Showing 1–50 of 67 results for author: Agarwal, S

A dissipation-induced superradiant transition in a strontium cavity-QED system

Authors: Eric Yilun Song, Diego Barberena, Dylan J. Young, Edwin Chaparro, Anjun Chu, Sanaa Agarwal, Zhijing Niu, Jeremy T. Young, Ana Maria Rey, James K. Thompson

Abstract: In cavity quantum electrodynamics (QED), emitters and a resonator are coupled together to enable precise studies of quantum light-matter interactions. Over the past few decades, this has led to a variety of quantum technologies such as more precise inertial sensors, clocks, memories, controllable qubits, and quantum simulators. Furthermore, the intrinsically dissipative nature of cavity QED platfo… ▽ More In cavity quantum electrodynamics (QED), emitters and a resonator are coupled together to enable precise studies of quantum light-matter interactions. Over the past few decades, this has led to a variety of quantum technologies such as more precise inertial sensors, clocks, memories, controllable qubits, and quantum simulators. Furthermore, the intrinsically dissipative nature of cavity QED platforms makes them a natural testbed for exploring driven-dissipative phenomena in open quantum systems as well as equilibrium and non-equilibrium phase transitions in quantum optics. One such model, the so-called cooperative resonance fluorescence (CRF) model, concerns the behavior of coherently driven emitters in the presence of collective dissipation (superradiance). Despite tremendous interest, this model has yet to be realized in a clean experimental system. Here we provide an observation of the continuous superradiant phase transition predicted in the CRF model using an ensemble of ultracold $^{88}$Sr atoms coupled to a driven high-finesse optical cavity on a long-lived optical transition. Below a critical drive, atoms quickly reach a steady state determined by the self-balancing of the drive and the collective dissipation. The steady state possesses a macroscopic dipole moment and corresponds to a superradiant phase. Above a critical drive strength, the atoms undergo persistent Rabi-like oscillations until other decoherence processes kick in. In fact, our platform also allows us to witness the change of this phase transition from second to first order induced by single-particle spontaneous emission, which pushes the system towards a different steady state. Our observations are a first step towards finer control of driven-dissipative systems, which have been predicted to generate quantum states that can be harnessed for quantum information processing and in particular quantum sensing. △ Less

Submitted 26 August, 2024; v1 submitted 20 August, 2024; originally announced August 2024.

Comments: 12 pages, 7 figures (main text and methods); 11 pages, 4 figures (supplementary information); typos corrected

Quantum noise induced nonreciprocity for single photon transport in parity-time symmetric systems

Authors: Dibyendu Roy, G. S. Agarwal

Abstract: We show nonreciprocal light propagation for single-photon inputs due to quantum noise in coupled optical systems with gain and loss. We consider two parity-time ($\mathcal{PT}$) symmetric linear optical systems consisting of either two directly coupled resonators or two finite-length waveguides evanescently coupled in parallel. One resonator or waveguide is filled with an active gain medium and th… ▽ More We show nonreciprocal light propagation for single-photon inputs due to quantum noise in coupled optical systems with gain and loss. We consider two parity-time ($\mathcal{PT}$) symmetric linear optical systems consisting of either two directly coupled resonators or two finite-length waveguides evanescently coupled in parallel. One resonator or waveguide is filled with an active gain medium and the other with a passive loss medium. The light propagation is reciprocal in such $\mathcal{PT}$ symmetric linear systems without quantum noise. We show here that light transmission becomes nonreciprocal when we include quantum noises in our modeling, which is essential for a proper physical description. The quantum nonreciprocity is especially pronounced in the $\mathcal{PT}$ broken phase. Transmitted light intensity in the waveguide of incidence is asymmetric for two waveguides even without noise. Quantum noise significantly enhances such asymmetry in the broken phase. △ Less

Submitted 30 June, 2024; originally announced July 2024.

Comments: 12 pages, 4 figures

Directional superradiance in a driven ultracold atomic gas in free-space

Authors: Sanaa Agarwal, Edwin Chaparro, Diego Barberena, A. Piñeiro Orioli, G. Ferioli, S. Pancaldi, I. Ferrier-Barbut, A. Browaeys, A. M. Rey

Abstract: Ultra-cold atomic systems are among the most promising platforms that have the potential to shed light on the complex behavior of many-body quantum systems. One prominent example is the case of a dense ensemble illuminated by a strong coherent drive while interacting via dipole-dipole interactions. Despite being subjected to intense investigations, this system retains many open questions. A recent… ▽ More Ultra-cold atomic systems are among the most promising platforms that have the potential to shed light on the complex behavior of many-body quantum systems. One prominent example is the case of a dense ensemble illuminated by a strong coherent drive while interacting via dipole-dipole interactions. Despite being subjected to intense investigations, this system retains many open questions. A recent experiment carried out in a pencil-shaped geometry reported measurements that seemed consistent with the emergence of strong collective effects in the form of a ``superradiant'' phase transition in free space, when looking at the light emission properties in the forward direction. Motivated by the experimental observations, we carry out a systematic theoretical analysis of the system's steady-state properties as a function of the driving strength and atom number, $N$. We observe signatures of collective effects in the weak drive regime, which disappear with increasing drive strength as the system evolves into a single-particle-like mixed state comprised of randomly aligned dipoles. Although the steady-state features some similarities to the reported superradiant to normal non-equilibrium transition, also known as cooperative resonance fluorescence, we observe significant qualitative and quantitative differences, including a different scaling of the critical drive parameter (from $N$ to $\sqrt{N}$). We validate the applicability of a mean-field treatment to capture the steady-state dynamics under currently accessible conditions. Furthermore, we develop a simple theoretical model that explains the scaling properties by accounting for interaction-induced inhomogeneous effects and spontaneous emission, which are intrinsic features of interacting disordered arrays in free space. △ Less

Submitted 22 March, 2024; originally announced March 2024.

Comments: 25 pages, 19 figures

Single-photon induced instabilities in a cavity electromechanical device

Authors: Tanmoy Bera, Mridul Kandpal, G. S. Agarwal, Vibhor Singh

Abstract: Cavity-electromechanical systems are extensively used for sensing and controlling the vibrations of mechanical resonators down to their quantum limit. The nonlinear radiation-pressure interaction in these systems could result in an unstable response of the mechanical resonator showing features such as frequency-combs, period-doubling bifurcations and chaos. However, due to weak light-matter intera… ▽ More Cavity-electromechanical systems are extensively used for sensing and controlling the vibrations of mechanical resonators down to their quantum limit. The nonlinear radiation-pressure interaction in these systems could result in an unstable response of the mechanical resonator showing features such as frequency-combs, period-doubling bifurcations and chaos. However, due to weak light-matter interaction, typically these effects appear at very high driving strengths. By using polariton modes formed by a strongly coupled flux-tunable transmon and a microwave cavity, here we demonstrate an electromechanical device and achieve a single-photon coupling rate $g_0/2π$ of $160~$kHz, which is nearly 4\% of the mechanical frequency $ω_m$. Due to large $g_0/ω_m$ ratio, the device shows an unstable mechanical response resulting in frequency combs in sub-single photon limit. We systematically investigate the boundary of the unstable response and identify two important regimes governed by the optomechanical backaction and the nonlinearity of the electromagnetic mode. Such an improvement in the single-photon coupling rate and the observations of microwave frequency combs at single-photon levels may have applications in the quantum control of the motional states and critical parametric sensing. Our experiments strongly suggest the requirement of newer approaches to understand instabilities. △ Less

Submitted 2 May, 2024; v1 submitted 13 September, 2023; originally announced September 2023.

Comments: Total 25 pages with 12 figures (6 Main, 6 Supplementary)

Journal ref: Nature Communications 15, 7115 (2024)

Topological transitions in dissipatively coupled Su-Schrieffer-Heeger models

Authors: Jayakrishnan M. P. Nair, Marlan O. Scully, Girish S. Agarwal

Abstract: Non-Hermitian topological phenomena have gained much interest among physicists in recent years. In this paper, we expound on the physics of dissipatively coupled Su-Schrieffer-Heeger (SSH) lattices, specifically in systems with bosonic and electrical constituents. In the context of electrical circuits, we demonstrate that a series of resistively coupled LCR circuits mimics the topology of a dissip… ▽ More Non-Hermitian topological phenomena have gained much interest among physicists in recent years. In this paper, we expound on the physics of dissipatively coupled Su-Schrieffer-Heeger (SSH) lattices, specifically in systems with bosonic and electrical constituents. In the context of electrical circuits, we demonstrate that a series of resistively coupled LCR circuits mimics the topology of a dissipatively coupled SSH model. In addition, we foreground a scheme to construct dissipatively coupled SSH lattices involving a set of non-interacting bosonic oscillators weakly coupled to engineered reservoirs of modes possessing substantially small lifetimes when compared to other system timescales. Further, by activating the coherent coupling between bosonic oscillators, we elucidate the emergence of non-reciprocal dissipative coupling which can be controlled by the phase of the coherent interaction strength precipitating in phase-dependent topological transitions and skin effect. Our analyses are generic, apropos of a large class of systems involving, for instance, optical and microwave settings, while the circuit implementation represents the most straightforward of them. △ Less

Submitted 11 September, 2023; originally announced September 2023.

Comments: 10 pages, 9 figures

Journal ref: Physical Review B 108, 184304 (2023)

Electronic Structure Prediction of Multi-million Atom Systems Through Uncertainty Quantification Enabled Transfer Learning

Authors: Shashank Pathrudkar, Ponkrshnan Thiagarajan, Shivang Agarwal, Amartya S. Banerjee, Susanta Ghosh

Abstract: The ground state electron density -- obtainable using Kohn-Sham Density Functional Theory (KS-DFT) simulations -- contains a wealth of material information, making its prediction via machine learning (ML) models attractive. However, the computational expense of KS-DFT scales cubically with system size which tends to stymie training data generation, making it difficult to develop quantifiably accur… ▽ More The ground state electron density -- obtainable using Kohn-Sham Density Functional Theory (KS-DFT) simulations -- contains a wealth of material information, making its prediction via machine learning (ML) models attractive. However, the computational expense of KS-DFT scales cubically with system size which tends to stymie training data generation, making it difficult to develop quantifiably accurate ML models that are applicable across many scales and system configurations. Here, we address this fundamental challenge by employing transfer learning to leverage the multi-scale nature of the training data, while comprehensively sampling system configurations using thermalization. Our ML models are less reliant on heuristics, and being based on Bayesian neural networks, enable uncertainty quantification. We show that our models incur significantly lower data generation costs while allowing confident -- and when verifiable, accurate -- predictions for a wide variety of bulk systems well beyond training, including systems with defects, different alloy compositions, and at unprecedented, multi-million-atom scales. Moreover, such predictions can be carried out using only modest computational resources. △ Less

Submitted 1 May, 2024; v1 submitted 24 August, 2023; originally announced August 2023.

Explainable Machine Learning for Hydrogen Diffusion in Metals and Random Binary Alloys

Authors: Grace M. Lu, Matthew Witman, Sapan Agarwal, Vitalie Stavila, Dallas R. Trinkle

Abstract: Hydrogen diffusion in metals and alloys plays an important role in the discovery of new materials for fuel cell and energy storage technology. While analytic models use hand-selected features that have clear physical ties to hydrogen diffusion, they often lack accuracy when making quantitative predictions. Machine learning models are capable of making accurate predictions, but their inner workings… ▽ More Hydrogen diffusion in metals and alloys plays an important role in the discovery of new materials for fuel cell and energy storage technology. While analytic models use hand-selected features that have clear physical ties to hydrogen diffusion, they often lack accuracy when making quantitative predictions. Machine learning models are capable of making accurate predictions, but their inner workings are obscured, rendering it unclear which physical features are truly important. To develop interpretable machine learning models to predict the activation energies of hydrogen diffusion in metals and random binary alloys, we create a database for physical and chemical properties of the species and use it to fit six machine learning models. Our models achieve root-mean-squared-errors between 98-119 meV on the testing data and accurately predict that elemental Ru has a large activation energy, while elemental Cr and Fe have small activation energies. By analyzing the feature importances of these fitted models, we identify relevant physical properties for predicting hydrogen diffusivity. While metrics for measuring the individual feature importances for machine learning models exist, correlations between the features lead to disagreement between models and limit the conclusions that can be drawn. Instead grouped feature importances, formed by combining the features via their correlations, agree across the six models and reveal that the two groups containing the packing factor and electronic specific heat are particularly significant for predicting hydrogen diffusion in metals and random binary alloys. This framework allows us to interpret machine learning models and enables rapid screening of new materials with the desired rates of hydrogen diffusion. △ Less

Submitted 26 October, 2023; v1 submitted 15 August, 2023; originally announced August 2023.

Comments: 36 pages, 8 figures, supplemental material

Journal ref: Phys. Rev. Materials 7, 105402 (2023)

Nonreciprocal heat flux via synthetic fields in linear quantum systems

Authors: S. -A. Biehs, P. Rodriguez-Lopez, M. Antezza, G. S. Agarwal

Abstract: We study the heat transfer between N coupled quantum resonators with applied synthetic electric and magnetic fields realized by changing the resonators parameters by external drivings. To this end we develop two general methods, based on the quantum optical master equation and on the Langevin equation for $N$ coupled oscillators where all quantum oscillators can have their own heat baths. The synt… ▽ More We study the heat transfer between N coupled quantum resonators with applied synthetic electric and magnetic fields realized by changing the resonators parameters by external drivings. To this end we develop two general methods, based on the quantum optical master equation and on the Langevin equation for $N$ coupled oscillators where all quantum oscillators can have their own heat baths. The synthetic electric and magnetic fields are generated by a dynamical modulation of the oscillator resonance with a given phase. Using Floquet theory we solve the dynamical equations with both methods which allow us to determine the heat flux spectra and the transferred power. With apply these methods to study the specific case of a linear tight-binding chain of four quantum coupled resonators. We find that in that case, in addition to a non-reciprocal heat flux spectrum already predicted in previous investigations, the synthetic fields induce here non-reciprocity in the total heat flux hence realizing a net heat flux rectification. △ Less

Submitted 12 June, 2023; v1 submitted 29 May, 2023; originally announced May 2023.

Journal ref: Phys. Rev. A 108, 042201 (2023)

Enhancement of synthetic magnetic field induced nonreciprocity via bound states in continuum in dissipatively coupled systems

Authors: S. -A. Biehs, G. S. Agarwal

Abstract: The nonreciprocal propagation of light typically requires use of materials like ferrites or magneto-optical media with a strong magnetic bias or methods based on material nonlinearities which require use of strong electromagnetic fields. A simpler possibility to produce nonreciprocity is to use spatio-temporal modulations to produce magnetic fields in synthetic dimensions. In this paper we show th… ▽ More The nonreciprocal propagation of light typically requires use of materials like ferrites or magneto-optical media with a strong magnetic bias or methods based on material nonlinearities which require use of strong electromagnetic fields. A simpler possibility to produce nonreciprocity is to use spatio-temporal modulations to produce magnetic fields in synthetic dimensions. In this paper we show that dissipatively coupled systems can lead to considerable enhancement of nonreciprocity in synthetic fields. The enhancement comes about from the existence of nearly nondecaying mode -bound state in continuum (BIC) in dissipatively coupled systems. The dissipative coupling occurs in a wide class of systems coupled via transmission lines, waveguides, or nano fibers. The systems could be optical resonators or microscopic qubits. Remarkably we find that for specific choice of the modulation amplitudes, the transmission say in forward direction is completely extinguished whereas in the backward direction it becomes maximum. The synthetic fields produce transmission resonances which show significant line narrowing which owe their origin to existence of BIC's in dissipative systems. △ Less

Submitted 24 May, 2023; originally announced May 2023.

Parallel Matrix Multiplication Using Voltage Controlled Magnetic Anisotropy Domain Wall Logic

Authors: Nicholas Zogbi, Samuel Liu, Christopher H. Bennett, Sapan Agarwal, Matthew J. Marinella, Jean Anne C. Incorvia, T. Patrick Xiao

Abstract: The domain wall-magnetic tunnel junction (DW-MTJ) is a versatile device that can simultaneously store data and perform computations. These three-terminal devices are promising for digital logic due to their nonvolatility, low-energy operation, and radiation hardness. Here, we augment the DW-MTJ logic gate with voltage controlled magnetic anisotropy (VCMA) to improve the reliability of logical conc… ▽ More The domain wall-magnetic tunnel junction (DW-MTJ) is a versatile device that can simultaneously store data and perform computations. These three-terminal devices are promising for digital logic due to their nonvolatility, low-energy operation, and radiation hardness. Here, we augment the DW-MTJ logic gate with voltage controlled magnetic anisotropy (VCMA) to improve the reliability of logical concatenation in the presence of realistic process variations. VCMA creates potential wells that allow for reliable and repeatable localization of domain walls. The DW-MTJ logic gate supports different fanouts, allowing for multiple inputs and outputs for a single device without affecting area. We simulate a systolic array of DW-MTJ Multiply-Accumulate (MAC) units with 4-bit and 8-bit precision, which uses the nonvolatility of DW-MTJ logic gates to enable fine-grained pipelining and high parallelism. The DW-MTJ systolic array provides comparable throughput and efficiency to state-of-the-art CMOS systolic arrays while being radiation-hard. These results improve the feasibility of using domain wall-based processors, especially for extreme-environment applications such as space. △ Less

Submitted 14 April, 2023; v1 submitted 26 January, 2023; originally announced January 2023.

Comments: 8 pages, 8 figures (main paper) + 4 pages, 5 figures (supplementary information)

Carbon Kagome Nanotubes -- quasi-one-dimensional nanostructures with flat bands

Authors: Hsuan Ming Yu, Shivam Sharma, Shivang Agarwal, Olivia Liebman, Amartya S. Banerjee

Abstract: We introduce carbon Kagome nanotubes (CKNTs) -- a new allotrope of carbon formed by rolling up sheets of Kagome graphene, and investigate the properties of this material using first principles calculations. Based on the direction of rolling, we identify two principal varieties of CKNTs -- armchair and zigzag, and find that the bending stiffness associated with rolling Kagome graphene into either t… ▽ More We introduce carbon Kagome nanotubes (CKNTs) -- a new allotrope of carbon formed by rolling up sheets of Kagome graphene, and investigate the properties of this material using first principles calculations. Based on the direction of rolling, we identify two principal varieties of CKNTs -- armchair and zigzag, and find that the bending stiffness associated with rolling Kagome graphene into either type of CKNT is about a third of that associated with rolling conventional graphene into carbon nanotubes (CNTs). Ab initio molecular dynamics simulations indicate that both types of CKNTs are likely to exist as stable structures at room temperature. Each CKNT explored here is metallic and features dispersionless states (i.e., flat bands) throughout its Brillouin zone, along with an associated singular peak in the electronic density of states, close to the Fermi level. We calculate the mechanical and electronic response of CKNTs to torsional and axial strains and compare against conventional CNTs. We show in particular, that upon twisting, degenerate dispersionless electronic states in CKNTs split, Dirac points and partially flat bands emerge from the quadratic band crossing point at the Fermi level, and that these features can be explained using a relatively simple tight-binding model. Overall, CKNTs appear to be unique and striking examples of realistic elemental quasi-one-dimensional (1D) materials that can potentially display fascinating collective material properties arising from the presence of strongly correlated electrons. Additionally, distorted CKNTs may provide an interesting material platform where flat band physics and chirality induced anomalous transport effects may be studied together. △ Less

Submitted 14 December, 2023; v1 submitted 24 January, 2023; originally announced January 2023.

Breakdown of detailed balance for thermal radiation by synthetic fields

Authors: S. -A. Biehs, G. S. Agarwal

Abstract: In recent times the possibility of non-reciprocity in heat transfer between two bodies has been extensively studied. In particular the role of strong magnetic fields has been investigated. A much simpler approach with considerable flexibility would be to consider heat transfer in synthetic electric and magnetic fields which are easily applied. We demonstrate the breakdown of detailed balance for t… ▽ More In recent times the possibility of non-reciprocity in heat transfer between two bodies has been extensively studied. In particular the role of strong magnetic fields has been investigated. A much simpler approach with considerable flexibility would be to consider heat transfer in synthetic electric and magnetic fields which are easily applied. We demonstrate the breakdown of detailed balance for the heat transfer function $\mathcal{T} (ω)$, i.e. the spectrum of heat transfer between two objects due to the presence of synthetic electric and magnetic fields. The spectral measurements carry lot more physical information and were the reason for the quantum theory of radiation. We demonstrate explicitly the synthetic field induced non-reciprocity in the heat transfer transmission function between two graphene flakes and for the Casimir coupling between two objects. Unlike many other cases of heat transfer, the latter case has interesting features of the strong coupling. Further the presence of synthetic fields affects the mean occupation numbers of two membranes and propose this system for the experimental verification of the breakdown of detailed balance. △ Less

Submitted 24 October, 2022; originally announced October 2022.

Solution of the Schrodinger equation for quasi-one-dimensional materials using helical waves

Authors: Shivang Agarwal, Amartya S. Banerjee

Abstract: We formulate and implement a spectral method for solving the Schrodinger equation, as it applies to quasi-one-dimensional materials and structures. This allows for computation of the electronic structure of important technological materials such as nanotubes (of arbitrary chirality), nanowires, nanoribbons, chiral nanoassemblies, nanosprings and nanocoils, in an accurate, efficient and systematic… ▽ More We formulate and implement a spectral method for solving the Schrodinger equation, as it applies to quasi-one-dimensional materials and structures. This allows for computation of the electronic structure of important technological materials such as nanotubes (of arbitrary chirality), nanowires, nanoribbons, chiral nanoassemblies, nanosprings and nanocoils, in an accurate, efficient and systematic manner. Our work is motivated by the observation that one of the most successful methods for carrying out electronic structure calculations of bulk/crystalline systems -- the plane-wave method -- is a spectral method based on eigenfunction expansion. Our scheme avoids computationally onerous approximations involving periodic supercells often employed in conventional plane-wave calculations of quasi-one-dimensional materials, and also overcomes several limitations of other discretization strategies, e.g., those based on finite differences and atomic orbitals. We describe the setup of fast transforms to carry out discretization of the governing equations using our basis set, and the use of matrix-free iterative diagonalization to obtain the electronic eigenstates. Miscellaneous computational details, including the choice of eigensolvers, use of a preconditioning scheme, evaluation of oscillatory radial integrals and the imposition of a kinetic energy cutoff are discussed. We have implemented these strategies into a computational package called HelicES (Helical Electronic Structure). We demonstrate the utility of our method in carrying out systematic electronic structure calculations of various quasi-one-dimensional materials through numerous examples involving nanotubes, nanoribbons and nanowires. We also explore the convergence, accuracy and efficiency of our method. We anticipate that our method will find numerous applications in computational nanomechanics and materials science. △ Less

Submitted 22 September, 2023; v1 submitted 21 October, 2022; originally announced October 2022.

Simple generic picture of toughness in solid polymer blends

Authors: Debashish Mukherji, Shubham Agarwal, Tiago Espinosa de Oliveira, Céline Ruscher, Jörg Rottler

Abstract: Toughness $\mathcal{T}$ of a brittle polymeric solid can be enhanced by blending another compatible and ductile polymer. While this common wisdom is generally valid, a generic picture is lacking that connects the atomistic details to the macroscopic non-linear mechanics. Using all-atom and complementary generic simulations we show how a delicate balance between the side group contact density of th… ▽ More Toughness $\mathcal{T}$ of a brittle polymeric solid can be enhanced by blending another compatible and ductile polymer. While this common wisdom is generally valid, a generic picture is lacking that connects the atomistic details to the macroscopic non-linear mechanics. Using all-atom and complementary generic simulations we show how a delicate balance between the side group contact density of the brittle polymers $ρ_{\rm c}$ and its dilution upon adding a second component controls $\mathcal{T}$. A broad range of systems follows a universal trend in $\mathcal{T}$ with ${\rm d}ρ_{\rm c}/{\rm d}\varepsilon$, where $\varepsilon$ is the tensile strain. The simulation data is consistent with a simple model based on the parallel spring analogy. △ Less

Submitted 26 July, 2022; originally announced July 2022.

Journal ref: Physical Review Materials 7, 115601 (2023)

Mechanistic framework for reduced-order models in soft materials: Application to three-dimensional granular intrusion

Authors: Shashank Agarwal, Daniel I Goldman, Ken Kamrin

Abstract: Soft materials often display complex behaviors that transition through apparent solid- and fluid-like regimes. While a growing number of microscale simulation methods exist for these materials, reduced-order models that encapsulate the global-scale physics are often desired to predict how external bodies interact with soft media, as occurs in diverse situations from impact and penetration problems… ▽ More Soft materials often display complex behaviors that transition through apparent solid- and fluid-like regimes. While a growing number of microscale simulation methods exist for these materials, reduced-order models that encapsulate the global-scale physics are often desired to predict how external bodies interact with soft media, as occurs in diverse situations from impact and penetration problems to locomotion over natural terrains. This work proposes a systematic program to develop three-dimensional reduced-order models for soft materials from a fundamental basis using continuum symmetries and rheological principles. In particular, we derive a reduced-order technique for modeling intrusion in granular media which we term three-dimensional Resistive Force Theory (3D-RFT), which is capable of accurately and quickly predicting the resistive stress distribution on arbitrary-shaped intruding bodies. Aided by a continuum description of the granular medium, a comprehensive set of spatial symmetry constraints, and a limited amount of reference data, we develop a self-consistent and accurate 3D-RFT. We verify the model capabilities in a wide range of cases and show it can be quickly recalibrated to different media and intruder surface types. The premises leading to 3D-RFT anticipate application to other soft materials with strongly hyperlocalized intrusion behavior. △ Less

Submitted 10 December, 2022; v1 submitted 30 May, 2022; originally announced May 2022.

Comments: 12 pages, 7 figures, 1 SI document (12 pages, 8 figures, and 4 tables)

First Order Topological Phase Transitions and Disorder Induced Majorana Modes in Interacting Fermion Chains

Authors: Shruti Agarwal, Shreekant Gawande, Satoshi Nishimoto, Jeroen van den Brink, Sanjeev Kumar

Abstract: Using a combination of the mean-field Bogoliubov deGennes (BdG) approach and the Density Matrix Renormalization Group (DMRG) method, we discover first order topological transitions between topological superconducting and trivial insulating phases in a sawtooth lattice of inter-site attractive fermions. Topological characterization of different phases is achieved in terms of winding numbers, Majora… ▽ More Using a combination of the mean-field Bogoliubov deGennes (BdG) approach and the Density Matrix Renormalization Group (DMRG) method, we discover first order topological transitions between topological superconducting and trivial insulating phases in a sawtooth lattice of inter-site attractive fermions. Topological characterization of different phases is achieved in terms of winding numbers, Majorana edge modes and entanglement spectra. By studying the effect of disorder on the first order topological phase transitions, we establish the disorder-induced topological phase coexistence as a mechanism for generating a finite density of Majorana particles. △ Less

Submitted 13 April, 2022; originally announced April 2022.

Comments: Supplemental material included

Quantum Fisher Information Perspective on Sensing in Anti-PT Symmetric Systems

Authors: J. Wang, D. Mukhopadhyay, G. S. Agarwal

Abstract: The efficient sensing of weak environmental perturbations via special degeneracies called exceptional points in non-Hermitian systems has gained enormous traction in the last few decades. However, in contrast to the extensive literature on parity-time (PT) symmetric systems, the exotic hallmarks of anti-PT symmetric systems are only beginning to be realized now. Very recently, a characteristic res… ▽ More The efficient sensing of weak environmental perturbations via special degeneracies called exceptional points in non-Hermitian systems has gained enormous traction in the last few decades. However, in contrast to the extensive literature on parity-time (PT) symmetric systems, the exotic hallmarks of anti-PT symmetric systems are only beginning to be realized now. Very recently, a characteristic resonance of vanishing linewidth in anti-PT symmetric systems was shown to exhibit tremendous sensitivity to intrinsic nonlinearities. Given the primacy of sensing in non-Hermitian systems, in general, and the immense topicality of anti-PT symmetry, we investigate the statistical bound to the measurement sensitivity for any arbitrary perturbation in a dissipatively coupled, anti-PT symmetric system. Using the framework of quantum Fisher information and the long-time solution to the full master equation, we analytically compute the Cramer-Rao bound for the system properties like the detunings and the couplings. As an illustrative example of this formulation, we inspect and reaffirm the role of a long-lived resonance in dissipatively interacting systems for sensing applications. \end{abstract} △ Less

Submitted 14 October, 2021; originally announced October 2021.

Comments: 6 pages, 1 figure

Report number: Phys. Rev. Research 4, 013131

Gap Statistics for Confined Particles with Power-Law Interactions

Authors: Saikat Santra, Jitendra Kethepalli, Sanaa Agarwal, Abhishek Dhar, Manas Kulkarni, Anupam Kundu

Abstract: We consider the $N$ particle classical Riesz gas confined in a one-dimensional external harmonic potential with power law interaction of the form $1/r^k$ where $r$ is the separation between particles. As special limits it contains several systems such as Dyson's log-gas ($k\to 0^+$), Calogero-Moser model ($k=2$), 1d one component plasma ($k=-1$) and the hard-rod gas ($k\to \infty$). Despite its gr… ▽ More We consider the $N$ particle classical Riesz gas confined in a one-dimensional external harmonic potential with power law interaction of the form $1/r^k$ where $r$ is the separation between particles. As special limits it contains several systems such as Dyson's log-gas ($k\to 0^+$), Calogero-Moser model ($k=2$), 1d one component plasma ($k=-1$) and the hard-rod gas ($k\to \infty$). Despite its growing importance, only large-$N$ field theory and average density profile are known for general $k$. In this Letter, we study the fluctuations in the system by looking at the statistics of the gap between successive particles. This quantity is analogous to the well-known level spacing statistics which is ubiquitous in several branches of physics. We show that the variance goes as $N^{-b_k}$ and we find the $k$ dependence of $b_k$ via direct Monte Carlo simulations. We provide supporting arguments based on microscopic Hessian calculation and a quadratic field theory approach. We compute the gap distribution and study its system size scaling. Except in the range $-1<k<0$, we find scaling for all $k>-2$ with both Gaussian and non-Gaussian scaling forms. △ Less

Submitted 16 May, 2022; v1 submitted 30 September, 2021; originally announced September 2021.

Comments: 13 pages, 11 figures

Journal ref: @article{year = 2022, month = {apr}, journal = {Physical Review Letters},Phys. Rev. Lett. 128, 170603}

Synthesizing five-body interaction in a superconducting quantum circuit

Authors: Ke Zhang, Hekang Li, Pengfei Zhang, Jiale Yuan, Jinyan Chen, Wenhui Ren, Zhen Wang, Chao Song, Da-Wei Wang, H. Wang, Shiyao Zhu, Girish S. Agarwal, Marlan O. Scully

Abstract: Synthesizing many-body interaction Hamiltonian is a central task in quantum simulation. However, it is challenging to synthesize interactions including more than two spins. Borrowing tools from quantum optics, we synthesize five-body spin-exchange interaction in a superconducting quantum circuit by simultaneously exciting four independent qubits with time-energy correlated photon quadruples genera… ▽ More Synthesizing many-body interaction Hamiltonian is a central task in quantum simulation. However, it is challenging to synthesize interactions including more than two spins. Borrowing tools from quantum optics, we synthesize five-body spin-exchange interaction in a superconducting quantum circuit by simultaneously exciting four independent qubits with time-energy correlated photon quadruples generated from a qudit. During the dynamic evolution of the five-body interaction, a Greenberger-Horne-Zeilinger state is generated in a single step with fidelity estimated to be $0.685$. We compare the influence of noise on the three-, four- and five-body interaction as a step toward answering the question on the quantum origin of chiral molecules. We also demonstrate a many-body Mach-Zehnder interferometer which potentially has a Heisenberg-limit sensitivity. This study paves a way for quantum simulation involving many-body interactions and high excited states of quantum circuits. △ Less

Submitted 1 September, 2021; originally announced September 2021.

Comments: 6 pages, 3 figures

Journal ref: Phys. Rev. Lett. 128, 190502 (2022)

Entangled Photons Enabled Time- and Frequency-Resolved Coherent Raman Spectroscopy in Condensed Phase Molecules

Authors: Zhedong Zhang, Tao Peng, Xiaoyu Nie, Girish S. Agarwal, Marlan O. Scully

Abstract: We develop an ultrafast frequency-resolved Raman spectroscopy with entangled photons for polyatomic molecules in condensed phases, to probe the electronic and vibrational coherences. Using quantum correlation between the photons, the signal shows the capability of both temporal and spectral resolutions that are not accessible by either classical pulses or the fields without entanglement. We develo… ▽ More We develop an ultrafast frequency-resolved Raman spectroscopy with entangled photons for polyatomic molecules in condensed phases, to probe the electronic and vibrational coherences. Using quantum correlation between the photons, the signal shows the capability of both temporal and spectral resolutions that are not accessible by either classical pulses or the fields without entanglement. We develop a microscopic theory for this Raman spectroscopy, revealing the electronic coherence dynamics which often shows a rapid decay within $\sim$50fs. The heterodyne-detected Raman signal is further developed to capture the phases of electronic coherence and emission in real-time domain. △ Less

Submitted 22 June, 2021; v1 submitted 21 June, 2021; originally announced June 2021.

Comments: 6 pages, 3 figures

Deciphering capacitance frequency technique for performance limiting defect state parameters in energy harvesting perovskites

Authors: Vikas Nandal, Sumanshu Agarwal, Pradeep R. Nair

Abstract: With emerging thin film PIN based optoelectronics devices, a significant research thrust is focused on the passivation of trap states for performance enhancement. Among various methods, capacitance frequency technique (CFT) is often employed to quantify trap state parameters, however, the trapped charge induced electrostatic effect on the same is not yet established for such devices. Herein, we pr… ▽ More With emerging thin film PIN based optoelectronics devices, a significant research thrust is focused on the passivation of trap states for performance enhancement. Among various methods, capacitance frequency technique (CFT) is often employed to quantify trap state parameters, however, the trapped charge induced electrostatic effect on the same is not yet established for such devices. Herein, we present a theoretical methodology to incorporate such effects in the CF characteristics of well-established carrier selective perovskite-based PIN devices. We show that the electrostatic effect of trapped charges leads to non-linear energy bands in perovskite layer which results in the underestimation of trap density from existing models of CFT. Consequently, a parabolic band approximation with effective length PBAEL model is developed which accurately predicts the trap density for shallow or deep states from CFT analysis. In addition, we demonstrate that the attempt to escape frequency, crucial for trapped charge dynamics with continuum energy bands, can be well extracted by eliminating non-linear effects at reduced perovskite thickness. We believe that our work provides a unified theoretical platform for CFT to extract trap state parameters for a broad class of organic and hybrid materials-based thin film devices for energy conversion applications such as solar cells, LEDs, etc. △ Less

Submitted 14 June, 2021; v1 submitted 13 June, 2021; originally announced June 2021.

$\mathcal{PT}$-symmetry breaking in a Kitaev chain with one pair of gain-loss potentials

Authors: Kaustubh S. Agarwal, Yogesh N. Joglekar

Abstract: Parity-time ($\mathcal{PT}$) symmetric systems are classical, gain-loss systems whose dynamics are governed by non-Hermitian Hamiltonians with exceptional-point (EP) degeneracies. The eigenvalues of a $\mathcal{PT}$-symmetric Hamiltonian change from real to complex conjugates at a critical value of gain-loss strength that is called the $\mathcal{PT}$ breaking threshold. Here, we obtain the… ▽ More Parity-time ($\mathcal{PT}$) symmetric systems are classical, gain-loss systems whose dynamics are governed by non-Hermitian Hamiltonians with exceptional-point (EP) degeneracies. The eigenvalues of a $\mathcal{PT}$-symmetric Hamiltonian change from real to complex conjugates at a critical value of gain-loss strength that is called the $\mathcal{PT}$ breaking threshold. Here, we obtain the $\mathcal{PT}$-threshold for a one-dimensional, finite Kitaev chain -- a prototype for a p-wave superconductor -- in the presence of a single pair of gain and loss potentials as a function of the superconducting order parameter, on-site potential, and the distance between the gain and loss sites. In addition to a robust, non-local threshold, we find a rich phase diagram for the threshold that can be qualitatively understood in terms of the band-structure of the Hermitian Kitaev mo del. In particular, for an even chain with zero on-site potential, we find a re-entrant $\mathcal{PT}$-symmetric phase bounded by second-order EP contours. Our numerical results are supplemented by analytical calculations for small system sizes. △ Less

Submitted 11 March, 2021; originally announced March 2021.

Comments: 8 pages, 6 figures

Journal ref: Phys. Rev. A 104, 022218 (2021)

Predicting the Characteristics of Defect Transitions on Curved Surfaces

Authors: Siddhansh Agarwal, Sascha Hilgenfeldt

Abstract: The energetically optimal position of lattice defects on intrinsically curved surfaces is a complex function of shape parameters. For open surfaces, a simple condition predicts the critical size for which a central disclination yields lower energy than a boundary disclination. In practice, this transition is modified by activation energies or more favorable intermediate defect positions. Here it i… ▽ More The energetically optimal position of lattice defects on intrinsically curved surfaces is a complex function of shape parameters. For open surfaces, a simple condition predicts the critical size for which a central disclination yields lower energy than a boundary disclination. In practice, this transition is modified by activation energies or more favorable intermediate defect positions. Here it is shown that these transition characteristics (continuous or discontinuous, first or second order) can also be inferred from analytical, general criteria evaluated from the surface shape. A universal scale of activation energy is found, and the criterion is generalized to predict transition order as symmetries such as that of the shape are broken. The results give practical insight into structural transitions to disorder in many cellular materials of technological and biological importance. △ Less

Submitted 14 February, 2021; originally announced February 2021.

Efficacy of simple continuum models for diverse granular intrusions

Authors: Shashank Agarwal, Andras Karsai, Daniel I Goldman, Ken Kamrin

Abstract: Granular intrusion is commonly observed in natural and human-made settings. Unlike typical solids and fluids, granular media can simultaneously display fluid-like and solid-like characteristics in a variety of intrusion scenarios. This multi-phase behavior increases the difficulty of accurately modeling these and other yielding (or flowable) materials. Micro-scale modeling methods, such as DEM (Di… ▽ More Granular intrusion is commonly observed in natural and human-made settings. Unlike typical solids and fluids, granular media can simultaneously display fluid-like and solid-like characteristics in a variety of intrusion scenarios. This multi-phase behavior increases the difficulty of accurately modeling these and other yielding (or flowable) materials. Micro-scale modeling methods, such as DEM (Discrete Element Method), capture this behavior by modeling the media at the grain scale, but there is often interest in the macro-scale characterizations of such systems. We examine the efficacy of a macro-scale continuum approach in modeling and understanding the physics of various macroscopic phenomena in a variety of granular intrusion cases using two basic frictional yielding constitutive models. We compare predicted granular force response and material flow to experimental data in four quasi-2D intrusion cases: (1) depth-dependent force response in horizontal submerged-intruder motion; (2) separation dependent drag variation in parallel-plate vertical-intrusion; (3) initial-density-dependent drag fluctuations in free surface plowing, and (4) flow zone development during vertical plate intrusions in under-compacted granular media. Our continuum modeling approach captures the flow process and drag forces while providing key meso- and macro-scopic insights. The modeling results are then compared to experimental data. Our study highlights how continuum modeling approaches provide an alternative for efficient modeling as well as a conceptual understanding of various granular intrusion phenomena. △ Less

Submitted 15 July, 2021; v1 submitted 25 January, 2021; originally announced January 2021.

Comments: 14 pages, 8 figures, and 4 movies

A Chirality-Based Quantum Leap

Authors: Clarice D. Aiello, Muneer Abbas, John M. Abendroth, Andrei Afanasev, Shivang Agarwal, Amartya S. Banerjee, David N. Beratan, Jason N. Belling, Bertrand Berche, Antia Botana, Justin R. Caram, Giuseppe Luca Celardo, Gianaurelio Cuniberti, Aitzol Garcia-Etxarri, Arezoo Dianat, Ismael Diez-Perez, Yuqi Guo, Rafael Gutierrez, Carmen Herrmann, Joshua Hihath, Suneet Kale, Philip Kurian, Ying-Cheng Lai, Alexander Lopez, Ernesto Medina , et al. (19 additional authors not shown)

Abstract: Chiral degrees of freedom occur in matter and in electromagnetic fields and constitute an area of research that is experiencing renewed interest driven by recent observations of the chiral-induced spin selectivity (CISS) effect in chiral molecules and engineered nanomaterials. The CISS effect underpins the fact that charge transport through nanoscopic chiral structures favors a particular electron… ▽ More Chiral degrees of freedom occur in matter and in electromagnetic fields and constitute an area of research that is experiencing renewed interest driven by recent observations of the chiral-induced spin selectivity (CISS) effect in chiral molecules and engineered nanomaterials. The CISS effect underpins the fact that charge transport through nanoscopic chiral structures favors a particular electronic spin orientation, resulting in large room-temperature spin polarizations. Observations of the CISS effect suggest opportunities for spin control and for the design and fabrication of room-temperature quantum devices from the bottom up, with atomic-scale precision. Any technology that relies on optimal charge transport, including quantum devices for logic, sensing, and storage, may benefit from chiral quantum properties. These properties can be theoretically and experimentally investigated from a quantum information perspective, which is presently lacking. There are uncharted implications for the quantum sciences once chiral couplings can be engineered to control the storage, transduction, and manipulation of quantum information. This forward-looking perspective provides a survey of the experimental and theoretical fundamentals of chiral-influenced quantum effects, and presents a vision for their future roles in enabling room-temperature quantum technologies. △ Less

Submitted 11 November, 2021; v1 submitted 31 August, 2020; originally announced September 2020.

Nonlinear Spin Currents

Authors: Jayakrishnan M. P. Nair, Zhedong Zhang, Marlan O. Scully, Girish S. Agarwal

Abstract: The cavity mediated spin current between two ferrite samples has been reported by Bai et. al. [Phys. Rev. Lett. 118, 217201 (2017)]. This experiment was done in the linear regime of the interaction in the presence of external drive. In the current paper we develop a theory for the spin current in the nonlinear domain where the external drive is strong so that one needs to include the Kerr nonlinea… ▽ More The cavity mediated spin current between two ferrite samples has been reported by Bai et. al. [Phys. Rev. Lett. 118, 217201 (2017)]. This experiment was done in the linear regime of the interaction in the presence of external drive. In the current paper we develop a theory for the spin current in the nonlinear domain where the external drive is strong so that one needs to include the Kerr nonlinearity of the ferrite materials. In this manner the nonlinear polaritons are created and one can reach both bistable and multistable behavior of the spin current. The system is driven into a far from equilibrium steady state which is determined by the details of driving field and various interactions. We present a variety of steady state results for the spin current. A spectroscopic detection of the nonlinear spin current is developed, revealing the key properties of the nonlinear polaritons. The transmission of a weak probe is used to obtain quantitative information on the multistable behavior of the spin current. The results and methods that we present are quite generic and can be used in many other contexts where cavities are used to transfer information from one system to another, e.g., two different molecular systems. △ Less

Submitted 26 May, 2020; originally announced May 2020.

Comments: 8 pages, 8 figures

Journal ref: Phys. Rev. B 102, 104415 (2020)

Surprising simplicity in the modeling of dynamic granular intrusion

Authors: Shashank Agarwal, Andras Karsai, Daniel I Goldman, Ken Kamrin

Abstract: Granular intrusions, such as dynamic impact or wheel locomotion, are complex multiphase phenomena where the grains exhibit solid-like and fluid-like characteristics together with an ejected gas-like phase. Despite decades of modeling efforts, a unified description of the physics in such intrusions is as yet unknown. Here we show that a continuum model based on the simple notions of frictional flow… ▽ More Granular intrusions, such as dynamic impact or wheel locomotion, are complex multiphase phenomena where the grains exhibit solid-like and fluid-like characteristics together with an ejected gas-like phase. Despite decades of modeling efforts, a unified description of the physics in such intrusions is as yet unknown. Here we show that a continuum model based on the simple notions of frictional flow and tension-free separation describes complex granular intrusions near free surfaces. This model captures dynamics in a variety of experiments including wheel locomotion, plate intrusions, and running legged robots. The model reveals that three effects (a static contribution and two dynamic ones) primarily give rise to intrusion forces in such scenarios. Identification of these effects enables the development of a further reduced-order technique (Dynamic Resistive Force Theory) for rapid modeling of granular locomotion of arbitrarily shaped intruders. The continuum-motivated strategy we propose for identifying physical mechanisms and corresponding reduced-order relations has potential use for a variety of other materials. △ Less

Submitted 21 January, 2021; v1 submitted 21 May, 2020; originally announced May 2020.

Comments: 41 pages including supplementary document, 10 figures, and 8 video

Light-driven permanent transition from insulator to conductor in Ga2O3

Authors: F. A. Selim, D. Rana, S. Agarwal, M. Islam, A. Banerjee, B. P. Uberuaga, P. Saadatkia, P. Dulal, N. Adhikari, M. Butterling, M. O. Liedke, A. Wagner

Abstract: The transition from insulator to conductor can be achieved in some materials but requires modification of both the arrangement of atoms and their electronic configurations. This is often achieved by doping. Here we reveal a mechanism the lattice may adopt to induce such a transition. We show that limited exposure to sub-bandgap light caused a permanent transition from an insulator state to a condu… ▽ More The transition from insulator to conductor can be achieved in some materials but requires modification of both the arrangement of atoms and their electronic configurations. This is often achieved by doping. Here we reveal a mechanism the lattice may adopt to induce such a transition. We show that limited exposure to sub-bandgap light caused a permanent transition from an insulator state to a conductor state in the insulating oxide Ga2O3 with 9-orders of magnitude increase in electronic conduction. Photoexcitation modifies the charge state of an O-vacancy and the redistribution of the localized electrons, leading to a massive structural distortion in the lattice that is shown to be the underlying mechanism. It modifies density of states and introduces new stable states with shallower energy levels, leading to this intriguing behavior. We suggest that this mechanism may occur in other wide bandgap metal oxides leading to drastic modification in their electronic properties. △ Less

Submitted 22 March, 2020; originally announced March 2020.

Comments: 24 pages, 10 figures

A simple, general criterion for onset of disclination disorder on curved surfaces

Authors: Siddhansh Agarwal, Sascha Hilgenfeldt

Abstract: Determining the positions of lattice defects on elastic surfaces with Gaussian curvature is a non-trivial task of mechanical energy optimization, particularly for surfaces with boundaries. We introduce a simple way to predict the onset of disclination disorder from the shape of bounded surfaces. The criterion fixes the value of a weighted integral Gaussian curvature to a universal constant and pro… ▽ More Determining the positions of lattice defects on elastic surfaces with Gaussian curvature is a non-trivial task of mechanical energy optimization, particularly for surfaces with boundaries. We introduce a simple way to predict the onset of disclination disorder from the shape of bounded surfaces. The criterion fixes the value of a weighted integral Gaussian curvature to a universal constant and proves accurate across a great variety of shapes, even when previously suggested criteria fail. It is an easy avenue to improved understanding of the limitations to crystalline order in many materials. △ Less

Submitted 17 March, 2020; originally announced March 2020.

Journal ref: Phys. Rev. Lett. 125, 078003 (2020)

Harmonically confined particles with long-range repulsive interactions

Authors: Sanaa Agarwal, Abhishek Dhar, Manas Kulkarni, Anupam Kundu, Satya N. Majumdar, David Mukamel, Gregory Schehr

Abstract: We study an interacting system of $N$ classical particles on a line at thermal equilibrium. The particles are confined by a harmonic trap and repelling each other via pairwise interaction potential that behaves as a power law $\propto \sum_{\substack{i\neq j}}^N|x_i-x_j|^{-k}$ (with $k>-2$) of their mutual distance. This is a generalization of the well known cases of the one component plasma (… ▽ More We study an interacting system of $N$ classical particles on a line at thermal equilibrium. The particles are confined by a harmonic trap and repelling each other via pairwise interaction potential that behaves as a power law $\propto \sum_{\substack{i\neq j}}^N|x_i-x_j|^{-k}$ (with $k>-2$) of their mutual distance. This is a generalization of the well known cases of the one component plasma ($k=-1$), Dyson's log-gas ($k\to 0^+$), and the Calogero-Moser model ($k=2$). Due to the competition between harmonic confinement and pairwise repulsion, the particles spread over a finite region of space for all $k>-2$. We compute exactly the average density profile for large $N$ for all $k>-2$ and show that while it is independent of temperature for sufficiently low temperature, it has a rich and nontrivial dependence on $k$ with distinct behavior for $-2<k<1$, $k>1$ and $k=1$. △ Less

Submitted 22 July, 2019; originally announced July 2019.

Comments: Main text: 6 pages + 1 Fig., Supp. Mat.: 11 pages + 3 Figs. Accepted for publication in Physical Review Letters

Journal ref: Phys. Rev. Lett. 123, 100603 (2019)

Some connections between the Classical Calogero-Moser model and the Log Gas

Authors: Sanaa Agarwal, Manas Kulkarni, Abhishek Dhar

Abstract: In this work we discuss connections between a one-dimensional system of $N$ particles interacting with a repulsive inverse square potential and confined in a harmonic potential (Calogero-Moser model) and the log-gas model which appears in random matrix theory. Both models have the same minimum energy configuration, with the particle positions given by the zeros of the Hermite polynomial. Moreover,… ▽ More In this work we discuss connections between a one-dimensional system of $N$ particles interacting with a repulsive inverse square potential and confined in a harmonic potential (Calogero-Moser model) and the log-gas model which appears in random matrix theory. Both models have the same minimum energy configuration, with the particle positions given by the zeros of the Hermite polynomial. Moreover, the Hessian describing small oscillations around equilibrium are also related for the two models. The Hessian matrix of the Calogero-Moser model is the square of that of the log-gas. We explore this connection further by studying finite temperature equilibrium properties of the two models through Monte-Carlo simulations. In particular, we study the single particle distribution and the marginal distribution of the boundary particle which, for the log-gas, are respectively given by the Wigner semi-circle and the Tracy-Widom distribution. For particles in the bulk, where typical fluctuations are Gaussian, we find that numerical results obtained from small oscillation theory are in very good agreement with the Monte-Carlo simulation results for both the models. For the log-gas, our findings agree with rigorous results from random matrix theory. △ Less

Submitted 22 March, 2019; originally announced March 2019.

Comments: 23 pages, 11 figures

Modeling of the interaction of rigid wheels with dry granular media

Authors: Shashank Agarwal, Carmine Senatore, Tingnan Zhang, Mark Kingsbury, Karl Iagnemma, Daniel I. Goldman, Ken Kamrin

Abstract: We analyze the capabilities of various recently developed techniques, namely Resistive Force Theory (RFT) and continuum plasticity implemented with the Material Point Method (MPM), in capturing dynamics of wheel--dry granular media interactions. We compare results to more conventionally accepted methods of modeling wheel locomotion. While RFT is an empirical force model for arbitrarily-shaped bodi… ▽ More We analyze the capabilities of various recently developed techniques, namely Resistive Force Theory (RFT) and continuum plasticity implemented with the Material Point Method (MPM), in capturing dynamics of wheel--dry granular media interactions. We compare results to more conventionally accepted methods of modeling wheel locomotion. While RFT is an empirical force model for arbitrarily-shaped bodies moving through granular media, MPM-based continuum modeling allows the simulation of full granular flow and stress fields. RFT allows for rapid evaluation of interaction forces on arbitrary shaped intruders based on a local surface stress formulation depending on depth, orientation, and movement of surface elements. We perform forced-slip experiments for three different wheel types and three different granular materials, and results are compared with RFT, continuum modeling, and a traditional terramechanics semi-empirical method. Results show that for the range of inputs considered, RFT can be reliably used to predict rigid wheel granular media interactions with accuracy exceeding that of traditional terramechanics methodology in several circumstances. Results also indicate that plasticity-based continuum modeling provides an accurate tool for wheel-soil interaction while providing more information to study the physical processes giving rise to resistive stresses in granular media. △ Less

Submitted 29 January, 2019; originally announced January 2019.

Using Floating Gate Memory to Train Ideal Accuracy Neural Networks

Authors: Sapan Agarwal, Diana Garland, John Niroula, Robin B, Jacobs-Gedrim, Alex Hsia, Michael S. Van Heukelom, Elliot Fuller, Bruce Draper, Matthew J. Marinella

Abstract: Floating gate SONOS (Silicon-Oxygen-Nitrogen-Oxygen-Silicon) transistors can be used to train neural networks to ideal accuracies that match those of floating point digital weights on the MNIST dataset when using multiple devices to represent a weight or within 1% of ideal accuracy when using a single device. This is enabled by operating devices in the subthreshold regime, where they exhibit symme… ▽ More Floating gate SONOS (Silicon-Oxygen-Nitrogen-Oxygen-Silicon) transistors can be used to train neural networks to ideal accuracies that match those of floating point digital weights on the MNIST dataset when using multiple devices to represent a weight or within 1% of ideal accuracy when using a single device. This is enabled by operating devices in the subthreshold regime, where they exhibit symmetric write nonlinearities. A neural training accelerator core based on SONOS with a single device per weight would increase energy efficiency by 120X, operate 2.1X faster and require 5X lower area than an optimized SRAM based ASIC. △ Less

Submitted 27 February, 2019; v1 submitted 29 January, 2019; originally announced January 2019.

Combining DFT with ML to study size specific interactions between metal clusters and adsorbates

Authors: Shweta Mehta, Sheena Agarwal, Kavita Joshi

Abstract: To date, density functional theory (DFT) is one of the most accurate and yet practical theory to gain insight about materials properties. Although successful, the computational cost is the main hurdle even today. A way out is combining DFT with machine learning (ML) to reduce the computational cost without compromising accuracy. However, the success of this approach hinges on the correctness of th… ▽ More To date, density functional theory (DFT) is one of the most accurate and yet practical theory to gain insight about materials properties. Although successful, the computational cost is the main hurdle even today. A way out is combining DFT with machine learning (ML) to reduce the computational cost without compromising accuracy. However, the success of this approach hinges on the correctness of the descriptors. In the present work, we demonstrate that, based on {\it only} interatomic distances as descriptors, our ML model predicts interaction energy between an adsorbate and Al cluster with absolute mean error (AME) $\sim$ 0.05 eV (or less) and reproduces the PES experienced by an incoming atom. Our extensive DFT calculations reveal that atoms experiencing identical environment within a cluster have identical interaction energy patterns. Further, we demonstrate that our model is not specific to Al clusters, and could be applied to clusters of different elements as well. Its application to compute PES experienced by various test atoms and molecules in the vicinity of different clusters proves the transferability of the model not just to clusters of different elements but also to various molecules. The descriptors chosen are invariant to rotation, translation, and permutation yet very simple to compute is one of the most crucial points of the present work. △ Less

Submitted 18 April, 2019; v1 submitted 12 December, 2018; originally announced December 2018.

Squeezed states of magnons and phonons in cavity magnomechanics

Authors: Jie Li, Shi-Yao Zhu, G. S. Agarwal

Abstract: We show how to create quantum squeezed states of magnons and phonons in a cavity magnomechanical system. The magnons are embodied by a collective motion of a large number of spins in a macroscopic ferrimagnet, and couple to cavity microwave photons and phonons (vibrational modes of the ferrimagnet) via the magnetic dipole interaction and magnetostrictive interaction, respectively. The cavity is dr… ▽ More We show how to create quantum squeezed states of magnons and phonons in a cavity magnomechanical system. The magnons are embodied by a collective motion of a large number of spins in a macroscopic ferrimagnet, and couple to cavity microwave photons and phonons (vibrational modes of the ferrimagnet) via the magnetic dipole interaction and magnetostrictive interaction, respectively. The cavity is driven by a weak squeezed vacuum field generated by a flux-driven Josephson parametric amplifier, which is essential to get squeezed states of the magnons and phonons. We show that the magnons can be prepared in a squeezed state via the cavity-magnon beamsplitter interaction, and by further driving the magnon mode with a strong red-detuned microwave field, the phonons are squeezed. We show optimal parameter regimes for obtaining large squeezing of the magnons and phonons, which are robust against temperature and could be realized with experimentally reachable parameters. △ Less

Submitted 12 February, 2019; v1 submitted 20 November, 2018; originally announced November 2018.

Comments: initially submitted to and accepted by PRA Rapid Comm

Journal ref: Phys. Rev. A 99, 021801 (2019)

Quantum fluctuations in Fröhlich condensate of molecular vibrations driven far from equilibrium

Authors: Zhedong Zhang, Girish S. Agarwal, Marlan O. Scully

Abstract: Fröhlich discovered the remarkable condensation of polar vibrations into the lowest frequency mode when the system is pumped externally. For a full understanding of the Fröhlich condensate one needs to go beyond the mean field level to describe critical behavior as well as quantum fluctuations. The energy redistribution among vibrational modes with nonlinearity included is shown to be essential fo… ▽ More Fröhlich discovered the remarkable condensation of polar vibrations into the lowest frequency mode when the system is pumped externally. For a full understanding of the Fröhlich condensate one needs to go beyond the mean field level to describe critical behavior as well as quantum fluctuations. The energy redistribution among vibrational modes with nonlinearity included is shown to be essential for realizing the condensate and the phonon-number distribution, revealing the transition from quasi-thermal to super-Poissonian statistics with the pump. We further study the spectroscopic properties of the Fröhlich condensate, which are especially revealed by the narrow linewidth. This gives the long-lived coherence and the collective motion of the condensate. Finally we show that the proteins such as Bovine Serum Albumin (BSA) and lysozyme are most likely the candidates for observing such collective modes in THz regime by means of Raman or infrared (IR) spectroscopy. △ Less

Submitted 17 October, 2018; originally announced October 2018.

Comments: 5 pages, 4 figures + 8 pages Supplementary Material

Journal ref: Phys. Rev. Lett. 122, 158101 (2019)

Magnon-photon-phonon entanglement in cavity magnomechanics

Authors: Jie Li, Shi-Yao Zhu, G. S. Agarwal

Abstract: We show how to generate tripartite entanglement in a cavity magnomechanical system which consists of magnons, cavity microwave photons, and phonons. The magnons are embodied by a collective motion of a large number of spins in a macroscopic ferrimagnet, and are driven directly by an electromagnetic field. The cavity photons and magnons are coupled via magnetic dipole interaction, and the magnons a… ▽ More We show how to generate tripartite entanglement in a cavity magnomechanical system which consists of magnons, cavity microwave photons, and phonons. The magnons are embodied by a collective motion of a large number of spins in a macroscopic ferrimagnet, and are driven directly by an electromagnetic field. The cavity photons and magnons are coupled via magnetic dipole interaction, and the magnons and phonons are coupled via magnetostrictive (radiation pressure-like) interaction. We show optimal parameter regimes for achieving the tripartite entanglement where magnons, cavity photons, and phonons are entangled with each other, and we further prove that the steady state of the system is a genuinely tripartite entangled state. The entanglement is robust against temperature. Our results indicate that cavity magnomechanical systems could provide a promising platform for the study of macroscopic quantum phenomena. △ Less

Submitted 23 October, 2018; v1 submitted 18 July, 2018; originally announced July 2018.

Comments: version of Main text plus Supp. Mat. To appear in PRL

Journal ref: Phys. Rev. Lett. 121, 203601 (2018)

Generation and detection of non-Gaussian phonon-added coherent states in optomechanical systems

Authors: Jie Li, Simon Gröblacher, Shi-Yao Zhu, G. S. Agarwal

Abstract: Adding excitations on a coherent state provides an effective way to observe nonclassical properties of radiation fields. Here we describe and analyse how to apply this concept to the motional state of a mechanical oscillator and present a full scheme to prepare non-Gaussian {\it phonon}-added coherent states of the mechanical motion in cavity optomechanics. We first generate a mechanical coherent… ▽ More Adding excitations on a coherent state provides an effective way to observe nonclassical properties of radiation fields. Here we describe and analyse how to apply this concept to the motional state of a mechanical oscillator and present a full scheme to prepare non-Gaussian {\it phonon}-added coherent states of the mechanical motion in cavity optomechanics. We first generate a mechanical coherent state using electromagnetically induced transparency. We then add a single phonon onto the coherent state via optomechanical parametric down-conversion combined with single photon detection. We validate this single-phonon-added coherent state by using a red-detuned beam and reading out the state of the optical output field. This approach allows us to verify nonclassical properties of the phonon state, such as sub-Poissonian character and quadrature squeezing. We further show that our scheme can be directly implemented using existing devices, and is generic in nature and hence applicable to a variety of systems in opto- and electromechanics. △ Less

Submitted 18 June, 2018; v1 submitted 18 March, 2018; originally announced March 2018.

Comments: slightly extended main text, Supp. Mat. as in v2. to appear in PRA Rapid Comm

Journal ref: Phys. Rev. A 98, 011801 (2018)

Strong Coupling of Collection of Emitters on Hyperbolic Meta-Material

Authors: Svend-Age Biehs, Chenran Xu, Girish S. Agarwal

Abstract: Recently considerable effort is devoted to the realization of the strong coupling regime of the radiation matter interaction in the context of emitter at a meta surface. The strong interaction is well realized in cavity quantum electrodynamics which also shows that the strong coupling is much easier to realize using a collection of emitters. Keeping this in mind we study if emitters on a hyperboli… ▽ More Recently considerable effort is devoted to the realization of the strong coupling regime of the radiation matter interaction in the context of emitter at a meta surface. The strong interaction is well realized in cavity quantum electrodynamics which also shows that the strong coupling is much easier to realize using a collection of emitters. Keeping this in mind we study if emitters on a hyperbolic meta materials can yield strong coupling regime. We show that the strong coupling can be realized for densities of emitters exceeding a critical value. A way to detect the strong coupling between emitters and a hyperbolic metamaterials is to use the Kretschman-Raether configuration. The strong coupling appears as the splitting of the re ectivity dip. In the weak coupling regime the dip position shifts. The shift and splitting can be used to sense active molecules at surfaces. △ Less

Submitted 28 February, 2018; v1 submitted 25 October, 2017; originally announced October 2017.

Comments: Typos in Eqs. (5), (6) and (9) have been corrected

Journal ref: J. Opt. 20, 045601(2018)

Entropy of the BEC Ground State: Correlation vs Ground State Entropy

Authors: Moochan B. Kim, Anatoly Svidzinsky, Girish S. Agarwal, Marlan O. Scully

Abstract: Calculation of the entropy of an ideal Bose Einstein Condensate (BEC) in a three dimensional trap reveals unusual, previously unrecognized, features of the Canonical Ensemble. It is found that, for any temperature, the entropy of the Bose gas is equal to the entropy of the excited particles although the entropy of the particles in the ground state is nonzero. We explain this by considering the cor… ▽ More Calculation of the entropy of an ideal Bose Einstein Condensate (BEC) in a three dimensional trap reveals unusual, previously unrecognized, features of the Canonical Ensemble. It is found that, for any temperature, the entropy of the Bose gas is equal to the entropy of the excited particles although the entropy of the particles in the ground state is nonzero. We explain this by considering the correlations between the ground state particles and particles in the excited states. These correlations lead to a correlation entropy which is exactly equal to the contribution from the ground state. The correlations themselves arise from the fact that we have a fixed number of particles obeying quantum statistics. We present results for correlation functions between the ground and excited states in Bose gas, so to clarify the role of fluctuations in the system. We also report the sub-Poissonian nature of the ground state fluctuations. △ Less

Submitted 23 August, 2017; originally announced August 2017.

Comments: 9 pages, 4 figures and 1 table

Journal ref: Phys. Rev. A 97, 013605 (2018)

The New Phase due to Symmetry Protected Piecewise Berry Phases; Enhanced Pumping and Non-reciprocity in Trimer Lattices

Authors: Xuele Liu, G. S. Agarwal

Abstract: Finding new phase is a fundamental task in physics. Landau's theory explained the deep connection between symmetry breaking and phase transition commonly occurring in magnetic, superconducting and super uid systems. The discovery of the quantum Hall effect led to Z topological phases which could be different for same symmetry and are characterized by the discrete values of the Berry phases. By stu… ▽ More Finding new phase is a fundamental task in physics. Landau's theory explained the deep connection between symmetry breaking and phase transition commonly occurring in magnetic, superconducting and super uid systems. The discovery of the quantum Hall effect led to Z topological phases which could be different for same symmetry and are characterized by the discrete values of the Berry phases. By studying 1D trimer lattices we report new phases characterized by Berry phases which are piecewise continuous rather than discrete numbers. The phase transition occurs at the discontinuity point. With time-dependent changes, trimer lattices also give a 2D phases characterized by very specific 2D Berry phases of half period. These Berry phases change smoothly within a phase while change discontinuously at the transition point. We further demonstrate the existence of adiabatic pumping for each phase and gain assisted enhanced pumping. The non-reciprocity of the pumping process makes the system a good optical diode. △ Less

Submitted 15 September, 2016; v1 submitted 7 September, 2016; originally announced September 2016.

Comments: 12pages, 7figures

Journal ref: Scientific Reports 7, 45015 (2017)

Long-Range Dipole-Dipole Interaction and Anomalous Förster Energy Transfer across Hyperbolic Meta Material

Authors: S. -A. Biehs, V. M. Menon, G. S. Agarwal

Abstract: We study radiative energy transfer between a donor-acceptor pair across a hyperbolic metamaterial slab. We show that similar to a perfect lens a hyperbolic lens allows for giant energy transfer rates. For a realistic realization of a hyperbolic multilayer metamaterial we find an enhancement of up to three orders of magnitude with respect to the transfer rates across a plasmonic silver film of the… ▽ More We study radiative energy transfer between a donor-acceptor pair across a hyperbolic metamaterial slab. We show that similar to a perfect lens a hyperbolic lens allows for giant energy transfer rates. For a realistic realization of a hyperbolic multilayer metamaterial we find an enhancement of up to three orders of magnitude with respect to the transfer rates across a plasmonic silver film of the same size especially for frequencies which coincide with the epsilon-near zero and the epsilonnear pole frequencies. Furthermore, we compare exact results based on the S-matrix method with results obtained from effective medium theory. Our finding of very large dipole-dipole interaction at distances of the order of a wavelength has important consequences for producing radiative heat transfer, quantum entanglement etc. △ Less

Submitted 19 February, 2016; originally announced February 2016.

Journal ref: Phys. Rev. B 93, 245439 (2016)

Structural, Magnetic and Magneto-caloric studies of Ni50Mn30Sn20Shape Memory Alloy

Authors: Ramesh Chandra Bhatt, R. S. Meena, H. Kishan, V. P. S. Awana, S. K. Agarwal

Abstract: We have synthesized a nominal composition of Ni50Mn30Sn20 alloy using arc melting technique. Rietveld refinement confirms the austenite L21 structure in Fm-3m space group. Electrical resistivity has been found to clearly exhibiting two different phenomena viz. a magnetic transition from paramagnetic to ferromagnetic and a structural transition from austenite to martensitic phase. Thermo-magnetizat… ▽ More We have synthesized a nominal composition of Ni50Mn30Sn20 alloy using arc melting technique. Rietveld refinement confirms the austenite L21 structure in Fm-3m space group. Electrical resistivity has been found to clearly exhibiting two different phenomena viz. a magnetic transition from paramagnetic to ferromagnetic and a structural transition from austenite to martensitic phase. Thermo-magnetization measurements M(T) confirms ferromagnetic transition temperature TC at 222 K and martensitic transition starting at 127 K(MS). Magnetization measurement M(H) at 10 K confirms the ferromagnetic state. Frequency dependence of ac susceptibility \c{hi}' at low temperature suggests spin glass behavior in the system. The isothermal magnetic entropy change values have been found to be 1.14 J/Kg.K, 2.69 J/Kg.K and 3.9 J/Kg.K, with refrigeration capacities of 19.6 J/kg, 37.8 J/kg and 54.6 J/kg for the field change of 1, 2 and 3 Tesla respectively at 227 K. △ Less

Submitted 5 November, 2015; originally announced November 2015.

Comments: 16 pages text + Figs. Ni50Mn30Sn20 alloy: reasonable refrigeration capacity tunable to Room T

Exactly solvable $\mathcal{PT}$-symmetric models in two dimensions

Authors: Kaustubh S. Agarwal, Rajeev K. Pathak, Yogesh N. Joglekar

Abstract: Non-hermitian, $\mathcal{PT}$-symmetric Hamiltonians, experimentally realized in optical systems, accurately model the properties of open, bosonic systems with balanced, spatially separated gain and loss. We present a family of exactly solvable, two-dimensional, $\mathcal{PT}$ potentials for a non-relativistic particle confined in a circular geometry. We show that the $\mathcal{PT}$ symmetry thres… ▽ More Non-hermitian, $\mathcal{PT}$-symmetric Hamiltonians, experimentally realized in optical systems, accurately model the properties of open, bosonic systems with balanced, spatially separated gain and loss. We present a family of exactly solvable, two-dimensional, $\mathcal{PT}$ potentials for a non-relativistic particle confined in a circular geometry. We show that the $\mathcal{PT}$ symmetry threshold can be tuned by introducing a second gain-loss potential or its hermitian counterpart. Our results explicitly demonstrate that $\mathcal{PT}$ breaking in two dimensions has a rich phase diagram, with multiple re-entrant $\mathcal{PT}$ symmetric phases. △ Less

Submitted 4 October, 2015; originally announced October 2015.

Comments: 6 pages, 6 figures

Journal ref: EPL 115, 31003 (2015)

Generalized fluctuation theorems for classical systems

Authors: G. S. Agarwal, Sushanta Dattagupta

Abstract: Fluctuation theorems have a very special place in the study of non equilibrium dynamics of physical systems. The form in which it is used most extensively is the Gallavoti-Cohen Fluctuation Theorem which is in terms of the distribution of the work $p(W)/p(-W)=\exp(αW)$. We derive the general form of the fluctuation theorems for an arbitrary Gaussian Markov process and find conditions when the para… ▽ More Fluctuation theorems have a very special place in the study of non equilibrium dynamics of physical systems. The form in which it is used most extensively is the Gallavoti-Cohen Fluctuation Theorem which is in terms of the distribution of the work $p(W)/p(-W)=\exp(αW)$. We derive the general form of the fluctuation theorems for an arbitrary Gaussian Markov process and find conditions when the parameter $α$ becomes a universal parameter $1/kT$. As an application we consider fluctuation theorems for classical cyclotron motion of an electron in a parabolic potential. The motion of the electron is described by four coupled Langevin equations and thus is non-trivial. The generalized theorems are equally valid for non-equilibrium steady states. △ Less

Submitted 4 September, 2015; originally announced September 2015.

Journal ref: Phys. Rev. E 92, 052139 (2015)

Device Engineering of Perovskite Solar Cells to Achieve Near Ideal Efficiency

Authors: Sumanshu Agarwal, Pradeep R. Nair

Abstract: Despite the exciting recent research on perovskite based solar cells, the design space for further optimization and the practical limits of efficiency are not well known in the community. In this manuscript, we address these aspects through theoretical calculations and detailed numerical simulations. Here, we first provide the detailed balance limit efficiency in the presence of radiative and Auge… ▽ More Despite the exciting recent research on perovskite based solar cells, the design space for further optimization and the practical limits of efficiency are not well known in the community. In this manuscript, we address these aspects through theoretical calculations and detailed numerical simulations. Here, we first provide the detailed balance limit efficiency in the presence of radiative and Auger recombination. Then, using coupled optical and carrier transport simulations, we identify the physical mechanisms that contribute towards bias dependent carrier collection, and hence low fill factors of current perovskite based solar cells. Curiously, we find that while Auger recombination is not a dominant factor at the detailed balance limit, it plays a significant role in device level implementations. Surprisingly, our device designs indicate that it is indeed possible to achieve efficiency and fill factor greater than 25% and 85%, respectively - even in the presence of Auger recombination. △ Less

Submitted 13 August, 2015; v1 submitted 24 June, 2015; originally announced June 2015.

Journal ref: Appl. Phys. Lett. 107, 123901 (2015)

Molecular mechanisms, thermodynamics, and dissociation kinetics of knob-hole interactions in fibrin

Authors: Olga Kononova, Rustem I. Litvinov, Artem Zhmurov, Andrey Alekseenko, Chai-Ho Cheng, Silvi Agarwal, Kenneth A. Marx, John W. Weisel, Valeri Barsegov

Abstract: Polymerization of fibrin, the primary structural protein of blood clots and thrombi, occurs through binding of knobs 'A' and 'B' in the central nodule of fibrin monomer to complementary holes 'a' and 'b' in the beta- and gamma-nodules, respectively, of another monomer. We characterized the A:a and B:b knob-hole interactions under varying solution conditions using Molecular Dynamics simulations of… ▽ More Polymerization of fibrin, the primary structural protein of blood clots and thrombi, occurs through binding of knobs 'A' and 'B' in the central nodule of fibrin monomer to complementary holes 'a' and 'b' in the beta- and gamma-nodules, respectively, of another monomer. We characterized the A:a and B:b knob-hole interactions under varying solution conditions using Molecular Dynamics simulations of the structural models of fibrin(ogen) fragment D complexed with synthetic peptides GPRP (knob 'A' mimetic) and GHRP (knob 'B' mimetic). The strength of A:a and B:b knob-hole complexes was roughly equal, decreasing with pulling force; yet, the dissociation kinetics were sensitive to variations in acidity (pH=5-7) and temperature (T=25-37 C). There were similar structural changes in holes 'a' and 'b' during forced dissociation of the knob-hole complexes: elongation of loop I, stretching of interior region, and translocation of the moveable flap. The disruption of the knob-hole interactions was not an "all-or-none" transition, as it occurred through distinct two-step or single-step pathways with or without intermediate states. The knob-hole bonds were stronger, tighter, and more brittle at pH=7 than at pH=5. The B:b knob-hole bonds were weaker, looser, and more compliant than the A:a knob-hole bonds at pH=7, but stronger, tighter, and less compliant at pH=5. Surprisingly, the knob-hole bonds were stronger, not weaker, at elevated temperature (T=37 C) compared to T=25 C due to the helix-to-coil transition in loop I, which helps stabilize the bonds. These results provide detailed qualitative and quantitative characteristics underlying the most significant non-covalent interactions involved in fibrin polymerization. △ Less

Submitted 30 January, 2015; originally announced January 2015.

Journal ref: J. Biol. Chem. 2013 288(31): 22681-22692

Anisotropy enhancement of the Casimir-Polder force between a nanoparticle and graphene

Authors: Svend-Age Biehs, Girish S. Agarwal

Abstract: We derive the analytical expressions for the thermal Casimir-Polder energy and force between a spheroidal nanoparticle above a semi-infinite material and a graphene covered interface. We analyze in detail the Casimir-Polder force between a gold nanoparticle and a single sheet of pristine graphene focusing on the impact of anisotropy. We show that the effect of anisotropy, i.e. the shape and orient… ▽ More We derive the analytical expressions for the thermal Casimir-Polder energy and force between a spheroidal nanoparticle above a semi-infinite material and a graphene covered interface. We analyze in detail the Casimir-Polder force between a gold nanoparticle and a single sheet of pristine graphene focusing on the impact of anisotropy. We show that the effect of anisotropy, i.e. the shape and orientation of the spheroidal nanoparticle, has a much larger influence on the force than the tunability of graphene. The effect of tuning and anisotropy both add up such that we observe a force which is between 20-50% of that in the ideal metal case which is much larger than the results found for the Casimir force between a metal halfspace and a layer of graphene. △ Less

Submitted 27 March, 2015; v1 submitted 21 March, 2014; originally announced March 2014.

Journal ref: Phys. Rev. A 90, 042510 (2014); Phys. Rev A 91, 039901(E) (2015)

Large enhancement of Forster resonance energy transfer on graphene platforms

Authors: Svend-Age Biehs, Girish S. Agarwal

Abstract: In the view of the applications of Forster resonant energy transfer (FRET) in biological systems which especially require FRET in the inrared region we investigate the great advantage of graphene plasmonics in such studies. Focusing on the fundamental aspects of FRET between a donor-acceptor pair on a graphene platform showing that FRET mediated by the plasmons in graphene is broadband and enhance… ▽ More In the view of the applications of Forster resonant energy transfer (FRET) in biological systems which especially require FRET in the inrared region we investigate the great advantage of graphene plasmonics in such studies. Focusing on the fundamental aspects of FRET between a donor-acceptor pair on a graphene platform showing that FRET mediated by the plasmons in graphene is broadband and enhanced by six orders of magnitude. We briefly discuss the impact of phonon-polaritonic substrates. △ Less

Submitted 28 October, 2013; originally announced October 2013.

Journal ref: Appl. Phys. Lett. 103, 243112 (2013)

Robust stationary mechanical squeezing in a kicked quadratic optomechanical system

Authors: M. Asjad, G. S. Agarwal, M. S. Kim, P. Tombesi, G. Di Giuseppe, D. Vitali

Abstract: We propose a scheme for the generation of a robust stationary squeezed state of a mechanical resonator in a quadratically coupled optomechanical system, driven by a pulsed laser. The intracavity photon number presents periodic intense peaks suddenly stiffening the effective harmonic potential felt by the mechanical resonator. These "optical spring kicks" tend to squeeze the resonator position, and… ▽ More We propose a scheme for the generation of a robust stationary squeezed state of a mechanical resonator in a quadratically coupled optomechanical system, driven by a pulsed laser. The intracavity photon number presents periodic intense peaks suddenly stiffening the effective harmonic potential felt by the mechanical resonator. These "optical spring kicks" tend to squeeze the resonator position, and due to the interplay with fluctuation-dissipation processes one can generate a stationary state with more than 13 dB of squeezing even starting from moderately "pre-cooled" initial thermal states. △ Less

Submitted 21 September, 2013; originally announced September 2013.

Comments: 5 pages, 3 figures. This paper supersedes an earlier version arXiv:1109.3905

Journal ref: Phys. Rev. A 89, 023849 (2014)