-
Spatially multiplexed single-photon sources based on binary-tree multiplexers with optimized structure
Authors:
Matyas Mechler,
Peter Adam
Abstract:
We develop a method for optimizing the structure of general binary-tree multiplexers realized with asymmetric photon routers aiming at improving the performance of spatially multiplexed single-photon sources. Our procedure systematically considers all possible binary-tree multiplexers that can be formed by a certain number of photon routers. Using this method one can select the multiplexer structu…
▽ More
We develop a method for optimizing the structure of general binary-tree multiplexers realized with asymmetric photon routers aiming at improving the performance of spatially multiplexed single-photon sources. Our procedure systematically considers all possible binary-tree multiplexers that can be formed by a certain number of photon routers. Using this method one can select the multiplexer structure that leads to the highest single-photon probability for a given set of loss parameters characterizing the system. We determine the optimal general binary-tree multiplexers for experimentally realizable values of the transmission coefficients of the photon routers and that of the detector efficiency. We show that single-photon sources based on such optimal multiplexers yield higher single-photon probabilities than that can be achieved with single-photon sources based on any other spatial multiplexer considered in the literature. Our approach improves the performance of multiplexed single-photon sources even for small system sizes which is the typical situation in current experiments.
△ Less
Submitted 24 July, 2024;
originally announced July 2024.
-
Photon number states via iterated photon addition in a loop
Authors:
Barna Mendei,
Gábor Homa,
Péter Ádám,
Mátyás Koniorczyk
Abstract:
We consider the probabilistic generation of time-bin photon number states from a train of single photon pulses. We propose a simple interferometric feedback loop setup having a beam splitter and a possibly non-idel detector. This Hong-Ou-Mandel type scheme implements iterated photon additions. Our detailed study shows that up to 4 photons this simple setup can provide reasonable success probabilit…
▽ More
We consider the probabilistic generation of time-bin photon number states from a train of single photon pulses. We propose a simple interferometric feedback loop setup having a beam splitter and a possibly non-idel detector. This Hong-Ou-Mandel type scheme implements iterated photon additions. Our detailed study shows that up to 4 photons this simple setup can provide reasonable success probabilities and fidelities.
△ Less
Submitted 27 June, 2024;
originally announced June 2024.
-
Inductive Proof of Borchardt's Theorem
Authors:
Andy A. Chavez,
Alec P. Adam,
Paul W. Ayers,
Ramón Alain Miranda-Quintana
Abstract:
We provide an inductive proof of Borchardt's theorem for calculating the permanent of a Cauchy matrix via the determinants of auxiliary matrices. This result has implications for antisymmetric products of interacting geminals (APIG), and suggests that the restriction of the APIG coefficients to Cauchy form (typically called APr2G) is special in its tractability.
We provide an inductive proof of Borchardt's theorem for calculating the permanent of a Cauchy matrix via the determinants of auxiliary matrices. This result has implications for antisymmetric products of interacting geminals (APIG), and suggests that the restriction of the APIG coefficients to Cauchy form (typically called APr2G) is special in its tractability.
△ Less
Submitted 11 September, 2023;
originally announced September 2023.
-
Simulating nonlocal no-signaling boxes
Authors:
Mátyás Koniorczyk,
Péter Naszvadi,
András Bodor,
Ottó Hanyecz,
Peter Adam,
Miklós Pintér
Abstract:
We present a computer framework to simulate two-party boxes that exhibit nonclassical no-signaling correlations through a Web-based application programming interface (RESTful Web API). Unlike real quantum-based correlations, the simulated ones are not instantaneous and are created via communication with a trusted server. They can, however, be useful in a number of applications, including e.g. teac…
▽ More
We present a computer framework to simulate two-party boxes that exhibit nonclassical no-signaling correlations through a Web-based application programming interface (RESTful Web API). Unlike real quantum-based correlations, the simulated ones are not instantaneous and are created via communication with a trusted server. They can, however, be useful in a number of applications, including e.g. teaching the use of nonlocal correlations, designing and testing infocommunication systems, and engineering software interfaces for new quantum hardware. We demonstrate the use of the API via the simple implementation of the Clauser-Horne-Shimony-Holt game. Up to our knowledge no such a framework has been implemented or proposed thus far.
△ Less
Submitted 13 December, 2022;
originally announced December 2022.
-
Assessment of the proton boron fusion reaction for practical radiation therapy applications using MCNP6
Authors:
David P. Adam,
Bryan P. Bednarz
Abstract:
The proton boron fusion reaction, 11B(p, 3α), is investigated using MCNP6 to assess the viability for potential use in radiation therapy. The 11B(p, 3α) is theoretically desirable because it could combine the localized dose delivery protons exhibit (Bragg peak) with the creation of three high LET α particles that locally deposit energy in tumor regions. Simple simulations of a proton pencil beam i…
▽ More
The proton boron fusion reaction, 11B(p, 3α), is investigated using MCNP6 to assess the viability for potential use in radiation therapy. The 11B(p, 3α) is theoretically desirable because it could combine the localized dose delivery protons exhibit (Bragg peak) with the creation of three high LET α particles that locally deposit energy in tumor regions. Simple simulations of a proton pencil beam incident upon a water phantom and a water phantom with an axial region also containing boron were modeled using MCNP6 in order to determine the extent of the impact boron had upon the calculated energy deposition. The MCNP simulations performed demonstrated that the proton boron fusion reaction rate at clinically relevant boron concentrations was too small in order to have any measurable impact on the absorbed dose. It was determined that there are no good evaluations of the 11B(p, 3α) reaction for use in MCNPX/6 and further work should be conducted in cross section evaluations in order to definitively evaluate the feasibility of the proton boron fusion reaction for use in radiation therapy applications.
△ Less
Submitted 29 September, 2022;
originally announced September 2022.
-
Sequential unsharp measurement of photon polarization
Authors:
Peter Adam,
Lajos Diósi
Abstract:
We propose a general experimental scheme based on binary trees of partially polarizing beam splitters (PPBSs) for realizing sequential unsharp measurements of photon polarization. The sharpnesses and the bases of the particular photon polarization measurements can be chosen arbitrarily by using corresponding PPBSs and phase plates in the setup. In the limit of low sharpnesses the scheme can realiz…
▽ More
We propose a general experimental scheme based on binary trees of partially polarizing beam splitters (PPBSs) for realizing sequential unsharp measurements of photon polarization. The sharpnesses and the bases of the particular photon polarization measurements can be chosen arbitrarily by using corresponding PPBSs and phase plates in the setup. In the limit of low sharpnesses the scheme can realize sequential weak measurements, too. We develop a general formalism for describing sequential unsharp measurements of photon polarization in which the particular unsharp measurements are characterized by appropriate measurement operators. We show that a straightforward experimental realization of this model is the proposed scheme. In this formalism the output polarization states after the sequential measurement and any correlation functions characterizing the measurement results can be easily calculated. Our model can be used for analyzing the consequences of applying postselection and reselection in the measurement. We derive the anomalous mean value for an unsharp polarization measurement with postselection and the anomalous second-order correlation function for the sequential unsharp measurement of photon polarization with reselection. We show that these anomalies can be easily measured using the proposed scheme.
△ Less
Submitted 19 September, 2022;
originally announced September 2022.
-
A Set Membership Approach to Discovering Feature Relevance and Explaining Neural Classifier Decisions
Authors:
Stavros P. Adam,
Aristidis C. Likas
Abstract:
Neural classifiers are non linear systems providing decisions on the classes of patterns, for a given problem they have learned. The output computed by a classifier for each pattern constitutes an approximation of the output of some unknown function, mapping pattern data to their respective classes. The lack of knowledge of such a function along with the complexity of neural classifiers, especiall…
▽ More
Neural classifiers are non linear systems providing decisions on the classes of patterns, for a given problem they have learned. The output computed by a classifier for each pattern constitutes an approximation of the output of some unknown function, mapping pattern data to their respective classes. The lack of knowledge of such a function along with the complexity of neural classifiers, especially when these are deep learning architectures, do not permit to obtain information on how specific predictions have been made. Hence, these powerful learning systems are considered as black boxes and in critical applications their use tends to be considered inappropriate. Gaining insight on such a black box operation constitutes a one way approach in interpreting operation of neural classifiers and assessing the validity of their decisions. In this paper we tackle this problem introducing a novel methodology for discovering which features are considered relevant by a trained neural classifier and how they affect the classifier's output, thus obtaining an explanation on its decision. Although, feature relevance has received much attention in the machine learning literature here we reconsider it in terms of nonlinear parameter estimation targeted by a set membership approach which is based on interval analysis. Hence, the proposed methodology builds on sound mathematical approaches and the results obtained constitute a reliable estimation of the classifier's decision premises.
△ Less
Submitted 4 June, 2023; v1 submitted 5 April, 2022;
originally announced April 2022.
-
Partial volume correction improves theranostic 124I/131I-CLR1404 tumor dosimetry in xenograft models of head and neck cancer
Authors:
Ian R. Marsh,
Chunrong Li,
Joseph Grudzinski,
Justin Jeffery,
Colin Longhurst,
David P. Adam,
Reinier Hernandez,
Jamey P. Weichert,
Paul M. Harari,
Bryan P. Bednarz
Abstract:
Combination radiopharmaceutical and external beam radiotherapy offers the potential to diminish locoregional toxicity that remains dose-limiting in the conventional treatment paradigm for recurrent head and neck cancer (HNC). In this study, we investigated the tumor targeting capacity of 131I-CLR1404 (CLR 131) in various HNC xenograft mouse models and the impact of partial volume correction on the…
▽ More
Combination radiopharmaceutical and external beam radiotherapy offers the potential to diminish locoregional toxicity that remains dose-limiting in the conventional treatment paradigm for recurrent head and neck cancer (HNC). In this study, we investigated the tumor targeting capacity of 131I-CLR1404 (CLR 131) in various HNC xenograft mouse models and the impact of partial volume correction on theranostic dosimetry based on 124I-CLR1404 (CLR 124) PET/CT imaging. Methods: Mice bearing flank tumor xenograft models of HNC (6 murine cell line- and 6 human patient-derived) were intravenously administered 6.5-9.1 MBq of CLR 124 and imaged five times over the course of six days using microPET/CT. In vivo tumor uptake of CLR 124 was assessed and partial volume corrections (PVC) for 124I were applied using a novel preclinical phantom. Using subject-specific theranostic dosimetry estimations for CLR 131 based on CLR 124 imaging, a discrete radiation dose escalation study was performed to evaluate tumor growth response to CLR 131 relative to a single fraction of XRT. Results: PET imaging demonstrated consistent tumor selective uptake and retention of CLR 124 across all HNC xenograft models. Peak uptake of 4.4 +/- 0.8% and 4.2 +/- 0.4% was observed in SCC-22B and UW-13, respectively. PVC application increased uptake measures by 47-188% and reduced absolute differences between in vivo and ex vivo uptake measurements from 3.3 to 1.0 %IA/g. Tumor dosimetry averaged over all HNC models was 0.85 +/- 0.27 Gy/MBq (1.58 +/- 0.46 Gy/MBq with PVC). Therapeutic CLR 131 studies demonstrated a variable, but linear relationship between CLR 131 radiation dose and tumor growth delay (p < 0.05). Conclusion: CLR 131 demonstrated tumoricidal capacity in preclinical HNC tumor models and the theranostic pairing of CLR 124/131 presents a promising new treatment approach for personalizing administration of CLR 131.
△ Less
Submitted 13 February, 2022;
originally announced February 2022.
-
Validation of Monte Carlo Iodine-131 radiopharmaceutical dosimetry workflow using a 3D printed anthropomorphic head and neck phantom
Authors:
David P. Adam,
Joseph Grudzinski,
Ian Bormett,
Benjamin L. Cox,
Ian R. Marsh,
Tyler J. Bradshaw,
Paul Harari,
Bryan Bednarz
Abstract:
Purpose: In this study, we present the creation of an anthropomorphic, head and neck, nuclear medicine phantom and its characterization for the validation of a Monte Carlo, SPECT image based, Iodine-131 RPT dosimetry workflow.
Methods: 3D printing techniques were used to create the anthropomorphic phantom from a patient CT dataset. Three Iodine-131 SPECT/CT imaging studies were performed using a…
▽ More
Purpose: In this study, we present the creation of an anthropomorphic, head and neck, nuclear medicine phantom and its characterization for the validation of a Monte Carlo, SPECT image based, Iodine-131 RPT dosimetry workflow.
Methods: 3D printing techniques were used to create the anthropomorphic phantom from a patient CT dataset. Three Iodine-131 SPECT/CT imaging studies were performed using a homogeneous, Jaszczak, and an anthropomorphic phantom to quantify the SPECT images. The impact of collimator detector response (CDR) modeling and volume-based partial volume corrections (PVC) upon the absorbed dose was calculated using an image based, Geant4 Monte Carlo RPT dosimetry workflow and compared against a ground truth scenario. Finally, uncertainties were quantified in accordance with recent EANM guidelines.
Results: The 3D printed anthropomorphic phantom was an accurate re-creation of patient anatomy including bone. The extrapolated Jaszczak recovery coefficients were greater than that of the 3D printed insert (~22.8 ml) for both the CDR and non-CDR cases. Utilizing Jaszczak phantom PVCs, the absorbed dose was underpredicted by 0.7% and 4.9% without and with CDR, respectively. Utilizing anthropomorphic phantom RCs overpredicted the absorbed dose by 3% both with and without CDR. All dosimetry scenarios that incorporated PVC were within the calculated uncertainty of the activity. The uncertainties in the cumulative activity ranged from 25.6% to 113% for Jaszczak spheres ranging in volume from 0.5 ml to 16 ml.
Conclusion: The accuracy of Monte Carlo-based dosimetry for Iodine-131 RPT in head and neck cancer was validated with an anthropomorphic phantom. Future applications of the phantom could involve 3D printing and characterizing patient specific volumes for more personalized RPT dosimetry estimates.
△ Less
Submitted 3 February, 2022;
originally announced February 2022.
-
Hybridization and Dehybridization of Plasmonic Modes
Authors:
Artur Movsesyan,
Alina Muravitskaya,
Marion Castilla,
Sergei Kostcheev,
Julien Proust,
Jérôme Plain,
Anne-Laure Baudrion,
Rémi Vincent,
Pierre-Michel Adam
Abstract:
The plasmon resonances (modes) of a metal nanostructure can be defined as a dipole, a quadrupole, or high-order modes depending on the surface charge distribution induced by the incident field. In a non-symmetrical environment or clusters, the modes can hybridize and exhibit different behavior and properties. In this work, we study experimentally and numerically the substrate-induced hybridization…
▽ More
The plasmon resonances (modes) of a metal nanostructure can be defined as a dipole, a quadrupole, or high-order modes depending on the surface charge distribution induced by the incident field. In a non-symmetrical environment or clusters, the modes can hybridize and exhibit different behavior and properties. In this work, we study experimentally and numerically the substrate-induced hybridization of plasmonic modes of a silver nanocylinder. The applications of plasmonic nanoparticles such as refractive index sensing and enhanced spectroscopies often rely on the sustained mode spectral position and specific spatial near-field distribution. However, we show that the implementation of such plasmonic nanoparticles in a sensing system can result in a change of the modes nature, its hybridization or dehybridization. These changes are not clearly pronounced in the far-field spectra and then may result in unexpected modifications of the sensor behavior. We show that the hybridization between the dipolar and quadrupolar modes of the plasmonic nanoparticle on the substrate results from quadrupolar mode excitation due to the superposition of the reflected and incoming light and, then, depends on the reflection of the substrate. The existence of the hybridized modes strongly depends on the surrounding environment of nanoparticles, and after the deposition of the nanometric polymer layer on top of the nanoparticle the hybridized modes vanish and are replaced by uncoupled multipolar resonances.
△ Less
Submitted 12 December, 2021;
originally announced December 2021.
-
Spatially multiplexed single-photon sources based on incomplete binary-tree multiplexers
Authors:
Peter Adam,
Ferenc Bodog,
Matyas Mechler
Abstract:
We propose two novel types of spatially multiplexed single-photon sources based on incomplete binary-tree multiplexers. The incomplete multiplexers are extensions of complete binary-tree multiplexers, and they contain incomplete branches either at the input or at the output of them. We analyze and optimize these systems realized with general asymmetric routers and photon-number-resolving detectors…
▽ More
We propose two novel types of spatially multiplexed single-photon sources based on incomplete binary-tree multiplexers. The incomplete multiplexers are extensions of complete binary-tree multiplexers, and they contain incomplete branches either at the input or at the output of them. We analyze and optimize these systems realized with general asymmetric routers and photon-number-resolving detectors by applying a general statistical theory introduced previously that includes all relevant loss mechanisms. We show that the use of any of the two proposed multiplexing system can lead to higher single-photon probabilities than that achieved with complete binary-tree multiplexers. Single-photon sources based on output-extended incomplete binary-tree multiplexers outperform those based on input-extended ones in the considered parameter ranges, and they can in principle yield single-photon probabilities higher than 0.93 when they are realized by state-of-the-art bulk optical elements.
△ Less
Submitted 24 November, 2021;
originally announced November 2021.
-
Single-photon sources based on asymmetric spatial multiplexing with optimized inputs
Authors:
Peter Adam,
Ferenc Bodog,
Matyas Koniorczyk,
Matyas Mechler
Abstract:
We develop a statistical theory describing the operation of multiplexed single-photon sources equipped with photon-number-resolving detectors that includes the potential use of different input mean photon numbers in each of the multiplexed units. This theory accounts for all relevant loss mechanisms and allows for the maximization of the single-photon probabilities under realistic conditions by op…
▽ More
We develop a statistical theory describing the operation of multiplexed single-photon sources equipped with photon-number-resolving detectors that includes the potential use of different input mean photon numbers in each of the multiplexed units. This theory accounts for all relevant loss mechanisms and allows for the maximization of the single-photon probabilities under realistic conditions by optimizing the different input mean photon numbers unit-wise and the detection strategy that can be defined in terms of actual detected photon numbers. We apply this novel description to analyze periodic single-photon sources based on asymmetric spatial multiplexing realized with general asymmetric routers. We show that optimizing the different input mean photon numbers results in maximal single-photon probabilities higher than those achieved by using optimal identical input mean photon numbers in this setup. We identify the parameter ranges of the system for which the enhancement in the single-photon probability for the various detection strategies is relevant. An additional advantage of the unit-wise optimization of the input mean photon numbers is that it can result in the decrease of the optimal system size needed to maximize the single-photon probability. We find that the highest single-photon probability that our scheme can achieve in principle when realized with state-of-the-art bulk optical elements is 0.935. This is the highest one to our knowledge that has been reported thus far in the literature for experimentally realizable single-photon sources.
△ Less
Submitted 2 October, 2021;
originally announced October 2021.
-
Direct observation of structural heterogeneity and tautomerization of single hypericin molecules
Authors:
Quan Liu,
Frank Wackenhut,
Liangxuan Wang,
Otto Hauler,
Juan Carlos Roldao,
Pierre-Michel Adam,
Marc Brecht,
Johannes Gierschner,
Alfred J. Meixner
Abstract:
Tautomerization is a fast chemical reaction where structures of the reactants differ only in the position of a proton and a double bond. Tautomerization often occurs in natural substances and is a fundamental process in organic- and biochemistry. However, studying the optical properties of tautomeric species is challenging due to ensemble averaging. Many molecules, such as porphines, porphycenes o…
▽ More
Tautomerization is a fast chemical reaction where structures of the reactants differ only in the position of a proton and a double bond. Tautomerization often occurs in natural substances and is a fundamental process in organic- and biochemistry. However, studying the optical properties of tautomeric species is challenging due to ensemble averaging. Many molecules, such as porphines, porphycenes or phenanthroperylene quinones, exhibit a reorientation of the transition dipole moment (TDM) during tautomerization, which can be directly observed in a single molecule experiment. A prominent phenanthroperylene quinone is hypericin showing antiviral, antidepressive, and photodynamical properties. Here, we study single hypericin molecules by using confocal microscopy combined with higher order laser modes. Observing abrupt flipping of the image pattern allows to draw conclusions about the coexistence of different tautomers and their conversion path. Time-dependent density functional theory calculations show that hypericin is cycling between the four most stable tautomers. This approach allows to unambiguously assign a TDM orientation to a specific tautomer and enables to determine the chemical structure in situ. Additionally, tautomerization can not only be observed by the image pattern orientation, but also as intermittency in the fluorescence emission of a single molecule. Time correlated single photon counting enables to determine the excited state lifetimes of the hypericin tautomers. Our approach is not only limited to hypericin, but can be applied to other molecules showing a TDM reorientation during tautomerization, helping to get a deeper understanding of this important process.
△ Less
Submitted 3 November, 2020;
originally announced November 2020.
-
Single-stage intake gesture detection using CTC loss and extended prefix beam search
Authors:
Philipp V. Rouast,
Marc T. P. Adam
Abstract:
Accurate detection of individual intake gestures is a key step towards automatic dietary monitoring. Both inertial sensor data of wrist movements and video data depicting the upper body have been used for this purpose. The most advanced approaches to date use a two-stage approach, in which (i) frame-level intake probabilities are learned from the sensor data using a deep neural network, and then (…
▽ More
Accurate detection of individual intake gestures is a key step towards automatic dietary monitoring. Both inertial sensor data of wrist movements and video data depicting the upper body have been used for this purpose. The most advanced approaches to date use a two-stage approach, in which (i) frame-level intake probabilities are learned from the sensor data using a deep neural network, and then (ii) sparse intake events are detected by finding the maxima of the frame-level probabilities. In this study, we propose a single-stage approach which directly decodes the probabilities learned from sensor data into sparse intake detections. This is achieved by weakly supervised training using Connectionist Temporal Classification (CTC) loss, and decoding using a novel extended prefix beam search decoding algorithm. Benefits of this approach include (i) end-to-end training for detections, (ii) simplified timing requirements for intake gesture labels, and (iii) improved detection performance compared to existing approaches. Across two separate datasets, we achieve relative $F_1$ score improvements between 1.9% and 6.2% over the two-stage approach for intake detection and eating/drinking detection tasks, for both video and inertial sensors.
△ Less
Submitted 20 November, 2020; v1 submitted 7 August, 2020;
originally announced August 2020.
-
OREBA: A Dataset for Objectively Recognizing Eating Behaviour and Associated Intake
Authors:
Philipp V. Rouast,
Hamid Heydarian,
Marc T. P. Adam,
Megan E. Rollo
Abstract:
Automatic detection of intake gestures is a key element of automatic dietary monitoring. Several types of sensors, including inertial measurement units (IMU) and video cameras, have been used for this purpose. The common machine learning approaches make use of the labeled sensor data to automatically learn how to make detections. One characteristic, especially for deep learning models, is the need…
▽ More
Automatic detection of intake gestures is a key element of automatic dietary monitoring. Several types of sensors, including inertial measurement units (IMU) and video cameras, have been used for this purpose. The common machine learning approaches make use of the labeled sensor data to automatically learn how to make detections. One characteristic, especially for deep learning models, is the need for large datasets. To meet this need, we collected the Objectively Recognizing Eating Behavior and Associated Intake (OREBA) dataset. The OREBA dataset aims to provide comprehensive multi-sensor data recorded during the course of communal meals for researchers interested in intake gesture detection. Two scenarios are included, with 100 participants for a discrete dish and 102 participants for a shared dish, totalling 9069 intake gestures. Available sensor data consists of synchronized frontal video and IMU with accelerometer and gyroscope for both hands. We report the details of data collection and annotation, as well as details of sensor processing. The results of studies on IMU and video data involving deep learning models are reported to provide a baseline for future research. Specifically, the best baseline models achieve performances of $F_1$ = 0.853 for the discrete dish using video and $F_1$ = 0.852 for the shared dish using inertial data.
△ Less
Submitted 29 September, 2020; v1 submitted 30 July, 2020;
originally announced July 2020.
-
Optimization of multiplexed single-photon sources operated with photon-number-resolving detectors
Authors:
Ferenc Bodog,
Matyas Mechler,
Matyas Koniorczyk,
Peter Adam
Abstract:
Detectors inherently capable of resolving photon numbers have undergone a significant development recently, and this is expected to affect multiplexed periodic single-photon sources where such detectors can find their applications. We analyze various spatially and time-multiplexed periodic single-photon source arrangements with photon-number-resolving detectors, partly to identify the cases when t…
▽ More
Detectors inherently capable of resolving photon numbers have undergone a significant development recently, and this is expected to affect multiplexed periodic single-photon sources where such detectors can find their applications. We analyze various spatially and time-multiplexed periodic single-photon source arrangements with photon-number-resolving detectors, partly to identify the cases when they outperform those with threshold detectors. We develop a full statistical description of these arrangements in order to optimize such systems with respect to maximal single-photon probability, taking into account all relevant loss mechanisms. The model is suitable for the description of all spatial and time multiplexing schemes. Our detailed analysis of symmetric spatial multiplexing identifies a particular range of loss parameters in which the use of the new type of detectors leads to an improvement. Photon number resolution opens an additional possibility for optimizing the system in that the heralding strategy can be defined in terms of actual detected photon numbers. Our results show that this kind of optimization opens an additional parameter range of improved efficiency. Moreover, this higher efficiency can be achieved by using less multiplexed units, i.e., smaller system size as compared to threshold-detector schemes. We also extend our investigation to certain time-multiplexed schemes of actual experimental relevance. We find that the highest single-photon probability is 0.907 that can be achieved by binary bulk time multiplexers using photon-number-resolving detectors.
△ Less
Submitted 25 March, 2020;
originally announced March 2020.
-
Refractive index mediated plasmon hybridization in an array of aluminium nanoparticles
Authors:
Alina Muravitskaya,
Anisha Gokarna,
Artur Movsesyan,
Sergei Kostcheev,
Anna Rumyantseva,
Christophe Couteau,
Gilles Lerondel,
Anne-Laure Baudrion,
Sergey Gaponenko,
Pierre Michel Adam
Abstract:
The arrangement of plasmonic nanoparticles in a non-symmetrical environment can feature the far-field and/or near-field interactions depending on the distance between the objects. In this work, we study the hybridization of three intrinsic plasmonic modes (dipolar, quadrupolar and hexapolar modes) sustained by one elliptical aluminium nanocylinder, as well as behavior of the hybridized modes when…
▽ More
The arrangement of plasmonic nanoparticles in a non-symmetrical environment can feature the far-field and/or near-field interactions depending on the distance between the objects. In this work, we study the hybridization of three intrinsic plasmonic modes (dipolar, quadrupolar and hexapolar modes) sustained by one elliptical aluminium nanocylinder, as well as behavior of the hybridized modes when the nanoparticles are organized in array or when the refractive index of the surrounding medium is changed. The position and the intensity of these hybridized modes were shown to be affected by the near-field and far-field interactions between the nanoparticles. In this work, two hybridized modes were tuned in the UV spectral range to spectrally coincide with the intrinsic interband excitation and emission bands of ZnO nanocrystals. The refractive index of the ZnO nanocrystals layer influences the positions of the plasmonic modes and increases the role of the superstrate medium, which in turn results in the appearance of two separate modes in the small spectral region. Hence, the enhancement of ZnO nanocrystals photoluminescence benefits from the simultaneous excitation and emission enhancements.
△ Less
Submitted 21 February, 2020;
originally announced February 2020.
-
Star Product Formalism for Probability and Mean Value Representations of Qudits
Authors:
Peter Adam,
Vladimir A. Andreev,
Margarita A. Man'ko,
Matyas Mechler,
Vladimir I. Man'ko
Abstract:
The quantizer-dequantizer formalism is developed for mean value and probability representation of qubits and qutrits. We derive the star-product kernels providing the possibility to derive explicit expressions of the associative product of the symbols of the density operators and quantum observables for qubits. We discuss an extension of the quantizer-dequantizer formalism associated with the prob…
▽ More
The quantizer-dequantizer formalism is developed for mean value and probability representation of qubits and qutrits. We derive the star-product kernels providing the possibility to derive explicit expressions of the associative product of the symbols of the density operators and quantum observables for qubits. We discuss an extension of the quantizer-dequantizer formalism associated with the probability and observable mean-value descriptions of quantum states for qudits.
△ Less
Submitted 14 December, 2019;
originally announced December 2019.
-
Hypericin: Single molecule spectroscopy of an active natural ingredient
Authors:
Quan Liu,
Frank Wackenhut,
Otto Hauler,
Miriam Scholz,
Pierre-Michel Adam,
Marc Brecht,
Alfred J. Meixner
Abstract:
Hypericin can be found in nature in Hypericum perforatum (St. John's Wort) and has become subject of intense biochemical research. Studies report of antidepressive, antineoplastic, antitumor and antiviral activity of hypericin. Among the variety of potential applications hypericin can be used as photosensitizer in photodynamic therapy (PDT), where it is brought into cancer cells and produces singl…
▽ More
Hypericin can be found in nature in Hypericum perforatum (St. John's Wort) and has become subject of intense biochemical research. Studies report of antidepressive, antineoplastic, antitumor and antiviral activity of hypericin. Among the variety of potential applications hypericin can be used as photosensitizer in photodynamic therapy (PDT), where it is brought into cancer cells and produces singlet oxygen upon irradiation with a suitable light source. Therefore, the photophysical properties of hypericin are crucial for a successful application in a medical treatment. Here, we present the first single molecule optical spectroscopy study of hypericin. Its photostability is large enough to obtain single molecule fluorescence, surface enhanced Raman spectra (SERS), fluorescence lifetime, antibunching and blinking dynamics. Embedding hypericin in a PVA matrix changes the blinking dynamics, reduces the fluorescence lifetime and increases the photostability. Single molecule SERS spectra show both the neutral and deprotonated form of hypericin and exhibit sudden spectral changes, which can be associated with a reorientation of the single molecule with respect to the surface.
△ Less
Submitted 9 October, 2019;
originally announced October 2019.
-
Learning deep representations for video-based intake gesture detection
Authors:
Philipp V. Rouast,
Marc T. P. Adam
Abstract:
Automatic detection of individual intake gestures during eating occasions has the potential to improve dietary monitoring and support dietary recommendations. Existing studies typically make use of on-body solutions such as inertial and audio sensors, while video is used as ground truth. Intake gesture detection directly based on video has rarely been attempted. In this study, we address this gap…
▽ More
Automatic detection of individual intake gestures during eating occasions has the potential to improve dietary monitoring and support dietary recommendations. Existing studies typically make use of on-body solutions such as inertial and audio sensors, while video is used as ground truth. Intake gesture detection directly based on video has rarely been attempted. In this study, we address this gap and show that deep learning architectures can successfully be applied to the problem of video-based detection of intake gestures. For this purpose, we collect and label video data of eating occasions using 360-degree video of 102 participants. Applying state-of-the-art approaches from video action recognition, our results show that (1) the best model achieves an $F_1$ score of 0.858, (2) appearance features contribute more than motion features, and (3) temporal context in form of multiple video frames is essential for top model performance.
△ Less
Submitted 23 September, 2019;
originally announced September 2019.
-
Deep Learning for Human Affect Recognition: Insights and New Developments
Authors:
Philipp V. Rouast,
Marc T. P. Adam,
Raymond Chiong
Abstract:
Automatic human affect recognition is a key step towards more natural human-computer interaction. Recent trends include recognition in the wild using a fusion of audiovisual and physiological sensors, a challenging setting for conventional machine learning algorithms. Since 2010, novel deep learning algorithms have been applied increasingly in this field. In this paper, we review the literature on…
▽ More
Automatic human affect recognition is a key step towards more natural human-computer interaction. Recent trends include recognition in the wild using a fusion of audiovisual and physiological sensors, a challenging setting for conventional machine learning algorithms. Since 2010, novel deep learning algorithms have been applied increasingly in this field. In this paper, we review the literature on human affect recognition between 2010 and 2017, with a special focus on approaches using deep neural networks. By classifying a total of 950 studies according to their usage of shallow or deep architectures, we are able to show a trend towards deep learning. Reviewing a subset of 233 studies that employ deep neural networks, we comprehensively quantify their applications in this field. We find that deep learning is used for learning of (i) spatial feature representations, (ii) temporal feature representations, and (iii) joint feature representations for multimodal sensor data. Exemplary state-of-the-art architectures illustrate the progress. Our findings show the role deep architectures will play in human affect recognition, and can serve as a reference point for researchers working on related applications.
△ Less
Submitted 9 January, 2019;
originally announced January 2019.
-
Single step quantum state engineering in traveling optical fields
Authors:
Gabor Mogyorosi,
Peter Adam,
Emese Molnar,
Matyas Mechler
Abstract:
We propose a general experimental quantum state engineering scheme for the high-fidelity conditional generation of a large variety of nonclassical states of traveling optical fields. It contains a single measurement, thereby achieving a high success probability. The generated state is encoded in the optimal choice of the physically controllable parameters of the arrangement. These parameter values…
▽ More
We propose a general experimental quantum state engineering scheme for the high-fidelity conditional generation of a large variety of nonclassical states of traveling optical fields. It contains a single measurement, thereby achieving a high success probability. The generated state is encoded in the optimal choice of the physically controllable parameters of the arrangement. These parameter values are determined via numerical optimization.
△ Less
Submitted 18 August, 2018; v1 submitted 21 April, 2018;
originally announced April 2018.
-
Plasmon-enhanced second harmonic sensing
Authors:
Lavinia Ghirardini,
Anne-Laure Baudrion,
Marco Monticelli,
Daniela Petti,
Paolo Biagioni,
Lamberto Duò,
Giovanni Pellegrini,
Pierre-Michel Adam,
Marco Finazzi,
Michele Celebrano
Abstract:
It has been recently suggested that the nonlinear optical processes in plasmonic nanoantennas allow for a substantial boost in the sensitivity of plasmonic sensing platforms. Here we present a sensing device based on an array of non-centrosymmetric plasmonic nanoantennas featuring enhanced second harmonic generation (SHG) integrated in a microfluidic chip. We evaluate its sensitivity both in the l…
▽ More
It has been recently suggested that the nonlinear optical processes in plasmonic nanoantennas allow for a substantial boost in the sensitivity of plasmonic sensing platforms. Here we present a sensing device based on an array of non-centrosymmetric plasmonic nanoantennas featuring enhanced second harmonic generation (SHG) integrated in a microfluidic chip. We evaluate its sensitivity both in the linear and nonlinear regime using a figure of merit (FOM = $(ΔI/I)/Δn$) that accounts for the relative change in the measured intensity, \textit{I}, against the variation of the environmental refractive index \textit{n}. While the signal-to-noise ratio achieved in both regimes allows the detection of a minimum refractive index variation $Δn_{min} \approx 10^{-3}$, the platform operation in the nonlinear regime features a sensitivity (i.e. the FOM) that is at least 3 times higher than the linear one. Thanks to the surface sensitivity of plasmon-enhanced SHG, our results show that the development of such SHG sensing platforms with sensitivity performances exceeding those of their linear counterparts is within reach.
△ Less
Submitted 15 November, 2017;
originally announced November 2017.
-
Quantum state engineering via coherent-state superpositions in traveling optical fields
Authors:
Emese Molnar,
Peter Adam,
Gabor Mogyorosi,
Matyas Mechler
Abstract:
We propose two experimental schemes for producing coherent-state superpositions which approximate different nonclassical states conditionally in traveling optical fields. Although these setups are constructed of a small number of linear optical elements and homodyne measurements, they can be used to generate various photon number superpositions in which the number of constituent states can be high…
▽ More
We propose two experimental schemes for producing coherent-state superpositions which approximate different nonclassical states conditionally in traveling optical fields. Although these setups are constructed of a small number of linear optical elements and homodyne measurements, they can be used to generate various photon number superpositions in which the number of constituent states can be higher than the number of measurements in the schemes. We determine numerically the parameters to achieve maximal fidelity of the preparation for a large variety of nonclassical states, such as amplitude squeezed states, squeezed number states, binomial states and various photon number superpositions. The proposed setups can generate these states with high fidelities and with success probabilities that can be promising for practical applications.
△ Less
Submitted 9 August, 2017;
originally announced August 2017.
-
Minimal sets of dequantizers and quantizers for finite-dimensional quantum systems
Authors:
P. Adam,
V. A. Andreev,
A. Isar,
M. A. Man'ko,
V. I. Man'ko
Abstract:
The problem of finding and characterizing minimal sets of dequantizers and quantizers applied in the mapping of operators onto functions is considered, for finite-dimensional quantum systems. The general properties of such sets are determined. An explicit description of all the minimum self-dual sets of dequantizers and quantizers for a qubit system is derived. The connection between some known se…
▽ More
The problem of finding and characterizing minimal sets of dequantizers and quantizers applied in the mapping of operators onto functions is considered, for finite-dimensional quantum systems. The general properties of such sets are determined. An explicit description of all the minimum self-dual sets of dequantizers and quantizers for a qubit system is derived. The connection between some known sets of dequantizers and quantizers and the derived formulae is presented.
△ Less
Submitted 27 September, 2016;
originally announced September 2016.
-
Optimization of periodic single-photon sources based on combined multiplexing
Authors:
Ferenc Bodog,
Peter Adam,
Matyas Mechler,
Imre Santa,
Matyas Koniorczyk
Abstract:
We consider periodic single-photon sources with combined multiplexing in which the outputs of several time-multiplexed sources are spatially multiplexed. We give a full statistical description of such systems in order to optimize them with respect to maximal single-photon probability. We carry out the optimization for a particular scenario which can be realized in bulk optics and its expected perf…
▽ More
We consider periodic single-photon sources with combined multiplexing in which the outputs of several time-multiplexed sources are spatially multiplexed. We give a full statistical description of such systems in order to optimize them with respect to maximal single-photon probability. We carry out the optimization for a particular scenario which can be realized in bulk optics and its expected performance is potentially the best at the present state of the art. We find that combined multiplexing outperforms purely spatially or time multiplexed sources for certain parameters only, and we characterize these cases. Combined multiplexing can have the advantages of possibly using less nonlinear sources, achieving higher repetition rates, and the potential applicability for continuous pumping. We estimate an achievable single-photon probability between 85% and 89%.
△ Less
Submitted 8 July, 2016;
originally announced July 2016.
-
Phonon-Plasmon Interaction in Metal-Insulator-Metal Localized Surface Plasmon Systems
Authors:
Abdelali Mrabti,
Gaëtan Lévêque,
Rana Nicolas,
Thomas Maurer,
Pierre-Michel Adam,
Abdellatif Akjouj,
Yan Pennec,
Bahram Djafari-Rouhani
Abstract:
We investigate theoretically and numerically the coupling between elastic and localized surface plasmon modes in a system of gold nanocylinders separated from a thin gold film by a dielectric spacer of few nanometers thickness. That system supports plasmon modes confined in between the bottom of the nanocylinder and the top of the gold film, which arise from the formation of interference patterns…
▽ More
We investigate theoretically and numerically the coupling between elastic and localized surface plasmon modes in a system of gold nanocylinders separated from a thin gold film by a dielectric spacer of few nanometers thickness. That system supports plasmon modes confined in between the bottom of the nanocylinder and the top of the gold film, which arise from the formation of interference patterns by short-wavelength metal-insulator-metal propagating plasmon. First we present the plasmonic properties of the system though computer-simulated extinction spectra and field maps associated to the different optical modes. Next a simple analytical model is introduced, which allows to correctly reproduce the shape and wavelengths of the plasmon modes. This model is used to investigate the efficiency of the coupling between an elastic deformation and the plasmonic modes. In the last part of the paper, we present the full numerical simulations of the phononic properties of the system, and then compute the acousto-plasmonic coupling between the different plasmon modes and five acoustic modes of very different shape. The efficiency of the coupling is assessed first by evaluating the modulation of the resonance wavelength, which allows comparison with the analytical model, and finally in term of time-modulation of the transmission spectra on the full visible range, computed for realistic values of the deformation of the nanoparticle.
△ Less
Submitted 1 June, 2016;
originally announced June 2016.
-
Direct measurement of interfacial Dzyaloshinskii-Moriya interaction in X/CoFeB/MgO heterostructures with a scanning-NV magnetometer
Authors:
I. Gross,
L. J. Martínez,
J. -P. Tetienne,
T. Hingant,
J. -F. Roch,
K. Garcia,
R. Soucaille,
J. P. Adam,
J. -V. Kim,
S. Rohart,
A. Thiaville,
J. Torrejon,
M. Hayashi,
V. Jacques
Abstract:
The Dzyaloshinskii-Moriya Interaction (DMI) has recently attracted considerable interest owing to its fundamental role in the stabilization of chiral spin textures in ultrathin ferromagnets, which are interesting candidates for future spintronic technologies. Here we employ a scanning nano-magnetometer based on a single nitrogen-vacancy (NV) defect in diamond to locally probe the strength of the i…
▽ More
The Dzyaloshinskii-Moriya Interaction (DMI) has recently attracted considerable interest owing to its fundamental role in the stabilization of chiral spin textures in ultrathin ferromagnets, which are interesting candidates for future spintronic technologies. Here we employ a scanning nano-magnetometer based on a single nitrogen-vacancy (NV) defect in diamond to locally probe the strength of the interfacial DMI in CoFeB/MgO ultrathin films grown on different heavy metal underlayers X=Ta,TaN, and W. By measuring the stray field emanating from DWs in micron-long wires of such materials, we observe deviations from the Bloch profile for TaN and W underlayers that are consistent with a positive DMI value favoring right-handed chiral spin structures. Moreover, our measurements suggest that the DMI constant might vary locally within a single sample, illustrating the importance of local probes for the study of magnetic order at the nanoscale.
△ Less
Submitted 23 May, 2016;
originally announced May 2016.
-
Double self-Kerr scheme for optical Schrödinger-cat state preparation
Authors:
P. Adam,
Z. Darázs,
T. Kiss,
M. Mechler
Abstract:
We propose a scheme to prepare optical Schrödinger-cat states in a traveling wave setting. Two states are similarly prepared via the self-Kerr effect and after mixing them, one mode is measured by homodyne detection. In the other mode a superposition of coherent states is conditionally prepared. The advantage of the scheme is that assuming a small Kerr effect one can prepare with high probability…
▽ More
We propose a scheme to prepare optical Schrödinger-cat states in a traveling wave setting. Two states are similarly prepared via the self-Kerr effect and after mixing them, one mode is measured by homodyne detection. In the other mode a superposition of coherent states is conditionally prepared. The advantage of the scheme is that assuming a small Kerr effect one can prepare with high probability one from a set of Schrödinger-cat states. The measured value of the quadrature provides the information, which state from the set is actually prepared.
△ Less
Submitted 20 November, 2015;
originally announced November 2015.
-
Conditional generation of optical Schrödinger cat states
Authors:
P. Adam,
T. Kiss,
Z. Darázs,
I. Jex
Abstract:
Given a source of two coherent state superpositions with small separation in a traveling wave optical setting, we show that by interference and balanced homodyne measurement it is possible to conditionally prepare a symmetrically placed superposition of coherent states around the origo of the phase space. The separation of the coherent states in the superposition will be amplified during the proce…
▽ More
Given a source of two coherent state superpositions with small separation in a traveling wave optical setting, we show that by interference and balanced homodyne measurement it is possible to conditionally prepare a symmetrically placed superposition of coherent states around the origo of the phase space. The separation of the coherent states in the superposition will be amplified during the process.
△ Less
Submitted 20 November, 2015;
originally announced November 2015.
-
Construction of quantum states by special superpositions of coherent states
Authors:
P. Adam,
E. Molnar,
G. Mogyorosi,
A. Varga,
M. Mechler,
J. Janszky
Abstract:
We consider the optimal approximation of certain quantum states of a harmonic oscillator with the superposition of a finite number of coherent states in phase space placed either on an ellipse or on a certain lattice. These scenarios are currently experimentally feasible. The parameters of the ellipse and the lattice and the coefficients of the constituent coherent states are optimized numerically…
▽ More
We consider the optimal approximation of certain quantum states of a harmonic oscillator with the superposition of a finite number of coherent states in phase space placed either on an ellipse or on a certain lattice. These scenarios are currently experimentally feasible. The parameters of the ellipse and the lattice and the coefficients of the constituent coherent states are optimized numerically, via a genetic algorithm, in order to obtain the best approximation. It is found that for certain quantum states the obtained approximation is better than the ones known from the literature thus far.
△ Less
Submitted 25 November, 2014;
originally announced November 2014.
-
Optimization of periodic single-photon sources
Authors:
Peter Adam,
Matyas Mechler,
Imre Santa,
Mátyás Koniorczyk
Abstract:
We introduce a theoretical framework which is suitable for the description of all spatial and time-multiplexed periodic single-photon sources realized or proposed thus far. Our model takes into account all possibly relevant loss mechanisms. This statistical analysis of the known schemes shows that multiplexing systems can be optimized in order to produce maximal single-photon probability for vario…
▽ More
We introduce a theoretical framework which is suitable for the description of all spatial and time-multiplexed periodic single-photon sources realized or proposed thus far. Our model takes into account all possibly relevant loss mechanisms. This statistical analysis of the known schemes shows that multiplexing systems can be optimized in order to produce maximal single-photon probability for various sets of loss parameters by the appropriate choice of the number of multiplexed units of spatial multiplexers or multiplexed time intervals and the input mean photon pair number, and reveals the physical reasons of the existence of the optimum. We propose a novel time-multiplexed scheme to be realized in bulk optics, which, according to the present analysis, would have promising performance when experimentally realized. It could provide a single-photon probability of 85\% with a choice of experimental parameters which are feasible according to the experiments known from the literature.
△ Less
Submitted 14 August, 2014;
originally announced August 2014.
-
Understanding deviations from ray optics at curved interfaces
Authors:
Pia Adam,
Jakob Kreismann,
Martina Hentschel
Abstract:
Ray optics is a useful tool even in the regime where, actually, full wave-calculations would be appropriate. However, wave-inspired adjustments are needed to ensure the accuracy of ray-based predictions. These corrections are known as the Goos-Hänchen shift, a lateral shift along the interface, and the Fresnel filtering effect, an angular shift, that violates Snell's law and the principle of ray-p…
▽ More
Ray optics is a useful tool even in the regime where, actually, full wave-calculations would be appropriate. However, wave-inspired adjustments are needed to ensure the accuracy of ray-based predictions. These corrections are known as the Goos-Hänchen shift, a lateral shift along the interface, and the Fresnel filtering effect, an angular shift, that violates Snell's law and the principle of ray-path reversibility. Whereas they are well established at planar interfaces, an accurate description of microlasers and other microoptics devices requires their precise knowledge at the curved boundaries characteristic for these devices. Here, we present analytical and numerical results that highlight the role of boundary curvature and show the clear deviations from the planar case. We introduce an intuitive picture that allows for a straightforward understanding why Fresnel filtering grows considerably with curvature whereas the Goos-Hänchen shift becomes less important.
△ Less
Submitted 24 July, 2014;
originally announced July 2014.
-
Single step synthesis and organization of gold colloids assisted by copolymer templates
Authors:
Aurelien Sarrazin,
Arthur Gontier,
Alexandre Plaud,
Jeremie Beal,
Helene Yockell-Lelievre,
Jean-Louis Bijeon,
Jerome Plain,
Pierre-Michel Adam,
Thomas Maurer
Abstract:
We report here an original single-step process for synthesis and self-organization of gold colloids by simply incorporating gold salts into a solution prepared with Polystyrene (PS) - Polymethylmethacrylate (PMMA) copolymer, thiolated PS and Propylene Glycol Methyl Ether Acetate (PGMEA) as solvent. The spin-coating and annealing of this solution allows then the formation of PS domains. Depending o…
▽ More
We report here an original single-step process for synthesis and self-organization of gold colloids by simply incorporating gold salts into a solution prepared with Polystyrene (PS) - Polymethylmethacrylate (PMMA) copolymer, thiolated PS and Propylene Glycol Methyl Ether Acetate (PGMEA) as solvent. The spin-coating and annealing of this solution allows then the formation of PS domains. Depending on the polymer concentration of the as-prepared solution, there can be either one or several gold nanoparticles (NPs) per PS domains. For high concentration of gold nanoparticles in PS domains, the coupling between plasmonic nanoparticles leads to the observation of second peak in the optical extinction spectrum. Such collective effect could be relevant for the development of optical strain sensors in the next future.
△ Less
Submitted 31 March, 2014;
originally announced March 2014.
-
Wigner functions and spin tomograms for qubit states
Authors:
Peter Adam,
Vladimir A. Andreev,
Iulia Ghiu,
Aurelian Isar,
Margarita A. Man'ko,
Vladimir I. Man'ko
Abstract:
We establish the relation of the spin tomogram to the Wigner function on a discrete phase space of qubits. We use the quantizers and dequantizers of the spin tomographic star-product scheme for qubits to derive the expression for the kernel connecting Wigner symbols on the discrete phase space with the tomographic symbols.
We establish the relation of the spin tomogram to the Wigner function on a discrete phase space of qubits. We use the quantizers and dequantizers of the spin tomographic star-product scheme for qubits to derive the expression for the kernel connecting Wigner symbols on the discrete phase space with the tomographic symbols.
△ Less
Submitted 24 December, 2013;
originally announced December 2013.
-
Enhancing LSPR sensitivity of Au gratings through graphene coupling to Au film
Authors:
T. Maurer,
R. Nicolas,
G. Lévêque,
P. Subramanian,
J. Proust,
J. Béal,
S. Schuermans,
J. -P. Vilcot,
Z. Herro,
M. Kazan,
J. Plain,
R. Boukherroub,
A. Akjouj,
B. Djafari-Rouhani,
P. -M. Adam,
S. Szunerits
Abstract:
A particular interesting plasmonic system is that of metallic nanostructures interacting with metal films. As the LSPR behavior of gold nanostructures (Au NPs) on the top of a gold thin film is exquisitely sensitive to the spacer distance of the film-Au NPs, we investigate in the present work the influence of a few-layered graphene spacer on the LSPR behavior of the NPs. The idea is to evidence th…
▽ More
A particular interesting plasmonic system is that of metallic nanostructures interacting with metal films. As the LSPR behavior of gold nanostructures (Au NPs) on the top of a gold thin film is exquisitely sensitive to the spacer distance of the film-Au NPs, we investigate in the present work the influence of a few-layered graphene spacer on the LSPR behavior of the NPs. The idea is to evidence the role of few-layered graphene as one of the thinnest possible spacer. We first show that the coupling to the Au film induces a strong lowering at around 507nm and sharpening of the main LSPR of the Au NPs. Moreover, a blue shift in the main LSP resonance of about 13 nm is observed in the presence of a few-layered graphene spacer when compared to the case where gold nanostructures are directly linked to a gold thin film. Numerical simulations suggest that this LSP mode is dipolar and that the hot spots of the electric field are pushed to the top corners of the NPs, which makes it very sensitive to surrounding medium optical index changes and thus appealing for sensing applications. A figure of merit (FoM) of such a system (gold/graphene/ Au NPs) is 2.8, as compared to 2.1 for gold/Au NPs either a 33% sensitivity gain and opens up new sensing strategies.
△ Less
Submitted 19 November, 2013;
originally announced November 2013.
-
Copolymer template control of gold nanoparticle synthesis via thermal annealing
Authors:
A. Plaud,
A. Sarrazin,
J. Béal,
J. Proust,
P. Royer,
J. -L. Bijeon,
J. Plain,
P. -M. Adam,
T. Maurer
Abstract:
We present here an original process combining top-down and bottom-up approaches by annealing a thin gold film evaporated onto a hole template made by etching a PS-PMMA copolymer film. Such process allows a better control of the gold nanoparticle size distribution which provides a sharper localized surface plasmon resonance. This makes such route appealing for sensing applications since the figure…
▽ More
We present here an original process combining top-down and bottom-up approaches by annealing a thin gold film evaporated onto a hole template made by etching a PS-PMMA copolymer film. Such process allows a better control of the gold nanoparticle size distribution which provides a sharper localized surface plasmon resonance. This makes such route appealing for sensing applications since the figure of merit of the Au nanoparticles obtained after thermal evaporation is more than doubled. Such process could besides allow tuning the localized surface plasmon resonance by using copolymer with various molecular weights and thus be attractive for surface enhanced raman spectroscopy.
△ Less
Submitted 31 October, 2013;
originally announced October 2013.
-
Measurement of magnetization using domain compressibility in CoFeB films with perpendicular anisotropy
Authors:
N. Vernier,
J. P. Adam,
S. Eimer,
G. Agnus,
T. Devolder,
T. Hauet,
B. Ockert,
D. Ravelosona
Abstract:
We present a method to map the saturation magnetization of soft ultrathin films with perpendicular anisotropy, and we illustrate it to assess the compositional dependence of the magnetization of CoFeB(1 nm)/MgO films. The method relies on the measurement of the dipolar repulsion of parallel domain walls that define a linear domain. The film magnetization is linked to the field compressibility of t…
▽ More
We present a method to map the saturation magnetization of soft ultrathin films with perpendicular anisotropy, and we illustrate it to assess the compositional dependence of the magnetization of CoFeB(1 nm)/MgO films. The method relies on the measurement of the dipolar repulsion of parallel domain walls that define a linear domain. The film magnetization is linked to the field compressibility of the domain. The method also yields the minimal distance between two walls before their merging, which sets a practical limit to the storage density in spintronic devices using domain walls as storage entities.
△ Less
Submitted 24 July, 2013;
originally announced July 2013.
-
Optical determination and identification of organic shells around nanoparticles: application to silver nanoparticles
Authors:
T. Maurer,
N. Abdellaoui,
A. Gwiazda,
P. -M. Adam,
A. Vial,
J. -L. Bijeon,
D. Chaumont,
M. Bourezzou
Abstract:
We present a simple method to prove the presence of an organic shell around silver nanoparticles. This method is based on the comparison between optical extinction measurements of isolated nanoparticles and Mie calculations predicting the expected wavelength of the Localized Surface Plasmon Resonance of the nanoparticles with and without the presence of an organic layer. This method was applied to…
▽ More
We present a simple method to prove the presence of an organic shell around silver nanoparticles. This method is based on the comparison between optical extinction measurements of isolated nanoparticles and Mie calculations predicting the expected wavelength of the Localized Surface Plasmon Resonance of the nanoparticles with and without the presence of an organic layer. This method was applied to silver nanoparticles which seemed to be well protected from oxidation. Further experimental characterization via Surface Enhanced Raman Spectroscopy (SERS) measurements allowed to identify this protective shell as ethylene glycol. Combining LSPR and SERS measurements could thus give proof of both presence and identification for other plasmonic nanoparticles surrounded by organic shells.
△ Less
Submitted 26 April, 2013;
originally announced April 2013.
-
Optical identification of crystal defects in CCD matrix
Authors:
Popowicz Adam
Abstract:
An original idea of semiconductor defects identification in CCD matrix was presented in the article. The procedure is simple and easy to execute because of no need for special and expensive equipment. The method classifies defects into two groups: the point defects and the spatial defects (dislocations). During the experiments it was proven that the type of defect affects the behaviour of the dark…
▽ More
An original idea of semiconductor defects identification in CCD matrix was presented in the article. The procedure is simple and easy to execute because of no need for special and expensive equipment. The method classifies defects into two groups: the point defects and the spatial defects (dislocations). During the experiments it was proven that the type of defect affects the behaviour of the dark current generation during the light gathering .
△ Less
Submitted 26 February, 2013;
originally announced February 2013.
-
Theory of the conductance of interacting quantum wires with good contacts and applications to carbon nanotubes
Authors:
N. Sedlmayr,
P. Adam,
J. Sirker
Abstract:
Using bosonization we derive the dc conductance G(L,T) of an interacting quantum wire with good contacts including current relaxing backscattering and Umklapp processes. Our result yields the dependence of the conductance on length L and temperature T in the energy range where the Luttinger model is applicable. For a system where only a part of the current is protected by a conservation law we sur…
▽ More
Using bosonization we derive the dc conductance G(L,T) of an interacting quantum wire with good contacts including current relaxing backscattering and Umklapp processes. Our result yields the dependence of the conductance on length L and temperature T in the energy range where the Luttinger model is applicable. For a system where only a part of the current is protected by a conservation law we surprisingly find an unreduced ideal quantum conductance as for a fully ballistic wire. As a second application, we calculate the conductance of metallic single-wall carbon nanotubes in an energy range where backscattering due to phonons dominates. In contrast to previous studies we treat the electrons as interacting by using the Luttinger liquid formulation. The obtained results for the scaling of the dc conductance with temperature and length are compared with experimental data and yield a better description than the previously used non-interacting theory. Possible reasons for the remaining discrepancies in the temperature dependence between theory and experiment are discussed.
△ Less
Submitted 27 January, 2013; v1 submitted 25 October, 2012;
originally announced October 2012.
-
Universal covariant quantum cloning circuits for qubit entanglement manipulation
Authors:
Levente Szabo,
Matyas Koniorczyk,
Peter Adam,
Jozsef Janszky
Abstract:
We consider the entanglement manipulation capabilities of the universal covariant quantum cloner or quantum processor circuit for quantum bits. We investigate its use for cloning a member of a bipartite or a genuine tripartite entangled state of quantum bits. We find that for bipartite pure entangled states a nontrivial behavior of concurrence appears, while for GHZ entangled states a possibilit…
▽ More
We consider the entanglement manipulation capabilities of the universal covariant quantum cloner or quantum processor circuit for quantum bits. We investigate its use for cloning a member of a bipartite or a genuine tripartite entangled state of quantum bits. We find that for bipartite pure entangled states a nontrivial behavior of concurrence appears, while for GHZ entangled states a possibility of the partial extraction of bipartite entanglement can be achieved.
△ Less
Submitted 23 November, 2009;
originally announced November 2009.
-
Domain wall mobility, stability and Walker breakdown in magnetic nanowires
Authors:
A. Mougin,
M. Cormier,
J. P. Adam,
P. J. Metaxas,
J. Ferre
Abstract:
We present an analytical calculation of the velocity of a single 180 degree domain wall in a magnetic structure with reduced thickness and/or lateral dimension under the combined action of an external applied magnetic field and an electrical current. As for the case of field-induced domain wall propagation in thick films, two motion regimes with different mobilities are obtained, below and far a…
▽ More
We present an analytical calculation of the velocity of a single 180 degree domain wall in a magnetic structure with reduced thickness and/or lateral dimension under the combined action of an external applied magnetic field and an electrical current. As for the case of field-induced domain wall propagation in thick films, two motion regimes with different mobilities are obtained, below and far above the so-called Walker field. Additionally, for the case of current induced motion, a Walker-like current density threshold can be defined. When the dimensions of the system become comparable to the domain wall width, the threshold field and current density, stating the wall's internal structure stability, are reduced by the same geometrical demagnetising factor which accounts for the confinement. This points out the fact that the velocity dependence over an extended field/current range and the knowledge of the Walker breakdown are mandatory to draw conclusions about the phenomenological Gilbert damping parameter tuning the magnetisation dynamics.
△ Less
Submitted 21 February, 2007;
originally announced February 2007.
-
General criterion for oblivious remote state preparation
Authors:
Z. Kurucz,
P. Adam,
J. Janszky
Abstract:
A necessary and sufficient condition is given for general exact remote state preparation (RSP) protocols to be oblivious, that is, no information about the target state can be retrieved from the classical message. A novel criterion in terms of commutation relations is also derived for the existence of deterministic exact protocols in which Alice's measurement eigenstates are related to each othe…
▽ More
A necessary and sufficient condition is given for general exact remote state preparation (RSP) protocols to be oblivious, that is, no information about the target state can be retrieved from the classical message. A novel criterion in terms of commutation relations is also derived for the existence of deterministic exact protocols in which Alice's measurement eigenstates are related to each other by fixed linear operators similar to Bob's unitaries. For non-maximally entangled resources, it provides an easy way to search for RSP protocols. As an example, we show how to reduce the case of partially entangled resources to that of maximally entangled ones, and we construct RSP protocols exploiting the structure of the irreducible representations of Abelian groups.
△ Less
Submitted 5 May, 2006;
originally announced May 2006.
-
Entanglement criteria based on local uncertainty relations are strictly stronger than the computable cross norm criterion
Authors:
Otfried Gühne,
Matyas Mechler,
Geza Toth,
Peter Adam
Abstract:
We show that any state which violates the computable cross norm (or realignment) criterion for separability also violates the separability criterion of the local uncertainty relations. The converse is not true. The local uncertainty relations provide a straightforward construction of nonlinear entanglement witnesses for the cross norm criterion.
We show that any state which violates the computable cross norm (or realignment) criterion for separability also violates the separability criterion of the local uncertainty relations. The converse is not true. The local uncertainty relations provide a straightforward construction of nonlinear entanglement witnesses for the cross norm criterion.
△ Less
Submitted 15 June, 2006; v1 submitted 10 April, 2006;
originally announced April 2006.
-
Continuous variable remote state preparation
Authors:
Z. Kurucz,
P. Adam,
Z. Kis,
J. Janszky
Abstract:
We extend exact deterministic remote state preparation (RSP) with minimal classical communication to quantum systems of continuous variables. We show that, in principle, it is possible to remotely prepare states of an ensemble that is parameterized by infinitely many real numbers, i.e., by a real function, while the classical communication cost is one real number only. We demonstrate continuous…
▽ More
We extend exact deterministic remote state preparation (RSP) with minimal classical communication to quantum systems of continuous variables. We show that, in principle, it is possible to remotely prepare states of an ensemble that is parameterized by infinitely many real numbers, i.e., by a real function, while the classical communication cost is one real number only. We demonstrate continuous variable RSP in three examples using (i) quadrature measurement and phase space displacement operations, (ii) measurement of the optical phase and unitaries shifting the same, and (iii) photon counting and photon number shift.
△ Less
Submitted 11 October, 2005;
originally announced October 2005.
-
Engineering mixed states in a degenerate four-state system
Authors:
Attila Karpati,
Zsolt Kis,
Peter Adam
Abstract:
A method is proposed for preparing any pure and a wide class of mixed quantum states in the decoherence-free ground-state subspace of a degenerate multilevel lambda system. The scheme is a combination of optical pumping and a series of coherent excitation processes, and for a given pulse sequence the same final state is obtained regardless of the initial state of the system. The method is robust…
▽ More
A method is proposed for preparing any pure and a wide class of mixed quantum states in the decoherence-free ground-state subspace of a degenerate multilevel lambda system. The scheme is a combination of optical pumping and a series of coherent excitation processes, and for a given pulse sequence the same final state is obtained regardless of the initial state of the system. The method is robust with respect to the fluctuation of the pulse areas, like in adiabatic methods, however, the field amplitude can be adjusted in a larger range.
△ Less
Submitted 11 December, 2004;
originally announced December 2004.
-
Competitive stochastic noises in coherently driven two-level atoms and quantum interference
Authors:
P. Adam,
A. Karpati,
W. Gawlik,
J. Janszky
Abstract:
A system of coherently-driven two-level atoms is analyzed in presence of two independent stochastic perturbations: one due to collisions and a second one due to phase fluctuations of the driving field. The behaviour of the quantum interference induced by the collisional noise is considered in detail. The quantum-trajectory method is utilized to reveal the phase correlations between the dressed s…
▽ More
A system of coherently-driven two-level atoms is analyzed in presence of two independent stochastic perturbations: one due to collisions and a second one due to phase fluctuations of the driving field. The behaviour of the quantum interference induced by the collisional noise is considered in detail. The quantum-trajectory method is utilized to reveal the phase correlations between the dressed states involved in the interfering transition channels. It is shown that the quantum interference induced by the collisional noise is remarkably robust against phase noise. This effect is due to the fact that the phase noise, similarly to collisions, stabilizes the phase-difference between the dressed states.
△ Less
Submitted 20 February, 2003;
originally announced February 2003.
-
Quantum trajectory approach to stochastically-induced quantum interference effects in coherently-driven two-level atoms
Authors:
A. Karpati,
P. Adam,
W. Gawlik,
B. Lobodzinski,
J. Janszky
Abstract:
Stochastic perturbation of two-level atoms strongly driven by a coherent light field is analyzed by the quantum trajectory method. A new method is developed for calculating the resonance fluorescence spectra from numerical simulations. It is shown that in the case of dominant incoherent perturbation, the stochastic noise can unexpectedly create phase correlation between the neighboring atomic dr…
▽ More
Stochastic perturbation of two-level atoms strongly driven by a coherent light field is analyzed by the quantum trajectory method. A new method is developed for calculating the resonance fluorescence spectra from numerical simulations. It is shown that in the case of dominant incoherent perturbation, the stochastic noise can unexpectedly create phase correlation between the neighboring atomic dressed states. This phase correlation is responsible for quantum interference between the related transitions resulting in anomalous modifications of the resonance fluorescence spectra.
△ Less
Submitted 2 July, 2002;
originally announced July 2002.
-
Simulation of Markovian quantum dynamics on quantum logic networks
Authors:
Matyas Koniorczyk,
Vladimir Buzek,
Peter Adam,
Akos Laszlo
Abstract:
We study how generators of Markovian dynamics of a qubit can be simulated using a programmable quantum processor.
We study how generators of Markovian dynamics of a qubit can be simulated using a programmable quantum processor.
△ Less
Submitted 4 April, 2005; v1 submitted 2 May, 2002;
originally announced May 2002.