-
Multiple MgII Absorption Systems in the Lines of Sight to Quadruply Lensed Quasar H1413+1143
Authors:
Katsuya Okoshi,
Yosuke Minowa,
Nobunari Kashikawa,
Toru Misawa,
Daichi Kashino,
Hajime Sugai,
Kazuya Matsubayashi,
Atsushi Shimono,
Shinobu Ozaki
Abstract:
We find multiple Mg II absorption systems at redshift z=1.66, 2.069, and 2.097 in the spatially resolved spectra of the quadruply gravitationally lensed quasar H1413+1143 utilizing the Kyoto tridimensional spectrograph II (Kyoto 3DII) spectrograph on board the Subaru telescope. Here we present the first measurement of differences in Mg II absorption strength of the multiple intervening absorbers,…
▽ More
We find multiple Mg II absorption systems at redshift z=1.66, 2.069, and 2.097 in the spatially resolved spectra of the quadruply gravitationally lensed quasar H1413+1143 utilizing the Kyoto tridimensional spectrograph II (Kyoto 3DII) spectrograph on board the Subaru telescope. Here we present the first measurement of differences in Mg II absorption strength of the multiple intervening absorbers, which include ones identified as damped Lyman alpha (DLA) absorption systems. Our detection of the significant Mg II absorptions in the spatially resolved spectra reveals the inhomogeneous chemical enrichment on scales of about 12 kpc within the separation of the four sightlines. For the DLA system at z=1.66, the rest equivalent widths of the Mg II absorption lines between the four spatially resolved lines of sight change by factors of up to about 6, which trace the variations in the H I absorption strength. This suggests that inhomogeneous cold absorbers that give rise to the strong H I/Mg II absorptions dwell on a scale of about 6-12 kpc between the four lines of sight. We also investigate the degree of variation in the equivalent width of the absorption lines between the lines of sight. We find that the systems giving rise to strong absorptions in the spectra of the quadruply lensed quasars tend to have a high degree of variation in absorption strength between the lines of sight toward the lensed quasars.
△ Less
Submitted 4 October, 2021;
originally announced October 2021.
-
A 100-pc Scale, Fast and Dense Outflow in Narrow-Line Seyfert 1 Galaxy IRAS04576+0912
Authors:
Toshihiro Kawaguchi,
Shinobu Ozaki,
Hajime Sugai,
Kazuya Matsubayashi,
Takashi Hattori,
Atsushi Shimono,
Kentaro Aoki,
Yutaka Hayano,
Yosuke Minowa,
Kazuma Mitsuda,
Yasuhito Hashiba
Abstract:
We report the initial result of an adaptive-optics assisted, optical integral-field-unit observation on IRAS04576+0912, the nearest (z=0.039) active galactic nucleus with a prominent blueshift/tail in [O III] emission from a sample of such objects that we have collected from the literature. We aim at addressing the putative quasar-mode feedback process with Subaru/Kyoto 3D II+AO188. The optical wa…
▽ More
We report the initial result of an adaptive-optics assisted, optical integral-field-unit observation on IRAS04576+0912, the nearest (z=0.039) active galactic nucleus with a prominent blueshift/tail in [O III] emission from a sample of such objects that we have collected from the literature. We aim at addressing the putative quasar-mode feedback process with Subaru/Kyoto 3D II+AO188. The optical waveband (6400--7500 AA) enables us to measure the gas density via the [S II] doublets, in contrast to earlier Near-IR studies. Since the fast [O III] outflow happens only around rapidly growing central black holes, this object is suitable for investigating the black hole-galaxy coevolution. The obtained data cube exhibits blue tail in the [S II] emission at many lenslets. By fitting the spectrum with the high excess flux at the [S II] blue tail, we find the fast (~ 860 km/s), dense (>3000/cc), wide-angle and offset outflow in central 100-pc scales. Although the large opening angle and the high gas outflow-to-accretion ratio may favour the feedback hypothesis, the inferred kinetic power injection rate of this ionized gas outflow seems insufficient to influence the whole host galaxy. A conventional assumption of a low density must have overestimated the feedback process.
△ Less
Submitted 19 July, 2018; v1 submitted 17 July, 2018;
originally announced July 2018.
-
H$α$ intensity map of the repeating fast radio burst FRB 121102 host galaxy from Subaru/Kyoto 3DII AO-assisted optical integral-field spectroscopy
Authors:
Mitsuru Kokubo,
Kazuma Mitsuda,
Hajime Sugai,
Shinobu Ozaki,
Yosuke Minowa,
Takashi Hattori,
Yutaka Hayano,
Kazuya Matsubayashi,
Atsushi Shimono,
Shigeyuki Sako,
Mamoru Doi
Abstract:
We present the H$α$ intensity map of the host galaxy of the repeating fast radio burst FRB 121102 at a redshift of z=0.193 obtained with the AO-assisted Kyoto 3DII optical integral-field unit mounted on the 8.2-m Subaru Telescope. We detected a compact H$α$-emitting (i.e., star-forming) region in the galaxy, which has a much smaller angular size [$< 0".57$ (1.9 kpc) at full width at half maximum (…
▽ More
We present the H$α$ intensity map of the host galaxy of the repeating fast radio burst FRB 121102 at a redshift of z=0.193 obtained with the AO-assisted Kyoto 3DII optical integral-field unit mounted on the 8.2-m Subaru Telescope. We detected a compact H$α$-emitting (i.e., star-forming) region in the galaxy, which has a much smaller angular size [$< 0".57$ (1.9 kpc) at full width at half maximum (FWHM)] than the extended stellar continuum emission region determined by the Gemini/GMOS z'-band image [$\simeq 1".4$ (4.6 kpc) at FWHM with ellipticity b/a=0.45]. The spatial offset between the centroid of the H$α$ emission region and the position of the radio bursts is $0".08 \pm 0".02$ ($0.26 \pm 0.07$ kpc), indicating that FRB 121102 is located within the star-forming region. This close spatial association of FRB 121102 with the star-forming region is consistent with expectations from young pulsar/magnetar models for FRB 121102, and it also suggests that the observed H$α$ emission region can make a major dispersion measure (DM) contribution to the host galaxy DM component of FRB 121102. Nevertheless, the largest possible value of the DM contribution from the H$α$ emission region inferred from our observations still requires a significant amount of ionized baryons in intergalactic medium (the so-called `missing' baryons) as the DM source of FRB 121102, and we obtain a 90\% confidence level lower limit on the cosmic baryon density in the intergalactic medium in the low-redshift universe as $Ω_{IGM} > 0.012$.
△ Less
Submitted 21 June, 2017; v1 submitted 12 May, 2017;
originally announced May 2017.
-
The Hyper Suprime-Cam SSP Survey: Overview and Survey Design
Authors:
H. Aihara,
N. Arimoto,
R. Armstrong,
S. Arnouts,
N. A. Bahcall,
S. Bickerton,
J. Bosch,
K. Bundy,
P. L. Capak,
J. H. H. Chan,
M. Chiba,
J. Coupon,
E. Egami,
M. Enoki,
F. Finet,
H. Fujimori,
S. Fujimoto,
H. Furusawa,
J. Furusawa,
T. Goto,
A. Goulding,
J. P. Greco,
J. E. Greene,
J. E. Gunn,
T. Hamana
, et al. (118 additional authors not shown)
Abstract:
Hyper Suprime-Cam (HSC) is a wide-field imaging camera on the prime focus of the 8.2m Subaru telescope on the summit of Maunakea in Hawaii. A team of scientists from Japan, Taiwan and Princeton University is using HSC to carry out a 300-night multi-band imaging survey of the high-latitude sky. The survey includes three layers: the Wide layer will cover 1400 deg$^2$ in five broad bands ($grizy$), w…
▽ More
Hyper Suprime-Cam (HSC) is a wide-field imaging camera on the prime focus of the 8.2m Subaru telescope on the summit of Maunakea in Hawaii. A team of scientists from Japan, Taiwan and Princeton University is using HSC to carry out a 300-night multi-band imaging survey of the high-latitude sky. The survey includes three layers: the Wide layer will cover 1400 deg$^2$ in five broad bands ($grizy$), with a $5\,σ$ point-source depth of $r \approx 26$. The Deep layer covers a total of 26~deg$^2$ in four fields, going roughly a magnitude fainter, while the UltraDeep layer goes almost a magnitude fainter still in two pointings of HSC (a total of 3.5 deg$^2$). Here we describe the instrument, the science goals of the survey, and the survey strategy and data processing. This paper serves as an introduction to a special issue of the Publications of the Astronomical Society of Japan, which includes a large number of technical and scientific papers describing results from the early phases of this survey.
△ Less
Submitted 15 March, 2018; v1 submitted 19 April, 2017;
originally announced April 2017.
-
SUBARU prime focus spectrograph: integration, testing and performance for the first spectrograph
Authors:
F. Madec,
A. Le Fur,
D. Le Mignant,
K. Dohlen,
R. Barrette,
M. Belhadi,
S. Pascal,
S. Smee,
J. Gunn,
J. Le Merrer,
M. Lorred,
M. Jaquet,
P. Balard,
P. Blanchard,
W. Thao,
F. Roman,
V. Lapere,
JF Gabriel,
C. Loomis,
M. Golebiowski,
M. Hart,
L. Oliveira,
A. Oliveira,
N. Tamura,
A. Shimono
Abstract:
The Prime Focus Spectrograph (PFS) of the Subaru Measurement of Images and Redshifts (SuMIRe) project for Subaru telescope consists in four identical spectrographs fed by 600 fibers each. Each spectrograph is composed by an optical entrance unit that creates a collimated beam and distributes the light to three channels, two visibles and one near infrared. This paper presents the on-going effort fo…
▽ More
The Prime Focus Spectrograph (PFS) of the Subaru Measurement of Images and Redshifts (SuMIRe) project for Subaru telescope consists in four identical spectrographs fed by 600 fibers each. Each spectrograph is composed by an optical entrance unit that creates a collimated beam and distributes the light to three channels, two visibles and one near infrared. This paper presents the on-going effort for the tests & integration process for the first spectrograph channel: we have developed a detailed Assembly Integration and Test (AIT) plan, as well as the methods, detailed processes and I&T tools. We describe the tools we designed to assemble the parts and to test the performance of the spectrograph. We also report on the thermal acceptance tests we performed on the first visible camera unit. We also report on and discuss the technical difficulties that did appear during this integration phase. Finally, we detail the important logistic process that is require to transport the components from other country to Marseille.
△ Less
Submitted 3 August, 2016;
originally announced August 2016.
-
Visible camera cryostat design and performance for the SuMIRe Prime Focus Spectrograph (PFS)
Authors:
Stephen A. Smee,
James E. Gunn,
Mirek Golebiowski,
Stephen C. Hope,
Fabrice Madec,
Jean-Francois Gabriel,
Craig Loomis,
Arnaud Le Fur,
Kjetil Dohlen,
David Le Mignant,
Robert Barkhouser,
Michael Carr,
Murdock Hart,
Naoyuki Tamura,
Atsushi Shimono,
Naruhisa Takato
Abstract:
We describe the design and performance of the SuMIRe Prime Focus Spectrograph (PFS) visible camera cryostats. SuMIRe PFS is a massively multi-plexed ground-based spectrograph consisting of four identical spectrograph modules, each receiving roughly 600 fibers from a 2394 fiber robotic positioner at the prime focus. Each spectrograph module has three channels covering wavelength ranges 380~nm -- 64…
▽ More
We describe the design and performance of the SuMIRe Prime Focus Spectrograph (PFS) visible camera cryostats. SuMIRe PFS is a massively multi-plexed ground-based spectrograph consisting of four identical spectrograph modules, each receiving roughly 600 fibers from a 2394 fiber robotic positioner at the prime focus. Each spectrograph module has three channels covering wavelength ranges 380~nm -- 640~nm, 640~nm -- 955~nm, and 955~nm -- 1.26~um, with the dispersed light being imaged in each channel by a f/1.07 vacuum Schmidt camera. The cameras are very large, having a clear aperture of 300~mm at the entrance window, and a mass of $\sim$280~kg. In this paper we describe the design of the visible camera cryostats and discuss various aspects of cryostat performance.
△ Less
Submitted 3 August, 2016;
originally announced August 2016.
-
The survey operation software system development for Prime Focus Spectrograph (PFS) on Subaru Telescope
Authors:
Atsushi Shimono,
Naoyuki Tamura,
Naruhisa Takato,
Naoki Yasuda,
Nao Suzuki,
Craig P. Loomis,
Robert H. Lupton,
Yuki Moritani,
Kiyoto Yabe
Abstract:
The Prime Focus Spectrograph (PFS) is a wide-field, multi-object spectrograph accommodating 2394 fibers to observe the sky at the prime focus of the Subaru telescope. The software system to operate a spectroscopic survey is structured by the four packages: Instrument control software, exposure targeting software, data reduction pipeline, and survey planning and tracking software. In addition, we o…
▽ More
The Prime Focus Spectrograph (PFS) is a wide-field, multi-object spectrograph accommodating 2394 fibers to observe the sky at the prime focus of the Subaru telescope. The software system to operate a spectroscopic survey is structured by the four packages: Instrument control software, exposure targeting software, data reduction pipeline, and survey planning and tracking software. In addition, we operate a database system where various information such as properties of target objects, instrument configurations, and observation conditions is stored and is organized via a standardized data model for future references to update survey plans and to scientific researches. In this article, we present an overview of the software system and describe the workflows that need to be performed in the PFS operation, with some highlights on the database that organizes various information from sub-processes in the survey operation, and on the process of fiber configuration from the software perspectives.
△ Less
Submitted 3 August, 2016;
originally announced August 2016.
-
Prime Focus Spectrograph (PFS) for the Subaru Telescope: Overview, recent progress, and future perspectives
Authors:
Naoyuki Tamura,
Naruhisa Takato,
Atsushi Shimono,
Yuki Moritani,
Kiyoto Yabe,
Yuki Ishizuka,
Akitoshi Ueda,
Yukiko Kamata,
Hrand Aghazarian,
Stephane Arnouts,
Gabriel Barban,
Robert H. Barkhouser,
Renato C. Borges,
David F. Braun,
Michael A. Carr,
Pierre-Yves Chabaud,
Yin-Chang Chang,
Hsin-Yo Chen,
Masashi Chiba,
Richard C. Y. Chou,
You-Hua Chu,
Judith G. Cohen,
Rodrigo P. de Almeida,
Antonio C. de Oliveira,
Ligia S. de Oliveira
, et al. (75 additional authors not shown)
Abstract:
PFS (Prime Focus Spectrograph), a next generation facility instrument on the 8.2-meter Subaru Telescope, is a very wide-field, massively multiplexed, optical and near-infrared spectrograph. Exploiting the Subaru prime focus, 2394 reconfigurable fibers will be distributed over the 1.3 deg field of view. The spectrograph has been designed with 3 arms of blue, red, and near-infrared cameras to simult…
▽ More
PFS (Prime Focus Spectrograph), a next generation facility instrument on the 8.2-meter Subaru Telescope, is a very wide-field, massively multiplexed, optical and near-infrared spectrograph. Exploiting the Subaru prime focus, 2394 reconfigurable fibers will be distributed over the 1.3 deg field of view. The spectrograph has been designed with 3 arms of blue, red, and near-infrared cameras to simultaneously observe spectra from 380nm to 1260nm in one exposure at a resolution of ~1.6-2.7A. An international collaboration is developing this instrument under the initiative of Kavli IPMU. The project is now going into the construction phase aiming at undertaking system integration in 2017-2018 and subsequently carrying out engineering operations in 2018-2019. This article gives an overview of the instrument, current project status and future paths forward.
△ Less
Submitted 3 August, 2016;
originally announced August 2016.
-
Metrology Camera System of Prime Focus Spectrograph for Subaru Telescope
Authors:
Shiang-Yu Wang,
Richard C. Y. Chou,
Pin-Jie Huang,
Hung-Hsu Ling,
Jennifer Karr,
Yin-Chang Chang,
Yen-Shan Hu,
Shu-Fu Hsu,
Hsin-Yo Chen,
James E. Gunn,
Dan J. Reiley,
Naoyuki Tamura,
Naruhisa Takato,
Atsushi Shimono
Abstract:
The Prime Focus Spectrograph (PFS) is a new optical/near-infrared multi-fiber spectrograph designed for the prime focus of the 8.2m Subaru telescope. PFS will cover a 1.3 degree diameter field with 2394 fibers to complement the imaging capabilities of Hyper SuprimeCam. To retain high throughput, the final positioning accuracy between the fibers and observing targets of PFS is required to be less t…
▽ More
The Prime Focus Spectrograph (PFS) is a new optical/near-infrared multi-fiber spectrograph designed for the prime focus of the 8.2m Subaru telescope. PFS will cover a 1.3 degree diameter field with 2394 fibers to complement the imaging capabilities of Hyper SuprimeCam. To retain high throughput, the final positioning accuracy between the fibers and observing targets of PFS is required to be less than 10um. The metrology camera system (MCS) serves as the optical encoder of the fiber motors for the configuring of fibers. MCS provides the fiber positions within a 5um error over the 45 cm focal plane. The information from MCS will be fed into the fiber positioner control system for the closed loop control. MCS will be located at the Cassegrain focus of Subaru telescope in order to to cover the whole focal plane with one 50M pixel Canon CMOS camera. It is a 380mm Schmidt type telescope which generates a uniform spot size with a 10 micron FWHM across the field for reasonable sampling of PSF. Carbon fiber tubes are used to provide a stable structure over the operating conditions without focus adjustments. The CMOS sensor can be read in 0.8s to reduce the overhead for the fiber configuration. The positions of all fibers can be obtained within 0.5s after the readout of the frame. This enables the overall fiber configuration to be less than 2 minutes. MCS will be installed inside a standard Subaru Cassgrain Box. All components that generate heat are located inside a glycol cooled cabinet to reduce the possible image motion due to heat. The optics and camera for MCS have been delivered and tested. The mechanical parts and supporting structure are ready as of spring 2016. The integration of MCS will start in the summer of 2016.
△ Less
Submitted 1 August, 2016;
originally announced August 2016.
-
The Current Status of Prime Focus Instrument of Subaru Prime Focus Spectrograph
Authors:
Shiang-Yu Wang,
Mark A. Schwochert,
Pin-Jie Huang,
Hsin-Yo Chen,
Masahiko Kimura,
Richard C. Y. Chou,
Yin-Chang Chang,
Yen-Sang Hu,
Hung-Hsu Ling,
Chaz N. Morantz,
Dan J. Reiley,
Peter Mao,
David F. Braun,
Chih-Yi Wen,
Chi-Hung Yan,
Jennifer Karr,
James E. Gunn,
Graham Murray,
Naoyuki Tamura,
Naruhisa Takato,
Atsushi Shimono,
Decio Ferreira,
Leandro Henriqu dos Santosh,
Ligia Souza Oliveira,
Antonio Cesar de Oliveira
, et al. (1 additional authors not shown)
Abstract:
The Prime Focus Spectrograph (PFS) is a new optical/near-infrared multi-fiber spectrograph design for the prime focus of the 8.2m Subaru telescope. PFS will cover 1.3 degree diameter field with 2394 fibers to complement the imaging capability of Hyper SuprimeCam (HSC). The prime focus unit of PFS called Prime Focus Instrument (PFI) provides the interface with the top structure of Subaru telescope…
▽ More
The Prime Focus Spectrograph (PFS) is a new optical/near-infrared multi-fiber spectrograph design for the prime focus of the 8.2m Subaru telescope. PFS will cover 1.3 degree diameter field with 2394 fibers to complement the imaging capability of Hyper SuprimeCam (HSC). The prime focus unit of PFS called Prime Focus Instrument (PFI) provides the interface with the top structure of Subaru telescope and also accommodates the optical bench in which Cobra fiber positioners are located. In addition, the acquisition and guiding cameras (AGCs), the optical fiber positioner system, the cable wrapper, the fiducial fibers, illuminator, and viewer, the field element, and the telemetry system are located inside the PFI. The mechanical structure of the PFI was designed with special care such that its deflections sufficiently match those of the HSC's Wide Field Corrector (WFC) so the fibers will stay on targets over the course of the observations within the required accuracy. In this report, the latest status of PFI development will be given including the performance of PFI components, the setup and performance of the integration and testing equipment.
△ Less
Submitted 1 August, 2016;
originally announced August 2016.
-
Prime Focus Spectrograph for the Subaru telescope: massively multiplexed optical and near-infrared fiber spectrograph
Authors:
Hajime Sugai,
Naoyuki Tamura,
Hiroshi Karoji,
Atsushi Shimono,
Naruhisa Takato,
Masahiko Kimura,
Youichi Ohyama,
Akitoshi Ueda,
Hrand Aghazarian,
Marcio Vital de Arruda,
Robert H. Barkhouser,
Charles L. Bennett,
Steve Bickerton,
Alexandre Bozier,
David F. Braun,
Khanh Bui,
Christopher M. Capocasale,
Michael A. Carr,
Bruno Castilho,
Yin-Chang Chang,
Hsin-Yo Chen,
Richard C. Y. Chou,
Olivia R. Dawson,
Richard G. Dekany,
Eric M. Ek
, et al. (59 additional authors not shown)
Abstract:
The Prime Focus Spectrograph (PFS) is an optical/near-infrared multifiber spectrograph with 2394 science fibers distributed across a 1.3-deg diameter field of view at the Subaru 8.2-m telescope. The wide wavelength coverage from 0.38 μm to 1.26 μm, with a resolving power of 3000, simultaneously strengthens its ability to target three main survey programs: cosmology, galactic archaeology and galaxy…
▽ More
The Prime Focus Spectrograph (PFS) is an optical/near-infrared multifiber spectrograph with 2394 science fibers distributed across a 1.3-deg diameter field of view at the Subaru 8.2-m telescope. The wide wavelength coverage from 0.38 μm to 1.26 μm, with a resolving power of 3000, simultaneously strengthens its ability to target three main survey programs: cosmology, galactic archaeology and galaxy/AGN evolution. A medium resolution mode with a resolving power of 5000 for 0.71 μm to 0.89 μm will also be available by simply exchanging dispersers. We highlight some of the technological aspects of the design. To transform the telescope focal ratio, a broad-band coated microlens is glued to each fiber tip. A higher transmission fiber is selected for the longest part of the cable system, optimizing overall throughput; a fiber with low focal ratio degradation is selected for the fiber-positioner and fiber-slit components, minimizing the effects of fiber movements and fiber bending. Fiber positioning will be performed by a positioner consisting of two stages of piezo-electric rotary motors. The positions of these motors are measured by taking an image of artificially back-illuminated fibers with the metrology camera located in the Cassegrain container; the fibers are placed in the proper location by iteratively measuring and then adjusting the positions of the motors. Target light reaches one of the four identical fast-Schmidt spectrograph modules, each with three arms. The PFS project has passed several project-wide design reviews and is now in the construction phase.
△ Less
Submitted 2 July, 2015;
originally announced July 2015.
-
The near infrared camera for the Subaru Prime Focus Spectrograph
Authors:
Stephen A. Smee,
James E. Gunn,
Mirek Golebiowski,
Robert Barkhouser,
Sebastien Vives,
Sandrine Pascal,
Michael Carr,
Stephen C. Hope,
Craig Loomis,
Murdock Hart,
Hajime Sugai,
Naoyuki Tamura,
Atsushi Shimono
Abstract:
We present the detailed design of the near infrared camera for the SuMIRe (Subaru Measurement of Images and Redshifts) Prime Focus Spectrograph (PFS) being developed for the Subaru Telescope. The PFS spectrograph is designed to collect spectra from 2394 objects simultaneously, covering wavelengths that extend from 380 nm - 1.26 um. The spectrograph is comprised of four identical spectrograph modul…
▽ More
We present the detailed design of the near infrared camera for the SuMIRe (Subaru Measurement of Images and Redshifts) Prime Focus Spectrograph (PFS) being developed for the Subaru Telescope. The PFS spectrograph is designed to collect spectra from 2394 objects simultaneously, covering wavelengths that extend from 380 nm - 1.26 um. The spectrograph is comprised of four identical spectrograph modules, with each module collecting roughly 600 spectra from a robotic fiber positioner at the telescope prime focus. Each spectrograph module will have two visible channels covering wavelength ranges 380 nm - 640 nm and 640 nm - 955 nm, and one near infrared (NIR) channel with a wavelength range 955 nm - 1.26 um. Dispersed light in each channel is imaged by a 300 mm focal length, f/1.07, vacuum Schmidt camera onto a 4k x 4k, 15 um pixel, detector format. For the NIR channel a HgCdTe substrate-removed Teledyne 1.7 um cutoff device is used. In the visible channels, CCDs from Hamamatsu are used. These cameras are large, having a clear aperture of 300 mm at the entrance window, and a mass of ~ 250 kg.
Like the two visible channel cameras, the NIR camera contains just four optical elements: a two-element refractive corrector, a Mangin mirror, and a field flattening lens. This simple design produces very good imaging performance considering the wide field and wavelength range, and it does so in large part due to the use of a Mangin mirror (a lens with a reflecting rear surface) for the Schmidt primary. In the case of the NIR camera, the rear reflecting surface is a dichroic, which reflects in-band wavelengths and transmits wavelengths beyond 1.26 um. This, combined with a thermal rejection filter coating on the rear surface of the second corrector element, greatly reduces the out-of-band thermal radiation that reaches the detector.
△ Less
Submitted 12 August, 2014;
originally announced August 2014.
-
Prime Focus Instrument of Prime Focus Spectrograph for Subaru Telescope
Authors:
Shiang-Yu Wang,
David F. Braun,
Mark A. Schwochert,
Pin-Jie Huang,
Masahiko Kimura,
Hsin-Yo Chen,
Dan J. Reiley,
Peter Mao,
Charles D. Fisher,
Naoyuki Tamura,
Yin-Chang Chang,
Yen-Sang Hu,
Hung-Hsu Ling,
Chih-Yi Wen,
Richard C. -Y. Chou,
Naruhisa Takato,
Hajime Sugai,
Youichi Ohyama,
Hiroshi Karoji,
Atsushi Shimono,
Akitoshi Ueda
Abstract:
The Prime Focus Spectrograph (PFS) is a new optical/near-infrared multi-fiber spectrograph design for the prime focus of the 8.2m Subaru telescope. PFS will cover 1.3 degree diameter field with 2394 fibers to complement the imaging capability of Hyper SuprimeCam (HSC). The prime focus unit of PFS called Prime Focus Instrument (PFI) provides the interface with the top structure of Subaru telescope…
▽ More
The Prime Focus Spectrograph (PFS) is a new optical/near-infrared multi-fiber spectrograph design for the prime focus of the 8.2m Subaru telescope. PFS will cover 1.3 degree diameter field with 2394 fibers to complement the imaging capability of Hyper SuprimeCam (HSC). The prime focus unit of PFS called Prime Focus Instrument (PFI) provides the interface with the top structure of Subaru telescope and also accommodates the optical bench in which Cobra fiber positioners are located. In addition, the acquisition and guiding (A&G) cameras, the optical fiber positioner system, the cable wrapper, the fiducial fibers, illuminator, and viewer, the field element, and the telemetry system are located inside the PFI. The mechanical structure of the PFI was designed with special care such that its deflections sufficiently match those of the HSC Wide Field Corrector (WFC) so the fibers will stay on targets over the course of the observations within the required accuracy.
△ Less
Submitted 12 August, 2014;
originally announced August 2014.
-
Metrology Camera System of Prime Focus Spectrograph for Subaru Telescope
Authors:
Shiang-Yu Wang,
Richard C. -Y. Chou,
Yin-Chang Chang,
Pin-Jie Huang,
Yen-Sang Hu,
Hsin-Yo Chen,
Naoyuki Tamura,
Naruhisa Takato,
Hung-Hsu Ling,
James E. Gunn,
Jennifer Karr,
Chi-Hung Yan,
Peter Mao,
Youichi Ohyama,
Hiroshi Karoji,
Hajime Sugai,
Atsushi Shimono
Abstract:
The Prime Focus Spectrograph (PFS) is a new optical/near-infrared multi-fiber spectrograph designed for the prime focus of the 8.2m Subaru telescope. The metrology camera system of PFS serves as the optical encoder of the COBRA fiber motors for the configuring of fibers. The 380mm diameter aperture metrology camera will locate at the Cassegrain focus of Subaru telescope to cover the whole focal pl…
▽ More
The Prime Focus Spectrograph (PFS) is a new optical/near-infrared multi-fiber spectrograph designed for the prime focus of the 8.2m Subaru telescope. The metrology camera system of PFS serves as the optical encoder of the COBRA fiber motors for the configuring of fibers. The 380mm diameter aperture metrology camera will locate at the Cassegrain focus of Subaru telescope to cover the whole focal plane with one 50M pixel Canon CMOS sensor. The metrology camera is designed to provide the fiber position information within 5μm error over the 45cm focal plane. The positions of all fibers can be obtained within 1s after the exposure is finished. This enables the overall fiber configuration to be less than 2 minutes.
△ Less
Submitted 12 August, 2014;
originally announced August 2014.
-
Design and performance of a F/#-conversion microlens for Prime Focus Spectrograph at Subaru Telescope
Authors:
Naruhisa Takato,
Yoko Tanaka,
James E. Gunn,
Naoyuki Tamura,
Atsushi Shimono,
Hajime Sugai,
Hiroshi Karoji,
Akitoshi Ueda,
Kouichi Waseda,
Masahiko Kimura,
Youichi Ohyama
Abstract:
The PFS is a multi-object spectrograph fed by 2394 fibers at the prime focus of Subaru telescope. Since the F/# at the prime focus is too fast for the spectrograph, we designed a small concave-plano negative lens to be attached to the tip of each fiber that converts the telescope beam (F/2.2) to F/2.8. We optimized the lens to maximize the number of rays that can be confined inside F/2.8 while mai…
▽ More
The PFS is a multi-object spectrograph fed by 2394 fibers at the prime focus of Subaru telescope. Since the F/# at the prime focus is too fast for the spectrograph, we designed a small concave-plano negative lens to be attached to the tip of each fiber that converts the telescope beam (F/2.2) to F/2.8. We optimized the lens to maximize the number of rays that can be confined inside F/2.8 while maintaining a 1.28 magnification. The microlenses are manufactured by glass molding, and an ultra-broadband AR coating (<1.5% for lambda=0.38-1.26 um) will be applied to the front surface.
△ Less
Submitted 12 August, 2014;
originally announced August 2014.
-
Fiber Optical Cable and Connector System (FOCCoS) for PFS/Subaru
Authors:
Antonio Cesar de Oliveira,
Lígia Souza de Oliveira,
Márcio V. de Arruda,
Lucas Souza Marrara,
Leandro H. dos Santos,
Décio Ferreira,
Jesulino B. dos Santos,
Josimar A. Rosa,
Orlando V. Junior,
Jeferson M. Pereira,
Bruno Castilho,
Clemens Gneiding,
Laerte S. Junior,
Claudia M. de Oliveira,
James E. Gunn,
Akitoshi Ueda,
Naruhisa Takato,
Atsushi Shimono,
Hajime Sugai,
Hiroshi Karoji,
Masahiko Kimura,
Naoyuki Tamura,
Shiang-Yu Wang,
Graham Murray,
David Le Mignant
, et al. (7 additional authors not shown)
Abstract:
FOCCoS, Fiber Optical Cable and Connector System, has the main function of capturing the direct light from the focal plane of Subaru Telescope using optical fibers, each one with a microlens in its tip, and conducting this light through a route containing connectors to a set of four spectrographs. The optical fiber cable is divided in 3 different segments called Cable A, Cable B and Cable C. Multi…
▽ More
FOCCoS, Fiber Optical Cable and Connector System, has the main function of capturing the direct light from the focal plane of Subaru Telescope using optical fibers, each one with a microlens in its tip, and conducting this light through a route containing connectors to a set of four spectrographs. The optical fiber cable is divided in 3 different segments called Cable A, Cable B and Cable C. Multi-fibers connectors assure precise connection among all optical fibers of the segments, providing flexibility for instrument changes. To assure strong and accurate connection, these sets are arranged inside two types of assemblies: the Tower Connector, for connection between Cable C and Cable B; and the Gang Connector, for connection between Cable B and Cable A. Throughput tests were made to evaluate the efficiency of the connections. A lifetime test connection is in progress. Cable C is installed inside the PFI, Prime Focus Instrument, where each fiber tip with a microlens is bonded to the end of the shaft of a 2-stage piezo-electric rotatory motor positioner; this assembly allows each fiber to be placed anywhere within its patrol region, which is 9.5mm diameter.. Each positioner uses a fiber arm to support the ferrule, the microlens, and the optical fiber. 2400 of these assemblies are arranged on a motor bench plate in a hexagonal-closed-packed disposition.
△ Less
Submitted 12 August, 2014;
originally announced August 2014.
-
Progress with the Prime Focus Spectrograph for the Subaru Telescope: a massively multiplexed optical and near-infrared fiber spectrograph
Authors:
Hajime Sugai,
Naoyuki Tamura,
Hiroshi Karoji,
Atsushi Shimono,
Naruhisa Takato,
Masahiko Kimura,
Youichi Ohyama,
Akitoshi Ueda,
Hrand Aghazarian,
Marcio Vital de Arruda,
Robert H. Barkhouser,
Charles L. Bennett,
Steve Bickerton,
Alexandre Bozier,
David F. Braun,
Khanh Bui,
Christopher M. Capocasale,
Michael A. Carr,
Bruno Castilho,
Yin-Chang Chang,
Hsin-Yo Chen,
Richard C. Y. Chou,
Olivia R. Dawson,
Richard G. Dekany,
Eric M. Ek
, et al. (59 additional authors not shown)
Abstract:
The Prime Focus Spectrograph (PFS) is an optical/near-infrared multi-fiber spectrograph with 2394 science fibers, which are distributed in 1.3 degree diameter field of view at Subaru 8.2-meter telescope. The simultaneous wide wavelength coverage from 0.38 um to 1.26 um, with the resolving power of 3000, strengthens its ability to target three main survey programs: cosmology, Galactic archaeology,…
▽ More
The Prime Focus Spectrograph (PFS) is an optical/near-infrared multi-fiber spectrograph with 2394 science fibers, which are distributed in 1.3 degree diameter field of view at Subaru 8.2-meter telescope. The simultaneous wide wavelength coverage from 0.38 um to 1.26 um, with the resolving power of 3000, strengthens its ability to target three main survey programs: cosmology, Galactic archaeology, and galaxy/AGN evolution. A medium resolution mode with resolving power of 5000 for 0.71 um to 0.89 um also will be available by simply exchanging dispersers. PFS takes the role for the spectroscopic part of the Subaru Measurement of Images and Redshifts project, while Hyper Suprime-Cam works on the imaging part. To transform the telescope plus WFC focal ratio, a 3-mm thick broad-band coated glass-molded microlens is glued to each fiber tip. A higher transmission fiber is selected for the longest part of cable system, while one with a better FRD performance is selected for the fiber-positioner and fiber-slit components, given the more frequent fiber movements and tightly curved structure. Each Fiber positioner consists of two stages of piezo-electric rotary motors. Its engineering model has been produced and tested. Fiber positioning will be performed iteratively by taking an image of artificially back-illuminated fibers with the Metrology camera located in the Cassegrain container. The camera is carefully designed so that fiber position measurements are unaffected by small amounts of high special-frequency inaccuracies in WFC lens surface shapes. Target light carried through the fiber system reaches one of four identical fast-Schmidt spectrograph modules, each with three arms. Prototype VPH gratings have been optically tested. CCD production is complete, with standard fully-depleted CCDs for red arms and more-challenging thinner fully-depleted CCDs with blue-optimized coating for blue arms.
△ Less
Submitted 12 August, 2014;
originally announced August 2014.
-
Transboundary secondary organic aerosol in western Japan indicated by stable carbon isotope ratio of low volatile water-soluble organic carbon and signal at m/z 44 in organic aerosol mass spectra
Authors:
Satoshi Irei,
Akinori Takami,
Masahiko Hayashi,
Yasuhiro Sadanaga,
Keiichiro Hara,
Naoki Kaneyasu,
Kei Sato,
Takemitsu Arakaki,
Shiro Hatakeyama,
Hiroshi Bandow,
Toshihide Hikida,
Akio Shimono
Abstract:
Field studies were conducted in the winter of 2010 at two rural sites and an urban site in western Japan, and filter samples of total suspended particulate matter were collected every 24-h and analyzed for concentration and stable carbon isotope ratio (delta13C) of low volatile water-soluble organic carbon (LV-WSOC). Concentration of major chemical species in fine aerosol (<1.0 micron) was also me…
▽ More
Field studies were conducted in the winter of 2010 at two rural sites and an urban site in western Japan, and filter samples of total suspended particulate matter were collected every 24-h and analyzed for concentration and stable carbon isotope ratio (delta13C) of low volatile water-soluble organic carbon (LV-WSOC). Concentration of major chemical species in fine aerosol (<1.0 micron) was also measured in real time by Aerodyne aerosol mass spectrometers. Oxidation state of organic aerosol was evaluated using the proportion of signal at m/z 44 (fragment ions of carboxyl group) to the sum of all m/z signals of organic mass spectra (f44). Analyses show a high correlation between LV-WSOC and m/z 44 concentrations, suggesting that the LV-WSOC is likely associated with water soluble carboxylic acids in the fine aerosol. Plots of delta13C of LV-WSOC versus f44 exhibit systematic trends at the rural sites and random variation at the urban site. The systematic trends qualitatively agree with a simple binary mixture model of secondary organic aerosol and background LV-WSOC that has delta13C of -17 permil or higher and f44 of approximately 0.06, respectively. Comparison with references suggests that the source of background LV-WSOC is likely biomass burning of C4 plants.
△ Less
Submitted 20 May, 2014; v1 submitted 7 September, 2013;
originally announced September 2013.
-
Ionization Source of a Minor-axis Cloud in the Outer Halo of M82
Authors:
K. Matsubayashi,
H. Sugai,
A. Shimono,
T. Hattori,
S. Ozaki,
T. Yoshikawa,
Y. Taniguchi,
T. Nagao,
M. Kajisawa,
Y. Shioya,
J. Bland-Hawthorn
Abstract:
The M82 `cap' is a gas cloud at a projected radius of 11.6 kpc along the minor axis of this well known superwind source. The cap has been detected in optical line emission and X-ray emission and therefore provides an important probe of the wind energetics. In order to investigate the ionization source of the cap, we observed it with the Kyoto3DII Fabry-Perot instrument mounted on the Subaru Telesc…
▽ More
The M82 `cap' is a gas cloud at a projected radius of 11.6 kpc along the minor axis of this well known superwind source. The cap has been detected in optical line emission and X-ray emission and therefore provides an important probe of the wind energetics. In order to investigate the ionization source of the cap, we observed it with the Kyoto3DII Fabry-Perot instrument mounted on the Subaru Telescope. Deep continuum, Ha, [NII]6583/Ha, and [SII]6716,6731/Ha maps were obtained with sub-arcsecond resolution. The superior spatial resolution compared to earlier studies reveals a number of bright Ha emitting clouds within the cap. The emission line widths (< 100 km s^-1 FWHM) and line ratios in the newly identified knots are most reasonably explained by slow to moderate shocks velocities (v_shock = 40--80 km s^-1) driven by a fast wind into dense clouds. The momentum input from the M82 nuclear starburst region is enough to produce the observed shock. Consequently, earlier claims of photoionization by the central starburst are ruled out because they cannot explain the observed fluxes of the densest knots unless the UV escape fraction is very high (f_esc > 60%), i.e., an order of magnitude higher than observed in dwarf galaxies to date. Using these results, we discuss the evolutionary history of the M82 superwind. Future UV/X-ray surveys are expected to confirm that the temperature of the gas is consistent with our moderate shock model.
△ Less
Submitted 30 October, 2012;
originally announced October 2012.
-
FOCCoS for Subaru PFS
Authors:
Antonio Cesar de Oliveira,
Ligia Souza de Oliveira,
Marcio Vital de Arruda,
Jesulino Bispo dos Santos,
Lucas Souza Marrara,
Vanessa Bawden de Paula Macanhan,
Joao Batista de Carvalho Oliveira,
Rodrigo de Paiva Vilacca,
Tania Pereira Dominici,
Laerte Sodre Junior,
Claudia Mendes de Oliveira,
Hiroshi Karoji,
Hajime Sugai,
Atsushi Shimono,
Naoyuki Tamura,
Naruhisa Takato,
Akitoshi Ueda
Abstract:
The Fiber Optical Cable and Connector System (FOCCoS), provides optical connection between 2400 positioners and a set of spectrographs by an optical fibers cable as part of Subaru PFS instrument. Each positioner retains one fiber entrance attached at a microlens, which is responsible for the F-ratio transformation into a larger one so that difficulties of spectrograph design are eased. The optical…
▽ More
The Fiber Optical Cable and Connector System (FOCCoS), provides optical connection between 2400 positioners and a set of spectrographs by an optical fibers cable as part of Subaru PFS instrument. Each positioner retains one fiber entrance attached at a microlens, which is responsible for the F-ratio transformation into a larger one so that difficulties of spectrograph design are eased. The optical fibers cable will be segmented in 3 parts at long of the way, cable A, cable B and cable C, connected by a set of multi-fibers connectors. Cable B will be permanently attached at the Subaru telescope. The first set of multi-fibers connectors will connect the cable A to the cable C from the spectrograph system at the Nasmith platform. The cable A, is an extension of a pseudo-slit device obtained with the linear disposition of the extremities of the optical fibers and fixed by epoxy at a base of composite substrate. The second set of multi-fibers connectors will connect the other extremity of cable A to the cable B, which is part of the positioner's device structure. The optical fiber under study for this project is the Polymicro FBP120170190, which has shown very encouraging results. The kind of test involves FRD measurements caused by stress induced by rotation and twist of the fiber extremity, similar conditions to those produced by positioners of the PFS instrument. The multi-fibers connector under study is produced by USCONEC Company and may connect 32 optical fibers. The tests involve throughput of light and stability after many connections and disconnections. This paper will review the general design of the FOCCoS subsystem, methods used to fabricate the devices involved and the tests results necessary to evaluate the total efficiency of the set.
△ Less
Submitted 9 October, 2012;
originally announced October 2012.
-
The metrology cameras for Subaru PFS and FMOS
Authors:
Shiang-Yu Wang,
Yen-Shan Hu,
Chi-Hung Yan,
Yin-Chang Chang,
Naoyuki Tamura,
Naruhisa Takato,
Atsushi Shimono,
Jennifer Karr,
Youichi Ohyama,
Hsin-Yo Chen,
Hung-Hsu Ling,
Hiroshi Karoji,
Hajime Sugai,
Akitoshi Ueda
Abstract:
The Prime Focus Spectrograph (PFS) is a new multi-fiber spectrograph on Subaru telescope. PFS will cover around 1.4 degree diameter field with ~2400 fibers. To ensure precise positioning of the fibers, a metrology camera is designed to provide the fiber position information within 5 μm error. The final positioning accuracy of PFS is targeted to be better than 10 μm. The metrology camera will locat…
▽ More
The Prime Focus Spectrograph (PFS) is a new multi-fiber spectrograph on Subaru telescope. PFS will cover around 1.4 degree diameter field with ~2400 fibers. To ensure precise positioning of the fibers, a metrology camera is designed to provide the fiber position information within 5 μm error. The final positioning accuracy of PFS is targeted to be better than 10 μm. The metrology camera will locate at the Cassegrain focus of Subaru telescope to cover the whole focal plane. The PFS metrology camera will also serve for the existing multi-fiber infrared spectrograph FMOS.
△ Less
Submitted 9 October, 2012;
originally announced October 2012.
-
The system software development for Prime Focus Spectrogrsph on Subaru Telescope
Authors:
Atsushi Shimono,
Naoyuki Tamura,
Hajime Sugai,
Hiroshi Karoji
Abstract:
The Prime Focus Spectrograph (PFS) is a wide field multi-fiber spectrograph using the prime focus of the Subaru telescope, which is capable of observing up to 2400 astronomical objects simultaneously.
The instrument control software will manage the observation procedure communicateing with subsystems such as the fiber positioner "COBRA", the metrology camera system, and the spectrograph and came…
▽ More
The Prime Focus Spectrograph (PFS) is a wide field multi-fiber spectrograph using the prime focus of the Subaru telescope, which is capable of observing up to 2400 astronomical objects simultaneously.
The instrument control software will manage the observation procedure communicateing with subsystems such as the fiber positioner "COBRA", the metrology camera system, and the spectrograph and camera systems. Before an exposure starts, the instrument control system needs to access to a database where target lists provided by observers are stored in advance, and accurately position fibers onto astronomical targets as requested therein. This fiber positioning will be carried out interacting with the metrology system which measures the fiber positions. In parallel, the control system can issue a command to point the telescope to the target position and to rotate the instrument rotator. Finally the telescope pointing and the rotator angle will be checked by imaging bright stars and checking their positions on the auto-guide and acquisition cameras. After the exposure finishes, the data are collected from the detector systems and are finalized as FITS files to archive with necessary information.
The observation preparation software is required, given target lists and a sequence of observation, to find optimal fiber allocations with maximizing the number of guide stars. To carry out these operations efficiently, the control system will be integrated seamlessly with a database system which will store information necessary for observation execution such as fiber configurations.
In this article, the conceptual system design of the observation preparation software and the instrument control software will be presented.
△ Less
Submitted 9 October, 2012;
originally announced October 2012.
-
Prime Focus Spectrograph - Subaru's future -
Authors:
Hajime Sugai,
Hiroshi Karoji,
Naruhisa Takato,
Naoyuki Tamura,
Atsushi Shimono,
Youichi Ohyama,
Akitoshi Ueda,
Hung-Hsu Ling,
Marcio Vital de Arruda,
Robert H. Barkhouser,
Charles L. Bennett,
Steve Bickerton,
David F. Braun,
Robin J. Bruno,
Michael A. Carr,
João Batista de Carvalho Oliveira,
Yin-Chang Chang,
Hsin-Yo Chen,
Richard G. Dekany,
Tania Pereira Dominici,
Richard S. Ellis,
Charles D. Fisher,
James E. Gunn,
Timothy M. Heckman,
Paul T. P. Ho
, et al. (29 additional authors not shown)
Abstract:
The Prime Focus Spectrograph (PFS) of the Subaru Measurement of Images and Redshifts (SuMIRe) project has been endorsed by Japanese community as one of the main future instruments of the Subaru 8.2-meter telescope at Mauna Kea, Hawaii. This optical/near-infrared multi-fiber spectrograph targets cosmology with galaxy surveys, Galactic archaeology, and studies of galaxy/AGN evolution. Taking advanta…
▽ More
The Prime Focus Spectrograph (PFS) of the Subaru Measurement of Images and Redshifts (SuMIRe) project has been endorsed by Japanese community as one of the main future instruments of the Subaru 8.2-meter telescope at Mauna Kea, Hawaii. This optical/near-infrared multi-fiber spectrograph targets cosmology with galaxy surveys, Galactic archaeology, and studies of galaxy/AGN evolution. Taking advantage of Subaru's wide field of view, which is further extended with the recently completed Wide Field Corrector, PFS will enable us to carry out multi-fiber spectroscopy of 2400 targets within 1.3 degree diameter. A microlens is attached at each fiber entrance for F-ratio transformation into a larger one so that difficulties of spectrograph design are eased. Fibers are accurately placed onto target positions by positioners, each of which consists of two stages of piezo-electric rotary motors, through iterations by using back-illuminated fiber position measurements with a wide-field metrology camera. Fibers then carry light to a set of four identical fast-Schmidt spectrographs with three color arms each: the wavelength ranges from 0.38 μm to 1.3 μm will be simultaneously observed with an average resolving power of 3000. Before and during the era of extremely large telescopes, PFS will provide the unique capability of obtaining spectra of 2400 cosmological/astrophysical targets simultaneously with an 8-10 meter class telescope. The PFS collaboration, led by IPMU, consists of USP/LNA in Brazil, Caltech/JPL, Princeton, & JHU in USA, LAM in France, ASIAA in Taiwan, and NAOJ/Subaru.
△ Less
Submitted 9 October, 2012;
originally announced October 2012.
-
Spatially Resolved Spectroscopic Observations of a Possible E+A Progenitor SDSS J160241.00+521426.9
Authors:
Kazuya Matsubayashi,
Masafumi Yagi,
Tomotsugu Goto,
Akira Akita,
Hajime Sugai,
Atsushi Kawai,
Atsushi Shimono,
Takashi Hattori
Abstract:
In order to investigate the evolution of E+A galaxies, we observed a galaxy SDSS J160241.00+521426.9, a possible E+A progenitor which shows both emission and strong Balmer absorptions, and its neighbor galaxy. We used the integral field spectroscopic mode of the Kyoto Tridimensional Spectrograph (Kyoto3DII), mounted on the University of Hawaii 88-inch telescope located on Mauna Kea, and the slit-s…
▽ More
In order to investigate the evolution of E+A galaxies, we observed a galaxy SDSS J160241.00+521426.9, a possible E+A progenitor which shows both emission and strong Balmer absorptions, and its neighbor galaxy. We used the integral field spectroscopic mode of the Kyoto Tridimensional Spectrograph (Kyoto3DII), mounted on the University of Hawaii 88-inch telescope located on Mauna Kea, and the slit-spectroscopic mode of the Faint Object Camera and Spectrograph (FOCAS) on the Subaru Telescope. We found a strong Balmer absorption region in the center of the galaxy and an emission-line region located 2 kpc from the center, in the direction of its neighbor galaxy. The recession velocities of the galaxy and its neighbor galaxy differ only by 100 km s^-1, which suggests that they are a physical pair and would have been interacting. Comparing observed Lick indices of Balmer lines and color indices with those predicted from stellar population synthesis models, we find that a suddenly quenched star-formation scenario is plausible for the star-formation history of the central region. We consider that star formation started in the galaxy due to galaxy interactions and was quenched in the central region, whereas star formation in a region offset from the center still continues or has begun recently. This work is the first study of a possible E+A progenitor using spatially resolved spectroscopy.
△ Less
Submitted 25 January, 2011;
originally announced January 2011.
-
Galactic Wind in the Nearby Starburst Galaxy NGC 253 Observed with the Kyoto3DII Fabry-Perot Mode
Authors:
K. Matsubayashi,
H. Sugai,
T. Hattori,
A. Kawai,
S. Ozaki,
G. Kosugi,
T. Ishigaki,
A. Shimono
Abstract:
We have observed the central region of the nearby starburst galaxy NGC 253 with the Kyoto Tridimensional Spectrograph II (Kyoto3DII) Fabry-Perot mode in order to investigate the properties of its galactic wind. Since this galaxy has a large inclination, it is easy to observe its galactic wind. We produced the Ha, [N II]6583, and [S II]6716,6731 images, as well as those line ratio maps. The [N II…
▽ More
We have observed the central region of the nearby starburst galaxy NGC 253 with the Kyoto Tridimensional Spectrograph II (Kyoto3DII) Fabry-Perot mode in order to investigate the properties of its galactic wind. Since this galaxy has a large inclination, it is easy to observe its galactic wind. We produced the Ha, [N II]6583, and [S II]6716,6731 images, as well as those line ratio maps. The [N II]/Ha ratio in the galactic wind region is larger than those in H II regions in the galactic disk. The [N II]/Ha ratio in the southeastern filament, a part of the galactic wind, is the largest and reaches about 1.5. These large [N II]/Ha ratios are explained by shock ionization/excitation. Using the [S II]/Ha ratio map, we spatially separate the galactic wind region from the starburst region. The kinetic energy of the galactic wind can be sufficiently supplied by supernovae in a starburst region in the galactic center. The shape of the galactic wind and the line ratio maps are non-axisymmetric about the galactic minor axis, which is also seen in M82. In the [N II]6583/[S II]6716,6731 map, the positions with large ratios coincide with the positions of star clusters found in the Hubble Space Telescope (HST) observation. This means that intense star formation causes strong nitrogen enrichment in these regions. Our unique data of the line ratio maps including [S II] lines have demonstrated their effectiveness for clearly distinguishing between shocked gas regions and starburst regions, determining the extent of galactic wind and its mass and kinetic energy, and discovering regions with enhanced nitrogen abundance.
△ Less
Submitted 12 July, 2009;
originally announced July 2009.
-
Integrated field spectroscopy of E+A (post-starburst) galaxies with the Kyoto3DII
Authors:
Tomotsugu Goto,
Atsushi Kawai,
Atsushi Shimono,
Hajime Sugai,
Masafumi Yagi,
Takashi Hattori
Abstract:
We have performed a two-dimensional spectroscopy of three nearby E+A (post-starburst) galaxies with the Kyoto3DII integral field spectrograph. In all the cases, Hdelta absorption is stronger at the centre of the galaxies, but significantly extended in a few kpc scale. For one galaxy (J1656), we found a close companion galaxy at the same redshift. The galaxy turned out to be a star-forming galaxy…
▽ More
We have performed a two-dimensional spectroscopy of three nearby E+A (post-starburst) galaxies with the Kyoto3DII integral field spectrograph. In all the cases, Hdelta absorption is stronger at the centre of the galaxies, but significantly extended in a few kpc scale. For one galaxy (J1656), we found a close companion galaxy at the same redshift. The galaxy turned out to be a star-forming galaxy with a strong emission in Hgamma. For the other two galaxies, we have found that the central post-starburst regions possibly extend toward the direction of the tidal tails. Our results are consistent with the merger/interaction origin of E+A galaxies, where the infalling-gas possibly caused by a galaxy-galaxy merging creates a central-starburst, succeeded by a post-starburst (E+A) phase once the gas is depleted.
△ Less
Submitted 7 January, 2008;
originally announced January 2008.
-
Integral Field Spectroscopy of the Quadruply Lensed Quasar 1RXS J1131-1231: New Light on Lens Substructures
Authors:
H. Sugai,
A. Kawai,
A. Shimono,
T. Hattori,
G. Kosugi,
N. Kashikawa,
K. T. Inoue,
M. Chiba
Abstract:
We have observed the quadruply lensed quasar 1RXS J1131-1231 with the integral field spectrograph mode of the Kyoto Tridimensional Spectrograph II mounted on the Subaru telescope. Its field of view has covered simultaneously the three brighter lensed images A, B, and C, which are known to exhibit anomalous flux ratios in their continuum emission. We have found that the [OIII] line flux ratios am…
▽ More
We have observed the quadruply lensed quasar 1RXS J1131-1231 with the integral field spectrograph mode of the Kyoto Tridimensional Spectrograph II mounted on the Subaru telescope. Its field of view has covered simultaneously the three brighter lensed images A, B, and C, which are known to exhibit anomalous flux ratios in their continuum emission. We have found that the [OIII] line flux ratios among these lensed images are consistent with those predicted by smooth-lens models. The absence of both microlensing and millilensing effects on this [OIII] narrow line region sets important limits on the mass of any substructures along the line of sight, which is expressed as M_E < 10^5 M_solar for the mass inside an Einstein radius. In contrast, the H_beta line emission, which originates from the broad line region, shows an anomaly in the flux ratio between images B and C, i.e., a factor two smaller C/B ratio than predicted by smooth-lens models. The ratio of A/B in the H_beta line is well reproduced. We show that the anomalous C/B ratio for the H_beta line is caused most likely by micro/milli-lensing of image C. This is because other effects, such as the differential dust extinction and/or arrival time difference between images B and C, or the simultaneous lensing of another pair of images A and B, are all unlikely. In addition, we have found that the broad H_beta line of image A shows a slight asymmetry in its profile compared with those in the other images, which suggests the presence of a small microlensing effect on this line emitting region of image A.
△ Less
Submitted 14 February, 2007;
originally announced February 2007.
