-
DFT mediated X2AuYZ6 (X= Cs, Rb; Z= Cl, Br, I) double Perovskites for photovoltaic and wasted heat management device applications
Authors:
S. Mahmud,
M. A. Ali,
M. M. Hossain,
M. M. Uddin
Abstract:
This paper presents the phase stability, opto-electronic and thermo-electric behavior of X2AuYZ6 (X = Cs, Rb; Z = Cl/Br/I) double perovskite halides by using the DFT method. The compounds belong to the cubic arrangement and are verified by the tolerance and octahedral factor. Formation enthalpy and binding energy meet the requirements of structural stability. The ductility behavior was also confir…
▽ More
This paper presents the phase stability, opto-electronic and thermo-electric behavior of X2AuYZ6 (X = Cs, Rb; Z = Cl/Br/I) double perovskite halides by using the DFT method. The compounds belong to the cubic arrangement and are verified by the tolerance and octahedral factor. Formation enthalpy and binding energy meet the requirements of structural stability. The ductility behavior was also confirmed by the Cauchy pressure, Pugh's ratio, and Poisson's ratio. The positive frequency of phonon dispersion except Rb2AuYI6 compound shows the dynamical stability and the negative formation energy of each identified competing phase confirms the thermo-dynamic equilibrium of all compounds. The band gap values of 2.85(2.91), 2.35(2.40), and 1.74(1.78) eV of Cs2AuYZ6 (Rb2AuYZ6) [Z = Cl, Br, I) double perovskites has been explored in the context of optoelectronic properties, and the results show that these materials might be useful in such devices. The spectral optical response covers the visible-to-UV area, which governs the solar cell and thermo-electric device applications. A comprehensive study of thermo-electric properties such as the thermal conductivity (electrical and electronic part), carrier concentration, thermo-power, and figure of merit was also observed. The investigated compounds [Cs (Rb)-based] exhibit ZT values of 0.51(0.55), 0.53(0.62), and 0.58(0.75) at room temperature with Cl, Br, and I respectively. Additional routine work was also done on the thermo-mechanical characteristics. These studies provide in-depth knowledge of these materials in preparation for their future use.
△ Less
Submitted 24 April, 2024;
originally announced April 2024.
-
Oxysulfide Perovskites: Reduction of the Electronic Band Gap of RbTaO3 by Sulfur Substitution to Enhance Prospective Solar Cell and Thermoelectric Performances
Authors:
H. Akter,
M. A. Ali,
M. M. Hossain,
M. M. Uddin,
S. H. Naqib
Abstract:
In this study, the effects of sulfur substitution on the structural, mechanical, electronic, optical, and thermodynamic properties of RbTaO3-xSx have been investigated using the WIEN2k code in the framework of density functional theory (DFT). The cubic phase of RbTaO3 transforms to tetragonal for RbTaO2S and RbTaOS2, the later transforms again to a cubic phase with added sulfur for RbTaS3. The res…
▽ More
In this study, the effects of sulfur substitution on the structural, mechanical, electronic, optical, and thermodynamic properties of RbTaO3-xSx have been investigated using the WIEN2k code in the framework of density functional theory (DFT). The cubic phase of RbTaO3 transforms to tetragonal for RbTaO2S and RbTaOS2, the later transforms again to a cubic phase with added sulfur for RbTaS3. The results showed that substituting S for O anions in RbTaO3 effectively decreased the band gap from 2.717 eV to 1.438 eV, 0.286 eV, and 0.103 eV for the RbTaO3,RbTaO2S, RbTaOS2, and RbTaS3 compounds, respectively. The optical constants such as dielectric constants, refractive index, absorption coefficient, photoconductivity, reflectivity and loss function have been calculated and analyzed. The elastic constants and moduli, and their anisotropic nature were also investigated. Finally, the Debye temperature, thermal conductivity, melting temperature, specific capacities and thermal expansion coefficients were computed and analyzed using established formalisms. The reduced band gap (1.438 eV) and high absorption coefficient (~106 cm-1) of RbTaO2S makes it suitable for solar cell applications and for other visible light devices. Reduction of the band gap and phonon thermal conductivity owing to Ssubstitution is expected to enhance thermoelectric performances of the S-containing phases
△ Less
Submitted 2 October, 2023;
originally announced October 2023.
-
DFT aided prediction of phase stability, optoelectronic and thermoelectric properties of A2AuScX6 (A= Cs, Rb; X= Cl, Br, I) double perovskites for energy harvesting technology
Authors:
S. Mahmud,
M. A. Ali,
M. M. Hossain,
M. M. Uddin
Abstract:
In this work, density functional theory (DFT) is used to find out the ground state structures of A2AuScX6 (A= Cs, Rb; X= Cl, Br, I) double Perovskite (DP) halides for the first time. The DP A2AuScX6 halides were studied for their structural phase stability and optoelectronic properties in order to identify potential materials for energy harvesting systems. The stability criteria were verified by c…
▽ More
In this work, density functional theory (DFT) is used to find out the ground state structures of A2AuScX6 (A= Cs, Rb; X= Cl, Br, I) double Perovskite (DP) halides for the first time. The DP A2AuScX6 halides were studied for their structural phase stability and optoelectronic properties in order to identify potential materials for energy harvesting systems. The stability criteria were verified by computing the formation energy, binding energy, phonon dispersion curve, stiffness constants, tolerance, and octahedral factors. The electronic band structure, carrier effective mass, density of states (DOS), and charge density distribution were calculated to reveal the nature of electronic conductivity and the chemical bonding nature present within them. For Cs2AuScX6 (Rb2AuScX6) [X = Cl, Br, I], the corresponding values of band gap [using TB-mBJ] are 1.88 (1.93), 1.68 (1.71), and 1.30 (1.32) eV. The optical constants (dielectric function, absorption coefficient, refractive index, energy loss function, photoconductivity, and reflectivity) were also calculated to get more insights into their electronic nature. For Cs2AuScX6 (Rb2AuScX6) [X = Cl, Br, I], the absorption coefficient in the visible range are 3.33 (3.45) 105 cm-1, 2.70 (2.81) 105 cm-1, and 2.13 (2.18) 105 cm-1, respectively. We also investigated the thermoelectric properties to predict promising applications in thermoelectric devices. Our calculations revealed high ZT values of 0.92, 1.07, and 1.06 for Cs2AuScX6 (X = Cl, Br, I) and 0.97, 0.99, and 1.01 for Rb2AuScX6 (X = Cl, Br, I) at 300 K. To further aid in predicting any novel materials, routine research was also done on the thermo-mechanical characteristics. The results suggest the compounds considered as potential candidates for use in solar cells and/or thermoelectric devices.
△ Less
Submitted 1 October, 2023;
originally announced October 2023.
-
Ab-initio insights into the physical properties of XIr3 (X = La, Th) superconductors: A comparative analysis
Authors:
Md. Sajidul Islam,
Razu Ahmed,
M. M. Hossain,
M. A. Ali,
M. M. Uddin,
S. H. Naqib
Abstract:
Here we report the structural, elastic, bonding, thermo-mechanical, optoelectronic and superconducting state properties of recently discovered XIr3 (X = La, Th) superconductors utilizing the density functional theory (DFT). The elastic, bonding, thermal and optical properties of these compounds are investigated for the first time. The calculated lattice and superconducting state parameters are in…
▽ More
Here we report the structural, elastic, bonding, thermo-mechanical, optoelectronic and superconducting state properties of recently discovered XIr3 (X = La, Th) superconductors utilizing the density functional theory (DFT). The elastic, bonding, thermal and optical properties of these compounds are investigated for the first time. The calculated lattice and superconducting state parameters are in reasonable agreement to those found in the literature. In the ground state, both the compounds are mechanically stable and possess highly ductile character, high machinability, low Debye temperature, low bond hardness and significantly high melting point. The thermal conductivities of the compounds are found to be very low which suggests that they can be used for thermal insulation purpose. The population analysis and charge density distribution map confirm the presence of both ionic and covalent bonds in the compounds with ionic bond playing dominant roles. The calculated band structure and DOS profiles indicate metallic character. Unlike the significant anisotropy observed in elastic and thermal properties, all the optical constants of these compounds exhibit almost isotropic behavior. The optical constants correspond very well with the electronic band structure and DOS features. We have estimated the superconducting transition temperature of the compounds in this work.
△ Less
Submitted 27 September, 2023;
originally announced September 2023.
-
Comprehensive first-principles insights into the physical properties of intermetallic Zr$_3$Ir: a noncentrosymmetric superconductor
Authors:
Razu Ahmed,
Md. Sajidul Islam,
M. M. Hossain,
M. A. Ali,
M. M. Uddin,
S. H. Naqib
Abstract:
We have looked into the structural, mechanical, optoelectronic, superconducting state and thermophysical aspects of intermetallic compound Zr$_3$Ir using the density functional theory (DFT). Many of the physical properties, including direction dependent mechanical properties, Vickers hardness, optical properties, chemical bonding nature, and charge density distributions, are being investigated for…
▽ More
We have looked into the structural, mechanical, optoelectronic, superconducting state and thermophysical aspects of intermetallic compound Zr$_3$Ir using the density functional theory (DFT). Many of the physical properties, including direction dependent mechanical properties, Vickers hardness, optical properties, chemical bonding nature, and charge density distributions, are being investigated for the first time. According to this study, Zr$_3$Ir exhibits ductile features, high machinability, significant metallic bonding, a low Vickers hardness with low Debye temperature, and a modest level of elastic anisotropy. The mechanical and dynamical stabilities of Zr$_3$Ir have been confirmed. The metallic nature of Zr$_3$Ir is seen in the electronic band structures with a high electronic energy density of states at the Fermi level. The bonding nature has been explored by the charge density mapping and bond population analysis. The tetragonal Zr$_3$Ir shows a remarkable electronic stability, as confirmed by the presence of a pseudogap in the electronic energy density of states at the Fermi level between the bonding and antibonding states. Optical parameters show very good agreement with the electronic properties. The reflectivity spectra reveal that Zr$_3$Ir is a good reflector in the infrared and near-visible regions. Zr$_3$Ir is an excellent ultra-violet (UV) radiation absorber. High refractive index at visible photon energies indicates that Zr$_3$Ir could be used to improve the visual aspects of electronic displays. All the optical constants exhibit a moderate degree of anisotropy. Zr$_3$Ir has a moderate melting point, high damage tolerance, and very low minimum thermal conductivity. The thermomechanical characteristics of Zr$_3$Ir reveal that it is a potential thermal barrier coating material. The superconducting state parameters of Zr$_3$Ir are also explored.
△ Less
Submitted 11 July, 2023;
originally announced July 2023.
-
DFT insights into MAX phase borides Hf2AB [A = S, Se, Te] in comparison with MAX phase carbides Hf2AC [A = S, Se, Te]
Authors:
J. Islam,
M. D. Islam,
M. A. Ali,
H. Akter,
A. Hossain,
M. Biswas,
M. M. Hossain,
M. M. Uddin,
S. H. Naqib
Abstract:
In this work, density functional theory (DFT) based calculations were performed to compute the physical properties (structural stability, mechanical behavior, electronic, thermodynamic, and optical properties) of synthesized MAX phases Hf2SB, Hf2SC, Hf2SeB, Hf2SeC, Hf2TeB, and the as-yet-undiscovered MAX carbide phase Hf2TeC. Calculations of formation energy, phonon dispersion curves, and elastic…
▽ More
In this work, density functional theory (DFT) based calculations were performed to compute the physical properties (structural stability, mechanical behavior, electronic, thermodynamic, and optical properties) of synthesized MAX phases Hf2SB, Hf2SC, Hf2SeB, Hf2SeC, Hf2TeB, and the as-yet-undiscovered MAX carbide phase Hf2TeC. Calculations of formation energy, phonon dispersion curves, and elastic constants confirmed the stability of the aforementioned compounds. The obtained values of lattice parameters, elastic constants, and elastic moduli of Hf2SB, Hf2SC, Hf2SeB, Hf2SeC, and Hf2TeB showed fair agreement with earlier studies, whereas the values of the mentioned parameters for the predicted Hf2TeC exhibit a good consequence of B replacement by C. The anisotropic mechanical properties are exhibited by the considered MAX phases. The metallic nature and its anisotropic behavior were revealed by the electronic band structure and density of states. The analysis of the thermal properties Debye temperature, melting temperature, minimum thermal conductivity, and Gruneisen parameter confirmed that the carbide phases were more suited than the boride phases considered herein. The MAX phase response to incoming photons further demonstrated that they were metallic. Their suitability for use as coating materials to prevent solar heating was demonstrated by the reflectivity spectra. Additionally, this study demonstrated the impact of B replacing C in the MAX phases.
△ Less
Submitted 21 June, 2023;
originally announced June 2023.
-
Study the effect of scratching depth and ceramic-metal ratio on the scratch behavior of NbC/Nb Ceramic/Metal nano-laminates using molecular dynamics simulation and machine learning
Authors:
Md Mesbah Uddin
Abstract:
Developing a new class of coating materials is necessary to meet the increasing demands of energy and defense-related technologies, aerospace engineering, and harsh environmental conditions. Functional-based coatings, such as ceramic-metal nanolaminates, have gained popularity due to their ability to be customized according to specific requirements. To design and develop advanced coatings with the…
▽ More
Developing a new class of coating materials is necessary to meet the increasing demands of energy and defense-related technologies, aerospace engineering, and harsh environmental conditions. Functional-based coatings, such as ceramic-metal nanolaminates, have gained popularity due to their ability to be customized according to specific requirements. To design and develop advanced coatings with the necessary functionalities, it is crucial to understand the effects of various parameters on the mechanical and tribological properties of these coatings. In this study, we investigate the impact of penetration depth, individual layer thickness, and ceramic-metal ratio on the mechanical and tribological properties of ceramic-metal nanolaminates, particularly NbC/Nb. Our findings reveal that the thickness of the individual metallic and ceramic layers significantly affects the coatings' properties. However, some models exhibited punctures on the top ceramic layer, which altered the scratching behavior and reduced the impact of layer thickness on it. This is because the top ceramic layer's thickness is too low, and the indenter can easily puncture it instead of pushing the ceramic atoms. The minimum thickness required to resist indentation is called the critical thickness, which depends on the indentation size and penetration depth. In the latter part of this paper, we employed machine learning to reduce computational costs, and the model predicts the friction coefficient with an R-squared value of 0.958.
△ Less
Submitted 10 May, 2023; v1 submitted 5 May, 2023;
originally announced May 2023.
-
A comprehensive ab-initio insights into the pressure dependent mechanical, phonon, bonding, electronic, optical, and thermal properties of CsV3Sb5 Kagome compound
Authors:
M. I. Naher,
M. A. Ali,
M. M. Hossain,
M. M. Uddin,
S. H. Naqib
Abstract:
In this paper, we have presented a comprehensive study of the physical properties of Kagome superconductor CsV3Sb5 using the density functional theory (DFT). The structural, mechanical, electronic, atomic bonding, hardness, thermodynamic, and optical properties, and their pressure dependences have been investigated for the first time. The calculated ground state lattice parameters and volume are i…
▽ More
In this paper, we have presented a comprehensive study of the physical properties of Kagome superconductor CsV3Sb5 using the density functional theory (DFT). The structural, mechanical, electronic, atomic bonding, hardness, thermodynamic, and optical properties, and their pressure dependences have been investigated for the first time. The calculated ground state lattice parameters and volume are in excellent agreement with available experimental results. The estimated single-crystal elastic constants ensured the mechanical stability of the compound, whereas phonon spectra endorse dynamical stability at zero pressure. The electronic band structure, energy density of states, optical properties confirmed the metallic features. The Pugh ratio, Poisson's ratio of the compound revealed softness and ductility. The hardness, estimated from several formulae, is quite low while the machinability index predicted good machinability with excellent dry lubricating properties. The compound shows tendency towards structural instability at a pressure around 18 GPa. The optical constants have also been studied to correlate those with electronic properties and to predict possible applications of this compound. Both mechanical and optical properties show anisotropy.CsV3Sb5 is predicted to be an efficient absorber of ultraviolet radiation. The compound is also an efficient reflector of visible light.
△ Less
Submitted 15 April, 2023;
originally announced April 2023.
-
Enhancement of photocatalytic performance of V2O5 by rare-earth ions doping, synthesized by facile hydrothermal technique
Authors:
M. H. Kabir,
M. Z. Hossain,
M. A. Jalil,
M. M. Hossain,
M. A. Ali,
M. U. Khandaker,
D. Jana,
Md. M. Rahman,
M. K. Hossain,
M. M. Uddin
Abstract:
The rare-earth (RE) elements [Holmium (Ho) and Ytterbium (Yb)] doped vanadium pentoxide (V2O5) with a series of doping concentrations (1 mol.%, 3 mol.%, and 5 mol.%) have been successfully synthesized using environment-friendly facile hydrothermal method. The effect of RE ions on the photocatalytic efficiency of doped V2O5 has also been analyzed. The stable orthorhombic crystal structure of doped…
▽ More
The rare-earth (RE) elements [Holmium (Ho) and Ytterbium (Yb)] doped vanadium pentoxide (V2O5) with a series of doping concentrations (1 mol.%, 3 mol.%, and 5 mol.%) have been successfully synthesized using environment-friendly facile hydrothermal method. The effect of RE ions on the photocatalytic efficiency of doped V2O5 has also been analyzed. The stable orthorhombic crystal structure of doped V2O5 confirms by the X-ray diffraction with no secondary phase, and high-stressed conditions are generated for the 3 mol.%. The crystallite size, strain, and dislocation density are calculated to perceive the doping effect on the bare V2O5. The optical characteristics have been measured using UV-vis spectroscopy. The absorptions are found to be increased with increasing doping concentrations; however, the bandgap remains in the visible range. The photocatalytic properties are examined for the compounds with varying pH, and it is observed that higher efficiency is exhibited for the pH 7 and catalyst concentration 500 ppm. The highest degradation efficiency is found to be 93% and 95% for the 3 mol.% of Ho and Yb-doped V2O5 samples within 2 hours, respectively. It is elucidated that the RE ions significantly impact the catalytic behavior of V2O5, and the mechanism behind these extraordinary efficiencies has been explained thoroughly.
△ Less
Submitted 16 January, 2023;
originally announced January 2023.
-
High pressure mediated physical properties of Hf2AB (A = Pb, Bi) via DFT calculations
Authors:
M. S. Hossain,
N. Jahan,
M. M. Hossain,
M. M. Uddin,
M. A. Ali
Abstract:
Using density functional theory (DFT), the structural, mechanical, electronic, thermal, and optical properties of Hf2AB (A = Pb, Bi) borides were studied, considering the pressure effect up to 50 GPa. The lattice constants were found to be decreased with increasing pressure wherein the lattice constants at 0 GPa agree well with the reported values. The stability (mechanical and dynamical) of the t…
▽ More
Using density functional theory (DFT), the structural, mechanical, electronic, thermal, and optical properties of Hf2AB (A = Pb, Bi) borides were studied, considering the pressure effect up to 50 GPa. The lattice constants were found to be decreased with increasing pressure wherein the lattice constants at 0 GPa agree well with the reported values. The stability (mechanical and dynamical) of the titled compounds at different pressures was checked. The mechanical behavior was disclosed considering the bulk modulus, shear modulus, Youngs modulus, Pugh ratio, Poissons ratio, and hardness parameter at different pressures. Pugh and Poisson ratios were used to assess the brittleness and ductility of the titled borides. The anisotropic nature of mechanical properties was studied by calculating different indices and plotting 2D and 3D projections of the elastic moduli. The electronic properties were revealed by calculating the band structure, density of states, and charge density mapping at different pressures, wherein the anisotropic nature of the electronic conductivity was noted. We studied the Debye temperature, minimum thermal conductivity, Gruneisen parameter, and melting temperature of the titled borides at different pressures; the results revealed the improvement of the mentioned properties with rising pressure. The important optical constants to disclose the possible relevance in application purposes were investigated; a little pressure effect was noted. The thermal properties suggest that the titled borides could be used as thermal barrier coating (TBC) materials while the reflectivity spectra revealed their suitability to be used as cover materials for protection from solar heating.
△ Less
Submitted 18 December, 2022;
originally announced December 2022.
-
The rise of 212 MAX phase borides, Ti$_2$PB$_2$, Zr$_2$PbB$_2$, and Nb$_2$AB$_2$ [A = P, S]: DFT insights into the physical properties for thermo-mechanical applications
Authors:
M. A. Ali,
M. M. Hossain,
M. M. Uddin,
A. K. M. A. Islam,
S. H. Naqib
Abstract:
An interesting class of ternary metallic borides, known as the 212 MAX phase borides, is the recent advancement of the MAX phase family. In this article, results from ab-initio calculations on unexplored Ti$_2$PB$_2$, Zr$_2$PbB$_2$, and Nb$_2$AB$_2$ [A = P, S] are reported wherein Ti$_2$PB$_2$ along with its 211 boride phase Ti$_2$PB are predicted for the first time. The stability was confirmed by…
▽ More
An interesting class of ternary metallic borides, known as the 212 MAX phase borides, is the recent advancement of the MAX phase family. In this article, results from ab-initio calculations on unexplored Ti$_2$PB$_2$, Zr$_2$PbB$_2$, and Nb$_2$AB$_2$ [A = P, S] are reported wherein Ti$_2$PB$_2$ along with its 211 boride phase Ti$_2$PB are predicted for the first time. The stability was confirmed by calculating the formation energy, phonon dispersion curve, and elastic stiffness constants. The obtained elastic constants, elastic moduli, and Vickers hardness values of Ti$_2$PB$_2$, Zr$_2$PbB$_2$, and Nb$_2$AB$_2$ [A = P, S] were found to be significantly larger than those of their counterparts 211 borides and carbides, in a trend similar to other 212 borides. The studied compounds are brittle like most of the MAX and MAB phases. The electronic band structure and density of states revealed the metallic nature of the titled borides. Several thermal parameters were explored, certifying the suitability of Ti2PB2, Zr2PbB2, and Nb2AB2 [A = P, S] compared to their counterparts, and a similar trend was found for the other 212 borides. The obtained results predict that Ti2PB2, Zr2PbB2, and Nb2AB2 [A = P, S] have significant potential for use as efficient thermal barrier coating materials. The response of Ti$_2$PB$_2$, Zr$_2$PbB$_2$, and Nb$_2$AB$_2$ [A = P, S] to the incident photon was studied by computing the dielectric constant (real and imaginary part), refractive index, absorption coefficient, photoconductivity, reflectivity, and energy loss function. The ability to protect from solar heating was revealed from the studied reflectivity spectra. In this work, we have explored the physical basis of the improved thermo-mechanical properties of 212 MAX phase borides compared to their carbide and boride counterparts.
△ Less
Submitted 2 September, 2022; v1 submitted 17 July, 2022;
originally announced July 2022.
-
Impact of reaction temperatures on the particle size of V2O5 synthesized by facile hydrothermal technique and their auspicious photocatalytic performance in dye degradation
Authors:
M. A. Jalil,
M. N. I. Khan,
S. Mandal,
F. -U. -Z. Chowdhury,
M. M. Hossain,
D. Jana,
M. S. Alam,
M. M. Uddin
Abstract:
In this study, a complete study of the effect of hydrothermal reaction temperatures on the synthesis and physical properties of V2O5 using the green facile mild hydrothermal method has been performed with six different temperatures 100 °C to 200 °C, in the step of 20 °C. . The XRD pattern confirm the stable orthorhombic crystal structure of the synthesized samples at all reaction temperatures. The…
▽ More
In this study, a complete study of the effect of hydrothermal reaction temperatures on the synthesis and physical properties of V2O5 using the green facile mild hydrothermal method has been performed with six different temperatures 100 °C to 200 °C, in the step of 20 °C. . The XRD pattern confirm the stable orthorhombic crystal structure of the synthesized samples at all reaction temperatures. The SEM and TEM images demonstrate the particle-like morphology, and these characterizations affirmed that the particles size became larger with the increase of reaction temperatures. The FTIR analysis is employed to study the functional groups, and the obtained results are consistent with the XRD analysis. The bandgap has been estimated at various reaction temperatures using UV-vis diffuse reflectance spectra (UV-DRS) and was found to be varied 2.09 eV to 2.15 eV that are suitable range to absorb a significant amount of visible light. The photocatalysis of methylene blue (MB) with synthesized samples has been accomplished to investigate photocatalytic efficiency. The pure V2O5 synthesized at lower reaction temperature (100 °C) possess a lower bandgap and, accordingly, higher photocatalytic efficiency.
△ Less
Submitted 9 May, 2022;
originally announced May 2022.
-
Newly synthesized 3D boron-rich chalcogenides B12X (X = S, Se): Theoretical characterization of physical properties for optoelectronic and mechanical applications
Authors:
M. M. Hossain,
M. A. Ali,
M. M. Uddin,
S. H. Naqib,
A. K. M. A. Islam
Abstract:
Boron rich chalcogenides have been predicted to have excellent properties for optical and mechanical applications in recent times. In this regard, we report the electronic, optical and mechanical properties of recently synthesized boron rich chalcogenide compounds, B12X (X = S and Se) using density functional theory for the first time. The effects of exchange and correlation functional on these pr…
▽ More
Boron rich chalcogenides have been predicted to have excellent properties for optical and mechanical applications in recent times. In this regard, we report the electronic, optical and mechanical properties of recently synthesized boron rich chalcogenide compounds, B12X (X = S and Se) using density functional theory for the first time. The effects of exchange and correlation functional on these properties are also investigated. The consistency of the obtained crystal structure with the reported experimental results has been checked in terms of lattice parameters. The considered materials are mechanically stable, brittle and elastically anisotropic. Furthermore, the elastic moduli and hardness parameters are calculated, which show that B12S is likely to be a prominent member of hard materials family compared to B12Se. The origin of different in hardness is explained on the basis of density of states near the Fermi level. Reasonably good values of fracture toughness and machinability index for B12X (X= S and Se) are reported. The melting point, Tm for the B12S and B12Se compounds suggests that both solids are stable, at least up to 4208 and 3577 K, respectively. Indirect band gap of B12S (2.27 eV) and B12Se (1.30 eV) are obtained using the HSE06 functional.The electrons of B12Se compound show lighter average effective mass compared to that of B12S compound, which signifies higher mobility of charge carriers in B12Se. The optical properties are characterized using GGA-PBE and HSE06 method and discussed in detail. These compounds possess bulk optical anisotropy and excellent absorption coefficients in visible light region along with very low static value of reflectivity spectra (range: 7.42-14.0% using both functionals) are noted. Such useful features of the compounds under investigation show promise for applications in optoelectronic and mechanical sectors.
△ Less
Submitted 19 August, 2021;
originally announced August 2021.
-
Impact of particle size on the magnetic properties of highly crystalline Yb3+ substituted Ni-Zn nanoferrites
Authors:
N. Jahan,
M. M. Uddin,
M. N. I. Khan,
F. -U. -Z. Chowdhury,
M. R. Hasan,
H. N. Das,
M. M. Hossain
Abstract:
Yb-substituted Ni-Zn ferrites have been synthesized using sol-gel auto combustion method. The structural characterization of the compositions has been performed by X-ray diffraction analysis, field emission scanning electron microscopy (FESEM), quantum design physical properties measurement system (PPMS). That ensured the formation of single phase cubic spinel structure. Crystallite and average gr…
▽ More
Yb-substituted Ni-Zn ferrites have been synthesized using sol-gel auto combustion method. The structural characterization of the compositions has been performed by X-ray diffraction analysis, field emission scanning electron microscopy (FESEM), quantum design physical properties measurement system (PPMS). That ensured the formation of single phase cubic spinel structure. Crystallite and average grain size are calculated and found to decrease with increasing Yb3+ contents. Saturation magnetization and Bohr magnetic moment decrease while the coercivity increases with the increase in Yb3+ contents successfully explained by the Neels collinear two sub-lattice model and critical size effect, respectively. Critical particle size has been estimated at 6.4 nm, the transition point between single domain regime (below the critical size) and multi-domain regime (beyond the critical size). Curie temperature reduces due to the weakening of A-O-B super exchange interaction and redistribution of cations, confirmed by the M-T graph. The compositions retain ferromagnetic ordered structured below Curie temperature and above Curie temperature, it becomes paramagnetic, making them plausible candidates for high temperature magnetic device applications. The relative quality factor peak is obtained at a very high frequency, indicating the compositions could also be applicable for high frequency magnetic device applications.
△ Less
Submitted 17 April, 2021;
originally announced April 2021.
-
Enhanced thermo-mechanical properties of 212 MAX phase borides Zr2AB2 (A = In, Tl): an ab-initio understanding
Authors:
M. A. Ali,
M. M. Hossain,
M. M. Uddin,
A. K. M. A. Islam,
S. H. Naqib
Abstract:
The discovery of MAX phase borides has added a new dimension for research in the materials science community. In this paper, a first-principles study of the newly known MAX phase borides Zr2AB2 (A = In, Tl) has been carried out. The estimated lattice constants and volumes of the unit cell are found to be consistent with previous study. The dynamical and mechanical stability of the titled compounds…
▽ More
The discovery of MAX phase borides has added a new dimension for research in the materials science community. In this paper, a first-principles study of the newly known MAX phase borides Zr2AB2 (A = In, Tl) has been carried out. The estimated lattice constants and volumes of the unit cell are found to be consistent with previous study. The dynamical and mechanical stability of the titled compounds have been checked. Fundamental insights into the stiffness constants, elastic moduli, hardness parameters, brittleness and anisotropy indices are presented. The Variation of these mechanical properties was explained based on the Mulliken population analysis and charge density mapping (CDM). The electronic properties have been dealt with by considering electronic band structure and density of states (DOS) which confirmed the metallic nature of Zr2AB2 (A = In, Tl). The lowly dispersive energy bands along the c-direction confirmed anisotropy in conductivity. The analysis of DOS revealed the dominant contribution from Zr-d orbitals to the conductivity with a small contribution from the In/Tl-p states contributing at the Fermi level. The Debye temperature (Theta-D), minimum thermal conductivity (Kmin), Gruneisen parameter and melting temperature (Tm) have been calculated. The higher values of Theta-D and Tm, and lower value of Kmin for Zr2AB2 (A = In, Tl) compared to those of Zr2AC (A = In, Tl). Besides, the specific heat capacities, thermal expansion coefficient, and different thermodynamic potential functions have been calculated. The optical constants have been studied to reveal their possible relevance for application purposes. The reflectivity spectra revealed the applicability of Zr2AB2 (A = In, Tl) as cover materials to diminish the solar heating. The studied physical properties of Zr2AB2 (A = In, Tl) are compared with those of other relevant 212 and 211 MAX phase nanolaminates.
△ Less
Submitted 21 March, 2021;
originally announced March 2021.
-
Origin of high hardness and optoelectronic and thermo-physical properties of boron-rich compounds B6X (X = S, Se): a comprehensive study via DFT approach
Authors:
M. M. Hossain,
M. A. Ali,
M. M. Uddin,
A. K. M. A. Islam,
S. H. Naqib
Abstract:
In the present study, the structural and hitherto uninvestigated mechanical (elastic stiffness constants, machinability index, Cauchy pressure, anisotropy indices, brittleness/ductility, Poissons ratio), electronic, optical, and thermodynamic properties of novel boron-rich compounds B6X (X = S, Se) have been explored using density functional theory. The estimated structural lattice parameters were…
▽ More
In the present study, the structural and hitherto uninvestigated mechanical (elastic stiffness constants, machinability index, Cauchy pressure, anisotropy indices, brittleness/ductility, Poissons ratio), electronic, optical, and thermodynamic properties of novel boron-rich compounds B6X (X = S, Se) have been explored using density functional theory. The estimated structural lattice parameters were consistent with the prior report. The mechanical and dynamical stability of these compounds have been established theoretically. The materials are brittle in nature and elastically anisotropic. The value of fracture toughness, KIC for the B6S and B6Se are ~ 2.07 MPam0.5, evaluating the resistance to limit the crack propagation inside the materials. Both B6S and B6Se compounds possess high hardness values in the range 31-35 GPa, and have the potential to be prominent members of the class of hard compounds. Strong covalent bonding and sharp peak at low energy below the Fermi level confirmed by partial density of states (PDOS) resulted in the high hardness. The profile of band structure, as well as DOS, assesses the indirect semiconducting nature of the titled compounds. The comparatively high value of Debye temperature (ΘD), minimum thermal conductivity (Kmin), lattice thermal conductivity (kph), low thermal expansion coefficient, and low density suggest that both boron-rich chalcogenides might be used as thermal management materials. Large absorption capacities in the mid ultraviolet region (3.2-15 eV) of the studied materials and low reflectivity (~16 %) are significantly noted. Such favorable features give promise to the compounds under investigation to be used in UV surface-disinfection devices as well as medical sterilizer equipment applications. Excellent correlations are found among all the studied physical properties of these compounds.
△ Less
Submitted 31 January, 2021;
originally announced February 2021.
-
Physical properties of predicted MAX phase borides Hf2AB (A = Pb, Bi): a DFT insight
Authors:
M. S. Hossain,
M. A. Ali,
M. M. Hossain,
M. M. Uddin
Abstract:
We have used density functional theory to study the recently predicted MAX phase borides Hf2AB (A = Pb, Bi) in where the mechanical, electronic, thermal, and optical properties have been investigated for the first time. A good agreement of the obtained lattice constants with the reported values confirmed the well accuracy of the present calculations. The stiffness constants (Cij) attest to the mec…
▽ More
We have used density functional theory to study the recently predicted MAX phase borides Hf2AB (A = Pb, Bi) in where the mechanical, electronic, thermal, and optical properties have been investigated for the first time. A good agreement of the obtained lattice constants with the reported values confirmed the well accuracy of the present calculations. The stiffness constants (Cij) attest to the mechanical stability of all title compounds. The mechanical behaviors have been scrutinized discreetly by considering the bulk modulus, shear modulus, Youngs modulus, as well as hardness parameters. The brittle nature of Hf2AB (A = Pb, Bi) borides has also been confirmed. The electronic band structure and density of states (DOS) revealed the metallic behavior of the titled materials. The anisotropy in electrical conductivity has been disclosed by considering the energy dispersion along different directions. The variation of Vickers hardness is explained in terms of the total DOS of Hf2AB (A = Pb, Bi). The anisotropic nature of the mechanical properties of the phases has also been studied. The technologically important parameters (Debye temperature, minimum thermal conductivity, and Grüneisen parameter) have also been used to evaluate the thermal behaviors of the titled materials. The possibility of Hf2AB (A = Pb, Bi) for use as coating materials has been assessed by studying the reflectivity.
△ Less
Submitted 14 January, 2021;
originally announced January 2021.
-
DFT insights into new B-containing 212 MAX phases: Hf2AB2 (A = In, Sn)
Authors:
M. A. Ali,
M. M. Hossain,
M. M. Uddin,
A. K. M. A. Islam,
D. Jana,
S. H. Naqib
Abstract:
212 MAX phase borides are new additions to the MAX phase family with enhanced thermo-mechanical properties. In this article, first-principles calculations have been carried out to explore the mechanical properties, Vickers hardness, elastic anisotropy, thermal properties, and optical properties of predicted thermodynamically stable MAX compounds Hf2AB2 (A = In, Sn). The structural properties are c…
▽ More
212 MAX phase borides are new additions to the MAX phase family with enhanced thermo-mechanical properties. In this article, first-principles calculations have been carried out to explore the mechanical properties, Vickers hardness, elastic anisotropy, thermal properties, and optical properties of predicted thermodynamically stable MAX compounds Hf2AB2 (A = In, Sn). The structural properties are compared with the available data to assess the validity of calculations. The mechanical stability of Hf2AB2 (A = In, Sn) compounds is established with the help of the computed stiffness constants (Cij). The possible reason for enhanced mechanical properties and Vickers hardness of Hf2SnB2 is explained based on the analysis of bonding strength, followed by the electronic density of states. Higher mechanical strength and Vickers hardness of Hf2AB2 (A = In, Sn) compared to Hf2AC (A = In, Sn) are also indicated in the light of charge density mapping. The values of Pugh ratio, Poissons ratio and Cauchy pressure predict brittle character of the studied compounds. Besides, the anisotropic nature of the titled borides is investigated by 2D and 3D plots of elastic moduli along with some well established anisotropy indices. Thermal properties were investigated by calculating the Debye temperature, minimum thermal conductivity, Grüneisen parameter, and melting temperature. The thermal properties of Hf2AB2 (A = In, Sn) are also superior to Hf2AC (A = In, Sn). The optical constants such as real and imaginary parts of the dielectric function, refractive index, extinction coefficient, absorption coefficient, photoconductivity, reflectivity, and loss function are investigated.
△ Less
Submitted 9 October, 2020;
originally announced October 2020.
-
NaInX2 (X = S, Se) layered materials for energy harvesting applications: First-principles insights into optoelectronic and thermoelectric properties
Authors:
M. M. Hossain,
M. A. Hossain,
S. A. Moon,
M. A. Ali,
M. M. Uddin,
S. H. Naqib,
A. K. M. A. Islam M. Nagao S. Watauchi,
I. Tanaka
Abstract:
In the present study, the structural, electronic, optical and thermoelectric properties of two isostructural chalcogenide materials, NaInS2 and NaInSe2 with hexagonal symmetry (R-3m) have been studied using the first principles method. A very good agreement has been found between our results with the available experimental and theoretical ones. The studied materials are semiconducting in nature as…
▽ More
In the present study, the structural, electronic, optical and thermoelectric properties of two isostructural chalcogenide materials, NaInS2 and NaInSe2 with hexagonal symmetry (R-3m) have been studied using the first principles method. A very good agreement has been found between our results with the available experimental and theoretical ones. The studied materials are semiconducting in nature as confirmed from the electronic band structure and optical properties.The strong hybridizations among s orbitals of Na, In and Se atoms push the bottom of the conduction band downward resulting in a narrower band gap of NaInSe2 compared to that of NaInS2 compound. Different optical (dielectric function, photoconductivity, absorption coefficient, reflectivity, refractive index and loss function) and thermoelectric (Seebeck coefficient, electrical conductivity, power factor and thermal conductivity) properties of NaInX2 (X = S, Se) have been studied in detail for the first time. It is found that all these properties are significantly anisotropic due to the strongly layered structure of NaInX2 (X = S, Se). Strong optical absorption with sharp peaks is found in the far visible to mid ultraviolet (UV) regions while the reflectivity is low in the UV region for both the compounds. Such features indicate feasibility of applications in optoelectronic sector.The calculated thermoelectric power factors at 1000 K for NaInS2 and NaInSe2 along a-axis are found to be 151.5 micro Watt /cmK2 and 154 micro Watt/cmK2, respectively and the corresponding ZT values are ~0.70. The obtained thermal conductivity along a-axis for both compounds is high (~22 W/mK).This suggests that the reduction of such high thermal conductivity is important to achieve higher ZT values of the NaInX2(X = S, Se) compounds.
△ Less
Submitted 5 October, 2020;
originally announced October 2020.
-
Influence of Se doping in recently synthesized NaInS2-xSex solid solutions for potential thermo-mechanical applications studied via first-principles method
Authors:
M. M. Hossain,
M. A. Ali,
M. M. Uddin,
M. A. Hossain,
M. Rasadujjaman,
S. H. Naqib,
M. Nagao,
S. Watauchi,
I. Tanaka
Abstract:
In the present work, the structural and hitherto unexplored thermal and mechanical properties of NaInS2-xSex (x = 0, 0.5, 1.0, 1.5 and 2.0) compounds have been studied using the density functional theory. Besides, the elastic anisotropy indices and hardnesses of NaInS2-xSex have been investigated as Se content is varied. The mechanical stability of all the compounds under study has been confirmed.…
▽ More
In the present work, the structural and hitherto unexplored thermal and mechanical properties of NaInS2-xSex (x = 0, 0.5, 1.0, 1.5 and 2.0) compounds have been studied using the density functional theory. Besides, the elastic anisotropy indices and hardnesses of NaInS2-xSex have been investigated as Se content is varied. The mechanical stability of all the compounds under study has been confirmed. The ratio of shear to bulk modulus (G/B) is low suggesting that the NaInS2-xSex (x = 0.5 and 1.5) compounds exhibit damage tolerant (ductility) properties while rest of the compositions are brittle in nature. The predicted hardness (H) values are also influenced with the Se content in the following order: H (NaInSSe) > H (NaInS2) > H (NaInSe2) > H (NaInS1.5Se0.5) > H (NaInS0.5Se1.5). All the anisotropic indices under study indicate that NaInS2-xSex compounds are anisotropic in nature. The Mulliken bond population analysis suggests that the degree of covalency of In-S/Se bonds decreases when S is substituted by Se. The origin of low Debye temperature (ΘD) and low minimum thermal conductivity (Kmin) have been successfully explained by considering the mean atomic weight (M/n) and average bond strength of the compounds. Temperature dependence of heat capacities (Cv, Cp) and linear thermal expansion coefficient (α ) are also estimated using the quasi-harmonic Debye model and discussed. The low values of Kmin, ΘD and α and damage tolerant behavior clearly indicate that the NaInS2-xSex (x = 0.5 and 1.5) compounds can be used as promising thermal barrier coating materials for high temperature applications.
△ Less
Submitted 5 October, 2020;
originally announced October 2020.
-
Physical properties of new MAX phase borides M2SB (M = Zr, Hf and Nb) in comparison with conventional MAX phase carbides M2SC (M = Zr, Hf and Nb): Comprehensive insights
Authors:
M. A. Ali,
M. M. Hossain,
M. M. Uddin,
M. A. Hossain,
A. K. M. A. Islam,
S. H. Naqib
Abstract:
In this article, a detailed study of the recently synthesized MAX phase borides M2SB (M = Zr, Hf and Nb) has been performed via first principles technique. Investigation of mechanical hardness, elastic anisotropy, optical properties, dynamical stability and thermal properties are considered for the first time. The estimated values of stiffness constants and elastic moduli are found in good agreeme…
▽ More
In this article, a detailed study of the recently synthesized MAX phase borides M2SB (M = Zr, Hf and Nb) has been performed via first principles technique. Investigation of mechanical hardness, elastic anisotropy, optical properties, dynamical stability and thermal properties are considered for the first time. The estimated values of stiffness constants and elastic moduli are found in good agreement with available results. The micro and macro hardness (Hmicro and Hmacro) parameters are calculated. The Vickers hardness is also calculated using Mulliken population analysis. The electronic density of states and charge density mapping are used to explain the variation of stiffness constants, elastic moduli and hardness parameters among the studied ternary borides. The Nb2SB compound is found to show best combination of mechanical properties. Mixture of covalent and ionic bonding within these borides is explained using Mulliken population analysis. The direction dependent values of Youngs modulus, compressibility, shear modulus and Poissons ratio are visualized by 2D and 3D representations and different anisotropic factors are calculated. The important optical constants are calculated and analyzed. The metallic nature of the studied borides is confirmed from the DOS and optical properties. The reflectivity spectra reveal the potential use of Zr2SB as coating materials to diminish solar heating. The studied borides are dynamically stable as confirmed from the phonon dispersion curves. The characteristic thermodynamic properties have also been calculated and analyzed. The physical properties of corresponding 211 MAX phase carbides are also calculated for comparison with those of the titled ternary borides.
△ Less
Submitted 9 September, 2020;
originally announced September 2020.
-
Dynamical stability, Vibrational and optical properties of anti-perovskite A3BX (Ti3TlN, Ni3SnN and Co3AlC) phases: a first principles study
Authors:
K. Das,
M. A. Ali,
M. M. Hossain,
S. H. Naqib,
A. K. M. A. Islam,
M. M. Uddin
Abstract:
We have investigated various physical properties including phonon dispersion, thermodynamic parameters, optical constants, Fermi surface, Mulliken bond population, theoretical Vickers hardness and damage tolerance of anti-perovskite A3BX phases for the first time by employing density functional theory (DFT) methodology based on first principles method. Initially we assessed nine A3BX phases in tot…
▽ More
We have investigated various physical properties including phonon dispersion, thermodynamic parameters, optical constants, Fermi surface, Mulliken bond population, theoretical Vickers hardness and damage tolerance of anti-perovskite A3BX phases for the first time by employing density functional theory (DFT) methodology based on first principles method. Initially we assessed nine A3BX phases in total and found that only three phases (Ti3TlN, Ni3SnN and Co3AlC) are mechanically and dynamically stable based on analysis of computed elastic constants and phonon dispersion along with phonon density of states. We revisited the structural, elastic and electronic properties of the compounds to judge the reliability of our calculations. Absence of band gap at the Fermi level characterizes the phases under consideration as metallic in nature. The values of Pugh ratio, Poisson ratio and Cauchy factor have predicted the ductile nature associated with strong metallic bonding in these compounds. High temperature feasibility study of the phases has also been performed using the thermodynamic properties, such as the free energy, enthalpy, entropy, heat capacity and Debye temperature. The Vickers hardness of the compounds are estimated to be around 4 GPa which is comparable to many well-known MAX phases, indicating their reasonable hardness and easily machinable nature. The static refractive index n(zero) has been found around 8.0 for the phases under study that appeals as potential candidate to design optoelectronics appliances. The reflectivity is found above 44 percent for the Ti3TlN compound in the energy range of 0 to 14.8 eV demonstrating that this material holds significant promise as a coating agent to avoid solar heating.
△ Less
Submitted 9 July, 2020;
originally announced July 2020.
-
Influence of Yb3+on the structural, electrical and optical properties of sol-gel synthesized Ni-Zn nanoferrites
Authors:
N. Jahan,
M. N. I. Khan,
F. -U. -Z. Chowdhury,
A. K. M. Akhter Hossain,
S. M. Hoque,
M. A. Matin,
M. N. Hossain,
M. M. Hossain,
M. M. Uddin
Abstract:
Polycrystalline Yb substituted NiZn nanoferrites with the compositions of Ni0.5Zn0.5YbxFe2-xO4 (x= 0.00, 0.04, 0.08, 0.12, 0.16 and 0.20) have been synthesized using sol gel auto combustion technique. Single phase cubic spinel structure has been confirmed by the X ray diffraction (XRD) patterns. Larger lattice constants of the compositions are found with increasing Yb3+ concentration while the ave…
▽ More
Polycrystalline Yb substituted NiZn nanoferrites with the compositions of Ni0.5Zn0.5YbxFe2-xO4 (x= 0.00, 0.04, 0.08, 0.12, 0.16 and 0.20) have been synthesized using sol gel auto combustion technique. Single phase cubic spinel structure has been confirmed by the X ray diffraction (XRD) patterns. Larger lattice constants of the compositions are found with increasing Yb3+ concentration while the average grain size (52 to 18 nm) has noticeable decrease as Yb3+ content is increased. The presence of all existing elements as well as the purity of the samples has also been confirmed from energy dispersive X ray spectroscopic (EDS) analysis. Frequency dependent dielectric constant, dielectric loss, dielectric relaxation time, AC and DC resistivity of the compositions have also been examined at room temperature. The DC resistivity value is found in the order of 10 to power 10 (omega-cm) which is at least four orders greater than the ferrites prepared by conventional method. This larger value of resistivity attributes due to very small grain size and successfully explained using the Verwey and deBoer hopping conduction model. The contribution of grain and grain boundary resistance has been elucidated using Cole Cole plot. The study of temperature dependent DC resistivity confirms the semiconducting nature of all titled compositions wherein bandgap (optical) increases from 2.73 eV to 3.25 eV with the increase of Yb content. The high value of resistivity is of notable achievement for the compositions that make them a potential candidate for implication in the high frequency applications where reduction of eddy current loss is highly required.
△ Less
Submitted 25 June, 2020;
originally announced June 2020.
-
Mechanical behavior, enhanced dc resistivity, energy band gap and high temperature magnetic properties of Y-substituted Mg-Zn ferrites
Authors:
M. A. Ali,
M. N. I. Khan,
M. M. Hossain,
F. -U. -Z. Chowdhury,
M. N. Hossain,
R. Rashid,
M. A. Hakim,
S. M. Hoque,
M. M. Uddin
Abstract:
We report the synthesis of Y-substituted Mg-Zn ferrites using conventional standard ceramic technique. XRD patterns confirm the single phase cubic spinel structure up to x = 0.03 and appearance of a secondary phase of YFeO3for higher Y contents. FESEM images depict the distribution of grains and EDS spectra confirmed the absence of any unwanted element. Completion of solid state reaction and forma…
▽ More
We report the synthesis of Y-substituted Mg-Zn ferrites using conventional standard ceramic technique. XRD patterns confirm the single phase cubic spinel structure up to x = 0.03 and appearance of a secondary phase of YFeO3for higher Y contents. FESEM images depict the distribution of grains and EDS spectra confirmed the absence of any unwanted element. Completion of solid state reaction and formation of spinel structure has been revealed from FTIR spectra. The FTIR data along with lattice constant, bulk density and porosity were further used to calculate the stiffness constant (Cij), elastic constant and Debye temperatures. Mechanical stability of all studied compositions is confirmed from Cij using Born stability conditions. Brittleness and isotropic nature are also confirmed using Poisson ratio and anisotropy constants, respectively. The enhancement of dc electrical resistivity with Y content is observed. The energy band gap (increased with Y contents) is found in good agreement with dc electrical resistivity. Ferrimagnetic to paramagnetic phase change has been observed from the field dependent high temperature magnetization curves. The magnetic moments and saturation magnetization were found to be decreased with increasing temperature. The Curie temperature (Tc) has been measured from temperature dependent magnetic moment (M-T) and initial permeability and found to be in good agreement with each other. Decrease in Tc with Y content is due to redistribution of cations and weakening of the exchange coupling constant. The magnetic phase transition has been analyzed by Arrott plot and found to have second order phase transition. The dc resistivity endorses the prepared ferrites are suitable for high frequency and high temperature magnetic device applications as well.
△ Less
Submitted 20 January, 2020;
originally announced January 2020.
-
Pump-probe nuclear spin relaxation study of the quantum Hall ferromagnet at filling factor nu = 2
Authors:
K. F. Yang,
M. M. Uddin,
K. Nagase,
T. D. Mishima,
M. B. Santos,
Y. Hirayama,
Z. N. Yang,
H. W. Liu
Abstract:
The nuclear spin-lattice relaxation time T1 of the nu = 2 quantum Hall ferromagnet (QHF) formed in a gate-controlled InSb two-dimensional electron gas has been characterized using a pump-probe technique. In contrast to a long T1 of quantum Hall states around nu = 1 that possesses a Korringa-type temperature dependence, the temperature-independent short T1 of the nu = 2 QHF suggests the presence of…
▽ More
The nuclear spin-lattice relaxation time T1 of the nu = 2 quantum Hall ferromagnet (QHF) formed in a gate-controlled InSb two-dimensional electron gas has been characterized using a pump-probe technique. In contrast to a long T1 of quantum Hall states around nu = 1 that possesses a Korringa-type temperature dependence, the temperature-independent short T1 of the nu = 2 QHF suggests the presence of low energy collective spin excitations in a domain wall. Furthermore, T1 of this ferromagnetic state is also found to be filling- and current-independent. The interpretation of these results as compared to the T1 properties of other QHFs is discussed in terms of the domain wall skyrmion, which will lead to a better understanding of the QHF.
△ Less
Submitted 18 August, 2019; v1 submitted 18 March, 2019;
originally announced March 2019.
-
Yttrium-substituted Mg-Zn ferrites: correlation of physical properties with Yttrium content
Authors:
M. A. Ali,
M. N. I. Khan,
F. -U. -Z. Chowdhury,
M. M. Hossain,
A. K. M. Akhter Hossain,
R. Rashid,
A. Nahar,
S. M. Hoque,
M. A. Matin,
M. M. Uddin
Abstract:
Yttrium (Y) substituted Mg Zn ferrites with the compositions of Mg0.5Zn0.5YxFe2 xO4 have been synthesized by conventional standard ceramic technique. The effect of Y3+ substitution on the structural, electrical, dielectric and magnetic properties of Mg Zn ferrites has been studied.
Yttrium (Y) substituted Mg Zn ferrites with the compositions of Mg0.5Zn0.5YxFe2 xO4 have been synthesized by conventional standard ceramic technique. The effect of Y3+ substitution on the structural, electrical, dielectric and magnetic properties of Mg Zn ferrites has been studied.
△ Less
Submitted 7 July, 2019; v1 submitted 15 December, 2018;
originally announced December 2018.
-
First principles study of M2InC (M = Zr, Hf and Ta) MAX phases: The effect of M atomic species
Authors:
F. Sultana,
M. M. Uddin,
M. A. Ali,
M. M. Hossain,
S. H. Naqib,
A. K. M. A. Islam
Abstract:
We have studied the physical properties of M2InC (M = Zr, Hf and Ta) MAX phases ternary carbides using density functional theory (DFT) methodology. The structural, elastic and electronic properties are revisited (and found to be in good agreement with recently reported results). The charge density distribution, Fermi surface features, Vickers hardness, dynamical stability, thermodynamics and optic…
▽ More
We have studied the physical properties of M2InC (M = Zr, Hf and Ta) MAX phases ternary carbides using density functional theory (DFT) methodology. The structural, elastic and electronic properties are revisited (and found to be in good agreement with recently reported results). The charge density distribution, Fermi surface features, Vickers hardness, dynamical stability, thermodynamics and optical properties have been investigated for the first time. The calculated single crystal elastic constants and phonon dispersion curves endorse the mechanical and dynamical stability of all the compounds under study. The calculated single crystal elastic constants Cij and polycrystalline elastic constants are found to increase with increasing atomic number of M species (M = Zr, Hf and Ta). The values of Pugh ratio and Poisson ratio revealed the brittleness of the compounds under study associated with strong directional covalent bond with a mixture of ionic contribution. Overlapping of conduction band and valence band at Fermi level notify the metallic nature of M2InC (M = Zr, Hf and Ta) MAX phases. Low values of Vicker hardness indicate the softness of the materials and easy machinability.. The thermodynamic properties, such as the free energy, enthalpy, entropy, specific heat capacity and Debye temperature are evaluated using the phonon dispersion curves and a good correspondence is found with the M atomic species. Electronically important optical properties, e.g., dielectric functions, refractive index, photoconductivity, absorption coefficient, loss function and reflectivity are calculated and discussed in detail in this study.
△ Less
Submitted 22 May, 2018; v1 submitted 20 May, 2018;
originally announced May 2018.
-
Effects of transition metals on physical properties of M2BC (M = V, Nb, Mo and Ta): a DFT calculation
Authors:
P. Barua,
M. M. Hossain,
M. A. Ali,
M. M. Uddin,
S. H. Naqib,
A. K. M. A. Islam
Abstract:
The electronic band structures along with Fermi surface, anisotropy, Vickers hardness, analysis of Mulliken populations, optical and thermodynamic properties were studied for the first time. The optimized unit cell parameters are compared with available theoretical and experimental results and a reasonable agreement is recorded. The mechanical stability of these compounds is confirmed. All the com…
▽ More
The electronic band structures along with Fermi surface, anisotropy, Vickers hardness, analysis of Mulliken populations, optical and thermodynamic properties were studied for the first time. The optimized unit cell parameters are compared with available theoretical and experimental results and a reasonable agreement is recorded. The mechanical stability of these compounds is confirmed. All the compounds herein exhibit metallic conductivity where major contribution comes from d-orbital electrons. The hardness values of 10.71, 12.44, 8.52 and 16.80 GPa were recorded for M2BC (M = V, Nb, Mo and Ta) compounds, respectively. The value of bulk modulus, B is found to increase in the sequence B (V2BC) < B (Nb2BC) < B (Ta2BC) < B (Mo2BC), indicates Mo2BC is highly stiff among all compounds. The Mo2BC and Ta2BC compound might be considered as potential candidates for protection of cutting and forming tools due to the moderately ductile and highly stiff behavior compared to other benchmark hard coating materials such as TiN, TiAlN, Ti0.5Al0.5N and c-BN. Ta2BC compound could also be a promising thermal barrier coating (TBC) material due to the reasonable results of minimum thermal conductivity, Debye temperature and damage tolerance behavior. Various optical functions such as dielectric constants, refractive index, photo-conductivity, absorption, loss function and reflectivity) are calculated and discussed in details. The amount of reflectivity was always more than around 50% with no significant change in the near infrared, visible light and near ultraviolet region (up to ~6 eV), which results a promising coating material to diminish solar heating as well.
△ Less
Submitted 24 May, 2018; v1 submitted 9 May, 2018;
originally announced May 2018.
-
Elastic, electronic, optical and thermoelectric properties of K2Cu2GeS4: a new chalcogenide material
Authors:
M. A. Ali,
M. A. Hossain,
M. A. Rayhan,
M. M. Hossain,
M. M. Uddin,
M. Roknuzzaman,
K. Ostrikov,
A. K. M. A. Islam S. H. Naqib
Abstract:
We report the first principles study of structural, elastic, electronic, optical and thermoelectric properties of newly synthesized K2Cu2GeS4. The structural parameters are found to be in good agreement with experimental results. The single crystal elastic constants (Cij) are calculated and K2Cu2GeS4 is found to be mechanical stable. The analysis of polycrystalline elastic constants reveals that t…
▽ More
We report the first principles study of structural, elastic, electronic, optical and thermoelectric properties of newly synthesized K2Cu2GeS4. The structural parameters are found to be in good agreement with experimental results. The single crystal elastic constants (Cij) are calculated and K2Cu2GeS4 is found to be mechanical stable. The analysis of polycrystalline elastic constants reveals that the compound is expected to be soft in nature. The values of Pugh and Poisson ratios suggested that the compound lies in the border line of ductile/brittle behavior. The chemical bonding is primarily ionic, the inter-atomic forces are central in nature and the compound is mechanically anisotropic. The computed electronic band profile shows semiconducting characteristics and the estimated band gap is strongly dependent on the functional used representing the exchange correlations. The nature of chemical bonding is explained using electronic charge density mapping. Important optical constants such as dielectric constants, refractive index, absorption coefficient, photoconductivity, reflectivity and loss function are calculated and discussed in detail. Optical conductivity is found to be in good qualitative agreement with the results of band structure calculations. The Seebeck coefficients are positive for the entire temperature range used in this study, suggesting the presence of p-type charge carriers. We have obtained large Seebeck coefficent, 681 V/K at 100 K and 286 V/K at 300 K. At room temperature, the electrical conductivity and electronic thermal conductivity are 1.8 31018 ms)-1 and 0.5 1014 W/mK.s, respectively. The dimensionless figure of merit of K2Cu2GeS4 is evaluated as ~1.0 at 300 K. This suggests that K2Cu2GeS4 is a potential candidate for thermoelectric applications.
△ Less
Submitted 7 January, 2018;
originally announced January 2018.
-
Recently synthesized (Zr1-xTix)2AlC (0 - x - 1) solid solutions: Theoretical study of the effects of M mixing on physical properties
Authors:
M. A. Ali,
M. M. Hossain,
M. A. Hossain,
M. T. Nasir,
M. M. Uddin,
M. Z. Hasan,
S. H. Naqib,
A. K. M. A. Islam
Abstract:
The effects of M atomic species mixing on the physical properties of newly synthesized MAX phase (Zr1-xTix)2AlC solid solutions have been studied by means of density functional theory (DFT) calculations. The lattice constants in good accord with the experimental results, are found to decrease with Ti content. The elastic constants, Cij, and the other polycrystalline elastic moduli have been calcul…
▽ More
The effects of M atomic species mixing on the physical properties of newly synthesized MAX phase (Zr1-xTix)2AlC solid solutions have been studied by means of density functional theory (DFT) calculations. The lattice constants in good accord with the experimental results, are found to decrease with Ti content. The elastic constants, Cij, and the other polycrystalline elastic moduli have been calculated. The elastic constants satisfy the mechanical stability conditions of these solid solutions. The constants C11, C33 and C44 are found to increase with Ti contents up to x = 0.67, thereafter these decrease slightly. A reverse trend is followed by C12 and C13. The elastic moduli are also found to increase up to x = 0.67, beyond which these moduli go down slightly. Pughs ratio and Poissons ratio both confirm the brittleness of (Zr1-xTix)2AlC. Different anisotropy factors revealed the anisotropic character of these solid solutions. A non-vanishing value of the electronic energy density of states (EDOS) at the Fermi level suggests that (Zr1-xTix)2AlC are metallic in nature. A mixture of covalent, ionic and metallic bonding has been indicated from the electronic structure with dominant covalent bonding due to hybridization of Zr-4d states and C-2p states. The variation of elastic stiffness and elastic parameters with x is seen to be correlated with partial DOS (PDOS) and charge density distribution. The calculated Debye temperature and minimum thermal conductivity are found to increase with Ti contents, while melting temperature is the highest for x = 0.67. The solid solution with x = 0.67 shows improved mechanical and thermal properties compared to that of the two end members Zr2AlC and Ti2AlC. The study of charge transport properties of (Zr1-xTix)2AlC reveals the metallic nature with saturated resistivity. The maximum power factor is obtained at 400 K for (Zr1-xTix)2AlC.
△ Less
Submitted 29 October, 2017; v1 submitted 27 September, 2017;
originally announced September 2017.
-
Predicted MAX phase Sc2InC: Dynamical stability, vibrational and optical properties
Authors:
A. Chowdhury,
M. A. Ali,
M. M. Hossain,
M. M. Uddin,
S. H. Naqib,
A. K. M. A. Islam
Abstract:
First principles pseudopotential calculations have been performed for the first time to investigate the phonon dispersion, thermodynamic and optical properties including charge density, Fermi surface, Mulliken population analysis, theoretical Vickers hardness of predicted MAX phase Sc2InC. We revisited the structural, elastic and electronic properties of the compound which assessed the reliability…
▽ More
First principles pseudopotential calculations have been performed for the first time to investigate the phonon dispersion, thermodynamic and optical properties including charge density, Fermi surface, Mulliken population analysis, theoretical Vickers hardness of predicted MAX phase Sc2InC. We revisited the structural, elastic and electronic properties of the compound which assessed the reliability of our calculations. The analysis of the elastic constants and the phonon dispersion along with phonon density of states indicates the mechanical stability and dynamical stability of the MAX phase. The Helmholtz free energy, internal energy, entropy specific heat capacity and Debye temperature have also been calculated from the phonon density of states. Mulliken population analysis indicates the existence of prominent covalency in chemical bonding of Sc2InC. The electronic charge density mapping shows a combination of ionic, covalent and metallic bonding in the compound. The Fermi surface is comprised due to the low dispersive Sc 3d and C 2p states from the [ScC] blocks. The phase is expected to be a soft material and easily mechinable due to its low Vicker hardness value. Furthermore, the analysis of various optical properties (such as dielectric function, refractive index, photoconductivity, absorption coefficients, loss function and reflectivity) suggests that the nanolaminate Sc2InC is a promising candidate for optoelectronic devices in the visible and ultraviolet energy regions and as a coating material to avoid solar heating.
△ Less
Submitted 22 May, 2017;
originally announced May 2017.
-
First-principles study of superconducting ScRhP and ScIrP pnictides
Authors:
M. T. Nasir,
M. A. Hadi,
M. A. Rayhan,
M. A. Ali,
M. M. Hossain,
M. Roknuzzaman,
S. H. Naqib,
A. K. M. A. Islam,
M. M. Uddin,
K. Ostrikov
Abstract:
For the first time, we have reported in this study an ab initio investigation on elastic properties, Debye temperature, Mulliken population, Vickers hardness, and charge density of superconducting ScRhP and ScIrP phosphides. The optimized cell parameters show fair agreement with experimental results. The elastic constants and moduli, Poisson's as well as Pugh's ratio and elastic anisotropy factors…
▽ More
For the first time, we have reported in this study an ab initio investigation on elastic properties, Debye temperature, Mulliken population, Vickers hardness, and charge density of superconducting ScRhP and ScIrP phosphides. The optimized cell parameters show fair agreement with experimental results. The elastic constants and moduli, Poisson's as well as Pugh's ratio and elastic anisotropy factors have also been calculated to understand the mechanical behavior of these ternary compounds. Their mechanical stability is confirmed via the calculated elastic constants. The calculated values for Poisson's and Pugh's ratio indicate the ductile nature of these compounds. ScIrP is expected to be elastically more anisotropic than ScRhP. The estimated value of Debye temperature predicts that ScRhP is thermally more conductive than ScIrP and the phonon frequency in ScRhP is higher than that in ScIrP. The hardness of ScRhP is lower due to the presence of anti-bonding Rh-Rh in ScRhP. The investigated electronic structure predict that the metallic conductivity of ScRhP reduces significantly when Rh is replaced with Ir. The main contribution to the total density of states (TDOS) at Fermi-level (EF) comes from the d-electrons of Sc and Rh/Ir in both compounds. These two ternary compounds are characterized mainly by metallic and covalent bonding with little ionic contribution. As far as superconductivity is concerned, the matrix elements of electron-phonon interaction are noticeably enhanced in ScIrP compared to that in ScRhP.
△ Less
Submitted 17 May, 2017;
originally announced May 2017.
-
Magnetic properties of Sn-substituted Ni-Zn ferrite:synthesized from nano-sized powders of NiO, ZnO, Fe2O3 and SnO2
Authors:
M. A. Ali,
M. M. Uddin,
M. N. I. Khan,
F. -U. -Z. Chowdhury,
S. M. Hoque,
S. I. Liba
Abstract:
A series of Ni0.6-x/2Zn0.4-x/2SnxFe2O4 (x = 0.0, 0.05, 0.1, 0.15, 0.2 and 0.3) (NZSFO) ferrite composites have been synthesized from nano powders using standard solid state reaction technique. The spinel cubic structure of the investigated samples has been observed by the X-ray diffraction (XRD). The magnetic properties such as saturation magnetization (Ms), remanent magnetization (Mr), coercive f…
▽ More
A series of Ni0.6-x/2Zn0.4-x/2SnxFe2O4 (x = 0.0, 0.05, 0.1, 0.15, 0.2 and 0.3) (NZSFO) ferrite composites have been synthesized from nano powders using standard solid state reaction technique. The spinel cubic structure of the investigated samples has been observed by the X-ray diffraction (XRD). The magnetic properties such as saturation magnetization (Ms), remanent magnetization (Mr), coercive field (Hc) and Bohr magneton (B) are calculated from the hysteresis loops. The value of Ms is found to decrease with increasing Sn content in the samples. This change has been successfully explained by the variation of A-B interaction strength due to Sn substitution in different sites. The compositional stability and quality of the prepared ferrite composites have also been endorsed by the fairly constant initial permeability (/) over a wide range of frequency region. The decreasing trend of / with increasing Sn content has been observed. Curie temperature (TC) has found to increase with the increase in Sn content. Wide spread frequency utility zone indicates that the NZSFO can be considered as a good candidate for use in broadband pulse transformer and wide band read-write heads for video recording. The abnormal behavior for x = 0.05 has been explained with existing theory.
△ Less
Submitted 18 March, 2017;
originally announced March 2017.
-
Design and Performance Analysis of Depletion-Mode InSb Quantum-Well Field-Effect Transistor for Logic Applications
Authors:
R. Islam,
M. M. Uddin,
M. Mofazzal Hossain,
M. B. Santos,
M. A. Matin,
Y. Hirayama
Abstract:
The design of a 1 micrometer gate length depletion-mode InSb quantum-well field-effect transistor (QWFET) with a 10 nm-thick Al2O3 gate dielectric has been optimized using a quantum corrected self-consistent Schrodinger-Poisson (QCSP) and two dimensional drift-diffusion model. The model predicts a very high electron mobility of 4.42 m2V-1s-1 at Vg= 0V, a small pinch off gate voltage (Vp) of -0.25V…
▽ More
The design of a 1 micrometer gate length depletion-mode InSb quantum-well field-effect transistor (QWFET) with a 10 nm-thick Al2O3 gate dielectric has been optimized using a quantum corrected self-consistent Schrodinger-Poisson (QCSP) and two dimensional drift-diffusion model. The model predicts a very high electron mobility of 4.42 m2V-1s-1 at Vg= 0V, a small pinch off gate voltage (Vp) of -0.25V, a maximum extrinsic transconductance (gm) of 4.94 S/mm and a drain current density of more than 6.04 A/mm. A short-circuit current-gain cut-off frequency (fT) of 374 GHz and a maximum oscillation frequency (fmax) of 645 GHz are predicted for the device. These characteristics make the device a potential candidate for low power, high-speed logic electronic device applications.
△ Less
Submitted 26 June, 2016;
originally announced June 2016.
-
Structural and electrical properties of Sn substituted double sintering derived Ni-Zn ferrite
Authors:
M. A. Ali,
M. N. I. Khan,
F. -U. -Z. Chowdhury,
S. M. Haque,
M. M. Uddin
Abstract:
The Sn substituted Ni-Zn ferrites were synthesized by the standard double sintering technique using nano powders of nickel oxide (NiO), zinc oxide (ZnO), iron oxide (Fe2O3) and tin oxide (SnO2). The structural and electrical properties have been investigated by the X-ray diffraction, scanning electron microscopy, DC resistivity and dielectric measurements. Extra intermediate phase has been detecte…
▽ More
The Sn substituted Ni-Zn ferrites were synthesized by the standard double sintering technique using nano powders of nickel oxide (NiO), zinc oxide (ZnO), iron oxide (Fe2O3) and tin oxide (SnO2). The structural and electrical properties have been investigated by the X-ray diffraction, scanning electron microscopy, DC resistivity and dielectric measurements. Extra intermediate phase has been detected along with the inverse cubic spinel phase of Ni-Zn ferrite. Enhancement of grain size is observed in Sn substituted Ni-Zn ferrites. DC resistivity as a function of temperature has been investigated by two probe method. The DC resistivity was found to decrease whereas the dielectric constants increase with increasing Sn content in Ni-Zn ferrites. The dielectric constant of the as prepared samples is high enough to use these materials in miniaturized memory devices based capacitive components or energy storage principles.
△ Less
Submitted 26 June, 2016;
originally announced June 2016.
-
Effect of Sintering Temperature on Structural and Magnetic Properties of Ni0.6Zn0.4Fe2O4 Ferrite: Synthesized from Nanocrystalline Powders
Authors:
M. A. Ali,
M. N. I. Khan,
F. -U. -Z. Chowdhury,
D. K. Saha,
S. M. Hoque,
S. I. Liba,
S. Akhter,
M. M. Uddin
Abstract:
The effect of sintering temperatures (Ts) on the structural and magnetic properties of Ni0.6Zn0.4Fe2O4 (NZFO) ferrites synthesized by conventional double sintering method has been reported. The samples are sintered at 1200, 1250 and 1300 °C. The X-ray diffraction (XRD) analysis reveals the formation of a single phase cubic spinel structure of the sample. The magnetic parameters such as saturation…
▽ More
The effect of sintering temperatures (Ts) on the structural and magnetic properties of Ni0.6Zn0.4Fe2O4 (NZFO) ferrites synthesized by conventional double sintering method has been reported. The samples are sintered at 1200, 1250 and 1300 °C. The X-ray diffraction (XRD) analysis reveals the formation of a single phase cubic spinel structure of the sample. The magnetic parameters such as saturation magnetization, Ms; coercive field, Hc; remanent magnetization, Mr and Bohr magneton, μB are determined and well compared with reported values. The obtained values are found to be 71.94 emu/gm and 1.2 Oe for Ms and Hc, respectively at Ts=1300 oC. Curie temperature (Tc) at various Ts has also been calculated. It is noteworthy to note that the sample with a very low Hc could be used in transformer core and inductor applications.
△ Less
Submitted 12 April, 2016; v1 submitted 20 June, 2015;
originally announced June 2015.
-
Structural Properties, Impedance Spectroscopy and Dielectric Spin Relaxation of Ni-Zn Ferrite Synthesized by Double Sintering Technique
Authors:
M. A. Ali,
M. N. I. Khan,
F. -U. -Z. Chowdhury,
S. Akhter,
M. M. Uddin
Abstract:
Structural properties, impedance, dielectric and electric modulus spectra have been used to investigate the sintering temperature (Ts) effect on the single phase cubic spinel Ni0.6Zn0.4Fe2O4 (NZFO) ceramics synthesized by standard ceramic technique. Enhancement of dielectric constants is observed with increasing Ts. The collective contribution of n-type and p-type carriers yields a clear peak in n…
▽ More
Structural properties, impedance, dielectric and electric modulus spectra have been used to investigate the sintering temperature (Ts) effect on the single phase cubic spinel Ni0.6Zn0.4Fe2O4 (NZFO) ceramics synthesized by standard ceramic technique. Enhancement of dielectric constants is observed with increasing Ts. The collective contribution of n-type and p-type carriers yields a clear peak in notable unusual dielectric behavior is successfully explained by the Rezlescu model. The non-Debye type long range dielectric relaxation phenomena is explained by electric modulus formalism. Fast response of the grain boundaries of the sample sintered at lower Ts sample leading to small dielectric spin relaxation time, t (several nanoseconds) have been determined using electric modulus spectra for the samples sintered at different Ts. Two clear semicircles in impedance Cole-Cole plot have also been successfully explained by employing two parallel RC equivalent circuits in series configuration taking into account no electrode contribution. Such a long relaxation time in NZFO ceramics could suitably be used in nanoscale spintronic devices.
△ Less
Submitted 11 June, 2015; v1 submitted 24 May, 2015;
originally announced May 2015.
-
Gate depletion of an InSb two-dimensional electron gas
Authors:
M. M. Uddin,
H. W. Liu,
K. F. Yang,
K. Nagase,
K. Sekine,
C. K. Gaspe,
T. D. Mishima,
M. B. Santos,
Y. Hirayama
Abstract:
We investigated the gate control of a two-dimensional electron gas (2DEG) confined to InSb quantum wells with an Al2O3 gate dielectric formed by atomic layer deposition on a surface layer of Al0.1In0.9Sb or InSb. The wider bandgap of Al0.1In0.9Sb compared to InSb resulted in a linear, sharp, and non-hysteretic response of the 2DEG density to gate bias in the structure with an Al0.1In0.9Sb surface…
▽ More
We investigated the gate control of a two-dimensional electron gas (2DEG) confined to InSb quantum wells with an Al2O3 gate dielectric formed by atomic layer deposition on a surface layer of Al0.1In0.9Sb or InSb. The wider bandgap of Al0.1In0.9Sb compared to InSb resulted in a linear, sharp, and non-hysteretic response of the 2DEG density to gate bias in the structure with an Al0.1In0.9Sb surface layer. In contrast, a nonlinear, slow, and hysteretic (nonvolatile-memory-like) response was observed in the structure with an InSb surface layer. The 2DEG with the Al0.1In0.9Sb surface layer was completely depleted by application of a small gate voltage (-0.9 V).
△ Less
Submitted 18 September, 2013;
originally announced September 2013.
-
Characterization of InSb quantum wells with atomic layer deposited gate dielectrics
Authors:
M. M. Uddin,
H. W. Liu,
K. F. Yang,
K. Nagase,
T. D. Mishima,
M. B. Santos,
Y. Hirayama
Abstract:
We report magnetotransport measurements of a gated InSb quantum well (QW) with high quality Al2O3 dielectrics (40 nm thick) grown by atomic layer deposition. The magnetoresistance data demonstrate a parallel conduction channel in the sample at zero gate voltage (Vg). A good interface between Al2O3 and the top InSb layer ensures that the parallel channel is depleted at negative Vg and the density o…
▽ More
We report magnetotransport measurements of a gated InSb quantum well (QW) with high quality Al2O3 dielectrics (40 nm thick) grown by atomic layer deposition. The magnetoresistance data demonstrate a parallel conduction channel in the sample at zero gate voltage (Vg). A good interface between Al2O3 and the top InSb layer ensures that the parallel channel is depleted at negative Vg and the density of two-dimensional electrons in the QW is tuned by Vg with a large ratio of 6.5x1014 m-2V-1 but saturates at large negative Vg. These findings are closely related to layer structures of the QW as suggested by self-consistent Schrodinger-Poisson simulation and two-carrier model.
△ Less
Submitted 6 December, 2012;
originally announced December 2012.