-
Using graph neural networks to reconstruct charged pion showers in the CMS High Granularity Calorimeter
Authors:
M. Aamir,
B. Acar,
G. Adamov,
T. Adams,
C. Adloff,
S. Afanasiev,
C. Agrawal,
C. Agrawal,
A. Ahmad,
H. A. Ahmed,
S. Akbar,
N. Akchurin,
B. Akgul,
B. Akgun,
R. O. Akpinar,
E. Aktas,
A. AlKadhim,
V. Alexakhin,
J. Alimena,
J. Alison,
A. Alpana,
W. Alshehri,
P. Alvarez Dominguez,
M. Alyari,
C. Amendola
, et al. (550 additional authors not shown)
Abstract:
A novel method to reconstruct the energy of hadronic showers in the CMS High Granularity Calorimeter (HGCAL) is presented. The HGCAL is a sampling calorimeter with very fine transverse and longitudinal granularity. The active media are silicon sensors and scintillator tiles readout by SiPMs and the absorbers are a combination of lead and Cu/CuW in the electromagnetic section, and steel in the hadr…
▽ More
A novel method to reconstruct the energy of hadronic showers in the CMS High Granularity Calorimeter (HGCAL) is presented. The HGCAL is a sampling calorimeter with very fine transverse and longitudinal granularity. The active media are silicon sensors and scintillator tiles readout by SiPMs and the absorbers are a combination of lead and Cu/CuW in the electromagnetic section, and steel in the hadronic section. The shower reconstruction method is based on graph neural networks and it makes use of a dynamic reduction network architecture. It is shown that the algorithm is able to capture and mitigate the main effects that normally hinder the reconstruction of hadronic showers using classical reconstruction methods, by compensating for fluctuations in the multiplicity, energy, and spatial distributions of the shower's constituents. The performance of the algorithm is evaluated using test beam data collected in 2018 prototype of the CMS HGCAL accompanied by a section of the CALICE AHCAL prototype. The capability of the method to mitigate the impact of energy leakage from the calorimeter is also demonstrated.
△ Less
Submitted 30 June, 2024; v1 submitted 17 June, 2024;
originally announced June 2024.
-
Sensitivity Analysis in the Presence of Intrinsic Stochasticity for Discrete Fracture Network Simulations
Authors:
Alexander C. Murph,
Justin D. Strait,
Kelly R. Moran,
Jeffrey D. Hyman,
Hari S. Viswanathan,
Philip H. Stauffer
Abstract:
Large-scale discrete fracture network (DFN) simulators are standard fare for studies involving the sub-surface transport of particles since direct observation of real world underground fracture networks is generally infeasible. While these simulators have seen numerous successes over several engineering applications, estimations on quantities of interest (QoI) - such as breakthrough time of partic…
▽ More
Large-scale discrete fracture network (DFN) simulators are standard fare for studies involving the sub-surface transport of particles since direct observation of real world underground fracture networks is generally infeasible. While these simulators have seen numerous successes over several engineering applications, estimations on quantities of interest (QoI) - such as breakthrough time of particles reaching the edge of the system - suffer from a two distinct types of uncertainty. A run of a DFN simulator requires several parameter values to be set that dictate the placement and size of fractures, the density of fractures, and the overall permeability of the system; uncertainty on the proper parameter choices will lead to some amount of uncertainty in the QoI, called epistemic uncertainty. Furthermore, since DFN simulators rely on stochastic processes to place fractures and govern flow, understanding how this randomness affects the QoI requires several runs of the simulator at distinct random seeds. The uncertainty in the QoI attributed to different realizations (i.e. different seeds) of the same random process leads to a second type of uncertainty, called aleatoric uncertainty. In this paper, we perform a Sensitivity Analysis, which directly attributes the uncertainty observed in the QoI to the epistemic uncertainty from each input parameter and to the aleatoric uncertainty. We make several design choices to handle an observed heteroskedasticity in DFN simulators, where the aleatoric uncertainty changes for different inputs, since the quality makes several standard statistical methods inadmissible. Beyond the specific takeaways on which input variables affect uncertainty the most for DFN simulators, a major contribution of this paper is the introduction of a statistically rigorous workflow for characterizing the uncertainty in DFN flow simulations that exhibit heteroskedasticity.
△ Less
Submitted 4 January, 2024; v1 submitted 7 December, 2023;
originally announced December 2023.
-
Bayesian Learning of Gas Transport in Three-Dimensional Fracture Networks
Authors:
Yingqi Shi,
Donald J. Berry,
John Kath,
Shams Lodhy,
An Ly,
Allon G. Percus,
Jeffrey D. Hyman,
Kelly Moran,
Justin Strait,
Matthew R. Sweeney,
Hari S. Viswanathan,
Philip H. Stauffer
Abstract:
Modeling gas flow through fractures of subsurface rock is a particularly challenging problem because of the heterogeneous nature of the material. High-fidelity simulations using discrete fracture network (DFN) models are one methodology for predicting gas particle breakthrough times at the surface, but are computationally demanding. We propose a Bayesian machine learning method that serves as an e…
▽ More
Modeling gas flow through fractures of subsurface rock is a particularly challenging problem because of the heterogeneous nature of the material. High-fidelity simulations using discrete fracture network (DFN) models are one methodology for predicting gas particle breakthrough times at the surface, but are computationally demanding. We propose a Bayesian machine learning method that serves as an efficient surrogate model, or emulator, for these three-dimensional DFN simulations. Our model trains on a small quantity of simulation data and, using a graph/path-based decomposition of the fracture network, rapidly predicts quantiles of the breakthrough time distribution. The approach, based on Gaussian Process Regression (GPR), outputs predictions that are within 20-30% of high-fidelity DFN simulation results. Unlike previously proposed methods, it also provides uncertainty quantification, outputting confidence intervals that are essential given the uncertainty inherent in subsurface modeling. Our trained model runs within a fraction of a second, which is considerably faster than other methods with comparable accuracy and multiple orders of magnitude faster than high-fidelity simulations.
△ Less
Submitted 6 June, 2023;
originally announced June 2023.
-
Performance of the CMS High Granularity Calorimeter prototype to charged pion beams of 20$-$300 GeV/c
Authors:
B. Acar,
G. Adamov,
C. Adloff,
S. Afanasiev,
N. Akchurin,
B. Akgün,
M. Alhusseini,
J. Alison,
J. P. Figueiredo de sa Sousa de Almeida,
P. G. Dias de Almeida,
A. Alpana,
M. Alyari,
I. Andreev,
U. Aras,
P. Aspell,
I. O. Atakisi,
O. Bach,
A. Baden,
G. Bakas,
A. Bakshi,
S. Banerjee,
P. DeBarbaro,
P. Bargassa,
D. Barney,
F. Beaudette
, et al. (435 additional authors not shown)
Abstract:
The upgrade of the CMS experiment for the high luminosity operation of the LHC comprises the replacement of the current endcap calorimeter by a high granularity sampling calorimeter (HGCAL). The electromagnetic section of the HGCAL is based on silicon sensors interspersed between lead and copper (or copper tungsten) absorbers. The hadronic section uses layers of stainless steel as an absorbing med…
▽ More
The upgrade of the CMS experiment for the high luminosity operation of the LHC comprises the replacement of the current endcap calorimeter by a high granularity sampling calorimeter (HGCAL). The electromagnetic section of the HGCAL is based on silicon sensors interspersed between lead and copper (or copper tungsten) absorbers. The hadronic section uses layers of stainless steel as an absorbing medium and silicon sensors as an active medium in the regions of high radiation exposure, and scintillator tiles directly readout by silicon photomultipliers in the remaining regions. As part of the development of the detector and its readout electronic components, a section of a silicon-based HGCAL prototype detector along with a section of the CALICE AHCAL prototype was exposed to muons, electrons and charged pions in beam test experiments at the H2 beamline at the CERN SPS in October 2018. The AHCAL uses the same technology as foreseen for the HGCAL but with much finer longitudinal segmentation. The performance of the calorimeters in terms of energy response and resolution, longitudinal and transverse shower profiles is studied using negatively charged pions, and is compared to GEANT4 predictions. This is the first report summarizing results of hadronic showers measured by the HGCAL prototype using beam test data.
△ Less
Submitted 27 May, 2023; v1 submitted 9 November, 2022;
originally announced November 2022.
-
Report of the Snowmass 2021 Collider Implementation Task Force
Authors:
Thomas Roser,
Reinhard Brinkmann,
Sarah Cousineau,
Dmitri Denisov,
Spencer Gessner,
Steve Gourlay,
Philippe Lebrun,
Meenakshi Narain,
Katsunobu Oide,
Tor Raubenheimer,
John Seeman,
Vladimir Shiltsev,
Jim Strait,
Marlene Turner,
Lian-Tao Wang
Abstract:
The Snowmass 2021 Implementation Task Force has been established to evaluate the proposed future accelerator projects for performance, technology readiness, schedule, cost, and environmental impact. Corresponding metrics has been developed for uniform comparison of the proposals ranging from Higgs/EW factories to multi-TeV lepton, hadron and ep collider facilities, based on traditional and advance…
▽ More
The Snowmass 2021 Implementation Task Force has been established to evaluate the proposed future accelerator projects for performance, technology readiness, schedule, cost, and environmental impact. Corresponding metrics has been developed for uniform comparison of the proposals ranging from Higgs/EW factories to multi-TeV lepton, hadron and ep collider facilities, based on traditional and advanced acceleration technologies. This report documents the metrics and processes, and presents evaluations of future colliders performed by Implementation Task Force.
△ Less
Submitted 27 March, 2023; v1 submitted 11 August, 2022;
originally announced August 2022.
-
Nonparametric Multi-shape Modeling with Uncertainty Quantification
Authors:
Hengrui Luo,
Justin D. Strait
Abstract:
The modeling and uncertainty quantification of closed curves is an important problem in the field of shape analysis, and can have significant ramifications for subsequent statistical tasks. Many of these tasks involve collections of closed curves, which often exhibit structural similarities at multiple levels. Modeling multiple closed curves in a way that efficiently incorporates such between-curv…
▽ More
The modeling and uncertainty quantification of closed curves is an important problem in the field of shape analysis, and can have significant ramifications for subsequent statistical tasks. Many of these tasks involve collections of closed curves, which often exhibit structural similarities at multiple levels. Modeling multiple closed curves in a way that efficiently incorporates such between-curve dependence remains a challenging problem. In this work, we propose and investigate a multiple-output (a.k.a. multi-output), multi-dimensional Gaussian process modeling framework. We illustrate the proposed methodological advances, and demonstrate the utility of meaningful uncertainty quantification, on several curve and shape-related tasks. This model-based approach not only addresses the problem of inference on closed curves (and their shapes) with kernel constructions, but also opens doors to nonparametric modeling of multi-level dependence for functional objects in general.
△ Less
Submitted 13 March, 2023; v1 submitted 18 June, 2022;
originally announced June 2022.
-
Low-Energy Physics in Neutrino LArTPCs
Authors:
D. Caratelli,
W. Foreman,
A. Friedland,
S. Gardiner,
I. Gil-Botella,
G. Karagiorgi,
M. Kirby,
G. Lehmann Miotto,
B. R. Littlejohn,
M. Mooney,
J. Reichenbacher,
A. Sousa,
K. Scholberg,
J. Yu,
T. Yang,
S. Andringa,
J. Asaadi,
T. J. C. Bezerra,
F. Capozzi,
F. Cavanna,
E. Church,
A. Himmel,
T. Junk,
J. Klein,
I. Lepetic
, et al. (264 additional authors not shown)
Abstract:
In this white paper, we outline some of the scientific opportunities and challenges related to detection and reconstruction of low-energy (less than 100 MeV) signatures in liquid argon time-projection chamber (LArTPC) detectors. Key takeaways are summarized as follows. 1) LArTPCs have unique sensitivity to a range of physics and astrophysics signatures via detection of event features at and below…
▽ More
In this white paper, we outline some of the scientific opportunities and challenges related to detection and reconstruction of low-energy (less than 100 MeV) signatures in liquid argon time-projection chamber (LArTPC) detectors. Key takeaways are summarized as follows. 1) LArTPCs have unique sensitivity to a range of physics and astrophysics signatures via detection of event features at and below the few tens of MeV range. 2) Low-energy signatures are an integral part of GeV-scale accelerator neutrino interaction final states, and their reconstruction can enhance the oscillation physics sensitivities of LArTPC experiments. 3) BSM signals from accelerator and natural sources also generate diverse signatures in the low-energy range, and reconstruction of these signatures can increase the breadth of BSM scenarios accessible in LArTPC-based searches. 4) Neutrino interaction cross sections and other nuclear physics processes in argon relevant to sub-hundred-MeV LArTPC signatures are poorly understood. Improved theory and experimental measurements are needed. Pion decay-at-rest sources and charged particle and neutron test beams are ideal facilities for experimentally improving this understanding. 5) There are specific calibration needs in the low-energy range, as well as specific needs for control and understanding of radiological and cosmogenic backgrounds. 6) Novel ideas for future LArTPC technology that enhance low-energy capabilities should be explored. These include novel charge enhancement and readout systems, enhanced photon detection, low radioactivity argon, and xenon doping. 7) Low-energy signatures, whether steady-state or part of a supernova burst or larger GeV-scale event topology, have specific triggering, DAQ and reconstruction requirements that must be addressed outside the scope of conventional GeV-scale data collection and analysis pathways.
△ Less
Submitted 1 March, 2022;
originally announced March 2022.
-
Response of a CMS HGCAL silicon-pad electromagnetic calorimeter prototype to 20-300 GeV positrons
Authors:
B. Acar,
G. Adamov,
C. Adloff,
S. Afanasiev,
N. Akchurin,
B. Akgün,
F. Alam Khan,
M. Alhusseini,
J. Alison,
A. Alpana,
G. Altopp,
M. Alyari,
S. An,
S. Anagul,
I. Andreev,
P. Aspell,
I. O. Atakisi,
O. Bach,
A. Baden,
G. Bakas,
A. Bakshi,
S. Bannerjee,
P. Bargassa,
D. Barney,
F. Beaudette
, et al. (364 additional authors not shown)
Abstract:
The Compact Muon Solenoid Collaboration is designing a new high-granularity endcap calorimeter, HGCAL, to be installed later this decade. As part of this development work, a prototype system was built, with an electromagnetic section consisting of 14 double-sided structures, providing 28 sampling layers. Each sampling layer has an hexagonal module, where a multipad large-area silicon sensor is glu…
▽ More
The Compact Muon Solenoid Collaboration is designing a new high-granularity endcap calorimeter, HGCAL, to be installed later this decade. As part of this development work, a prototype system was built, with an electromagnetic section consisting of 14 double-sided structures, providing 28 sampling layers. Each sampling layer has an hexagonal module, where a multipad large-area silicon sensor is glued between an electronics circuit board and a metal baseplate. The sensor pads of approximately 1 cm$^2$ are wire-bonded to the circuit board and are readout by custom integrated circuits. The prototype was extensively tested with beams at CERN's Super Proton Synchrotron in 2018. Based on the data collected with beams of positrons, with energies ranging from 20 to 300 GeV, measurements of the energy resolution and linearity, the position and angular resolutions, and the shower shapes are presented and compared to a detailed Geant4 simulation.
△ Less
Submitted 31 March, 2022; v1 submitted 12 November, 2021;
originally announced November 2021.
-
Construction and commissioning of CMS CE prototype silicon modules
Authors:
B. Acar,
G. Adamov,
C. Adloff,
S. Afanasiev,
N. Akchurin,
B. Akgün,
M. Alhusseini,
J. Alison,
G. Altopp,
M. Alyari,
S. An,
S. Anagul,
I. Andreev,
M. Andrews,
P. Aspell,
I. A. Atakisi,
O. Bach,
A. Baden,
G. Bakas,
A. Bakshi,
P. Bargassa,
D. Barney,
E. Becheva,
P. Behera,
A. Belloni
, et al. (307 additional authors not shown)
Abstract:
As part of its HL-LHC upgrade program, the CMS Collaboration is developing a High Granularity Calorimeter (CE) to replace the existing endcap calorimeters. The CE is a sampling calorimeter with unprecedented transverse and longitudinal readout for both electromagnetic (CE-E) and hadronic (CE-H) compartments. The calorimeter will be built with $\sim$30,000 hexagonal silicon modules. Prototype modul…
▽ More
As part of its HL-LHC upgrade program, the CMS Collaboration is developing a High Granularity Calorimeter (CE) to replace the existing endcap calorimeters. The CE is a sampling calorimeter with unprecedented transverse and longitudinal readout for both electromagnetic (CE-E) and hadronic (CE-H) compartments. The calorimeter will be built with $\sim$30,000 hexagonal silicon modules. Prototype modules have been constructed with 6-inch hexagonal silicon sensors with cell areas of 1.1~$cm^2$, and the SKIROC2-CMS readout ASIC. Beam tests of different sampling configurations were conducted with the prototype modules at DESY and CERN in 2017 and 2018. This paper describes the construction and commissioning of the CE calorimeter prototype, the silicon modules used in the construction, their basic performance, and the methods used for their calibration.
△ Less
Submitted 10 December, 2020;
originally announced December 2020.
-
The DAQ system of the 12,000 Channel CMS High Granularity Calorimeter Prototype
Authors:
B. Acar,
G. Adamov,
C. Adloff,
S. Afanasiev,
N. Akchurin,
B. Akgün,
M. Alhusseini,
J. Alison,
G. Altopp,
M. Alyari,
S. An,
S. Anagul,
I. Andreev,
M. Andrews,
P. Aspell,
I. A. Atakisi,
O. Bach,
A. Baden,
G. Bakas,
A. Bakshi,
P. Bargassa,
D. Barney,
E. Becheva,
P. Behera,
A. Belloni
, et al. (307 additional authors not shown)
Abstract:
The CMS experiment at the CERN LHC will be upgraded to accommodate the 5-fold increase in the instantaneous luminosity expected at the High-Luminosity LHC (HL-LHC). Concomitant with this increase will be an increase in the number of interactions in each bunch crossing and a significant increase in the total ionising dose and fluence. One part of this upgrade is the replacement of the current endca…
▽ More
The CMS experiment at the CERN LHC will be upgraded to accommodate the 5-fold increase in the instantaneous luminosity expected at the High-Luminosity LHC (HL-LHC). Concomitant with this increase will be an increase in the number of interactions in each bunch crossing and a significant increase in the total ionising dose and fluence. One part of this upgrade is the replacement of the current endcap calorimeters with a high granularity sampling calorimeter equipped with silicon sensors, designed to manage the high collision rates. As part of the development of this calorimeter, a series of beam tests have been conducted with different sampling configurations using prototype segmented silicon detectors. In the most recent of these tests, conducted in late 2018 at the CERN SPS, the performance of a prototype calorimeter equipped with ${\approx}12,000\rm{~channels}$ of silicon sensors was studied with beams of high-energy electrons, pions and muons. This paper describes the custom-built scalable data acquisition system that was built with readily available FPGA mezzanines and low-cost Raspberry PI computers.
△ Less
Submitted 8 December, 2020; v1 submitted 7 December, 2020;
originally announced December 2020.
-
Combining Geometric and Topological Information for Boundary Estimation
Authors:
Hengrui Luo,
Justin Strait
Abstract:
A fundamental problem in computer vision is boundary estimation, where the goal is to delineate the boundary of objects in an image. In this paper, we propose a method which jointly incorporates geometric and topological information within an image to simultaneously estimate boundaries for objects within images with more complex topologies. We use a topological clustering-based method to assist in…
▽ More
A fundamental problem in computer vision is boundary estimation, where the goal is to delineate the boundary of objects in an image. In this paper, we propose a method which jointly incorporates geometric and topological information within an image to simultaneously estimate boundaries for objects within images with more complex topologies. We use a topological clustering-based method to assist initialization of the Bayesian active contour model. This combines pixel clustering, boundary smoothness, and potential prior shape information to produce an estimated object boundary. Active contour methods are knownto be extremely sensitive to algorithm initialization, relying on the user to provide a reasonable starting curve to the algorithm. In the presence of images featuring objects with complex topological structures, such as objects with holes or multiple objects, the user must initialize separate curves for each boundary of interest. Our proposed topologically-guided method can provide an interpretable, smart initialization in these settings, freeing up the user from potential pitfalls associated with objects of complex topological structure. We provide a detailed simulation study comparing our initialization to boundary estimates obtained from standard segmentation algorithms. The method is demonstrated on artificial image datasets from computer vision, as well as real-world applications to skin lesion and neural cellular images, for which multiple topological features can be identified.
△ Less
Submitted 2 January, 2021; v1 submitted 10 October, 2019;
originally announced October 2019.
-
Revisiting the Photon-Drag Effect in Metal Films
Authors:
Jared H. Strait,
Glenn Holland,
Wenqi Zhu,
Cheng Zhang,
Bojan R. Ilic,
Amit Agrawal,
Domenico Pacifici,
Henri J. Lezec
Abstract:
The photon-drag effect, the rectified current in a medium induced by conservation of momentum of absorbed or redirected light, is a unique probe of the detailed mechanisms underlying radiation pressure. We revisit this effect in gold, a canonical Drude metal. We discover that the signal for p-polarized illumination in ambient air is affected in both sign and magnitude by adsorbed molecules, openin…
▽ More
The photon-drag effect, the rectified current in a medium induced by conservation of momentum of absorbed or redirected light, is a unique probe of the detailed mechanisms underlying radiation pressure. We revisit this effect in gold, a canonical Drude metal. We discover that the signal for p-polarized illumination in ambient air is affected in both sign and magnitude by adsorbed molecules, opening previous measurements for reinterpretation. Further, we show that the intrinsic sign of the photon-drag effect is contrary to the prevailing intuitive model of direct momentum transfer to free electrons.
△ Less
Submitted 5 March, 2019; v1 submitted 4 December, 2018;
originally announced December 2018.
-
The DUNE Far Detector Interim Design Report, Volume 3: Dual-Phase Module
Authors:
DUNE Collaboration,
B. Abi,
R. Acciarri,
M. A. Acero,
M. Adamowski,
C. Adams,
D. Adams,
P. Adamson,
M. Adinolfi,
Z. Ahmad,
C. H. Albright,
L. Aliaga Soplin,
T. Alion,
S. Alonso Monsalve,
M. Alrashed,
C. Alt,
J. Anderson,
K. Anderson,
C. Andreopoulos,
M. P. Andrews,
R. A. Andrews,
A. Ankowski,
J. Anthony,
M. Antonello,
M. Antonova
, et al. (1076 additional authors not shown)
Abstract:
The DUNE IDR describes the proposed physics program and technical designs of the DUNE far detector modules in preparation for the full TDR to be published in 2019. It is intended as an intermediate milestone on the path to a full TDR, justifying the technical choices that flow down from the high-level physics goals through requirements at all levels of the Project. These design choices will enable…
▽ More
The DUNE IDR describes the proposed physics program and technical designs of the DUNE far detector modules in preparation for the full TDR to be published in 2019. It is intended as an intermediate milestone on the path to a full TDR, justifying the technical choices that flow down from the high-level physics goals through requirements at all levels of the Project. These design choices will enable the DUNE experiment to make the ground-breaking discoveries that will help to answer fundamental physics questions. Volume 3 describes the dual-phase module's subsystems, the technical coordination required for its design, construction, installation, and integration, and its organizational structure.
△ Less
Submitted 26 July, 2018;
originally announced July 2018.
-
The DUNE Far Detector Interim Design Report Volume 1: Physics, Technology and Strategies
Authors:
DUNE Collaboration,
B. Abi,
R. Acciarri,
M. A. Acero,
M. Adamowski,
C. Adams,
D. Adams,
P. Adamson,
M. Adinolfi,
Z. Ahmad,
C. H. Albright,
L. Aliaga Soplin,
T. Alion,
S. Alonso Monsalve,
M. Alrashed,
C. Alt,
J. Anderson,
K. Anderson,
C. Andreopoulos,
M. P. Andrews,
R. A. Andrews,
A. Ankowski,
J. Anthony,
M. Antonello,
M. Antonova
, et al. (1076 additional authors not shown)
Abstract:
The DUNE IDR describes the proposed physics program and technical designs of the DUNE Far Detector modules in preparation for the full TDR to be published in 2019. It is intended as an intermediate milestone on the path to a full TDR, justifying the technical choices that flow down from the high-level physics goals through requirements at all levels of the Project. These design choices will enable…
▽ More
The DUNE IDR describes the proposed physics program and technical designs of the DUNE Far Detector modules in preparation for the full TDR to be published in 2019. It is intended as an intermediate milestone on the path to a full TDR, justifying the technical choices that flow down from the high-level physics goals through requirements at all levels of the Project. These design choices will enable the DUNE experiment to make the ground-breaking discoveries that will help to answer fundamental physics questions. Volume 1 contains an executive summary that describes the general aims of this document. The remainder of this first volume provides a more detailed description of the DUNE physics program that drives the choice of detector technologies. It also includes concise outlines of two overarching systems that have not yet evolved to consortium structures: computing and calibration. Volumes 2 and 3 of this IDR describe, for the single-phase and dual-phase technologies, respectively, each detector module's subsystems, the technical coordination required for its design, construction, installation, and integration, and its organizational structure.
△ Less
Submitted 26 July, 2018;
originally announced July 2018.
-
The DUNE Far Detector Interim Design Report, Volume 2: Single-Phase Module
Authors:
DUNE Collaboration,
B. Abi,
R. Acciarri,
M. A. Acero,
M. Adamowski,
C. Adams,
D. Adams,
P. Adamson,
M. Adinolfi,
Z. Ahmad,
C. H. Albright,
L. Aliaga Soplin,
T. Alion,
S. Alonso Monsalve,
M. Alrashed,
C. Alt,
J. Anderson,
K. Anderson,
C. Andreopoulos,
M. P. Andrews,
R. A. Andrews,
A. Ankowski,
J. Anthony,
M. Antonello,
M. Antonova
, et al. (1076 additional authors not shown)
Abstract:
The DUNE IDR describes the proposed physics program and technical designs of the DUNE far detector modules in preparation for the full TDR to be published in 2019. It is intended as an intermediate milestone on the path to a full TDR, justifying the technical choices that flow down from the high-level physics goals through requirements at all levels of the Project. These design choices will enable…
▽ More
The DUNE IDR describes the proposed physics program and technical designs of the DUNE far detector modules in preparation for the full TDR to be published in 2019. It is intended as an intermediate milestone on the path to a full TDR, justifying the technical choices that flow down from the high-level physics goals through requirements at all levels of the Project. These design choices will enable the DUNE experiment to make the ground-breaking discoveries that will help to answer fundamental physics questions. Volume 2 describes the single-phase module's subsystems, the technical coordination required for its design, construction, installation, and integration, and its organizational structure.
△ Less
Submitted 26 July, 2018;
originally announced July 2018.
-
Feedforward and feedback control of locked mode phase and rotation in DIII-D with application to modulated ECCD experiments
Authors:
Wilkie Choi,
R. J. La Haye,
M. J. Lanctot,
K. E. J. Olofsson,
E. J. Strait,
R. Sweeney,
F. A. Volpe
Abstract:
The toroidal phase and rotation of otherwise locked magnetic islands of toroidal mode number n=1 are controlled in the DIII-D tokamak by means of applied magnetic perturbations of n=1. Pre-emptive perturbations were applied in feedforward to "catch" the mode as it slowed down and entrain it to the rotating field before complete locking, thus avoiding the associated major confinement degradation. A…
▽ More
The toroidal phase and rotation of otherwise locked magnetic islands of toroidal mode number n=1 are controlled in the DIII-D tokamak by means of applied magnetic perturbations of n=1. Pre-emptive perturbations were applied in feedforward to "catch" the mode as it slowed down and entrain it to the rotating field before complete locking, thus avoiding the associated major confinement degradation. Additionally, for the first time, the phase of the perturbation was optimized in real-time, in feedback with magnetic measurements, in order for the mode's phase to closely match a prescribed phase, as a function of time. Experimental results confirm the capability to hold the mode in a given fixed-phase or to rotate it at up to 20 Hz with good uniformity. The control coil currents utilized in the experiments agree with the requirements estimated by an electromechanical model. Moreover, controlled rotation at 20 Hz was combined with Electron Cyclotron Current Drive (ECCD) modulated at the same frequency. This is simpler than regulating the ECCD modulation in feedback with spontaneous mode rotation, and enables repetitive, reproducible ECCD deposition at or near the island O-point, X-point and locations in between, for careful studies of how this affects the island stability. Current drive was found to be radially misaligned relative to the island, and resulting growth and shrinkage of islands matched expectations of the Modified Rutherford Equation for some discharges presented here. Finally, simulations predict the as designed ITER 3D coils can entrain a small island at sub-10 Hz frequencies.
△ Less
Submitted 15 January, 2018;
originally announced January 2018.
-
Automatic Detection and Uncertainty Quantification of Landmarks on Elastic Curves
Authors:
Justin Strait,
Oksana Chkrebtii,
Sebastian Kurtek
Abstract:
A population quantity of interest in statistical shape analysis is the location of landmarks, which are points that aid in reconstructing and representing shapes of objects. We provide an automated, model-based approach to inferring landmarks given a sample of shape data. The model is formulated based on a linear reconstruction of the shape, passing through the specified points, and a Bayesian inf…
▽ More
A population quantity of interest in statistical shape analysis is the location of landmarks, which are points that aid in reconstructing and representing shapes of objects. We provide an automated, model-based approach to inferring landmarks given a sample of shape data. The model is formulated based on a linear reconstruction of the shape, passing through the specified points, and a Bayesian inferential approach is described for estimating unknown landmark locations. The question of how many landmarks to select is addressed in two different ways: (1) by defining a criterion-based approach, and (2) joint estimation of the number of landmarks along with their locations. Efficient methods for posterior sampling are also discussed. We motivate our approach using several simulated examples, as well as data obtained from applications in computer vision and biology; additionally, we explore placements and associated uncertainty in landmarks for various substructures extracted from magnetic resonance image slices.
△ Less
Submitted 13 October, 2017;
originally announced October 2017.
-
The Single-Phase ProtoDUNE Technical Design Report
Authors:
B. Abi,
R. Acciarri,
M. A. Acero,
M. Adamowski,
C. Adams,
D. L. Adams,
P. Adamson,
M. Adinolfi,
Z. Ahmad,
C. H. Albright,
T. Alion,
J. Anderson,
K. Anderson,
C. Andreopoulos,
M. P. Andrews,
R. A. Andrews,
J. dos Anjos,
A. Ankowski,
J. Anthony,
M. Antonello,
A. Aranda Fernandez,
A. Ariga,
T. Ariga,
E. Arrieta Diaz,
J. Asaadi
, et al. (806 additional authors not shown)
Abstract:
ProtoDUNE-SP is the single-phase DUNE Far Detector prototype that is under construction and will be operated at the CERN Neutrino Platform (NP) starting in 2018. ProtoDUNE-SP, a crucial part of the DUNE effort towards the construction of the first DUNE 10-kt fiducial mass far detector module (17 kt total LAr mass), is a significant experiment in its own right. With a total liquid argon (LAr) mass…
▽ More
ProtoDUNE-SP is the single-phase DUNE Far Detector prototype that is under construction and will be operated at the CERN Neutrino Platform (NP) starting in 2018. ProtoDUNE-SP, a crucial part of the DUNE effort towards the construction of the first DUNE 10-kt fiducial mass far detector module (17 kt total LAr mass), is a significant experiment in its own right. With a total liquid argon (LAr) mass of 0.77 kt, it represents the largest monolithic single-phase LArTPC detector to be built to date. It's technical design is given in this report.
△ Less
Submitted 27 July, 2017; v1 submitted 21 June, 2017;
originally announced June 2017.
-
Long-Baseline Neutrino Facility (LBNF) and Deep Underground Neutrino Experiment (DUNE) Conceptual Design Report Volume 3: Long-Baseline Neutrino Facility for DUNE June 24, 2015
Authors:
James Strait,
Elaine McCluskey,
Tracy Lundin,
Joshua Willhite,
Thomas Hamernik,
Vaia Papadimitriou,
Alberto Marchionni,
Min Jeong Kim,
Marzio Nessi,
David Montanari,
Anne Heavey
Abstract:
This volume of the LBNF/DUNE Conceptual Design Report cover the Long-Baseline Neutrino Facility for DUNE and describes the LBNF Project, which includes design and construction of the beamline at Fermilab, the conventional facilities at both Fermilab and SURF, and the cryostat and cryogenics infrastructure required for the DUNE far detector.
This volume of the LBNF/DUNE Conceptual Design Report cover the Long-Baseline Neutrino Facility for DUNE and describes the LBNF Project, which includes design and construction of the beamline at Fermilab, the conventional facilities at both Fermilab and SURF, and the cryostat and cryogenics infrastructure required for the DUNE far detector.
△ Less
Submitted 21 January, 2016;
originally announced January 2016.
-
Long-Baseline Neutrino Facility (LBNF) and Deep Underground Neutrino Experiment (DUNE) Conceptual Design Report Volume 1: The LBNF and DUNE Projects
Authors:
R. Acciarri,
M. A. Acero,
M. Adamowski,
C. Adams,
P. Adamson,
S. Adhikari,
Z. Ahmad,
C. H. Albright,
T. Alion,
E. Amador,
J. Anderson,
K. Anderson,
C. Andreopoulos,
M. Andrews,
R. Andrews,
I. Anghel,
J. d. Anjos,
A. Ankowski,
M. Antonello,
A. ArandaFernandez,
A. Ariga,
T. Ariga,
D. Aristizabal,
E. Arrieta-Diaz,
K. Aryal
, et al. (780 additional authors not shown)
Abstract:
This document presents the Conceptual Design Report (CDR) put forward by an international neutrino community to pursue the Deep Underground Neutrino Experiment at the Long-Baseline Neutrino Facility (LBNF/DUNE), a groundbreaking science experiment for long-baseline neutrino oscillation studies and for neutrino astrophysics and nucleon decay searches. The DUNE far detector will be a very large modu…
▽ More
This document presents the Conceptual Design Report (CDR) put forward by an international neutrino community to pursue the Deep Underground Neutrino Experiment at the Long-Baseline Neutrino Facility (LBNF/DUNE), a groundbreaking science experiment for long-baseline neutrino oscillation studies and for neutrino astrophysics and nucleon decay searches. The DUNE far detector will be a very large modular liquid argon time-projection chamber (LArTPC) located deep underground, coupled to the LBNF multi-megawatt wide-band neutrino beam. DUNE will also have a high-resolution and high-precision near detector.
△ Less
Submitted 20 January, 2016;
originally announced January 2016.
-
Long-Baseline Neutrino Facility (LBNF) and Deep Underground Neutrino Experiment (DUNE) Conceptual Design Report, Volume 4 The DUNE Detectors at LBNF
Authors:
R. Acciarri,
M. A. Acero,
M. Adamowski,
C. Adams,
P. Adamson,
S. Adhikari,
Z. Ahmad,
C. H. Albright,
T. Alion,
E. Amador,
J. Anderson,
K. Anderson,
C. Andreopoulos,
M. Andrews,
R. Andrews,
I. Anghel,
J. d. Anjos,
A. Ankowski,
M. Antonello,
A. ArandaFernandez,
A. Ariga,
T. Ariga,
D. Aristizabal,
E. Arrieta-Diaz,
K. Aryal
, et al. (779 additional authors not shown)
Abstract:
A description of the proposed detector(s) for DUNE at LBNF
A description of the proposed detector(s) for DUNE at LBNF
△ Less
Submitted 12 January, 2016;
originally announced January 2016.
-
Long-Baseline Neutrino Facility (LBNF) and Deep Underground Neutrino Experiment (DUNE) Conceptual Design Report Volume 2: The Physics Program for DUNE at LBNF
Authors:
DUNE Collaboration,
R. Acciarri,
M. A. Acero,
M. Adamowski,
C. Adams,
P. Adamson,
S. Adhikari,
Z. Ahmad,
C. H. Albright,
T. Alion,
E. Amador,
J. Anderson,
K. Anderson,
C. Andreopoulos,
M. Andrews,
R. Andrews,
I. Anghel,
J. d. Anjos,
A. Ankowski,
M. Antonello,
A. ArandaFernandez,
A. Ariga,
T. Ariga,
D. Aristizabal,
E. Arrieta-Diaz
, et al. (780 additional authors not shown)
Abstract:
The Physics Program for the Deep Underground Neutrino Experiment (DUNE) at the Fermilab Long-Baseline Neutrino Facility (LBNF) is described.
The Physics Program for the Deep Underground Neutrino Experiment (DUNE) at the Fermilab Long-Baseline Neutrino Facility (LBNF) is described.
△ Less
Submitted 22 January, 2016; v1 submitted 18 December, 2015;
originally announced December 2015.
-
Avoiding Tokamak disruptions by applying static magnetic fields that align locked modes with stabilizing wave-driven currents
Authors:
F. A. Volpe,
A. Hyatt,
R. J. La Haye,
M. J. Lanctot,
J. Lohr,
R. Prater,
E. J. Strait,
A. Welander
Abstract:
Non-rotating (`locked') magnetic islands often lead to complete losses of confinement in tokamak plasmas, called major disruptions. Here locked islands were suppressed for the first time, by a combination of applied three-dimensional magnetic fields and injected millimetre waves. The applied fields were used to control the phase of locking and so align the island O-point with the region where the…
▽ More
Non-rotating (`locked') magnetic islands often lead to complete losses of confinement in tokamak plasmas, called major disruptions. Here locked islands were suppressed for the first time, by a combination of applied three-dimensional magnetic fields and injected millimetre waves. The applied fields were used to control the phase of locking and so align the island O-point with the region where the injected waves generated non-inductive currents. This resulted in stabilization of the locked island, disruption avoidance, recovery of high confinement and high pressure, in accordance with the expected dependencies upon wave power and relative phase between O-point and driven current.
△ Less
Submitted 29 October, 2015;
originally announced October 2015.
-
The Intermediate Neutrino Program
Authors:
C. Adams,
J. R. Alonso,
A. M. Ankowski,
J. A. Asaadi,
J. Ashenfelter,
S. N. Axani,
K. Babu,
C. Backhouse,
H. R. Band,
P. S. Barbeau,
N. Barros,
A. Bernstein,
M. Betancourt,
M. Bishai,
E. Blucher,
J. Bouffard,
N. Bowden,
S. Brice,
C. Bryan,
L. Camilleri,
J. Cao,
J. Carlson,
R. E. Carr,
A. Chatterjee,
M. Chen
, et al. (164 additional authors not shown)
Abstract:
The US neutrino community gathered at the Workshop on the Intermediate Neutrino Program (WINP) at Brookhaven National Laboratory February 4-6, 2015 to explore opportunities in neutrino physics over the next five to ten years. Scientists from particle, astroparticle and nuclear physics participated in the workshop. The workshop examined promising opportunities for neutrino physics in the intermedia…
▽ More
The US neutrino community gathered at the Workshop on the Intermediate Neutrino Program (WINP) at Brookhaven National Laboratory February 4-6, 2015 to explore opportunities in neutrino physics over the next five to ten years. Scientists from particle, astroparticle and nuclear physics participated in the workshop. The workshop examined promising opportunities for neutrino physics in the intermediate term, including possible new small to mid-scale experiments, US contributions to large experiments, upgrades to existing experiments, R&D plans and theory. The workshop was organized into two sets of parallel working group sessions, divided by physics topics and technology. Physics working groups covered topics on Sterile Neutrinos, Neutrino Mixing, Neutrino Interactions, Neutrino Properties and Astrophysical Neutrinos. Technology sessions were organized into Theory, Short-Baseline Accelerator Neutrinos, Reactor Neutrinos, Detector R&D and Source, Cyclotron and Meson Decay at Rest sessions.This report summarizes discussion and conclusions from the workshop.
△ Less
Submitted 1 April, 2015; v1 submitted 23 March, 2015;
originally announced March 2015.
-
Fast Exciton Annihilation by Capture of Electrons or Holes by Defects via Auger Scattering in Monolayer Metal Dichalcogenides
Authors:
Haining Wang,
Jared H. Strait,
Changjian Zhang,
Weimin Chan,
Christina Manolatou,
Sandip Tiwari,
Farhan Rana
Abstract:
The strong Coulomb interactions and the small exciton radii in two-dimensional metal dichalcogenides can result in very fast capture of electrons and holes of excitons by mid-gap defects from Auger processes. In the Auger processes considered here, an exciton is annihilated at a defect site with the capture of the electron (or the hole) by the defect and the hole (or the electron) is scattered to…
▽ More
The strong Coulomb interactions and the small exciton radii in two-dimensional metal dichalcogenides can result in very fast capture of electrons and holes of excitons by mid-gap defects from Auger processes. In the Auger processes considered here, an exciton is annihilated at a defect site with the capture of the electron (or the hole) by the defect and the hole (or the electron) is scattered to a high energy. In the case of excitons, the probability of finding an electron and a hole near each other is enhanced many folds compared to the case of free uncorrelated electrons and holes. Consequently, the rate of carrier capture by defects from Auger scattering for excitons in metal dichalcogenides can be 100-1000 times larger than for uncorrelated electrons and holes for carrier densities in the $10^{11}$-$10^{12}$ cm$^{-2}$ range. We calculate the capture times of electrons and holes by defects and show that the capture times can be in the sub-picosecond to a few picoseconds range. The capture rates exhibit linear as well as quadratic dependence on the exciton density. These fast time scales agree well with the recent experimental observations, and point to the importance of controlling defects in metal dichalcogenides for optoelectronic applications.
△ Less
Submitted 8 December, 2014; v1 submitted 12 October, 2014;
originally announced October 2014.
-
High Intrinsic Mobility and Ultrafast Carrier Dynamics in Multilayer Metal Dichalcogenide MoS2
Authors:
Jared H. Strait,
Parinita Nene,
Farhan Rana
Abstract:
The ultimate limitations on carrier mobilities in metal dichalcogenides, and the dynamics associated with carrier relaxation, are unclear. We present measurements of the frequency-dependent conductivity of multilayer dichalcogenide MoS2 by optical-pump terahertz-probe spectroscopy. We find mobilities in this material approaching 4200 cm2/Vs at low temperatures. The temperature dependence of scatte…
▽ More
The ultimate limitations on carrier mobilities in metal dichalcogenides, and the dynamics associated with carrier relaxation, are unclear. We present measurements of the frequency-dependent conductivity of multilayer dichalcogenide MoS2 by optical-pump terahertz-probe spectroscopy. We find mobilities in this material approaching 4200 cm2/Vs at low temperatures. The temperature dependence of scattering indicates that the mobility, an order of magnitude larger than previously reported for MoS2, is intrinsically limited by acoustic phonon scattering at THz frequencies. Our measurements of carrier relaxation reveal picosecond cooling times followed by recombination lasting tens of nanoseconds and dominated by Auger scattering into defects. Our results provide a useful context in which to understand and evaluate the performance of MoS2-based electronic and optoelectronic devices.
△ Less
Submitted 11 August, 2014;
originally announced August 2014.
-
Coupling of Plasmon Modes in Graphene Microstructures
Authors:
Parinita Nene,
Jared H. Strait,
Wei-Min Chan,
Christina Manolatou,
Joshua W. Kevek,
Sandip Tiwari,
Paul L. McEuen,
Farhan Rana
Abstract:
A variety of different graphene plasmonic structures and devices have been proposed and demonstrated experimentally. Plasmon modes in graphene microstructures interact strongly via the depolarization fields. An accurate quantitative description of the coupling between plasmon modes is required for designing and understanding complex plasmonic devices. Drawing inspiration from microphotonics, we pr…
▽ More
A variety of different graphene plasmonic structures and devices have been proposed and demonstrated experimentally. Plasmon modes in graphene microstructures interact strongly via the depolarization fields. An accurate quantitative description of the coupling between plasmon modes is required for designing and understanding complex plasmonic devices. Drawing inspiration from microphotonics, we present a coupled-mode theory for graphene plasmonics in which the plasmon eigenmodes of a coupled system are expressed in terms of the plasmon eigenmodes of its uncoupled sub-systems. The coupled-mode theory enables accurate computation of the coupling between the plasmon modes and of the resulting dynamics. We compare theory with experiments performed on the plasmon modes in coupled arrays of graphene strips. In experiments, we tune the coupling by changing the spacing between the graphene strips in the array. Our results show that the coupling parameters obtained from the coupled-mode theory and the plasmon frequency changes resulting from this coupling agree very well with experiments. The work presented here provides a framework for designing and understanding coupled graphene plasmonic structures.
△ Less
Submitted 7 August, 2014;
originally announced August 2014.
-
The Long-Baseline Neutrino Experiment: Exploring Fundamental Symmetries of the Universe
Authors:
LBNE Collaboration,
Corey Adams,
David Adams,
Tarek Akiri,
Tyler Alion,
Kris Anderson,
Costas Andreopoulos,
Mike Andrews,
Ioana Anghel,
João Carlos Costa dos Anjos,
Maddalena Antonello,
Enrique Arrieta-Diaz,
Marina Artuso,
Jonathan Asaadi,
Xinhua Bai,
Bagdat Baibussinov,
Michael Baird,
Baha Balantekin,
Bruce Baller,
Brian Baptista,
D'Ann Barker,
Gary Barker,
William A. Barletta,
Giles Barr,
Larry Bartoszek
, et al. (461 additional authors not shown)
Abstract:
The preponderance of matter over antimatter in the early Universe, the dynamics of the supernova bursts that produced the heavy elements necessary for life and whether protons eventually decay --- these mysteries at the forefront of particle physics and astrophysics are key to understanding the early evolution of our Universe, its current state and its eventual fate. The Long-Baseline Neutrino Exp…
▽ More
The preponderance of matter over antimatter in the early Universe, the dynamics of the supernova bursts that produced the heavy elements necessary for life and whether protons eventually decay --- these mysteries at the forefront of particle physics and astrophysics are key to understanding the early evolution of our Universe, its current state and its eventual fate. The Long-Baseline Neutrino Experiment (LBNE) represents an extensively developed plan for a world-class experiment dedicated to addressing these questions. LBNE is conceived around three central components: (1) a new, high-intensity neutrino source generated from a megawatt-class proton accelerator at Fermi National Accelerator Laboratory, (2) a near neutrino detector just downstream of the source, and (3) a massive liquid argon time-projection chamber deployed as a far detector deep underground at the Sanford Underground Research Facility. This facility, located at the site of the former Homestake Mine in Lead, South Dakota, is approximately 1,300 km from the neutrino source at Fermilab -- a distance (baseline) that delivers optimal sensitivity to neutrino charge-parity symmetry violation and mass ordering effects. This ambitious yet cost-effective design incorporates scalability and flexibility and can accommodate a variety of upgrades and contributions. With its exceptional combination of experimental configuration, technical capabilities, and potential for transformative discoveries, LBNE promises to be a vital facility for the field of particle physics worldwide, providing physicists from around the globe with opportunities to collaborate in a twenty to thirty year program of exciting science. In this document we provide a comprehensive overview of LBNE's scientific objectives, its place in the landscape of neutrino physics worldwide, the technologies it will incorporate and the capabilities it will possess.
△ Less
Submitted 22 April, 2014; v1 submitted 28 July, 2013;
originally announced July 2013.
-
Long baseline neutrino beams at Fermilab
Authors:
S. Childress,
J. Strait
Abstract:
Fermilab has had a very active long baseline neutrino program since initiation of the NuMI project in 1998. Commissioned in 2005, the NuMI beam with 400 kW design power has been in operation for the MINOS neutrino oscillation program since that time. Upgrade of NuMI to 700 kW for NOvA is now well advanced, with implementation of the beam upgrades to be accomplished in 2012-2013. Design development…
▽ More
Fermilab has had a very active long baseline neutrino program since initiation of the NuMI project in 1998. Commissioned in 2005, the NuMI beam with 400 kW design power has been in operation for the MINOS neutrino oscillation program since that time. Upgrade of NuMI to 700 kW for NOvA is now well advanced, with implementation of the beam upgrades to be accomplished in 2012-2013. Design development for the next generation LBNE neutrino beam is now a major ongoing effort. We report here salient features and constraints for each of these beams, as well as significant challenges both experienced and expected.
△ Less
Submitted 17 April, 2013;
originally announced April 2013.
-
Confined Plasmons in Graphene Microstructures: Experiments and Theory
Authors:
Jared H. Strait,
Parinita S. Nene,
Wei-Min Chan,
Christina Manolatou,
Joshua W. Kevek,
Sandip Tiwari,
Paul L. McEuen,
Farhan Rana
Abstract:
Graphene, a two-dimensional material with a high mobility and a tunable conductivity, is uniquely suited for plasmonics. The frequency dispersion of plasmons in bulk graphene has been studied both theoretically and experimentally, whereas no theoretical models have been reported and tested against experiments for confined plasmon modes in graphene microstructures. In this paper, we present experim…
▽ More
Graphene, a two-dimensional material with a high mobility and a tunable conductivity, is uniquely suited for plasmonics. The frequency dispersion of plasmons in bulk graphene has been studied both theoretically and experimentally, whereas no theoretical models have been reported and tested against experiments for confined plasmon modes in graphene microstructures. In this paper, we present experimental measurements as well as analytical and computational models for such confined modes. We compare experimental measurements with theory for plasmon modes in interacting arrays of graphene strips and demonstrate a good agreement. The comparison between experimental and theoretical results reveals the important role played by interaction among the plasmon modes of neighboring graphene structures.
△ Less
Submitted 5 March, 2013; v1 submitted 24 February, 2013;
originally announced February 2013.
-
Fundamental Physics at the Intensity Frontier
Authors:
J. L. Hewett,
H. Weerts,
R. Brock,
J. N. Butler,
B. C. K. Casey,
J. Collar,
A. de Gouvea,
R. Essig,
Y. Grossman,
W. Haxton,
J. A. Jaros,
C. K. Jung,
Z. T. Lu,
K. Pitts,
Z. Ligeti,
J. R. Patterson,
M. Ramsey-Musolf,
J. L. Ritchie,
A. Roodman,
K. Scholberg,
C. E. M. Wagner,
G. P. Zeller,
S. Aefsky,
A. Afanasev,
K. Agashe
, et al. (443 additional authors not shown)
Abstract:
The Proceedings of the 2011 workshop on Fundamental Physics at the Intensity Frontier. Science opportunities at the intensity frontier are identified and described in the areas of heavy quarks, charged leptons, neutrinos, proton decay, new light weakly-coupled particles, and nucleons, nuclei, and atoms.
The Proceedings of the 2011 workshop on Fundamental Physics at the Intensity Frontier. Science opportunities at the intensity frontier are identified and described in the areas of heavy quarks, charged leptons, neutrinos, proton decay, new light weakly-coupled particles, and nucleons, nuclei, and atoms.
△ Less
Submitted 11 May, 2012;
originally announced May 2012.
-
Interim Design Report
Authors:
R. J. Abrams,
S. K. Agarwalla,
A. Alekou,
C. Andreopoulos,
C. M. Ankenbrandt,
S. Antusch,
M. Apollonio,
M. Aslaninejad,
J. Back,
P. Ballett,
G. Barker,
K. B. Beard,
E. Benedetto,
J. R. J. Bennett,
J. S. Berg,
S. Bhattacharya,
V. Blackmore,
M. Blennow,
A. Blondel,
A. Bogacz,
M. Bonesini,
C. Bontoiu,
C. Booth,
C. Bromberg,
S. Brooks
, et al. (111 additional authors not shown)
Abstract:
The International Design Study for the Neutrino Factory (the IDS-NF) was established by the community at the ninth "International Workshop on Neutrino Factories, super-beams, and beta- beams" which was held in Okayama in August 2007. The IDS-NF mandate is to deliver the Reference Design Report (RDR) for the facility on the timescale of 2012/13. In addition, the mandate for the study [3] requires a…
▽ More
The International Design Study for the Neutrino Factory (the IDS-NF) was established by the community at the ninth "International Workshop on Neutrino Factories, super-beams, and beta- beams" which was held in Okayama in August 2007. The IDS-NF mandate is to deliver the Reference Design Report (RDR) for the facility on the timescale of 2012/13. In addition, the mandate for the study [3] requires an Interim Design Report to be delivered midway through the project as a step on the way to the RDR. This document, the IDR, has two functions: it marks the point in the IDS-NF at which the emphasis turns to the engineering studies required to deliver the RDR and it documents baseline concepts for the accelerator complex, the neutrino detectors, and the instrumentation systems. The IDS-NF is, in essence, a site-independent study. Example sites, CERN, FNAL, and RAL, have been identified to allow site-specific issues to be addressed in the cost analysis that will be presented in the RDR. The choice of example sites should not be interpreted as implying a preferred choice of site for the facility.
△ Less
Submitted 13 December, 2011;
originally announced December 2011.
-
The 2010 Interim Report of the Long-Baseline Neutrino Experiment Collaboration Physics Working Groups
Authors:
The LBNE Collaboration,
T. Akiri,
D. Allspach,
M. Andrews,
K. Arisaka,
E. Arrieta-Diaz,
M. Artuso,
X. Bai,
B. Balantekin,
B. Baller,
W. Barletta,
G. Barr,
M. Bass,
A. Beck,
B. Becker,
V. Bellini,
O. Benhar,
B. Berger,
M. Bergevin,
E. Berman,
H. Berns,
A. Bernstein,
F. Beroz,
V. Bhatnagar,
B. Bhuyan
, et al. (308 additional authors not shown)
Abstract:
In early 2010, the Long-Baseline Neutrino Experiment (LBNE) science collaboration initiated a study to investigate the physics potential of the experiment with a broad set of different beam, near- and far-detector configurations. Nine initial topics were identified as scientific areas that motivate construction of a long-baseline neutrino experiment with a very large far detector. We summarize the…
▽ More
In early 2010, the Long-Baseline Neutrino Experiment (LBNE) science collaboration initiated a study to investigate the physics potential of the experiment with a broad set of different beam, near- and far-detector configurations. Nine initial topics were identified as scientific areas that motivate construction of a long-baseline neutrino experiment with a very large far detector. We summarize the scientific justification for each topic and the estimated performance for a set of far detector reference configurations. We report also on a study of optimized beam parameters and the physics capability of proposed Near Detector configurations. This document was presented to the collaboration in fall 2010 and updated with minor modifications in early 2011.
△ Less
Submitted 26 October, 2011;
originally announced October 2011.
-
Very Slow Cooling Dynamics of Photoexcited Carriers in Graphene Observed by Optical-Pump Terahertz-Probe Spectroscopy
Authors:
Jared H. Strait,
Haining Wang,
Shriram Shivaraman,
Virgil B. Shields,
Michael G. Spencer,
Farhan Rana
Abstract:
Using optical-pump terahertz-probe spectroscopy, we study the relaxation dynamics of photoexcited carriers in graphene at different temperatures. We find that at lower temperatures the tail of the relaxation transients as measured by the differential probe transmission becomes slower, extending beyond several hundred picoseconds at temperatures below 50K. We interpret the observed relaxation trans…
▽ More
Using optical-pump terahertz-probe spectroscopy, we study the relaxation dynamics of photoexcited carriers in graphene at different temperatures. We find that at lower temperatures the tail of the relaxation transients as measured by the differential probe transmission becomes slower, extending beyond several hundred picoseconds at temperatures below 50K. We interpret the observed relaxation transients as resulting from the cooling of the photoexcited carriers via phonon emission. The slow cooling of the photoexcited carriers at low temperatures is attributed to the bulk of the electron and hole energy distributions moving close enough to the Dirac point such that both intraband and interband scattering of carriers via optical phonon emission becomes inefficient for removing heat from the carriers. Our model, which includes intraband carrier scattering and interband carrier recombination and generation, agrees very well with the experimental observations.
△ Less
Submitted 12 August, 2011;
originally announced August 2011.
-
Towards the optimal energy of the proton driver for a neutrino factory and muon collider
Authors:
J. Strait,
N. V. Mokhov,
S. I. Striganov
Abstract:
Cross section data from the HARP experiment for pion production by protons from a tantalum target have been convoluted with the acceptance of the front-end channel for the proposed neutrino factory or muon collider and integrated over the full phase space measured by HARP, to determine the beam-energy dependence of the muon yield. This permits a determination of the optimal beam energy for the pro…
▽ More
Cross section data from the HARP experiment for pion production by protons from a tantalum target have been convoluted with the acceptance of the front-end channel for the proposed neutrino factory or muon collider and integrated over the full phase space measured by HARP, to determine the beam-energy dependence of the muon yield. This permits a determination of the optimal beam energy for the proton driver for these projects. The cross section data are corrected for the beam-energy dependent amplification due to the development of hadronic showers in a thick target. The conclusion is that, for constant beam power, the yield is maximum for a beam energy of about 7 GeV, but it is within 10% of this maximum for 4<Tbeam < 11 GeV, and within 20% of the maximum for Tbeam as low as 2 GeV. This result is insensitive to which of the two HARP groups' results are used, and to which pion generator is used to compute the thick target effects.
△ Less
Submitted 10 November, 2010;
originally announced November 2010.
-
Ultrafast Carrier Recombination and Generation Rates for Plasmon Emission and Absorption in Graphene
Authors:
Farhan Rana,
Jared H. Strait,
Haining Wang,
Christina Manolatou
Abstract:
Electron-hole generation and recombination rates for plasmon emission and absorption in Graphene are presented. The recombination times of carriers due to plasmon emission have been found to be in the tens of femtoseconds to hundreds of picoseconds range. The recombination times depend sensitively on the carrier energy, carrier density, temperature, and the plasmon dispersion. Carriers near the Di…
▽ More
Electron-hole generation and recombination rates for plasmon emission and absorption in Graphene are presented. The recombination times of carriers due to plasmon emission have been found to be in the tens of femtoseconds to hundreds of picoseconds range. The recombination times depend sensitively on the carrier energy, carrier density, temperature, and the plasmon dispersion. Carriers near the Dirac point are found to have much longer lifetimes compared to carriers at higher energies. Plasmons in a Graphene layer on a polar substrate hybridize with the surface optical phonons and this hybridization modifies the plasmon dispersion. We also present generation and recombination rates of carriers due to plasmon emission and absorption in Graphene layers on polar substrates.
△ Less
Submitted 10 June, 2011; v1 submitted 14 September, 2010;
originally announced September 2010.
-
Ultrafast Relaxation Dynamics of Hot Optical Phonons in Graphene
Authors:
Haining Wang,
Jared H. Strait,
Paul A. George,
Shriram Shivaraman,
Virgil B. Shields,
Mvs Chandrashekhar,
Jeonghyun Hwang,
Carlos S. Ruiz-Vargas,
Farhan Rana,
Michael G. Spencer,
Jiwoong Park
Abstract:
Using ultrafast optical pump-probe spectroscopy, we study the relaxation dynamics of hot optical phonons in few-layer and multi-layer graphene films grown by epitaxy on silicon carbide substrates and by chemical vapor deposition on nickel substrates. In the first few hundred femtoseconds after photoexcitation, the hot carriers lose most of their energy to the generation of hot optical phonons wh…
▽ More
Using ultrafast optical pump-probe spectroscopy, we study the relaxation dynamics of hot optical phonons in few-layer and multi-layer graphene films grown by epitaxy on silicon carbide substrates and by chemical vapor deposition on nickel substrates. In the first few hundred femtoseconds after photoexcitation, the hot carriers lose most of their energy to the generation of hot optical phonons which then present the main bottleneck to subsequent carrier cooling. Optical phonon cooling on short time scales is found to be independent of the graphene growth technique, the number of layers, and the type of the substrate. We find average phonon lifetimes in the 2.5-2.55 ps range. We model the relaxation dynamics of the coupled carrier-phonon system with rate equations and find a good agreement between the experimental data and the theory. The extracted optical phonon lifetimes agree very well with the theory based on anharmonic phonon interactions.
△ Less
Submitted 28 December, 2009; v1 submitted 26 September, 2009;
originally announced September 2009.
-
Measurements of the Carrier Dynamics and Terahertz Response of Oriented Germanium Nanowires using Optical-Pump Terahertz-Probe Spectroscopy
Authors:
Jared H. Strait,
Paul A. George,
Mark Levendorf,
Martin Blood-Forsythe,
Farhan Rana,
Jiwoong Park
Abstract:
We have measured the terahertz response of oriented germanium nanowires using ultrafast optical-pump terahertz-probe spectroscopy. We present results on the time, frequency, and polarization dependence of the terahertz response. Our results indicate intraband energy relaxation times of photoexcited carriers in the 1.5-2.0 ps range, carrier density dependent interband electron-hole recombination…
▽ More
We have measured the terahertz response of oriented germanium nanowires using ultrafast optical-pump terahertz-probe spectroscopy. We present results on the time, frequency, and polarization dependence of the terahertz response. Our results indicate intraband energy relaxation times of photoexcited carriers in the 1.5-2.0 ps range, carrier density dependent interband electron-hole recombination times in the 75-125 ps range, and carrier momentum scattering rates in the 60-90 fs range. Additionally, the terahertz response of the nanowires is strongly polarization dependent despite the subwavelength dimensions of the nanowires. The differential terahertz transmission is found to be large when the field is polarized parallel to the nanowires and very small when the field is polarized perpendicular to the nanowires. This polarization dependence of the terahertz response can be explained in terms of the induced depolarization fields and the resulting magnitudes of the surface plasmon frequencies.
△ Less
Submitted 8 May, 2009;
originally announced May 2009.
-
Carrier Recombination and Generation Rates for Intravalley and Intervalley Phonon Scattering in Graphene
Authors:
Farhan Rana,
Paul A. George,
Jared H. Strait,
Jahan Dawlaty,
Shriram Shivaraman,
Mvs Chandrashekhar,
Michael G. Spencer
Abstract:
Electron-hole generation and recombination rates for intravalley and intervalley phonon scattering in Graphene are presented. The transverse and the longitudinal optical phonon modes ($E_{2g}$-modes) near the zone center ($Γ$-point) contribute to intravalley interband carrier scattering. At the zone edge ($K(K')$-point), only the transverse optical phonon mode ($A'_{1}$-mode) contributes signifi…
▽ More
Electron-hole generation and recombination rates for intravalley and intervalley phonon scattering in Graphene are presented. The transverse and the longitudinal optical phonon modes ($E_{2g}$-modes) near the zone center ($Γ$-point) contribute to intravalley interband carrier scattering. At the zone edge ($K(K')$-point), only the transverse optical phonon mode ($A'_{1}$-mode) contributes significantly to intervalley interband scattering with recombination rates faster than those due to zone center phonons. The calculated recombination times range from less than a picosecond to more than hundreds of picoseconds and are strong functions of temperature and electron and hole densities. The theoretical calculations agree well with experimental measurements of the recombination rates of photoexcited carriers in graphene.
△ Less
Submitted 5 January, 2009; v1 submitted 2 January, 2009;
originally announced January 2009.
-
Emission of Terahertz Radiation from SiC
Authors:
Jared H. Strait,
Paul A. George,
Jahan Dawlaty,
Shriram Shivaraman,
Mvs Chandrashekhar,
Farhan Rana,
Michael G. Spencer
Abstract:
We report the emission of strong coherent broadband terahertz radiation from 6H-Silicon-Carbide (SiC) excited with optical pulses. The measured terahertz spectral signal-to-noise ratio is better than one thousand. We determine that the terahertz radiation is generated via second order optical nonlinearity (optical rectification). We present a measurement of the ratio of nonlinear susceptibility…
▽ More
We report the emission of strong coherent broadband terahertz radiation from 6H-Silicon-Carbide (SiC) excited with optical pulses. The measured terahertz spectral signal-to-noise ratio is better than one thousand. We determine that the terahertz radiation is generated via second order optical nonlinearity (optical rectification). We present a measurement of the ratio of nonlinear susceptibility tensor elements $χ_{zzz}^{(2)}/χ_{zxx}^{(2)}$ and the complex index of refraction of silicon carbide at THz frequencies.
△ Less
Submitted 13 May, 2009; v1 submitted 4 September, 2008;
originally announced September 2008.
-
Ultrafast Optical-Pump Terahertz-Probe Spectroscopy of the Carrier Relaxation and Recombination Dynamics in Epitaxial Graphene
Authors:
Paul A. George,
Jared Strait,
Jahan Dawlaty,
Shriram Shivaraman,
Mvs Chandrashekhar,
Farhan Rana,
Michael G. Spencer
Abstract:
The ultrafast relaxation and recombination dynamics of photogenerated electrons and holes in epitaxial graphene are studied using optical-pump Terahertz-probe spectroscopy. The conductivity in graphene at Terahertz frequencies depends on the carrier concentration as well as the carrier distribution in energy. Time-resolved studies of the conductivity can therefore be used to probe the dynamics a…
▽ More
The ultrafast relaxation and recombination dynamics of photogenerated electrons and holes in epitaxial graphene are studied using optical-pump Terahertz-probe spectroscopy. The conductivity in graphene at Terahertz frequencies depends on the carrier concentration as well as the carrier distribution in energy. Time-resolved studies of the conductivity can therefore be used to probe the dynamics associated with carrier intraband relaxation and interband recombination. We report the electron-hole recombination times in epitaxial graphene for the first time. Our results show that carrier cooling occurs on sub-picosecond time scales and that interband recombination times are carrier density dependent.
△ Less
Submitted 22 July, 2008; v1 submitted 30 May, 2008;
originally announced May 2008.
-
Measurement of the Optical Absorption Spectra of Epitaxial Graphene from Terahertz to Visible
Authors:
Jahan M. Dawlaty,
Shriram Shivaraman,
Jared Strait,
Paul George,
Mvs Chandrashekhar,
Farhan Rana,
Michael G. Spencer,
Dmitry Veksler,
Yunqing Chen
Abstract:
We present experimental results on the optical absorption spectra of epitaxial graphene from the visible to the terahertz (THz) frequency range. In the THz range, the absorption is dominated by intraband processes with a frequency dependence similar to the Drude model. In the near IR range, the absorption is due to interband processes and the measured optical conductivity is close to the theoret…
▽ More
We present experimental results on the optical absorption spectra of epitaxial graphene from the visible to the terahertz (THz) frequency range. In the THz range, the absorption is dominated by intraband processes with a frequency dependence similar to the Drude model. In the near IR range, the absorption is due to interband processes and the measured optical conductivity is close to the theoretical value of $e^{2}/4\hbar$. We extract values for the carrier densities, the number of carbon atom layers, and the intraband scattering times from the measurements.
△ Less
Submitted 16 August, 2008; v1 submitted 22 January, 2008;
originally announced January 2008.
-
Tevatron energy and luminosity upgrades beyond the Main Injector
Authors:
D. Amidei,
A. Baden,
G. Foster,
G. Jackson,
T. Kamon,
J. Lopez,
P. McIntyre,
J. Strait,
J. White
Abstract:
The Fermilab Tevatron will be the world's highest energy hadron collider until the LHC is commissioned, it has the world's highest energy fixed target beams, and Fermilab will be the leading high energy physics laboratory in the US for the foreseeable future. Following the demise of the SSC, a number of possible upgrades to the Tevatron complex, beyond construction of the Main Injector, are bein…
▽ More
The Fermilab Tevatron will be the world's highest energy hadron collider until the LHC is commissioned, it has the world's highest energy fixed target beams, and Fermilab will be the leading high energy physics laboratory in the US for the foreseeable future. Following the demise of the SSC, a number of possible upgrades to the Tevatron complex, beyond construction of the Main Injector, are being discussed. Using existing technology, it appears possible to increase the luminosity of the $\bar{p}p$ Collider to at least $10^{33}$cm$^{-2}$sec$^{-1}$ (Tevatron-Star) and to increase the beam energy to 2 TeV (DiTevatron). Fixed target beam of energy about 1.5 TeV could also be delivered. Leaving the existing Tevatron in the tunnel and constructing bypasses around the collider halls would allow simultaneous 800 GeV fixed target and $\sqrt{s}$ = 4 TeV collider operation. These upgrades would give Fermilab an exciting physics program which would be complementary to the LHC, and they would lay the groundwork for the construction of a possible post-LHC ultra-high energy hadron collider. (Presented at the Eighth Meeting of the Division of Particles and Fields Albuquerque, New Mexico, August 2-6, 1994.)
△ Less
Submitted 20 August, 1994;
originally announced August 1994.