-
Hybridization and Dehybridization of Plasmonic Modes
Authors:
Artur Movsesyan,
Alina Muravitskaya,
Marion Castilla,
Sergei Kostcheev,
Julien Proust,
Jérôme Plain,
Anne-Laure Baudrion,
Rémi Vincent,
Pierre-Michel Adam
Abstract:
The plasmon resonances (modes) of a metal nanostructure can be defined as a dipole, a quadrupole, or high-order modes depending on the surface charge distribution induced by the incident field. In a non-symmetrical environment or clusters, the modes can hybridize and exhibit different behavior and properties. In this work, we study experimentally and numerically the substrate-induced hybridization…
▽ More
The plasmon resonances (modes) of a metal nanostructure can be defined as a dipole, a quadrupole, or high-order modes depending on the surface charge distribution induced by the incident field. In a non-symmetrical environment or clusters, the modes can hybridize and exhibit different behavior and properties. In this work, we study experimentally and numerically the substrate-induced hybridization of plasmonic modes of a silver nanocylinder. The applications of plasmonic nanoparticles such as refractive index sensing and enhanced spectroscopies often rely on the sustained mode spectral position and specific spatial near-field distribution. However, we show that the implementation of such plasmonic nanoparticles in a sensing system can result in a change of the modes nature, its hybridization or dehybridization. These changes are not clearly pronounced in the far-field spectra and then may result in unexpected modifications of the sensor behavior. We show that the hybridization between the dipolar and quadrupolar modes of the plasmonic nanoparticle on the substrate results from quadrupolar mode excitation due to the superposition of the reflected and incoming light and, then, depends on the reflection of the substrate. The existence of the hybridized modes strongly depends on the surrounding environment of nanoparticles, and after the deposition of the nanometric polymer layer on top of the nanoparticle the hybridized modes vanish and are replaced by uncoupled multipolar resonances.
△ Less
Submitted 12 December, 2021;
originally announced December 2021.
-
Colloidal Synthesis of Crystalline Aluminum Nanoparticles for UV Plasmonics
Authors:
Marion Castilla,
Silvère Schuermans,
Davy Gérard,
Jérôme Martin,
Thomas Maurer,
Uri Hananel,
Gil Markovich,
Jérôme Plain,
Julien Proust
Abstract:
Numerous applications of nanotechnologies rely on the wide availability of high-quality crystalline nanoparticles (NPs). Although the chemical synthesis of noble metal nanoparticles (gold and silver) is well mastered, pushing the optical response of metallic nanoparticles towards the ultraviolet requires other materials, such as aluminum. Although a few demonstrations of chemical synthesis of Al n…
▽ More
Numerous applications of nanotechnologies rely on the wide availability of high-quality crystalline nanoparticles (NPs). Although the chemical synthesis of noble metal nanoparticles (gold and silver) is well mastered, pushing the optical response of metallic nanoparticles towards the ultraviolet requires other materials, such as aluminum. Although a few demonstrations of chemical synthesis of Al nanoparticles have been reported so far, an elaboration path allowing for a wide range of NP size that is compatible with mass production has yet to be demonstrated. In this article, we report on the production of spherical, size-controlled crystalline Al NPs starting from commercial Al foils and without the use of a catalyst. The proposed method combines sonochemistry with solvochemistry and is fully up-scalable. The obtained NPs have a 10-100 nm crystalline Al core surrounded by a thin alumina shell, allowing long-term stability in ethanol. Well-defined plasmonic resonances in the UV and visible ranges are experimentally evidenced on single nanoparticles.
△ Less
Submitted 16 March, 2022; v1 submitted 4 October, 2021;
originally announced October 2021.
-
Synthesis of metallic nanoparticles for heterogeneous catalysis: Application to the Direct Borohydride Fuel Cell
Authors:
Fabrice Asonkeng,
Gael Maranzana,
Julien Proust,
Manuel Francois,
Lea Le Joncour,
Jerome Dillet,
Sophie Didierjean,
Guillaume Braesh,
Marian Chatenet,
Thomas Maurer
Abstract:
Until now, the fabrication of electrocatalysts to guarantee long life of fuel cells and low consumption of noble metals remains a major challenge. The electrocatalysts based on metals or metal oxides which are used today are limited by the complexity of their synthesis processes and require several steps before depositing the catalysts on the substrate. Herein is described a chemical synthesis pro…
▽ More
Until now, the fabrication of electrocatalysts to guarantee long life of fuel cells and low consumption of noble metals remains a major challenge. The electrocatalysts based on metals or metal oxides which are used today are limited by the complexity of their synthesis processes and require several steps before depositing the catalysts on the substrate. Herein is described a chemical synthesis process that consists of a single-step synthesis and direct deposition of catalysts nanoparticles such as gold (Au), palladium (Pd) and platinum (Pt) in the thickness of a carbon-fibers-based porous transport layer (PTL). The synthesis process essentially consists of dissolving in the same PGMEA (Propylene glycol methyl ether acetate) solvent a metal precursor (HAuCl4 or PdNO2 or PtCl4) and a homopolymer PMMA (Polymethylmetacrylate), then the metal solution is deposited on the surface of the PTL after cleaning. Special emphasis is made on Pt-based materials. The obtained PTL-supported nanoparticles were firstly characterized by scanning electron microscopy (SEM) to evaluate their morphology, and then X-Ray diffraction (XRD) to observe the crystal phases. To validate the methodology, Pt-coated PTL materials have been used as anode for the borohydride oxidation reaction (BOR) in a direct borohydride fuel cell (DBFC) and compared to a state-of-the-art nickel electrode. There is an optimum loading of platinum (below 0.16 mg Pt/cm2) which constitutes the best compromise between power density and faradic efficiency for the borohydride oxidation reaction (BOR). Thanks to this low Pt loading, hydrogen evolved during the anodic reaction is completely valorized. These electrodes combine the advantages of high-performance with a very low metal loading, hence lowering materials cost.
△ Less
Submitted 25 March, 2021;
originally announced March 2021.
-
Enhancement and Inhibition of Spontaneous Photon Emission by Resonant Silicon Nanoantennas
Authors:
Dorian Bouchet,
Mathieu Mivelle,
Julien Proust,
Bruno Gallas,
Igor Ozerov,
Maria F. Garcia-Parajo,
Angelo Gulinatti,
Ivan Rech,
Yannick De Wilde,
Nicolas Bonod,
Valentina Krachmalnicoff,
Sébastien Bidault
Abstract:
Substituting noble metals for high-index dielectrics has recently been proposed as an alternative strategy in nanophotonics to design broadband optical resonators and circumvent the ohmic losses of plasmonic materials. In this report, we demonstrate that subwavelength silicon nanoantennas can manipulate the photon emission dynamics of fluorescent molecules. In practice, it is showed that dielectri…
▽ More
Substituting noble metals for high-index dielectrics has recently been proposed as an alternative strategy in nanophotonics to design broadband optical resonators and circumvent the ohmic losses of plasmonic materials. In this report, we demonstrate that subwavelength silicon nanoantennas can manipulate the photon emission dynamics of fluorescent molecules. In practice, it is showed that dielectric nanoantennas can both increase and decrease the local density of optical states (LDOS) at room temperature, a process that is inaccessible with noble metals at the nanoscale. Using scanning probe microscopy, we analyze quantitatively, in three dimensions, the near-field interaction between a 100 nm fluorescent nanosphere and silicon nanoantennas with diameters ranging between 170 nm and 250 nm. Associated to numerical simulations, these measurements indicate increased or decreased total spontaneous decay rates by up to 15 % and a gain in the collection efficiency of emitted photons by up to 85 %. Our study demonstrates the potential of silicon-based nanoantennas for the low-loss manipulation of solid-state emitters at the nanoscale and at room temperature.
△ Less
Submitted 30 December, 2016; v1 submitted 10 May, 2016;
originally announced May 2016.
-
Enhancing LSPR sensitivity of Au gratings through graphene coupling to Au film
Authors:
T. Maurer,
R. Nicolas,
G. Lévêque,
P. Subramanian,
J. Proust,
J. Béal,
S. Schuermans,
J. -P. Vilcot,
Z. Herro,
M. Kazan,
J. Plain,
R. Boukherroub,
A. Akjouj,
B. Djafari-Rouhani,
P. -M. Adam,
S. Szunerits
Abstract:
A particular interesting plasmonic system is that of metallic nanostructures interacting with metal films. As the LSPR behavior of gold nanostructures (Au NPs) on the top of a gold thin film is exquisitely sensitive to the spacer distance of the film-Au NPs, we investigate in the present work the influence of a few-layered graphene spacer on the LSPR behavior of the NPs. The idea is to evidence th…
▽ More
A particular interesting plasmonic system is that of metallic nanostructures interacting with metal films. As the LSPR behavior of gold nanostructures (Au NPs) on the top of a gold thin film is exquisitely sensitive to the spacer distance of the film-Au NPs, we investigate in the present work the influence of a few-layered graphene spacer on the LSPR behavior of the NPs. The idea is to evidence the role of few-layered graphene as one of the thinnest possible spacer. We first show that the coupling to the Au film induces a strong lowering at around 507nm and sharpening of the main LSPR of the Au NPs. Moreover, a blue shift in the main LSP resonance of about 13 nm is observed in the presence of a few-layered graphene spacer when compared to the case where gold nanostructures are directly linked to a gold thin film. Numerical simulations suggest that this LSP mode is dipolar and that the hot spots of the electric field are pushed to the top corners of the NPs, which makes it very sensitive to surrounding medium optical index changes and thus appealing for sensing applications. A figure of merit (FoM) of such a system (gold/graphene/ Au NPs) is 2.8, as compared to 2.1 for gold/Au NPs either a 33% sensitivity gain and opens up new sensing strategies.
△ Less
Submitted 19 November, 2013;
originally announced November 2013.
-
Copolymer template control of gold nanoparticle synthesis via thermal annealing
Authors:
A. Plaud,
A. Sarrazin,
J. Béal,
J. Proust,
P. Royer,
J. -L. Bijeon,
J. Plain,
P. -M. Adam,
T. Maurer
Abstract:
We present here an original process combining top-down and bottom-up approaches by annealing a thin gold film evaporated onto a hole template made by etching a PS-PMMA copolymer film. Such process allows a better control of the gold nanoparticle size distribution which provides a sharper localized surface plasmon resonance. This makes such route appealing for sensing applications since the figure…
▽ More
We present here an original process combining top-down and bottom-up approaches by annealing a thin gold film evaporated onto a hole template made by etching a PS-PMMA copolymer film. Such process allows a better control of the gold nanoparticle size distribution which provides a sharper localized surface plasmon resonance. This makes such route appealing for sensing applications since the figure of merit of the Au nanoparticles obtained after thermal evaporation is more than doubled. Such process could besides allow tuning the localized surface plasmon resonance by using copolymer with various molecular weights and thus be attractive for surface enhanced raman spectroscopy.
△ Less
Submitted 31 October, 2013;
originally announced October 2013.
-
Optical properties of Au colloids self-organized into rings via copolymer templates
Authors:
S. Lamarre,
A. Sarrazin,
J. Proust,
H. Yockell-Lelièvre,
J. Plain,
A. M. Ritcey,
T. Maurer
Abstract:
The investigation of the Localized Surface Plasmon Resonance for plasmonic nanoparticles has opened new perspectives for optical nanosensors. Today, an issue in plasmonics is the development of large scale and low cost devices. We focus here on the Langmuir-Blodgett technique to self-organize gold nanoparticles (~ 7 nm) into rings (~ 60 nm) via polystyrene-b-polymethylmethacrylate templates. In pa…
▽ More
The investigation of the Localized Surface Plasmon Resonance for plasmonic nanoparticles has opened new perspectives for optical nanosensors. Today, an issue in plasmonics is the development of large scale and low cost devices. We focus here on the Langmuir-Blodgett technique to self-organize gold nanoparticles (~ 7 nm) into rings (~ 60 nm) via polystyrene-b-polymethylmethacrylate templates. In particular, we investigated the optical properties of organized gold nanoparticle rings over large areas and report experimental evidence for plasmon resonances of both individual nanoparticles and collective modes. This paves the way for designing devices with multiple resonances in the visible-Infra-red spectrum and developing optical sensors.
△ Less
Submitted 19 April, 2013;
originally announced April 2013.
-
Incised-valley morphologies and sedimentary-fills within the inner shelf of the northern Bay of Biscay
Authors:
Eric Chaumillon,
Jean-Noël Proust,
David Ménier,
Nicolas Weber
Abstract:
This study is a first synthesis focused on incised-valleys located within the inner shelf of the Bay of Biscay. It is based on previously published results obtained during recent seismic surveys and coring campaigns. The morphology of the valleys appears to be strongly controlled by tectonics and lithology. The Pleistocene sedimentary cover of the shelf is very thin and discontinuous with a maxi…
▽ More
This study is a first synthesis focused on incised-valleys located within the inner shelf of the Bay of Biscay. It is based on previously published results obtained during recent seismic surveys and coring campaigns. The morphology of the valleys appears to be strongly controlled by tectonics and lithology. The Pleistocene sedimentary cover of the shelf is very thin and discontinuous with a maximum thickness ranging between 30 and 40 m in incised-valley fills. Thus the incised bedrock morphology plays a key-role by controlling hydrodynamics and related sediment transport and deposition that explains some variations of those incised-valley fills with respect to the previously published general models.
△ Less
Submitted 14 October, 2008;
originally announced October 2008.