Showing 1–2 of 2 results for author: Witvers, R H

Numerical Results for the System Noise Temperature of an Aperture Array Tile and Comparison with Measurements

Authors: M. V. Ivashina, E. E. M. Woestenburg, L. Bakker, R. H. Witvers

Abstract: The purpose of this report is to document the noise performance of a complex beamforming array antenna system and to characterize the recently developed noise measurement facility called THACO, which was developed at ASTRON. The receiver system includes the array antenna of strongly coupled 144 TSA elements, 144 Low Noise Amplifiers (LNAs) (Tmin =35-40K) and the data recording/storing facilities o… ▽ More The purpose of this report is to document the noise performance of a complex beamforming array antenna system and to characterize the recently developed noise measurement facility called THACO, which was developed at ASTRON. The receiver system includes the array antenna of strongly coupled 144 TSA elements, 144 Low Noise Amplifiers (LNAs) (Tmin =35-40K) and the data recording/storing facilities of the initial test station that allow for off-line digital beamforming. The primary goal of this study is to compare the measured receiver noise temperatures with the simulated values for several practical beamformers, and to predict the associated receiver noise coupling contribution, antenna thermal noise and ground noise pick-up (due to the back radiation). △ Less

Submitted 13 October, 2011; originally announced October 2011.

Comments: ASTRON report

Report number: RP324 (2011)

THACO, a Test Facility for Characterizing the Noise Performance of Active Antenna Arrays

Authors: E. E. M. Woestenburg, L. Bakker, M. Ruiter, M. V. Ivashina, R. H. Witvers

Abstract: This paper discusses an outdoor test facility for the noise characterization of active antenna arrays, using measurement results of array noise temperatures in the order of 50 K for a number of small aperture arrays. The measurement results are obtained by a Y-factor method with hot and a cold noise sources, with an absorber at room temperature as the hot load and the cold sky as the cold load. Th… ▽ More This paper discusses an outdoor test facility for the noise characterization of active antenna arrays, using measurement results of array noise temperatures in the order of 50 K for a number of small aperture arrays. The measurement results are obtained by a Y-factor method with hot and a cold noise sources, with an absorber at room temperature as the hot load and the cold sky as the cold load. The effect of shielding the arrays by the test facility, with respect to noise and RFI from the environment, will also be discussed. △ Less

Submitted 13 October, 2011; v1 submitted 27 August, 2011; originally announced August 2011.

Comments: 4 pages, 6 figures. Official Publication: Microwave Journal; Proc. of European Microwave Week (EuMW2011), October 9th-14th, 2011