Electron-beam-induced modification of gold microparticles in an SEM
Authors:
Kristina Weinel,
Marc Benjamin Hahn,
Axel Lubk,
Wen Feng,
Ignacio Gonzalez Martinez,
Bernd Büchner,
Leonardo Agudo Jácome
Abstract:
Electron-beam-induced conversion of materials in a transmission electron microscope uses the high power density of a localized electron beam of acceleration voltages above 100 kV as an energy source to transform matter at the sub-micron scale. Here, the e-beam-induced transformation of precursor microparticles employing a low-energy e-beam with an acceleration voltage of 30 kV in a scanning electr…
▽ More
Electron-beam-induced conversion of materials in a transmission electron microscope uses the high power density of a localized electron beam of acceleration voltages above 100 kV as an energy source to transform matter at the sub-micron scale. Here, the e-beam-induced transformation of precursor microparticles employing a low-energy e-beam with an acceleration voltage of 30 kV in a scanning electron microscope is developed to increase the versatility and efficiency of the technique. Under these conditions, the technique can be classified between e-beam lithography, where the e-beam is used to mill holes in or grow some different material onto a substrate, and e-beam welding, where matter can be welded together when overcoming the melting phase. Modifying gold microparticles on an amorphous SiOx substrate reveals the dominant role of inelastic electron-matter interaction and subsequent localized heating for the observed melting and vaporization of the precursor microparticles under the electron beam. Monte-Carlo scattering simulations and thermodynamic modeling further support the findings.
△ Less
Submitted 5 August, 2024;
originally announced August 2024.
Tunable graphene phononic crystal
Authors:
Jan N. Kirchhof,
Kristina Weinel,
Sebastian Heeg,
Victor Deinhart,
Sviatoslav Kovalchuk,
Katja Hoeflich,
Kirill I. Bolotin
Abstract:
In the field of phononics, periodic patterning controls vibrations and thereby the flow of heat and sound in matter. Bandgaps arising in such phononic crystals realize low-dissipation vibrational modes and enable applications towards mechanical qubits, efficient waveguides, and state-of-the-art sensing. Here, we combine phononics and two-dimensional materials and explore the possibility of manipul…
▽ More
In the field of phononics, periodic patterning controls vibrations and thereby the flow of heat and sound in matter. Bandgaps arising in such phononic crystals realize low-dissipation vibrational modes and enable applications towards mechanical qubits, efficient waveguides, and state-of-the-art sensing. Here, we combine phononics and two-dimensional materials and explore the possibility of manipulating phononic crystals via applied mechanical pressure. To this end, we fabricate the thinnest possible phononic crystal from monolayer graphene and simulate its vibrational properties. We find a bandgap in the MHz regime, within which we localize a defect mode with a small effective mass of 0.72 ag = 0.002 $m_{physical}$. Finally, we take advantage of graphene's flexibility and mechanically tune a finite size phononic crystal. Under electrostatic pressure up to 30 kPa, we observe an upshift in frequency of the entire phononic system by more than 350%. At the same time, the defect mode stays within the bandgap and remains localized, suggesting a high-quality, dynamically tunable mechanical system.
△ Less
Submitted 25 February, 2021; v1 submitted 30 November, 2020;
originally announced November 2020.