-
Initial operations of the Soft X-ray Imager onboard XRISM
Authors:
Hiromasa Suzuki,
Tomokage Yoneyama,
Shogo B. Kobayashi,
Hirofumi Noda,
Hiroyuki Uchida,
Kumiko K. Nobukawa,
Kouichi Hagino,
Koji Mori,
Hiroshi Tomida,
Hiroshi Nakajima,
Takaaki Tanaka,
Hiroshi Murakami,
Hideki Uchiyama,
Masayoshi Nobukawa,
Yoshiaki Kanemaru,
Yoshinori Otsuka,
Haruhiko Yokosu,
Wakana Yonemaru,
Hanako Nakano,
Kazuhiro Ichikawa,
Reo Takemoto,
Tsukasa Matsushima,
Marina Yoshimoto,
Mio Aoyagi,
Kohei Shima
, et al. (30 additional authors not shown)
Abstract:
XRISM (X-Ray Imaging and Spectroscopy Mission) is an astronomical satellite with the capability of high-resolution spectroscopy with the X-ray microcalorimeter, Resolve, and wide field-of-view imaging with the CCD camera, Xtend. The Xtend consists of the mirror assembly (XMA: X-ray Mirror Assembly) and detector (SXI: Soft X-ray Imager). The components of SXI include CCDs, analog and digital electr…
▽ More
XRISM (X-Ray Imaging and Spectroscopy Mission) is an astronomical satellite with the capability of high-resolution spectroscopy with the X-ray microcalorimeter, Resolve, and wide field-of-view imaging with the CCD camera, Xtend. The Xtend consists of the mirror assembly (XMA: X-ray Mirror Assembly) and detector (SXI: Soft X-ray Imager). The components of SXI include CCDs, analog and digital electronics, and a mechanical cooler. After the successful launch on September 6th, 2023 (UT) and subsequent critical operations, the mission instruments were turned on and set up. The CCDs have been kept at the designed operating temperature of $-110^\circ$C ~after the electronics and cooling system were successfully set up. During the initial operation phase, which continued for more than a month after the critical operations, we verified the observation procedure, stability of the cooling system, all the observation options with different imaging areas and/or timing resolutions, and operations for protection against South Atlantic Anomaly. We optimized the operation procedure and observation parameters including the cooler settings, imaging areas for the specific modes with higher timing resolutions, and event selection algorithm. We summarize our policy and procedure of the initial operations for SXI. We also report on a couple of issues we faced during the initial operations and lessons learned from them.
△ Less
Submitted 28 June, 2024;
originally announced June 2024.
-
Accurate determination of thermoelectric figure of merit using ac Harman method with a four-probe configuration
Authors:
Kenjiro Okawa,
Yasutaka. Amagai,
Norihiko Sakamoto,
Nobu-Hisa Kaneko
Abstract:
The ac Harman method has been used for the direct estimation of dimensionless thermoelectric figure of merit (zT) through ac/dc resistance measurements. However, accurate zT estimation with a four-probe configuration is difficult owing to the occurrence of a thermal phase-delay in the heat flow with a low frequency current. This study reports an exact solution for zT estimation by solving the heat…
▽ More
The ac Harman method has been used for the direct estimation of dimensionless thermoelectric figure of merit (zT) through ac/dc resistance measurements. However, accurate zT estimation with a four-probe configuration is difficult owing to the occurrence of a thermal phase-delay in the heat flow with a low frequency current. This study reports an exact solution for zT estimation by solving the heat conduction equation. The analysis can explain the reverse heat flow, which is the main source of the error in the four-probe configuration, and the experimentally obtained behavior of the frequency dependence of zT of (Bi,Sb)$_2$Te$_3$. Approximately 20 % of the error is caused by a thermal phase-delay, unless an appropriate current frequency and voltage-terminal position are chosen. Thus, an accurate zT evaluation using a four-probe configuration at any voltage terminal position is achieved. These findings can lead to interesting thermoelectric metrology and could serve as a powerful tool to search for promising thermoelectric materials.
△ Less
Submitted 1 April, 2024;
originally announced April 2024.
-
An instability result of Hamiltonian systems related to optimal swing-up control of a pendulum
Authors:
Noboru Sakamoto
Abstract:
This paper presents an instability result of Hamiltonian systems associated with optimal swing-up control for a pendulum. The systems possess weak (higher-order) instability at the initial point of the swing-up control, the analysis for which requires techniques from celestial mechanics. The obtained result may have relationships with the previously obtained numerical studies for the existence of…
▽ More
This paper presents an instability result of Hamiltonian systems associated with optimal swing-up control for a pendulum. The systems possess weak (higher-order) instability at the initial point of the swing-up control, the analysis for which requires techniques from celestial mechanics. The obtained result may have relationships with the previously obtained numerical studies for the existence of multiple locally optimal solutions and the non-existence conjecture of the optimal control.
△ Less
Submitted 24 March, 2024;
originally announced March 2024.
-
Information Entropy-based Camera Path Estimation for In-Situ Visualization
Authors:
Ken Iwata,
Naohisa Sakamoto,
Jorji Nonaka,
Chongke Bi
Abstract:
In-situ processing has widely been recognized as an effective approach for the visualization and analysis of large-scale simulation outputs from modern HPC systems. One of the most common approaches for batch-based in-situ visualization is the image- or video-based approach. In this kind of approach, a large number of rendered images are generated from different viewpoints at each time step and ha…
▽ More
In-situ processing has widely been recognized as an effective approach for the visualization and analysis of large-scale simulation outputs from modern HPC systems. One of the most common approaches for batch-based in-situ visualization is the image- or video-based approach. In this kind of approach, a large number of rendered images are generated from different viewpoints at each time step and has proven useful for detailed analysis of the main simulation results. However, during test runs and model calibration runs before the main simulation run, a quick overview might be sufficient and useful. In this work, we focused on selecting the viewpoints which provide as much information as possible by using information entropy to maximize the subsequent visual analysis task. However, by simply following the selected viewpoints at each of the visualization time steps will probably lead to a rapidly changing video, which can impact the understanding. Therefore, we have also worked on an efficient camera path estimation approach for connecting selected viewpoints, at regular intervals, to generate a smooth video. This resulting video is expected to assist in rapid understanding of the underlying simulation phenomena and can be helpful to narrow down the temporal region of interest to minimize the turnaround time during detailed visual exploration via image- or video-based visual analysis of the main simulation run. We implemented and evaluated the proposed approach using the OpenFOAM CFD application, on an x86-based Server and an ARM A64FX-based supercomputer (Fugaku), and we obtained positive evaluations from domain scientists.
△ Less
Submitted 30 January, 2023; v1 submitted 27 January, 2023;
originally announced January 2023.
-
The design and performance of the XL-Calibur anticoincidence shield
Authors:
N. K. Iyer,
M. Kiss,
M. Pearce,
T. -A. Stana,
H. Awaki,
R. G. Bose,
A. Dasgupta,
G. De Geronimo,
E. Gau,
T. Hakamata,
M. Ishida,
K. Ishiwata,
W. Kamogawa,
F. Kislat,
T. Kitaguchi,
H. Krawczynski,
L. Lisalda,
Y. Maeda,
H. Matsumoto,
A. Miyamoto,
T. Miyazawa,
T. Mizuno,
B. F. Rauch,
N. Rodriguez Cavero,
N. Sakamoto
, et al. (9 additional authors not shown)
Abstract:
The XL-Calibur balloon-borne hard X-ray polarimetry mission comprises a Compton-scattering polarimeter placed at the focal point of an X-ray mirror. The polarimeter is housed within a BGO anticoincidence shield, which is needed to mitigate the considerable background radiation present at the observation altitude of ~40 km. This paper details the design, construction and testing of the anticoincide…
▽ More
The XL-Calibur balloon-borne hard X-ray polarimetry mission comprises a Compton-scattering polarimeter placed at the focal point of an X-ray mirror. The polarimeter is housed within a BGO anticoincidence shield, which is needed to mitigate the considerable background radiation present at the observation altitude of ~40 km. This paper details the design, construction and testing of the anticoincidence shield, as well as the performance measured during the week-long maiden flight from Esrange Space Centre to the Canadian Northwest Territories in July 2022. The in-flight performance of the shield followed design expectations, with a veto threshold <100 keV and a measured background rate of ~0.5 Hz (20-40 keV). This is compatible with the scientific goals of the mission, where %-level minimum detectable polarisation is sought for a Hz-level source rate.
△ Less
Submitted 8 December, 2022;
originally announced December 2022.
-
Optimal Stabilization of Periodic Orbits
Authors:
Fabian Beck,
Noboru Sakamoto
Abstract:
In this contribution the optimal stabilization problem of periodic orbits is studied in a symplectic geometry setting. For this, the stable manifold theory for the point stabilization case is generalized to the case of periodic orbit stabilization. Sufficient conditions for the existence of a \gls{nhim} of the Hamiltonian system are derived. It is shown that the optimal control problem has a solut…
▽ More
In this contribution the optimal stabilization problem of periodic orbits is studied in a symplectic geometry setting. For this, the stable manifold theory for the point stabilization case is generalized to the case of periodic orbit stabilization. Sufficient conditions for the existence of a \gls{nhim} of the Hamiltonian system are derived. It is shown that the optimal control problem has a solution if the related periodic Riccati equation has a unique periodic solution. For the analysis of the stable and unstable manifold a coordinate transformation is used which is moving along the orbit. As an example, an optimal control problem is considered for a spring mass oscillator system, which should be stabilized at a certain energy level.
△ Less
Submitted 21 November, 2022;
originally announced November 2022.
-
Hamilton-Jacobi-Bellman equation of nonlinear optimal control problems with fractional discount rate
Authors:
Gou Nishida,
Takamatsu Takahiro,
Noboru Sakamoto
Abstract:
This paper derives the Hamilton-Jacobi-Bellman equation of nonlinear optimal control problems for cost functions with fractional discount rate from the Bellman's principle of optimality. The fractional discount rate is described by Mittag-Leffler function that can be considered as a generalized exponential function.
This paper derives the Hamilton-Jacobi-Bellman equation of nonlinear optimal control problems for cost functions with fractional discount rate from the Bellman's principle of optimality. The fractional discount rate is described by Mittag-Leffler function that can be considered as a generalized exponential function.
△ Less
Submitted 21 November, 2022;
originally announced November 2022.
-
Angular-based Edge Bundled Parallel Coordinates Plot for the Visual Analysis of Large Ensemble Simulation Data
Authors:
Keita Watanabe,
Naohisa Sakamoto,
Jorji Nonaka,
Yasumitsu Maejima
Abstract:
With the continuous increase in the computational power and resources of modern high-performance computing (HPC) systems, large-scale ensemble simulations have become widely used in various fields of science and engineering, and especially in meteorological and climate science. It is widely known that the simulation outputs are large time-varying, multivariate, and multivalued datasets which pose…
▽ More
With the continuous increase in the computational power and resources of modern high-performance computing (HPC) systems, large-scale ensemble simulations have become widely used in various fields of science and engineering, and especially in meteorological and climate science. It is widely known that the simulation outputs are large time-varying, multivariate, and multivalued datasets which pose a particular challenge to the visualization and analysis tasks. In this work, we focused on the widely used Parallel Coordinates Plot (PCP) to analyze the interrelations between different parameters, such as variables, among the members. However, PCP may suffer from visual cluttering and drawing performance with the increase on the data size to be analyzed, that is, the number of polylines. To overcome this problem, we present an extension to the PCP by adding Bézier curves connecting the angular distribution plots representing the mean and variance of the inclination of the line segments between parallel axes. The proposed Angular-based Parallel Coordinates Plot (APCP) is capable of presenting a simplified overview of the entire ensemble data set while maintaining the correlation information between the adjacent variables. To verify its effectiveness, we developed a visual analytics prototype system and evaluated by using a meteorological ensemble simulation output from the supercomputer Fugaku.
△ Less
Submitted 22 September, 2022;
originally announced September 2022.
-
Presolar stardust in asteroid Ryugu
Authors:
Jens Barosch,
Larry R. Nittler,
Jianhua Wang,
Conel M. O'D. Alexander,
Bradley T. De Gregorio,
Cécile Engrand,
Yoko Kebukawa,
Kazuhide Nagashima,
Rhonda M. Stroud,
Hikaru Yabuta,
Yoshinari Abe,
Jérôme Aléon,
Sachiko Amari,
Yuri Amelin,
Ken-ichi Bajo,
Laure Bejach,
Martin Bizzarro,
Lydie Bonal,
Audrey Bouvier,
Richard W. Carlson,
Marc Chaussidon,
Byeon-Gak Choi,
George D. Cody,
Emmanuel Dartois,
Nicolas Dauphas
, et al. (99 additional authors not shown)
Abstract:
We have conducted a NanoSIMS-based search for presolar material in samples recently returned from C-type asteroid Ryugu as part of JAXA's Hayabusa2 mission. We report the detection of all major presolar grain types with O- and C-anomalous isotopic compositions typically identified in carbonaceous chondrite meteorites: 1 silicate, 1 oxide, 1 O-anomalous supernova grain of ambiguous phase, 38 SiC, a…
▽ More
We have conducted a NanoSIMS-based search for presolar material in samples recently returned from C-type asteroid Ryugu as part of JAXA's Hayabusa2 mission. We report the detection of all major presolar grain types with O- and C-anomalous isotopic compositions typically identified in carbonaceous chondrite meteorites: 1 silicate, 1 oxide, 1 O-anomalous supernova grain of ambiguous phase, 38 SiC, and 16 carbonaceous grains. At least two of the carbonaceous grains are presolar graphites, whereas several grains with moderate C isotopic anomalies are probably organics. The presolar silicate was located in a clast with a less altered lithology than the typical extensively aqueously altered Ryugu matrix. The matrix-normalized presolar grain abundances in Ryugu are 4.8$^{+4.7}_{-2.6}$ ppm for O-anomalous grains, 25$^{+6}_{-5}$ ppm for SiC grains and 11$^{+5}_{-3}$ ppm for carbonaceous grains. Ryugu is isotopically and petrologically similar to carbonaceous Ivuna-type (CI) chondrites. To compare the in situ presolar grain abundances of Ryugu with CI chondrites, we also mapped Ivuna and Orgueil samples and found a total of SiC grains and 6 carbonaceous grains. No O-anomalous grains were detected. The matrix-normalized presolar grain abundances in the CI chondrites are similar to those in Ryugu: 23 $^{+7}_{-6}$ ppm SiC and 9.0$^{+5.3}_{-4.6}$ ppm carbonaceous grains. Thus, our results provide further evidence in support of the Ryugu-CI connection. They also reveal intriguing hints of small-scale heterogeneities in the Ryugu samples, such as locally distinct degrees of alteration that allowed the preservation of delicate presolar material.
△ Less
Submitted 16 August, 2022;
originally announced August 2022.
-
Chiral symmetry restoration at high matter density observed in pionic atoms
Authors:
Takahiro Nishi,
Kenta Itahashi,
DeukSoon Ahn,
Georg P. A. Berg,
Masanori Dozono,
Daijiro Etoh,
Hiroyuki Fujioka,
Naoki Fukuda,
Nobuhisa Fukunishi,
Hans Geissel,
Emma Haettner,
Tadashi Hashimoto,
Ryugo S. Hayano,
Satoru Hirenzaki,
Hiroshi Horii,
Natsumi Ikeno,
Naoto Inabe,
Masahiko Iwasaki,
Daisuke Kameda,
Keichi Kisamori,
Yu Kiyokawa,
Toshiyuki Kubo,
Kensuke Kusaka,
Masafumi Matsushita,
Shin'ichiro Michimasa
, et al. (23 additional authors not shown)
Abstract:
Modern theories of physics tell that the vacuum is not an empty space. Hidden in the vacuum is a structure of anti-quarks $\bar{q}$ and quarks $q$. The $\bar{q}$ and $q$ pair has the same quantum number as the vacuum and condensates in it since the strong interaction of the quantum chromodynamics (QCD) is too strong to leave it empty. The $\bar{q}q$ condensation breaks the chiral symmetry of the v…
▽ More
Modern theories of physics tell that the vacuum is not an empty space. Hidden in the vacuum is a structure of anti-quarks $\bar{q}$ and quarks $q$. The $\bar{q}$ and $q$ pair has the same quantum number as the vacuum and condensates in it since the strong interaction of the quantum chromodynamics (QCD) is too strong to leave it empty. The $\bar{q}q$ condensation breaks the chiral symmetry of the vacuum. The expectation value $<\bar{q}q>$ is an order parameter. For higher temperature or higher matter-density, $|<\bar{q}q>|$ decreases reflecting the restoration of the symmetry. In contrast to these clear-cut arguments, experimental evidence is so far limited. First of all, the $\bar{q}q$ is nothing but the vacuum itself. It is neither visible nor perceptible. In this article, we unravel this invisible existence by high precision measurement of pionic atoms, $π^-$-meson-nucleus bound systems. Using the $π^-$ as a probe, we demonstrate that $|<\bar{q}q>|$ is reduced in the nucleus at 58% of the normal nuclear density by a factor of 77 $\pm$ 2% compared with that in the vacuum. This reduction indicates that the chiral symmetry is partially restored due to the extremely high density of the nucleus. The present experimental result clearly exhibits the existence of the hidden structure, the chiral condensate, in the vacuum.
△ Less
Submitted 29 September, 2023; v1 submitted 12 April, 2022;
originally announced April 2022.
-
Optimal Sampled-Data Control of a Nonlinear System
Authors:
Yasuaki Oishi,
Noboru Sakamoto
Abstract:
Optimal sampled-data control of a nonlinear system is considered with the stable-manifold approach and extensive use of numerical techniques. The idea is to notice the Hamiltonian system associated with the considered optimal control problem and to compute trajectories on its stable manifold. Since the control input accompanied with those trajectories is proved to be optimal, the optimal control l…
▽ More
Optimal sampled-data control of a nonlinear system is considered with the stable-manifold approach and extensive use of numerical techniques. The idea is to notice the Hamiltonian system associated with the considered optimal control problem and to compute trajectories on its stable manifold. Since the control input accompanied with those trajectories is proved to be optimal, the optimal control law can be obtained through interpolation. The stable-manifold approach was originally proposed for continuous-time optimal control and here it is adapted for sampled-data control based on the works of Navasca. In the case of sampled-data control, the approach requires the state transition of the controlled plant during one sampling period together with its derivatives with respect to the state and the input. Their computation is achieved by numerical techniques. Moreover, a shooting method is proposed for systematic generation of the trajectories and extension is considered for the intersample behavior to be taken into account. The proposed method is applied to tracking control of a wheeled mobile robot. It works successfully with a rather long sampling period.
△ Less
Submitted 29 December, 2021;
originally announced December 2021.
-
Development of microwave cavities for measurement of muonium hyperfine structure at J-PARC
Authors:
K. S. Tanaka,
M. Iwasaki,
O. Kamigaito,
S. Kanda,
N. Kawamura,
Y. Matsuda,
T. Mibe,
S. Nishimura,
N. Saito,
N. Sakamoto,
S. Seo,
K. Shimomura,
P. Strasser,
K. Suda,
T. Tanaka,
H. A. Torii,
A. Toyoda,
Y. Ueno,
M. Yoshida
Abstract:
The MuSEUM collaboration is planning measurements of the ground-state hyperfine structure (HFS) of muonium at the Japan Proton Accelerator Research Complex (J-PARC), Materials and Life Science Experimental Facility. The high-intensity beam that will soon be available at H-line allows for more precise measurements by one order of magnitude. We plan to conduct two staged measurements. First, we will…
▽ More
The MuSEUM collaboration is planning measurements of the ground-state hyperfine structure (HFS) of muonium at the Japan Proton Accelerator Research Complex (J-PARC), Materials and Life Science Experimental Facility. The high-intensity beam that will soon be available at H-line allows for more precise measurements by one order of magnitude. We plan to conduct two staged measurements. First, we will measure the Mu-HFS in a near-zero magnetic field, and thereafter we will measure it in a strong magnetic field. We have developed two microwave cavities for this purpose. Furthermore, we evaluated systematic uncertainties from such a fluctuation of microwave fields and confirm the requirement of the microwave system, we use a microwave field distribution calculated from the finite element method.
△ Less
Submitted 3 January, 2022; v1 submitted 14 April, 2021;
originally announced April 2021.
-
A Visual Analytics Approach for Hardware System Monitoring with Streaming Functional Data Analysis
Authors:
Fnu Shilpika,
Takanori Fujiwara,
Naohisa Sakamoto,
Jorji Nonaka,
Kwan-Liu Ma
Abstract:
Many real-world applications involve analyzing time-dependent phenomena, which are intrinsically functional, consisting of curves varying over a continuum (e.g., time). When analyzing continuous data, functional data analysis (FDA) provides substantial benefits, such as the ability to study the derivatives and to restrict the ordering of data. However, continuous data inherently has infinite dimen…
▽ More
Many real-world applications involve analyzing time-dependent phenomena, which are intrinsically functional, consisting of curves varying over a continuum (e.g., time). When analyzing continuous data, functional data analysis (FDA) provides substantial benefits, such as the ability to study the derivatives and to restrict the ordering of data. However, continuous data inherently has infinite dimensions, and for a long time series, FDA methods often suffer from high computational costs. The analysis problem becomes even more challenging when updating the FDA results for continuously arriving data. In this paper, we present a visual analytics approach for monitoring and reviewing time series data streamed from a hardware system with a focus on identifying outliers by using FDA. To perform FDA while addressing the computational problem, we introduce new incremental and progressive algorithms that promptly generate the magnitude-shape (MS) plot, which conveys both the functional magnitude and shape outlyingness of time series data. In addition, by using an MS plot in conjunction with an FDA version of principal component analysis, we enhance the analyst's ability to investigate the visually-identified outliers. We illustrate the effectiveness of our approach with two use scenarios using real-world datasets. The resulting tool is evaluated by industry experts using real-world streaming datasets.
△ Less
Submitted 21 February, 2022; v1 submitted 25 November, 2020;
originally announced November 2020.
-
When does stabilizability imply the existence of infinite horizon optimal control in nonlinear systems?
Authors:
Noboru Sakamoto
Abstract:
The paper addresses an existence problem for infinite horizon optimal control when the system under control is exponentially stabilizable or stable. Classes of nonlinear control systems for which infinite horizon optimal controls exist are identified in terms of stability, stabilizability, detectability and growth conditions. The result then applies to estimate the existence region of stable manif…
▽ More
The paper addresses an existence problem for infinite horizon optimal control when the system under control is exponentially stabilizable or stable. Classes of nonlinear control systems for which infinite horizon optimal controls exist are identified in terms of stability, stabilizability, detectability and growth conditions. The result then applies to estimate the existence region of stable manifolds in the associated Hamiltonian systems. Applications of the results also include the analysis for turnpike property in nonlinear finite horizon optimal control problems by a geometric approach.
△ Less
Submitted 8 June, 2021; v1 submitted 31 August, 2020;
originally announced August 2020.
-
A Visual Analytics Framework for Reviewing Multivariate Time-Series Data with Dimensionality Reduction
Authors:
Takanori Fujiwara,
Shilpika,
Naohisa Sakamoto,
Jorji Nonaka,
Keiji Yamamoto,
Kwan-Liu Ma
Abstract:
Data-driven problem solving in many real-world applications involves analysis of time-dependent multivariate data, for which dimensionality reduction (DR) methods are often used to uncover the intrinsic structure and features of the data. However, DR is usually applied to a subset of data that is either single-time-point multivariate or univariate time-series, resulting in the need to manually exa…
▽ More
Data-driven problem solving in many real-world applications involves analysis of time-dependent multivariate data, for which dimensionality reduction (DR) methods are often used to uncover the intrinsic structure and features of the data. However, DR is usually applied to a subset of data that is either single-time-point multivariate or univariate time-series, resulting in the need to manually examine and correlate the DR results out of different data subsets. When the number of dimensions is large either in terms of the number of time points or attributes, this manual task becomes too tedious and infeasible. In this paper, we present MulTiDR, a new DR framework that enables processing of time-dependent multivariate data as a whole to provide a comprehensive overview of the data. With the framework, we employ DR in two steps. When treating the instances, time points, and attributes of the data as a 3D array, the first DR step reduces the three axes of the array to two, and the second DR step visualizes the data in a lower-dimensional space. In addition, by coupling with a contrastive learning method and interactive visualizations, our framework enhances analysts' ability to interpret DR results. We demonstrate the effectiveness of our framework with four case studies using real-world datasets.
△ Less
Submitted 27 October, 2021; v1 submitted 2 August, 2020;
originally announced August 2020.
-
The turnpike with lack of observability
Authors:
Dario Pighin,
Noboru Sakamoto
Abstract:
We obtain turnpike results for optimal control problems with lack of stabilizability in the state equation and/or detectability in the state term in the cost functional.
We show how, under weakened stabilizability/detectability conditions, terminal conditions may affect turnpike phenomena.
Numerical simulations have been performed to illustrate the theoretical results.
We obtain turnpike results for optimal control problems with lack of stabilizability in the state equation and/or detectability in the state term in the cost functional.
We show how, under weakened stabilizability/detectability conditions, terminal conditions may affect turnpike phenomena.
Numerical simulations have been performed to illustrate the theoretical results.
△ Less
Submitted 28 July, 2020;
originally announced July 2020.
-
The turnpike property in the maximum hands-off control
Authors:
Noboru Sakamoto,
Masaaki Nagahara
Abstract:
This paper presents analyses for the maximum hands-off control using the geometric methods developed for the theory of turnpike in optimal control. First, a sufficient condition is proved for the existence of the maximum hands-off control for linear time-invariant systems with arbitrarily fixed initial and terminal points using the relation with $L^1$ optimal control. Next, a sufficient condition…
▽ More
This paper presents analyses for the maximum hands-off control using the geometric methods developed for the theory of turnpike in optimal control. First, a sufficient condition is proved for the existence of the maximum hands-off control for linear time-invariant systems with arbitrarily fixed initial and terminal points using the relation with $L^1$ optimal control. Next, a sufficient condition is derived for the maximum hands-off control to have the turnpike property, which may be useful for approximate design of the control.
△ Less
Submitted 29 April, 2020;
originally announced April 2020.
-
Model Reduction of Converter-Dominated Power Systems by Singular Perturbation Theory
Authors:
Umberto Biccari,
Noboru Sakamoto,
Eneko Unamuno,
Danel Madariaga,
Enrique Zuazua,
Jon Andoni Barrena
Abstract:
The increasing integration of power electronic devices is driving the development of more advanced tools and methods for the modeling, analysis, and control of modern power systems to cope with the different time-scale oscillations. In this paper, we propose a general methodology based on the singular perturbation theory to reduce the order of systems modeled by ordinary differential equations and…
▽ More
The increasing integration of power electronic devices is driving the development of more advanced tools and methods for the modeling, analysis, and control of modern power systems to cope with the different time-scale oscillations. In this paper, we propose a general methodology based on the singular perturbation theory to reduce the order of systems modeled by ordinary differential equations and the computational burden in their simulation. In particular, we apply the proposed methodology to a simplified power system scenario comprised of three inverters in parallel---controlled as synchronverters---connected to an ideal grid. We demonstrate by time-domain simulations that the reduced and decoupled system obtained with the proposed approach accurately represents the dynamics of the original system because it preserves the non-linear dynamics. This shows the efficiency of our technique even for transient perturbations and has relevant applications including the simplification of the Lyapunov stability assessment or the design of non-linear controllers for large-scale power systems.
△ Less
Submitted 21 October, 2019;
originally announced October 2019.
-
Rotor imbalance suppression by optimal control
Authors:
Matteo Gnuffi,
Dario Pighin,
Noboru Sakamoto
Abstract:
An imbalanced rotor is considered. A system of moving balancing masses is given. We determine the optimal movement of the balancing masses to minimize the imbalance on the rotor. The optimal movement is given by an open-loop control solving an optimal control problem posed in infinite time. By methods of the Calculus of Variations, the existence of the optimum is proved and the corresponding optim…
▽ More
An imbalanced rotor is considered. A system of moving balancing masses is given. We determine the optimal movement of the balancing masses to minimize the imbalance on the rotor. The optimal movement is given by an open-loop control solving an optimal control problem posed in infinite time. By methods of the Calculus of Variations, the existence of the optimum is proved and the corresponding optimality conditions have been derived. Asymptotic behavior of the control system is studied rigorously. By Łojasiewicz inequality, convergence of the optima as time $t\to +\infty$ towards a steady configuration is ensured. An explicit estimate of the convergence rate is given. This guarantees that the optimal control stabilizes the system. In case the imbalance is below a computed threshold, the convergence occurs exponentially fast. This is proved by the Stable Manifold Theorem applied to the Pontryagin optimality system. Moreover, a closed-loop control strategy based on Reinforcement Learning is proposed. Numerical simulations have been performed, validating the theoretical results.
△ Less
Submitted 27 December, 2020; v1 submitted 26 July, 2019;
originally announced July 2019.
-
The turnpike property in nonlinear optimal control -- A geometric approach
Authors:
Noboru Sakamoto,
Enrique Zuazua
Abstract:
This paper presents, using dynamical system theory, a framework for investigating the turnpike property in nonlinear optimal control. First, it is shown that a turnpike-like property appears in general dynamical systems with hyperbolic equilibrium and then, apply it to optimal control problems to obtain sufficient conditions for the turnpike occurs. The approach taken is geometric and gives insigh…
▽ More
This paper presents, using dynamical system theory, a framework for investigating the turnpike property in nonlinear optimal control. First, it is shown that a turnpike-like property appears in general dynamical systems with hyperbolic equilibrium and then, apply it to optimal control problems to obtain sufficient conditions for the turnpike occurs. The approach taken is geometric and gives insights for the behaviors of controlled trajectories, allowing us to find simpler proofs for existing results on the turnpike properties. Attempts to remove smallness restrictions for initial and target states are also discussed based on the geometry of (un)stable manifold and exponential stabilizability of control systems.
△ Less
Submitted 9 February, 2021; v1 submitted 21 March, 2019;
originally announced March 2019.
-
Nebular history of an ultrarefractory phase bearing CAI from a reduced type CV chondrite
Authors:
Takashi Yoshizaki,
Daisuke Nakashima,
Tomoki Nakamura,
Changkun Park,
Naoya Sakamoto,
Hatsumi Ishida,
Shoichi Itoh
Abstract:
Ultrarefractory (UR) phases in CAIs could have formed at higher T compared to common CAI minerals and thus they potentially provide constraints on very high-T processes in the solar nebula. We report a detailed characterization of an UR phase davisite bearing CAI from a reduced type CV chondrite. Absence of secondary iron- and/or alkali-rich phases and occurrence of LIME olivine indicate that prim…
▽ More
Ultrarefractory (UR) phases in CAIs could have formed at higher T compared to common CAI minerals and thus they potentially provide constraints on very high-T processes in the solar nebula. We report a detailed characterization of an UR phase davisite bearing CAI from a reduced type CV chondrite. Absence of secondary iron- and/or alkali-rich phases and occurrence of LIME olivine indicate that primitive chemical and isotopic compositions are preserved in the CAI. Davisite occur only in one lithological unit that consists of three chemically and isotopically distinct parts: i) $^{16}$O-poor regions with reversely-zoned melilite and davisite; ii) $^{16}$O-rich regions consisting of unzoned, gehlenitic melilite, diopside and spinel; and iii) spinel framboids composed of $^{16}$O-rich spinel and $^{16}$O-poor melilite. Random distribution of chemical and isotopic heterogeneities with sharp boundaries in the CAI indicates its formation by an aggregation of mineral assemblages formed and processed separately at different time and/or space. Although isotope exchange prior to the final agglomeration of the CAI cannot be ruled out, we suggest that modification of chemical and isotopic composition of porous CAI precursors or aggregation of isotopically distinct mineral assemblages are alternative scenarios for the origin of O-isotopic heterogeneity in CAIs. In either case, coexistence of spatially and/or temporally distinct $^{16}$O-rich and -poor gaseous reservoirs at the earliest stage of the solar system formation is required. The grain-scale oxygen isotopic disequilibrium in the CAI indicate that post-formation heating of the CAI was short, which can be achieved by rapid outward transport of the CAI. High Ti$^{3+}$/Ti$^{\mathrm{tot}}$ ratios of pyroxene and presence of LIME olivine document that the entire CAI formation process took place under highly reducing conditions.
△ Less
Submitted 22 February, 2019; v1 submitted 2 December, 2018;
originally announced December 2018.
-
Adaptive Ranking Based Constraint Handling for Explicitly Constrained Black-Box Optimization
Authors:
Naoki Sakamoto,
Youhei Akimoto
Abstract:
We propose a novel constraint-handling technique for the covariance matrix adaptation evolution strategy (CMA-ES). The proposed technique is aimed at solving explicitly constrained black-box continuous optimization problems, in which the explicit constraint is a constraint whereby the computational time for the constraint violation and its (numerical) gradient are negligible compared to that for t…
▽ More
We propose a novel constraint-handling technique for the covariance matrix adaptation evolution strategy (CMA-ES). The proposed technique is aimed at solving explicitly constrained black-box continuous optimization problems, in which the explicit constraint is a constraint whereby the computational time for the constraint violation and its (numerical) gradient are negligible compared to that for the objective function. This method is designed to realize two invariance properties: invariance to the affine transformation of the search space, and invariance to the increasing transformation of the objective and constraint functions. The CMA-ES is designed to possess these properties for handling difficulties that appear in black-box optimization problems, such as non-separability, ill-conditioning, ruggedness, and the different orders of magnitude in the objective. The proposed constraint-handling technique (CHT), known as ARCH, modifies the underlying CMA-ES only in terms of the ranking of the candidate solutions. It employs a repair operator and an adaptive ranking aggregation strategy to compute the ranking. We developed test problems to evaluate the effects of the invariance properties, and performed experiments to empirically verify the invariance of the algorithm. We compared the proposed method with other CHTs on the CEC 2006 constrained optimization benchmark suite to demonstrate its efficacy. Empirical studies reveal that ARCH is able to exploit the explicitness of the constraint functions effectively, sometimes even more efficiently than an existing box-constraint handling technique on box-constrained problems, while exhibiting the invariance properties. Moreover, ARCH overwhelmingly outperforms CHTs by not exploiting the explicit constraints in terms of the number of objective function calls.
△ Less
Submitted 9 May, 2022; v1 submitted 2 November, 2018;
originally announced November 2018.
-
Fast and Accurate Tumor Segmentation of Histology Images using Persistent Homology and Deep Convolutional Features
Authors:
Talha Qaiser,
Yee-Wah Tsang,
Daiki Taniyama,
Naoya Sakamoto,
Kazuaki Nakane,
David Epstein,
Nasir Rajpoot
Abstract:
Tumor segmentation in whole-slide images of histology slides is an important step towards computer-assisted diagnosis. In this work, we propose a tumor segmentation framework based on the novel concept of persistent homology profiles (PHPs). For a given image patch, the homology profiles are derived by efficient computation of persistent homology, which is an algebraic tool from homology theory. W…
▽ More
Tumor segmentation in whole-slide images of histology slides is an important step towards computer-assisted diagnosis. In this work, we propose a tumor segmentation framework based on the novel concept of persistent homology profiles (PHPs). For a given image patch, the homology profiles are derived by efficient computation of persistent homology, which is an algebraic tool from homology theory. We propose an efficient way of computing topological persistence of an image, alternative to simplicial homology. The PHPs are devised to distinguish tumor regions from their normal counterparts by modeling the atypical characteristics of tumor nuclei. We propose two variants of our method for tumor segmentation: one that targets speed without compromising accuracy and the other that targets higher accuracy. The fast version is based on the selection of exemplar image patches from a convolution neural network (CNN) and patch classification by quantifying the divergence between the PHPs of exemplars and the input image patch. Detailed comparative evaluation shows that the proposed algorithm is significantly faster than competing algorithms while achieving comparable results. The accurate version combines the PHPs and high-level CNN features and employs a multi-stage ensemble strategy for image patch labeling. Experimental results demonstrate that the combination of PHPs and CNN features outperforms competing algorithms. This study is performed on two independently collected colorectal datasets containing adenoma, adenocarcinoma, signet and healthy cases. Collectively, the accurate tumor segmentation produces the highest average patch-level F1-score, as compared with competing algorithms, on malignant and healthy cases from both the datasets. Overall the proposed framework highlights the utility of persistent homology for histopathology image analysis.
△ Less
Submitted 9 May, 2018;
originally announced May 2018.
-
Spectroscopy of pionic atoms in $\mathbf{{}^{122}{\textbf Sn}({\textit d},{}^3{\textbf He})}$ reaction and angular dependence of the formation cross sections
Authors:
T. Nishi,
K. Itahashi,
G. P. A. Berg,
H. Fujioka,
N. Fukuda,
N. Fukunishi,
H. Geissel,
R. S. Hayano,
S. Hirenzaki,
K. Ichikawa,
N. Ikeno,
N. Inabe,
S. Itoh,
M. Iwasaki,
D. Kameda,
S. Kawase,
T. Kubo,
K. Kusaka,
H. Matsubara,
S. Michimasa,
K. Miki,
G. Mishima,
H. Miya,
H. Nagahiro,
M. Nakamura
, et al. (14 additional authors not shown)
Abstract:
We observed the atomic $1s$ and $2p$ states of $π^-$ bound to ${}^{121}{\rm Sn}$ nuclei as distinct peak structures in the missing mass spectra of the ${}^{122}{\rm Sn}(d,{}^3{\rm He})$ nuclear reaction. A very intense deuteron beam and a spectrometer with a large angular acceptance let us achieve potential of discovery, which includes capability of determining the angle-dependent cross sections w…
▽ More
We observed the atomic $1s$ and $2p$ states of $π^-$ bound to ${}^{121}{\rm Sn}$ nuclei as distinct peak structures in the missing mass spectra of the ${}^{122}{\rm Sn}(d,{}^3{\rm He})$ nuclear reaction. A very intense deuteron beam and a spectrometer with a large angular acceptance let us achieve potential of discovery, which includes capability of determining the angle-dependent cross sections with high statistics. The $2p$ state in a Sn nucleus was observed for the first time. The binding energies and widths of the pionic states are determined and found to be consistent with previous experimental results of other Sn isotopes. The spectrum is measured at finite reaction angles for the first time. The formation cross sections at the reaction angles between 0 and $2^\circ$ are determined. The observed reaction-angle dependence of each state is reproduced by theoretical calculations. However, the quantitative comparison with our high-precision data reveals a significant discrepancy between the measured and calculated formation cross sections of the pionic $1s$ state.
△ Less
Submitted 14 April, 2018; v1 submitted 25 August, 2017;
originally announced August 2017.
-
Physically unclonable function using initial waveform of ring oscillators on 65 nm CMOS technology
Authors:
Tetsufumi Tanamoto,
Satoshi Takaya,
Nobuaki Sakamoto,
Hirotsugu Kasho,
Shinichi Yasuda,
Takao Marukame,
Shinobu Fujita,
Yuichiro Mitani
Abstract:
A silicon physically unclonable function (PUF) using ring oscillators (ROs) has the advantage of easy application in both an application specific integrated circuit (ASIC) and a field-programmable gate array (FPGA). Here, we provide a RO-PUF using the initial waveform of the ROs based on 65 nm CMOS technology. Compared with the conventional RO-PUF, the number of ROs is greatly reduced and the time…
▽ More
A silicon physically unclonable function (PUF) using ring oscillators (ROs) has the advantage of easy application in both an application specific integrated circuit (ASIC) and a field-programmable gate array (FPGA). Here, we provide a RO-PUF using the initial waveform of the ROs based on 65 nm CMOS technology. Compared with the conventional RO-PUF, the number of ROs is greatly reduced and the time needed to generate an ID is within a couple of system clocks.
△ Less
Submitted 10 February, 2017;
originally announced March 2017.
-
Simple Elastic Network Models for Exhaustive Analysis of Long Double-Stranded DNA Dynamics with Sequence Geometry Dependence
Authors:
Shuhei Isami,
Naoaki Sakamoto,
Hiraku Nishimori,
Akinori Awazu
Abstract:
Simple elastic network models of DNA were developed to reveal the structure-dynamics relationships for several nucleotide sequences. First, we propose a simple all-atom elastic network model of DNA that can explain the profiles of temperature factors for several crystal structures of DNA. Second, we propose a coarse-grained elastic network model of DNA, where each nucleotide is described only by o…
▽ More
Simple elastic network models of DNA were developed to reveal the structure-dynamics relationships for several nucleotide sequences. First, we propose a simple all-atom elastic network model of DNA that can explain the profiles of temperature factors for several crystal structures of DNA. Second, we propose a coarse-grained elastic network model of DNA, where each nucleotide is described only by one node. This model could effectively reproduce the detailed dynamics obtained with the all-atom elastic network model according to the sequence-dependent geometry. Through normal-mode analysis for the coarse-grained elastic network model, we exhaustively analyzed the dynamic features of a large number of long DNA sequences, approximately $\sim 150$ bp in length. These analyses revealed positive correlations between the nucleosome-forming abilities and the inter-strand fluctuation strength of double-stranded DNA for several DNA sequences.
△ Less
Submitted 6 November, 2015;
originally announced November 2015.
-
Phase diagram and piezoelectric response of (Ba1-xCax)(Zr0.1Ti0.9)O3 solid solution
Authors:
Desheng Fu,
Yuto Kamai,
Naonori Sakamoto,
Naoki Wakiya,
Hisao Suzuki,
Mitsuru Itoh
Abstract:
We report the phase diagram of (Ba1-xCax)(Zr0.1Ti0.9)O3 solid solution. It is found that substitution of smaller Ca ions for Ba ions can slightly increase the cubic-tetragonal(T) para-ferroelectric phase transition temperature and strongly decrease the T-orthorhombic (O) and O-rhombohedral (R) transition. This unique ferroelectric phase evolution is attributed to Ca off-centering effects. More imp…
▽ More
We report the phase diagram of (Ba1-xCax)(Zr0.1Ti0.9)O3 solid solution. It is found that substitution of smaller Ca ions for Ba ions can slightly increase the cubic-tetragonal(T) para-ferroelectric phase transition temperature and strongly decrease the T-orthorhombic (O) and O-rhombohedral (R) transition. This unique ferroelectric phase evolution is attributed to Ca off-centering effects. More importantly, lowering of the T-O or O-R phase transitions allows us to prepare the piezoelectric ceramics with a strain response as high as S/E~800 pm/V (E=10 kV/cm) over a wide range of compositions with x~0.1 - 0. 18 at room temperature, which may be interesting for piezoelectric applications.
△ Less
Submitted 16 September, 2013;
originally announced September 2013.
-
Angular distributions of the vector Ay and tensor Ayy, Axx, Axz analyzing powers in the dd->3Hp reaction at 200 MeV
Authors:
A. K. Kurilkin,
T. Saito,
V. P. Ladygin,
T. Uesaka,
M. Hatano,
A. Yu. Isupov,
M. Janek,
H. Kato,
N. B. Ladygina,
Y. Maeda,
A. I. Malakhov,
J. Nishikawa,
T. Ohnishi,
H. Okamura,
S. G. Reznikov,
H. Sakai,
N. Sakamoto,
S. Sakoda,
Y. Satou,
K. Sekiguchi,
K. Suda,
A. Tamii,
N. Uchigashima,
T. A. Vasiliev,
K. Yako
Abstract:
A complete set of analyzing powers for the dd->3Hp reaction at the kinetic beam energy of 200 MeV has been measured in the full angular range in the c.m. frame. The observed signs of the tensor analyzing powers Ayy, Axx, and Axz at forward and backward directions have clearly demonstrated the sensitivity to the ratio of the D- and S-wave components of the triton and deuteron, respectively. The new…
▽ More
A complete set of analyzing powers for the dd->3Hp reaction at the kinetic beam energy of 200 MeV has been measured in the full angular range in the c.m. frame. The observed signs of the tensor analyzing powers Ayy, Axx, and Axz at forward and backward directions have clearly demonstrated the sensitivity to the ratio of the D- and S-wave components of the triton and deuteron, respectively. The new high-precision data are compared with the prediction of the relativistic multiple-scattering model by using standard wave functions of the three-nucleon bound state and of the deuteron.
△ Less
Submitted 20 May, 2013;
originally announced May 2013.
-
Three Nucleon Force Effects in Intermediate Energy Deuteron Analyzing Powers for dp Elastic Scattering
Authors:
K. Sekiguchi,
H. Okamura,
N. Sakamoto,
H. Suzuki,
M. Dozono,
Y. Maeda,
T. Saito,
S. Sakaguchi,
H. Sakai,
M. Sasano,
Y. Shimizu,
T. Wakasa,
K. Yako,
H. Witała,
W. Glöckle,
J. Golak,
H. Kamada,
A. Nogga
Abstract:
A complete high precision set of deuteron analyzing powers for elastic deuteron-proton ($dp$) scattering at 250 MeV/nucleon (MeV/N) has been measured. The new data are presented together with data from previous measurements at 70, 100, 135 and 200 MeV/N. They are compared with the results of three-nucleon (3N) Faddeev calculations based on modern nucleon-nucleon (NN) potentials alone or combined w…
▽ More
A complete high precision set of deuteron analyzing powers for elastic deuteron-proton ($dp$) scattering at 250 MeV/nucleon (MeV/N) has been measured. The new data are presented together with data from previous measurements at 70, 100, 135 and 200 MeV/N. They are compared with the results of three-nucleon (3N) Faddeev calculations based on modern nucleon-nucleon (NN) potentials alone or combined with two models of three nucleon forces (3NFs): the Tucson-Melbourne 99 (TM99) and Urbana IX. At 250 MeV/N large discrepancies between pure NN models and data, which are not resolved by including 3NFs, were found at c.m.\ backward angles of $θ_{\rm c.m.}\gtrsim 120^\circ$ for almost all the deuteron analyzing powers. These discrepancies are quite similar to those found for the cross section at the same energy. We found small relativistic effects that cannot resolve the discrepancies with the data indicating that other, short-ranged 3NFs are required to obtain a proper description of the data.
△ Less
Submitted 1 June, 2011;
originally announced June 2011.
-
High-Tc BaTiO3 ferroelectric films with frozen negative pressure states
Authors:
Desheng Fu,
Kouhei Fukamachi,
Naonori Sakamoto,
Naoki Wakiya,
Hisao Suzuki,
Mitsuru Itoh,
Takeshi Nishimatsu
Abstract:
We report that an energetic plasma process is extremely effective in enlarging the unit cell volume and ferroelectric distortion of the ferroelectric oxides, resulting in a significant increase in its Tc. We demonstrate experimentally that c-axis oriented BaTiO3 films can be deposited directly on quartz glass and Si substrates using such a process and that the material shows an approximately 5% ex…
▽ More
We report that an energetic plasma process is extremely effective in enlarging the unit cell volume and ferroelectric distortion of the ferroelectric oxides, resulting in a significant increase in its Tc. We demonstrate experimentally that c-axis oriented BaTiO3 films can be deposited directly on quartz glass and Si substrates using such a process and that the material shows an approximately 5% expansion of its unit cell volume and approximately 4 times the ferroelectric tetragonal distortion of the bulk crystals. Such a frozen negative pressure results in a Tc value that is approximately 580 K higher than that of bulk single crystals, providing a wide range of operating temperatures for the devices. The present results suggest an approach to producing ferroelectric oxides with unique properties that might be extended to ferromagnetic or superconductor oxides and demonstrate a route to a lead-free ferroelectric oxide for capacitive, ferroelectric memory, and electro-optical devices.
△ Less
Submitted 22 February, 2011;
originally announced February 2011.
-
Search for VHE gamma rays from SS433/W50 with the CANGAROO-II telescope
Authors:
Sei. Hayashi,
F. Kajino,
T. Naito,
A. Asahara,
G. V. Bicknell,
R. W. Clay,
Y. Doi,
P. G. Edwards,
R. Enomoto,
S. Gunji,
S. Hara,
T. Hara,
T. Hattori,
C. Itoh,
S. Kabuki,
H. Katagiri,
A. Kawachi,
T. Kifune,
L. T. Ksenofontov,
H. Kubo,
T. Kurihara,
R. Kurosaka,
J. Kushida,
Y. Matsubara,
Y. Miyashita
, et al. (26 additional authors not shown)
Abstract:
SS433, located at the center of the supernova remnant W50, is a close proximity binary system consisting of a compact star and a normal star. Jets of material are directed outwards from the vicinity of the compact star symmetrically to the east and west. Non-thermal hard X-ray emission is detected from lobes lying on both sides. Shock accelerated electrons are expected to generate sub-TeV gamma…
▽ More
SS433, located at the center of the supernova remnant W50, is a close proximity binary system consisting of a compact star and a normal star. Jets of material are directed outwards from the vicinity of the compact star symmetrically to the east and west. Non-thermal hard X-ray emission is detected from lobes lying on both sides. Shock accelerated electrons are expected to generate sub-TeV gamma rays through the inverse-Compton process in the lobes. Observations of the western X-ray lobe region of SS433/W50 system have been performed to detect sub-TeV gamma-rays using the 10m CANGAROO-II telescope in August and September, 2001, and July and September, 2002. The total observation times are 85.2 hours for ON source, and 80.8 hours for OFF source data. No significant excess of sub-TeV gamma rays has been found at 3 regions of the western X-ray lobe of SS433/W50 system. We have derived 99% confidence level upper limits to the fluxes of gamma rays and have set constraints on the strengths of the magnetic fields assuming the synchrotron/inverse-Compton model for the wide energy range of photon spectrum from radio to TeV. The derived lower limits are 4.3 microgauss for the center of the brightest X-ray emission region and 6.3 microgauss for the far end from SS433 in the western X-ray lobe. In addition, we suggest that the spot-like X-ray emission may provide a major contribution to the hardest X-ray spectrum in the lobe.
△ Less
Submitted 1 September, 2009;
originally announced September 2009.
-
Cosmic Ray Tests of the Prototype TPC for the ILC Experiment
Authors:
K. Ackermann,
S. Arai,
D. C. Arogancia,
A. M. Bacala,
M. Ball,
T. Behnke,
H. Bito,
V. Eckardt,
K. Fujii,
T. Fusayasu,
N. Ghodbane,
H. C. Gooc Jr.,
T. Kijima,
M. Hamann,
M. Habu,
R. -D. Heuer,
K. Hiramatsu,
K. Ikematsu,
A. Kaukher,
H. Kuroiwa,
M. E. Janssen,
Y. Kato,
M. Kobayashi,
T. Kuhl,
T. Lux
, et al. (25 additional authors not shown)
Abstract:
A time projection chamber (TPC) is a strong candidate for the central tracker of the international linear collider (ILC) experiment and we have been conducting a series of cosmic ray experiments under a magnetic field up to 4 T, using a small prototype TPC with a replaceable readout device: multi-wire proportional chamber (MWPC) or gas electron multiplier (GEM). We first confirmed that the MWPC…
▽ More
A time projection chamber (TPC) is a strong candidate for the central tracker of the international linear collider (ILC) experiment and we have been conducting a series of cosmic ray experiments under a magnetic field up to 4 T, using a small prototype TPC with a replaceable readout device: multi-wire proportional chamber (MWPC) or gas electron multiplier (GEM). We first confirmed that the MWPC readout could not be a fall-back option of the ILC-TPC under a strong axial magnetic field of 4 T since its spatial resolution suffered severely from the so called E x B effect in the vicinity of the wire planes. The GEM readout, on the other hand, was found to be virtually free from the E x B effect as had been expected and gave the resolution determined by the transverse diffusion of the drift electrons (diffusion limited). Furthermore, GEMs allow a wider choice of gas mixtures than MWPCs. Among the gases we tried so far a mixture of Ar-CF4-isobutane, in which MWPCs could be prone to discharges, seems promising as the operating gas of the ILC-TPC because of its small diffusion constant especially under a strong magnetic field. We report the measured drift properties of this mixture including the diffusion constant as a function of the electric field and compare them with the predictions of Magboltz. Also presented is the spatial resolution of a GEM-based ILC-TPC estimated from the measurement with the prototype.
△ Less
Submitted 18 May, 2009;
originally announced May 2009.
-
Analyzing powers Ayy, Axx, Axz and Ay in the dd->3Hen reaction at 270 MeV
Authors:
M. Janek,
T. Saito,
V. P. Ladygin,
T. Uesaka,
M. Hatano,
A. Yu. Isupov,
H. Kato,
N. B. Ladygina,
Y. Maeda,
A. I. Malakhov,
J. Nishikawa,
T. Ohnishi,
H. Okamura,
S. G. Reznikov,
H. Sakai,
S. Sakoda,
N. Sakamoto,
Y. Satou,
K. Sekiguchi,
K. Suda,
A. Tamii,
N. Uchigashima,
T. A. Vasiliev,
K. Yako
Abstract:
The data on the tensor Ayy, Axx, Axz and vector Ay analyzing powers in the dd->3Hen obtained at Td= 270 MeV in the angular range 0 - 110 degrees in the c.m. are presented. The observed negative sign of the tensor analyzing powers Ayy, Axx and Axz at small angles clearly demonstrate the sensitivity to the ratio of the D and S wave component of the 3He wave function. However, the one-nucleon excha…
▽ More
The data on the tensor Ayy, Axx, Axz and vector Ay analyzing powers in the dd->3Hen obtained at Td= 270 MeV in the angular range 0 - 110 degrees in the c.m. are presented. The observed negative sign of the tensor analyzing powers Ayy, Axx and Axz at small angles clearly demonstrate the sensitivity to the ratio of the D and S wave component of the 3He wave function. However, the one-nucleon exchange calculations by using the standard 3He wave functions have failed to reproduce the strong variation of the tensor analyzing powers as a function of the angle in the c.m.
△ Less
Submitted 25 June, 2007;
originally announced June 2007.
-
Precision measurement of vector and tensor analyzing powers in elastic deuteron-proton scattering
Authors:
H. Mardanpour,
H. R. Amir-Ahmadi,
A. Deltuva,
K. Itoh,
N. Kalantar-Nayestanaki,
T. Kawabata,
H. Kuboki,
Y. Maeda,
J. G. Messchendorp,
S. Sakaguchi,
H. Sakai,
N. Sakamoto,
Y. Sasamoto,
M. Sasano,
K. Sekiguchi,
K. Suda,
Y. Takahashi,
T. Uesaka,
H. Witala,
K. Yako
Abstract:
High precision vector and tensor analyzing powers of elastic deuteron-proton d+p scattering have been measured at intermediate energies to investigate effects of three-nucleon forces (3NF). Angular distribution in the range of 70-120 degree in the center-of mass frame for incident-deuteron energies of 130 and 180 MeV were obtained using the RIKEN facility. The beam polarization was unambiguously…
▽ More
High precision vector and tensor analyzing powers of elastic deuteron-proton d+p scattering have been measured at intermediate energies to investigate effects of three-nucleon forces (3NF). Angular distribution in the range of 70-120 degree in the center-of mass frame for incident-deuteron energies of 130 and 180 MeV were obtained using the RIKEN facility. The beam polarization was unambiguously determined by measuring the 12C(d,alpha)10B(2+) reaction at 0 degree. Results of the measurements are compared with state-of-the-art three-nucleon calculations. The present modeling of nucleon-nucleon forces and its extension to the three-nucleon system is not sufficient to describe the high precision data consistently and requires, therefore, further investigation.
△ Less
Submitted 20 February, 2007; v1 submitted 15 November, 2006;
originally announced November 2006.
-
Evidence for an alpha cluster condensed state in 16O(alpha,alpha') at 400 MeV
Authors:
T. Wakasa,
E. Ihara,
K. Fujita,
Y. Funaki,
K. Hatanaka,
H. Horiuchi,
M. Itoh,
J. Kamiya,
G. Ropke,
H. Sakaguchi,
N. Sakamoto,
Y. Sakemi,
P. Schuck,
Y. Shimizu,
M. Takashina,
S. Terashima,
A. Tohsaki,
M. Uchida,
H. P. Yoshida,
M. Yosoi
Abstract:
Inelastic $α$ scattering on 16O is studied at 400 MeV by using an ice target. Near the 4-alpha breakup threshold of 14.4 MeV, a broad peak is observed at an excitation energy of 13.6+/-0.2 MeV with a width of 0.6+/-0.2 MeV. The spin-parity is estimated to be 0+ from the momentum-transfer dependence. The observed width is significantly larger than those of the neighboring 0+ states indicating a s…
▽ More
Inelastic $α$ scattering on 16O is studied at 400 MeV by using an ice target. Near the 4-alpha breakup threshold of 14.4 MeV, a broad peak is observed at an excitation energy of 13.6+/-0.2 MeV with a width of 0.6+/-0.2 MeV. The spin-parity is estimated to be 0+ from the momentum-transfer dependence. The observed width is significantly larger than those of the neighboring 0+ states indicating a state with a well-developed alpha cluster structure. The magnitude of the cross section is sensitive to the density distribution of the constituent alpha clusters. The observed cross section is consistent with the theoretical prediction for the alpha cluster condensed state characterized by its dilute density distribution with a large root-mean-square radius of about 4.3 fm.
△ Less
Submitted 13 November, 2006;
originally announced November 2006.
-
Resolving the Discrepancy of 135 MeV pd Elastic Scattering Cross Sections and Relativistic Effects
Authors:
K. Sekiguchi,
H. Sakai,
H. Witała,
W. Gloeckle,
J. Golak,
K. Hatanaka,
M. Hatano,
K. Itoh,
H. Kamada,
H. Kuboki,
Y. Maeda,
A. Nogga,
H. Okamura,
T. Saito,
N. Sakamoto,
Y. Sakemi,
M. Sasano,
Y. Shimizu,
K. Suda,
A. Tamii,
T. Uesaka,
T. Wakasa,
K. Yako
Abstract:
Three precise measurements for elastic pd scattering at 135 MeV/A have been performed with the three different experimental setups. The cross sections are described well by the theoretical predictions based on modern nucleon-nucleon forces combined with three nucleon forces. Relativistic Faddeev calculations show that relativistic effects are restricted to backward angles. This result supports t…
▽ More
Three precise measurements for elastic pd scattering at 135 MeV/A have been performed with the three different experimental setups. The cross sections are described well by the theoretical predictions based on modern nucleon-nucleon forces combined with three nucleon forces. Relativistic Faddeev calculations show that relativistic effects are restricted to backward angles. This result supports the two measurements recently reported by RIKEN and contradicts the KVI data.
△ Less
Submitted 3 October, 2005;
originally announced October 2005.
-
Evidence of a Pionic Enhancement Observed in $^{16}O(p,p') ^{16}O(0^-,T=1)$ at 295 MeV
Authors:
T. Wakasa,
G. P. A. Berg,
H. Fujimura,
K. Fujita,
K. Hatanaka,
M. Ichimura,
M. Itoh,
J. Kamiya,
T. Kawabata,
Y. Kitamura,
E. Obayashi,
H. Sakaguchi,
N. Sakamoto,
Y. Sakemi,
Y. Shimizu,
H. Takeda,
M. Uchida,
Y. Yasuda,
H. P. Yoshida,
M. Yosoi
Abstract:
The cross section of the ${}^{16}{\rm O}(p,p'){}^{16}{\rm O}(0^-,T=1)$ scattering was measured at a bombarding energy of 295 MeV in the momentum transfer range of $1.0 \mathrm{fm^{-1}}$ $\le$ $q_{\rm c.m.}$ $\le$ $2.1 \mathrm{fm^{-1}}$.
The isovector $0^-$ state at $E_x$ = 12.8 MeV is clearly separated from its neighboring states owing to the high energy resolution of about 30 keV.
The cross…
▽ More
The cross section of the ${}^{16}{\rm O}(p,p'){}^{16}{\rm O}(0^-,T=1)$ scattering was measured at a bombarding energy of 295 MeV in the momentum transfer range of $1.0 \mathrm{fm^{-1}}$ $\le$ $q_{\rm c.m.}$ $\le$ $2.1 \mathrm{fm^{-1}}$.
The isovector $0^-$ state at $E_x$ = 12.8 MeV is clearly separated from its neighboring states owing to the high energy resolution of about 30 keV.
The cross section data were compared with distorted wave impulse approximation (DWIA) calculations employing shell-model wave functions.
The observed cross sections around $q_{\rm c.m.}$ $\simeq$ $1.7 {\rm fm^{-1}}$ are significantly larger than predicted by these calculations, suggesting pionic enhancement as a precursor of pion condensation in nuclei.
The data are successfully reproduced by DWIA calculations using random phase approximation response functions including the $Δ$ isobar that predict pionic enhancement.
△ Less
Submitted 28 December, 2004;
originally announced December 2004.
-
Measurement of the tensor analyzing power T20 in the dd->^3Hen and dd->^3Hp at intermediate energies and at zero degree
Authors:
V. P. Ladygin,
T. Uesaka,
T. Saito,
M. Hatano,
A. Yu. Isupov,
H. Kato,
N. B. Ladygina,
Y. Maeda,
A. I. Malakhov,
J. Nishikawa,
T. Ohnishi,
H. Okamura,
S. G. Reznikov,
H. Sakai,
N. Sakamoto,
S. Sakoda,
Y. Satou,
K. Sekiguchi,
K. Suda,
A. Tamii,
N. Uchigashima,
K. Yako
Abstract:
The data on the tensor analyzing power T20 in the dd->^3Hen and dd-> ^3Hp reactions at 140, 200 and 270 MeV of the deuteron kinetic energy and at zero degree obtained at RIKEN Accelerator Research Facility are presented. The observed positive sign of T20 clearly demonstrates the sensitivity to the D/S wave ratios in the ^3He and ^3H in the energy domain of the measurements. The T20 data for the…
▽ More
The data on the tensor analyzing power T20 in the dd->^3Hen and dd-> ^3Hp reactions at 140, 200 and 270 MeV of the deuteron kinetic energy and at zero degree obtained at RIKEN Accelerator Research Facility are presented. The observed positive sign of T20 clearly demonstrates the sensitivity to the D/S wave ratios in the ^3He and ^3H in the energy domain of the measurements. The T20 data for the ^3He-n and ^3H-p channels are in agreement within experimental accuracy.
△ Less
Submitted 27 April, 2004;
originally announced April 2004.
-
Polarization Transfer Measurement for $^1H(\vec{d},\vec{p})^2 H$ Elastic Scattering at 135 MeV/u and Three Nucleon Force Effects
Authors:
K. Sekiguchi,
H. Sakai,
H. Witała,
K. Ermisch,
W. Glöckle,
J. Golak,
M. Hatano,
H. Kamada,
N. Kalantar-Nayestanaki,
H. Kato,
Y. Maeda,
J. Nishikawa,
A. Nogga,
T. Ohnishi,
H. Okamura,
T. Saito,
N. Sakamoto,
S. Sakoda,
Y. Satou,
K. Suda,
A. Tamii,
T. Uchigashima,
T. Uesaka,
T. Wakasa,
K. Yako
Abstract:
The deuteron to proton polarization transfer coefficients for the $d$--$p$ elastic scattering were precisely measured with an incoming deuteron energy of 135 MeV/u at the RIKEN Accelerator Research Facility. The data are compared to theoretical predictions based on exact solutions of three-nucleon Faddeev equations with high--precision nucleon--nucleon forces combined with different three-nucleo…
▽ More
The deuteron to proton polarization transfer coefficients for the $d$--$p$ elastic scattering were precisely measured with an incoming deuteron energy of 135 MeV/u at the RIKEN Accelerator Research Facility. The data are compared to theoretical predictions based on exact solutions of three-nucleon Faddeev equations with high--precision nucleon--nucleon forces combined with different three-nucleon forces (3NFs), representing the current, most popular models: the $2π$-exchange Tucson-Melbourne model, a modification thereof closer to chiral symmetry TM'(99), and the Urbana IX 3NF. Theory predicts large 3NF effects, especially in the angular range around the cross section minimum, but the present data only partially concurs, predominantly for $K_{xx}^{y'}-K_{yy}^{y'}$ ($K_{xx}^{y'}$, $K_{yy}^{y'}$). For the induced polarization, $P^{y'}$, the TM$'$(99) and Urbana IX 3NFs reproduce the data, but the Tucson-Melbourne 3NF fails to describe the data. For the polarization transfer coefficients, $K_{y}^{y'}$ and $K_{xz}^{y'}$, the predicted 3NF ffects are in drastic conflict to the data. These facts clearly reveal the defects of the 3NF models currently used.
△ Less
Submitted 22 April, 2004;
originally announced April 2004.
-
Three-body dN interaction in the analysis of the 12C(pol_d,d') reaction at 270 MeV
Authors:
Y. Satou,
S. Ishida,
H. Sakai,
H. Okamura,
N. Sakamoto,
H. Otsu,
T. Uesaka,
A. Tamii,
T. Wakasa,
T. Ohnishi,
K. Sekiguchi,
K. Yako,
K. Suda,
M. Hatano,
H. Kato,
Y. Maeda,
J. Nishikawa,
T. Ichihara,
T. Niizeki,
H. Kamada,
W. Glockle,
H. Witala
Abstract:
We have measured the cross sections and analyzing powers Ay and Ayy for the elastic and inelastic scattering of deuterons from the 0+(g.s.), 2+(4.44 MeV), 3-(9.64 MeV), 1+(12.71 MeV), and 2-(18.3 MeV) states in 12C at an incident energy of 270 MeV. The data are compared with microscopic distorted-wave impulse approximation calculations where the projectile-nucleon effective interactionis taken f…
▽ More
We have measured the cross sections and analyzing powers Ay and Ayy for the elastic and inelastic scattering of deuterons from the 0+(g.s.), 2+(4.44 MeV), 3-(9.64 MeV), 1+(12.71 MeV), and 2-(18.3 MeV) states in 12C at an incident energy of 270 MeV. The data are compared with microscopic distorted-wave impulse approximation calculations where the projectile-nucleon effective interactionis taken from the three-nucleon t-matrix given by rigorous Faddeev calculations presently available at intermediate energies. The agreement between theory and data compares well with that for the (p,p') reactions at comparable incident energies/nucleon.
△ Less
Submitted 3 October, 2002; v1 submitted 20 July, 2002;
originally announced July 2002.
-
Measurement of Single and Double Spin-Flip Probabilities in Inelastic Deuteron Scattering on 12C at 270 MeV
Authors:
Y. Satou,
S. Ishida,
H. Sakai,
H. Okamura,
H. Otsu,
N. Sakamoto,
T. Uesaka,
T. Wakasa,
T. Ohnishi,
K. Sekiguchi,
K. Yako,
T. Ichihara,
T. Niizeki,
K. S. Itoh,
N. Nishimori
Abstract:
The deuteron single and double spin-flip probabilities, S1 and S2, have been measured for the 12C(pol{d},pol{d}') reaction at Ed = 270 MeV for an excitation energy range between 4 and 24 MeV and a scattering angular range between Theta_lab = 2.5 and 7.5 deg. The extracted S1 exhibits characteristic values depending on the structure of the excited state. The S2 is close to zero over the measured…
▽ More
The deuteron single and double spin-flip probabilities, S1 and S2, have been measured for the 12C(pol{d},pol{d}') reaction at Ed = 270 MeV for an excitation energy range between 4 and 24 MeV and a scattering angular range between Theta_lab = 2.5 and 7.5 deg. The extracted S1 exhibits characteristic values depending on the structure of the excited state. The S2 is close to zero over the measured excitation energy range. The SFP angular distribution data for the 2+ (4.44 MeV) and 1+ (12.71 MeV) states are well described by the microscopic DWIA calculations.
△ Less
Submitted 3 October, 2001;
originally announced October 2001.
-
Reaction mechanism and characteristics of T_{20} in d + ^3He backward elastic scattering at intermediate energies
Authors:
M. Tanifuji,
S. Ishikawa,
Y. Iseri,
T. Uesaka,
N. Sakamoto,
Y. Satou,
K. Itoh,
H. Sakai,
A. Tamii,
T. Ohnishi,
K. Sekiguchi,
K. Yako,
S. Sakoda,
H. Okamura,
K. Suda,
T. Wakasa
Abstract:
For backward elastic scattering of deuterons by ^3He, cross sections σand tensor analyzing power T_{20} are measured at E_d=140-270 MeV. The data are analyzed by the PWIA and by the general formula which includes virtual excitations of other channels, with the assumption of the proton transfer from ^3He to the deuteron. Using ^3He wave functions calculated by the Faddeev equation, the PWIA descr…
▽ More
For backward elastic scattering of deuterons by ^3He, cross sections σand tensor analyzing power T_{20} are measured at E_d=140-270 MeV. The data are analyzed by the PWIA and by the general formula which includes virtual excitations of other channels, with the assumption of the proton transfer from ^3He to the deuteron. Using ^3He wave functions calculated by the Faddeev equation, the PWIA describes global features of the experimental data, while the virtual excitation effects are important for quantitative fits to the T_{20} data. Theoretical predictions on T_{20}, K_y^y (polarization transfer coefficient) and C_{yy} (spin correlation coefficient) are provided up to GeV energies.
△ Less
Submitted 15 November, 1999;
originally announced November 1999.
