Showing 1–35 of 35 results for author: Kraft, M

Lindblad quantum dynamics from correlation functions of classical spin chains

Authors: Markus Kraft, Mariel Kempa, Jiaozi Wang, Robin Steinigeweg

Abstract: The Lindblad quantum master equation is one of the central approaches to the physics of open quantum systems. In particular, boundary driving enables the study of transport, where a steady state emerges in the long-time limit, which features a constant current and a characteristic density profile. While the Lindblad equation complements other approaches to transport in closed quantum systems, it h… ▽ More The Lindblad quantum master equation is one of the central approaches to the physics of open quantum systems. In particular, boundary driving enables the study of transport, where a steady state emerges in the long-time limit, which features a constant current and a characteristic density profile. While the Lindblad equation complements other approaches to transport in closed quantum systems, it has become clear that a connection between closed and open systems exists in certain cases. Here, we build on this connection for magnetization transport in the spin-1/2 XXZ chain with and without integrability-breaking perturbations. Specifically, we show that the time evolution of the open quantum system can be described on the basis of classical correlation functions, as generated by the Hamiltonian equations of motion for real vectors. By comparing to exact numerical simulations of the Lindblad equation, we demonstrate the accuracy of this description for a range of model parameters, but also point out counterexamples. While this agreement is an interesting physical observation, it also suggests that classical mechanics can be used to solve the Lindblad equation for comparatively large system sizes, which lie outside the possibilities of a quantum mechanical treatment. △ Less

Submitted 18 June, 2024; originally announced June 2024.

Comments: 11 pages, 10 figures

Deep learning empowered sensor fusion to improve infant movement classification

Authors: Tomas Kulvicius, Dajie Zhang, Luise Poustka, Sven Bölte, Lennart Jahn, Sarah Flügge, Marc Kraft, Markus Zweckstetter, Karin Nielsen-Saines, Florentin Wörgötter, Peter B Marschik

Abstract: There is a recent boom in the development of AI solutions to facilitate and enhance diagnostic procedures for established clinical tools. To assess the integrity of the developing nervous system, the Prechtl general movement assessment (GMA) is recognized for its clinical value in diagnosing neurological impairments in early infancy. GMA has been increasingly augmented through machine learning app… ▽ More There is a recent boom in the development of AI solutions to facilitate and enhance diagnostic procedures for established clinical tools. To assess the integrity of the developing nervous system, the Prechtl general movement assessment (GMA) is recognized for its clinical value in diagnosing neurological impairments in early infancy. GMA has been increasingly augmented through machine learning approaches intending to scale-up its application, circumvent costs in the training of human assessors and further standardize classification of spontaneous motor patterns. Available deep learning tools, all of which are based on single sensor modalities, are however still considerably inferior to that of well-trained human assessors. These approaches are hardly comparable as all models are designed, trained and evaluated on proprietary/silo-data sets. With this study we propose a sensor fusion approach for assessing fidgety movements (FMs) comparing three different sensor modalities (pressure, inertial, and visual sensors). Various combinations and two sensor fusion approaches (late and early fusion) for infant movement classification were tested to evaluate whether a multi-sensor system outperforms single modality assessments. The performance of the three-sensor fusion (classification accuracy of 94.5\%) was significantly higher than that of any single modality evaluated, suggesting the sensor fusion approach is a promising avenue for automated classification of infant motor patterns. The development of a robust sensor fusion system may significantly enhance AI-based early recognition of neurofunctions, ultimately facilitating automated early detection of neurodevelopmental conditions. △ Less

Submitted 21 June, 2024; v1 submitted 13 June, 2024; originally announced June 2024.

Lindblad dynamics from spatio-temporal correlation functions in nonintegrable spin-1/2 chains with different boundary conditions

Authors: Markus Kraft, Jonas Richter, Fengping Jin, Sourav Nandy, Jacek Herbrych, Kristel Michielsen, Hans De Raedt, Jochen Gemmer, Robin Steinigeweg

Abstract: We investigate the Lindblad equation in the context of boundary-driven magnetization transport in spin-$1/2$ chains. Our central question is whether the nonequilibrium steady state of the open system, including its buildup in time, can be described on the basis of the dynamics in the closed system. To this end, we rely on a previous work [Phys. Rev. B 108, L201119 (2023)], where a description in t… ▽ More We investigate the Lindblad equation in the context of boundary-driven magnetization transport in spin-$1/2$ chains. Our central question is whether the nonequilibrium steady state of the open system, including its buildup in time, can be described on the basis of the dynamics in the closed system. To this end, we rely on a previous work [Phys. Rev. B 108, L201119 (2023)], where a description in terms of spatio-temporal correlation functions has been suggested in the case of weak driving and small system-bath coupling. Because this work has focused on integrable systems and periodic boundary conditions, we here extend the analysis in three directions: We (i) consider nonintegrable systems, (ii) take into account open boundary conditions and other bath-coupling geometries, and (iii) provide a comparison to time-evolving block decimation. While we find that nonintegrability plays a minor role, the choice of the specific boundary conditions can be crucial, due to potentially nondecaying edge modes. Our large-scale numerical simulations suggest that a description based on closed-system correlation functions is an useful alternative to already existing state-of-the-art approaches. △ Less

Submitted 7 June, 2024; v1 submitted 28 February, 2024; originally announced February 2024.

Comments: 12 pages, 12 figures

Journal ref: Phys. Rev. Research 6, 023251 (2024)

Generative Large Language Models are autonomous practitioners of evidence-based medicine

Authors: Akhil Vaid, Joshua Lampert, Juhee Lee, Ashwin Sawant, Donald Apakama, Ankit Sakhuja, Ali Soroush, Denise Lee, Isotta Landi, Nicole Bussola, Ismail Nabeel, Robbie Freeman, Patricia Kovatch, Brendan Carr, Benjamin Glicksberg, Edgar Argulian, Stamatios Lerakis, Monica Kraft, Alexander Charney, Girish Nadkarni

Abstract: Background: Evidence-based medicine (EBM) is fundamental to modern clinical practice, requiring clinicians to continually update their knowledge and apply the best clinical evidence in patient care. The practice of EBM faces challenges due to rapid advancements in medical research, leading to information overload for clinicians. The integration of artificial intelligence (AI), specifically Generat… ▽ More Background: Evidence-based medicine (EBM) is fundamental to modern clinical practice, requiring clinicians to continually update their knowledge and apply the best clinical evidence in patient care. The practice of EBM faces challenges due to rapid advancements in medical research, leading to information overload for clinicians. The integration of artificial intelligence (AI), specifically Generative Large Language Models (LLMs), offers a promising solution towards managing this complexity. Methods: This study involved the curation of real-world clinical cases across various specialties, converting them into .json files for analysis. LLMs, including proprietary models like ChatGPT 3.5 and 4, Gemini Pro, and open-source models like LLaMA v2 and Mixtral-8x7B, were employed. These models were equipped with tools to retrieve information from case files and make clinical decisions similar to how clinicians must operate in the real world. Model performance was evaluated based on correctness of final answer, judicious use of tools, conformity to guidelines, and resistance to hallucinations. Results: GPT-4 was most capable of autonomous operation in a clinical setting, being generally more effective in ordering relevant investigations and conforming to clinical guidelines. Limitations were observed in terms of model ability to handle complex guidelines and diagnostic nuances. Retrieval Augmented Generation made recommendations more tailored to patients and healthcare systems. Conclusions: LLMs can be made to function as autonomous practitioners of evidence-based medicine. Their ability to utilize tooling can be harnessed to interact with the infrastructure of a real-world healthcare system and perform the tasks of patient management in a guideline directed manner. Prompt engineering may help to further enhance this potential and transform healthcare for the clinician and the patient. △ Less

Submitted 5 January, 2024; originally announced January 2024.

Comments: Word count: 4548 words, Figures: 4, Tables: 4

Recollapsing spacetimes with $Λ<0$

Authors: David Fajman, Maximilian Kraft

Abstract: We show that any homogeneous initial data set with $Λ<0$ on a product 3-manifold of the orthogonal form $(F\times \mathbb S^1,a_0^2dz^2+b_0^2σ^2,c_0dz^2+d_0σ)$, where $(F,σ)$ is a closed 2-surface of constant curvature and $a_0,..., d_0$ are suitable constants, recollapses under the Einstein-flow with a negative cosmological constant and forms crushing singularities at the big bang and the big cru… ▽ More We show that any homogeneous initial data set with $Λ<0$ on a product 3-manifold of the orthogonal form $(F\times \mathbb S^1,a_0^2dz^2+b_0^2σ^2,c_0dz^2+d_0σ)$, where $(F,σ)$ is a closed 2-surface of constant curvature and $a_0,..., d_0$ are suitable constants, recollapses under the Einstein-flow with a negative cosmological constant and forms crushing singularities at the big bang and the big crunch, respectively. Towards certain singularities among those the Kretschmann scalar remains bounded, hence these are not curvature singularities. We then show that the presence of a massless scalar field causes the Kretschmann scalar to blow-up towards both ends of spacetime for all solutions in the corresponding class. By standard arguments this recollapsing behaviour extends to an open neighborhood in the set of initial data sets and is in this sense generic close to the homogeneous regime. △ Less

Submitted 8 November, 2022; originally announced November 2022.

Comments: 28 pages, 3 figures

Infant movement classification through pressure distribution analysis

Authors: Tomas Kulvicius, Dajie Zhang, Karin Nielsen-Saines, Sven Bölte, Marc Kraft, Christa Einspieler, Luise Poustka, Florentin Wörgötter, Peter B Marschik

Abstract: Aiming at objective early detection of neuromotor disorders such as cerebral palsy, we proposed an innovative non-intrusive approach using a pressure sensing device to classify infant general movements (GMs). Here, we tested the feasibility of using pressure data to differentiate typical GM patterns of the ''fidgety period'' (i.e., fidgety movements) vs. the ''pre-fidgety period'' (i.e., writhing… ▽ More Aiming at objective early detection of neuromotor disorders such as cerebral palsy, we proposed an innovative non-intrusive approach using a pressure sensing device to classify infant general movements (GMs). Here, we tested the feasibility of using pressure data to differentiate typical GM patterns of the ''fidgety period'' (i.e., fidgety movements) vs. the ''pre-fidgety period'' (i.e., writhing movements). Participants (N = 45) were sampled from a typically-developing infant cohort. Multi-modal sensor data, including pressure data from a 32x32-grid pressure sensing mat with 1024 sensors, were prospectively recorded for each infant in seven succeeding laboratory sessions in biweekly intervals from 4-16 weeks of post-term age. For proof-of-concept, 1776 pressure data snippets, each 5s long, from the two targeted age periods were taken for movement classification. Each snippet was pre-annotated based on corresponding synchronised video data by human assessors as either fidgety present (FM+) or absent (FM-). Multiple neural network architectures were tested to distinguish the FM+ vs. FM- classes, including support vector machines (SVM), feed-forward networks (FFNs), convolutional neural networks (CNNs), and long short-term memory (LSTM) networks. The CNN achieved the highest average classification accuracy (81.4%) for classes FM+ vs. FM-. Comparing the pros and cons of other methods aiming at automated GMA to the pressure sensing approach, we concluded that the pressure sensing approach has great potential for efficient large-scale motion data acquisition and sharing. This will in return enable improvement of the approach that may prove scalable for daily clinical application for evaluating infant neuromotor functions. △ Less

Submitted 1 July, 2023; v1 submitted 26 July, 2022; originally announced August 2022.

Vehicle Guidance and Tracking Systems

Authors: Ryan Baker, John Garvey, Mitchell Kraft, Manoj Mathews, Kieran O Connor, Matthew Wolf

Abstract: Our application of command and control is the Aegis Combat System. Major components of this system include missile guidance and missile tracking. To look further into some of the aspects of these systems, an extremely simplified model of the Aegis Combat System will be designed. In this simplified model, a small-scale car will autonomously follow a small-scale remote-controlled car. There will be… ▽ More Our application of command and control is the Aegis Combat System. Major components of this system include missile guidance and missile tracking. To look further into some of the aspects of these systems, an extremely simplified model of the Aegis Combat System will be designed. In this simplified model, a small-scale car will autonomously follow a small-scale remote-controlled car. There will be three major components of this system: the controller and the two small-scale cars. Through this model, the team can demonstrate the real-world application of certain aspects of C2 such as command, communication, and sensor data fusion. Figure 1 shows a picture of the Aegis Combat System. △ Less

Submitted 24 May, 2022; originally announced May 2022.

Recommendations on test datasets for evaluating AI solutions in pathology

Authors: André Homeyer, Christian Geißler, Lars Ole Schwen, Falk Zakrzewski, Theodore Evans, Klaus Strohmenger, Max Westphal, Roman David Bülow, Michaela Kargl, Aray Karjauv, Isidre Munné-Bertran, Carl Orge Retzlaff, Adrià Romero-López, Tomasz Sołtysiński, Markus Plass, Rita Carvalho, Peter Steinbach, Yu-Chia Lan, Nassim Bouteldja, David Haber, Mateo Rojas-Carulla, Alireza Vafaei Sadr, Matthias Kraft, Daniel Krüger, Rutger Fick , et al. (5 additional authors not shown)

Abstract: Artificial intelligence (AI) solutions that automatically extract information from digital histology images have shown great promise for improving pathological diagnosis. Prior to routine use, it is important to evaluate their predictive performance and obtain regulatory approval. This assessment requires appropriate test datasets. However, compiling such datasets is challenging and specific recom… ▽ More Artificial intelligence (AI) solutions that automatically extract information from digital histology images have shown great promise for improving pathological diagnosis. Prior to routine use, it is important to evaluate their predictive performance and obtain regulatory approval. This assessment requires appropriate test datasets. However, compiling such datasets is challenging and specific recommendations are missing. A committee of various stakeholders, including commercial AI developers, pathologists, and researchers, discussed key aspects and conducted extensive literature reviews on test datasets in pathology. Here, we summarize the results and derive general recommendations for the collection of test datasets. We address several questions: Which and how many images are needed? How to deal with low-prevalence subsets? How can potential bias be detected? How should datasets be reported? What are the regulatory requirements in different countries? The recommendations are intended to help AI developers demonstrate the utility of their products and to help regulatory agencies and end users verify reported performance measures. Further research is needed to formulate criteria for sufficiently representative test datasets so that AI solutions can operate with less user intervention and better support diagnostic workflows in the future. △ Less

Submitted 21 April, 2022; originally announced April 2022.

Journal ref: Mod Pathol (2022)

Designs for programmable quantum resistance standards based on epitaxial graphene p-n junctions

Authors: Jiuning Hu, Albert F. Rigosi, Mattias Kruskopf, Yanfei Yang, Bi-Yi Wu, Jifa Tian, Alireza R. Panna, Hsin-Yen Lee, Shamith U. Payagala, George R. Jones, Marlin E. Kraft, Dean G. Jarrett, Kenji Watanabe, Takashi Taniguchi, Randolph E. Elmquist, David B. Newell

Abstract: We report the fabrication and measurement of top gated epitaxial graphene p-n junctions where exfoliated hexagonal boron nitride (h-BN) is used as the gate dielectric. The four-terminal longitudinal resistance across a single junction is well quantized at the von Klitzing constant R_K with a relative uncertainty of 10-7. After the exploration of numerous parameter spaces, we summarize the conditio… ▽ More We report the fabrication and measurement of top gated epitaxial graphene p-n junctions where exfoliated hexagonal boron nitride (h-BN) is used as the gate dielectric. The four-terminal longitudinal resistance across a single junction is well quantized at the von Klitzing constant R_K with a relative uncertainty of 10-7. After the exploration of numerous parameter spaces, we summarize the conditions upon which these devices could function as potential resistance standards. Furthermore, we offer designs of programmable electrical resistance standards over six orders of magnitude by using external gating. △ Less

Submitted 10 January, 2022; originally announced January 2022.

Hidden symmetries in plasmonic gratings

Authors: P. A. Huidobro, Y. H. Chang, M. Kraft, J. B. Pendry

Abstract: Plasmonic gratings constitute a paradigmatic instance of the wide range of applications enabled by plasmonics. While subwavelength metal gratings find applications in optical biosensing and photovoltaics, atomically thin gratings achieved by periodically doping a graphene monolayer perform as metasurfaces for the control of terahertz radiation. In this paper we show how these two instances of plas… ▽ More Plasmonic gratings constitute a paradigmatic instance of the wide range of applications enabled by plasmonics. While subwavelength metal gratings find applications in optical biosensing and photovoltaics, atomically thin gratings achieved by periodically doping a graphene monolayer perform as metasurfaces for the control of terahertz radiation. In this paper we show how these two instances of plasmonic gratings inherit their spectral properties from an underlying slab with translational symmetry.We develop an analytical formalism to accurately derive the mode spectrum of the gratings that provides a great physical insight. △ Less

Submitted 23 October, 2018; originally announced October 2018.

Journal ref: Physical Review B 95 (15), 155401 (2017)

Unraveling Mirror Properties in Time-Delayed Quantum Feedback Scenarios

Authors: Fabian M. Faulstich, Manuel Kraft, Alexander Carmele

Abstract: We derive in the Heisenberg picture a widely used phenomenological coupling element to treat feedback effects in quantum optical platforms. Our derivation is based on a microscopic Hamiltonian, which describes the mirror-emitter dynamics based on a dielectric, a mediating fully quantized electromagnetic field, and a single two-level system in front of the dielectric. The dielectric is modeled as a… ▽ More We derive in the Heisenberg picture a widely used phenomenological coupling element to treat feedback effects in quantum optical platforms. Our derivation is based on a microscopic Hamiltonian, which describes the mirror-emitter dynamics based on a dielectric, a mediating fully quantized electromagnetic field, and a single two-level system in front of the dielectric. The dielectric is modeled as a a system of identical two-state atoms. The Heisenberg equation yields a system of describing differential operator equations, which we solve in the Weisskopf-Wigner limit. Due to a finite round-trip time between emitter and dielectric, we yield delay differential operator equations. Our derivation motivates and justifies the typical phenomenological assumed coupling element and allows, furthermore, a generalization to a variety of mirrors, such as dissipative mirrors or mirrors with gain dynamics. △ Less

Submitted 7 September, 2017; v1 submitted 17 March, 2017; originally announced March 2017.

Multiple Charge Density Wave States at the Surface of TbTe$_3$

Authors: Ling Fu, Aaron M. Kraft, Bishnu Sharma, Manoj Singh, Philip Walmsley, Ian R. Fisher, Michael C. Boyer

Abstract: We studied TbTe$_{3}$ using scanning tunneling microscopy (STM) in the temperature range of 298 - 355 K. As seen in previous STM measurements on RTe$_{3}$ compounds, our measurements detect a unidirectional charge density wave state (CDW) in the surface Te-layer with a wavevector consistent with that of the bulk, q$_{cdw}$ = 0.30 $\pm$ 0.01c$^{*}$. However, unlike previous STM measurements, and di… ▽ More We studied TbTe$_{3}$ using scanning tunneling microscopy (STM) in the temperature range of 298 - 355 K. As seen in previous STM measurements on RTe$_{3}$ compounds, our measurements detect a unidirectional charge density wave state (CDW) in the surface Te-layer with a wavevector consistent with that of the bulk, q$_{cdw}$ = 0.30 $\pm$ 0.01c$^{*}$. However, unlike previous STM measurements, and differing from measurements probing the bulk, we detect two perpendicular orientations for the unidirectional CDWs with no directional preference for the in-plane crystal axes (a- or c-axis) and no noticeable difference in wavevector magnitude. In addition, we find regions in which the bidirectional CDW states coexist. We propose that observation of two CDW states indicates a decoupling of the surface Te-layer from the rare-earth block layer below, and that strain variations in the Te surface layer drive the local CDW direction to the specific unidirectional or, in rare occurrences, bidirectional CDW orders observed. This indicates that similar driving mechanisms for CDW formation in the bulk, where anisotropic lattice strain energy is important, are at play at the surface. In our bias-dependent measurements, we find no contrast inversion for the CDW state between occupied and empty states. This finding differs from other quasi 2-dimensional materials containing a hidden 1-dimensional character which leads to a favorable Fermi surface nesting scenario. Our temperature-dependent measurements provide evidence for localized CDW formation above the bulk transition temperature, T$_{cdw}$. △ Less

Submitted 26 July, 2016; originally announced July 2016.

Journal ref: Phys. Rev. B 94, 205101 (2016)

Transformation optics: a time- and frequency-domain analysis of electron-energy loss spectroscopy

Authors: Matthias Kraft, Yu Luo, J. B. Pendry

Abstract: Electron energy loss spectroscopy (EELS) and Cathodoluminescence (CL) play a pivotal role in many of the cutting edge experiments in plasmonics. EELS and CL experiments are usually supported by numerical simulations, which, whilst accurate, may not provide as much physical insight as analytical calculations do. Fully analytical solutions to EELS and CL systems in plasmonics are rare and difficult… ▽ More Electron energy loss spectroscopy (EELS) and Cathodoluminescence (CL) play a pivotal role in many of the cutting edge experiments in plasmonics. EELS and CL experiments are usually supported by numerical simulations, which, whilst accurate, may not provide as much physical insight as analytical calculations do. Fully analytical solutions to EELS and CL systems in plasmonics are rare and difficult to obtain. This paper aims to narrow this gap by introducing a new method based on Transformation optics that allows to calculate the quasi-static frequency and time-domain response of plasmonic particles under electron beam excitation. △ Less

Submitted 30 May, 2016; originally announced May 2016.

Harnessing transformation optics for understanding electron energy loss and cathodoluminescence

Authors: Yu Luo, Matthias Kraft, J. B. Pendry

Abstract: As the continual experimental advances made in Electron energy loss spectroscopy (EELS) and cathodoluminescence (CL) open the door to practical exploitations of plasmonic effects in metal nanoparticles, there is an increasing need for precise interpretation and guidance of such experiments. Numerical simulations are available but lack physical insight, while traditional analytical approaches are r… ▽ More As the continual experimental advances made in Electron energy loss spectroscopy (EELS) and cathodoluminescence (CL) open the door to practical exploitations of plasmonic effects in metal nanoparticles, there is an increasing need for precise interpretation and guidance of such experiments. Numerical simulations are available but lack physical insight, while traditional analytical approaches are rare and limited to studying specific, simple structures. Here, we propose a versatile and efficient method based on transformation optics which can fully characterize and model the EELS problems of nanoparticles of complex geometries. Detailed discussions are given on 2D and 3D nanoparticle dimers, where the frequency and time domain responses under electron beam excitations are derived. △ Less

Submitted 30 May, 2016; originally announced May 2016.

Bianisotropy and magnetism in plasmonic gratings

Authors: Matthias Kraft, Avi Braun, Yu Luo, S. A. Maier, J. B. Pendry

Abstract: We present a simple design to achieve bianisotropy at visible wavelengths: an ultrathin plasmonic grating made of a gold grating covered by a thin flat layer of gold. We show experimentally and through simulations that the grating exhibits magneto-electric coupling and features asymmetric reflection and absorption, all that with a device thickness of a tenth of the operating wavelength. We compare… ▽ More We present a simple design to achieve bianisotropy at visible wavelengths: an ultrathin plasmonic grating made of a gold grating covered by a thin flat layer of gold. We show experimentally and through simulations that the grating exhibits magneto-electric coupling and features asymmetric reflection and absorption, all that with a device thickness of a tenth of the operating wavelength. We compared the spectral results and retrieved the effective material parameters of different polarizations and devices. We show that both asymmetry and strong coupling between the incoming light and the optically interacting surfaces are required for obtaining asymmetric optical behavior in metasurfaces. △ Less

Submitted 8 April, 2016; originally announced April 2016.

Time-delayed quantum coherent Pyragas feedback control of photon squeezing in a degenerate parametric oscillator

Authors: Manuel Kraft, Sven Moritz Hein, Judith Lehnert, Eckehard Schöll, Stephen Hughes, Andreas Knorr

Abstract: Quantum coherent feedback control is a measurement-free control method fully preserving quantum coherence. In this paper we show how time-delayed quantum coherent feedback can be used to control the degree of squeezing in the output field of a cavity containing a degenerate parametric oscillator. We focus on the specific situation of Pyragas-type feedback control where time-delayed signals are fed… ▽ More Quantum coherent feedback control is a measurement-free control method fully preserving quantum coherence. In this paper we show how time-delayed quantum coherent feedback can be used to control the degree of squeezing in the output field of a cavity containing a degenerate parametric oscillator. We focus on the specific situation of Pyragas-type feedback control where time-delayed signals are fed back directly into the quantum system. Our results show how time-delayed feedback can enhance or decrease the degree of squeezing as a function of time delay and feedback strength. △ Less

Submitted 23 March, 2016; originally announced March 2016.

Comments: 12 pages, 6 figures

Journal ref: Phys. Rev. A 94, 023806 (2016)

Graphene, plasmons and transformation optics

Authors: Paloma A. Huidobro, Matthias Kraft, Ren Kun, Stefan A. Maier, John B. Pendry

Abstract: Here we study subwavelength gratings for coupling into graphene plasmons by means of an an- alytical model based on transformation optics that is not limited to very shallow gratings. We consider gratings that consist of a periodic modulation of the charge density in the graphene sheet, and gratings formed by this conductivity modulation together with a dielectric grating placed in close vicinity… ▽ More Here we study subwavelength gratings for coupling into graphene plasmons by means of an an- alytical model based on transformation optics that is not limited to very shallow gratings. We consider gratings that consist of a periodic modulation of the charge density in the graphene sheet, and gratings formed by this conductivity modulation together with a dielectric grating placed in close vicinity of the graphene. Explicit expressions for the dispersion relation of the plasmon po- laritons supported by the system, and reflectance and transmittance under plane wave illumination are given. We discuss the conditions for maximising the coupling between incident radiation and plasmons in the graphene, finding the optimal modulation strength for a conductivity grating. △ Less

Submitted 22 February, 2016; originally announced February 2016.

Comments: Accepted for Journal of Optics, special issue on Transformation Optics, in November 2015

Origin of a Superlattice Observed in Li$_{0.9}$Mo$_{6}$O$_{17}$ by Scanning Tunneling Microscopy

Authors: Ling Fu, Aaron M. Kraft, Martha Greenblatt, M. C. Boyer

Abstract: We use scanning tunneling microscopy to study the lithium purple bronze (Li$_{0.9}$Mo$_{6}$O$_{17}$) at room temperature. Our measurements allow us to identify the single-crystal cleave plane and show that it is possible to obtain clean cleaved surfaces reflecting the crystal structure without the complications of nanoscale surface disorder. In addition to the crystal lattice, we observe a coexist… ▽ More We use scanning tunneling microscopy to study the lithium purple bronze (Li$_{0.9}$Mo$_{6}$O$_{17}$) at room temperature. Our measurements allow us to identify the single-crystal cleave plane and show that it is possible to obtain clean cleaved surfaces reflecting the crystal structure without the complications of nanoscale surface disorder. In addition to the crystal lattice, we observe a coexisting discommensurate superlattice with wavevectors q = 0.5a* $\pm$ 0.25b*. We propose that the origin of the superstructure is a surface reconstruction which is driven by cleaving along a crystal plane which contains in-plane MoO$_{4}$ tetrahedra connected to out-of-plane MoO$_{6}$ octahedra through corner-sharing oxygens. When combined with spectroscopic measurements, our studies show a promising avenue through which to study the complex physics within Li$_{0.9}$Mo$_{6}$O$_{17}$. △ Less

Submitted 12 August, 2015; originally announced August 2015.

Comments: 14 pages, 4 figures

Well-balanced finite volume evolution Galerkin methods for the shallow water equations

Authors: Maria Lukáčová - Medvidová, Sebastian Noelle, Marcus Kraft

Abstract: We present a new well-balanced finite volume method within the framework of the finite volume evolution Galerkin (FVEG) schemes. The methodology will be illustrated for the shallow water equations with source terms modelling the bottom topography and Coriolis forces. Results can be generalized to more complex systems of balance laws. The FVEG methods couple a finite volume formulation with approxi… ▽ More We present a new well-balanced finite volume method within the framework of the finite volume evolution Galerkin (FVEG) schemes. The methodology will be illustrated for the shallow water equations with source terms modelling the bottom topography and Coriolis forces. Results can be generalized to more complex systems of balance laws. The FVEG methods couple a finite volume formulation with approximate evolution operators. The latter are constructed using the bicharacteristics of multidimensional hyperbolic systems, such that all of the infinitely many directions of wave propagation are taken into account explicitly. We derive a well- balanced approximation of the integral equations and prove that the FVEG scheme is well-balanced for the stationary steady states as well as for the steady jets in the rotational frame. Several numerical experiments for stationary and quasi-stationary states as well as for steady jets confirm the reliability of the well-balanced FVEG scheme. △ Less

Submitted 15 January, 2015; originally announced January 2015.

Report number: IGPM report 259, RWTH Aachen University

Journal ref: Journal of Computational Physics, Vol. 221 (2007), 122-147

SAP Speaks PDDL: Exploiting a Software-Engineering Model for Planning in Business Process Management

Authors: Joerg Hoffman, Ingo Weber, Frank Michael Kraft

Abstract: Planning is concerned with the automated solution of action sequencing problems described in declarative languages giving the action preconditions and effects. One important application area for such technology is the creation of new processes in Business Process Management (BPM), which is essential in an ever more dynamic business environment. A major obstacle for the application of Planning in t… ▽ More Planning is concerned with the automated solution of action sequencing problems described in declarative languages giving the action preconditions and effects. One important application area for such technology is the creation of new processes in Business Process Management (BPM), which is essential in an ever more dynamic business environment. A major obstacle for the application of Planning in this area lies in the modeling. Obtaining a suitable model to plan with -- ideally a description in PDDL, the most commonly used planning language -- is often prohibitively complicated and/or costly. Our core observation in this work is that this problem can be ameliorated by leveraging synergies with model-based software development. Our application at SAP, one of the leading vendors of enterprise software, demonstrates that even one-to-one model re-use is possible. The model in question is called Status and Action Management (SAM). It describes the behavior of Business Objects (BO), i.e., large-scale data structures, at a level of abstraction corresponding to the language of business experts. SAM covers more than 400 kinds of BOs, each of which is described in terms of a set of status variables and how their values are required for, and affected by, processing steps (actions) that are atomic from a business perspective. SAM was developed by SAP as part of a major model-based software engineering effort. We show herein that one can use this same model for planning, thus obtaining a BPM planning application that incurs no modeling overhead at all. We compile SAM into a variant of PDDL, and adapt an off-the-shelf planner to solve this kind of problem. Thanks to the resulting technology, business experts may create new processes simply by specifying the desired behavior in terms of status variable value changes: effectively, by describing the process in their own language. △ Less

Submitted 22 January, 2014; originally announced January 2014.

Journal ref: Journal Of Artificial Intelligence Research, Volume 44, pages 587-632, 2012

Improved surface quality of anisotropically etched silicon {111} planes for mm-scale integrated optics

Authors: J. P. Cotter, I. Zeimpekis, M Kraft, E A Hinds

Abstract: We have studied the surface quality of millimeter-scale optical mirrors produced by etching CZ and FZ silicon wafers in potassium hydroxide to expose the $\{111\}$ planes. We find that the FZ surfaces have four times lower noise power at spatial frequencies up to $500\, {mm}^{-1}$. We conclude that mirrors made using FZ wafers have higher optical quality. We have studied the surface quality of millimeter-scale optical mirrors produced by etching CZ and FZ silicon wafers in potassium hydroxide to expose the $\{111\}$ planes. We find that the FZ surfaces have four times lower noise power at spatial frequencies up to $500\, {mm}^{-1}$. We conclude that mirrors made using FZ wafers have higher optical quality. △ Less

Submitted 15 July, 2013; originally announced July 2013.

Journal ref: J. Micromech. Microeng. 23 117006 (2013)

Landau-Zener transitions in the presence of harmonic noise

Authors: Matthias Kraft, Stephan Burkhardt, Riccardo Mannella, Sandro Wimberger

Abstract: We study the influence of off-diagonal harmonic noise on transitions in a Landau-Zener model. We demonstrate that the harmonic noise can change the transition probabilities substantially and that its impact depends strongly on the characteristic frequency of the noise. In the underdamped regime of the noise process, its effect is compared with the one of a deterministic sinusoidally oscillating fu… ▽ More We study the influence of off-diagonal harmonic noise on transitions in a Landau-Zener model. We demonstrate that the harmonic noise can change the transition probabilities substantially and that its impact depends strongly on the characteristic frequency of the noise. In the underdamped regime of the noise process, its effect is compared with the one of a deterministic sinusoidally oscillating function. While altering the properties of the noise process allows one to engineer the transitions probabilities, driving the system with a deterministic sinusoidal function can result in larger and more controlled changes of the transition probability. This may be relevant for realistic implementations of our model with Bose-Einstein condensates in noise-driven optical lattices. △ Less

Submitted 7 March, 2013; originally announced March 2013.

Journal ref: Fluct. Noise Lett. 12, 1340005 (2013)

Two-dimensional ion trap lattice on a microchip

Authors: R. C. Sterling, H. Rattanasonti, S. Weidt, K. Lake, P. Srinivasan, S. C. Webster, M. Kraft, W. K. Hensinger

Abstract: Microfabricated ion traps are a major advancement towards scalable quantum computing with trapped ions. The development of more versatile ion-trap designs, in which tailored arrays of ions are positioned in two dimensions above a microfabricated surface, would lead to applications in fields as varied as quantum simulation, metrology and atom-ion interactions. Current surface ion traps often have l… ▽ More Microfabricated ion traps are a major advancement towards scalable quantum computing with trapped ions. The development of more versatile ion-trap designs, in which tailored arrays of ions are positioned in two dimensions above a microfabricated surface, would lead to applications in fields as varied as quantum simulation, metrology and atom-ion interactions. Current surface ion traps often have low trap depths and high heating rates, due to the size of the voltages that can be applied to them, limiting the fidelity of quantum gates. Here we report on a fabrication process that allows for the application of very high voltages to microfabricated devices in general and use this advance to fabricate a 2D ion trap lattice on a microchip. Our microfabricated architecture allows for reliable trapping of 2D ion lattices, long ion lifetimes, rudimentary shuttling between lattice sites and the ability to deterministically introduce defects into the ion lattice. △ Less

Submitted 25 April, 2014; v1 submitted 15 February, 2013; originally announced February 2013.

Journal ref: Nat. Commun. 5:3637 (2014)

Noise assisted transport in the Wannier-Stark system

Authors: Stephan Burkhardt, Matthias Kraft, Riccardo Mannella, Sandro Wimberger

Abstract: We investigated how the presence of an additional lattice potential, driven by a harmonic noise process, changes the transition rate from the ground band to the first excited band in a Wannier-Stark system. Alongside numerical simulations, we present two models that capture the essential features of the dynamics. The first model uses a noise-driven Landau-Zener approximation and describes the shor… ▽ More We investigated how the presence of an additional lattice potential, driven by a harmonic noise process, changes the transition rate from the ground band to the first excited band in a Wannier-Stark system. Alongside numerical simulations, we present two models that capture the essential features of the dynamics. The first model uses a noise-driven Landau-Zener approximation and describes the short time evolution of the full system very well. The second model assumes that the noise process' correlation time is much larger than the internal timescale of the system, yet it allows for good estimates of the observed transition rates and gives a simple interpretation of the dynamics. One of the central results is that we obtain a way to control the interband transitions with the help of the second lattice. This could readily be realized in state-of-the-art experiments using either Bose-Einstein condensates or optical pulses in engineered potentials. △ Less

Submitted 6 February, 2013; originally announced February 2013.

Journal ref: New J. Phys. 15 045008 (2013)

ICP polishing of silicon for high quality optical resonators on a chip

Authors: A. Laliotis, M. Trupke, J. P. Cotter, G. Lewis, M. Kraft, E. A. Hinds

Abstract: Miniature concave hollows, made by wet etching silicon through a circular mask, can be used as mirror substrates for building optical micro-cavities on a chip. In this paper we investigate how ICP polishing improves both shape and roughness of the mirror substrates. We characterise the evolution of the surfaces during the ICP polishing using white-light optical profilometry and atomic force micros… ▽ More Miniature concave hollows, made by wet etching silicon through a circular mask, can be used as mirror substrates for building optical micro-cavities on a chip. In this paper we investigate how ICP polishing improves both shape and roughness of the mirror substrates. We characterise the evolution of the surfaces during the ICP polishing using white-light optical profilometry and atomic force microscopy. A surface roughness of 1 nm is reached, which reduces to 0.5 nm after coating with a high reflectivity dielectric. With such smooth mirrors, the optical cavity finesse is now limited by the shape of the underlying mirror. △ Less

Submitted 28 August, 2012; originally announced August 2012.

Journal ref: J. Micromech. Microeng. 22 125011 (2012)

Atom chip for BEC interferometry

Authors: R. J. Sewell, J. Dingjan, F. Baumgartner, I. Llorente-Garcia, S. Eriksson, E. A. Hinds, G. Lewis, P. Srinivasan, Z. Moktadir, C. O. Gollasch, M. Kraft

Abstract: We have fabricated and tested an atom chip that operates as a matter wave interferometer. In this communication we describe the fabrication of the chip by ion-beam milling of gold evaporated onto a silicon substrate. We present data on the quality of the wires, on the current density that can be reached in the wires and on the smoothness of the magnetic traps that are formed. We demonstrate the… ▽ More We have fabricated and tested an atom chip that operates as a matter wave interferometer. In this communication we describe the fabrication of the chip by ion-beam milling of gold evaporated onto a silicon substrate. We present data on the quality of the wires, on the current density that can be reached in the wires and on the smoothness of the magnetic traps that are formed. We demonstrate the operation of the interferometer, showing that we can coherently split and recombine a Bose-Einstein condensate with good phase stability. △ Less

Submitted 3 February, 2010; v1 submitted 23 October, 2009; originally announced October 2009.

Comments: 9 pages, 5 figures

Journal ref: J. Phys. B: At. Mol. Opt. Phys. 43 (2010) 051003

A Stochastic Algorithm for Parametric Sensitivity in Smoluchowski's Coagulation Equation

Authors: I. Bailleul, P. L. W. Man, M. Kraft

Abstract: In this article a stochastic particle system approximation to the parametric sensitivity in the Smoluchowski coagulation equation is introduced. The parametric sensitivity is the derivative of the solution to the equation with respect to some parameter, where the coagulation kernel depends on this parameter. It is proved that the particle system converges weakly to the sensitivity as the number… ▽ More In this article a stochastic particle system approximation to the parametric sensitivity in the Smoluchowski coagulation equation is introduced. The parametric sensitivity is the derivative of the solution to the equation with respect to some parameter, where the coagulation kernel depends on this parameter. It is proved that the particle system converges weakly to the sensitivity as the number of particles N increases. A Monte Carlo algorithm is developed and variance reduction techniques are applied. Numerical experiments are conducted for two kernels: the additive kernel and one which has been used for studying soot formation in a free molecular regime. It is shown empirically that the techniques for variance reduction are indeed very effective and that the order of convergence is O(1/N). The algorithm is then compared to an algorithm based on a finite difference approximation to the sensitivity and it is found that the variance of the sensitivity estimators are considerably lower than that for the finite difference approach. Furthermore, two methods of establishing `efficiency' are considered and the new algorithm is found to be significantly more efficient. △ Less

Submitted 21 October, 2009; originally announced October 2009.

Comments: 23 pages

MSC Class: 65C05; 65C35; 68U20; 82C22; 60F05

Coupling algorithm for calculating sensitivities of Smoluchowski's coagulation equation

Authors: Peter L. W. Man, James R. Norris, Ismael F. Bailleul, Markus Kraft

Abstract: In this paper, two new stochastic algorithms for calculating parametric derivatives of the solution to the Smoluchowski coagulation equation are presented. It is assumed that the coagulation kernel is dependent on these parameters. The new algorithms (called `Single' and `Double') work by coupling two Marcus-Lushnikov processes in such a way as to reduce the difference between their trajectories… ▽ More In this paper, two new stochastic algorithms for calculating parametric derivatives of the solution to the Smoluchowski coagulation equation are presented. It is assumed that the coagulation kernel is dependent on these parameters. The new algorithms (called `Single' and `Double') work by coupling two Marcus-Lushnikov processes in such a way as to reduce the difference between their trajectories, thereby significantly reducing the variance of central difference estimators of the parametric derivatives. In the numerical results, the algorithms are shown have have a O(1/N) order of convergence as expected, where N is the initial number of particles. It was also found that the Single and Double algorithms provide much smaller variances. Furthermore, a method for establishing `efficiency' is considered, which takes into account the variances as well as CPU run times, and the `Double' is significantly more `efficient' compared to the `Independent' algorithm in most cases. △ Less

Submitted 20 October, 2009; originally announced October 2009.

Comments: 21 pages,

Fabrication of Magneto-Optical Atom Traps on a Chip

Authors: G. Lewis, Z. Moktadir, C. Gollasch, M. Kraft, S. Pollock, F. Ramirez-Martinez, J. P. Ashmore, A. Laliotis, M. Trupke, E. A. Hinds

Abstract: Ultra-cold atoms can be manipulated using microfabricated devices known as atom chips. These have significant potential for applications in sensing, metrology and quantum information processing. To date, the chips are loaded by transfer of atoms from an external, macroscopic magneto-optical trap (MOT) into microscopic traps on the chip. This transfer involves a series of steps, which complicate… ▽ More Ultra-cold atoms can be manipulated using microfabricated devices known as atom chips. These have significant potential for applications in sensing, metrology and quantum information processing. To date, the chips are loaded by transfer of atoms from an external, macroscopic magneto-optical trap (MOT) into microscopic traps on the chip. This transfer involves a series of steps, which complicate the experimental procedure and lead to atom losses. In this paper we present a design for integrating a MOT into a silicon wafer by combining a concave pyramidal mirror with a square wire loop. We describe how an array of such traps has been fabricated and we present magnetic, thermal and optical properties of the chip. △ Less

Submitted 29 April, 2008; originally announced April 2008.

Scaling properties of pyrex and silicon surfaces blasted with sharp particles

Authors: Z. Moktadir, H. Wensink, M. Kraft

Abstract: The blasting of brittle materials with sharp particles is an important fabrication technology in many industrial processes. In particular, for micro-systems, it allows the production of devices with feature sizes down to few tens of microns. An important parameter of this process is the surface roughness of post-blasted surfaces. In this work the scaling properties of Pyrex glass and silicon sur… ▽ More The blasting of brittle materials with sharp particles is an important fabrication technology in many industrial processes. In particular, for micro-systems, it allows the production of devices with feature sizes down to few tens of microns. An important parameter of this process is the surface roughness of post-blasted surfaces. In this work the scaling properties of Pyrex glass and silicon surfaces after bombardment with alumina particles is investigated. The targets were bombarded at normal incidence using alumina particles with two different average sizes, $29μm$ and $9μm$, respectively. This investigation indicates that the resulting surfaces have multifractal properties. Applying multifractal detrended fluctuation analysis (MFDFA) allowed us to determine the singularity spectrum of the surfaces. This spectrum did not depend on the target material or on the size of the particles. Several parameters quantifying relevant quantities were determined. We argue that for scales below $5 μm$, fracture processes are dominant while at large scales long range correlations are responsible for the multifractal behaviour. △ Less

Submitted 26 April, 2007; originally announced April 2007.

The effect of self-affine fractal roughness of wires on atom chips

Authors: Z. Moktadir, B. Darquié, M. Kraft, E. A. Hinds

Abstract: Atom chips use current flowing in lithographically patterned wires to produce microscopic magnetic traps for atoms. The density distribution of a trapped cold atom cloud reveals disorder in the trapping potential, which results from meandering current flow in the wire. Roughness in the edges of the wire is usually the main cause of this behaviour. Here, we point out that the edges of microfabric… ▽ More Atom chips use current flowing in lithographically patterned wires to produce microscopic magnetic traps for atoms. The density distribution of a trapped cold atom cloud reveals disorder in the trapping potential, which results from meandering current flow in the wire. Roughness in the edges of the wire is usually the main cause of this behaviour. Here, we point out that the edges of microfabricated wires normally exhibit self-affine roughness. We investigate the consequences of this for disorder in atom traps. In particular, we consider how closely the trap can approach the wire when there is a maximum allowable strength of the disorder. We comment on the role of roughness in future atom--surface interaction experiments. △ Less

Submitted 14 March, 2007; originally announced March 2007.

Comments: 7 pages, 7 figures

Journal ref: J. Mod. Opt. 54, 2149 (2007)

Pyramidal micro-mirrors for microsystems and atom chips

Authors: M. Trupke, F. Ramirez-Martinez, E. A. Curtis, J. P. Ashmore, S. Eriksson, E. A. Hinds, Z. Moktadir, C. Gollasch, M. Kraft, G. Vijaya Prakash, J. J. Baumberg

Abstract: Concave pyramids are created in the (100) surface of a silicon wafer by anisotropic etching in potassium hydroxide. High quality micro-mirrors are then formed by sputtering gold onto the smooth silicon (111) faces of the pyramids. These mirrors show great promise as high quality optical devices suitable for integration into MOEMS and atom chips. We have shown that structures of this shape can be… ▽ More Concave pyramids are created in the (100) surface of a silicon wafer by anisotropic etching in potassium hydroxide. High quality micro-mirrors are then formed by sputtering gold onto the smooth silicon (111) faces of the pyramids. These mirrors show great promise as high quality optical devices suitable for integration into MOEMS and atom chips. We have shown that structures of this shape can be used to laser-cool and hold atoms in a magneto-optical trap. △ Less

Submitted 13 September, 2005; originally announced September 2005.

Comments: 4 pages, 5 figures

Microfabricated high-finesse optical cavity with open access and small volume

Authors: M. Trupke, E. A. Hinds, S. Eriksson, E. A. Curtis, Z. Moktadir, E. Kukharenka, M. Kraft

Abstract: We present a novel microfabricated optical cavity, which combines a very small mode volume with high finesse. In contrast to other micro-resonators, such as microspheres, the structure we have built gives atoms and molecules direct access to the high-intensity part of the field mode, enabling them to interact strongly with photons in the cavity for the purposes of detection and quantum-coherent… ▽ More We present a novel microfabricated optical cavity, which combines a very small mode volume with high finesse. In contrast to other micro-resonators, such as microspheres, the structure we have built gives atoms and molecules direct access to the high-intensity part of the field mode, enabling them to interact strongly with photons in the cavity for the purposes of detection and quantum-coherent manipulation. Light couples directly in and out of the resonator through an optical fibre, avoiding the need for sensitive coupling optics. This renders the cavity particularly attractive as a component of a lab-on-a-chip, and as a node in a quantum network. △ Less

Submitted 28 June, 2005; originally announced June 2005.

Comments: 3 pages, 3 figures

Integrated optical components on atom chips

Authors: S. Eriksson, M. Trupke, H. F. Powell, D. Sahagun, C. D. J. Sinclair, E. A. Curtis, B. E. Sauer, E. A. Hinds, Z. Moktadir, C. O. Gollasch, M. Kraft

Abstract: We report on the integration of small-scale optical components into silicon wafers for use in atom chips. We present an on-chip fibre-optic atom detection scheme that can probe clouds with small atom numbers. The fibres can also be used to generate microscopic dipole traps. We describe our most recent results with optical microcavities and show that single-atom detection can be realised on an at… ▽ More We report on the integration of small-scale optical components into silicon wafers for use in atom chips. We present an on-chip fibre-optic atom detection scheme that can probe clouds with small atom numbers. The fibres can also be used to generate microscopic dipole traps. We describe our most recent results with optical microcavities and show that single-atom detection can be realised on an atom chip. The key components have been fabricated by etching directly into the atom chip silicon substrate. △ Less

Submitted 7 February, 2005; originally announced February 2005.

Comments: 5 pages, 4 figures

Fabrication of micro-mirrors with pyramidal shape using anisotropic etching of silicon

Authors: Z. Moktadir, C. Gollasch, E. Koukharenko, M. Kraft, G. Vijaya Prakash, J. J. Baumberg, M. Trupke, S. Eriksson, E. A. Hinds

Abstract: Gold micro-mirrors have been formed in silicon in an inverted pyramidal shape. The pyramidal structures are created in the (100) surface of a silicon wafer by anisotropic etching in potassium hydroxide. High quality micro-mirrors are then formed by sputtering gold onto the smooth silicon (111) faces of the pyramids. These mirrors show great promise as high quality optical devices suitable for in… ▽ More Gold micro-mirrors have been formed in silicon in an inverted pyramidal shape. The pyramidal structures are created in the (100) surface of a silicon wafer by anisotropic etching in potassium hydroxide. High quality micro-mirrors are then formed by sputtering gold onto the smooth silicon (111) faces of the pyramids. These mirrors show great promise as high quality optical devices suitable for integration into MOEMS systems. △ Less

Submitted 2 September, 2004; originally announced September 2004.

Comments: 3 pages, 4 figures. Fig. 4 may not print correctly on some printers due to image compression