-
In-situ Synchrotron X-Ray Photoelectron Spectroscopy Study of Medium-Temperature Baking of Niobium for SRF Application
Authors:
Alena Prudnikava,
Yegor Tamashevich,
Anna Makarova,
Dmitry Smirnov,
Jens Knobloch
Abstract:
In the present work the chemical composition of niobium surface upon 200-400 °C baking similar to "medium-temperature baking" and "furnace baking" of cavities is explored in-situ by synchrotron X-ray photoelectron spectroscopy (XPS). Our findings imply that below the critical thickness of $Nb_2O_5$ layer (about 1 nm) niobium starts to interact actively with surface impurities, such as carbon and p…
▽ More
In the present work the chemical composition of niobium surface upon 200-400 °C baking similar to "medium-temperature baking" and "furnace baking" of cavities is explored in-situ by synchrotron X-ray photoelectron spectroscopy (XPS). Our findings imply that below the critical thickness of $Nb_2O_5$ layer (about 1 nm) niobium starts to interact actively with surface impurities, such as carbon and phosphorus. By studying the kinetics of the native oxide reduction, the activation energy and the rate-constant relation have been determined and used for the calculation of the oxygen-concentration depth profiles. It has been established that the controlled diffusion of oxygen when the native-oxide layer represents an oxygen source is realized at temperatures 200-300 °C, while at 400 °C the pentoxide is completely reduced and the doping level is determined by an ambient oxygen partial pressure. Fluorine (F to Nb atomic ratio is about 0.2) after the buffered chemical polishing was found to be incorporated into the surface layer probed by XPS (about 4.6 nm), and its concentration increased during the low-temperature baking (F/Nb up to 0.35 at 230 °C) and depleted at higher temperatures (F/Nb=0.11 at 400 °C). Thus, the influence of fluorine on the performance of mid-T baked, mild-baked (120 °C/48 h) and nitrogen-doped cavities must be considered. The possible role of fluorine in the educed $Nb^{+5}$ to $Nb^{+4}$ reaction under the impact of an X-ray beam at room temperature and during the thermal treatment is also discussed. The range of temperature and duration parameters of the thermal treatment at which the niobium surface would not be contaminated with impurities is determined for industrial applications.
△ Less
Submitted 8 February, 2024; v1 submitted 11 December, 2023;
originally announced December 2023.
-
Moderate temperature heat treatment of a niobium superconducting cavity without oven
Authors:
Yegor Tamashevich,
Alena Prudnikava,
Alexander Matveenko,
Jens Knobloch
Abstract:
We have demonstrated a possibility to perform a successful moderate-temperature (mid-T) heat treatment of a superconducting cavity directly in a cryostat. This method significantly reduces the number of operations required for Mid-T baking effect research. The data obtained indicate the possibility of baking the cavity directly in the cryomodule, allowing full use of the Mid-T baking effect in a r…
▽ More
We have demonstrated a possibility to perform a successful moderate-temperature (mid-T) heat treatment of a superconducting cavity directly in a cryostat. This method significantly reduces the number of operations required for Mid-T baking effect research. The data obtained indicate the possibility of baking the cavity directly in the cryomodule, allowing full use of the Mid-T baking effect in a real accelerator.
△ Less
Submitted 18 July, 2023;
originally announced July 2023.
-
A model to explain the Q-increase by moderate-temperature treatment in Nb SRF cavities
Authors:
Yegor Tamashevich,
Alena Prudnikava,
Jens Knobloch
Abstract:
It is well known that moderate temperature baking of niobium cavities can improve the surface resistance. Presently, it is believed that the diffusion of oxygen into the bulk, resulting in interstitial defects, is responsible for the change. In this note we propose that the damaged surface layer remaining after dissolution of the thin niobium pentoxide may in fact be the dominant contributor to th…
▽ More
It is well known that moderate temperature baking of niobium cavities can improve the surface resistance. Presently, it is believed that the diffusion of oxygen into the bulk, resulting in interstitial defects, is responsible for the change. In this note we propose that the damaged surface layer remaining after dissolution of the thin niobium pentoxide may in fact be the dominant contributor to the improved the cavity quality factor by strongly pinning trapped flux lines. We propose some of experiments to test this theory.
△ Less
Submitted 8 June, 2023;
originally announced June 2023.
