, et al. (264 additional authors not shown)
Abstract:
The first generation of ELT instruments includes an optical-infrared high-resolution spectrograph, indicated as ELT-HIRES and recently christened ANDES (ArmazoNes high Dispersion Echelle Spectrograph). ANDES consists of three fibre-fed spectrographs ([U]BV, RIZ, YJH) providing a spectral resolution of $\sim$100,000 with a minimum simultaneous wavelength coverage of 0.4-1.8 $μ$m with the goal of ex…
▽ More
The first generation of ELT instruments includes an optical-infrared high-resolution spectrograph, indicated as ELT-HIRES and recently christened ANDES (ArmazoNes high Dispersion Echelle Spectrograph). ANDES consists of three fibre-fed spectrographs ([U]BV, RIZ, YJH) providing a spectral resolution of $\sim$100,000 with a minimum simultaneous wavelength coverage of 0.4-1.8 $μ$m with the goal of extending it to 0.35-2.4 $μ$m with the addition of a U arm to the BV spectrograph and a separate K band spectrograph. It operates both in seeing- and diffraction-limited conditions and the fibre feeding allows several, interchangeable observing modes including a single conjugated adaptive optics module and a small diffraction-limited integral field unit in the NIR. Modularity and fibre-feeding allow ANDES to be placed partly on the ELT Nasmyth platform and partly in the Coudé room. ANDES has a wide range of groundbreaking science cases spanning nearly all areas of research in astrophysics and even fundamental physics. Among the top science cases, there are the detection of biosignatures from exoplanet atmospheres, finding the fingerprints of the first generation of stars, tests on the stability of Nature's fundamental couplings, and the direct detection of the cosmic acceleration. The ANDES project is carried forward by a large international consortium, composed of 35 Institutes from 13 countries, forming a team of almost 300 scientists and engineers which include the majority of the scientific and technical expertise in the field that can be found in ESO member states.
△ Less
Submitted 19 July, 2024;
originally announced July 2024.
-
Striving towards robust phase diversity on-sky: Implementing LIFT for VLT/MUSE-NFM
Authors:
Arseniy Kuznetsov,
Sylvain Oberti,
Benoit Neichel,
Thierry Fusco
Abstract:
The recent IRLOS upgrade for VLT/MUSE narrow field mode (NFM) introduced a full-pupil mode to enhance sensitivity and sky coverage. This involved replacing the 2x2 Shack-Hartmann sensor with a single lens for full-aperture photon collection, which also enabled the engagement of the linearized focal-plane technique (LIFT) wavefront sensor instead. However, initial on-sky LIFT experiments have highl…
▽ More
The recent IRLOS upgrade for VLT/MUSE narrow field mode (NFM) introduced a full-pupil mode to enhance sensitivity and sky coverage. This involved replacing the 2x2 Shack-Hartmann sensor with a single lens for full-aperture photon collection, which also enabled the engagement of the linearized focal-plane technique (LIFT) wavefront sensor instead. However, initial on-sky LIFT experiments have highlighted a complex point spread function (PSF) structure due to strong and polychromatic non-common path aberrations (NCPAs), complicating the accurate retrieval of tip-tilt and focus using LIFT. This study aims to conduct the first on-sky validation of LIFT on VLT/UT4, outline challenges encountered during the tests, and propose solutions for increasing the robustness of LIFT in on-sky operations. We developed a two-stage approach to focal-plane wavefront sensing, where tip-tilt and focus retrieval done with LIFT is preceded by the NCPA calibration step. The resulting NCPA estimate is subsequently used by LIFT. To perform the calibration, we proposed a method capable of retrieving the information about NCPAs directly from on-sky focal-plane PSFs. We verified the efficacy of this approach in simulated and on-sky tests. Our results demonstrate that adopting the two-stage approach has led to a significant improvement in the accuracy of the defocus estimation performed by LIFT, even under challenging low-flux conditions. The efficacy of LIFT as a slow and truth focus sensor in practical scenarios has been demonstrated. However, integrating NCPA calibration with LIFT is essential to verifying its practical application in the real system. Additionally, the proposed calibration step can serve as an independent and minimally invasive approach to evaluate NCPA on-sky.
△ Less
Submitted 12 June, 2024;
originally announced June 2024.
-
Cassiopée, towards technological development for XAO on ELT: the e-APD infrared detector
Authors:
Jean-Luc Gach,
Piero Bruno,
Julien Charton,
Philippe Feautrier,
Thierry Fusco,
Benoit Neichel,
Jean-François Sauvage
Abstract:
The Cassiopée project aims to develop the key technologies that will be used to deploy very high-performance Adaptive Optics for future ELTs. The ultimate challenge is to detect earth-like planets and characterize the composition of their atmosphere. For this, imaging contrasts of the order of 109 are required, implying a leap forward in adaptive optics performance, with high density deformable mi…
▽ More
The Cassiopée project aims to develop the key technologies that will be used to deploy very high-performance Adaptive Optics for future ELTs. The ultimate challenge is to detect earth-like planets and characterize the composition of their atmosphere. For this, imaging contrasts of the order of 109 are required, implying a leap forward in adaptive optics performance, with high density deformable mirrors (120x120 actuators), low-noise cameras and the control of the loop at few kHz. The project brings together 2 industrial partners: First Light Imaging and ALPAO, and 2 academic partners: ONERA and LAM, who will work together to develop a new camera for wavefront sensing, a new deformable mirror and their implementation in an adaptive optics loop. This paper will present the development of the fast large infrared e-APD camera which will be used in the wavefront sensor of the system. The camera will integrate the latest 512x512 Leonardo e-APD array and will benefit from the heritage of the first-light imaging's C-RED One camera. The most important challenges for the application are the autonomous operation, vibration control, background limitation, compactness, acquisition speed and latency.
△ Less
Submitted 1 June, 2024;
originally announced June 2024.
-
Transformer neural networks for closed-loop adaptive optics using non-modulated pyramid wavefront sensors
Authors:
Camilo Weinberger,
Jorge Tapia,
Benoit Neichel,
Esteban Vera
Abstract:
The Pyramid Wavefront Sensor (PyWFS) is highly nonlinear and requires the use of beam modulation to successfully close an AO loop under varying atmospheric turbulence conditions, at the expense of a loss in sensitivity. In this work we train, analyse, and compare the use of deep neural networks (NNs) as non-linear estimators for the non-modulated PyWFS, identifying the most suitable NN architectur…
▽ More
The Pyramid Wavefront Sensor (PyWFS) is highly nonlinear and requires the use of beam modulation to successfully close an AO loop under varying atmospheric turbulence conditions, at the expense of a loss in sensitivity. In this work we train, analyse, and compare the use of deep neural networks (NNs) as non-linear estimators for the non-modulated PyWFS, identifying the most suitable NN architecture for reliable closed-loop AO. We develop a novel training strategy for NNs that seeks to accommodate for changes in residual statistics between open and closed-loop, plus the addition of noise for robustness purposes. Through simulations, we test and compare several deep NNs, from classical to new convolutional neural networks (CNNs), plus a state-of-the-art transformer neural network (TNN, Global Context Visual Transformer, GCViT), first in open-loop and then in closed-loop. Using open-loop simulated data, we observe that a TNN (GCViT) largely surpasses any CNN in estimation accuracy in a wide range of turbulence conditions. Also, the TNN performs better in simulated closed-loop than CNNs, avoiding estimation issues at the pupil borders. When closing the loop at strong turbulence and low noise, the TNN using non-modulated PyWFS data is able to close the loop similar to a PyWFS with $12λ/D$ of modulation. When raising the noise only the TNN is able to close the loop, while the standard linear reconstructor fails, even with modulation. Using the GCViT, we close a real AO loop in the optical bench achieving a Strehl ratio between 0.28 and 0.77 for turbulence conditions ranging from 6cm to 20cm, respectively. In conclusion, we demonstrate that a TNN is the most suitable architecture to extend the dynamic range without sacrificing sensitivity for a non-modulated PyWFS. It opens the path for using non-modulated Pyramid WFSs under an unprecedented range of atmospheric and noise conditions.
△ Less
Submitted 8 May, 2024;
originally announced May 2024.
-
Expected performance of the Pyramid wavefront sensor with a laser guide star for 40 m class telescopes
Authors:
Francisco Oyarzún,
Vincent Chambouleyron,
Benoit Neichel,
Thierry Fusco,
Andrés Guesalaga
Abstract:
The use of artificial Laser Guide Stars (LGS) is planned for the new generation of giant segmented mirror telescopes, to extend the sky coverage of their adaptive optics systems. The LGS, being a 3D object at a finite distance will have a large elongation that will affect its use with the Shack-Hartmann (SH) wavefront sensor. In this paper, we compute the expected performance for a Pyramid WaveFro…
▽ More
The use of artificial Laser Guide Stars (LGS) is planned for the new generation of giant segmented mirror telescopes, to extend the sky coverage of their adaptive optics systems. The LGS, being a 3D object at a finite distance will have a large elongation that will affect its use with the Shack-Hartmann (SH) wavefront sensor. In this paper, we compute the expected performance for a Pyramid WaveFront Sensor (PWFS) using a LGS for a 40 m telescope affected by photon noise, and also extend the analysis to a flat 2D object as reference. We developed a new way to discretize the LGS, and a new, faster method of propagating the light for any Fourier Filtering wavefront sensors (FFWFS) when using extended objects. We present the use of a sensitivity model to predict the performance of a closed-loop adaptive optic system. We optimized a point source calibrated interaction matrix to accommodate the signal of an extended object, by means of computing optical gains using a convolutional model. We found that the sensitivity drop, given the size of the extended laser source, is large enough to make the system operate in a low-performance regime given the expected return flux of the LGS. The width of the laser beam, rather than the thickness of the sodium layer was identified as the limiting factor. Even an ideal, flat LGS will have a drop in performance due to the flux of the LGS, and small variations in the return flux will result in large variations in performance. We conclude that knife-edge-like wavefront sensors, such as the PWFS, are not recommended for their use with LGS for a 40 m telescope, as they will operate in a low-performance regime, given the size of the extended object.
△ Less
Submitted 15 March, 2024;
originally announced March 2024.
-
Strategy for sensing petal mode in presence of AO residual turbulence with pyramid wavefront sensor
Authors:
Nicolas Levraud,
Vincent Chambouleyron,
Jean François Sauvage,
Benoit Neichel,
Mahawa Cisse,
Olivier Fauvarque,
Guido Agapito,
Cédric Plantet,
Anne Laure Cheffot,
Enrico Pinna,
Simone Esposito2,
Thierry Fusco
Abstract:
With the Extremely Large Telescope-generation telescopes come new challenges. The complexity of these telescopes' pupil creates new problems for Adaptive Optics. In particular, the large spiders necessary to support the massive optics of these telescopes create discontinuities in the wavefront measurement. These discontinuities appear as a new phase error dubbed the `petal mode'. This error is des…
▽ More
With the Extremely Large Telescope-generation telescopes come new challenges. The complexity of these telescopes' pupil creates new problems for Adaptive Optics. In particular, the large spiders necessary to support the massive optics of these telescopes create discontinuities in the wavefront measurement. These discontinuities appear as a new phase error dubbed the `petal mode'. This error is described as a differential piston between the fragment of the pupil separated by the spiders and is responsible for reducing the European Extremely Large Telescope's (ELT) resolution to a 15m telescope resolution. The aim of this paper is to study the measurement of the petal mode by adaptive optics sensors. We want to understand why the Pyramid Wavefront Sensor (PyWFS) cannot measure this petal mode under normal conditions and how to allow this measurement by adapting the Adaptive optics control scheme and the PyWFS. To facilitate our study, we consider a simplified version of the petal mode, featuring a simpler pupil than the ELT. We studied specifically how a system that separates the atmospheric turbulence from the petal measurement would behave. The unmodulated PyWFS (uPyWFS) but the uPyWFS does not make accurate measurements in the presence of atmospheric residuals. Studying the petal mode's power spectral density, we propose a filtering step, consisting of a pinhole around the pyramid tip. This reduces the first path residuals seen by the uPyWFS and restores its accuracy. Finally, we demonstrate our proposed system with end-to-end simulations.To address the petal problem, a two-path adaptive optics with a sensor dedicated to the measurement of the petal mode seems necessary. Through this paper, we demonstrate that an uPyWFS can confuse the petal mode with the residuals from the first path. However, adding a spatial filter on top of said uPyWFS makes it a good petalometer candidate.
△ Less
Submitted 15 January, 2024;
originally announced January 2024.
-
Adaptive Optics Telemetry Standard: Design and specification of a novel data exchange format
Authors:
Tiago Gomes,
Carlos M. Correia,
Lisa Bardou,
Sylvain Cetre,
Johann Kolb,
Caroline Kulcsár,
François Leroux,
Timothy Morris,
Nuno Morujão,
Benoît Neichel,
Jean-Luc Beuzit,
Paulo Garcia
Abstract:
The amount of Adaptive Optics (AO) telemetry generated by VIS/NIR ground-based observatories is ever greater, leading to a growing need for a standardised data exchange format to support performance analysis and AO research and development activities that involve large-scale telemetry mining, processing, and curation. This paper introduces the Adaptive Optics Telemetry (AOT) data exchange format a…
▽ More
The amount of Adaptive Optics (AO) telemetry generated by VIS/NIR ground-based observatories is ever greater, leading to a growing need for a standardised data exchange format to support performance analysis and AO research and development activities that involve large-scale telemetry mining, processing, and curation. This paper introduces the Adaptive Optics Telemetry (AOT) data exchange format as a standard for sharing AO telemetry from visible/infrared ground-based observatories. AOT is based on the Flexible Image Transport System (FITS) and aims to provide unambiguous and consistent data access across various systems and configurations, including natural and single/multiple laser guide-star AO systems. We designed AOT focused on two key use cases: atmospheric turbulence parameter estimation and point-spread function reconstruction (PSF-R). We prototyped and tested the design using existing AO telemetry datasets from multiple systems: single conjugate with natural and laser guide stars, tomographic systems with multi-channel wavefront sensors, single and multi wavefront correctors in systems featuring either a Shack-Hartmann or Pyramid as main wavefront sensors. The AOT file structure has been thoroughly defined, specifying data fields, descriptions, data types, units, and expected dimensions. To support this format, we have developed a Python package that enables data conversion, reading, writing and exploration of AOT files, which has been made publicly available and compatible with a general-purpose Python package manager. We demonstrate the flexibility of the AOT format by packaging data from five different instruments, installed on different telescopes.
△ Less
Submitted 13 December, 2023;
originally announced December 2023.
-
TIPTOP: cone effect for single laser adaptive optics systems
Authors:
Guido Agapito,
Cédric Plantet,
Fabio Rossi,
Giulia Carlà,
Anne-Laure Cheffot,
Daniele Vassallo,
Arseniy Kuznetsov,
Simon Conseil,
Benoit Neichel
Abstract:
TIPTOP is a python library that is able to quickly compute Point Spread Functions (PSF) of any kind of Adaptive Optics systems. This library has multiple objectives: support the exposure time calculators of future VLT and ELT instruments, support adaptive optics systems design activities, be part of PSF reconstruction pipelines and support the selection of the best asterism of natural guide stars…
▽ More
TIPTOP is a python library that is able to quickly compute Point Spread Functions (PSF) of any kind of Adaptive Optics systems. This library has multiple objectives: support the exposure time calculators of future VLT and ELT instruments, support adaptive optics systems design activities, be part of PSF reconstruction pipelines and support the selection of the best asterism of natural guide stars for observation preparation. Here we report one of the last improvements of TIPTOP: the introduction of the error given by a single conjugated laser, commonly known as the cone effect. The Cone effect was not introduced before because it is challenging due to the non-stationarity of the phase. Laser guide stars are at a finite distance with respect to the telescope and probe beam accepted by the wavefront sensor has the shape of a cone. Given a single spatial frequency in an atmospheric layer, the cone effect arises from the apparent magnification or stretching of this frequency when it reaches the wavefront sensor. The magnification effect leads to an incorrect estimation of the spatial frequency. Therefore, we estimate the residual power by calculating the difference between two sinusoids with different periods: the nominal one and the magnified one. Replicating this for each spatial frequency we obtain the power spectrum associated with the cone effect. We compare this estimation with the one given by end-to-end simulation and we present how we plan to validate this with on-sky data.
△ Less
Submitted 12 October, 2023;
originally announced October 2023.
-
Improved prior for adaptive optics point spread function estimation from science images: Application for deconvolution
Authors:
A. Lau,
R. JL. Fétick,
B. Neichel,
O. Beltramo-Martin,
T. Fusco
Abstract:
Access to knowledge of the point spread function (PSF) of adaptive optics(AO)-assisted observations is still a major limitation when processing AO data. This limitation is particularly important when image analysis requires the use of deconvolution methods. As the PSF is a complex and time-varying function, reference PSFs acquired on calibration stars before or after the scientific observation can…
▽ More
Access to knowledge of the point spread function (PSF) of adaptive optics(AO)-assisted observations is still a major limitation when processing AO data. This limitation is particularly important when image analysis requires the use of deconvolution methods. As the PSF is a complex and time-varying function, reference PSFs acquired on calibration stars before or after the scientific observation can be too different from the actual PSF of the observation to be used for deconvolution, and lead to artefacts in the final image. We improved the existing PSF-estimation method based on the so-called marginal approach by enhancing the object prior in order to make it more robust and suitable for observations of resolved extended objects. Our process is based on a two-step blind deconvolution approach from the literature. The first step consists of PSF estimation from the science image. For this, we made use of an analytical PSF model, whose parameters are estimated based on a marginal algorithm. This PSF was then used for deconvolution. In this study, we first investigated the requirements in terms of PSF parameter knowledge to obtain an accurate and yet resilient deconvolution process using simulations. We show that current marginal algorithms do not provide the required level of accuracy, especially in the presence of small objects. Therefore, we modified the marginal algorithm by providing a new model for object description, leading to an improved estimation of the required PSF parameters. Our method fulfills the deconvolution requirement with realistic system configurations and different classes of Solar System objects in simulations. Finally, we validate our method by performing blind deconvolution with SPHERE/ZIMPOL observations of the Kleopatra asteroid.
△ Less
Submitted 16 March, 2023;
originally announced March 2023.
-
The ESO's Extremely Large Telescope Working Groups
Authors:
Paolo Padovani,
Michele Cirasuolo,
Remco van der Burg,
Faustine Cantalloube,
Elizabeth George,
Markus Kasper,
Kieran Leschinski,
Carlos Martins,
Julien Milli,
Sabine Möhler,
Mark Neeser,
Benoit Neichel,
Angel Otarola,
Rubén Sánchez-Janssen,
Benoit Serra,
Alain Smette,
Elena Valenti,
Christophe Verinaud,
Joël Vernet,
Olivier Absil,
Guido Agapito,
Morten Andersen,
Carmelo Arcidiacono,
Matej Arko,
Pierre Baudoz
, et al. (60 additional authors not shown)
Abstract:
Since 2005 ESO has been working with its community and industry to develop an extremely large optical/infrared telescope. ESO's Extremely Large Telescope, or ELT for short, is a revolutionary ground-based telescope that will have a 39-metre main mirror and will be the largest visible and infrared light telescope in the world. To address specific topics that are needed for the science operations an…
▽ More
Since 2005 ESO has been working with its community and industry to develop an extremely large optical/infrared telescope. ESO's Extremely Large Telescope, or ELT for short, is a revolutionary ground-based telescope that will have a 39-metre main mirror and will be the largest visible and infrared light telescope in the world. To address specific topics that are needed for the science operations and calibrations of the telescope, thirteen specific working groups were created to coordinate the effort between ESO, the instrument consortia, and the wider community. We describe here the goals of these working groups as well as their achievements so far.
△ Less
Submitted 28 February, 2023;
originally announced February 2023.
-
Modeling noise propagation in Fourier-filtering wavefront sensing, fundamental limits and quantitative comparison
Authors:
Vincent Chambouleyron,
Olivier Fauvarque,
Cédric Plantet,
Jean-François Sauvage,
Nicolas Levraud,
Mahawa Cissé,
Benoît Neichel,
Thierry Fusco
Abstract:
Adaptive optics (AO) is a technique allowing to drastically improve ground-based telescopes angular resolution. The wavefront sensor (WFS) is one of the key components of such systems, driving the fundamental performance limitations. In this paper, we focus on a specific class of WFS: the Fourier-filtering wavefront sensors (FFWFS). This class is known for its extremely high sensitivity. However,…
▽ More
Adaptive optics (AO) is a technique allowing to drastically improve ground-based telescopes angular resolution. The wavefront sensor (WFS) is one of the key components of such systems, driving the fundamental performance limitations. In this paper, we focus on a specific class of WFS: the Fourier-filtering wavefront sensors (FFWFS). This class is known for its extremely high sensitivity. However, a clear and comprehensive noise propagation model for any kind of FFWFS is lacking. Considering read-out noise and photon noise, we derive a simple and comprehensive model allowing to understand how these noises propagates in the phase reconstruction in the linear framework. This new noise propagation model works for any kind of FFWFS, and allows to revisit the fundamental sensitivity limit of these sensors. Furthermore, a new comparison between widely used FFWFS is held. We focus on the two main used FFWFS classes: the Zernike WFS (ZWFS) and the pyramid WFS (PWFS), bringing new understanding of their behavior.
△ Less
Submitted 6 January, 2023; v1 submitted 27 December, 2022;
originally announced December 2022.
-
Optimizing Fourier-Filtering WFS to reach sensitivity close to the fundamental limit
Authors:
Vincent Chambouleyron,
Olivier Fauvarque,
Cédric Plantet,
Jean-François Sauvage,
Nicolas Levraud,
Mahawa Cissé,
Benoît Neichel,
Thierry Fusco
Abstract:
To reach the full potential of the new generation of ground based telescopes, an extremely fine adjustment of the phase is required. Wavefront control and correction before detection has therefore become one of the cornerstones of instruments to achieve targeted performance, especially for high-contrast imaging. A crucial feature of accurate wavefront control leans on the wavefront sensor (WFS). W…
▽ More
To reach the full potential of the new generation of ground based telescopes, an extremely fine adjustment of the phase is required. Wavefront control and correction before detection has therefore become one of the cornerstones of instruments to achieve targeted performance, especially for high-contrast imaging. A crucial feature of accurate wavefront control leans on the wavefront sensor (WFS). We present a strategy to design new Fourier-Filtering WFS that encode the phase close from the fundamental photon efficiency limit. This strategy seems promising as it generates highly sensitive sensors suited for different pupil shape configurations.
△ Less
Submitted 23 October, 2022;
originally announced October 2022.
-
PSF nowcast using PASSATA simulations -- Towards a PSF forecast
Authors:
A. Turchi,
G. Agapito,
E. Masciadri,
O. Beltramo-Martin,
J. Milli,
C. Plantet,
F. Rossi,
E. Pinna,
J. F. Sauvage,
B. Neichel,
T. Fusco
Abstract:
Characterizing the PSF of adaptive optics instruments is of paramount importance both for instrument design and observation planning/optimization. Simulation software, such as PASSATA, have been successfully utilized for PSF characterization in instrument design, which make use of standardized atmospheric turbulence profiles to produce PSFs that represent the typical instrument performance. In thi…
▽ More
Characterizing the PSF of adaptive optics instruments is of paramount importance both for instrument design and observation planning/optimization. Simulation software, such as PASSATA, have been successfully utilized for PSF characterization in instrument design, which make use of standardized atmospheric turbulence profiles to produce PSFs that represent the typical instrument performance. In this contribution we study the feasibility of using such tool for nowcast application (present-time forecast), such as the characterization of an on-sky measured PSF in real observations. Specifically we will analyze the performance of the simulation software in characterizing the real-time PSF of two different state-of-the-art SCAO adaptive optics instruments: SOUL at the LBT, and SAXO at the VLT. The study will make use of on-sky measurements of the atmospheric turbulence and compare the results of the simulations to the measured PSF figures of merit (namely the FHWM and the Strehl Ratio) retrieved from the instrument telemetry in real observations. Our main goal in this phase is to quantify the level of uncertainly of the AO simulations in reproducing real on-sky observed PSFs with an end-to-end code (PASSATA). In a successive phase we intend to use a faster analytical code (TIPTOP). This work is part of a wider study which aims to use simulation tools joint to atmospheric turbulence forecasts performed nightly to forecast in advance the PSF and support science operations of ground-based telescopes facilities. The 'PSF forecast' option might therefore be added to ALTA Center or the operational forecast system that will be implemented soon at ESO.
△ Less
Submitted 20 October, 2022;
originally announced October 2022.
-
Three-sided pyramid wavefront sensor. II. Preliminary demonstration on the new CACTI testbed
Authors:
Lauren Schatz,
Johanan Codona,
Joseph D. Long,
Jared R. Males,
Weslin Pullen,
Jennifer Lumbres,
Kyle Van Gorkom,
Vincent Chambouleyron,
Laird M. Close,
Carlos Correia,
Olivier Fauvarque,
Thierry Fusco,
Olivier Guyon,
Michael Hart,
Pierre Janin-Potiron,
Robert Johnson,
Nemanja Jovanovic,
Mala Mateen,
Jean-Francois Sauvage,
Benoit Neichel
Abstract:
The next generation of giant ground and space telescopes will have the light-collecting power to detect and characterize potentially habitable terrestrial exoplanets using high-contrast imaging for the first time. This will only be achievable if the performance of Giant Segmented Mirror Telescopes (GSMTs) extreme adaptive optics (ExAO) systems are optimized to their full potential. A key component…
▽ More
The next generation of giant ground and space telescopes will have the light-collecting power to detect and characterize potentially habitable terrestrial exoplanets using high-contrast imaging for the first time. This will only be achievable if the performance of Giant Segmented Mirror Telescopes (GSMTs) extreme adaptive optics (ExAO) systems are optimized to their full potential. A key component of an ExAO system is the wavefront sensor (WFS), which measures aberrations from atmospheric turbulence. A common choice in current and next-generation instruments is the pyramid wavefront sensor (PWFS). ExAO systems require high spatial and temporal sampling of wavefronts to optimize performance, and as a result, require large detectors for the WFS. We present a closed-loop testbed demonstration of a three-sided pyramid wavefront sensor (3PWFS) as an alternative to the conventional four-sided pyramid wavefront (4PWFS) sensor for GSMT-ExAO applications on the new Comprehensive Adaptive Optics and Coronagraph Test Instrument (CACTI). The 3PWFS is less sensitive to read noise than the 4PWFS because it uses fewer detector pixels. The 3PWFS has further benefits: a high-quality three-sided pyramid optic is easier to manufacture than a four-sided pyramid. We detail the design of the two components of the CACTI system, the adaptive optics simulator and the PWFS testbed that includes both a 3PWFS and 4PWFS. A preliminary experiment was performed on CACTI to study the performance of the 3PWFS to the 4PWFS in varying strengths of turbulence using both the Raw Intensity and Slopes Map signal processing methods. This experiment was repeated for a modulation radius of 1.6 lambda/D and 3.25 lambda/D. We found that the performance of the two wavefront sensors is comparable if modal loop gains are tuned.
△ Less
Submitted 7 October, 2022;
originally announced October 2022.
-
Adapting the pyramid wavefront sensor for pupil fragmentation of the ELT class telescopes
Authors:
Nicolas Levraud,
Vincent Chambouleyron,
Olivier Fauvarque,
Mahawa Cissé,
Jean-François Sauvage,
Benoît Neichel,
Charlotte Bond,
Enrico Pinna,
Simone Esposito,
Noah Schwartz,
Thierry Fusco
Abstract:
The next generation of Extremely Large Telescope (24 to 39m diameter) will suffer from the so-called "pupil fragmentation" problem. Due to their pupil shape complexity (segmentation, large spiders ...), some differential pistons may appear between some isolated part of the full pupil during the observations. Although classical AO system will be able to correct for turbulence effects, they will be…
▽ More
The next generation of Extremely Large Telescope (24 to 39m diameter) will suffer from the so-called "pupil fragmentation" problem. Due to their pupil shape complexity (segmentation, large spiders ...), some differential pistons may appear between some isolated part of the full pupil during the observations. Although classical AO system will be able to correct for turbulence effects, they will be blind to this specific telescope induced perturbations. Hence, such differential piston, a.k.a petal modes, will prevent to reach the diffraction limit of the telescope and ultimately will represent the main limitation of AO-assisted observation with an ELT. In this work we analyse the spatial structure of these petal modes and how it affects the ability of a Pyramid Wavefront sensor to sense them. Then we propose a variation around the classical Pyramid concept for increasing the WFS sensitivity to this particular modes. Nevertheless, We show that one single WFS can not accurately and simultaneously measure turbulence and petal modes. We propose a double path wavefront sensor scheme to solve this problem. We show that such a scheme,associated to a spatial filtering of residual turbulence in the second WFS path dedicated to petal mode sensing, allows to fully measure and correct for both turbulence and fragmentation effects and will eventually restore the full capability and spatial resolution of the future ELT.
△ Less
Submitted 19 September, 2022;
originally announced September 2022.
-
Performance characterization and near-realtime monitoring of MUSE adaptive optics modes at Paranal
Authors:
T. Wevers,
F. J. Selman,
A. Reyes,
M. Vega,
J. Hartke,
F. Bian,
O. Beltramo-Martin,
R. Fétick,
S. Kamann,
J. Kolb,
T. Kravtsov,
C. Moya,
B. Neichel,
S. Oberti,
C. Reyes,
E. Valenti
Abstract:
The Multi Unit Spectroscopic Explorer (MUSE) is an integral field spectrograph on the Very Large Telescope Unit Telescope 4, capable of laser guide star assisted and tomographic adaptive optics using the GALACSI module. Its observing capabilities include a wide field (1 square arcmin), ground layer AO mode (WFM-AO) and a narrow field (7.5"x7.5"), laser tomography AO mode (NFM-AO). The latter has h…
▽ More
The Multi Unit Spectroscopic Explorer (MUSE) is an integral field spectrograph on the Very Large Telescope Unit Telescope 4, capable of laser guide star assisted and tomographic adaptive optics using the GALACSI module. Its observing capabilities include a wide field (1 square arcmin), ground layer AO mode (WFM-AO) and a narrow field (7.5"x7.5"), laser tomography AO mode (NFM-AO). The latter has had several upgrades in the 4 years since commissioning, including an optimisation of the control matrices for the AO system and a new sub-electron noise detector for its infra-red low order wavefront sensor. We set out to quantify the NFM-AO system performance by analysing $\sim$230 spectrophotometric standard star observations taken over the last 3 years. To this end we expand upon previous work, designed to facilitate analysis of the WFM-AO system performance. We briefly describe the framework that will provide a user friendly, semi-automated way for system performance monitoring during science operations. We provide the results of our performance analysis, chiefly through the measured Strehl ratio and full width at half maximum (FWHM) of the core of the point spread function (PSF) using two PSF models, and correlations with atmospheric conditions. These results will feed into a range of applications, including providing a more accurate prediction of the system performance as implemented in the exposure time calculator, and the associated optimization of the scientific output for a given set of limiting atmospheric conditions.
△ Less
Submitted 15 September, 2022;
originally announced September 2022.
-
Super-resolution wavefront reconstruction
Authors:
Sylvain Oberti,
Carlos Correia,
Thierry Fusco,
Benoit Neichel,
Pierre Guiraud
Abstract:
Super-Resolution (SR) is a technique that seeks to upscale the resolution of a set of measured signals. SR retrieves higher-frequency signal content by combining multiple lower resolution sampled data sets. SR is well known both in the temporal and spatial domains. It is widely used in imaging to reduce aliasing and enhance the resolution of coarsely sampled images.This paper applies the SR techni…
▽ More
Super-Resolution (SR) is a technique that seeks to upscale the resolution of a set of measured signals. SR retrieves higher-frequency signal content by combining multiple lower resolution sampled data sets. SR is well known both in the temporal and spatial domains. It is widely used in imaging to reduce aliasing and enhance the resolution of coarsely sampled images.This paper applies the SR technique to the bi-dimensional wavefront reconstruction. In particular, we show how SR is intrinsically suited for tomographic multi WaveFront Sensor (WFS) AO systems revealing many of its advantages with minimal design effort. This paper provides a direct space and Fourier-optics description of the wavefront sensing operation and demonstrate how SR can be exploited through signal reconstruction, especially in the framework of Periodic Nonuniform Sampling. Both meta uniform and nonuniform sampling schemes are investigated. Then, the SR bi-dimensional model for a Shack Hartmann (SH) WFS is provided and the characteristics of the sensitivity function are analyzed. The SR concept is finally validated with numerical simulations of representative multi WFS SH AO systems. Our results show that combining several WFS samples in a SR framework grants access to a larger number of modes than the native one offered by a single WFS and that despite the fixed sub-aperture size across samples. Furthermore, we show that the associated noise propagation is not degraded under SR. Finally, the concept is extended to the signal produced by single Pyramid WFS. In conclusion, SR applied to wavefront reconstruction offers a new parameter space to explore as it decouples the size of the subaperture from the desired wavefront sampling resolution. By cutting short with old assumptions, new, more flexible and better performing AO designs become now possible.
△ Less
Submitted 25 August, 2022;
originally announced August 2022.
-
Towards virtual access of adaptive optics telemetry data
Authors:
Tiago Gomes,
Carlos Correia,
Lisa Bardou,
Olivier Beltramo-Martin,
Thierry Fusco,
Caroline Kulcsár,
Timothy Morris,
Nuno Morujão,
Benoît Neichel,
James Osborn,
Paulo Garcia
Abstract:
Large amounts of Adaptive-Optics (AO) control loop data and telemetry are currently inaccessible to end-users. Broadening access to those data has the potential to change the AO landscape on many fronts, addressing several use-cases such as derivation of the system's PSF, turbulence characterisation and optimisation of system control. We address one of the biggest obstacles to sharing these data:…
▽ More
Large amounts of Adaptive-Optics (AO) control loop data and telemetry are currently inaccessible to end-users. Broadening access to those data has the potential to change the AO landscape on many fronts, addressing several use-cases such as derivation of the system's PSF, turbulence characterisation and optimisation of system control. We address one of the biggest obstacles to sharing these data: the lack of standardisation, which hinders access. We propose an object-oriented Python package for AO telemetry, whose data model abstracts the user from an underlining archive-ready data exchange standard based on the Flexible Image Transport System (FITS). Its design supports data from a wide range of existing and future AO systems, either in raw format or abstracted from actual instrument details. We exemplify its usage with data from active AO systems on 10m-class observatories, of which two are currently supported (AOF and Keck), with plans for more.
△ Less
Submitted 28 July, 2022;
originally announced July 2022.
-
HARMONI at ELT: designing a laser guide star wavefront sensors for the ELT
Authors:
Anne Costille,
Anne Bonnefoi,
Edgard Renault,
William Ceria,
Kjetil Dohlen,
Benoit Neichel,
Zoltan Hubert,
Jean-Jacques Correia,
Thibaut Moulin,
Saul Menendez Mendoza,
Thierry Fusco,
Pascal Vola,
Felipe Pedreros,
Pierre Jouve,
El Kacem,
Fraser Hadi,
Hermine Schnetler,
Dave Melotte,
Niranjan Thatte
Abstract:
HARMONI is the first light visible and near-IR integral field spectrograph for the ELT covering a large spectral range from 450nm to 2450nm with resolving powers from 3500 to 18000 and spatial sampling from 60mas to 4mas. It can operate in two Adaptive Optics modes-SCAO and LTAO-or with no AO. The project is preparing for Final Design Reviews. The laser Tomographic AO (LTAO) system provides AO cor…
▽ More
HARMONI is the first light visible and near-IR integral field spectrograph for the ELT covering a large spectral range from 450nm to 2450nm with resolving powers from 3500 to 18000 and spatial sampling from 60mas to 4mas. It can operate in two Adaptive Optics modes-SCAO and LTAO-or with no AO. The project is preparing for Final Design Reviews. The laser Tomographic AO (LTAO) system provides AO correction with very high sky-coverage thanks to two systems: the Laser Guide Star Sensors (LGSS) and the Natural Guide Star Sensors (NGSS). LGSS is dedicated to the analysis of the wavefront coming from 6 laser guide stars created by the ELT. It is made of 6 independent wavefront sensor (WFS) modules mounted on a rotator of 600mm diameter to stabilise the pupil onto the microlens array in front of the detector. The optical design accepts elongated spots of up to 16 arcsec with no truncation using a CMOS detector from SONY. We will present the final optical and mechanical design of the LGSS based on freeform lenses to minimize the numbers of optical components and to accommodate for the diversity of sodium layer configurations. We will focus on rotator design, illustrating how we will move 1 tons with 90" accuracy in restrictive environment. Finally, we will present the strategy to verify the system in HARMONI context. The main challenge for the verification being how to test an AO system without access to the deformable mirror, part of the ELT.
△ Less
Submitted 18 July, 2022;
originally announced July 2022.
-
Key wavefront sensors features for laser-assisted tomographic adaptive optics systems on the Extremely Large Telescope
Authors:
Thierry Fusco,
Guido Agapito,
Benoit Neichel,
Sylvain Oberti,
Carlos Correia,
Pierre Haguenauer,
Cédric Plantet,
Felipe Pedreros,
Zibo Ke,
Anne Costille,
Pierre Jouve,
Lorenzo Busoni,
Simone Esposito
Abstract:
Laser guide star (LGS) wave-front sensing (LGSWFS) is a key element of tomographic adaptive optics system. However, when considering Extremely Large Telescope (ELT) scales, the LGS spot elongation becomes so large that it challenges the standard recipes to design LGSWFS. For classical Shack-Hartmann wave-front sensor (SHWFS), which is the current baseline for all ELT LGS-assisted instruments, a tr…
▽ More
Laser guide star (LGS) wave-front sensing (LGSWFS) is a key element of tomographic adaptive optics system. However, when considering Extremely Large Telescope (ELT) scales, the LGS spot elongation becomes so large that it challenges the standard recipes to design LGSWFS. For classical Shack-Hartmann wave-front sensor (SHWFS), which is the current baseline for all ELT LGS-assisted instruments, a trade-off between the pupil spatial sampling [number of sub-apertures (SAs)], the SA field-of-view (FoV) and the pixel sampling within each SA is required. For ELT scales, this trade-off is also driven by strong technical constraints, especially concerning the available detectors and in particular their number of pixels. For SHWFS, a larger field of view per SA allows mitigating the LGS spot truncation, which represents a severe loss of performance due to measurement biases. For a given number of available detectors pixels, the SA FoV is competing with the proper sampling of the LGS spots, and/or the total number of SAs. We proposed a sensitivity analysis, and we explore how these parameters impacts the final performance. In particular, we introduce the concept of super resolution, which allows one to reduce the pupil sampling per WFS and opens an opportunity to propose potential LGSWFS designs providing the best performance for ELT scales.
△ Less
Submitted 22 June, 2022;
originally announced June 2022.
-
Infrared tip-tilt sensing: on-sky experience, lessons learned and unsolved problems
Authors:
Marcos A. van Dam,
Sylvain Oberti,
Johann Kolb,
Jim Lyke,
Sylvain Cetre,
Benoit Neichel
Abstract:
Infrared tip-tilt sensors (IR TTSs) have been deployed on three different laser guide star adaptive optics (AO) systems on three different telescopes. These IR TTS benefit from the high-order loop PSF sharpening in the near infrared, hence they provide a low tip-tilt residual and a good sky coverage. Nevertheless, these IR TTS are challenging and their use in AO is limited. In this paper, we outli…
▽ More
Infrared tip-tilt sensors (IR TTSs) have been deployed on three different laser guide star adaptive optics (AO) systems on three different telescopes. These IR TTS benefit from the high-order loop PSF sharpening in the near infrared, hence they provide a low tip-tilt residual and a good sky coverage. Nevertheless, these IR TTS are challenging and their use in AO is limited. In this paper, we outline existing IR TTS, provide on-sky performance results and describe our experience using IR TTS and along with plans for the near future. The second part of the paper deals with unresolved challenges for IR TTS. These include algorithms and loop stability in the low Strehl regime, using IR TTSs to measure higher-order modes and guiding on multiple guide stars with different magnitudes.
△ Less
Submitted 14 January, 2022;
originally announced January 2022.
-
The Three-Sided PyramidWavefront Sensor. I. Simulations and Analysis for Astronomical Adaptive Optics
Authors:
Lauren Schatz,
Jared R. Males,
Carlos Correia,
Benoit Neichel,
Vincent Chambouleyron,
Johanan Codona,
Olivier Fauvarque,
Jean-François Sauvage,
Thierry Fusco,
Michael Hart,
Pierre Janin-Potiron,
Robert Johnson,
Joseph Long,
Mala Mateen
Abstract:
For ExAO instruments for the Giant Segmented Mirror Telescopes (GSMTs), alternative architectures of WFS are under consideration because there is a tradeoff between detector size, speed, and noise that reduces the performance of GSMT-ExAO wavefront control. One option under consideration for a GSMT-ExAO wavefront sensor is a three-sided PWFS (3PWFS). The 3PWFS creates three copies of the telescope…
▽ More
For ExAO instruments for the Giant Segmented Mirror Telescopes (GSMTs), alternative architectures of WFS are under consideration because there is a tradeoff between detector size, speed, and noise that reduces the performance of GSMT-ExAO wavefront control. One option under consideration for a GSMT-ExAO wavefront sensor is a three-sided PWFS (3PWFS). The 3PWFS creates three copies of the telescope pupil for wavefront sensing, compared to the conventional four-sided PWFS (4PWFS) which uses four pupils. The 3PWFS uses fewer detector pixels than the 4PWFS and should therefore be less sensitive to read noise. Here we develop a mathematical formalism based on the diffraction theory description of the Foucault knife edge test that predicts the intensity pattern after the PWFS. Our formalism allows us to calculate the intensity in the pupil images formed by the PWFS in the presence of phase errors corresponding to arbitrary Fourier modes. We then use the Object Oriented MATLAB Adaptive Optics toolbox (OOMAO) to simulate an end-to-end model of an adaptive optics system using a PWFS with modulation and compare the performance of the 3PWFS to the 4PWFS. In the case of a low read noise detector, the Strehl ratios of the 3PWFS and 4PWFS are within 0.01. When we included higher read noise in the simulation, we found a Strehl ratio gain of 0.036 for the 3PWFS using Raw Intensity over the 4PWFS using Slopes Maps at a stellar magnitude of 10. At the same magnitude, the 4PWFS RI also outperformed the 4PWFS SM, but the gain was only 0.012 Strehl. This is significant because 4PWFS using Slopes Maps is how the PWFS is conventionally used for AO wavefront sensing. We have found that the 3PWFS is a viable wavefront sensor that can fully reconstruct a wavefront and produce a stable closed-loop with correction comparable to that of a 4PWFS, with modestly better performance for high read-noise detectors.
△ Less
Submitted 13 September, 2021;
originally announced September 2021.
-
Variation on a Zernike wavefront sensor theme: optimal use of photons
Authors:
Vincent Chambouleyron,
Olivier Fauvarque,
Jean-François Sauvage,
Kjetil Dohlen,
Nicolas Levraud,
Arthur Vigan,
Mamadou N'Diaye,
Benoît Neichel,
Thierry Fusco
Abstract:
The Zernike wavefront sensor (ZWFS) is a concept belonging to the wide class Fourier-filtering wavefront sensor (FFWFS). The ZWFS is known for its extremely high sensitivity while having a low dynamic range, which makes it a unique sensor for second stage adaptive optics (AO) systems or quasi-static aberrations calibration sensor. This sensor is composed of a focal plane mask made of a phase shift…
▽ More
The Zernike wavefront sensor (ZWFS) is a concept belonging to the wide class Fourier-filtering wavefront sensor (FFWFS). The ZWFS is known for its extremely high sensitivity while having a low dynamic range, which makes it a unique sensor for second stage adaptive optics (AO) systems or quasi-static aberrations calibration sensor. This sensor is composed of a focal plane mask made of a phase shifting dot fully described by two parameters: its diameter and depth. In this letter, we aim to improve the performance of this sensor by changing the diameter of its phase shifting dot. We begin with a general theoretical framework providing an analytical description of the FFWFS properties, then we predict the expected ZWFS sensitivity for different configurations of dot diameters and depths. The analytical predictions are then validated with end-to-end simulations. From this, we propose a variation of the classical ZWFS shape which exhibits extremely appealing properties. We show that the ZWFS sensitivity can be optimized by modifying the dot diameter and even reach the optimal theoretical limit, with a trade-off for low spatial frequencies sensitivity. As an example, we show that a ZWFS with a 2λ/D dot diameter (where λ is the sensing wavelength and D the telescope diameter), hereafter called Z2WFS, exhibits a sensitivity twice higher than the classical 1.06λ/D ZWFS for all the phase spatial components except for tip-tilt modes. Furthermore, this gain in sensitivity does not impact the dynamic range of the sensor, and the Z2WFS exhibits a similar dynamical range as the classical 1.06λ/D ZWFS. This study opens the path to the conception of diameter-optimized ZWFS.
△ Less
Submitted 17 May, 2021;
originally announced May 2021.
-
SPRINT: System Parameters Recurrent INvasive Tracking, a fast and least-cost online calibration strategy for adaptive optics
Authors:
C. T. Heritier,
T. Fusco,
S. Oberti,
B. Neichel,
S. Esposito,
P. -Y. Madec
Abstract:
The future large adaptive telescopes will trigger new constraints for the calibration of Adaptive Optics (AO) systems equipped with pre-focal Deformable Mirrors (DM). The image of the DM actuators grid as seen by the Wave-Front Sensor (WFS) may evolve during the operations due to the flexures of the opto-mechanical components present in the optical path. The latter will result in degraded AO perfo…
▽ More
The future large adaptive telescopes will trigger new constraints for the calibration of Adaptive Optics (AO) systems equipped with pre-focal Deformable Mirrors (DM). The image of the DM actuators grid as seen by the Wave-Front Sensor (WFS) may evolve during the operations due to the flexures of the opto-mechanical components present in the optical path. The latter will result in degraded AO performance that will impact the scientific operation. To overcome this challenge, it will be necessary to regularly monitor and compensate for these DM/WFS mis-registrations either by physically re-aligning some optical components or by updating the control matrix of the system. In this paper, we present a new strategy to track mis-registrations using a pseudo-synthetic model of the AO system. The method is based on an invasive approach where signals are acquired on-sky, before or during the scientific operations, and fed to the model to extract the mis-registration parameters. We introduce a method to compute the most sensitive modes to these mis-registrations that allows to reduce the number of degrees of freedom required by the algorithm and minimize the impact on the scientific performance. We demonstrate that, using only a few of these well selected signals, the method provides a very good accuracy on the parameters estimation, well under the targeted accuracy, and has a negligible impact on the scientific path. In addition, the method appears to be very robust to varying operating conditions of noise and atmospheric turbulence and performs equally for both Pyramid and Shack-Hartmann WFS.
△ Less
Submitted 22 April, 2021;
originally announced April 2021.
-
HARMONI: the ELT's First-Light Near-infrared and Visible Integral Field Spectrograph
Authors:
Niranjan Thatte,
Matthias Tecza,
Hermine Schnetler,
Benoît Neichel,
Dave Melotte,
Thierry Fusco,
Vanessa Ferraro-Wood,
Fraser Clarke,
Ian Bryson,
Kieran O'Brien,
Mario Mateo,
Begoña Garcia Lorenzo,
Chris Evans,
Nicolas Bouché,
Santiago Arribas,
the HARMONI Consortium
Abstract:
The High Angular Resolution Monolithic Optical and Near-infrared Integral field spectrograph (HARMONI) is the visible and near-infrared (NIR), adaptive-optics-assisted, integral field spectrograph for ESO's Extremely Large Telescope (ELT). It will have both a single-conjugate adaptive optics (SCAO) mode (using a single bright natural guide star) and a laser tomographic adaptive optics (LTAO) mode…
▽ More
The High Angular Resolution Monolithic Optical and Near-infrared Integral field spectrograph (HARMONI) is the visible and near-infrared (NIR), adaptive-optics-assisted, integral field spectrograph for ESO's Extremely Large Telescope (ELT). It will have both a single-conjugate adaptive optics (SCAO) mode (using a single bright natural guide star) and a laser tomographic adaptive optics (LTAO) mode (using multiple laser guide stars), providing near diffraction-limited hyper-spectral imaging with high performance and good sky coverage, respectively. A unique high-contrast adaptive optics (HCAO) capability has recently been added for exoplanet characterisation. A large detector complement of eight HAWAII-4RG arrays, four choices of spaxel scale, and 11 grating choices with resolving powers ranging from R~3000 to R~17000 make HARMONI a very versatile instrument that can cater to a wide range of observing programmes.
△ Less
Submitted 20 March, 2021;
originally announced March 2021.
-
The focal-plane assisted pyramid wavefront sensor: enabling frame-by-frame optical gains tracking
Authors:
Vincent Chambouleyron,
Olivier Fauvarque,
Jean-François Sauvage,
Benoît Neichel,
Thierry Fusco
Abstract:
With its high sensitivity, the Pyramid wavefront sensor (PyWFS) is becoming an advantageous sensor for astronomical adaptive optics (AO) systems. However, this sensor exhibits significant non-linear behaviours leading to challenging AO control issues. In order to mitigate these effects, we propose to use, in addition to the classical pyramid sensor, a focal plane image combined with a convolutive…
▽ More
With its high sensitivity, the Pyramid wavefront sensor (PyWFS) is becoming an advantageous sensor for astronomical adaptive optics (AO) systems. However, this sensor exhibits significant non-linear behaviours leading to challenging AO control issues. In order to mitigate these effects, we propose to use, in addition to the classical pyramid sensor, a focal plane image combined with a convolutive description of the sensor to perform a fast tracking of the PyWFS non-linearities, the so-called optical gains (OG). We show that this additional focal plane imaging path only requires a small fraction of the total flux, while representing a robust solution to estimate the PyWFS OG. Finally, we demonstrate the gain brought by our method with the specific examples of bootstrap and Non-Common Path Aberrations (NCPA) handling.
△ Less
Submitted 3 March, 2021;
originally announced March 2021.
-
INGOT Wavefront Sensor: from the optical design to a preliminary laboratory test
Authors:
Simone Di Filippo,
Davide Greggio,
Maria Bergomi,
Kalyan Radhakrishnan,
Elisa Portaluri,
Valentina Viotto,
Carmelo Arcidiacono,
Demetrio Magrin,
Luca Marafatto,
Marco Dima,
Roberto Ragazzoni,
Pierre Janin-Potiron,
Lauren Schatz,
Benoit Neichel,
Olivier Fauvarque,
Thierry Fusco
Abstract:
The Ingot wavefront sensor is a novel pupil-plane wavefront sensor, specifically designed to cope with the elongation typical of the extended nature of the Laser Guide Star (LGS). In the framework of the ELT, we propose an optical solution suitable for a Laser launch telescope, located outside the telescope pupil. In this paper, we present the current optical design, based on a reflective roof-sha…
▽ More
The Ingot wavefront sensor is a novel pupil-plane wavefront sensor, specifically designed to cope with the elongation typical of the extended nature of the Laser Guide Star (LGS). In the framework of the ELT, we propose an optical solution suitable for a Laser launch telescope, located outside the telescope pupil. In this paper, we present the current optical design, based on a reflective roof-shaped prism, which, at the level of the focal plane, splits the light from an LGS producing three beams. The three images of the telescope pupils can be then used for the retrieval of the first derivative of the wavefront. The 3D nature of such a device requires new alignment techniques to be determined theoretically and verified in the real world. A possible fully automated procedure, relying solely on the illumination observed at the three pupils, to align the prism to the image of the LGS is discussed. Careful attention needs to be put both on the telecentricity of the system and on the reference systems of the Ingot adjustments in the 3D space. This is crucial in order to disentangle all the possible misalignment effects. In this context, we devised a test-bench able to reproduce, in a scaled manner, the 3D illumination that the Ingot will face at the ELT, in order to validate the design and to perform preliminary tests of phase retrieval.
△ Less
Submitted 19 January, 2021;
originally announced January 2021.
-
TIPTOP: a new tool to efficiently predict your favorite AO PSF
Authors:
Benoit Neichel,
Olivier Beltramo-Martin,
Cedric Plantet,
Fabio Rossi,
Guido Agapito,
Thierry Fusco,
Elena Carolo,
Giulia Carla,
Michele Cirasuolo,
Remco van der Burg
Abstract:
The Adaptive Optics (AO) performance significantly depends on the available Natural Guide Stars (NGSs) and a wide range of atmospheric conditions (seeing, Cn2, windspeed,...). In order to be able to easily predict the AO performance, we have developed a fast algorithm - called TIPTOP - producing the expected AO Point Spread Function (PSF) for any of the existing AO observing modes (SCAO, LTAO, MCA…
▽ More
The Adaptive Optics (AO) performance significantly depends on the available Natural Guide Stars (NGSs) and a wide range of atmospheric conditions (seeing, Cn2, windspeed,...). In order to be able to easily predict the AO performance, we have developed a fast algorithm - called TIPTOP - producing the expected AO Point Spread Function (PSF) for any of the existing AO observing modes (SCAO, LTAO, MCAO, GLAO), and any atmospheric conditions. This TIPTOP tool takes its roots in an analytical approach, where the simulations are done in the Fourier domain. This allows to reach a very fast computation time (few seconds per PSF), and efficiently explore the wide parameter space. TIPTOP has been developed in Python, taking advantage of previous work developed in different languages, and unifying them in a single framework. The TIPTOP app is available on GitHub at: https://github.com/FabioRossiArcetri/TIPTOP, and will serve as one of the bricks for the ELT Exposure Time Calculator.
△ Less
Submitted 16 January, 2021;
originally announced January 2021.
-
MAVIS: system modelling and performance prediction
Authors:
Guido Agapito,
Daniele Vassallo,
Cedric Plantet,
Valentina Viotto,
Enrico Pinna,
Benoit Neichel,
Thierry Fusco,
Francois Rigaut
Abstract:
The MCAO Assisted Visible Imager and Spectrograph (MAVIS) Adaptive Optics Module has very demanding goals to support science in the optical: providing 15% SR in V band on a large FoV of 30arcsec diameter in standard atmospheric conditions at Paranal. It will be able to work in closed loop on up to three natural guide stars down to H=19, providing a sky coverage larger than 50% in the south galacti…
▽ More
The MCAO Assisted Visible Imager and Spectrograph (MAVIS) Adaptive Optics Module has very demanding goals to support science in the optical: providing 15% SR in V band on a large FoV of 30arcsec diameter in standard atmospheric conditions at Paranal. It will be able to work in closed loop on up to three natural guide stars down to H=19, providing a sky coverage larger than 50% in the south galactic pole. Such goals and the exploration of a large MCAO system parameters space have required a combination of analytical and end- to-end simulations to assess performance, sky coverage and drive the design. In this work we report baseline performance, statistical sky coverage and parameters sensitivity analysis done in the phase-A instrument study.
△ Less
Submitted 28 December, 2020;
originally announced December 2020.
-
Operational forecast of the PSF figures of merit
Authors:
A. Turchi,
G. Agapito,
E. Masciadri,
O. Beltramo-Martin,
E. Pinna,
J. F. Sauvage,
T. Fusco,
B. Neichel,
J. Milli
Abstract:
The optimization and scheduling of scientific observations done with instrumentation supported by adaptive optics could greatly benefit from the forecast of PSF figures of merit (FWHM, Strehl Ratio, Encircle Energy and contrast), that depend on the AO instrument, the scientific target and turbulence conditions during the observing night. In this contribution we explore the the possibility to forec…
▽ More
The optimization and scheduling of scientific observations done with instrumentation supported by adaptive optics could greatly benefit from the forecast of PSF figures of merit (FWHM, Strehl Ratio, Encircle Energy and contrast), that depend on the AO instrument, the scientific target and turbulence conditions during the observing night. In this contribution we explore the the possibility to forecast a few among the most useful PSF figures of merit (SR and FWHM). To achieve this goal, we use the optical turbulence forecasted by the mesoscale atmospheric model Astro-Meso-NH on a short timescale as an input for PSF simulation software developed and tailored for specific AO instruments. A preliminary validation will be performed by comparing the results with on-sky measured PSF figures of merit obtained on specific targets using the SCAO systems SOUL (FLAO upgrade) feeding the camera LUCI at LBT and SAXO, the extreme SCAO system feeding the high resolution SPHERE instrument at VLT. This study will pave the way to the implementation of an operational forecasts of such a figure of merits on the base of existing operational forecast system of the atmosphere (turbulence and atmospheric parameters). In this contribution we focus our attention on the forecast of the PSF on-axis.
△ Less
Submitted 14 December, 2020;
originally announced December 2020.
-
Joint estimation of atmospheric and instrumental defects using a parsimonious point spread function model.On-sky validation using state of the art worldwide adaptive-optics assisted instruments
Authors:
Olivier Beltramo-Martin,
Romain Fétick,
Benoit Neichel,
Thierry Fusco
Abstract:
Modeling the optical point spread function (PSF) is particularly challenging for adaptive optics (AO)-assisted observations owing to the its complex shape and spatial variations. We aim to (i) exhaustively demonstrate the accuracy of a recent analytical model from comparison with a large sample of imaged PSFs, (ii) assess the conditions for which the model is optimal, and (iii) unleash the strengt…
▽ More
Modeling the optical point spread function (PSF) is particularly challenging for adaptive optics (AO)-assisted observations owing to the its complex shape and spatial variations. We aim to (i) exhaustively demonstrate the accuracy of a recent analytical model from comparison with a large sample of imaged PSFs, (ii) assess the conditions for which the model is optimal, and (iii) unleash the strength of this framework to enable the joint estimation of atmospheric parameters, AO performance and static aberrations. We gathered 4812 on-sky PSFs obtained from seven AO systems and used the same fitting algorithm to test the model on various AO PSFs and diagnose AO performance from the model outputs. Finally, we highlight how this framework enables the characterization of the so-called low wind effect on the SPHERE instrument and piston cophasing errors on the Keck II telescope. Over 4812 PSFs, the model reaches down to 4% of error on both the Strehl-ratio (SR) and full width at half maximum (FWHM). We particularly illustrate that the estimation of the Fried parameter, which is one of the model parameters, is consistent with known seeing statistics and follows expected trends in wavelength using the MUSE instrument ($λ^{6/5}$) and field (no variations) from GSAOI images with a standard deviation of 0.4cm. Finally, we show that we can retrieve a combination of differential piston, tip, and tilt modes introduced by the LWE that compares to ZELDA measurements, as well as segment piston errors from the Keck II telescope and particularly the stair mode that has already been revealed from previous studies. This model matches all types of AO PSFs at the level of 4% error and can be used for AO diagnosis, post-processing, and wavefront sensing purposes.
△ Less
Submitted 2 September, 2020;
originally announced September 2020.
-
Blind deconvolution in astronomy with adaptive optics: the parametric marginal approach
Authors:
Romain Fétick,
Laurent Mugnier,
Thierry Fusco,
Benoit Neichel
Abstract:
One of the major limitations of adaptive optics (AO) corrected image post-processing is the lack of knowledge on the system point spread function (PSF). The PSF is not always available as a direct imaging on isolated point like objects such as stars. Its prediction using AO telemetry also suffers from serious limitations and requires complex and yet not fully operational algorithms. A very attract…
▽ More
One of the major limitations of adaptive optics (AO) corrected image post-processing is the lack of knowledge on the system point spread function (PSF). The PSF is not always available as a direct imaging on isolated point like objects such as stars. Its prediction using AO telemetry also suffers from serious limitations and requires complex and yet not fully operational algorithms. A very attractive solution consists in a direct PSF estimation using the scientific images themselves thanks to blind or myopic post-processing approaches. We demonstrate that such approaches suffer from severe limitations when a joint restitution of object and PSF parameters is performed. As an alternative we propose here a marginalized PSF identification that overcomes this limitation. Then the PSF is used for image post-processing. Here we focus on deconvolution, a post-processing technique to restore the object, given the image and the PSF. We show that the PSF estimated by marginalisation provides good quality deconvolution. The full process of marginalized PSF estimation and deconvolution constitutes a successful blind deconvolution technique. It is tested on simulated data to measure its performance. It is also tested on experimental adaptive optics images of the asteroid 4-Vesta by VLT/SPHERE/Zimpol to demonstrate application to on-sky data.
△ Less
Submitted 19 June, 2020;
originally announced June 2020.
-
Pyramid wavefront sensor optical gains compensation using a convolutional model
Authors:
Vincent Chambouleyron,
Olivier Fauvarque,
Pierre Janin-Potiron,
Carlos Correia,
Jean-François Sauvage,
Noah Schwartz,
Benoît Neichel,
Thierry Fusco
Abstract:
Extremely Large Telescopes have overwhelmingly opted for the Pyramid wavefront sensor (PyWFS) over the more widely used Shack-Hartmann WaveFront Sensor (SHWFS) to perform their Single Conjugate Adaptive Optics (SCAO) mode. The PyWFS, a sensor based on Fourier filtering, has proven to be highly successful in many astronomy applications. However, it exhibits non-linearity behaviors that lead to a re…
▽ More
Extremely Large Telescopes have overwhelmingly opted for the Pyramid wavefront sensor (PyWFS) over the more widely used Shack-Hartmann WaveFront Sensor (SHWFS) to perform their Single Conjugate Adaptive Optics (SCAO) mode. The PyWFS, a sensor based on Fourier filtering, has proven to be highly successful in many astronomy applications. However, it exhibits non-linearity behaviors that lead to a reduction of its sensitivity when working with non-zero residual wavefronts. This so-called Optical Gains (OG) effect, degrades the close loop performance of SCAO systems and prevents accurate correction of Non-Common Path Aberrations (NCPA). In this paper, we aim at computing the OG using a fast and agile strategy in order to control the PyWFS measurements in adaptive optics closed loop systems. Using a novel theoretical description of the PyFWS, which is based on a convolutional model, we are able to analytically predict the behavior of the PyWFS in closed-loop operation. This model enables us to explore the impact of residual wavefront error on particular aspects such as sensitivity and associated OG. The proposed method relies on the knowledge of the residual wavefront statistics and enables automatic estimation of the current OG. End-to-End numerical simulations are used to validate our predictions and test the relevance of our approach. We demonstrate, using on non-invasive strategy, that our method provides an accurate estimation of the OG. The model itself only requires AO telemetry data to derive statistical information on atmospheric turbulence. Furthermore, we show that by only using an estimation of the current Fried parameter r_0 and the basic system-level characteristics, OGs can be estimated with an accuracy of less than 10%. Finally, we highlight the importance of OG estimation in the case of NCPA compensation. The proposed method is applied to the PyWFS.
△ Less
Submitted 15 July, 2020; v1 submitted 15 June, 2020;
originally announced June 2020.
-
Limitations imposed by optical turbulence profile structure and evolution on tomographic reconstruction for the ELT
Authors:
O. J. D. Farley,
J. Osborn,
T. Morris,
T. Fusco,
B. Neichel,
C. Correia,
R. W. Wilson
Abstract:
The performance of tomographic adaptive optics systems is intrinsically linked to the vertical profile of optical turbulence. Firstly, a sufficient number of discrete turbulent layers must be reconstructed to model the true continuous turbulence profile. Secondly over the course of an observation, the profile as seen by the telescope changes and the tomographic reconstructor must be updated. These…
▽ More
The performance of tomographic adaptive optics systems is intrinsically linked to the vertical profile of optical turbulence. Firstly, a sufficient number of discrete turbulent layers must be reconstructed to model the true continuous turbulence profile. Secondly over the course of an observation, the profile as seen by the telescope changes and the tomographic reconstructor must be updated. These changes can be due to the unpredictable evolution of turbulent layers on meteorological timescales as short as minutes. Here we investigate the effect of changing atmospheric conditions on the quality of tomographic reconstruction by coupling fast analytical adaptive optics simulation to a large database of 10 691 high resolution turbulence profiles measured over two years by the Stereo-SCIDAR instrument at ESO Paranal, Chile. This work represents the first investigation of these effects with a large, statistically significant sample of turbulence profiles. The statistical nature of the study allows us to assess not only the degradation and variability in tomographic error with a set of system parameters (e.g. number of layers, temporal update period) but also the required parameters to meet some error threshold. In the most challenging conditions where the profile is rapidly changing, these parameters must be far more tightly constrained in order to meet this threshold. By providing estimates of these constraints for a wide range of system geometries as well as the impact of different temporal optimisation strategies we may assist the designers of tomographic AO for the ELT to dimension their systems.
△ Less
Submitted 17 March, 2020;
originally announced March 2020.
-
Design of the HARMONI Pyramid WFS module
Authors:
Noah Schwartz,
Jean-François Sauvage,
Edgard Renault,
Carlos Correia,
Benoit Neichel,
Thierry Fusco,
Kjetil Dohlen,
Kacem El Hadi,
Cyril Petit,
Elodie Choquet,
Vincent Chambouleyron,
Jerome Paufique,
Fraser Clarke,
Niranjan Thatte,
Ian Bryson
Abstract:
Current designs for all three extremely large telescopes show the overwhelming adoption of the pyramid wavefront sensor (P-WFS) as the WFS of choice for adaptive optics (AO) systems sensing on natural guide stars (NGS) or extended objects. The key advantages of the P-WFS over the Shack-Hartmann are known and are mainly provided by the improved sensitivity (fainter NGS) and reduced sensitivity to s…
▽ More
Current designs for all three extremely large telescopes show the overwhelming adoption of the pyramid wavefront sensor (P-WFS) as the WFS of choice for adaptive optics (AO) systems sensing on natural guide stars (NGS) or extended objects. The key advantages of the P-WFS over the Shack-Hartmann are known and are mainly provided by the improved sensitivity (fainter NGS) and reduced sensitivity to spatial aliasing. However, robustness and tolerances of the P-WFS for the ELTs are not currently well understood. In this paper, we present simulation results for the single-conjugate AO mode of HARMONI, a visible and near-infrared integral field spectrograph for the European Extremely Large Telescope. We first explore the wavefront sensing issues related to the telescope itself; namely the island effect (i.e. differential piston) and M1 segments phasing errors. We present mitigation strategies to the island effect and their performance. We then focus on some performance optimisation aspects of the AO design to explore the impact of the RTC latency and the optical gain issues, which will in particular affect the high-contrast mode of HARMONI. Finally, we investigate the influence of the quality of glass pyramid prism itself, and of optical aberrations on the final AO performance. By relaxing the tolerances on the fabrication of the prism, we are able to reduce hardware costs and simplify integration. We show the importance of calibration (i.e. updating the control matrix) to capture any displacement of the telescope pupil and rotation of the support structure for M4. We also show the importance of the number of pixels used for wavefront sensing to relax tolerances of the pyramid prism. Finally, we present a detailed optical design of the pyramid prism, central element of the P-WFS.
△ Less
Submitted 13 March, 2020;
originally announced March 2020.
-
Reconstruction of the ground-layer adaptive-optics point spread function for MUSE Wide Field Mode observations
Authors:
Thierry Fusco,
R. Bacon,
S. Kamann,
S. Conseil,
Benoit Neichel,
Carlos Correia,
Olivier Beltramo-Martin,
Joel Vernet,
Johann Kolb,
Pierre-Yves Madec
Abstract:
Here we describe a simple, efficient, and most importantly fully operational point-spread-function(PSF)-reconstruction approach for laser-assisted ground layer adaptive optics (GLAO) in the frame of the Multi Unit Spectroscopic Explorer (MUSE) Wide Field Mode. Based on clear astrophysical requirements derived by the MUSE team and using the functionality of the current ESO Adaptive Optics Facility…
▽ More
Here we describe a simple, efficient, and most importantly fully operational point-spread-function(PSF)-reconstruction approach for laser-assisted ground layer adaptive optics (GLAO) in the frame of the Multi Unit Spectroscopic Explorer (MUSE) Wide Field Mode. Based on clear astrophysical requirements derived by the MUSE team and using the functionality of the current ESO Adaptive Optics Facility we aim to develop an operational PSF-reconstruction (PSFR) algorithm and test it both in simulations and using on-sky data. The PSFR approach is based on a Fourier description of the GLAO correction to which the specific instrumental effects of MUSE Wide Field Mode (pixel size, internal aberrations, etc.) have been added. It was first thoroughly validated with full end-to-end simulations. Sensitivity to the main atmospheric and AO system parameters was analysed and the code was re-optimised to account for the sensitivity found. Finally, the optimised algorithm was tested and commissioned using more than one year of on-sky MUSE data. We demonstrate with an on-sky data analysis that our algorithm meets all the requirements imposed by the MUSE scientists, namely an accuracy better than a few percent on the critical PSF parameters including full width at half maximum and global PSF shape through the kurtosis parameter of a Moffat function. The PSFR algorithm is publicly available and is used routinely to assess the MUSE image quality for each observation. It can be included in any post-processing activity which requires knowledge of the PSF.
△ Less
Submitted 9 March, 2020;
originally announced March 2020.
-
Multiconjugate Adaptive Optics for Astronomy
Authors:
Francois Rigaut,
Benoit Neichel
Abstract:
Since the year 2000, adaptive optics (AO) has seen the emergence of a variety of new concepts addressing particular science needs; multiconjugate adaptive optics (MCAO) is one of them. By correcting the atmospheric turbulence in 3D using several wavefront sensors and a tomographic phase reconstruction approach, MCAO aims to provide uniform diffraction limited images in the near-infrared over field…
▽ More
Since the year 2000, adaptive optics (AO) has seen the emergence of a variety of new concepts addressing particular science needs; multiconjugate adaptive optics (MCAO) is one of them. By correcting the atmospheric turbulence in 3D using several wavefront sensors and a tomographic phase reconstruction approach, MCAO aims to provide uniform diffraction limited images in the near-infrared over fields of view larger than 1 arcmin square, i.e., 10 to 20 times larger in area than classical single conjugated AO. In this review, we give a brief reminder of the AO principles and limitations, and then focus on aspects particular to MCAO, such as tomography and specific MCAO error sources. We present examples and results from past or current systems: MAD (Multiconjugate Adaptive Optics Demonstrator) and GeMS (Gemini MCAO System) for nighttime astronomy and the AO system, at Big Bear for solar astronomy. We examine MCAO performance (Strehl ratio up to 40percent in H band and full width at half maximum down to 52 mas in the case of MCAO), with a particular focus on photometric and astrometric accuracy, and conclude with considerations on the future of MCAO in the Extremely Large Telescope and post-HST era.
△ Less
Submitted 6 March, 2020;
originally announced March 2020.
-
Pushing Point spread function reconstruction to the next level. Application to SPHERE/ZIMPOL
Authors:
Olivier Beltramo-Martin,
Antonino Marasco,
Thierry Fusco,
Davide Massari,
Julien Milli,
Giuliana Fiorentino,
B. Neichel
Abstract:
Point spread function (PSF) reconstruction (PSF-R) is a well established technique to determine reliably and accurately the PSF from Adaptive Optics (AO) control loop data. We have successfully applied this technique to improve the precision on photometry and astrometry to observation of NGC6121 obtained with SPHERE/ZIMPOL as it will be presented in a forthcoming letter. Firstly, we present the me…
▽ More
Point spread function (PSF) reconstruction (PSF-R) is a well established technique to determine reliably and accurately the PSF from Adaptive Optics (AO) control loop data. We have successfully applied this technique to improve the precision on photometry and astrometry to observation of NGC6121 obtained with SPHERE/ZIMPOL as it will be presented in a forthcoming letter. Firstly, we present the methodology we followed to reconstruct the PSF combining pupil-plane and focal-plane measurements using using our PSF-R method PRIME (Beltramo-Martin et al. 2019), with upgrade of both the model and best-fitting steps compared to previous papers. Secondly, we highlight that PRIME allows to maintain the PSF fitting residual below 0.2% over 2 hours of observation and using only 30 s of AO telemetry, which may have important consequences for telemetry storage for PSF-R purpose on future 30-40 m class telescopes. Finally, we deploy PRIME in a more realistic regime using faint stars so as to identify the precision needed on the initial guess parameters to ensure the convergence towards the optimal solution.
△ Less
Submitted 28 January, 2020;
originally announced January 2020.
-
Physics-based model of the adaptive-optics corrected point-spread-function
Authors:
Romain Fétick,
Thierry Fusco,
Benoit Neichel,
Laurent Mugnier,
Olivier Beltramo-Martin,
Aurélie Bonnefois,
Cyril Petit,
Julien Milli,
Joel Vernet,
Sylvain Oberti,
Roland Bacon
Abstract:
Context. Adaptive optics (AO) systems greatly increase the resolution of large telescopes, but produce complex point spread function (PSF) shapes, varying in time and across the field of view. This PSF must be accurately known since it provides crucial information about optical systems for design, characterisation, diagnostics and image post processing. Aims. We develop here a model of the AO long…
▽ More
Context. Adaptive optics (AO) systems greatly increase the resolution of large telescopes, but produce complex point spread function (PSF) shapes, varying in time and across the field of view. This PSF must be accurately known since it provides crucial information about optical systems for design, characterisation, diagnostics and image post processing. Aims. We develop here a model of the AO long exposure PSF, adapted to various seeing conditions and any AO system. This model is made to match accurately both the core of the PSF and its turbulent halo. Methods. The PSF model we develop is based on a parsimonious parameterization of the phase power spectral density with only five parameters to describe circularly symmetric PSFs and seven parameters for asymmetrical ones. Moreover, one of the parameters is directly the Fried parameter r0 of the turbulence s strength. This physical parameter is an asset in the PSF model since it can be correlated with external measurements of the r0, such as phase slopes from the AO real time computer (RTC) or site seeing monitoring. Results. We fit our model against endtoend simulated PSFs using OOMAO tool, and against on sky PSFs from the SPHERE ZIMPOL imager and the MUSE integral field spectrometer working in AO narrowfield mode. Our model matches the shape of the AO PSF both in the core and the halo, with a sub 1 percent relative error for simulated and experimental data. We also show that we retrieve the r0 parameter with subcentimeter precision on simulated data. For ZIMPOL data, we show a correlation of 97 percent between our r0 estimation and the RTC estimation. Finally, MUSE allows us to test the spectral dependency of the fitted r0 parameter. It follows the theoretical $λ^{6/5}$ evolution with a standard deviation of 0.3 cm. Evolution of other PSF parameters, such as residual phase variance or aliasing, is also discussed.
△ Less
Submitted 7 August, 2019; v1 submitted 6 August, 2019;
originally announced August 2019.
-
Entering into the Wide Field Adaptive Optics Era on Maunakea
Authors:
Gaetano Sivo,
John Blakeslee,
Jennifer Lotz,
Henry Roe,
Morten Andersen,
Julia Scharwachter,
David Palmer,
Scot Kleinman,
Andy Adamson,
Paul Hirst,
Eduardo Marin,
Laure Catala,
Marcos van Dam,
Stephen Goodsell,
Natalie Provost,
Ruben Diaz,
Inger Jorgensen,
Hwihyun Kim,
Marie Lemoine-Busserole,
Celia Blain,
Mark Chun,
Mark Ammons,
Julian Christou,
Charlotte Bond,
Suresh Sivanandam
, et al. (10 additional authors not shown)
Abstract:
As part of the National Science Foundation funded "Gemini in the Era of MultiMessenger Astronomy" (GEMMA) program, Gemini Observatory is developing GNAO, a widefield adaptive optics (AO) facility for Gemini-North on Maunakea, the only 8m-class open-access telescope available to the US astronomers in the northern hemisphere. GNAO will provide the user community with a queue-operated Multi-Conjugate…
▽ More
As part of the National Science Foundation funded "Gemini in the Era of MultiMessenger Astronomy" (GEMMA) program, Gemini Observatory is developing GNAO, a widefield adaptive optics (AO) facility for Gemini-North on Maunakea, the only 8m-class open-access telescope available to the US astronomers in the northern hemisphere. GNAO will provide the user community with a queue-operated Multi-Conjugate AO (MCAO) system, enabling a wide range of innovative solar system, Galactic, and extragalactic science with a particular focus on synergies with JWST in the area of time-domain astronomy. The GNAO effort builds on institutional investment and experience with the more limited block-scheduled Gemini Multi-Conjugate System (GeMS), commissioned at Gemini South in 2013. The project involves close partnerships with the community through the recently established Gemini AO Working Group and the GNAO Science Team, as well as external instrument teams. The modular design of GNAO will enable a planned upgrade to a Ground Layer AO (GLAO) mode when combined with an Adaptive Secondary Mirror (ASM). By enhancing the natural seeing by an expected factor of two, GLAO will vastly improve Gemini North's observing efficiency for seeing-limited instruments and strengthen its survey capabilities for multi-messenger astronomy.
△ Less
Submitted 15 February, 2021; v1 submitted 18 July, 2019;
originally announced July 2019.
-
Identifying optical turbulence profiles for realistic tomographic error in adaptive optics
Authors:
O. J. D. Farley,
J. Osborn,
T. Morris,
T. Fusco,
B. Neichel,
C. Correia,
R. W. Wilson
Abstract:
For extremely large telescopes, adaptive optics will be required to correct the Earth's turbulent atmosphere. The performance of tomographic adaptive optics is strongly dependent on the vertical distribution (profile) of this turbulence. An important way in which this manifests is the tomographic error, arising from imperfect measurement and reconstruction of the turbulent phase at altitude. Conve…
▽ More
For extremely large telescopes, adaptive optics will be required to correct the Earth's turbulent atmosphere. The performance of tomographic adaptive optics is strongly dependent on the vertical distribution (profile) of this turbulence. An important way in which this manifests is the tomographic error, arising from imperfect measurement and reconstruction of the turbulent phase at altitude. Conventionally, a small number of reference profiles are used to obtain this error in simulation however these profiles are not constructed to be representative in terms of tomographic error. It is therefore unknown whether these simulations are providing realistic performance estimates. Here, we employ analytical adaptive optics simulation that drastically reduces computation times to compute tomographic error for 10 691 measurements of the turbulence profile gathered by the Stereo-SCIDAR instrument at ESO Paranal. We assess for the first time the impact of the profile on tomographic error in a statistical manner. We find, in agreement with previous work, that the tomographic error is most directly linked with the distribution of turbulence into discrete, stratified layers. Reference profiles are found to provide mostly higher tomographic error than expected, which we attribute to the fact that these profiles are primarily composed of averages of many measurements resulting in unrealistic, continuous distributions of turbulence. We propose that a representative profile should be defined with respect to a particular system, and that as such simulations with a large statistical sample of profiles must be an important step in the design process.
△ Less
Submitted 8 June, 2019;
originally announced June 2019.
-
Adaptive optics with programmable Fourier-based wavefront sensors: a spatial light modulator approach to the LOOPS testbed
Authors:
Pierre Janin-Potiron,
Vincent Chambouleyron,
Lauren Schatz,
Olivier Fauvarque,
Charlotte Z. Bond,
Yannick Abautret,
Eduard Muslimov,
Kacem El-Hadi,
Jean-François Sauvage,
Kjetil Dohlen,
Benoît Neichel,
Carlos M. Correia,
Thierry Fusco
Abstract:
Wavefront sensors encode phase information of an incoming wavefront into an intensity pattern that can be measured on a camera. Several kinds of wavefront sensors (WFS) are used in astronomical adaptive optics. Amongst them, Fourier-based wavefront sensors perform a filtering operation on the wavefront in the focal plane. The most well known example of a WFS of this kind is the Zernike wavefront s…
▽ More
Wavefront sensors encode phase information of an incoming wavefront into an intensity pattern that can be measured on a camera. Several kinds of wavefront sensors (WFS) are used in astronomical adaptive optics. Amongst them, Fourier-based wavefront sensors perform a filtering operation on the wavefront in the focal plane. The most well known example of a WFS of this kind is the Zernike wavefront sensor, and the pyramid wavefront sensor (PWFS) also belongs to this class. Based on this same principle, new WFSs can be proposed such as the n-faced pyramid (which ultimately becomes an axicone) or the flattened pyramid, depending on whether the image formation is incoherent or coherent. In order to test such novel concepts, the LOOPS adaptive optics testbed hosted at the Laboratoire d'Astrophysique de Marseille has been upgraded by adding a Spatial Light Modulator (SLM). This device, placed in a focal plane produces high-definition phase masks that mimic otherwise bulk optic devices. In this paper, we first present the optical design and upgrades made to the experimental setup of the LOOPS bench. Then, we focus on the generation of the phase masks with the SLM and the implications of having such a device in a focal plane. Finally, we present the first closed-loop results in either static or dynamic mode with different WFS applied on the SLM.
△ Less
Submitted 15 March, 2019;
originally announced March 2019.
-
PRIME: Psf Reconstruction and Identification for Multiple sources characterization Enhancement. Application to Keck NIRC2 imager
Authors:
O. Beltramo-Martin,
C. M. Correia,
S. Ragland,
L. Jolissaint,
B. Neichel,
T. Fusco,
P. L. Wizinowich
Abstract:
In order to enhance accuracy of astrophysical estimates obtained on Adaptive-optics (AO) images, such as photometry and astrometry, we investigate a new concept to constrain the Point Spread Function (PSF) model called PSF Reconstruction and Identification for Multi-sources characterization Enhancement (PRIME), that handles jointly the science image and the AO control loop data. We present in this…
▽ More
In order to enhance accuracy of astrophysical estimates obtained on Adaptive-optics (AO) images, such as photometry and astrometry, we investigate a new concept to constrain the Point Spread Function (PSF) model called PSF Reconstruction and Identification for Multi-sources characterization Enhancement (PRIME), that handles jointly the science image and the AO control loop data. We present in this paper the concept of PRIME and validate it on Keck II telescope NIRC2 images. We show that by calibrating the PSF model over the scientific image, PSF reconstruction achieves 1\% and 3 mas of accuracy on respectively the Strehl-ratio and the PSF full width at half maximum. We show on NIRC2 binary images that PRIME is sufficiently robust to noise to retain photometry and astrometry precision below 0.005 mag and 100$μ$as on a $m_H=$ 14 mag object. Finally, we also validate that PRIME performs a PSF calibration on the triple system Gl569BAB which provides a separation of 66.73$\pm 1.02$ and a differential photometry of 0.538$\pm 0.048$, compared to the reference values obtained with the extracted PSF which are 66.76 mas $\pm$ 0.94 and 0.532 mag $\pm$ 0.041.
△ Less
Submitted 7 March, 2019;
originally announced March 2019.
-
Kernel formalism applied to Fourier based wave front sensing in presence of residual phases
Authors:
Olivier Fauvarque,
Pierre Janin-Potiron,
Carlos Correia,
Yoann Brule,
Benoit Neichel,
Vincent Chambouleyron,
Jean-Francois Sauvage,
Thierry Fusco
Abstract:
In this paper, we describe Fourier-based Wave Front Sensors (WFS) as linear integral operators, characterized by their Kernel. In a first part, we derive the dependency of this quantity with respect to the WFS's optical parameters: pupil geometry, filtering mask, tip/tilt modulation. In a second part we focus the study on the special case of convolutional Kernels. The assumptions required to be in…
▽ More
In this paper, we describe Fourier-based Wave Front Sensors (WFS) as linear integral operators, characterized by their Kernel. In a first part, we derive the dependency of this quantity with respect to the WFS's optical parameters: pupil geometry, filtering mask, tip/tilt modulation. In a second part we focus the study on the special case of convolutional Kernels. The assumptions required to be in such a regime are described. We then show that these convolutional kernels allow to drastically simplify the WFS's model by summarizing its behavior in a concise and comprehensive quantity called the WFS's Impulse Response. We explain in particular how it allows to compute the sensor's sensitivity with respect to the spatial frequencies. Such an approach therefore provides a fast diagnostic tool to compare and optimize Fourier-based WFSs. In a third part, we develop the impact of the residual phases on the sensor's impulse response, and show that the convolutional model remains valid. Finally, a section dedicated to the Pyramid WFS concludes this work, and illustrates how the slopes maps are easily handled by the convolutional model.
△ Less
Submitted 21 June, 2019; v1 submitted 14 February, 2019;
originally announced February 2019.
-
Closing the gap between Earth-based and interplanetary mission observations: Vesta seen by VLT/SPHERE
Authors:
R. JL. Fétick,
L. Jorda,
P. Vernazza,
M. Marsset,
A. Drouard,
T. Fusco,
B. Carry,
F. Marchis,
J. Hanuš,
M. Viikinkoski,
M. Birlan,
P. Bartczak,
J. Berthier,
J. Castillo-Rogez,
F. Cipriani,
F. Colas,
G. Dudziński,
C. Dumas,
M. Ferrais,
E. Jehin,
M. Kaasalainen,
A. Kryszczynska,
P. Lamy,
H. Le Coroller,
A. Marciniak
, et al. (12 additional authors not shown)
Abstract:
Context. Over the past decades, several interplanetary missions have studied small bodies in situ, leading to major advances in our understanding of their geological and geophysical properties. These missions, however, have had a limited number of targets. Among them, the NASA Dawn mission has characterised in detail the topography and albedo variegation across the surface of asteroid (4) Vesta do…
▽ More
Context. Over the past decades, several interplanetary missions have studied small bodies in situ, leading to major advances in our understanding of their geological and geophysical properties. These missions, however, have had a limited number of targets. Among them, the NASA Dawn mission has characterised in detail the topography and albedo variegation across the surface of asteroid (4) Vesta down to a spatial resolution of approximately 20 m/pixel scale.
Aims. Here our aim was to determine how much topographic and albedo information can be retrieved from the ground with VLT/SPHERE in the case of Vesta, having a former space mission (Dawn) providing us with the ground truth that can be used as a benchmark.
Methods. We observed Vesta with VLT/SPHERE/ZIMPOL as part of our ESO large programme (ID 199.C-0074) at six different epochs, and deconvolved the collected images with a parametric point spread function (PSF). We then compared our images with synthetic views of Vesta generated from the 3D shape model of the Dawn mission, on which we projected Vesta's albedo information.
Results. We show that the deconvolution of the VLT/SPHERE images with a parametric PSF allows the retrieval of the main topographic and albedo features present across the surface of Vesta down to a spatial resolution of approximately 20-30 km. Contour extraction shows an accuracy of approximately 1 pixel (3.6 mas). The present study provides the very first quantitative estimate of the accuracy of ground-based adaptive-optics imaging observations of asteroid surfaces.
Conclusions. In the case of Vesta, the upcoming generation of 30-40m telescopes (ELT, TMT, GMT) should in principle be able to resolve all of the main features present across its surface, including the troughs and the north-south crater dichotomy, provided that they operate at the diffraction limit.
△ Less
Submitted 4 February, 2019;
originally announced February 2019.
-
Overview of the European Extremely Large Telescope and its instrument suite
Authors:
B. Neichel,
D. Mouillet,
E. Gendron,
C. Correia,
J. F. Sauvage,
T. Fusco
Abstract:
The European Extremely Large Telescope will see first lights by the end of 2024. With a diameter of almost 40 meters, it will be the biggest optical telescope ever built from the ground. The ELT will open a brand new window in a sensitivity / spatial angular resolution parameter space. To take the full benefit of the scientific potential of this giant, all the instruments will be equipped with Ada…
▽ More
The European Extremely Large Telescope will see first lights by the end of 2024. With a diameter of almost 40 meters, it will be the biggest optical telescope ever built from the ground. The ELT will open a brand new window in a sensitivity / spatial angular resolution parameter space. To take the full benefit of the scientific potential of this giant, all the instruments will be equipped with Adaptive Optics (AO), providing the sharpest images. This paper provides a quick overview of the AO capabilities of the future instruments to be deployed at the ELT, highlight some of the expected performance and describe a couple of technical challenges that are still to tackle for an optimal scientific use. This paper has been presented at the "Societe Francaise d'Astronomie et Astrophysique" symposium in Bordeaux 2018, it is then naturally biased toward the French contribution for the ELT.
△ Less
Submitted 17 December, 2018;
originally announced December 2018.
-
Turbulent and AO corrected Point-Spread-Function as convolutive orders of the phase Power-Spectral-Density
Authors:
R. JL. Fétick,
B. Neichel,
L. M. Mugnier,
A. Montmerle-Bonnefois,
T. Fusco
Abstract:
Ground-based astronomy is severely limited by the atmospheric turbulence, resulting in a large Point-Spread-Function (PSF) and poor imaging resolution. Even imaging with Adaptive Optics (AO) cannot completely correct the aberrated wavefront, and a residual turbulence still corrupts the observation. Thus the consequences of the turbulence on the PSF is of first interest when building any ground-bas…
▽ More
Ground-based astronomy is severely limited by the atmospheric turbulence, resulting in a large Point-Spread-Function (PSF) and poor imaging resolution. Even imaging with Adaptive Optics (AO) cannot completely correct the aberrated wavefront, and a residual turbulence still corrupts the observation. Thus the consequences of the turbulence on the PSF is of first interest when building any ground-based telescope. The Power Spectral Density (PSD) of a spatially stationary turbulent phase carries all the information needed for describing the long-exposure PSF. We then develop an analytical description of the long-exposure PSF as a series expansion of the aberrated phase PSD. Our description of the PSF given the PSD of the phase is a simple theoretical way to describe the impact of turbulence on the PSF. We also show accordance with previous papers when restricting our model to its first expansion order. Finally we derive applications of our formula to some particular cases, such as Kolmogorov or von-Kármán models, or the AO correction impact on the PSF.
△ Less
Submitted 17 January, 2019; v1 submitted 18 September, 2018;
originally announced September 2018.
-
A new calibration strategy for adaptive telescopes with pyramid WFS
Authors:
C. T. Heritier,
S. Esposito,
T. Fusco,
B. Neichel,
S. Oberti,
R. Briguglio,
G. Agapito,
A. Puglisi,
E. Pinna,
P. -Y. Madec
Abstract:
Several telescopes include large Deformable Mirrors (DM) located directly inside the telescope. These adaptive telescopes trigger new constraints for the calibration of the Adaptive Optics (AO) systems as they usually offer no access to an artificial calibration source for the interaction matrix measurement. Moreover, the optical propagation between the DM and the Wave-Front Sensor (WFS) may evolv…
▽ More
Several telescopes include large Deformable Mirrors (DM) located directly inside the telescope. These adaptive telescopes trigger new constraints for the calibration of the Adaptive Optics (AO) systems as they usually offer no access to an artificial calibration source for the interaction matrix measurement. Moreover, the optical propagation between the DM and the Wave-Front Sensor (WFS) may evolve during the operation, resulting in mis-registrations that highly affect the AO performance and thus the scientific observation. They have to be measured and compensated, for instance by updating the calibration. A new strategy consists of estimating the mis-registrations and injecting them into synthetic models to generate noise-free interaction matrices. This pseudo-synthetic approach is the baseline for the Adaptive Optics Facility working with a Shack-Hartmann WFS and seems particularly suited for the future Extremely Large Telescope as the calibration will have to be regularly updated, for a large numbers of actuators. In this paper, the feasibility of a pseudo synthetic calibration with Pyramid WFS at the Large Binocular Telescope (LBT) is investigated. A synthetic model of the LBT AO systems is developed, and the procedure to adjust the mis-registrations parameters is introduced, extracting them from an experimental interaction matrix. We successfully tested an interaction matrix generated from the model on the real system in high-order AO mode. We recorded a slightly better performance with respect to the experimental one. This work demonstrates that a high accuracy calibration can be obtained using the pseudo synthetic approach with pyramid WFS.
△ Less
Submitted 9 January, 2019; v1 submitted 13 September, 2018;
originally announced September 2018.
-
Focal plane $C_n^2(h)$ profiling based on single conjugate adaptive optics compensated images
Authors:
O. Beltramo-Martin,
C. M. Correia,
B. Neichel,
T. Fusco
Abstract:
Knowledge of the atmospheric turbulence in the telescope line-of-sight is crucial for wide-field observations assisted by adaptive optics (AO), for which the Point Spread Function (PSF) becomes strongly elongated due to the anisoplanatism effect. This one must be modelled accurately to extrapolate the PSF anywhere across the Field of view (FOV) and improve the science exploitation. However, anisop…
▽ More
Knowledge of the atmospheric turbulence in the telescope line-of-sight is crucial for wide-field observations assisted by adaptive optics (AO), for which the Point Spread Function (PSF) becomes strongly elongated due to the anisoplanatism effect. This one must be modelled accurately to extrapolate the PSF anywhere across the Field of view (FOV) and improve the science exploitation. However, anisoplanatism is a function of the Cn2(h) profile, that is not directly accessible from single conjugate AO telemetry. One may rely on external profilers, but recent studies have highlighted more than 10% of discrepancies with AO internal measurements, while we aim better than 1% of accuracy for PSF modelling. To tackle this existing limitation, we present the Focal plane profiling (FPP), as a $C_n^2(h)$ profiling method that relies on post-AO focal plane images. We demonstrate such an approach complies with a 1%-level of accuracy on the $C_n^2(h)$ estimation and establish how this accuracy varies regarding the calibration stars magnitudes and positions in the field. We highlight that photometry and astrometry errors due to PSF mis-modelling reaches respectively 1% and 50μas using FPP on a Keck baseline, with a preliminary calibration using a star of magnitude H=14 at 20". We also validate this concept using Canadas NRC-Herzberg HENOS testbed images in comparing FPP retrieval with alternative $C_n^2(h)$ measurements on HeNOS. The FPP approach allows to profile the $C_n^2(h)$ using the SCAO systems and improve significantly the PSF characterisation. Such a methodology is also ELT-size compliant and will be extrapolated to tomographic systems in a near future.
△ Less
Submitted 31 August, 2018;
originally announced August 2018.