-
Influence of pulse modulation frequency on helium RF atmospheric pressure plasma jet characteristics
Authors:
Mahreen,
G. Veda Prakash,
Satyananda Kar,
Debaprasad Sahu,
A. Ganguli
Abstract:
This work investigates the influence of pulse modulation frequency ranging from 50 Hz- 10 kHz on the helium RF atmospheric pressure plasma jet's fundamental characteristics. The impact of modulation frequency on plasma jet discharge behavior, geometrical variation, reactive species emission, and plasma parameters (gas temperature Tg, electron excitation temperature Texc, and electron density (ne)…
▽ More
This work investigates the influence of pulse modulation frequency ranging from 50 Hz- 10 kHz on the helium RF atmospheric pressure plasma jet's fundamental characteristics. The impact of modulation frequency on plasma jet discharge behavior, geometrical variation, reactive species emission, and plasma parameters (gas temperature Tg, electron excitation temperature Texc, and electron density (ne) are studied using various diagnostics such as optical imaging, emission spectra, and thermal diagnostics. From the experiments, it is observed that operating the plasma jet at low pulse modulation frequencies (around 50 Hz) provides enhanced plasma dimensions, higher electron densities and greater optical emission from reactive species (viz., He I, O, OH, N2+, etc.) as compared to the higher modulation frequencies. Besides the low power consumption, the three times less gas temperature of the modulated plasma jet than the continuous wave mode makes it more advantageous for the applications. Moreover, the influence of duty cycle (D) and applied RF power (P) on the plasma jet characteristics are also discussed. It is found that 10- 40% duty cycle operation provides the most favorable attributes. More importantly, the concern of shorter plasma length in RF plasma jets is overcome by operating at 10- 20% duty cycle with increased applied power. This work thoroughly characterizes helium atmospheric pressure RF plasma jet with a wide range of pulse mode operating parameters, which could help select appropriate operating conditions for various industrial and biomedical applications.
△ Less
Submitted 26 December, 2022;
originally announced December 2022.
-
Recent advances in optics (RAO): Contribution of D Narayana Rao in optics and photonics research in India
Authors:
Jitendra Nath Acharyya,
G Vijaya Prakash
Abstract:
The fist documented speculations on light were found in oriental and Greek schools of philosophy. The investigations on the light in India were rooted way back to the ancient era. The Indian Samkhya, Nyaya, and Vaisheshika identified light or fie (Tejas) as one of the key elements among the fie elementary things of the universe. The pioneering results of optics and spectroscopy were witnessed in t…
▽ More
The fist documented speculations on light were found in oriental and Greek schools of philosophy. The investigations on the light in India were rooted way back to the ancient era. The Indian Samkhya, Nyaya, and Vaisheshika identified light or fie (Tejas) as one of the key elements among the fie elementary things of the universe. The pioneering results of optics and spectroscopy were witnessed in the era of stellar people like Sir Jagadish Chandra Bose and Sir C V Raman. The research has then taken a new directive into the development of nonlinear optics and photonics after the invention of the laser. The present article reviews the past few decades pioneering works of Prof. D Narayana Rao, an experimental physicist, in the context of optics and photonics in India. The most notable contributions of Prof Rao, introduced in India for the fist time, are white-light interferometry, degenerate four-wave mixing (DFWM), electric field induced second harmonic generation (EFISHG), incoherent laser spectroscopy (using dye laser), and femtosecond lasers for creating nano/microstructures.
△ Less
Submitted 2 December, 2021;
originally announced December 2021.
-
Photonic and electronic state interactions in BaTiO3 based Optical Microcavity
Authors:
Jitendra Nath Acharyya,
R. B. Gangineni,
D. Narayana Rao,
G. Vijaya Prakash
Abstract:
The photonic modes mediated absorption dynamics at femtosecond time scales along with the control of spontaneous emission tunability are investigated all-dielectric optical microcavity having BaTiO3 (BTO) as defect layer. The cavity-enhanced transient absorption reveals the dominant excited state absorption (ESA) of both photonic and electronic modes due to strong third-order optical nonlinearity…
▽ More
The photonic modes mediated absorption dynamics at femtosecond time scales along with the control of spontaneous emission tunability are investigated all-dielectric optical microcavity having BaTiO3 (BTO) as defect layer. The cavity-enhanced transient absorption reveals the dominant excited state absorption (ESA) of both photonic and electronic modes due to strong third-order optical nonlinearity influence. Photoluminescence of BTO is found to be guided and tuned by the photonic cavity mode. Such active photonic structures can be envisaged as a potential candidate in nonlinear optics and photonic device applications.
△ Less
Submitted 2 December, 2021;
originally announced December 2021.
-
Ultrafast nonlinear pulse propagation dynamics in metal-dielectric periodic photonic architectures
Authors:
Jitendra Nath Acharyya,
Akhilesh Kumar Mishra,
D. Narayana Rao,
Ajit Kumar,
G. Vijaya Prakash
Abstract:
One-dimensional (1D) metal-dielectric (MD) periodic structures take advantage of large refractive index contrast between metal and dielectrics to invoke extremely high nonlinear ultrafast responses of metal. These structures are also special due to their extremely high laser damage threshold. The Bragg like 1D MD structure (Ag/SiO2)4 enables strong optical field confinement with much enhanced nonl…
▽ More
One-dimensional (1D) metal-dielectric (MD) periodic structures take advantage of large refractive index contrast between metal and dielectrics to invoke extremely high nonlinear ultrafast responses of metal. These structures are also special due to their extremely high laser damage threshold. The Bragg like 1D MD structure (Ag/SiO2)4 enables strong optical field confinement with much enhanced nonlinear features as compared to simple metal or single (Ag/SiO2)1 structure. In the present work, the ultrafast nonlinear optical responses of the above structures are investigated via femtosecond broadband optical pump-probe technique. The enhanced nonlinear optical absorption is of reverse saturation of absorption (RSA) nature, resulted due to free-carrier absorption (FCA) and excited-state absorption (ESA) processes. The spectral nonlinearities are closely related to the pump-induced modification of the metal's dielectric functions, which are qualitatively visualized by transfer matrix and two-temperature models. The ultrafast temporal evolution of nonlinear absorption clearly demonstrated enhanced optical nonlinearity, disentangled by the electron-electron and electron-phonon dynamic interactions at picosecond time scales. A phenomenological pulse propagation model is employed that incorporates the experimentally obtained nonlinear absorption coefficients and different nonlinear effects exhibited by the system. Nonlinearity plays a crucial role in controlling the ultrafast pulse propagation and could open a new window for many nonlinear device applications. The findings of these new optical materials could possibly pave the way for promising applications in ultrafast photonics.
△ Less
Submitted 15 September, 2021; v1 submitted 17 February, 2021;
originally announced February 2021.
-
Study of diamagnetism in laser-produced plasma using B-dot probe
Authors:
Narayan Behera,
R. K. Singh,
G. Veda Prakash,
Kiran Patel,
H. C. Joshi,
Ajai Kumar
Abstract:
Time-varying diamagnetism in laser-produced plasma moving across the transverse magnetic field with different field strengths has been studied using fast imaging and magnetic probe. The emphasis of the present work is on the development of suitable B-dot probe and quantitative analysis of induced diamagnetic field in an expanding plasma plume. A Helmholtz coil associated with pulsed power system i…
▽ More
Time-varying diamagnetism in laser-produced plasma moving across the transverse magnetic field with different field strengths has been studied using fast imaging and magnetic probe. The emphasis of the present work is on the development of suitable B-dot probe and quantitative analysis of induced diamagnetic field in an expanding plasma plume. A Helmholtz coil associated with pulsed power system is used to produce uniform magnetic field of different strengths. Helmholtz coil allowed the plume imaging along the magnetic field lines, which gives the direct structural information of the induced diamagnetic cavity. A high frequency three-axis B-dot probe has been developed to measure the transient magnetic field. Different experimental approaches have been used to test the response, sensitivity and calibration of the developed probe. Findings indicate that plasma plume shows the perfect diamagnetic behaviour for the external field varying from 0.13 T to 0.57 T where the induced magnetic field almost completely displaced the external magnetic field.
△ Less
Submitted 9 December, 2019;
originally announced December 2019.
-
Characterization of atmospheric pressure plasma plume
Authors:
G. Veda Prakash,
Kiran Patel,
Narayan Behera,
Ajai Kumar
Abstract:
In order to optimize the parameters of the plasma plume for atmospheric pressure plasma applications such as biological and industrial applications, it is highly necessary to thoroughly understand its characteristics. In this paper, various diagnostic techniques are discussed to characterize the atmospheric pressure plasma plume. The major emphasis of this work is to utilize possibly simple method…
▽ More
In order to optimize the parameters of the plasma plume for atmospheric pressure plasma applications such as biological and industrial applications, it is highly necessary to thoroughly understand its characteristics. In this paper, various diagnostic techniques are discussed to characterize the atmospheric pressure plasma plume. The major emphasis of this work is to utilize possibly simple methods, low complexity in post data analysis and obtain in-situ information. The parameters of the plasma plume such as spatial variation of gas temperature, electron excitation temperature, plume velocity, plume current, electron density are experimentally measured. In addition, plasma discharge behavior and plume formation with various gas flow rates and applied voltage are studied. The characterization of the above parameters is carried out by using electrical diagnostics (voltage probe and a current sensor), Optical diagnostics (optical emission spectroscopy (OES), fast imaging method using ICCD camera), and thermocouple. The plasma plume/gas temperature along the plume length is measured by using a simple K-type thermocouple and is found to be in the range of (42.5 - 24.5) deg C. The OES is used to estimate the electron excitation temperature of plasma plume and to identify the key reactive species (OH, NO, N2+, O, etc.) present in the plume. ICCD camera is utilized to capture the temporal evolution of plasma and to estimate the plume velocity along the plume length. The current transformer is utilized to measure the plume current along the plume length. By using the velocity and current information, the plasma density is evaluated, and the obtained values are in the range of (0.069-5.96)x 10^12 cm^-3. The above range of parameters and tunable nature of our designed plasma source will be useful for the development and optimization of plasma sources for various applications.
△ Less
Submitted 21 May, 2020; v1 submitted 8 December, 2019;
originally announced December 2019.
-
Study of plume dynamics and plasma density during its expansion
Authors:
G. Veda Prakash,
Kiran Patel,
Narayan Behera,
Ajai Kumar
Abstract:
The electron density is one of the crucial parameters in plasma plume, which plays a major role in producing the key reactive species required for biological and industrial applications. In this work, experiments are performed to estimate the spatial variation of plasma density in a steady plume. The time-resolved images obtained from the ICCD camera, plume current measurements are utilized for es…
▽ More
The electron density is one of the crucial parameters in plasma plume, which plays a major role in producing the key reactive species required for biological and industrial applications. In this work, experiments are performed to estimate the spatial variation of plasma density in a steady plume. The time-resolved images obtained from the ICCD camera, plume current measurements are utilized for estimating the plasma density. We observed the plasma density increases from the glass nozzle to the plume tip. This increase in plasma density is due to the combined effect of reduction of drift velocity, charge, and area confinement of plume. Further, the intensity plots of the ICCD camera images obtained with larger exposure time validate the increased density at the plume tip. The plasma density along the plume gives information about the approximation to the plume exposure time desired and the impact it creates on the very sensitive targets. The spatial variation of plasma density in a plume is a futuristic requirement for several biological and industrial applications considering a single plasma device.
△ Less
Submitted 22 October, 2018;
originally announced October 2018.
-
Angle dependent localized surface plasmon resonance from silver nanoparticles embedded in SiO2 thin film
Authors:
R. K. Bommali,
D. P. Mahapatra,
H. Gupta,
Puspendu Guha,
D. Topwal,
G. Vijaya Prakash,
S. Ghosh,
P. Srivastava
Abstract:
Near surface silver nanoparticles embedded in silicon oxide were obtained by 40 keV silver negative ion implantation without the requirement of an annealing step. Ion beam induced local heating within the film leads to an exo-diffusion of the silver ions towards the film surface resulting in the protrusion of larger nanoparticles. Cross-sectional transmission electron microscopy (XTEM) reveals the…
▽ More
Near surface silver nanoparticles embedded in silicon oxide were obtained by 40 keV silver negative ion implantation without the requirement of an annealing step. Ion beam induced local heating within the film leads to an exo-diffusion of the silver ions towards the film surface resulting in the protrusion of larger nanoparticles. Cross-sectional transmission electron microscopy (XTEM) reveals the presence of poly-disperse nanoparticles (NPs), ranging between 2 nm-20 nm, at different depths of the SiO2 film. The normal incidence reflectance spectrum shows a double kink feature in the vicinity of 400nm, indicating a strong localized surface plasmon resonance (LSPR) from the embedded NPs. However, due to overlap of the bilayer interference and LSPR, the related features are difficult to separate. The ambiguity in associating the correct kink with the LSPR related absorption is cleared with the use of transfer matrix simulations in combination with an effective medium approximation. The simulations are further verified with angle dependent reflectance measurements. Additionally, transfer matrix simulation is also used to calculate the electric field intensity profile through the depth of the film, wherein an enhanced electric field intensity is predicted at the surface of the implanted films.
△ Less
Submitted 26 May, 2018;
originally announced May 2018.
-
Investigating resonance energy transfer from protein molecules to van der Waals nanosheets
Authors:
Arun Singh Patel,
Praveen Mishra,
Pawan K. Kanaujia,
Syed Shariq Husain,
G. Vijaya Prakash,
Anirban Chakraborti
Abstract:
The resonance energy transfer (RET) from tryptophan present in bovine serum albumin (BSA) to two dimensional (2D) nanomaterials has been reported. In these bio-nano systems, BSA molecules act as efficient donors while 2D van der Waals nanosheets of graphene, molybdenum disulfide (Mo$S_2$) and tungsten disulfide (W$S_2$) act as acceptors. The fluorescence emission from tryptophan arises at 350 nm,…
▽ More
The resonance energy transfer (RET) from tryptophan present in bovine serum albumin (BSA) to two dimensional (2D) nanomaterials has been reported. In these bio-nano systems, BSA molecules act as efficient donors while 2D van der Waals nanosheets of graphene, molybdenum disulfide (Mo$S_2$) and tungsten disulfide (W$S_2$) act as acceptors. The fluorescence emission from tryptophan arises at 350 nm, in presence of 2D nanosheets, the fluorescence intensity of BSA decreases. The time resolved fluorescence study shows that there is decrease in the fluorescence lifetime of BSA molecules in presence of 2D nanosheets. The decrease in fluorescence lifetime of BSA confirms the energy transfer phenomenon in bio-nano interactions. This study is important for finding the bio-compatibility of 2D nanomaterials in biological applications.
△ Less
Submitted 22 November, 2016;
originally announced November 2016.
-
Gold nanoflowers as efficient hot-spots for surface enhanced Raman scattering
Authors:
Arun Singh Patel,
Subhavna Juneja,
Pawan K. Kanaujia,
G. Vijaya Prakash,
Anirban Chakraborti,
Jaydeep Bhattacharya
Abstract:
Gold nanoflowers are known for their use as efficient host for surface enhanced Raman scattering of organic dye molecules. In this article, gold nanoflowers have been synthesised and rhodamine 6 G (R6G) molecules have been used as probe molecules. It is found that the gold nanoflowers can detect the presence of R6G molecules upto 10^{-10} M. The petals of these nanoflowers play an important role f…
▽ More
Gold nanoflowers are known for their use as efficient host for surface enhanced Raman scattering of organic dye molecules. In this article, gold nanoflowers have been synthesised and rhodamine 6 G (R6G) molecules have been used as probe molecules. It is found that the gold nanoflowers can detect the presence of R6G molecules upto 10^{-10} M. The petals of these nanoflowers play an important role for the enhancement of Raman signals, and the intensity of Raman signals is enhanced many folds in presence of gold nanoflowers - the enhancement factor is of the order of 10^6. This is explained in terms of electromagnetic mechanism.
△ Less
Submitted 11 April, 2016;
originally announced April 2016.
-
Resonance Raman scattering and ab initio calculation of electron energy loss spectra of MoS2 nanosheets
Authors:
Anirban Chakraborti,
Arun Singh Patel,
Pawan K. Kanaujia,
Palash Nath,
G. Vijaya Prakash,
Dirtha Sanyal
Abstract:
The presence of electron energy loss (EELS) peak is proposed theoretically in molybdenum disulfide (MoS2) nanosheets. Using density functional theory simulations and calculations, one EELS peak is identified in the visible energy range, for MoS2 nanosheets with molybdenum vacancy. Experimentally, four different laser sources are used for the Raman scattering study of MoS2 nanosheets, which show tw…
▽ More
The presence of electron energy loss (EELS) peak is proposed theoretically in molybdenum disulfide (MoS2) nanosheets. Using density functional theory simulations and calculations, one EELS peak is identified in the visible energy range, for MoS2 nanosheets with molybdenum vacancy. Experimentally, four different laser sources are used for the Raman scattering study of MoS2 nanosheets, which show two distinct Raman peaks, one at 385 cm-1 (E12g) and the other at 408 cm-1 (A1g). In the cases of three laser sources with wavelengths 405 nm (3.06 eV), 632 nm (1.96 eV) and 785 nm (1.58 eV), respectively, the intensity of E12g Raman peak is more than the A1g Raman peak, while in the case of excitation source of 532 nm (2.33 eV), the intensity profile is reversed and A1g peak is the most intense. Thus a resonance Raman scattering phenomenon is observed for 532 nm laser source.
△ Less
Submitted 8 April, 2016;
originally announced April 2016.
-
Optical properties of Er3+ doped alkali-chloro phosphate glasses for optical amplifiers
Authors:
K. Pradeesh,
C. J. Oton,
V. K. Agotiya,
M. Raghavendra,
G. Vijaya Prakash
Abstract:
A new class of Erbium doped glasses with compositions xNa2O - (60-x)PbCl2 - 40P2O5 (x=0, 10, 20 and 30) were fabricated and characterized for optical properties. Absorption spectra were analyzed for important Judd-Ofelt parameters from the integrated intensities of various Er3+ glass absorption bands. Photoluminescence (PL) and its decay behavior studies were carried out for the transition 4I13/…
▽ More
A new class of Erbium doped glasses with compositions xNa2O - (60-x)PbCl2 - 40P2O5 (x=0, 10, 20 and 30) were fabricated and characterized for optical properties. Absorption spectra were analyzed for important Judd-Ofelt parameters from the integrated intensities of various Er3+ glass absorption bands. Photoluminescence (PL) and its decay behavior studies were carried out for the transition 4I13/2 -> 4I15/2. A systematic correlation between the Judd-Ofelt parameter {omega}2 and the covalent nature of the glass matrix was observed, due to increased role of bridging oxygens in the glass network. The PL broadness and life times of 4I13/2_> 4I15/2 transition were typically in the range of 40-60nm and 2.13-2.5ms respectively. These glasses broadly showed high transparency, high refractive index, shorter life times and, most importantly, these glasses were found to be capable of being doped with larger concentrations of Er3+ (up to 4 wt%). Increase of Er3+ concentration resulted in the increase in PL line-widths with no significant effect of concentration quenching, indicating that these glasses are suitable for optical fibre/waveguide amplifiers.
△ Less
Submitted 7 May, 2007;
originally announced May 2007.
-
Pyramidal micro-mirrors for microsystems and atom chips
Authors:
M. Trupke,
F. Ramirez-Martinez,
E. A. Curtis,
J. P. Ashmore,
S. Eriksson,
E. A. Hinds,
Z. Moktadir,
C. Gollasch,
M. Kraft,
G. Vijaya Prakash,
J. J. Baumberg
Abstract:
Concave pyramids are created in the (100) surface of a silicon wafer by anisotropic etching in potassium hydroxide. High quality micro-mirrors are then formed by sputtering gold onto the smooth silicon (111) faces of the pyramids. These mirrors show great promise as high quality optical devices suitable for integration into MOEMS and atom chips. We have shown that structures of this shape can be…
▽ More
Concave pyramids are created in the (100) surface of a silicon wafer by anisotropic etching in potassium hydroxide. High quality micro-mirrors are then formed by sputtering gold onto the smooth silicon (111) faces of the pyramids. These mirrors show great promise as high quality optical devices suitable for integration into MOEMS and atom chips. We have shown that structures of this shape can be used to laser-cool and hold atoms in a magneto-optical trap.
△ Less
Submitted 13 September, 2005;
originally announced September 2005.
-
Fabrication and characterisation of CdSe photonic structures from self-assembly
Authors:
G. Vijaya Prakash,
Rahul Singh,
Ashwani Kumar,
Rashmish K. Mishra
Abstract:
We demonstrate here a method to fabricate CdSe photonic crystal from a very cheap fabrication route of templated self-assembly. The hexagonal close-packed photonic crystals are formed by the electrochemical growth of CdSe through the interstitial spaces between polymer nano/micro sphere templates. The confocal voids containing photonic crystals can be made either interconnected or well separated…
▽ More
We demonstrate here a method to fabricate CdSe photonic crystal from a very cheap fabrication route of templated self-assembly. The hexagonal close-packed photonic crystals are formed by the electrochemical growth of CdSe through the interstitial spaces between polymer nano/micro sphere templates. The confocal voids containing photonic crystals can be made either interconnected or well separated, with high uniformity. Structural and optical characterization confirms the good quality of electrochemically grown CdSe. These cheaply fabricated 2D photonic crystals provide a wide range of opportunities for optoelectronic devices.
△ Less
Submitted 1 December, 2005; v1 submitted 24 July, 2005;
originally announced July 2005.
-
Fabrication of micro-mirrors with pyramidal shape using anisotropic etching of silicon
Authors:
Z. Moktadir,
C. Gollasch,
E. Koukharenko,
M. Kraft,
G. Vijaya Prakash,
J. J. Baumberg,
M. Trupke,
S. Eriksson,
E. A. Hinds
Abstract:
Gold micro-mirrors have been formed in silicon in an inverted pyramidal shape. The pyramidal structures are created in the (100) surface of a silicon wafer by anisotropic etching in potassium hydroxide. High quality micro-mirrors are then formed by sputtering gold onto the smooth silicon (111) faces of the pyramids. These mirrors show great promise as high quality optical devices suitable for in…
▽ More
Gold micro-mirrors have been formed in silicon in an inverted pyramidal shape. The pyramidal structures are created in the (100) surface of a silicon wafer by anisotropic etching in potassium hydroxide. High quality micro-mirrors are then formed by sputtering gold onto the smooth silicon (111) faces of the pyramids. These mirrors show great promise as high quality optical devices suitable for integration into MOEMS systems.
△ Less
Submitted 2 September, 2004;
originally announced September 2004.
-
Tunable Resonant Optical MicroCavities by Self-Assembled Templating
Authors:
G. V. Prakash,
L. Besombes,
T. Kelf,
P. N. Bartlett,
M. E. Abdelsalam,
J. J. Baumberg
Abstract:
Micron-scale optical cavities are produced using a combination of template sphere self-assembly and electrochemical growth. Transmission measurements of the tunable microcavities show sharp resonant modes with a Q-factor>300, and 25-fold local enhancement of light intensity. The presence of transverse optical modes confirms the lateral confinement of photons. Calculations show sub-micron mode vo…
▽ More
Micron-scale optical cavities are produced using a combination of template sphere self-assembly and electrochemical growth. Transmission measurements of the tunable microcavities show sharp resonant modes with a Q-factor>300, and 25-fold local enhancement of light intensity. The presence of transverse optical modes confirms the lateral confinement of photons. Calculations show sub-micron mode volumes are feasible. The small mode volume of these microcavities promises to lead to a wide range of applications in microlasers, atom optics, quantum information, biophotonics and single molecule detection.
△ Less
Submitted 23 January, 2004; v1 submitted 22 January, 2004;
originally announced January 2004.