-
Holstein polaron in a pseudospin-$1$ quantum spin Hall system: first and second order topological phase transitions
Authors:
Kuntal Bhattacharyya,
Srijata Lahiri,
Mijanur Islam,
Saurabh Basu
Abstract:
We theoretically propose the occurrence of a quantum spin Hall (QSH) and a second order topological phase transition (TPT) driven by electron-phonon (e-p) coupling in a pseudospin-$1$ fermionic system on an $α$-$T_3$ lattice. Our model is formulated in the spirit of the Kane-Mele model modified by the Holstein Hamiltonian. The Lang-Firsov approach is employed to describe polarons reasonably well i…
▽ More
We theoretically propose the occurrence of a quantum spin Hall (QSH) and a second order topological phase transition (TPT) driven by electron-phonon (e-p) coupling in a pseudospin-$1$ fermionic system on an $α$-$T_3$ lattice. Our model is formulated in the spirit of the Kane-Mele model modified by the Holstein Hamiltonian. The Lang-Firsov approach is employed to describe polarons reasonably well in the anti-adiabatic (high frequency) limit and to obtain an effective electronic Hamiltonian. It is shown that the system possesses topologically nontrivial phases up to a critical e-p coupling, $λ_c$ and are characterized by the helical QSH edge states along with a non-zero $\mathbb{Z}_2$ invariant for a certain range of $α$. The topological phase vanishes beyond $λ_c$ and is accompanied by a bulk gap closing transition at $λ_c$, manifesting a TPT. We observe a more intriguing phenomenon for higher values of $α$, where the system exhibits TPTs supported by two distinct gap closing transitions at $λ_{c_1}$ and $λ_{c_2}$, while a slim region at slightly lower values hosts a semi-metallic signature below $λ_{c_1}$. Subsequently, to explore more intricate features, we introduce a time reversal symmetry breaking magnetic field to trigger the formation of a second order topological phase. The magnetic field, by construction causes a boundary dependent gapping out of the edge states, consequently giving rise to robust corner modes in a tailored open boundary conditions. We justify the formation of the higher order phase by employing an appropriate invariant, namely the projected spin Chern number. Finally, we show that the e-p coupling significantly influences the corner modes (and also the real space energy bandstructure), corroborating a higher order TPT as we tune $λ$ beyond a critical value for a given value of $α$.
△ Less
Submitted 26 August, 2024;
originally announced August 2024.
-
Growth of Ba_2CoWO_6 Single Crystals and their Magnetic, Thermodynamic and Electronic Properties
Authors:
Abanoub R. N. Hanna,
A. T. M. N. Islam,
C. Ritter,
S. Luther,
R. Feyerherm,
B. Lake
Abstract:
This study explores the bulk crystal growth, structural characterization, and physical property measurements of the cubic double perovskite Ba_2CoWO_6(BCWO). In BCWO, Co+2 ions form a face-centered cubic (FCC) lattice with non-distorted cobalt octahedra. The compound exhibits long-range antiferromagnetic order below TN = 14 K. Magnetization data indicated a slight anisotropy along with a spin-flop…
▽ More
This study explores the bulk crystal growth, structural characterization, and physical property measurements of the cubic double perovskite Ba_2CoWO_6(BCWO). In BCWO, Co+2 ions form a face-centered cubic (FCC) lattice with non-distorted cobalt octahedra. The compound exhibits long-range antiferromagnetic order below TN = 14 K. Magnetization data indicated a slight anisotropy along with a spin-flop transition at 10 kOe , a saturation field of 310 kOe and an ordered moment of 2.17 Mu_B at T = 1.6 K. Heat capacity measurements indicate an effective j = 1/2 ground state configuration, resulting from the combined effects of the crystal electric field and spin-orbit interaction. Surface photovoltage analysis reveals two optical gaps in the UV-Visible region, suggesting potential applications in photocatalysis and photovoltaics. The magnetic and optical properties highlight the significant role of orbital contributions within BCWO, indicating various other potential applications.
△ Less
Submitted 16 August, 2024;
originally announced August 2024.
-
Harnessing Ferro-Valleytricity in Penta-Layer Rhombohedral Graphene for Memory and Compute
Authors:
Md Mazharul Islam,
Shamiul Alam,
Md Rahatul Islam Udoy,
Md Shafayat Hossain,
Kathleen E Hamilton,
Ahmedullah Aziz
Abstract:
Two-dimensional materials with multiple degrees of freedom, including spin, valleys, and orbitals, open up an exciting avenue for engineering multifunctional devices. Beyond spintronics, these degrees of freedom can lead to novel quantum effects such as valley-dependent Hall effects and orbital magnetism, which could revolutionize next-generation electronics. However, achieving independent control…
▽ More
Two-dimensional materials with multiple degrees of freedom, including spin, valleys, and orbitals, open up an exciting avenue for engineering multifunctional devices. Beyond spintronics, these degrees of freedom can lead to novel quantum effects such as valley-dependent Hall effects and orbital magnetism, which could revolutionize next-generation electronics. However, achieving independent control over valley polarization and orbital magnetism has been a challenge due to the need for large electric fields. A recent breakthrough involving penta-layer rhombohedral graphene has demonstrated the ability to individually manipulate anomalous Hall signals and orbital magnetic hysteresis, forming what is known as a valley-magnetic quartet. Here, we leverage the electrically tunable Ferro-valleytricity of penta-layer rhombohedral graphene to develop non-volatile memory and in-memory computation applications. We propose an architecture for a dense, scalable, and selector-less non-volatile memory array that harnesses the electrically tunable ferro-valleytricity. In our designed array architecture, non-destructive read and write operations are conducted by sensing the valley state through two different pairs of terminals, allowing for independent optimization of read/write peripheral circuits. The power consumption of our PRG-based array is remarkably low, with only ~ 6 nW required per write operation and ~ 2.3 nW per read operation per cell. This consumption is orders of magnitude lower than that of the majority of state-of-the-art cryogenic memories. Additionally, we engineer in-memory computation by implementing majority logic operations within our proposed non-volatile memory array without modifying the peripheral circuitry. Our framework presents a promising pathway toward achieving ultra-dense cryogenic memory and in-memory computation capabilities.
△ Less
Submitted 2 August, 2024;
originally announced August 2024.
-
Low dimensional fragment-based descriptors for property predictions in inorganic materials with machine learning
Authors:
Md Mohaiminul Islam
Abstract:
In recent times, the use of machine learning in materials design and discovery has aided to accelerate the discovery of innovative materials with extraordinary properties, which otherwise would have been driven by a laborious and time-consuming trial-and-error process. In this study, a simple yet powerful fragment-based descriptor, Low Dimensional Fragment Descriptors (LDFD), is proposed to work i…
▽ More
In recent times, the use of machine learning in materials design and discovery has aided to accelerate the discovery of innovative materials with extraordinary properties, which otherwise would have been driven by a laborious and time-consuming trial-and-error process. In this study, a simple yet powerful fragment-based descriptor, Low Dimensional Fragment Descriptors (LDFD), is proposed to work in conjunction with machine learning models to predict important properties of a wide range of inorganic materials such as perovskite oxides, metal halide perovskites, alloys, semiconductor, and other materials system and can also be extended to work with interfaces. To predict properties, the generation of descriptors requires only the structural formula of the materials and, in presence of identical structure in the dataset, additional system properties as input. And the generation of descriptors involves few steps, encoding the formula in binary space and reduction of dimensionality, allowing easy implementation and prediction. To evaluate descriptor performance, six known datasets with up to eight components were compared. The method was applied to properties such as band gaps of perovskites and semiconductors, lattice constant of magnetic alloys, bulk/shear modulus of superhard alloys, critical temperature of superconductors, formation enthalpy and energy above hull convex of perovskite oxides. An advanced python-based data mining tool matminer was utilized for the collection of data. The prediction accuracies are equivalent to the quality of the training data and show comparable effectiveness as previous studies. This method should be extendable to any inorganic material systems which can be subdivided into layers or crystal structures with more than one atom site, and with the progress of data mining the performance should get better with larger and unbiased datasets.
△ Less
Submitted 30 July, 2024;
originally announced July 2024.
-
Electron-phonon coupling induced topological phase transition in an $α$-$T_{3}$ Haldane-Holstein model
Authors:
Mijanur Islam,
Kuntal Bhattacharyya,
Saurabh Basu
Abstract:
We present impelling evidence of topological phase transitions induced by electron-phonon (e-ph) coupling in an $α$-$T_3$ Haldane-Holstein model that presents smooth tunability between graphene ($α=0$) and a dice lattice $(α=1)$. The e-ph coupling has been incorporated via the Lang-Firsov transformation which adequately captures the polaron physics in the high frequency (anti-adiabatic) regime, an…
▽ More
We present impelling evidence of topological phase transitions induced by electron-phonon (e-ph) coupling in an $α$-$T_3$ Haldane-Holstein model that presents smooth tunability between graphene ($α=0$) and a dice lattice $(α=1)$. The e-ph coupling has been incorporated via the Lang-Firsov transformation which adequately captures the polaron physics in the high frequency (anti-adiabatic) regime, and yields an effective Hamiltonian of the system through zero phonon averaging at $T=0$. While exploring the signature of the phase transition driven by polaron and its interplay with the parameter $α$, we identify two regions based on the values of $α$, namely, the low to intermediate range $(0 < α\le 0.6)$ and larger values of $α~(0.6 < α< 1)$ where the topological transitions show distinct behaviour. There exists a single critical e-ph coupling strength for the former, below which the system behaves as a topological insulator characterized by edge modes, finite Chern number, and Hall conductivity, with all of them vanishing above this value, and the system undergoes a spectral gap closing transition. Further, the critical coupling strength depends upon $α$. For the latter case $(0.6 < α< 1)$, the scenario is more interesting where there are two critical values of the e-ph coupling at which trivial-topological-trivial and topological-topological-trivial phase transitions occur for $α$ in the range $[0.6:1]$. Our studies on e-ph coupling induced phase transitions show a significant difference with regard to the well-known unique transition occurring at $α= 0.5$ (or at $0.7$) in the absence of the e-ph coupling, and thus underscore the importance of interaction effects on the topological phase transitions.
△ Less
Submitted 19 April, 2024; v1 submitted 12 April, 2024;
originally announced April 2024.
-
Non-collinear first-principles studies of the spin-electric coupling in frustrated triangular molecular magnets
Authors:
M. F. Islam,
Kushantha P. K. Withanage,
C. M. Canali,
Mark R. Pederson
Abstract:
Frustrated triangular molecular magnets (MMs) with anti-ferromagnetic ground states (GS) are an important class of magnetic systems with potential applications in quantum information processing. The two-fold degenerate GS of these molecules, characterized by spin chirality, can be utilized to encode qubits for quantum computing. Furthermore, because of the lack of inversion symmetry in these molec…
▽ More
Frustrated triangular molecular magnets (MMs) with anti-ferromagnetic ground states (GS) are an important class of magnetic systems with potential applications in quantum information processing. The two-fold degenerate GS of these molecules, characterized by spin chirality, can be utilized to encode qubits for quantum computing. Furthermore, because of the lack of inversion symmetry in these molecules, an electric field couples directly states of opposite chirality, allowing a very efficient and fast control of the qubits. In this work we present a theoretical method to calculate the spin-electric coupling for triangular MMs with effective {\it local} spins $s$ larger than 1/2, which is amenable to a first-principles implementation based on density functional theory (DFT). In contrast to MMs where the net magnetization at the magnetic atoms is $μ_{\rm B}/2$ ($μ_{\rm B} $ is the Bohr magneton), the DFT treatment of frustrated triangular MMs with larger local magnetizations requires a fully non-collinear approach, which we have implemented in the NRLMOL DFT code. As an example, we have used these methods to evaluate the spin-electric coupling for a spin $s = 5/2$ $\{\mathrm{Fe_3}\}$ triangular MM, where this effect has been observed experimentally for the first time quite recently. Our theoretical and computational methods will help elucidate and further guide ongoing experimental work in the field of quantum molecular spintronics.
△ Less
Submitted 16 February, 2024;
originally announced February 2024.
-
Field-free ultrafast magnetization reversal of a nanodevice by a chirped current pulse via spin-orbit torque
Authors:
Y. D. Liu,
M. T. Islam,
T. Min,
X. S. Wang,
X. R. Wang
Abstract:
We investigated the magnetization reversal of a perpendicularly magnetized nanodevice using a chirped current pulse (CCP) via spin-orbit torques (SOT). Our findings demonstrate that both the field-like (FL) and damping-like (DL) components of SOT in CCP can efficiently induce ultrafast magnetization reversal without any symmetry-breaking means. For a wide frequency range of the CCP, the minimal cu…
▽ More
We investigated the magnetization reversal of a perpendicularly magnetized nanodevice using a chirped current pulse (CCP) via spin-orbit torques (SOT). Our findings demonstrate that both the field-like (FL) and damping-like (DL) components of SOT in CCP can efficiently induce ultrafast magnetization reversal without any symmetry-breaking means. For a wide frequency range of the CCP, the minimal current density obtained is significantly smaller compared to the current density of conventional SOT-reversal. This ultrafast reversal is due to the CCP triggering enhanced energy absorption (emission) of the magnetization from (to) the FL- and DL-components of SOT before (after) crossing over the energy barrier. We also verified the robustness of the CCP-driven magnetization reversal at room temperature. Moreover, this strategy can be extended to switch the magnetic states of perpendicular synthetic antiferromagnetic (SAF) and ferrimagnetic (SFi) nanodevices. Therefore, these studies enrich the basic understanding of field-free SOT-reversal and provide a novel way to realize ultrafast SOT-MRAM devices with various free layer designs: ferromagnetic, SAF, and SFi.
△ Less
Submitted 12 January, 2024; v1 submitted 9 January, 2024;
originally announced January 2024.
-
Nonthermal electron-photon steady states in open cavity quantum materials
Authors:
R. Flores-Calderón,
Md Mursalin Islam,
Michele Pini,
Francesco Piazza
Abstract:
Coupling a system to two different baths can lead to novel phenomena escaping the constraints of thermal equilibrium. In quantum materials inside optical cavities, this feature can be exploited as electrons and cavity-photons are easily pulled away from their mutual equilibrium, even in the steady state. This offers new routes for a non-invasive control of material properties and functionalities.…
▽ More
Coupling a system to two different baths can lead to novel phenomena escaping the constraints of thermal equilibrium. In quantum materials inside optical cavities, this feature can be exploited as electrons and cavity-photons are easily pulled away from their mutual equilibrium, even in the steady state. This offers new routes for a non-invasive control of material properties and functionalities. We show that the absence of thermal equilibrium between electrons and photons leads to reduced symmetries of the steady-state electronic distribution function. Moreover, by defining an effective temperature from the on-shell distribution function, we find a non-monotonic behaviour as a function of cavity frequency, consistent with recent experimental findings. Finally, we show that, the non-thermal behaviour leads to qualitative modifications of the material's properties, as the standard Sommerfeld expansion for observables is modified by a leading-order correction linearly proportional to the temperature difference between the two baths and to the frequency-derivative of the electron damping.
△ Less
Submitted 17 April, 2024; v1 submitted 28 December, 2023;
originally announced December 2023.
-
Demonstration and STEM Analysis of Ferroelectric Switching in MOCVD-Grown Single Crystalline Al$_{0.85}$Sc$_{0.15}$N
Authors:
Niklas Wolff,
Georg Schoenweger,
Isabel Streicher,
Md Redwanul Islam,
Nils Braun,
Patrik Stranak,
Lutz Kirste,
Mario Prescher,
Andriy Lotnyk,
Hermann Kohlstedt,
Stefano Leone,
Lorenz Kienle,
Simon Fichtner
Abstract:
Wurtzite-type Al$_{1-x}$Sc$_x$N solid solutions grown by metal organic chemical vapour deposition are for the first time confirmed to be ferroelectric. The film with 230 nm thickness and x = 0.15 exhibits a coercive field of 5.5 MV/cm at a measurement frequency of 1.5 kHz. Single crystal quality and homogeneous chemical composition of the film was confirmed by X-ray diffraction spectroscopic metho…
▽ More
Wurtzite-type Al$_{1-x}$Sc$_x$N solid solutions grown by metal organic chemical vapour deposition are for the first time confirmed to be ferroelectric. The film with 230 nm thickness and x = 0.15 exhibits a coercive field of 5.5 MV/cm at a measurement frequency of 1.5 kHz. Single crystal quality and homogeneous chemical composition of the film was confirmed by X-ray diffraction spectroscopic methods such as time of flight secondary ion mass spectrometry. Annular bright field scanning transmission electron microscopy served to proof the ferroelectric polarization inversion on unit cell level. The single crystal quality further allowed to image the large-scale domain pattern of a wurtzite-type ferroelectric for the first time, revealing a predominantly cone-like domain shape along the c-axis of the material. As in previous work, this again implies the presence of strong polarization discontinuities along this crystallographic axis, which could be suitable for current transport. The domains are separated by narrow domain walls, for which an upper thickness limit of 3 nm was deduced, but which could potentially be atomically sharp. We are confident that these results will advance the commencing integration of wurtzite-type ferroelectrics to GaN as well as generally III-N based heterostructures and devices.
△ Less
Submitted 21 December, 2023;
originally announced December 2023.
-
DFT based investigation of structural, elastic, optoelectronic, thermophysical and superconducting state properties of binary Mo3P at different pressures
Authors:
Md. Sohel Rana,
Razu Ahmed,
Md. Sajidul Islam,
R. S. Islam,
S. H. Naqib
Abstract:
In recent years, the investigation of novel materials for various technological applications has gained much importance in materials science research. Tri-molybdenum phosphide (Mo3P), a promising transition metal phosphide (TMP), has gathered significant attention due to its unique structural and electronic properties, which already make it potentially valuable system for catalytic and electronic…
▽ More
In recent years, the investigation of novel materials for various technological applications has gained much importance in materials science research. Tri-molybdenum phosphide (Mo3P), a promising transition metal phosphide (TMP), has gathered significant attention due to its unique structural and electronic properties, which already make it potentially valuable system for catalytic and electronic device applications. Through an in-depth study using the density functional theory (DFT) calculations, this work aims to clarify the basic properties of the Mo3P compound at different pressures. In this work, we have studied the structural, elastic, optoelectronic and thermophysical properties of binary Mo3P compound. In this investigation, we varied uniform hydrostatic pressure from 0 GPa to 30 GPa. A complete geometrical optimization for structural parameters is performed and the obtained values are in good accord with the experimental values where available. It is also found that Mo3P possesses very low level of elastic anisotropy, reasonably good machinability, ductile nature, relatively high Vickers hardness, high Debye temperature and high melting temperature. Thermomechanical properties indicate that the compound has potential to be used as a thermal barrier coating material. The bonding nature in Mo3P has been explored. The electronic band structure shows that Mo3P has no band gap and exhibits conventional metallic behavior. All of the energy dependent optical characteristics demonstrate apparent metallic behavior and agree exactly with the electronic density of states calculations. The compound has excellent reflective and absorptive properties suitable for optical applications. Pressure dependent variations of the physical properties are explored and their possible link with superconductivity has been discussed.
△ Less
Submitted 10 December, 2023;
originally announced December 2023.
-
Spinon heat transport in the three-dimensional quantum magnet PbCuTe$_2$O$_6$
Authors:
Xiaochen Hong,
Matthias Gillig,
Abanoub R. N. Hanna,
Shravani Chillal,
A. T. M. Nazmul Islam,
Bella Lake,
Bernd Büchner,
Christian Hess
Abstract:
Quantum spin liquids (QSL) are novel phases of matter which remain quantum disordered even at the lowest temperature. They are characterized by emergent gauge fields and fractionalized quasiparticles. Here we show that the sub-Kelvin thermal transport of the three-dimensional $S=1/2$ hyper-hyperkagome quantum magnet PbCuTe$_2$O$_6$ is governed by a sizeable charge-neutral fermionic contribution wh…
▽ More
Quantum spin liquids (QSL) are novel phases of matter which remain quantum disordered even at the lowest temperature. They are characterized by emergent gauge fields and fractionalized quasiparticles. Here we show that the sub-Kelvin thermal transport of the three-dimensional $S=1/2$ hyper-hyperkagome quantum magnet PbCuTe$_2$O$_6$ is governed by a sizeable charge-neutral fermionic contribution which is compatible with the itinerant fractionalized excitations of a spinon Fermi surface. We demonstrate that this hallmark feature of the QSL state is remarkably robust against sample crystallinity, large magnetic field, and field-induced magnetic order, ruling out the imitation of QSL features by extrinsic effects. Our findings thus reveal the characteristic low-energy features of PbCuTe$_2$O$_6$ which qualify this compound as a true QSL material.
△ Less
Submitted 20 November, 2023;
originally announced November 2023.
-
Roadmap on Photovoltaic Absorber Materials for Sustainable Energy Conversion
Authors:
James C. Blakesley,
Ruy S. Bonilla,
Marina Freitag,
Alex M. Ganose,
Nicola Gasparini,
Pascal Kaienburg,
George Koutsourakis,
Jonathan D. Major,
Jenny Nelson,
Nakita K. Noel,
Bart Roose,
Jae Sung Yun,
Simon Aliwell,
Pietro P. Altermatt,
Tayebeh Ameri,
Virgil Andrei,
Ardalan Armin,
Diego Bagnis,
Jenny Baker,
Hamish Beath,
Mathieu Bellanger,
Philippe Berrouard,
Jochen Blumberger,
Stuart A. Boden,
Hugo Bronstein
, et al. (61 additional authors not shown)
Abstract:
Photovoltaics (PVs) are a critical technology for curbing growing levels of anthropogenic greenhouse gas emissions, and meeting increases in future demand for low-carbon electricity. In order to fulfil ambitions for net-zero carbon dioxide equivalent (CO<sub>2</sub>eq) emissions worldwide, the global cumulative capacity of solar PVs must increase by an order of magnitude from 0.9 TWp in 2021 to 8.…
▽ More
Photovoltaics (PVs) are a critical technology for curbing growing levels of anthropogenic greenhouse gas emissions, and meeting increases in future demand for low-carbon electricity. In order to fulfil ambitions for net-zero carbon dioxide equivalent (CO<sub>2</sub>eq) emissions worldwide, the global cumulative capacity of solar PVs must increase by an order of magnitude from 0.9 TWp in 2021 to 8.5 TWp by 2050 according to the International Renewable Energy Agency, which is considered to be a highly conservative estimate. In 2020, the Henry Royce Institute brought together the UK PV community to discuss the critical technological and infrastructure challenges that need to be overcome to address the vast challenges in accelerating PV deployment. Herein, we examine the key developments in the global community, especially the progress made in the field since this earlier roadmap, bringing together experts primarily from the UK across the breadth of the photovoltaics community. The focus is both on the challenges in improving the efficiency, stability and levelized cost of electricity of current technologies for utility-scale PVs, as well as the fundamental questions in novel technologies that can have a significant impact on emerging markets, such as indoor PVs, space PVs, and agrivoltaics. We discuss challenges in advanced metrology and computational tools, as well as the growing synergies between PVs and solar fuels, and offer a perspective on the environmental sustainability of the PV industry. Through this roadmap, we emphasize promising pathways forward in both the short- and long-term, and for communities working on technologies across a range of maturity levels to learn from each other.
△ Less
Submitted 30 October, 2023;
originally announced October 2023.
-
Properties of an α-T3 Aharonov-Bohm quantum ring: Interplay of Rashba spin-orbit coupling and topological defect
Authors:
Mijanur Islam,
Saurabh Basu
Abstract:
In this paper we investigate the interplay of the Rashba spin-orbit coupling (RSOC) and a topological defect, such as a screw dislocation in an α-T3 Aharonov-Bohm quantum ring and scrutinized the effect of an external transverse magnetic field therein. Our study reveals that the energy spectrum follows a parabolic dependence on the Burgers vector associated with the screw dislocation. Moreover, it…
▽ More
In this paper we investigate the interplay of the Rashba spin-orbit coupling (RSOC) and a topological defect, such as a screw dislocation in an α-T3 Aharonov-Bohm quantum ring and scrutinized the effect of an external transverse magnetic field therein. Our study reveals that the energy spectrum follows a parabolic dependence on the Burgers vector associated with the screw dislocation. Moreover, its presence results in an effective flux, encompassing the ramifications due to both the topological flux and that due to the external magnetic field. Furthermore, we observe periodic oscillations in the persistent current in both charge and spin sectors, with a period equal to one flux quantum, which, however suffers a phase shift that is proportional to the dislocation present in the system. Such tunable oscillations of the spin persistent current highlights potential application of our system to be used as spintronic devices. Additionally, we derive and analyse the thermodynamic properties of the ring via obtaining the canonical partition function through Euler-Maclaurin formula. In particular, we compute the thermodynamic potentials, free energies, entropy, and heat capacity and found the latter to yield the expected Dulong-Petit law at large temperatures.
△ Less
Submitted 22 October, 2023;
originally announced October 2023.
-
Magnetic structure, excitations and field induced transitions in the honeycomb lattice $\rm{Er_2Si_2O_7}$
Authors:
M. Islam,
N. d'Ambrumenil,
D. D. Khalyavin,
P. Manuel,
F. Orlandi,
J. Ollivier,
M. Ciomaga Hatnean,
G. Balakrishnan,
O. A. Petrenko
Abstract:
We investigate the magnetic properties of the monoclinic D-type $\rm{Er_2Si_2O_7}$ with a distorted honeycomb lattice using powder and single crystal neutron scattering techniques, as well as single crystal magnetisation measurements. The powder neutron diffraction shows that below the ordering temperature, $T_{\rm N}=1.85$ K, the compound forms a ${\bf q}=0$ antiferromagnetic structure with four…
▽ More
We investigate the magnetic properties of the monoclinic D-type $\rm{Er_2Si_2O_7}$ with a distorted honeycomb lattice using powder and single crystal neutron scattering techniques, as well as single crystal magnetisation measurements. The powder neutron diffraction shows that below the ordering temperature, $T_{\rm N}=1.85$ K, the compound forms a ${\bf q}=0$ antiferromagnetic structure with four sublattices. For $H \! \parallel \! a$, magnetisation measurements reveal a narrow, but clearly visible plateau at one third of the magnetisation saturation value. The plateau's stabilisation is accompanied by a significant increase of the magnetic unit cell, as the magnetic peaks with fractional indices are observed in single crystal neutron diffraction experiments. At low-temperatures, the inelastic neutron scattering measurements reveal the presence of low-energy dispersionless excitations. Their spectrum is sensitive to the applied field, it significantly softens on the magnetisation plateau, and demonstrates the behaviour expected for a non-collinear Ising antiferromagnet away from the plateau.
△ Less
Submitted 14 November, 2023; v1 submitted 13 October, 2023;
originally announced October 2023.
-
Effect of Triangular Pre-Cracks on the Mechanical Behavior of 2D MoTe$_2$: A Molecular Dynamics Study
Authors:
Md. Jobayer Aziz,
Md Akibul Islam,
Md. Rezwanul Karim,
Arafat Ahmed Bhuiyan
Abstract:
Among two-dimensional (2D) materials, transition metal dichalcogenides (TMDs) stand out for their remarkable electronic, optical, and chemical properties. In addition to being variable bandgap semiconductor materials, the atomic thinness provides flexibility to TMDs. Therefore, understanding the physical properties of TMDs for applications in flexible and wearable devices is crucial. Despite the g…
▽ More
Among two-dimensional (2D) materials, transition metal dichalcogenides (TMDs) stand out for their remarkable electronic, optical, and chemical properties. In addition to being variable bandgap semiconductor materials, the atomic thinness provides flexibility to TMDs. Therefore, understanding the physical properties of TMDs for applications in flexible and wearable devices is crucial. Despite the growing enthusiasm surrounding two-dimensional transition metal dichalcogenides (TMDs), our understanding of the mechanical characteristics of molybdenum ditelluride (MoTe$_2$) remains limited. The mechanical properties of MoTe$_2$ deteriorate in the presence of pre-existing cracks or vacancy defects, which are very common in grown TMDs. In this study, the fracture properties and crack propagation of monolayer molybdenum ditelluride (MoTe$_2$) sheets containing pre-existing triangular cracks with various vertex angles are investigated by performing molecular dynamics (MD) simulations of uniaxial and biaxial tensile loading. Due to pre-crack length, angle, and perimeter variations, monolayer MoTe$_2$ with pre-existing cracks underwent considerable changes in Young's modulus, tensile strength, fracture toughness, and fracture strain values. We have found that the pre-cracked MoTe$_2$ is more brittle than its pristine counterpart. Regulated alteration of pre-crack angle under constant simulation conditions improved the uniaxial mechanical properties. Similarly, regulated alteration of the perimeter of the pre-crack resulted in improved biaxial mechanical properties. This study contributes to the foundational knowledge for advanced design strategies involving strain engineering in MoTe$_2$ and other similar transition metal dichalcogenides.
△ Less
Submitted 2 October, 2023;
originally announced October 2023.
-
Magnetic structure and phase diagram of the Heisenberg-Ising spin chain antiferromagnetic PbCo$_{2}$V$_{2}$O$_{8}$
Authors:
K. Puzniak,
C. Aguilar-Maldonado,
R. Feyerherm,
K. Prokeš,
A. T. M. N. Islam,
Y. Skourski,
L. Keller,
B. Lake
Abstract:
The effective spin-1/2 antiferromagnetic Heisenberg-Ising chain materials, ACo$_2$V$_2$O$_8$, A = Sr, Ba, are a rich source of exotic fundamental phenomena and have been investigated for their model magnetic properties both in zero and non-zero magnetic fields. Here we investigate a new member of the family, namely PbCo$_2$V$_2$O$_8$. We synthesize powder and single crystal samples of PbCo$_2$V…
▽ More
The effective spin-1/2 antiferromagnetic Heisenberg-Ising chain materials, ACo$_2$V$_2$O$_8$, A = Sr, Ba, are a rich source of exotic fundamental phenomena and have been investigated for their model magnetic properties both in zero and non-zero magnetic fields. Here we investigate a new member of the family, namely PbCo$_2$V$_2$O$_8$. We synthesize powder and single crystal samples of PbCo$_2$V$_2$O$_8$ and determine its magnetic structure using neutron diffraction. Furthermore, the magnetic field/temperature phase diagrams for magnetic field applied along the c, a, and [110] crystallographic directions in the tetragonal unit cell are determined via magnetization and heat capacity measurements. A complex series of phases and quantum phase transitions are discovered that depend strongly on both the magnitude and direction of the field. Our results show that \pcvo is an effective spin-1/2 antiferromagnetic Heisenberg-Ising chain with properties that are in general comparable to those of SrCo$_2$V$_2$O$_8$ and BaCo$_2$V$_2$O$_8$. One interesting departure from the results of these related compounds, is however, the discovery of a new field-induced phase for the field direction $H\|$[110] which has not been previously observed.
△ Less
Submitted 28 September, 2023;
originally announced September 2023.
-
Ab-initio insights into the physical properties of XIr3 (X = La, Th) superconductors: A comparative analysis
Authors:
Md. Sajidul Islam,
Razu Ahmed,
M. M. Hossain,
M. A. Ali,
M. M. Uddin,
S. H. Naqib
Abstract:
Here we report the structural, elastic, bonding, thermo-mechanical, optoelectronic and superconducting state properties of recently discovered XIr3 (X = La, Th) superconductors utilizing the density functional theory (DFT). The elastic, bonding, thermal and optical properties of these compounds are investigated for the first time. The calculated lattice and superconducting state parameters are in…
▽ More
Here we report the structural, elastic, bonding, thermo-mechanical, optoelectronic and superconducting state properties of recently discovered XIr3 (X = La, Th) superconductors utilizing the density functional theory (DFT). The elastic, bonding, thermal and optical properties of these compounds are investigated for the first time. The calculated lattice and superconducting state parameters are in reasonable agreement to those found in the literature. In the ground state, both the compounds are mechanically stable and possess highly ductile character, high machinability, low Debye temperature, low bond hardness and significantly high melting point. The thermal conductivities of the compounds are found to be very low which suggests that they can be used for thermal insulation purpose. The population analysis and charge density distribution map confirm the presence of both ionic and covalent bonds in the compounds with ionic bond playing dominant roles. The calculated band structure and DOS profiles indicate metallic character. Unlike the significant anisotropy observed in elastic and thermal properties, all the optical constants of these compounds exhibit almost isotropic behavior. The optical constants correspond very well with the electronic band structure and DOS features. We have estimated the superconducting transition temperature of the compounds in this work.
△ Less
Submitted 27 September, 2023;
originally announced September 2023.
-
Large-Scale Statistical Analysis of Defect Emission in hBN: Revealing Spectral Families and Influence of Flakes Morphology
Authors:
M. S. Islam,
R. K. Chowdhury,
M. Barthelemy,
L. Moczko,
P. Hebraud,
S. Berciaud,
A. Barsella,
F. Fras
Abstract:
Quantum emitters in two-dimensional layered hexagonal boron nitride are quickly emerging as a highly promising platform for next-generation quantum technologies. However, precise identification and control of defects are key parameters to achieve the next step in their development. We conducted a comprehensive study by analyzing over 10,000 photoluminescence emission lines, revealing 11 distinct d…
▽ More
Quantum emitters in two-dimensional layered hexagonal boron nitride are quickly emerging as a highly promising platform for next-generation quantum technologies. However, precise identification and control of defects are key parameters to achieve the next step in their development. We conducted a comprehensive study by analyzing over 10,000 photoluminescence emission lines, revealing 11 distinct defect families within the 1.6 to 2.2 eV energy range. This challenges hypotheses of a random energy distribution. We also reported averaged defect parameters, including emission linewidths, spatial density, phonon side bands, and the Debye-Waller factors. These findings provide valuable insights to decipher the microscopic origin of emitters in hBN hosts. We also explored the influence of hBN host morphology on defect family formation, demonstrating its crucial impact. By tuning flake size and arrangement we achieve selective control of defect types while maintaining high spatial density. This offers a scalable approach to defect emission control, diverging from costly engineering methods. It highlights the importance of investigating flake morphological control to gain deeper insights into the origins of defects and to expand the spectral tailoring capabilities of defects in hBN.
△ Less
Submitted 26 September, 2023;
originally announced September 2023.
-
Reimagining Sense Amplifiers: Harnessing Phase Transition Materials for Current and Voltage Sensing
Authors:
Md Mazharul Islam,
Shamiul Alam,
Mohammad Adnan Jahangir,
Garrett S. Rose,
Suman Datta,
Vijaykrishnan Narayanan,
Sumeet Kumar Gupta,
Ahmedullah Aziz
Abstract:
Energy-efficient sense amplifier (SA) circuits are essential for reliable detection of stored memory states in emerging memory systems. In this work, we present four novel sense amplifier (SA) topologies based on phase transition material (PTM) tailored for non-volatile memory applications. We utilize the abrupt switching and volatile hysteretic characteristics of PTMs which enables efficient and…
▽ More
Energy-efficient sense amplifier (SA) circuits are essential for reliable detection of stored memory states in emerging memory systems. In this work, we present four novel sense amplifier (SA) topologies based on phase transition material (PTM) tailored for non-volatile memory applications. We utilize the abrupt switching and volatile hysteretic characteristics of PTMs which enables efficient and fast sensing operation in our proposed SA topologies. We provide comprehensive details of their functionality and assess how process variations impact their performance metrics. Our proposed sense amplifier topologies manifest notable performance enhancement. We achieve a ~67% reduction in sensing delay and a ~80% decrease in sensing power for current sensing. For voltage sensing, we achieve a ~75% reduction in sensing delay and a ~33% decrease in sensing power. Moreover, the proposed SA topologies exhibit improved variation robustness compared to conventional SAs. We also scrutinize the dependence of transistor mirroring window and PTM transition voltages on several device parameters to determine the optimum operating conditions and stance of tunability for each of the proposed SA topologies.
△ Less
Submitted 30 August, 2023;
originally announced August 2023.
-
A Deep Dive into the Design Space of a Dynamically Reconfigurable Cryogenic Spiking Neuron
Authors:
Md Mazharul Islam,
Shamiul Alam,
Catherine D Schuman,
Md Shafayat Hossain,
Ahmedullah Aziz
Abstract:
Spiking neural network offers the most bio-realistic approach to mimic the parallelism and compactness of the human brain. A spiking neuron is the central component of an SNN which generates information-encoded spikes. We present a comprehensive design space analysis of the superconducting memristor (SM)-based electrically reconfigurable cryogenic neuron. A superconducting nanowire (SNW) connected…
▽ More
Spiking neural network offers the most bio-realistic approach to mimic the parallelism and compactness of the human brain. A spiking neuron is the central component of an SNN which generates information-encoded spikes. We present a comprehensive design space analysis of the superconducting memristor (SM)-based electrically reconfigurable cryogenic neuron. A superconducting nanowire (SNW) connected in parallel with an SM function as a dual-frequency oscillator and two of these oscillators can be coupled to design a dynamically tunable spiking neuron. The same neuron topology was previously proposed where a fixed resistance was used in parallel with the SNW. Replacing the fixed resistance with the SM provides an additional tuning knob with four distinct combinations of SM resistances, which improves the reconfigurability by up to ~70%. Utilizing an external bias current (Ibias), the spike frequency can be modulated up to ~3.5 times. Two distinct spike amplitudes (~1V and ~1.8 V) are also achieved. Here, we perform a systematic sensitivity analysis and show that the reconfigurability can be further tuned by choosing a higher input current strength. By performing a 500-point Monte Carlo variation analysis, we find that the spike amplitude is more variation robust than spike frequency and the variation robustness can be further improved by choosing a higher Ibias. Our study provides valuable insights for further exploration of materials and circuit level modification of the neuron that will be useful for system-level incorporation of the neuron circuit
△ Less
Submitted 30 August, 2023;
originally announced August 2023.
-
Thermal effect on microwave pulse driven magnetization switching of Stoner particle
Authors:
S. Chowdhury,
M. A. S. Akanda,
M. A. J. Pikul,
M. T. Islam,
Tai Min
Abstract:
Recently it has been demonstrated that the cosine chirp microwave pulse (CCMP) is capable of achieving fast and energy-efficient magnetization-reversal of a nanoparticle with zero-Temperature. However, we investigate the finite temperature, $T$ effect on the CCMP-driven magnetization reversal using the framework of the stochastic Landau Lifshitz Gilbert equation. At finite Temperature, we obtain t…
▽ More
Recently it has been demonstrated that the cosine chirp microwave pulse (CCMP) is capable of achieving fast and energy-efficient magnetization-reversal of a nanoparticle with zero-Temperature. However, we investigate the finite temperature, $T$ effect on the CCMP-driven magnetization reversal using the framework of the stochastic Landau Lifshitz Gilbert equation. At finite Temperature, we obtain the CCMP-driven fast and energy-efficient reversal and hence estimate the maximal temperature, $T_{max}$ at which the magnetization reversal is valid. $T_{max}$ increases with increasing the nanoparticle cross-sectional area/shape anisotropy up to a certain value, and afterward $T_{max}$ decreases with the further increment of nanoparticle cross-sectional area/shape anisotropy. This is because of demagnetization/shape anisotropy field opposes the magnetocrystalline anisotropy, i.e., reduces the energy barrier which separates the two stable states. For smaller cross-sectional area/shape anisotropy, the controlling parameters of CCMP show decreasing trend with temperature. We also find that with the increment easy-plane shape-anisotropy, the required initial frequency of CCMP significantly reduces. For the larger volume of nanoparticles, the parameters of CCMP remains constant for a wide range of temperature which are desired for the device application. Therefore, The above findings might be useful to realize the CCMP-driven fast and energy-efficient magnetization reversal in realistic conditions.
△ Less
Submitted 24 August, 2023;
originally announced August 2023.
-
Tunable persistent currents in a spin-orbit coupled pseudospin-1 fermionic quantum ring
Authors:
Mijanur Islam,
Saurabh Basu
Abstract:
We conduct a thorough study of the persistent currents in a spin-orbit coupled $α-T_3$ pseudospin-1 fermionic quantum ring (QR) that smoothly interpolates between graphene ($α = 0$, pseudospin-1/2) and a dice lattice ($α = 1$, pseudospin-1). In particular, we have considered both intrinsic spin-orbit coupling (ISOC) and Rashba spin-orbit coupling (RSOC) in addition to an external magnetic field, a…
▽ More
We conduct a thorough study of the persistent currents in a spin-orbit coupled $α-T_3$ pseudospin-1 fermionic quantum ring (QR) that smoothly interpolates between graphene ($α = 0$, pseudospin-1/2) and a dice lattice ($α = 1$, pseudospin-1). In particular, we have considered both intrinsic spin-orbit coupling (ISOC) and Rashba spin-orbit coupling (RSOC) in addition to an external magnetic field, and have systematically enumerated their individual and combined effects on the charge, valley and the spin-polarized persistent currents. The energy levels of the system comprise of the conduction bands, valence bands, and flat bands which show non-monotonic dependencies on the ring radius, R of the QR, in the sense that, for small R, the energy levels vary as 1/R, while the variation is linear in R for large R. The cases corresponding to zero magnetic fields are benchmarked with those for finite external fields. Further, it is noted that the flat bands demonstrate dispersive behavior, and hence can contribute to the transport properties only when ISOC is non-zero. Moreover, the RSOC yields spin-split bands, thereby contributing to the spin-resolved currents, together with distinct degeneracies for different spin branches. The persistent currents in the charge, valley, and spin sectors for each of these cases oscillate as a function of the magnetic field with a period equal to the flux quantum, as they should be, and depend upon the spin-orbit coupling terms. Further, we have explored the role played by the parameter $α$ in our entire analysis to ascertain the effect of the flat bands.
△ Less
Submitted 13 August, 2023;
originally announced August 2023.
-
Comprehensive first-principles insights into the physical properties of intermetallic Zr$_3$Ir: a noncentrosymmetric superconductor
Authors:
Razu Ahmed,
Md. Sajidul Islam,
M. M. Hossain,
M. A. Ali,
M. M. Uddin,
S. H. Naqib
Abstract:
We have looked into the structural, mechanical, optoelectronic, superconducting state and thermophysical aspects of intermetallic compound Zr$_3$Ir using the density functional theory (DFT). Many of the physical properties, including direction dependent mechanical properties, Vickers hardness, optical properties, chemical bonding nature, and charge density distributions, are being investigated for…
▽ More
We have looked into the structural, mechanical, optoelectronic, superconducting state and thermophysical aspects of intermetallic compound Zr$_3$Ir using the density functional theory (DFT). Many of the physical properties, including direction dependent mechanical properties, Vickers hardness, optical properties, chemical bonding nature, and charge density distributions, are being investigated for the first time. According to this study, Zr$_3$Ir exhibits ductile features, high machinability, significant metallic bonding, a low Vickers hardness with low Debye temperature, and a modest level of elastic anisotropy. The mechanical and dynamical stabilities of Zr$_3$Ir have been confirmed. The metallic nature of Zr$_3$Ir is seen in the electronic band structures with a high electronic energy density of states at the Fermi level. The bonding nature has been explored by the charge density mapping and bond population analysis. The tetragonal Zr$_3$Ir shows a remarkable electronic stability, as confirmed by the presence of a pseudogap in the electronic energy density of states at the Fermi level between the bonding and antibonding states. Optical parameters show very good agreement with the electronic properties. The reflectivity spectra reveal that Zr$_3$Ir is a good reflector in the infrared and near-visible regions. Zr$_3$Ir is an excellent ultra-violet (UV) radiation absorber. High refractive index at visible photon energies indicates that Zr$_3$Ir could be used to improve the visual aspects of electronic displays. All the optical constants exhibit a moderate degree of anisotropy. Zr$_3$Ir has a moderate melting point, high damage tolerance, and very low minimum thermal conductivity. The thermomechanical characteristics of Zr$_3$Ir reveal that it is a potential thermal barrier coating material. The superconducting state parameters of Zr$_3$Ir are also explored.
△ Less
Submitted 11 July, 2023;
originally announced July 2023.
-
Probing single electrons across 300 mm spin qubit wafers
Authors:
Samuel Neyens,
Otto K. Zietz,
Thomas F. Watson,
Florian Luthi,
Aditi Nethwewala,
Hubert C. George,
Eric Henry,
Mohammad Islam,
Andrew J. Wagner,
Felix Borjans,
Elliot J. Connors,
J. Corrigan,
Matthew J. Curry,
Daniel Keith,
Roza Kotlyar,
Lester F. Lampert,
Mateusz T. Madzik,
Kent Millard,
Fahd A. Mohiyaddin,
Stefano Pellerano,
Ravi Pillarisetty,
Mick Ramsey,
Rostyslav Savytskyy,
Simon Schaal,
Guoji Zheng
, et al. (5 additional authors not shown)
Abstract:
Building a fault-tolerant quantum computer will require vast numbers of physical qubits. For qubit technologies based on solid state electronic devices, integrating millions of qubits in a single processor will require device fabrication to reach a scale comparable to that of the modern CMOS industry. Equally importantly, the scale of cryogenic device testing must keep pace to enable efficient dev…
▽ More
Building a fault-tolerant quantum computer will require vast numbers of physical qubits. For qubit technologies based on solid state electronic devices, integrating millions of qubits in a single processor will require device fabrication to reach a scale comparable to that of the modern CMOS industry. Equally importantly, the scale of cryogenic device testing must keep pace to enable efficient device screening and to improve statistical metrics like qubit yield and voltage variation. Spin qubits based on electrons in Si have shown impressive control fidelities but have historically been challenged by yield and process variation. Here we present a testing process using a cryogenic 300 mm wafer prober to collect high-volume data on the performance of hundreds of industry-manufactured spin qubit devices at 1.6 K. This testing method provides fast feedback to enable optimization of the CMOS-compatible fabrication process, leading to high yield and low process variation. Using this system, we automate measurements of the operating point of spin qubits and probe the transitions of single electrons across full wafers. We analyze the random variation in single-electron operating voltages and find that the optimized fabrication process leads to low levels of disorder at the 300 mm scale. Together these results demonstrate the advances that can be achieved through the application of CMOS industry techniques to the fabrication and measurement of spin qubit devices.
△ Less
Submitted 3 May, 2024; v1 submitted 10 July, 2023;
originally announced July 2023.
-
Temperature Dependent Failure of Atomically Thin MoTe2
Authors:
A S M Redwan Haider,
Ahmad Fatehi Ali Mohammed Hezam,
Md Akibul Islam,
Yeasir Arafat,
Mohammad Tanvirul Ferdaous,
Sayedus Salehin,
Md. Rezwanul Karim
Abstract:
In this study, we systematically investigated the mechanical responses of monolayer molybdenum ditelluride (MoTe2) using molecular dynamics (MD) simulations. The tensile behavior of trigonal prismatic phase (2H phase) MoTe2 under uniaxial strain was simulated in the armchair and zigzag directions. We also investigated the crack formation and propagation in both armchair and zigzag directions at 10…
▽ More
In this study, we systematically investigated the mechanical responses of monolayer molybdenum ditelluride (MoTe2) using molecular dynamics (MD) simulations. The tensile behavior of trigonal prismatic phase (2H phase) MoTe2 under uniaxial strain was simulated in the armchair and zigzag directions. We also investigated the crack formation and propagation in both armchair and zigzag directions at 10K and 300K to understand the fracture behavior of monolayer MoTe2 at different temperatures. The MD simulations show clean cleavage for the armchair direction, and the cracks were numerous and scattered in the case of the zigzag direction. Finally, we investigated the effect of temperature on Young's modulus and fracture stress of monolayer MoTe2. The results show that at a strain rate of 10^-4 ps^-1, the fracture strength of monolayer MoTe2 in the armchair and zigzag directions at 10K is 16.33 GPa (11.43 N/m) and 13.71 GPa (9.46 N/m) under a 24% and 18% fracture strain, respectively. The fracture strength of monolayer MoTe2 in the armchair and zigzag direction at 600K is 10.81 GPa (7.56 N/m) and 10.13 GPa (7.09 N/m) under a 12.5% and 12.47% fracture strain, respectively.
△ Less
Submitted 20 January, 2024; v1 submitted 26 June, 2023;
originally announced June 2023.
-
DFT insights into MAX phase borides Hf2AB [A = S, Se, Te] in comparison with MAX phase carbides Hf2AC [A = S, Se, Te]
Authors:
J. Islam,
M. D. Islam,
M. A. Ali,
H. Akter,
A. Hossain,
M. Biswas,
M. M. Hossain,
M. M. Uddin,
S. H. Naqib
Abstract:
In this work, density functional theory (DFT) based calculations were performed to compute the physical properties (structural stability, mechanical behavior, electronic, thermodynamic, and optical properties) of synthesized MAX phases Hf2SB, Hf2SC, Hf2SeB, Hf2SeC, Hf2TeB, and the as-yet-undiscovered MAX carbide phase Hf2TeC. Calculations of formation energy, phonon dispersion curves, and elastic…
▽ More
In this work, density functional theory (DFT) based calculations were performed to compute the physical properties (structural stability, mechanical behavior, electronic, thermodynamic, and optical properties) of synthesized MAX phases Hf2SB, Hf2SC, Hf2SeB, Hf2SeC, Hf2TeB, and the as-yet-undiscovered MAX carbide phase Hf2TeC. Calculations of formation energy, phonon dispersion curves, and elastic constants confirmed the stability of the aforementioned compounds. The obtained values of lattice parameters, elastic constants, and elastic moduli of Hf2SB, Hf2SC, Hf2SeB, Hf2SeC, and Hf2TeB showed fair agreement with earlier studies, whereas the values of the mentioned parameters for the predicted Hf2TeC exhibit a good consequence of B replacement by C. The anisotropic mechanical properties are exhibited by the considered MAX phases. The metallic nature and its anisotropic behavior were revealed by the electronic band structure and density of states. The analysis of the thermal properties Debye temperature, melting temperature, minimum thermal conductivity, and Gruneisen parameter confirmed that the carbide phases were more suited than the boride phases considered herein. The MAX phase response to incoming photons further demonstrated that they were metallic. Their suitability for use as coating materials to prevent solar heating was demonstrated by the reflectivity spectra. Additionally, this study demonstrated the impact of B replacing C in the MAX phases.
△ Less
Submitted 21 June, 2023;
originally announced June 2023.
-
Fabrication and Characterization of Graphene-Barium Titanate-Graphene layered capacitors by spin coating at low processing temperatures
Authors:
M. S. Habib,
S. F. U. Farhad,
N. I. Tanvir,
M. S. Alam,
M. N. A. Bitu,
M. S. Islam,
S. Islam,
N. Khatun,
M. S Hossain
Abstract:
Barium titanate, BaTiO3 (BT), materials have been synthesized by two different routes: one ball-mill-derived (BMD) nanopowder and another precursor-derived (PCD) BT synthesis method were used separately to fabricate BT thin films on stainless steel (SS) and quartz substrates by spin coating. Then thin films from both synthesis routes were characterized by Ultraviolet-Visible-Near Infrared (UV-Vis-…
▽ More
Barium titanate, BaTiO3 (BT), materials have been synthesized by two different routes: one ball-mill-derived (BMD) nanopowder and another precursor-derived (PCD) BT synthesis method were used separately to fabricate BT thin films on stainless steel (SS) and quartz substrates by spin coating. Then thin films from both synthesis routes were characterized by Ultraviolet-Visible-Near Infrared (UV-Vis-NIR) Spectroscopy, Field-Emission Scanning Electron Microscopy (FE-SEM), X-ray Diffractometry (XRD), Raman Spectroscopy, and Four-point collinear probe; all carried out at room temperature. Our studies revealed that the PCD synthesis process did not produce the BT phase even under the 900^0C air-annealing condition. In contrast, a homogeneous BT thin film has been formed from the BMD-BT nanopowder. The optical band gap of BMD-BT thin films was found in the 3.10 - 3.28 eV range. Finally, a Graphene-Barium Titanate-Graphene (G-BT-G) structure was fabricated on a SS substrate by spin coating at processing temperatures below 100^0C and characterized by two different pieces of equipment: a Potentiostat/Galvanostat (PG-STAT) and a Precision Impedance Analyzer (PIA). The G-BT-G structure exhibited a capacitance of 8 nF and 7.15 nF, a highest dielectric constant of 800 and 790, and a low dielectric loss of 4.5 and 5, investigated by PG-STAT and PIA equipment, respectively.
△ Less
Submitted 17 June, 2023;
originally announced June 2023.
-
Non-equilibrium dynamics of bosons with dipole symmetry: Large-$N$ Keldysh approach
Authors:
Md Mursalin Islam,
K. Sengupta,
Rajdeep Sensarma
Abstract:
We study the quench and the ramp dynamics of interacting $N$-component charged bosons with dipole symmetry using Schwinger-Keldysh field theory in the large $N$ limit. The equilibrium phase diagram of these bosons shows two phases in the large $N$ limit. The first is a normal phase where both the global $U(N)$ and the dipole symmetries are conserved and the second is a delocalized condensed phase…
▽ More
We study the quench and the ramp dynamics of interacting $N$-component charged bosons with dipole symmetry using Schwinger-Keldysh field theory in the large $N$ limit. The equilibrium phase diagram of these bosons shows two phases in the large $N$ limit. The first is a normal phase where both the global $U(N)$ and the dipole symmetries are conserved and the second is a delocalized condensed phase where both the symmetries are broken. In contrast, our explicit computation of the steady state after an instantaneous quantum quench from the condensed phase shows that an additional, novel, delocalized normal phase, where the global $U(N)$ symmetry is conserved but the dipole symmetry is broken, can exist for a range of quench parameters. A study of ramp dynamics of the model shows that the above-mentioned steady state exists only above a critical ramp rate which we estimate.
△ Less
Submitted 26 December, 2023; v1 submitted 22 May, 2023;
originally announced May 2023.
-
Structural, elastic, electronic, bonding, thermo-mechanical and optical properties of predicted NbAlB MAB phase in comparison to MoAlB: DFT based ab-initio insights
Authors:
Mst. Bina Aktar,
F. Parvin,
A. K. M. Azharul Islam,
S. H. Naqib
Abstract:
In this study, we have used density functional theory (DFT) based first-principles investigation of the physical properties of prospective NbAlB compound for the first time. From the analysis of the cohesive energy and enthalpy of formation, it was found that NbAlB is chemically stable. The physical properties of NbAlB have been compared and contrasted with those obtained for MoAlB. Both these MAB…
▽ More
In this study, we have used density functional theory (DFT) based first-principles investigation of the physical properties of prospective NbAlB compound for the first time. From the analysis of the cohesive energy and enthalpy of formation, it was found that NbAlB is chemically stable. The physical properties of NbAlB have been compared and contrasted with those obtained for MoAlB. Both these MAB phases are elastically anisotropic, mechanically stable, machinable and brittle materials. Structural and elastic features reflect the layered features. The estimated hardness of NbAlB is 19.0 GPa comparable to that of MoAlB (20.8 GPa) suggesting that predicted NbAlB is a hard compound and is suitable for heavy duty industrial applications. NbAlB is more machinable than MoAlB. Electronic band structure calculations reveal conventional metallic behavior with the electronic density of states at the Fermi level arising mainly due to the Nb 4d orbitals in NbAlB. The electronic density of states at the Fermi level is significantly higher in NbAlB in comparison to MoAlB, indicating that NbAlB is expected to exhibit higher level of electrical conductivity. Electronic dispersion is highly anisotropic for both MoAlB and NbAlB with substantially large electronic effective masses in the out-of-plane directions. The bonding features have been elucidated via the analysis of the band structure and charge density distribution. Both the compounds have mixed covalent, ionic and metallic bonding characteristics. The Fermi surfaces of MoAlB and NbAlB consists of electron and hole like sheets. The Debye temperatures of MoAlB and NbAlB are comparable. The estimated melting temperature of NbAlB is somewhat lower than that of MoAlB. NbAlB shows excellent reflection characteristics suitable to be used as an efficient solar reflector. NbAlB is also expected to absorb ultraviolet radiation very effectively.
△ Less
Submitted 21 May, 2023;
originally announced May 2023.
-
Magnetic excitation spectrum and Hamiltonian of the quantum spin chain BaCuTe2O6
Authors:
A. Samartzis,
S. Chillal,
H. O. Jeschke,
D. J. Voneshen,
Z. Lu,
A. T. M. N. Islam,
B. Lake
Abstract:
The magnetic excitation spectrum and Hamiltonian of the quantum magnet BaCuTe2O6 is studied by inelastic neutron scattering (INS) and density functional theory (DFT). INS on powder and single crystal samples reveals overlapping spinon continuua - the spectrum of an antiferromagnetic spin-1/2 spin chain - due to equivalent chains running along the a, b, and c directions. Long-range magnetic order o…
▽ More
The magnetic excitation spectrum and Hamiltonian of the quantum magnet BaCuTe2O6 is studied by inelastic neutron scattering (INS) and density functional theory (DFT). INS on powder and single crystal samples reveals overlapping spinon continuua - the spectrum of an antiferromagnetic spin-1/2 spin chain - due to equivalent chains running along the a, b, and c directions. Long-range magnetic order onsets below TN = 6.3 K due to interchain interactions, and is accompanied by the emergence of sharp spin-wave excitations which replace the continuua at low energies. The spin-wave spectrum is highly complex and was successfully modelled achieving excellent agreement with the data. The extracted interactions reveal an intrachain interaction, J3 = 2.9 meV, while the antiferromagnetic hyperkagome interaction J2, is the sub-leading interaction responsible for coupling the chains together in a frustrated way. DFT calculations reveal a similar picture for BaCuTe2O6 of dominant J3 and sub-leading J2 antiferromagnetic interactions and also indicate a high sensitivity of the interactions to small changes of structure which could explain the very different Hamiltonians observed in the sister compounds SrCuTe2O6 and PbCuTe2O6.
△ Less
Submitted 5 May, 2023;
originally announced May 2023.
-
Substitution of Lead with Tin Suppresses Ionic Transport in Halide Perovskite Optoelectronics
Authors:
Krishanu Dey,
Dibyajyoti Ghosh,
Matthew Pilot,
Samuel R Pering,
Bart Roose,
Priyanka Deswal,
Satyaprasad P Senanayak,
Petra J Cameron,
M Saiful Islam,
Samuel D Stranks
Abstract:
Despite the rapid rise in the performance of a variety of perovskite optoelectronic devices with vertical charge transport, the effects of ion migration remain a common and longstanding Achilles heel limiting the long-term operational stability of lead halide perovskite devices. However, there is still limited understanding of the impact of tin (Sn) substitution on the ion dynamics of lead (Pb) ha…
▽ More
Despite the rapid rise in the performance of a variety of perovskite optoelectronic devices with vertical charge transport, the effects of ion migration remain a common and longstanding Achilles heel limiting the long-term operational stability of lead halide perovskite devices. However, there is still limited understanding of the impact of tin (Sn) substitution on the ion dynamics of lead (Pb) halide perovskites. Here, we employ scan-rate-dependent current-voltage measurements on Pb and mixed Pb-Sn perovskite solar cells to show that short circuit current losses at lower scan rates, which can be traced to the presence of mobile ions, are present in both kinds of perovskites. To understand the kinetics of ion migration, we carry out scan-rate-dependent hysteresis analyses and temperature-dependent impedance spectroscopy measurements, which demonstrate suppressed ion migration in Pb-Sn devices compared to their Pb-only analogues. By linking these experimental observations to first-principles calculations on mixed Pb-Sn perovskites, we reveal the key role played by Sn vacancies in increasing the iodide ion migration barrier due to local structural distortions. These results highlight the beneficial effect of Sn substitution in mitigating undesirable ion migration in halide perovskites, with potential implications for future device development.
△ Less
Submitted 3 May, 2023;
originally announced May 2023.
-
Effect of magnetic field on the electronic properties of an $α$-$T_3$ ring
Authors:
Mijanur Islam,
Tutul Biswas,
Saurabh Basu
Abstract:
We consider a quantum ring of a certain radius R built from a sheet of the $α$-$T_3$ lattice and solve for its spectral properties in presence of an external magnetic field. The energy spectrum consists of a conduction band, a valence band and a zero energy flat band, all having a number of discrete levels therein which can be characterized by the angular momentum quantum number, m. The energy lev…
▽ More
We consider a quantum ring of a certain radius R built from a sheet of the $α$-$T_3$ lattice and solve for its spectral properties in presence of an external magnetic field. The energy spectrum consists of a conduction band, a valence band and a zero energy flat band, all having a number of discrete levels therein which can be characterized by the angular momentum quantum number, m. The energy levels in the flat band are infinitely degenerate irrespective of the value of $α$. We reveal a two-fold degeneracy of the levels in the conduction band as well as in the valence band for $α$ = 0 and $α$ = 1. However, the m = 0 level for $α$ = 1 is an exception. Corresponding to an intermediate value of $α$, namely, 0 <$α$< 1, the energy levels become nondegenerate. The scenario remains unaltered when the ring is threaded by a magnetic flux which is an integer multiple of the flux quantum. We also calculate the persistent current which exhibits quantum oscillations as a function of the magnetic field with a period of one flux quantum at a particular Dirac point, which is often referred to as a valley. The total current oscillates with a periodicity of one flux quantum for any intermediate value of $α$. We have also explored the effect of a mass term (that breaks the sublattice symmetry) in the Hamiltonian. In the absence of a magnetic field, the energy levels in the flat band become dispersive, except for the m = 0 level in the case of $α$ = 1. In presence of the field, each of the flat band levels becomes dispersive for any $α\neq$ 0. Finally, we also see the effect of the mass term on the behaviour of the persistent current, which shows periodicity of one flux quantum, but the total current remains finite for all values of $α$.
△ Less
Submitted 14 September, 2023; v1 submitted 18 April, 2023;
originally announced April 2023.
-
In-Grain Ferroelectric Switching in Sub-5 nm Thin AlScN Films at 1 V
Authors:
Georg Schönweger,
Niklas Wolff,
Md Redwanul Islam,
Maike Gremmel,
Adrian Petraru,
Lorenz Kienle,
Hermann Kohlstedt,
Simon Fichtner
Abstract:
Analog switching in ferroelectric devices promises neuromorphic computing with highest energy efficiency, if limited device scalability can be overcome. To contribute to a solution, we report on the ferroelectric switching characteristics of sub-5 nm thin Al$_{0.74}$Sc$_{0.26}$N films grown on Pt/Ti/SiO2/Si and epitaxial Pt/GaN/sapphire templates by sputter-deposition. In this context, we focus on…
▽ More
Analog switching in ferroelectric devices promises neuromorphic computing with highest energy efficiency, if limited device scalability can be overcome. To contribute to a solution, we report on the ferroelectric switching characteristics of sub-5 nm thin Al$_{0.74}$Sc$_{0.26}$N films grown on Pt/Ti/SiO2/Si and epitaxial Pt/GaN/sapphire templates by sputter-deposition. In this context, we focus on the following major achievements compared to previously available wurtzite-type ferroelectrics: 1) Record low switching voltages down to 1 V are achieved, which is in a range that can be supplied by standard on-chip voltage sources. 2) Compared to the previously investigated deposition of thinnest Al$_{1-x}$Sc$_x$N films on epitaxial templates, a significantly larger coercive field to breakdown field ratio is observed for Al$_{0.74}$Sc$_{0.26}$N films grown on silicon substrates, the technologically most relevant substrate-type. 3) The formation of true ferroelectric domains in wurtzite-type materials is for the first time demonstrated on the atomic scale by scanning transmission electron microscopy investigations of a sub-5 nm thin partially switched film. The direct observation of inversion domain boundaries within single nm-sized grains supports the theory of a gradual domain-wall motion limited switching process in wurtzite-type ferroelectrics. Ultimately, this should enable the analog switching necessary for mimicking neuromorphic concepts also in highly scaled devices.
△ Less
Submitted 6 April, 2023;
originally announced April 2023.
-
Field-induced effects in the spin liquid candidate PbCuTe$_{2}$O$_{6}$
Authors:
Paul Eibisch,
Christian Thurn,
Arif Ata,
Ulrich Tutsch,
Yohei Saito,
Steffi Hartmann,
Bernd Wolf,
Abanoub R. N. Hanna,
A. T. M. Nazmul Islam,
Shravani Chillal,
Bella Lake,
Michael Lang
Abstract:
PbCuTe$_2$O$_6$ is considered as one of the rare candidate materials for a three-dimensional quantum spin liquid (QSL). This assessment was based on the results of various magnetic experiments, performed mainly on polycrystalline material. More recent measurements on single crystals revealed an even more exotic behavior, yielding ferroelectric order below $T_{\text{FE}}\approx 1\,\text{K}$, accomp…
▽ More
PbCuTe$_2$O$_6$ is considered as one of the rare candidate materials for a three-dimensional quantum spin liquid (QSL). This assessment was based on the results of various magnetic experiments, performed mainly on polycrystalline material. More recent measurements on single crystals revealed an even more exotic behavior, yielding ferroelectric order below $T_{\text{FE}}\approx 1\,\text{K}$, accompanied by distinct lattice distortions, and a somewhat modified magnetic response which is still consistent with a QSL. Here we report on low-temperature measurements of various thermodynamic, magnetic and dielectric properties of single crystalline PbCuTe$_2$O$_6$ in magnetic fields $B\leq 14.5\,\text{T}$. The combination of these various probes allows us to construct a detailed $B$-$T$ phase diagram including a ferroelectric phase for $B \leq$ $8\,\text{T}$ and a $B$-induced magnetic phase at $B \geq$ $11\,\text{T}$. These phases are preceded by or coincide with a structural transition from a cubic high-temperature phase into a distorted non-cubic low-temperature state. The phase diagram discloses two quantum critical points (QCPs) in the accessible field range, a ferroelectric QCP at $B_{c1}$ = $7.9\,\text{T}$ and a magnetic QCP at $B_{c2}$ = $11\,\text{T}$. Field-induced lattice distortions, observed in the state at $T>$ $1\,\text{K}$ and which are assigned to the effect of spin-orbit interaction of the Cu$^{2+}$-ions, are considered as the key mechanism by which the magnetic field couples to the dielectric degrees of freedom in this material.
△ Less
Submitted 9 May, 2023; v1 submitted 27 February, 2023;
originally announced February 2023.
-
High Pressure and Temperature Neural Network Reactive Force Field for Energetic Materials
Authors:
Brenden W. Hamilton,
Pilsun Yoo,
Michael N. Sakano,
Md Mahbubul Islam,
Alejandro Strachan
Abstract:
Reactive force fields for molecular dynamics have enabled a wide range of studies in numerous material classes. These force fields are computationally inexpensive as compared to electronic structure calculations and allow for simulations of millions of atoms. However, the accuracy of traditional force fields is limited by their functional forms, preventing continual refinement and improvement. The…
▽ More
Reactive force fields for molecular dynamics have enabled a wide range of studies in numerous material classes. These force fields are computationally inexpensive as compared to electronic structure calculations and allow for simulations of millions of atoms. However, the accuracy of traditional force fields is limited by their functional forms, preventing continual refinement and improvement. Therefore, we develop a neural network based reactive interatomic potential for the prediction of the mechanical, thermal, and chemical response of energetic materials at extreme conditions for energetic materials. The training set is expanded in an automatic iterative approach and consists of various CHNO materials and their reactions under ambient and under shock loading conditions. This new potential shows improved accuracy over the current state of the art force fields for a wide range of properties such as detonation performance, decomposition product formation, and vibrational spectra under ambient and shock loading conditions.
△ Less
Submitted 9 February, 2023;
originally announced February 2023.
-
Anion-polarisation-directed short-range-order in antiperovskite Li$_2$FeSO
Authors:
Samuel W. Coles,
Viktoria Falkowski,
Harry S. Geddes,
Gabriel E. Pérez,
Samuel G. Booth,
Alexander G. Squires,
Conn O'Rourke,
Kit McColl,
Andrew L. Goodwin,
Serena A. Cussen,
Simon J. Clarke,
M. Saiful Islam,
Benjamin J. Morgan
Abstract:
Short-range ordering in cation-disordered cathodes can have a significant effect on their electrochemical properties. Here, we characterise the cation short-range order in the antiperovskite cathode material Li$_2$FeSO, using density functional theory, Monte Carlo simulations, and synchrotron X-ray pair-distribution-function data. We predict partial short-range cation-ordering, characterised by fa…
▽ More
Short-range ordering in cation-disordered cathodes can have a significant effect on their electrochemical properties. Here, we characterise the cation short-range order in the antiperovskite cathode material Li$_2$FeSO, using density functional theory, Monte Carlo simulations, and synchrotron X-ray pair-distribution-function data. We predict partial short-range cation-ordering, characterised by favourable OLi$_4$Fe$_2$ oxygen coordination with a preference for polar cis-OLi$_4$Fe$_2$ over non-polar trans-OLi$_4$Fe$_2$ configurations. This preference for polar cation configurations produces long-range disorder, in agreement with experimental data. The predicted short-range-order preference contrasts with that for a simple point-charge model, which instead predicts preferential trans-OLi$_4$Fe$_2$ oxygen coordination and corresponding long-range crystallographic order. The absence of long-range order in Li$_2$FeSO can therefore be attributed to the relative stability of cis-OLi$_4$Fe$_2$ and other non-OLi$_4$Fe$_2$ oxygen-coordination motifs. We show that this effect is associated with the polarisation of oxide and sulfide anions in polar coordination environments, which stabilises these polar short-range cation orderings. We propose similar anion-polarisation-directed short-range-ordering may be present in other heterocationic materials that contain cations with different formal charges. Our analysis also illustrates the limitations of using simple point-charge models to predict the structure of cation-disordered materials, where other factors, such as anion polarisation, may play a critical role in directing both short- and long-range structural correlations.
△ Less
Submitted 27 April, 2023; v1 submitted 27 December, 2022;
originally announced December 2022.
-
Electric control of spin states in frustrated triangular molecular magnets
Authors:
J. F. Nossa,
M. F. Islam,
Mark R. Pederson,
C. M. Canali
Abstract:
Frustrated triangular molecular magnets are a very important class of magnetic molecules since the absence of inversion symmetry allows an external electric field to couple directly with the spin chirality that characterizes their ground state. The spin-electric coupling in these molecular magnets leads to an efficient and fast method of manipulating spin states, making them an exciting candidate…
▽ More
Frustrated triangular molecular magnets are a very important class of magnetic molecules since the absence of inversion symmetry allows an external electric field to couple directly with the spin chirality that characterizes their ground state. The spin-electric coupling in these molecular magnets leads to an efficient and fast method of manipulating spin states, making them an exciting candidate for quantum information processing. The efficiency of the spin-electric coupling depends on the electric dipole coupling between the chiral ground states of these molecules. In this paper, we report on first-principles calculations of spin-electric coupling in $\{V_3\}$ triangular magnetic molecule. We have explicitly calculated the spin-induced charge redistribution within the magnetic centers that is responsible for the spin-electric coupling. Furthermore, we have generalized the method of calculating the strength of the spin-electric coupling to calculate any triangular spin 1/2 molecule with $C_3$ symmetry and have applied it to calculate the coupling strength in $\{V_{15}\}$ molecular magnets.
△ Less
Submitted 7 December, 2022;
originally announced December 2022.
-
Magic Fermions: Carroll and Flat Bands
Authors:
Arjun Bagchi,
Aritra Banerjee,
Rudranil Basu,
Minhajul Islam,
Saikat Mondal
Abstract:
The Carroll algebra is constructed as the $c\to0$ limit of the Poincare algebra and is associated to symmetries on generic null surfaces. In this paper, we begin investigations of Carrollian fermions or fermions defined on generic null surfaces. Due to the availability of two different (degenerate) metrics on Carroll spacetimes, there is the possibility of two different versions of Carroll Cliffor…
▽ More
The Carroll algebra is constructed as the $c\to0$ limit of the Poincare algebra and is associated to symmetries on generic null surfaces. In this paper, we begin investigations of Carrollian fermions or fermions defined on generic null surfaces. Due to the availability of two different (degenerate) metrics on Carroll spacetimes, there is the possibility of two different versions of Carroll Clifford algebras. We consider both possibilities and construct explicit representations of Carrollian gamma matrices and show how to build higher spacetime dimensional representations out of lower ones. Actions for Carroll fermions are constructed with these gamma matrices and the properties of these actions are investigated.
We show that in condensed matter systems where the dispersion relation becomes trivial i.e. the energy is not dependent on momentum and bands flatten out, Carroll symmetry generically appears. We give explicit examples of this including that of twisted bi-layer graphene, where superconductivity appears at so called magic angles and connect this to Carroll fermions.
△ Less
Submitted 21 November, 2022;
originally announced November 2022.
-
Temperature-Dependent Dynamic Disproportionation in LiNiO$_2$
Authors:
Andrey D. Poletayev,
Robert J. Green,
Jack E. N. Swallow,
Lijin An,
Leanne Jones,
Grant Harris,
Peter Bencok,
Ronny Sutarto,
Jonathon P. Cottom,
Benjamin J. Morgan,
Robert A. House,
Robert S. Weatherup,
M. Saiful Islam
Abstract:
Nickelate materials offer diverse functionalities for energy and computing applications. Lithium nickel oxide (LiNiO$_2$) is an archetypal layered nickelate, but the electronic structure of this correlated material is not yet fully understood. Here we investigate the temperature-dependent speciation and spin dynamics of Ni ions in LiNiO$_2$. Our ab initio simulations predict that Ni ions dispropor…
▽ More
Nickelate materials offer diverse functionalities for energy and computing applications. Lithium nickel oxide (LiNiO$_2$) is an archetypal layered nickelate, but the electronic structure of this correlated material is not yet fully understood. Here we investigate the temperature-dependent speciation and spin dynamics of Ni ions in LiNiO$_2$. Our ab initio simulations predict that Ni ions disproportionate into three states, which dynamically interconvert and whose populations vary with temperature. These predictions are verified using x-ray absorption spectroscopy, x-ray magnetic circular dichroism, and resonant inelastic x-ray scattering at the Ni L$_{3,2}$-edge. Charge-transfer multiplet calculations consistent with disproportionation reproduce all experimental features. Together, our experimental and computational results support a model of dynamic disproportionation that explains diverse physical observations of LiNiO$_2$, including magnetometry, thermally activated electronic conduction, diffractometry, core-level spectroscopies, and the stability of ubiquitous antisite defects. This unified understanding of the fundamental material properties of LiNiO$_2$ is important for applications of nickelate materials as battery cathodes, catalysts, and superconductors.
△ Less
Submitted 2 July, 2024; v1 submitted 16 November, 2022;
originally announced November 2022.
-
A comparative study of the structural, elastic, thermophysical, and optoelectronic properties of CaZn$_2$X$_2$ (X = N, P, As) semiconductors via ab-initio approach
Authors:
Md. Sajidul Islam,
Razu Ahmed,
Md. Mahamudujjaman,
R. S. Islam,
S. H. Naqib
Abstract:
We present a detailed density functional theory based calculations of the structural, elastic, lattice dynamical, thermophysical, and optoelectronic properties of ternary semiconductors CaZn$_2$X$_2$ (X = N, P, As) in this paper. The obtained lattice parameters are in excellent agreement with the experimental values and other theoretical findings. These elastic constants satisfy the mechanical sta…
▽ More
We present a detailed density functional theory based calculations of the structural, elastic, lattice dynamical, thermophysical, and optoelectronic properties of ternary semiconductors CaZn$_2$X$_2$ (X = N, P, As) in this paper. The obtained lattice parameters are in excellent agreement with the experimental values and other theoretical findings. These elastic constants satisfy the mechanical stability criteria. Moreover, many thermophysical parameters of these compounds are estimated, including the Debye temperature, average sound velocity, melting temperature, heat capacity, lattice thermal conductivity, etc. The comprehensive analysis of the elastic constants and moduli show that CaZn$_2$X$_2$ compounds possess reasonably good machinability, relatively high Vickers hardness and relatively low Debye temperature. The phonon dispersion curves and phonon density of states are investigated for the first time for the compounds CaZn$_2$P$_2$ and CaZn$_2$As$_2$. It is observed from the phonon dispersion curves that the bulk CaZn$_2$X$_2$ (X = N, P, As) compounds are dynamically stable. Electronic properties have been studied through the band structures and electronic energy density of states. The electronic band structures show that CaZn$_2$N$_2$ and CaZn$_2$As$_2$ possess direct band gaps while the compound CaZn$_2$P$_2$ show indirect band gap. The bonding characters of CaZn$_2$X$_2$ (X = N, P, As) compounds are investigated. Energy dependent optical parameters exhibit good correspondence with the electronic energy density of states features. We have thoroughly discussed the reflectivity, absorption coefficient, refractive index, dielectric function, optical conductivity and loss function of these semiconductors. The optical absorption, reflectivity spectra and the refractive index of CaZn$_2$X$_2$ (X = N, P, As) show that the compounds hold promise to be used in optoelectronic devices.
△ Less
Submitted 31 October, 2022;
originally announced October 2022.
-
Compact Model of a Topological Transistor
Authors:
Md Mazharul Islam,
Shamiul Alam,
Md Shafayat Hossain,
Ahmedullah Aziz
Abstract:
The precession of a ferromagnet leads to the injection of spin current and heat into an adjacent non-magnetic material. Besides, spin-orbit entanglement causes an additional charge current injection. Such a device has been recently proposed where a quantum-spin hall insulator (QSHI) in proximity to a ferromagnetic insulator (FI) and superconductor (SC) leads to the pumping of charge, spin, and hea…
▽ More
The precession of a ferromagnet leads to the injection of spin current and heat into an adjacent non-magnetic material. Besides, spin-orbit entanglement causes an additional charge current injection. Such a device has been recently proposed where a quantum-spin hall insulator (QSHI) in proximity to a ferromagnetic insulator (FI) and superconductor (SC) leads to the pumping of charge, spin, and heat. Here we build a circuit-compatible Verilog-A-based compact model for the QSHI-FI-SC device capable of generating two topologically robust modes enabling the device operation. Our model also captures the dependence on the ferromagnetic precision, drain voltage, and temperature with an excellent (> 99%) accuracy.
△ Less
Submitted 7 October, 2022;
originally announced October 2022.
-
Comparative analysis of physical properties of some binary transition metal carbides XC (X = Nb, Ta, Ti): Insights from a comprehensive ab-initio study
Authors:
Razu Ahmed,
Md. Mahamudujjaman,
Md. Asif Afzal,
Md. Sajidul Islam,
R. S. Islam,
S. H. Naqib
Abstract:
Binary metallic carbides belong to a technologically prominent class of materials. We have explored the structural, mechanical, electronic, optical, and some thermophysical properties of XC (X = Nb, Ta, Ti) binary metallic carbides in details employing first-principles method. Some of the results obtained are novel. A comparative analysis has been made.
Binary metallic carbides belong to a technologically prominent class of materials. We have explored the structural, mechanical, electronic, optical, and some thermophysical properties of XC (X = Nb, Ta, Ti) binary metallic carbides in details employing first-principles method. Some of the results obtained are novel. A comparative analysis has been made.
△ Less
Submitted 23 September, 2022;
originally announced September 2022.
-
Electrical and thermal transport through $α-T_3$ NIS junction
Authors:
Mijanur Islam,
Priyadarshini Kapri
Abstract:
We investigate the electrical and thermal transport properties of the $α-T_3$ based normal metal-insulator-superconductor (NIS) junction using Blonder-Tinkham-Klapwijk (BTK) theory. We show that the tunneling conductance of the NIS junction is an oscillatory function of the effective barrier potential ($χ$) of the insulating region upto a thin barrier limit. The periodicity and the amplitudes of t…
▽ More
We investigate the electrical and thermal transport properties of the $α-T_3$ based normal metal-insulator-superconductor (NIS) junction using Blonder-Tinkham-Klapwijk (BTK) theory. We show that the tunneling conductance of the NIS junction is an oscillatory function of the effective barrier potential ($χ$) of the insulating region upto a thin barrier limit. The periodicity and the amplitudes of the oscillations largely depend on the values of $α$ and the gate voltage of the superconducting region, namely, $U_0$. Further, the periodicity of the oscillation changes from $π$ to $π/2$ as we increase $U_0$. To assess the thermoelectric performance of such a junction, we have computed the Seebeck coefficient, the thermoelectric figure of merit, maximum power output, efficiency at the maximum output power of the system, and the thermoelectric cooling of the NIS junction as a self-cooling device. Our results on the thermoelectric cooling indicate practical realizability and usefulness for using our system as efficient cooling detectors, sensors, etc., and hence could be crucial to the experimental success of the thermoelectric applications of such junction devices. Furthermore, for an $α-T_3$ lattice, whose limiting cases denote a graphene or a dice lattice, it is interesting to ascertain which one is more suitable as a thermoelectric device and the answer seems to depend on the $U_0$. We observe that for an $α-T_3$ lattice corresponding to $U_0=0$, graphene ($α=0$) is more feasible for constructing a thermoelectric device, whereas for $U_0 \gg E_F$, the dice lattice ($α=1$) has a larger utility.
△ Less
Submitted 13 September, 2022;
originally announced September 2022.
-
Pinch points and half-moons in dipolar-octupolar Nd$_2$Hf$_2$O$_7$
Authors:
A. Samartzis,
J. Xu,
V. K. Anand,
A. T. M. N. Islam,
J. Ollivier,
Y. Su,
B. Lake
Abstract:
While it is established that the pinch point scattering pattern in spin ice arises from an emergent coulomb phase associated with magnetic moment that is divergence-free, more complex Hamiltonians can introduce a divergence-full part. If these two parts remain decoupled, they give rise to the co-existence of distinct features. Here we show that the moment in ${\rm Nd_2Hf_2O_7}$ forms a static long…
▽ More
While it is established that the pinch point scattering pattern in spin ice arises from an emergent coulomb phase associated with magnetic moment that is divergence-free, more complex Hamiltonians can introduce a divergence-full part. If these two parts remain decoupled, they give rise to the co-existence of distinct features. Here we show that the moment in ${\rm Nd_2Hf_2O_7}$ forms a static long-range ordered ground state, a flat, gapped pinch point excitation and dispersive excitations. These results confirm recent theories which predict that the dispersive modes, which arise from the divergence-full moment, host a pinch point pattern of their own, observed experimentally as `half-moons'.
△ Less
Submitted 8 September, 2022; v1 submitted 25 August, 2022;
originally announced August 2022.
-
Data-Driven Machine Learning to Predict Mechanical Properties of Monolayer TMDs
Authors:
Prottay Malakar,
Md Shajedul Hoque Thakur,
Shahriar Muhammad Nahid,
Md Mahbubul Islam
Abstract:
The understanding of the material properties of the layered transition metal dichalcogenides (TMDs) is critical for their applications in structural composites. The data-driven machine learning (ML) based approaches are being developed in contrast to traditional experimental or computational approach to predict and understand materials properties under varied operating conditions. In this study, w…
▽ More
The understanding of the material properties of the layered transition metal dichalcogenides (TMDs) is critical for their applications in structural composites. The data-driven machine learning (ML) based approaches are being developed in contrast to traditional experimental or computational approach to predict and understand materials properties under varied operating conditions. In this study, we used two ML algorithms such as Long Short-Term Memory (LSTM) and Feed Forward Neural Network (FFNN) combined with molecular dynamics (MD) simulations to predict the mechanical properties of MX2 (M = Mo, W, and X = S, Se) TMDs. The LSTM model is found to be capable of predicting the entire stress-strain response whereas the FFNN is used to predict the material properties such as fracture stress, fracture strain, and Young's modulus. The effects of operating temperature, chiral orientation, and pre-existing crack size on the mechanical properties are thoroughly investigated. We carried out 1440 MD simulations to produce the input dataset for the neural network models. Our results indicate that both LSTM and FFNN are capable of predicting the mechanical response of monolayer TMDs under different conditions with more than 95% accuracy. The FFNN model exhibits lower computational cost than LSTM; however, the capability of LSTM model to predict the entire stress-strain curve is advantageous to assess material properties. The study paves the pathway toward extending this approach to predict other important properties, such as optical, electrical, and magnetic properties of TMDs.
△ Less
Submitted 10 August, 2022;
originally announced August 2022.
-
The rise of 212 MAX phase borides, Ti$_2$PB$_2$, Zr$_2$PbB$_2$, and Nb$_2$AB$_2$ [A = P, S]: DFT insights into the physical properties for thermo-mechanical applications
Authors:
M. A. Ali,
M. M. Hossain,
M. M. Uddin,
A. K. M. A. Islam,
S. H. Naqib
Abstract:
An interesting class of ternary metallic borides, known as the 212 MAX phase borides, is the recent advancement of the MAX phase family. In this article, results from ab-initio calculations on unexplored Ti$_2$PB$_2$, Zr$_2$PbB$_2$, and Nb$_2$AB$_2$ [A = P, S] are reported wherein Ti$_2$PB$_2$ along with its 211 boride phase Ti$_2$PB are predicted for the first time. The stability was confirmed by…
▽ More
An interesting class of ternary metallic borides, known as the 212 MAX phase borides, is the recent advancement of the MAX phase family. In this article, results from ab-initio calculations on unexplored Ti$_2$PB$_2$, Zr$_2$PbB$_2$, and Nb$_2$AB$_2$ [A = P, S] are reported wherein Ti$_2$PB$_2$ along with its 211 boride phase Ti$_2$PB are predicted for the first time. The stability was confirmed by calculating the formation energy, phonon dispersion curve, and elastic stiffness constants. The obtained elastic constants, elastic moduli, and Vickers hardness values of Ti$_2$PB$_2$, Zr$_2$PbB$_2$, and Nb$_2$AB$_2$ [A = P, S] were found to be significantly larger than those of their counterparts 211 borides and carbides, in a trend similar to other 212 borides. The studied compounds are brittle like most of the MAX and MAB phases. The electronic band structure and density of states revealed the metallic nature of the titled borides. Several thermal parameters were explored, certifying the suitability of Ti2PB2, Zr2PbB2, and Nb2AB2 [A = P, S] compared to their counterparts, and a similar trend was found for the other 212 borides. The obtained results predict that Ti2PB2, Zr2PbB2, and Nb2AB2 [A = P, S] have significant potential for use as efficient thermal barrier coating materials. The response of Ti$_2$PB$_2$, Zr$_2$PbB$_2$, and Nb$_2$AB$_2$ [A = P, S] to the incident photon was studied by computing the dielectric constant (real and imaginary part), refractive index, absorption coefficient, photoconductivity, reflectivity, and energy loss function. The ability to protect from solar heating was revealed from the studied reflectivity spectra. In this work, we have explored the physical basis of the improved thermo-mechanical properties of 212 MAX phase borides compared to their carbide and boride counterparts.
△ Less
Submitted 2 September, 2022; v1 submitted 17 July, 2022;
originally announced July 2022.
-
Understanding Mechanical Characteristics of FeNiCrCoCu HEA in Nanoscale Laser Powder Bed Fusion via Molecular Dynamics
Authors:
Ishat Raihan Jamil,
Ali Muhit Mustaquim,
Mahmudul Islam,
Mohammad Nasim Hasan
Abstract:
The concept of alloying multiple principal elements at high concentrations has led to the development of High Entropy Alloys (HEAs) with exceptional mechanical properties, making them the focus of major recent scientific endeavors. Geometrically complex HEAs with tailored microstructural characteristics can be produced using additive manufacturing technologies such as powder bed fusion (PBF). Howe…
▽ More
The concept of alloying multiple principal elements at high concentrations has led to the development of High Entropy Alloys (HEAs) with exceptional mechanical properties, making them the focus of major recent scientific endeavors. Geometrically complex HEAs with tailored microstructural characteristics can be produced using additive manufacturing technologies such as powder bed fusion (PBF). However, an in-depth study on the effect of process thermal conditions during PBF is required to effectively fabricate HEAs with desirable mechanical characteristics. Thus, in our present molecular dynamic (MD) study we have explored the implication of PBF process thermal conditions on the mechanical characteristics of FeNiCrCoCu HEA by systematically varying laser scan speed from 0.4 Å/ps to 0.1 Å/ps, unidirectional and reversing laser passes from 1 to 4, and laser power from 100 microwatts to 220 microwatts. Our investigation suggests that reducing the laser scanning speed up to a critical velocity of 0.2 Å/ps considerably improves mechanical strengths, with further reduction creating severe surface defects. Decreased ultimate tensile strength (UTS) is associated with the annihilation of the bulk sessile dislocations during tensile straining marking an early yield failure. Alternately, the material's strength could be improved by annealing with several unidirectional laser passes over the same target region, resulting in enhanced UTS due to subtler yield points. Increasing laser power aids in ameliorating material density ultimately leading to higher UTS even in non-dislocation-free structures. These findings will assist researchers to understand the underlying effects and optimize process thermal parameters to fabricate superior HEAs utilizing additive manufacturing.
△ Less
Submitted 17 July, 2022;
originally announced July 2022.
-
Ultrathin AlScN for low-voltage driven ferroelectric-based devices
Authors:
Georg Schönweger,
Md Redwanul Islam,
Niklas Wolff,
Adrian Petraru,
Lorenz Kienle,
Hermann Kohlstedt,
Simon Fichtner
Abstract:
Thickness scaling of ferroelectricity in AlScN is a determining factor for its potential application in neuromorphic computing and memory devices. In this letter, we report on ultrathin (10 nm) Al0.72Sc0.28N films that are ferroelectrically switchable at room temperature. All-epitaxial Al0.72Sc0.28N/Pt heterostructures are grown by magnetron sputtering onto GaN/sapphire substrates followed by an i…
▽ More
Thickness scaling of ferroelectricity in AlScN is a determining factor for its potential application in neuromorphic computing and memory devices. In this letter, we report on ultrathin (10 nm) Al0.72Sc0.28N films that are ferroelectrically switchable at room temperature. All-epitaxial Al0.72Sc0.28N/Pt heterostructures are grown by magnetron sputtering onto GaN/sapphire substrates followed by an in situ Pt capping approach to avoid oxidation of the Al0.72Sc0.28N film surface. Structural characterization by X-ray diffraction and transmission electron microscopy reveals the established epitaxy. The thus obtained high-quality interfaces in combination with the in situ capping is expected to facilitate ferroelectric switching of AlScN in the ultrathin regime. The analysis of the relative permittivity and coercive field dependence on the Al0.72Sc0.28N film thicknesses in the range of 100 nm down to 10 nm indicates only moderate scaling effects, suggesting that the critical thickness for ferroelectricity is not yet approached. Furthermore, the deposited layer stack demonstrates the possibility of including ultrathin ferroelectric AlScN into all-epitaxial GaN-based devices using sputter deposition techniques. Thus, our work highlights the integration and scaling potential of all-epitaxial ultrathin AlScN offering high storage density paired with low voltage operation desired for state of the art ferroelectric memory devices.
△ Less
Submitted 5 July, 2022;
originally announced July 2022.
-
Disentangling structural and electronic properties in V$_{2}$O$_{3}$ thin films: a genuine non-symmetry breaking Mott transition
Authors:
Federico Mazzola,
Sandeep Kumar Chaluvadi,
Vincent Polewczyk,
Debashis Mondal,
Jun Fujii,
Piu Rajak,
Mahabul Islam,
Regina Ciancio,
Luisa Barba,
Michele Fabrizio,
Giorgio Rossi,
Pasquale Orgiani,
Ivana Vobornik
Abstract:
Phase transitions are key in determining and controlling the quantum properties of correlated materials. Here, by using the powerful combination of precise material synthesis and angle resolved photoelectron spectroscopy, we show evidence for a genuine Mott transition undressed of any symmetry breaking side effects in the thin-films of V$_{2}$O$_{3}$. In particular, and in sharp contrast with the…
▽ More
Phase transitions are key in determining and controlling the quantum properties of correlated materials. Here, by using the powerful combination of precise material synthesis and angle resolved photoelectron spectroscopy, we show evidence for a genuine Mott transition undressed of any symmetry breaking side effects in the thin-films of V$_{2}$O$_{3}$. In particular, and in sharp contrast with the bulk V$_{2}$O$_{3}$ crystals, we unveil the purely electronic dynamics approaching the metal-insulator transition, disentangled from the structural transformation that is prevented by the residual substrate-induced strain. On approaching the transition, the spectral signal evolves surprisingly slowly over a wide temperature range, the Fermi wave-vector does not change, and the critical temperature appears to be much lower than the one reported for the bulk. Our findings are on one side fundamental in demonstrating the universal benchmarks of a genuine non-symmetry breaking Mott transition, extendable to a large array of correlated quantum systems and, on the other, given that the fatal structural breakdown is avoided, they hold promise of exploiting the metal-insulator transition by implementing V$_{2}$O$_{3}$ thin films in devices.
△ Less
Submitted 1 July, 2022;
originally announced July 2022.
-
Role of shape anisotropy on thermal gradient-driven domain wall dynamics in magnetic nanowires
Authors:
M. T. Islam,
M. A. S. Akanda,
F. Yesmin,
M. A. J. Pikul,
J. M. T. Islam
Abstract:
We investigate the magnetic domain wall (DW) dynamics in uniaxial/biaxial nanowires under a thermal gradient (TG). The findings reveal that the DW propagates toward the hotter region in both nanowires. The main physics of such observations is the magnonic angular momentum transfer to the DW. The hard (shape) anisotropy exists in biaxial nanowire, which contributes an additional torque, hence DW sp…
▽ More
We investigate the magnetic domain wall (DW) dynamics in uniaxial/biaxial nanowires under a thermal gradient (TG). The findings reveal that the DW propagates toward the hotter region in both nanowires. The main physics of such observations is the magnonic angular momentum transfer to the DW. The hard (shape) anisotropy exists in biaxial nanowire, which contributes an additional torque, hence DW speed is larger than that in uniaxial nanowire. With lower damping, the DW velocity is smaller and DW velocity increases with damping which is opposite to usual expectation. To explain this, it is predicted that there is a probability to form the standing spin-waves (which do not carry net energy/momentum) together with travelling spin-waves if the propagation length of thermally-generated spin-waves is larger than the nanowire length. For larger-damping, DW decreases with damping since the magnon propagation length decreases. Therefore, the above findings might be useful in realizing the spintronic (racetrack memory) devices.
△ Less
Submitted 15 October, 2022; v1 submitted 19 April, 2022;
originally announced April 2022.