-
Report on the Advanced Linear Collider Study Group (ALEGRO) Workshop 2024
Authors:
J. Vieira,
B. Cros,
P. Muggli,
I. A. Andriyash,
O. Apsimon,
M. Backhouse,
C. Benedetti,
S. S. Bulanov,
A. Caldwell,
Min Chen,
V. Cilento,
S. Corde,
R. D'Arcy,
S. Diederichs,
E. Ericson,
E. Esarey,
J. Farmer,
L. Fedeli,
A. Formenti,
B. Foster,
M. Garten,
C. G. R. Geddes,
T. Grismayer,
M. J. Hogan,
S. Hooker
, et al. (19 additional authors not shown)
Abstract:
The workshop focused on the application of ANAs to particle physics keeping in mind the ultimate goal of a collider at the energy frontier (10\,TeV, e$^+$/e$^-$, e$^-$/e$^-$, or $γγ$). The development of ANAs is conducted at universities and national laboratories worldwide. The community is thematically broad and diverse, in particular since lasers suitable for ANA research (multi-hundred-terawatt…
▽ More
The workshop focused on the application of ANAs to particle physics keeping in mind the ultimate goal of a collider at the energy frontier (10\,TeV, e$^+$/e$^-$, e$^-$/e$^-$, or $γγ$). The development of ANAs is conducted at universities and national laboratories worldwide. The community is thematically broad and diverse, in particular since lasers suitable for ANA research (multi-hundred-terawatt peak power, a few tens of femtosecond-long pulses) and acceleration of electrons to hundreds of mega electron volts to multi giga electron volts became commercially available. The community spans several continents (Europe, America, Asia), including more than 62 laboratories in more than 20 countries. It is among the missions of the ICFA-ANA panel to feature the amazing progress made with ANAs, to provide international coordination and to foster international collaborations towards a future HEP collider. The scope of this edition of the workshop was to discuss the recent progress and necessary steps towards realizing a linear collider for particle physics based on novel-accelerator technologies (laser or beam driven in plasma or structures). Updates on the relevant aspects of the European Strategy for Particle Physics (ESPP) Roadmap Process as well as of the P5 (in the US) were presented, and ample time was dedicated to discussions. The major outcome of the workshop is the decision for ALEGRO to coordinate efforts in Europe, in the US, and in Asia towards a pre-CDR for an ANA-based, 10\,TeV CM collider. This goal of this coordination is to lead to a funding proposal to be submitted to both EU and EU/US funding agencies. This document presents a summary of the workshop, as seen by the co-chairs, as well as short 'one-pagers' written by the presenters at the workshop.
△ Less
Submitted 15 August, 2024; v1 submitted 6 August, 2024;
originally announced August 2024.
-
Bayesian optimization of laser-plasma accelerators assisted by reduced physical models
Authors:
A. Ferran Pousa,
S. Jalas,
M. Kirchen,
A. Martinez de la Ossa,
M. Thévenet,
S. Hudson,
J. Larson,
A. Huebl,
J. -L. Vay,
R. Lehe
Abstract:
Particle-in-cell simulations are among the most essential tools for the modeling and optimization of laser-plasma accelerators, since they reproduce the physics from first principles. However, the high computational cost associated with them can severely limit the scope of parameter and design optimization studies. Here, we show that a multitask Bayesian optimization algorithm can be used to mitig…
▽ More
Particle-in-cell simulations are among the most essential tools for the modeling and optimization of laser-plasma accelerators, since they reproduce the physics from first principles. However, the high computational cost associated with them can severely limit the scope of parameter and design optimization studies. Here, we show that a multitask Bayesian optimization algorithm can be used to mitigate the need for such high-fidelity simulations by incorporating information from inexpensive evaluations of reduced physical models. In a proof-of-principle study, where a high-fidelity optimization with FBPIC is assisted by reduced-model simulations with Wake-T, the algorithm demonstrates an order-of-magnitude speedup. This opens a path for the cost-effective optimization of laser-plasma accelerators in large parameter spaces, an important step towards fulfilling the high beam quality requirements of future applications.
△ Less
Submitted 23 December, 2022;
originally announced December 2022.
-
Linear colliders based on laser-plasma accelerators
Authors:
C. Benedetti,
S. S. Bulanov,
E. Esarey,
C. G. R. Geddes,
A. J. Gonsalves,
A. Huebl,
R. Lehe,
K. Nakamura,
C. B. Schroeder,
D. Terzani,
J. van Tilborg,
M. Turner,
J. -L. Vay,
T. Zhou,
F. Albert,
J. Bromage,
E. M. Campbell,
D. H. Froula,
J. P. Palastro,
J. Zuegel,
D. Bruhwiler,
N. M. Cook,
B. Cros,
M. C. Downer,
M. Fuchs
, et al. (18 additional authors not shown)
Abstract:
White paper to the Proceedings of the U.S. Particle Physics Community Planning Exercise (Snowmass 2021): Linear colliders based on laser-plasma accelerators
White paper to the Proceedings of the U.S. Particle Physics Community Planning Exercise (Snowmass 2021): Linear colliders based on laser-plasma accelerators
△ Less
Submitted 4 July, 2022; v1 submitted 15 March, 2022;
originally announced March 2022.
-
Snowmass21 Accelerator Modeling Community White Paper
Authors:
S. Biedron,
L. Brouwer,
D. L. Bruhwiler,
N. M. Cook,
A. L. Edelen,
D. Filippetto,
C. -K. Huang,
A. Huebl,
T. Katsouleas,
N. Kuklev,
R. Lehe,
S. Lund,
C. Messe,
W. Mori,
C. -K. Ng,
D. Perez,
P. Piot,
J. Qiang,
R. Roussel,
D. Sagan,
A. Sahai,
A. Scheinker,
M. Thévenet,
F. Tsung,
J. -L. Vay
, et al. (2 additional authors not shown)
Abstract:
After a summary of relevant comments and recommendations from various reports over the last ten years, this paper examines the modeling needs in accelerator physics, from the modeling of single beams and individual accelerator elements, to the realization of virtual twins that replicate all the complexity to model a particle accelerator complex as accurately as possible. We then discuss cutting-ed…
▽ More
After a summary of relevant comments and recommendations from various reports over the last ten years, this paper examines the modeling needs in accelerator physics, from the modeling of single beams and individual accelerator elements, to the realization of virtual twins that replicate all the complexity to model a particle accelerator complex as accurately as possible. We then discuss cutting-edge and emerging computing opportunities, such as advanced algorithms, AI/ML and quantum computing, computational needs in hardware, software performance, portability and scalability, and needs for scalable I/O and in-situ analysis. Considerations of reliability, long-term sustainability, user support and training are considered next, before discussing the benefits of ecosystems with integrated workflows based on standardized input and output, and with integrated frameworks and data repositories developed as a community. Last, we highlight how the community can work more collaboratively and efficiently through the development of consortia and centers, and via collaboration with industry.
△ Less
Submitted 22 September, 2022; v1 submitted 15 March, 2022;
originally announced March 2022.
-
Accelerator and Beam Physics: Grand Challenges and Research Opportunities
Authors:
S. Nagaitsev,
V. Shiltsev,
A. Valishev,
T. Zolkin,
J. -L. Vay,
M. Bai,
Y. Cai,
M. J. Hogan,
Z. Huang,
J. Seeman,
B. Dunham,
X. Huang,
T. Roser,
M. Minty,
J. Rosenzweig,
P. Piot,
J. Power,
J. M. Byrd,
A. Seryi,
S. Lund,
J. R. Patterson
Abstract:
Accelerator and beam physics (ABP) is the science of the motion, generation, acceleration, manipulation, prediction, observation and use of charged particle beams. It focuses on fundamental long-term accelerator and beam physics research and development. Accelerator and beam physics research has resulted in important advances in accelerator science, yet support for this research is declining. NSF…
▽ More
Accelerator and beam physics (ABP) is the science of the motion, generation, acceleration, manipulation, prediction, observation and use of charged particle beams. It focuses on fundamental long-term accelerator and beam physics research and development. Accelerator and beam physics research has resulted in important advances in accelerator science, yet support for this research is declining. NSF has terminated its program in accelerator Science and funding by DOE through GARD and Accelerator Stewardship has been steady or declining. The declining support for accelerator research will slow advances and threaten student training and work-force development in accelerator science. We propose a robust and scientifically challenging program in accelerator and beam physics, which will position the field of US High Energy Physics to be productive and competitive for decades to come.
△ Less
Submitted 13 March, 2022;
originally announced March 2022.
-
Modeling of Advanced Accelerator Concepts
Authors:
J. -L. Vay,
A. Huebl,
R. Lehe,
N. M. Cook,
R. J. England,
U. Niedermayer,
P. Piot,
F. Tsung,
D. Winklehner
Abstract:
Computer modeling is essential to research on Advanced Accelerator Concepts (AAC), as well as to their design and operation. This paper summarizes the current status and future needs of AAC systems and reports on several key aspects of (i) high-performance computing (including performance, portability, scalability, advanced algorithms, scalable I/Os and In-Situ analysis), (ii) the benefits of ecos…
▽ More
Computer modeling is essential to research on Advanced Accelerator Concepts (AAC), as well as to their design and operation. This paper summarizes the current status and future needs of AAC systems and reports on several key aspects of (i) high-performance computing (including performance, portability, scalability, advanced algorithms, scalable I/Os and In-Situ analysis), (ii) the benefits of ecosystems with integrated workflows based on standardized input and output and with integrated frameworks developed as a community, and (iii) sustainability and reliability (including code robustness and usability).
△ Less
Submitted 14 September, 2021; v1 submitted 10 September, 2021;
originally announced September 2021.
-
Simulations of Future Particle Accelerators: Issues and Mitigations
Authors:
D. Sagan,
M. Berz,
N. M. Cook,
Y. Hao,
G. Hoffstaetter,
A. Huebl,
C. -K. Huang,
M. H. Langston,
C. E. Mayes,
C. E. Mitchell,
C. -K. Ng,
J. Qiang,
R. D. Ryne,
A. Scheinker,
E. Stern,
J. -L. Vay,
D. Winklehner,
H. Zhang
Abstract:
The ever increasing demands placed upon machine performance have resulted in the need for more comprehensive particle accelerator modeling. Computer simulations are key to the success of particle accelerators. Many aspects of particle accelerators rely on computer modeling at some point, sometimes requiring complex simulation tools and massively parallel supercomputing. Examples include the modeli…
▽ More
The ever increasing demands placed upon machine performance have resulted in the need for more comprehensive particle accelerator modeling. Computer simulations are key to the success of particle accelerators. Many aspects of particle accelerators rely on computer modeling at some point, sometimes requiring complex simulation tools and massively parallel supercomputing. Examples include the modeling of beams at extreme intensities and densities (toward the quantum degeneracy limit), and with ultra-fine control (down to the level of individual particles). In the future, adaptively tuned models might also be relied upon to provide beam measurements beyond the resolution of existing diagnostics. Much time and effort has been put into creating accelerator software tools, some of which are highly successful. However, there are also shortcomings such as the general inability of existing software to be easily modified to meet changing simulation needs. In this paper possible mitigating strategies are discussed for issues faced by the accelerator community as it endeavors to produce better and more comprehensive modeling tools. This includes lack of coordination between code developers, lack of standards to make codes portable and/or reusable, lack of documentation, among others.
△ Less
Submitted 24 August, 2021;
originally announced August 2021.
-
Porting WarpX to GPU-accelerated platforms
Authors:
A. Myers,
A. Almgren,
L. D. Amorim,
J. Bell,
L. Fedeli,
L. Ge,
K. Gott,
D. P. Grote,
M. Hogan,
A. Huebl,
R. Jambunathan,
R. Lehe,
C. Ng,
M. Rowan,
O. Shapoval,
M. Thévenet,
J. -L. Vay,
H. Vincenti,
E. Yang,
N. Zaïm,
W. Zhang,
Y. Zhao,
E. Zoni
Abstract:
WarpX is a general purpose electromagnetic particle-in-cell code that was originally designed to run on many-core CPU architectures. We describe the strategy followed to allow WarpX to use the GPU-accelerated nodes on OLCF's Summit supercomputer, a strategy we believe will extend to the upcoming machines Frontier and Aurora. We summarize the challenges encountered, lessons learned, and give curren…
▽ More
WarpX is a general purpose electromagnetic particle-in-cell code that was originally designed to run on many-core CPU architectures. We describe the strategy followed to allow WarpX to use the GPU-accelerated nodes on OLCF's Summit supercomputer, a strategy we believe will extend to the upcoming machines Frontier and Aurora. We summarize the challenges encountered, lessons learned, and give current performance results on a series of relevant benchmark problems.
△ Less
Submitted 2 September, 2021; v1 submitted 28 January, 2021;
originally announced January 2021.
-
Accelerator and Beam Physics Research Goals and Opportunities
Authors:
S. Nagaitsev,
Z. Huang,
J. Power,
J. -L. Vay,
P. Piot,
L. Spentzouris,
J. Rosenzweig,
Y. Cai,
S. Cousineau,
M. Conde,
M. Hogan,
A. Valishev,
M. Minty,
T. Zolkin,
X. Huang,
V. Shiltsev,
J. Seeman,
J. Byrd,
Y. Hao,
B. Dunham,
B. Carlsten,
A. Seryi,
R. Patterson
Abstract:
This report is a summary of two preparatory workshops, documenting the community vision for the national accelerator and beam physics research program. It identifies the Grand Challenges of accelerator and beam physics (ABP) field and documents research opportunities to address these Grand Challenges. This report will be used to develop a strategic research roadmap for the field of accelerator sci…
▽ More
This report is a summary of two preparatory workshops, documenting the community vision for the national accelerator and beam physics research program. It identifies the Grand Challenges of accelerator and beam physics (ABP) field and documents research opportunities to address these Grand Challenges. This report will be used to develop a strategic research roadmap for the field of accelerator science.
△ Less
Submitted 25 January, 2021; v1 submitted 11 January, 2021;
originally announced January 2021.
-
Investigation of light ion fusion reactions with plasma discharges
Authors:
T. Schenkel,
A. Persaud,
H. Wang,
P. A. Seidl,
R. MacFadyen,
C. Nelson,
W. L. Waldron,
J. -L. Vay,
G. Deblonde,
B. Wen,
Y. -M. Chiang,
B. P. MacLeod,
Q. Ji
Abstract:
The scaling of reaction yields in light ion fusion to low reaction energies is important for our understanding of stellar fuel chains and the development of future energy technologies. Experiments become progressively more challenging at lower reaction energies due to the exponential drop of fusion cross sections below the Coulomb barrier. We report on experiments where deuterium-deuterium (D-D) f…
▽ More
The scaling of reaction yields in light ion fusion to low reaction energies is important for our understanding of stellar fuel chains and the development of future energy technologies. Experiments become progressively more challenging at lower reaction energies due to the exponential drop of fusion cross sections below the Coulomb barrier. We report on experiments where deuterium-deuterium (D-D) fusion reactions are studied in a pulsed plasma in the glow discharge regime using a benchtop apparatus. We model plasma conditions using particle-in-cell codes. Advantages of this approach are relatively high peak ion currents and current densities (0.1 to several A/cm^2) that can be applied to metal wire cathodes for several days. We detect neutrons from D-D reactions with scintillator-based detectors. For palladium targets, we find neutron yields as a function of cathode voltage that are over 100 times higher than yields expected for bare nuclei fusion at ion energies below 2 keV (center of mass frame). A possible explanation is a correction to the ion energy due to an electron screening potential of 1000+/-250 eV, which increases the probability for tunneling through the repulsive Coulomb barrier. Our compact, robust setup enables parametric studies of this effect at relatively low reaction energies.
△ Less
Submitted 24 May, 2019; v1 submitted 8 May, 2019;
originally announced May 2019.
-
Investigation of the dynamics of ionization induced injected electrons under the influence of beam loading effects
Authors:
P. Lee,
T. L. Audet,
R. Lehe,
J. -L. Vay,
G. Maynard,
B. Cros
Abstract:
In laser-driven wakefield, ionization induced injection is an efficient way to inject electrons in the plasma wave. A detailed study on the beam dynamics under the influence of beam loading effects, which can be controlled by the concentration of nitrogen impurity introduced in the hydrogen gas was conducted. For a specific value of this percentage, the final energy of the high-energy electron bun…
▽ More
In laser-driven wakefield, ionization induced injection is an efficient way to inject electrons in the plasma wave. A detailed study on the beam dynamics under the influence of beam loading effects, which can be controlled by the concentration of nitrogen impurity introduced in the hydrogen gas was conducted. For a specific value of this percentage, the final energy of the high-energy electron bunch becomes nearly independent of the trapped positions, thus leading to a small energy dispersion. We also show that the final beam emittance is mainly determined by the injection process.
△ Less
Submitted 1 February, 2018;
originally announced February 2018.
-
Warp-X: a new exascale computing platform for beam-plasma simulations
Authors:
J. -L. Vay,
A. Almgren,
J. Bell,
L. Ge,
D. P. Grote,
M. Hogan,
O. Kononenko,
R. Lehe,
A. Myers,
C. Ng,
J. Park,
R. Ryne,
O. Shapoval,
M. Thevenet,
W. Zhang
Abstract:
Turning the current experimental plasma accelerator state-of-the-art from a promising technology into mainstream scientific tools depends critically on high-performance, high-fidelity modeling of complex processes that develop over a wide range of space and time scales. As part of the U.S. Department of Energy's Exascale Computing Project, a team from Lawrence Berkeley National Laboratory, in coll…
▽ More
Turning the current experimental plasma accelerator state-of-the-art from a promising technology into mainstream scientific tools depends critically on high-performance, high-fidelity modeling of complex processes that develop over a wide range of space and time scales. As part of the U.S. Department of Energy's Exascale Computing Project, a team from Lawrence Berkeley National Laboratory, in collaboration with teams from SLAC National Accelerator Laboratory and Lawrence Livermore National Laboratory, is developing a new plasma accelerator simulation tool that will harness the power of future exascale supercomputers for high-performance modeling of plasma accelerators. We present the various components of the codes such as the new Particle-In-Cell Scalable Application Resource (PICSAR) and the redesigned adaptive mesh refinement library AMReX, which are combined with redesigned elements of the Warp code, in the new WarpX software. The code structure, status, early examples of applications and plans are discussed.
△ Less
Submitted 8 January, 2018;
originally announced January 2018.
-
ASCR/HEP Exascale Requirements Review Report
Authors:
Salman Habib,
Robert Roser,
Richard Gerber,
Katie Antypas,
Katherine Riley,
Tim Williams,
Jack Wells,
Tjerk Straatsma,
A. Almgren,
J. Amundson,
S. Bailey,
D. Bard,
K. Bloom,
B. Bockelman,
A. Borgland,
J. Borrill,
R. Boughezal,
R. Brower,
B. Cowan,
H. Finkel,
N. Frontiere,
S. Fuess,
L. Ge,
N. Gnedin,
S. Gottlieb
, et al. (29 additional authors not shown)
Abstract:
This draft report summarizes and details the findings, results, and recommendations derived from the ASCR/HEP Exascale Requirements Review meeting held in June, 2015. The main conclusions are as follows. 1) Larger, more capable computing and data facilities are needed to support HEP science goals in all three frontiers: Energy, Intensity, and Cosmic. The expected scale of the demand at the 2025 ti…
▽ More
This draft report summarizes and details the findings, results, and recommendations derived from the ASCR/HEP Exascale Requirements Review meeting held in June, 2015. The main conclusions are as follows. 1) Larger, more capable computing and data facilities are needed to support HEP science goals in all three frontiers: Energy, Intensity, and Cosmic. The expected scale of the demand at the 2025 timescale is at least two orders of magnitude -- and in some cases greater -- than that available currently. 2) The growth rate of data produced by simulations is overwhelming the current ability, of both facilities and researchers, to store and analyze it. Additional resources and new techniques for data analysis are urgently needed. 3) Data rates and volumes from HEP experimental facilities are also straining the ability to store and analyze large and complex data volumes. Appropriately configured leadership-class facilities can play a transformational role in enabling scientific discovery from these datasets. 4) A close integration of HPC simulation and data analysis will aid greatly in interpreting results from HEP experiments. Such an integration will minimize data movement and facilitate interdependent workflows. 5) Long-range planning between HEP and ASCR will be required to meet HEP's research needs. To best use ASCR HPC resources the experimental HEP program needs a) an established long-term plan for access to ASCR computational and data resources, b) an ability to map workflows onto HPC resources, c) the ability for ASCR facilities to accommodate workflows run by collaborations that can have thousands of individual members, d) to transition codes to the next-generation HPC platforms that will be available at ASCR facilities, e) to build up and train a workforce capable of developing and using simulations and analysis to support HEP scientific research on next-generation systems.
△ Less
Submitted 31 March, 2016; v1 submitted 30 March, 2016;
originally announced March 2016.
-
Ultra-low emittance beam generation using two-color ionization injection in a CO2 laser-driven plasma accelerator
Authors:
C. B. Schroeder,
C. Benedetti,
S. S. Bulanov,
M. Chen,
E. Esarey,
C. G. R. Geddes,
J. -L. Vay,
L. -L. Yu,
W. P. Leemans
Abstract:
Ultra-low emittance (tens of nm) beams can be generated in a plasma accelerator using ionization injection of electrons into a wakefield. An all-optical method of beam generation uses two laser pulses of different colors. A long-wavelength drive laser pulse (with a large ponderomotive force and small peak electric field) is used to excite a large wakefield without fully ionizing a gas, and a short…
▽ More
Ultra-low emittance (tens of nm) beams can be generated in a plasma accelerator using ionization injection of electrons into a wakefield. An all-optical method of beam generation uses two laser pulses of different colors. A long-wavelength drive laser pulse (with a large ponderomotive force and small peak electric field) is used to excite a large wakefield without fully ionizing a gas, and a short-wavelength injection laser pulse (with a small ponderomotive force and large peak electric field), co-propagating and delayed with respect to the pump laser, to ionize a fraction of the remaining bound electrons at a trapped wake phase, generating an electron beam that is accelerated in the wake. The trapping condition, the ionized electron distribution, and the trapped bunch dynamics are discussed. Expressions for the beam transverse emittance, parallel and orthogonal to the ionization laser polarization, are presented. An example is shown using a 10-micron CO2 laser to drive the wake and a frequency-doubled Ti:Al2O3 laser for ionization injection.
△ Less
Submitted 21 May, 2015;
originally announced May 2015.
-
Quasi-monoenergetic femtosecond photon sources from Thomson Scattering using laser plasma accelerators and plasma channels
Authors:
S. G. Rykovanov,
C. G. R. Geddes,
J. -L. Vay,
C. B. Schroeder,
E. Esarey,
W. P. Leemans
Abstract:
Narrow bandwidth, high energy photon sources can be generated by Thomson scattering of laser light from energetic electrons, and detailed control of the interaction is needed to produce high quality sources. We present analytic calculations of the energy-angular spectra and photon yield that parametrize the influences of the electron and laser beam parameters to allow source design. These calculat…
▽ More
Narrow bandwidth, high energy photon sources can be generated by Thomson scattering of laser light from energetic electrons, and detailed control of the interaction is needed to produce high quality sources. We present analytic calculations of the energy-angular spectra and photon yield that parametrize the influences of the electron and laser beam parameters to allow source design. These calculations, combined with numerical simulations, are applied to evaluate sources using conventional scattering in vacuum and methods for improving the source via laser waveguides or plasma channels. We show that the photon flux can be greatly increased by using a plasma channel to guide the laser during the interaction. Conversely, we show that to produce a given number of photons, the required laser energy can be reduced by an order of magnitude through the use of a plasma channel. In addition, we show that a plasma can be used as a compact beam dump, in which the electron beam is decelerated in a short distance, thereby greatly reducing radiation shielding. Realistic experimental errors such as transverse jitter are quantitatively shown to be tolerable. Examples of designs for sources capable of performing nuclear resonance fluorescence and photofission are provided.
△ Less
Submitted 6 June, 2014;
originally announced June 2014.
-
Snowmass 2013 Computing Frontier: Accelerator Science
Authors:
P. Spentzouris,
E. Cormier-Michel,
C. Joshi,
J. Amundson,
W. An,
D. L. Bruhwiler,
J. R. Cary,
B. Cowan,
V. K. Decyk,
E. Esarey,
R. A. Fonseca,
A. Friedman,
C. G. R. Geddes,
D. P. Grote,
I. Kourbanis,
W. P. Leemans,
W. Lu,
W. B. Mori,
C. Ng,
Ji Qiang,
T. Roberts,
R. D. Ryne,
C. B. Schroeder,
L. O. Silva,
F. S. Tsung
, et al. (2 additional authors not shown)
Abstract:
This is the working summary of the Accelerator Science working group of the Computing Frontier of the Snowmass meeting 2013. It summarizes the computing requirements to support accelerator technology in both Energy and Intensity Frontiers.
This is the working summary of the Accelerator Science working group of the Computing Frontier of the Snowmass meeting 2013. It summarizes the computing requirements to support accelerator technology in both Energy and Intensity Frontiers.
△ Less
Submitted 8 October, 2013;
originally announced October 2013.
-
Computational accelerator science needs towards laser-plasma accelerators for future colliders
Authors:
C. G. R. Geddes,
J. -L. Vay,
C. B. Schroeder,
E. Esarey,
W. P. Leemans
Abstract:
Laser plasma accelerators have the potential to reduce the size of future linacs for high energy physics by more than an order of magnitude, due to their high gradient. Research is in progress at current facilities, including the BELLA PetaWatt laser at LBNL, towards high quality 10 GeV beams and staging of multiple modules, as well as control of injection and beam quality. The path towards high-e…
▽ More
Laser plasma accelerators have the potential to reduce the size of future linacs for high energy physics by more than an order of magnitude, due to their high gradient. Research is in progress at current facilities, including the BELLA PetaWatt laser at LBNL, towards high quality 10 GeV beams and staging of multiple modules, as well as control of injection and beam quality. The path towards high-energy physics applications will likely involve hundreds of such stages, with beam transport, conditioning and focusing. Current research focuses on addressing physics and R&D challenges required for a detailed conceptual design of a future collider. Here, the tools used to model these accelerators and their resource requirements are summarized, both for current work and to support R&D addressing issues related to collider concepts.
△ Less
Submitted 27 September, 2013;
originally announced September 2013.
-
Effects of Hyperbolic Rotation in Minkowski Space on the Modeling of Plasma Accelerators in a Lorentz Boosted Frame
Authors:
J. -L. Vay,
C. G. R. Geddes,
E. Cormier-Michel,
D. P. Grote
Abstract:
Laser driven plasma accelerators promise much shorter particle accelerators but their development requires detailed simulations that challenge or exceed current capabilities. We report the first direct simulations of stages up to 1 TeV from simulations using a Lorentz boosted calculation frame resulting in a million times speedup, thanks to a frame boost as high as gamma=1300. Effects of the hyper…
▽ More
Laser driven plasma accelerators promise much shorter particle accelerators but their development requires detailed simulations that challenge or exceed current capabilities. We report the first direct simulations of stages up to 1 TeV from simulations using a Lorentz boosted calculation frame resulting in a million times speedup, thanks to a frame boost as high as gamma=1300. Effects of the hyperbolic rotation in Minkowski space resulting from the frame boost on the laser propagation in the plasma is shown to be key in the mitigation of a numerical instability that was limiting previous attempts.
△ Less
Submitted 3 November, 2010; v1 submitted 3 November, 2010;
originally announced November 2010.
-
Modeling laser wakefield accelerators in a Lorentz boosted frame
Authors:
J. -L. Vay,
C. G. R. Geddes,
E. Cormier-Michel,
D. P. Grote
Abstract:
Modeling of laser-plasma wakefield accelerators in an optimal frame of reference \cite{VayPRL07} is shown to produce orders of magnitude speed-up of calculations from first principles. Obtaining these speedups requires mitigation of a high-frequency instability that otherwise limits effectiveness in addition to solutions for handling data input and output in a relativistically boosted frame of ref…
▽ More
Modeling of laser-plasma wakefield accelerators in an optimal frame of reference \cite{VayPRL07} is shown to produce orders of magnitude speed-up of calculations from first principles. Obtaining these speedups requires mitigation of a high-frequency instability that otherwise limits effectiveness in addition to solutions for handling data input and output in a relativistically boosted frame of reference. The observed high-frequency instability is mitigated using methods including an electromagnetic solver with tunable coefficients, its extension to accomodate Perfectly Matched Layers and Friedman's damping algorithms, as well as an efficient large bandwidth digital filter. It is shown that choosing the frame of the wake as the frame of reference allows for higher levels of filtering and damping than is possible in other frames for the same accuracy. Detailed testing also revealed serendipitously the existence of a singular time step at which the instability level is minimized, independently of numerical dispersion, thus indicating that the observed instability may not be due primarily to Numerical Cerenkov as has been conjectured. The techniques developed for Cerenkov mitigation prove nonetheless to be very efficient at controlling the instability. Using these techniques, agreement at the percentage level is demonstrated between simulations using different frames of reference, with speedups reaching two orders of magnitude for a 0.1 GeV class stages. The method then allows direct and efficient full-scale modeling of deeply depleted laser-plasma stages of 10 GeV-1 TeV for the first time, verifying the scaling of plasma accelerators to very high energies. Over 4, 5 and 6 orders of magnitude speedup is achieved for the modeling of 10 GeV, 100 GeV and 1 TeV class stages, respectively.
△ Less
Submitted 14 September, 2010; v1 submitted 14 September, 2010;
originally announced September 2010.
-
Speeding up simulations of relativistic systems using an optimal boosted frame
Authors:
J. -L. Vay,
W. M. Fawley,
C. G. Geddes,
E. Cormier-Michel,
D. P. Grote
Abstract:
It can be computationally advantageous to perform computer simulations in a Lorentz boosted frame for a certain class of systems. However, even if the computer model relies on a covariant set of equations, it has been pointed out that algorithmic difficulties related to discretization errors may have to be overcome in order to take full advantage of the potential speedup. We summarize the findin…
▽ More
It can be computationally advantageous to perform computer simulations in a Lorentz boosted frame for a certain class of systems. However, even if the computer model relies on a covariant set of equations, it has been pointed out that algorithmic difficulties related to discretization errors may have to be overcome in order to take full advantage of the potential speedup. We summarize the findings, the difficulties and their solutions, and show that the technique enables simulations important to several areas of accelerator physics that are otherwise problematic, including self-consistent modeling in three-dimensions of laser wakefield accelerator stages at energies of 10 GeV and above.
△ Less
Submitted 30 September, 2009;
originally announced September 2009.