Showing 1–31 of 31 results for author: Bloser, P F

CubeSats for Gamma-Ray Astronomy

Authors: Peter F. Bloser, David Murphy, Fabrizio Fiore, Jeremy Perkins

Abstract: After many years of flying in space primarily for educational purposes, CubeSats - tiny satellites with form factors corresponding to arrangements of "1U" units, or cubes, each 10 cm on a side - have come into their own as valuable platforms for technology advancement and scientific investigations. CubeSats offer comparatively rapid, low-cost access to space for payloads that be built, tested, and… ▽ More After many years of flying in space primarily for educational purposes, CubeSats - tiny satellites with form factors corresponding to arrangements of "1U" units, or cubes, each 10 cm on a side - have come into their own as valuable platforms for technology advancement and scientific investigations. CubeSats offer comparatively rapid, low-cost access to space for payloads that be built, tested, and operated by relatively small teams, with substantial contributions from students and early career researchers. Continuing advances in compact, low-power detectors, readout electronics, and flight computers have now enabled X-ray and gamma-ray sensing payloads that can fit within the constraints of CubeSat missions, permitting in-orbit demonstrations of new techniques and innovative high-energy astronomy observations. Gamma-ray-sensing CubeSats are certain to make an important contribution in the new era of multi-messenger, time-domain astronomy by detecting and localizing bright transients such as gamma-ray bursts, solar flares, and terrestrial gamma-ray flashes; however, other astrophysical science areas requiring long observations in a low-background environment, including gamma-ray polarimetry, studies of nuclear lines, and measurement of diffuse backgrounds, will likely benefit as well. We present the primary benefits of CubeSats for high-energy astronomy, highlight the scientific areas currently or soon to be studied, and review the missions that are currently operating, under development, or proposed. A rich portfolio of CubeSats for gamma-ray astronomy already exists, and the potential for a broad range of creative and scientifically productive missions in the near future is very high. △ Less

Submitted 21 December, 2022; originally announced December 2022.

Comments: Book chapter for the "Handbook of X-ray and Gamma-ray Astrophysics", Section "Optics and Detectors for Gamma-ray Astrophysics" (Editors in chief: C. Bambi and A. Santangelo, Springer Singapore). 33 pages, 11 figures

Report number: LA-UR-22-30861

Ex Luna, Scientia: The Lunar Occultation eXplorer (LOX)

Authors: R. S. Miller, M. Ajello, J. F. Beacom, P. F. Bloser, A. Burrows, C. L. Fryer, J. O. Goldsten, D. H. Hartmann, P. Hoeflich, A. Hungerford, D. J. Lawrence, M. D. Leising, P. Milne, P. N. Peplowski, F. Shiraz, T. Sukhbold, L. -S. The, Z. Yokley, C. A. Young

Abstract: LOX is a lunar-orbiting astrophysics mission that will probe the cosmos at MeV energies. It is guided by open questions regarding thermonuclear, or Type-Ia, supernovae (SNeIa) and will characterize these inherently radioactive objects by enabling a systematic survey of SNeIa at gamma-ray energies for the first time. Astronomical investigations from lunar orbit afford new opportunities to advance o… ▽ More LOX is a lunar-orbiting astrophysics mission that will probe the cosmos at MeV energies. It is guided by open questions regarding thermonuclear, or Type-Ia, supernovae (SNeIa) and will characterize these inherently radioactive objects by enabling a systematic survey of SNeIa at gamma-ray energies for the first time. Astronomical investigations from lunar orbit afford new opportunities to advance our understanding of the cosmos. The foundation of LOX is an observational approach well suited to the all-sky monitoring demands of supernova investigations and time-domain astronomy. Its inherently wide field-of-view and continuous all-sky monitoring provides an innovative way of addressing decadal survey questions at MeV energies (0.1-10 MeV). The LOX approach achieves high sensitivity with a simple, high-heritage instrument design that eliminates the need for complex, position-sensitive detectors, kinematic event reconstruction, masks, or other insensitive detector mass, while also mitigating technology development, implementation complexity, and their associated costs. LOX can be realized within existing programs, like Explorer. △ Less

Submitted 16 July, 2019; originally announced July 2019.

Comments: Astro2020 APC White Paper, Submitted to the National Academy of Sciences Decadal Survey on Astronomy and Astrophysics (Astro2020); 15 pages

Gamma-rays from kilonova: a potential probe of r-process nucleosynthesis

Authors: Oleg Korobkin, Aimee M. Hungerford, Christopher L. Fryer, Matthew R. Mumpower, G. Wendell Misch, Trevor M. Sprouse, Jonas Lippuner, Rebecca Surman, Aaron J. Couture, Peter F. Bloser, Farzane Shirazi, Wesley P. Even, W. Thomas Vestrand, Richard S. Miller

Abstract: The mergers of compact binaries with at least one neutron star component are the potential leading sites of the production and ejection of $r$-process elements. Discoveries of galactic binary pulsars, short gamma-ray bursts, and gravitational-wave detections have all been constraining the rate of these events, while the gravitational wave plus broadband electromagnetic coverage of binary neutron s… ▽ More The mergers of compact binaries with at least one neutron star component are the potential leading sites of the production and ejection of $r$-process elements. Discoveries of galactic binary pulsars, short gamma-ray bursts, and gravitational-wave detections have all been constraining the rate of these events, while the gravitational wave plus broadband electromagnetic coverage of binary neutron star merger (GW170817) has also placed constraints on the properties (mass and composition) of the merger ejecta. But uncertainties and ambiguities in modeling the optical and infrared emission make it difficult to definitively measure the distribution of heavy isotopes in these mergers. In contrast, gamma rays emitted in the decay of these neutron-rich ejecta may provide a more direct measurement of the yields. We calculate the gamma production in remnants of neutron star mergers, considering two epochs: a kilonova epoch, lasting about two weeks, and a much later epoch of tens and hundreds of thousands of years after the merger. For the kilonova epoch, when the expanding ejecta is still only partially transparent to gamma radiation, we use 3D radiative transport simulations to produce the spectra. We show that the gamma-ray spectra associated with beta- and alpha-decay provide a fingerprint of the ejecta properties and, for a sufficiently nearby remnant, may be detectable, even for old remnants. We compare our gamma spectra with the potential detection limits of next generation detectors, including the Lunar Occultation Explorer (LOX), the All-sky Medium Energy Gamma-ray Observatory (AMEGO), and the Compton Spectrometer and Imager (COSI). We show that fission models can be discriminated via the presence of short-lived fission fragments in the remnant spectra. △ Less

Submitted 9 April, 2020; v1 submitted 13 May, 2019; originally announced May 2019.

Comments: 14 pages, 11 figures

Report number: LA-UR-19-24338

Journal ref: The Astrophysical Journal, Volume 889, Issue 2, id.168, 2020

Balloon Flight Test of a Compton Telescope Based on Scintillators with Silicon Photomultiplier Readouts

Authors: P. F. Bloser, J. S. Legere, C. M. Bancroft, J. M. Ryan, M. L. McConnell

Abstract: We present the results of the first high-altitude balloon flight test of a concept for an advanced Compton telescope making use of modern scintillator materials with silicon photomultiplier (SiPM) readouts. There is a need in the fields of high-energy astronomy and solar physics for new medium-energy gamma-ray (~0.4 - 10 MeV) detectors capable of making sensitive observations. A fast scintillator-… ▽ More We present the results of the first high-altitude balloon flight test of a concept for an advanced Compton telescope making use of modern scintillator materials with silicon photomultiplier (SiPM) readouts. There is a need in the fields of high-energy astronomy and solar physics for new medium-energy gamma-ray (~0.4 - 10 MeV) detectors capable of making sensitive observations. A fast scintillator- based Compton telescope with SiPM readouts is a promising solution to this instrumentation challenge, since the fast response of the scintillators permits the rejection of background via time-of-flight (ToF) discrimination. The Solar Compton Telescope (SolCompT) prototype was designed to demonstrate stable performance of this technology under balloon-flight conditions. The SolCompT instrument was a simple two-element Compton telescope, consisting of an approximately one-inch cylindrical stilbene crystal for a scattering detector and a one-inch cubic LaBr3:Ce crystal for a calorimeter detector. Both scintillator detectors were read out by 2 x 2 arrays of Hamamatsu S11828-3344 MPPC devices. Custom front-end electronics provided optimum signal rise time and linearity, and custom power supplies automatically adjusted the SiPM bias voltage to compensate for temperature-induced gain variations. A tagged calibration source, consisting of ~240 nCi of Co-60 embedded in plastic scintillator, was placed in the field of view and provided a known source of gamma rays to measure in flight. The SolCompT balloon payload was launched on 24 August 2014 from Fort Sumner, NM, and spent ~3.75 hours at a float altitude of ~123,000 feet. The instrument performed well throughout the flight. After correcting for small (~10%) residual gain variations, we measured an in-flight ToF resolution of ~760 ps (FWHM). Advanced scintillators with SiPM readouts continue to show great promise for future gamma-ray instruments. △ Less

Submitted 24 February, 2016; originally announced February 2016.

Comments: 39 pages, 25 figures, to appear in NIM-A

Journal ref: Nuclear Instruments and Methods in Physics Research A, 812 (2016) 92

A Pair Production Telescope for Medium-Energy Gamma-Ray Polarimetry

Authors: Stanley D. Hunter, Peter F. Bloser, Gerardo O. Depaola, Michael P. Dion, Georgia A. DeNolfo, A. R. Hanu, M. L. Iparraguirre, Jason Legere, Mark L. McConnell, Suzanne F. Nowicki, James M. Ryan, Seunghee Son, Floyd W. Stecker

Abstract: We describe the science motivation and development of a pair production telescope for medium-energy gamma-ray polarimetry. Our instrument concept, the Advanced Energetic Pair Telescope (AdEPT), takes advantage of the Three-Dimensional Track Imager, a low-density gaseous time projection chamber, to achieve angular resolution within a factor of two of the pair production kinematics limit (~0.6 deg a… ▽ More We describe the science motivation and development of a pair production telescope for medium-energy gamma-ray polarimetry. Our instrument concept, the Advanced Energetic Pair Telescope (AdEPT), takes advantage of the Three-Dimensional Track Imager, a low-density gaseous time projection chamber, to achieve angular resolution within a factor of two of the pair production kinematics limit (~0.6 deg at 70 MeV), continuum sensitivity comparable with the Fermi-LAT front detector (<3x10-6 MeV cm-2 s-1 at 70 MeV), and minimum detectable polarization less than 10% for a 10 millicrab source in 106 seconds. △ Less

Submitted 8 April, 2014; v1 submitted 8 November, 2013; originally announced November 2013.

Comments: Version to be published in Astroparticle Physics, 32 pages, 11 figures

Statistical Properties of Gamma-Ray Burst Polarization

Authors: Kenji Toma, Takanori Sakamoto, Bing Zhang, Joanne E. Hill, Mark L. McConnell, Peter F. Bloser, Ryo Yamazaki, Kunihito Ioka, Takashi Nakamura

Abstract: The emission mechanism and the origin and structure of magnetic fields in gamma-ray burst (GRB) jets are among the most important open questions concerning the nature of the central engine of GRBs. In spite of extensive observational efforts, these questions remain to be answered and are difficult or even impossible to infer with the spectral and lightcurve information currently collected. Polar… ▽ More The emission mechanism and the origin and structure of magnetic fields in gamma-ray burst (GRB) jets are among the most important open questions concerning the nature of the central engine of GRBs. In spite of extensive observational efforts, these questions remain to be answered and are difficult or even impossible to infer with the spectral and lightcurve information currently collected. Polarization measurements will lead to unambiguous answers to several of these questions. Recent developments in X-ray and gamma-ray polarimetry techniques have demonstrated a significant increase in sensitivity enabling several new mission concepts, e.g. POET (Polarimeters for Energetic Transients), providing wide field of view and broadband polarimetry measurements. If launched, missions of this kind would finally provide definitive measurements of GRB polarizations. We perform Monte Carlo simulations to derive the distribution of GRB polarizations in three emission models; the synchrotron model with a globally ordered magnetic field (SO model), the synchrotron model with a locally random magnetic field (SR model), and the Compton drag model (CD model). The results show that POET, or other polarimeters with similar capabilities, can constrain the GRB emission models by using the statistical properties of GRB polarizations. In particular, the ratio of the number of GRBs for which the polarization degrees can be measured to the number of GRBs that are detected (N_m/N_d) and the distributions of the polarization degrees (Pi) can be used as the criteria. If N_m/N_d > 30% and Pi is clustered between 0.2 and 0.7, the SO model will be favored. If instead N_m/N_d < 15%, then the SR or CD model will be favored. If several events with Pi > 0.8 are observed, then the CD model will be favored. △ Less

Submitted 16 April, 2009; v1 submitted 12 December, 2008; originally announced December 2008.

Comments: Replaced with accepted version in ApJ. A few minor changes done. References added

Report number: KEK-TH-1405, KEK-Cosmo-17

Journal ref: Astrophys.J.698:1042-1053,2009

Calibration of the Gamma-RAy Polarimeter Experiment (GRAPE) at a Polarized Hard X-Ray Beam

Authors: P. F. Bloser, J. S. Legere, M. L. McConnell, J. R. Macri, C. M. Bancroft, T. P. Connor, J. M. Ryan

Abstract: The Gamma-RAy Polarimeter Experiment (GRAPE) is a concept for an astronomical hard X-ray Compton polarimeter operating in the 50 - 500 keV energy band. The instrument has been optimized for wide-field polarization measurements of transient outbursts from energetic astrophysical objects such as gamma-ray bursts and solar flares. The GRAPE instrument is composed of identical modules, each of which… ▽ More The Gamma-RAy Polarimeter Experiment (GRAPE) is a concept for an astronomical hard X-ray Compton polarimeter operating in the 50 - 500 keV energy band. The instrument has been optimized for wide-field polarization measurements of transient outbursts from energetic astrophysical objects such as gamma-ray bursts and solar flares. The GRAPE instrument is composed of identical modules, each of which consists of an array of scintillator elements read out by a multi-anode photomultiplier tube (MAPMT). Incident photons Compton scatter in plastic scintillator elements and are subsequently absorbed in inorganic scintillator elements; a net polarization signal is revealed by a characteristic asymmetry in the azimuthal scattering angles. We have constructed a prototype GRAPE module containing a single CsI(Na) calorimeter element, at the center of the MAPMT, surrounded by 60 plastic elements. The prototype has been combined with custom readout electronics and software to create a complete "engineering model" of the GRAPE instrument. This engineering model has been calibrated using a nearly 100% polarized hard X-ray beam at the Advanced Photon Source at Argonne National Laboratory. We find modulation factors of 0.46 +/- 0.06 and 0.48 +/- 0.03 at 69.5 keV and 129.5 keV, respectively, in good agreement with Monte Carlo simulations. In this paper we present details of the beam test, data analysis, and simulations, and discuss the implications of our results for the further development of the GRAPE concept. △ Less

Submitted 3 December, 2008; originally announced December 2008.

Comments: 35 pages, 14 figures, accepted for publication in NIM-A

Status and Future Prospects for Gamma-Ray Polarimetry

Authors: M. L. McConnell, P. F. Bloser

Abstract: The recent detection of linear polarization from GRB120206 has piqued the interest of the community in this relatively unexplored avenue of research. Here, we review the current status and prospects for GRB polarimetry at hard X-ray and soft gamma-ray energies. After reviewing the most recent results, we present a brief survey of current and planned experiments that are capable of making GRB pol… ▽ More The recent detection of linear polarization from GRB120206 has piqued the interest of the community in this relatively unexplored avenue of research. Here, we review the current status and prospects for GRB polarimetry at hard X-ray and soft gamma-ray energies. After reviewing the most recent results, we present a brief survey of current and planned experiments that are capable of making GRB polarization measurements in the energy range between 30 keV and 30 MeV. △ Less

Submitted 14 August, 2005; originally announced August 2005.

Comments: 12 pages; paper presented at the FRASCATI Workshop 2005 on Multifrequency Behaviour of High Energy Cosmic Sources; submitted to Chinese Journal of Astronomy and Astrophysics

GRAPE - A Balloon-Borne Gamma-Ray Polarimeter Experiment

Authors: P. F. Bloser, J. S. Legere, J. R. Macri, M. L. McConnell, T. Narita, J. M. Ryan

Abstract: This paper reviews the development status of GRAPE (the Gamma-Ray Polarimeter Experiment), a hard X-ray Compton Polarimeter. The purpose of GRAPE is to measure the polarization of hard X-rays in the 50-300 keV energy range. We are particularly interested in X-rays that are emitted from solar flares and gamma-ray bursts (GRBs), although GRAPE could also be employed in the study of other astrophys… ▽ More This paper reviews the development status of GRAPE (the Gamma-Ray Polarimeter Experiment), a hard X-ray Compton Polarimeter. The purpose of GRAPE is to measure the polarization of hard X-rays in the 50-300 keV energy range. We are particularly interested in X-rays that are emitted from solar flares and gamma-ray bursts (GRBs), although GRAPE could also be employed in the study of other astrophysical sources. Accurately measuring the polarization of the emitted radiation will lead to a better understating of both emission mechanisms and source geometries. The GRAPE design consists of an array of plastic scintillators surrounding a central high-Z crystal scintillator. The azimuthal distribution of photon scatters from the plastic array into the central calorimeter provides a measure of the polarization fraction and polarization angle of the incident radiation. The design of the detector provides sensitivity over a large field-of-view (>pi steradian). The design facilitates the fabrication of large area arrays with minimal deadspace. This paper presents the latest design concept and the most recent results from laboratory tests of a GRAPE science model. △ Less

Submitted 14 August, 2005; originally announced August 2005.

Comments: 6 pages; paper presented at the FRASCATI Workshop 2005 on Multifrequency Behaviour of High Energy Cosmic Sources; submitted to Chinese Journal of Astronomy and Astrophysics

CASTER - a concept for a Black Hole Finder Probe based on the use of new scintillator technologies

Authors: Mark L. McConnell, Peter F. Bloser, Gary Case, Michael Cherry, James Cravens, T. Gregory Guzik, Kevin Hurley, R. Marc Kippen, John Macri, Richard S. Miller, William Paciesas, James M. Ryan, Bradley Schaefer, J. Gregory Stacy, W. Thomas Vestrand, John P. Wefel

Abstract: The primary scientific mission of the Black Hole Finder Probe (BHFP), part of the NASA Beyond Einstein program, is to survey the local Universe for black holes over a wide range of mass and accretion rate. One approach to such a survey is a hard X-ray coded-aperture imaging mission operating in the 10--600 keV energy band, a spectral range that is considered to be especially useful in the detect… ▽ More The primary scientific mission of the Black Hole Finder Probe (BHFP), part of the NASA Beyond Einstein program, is to survey the local Universe for black holes over a wide range of mass and accretion rate. One approach to such a survey is a hard X-ray coded-aperture imaging mission operating in the 10--600 keV energy band, a spectral range that is considered to be especially useful in the detection of black hole sources. The development of new inorganic scintillator materials provides improved performance (for example, with regards to energy resolution and timing) that is well suited to the BHFP science requirements. Detection planes formed with these materials coupled with a new generation of readout devices represent a major advancement in the performance capabilities of scintillator-based gamma cameras. Here, we discuss the Coded Aperture Survey Telescope for Energetic Radiation (CASTER), a concept that represents a BHFP based on the use of the latest scintillator technology. △ Less

Submitted 14 August, 2005; originally announced August 2005.

Comments: 12 pages; conference paper presented at the SPIE conference "UV, X-Ray, and Gamma-Ray Space Instrumentation for Astronomy XIV." To be published in SPIE Conference Proceedings, vol. 5898

Pixelized Gas Micro-well Detectors for Advanced Gamma-ray Telescopes

Authors: P. F. Bloser, S. D. Hunter

Abstract: We describe possible applications of pixelized micro-well detectors (PMWDs) as three-dimensional charged particle trackers in advanced gamma-ray telescope concepts. A micro-well detector consists of an array of individual micro-patterned gas proportional counters opposite a planar drift electrode. When combined with pixelized thin film transistor (TFT) array readouts, large gas volumes may be im… ▽ More We describe possible applications of pixelized micro-well detectors (PMWDs) as three-dimensional charged particle trackers in advanced gamma-ray telescope concepts. A micro-well detector consists of an array of individual micro-patterned gas proportional counters opposite a planar drift electrode. When combined with pixelized thin film transistor (TFT) array readouts, large gas volumes may be imaged with very good spatial and energy resolution at reasonable cost. The third dimension is determined by timing the drift of the ionization electrons. The primary advantage of this technique is the very low scattering that the charged particles experience in a gas tracking volume, and the very accurate determination of the initial particle momenta that is thus achieved. We consider two applications of PMWDs to gamma-ray astronomy: 1) A tracker for an Advanced Compton Telescope (ACT) in which the recoil electron from the initial Compton scatter may be accurately tracked, greatly reducing the telescope's point spread function and increasing its polarization sensitivity; and 2) an Advanced Pair Telescope (APT) whose angular resolution is limited primarily by the nuclear recoil and which achieves useful polarization sensitivity near 100 MeV. We have performed Geant4 simulations of both these concepts to estimate their angular resolution and sensitivity for reasonable mission designs. △ Less

Submitted 14 May, 2004; originally announced May 2004.

Comments: 4 pages, 6 figures, to appear in Proc. 5th INTEGRAL Workshop (Munich, Feb 2004)

EXITE2 Observation of the SIGMA Source GRS 1227+025

Authors: J. E. Grindlay, P. F. Bloser, Y. Chou, T. Narita

Abstract: We report the EXITE2 hard X-ray imaging of the sky around 3C273. A 2h observation on May 8, 1997, shows a $\sim$260 mCrab source detected at $\sim4σ$ in each of two bands (50-70 and 70-93 keV) and located $\sim$30' from 3C273 and consistent in position with the SIGMA source GRS1227+025. The EXITE2 spectrum is consistent with a power law with photon index 3 and large low energy absorption, as ind… ▽ More We report the EXITE2 hard X-ray imaging of the sky around 3C273. A 2h observation on May 8, 1997, shows a $\sim$260 mCrab source detected at $\sim4σ$ in each of two bands (50-70 and 70-93 keV) and located $\sim$30' from 3C273 and consistent in position with the SIGMA source GRS1227+025. The EXITE2 spectrum is consistent with a power law with photon index 3 and large low energy absorption, as indicated by the GRANAT/SIGMA results. No source was detected in more sensitive followup EXITE2 observations in 2000 and 2001 with 3$σ$ upper limits of 190 and 65 mCrab, respectively. Comparison with the flux detected by SIGMA shows the source to be highly variable, suggesting it may be non-thermal and beamed and thus the first example of a ``type 2'' (absorbed) Blazar. Alternatively it might be (an unprecedented) very highly absorbed binary system undergoing accretion disk instability outbursts, possibly either a magnetic CV, or a black hole X-ray nova. △ Less

Submitted 5 February, 2004; originally announced February 2004.

Comments: 12 pages, 4 figures, accepted for publication in ApJ

Journal ref: Astrophys.J. 618 (2005) 852-855

Applications of Gas Imaging Micro-Well Detectors to an Advanced Compton Telescope

Authors: P. F. Bloser, S. D. Hunter, J. M. Ryan, M. L. McConnell, R. S. Miller, T. N. Jackson, B. Bai, S. Jung

Abstract: We present a concept for an Advanced Compton Telescope (ACT) based on the use of pixelized gas micro-well detectors to form a three-dimensional electron track imager. A micro-well detector consists of an array of individual micro-patterned proportional counters opposite a planar drift electrode. When combined with thin film transistor array readouts, large gas volumes may be imaged with very goo… ▽ More We present a concept for an Advanced Compton Telescope (ACT) based on the use of pixelized gas micro-well detectors to form a three-dimensional electron track imager. A micro-well detector consists of an array of individual micro-patterned proportional counters opposite a planar drift electrode. When combined with thin film transistor array readouts, large gas volumes may be imaged with very good spatial and energy resolution at reasonable cost. The third dimension is determined from the drift time of the ionization electrons. The primary advantage of this approach is the excellent tracking of the Compton recoil electron that is possible in a gas volume. Such good electron tracking allows us to reduce the point spread function of a single incident photon dramatically, greatly improving the imaging capability and sensitivity. The polarization sensitivity, which relies on events with large Compton scattering angles, is particularly enhanced. We describe a possible ACT implementation of this technique, in which the gas tracking volume is surrounded by a CsI calorimeter, and present our plans to build and test a small prototype over the next three years. △ Less

Submitted 26 September, 2003; originally announced September 2003.

Comments: 7 pages, 6 figures, to appear in New Astronomy Reviews (proceedings of the Seeon Conference "Astronomy with Radioactivities IV and Filling the Sensitivity Gap in MeV Astronomy")

Journal ref: New Astron.Rev.48:299-303,2004

A Concept for a High-Energy Gamma-ray Polarimeter

Authors: P. F. Bloser, S. D. Hunter, G. O. Depaola, F. Longo

Abstract: We present a concept for an imaging gamma-ray polarimeter operating from ~50 MeV to ~1 GeV. Such an instrument would be valuable for the study of high-energy pulsars, active galactic nuclei, supernova remnants, and gamma-ray bursts. The concept makes use of pixelized gas micro-well detectors, under development at Goddard Space Flight Center, to record the electron-positron tracks from pair-produ… ▽ More We present a concept for an imaging gamma-ray polarimeter operating from ~50 MeV to ~1 GeV. Such an instrument would be valuable for the study of high-energy pulsars, active galactic nuclei, supernova remnants, and gamma-ray bursts. The concept makes use of pixelized gas micro-well detectors, under development at Goddard Space Flight Center, to record the electron-positron tracks from pair-production events in a large gas volume. Pixelized micro-well detectors have the potential to form large-volume 3-D track imagers with ~100 micron (rms) position resolution at moderate cost. The combination of high spatial resolution and a continuous low-density gas medium permits many thousands of measurements per radiation length, allowing the particle tracks to be imaged accurately before multiple scattering masks their original directions. The polarization of the incoming radiation may then be determined from the azimuthal distribution of the electron-positron pairs. We have performed Geant4 simulations of these processes to estimate the polarization sensitivity of a simple telescope geometry at 100 MeV. △ Less

Submitted 19 August, 2003; originally announced August 2003.

Comments: 12 pages, 10 figures, to appear in Proc. SPIE 5165, "X-Ray and Gamma-Ray Instrumentation for Astronomy XIII"

X-ray Dip Monitoring of XB 1916-053

Authors: T. Narita, J. E. Grindlay, P. F. Bloser, Y. Chou

Abstract: We report on the long term monitoring of X-ray dips from the ultracompact low-mass X-ray binary (LMXB) XB 1916-053. Roughly one-month interval observations were carried out with the Rossi X-ray Timing Explorer (RXTE) during 1996, during which the source varied between dim, hard states and more luminous, soft states. The dip spectra and dip lightcurves were compared against both the broadband lum… ▽ More We report on the long term monitoring of X-ray dips from the ultracompact low-mass X-ray binary (LMXB) XB 1916-053. Roughly one-month interval observations were carried out with the Rossi X-ray Timing Explorer (RXTE) during 1996, during which the source varied between dim, hard states and more luminous, soft states. The dip spectra and dip lightcurves were compared against both the broadband luminosity and the derived mass accretion rate Mdot. The dips spectra could be fitted by an absorbed blackbody plus cut-off power law non-dip spectral model, with additional absorption ranging from 0 to >100 x 10^22 cm^-2. The amount of additional blackbody absorption was found to vary with the source luminosity. Our results are consistent with an obscuration of the inner disk region by a partially ionized outer disk. The size of the corona, derived from the dip ingress times, was found to be ~10^9 cm. The corona size did not correlate with the coronal temperature, but seemed to increase when \Mdot also increased. We discuss our findings in the context of an evaporated accretion disk corona model and an ADAF-type model. △ Less

Submitted 6 May, 2003; originally announced May 2003.

Comments: Accepted for publication in ApJ, 15 pages

Journal ref: Astrophys.J. 593 (2003) 1007-1012

Development of Silicon Strip Detectors for a Medium Energy Gamma-ray Telescope

Authors: P. F. Bloser, F. Schopper, R. Andritschke, G. Kanbach, A. Zoglauer, P. Lechner

Abstract: We report on the design, production, and testing of advanced double-sided silicon strip detectors under development at the Max-Planck-Institute as part of the Medium Energy Gamma-ray Astronomy (MEGA) project. The detectors are designed to form a stack, the "tracker," with the goal of recording the paths of energetic electrons produced by Compton-scatter and pair-production interactions. Each lay… ▽ More We report on the design, production, and testing of advanced double-sided silicon strip detectors under development at the Max-Planck-Institute as part of the Medium Energy Gamma-ray Astronomy (MEGA) project. The detectors are designed to form a stack, the "tracker," with the goal of recording the paths of energetic electrons produced by Compton-scatter and pair-production interactions. Each layer of the tracker is composed of a 3 x 3 array of 500 micron thick silicon wafers, each 6 cm x 6 cm and fitted with 128 orthogonal p and n strips on opposite sides (470 micron pitch). The strips are biased using the punch-through principle and AC-coupled via metal strips separated from the strip implant by an insulating oxide/nitride layer. The strips from adjacent wafers in the 3 x 3 array are wire-bonded in series and read out by 128-channel TA1.1 ASICs, creating a total 19 cm x 19 cm position-sensitive area. At 20 degrees C a typical energy resolution of 15-20 keV FWHM, a position resolution of 290 microns, and a time resolution of ~1 microsec is observed. △ Less

Submitted 24 February, 2003; originally announced February 2003.

Comments: 9 pages, 13 figures, to appear in NIM-A (Proceedings of the 9th European Symposium on Semiconductor Detectors)

Journal ref: Nucl.Instrum.Meth. A512 (2003) 220-228

Background Measurements from Balloon-Borne CZT Detectors

Authors: Johnathan A Jenkins, Tomohiko Narita, Jonathan E. Grindlay, Peter F. Bloser, Carl Stahle, Brad Parker, Scott Barthelmy

Abstract: We report detector characteristics and background measurements from two prototype imaging CZT detectors flown on a scientific balloon payload in May 2001. The detectors are both platinum-contact 10mm x 10mm x 5mm CZT crystals, each with a 4 $\times$ 4 array of pixels tiling the anode. One is made from IMARAD horizontal Bridgman CZT, the other from eV Products high-pressure Bridgman material. Bot… ▽ More We report detector characteristics and background measurements from two prototype imaging CZT detectors flown on a scientific balloon payload in May 2001. The detectors are both platinum-contact 10mm x 10mm x 5mm CZT crystals, each with a 4 $\times$ 4 array of pixels tiling the anode. One is made from IMARAD horizontal Bridgman CZT, the other from eV Products high-pressure Bridgman material. Both detectors were mounted side-by-side in a flip-chip configuration and read out by a 32-channel IDE VA/TA ASIC preamp/shaper. We enclosed the detectors in the same 40deg field-of-view collimator (comprisinga graded passive shield and plastic scintillator) used in our previously-reported September 2000 flight. I-V curves for the detectors are diode-like, and we find that the platinum contacts adhere significantly better to the CZT surfaces than gold to previous detectors. The detectors and instrumentation performed well in a 20-hour balloon flight on 23/24 May 2001. Although we discovered a significant instrumental background component in flight, it was possible to measure and subtract this component from the spectra. The resulting IMARAD detector background spectrum (from 30 keV to ~450 keV) reaches ~5 x 10^{-3}$ counts/cm^2 -sec-keV at 100 keV and has a power-law index of ~2 at high energies. The eV Products detector has a similar spectrum, although there is more uncertainty in the energy scale because of calibration complications. △ Less

Submitted 3 December, 2002; v1 submitted 24 November, 2002; originally announced November 2002.

Comments: 9 pages, 7 figures (in 8 files). Presented at SPIE, Aug. 2002. To appear in Proc. SPIE, volume 4851. Errors in references and typos in text fixed

The MEGA Advanced Compton Telescope Project

Authors: P. F. Bloser, R. Andritschke, G. Kanbach, V. Schoenfelder, F. Schopper, A. Zoglauer

Abstract: The goal of the Medium Energy Gamma-ray Astronomy (MEGA) telescope is to improve sensitivity at medium gamma-ray energies (0.4-50 MeV) by at least an order of magnitude over that of COMPTEL. This will be achieved with a new compact design that allows for a very wide field of view, permitting a sensitive all-sky survey and the monitoring of transient and variable sources. The key science objectiv… ▽ More The goal of the Medium Energy Gamma-ray Astronomy (MEGA) telescope is to improve sensitivity at medium gamma-ray energies (0.4-50 MeV) by at least an order of magnitude over that of COMPTEL. This will be achieved with a new compact design that allows for a very wide field of view, permitting a sensitive all-sky survey and the monitoring of transient and variable sources. The key science objectives for MEGA include the investigation of cosmic high-energy particle accelerators, studies of nucleosynthesis sites using gamma-ray lines, and determination of the large-scale structure of galactic and cosmic diffuse background emission. MEGA records and images gamma-ray events by completely tracking both Compton and pair creation interactions in a tracker of double-sided silicon strip detectors and a calorimeter of CsI crystals able to resolve in three dimensions. We present initial laboratory calibration results from a small prototype MEGA telescope. △ Less

Submitted 5 October, 2001; originally announced October 2001.

Comments: 7 pages LaTeX, 5 figures, to appear in New Astronomy Reviews (Proceedings of the Ringberg Workshop "Astronomy with Radioactivities III")

Journal ref: New Astron.Rev. 46 (2002) 611-616

Balloon Flight Background Measurement with Actively-Shielded Planar and Imaging CZT Detectors

Authors: P. F. Bloser, T. Narita, J. A. Jenkins, M. Perrin, R. Murray, J. E. Grindlay

Abstract: We present results from the flight of two prototype CZT detectors on a scientific balloon payload in September 2000. The first detector, referred to as ``CZT1,'' consisted of a 10 mm x 10 mm x 2 mm CZT crystal with a single gold planar electrode readout. This detector was shielded by a combination of a passive collimator surrounded by plastic scintillator and a thick BGO crystal in the rear. The… ▽ More We present results from the flight of two prototype CZT detectors on a scientific balloon payload in September 2000. The first detector, referred to as ``CZT1,'' consisted of a 10 mm x 10 mm x 2 mm CZT crystal with a single gold planar electrode readout. This detector was shielded by a combination of a passive collimator surrounded by plastic scintillator and a thick BGO crystal in the rear. The second detector, ``CZT2,'' comprised two 10 mm x 10 mm x 5 mm CZT crystals, one made of eV Products high pressure Bridgman material and the other of IMARAD horizontal Bridgman material, each fashioned with a 4 x 4 array of gold pixels on a 2.5 mm pitch. The pixellated detectors were flip-chip-mounted side by side and read out by a 32-channel ASIC. This detector was also shielded by a passive/plastic collimator in the front, but used only additional passive/plastic shielding in the rear. Both experiments were flown from Ft. Sumner, NM on September 19, 2000 on a 24 hour balloon flight. CZT1 recorded a non-vetoed background level at 100 keV of ~1e-3 cts/cm2/s/keV. Raising the BGO threshold from 50 keV to ~1 MeV produced only an 18% increase in this level. CZT2 recorded a background at 100 keV of ~4e-3 cts/cm2/s/keV in the eV Products detector and ~6e-3 cts/cm2/s/keV in the IMARAD detector. Both CZT1 and CZT2 spectra were in basic agreement with Monte Carlo simulations, though both recorded systematically higher count rates at high energy than predicted. No lines were observed, indicating that neutron capture reactions, at least those producing decay lines at a few 100 keV, are not significant components of the CZT background. Comparison of the CZT1 and CZT2 spectra indicates that passive/plastic shielding may provide adequately low background levels for many applications. △ Less

Submitted 3 October, 2001; originally announced October 2001.

Comments: 12 pages LaTeX, 8 figures, to appear in Proc. SPIE 4497, "X-Ray and Gamma-Ray Instrumentation for Astronomy XII"

Development of an XSPEC-Based Spectral Analysis System for the Coded-Aperture Hard X-ray Balloon Payload EXITE2

Authors: P. F. Bloser, Y. Chou, J. E. Grindlay, T. Narita, G. Monnelly

Abstract: We present the spectral analysis system for the second-generation Energetic X-ray Imaging Telescope Experiment (EXITE2) balloon payload. EXITE2 is an imaging hard X-ray telescope using a coded-aperture mask and a NaI/CsI phoswich detector operating in the energy range 20--600 keV. The instrument was flown on a high-altitude scientific balloon from Ft. Sumner, NM on 1997 May 7-8. We describe the… ▽ More We present the spectral analysis system for the second-generation Energetic X-ray Imaging Telescope Experiment (EXITE2) balloon payload. EXITE2 is an imaging hard X-ray telescope using a coded-aperture mask and a NaI/CsI phoswich detector operating in the energy range 20--600 keV. The instrument was flown on a high-altitude scientific balloon from Ft. Sumner, NM on 1997 May 7-8. We describe the details of the EXITE2 spectral analysis system, with emphasis on those aspects peculiar to coded-aperture instruments. In particular, we have made our analysis compatible with the standard X-ray spectral fitting package XSPEC by generating a response matrix in the appropriate format including all the effects of a coded-aperture system. The use of XSPEC, which may be a first for coded-aperture data, permits great flexibility in the fitting of spectral models. The additional effects of our phoswich system, or any other detector-specific considerations, may be easily included as well. We test our spectral analysis using observations of the Crab Nebula, and find that the EXITE2 Crab spectrum is consistent with those recorded by previous instruments operating in this energy range. △ Less

Submitted 7 September, 2001; originally announced September 2001.

Comments: 17 pages LaTeX, 6 figures, accepted to Astroparticle Physics

Timing Analysis of the Light Curve of the Dipping-Bursting X-ray Binary X1916-053

Authors: Y. Chou, J. E. Grindlay, P. F. Bloser

Abstract: We present the timing analysis results for our observations of the x-ray dip source X1916-053 conducted with RXTE between February and October of 1996. Our goal was to finally measure the binary period - as either the x-ray dip period or ~1% longer optical modulation period, thereby establishing if the binary has a precessing disk (SU UMa model) or a third star (triple model). Combined with hist… ▽ More We present the timing analysis results for our observations of the x-ray dip source X1916-053 conducted with RXTE between February and October of 1996. Our goal was to finally measure the binary period - as either the x-ray dip period or ~1% longer optical modulation period, thereby establishing if the binary has a precessing disk (SU UMa model) or a third star (triple model). Combined with historical data (1979-96), the x-ray dip period is measured to be 3000.6508 $\pm$ 0.0009 sec with a 2$σ$ upper limit $|\dot P| \leq 2.06 \times 10^{-11}$. From our quasi-simultaneous optical observations (May 14-23, 1996) and historical data (1987-96), we measure the optical modulation period to be 3027.5510 $\pm$ 0.0052 sec with a 2$σ$ upper limit $|\dot P| \leq 2.28 \times 10^{-10}$. The two periods are therefore each stable (over all recorded data) and require a $3.9087 \pm 0.0008$d beat period. This beat period, and several of its harmonics is also observed as variations in the dip shape. Phase modulation of x-ray dips, observed in a 10 consecutive day observation, is highly correlated with the $\sim$3.9d dip shape modulation. The 1987-1996 optical observations show that the optical phase fluctuations are a factor of 3 larger than those in the x-ray. We discuss SU UMa vs. triple models to describe the X1916-053 light curve behavior and conclude that the x-ray dip period, with smaller phase jitter, is probably the binary period so that the required precession is most likely similar to that observed in SU UMa and x-ray nova systems. However the ``precession'' period stability and especially the fact that the times of x-ray bursts may partially cluster to occur just after x-ray dips, continue to suggest that this system may be a hierarchical triple. △ Less

Submitted 24 October, 2000; v1 submitted 23 October, 2000; originally announced October 2000.

Comments: 33 pages, 13 figures, accepted by ApJ

Construction and Testing of a Pixellated CZT Detector and Shield for a Hard X-ray Astronomy Balloon Flight

Authors: P. F. Bloser, T. Narita, J. A. Jenkins, J. E. Grindlay

Abstract: We report on the construction and laboratory testing of pixellated CZT detectors mounted in a flip-chip, tiled fashion and read out by an ASIC, as required for proposed hard X-ray astronomy missions. Two 10 mm x 10 mm x 5 mm detectors were fabricated, one out of standard eV Products high-pressure Bridgman CZT and one out of IMARAD horizontal Bridgman CZT. Each was fashioned with a 4 x 4 array of… ▽ More We report on the construction and laboratory testing of pixellated CZT detectors mounted in a flip-chip, tiled fashion and read out by an ASIC, as required for proposed hard X-ray astronomy missions. Two 10 mm x 10 mm x 5 mm detectors were fabricated, one out of standard eV Products high-pressure Bridgman CZT and one out of IMARAD horizontal Bridgman CZT. Each was fashioned with a 4 x 4 array of gold pixels on a 2.5 mm pitch with a surrounding guard ring. The detectors were mounted side by side on a carrier card, such that the pixel pitch was preserved, and read out by a 32-channel VA-TA ASIC from IDE AS Corp. controlled by a PC/104 single-board computer. A passive shield/collimator surrounded by plastic scintillator encloses the detectors on five sides and provides a ~40deg field of view. Thus this experiment tests key techniques required for future hard X-ray survey instruments. The experiment was taken to Ft Sumner, NM in May 2000 in preparation for a scientific balloon flight aboard the joint Harvard-MSFC EXITE2/HERO payload. Although we did not receive a flight opportunity, and are currently scheduled to fly in September 2000, we present our calibration data in the flight configuration together with data analysis techniques and simulations of the expected flight background spectrum. △ Less

Submitted 17 August, 2000; originally announced August 2000.

Comments: 12 pages LaTeX, 11 figures, to appear in Proc. SPIE 4140, "X-Ray and Gamma-Ray Instrumentation for Astronomy XI"

Development of Gold Contacted Flip-chip Detectors with IMARAD CZT

Authors: T. Narita, P. F. Bloser, J. E. Grindlay, J. A. Jenkins

Abstract: We present initial results from our evaluation of a gold-contacted pixellated detector using cadmium zinc telluride substrate produced by IMARAD Imaging Systems. The Horizontal Bridgman (HB) grown crystals from IMARAD have been shown to produce high resolution photopeaks, but they are also seen to have large leakage current. Our previous tests with IMARAD CZT showed that the use of indium anodes… ▽ More We present initial results from our evaluation of a gold-contacted pixellated detector using cadmium zinc telluride substrate produced by IMARAD Imaging Systems. The Horizontal Bridgman (HB) grown crystals from IMARAD have been shown to produce high resolution photopeaks, but they are also seen to have large leakage current. Our previous tests with IMARAD CZT showed that the use of indium anodes and gold cathode improved the resistivity compared to the standard indium-contacted detectors. We seek to test whether simple evaporated gold contacts alone could also reduce the leakage current and thus improve the spectral resolution, especially in the 10-100 keV energy range. We have fabricated several metal-semiconductor-metal (MSM) detectors with a 4x4 array of pixels on 10x10 mm substrates. Measurements of the detectors' leakage current, spectral response, and temperature sensitivity are presented and compared to IMARAD's ohmic contact detector and gold contact MSM detectors made of High Pressure Bridgman (HPB) material. Finally, we show preliminary results from a tiled flip-chip pixellated detector made using the IMARAD detectors. △ Less

Submitted 17 August, 2000; originally announced August 2000.

Comments: To appear in Proc. SPIE 4141, "Hard X-ray, Gamma-Ray, and Neutron Detector Physics II"

Low and High Frequency Quasi-Periodic Oscillations in 4U1915-05

Authors: L. Boirin, D. Barret, J. F. Olive, P. F. Bloser, J. E. Grindlay

Abstract: The X-ray burster and dipper 4U1915-05 (also known as XB1916-053) was observed 19 times for a total exposure of roughly 140 ks between 1996 February and October with the proportional counter array (PCA) aboard Rossi X-ray Timing Explorer (RXTE). We present here the detailed timing study of its X-ray emission. The source was observed in both a high intensity/soft spectral and a low intensity/hard… ▽ More The X-ray burster and dipper 4U1915-05 (also known as XB1916-053) was observed 19 times for a total exposure of roughly 140 ks between 1996 February and October with the proportional counter array (PCA) aboard Rossi X-ray Timing Explorer (RXTE). We present here the detailed timing study of its X-ray emission. The source was observed in both a high intensity/soft spectral and a low intensity/hard spectral state. The 2-20 keV luminosities are about 1.4x10^37 and 3.2x10^36 ergs/s in the two regimes respectively (assuming a source distance of 9.3 kpc). We confirm that 4U1915-05 is an atoll source based on its spectral behaviour and its aperiodic variability in the frequency range 4x10^{-3}-128 Hz. 4U1915-05 displays red noise below 1 Hz, but is especially remarkable for its quasi-periodic variability detected for the first time at several timescales. We detect low frequency quasi-periodic oscillations (LFQPOs) between 5 and 80 Hz, as well as high frequency QPOs (HFQPOs) between 200 and 1300 Hz. Both LFQPOs and HFQPOs frequencies positively correlate with the mass accretion rate inferred from the position of the source on the color-color diagram. In a narrow range of luminosity, we also detect twin simultaneous HFQPOs separated by 348 +/- 12 Hz. △ Less

Submitted 6 July, 2000; originally announced July 2000.

Comments: Accepted for publication in Astronomy and Astrophysics, 20 pages, 13 figures

Report number: CESR-00-01

RXTE Studies of X-ray Spectral Variations with Accretion Rate in 4U 1915-05

Authors: P. F. Bloser, J. E. Grindlay, D. Barret, L. Boirin

Abstract: We present the results of detailed spectral studies of the ultra-compact low mass X-ray binary (LMXB) 4U 1915-05 carried out with the Rossi X-ray Timing Explorer (RXTE) during 1996. 4U 1915-05 is an X-ray burster (XRB) known to exhibit a ~199-day modulation in its 2--12 keV flux. Observations were performed with the PCA and HEXTE instruments on RXTE at roughly one-month intervals to sample this… ▽ More We present the results of detailed spectral studies of the ultra-compact low mass X-ray binary (LMXB) 4U 1915-05 carried out with the Rossi X-ray Timing Explorer (RXTE) during 1996. 4U 1915-05 is an X-ray burster (XRB) known to exhibit a ~199-day modulation in its 2--12 keV flux. Observations were performed with the PCA and HEXTE instruments on RXTE at roughly one-month intervals to sample this long-term period and study accretion rate-related spectral changes. We obtain good fits with a model consisting of a blackbody and an exponentially cut-off power law. The spectral parameters are strongly correlated with both the broad-band (2--50 keV) luminosity and the position in the color-color diagram, with the source moving from a low hard state to a high soft state as the accretion rate increases. The blackbody component appears to drive the spectral evolution. Our results are consistent with a geometry in which the soft component arises from an optically thick boundary layer and the hard component from an extended Comptonizing corona. Comparing our results with those of a similar study of the brighter source 4U 1820-30 (Bloser et al. 2000), we find that the two ultra-compact LMXBs occupy similar spectral states even though the transitions occur at very different total luminosities. △ Less

Submitted 24 May, 2000; originally announced May 2000.

Comments: 27 pages LaTeX, 8 figures, accepted to the Astrophysical Journal

RXTE Studies of Long-Term X-ray Spectral Variations in 4U 1820-30

Authors: P. F. Bloser, J. E. Grindlay, P. Kaaret, W. Zhang, A. P. Smale, D. Barret

Abstract: We present the results of detailed spectral studies of the ultra-compact low mass X-ray binary (LMXB) 4U 1820-30 carried out with the Rossi X-ray Timing Explorer (RXTE) during 1996-7. 4U 1820-30 is an ``atoll'' source X-ray burster (XRB) located in the globular cluster NGC 6624. It is known to have an 11 minute binary period and a ~176 day modulation in its 2--12 keV flux. Observations were made… ▽ More We present the results of detailed spectral studies of the ultra-compact low mass X-ray binary (LMXB) 4U 1820-30 carried out with the Rossi X-ray Timing Explorer (RXTE) during 1996-7. 4U 1820-30 is an ``atoll'' source X-ray burster (XRB) located in the globular cluster NGC 6624. It is known to have an 11 minute binary period and a ~176 day modulation in its 2--12 keV flux. Observations were made with the PCA and HEXTE instruments on RXTE at roughly one-month intervals to sample this long-term period and study flux-related spectral changes. There are clear correlations between our fitted spectral parameters and both the broad-band (2--50 keV) flux and the position in the color-color diagram, as described by the parameter S_a introduced by Mendez et al. (1999). In addition, we find a strong correlation between the position in the color-color diagram and the frequencies of the kilohertz quasi-periodic oscillations (kHz QPOs) reported by Zhang et al. (1998). This lends further support to the notion that evidence for the last stable orbit in the accretion disk of 4U 1820-30 has been observed. For a model consisting of Comptonization of cool photons by hot electrons plus an additional blackbody component, we report an abrupt change in the spectral parameters at the same accretion rate at which the kHz QPOs disappear. For a model consisting of a multicolor disk blackbody plus a cut-off power law, we find that the inner disk radius reaches a minimum at the same accretion rate at which the kHz QPO frequency saturates, as expected if the disk reaches the last stable orbit. Both models face theoretical and observational problems when interpreted physically for this system. △ Less

Submitted 24 May, 2000; originally announced May 2000.

Comments: 39 pages, 11 figures, accepted to the Astrophysical Journal

Design and Testing of a Prototype Pixellated CZT Detector and Shield for Hard X-Ray Astronomy

Authors: P. F. Bloser, J. E. Grindlay, T. Narita, J. A. Jenkins

Abstract: We report on the design and laboratory testing of a prototype imaging CZT detector intended for balloon flight testing in April 2000. The detector tests several key techniques needed for the construction of large-area CZT arrays, as required for proposed hard X-ray astronomy missions. Two 10 mm x 10 mm x 5 mm CZT detectors, each with a 4 x 4 array of 1.9 mm pixels on a 2.5 mm pitch, will be moun… ▽ More We report on the design and laboratory testing of a prototype imaging CZT detector intended for balloon flight testing in April 2000. The detector tests several key techniques needed for the construction of large-area CZT arrays, as required for proposed hard X-ray astronomy missions. Two 10 mm x 10 mm x 5 mm CZT detectors, each with a 4 x 4 array of 1.9 mm pixels on a 2.5 mm pitch, will be mounted in a ``flip-chip'' fashion on a printed circuit board carrier card; the detectors will be placed 0.3 mm apart in a tiled configuration such that the pixel pitch is preserved across both crystals. One detector is eV Products high-pressure Bridgman CZT, and the other is IMARAD horizontal Bridgman material. Both detectors are read out by a 32-channel VA-TA ASIC controlled by a PC/104 single-board computer. A passive shield/collimator surrounded by plastic scintillator surrounds the detectors on five sides and provides a ~45 deg field of view. The background spectrum recorded by this instrument will be compared to that measured by a single-element CZT detector (10 mm x 10 mm x 2 mm high-pressure Bridgman material from eV Products) fitted with the same passive/plastic collimator but including an active BGO shield to the rear. This detector has been previously flown by us completely shielded by a passive cover. We describe preliminary laboratory results for the various systems, discuss initial background simulations, and describe our plans for balloon flight tests. △ Less

Submitted 13 October, 1999; originally announced October 1999.

Comments: 9 pages LaTeX, 10 figures, to appear in Proc. SPIE 3765, "EUV, X-Ray, and Gamma-Ray Instrumentation for Astronomy X"

Strong Field Gravity and X-Ray Observations of 4U1820-30

Authors: P. Kaaret, S. Piraino, P. F. Bloser, E. C. Ford, J. E. Grindlay, A. Santangelo, A. P. Smale, W. Zhang

Abstract: The behavior of quasi-periodic oscillations (QPOs) at frequencies near 1 kHz in the x-ray emission from the neutron star x-ray binary 4U1820-30 has been interpreted as evidence for the existence of the marginally stable orbit, a key prediction of strong-field general relativity. The signature of the marginally stable orbit is a saturation in QPO frequency, assumed to track inner disk radius, ver… ▽ More The behavior of quasi-periodic oscillations (QPOs) at frequencies near 1 kHz in the x-ray emission from the neutron star x-ray binary 4U1820-30 has been interpreted as evidence for the existence of the marginally stable orbit, a key prediction of strong-field general relativity. The signature of the marginally stable orbit is a saturation in QPO frequency, assumed to track inner disk radius, versus mass accretion rate. Previous studies of 4U1820-30 have used x-ray count rate as an indicator of mass accretion rate. However, x-ray count rate is known to not correlate robustly with mass accretion rate or QPO frequency in other sources. Here, we examine the QPO frequency dependence on two other indicators of mass accretion rate: energy flux and x-ray spectral shape. Using either of these indicators, we find that the QPO frequency saturates at high mass accretion rates. We interpret this as strong evidence for the existence of the marginally stable orbit. △ Less

Submitted 18 May, 1999; originally announced May 1999.

Comments: accepted to the Astrophysical Journal Letters, 7 pages

Low and high frequency Quasi-Periodic Oscillations in 4U1915-05

Authors: L. Boirin, D. Barret, J. F. Olive, J. E. Grindlay, P. F. Bloser

Abstract: The burster and dipper Low Mass X-ray Binary (LMXB) 4U1915-05 (also known as XB1916-053) was observed by the Rossi X-ray Timing Explorer (RXTE) 19 times for a total exposure of 140 ks between 1996 February and October. Here we report on the discovery of Low Frequency (10-40 Hz) Quasi-Periodic Oscillations (LFQPOs) from 4U1915-05. The properties of the LFQPOs are related to the presence of the Hi… ▽ More The burster and dipper Low Mass X-ray Binary (LMXB) 4U1915-05 (also known as XB1916-053) was observed by the Rossi X-ray Timing Explorer (RXTE) 19 times for a total exposure of 140 ks between 1996 February and October. Here we report on the discovery of Low Frequency (10-40 Hz) Quasi-Periodic Oscillations (LFQPOs) from 4U1915-05. The properties of the LFQPOs are related to the presence of the High Frequency QPOs (HFQPOs) detected simultaneously. We have observed a correlation between the LFQPO frequency and source count rate, as well as a correlation (linear) between the LFQPOs and HFQPOs. Both results cannot be explained by a Beat Frequency Model (BFM). They are also hardly compatible with predictions from the inner disk precession model. △ Less

Submitted 17 February, 1999; originally announced February 1999.

Comments: Accepted for publication in Advances in Space Research, Proc. of the 32nd COSPAR Meeting help in Nagoya, 12-15 July 1998, "Broad band spectra of cosmic X-ray sources", 4 pages, 2 figures

Journal ref: AIP Conf.Proc.599:518-521,1999

Discovery of High Frequency Quasi-Periodic Oscillations in 4u1915-05

Authors: D. Barret, L. Boirin, J. F. Olive, J. E. Grindlay, P. F. Bloser, J. Swank, A. P. Smale

Abstract: The type I X-ray burster and dipper 4U1915-05 (also known as XB1916-053) was monitored by the Rossi X-ray Timing Explorer between February and October, 1996. The source was observed in various spectral states; the highest luminosity state (LX ~ 1.5 10^37 ergs/s, 10 kpc, 1-20 keV) is associated with a soft spectrum, whereas for the lower luminosity state (down to ~5 10^36 ergs/s) the spectrum is… ▽ More The type I X-ray burster and dipper 4U1915-05 (also known as XB1916-053) was monitored by the Rossi X-ray Timing Explorer between February and October, 1996. The source was observed in various spectral states; the highest luminosity state (LX ~ 1.5 10^37 ergs/s, 10 kpc, 1-20 keV) is associated with a soft spectrum, whereas for the lower luminosity state (down to ~5 10^36 ergs/s) the spectrum is significantly harder. Using the high time resolution data provided by the Proportional Counter Array (PCA), we have discovered High-Frequency Quasi-Periodic Oscillations (HFQPOs) in the persistent X-ray emission of 4U1915-05 while its luminosity was ~8 10^36 ergs/s. The QPO frequency ranges from 600 Hz up to ~1000 Hz, with typical Full Width at Half Maximum (FWHM) ~50-100 Hz and Root Mean Squared (RMS) values 15%. In addition, by using the ``shift and add'' technique, we have detected a twin HFQPO (5.5 sigma level) separated from the main peak by ~355 Hz. 4U1915-05 is the eighth Atoll source displaying simultaneous twin HFQPOs. Based on current knowledge of HFQPO sources, our observations suggest that 4U1915-05 might contain a 2.8 (or 5.6) millisecond rotating neutron star. △ Less

Submitted 15 November, 1998; originally announced November 1998.

Comments: Paper presented at the Third INTEGRAL Workshop (The Extreme Universe, September 14-18th, 1998, Taormina, Italy). Accepted for publication in Astrophysical Letters and Communications: 7 pages,1 table and 4 figures

Report number: CESR-98-03

Prototype Imaging Cd-Zn-Te Array Detector

Authors: P. F. Bloser, T. Narita, J. E. Grindlay, K. Shah

Abstract: We describe initial results of our program to develop and test Cd-Zn-Te (CZT) detectors with a pixellated array readout. Our primary interest is in the development of relatively thick CZT detectors for use in astrophysical coded aperture telescopes with response extending over the energy range $\sim 10-600$ keV. The coded aperture imaging configuration requires only relatively large area pixels… ▽ More We describe initial results of our program to develop and test Cd-Zn-Te (CZT) detectors with a pixellated array readout. Our primary interest is in the development of relatively thick CZT detectors for use in astrophysical coded aperture telescopes with response extending over the energy range $\sim 10-600$ keV. The coded aperture imaging configuration requires only relatively large area pixels (1-3 mm), whereas the desired high energy response requires detector thicknesses of at least 3-5 mm. We have developed a prototype detector employing a 10 x 10 x 5 mm CZT substrate and 4 x 4 pixel (1.5 mm each) readout with gold metal contacts for the pixels and continuous gold contact for the bias on the opposite detector face. This MSM contact configuration was fabricated by RMD and tested at Harvard for uniformity, efficiency and spatial as well as spectral resolution. We have developed an ASIC readout (IDE-VA-1) and analysis system and report results, including $\sim 4$% (FWHM) energy resolution at 60 keV. A prototype design for a full imaging detector array is discussed. △ Less

Submitted 15 January, 1998; originally announced January 1998.

Comments: Presented at MRS Symposium, Boston (Dec. 1997) and to be published in "Semiconductors for Room-Temperature Radiation Detector Applications II" (R.B. James et al, eds.; ISBN: 1-55899-392-4). 6 pages Latex with 7 figures (gzipped postscript)