-
Hidden mechanical oscillatory state in a carbon nanotube revealed by noise
Authors:
P. Belardinelli,
W. Yang,
A. Bachtold,
M. I. Dykman,
F. Alijani
Abstract:
Carbon nanotubes are devices of choice for investigating the interplay between electronic transport and nanomechanical motion. In this work, we report the co-existence of thermal vibrations and large-amplitude self-sustained oscillations in a carbon nanotube that originates from electron tunneling and thermal effects. The measured transitions between the two states are described by a Poisson proce…
▽ More
Carbon nanotubes are devices of choice for investigating the interplay between electronic transport and nanomechanical motion. In this work, we report the co-existence of thermal vibrations and large-amplitude self-sustained oscillations in a carbon nanotube that originates from electron tunneling and thermal effects. The measured transitions between the two states are described by a Poisson process, revealing that the interstate switching is induced by noise. We observe the coexistence of the stable low-amplitude thermal state and the stable large-amplitude state (limit cycle) over a finite parameter range, which points to an isola bifurcation. We propose a minimalistic model based on nonlinear friction to account for the isola. Our work provides evidence for a new type of bifurcation leading to self-sustained oscillations that largely differs from the classical Hopf bifurcation, since these large-amplitude oscillations are a hidden state that can be unveiled via stochastic switching. We envision that this new dynamical regime and the means to reveal it will be of interest for various mesoscopic vibrational systems.
△ Less
Submitted 21 December, 2023;
originally announced December 2023.
-
Giant ultra-broadband photoconductivity in twisted graphene heterostructures
Authors:
Hitesh Agarwal,
Krystian Nowakowski,
Andres Forrer,
Alessandro Principi,
Riccardo Bertini,
Sergi Batlle-Porro,
Antoine Reserbat-Plantey,
Parmeshwar Prasad,
Lorenzo Vistoli,
Kenji Watanabe,
Takashi Taniguchi,
Adrian Bachtold,
Giacomo Scalari,
Roshan Krishna Kumar,
Frank H. L. Koppens
Abstract:
The requirements for broadband photodetection are becoming exceedingly demanding in hyperspectral imaging. Whilst intrinsic photoconductor arrays based on mercury cadmium telluride represent the most sensitive and suitable technology, their optical spectrum imposes a narrow spectral range with a sharp absorption edge that cuts their operation to < 25 um. Here, we demonstrate a giant ultra-broadban…
▽ More
The requirements for broadband photodetection are becoming exceedingly demanding in hyperspectral imaging. Whilst intrinsic photoconductor arrays based on mercury cadmium telluride represent the most sensitive and suitable technology, their optical spectrum imposes a narrow spectral range with a sharp absorption edge that cuts their operation to < 25 um. Here, we demonstrate a giant ultra-broadband photoconductivity in twisted double bilayer graphene heterostructures spanning a spectral range of 2 - 100 um with internal quantum efficiencies ~ 40 % at speeds of 100 kHz. The giant response originates from unique properties of twist-decoupled heterostructures including pristine, crystal field induced terahertz band gaps, parallel photoactive channels, and strong photoconductivity enhancements caused by interlayer screening of electronic interactions by respective layers acting as sub-atomic spaced proximity screening gates. Our work demonstrates a rare instance of an intrinsic infrared-terahertz photoconductor that is complementary metal-oxide-semiconductor compatible and array integratable, and introduces twist-decoupled graphene heterostructures as a viable route for engineering gapped graphene photodetectors with 3D scalability.
△ Less
Submitted 4 September, 2023;
originally announced September 2023.
-
Nonlinear nanomechanical resonators approaching the quantum ground state
Authors:
C. Samanta,
S. L. De Bonis,
C. B. Møller,
R. Tormo-Queralt,
W. Yang,
C. Urgell,
B. Stamenic,
B. Thibeault,
Y. Jin,
D. A. Czaplewski,
F. Pistolesi,
A. Bachtold
Abstract:
An open question in mechanics is whether mechanical resonators can be made nonlinear with vibrations approaching the quantum ground state. This requires engineering a mechanical nonlinearity far beyond what has been realized thus far. Here we discovered a mechanism to boost the Duffing nonlinearity by coupling the vibrations of a nanotube resonator to single-electron tunneling and by operating the…
▽ More
An open question in mechanics is whether mechanical resonators can be made nonlinear with vibrations approaching the quantum ground state. This requires engineering a mechanical nonlinearity far beyond what has been realized thus far. Here we discovered a mechanism to boost the Duffing nonlinearity by coupling the vibrations of a nanotube resonator to single-electron tunneling and by operating the system in the ultrastrong coupling regime. Remarkably, thermal vibrations become highly nonlinear when lowering the temperature. The average vibration amplitude at the lowest temperature is 13 times the zero-point motion, with approximately 42% of the thermal energy stored in the anharmonic part of the potential. Our work paves the way for realizing mechanical Schrodinger cat states [1], mechanical qubits [2, 3], and quantum simulators emulating the electron-phonon coupling [4].
△ Less
Submitted 14 November, 2022;
originally announced November 2022.
-
Nanomechanical Resonators: Toward Atomic Scale
Authors:
Bo Xu,
Pengcheng Zhang,
Jiankai Zhu,
Zuheng Liu,
Alexander Eichler,
Xu-Qian Zheng,
Jaesung Lee,
Aneesh Dash,
Swapnil More,
Song Wu,
Yanan Wang,
Hao Jia,
Akshay Naik,
Adrian Bachtold,
Rui Yang,
Philip X. -L. Feng,
Zenghui Wang
Abstract:
The quest for realizing and manipulating ever smaller man-made movable structures and dynamical machines has spurred tremendous endeavors, led to important discoveries, and inspired researchers to venture to new grounds. Scientific feats and technological milestones of miniaturization of mechanical structures have been widely accomplished by advances in machining and sculpturing ever shrinking fea…
▽ More
The quest for realizing and manipulating ever smaller man-made movable structures and dynamical machines has spurred tremendous endeavors, led to important discoveries, and inspired researchers to venture to new grounds. Scientific feats and technological milestones of miniaturization of mechanical structures have been widely accomplished by advances in machining and sculpturing ever shrinking features out of bulk materials such as silicon. With the flourishing multidisciplinary field of low-dimensional nanomaterials, including one-dimensional (1D) nanowires/nanotubes, and two-dimensional (2D) atomic layers such as graphene/phosphorene, growing interests and sustained efforts have been devoted to creating mechanical devices toward the ultimate limit of miniaturization--genuinely down to the molecular or even atomic scale. These ultrasmall movable structures, particularly nanomechanical resonators that exploit the vibratory motion in these 1D and 2D nano-to-atomic-scale structures, offer exceptional device-level attributes, such as ultralow mass, ultrawide frequency tuning range, broad dynamic range, and ultralow power consumption, thus holding strong promises for both fundamental studies and engineering applications. In this Review, we offer a comprehensive overview and summary of this vibrant field, present the state-of-the-art devices and evaluate their specifications and performance, outline important achievements, and postulate future directions for studying these miniscule yet intriguing molecular-scale machines.
△ Less
Submitted 20 November, 2022; v1 submitted 15 August, 2022;
originally announced August 2022.
-
Engineering high quality graphene superlattices via ion milled ultra-thin etching masks
Authors:
David Barcons Ruiz,
Hanan Herzig Sheinfux,
Rebecca Hoffmann,
Iacopo Torre,
Hitesh Agarwal,
Roshan Krishna Kumar,
Lorenzo Vistoli,
Takashi Taniguchi,
Kenji Watanabe,
Adrian Bachtold,
Frank H. L. Koppens
Abstract:
Nanofabrication research pursues the miniaturization of patterned feature size. In the current state of the art, micron scale areas can be patterned with features down to ~ 30 nm pitch using electron beam lithography. Our work demonstrates a new nanofabrication technique which allows patterning periodic structures with a pitch down to 16 nm. It is based on focused ion beam milling of suspended mem…
▽ More
Nanofabrication research pursues the miniaturization of patterned feature size. In the current state of the art, micron scale areas can be patterned with features down to ~ 30 nm pitch using electron beam lithography. Our work demonstrates a new nanofabrication technique which allows patterning periodic structures with a pitch down to 16 nm. It is based on focused ion beam milling of suspended membranes, with minimal proximity effects typical to electron beam lithography. The membranes are then transferred and used as hard etching masks. We benchmark our technique by engineering a superlattice potential in single layer graphene using a thin graphite patterned gate electrode. Our electronic transport characterization shows high quality superlattice properties and a rich Hofstadter butterfly spectrum. Our technique opens the path towards the realization of very short period superlattices in 2D materials, comparable to those in natural moire systems, but with the ability to control lattice symmetries and strength. This can pave the way for a versatile solid-state quantum simulator platform and the study of correlated electron phases.
△ Less
Submitted 2 February, 2023; v1 submitted 28 July, 2022;
originally announced July 2022.
-
Nanomechanical vibrational response from electrical mixing measurements
Authors:
C. Samanta,
D. A. Czaplewski,
S. L. De Bonis,
C. B. Moller,
R. Tormo Queralt,
C. S. Miller,
Y. Jin,
F. Pistolesi,
A. Bachtold
Abstract:
Driven nanomechanical resonators based on low-dimensional materials are routinely and efficiently detected with electrical mixing measurements. However, the measured signal is a non-trivial combination of the mechanical eigenmode displacement and an electrical contribution, which makes the extraction of the driven mechanical response challenging. Here, we report a simple yet reliable method to ext…
▽ More
Driven nanomechanical resonators based on low-dimensional materials are routinely and efficiently detected with electrical mixing measurements. However, the measured signal is a non-trivial combination of the mechanical eigenmode displacement and an electrical contribution, which makes the extraction of the driven mechanical response challenging. Here, we report a simple yet reliable method to extract solely the driven mechanical vibrations by eliminating the contribution of pure electrical origin. This enables us to measure the spectral mechanical response as well as the driven quadratures of motion. We further show how to calibrate the measured signal into units of displacement. Additionally, we utilize the pure electrical contribution to directly determine the effective mass of the measured mechanical mode. Our method marks a key step forward in the study of nanoelectromechanical resonators based on low-dimensional materials in both the linear and the nonlinear regime.
△ Less
Submitted 5 July, 2022;
originally announced July 2022.
-
Steady-state Peierls transition in nanotube quantum simulator
Authors:
Lin Zhang,
Utso Bhattacharya,
Adrian Bachtold,
Stefan Forstner,
Maciej Lewenstein,
Fabio Pistolesi,
Tobias Grass
Abstract:
Quantum dots placed along a vibrating nanotube provide a quantum simulation platform that can directly address the electron-phonon interaction. This offers promising prospects for the search of new quantum materials and the study of strong correlation effects. As this platform is naturally operated by coupling the dots to an electronic reservoir, state preparation is straightforwardly achieved by…
▽ More
Quantum dots placed along a vibrating nanotube provide a quantum simulation platform that can directly address the electron-phonon interaction. This offers promising prospects for the search of new quantum materials and the study of strong correlation effects. As this platform is naturally operated by coupling the dots to an electronic reservoir, state preparation is straightforwardly achieved by driving into the steady state. Here we show that for intermediate electron-phonon coupling strength, the system with spin-polarized quantum dots undergoes a Peierls transition into an insulating regime which exhibits charge-density wave order in the steady state as a consequence of the competition between electronic Coulomb repulsive interactions and phonon-induced attractive interactions. The transport phenomena can be directly observed as fingerprints of electronic correlations. We also present powerful methods to numerically capture the physics of such an open electron-phonon system at large numbers of phonons. Our work paves the way to study and detect correlated electron-phonon physics in the nanotube quantum simulator with current experimentally accessible techniques.
△ Less
Submitted 7 February, 2023; v1 submitted 16 June, 2022;
originally announced June 2022.
-
Mesoscopic physics of nanomechanical systems
Authors:
Adrian Bachtold,
Joel Moser,
M. I. Dykman
Abstract:
Nanomechanics has brought mesoscopic physics into the world of vibrations. Because nanomechanical systems are small, fluctuations are significant, the vibrations become nonlinear already for comparatively small amplitudes, and new mechanisms of dissipation come into play. At the same time, the exquisite control of these systems makes them a platform for studying many problems of classical and quan…
▽ More
Nanomechanics has brought mesoscopic physics into the world of vibrations. Because nanomechanical systems are small, fluctuations are significant, the vibrations become nonlinear already for comparatively small amplitudes, and new mechanisms of dissipation come into play. At the same time, the exquisite control of these systems makes them a platform for studying many problems of classical and quantum physics far from thermal equilibrium in a well-characterized setting. This review describes, at a conceptual level, basic theoretical ideas and explicative experiments pertaining to mesoscopic physics of nanomechanical systems. Major applications of nanomechanics in science and technology are also outlined. A broad range of phenomena related to the conservative as well as dissipative nonlinearity and fluctuations are discussed within a unifying framework. They include the linear response of single and coupled vibrational modes as well as nonlinear effects of periodic driving. Such driving breaks the continuous time-translation symmetry and the detailed balance, with conspicuous consequences for fluctuations, particularly in the presence of the driving-induced bi- and multistability. Mathematical techniques are described in the appendices to streamline the reading, but also to provide an introduction to the theory. The goal of the review is to show the richness of the physics at work. The continuous experimental and theoretical advances make nanomechanical systems a vibrant area of research, with many new phenomena to discover.
△ Less
Submitted 3 February, 2022;
originally announced February 2022.
-
Phonon-induced pairing in quantum dot quantum simulator
Authors:
Utso Bhattacharya,
Tobias Graß,
Adrian Bachtold,
Maciej Lewenstein,
Fabio Pistolesi
Abstract:
Quantum simulations can provide new insights into the physics of strongly correlated electronic systems. A well studied system, but still open in many regards, is the Hubbard-Holstein Hamiltonian, where electronic repulsion is in competition with attraction generated by the electron-phonon coupling. In this context we study the phase diagram of four quantum dots in a suspended carbon nanotube and…
▽ More
Quantum simulations can provide new insights into the physics of strongly correlated electronic systems. A well studied system, but still open in many regards, is the Hubbard-Holstein Hamiltonian, where electronic repulsion is in competition with attraction generated by the electron-phonon coupling. In this context we study the phase diagram of four quantum dots in a suspended carbon nanotube and coupled to its flexural degrees of freedom. The system is described by a Hamiltonian of the Hubbard-Holstein class, where electrons on different sites interact with the same phonon. We find that the system presents a transition from the Mott insulating state to a polaronic state, with the appearance of pairing correlations and the breaking of the translational symmetry. Our study shows that this system thus constitutes a relevant example of a correlated system that could be studied by experimental realization.
△ Less
Submitted 17 June, 2021;
originally announced June 2021.
-
Mass sensing for the advanced fabrication of nanomechanical resonators
Authors:
G. Gruber,
C. Urgell,
A. Tavernarakis,
A. Stavrinadis,
S. Tepsic,
C. Magen,
S. Sangiao,
J. M. de Teresa,
P. Verlot,
A. Bachtold
Abstract:
We report on a nanomechanical engineering method to monitor matter growth in real time via e-beam electromechanical coupling. This method relies on the exceptional mass sensing capabilities of nanomechanical resonators. Focused electron beam induced deposition (FEBID) is employed to selectively grow platinum particles at the free end of singly clamped nanotube cantilevers. The electron beam has tw…
▽ More
We report on a nanomechanical engineering method to monitor matter growth in real time via e-beam electromechanical coupling. This method relies on the exceptional mass sensing capabilities of nanomechanical resonators. Focused electron beam induced deposition (FEBID) is employed to selectively grow platinum particles at the free end of singly clamped nanotube cantilevers. The electron beam has two functions: it allows both to grow material on the nanotube and to track in real time the deposited mass by probing the noise-driven mechanical resonance of the nanotube. On the one hand, this detection method is highly effective as it can resolve mass deposition with a resolution in the zeptogram range; on the other hand, this method is simple to use and readily available to a wide range of potential users, since it can be operated in existing commercial FEBID systems without making any modification. The presented method allows to engineer hybrid nanomechanical resonators with precisely tailored functionality. It also appears as a new tool for studying growth dynamics of ultra-thin nanostructures, opening new opportunities for investigating so far out-of-reach physics of FEBID and related methods.
△ Less
Submitted 22 January, 2021;
originally announced January 2021.
-
Interrelation of elasticity and thermal bath in nanotube cantilevers
Authors:
S. Tepsic,
G. Gruber,
C. B. Moller,
C. Magen,
P. Belardinelli,
E. R. Hernadez,
F. Alijani,
P. Verlot,
A. Bachtold
Abstract:
We report the first study on the thermal behaviour of the stiffness of individual carbon nanotubes, which is achieved by measuring the resonance frequency of their fundamental mechanical bending modes. We observe a reduction of the Young's modulus over a large temperature range with a slope $-(173\pm 65)$ ppm/K in its relative shift. These findings are reproduced by two different theoretical model…
▽ More
We report the first study on the thermal behaviour of the stiffness of individual carbon nanotubes, which is achieved by measuring the resonance frequency of their fundamental mechanical bending modes. We observe a reduction of the Young's modulus over a large temperature range with a slope $-(173\pm 65)$ ppm/K in its relative shift. These findings are reproduced by two different theoretical models based on the thermal dynamics of the lattice. These results reveal how the measured fundamental bending modes depend on the phonons in the nanotube via the Young's modulus. An alternative description based on the coupling between the measured mechanical modes and the phonon thermal bath in the Akhiezer limit is discussed.
△ Less
Submitted 23 March, 2021; v1 submitted 22 January, 2021;
originally announced January 2021.
-
Proposal for a nanomechanical qubit
Authors:
F. Pistolesi,
A. N. Cleland,
A. Bachtold
Abstract:
Mechanical oscillators have been demonstrated with very high quality factors over a wide range of frequencies. These also couple to a wide variety of fields and forces, making them ideal as sensors. The realization of a mechanically-based quantum bit could therefore provide an important new platform for quantum computation and sensing. Here we show that by coupling one of the flexural modes of a s…
▽ More
Mechanical oscillators have been demonstrated with very high quality factors over a wide range of frequencies. These also couple to a wide variety of fields and forces, making them ideal as sensors. The realization of a mechanically-based quantum bit could therefore provide an important new platform for quantum computation and sensing. Here we show that by coupling one of the flexural modes of a suspended carbon nanotube to the charge states of a double quantum dot defined in the nanotube, it is possible to induce sufficient anharmonicity in the mechanical oscillator so that the coupled system can be used as a mechanical quantum bit. This can however only be achieved when the device enters the ultrastrong coupling regime. We discuss the conditions for the anharmonicity to appear, and we show that the Hamiltonian can be mapped onto an anharmonic oscillator, allowing us to work out the energy level structure and how decoherence from the quantum dot and the mechanical oscillator are inherited by the qubit. Remarkably, the dephasing due to the quantum dot is expected to be reduced by several orders of magnitude in the coupled system. We outline qubit control, readout protocols, the realization of a CNOT gate by coupling two qubits to microwave cavity, and finally how the qubit can be used as a static force quantum sensor.
△ Less
Submitted 23 August, 2021; v1 submitted 24 August, 2020;
originally announced August 2020.
-
Fabry-Pérot oscillations in correlated carbon nanotubes
Authors:
W. Yang,
C. Urgell,
S. L. De Bonis,
M. Marganska,
M. Grifoni,
A. Bachtold
Abstract:
We report the observation of an intriguing behaviour in the transport properties of nanodevices operating in a regime between the Fabry-Pérot and the Kondo limits. Using ultra-high quality nanotube devices, we study how the conductance oscillates when sweeping the gate voltage. Surprisingly, we observe a four-fold enhancement of the oscillation period upon decreasing temperature, signaling a cross…
▽ More
We report the observation of an intriguing behaviour in the transport properties of nanodevices operating in a regime between the Fabry-Pérot and the Kondo limits. Using ultra-high quality nanotube devices, we study how the conductance oscillates when sweeping the gate voltage. Surprisingly, we observe a four-fold enhancement of the oscillation period upon decreasing temperature, signaling a crossover from single-electron tunneling to Fabry-Pérot interference. These results suggest that the Fabry-Pérot interference occurs in a regime where electrons are correlated. The link between the measured correlated Fabry-Pérot oscillations and the SU(4) Kondo effect is discussed.
△ Less
Submitted 25 September, 2020; v1 submitted 18 March, 2020;
originally announced March 2020.
-
Electrical control of lifetime-limited quantum emitters using 2D materials
Authors:
K. Schädler,
C. Ciancico,
S. Pazzagli,
P. Lombardi,
A. Bachtold,
C. Toninelli,
A. Reserbat-Plantey,
F. Koppens
Abstract:
Solid state quantum emitters are a mainstay of quantum nanophotonics as integrated single photon sources (SPS) and optical nanoprobes. Integrating such emitters with active nanophotonic elements is desirable in order to attain efficient control of their optical properties but typically degrades the photostability of the emitter itself. Here, we demonstrate a tuneable hybrid device that integrates…
▽ More
Solid state quantum emitters are a mainstay of quantum nanophotonics as integrated single photon sources (SPS) and optical nanoprobes. Integrating such emitters with active nanophotonic elements is desirable in order to attain efficient control of their optical properties but typically degrades the photostability of the emitter itself. Here, we demonstrate a tuneable hybrid device that integrates lifetime-limited single emitters (linewidth : 40 MHz) and 2D materials at sub-wavelength separation without degradation of the emission properties. Our device s nanoscale dimensions enable ultra-broadband tuning (tuning range larger than 400 GHz) and fast modulation (frequency : 100 MHz) of the emission energy, which renders it an integrated, ultra-compact tuneable SPS. Conversely, this offers a novel approach to optical sensing of 2D material properties using a single emitter as a nanoprobe.
△ Less
Submitted 15 May, 2019;
originally announced May 2019.
-
Optomechanical measurement of thermal transport in two-dimensional MoSe2 lattices
Authors:
Nicolas Morell,
Slaven Tepsic,
Antoine Reserbat-Plantey,
Andrea Cepellotti,
Marco Manca,
Itai Epstein,
Andreas Isacsson,
Xavier Marie,
Francesco Mauri,
Adrian Bachtold
Abstract:
Nanomechanical resonators have emerged as sensors with exceptional sensitivities. These sensing capabilities open new possibilities in the studies of the thermodynamic properties in condensed matter. Here, we use mechanical sensing as a novel approach to measure the thermal properties of low-dimensional materials. We measure the temperature dependence of both the thermal conductivity and the speci…
▽ More
Nanomechanical resonators have emerged as sensors with exceptional sensitivities. These sensing capabilities open new possibilities in the studies of the thermodynamic properties in condensed matter. Here, we use mechanical sensing as a novel approach to measure the thermal properties of low-dimensional materials. We measure the temperature dependence of both the thermal conductivity and the specific heat capacity of a transition metal dichalcogenide (TMD) monolayer down to cryogenic temperature, something that has not been achieved thus far with a single nanoscale object. These measurements show how heat is transported by phonons in two-dimensional systems. Both the thermal conductivity and the specific heat capacity measurements are consistent with predictions based on first-principles.
△ Less
Submitted 2 May, 2019;
originally announced May 2019.
-
Superconductors, Orbital Magnets, and Correlated States in Magic Angle Bilayer Graphene
Authors:
Xiaobo Lu,
Petr Stepanov,
Wei Yang,
Ming Xie,
Mohammed Ali Aamir,
Ipsita Das,
Carles Urgell,
Kenji Watanabe,
Takashi Taniguchi,
Guangyu Zhang,
Adrian Bachtold,
Allan H. MacDonald,
Dmitri K. Efetov
Abstract:
Superconductivity often occurs close to broken-symmetry parent states and is especially common in doped magnetic insulators. When twisted close to a magic relative orientation angle near 1 degree, bilayer graphene has flat moire superlattice minibands that have emerged as a rich and highly tunable source of strong correlation physics, notably the appearance of superconductivity close to interactio…
▽ More
Superconductivity often occurs close to broken-symmetry parent states and is especially common in doped magnetic insulators. When twisted close to a magic relative orientation angle near 1 degree, bilayer graphene has flat moire superlattice minibands that have emerged as a rich and highly tunable source of strong correlation physics, notably the appearance of superconductivity close to interaction-induced insulating states. Here we report on the fabrication of bilayer graphene devices with exceptionally uniform twist angles. We show that the reduction in twist angle disorder reveals insulating states at all integer occupancies of the four-fold spin/valley degenerate flat conduction and valence bands, i.e. at moire band filling factors nu = 0, +(-) 1, +(-) 2, +(-) 3, and superconductivity below critical temperatures as high as 3 K close to - 2 filling. We also observe three new superconducting domes at much lower temperatures close to the nu = 0 and nu = +(-) 1 insulating states. Interestingly, at nu = +(-) 1 we find states with non-zero Chern numbers. For nu = - 1 the insulating state exhibits a sharp hysteretic resistance enhancement when a perpendicular magnetic field above 3.6 tesla is applied, consistent with a field driven phase transition. Our study shows that symmetry-broken states, interaction driven insulators, and superconducting domes are common across the entire moire flat bands, including near charge neutrality.
△ Less
Submitted 10 April, 2019; v1 submitted 15 March, 2019;
originally announced March 2019.
-
Cooling and Self-Oscillation in a Nanotube Electro-Mechanical Resonator
Authors:
C. Urgell,
W. Yang,
S. L. de Bonis,
C. Samanta,
M. J. Esplandiu,
Q. Dong,
Y. Jin,
A. Bachtold
Abstract:
Nanomechanical resonators are used with great success to couple mechanical motion to other degrees of freedom, such as photons, spins, and electrons. Mechanical vibrations can be efficiently cooled and amplified using photons, but not with other degrees of freedom. Here, we demonstrate a simple yet powerful method for cooling, amplification, and self-oscillation using electrons. This is achieved b…
▽ More
Nanomechanical resonators are used with great success to couple mechanical motion to other degrees of freedom, such as photons, spins, and electrons. Mechanical vibrations can be efficiently cooled and amplified using photons, but not with other degrees of freedom. Here, we demonstrate a simple yet powerful method for cooling, amplification, and self-oscillation using electrons. This is achieved by applying a constant (DC) current of electrons through a suspended nanotube in a dilution fridge. We demonstrate cooling down to $4.6\pm 2.0$ quanta of vibrations. We also observe self-oscillation, which can lead to prominent instabilities in the electron transport through the nanotube. We attribute the origin of the observed cooling and self-oscillation to an electrothermal effect. This work shows that electrons may become a useful resource for quantum manipulation of mechanical resonators.
△ Less
Submitted 12 March, 2019;
originally announced March 2019.
-
Layering transitions in superfluid helium adsorbed on a carbon nanotube mechanical resonator
Authors:
Adrien Noury,
Jorge Vergara-Cruz,
Pascal Morfin,
Bernard Plaçais,
Maria Carmen Gordillo,
Jordi Boronat,
Sébastien Balibar,
Adrian Bachtold
Abstract:
Helium is recognized as a model system for the study of phase transitions. Of particular interest is the superfluid phase in two dimensions. We report measurements on superfluid helium films adsorbed on the surface of a suspended carbon nanotube. We measure the mechanical vibrations of the nanotube to probe the adsorbed helium film. We demonstrate the formation of helium layers up to five atoms th…
▽ More
Helium is recognized as a model system for the study of phase transitions. Of particular interest is the superfluid phase in two dimensions. We report measurements on superfluid helium films adsorbed on the surface of a suspended carbon nanotube. We measure the mechanical vibrations of the nanotube to probe the adsorbed helium film. We demonstrate the formation of helium layers up to five atoms thickness. Upon increasing the vapour pressure, we observe layer-by-layer growth with discontinuities in both the number of adsorbed atoms and the speed of sound in the adsorbed film. These hitherto unobserved discontinuities point to a series of first-order layering transitions. Our results show that helium multilayers adsorbed on a nanotube are of unprecedented quality compared to previous works. They pave the way to new studies of quantized superfluid vortex dynamics on cylindrical surfaces, of the Berezinskii-Kosterlitz-Thouless phase transition in this new geometry, perhaps also to supersolidity in crystalline single layers as predicted in quantum Monte Carlo calculations.
△ Less
Submitted 29 April, 2019; v1 submitted 28 January, 2019;
originally announced January 2019.
-
Ultrasensitive Displacement Noise Measurement of Carbon Nanotube Mechanical Resonators
Authors:
S. L. de Bonis,
C. Urgell,
W. Yang,
C. Samanta,
A. Noury,
J. Vergara-Cruz,
Q. Dong,
Y. Jin,
A. Bachtold
Abstract:
Mechanical resonators based on a single carbon nanotube are exceptional sensors of mass and force. The force sensitivity in these ultra-light resonators is often limited by the noise in the detection of the vibrations. Here, we report on an ultra-sensitive scheme based on a RLC resonator and a low-temperature amplifier to detect nanotube vibrations. We also show a new fabrication process of electr…
▽ More
Mechanical resonators based on a single carbon nanotube are exceptional sensors of mass and force. The force sensitivity in these ultra-light resonators is often limited by the noise in the detection of the vibrations. Here, we report on an ultra-sensitive scheme based on a RLC resonator and a low-temperature amplifier to detect nanotube vibrations. We also show a new fabrication process of electromechanical nanotube resonators to reduce the separation between the suspended nanotube and the gate electrode down to $\sim 150$~nm. These advances in detection and fabrication allow us to reach $0.5~\mathrm{pm}/\sqrt{\mathrm{Hz}}$ displacement sensitivity. Thermal vibrations cooled cryogenically at 300~mK are detected with a signal-to-noise ratio as high as 17~dB. We demonstrate $4.3~\mathrm{zN}/\sqrt{\mathrm{Hz}}$ force sensitivity, which is the best force sensitivity achieved thus far with a mechanical resonator. Our work is an important step towards imaging individual nuclear spins and studying the coupling between mechanical vibrations and electrons in different quantum electron transport regimes.
△ Less
Submitted 30 October, 2018;
originally announced October 2018.
-
High quality factor graphene-based 2D heterostructure mechanical resonator
Authors:
M. Will,
M. Hamer,
M. Müller,
A. Noury,
P. Weber,
A. Bachtold,
R. V. Gorbachev,
C. Stampfer,
J. Güttinger
Abstract:
Ultralight mechanical resonators based on low-dimensional materials are well suited as exceptional transducers of minuscule forces or mass changes. However, the low dimensionality also provides a challenge to minimize resistive losses and heating. Here, we report on a novel approach that aims to combine different 2D materials to tackle this challenge. We fabricated a heterostructure mechanical res…
▽ More
Ultralight mechanical resonators based on low-dimensional materials are well suited as exceptional transducers of minuscule forces or mass changes. However, the low dimensionality also provides a challenge to minimize resistive losses and heating. Here, we report on a novel approach that aims to combine different 2D materials to tackle this challenge. We fabricated a heterostructure mechanical resonator consisting of few layers of niobium diselenide (NbSe$_2$) encapsulated by two graphene sheets. The hybrid membrane shows high quality factors up to 245'000 at low temperatures, comparable to the best few-layer graphene mechanical resonators. In contrast to few-layer graphene resonators, the device shows reduced electrical losses attributed to the lower resistivity of the NbSe$_2$ layer. The peculiar low temperature dependence of the intrinsic quality factor points to dissipation over two-level systems which in turn relax over the electronic system. Our high sensitivity readout is enabled by coupling the membrane to a superconducting cavity which allows for the integration of the hybrid mechanical resonator as a sensitive and low loss transducer in future quantum circuits.
△ Less
Submitted 17 September, 2018;
originally announced September 2018.
-
Improving the read-out of the resonance frequency of nanotube mechanical resonators
Authors:
Jil Schwender,
Ioannis Tsioutsios,
Alexandros Tavernarakis,
Quan Dong,
Yong Jin,
Urs Staufer,
Adrian Bachtold
Abstract:
We report on an electrical detection method of ultrasensitive carbon nanotube mechanical resonators. The noise floor of the detection method is reduced using a RLC resonator and an amplifier based on a high electron mobility transistor cooled at 4.2 K. This allows us to resolve the resonance frequency of nanotube resonators with an unprecedented quality. We show that the noise of the resonance fre…
▽ More
We report on an electrical detection method of ultrasensitive carbon nanotube mechanical resonators. The noise floor of the detection method is reduced using a RLC resonator and an amplifier based on a high electron mobility transistor cooled at 4.2 K. This allows us to resolve the resonance frequency of nanotube resonators with an unprecedented quality. We show that the noise of the resonance frequency measured at 4.2 K is limited by the resonator itself, and not by the imprecision of the measurement. The Allan deviation reaches ~10^-5 at 125 ms integration time. When comparing the integration time dependence of the Allan deviation to a power law, the exponent approaches ~1/4. The Allan deviation might be limited by the diffusion of particles over the surface of the nanotube. Our work holds promise for mass spectrometry and surface science experiments based on mechanical nano-resonators.
△ Less
Submitted 13 September, 2018;
originally announced September 2018.
-
Electrostatically induced phononic crystal
Authors:
Daiki Hatanaka,
Adrian Bachtold,
Hiroshi Yamaguchi
Abstract:
The possibility of realizing an electrostatically induced phononic crystal is investigated numerically in an acoustic waveguide based on a graphene sheet that is suspended over periodically arrayed electrodes. The application of dc voltage to these electrodes exerts electrostatic force on the graphene and this results in the periodic formation of stress in the waveguide structure in a non-invasive…
▽ More
The possibility of realizing an electrostatically induced phononic crystal is investigated numerically in an acoustic waveguide based on a graphene sheet that is suspended over periodically arrayed electrodes. The application of dc voltage to these electrodes exerts electrostatic force on the graphene and this results in the periodic formation of stress in the waveguide structure in a non-invasive way, unlike the cases with mass loading and air holes. This non-invasive scheme enables a bandgap, namely a phononic crystal, to be created in the waveguide that can be used to dynamically tune the acoustic transparency in the medium. Our approach will allow the dispersion relation to be locally modified, thus modulating the temporal response of traveling acoustic phonon waves. This novel phonon architecture is promising in terms of realizing the advanced control of phonon dynamics such as waveform and dissipation engineering in the device.
△ Less
Submitted 25 July, 2018;
originally announced July 2018.
-
Landau velocity for collective quantum Hall breakdown in bilayer graphene
Authors:
W. Yang,
H. Graef,
X. Lu,
G. Zhang,
T. Taniguchi,
K. Watanabe,
A. Bachtold,
E. H. T. Teo,
E. Baudin,
E. Bocquillon,
G. Fève,
J-M. Berroir,
D. Carpentier,
M. O. Goerbig,
B. Plaçais
Abstract:
Breakdown of the quantum Hall effect (QHE) is commonly associated with an electric field approaching the inter Landau-level (LL) Zener field, ratio of the Landau gap and cyclotron radius. Eluded in semiconducting heterostructures, in spite of extensive investigation, the intrinsic Zener limit is reported here using high-mobility bilayer graphene and high-frequency current noise. We show that colle…
▽ More
Breakdown of the quantum Hall effect (QHE) is commonly associated with an electric field approaching the inter Landau-level (LL) Zener field, ratio of the Landau gap and cyclotron radius. Eluded in semiconducting heterostructures, in spite of extensive investigation, the intrinsic Zener limit is reported here using high-mobility bilayer graphene and high-frequency current noise. We show that collective excitations arising from electron-electron interactions are essential. Beyond a noiseless ballistic QHE regime a large superpoissonian shot noise signals the breakdown via inter-LL scattering. The breakdown is ultimately limited by collective excitations in a regime where phonon and impurity scattering are quenched. The breakdown mechanism can be described by a Landau critical velocity as it bears strong similarities with the roton mechanism of superfluids.
△ Less
Submitted 15 May, 2018;
originally announced May 2018.
-
Switching off energy decay channels in nanomechanical resonators
Authors:
J. Guettinger,
A. Noury,
P. Weber,
A. M. Eriksson,
C. Lagoin,
J. Moser,
C. Eichler,
A. Wallraff,
A. Isacsson,
A. Bachtold
Abstract:
Energy decay plays a central role in a wide range of phenomena, such as optical emission, nuclear fission, and dissipation in quantum systems. Energy decay is usually described as a system leaking energy irreversibly into an environmental bath. Here, we report on energy decay measurements in nanomechanical systems based on multi-layer graphene that cannot be explained by the paradigm of a system d…
▽ More
Energy decay plays a central role in a wide range of phenomena, such as optical emission, nuclear fission, and dissipation in quantum systems. Energy decay is usually described as a system leaking energy irreversibly into an environmental bath. Here, we report on energy decay measurements in nanomechanical systems based on multi-layer graphene that cannot be explained by the paradigm of a system directly coupled to a bath. As the energy of a vibrational mode freely decays, the rate of energy decay switches abruptly to a lower value. This finding can be explained by a model where the measured mode hybridizes with other modes of the resonator at high energy. Below a threshold energy, modes are decoupled, resulting in comparatively low decay rates and giant quality factors exceeding 1 million. Our work opens up new possibilities to manipulate vibrational states, engineer hybrid states with mechanical modes at completely different frequencies, and to study the collective motion of this highly tunable system.
△ Less
Submitted 13 December, 2016;
originally announced December 2016.
-
Real-time measurement of nanotube resonator fluctuations in an electron microscope
Authors:
I. Tsioutsios,
A. Tavernarakis,
J. Osmond,
P. Verlot,
A. Bachtold
Abstract:
Mechanical resonators based on low-dimensional materials provide a unique platform for exploring a broad range of physical phenomena. The mechanical vibrational states are indeed extremely sensitive to charges, spins, photons, and adsorbed masses. However, the roadblock is often the readout of the resonator, since the detection of the vibrational states becomes increasingly difficult for smaller r…
▽ More
Mechanical resonators based on low-dimensional materials provide a unique platform for exploring a broad range of physical phenomena. The mechanical vibrational states are indeed extremely sensitive to charges, spins, photons, and adsorbed masses. However, the roadblock is often the readout of the resonator, since the detection of the vibrational states becomes increasingly difficult for smaller resonators. Here, we report an unprecedentedly sensitive method to detect nanotube resonators with effective masses in the 10^-20 kg range. We use the beam of an electron microscope to resolve the mechanical fluctuations of a nanotube in real-time for the first time. We obtain full access to the thermally-driven Brownian motion of the resonator, both in space and time domains. Our results establish the viability of carbon nanotube resonator technology at room temperature and pave the way towards the observation of novel thermodynamics regimes and quantum effects in nano-mechanics.
△ Less
Submitted 27 November, 2016;
originally announced November 2016.
-
Force sensitivity of multilayer graphene optomechanical devices
Authors:
Peter Weber,
Johannes Güttinger,
Adrien Noury,
Jorge Vergara-Cruz,
Adrian Bachtold
Abstract:
Mechanical resonators based on low-dimensional materials are promising for force and mass sensing experiments. The force sensitivity in these ultra-light resonators is often limited by the imprecision in the measurement of the vibrations, the fluctuations of the mechanical resonant frequency, and the heating induced by the measurement. Here, we strongly couple multilayer graphene resonators to sup…
▽ More
Mechanical resonators based on low-dimensional materials are promising for force and mass sensing experiments. The force sensitivity in these ultra-light resonators is often limited by the imprecision in the measurement of the vibrations, the fluctuations of the mechanical resonant frequency, and the heating induced by the measurement. Here, we strongly couple multilayer graphene resonators to superconducting cavities in order to achieve a displacement sensitivity of $1.3$ fm Hz$^{-1/2}$. This coupling also allows us to damp the resonator to an average phonon occupation of $7.2$. Our best force sensitivity, $390$ zN Hz$^{-1/2}$ with a bandwidth of $200$ Hz, is achieved by balancing measurement imprecision, optomechanical damping, and heating. Our results hold promise for studying the quantum capacitance of graphene, its magnetization, and the electron and nuclear spins of molecules adsorbed on its surface.
△ Less
Submitted 21 September, 2016;
originally announced September 2016.
-
High quality-factor mechanical resonators based on WSe2 monolayers
Authors:
Nicolas Morell,
Antoine Reserbat-Plantey,
Ioannis Tsioutsios,
Kevin G. Schädler,
François Dubin,
Frank H. L. Koppens,
Adrian Bachtold
Abstract:
Suspended monolayer transition metal-dichalcogenides (TMD) are membranes that combine ultra-low mass and exceptional optical properties, making them intriguing materials for opto-mechanical applications. However, the low measured quality factor of TMD resonators has been a roadblock so far. Here, we report an ultrasensitive optical readout of monolayer TMD resonators that allows us to reveal their…
▽ More
Suspended monolayer transition metal-dichalcogenides (TMD) are membranes that combine ultra-low mass and exceptional optical properties, making them intriguing materials for opto-mechanical applications. However, the low measured quality factor of TMD resonators has been a roadblock so far. Here, we report an ultrasensitive optical readout of monolayer TMD resonators that allows us to reveal their mechanical properties at cryogenic temperatures. We find that the quality factor of monolayer WSe2 resonators greatly increases below room temperature, reaching values as high as 1.6E^4 at liquid nitrogen temperature and 4.7E^4 at liquid helium temperature. This surpasses the quality factor of monolayer graphene resonators with similar surface areas. Upon cooling the resonator, the resonant frequency increases significantly due to the thermal contraction of the WSe2 lattice. These measurements allow us to experimentally study the thermal expansion coefficient of WSe2 monolayers for the first time. High Q-factors are also found in resonators based on MoS2 and MoSe2 monolayers. The high quality-factor found in this work opens new possibilities for coupling mechanical vibrational states to two-dimensional excitons, valley pseudospins, and single quantum emitters, and for quantum opto-mechanical experiments based on the Casimir interaction.
△ Less
Submitted 19 September, 2016;
originally announced September 2016.
-
Electro-mechanical control of an optical emitter using graphene
Authors:
Antoine Reserbat-Plantey,
Kevin G. Schädler,
Louis Gaudreau,
Gabriele Navickaite,
Johannes Güttinger,
Darrick Chang,
Costanza Toninelli,
Adrian Bachtold,
Frank H. L. Koppens
Abstract:
Active, in situ control of light at the nanoscale remains a challenge in modern physics and in nanophotonics in particular. A promising approach is to take advantage of the technological maturity of nano-electromechanical systems (NEMS) and to combine it with on-chip optics. However, in scaling down the dimensions of such integrated devices, the coupling of a NEMS to optical fields becomes challen…
▽ More
Active, in situ control of light at the nanoscale remains a challenge in modern physics and in nanophotonics in particular. A promising approach is to take advantage of the technological maturity of nano-electromechanical systems (NEMS) and to combine it with on-chip optics. However, in scaling down the dimensions of such integrated devices, the coupling of a NEMS to optical fields becomes challenging. Despite recent progress in nano-optomechanical coupling, active control of optical fields at the nanoscale has not been achieved with an on-chip NEMS thus far. Here, we show a new type of hybrid system, which consists of an on-chip graphene NEMS suspended a few tens of nanometers above nitrogen-vacancy centres (NVC), which are stable single photon emitters embedded in nano-diamonds. Electromechanical control of the photons emitted by the NVC is provided by electrostatic tuning of the graphene NEMS position, which is transduced to a modulation of NVC emission intensity. The optomechanical coupling between the graphene displacement and the NVC emission is based on near-field dipole-dipole interaction. This class of optomechanical coupling increases strongly for smaller distances, making it suitable for devices with nanoscale dimensions. These achievements hold promise for the selective control of single-emitter arrays on chip, optical spectroscopy of individual nano-objects, integrated optomechanical information processing and quantum optomechanics.
△ Less
Submitted 30 April, 2015;
originally announced April 2015.
-
Nanotube mechanical resonators with quality factors of up to 5 million
Authors:
Joel Moser,
Alexander Eichler,
Johannes Güttinger,
Mark I. Dykman,
Adrian Bachtold
Abstract:
Carbon nanotube mechanical resonators have attracted considerable interest because of their small mass, the high quality of their surface, and the pristine electronic states they host. However, their small dimensions result in fragile vibrational states that are difficult to measure. Here we observe quality factors $Q$ as high as $5\times10^6$ in ultra-clean nanotube resonators at a cryostat tempe…
▽ More
Carbon nanotube mechanical resonators have attracted considerable interest because of their small mass, the high quality of their surface, and the pristine electronic states they host. However, their small dimensions result in fragile vibrational states that are difficult to measure. Here we observe quality factors $Q$ as high as $5\times10^6$ in ultra-clean nanotube resonators at a cryostat temperature of 30 mK, where we define $Q$ as the ratio of the resonant frequency over the linewidth. Measuring such high quality factors requires both employing an ultra-low noise method to detect minuscule vibrations rapidly, and carefully reducing the noise of the electrostatic environment. We observe that the measured quality factors fluctuate because of fluctuations of the resonant frequency. The quality factors we measure are record high; they are comparable to the highest $Q$ reported in mechanical resonators of much larger size, a remarkable result considering that reducing the size of resonators is usually concomitant with decreasing quality factors. The combination of ultra-low size and very large $Q$ offers new opportunities for ultra-sensitive detection schemes and quantum optomechanical experiments.
△ Less
Submitted 31 March, 2015;
originally announced March 2015.
-
Sequential tasks performed by catalytic pumps for colloidal crystallization
Authors:
Ali Afshar Farniya,
Maria J. Esplandiu,
Adrian Bachtold
Abstract:
Gold-platinum catalytic pumps immersed in a chemical fuel are used to manipulate silica colloids. The manipulation relies on the electric field and the fluid flow generated by the pump. Catalytic pumps perform various tasks, such as the repulsion of colloids, the attraction of colloids, and the guided crystallization of colloids. We demonstrate that catalytic pumps can execute these tasks sequenti…
▽ More
Gold-platinum catalytic pumps immersed in a chemical fuel are used to manipulate silica colloids. The manipulation relies on the electric field and the fluid flow generated by the pump. Catalytic pumps perform various tasks, such as the repulsion of colloids, the attraction of colloids, and the guided crystallization of colloids. We demonstrate that catalytic pumps can execute these tasks sequentially over time. Switching from one task to the next is related to the local change of the proton concentration, which modifies the colloid zeta potential and consequently the electric force acting on the colloids.
△ Less
Submitted 20 October, 2014;
originally announced October 2014.
-
Interplay of driving and frequency noise in the spectra of vibrational systems
Authors:
Yaxing Zhang,
J. Moser,
A. Bachtold,
M. I. Dykman
Abstract:
We study the spectral effect of the fluctuations of the vibration frequency. Such fluctuations play a major role in nanomechanical and other mesoscopic vibrational systems. We find that, for periodically driven systems, the interplay of the driving and frequency fluctuations results in specific spectral features. We present measurements on a carbon nanotube resonator and show that our theory allow…
▽ More
We study the spectral effect of the fluctuations of the vibration frequency. Such fluctuations play a major role in nanomechanical and other mesoscopic vibrational systems. We find that, for periodically driven systems, the interplay of the driving and frequency fluctuations results in specific spectral features. We present measurements on a carbon nanotube resonator and show that our theory allows not only the characterization of the frequency fluctuations but also the quantification of the decay rate without ring-down measurements. The results bear on identifying the decoherence of mesoscopic oscillators and on the general problem of resonance fluorescence and light scattering by oscillators.
△ Less
Submitted 26 November, 2014; v1 submitted 5 June, 2014;
originally announced June 2014.
-
Atomic monolayer deposition on the surface of nanotube mechanical resonators
Authors:
Alexandros Tavernarakis,
Julien Chaste,
Alexander Eichler,
Gustavo Ceballos,
Maria Carmen Gordillo,
Jordi Boronat,
Adrian Bachtold
Abstract:
We studied monolayers of noble gas atoms (Xe, Kr, Ar, and Ne) deposited on individual ultra- clean suspended nanotubes. For this, we recorded the resonance frequency of the mechanical motion of the nanotube, since it provides a direct measure of the coverage. The latter is the number of adsorbed atoms divided by the number of the carbon atoms of the suspended nanotube. Monolayers formed when the t…
▽ More
We studied monolayers of noble gas atoms (Xe, Kr, Ar, and Ne) deposited on individual ultra- clean suspended nanotubes. For this, we recorded the resonance frequency of the mechanical motion of the nanotube, since it provides a direct measure of the coverage. The latter is the number of adsorbed atoms divided by the number of the carbon atoms of the suspended nanotube. Monolayers formed when the temperature was lowered in a constant pressure of noble gas atoms. The coverage of Xe monolayers remained constant at 1/6 over a large temperature range. This finding reveals that Xe monolayers are solid phases with a triangular atomic arrangement, and are commensurate with the underlying carbon nanotube. By comparing our measurements to theoretical calculations, we identify the phases of Ar and Ne monolayers as fluids, and we tentatively describe Kr monolayers as solid phases. These results underscore that mechanical resonators made from single nanotubes are excellent probes for surface science.
△ Less
Submitted 24 April, 2014; v1 submitted 23 April, 2014;
originally announced April 2014.
-
Coupling graphene mechanical resonators to superconducting microwave cavities
Authors:
P. Weber,
J. Güttinger,
I. Tsioutsios,
D. E. Chang,
A. Bachtold
Abstract:
Graphene is an attractive material for nanomechanical devices because it allows for exceptional properties, such as high frequencies and quality factors, and low mass. An outstanding challenge, however, has been to obtain large coupling between the motion and external systems for efficient readout and manipulation. Here, we report on a novel approach, in which we capacitively couple a high-Q graph…
▽ More
Graphene is an attractive material for nanomechanical devices because it allows for exceptional properties, such as high frequencies and quality factors, and low mass. An outstanding challenge, however, has been to obtain large coupling between the motion and external systems for efficient readout and manipulation. Here, we report on a novel approach, in which we capacitively couple a high-Q graphene mechanical resonator ($Q \sim 10^5$) to a superconducting microwave cavity. The initial devices exhibit a large single-photon coupling of $\sim 10$ Hz. Remarkably, we can electrostatically change the graphene equilibrium position and thereby tune the single photon coupling, the mechanical resonance frequency and the sign and magnitude of the observed Duffing nonlinearity. The strong tunability opens up new possibilities, such as the tuning of the optomechanical coupling strength on a time scale faster than the inverse of the cavity linewidth. With realistic improvements, it should be possible to enter the regime of quantum optomechanics.
△ Less
Submitted 25 April, 2014; v1 submitted 19 March, 2014;
originally announced March 2014.
-
Symmetry breaking in a mechanical resonator made from a carbon nanotube
Authors:
A. Eichler,
J. Moser,
M. I. Dykman,
A. Bachtold
Abstract:
Nanotubes behave as semi-flexible polymers in that they can bend by a sizeable amount. When integrating a nanotube in a mechanical resonator, the bending is expected to break the symmetry of the restoring potential. Here we report on a new detection method that allows us to demonstrate such symmetry breaking. The method probes the motion of the nanotube resonator at nearly zero-frequency; this mot…
▽ More
Nanotubes behave as semi-flexible polymers in that they can bend by a sizeable amount. When integrating a nanotube in a mechanical resonator, the bending is expected to break the symmetry of the restoring potential. Here we report on a new detection method that allows us to demonstrate such symmetry breaking. The method probes the motion of the nanotube resonator at nearly zero-frequency; this motion is the low-frequency counterpart of the second overtone of resonantly excited vibrations. We find that symmetry breaking leads to the spectral broadening of mechanical resonances, and to an apparent quality factor that drops below 100 at room temperature. The low quality factor at room temperature is a striking feature of nanotube resonators whose origin has remained elusive for many years. Our results shed light on the role played by symmetry breaking in the mechanics of nanotube resonators.
△ Less
Submitted 26 November, 2013;
originally announced November 2013.
-
Imaging the proton concentration and mapping the spatial distribution of the electric field of catalytic micropumps
Authors:
A. Afshar Farniya,
M. J. Esplandiu,
D. Reguera,
A. Bachtold
Abstract:
Catalytic engines can use hydrogen peroxide as a chemical fuel in order to drive motion at the microscale. The chemo-mechanical actuation is a complex mechanism based on the interrelation between catalytic reactions and electro-hydrodynamics phenomena. We studied catalytic micropumps using fluorescence confocal microscopy to image the concentration of protons in the liquid. In addition, we measure…
▽ More
Catalytic engines can use hydrogen peroxide as a chemical fuel in order to drive motion at the microscale. The chemo-mechanical actuation is a complex mechanism based on the interrelation between catalytic reactions and electro-hydrodynamics phenomena. We studied catalytic micropumps using fluorescence confocal microscopy to image the concentration of protons in the liquid. In addition, we measured the motion of particles with different charges in order to map the spatial distributions of the electric field, the electrostatic potential and the fluid flow. The combination of these two techniques allows us to contrast the gradient of the concentration of protons against the spatial variation in the electric field. We present numerical simulations that reproduce the experimental results. Our work sheds light on the interrelation between the different processes at work in the chemo-mechanical actuation of catalytic pumps. Our experimental approach could be used to study other electrochemical systems with heterogeneous electrodes.
△ Less
Submitted 13 November, 2013;
originally announced November 2013.
-
Controlled assembly of graphene sheets and nanotubes: fabrication of suspended multi-element all-carbon vibrational structures
Authors:
I. Tsioutsios,
J. Moser,
J. A. Plaza,
A. Bachtold
Abstract:
We report on the fabrication and operation of a multi-element vibrational structure consisting of two graphene mechanical resonators coupled by a nanotube beam. The whole structure is suspended. Each graphene resonator is clamped by two metal electrodes. The structure is fabricated using a combination of electron-beam lithography and atomic-force microscopy nano-manipulation. This layout allows us…
▽ More
We report on the fabrication and operation of a multi-element vibrational structure consisting of two graphene mechanical resonators coupled by a nanotube beam. The whole structure is suspended. Each graphene resonator is clamped by two metal electrodes. The structure is fabricated using a combination of electron-beam lithography and atomic-force microscopy nano-manipulation. This layout allows us to detect the mechanical vibrations electrically. The measured eigenmodes are localized in either one of the graphene resonators. The coupling due to the nanotube is studied by measuring the shift of the resonance frequency of one graphene resonator as a function of the vibration amplitude of the other resonator. Coupled graphene resonators hold promise for the study of nonlinear dynamics, the manipulation of mechanical states, and quantum non-demolition measurements.
△ Less
Submitted 19 October, 2013;
originally announced October 2013.
-
Ultrasensitive force detection with a nanotube mechanical resonator
Authors:
J. Moser,
J. Guttinger,
A. Eichler,
M. J. Esplandiu,
D. E. Liu,
M. I. Dykman,
A. Bachtold
Abstract:
Since the advent of atomic force microscopy, mechanical resonators have been used to study a wide variety of phenomena, such as the dynamics of individual electron spins, persistent currents in normal metal rings, and the Casimir force. Key to these experiments is the ability to measure weak forces. Here, we report on force sensing experiments with a sensitivity of 12 zN Hz^(-1/2) at a temperature…
▽ More
Since the advent of atomic force microscopy, mechanical resonators have been used to study a wide variety of phenomena, such as the dynamics of individual electron spins, persistent currents in normal metal rings, and the Casimir force. Key to these experiments is the ability to measure weak forces. Here, we report on force sensing experiments with a sensitivity of 12 zN Hz^(-1/2) at a temperature of 1.2 K using a resonator made of a carbon nanotube. An ultra-sensitive method based on cross-correlated electrical noise measurements, in combination with parametric downconversion, is used to detect the low-amplitude vibrations of the nanotube induced by weak forces. The force sensitivity is quantified by applying a known capacitive force. This detection method also allows us to measure the Brownian vibrations of the nanotube down to cryogenic temperatures. Force sensing with nanotube resonators offers new opportunities for detecting and manipulating individual nuclear spins as well as for magnetometry measurements.
△ Less
Submitted 29 May, 2013;
originally announced May 2013.
-
Harnessing vacuum forces for quantum sensing of graphene motion
Authors:
Christine A. Muschik,
Simon Moulieras,
Adrian Bachtold,
Maciej Lewenstein,
Frank Koppens,
Darrick Chang
Abstract:
Position measurements at the quantum level are vital for many applications, but also challenging. Typically, methods based on optical phase shifts are used, but these methods are often weak and difficult to apply to many materials. An important example is graphene, which is an excellent mechanical resonator due to its small mass and an outstanding platform for nanotechnologies, but is largely tran…
▽ More
Position measurements at the quantum level are vital for many applications, but also challenging. Typically, methods based on optical phase shifts are used, but these methods are often weak and difficult to apply to many materials. An important example is graphene, which is an excellent mechanical resonator due to its small mass and an outstanding platform for nanotechnologies, but is largely transparent. Here, we present a novel detection scheme based upon the strong, dispersive vacuum interactions between a graphene sheet and a quantum emitter. In particular, the mechanical displacement causes strong changes in the vacuum-induced shifts of the transition frequency of the emitter, which can be read out via optical fields. We show that this enables strong quantum squeezing of the graphene position on time scales short compared to the mechanical period.
△ Less
Submitted 26 May, 2014; v1 submitted 30 April, 2013;
originally announced April 2013.
-
High-frequency nanotube mechanical resonators
Authors:
J. Chaste,
M. Sledzinska,
M. Zdrojek,
J. Moser,
A. Bachtold
Abstract:
We report on a simple method to fabricate high-frequency nanotube mechanical resonators reproducibly. We measure resonance frequencies as high as 4.2 GHz for the fundamental eigenmode and 11 GHz for higher order eigenmodes. The high-frequency resonances are achieved using short suspended nanotubes and by introducing tensile stress in the nanotube. These devices allow us to determine the coefficien…
▽ More
We report on a simple method to fabricate high-frequency nanotube mechanical resonators reproducibly. We measure resonance frequencies as high as 4.2 GHz for the fundamental eigenmode and 11 GHz for higher order eigenmodes. The high-frequency resonances are achieved using short suspended nanotubes and by introducing tensile stress in the nanotube. These devices allow us to determine the coefficient of the thermal expansion of an individual nanotube, which is negative and is about -0.7E-5 1/K at room temperature. High-frequency resonators made of nanotubes hold promise for mass sensing and experiments in the quantum limit.
△ Less
Submitted 20 July, 2012;
originally announced July 2012.
-
Strong coupling between mechanical modes in a nanotube resonator
Authors:
A. Eichler,
M. del Álamo Ruiz,
J. A. Plaza,
A. Bachtold
Abstract:
We report on the nonlinear coupling between the mechanical modes of a nanotube resonator. The coupling is revealed in a pump-probe experiment where a mode driven by a pump force is shown to modify the motion of a second mode measured with a probe force. In a second series of experiments, we actuate the resonator with only one oscillating force. Mechanical resonances feature exotic lineshapes with…
▽ More
We report on the nonlinear coupling between the mechanical modes of a nanotube resonator. The coupling is revealed in a pump-probe experiment where a mode driven by a pump force is shown to modify the motion of a second mode measured with a probe force. In a second series of experiments, we actuate the resonator with only one oscillating force. Mechanical resonances feature exotic lineshapes with reproducible dips, peaks, and jumps when the measured mode is commensurate with another mode with a frequency ratio of either 2 or 3. Conventional lineshapes are recovered by detuning the frequency ratio using the voltage on a nearby gate electrode. The exotic lineshapes are attributed to strong coupling between the mechanical modes. The possibility to control the strength of the coupling with the gate voltage holds promise for various experiments, such as quantum manipulation, mechanical signal processing, and the study of the quantum-toclassical transition.
△ Less
Submitted 25 June, 2012;
originally announced June 2012.
-
A Mechanical Mass Sensor with Yoctogram Resolution
Authors:
J. Chaste,
A. Eichler,
J. Moser,
G. Ceballos,
R. Rurali,
A. Bachtold
Abstract:
Nanoelectromechanical systems (NEMS) have generated considerable interest as inertial mass sensors. NEMS resonators have been used to weigh cells, biomolecules, and gas molecules, creating many new possibilities for biological and chemical analysis [1-4]. Recently, NEMS-based mass sensors have been employed as a new tool in surface science in order to study e.g. the phase transitions or the diffus…
▽ More
Nanoelectromechanical systems (NEMS) have generated considerable interest as inertial mass sensors. NEMS resonators have been used to weigh cells, biomolecules, and gas molecules, creating many new possibilities for biological and chemical analysis [1-4]. Recently, NEMS-based mass sensors have been employed as a new tool in surface science in order to study e.g. the phase transitions or the diffusion of adsorbed atoms on nanoscale objects [5-7]. A key point in all these experiments is the ability to resolve small masses. Here we report on mass sensing experiments with a resolution of 1.7 yg (1 yg = 10^-24 g), which corresponds to the mass of one proton, or one hydrogen atom. The resonator is made of a ~150 nm long carbon nanotube resonator vibrating at nearly 2 GHz. The unprecedented level of sensitivity allows us to detect adsorption events of naphthalene molecules (C10H8) and to measure the binding energy of a Xe atom on the nanotube surface (131 meV). These ultrasensitive nanotube resonators offer new opportunities for mass spectrometry, magnetometry, and adsorption experiments.
△ Less
Submitted 12 April, 2012;
originally announced April 2012.
-
Parametric amplification and self-oscillation in a nanotube mechanical resonator
Authors:
Alexander Eichler,
Julien Chaste,
Joel Moser,
Adrian Bachtold
Abstract:
A hallmark of mechanical resonators made from a single nanotube is that the resonance frequency can be widely tuned. Here, we take advantage of this property to realize parametric amplification and self-oscillation. The gain of the parametric amplification can be as high as 18.2 dB and tends to saturate at high parametric pumping due to nonlinear damping. These measurements allow us to determine t…
▽ More
A hallmark of mechanical resonators made from a single nanotube is that the resonance frequency can be widely tuned. Here, we take advantage of this property to realize parametric amplification and self-oscillation. The gain of the parametric amplification can be as high as 18.2 dB and tends to saturate at high parametric pumping due to nonlinear damping. These measurements allow us to determine the coefficient of the linear damping force. The corresponding damping rate is lower than the one obtained from the lineshape of the resonance (without pumping), supporting the recently reported scenario that describes damping in nanotube resonators by a nonlinear force. The possibility to combine nanotube resonant mechanics and parametric amplification holds promise for future ultra-low force sensing experiments.
△ Less
Submitted 31 January, 2012;
originally announced January 2012.
-
Dissipative and conservative nonlinearity in carbon nanotube and graphene mechanical resonators
Authors:
J. Moser,
A. Eichler,
B. Lassagne,
J. Chaste,
Y. Tarakanov,
J. Kinaret,
I. Wilson-Rae,
A. Bachtold
Abstract:
Graphene and carbon nanotubes represent the ultimate size limit of one and two-dimensional nanoelectromechanical resonators. Because of their reduced dimensionality, graphene and carbon nanotubes display unusual mechanical behavior; in particular, their dynamics is highly nonlinear. Here, we review several types of nonlinear behavior in resonators made from nanotubes and graphene. We first discuss…
▽ More
Graphene and carbon nanotubes represent the ultimate size limit of one and two-dimensional nanoelectromechanical resonators. Because of their reduced dimensionality, graphene and carbon nanotubes display unusual mechanical behavior; in particular, their dynamics is highly nonlinear. Here, we review several types of nonlinear behavior in resonators made from nanotubes and graphene. We first discuss an unprecedented scenario where damping is described by a nonlinear force. This scenario is supported by several experimental facts: (i) the quality factor varies with the amplitude of the motion as a power law whose exponent coincides with the value predicted by the nonlinear damping model, (ii) hysteretic behavior (of the motional amplitude as a function of driving frequency) is absent in some of our resonators even for large driving forces, as expected when nonlinear damping forces are large, and (iii) when we quantify the linear damping force (by performing parametric excitation measurements) we find that it is significantly smaller than the nonlinear damping force. We then review parametric excitation measurements, an alternative actuation method which is based on nonlinear dynamics. Finally, we discuss experiments where the mechanical motion is coupled to electron transport through a nanotube. The coupling can be made so strong that the associated force acting on the nanotube becomes highly nonlinear with displacement and velocity. Overall, graphene and nanotube resonators hold promise for future studies on classical and quantum nonlinear dynamics.
△ Less
Submitted 6 October, 2011;
originally announced October 2011.
-
Nonlinear damping in mechanical resonators based on graphene and carbon nanotubes
Authors:
A. Eichler,
J. Moser,
J. Chaste,
M. Zdrojek,
I. Wilson-Rae,
A. Bachtold
Abstract:
Carbon nanotubes and graphene allow fabricating outstanding nanomechanical resonators. They hold promise for various scientific and technological applications, including sensing of mass, force, and charge, as well as the study of quantum phenomena at the mesoscopic scale. Here, we have discovered that the dynamics of nanotube and graphene resonators is in fact highly exotic. We propose an unpreced…
▽ More
Carbon nanotubes and graphene allow fabricating outstanding nanomechanical resonators. They hold promise for various scientific and technological applications, including sensing of mass, force, and charge, as well as the study of quantum phenomena at the mesoscopic scale. Here, we have discovered that the dynamics of nanotube and graphene resonators is in fact highly exotic. We propose an unprecedented scenario where mechanical dissipation is entirely determined by nonlinear damping. As a striking consequence, the quality factor Q strongly depends on the amplitude of the motion. This scenario is radically different from that of other resonators, whose dissipation is dominated by a linear damping term. We believe that the difference stems from the reduced dimensionality of carbon nanotubes and graphene. Besides, we exploit the nonlinear nature of the damping to improve the figure of merit of nanotube/graphene resonators.
△ Less
Submitted 9 March, 2011;
originally announced March 2011.
-
Probing the electron-phonon coupling in ozone-doped graphene by Raman spectroscopy
Authors:
F. Alzina,
H. Tao,
J. Moser,
Y. Garcia,
A. Bachtold,
C. M. Sotomayor-Torres
Abstract:
We have investigated the effects of ozone treatment on graphene by Raman scattering. Sequential ozone short-exposure cycles resulted in increasing the $p$ doping levels as inferred from the blue shift of the 2$D$ and $G$ peak frequencies, without introducing significant disorder. The two-phonon 2$D$ and 2$D'$ Raman peak intensities show a significant decrease, while, on the contrary, the one-phono…
▽ More
We have investigated the effects of ozone treatment on graphene by Raman scattering. Sequential ozone short-exposure cycles resulted in increasing the $p$ doping levels as inferred from the blue shift of the 2$D$ and $G$ peak frequencies, without introducing significant disorder. The two-phonon 2$D$ and 2$D'$ Raman peak intensities show a significant decrease, while, on the contrary, the one-phonon G Raman peak intensity remains constant for the whole exposure process. The former reflects the dynamics of the photoexcited electrons (holes) and, specifically, the increase of the electron-electron scattering rate with doping. From the ratio of 2$D$ to 2$D$ intensities, which remains constant with doping, we could extract the ratio of electron-phonon coupling parameters. This ratio is found independent on the number of layers up to ten layers. Moreover, the rate of decrease of 2$D$ and 2$D'$ intensities with doping was found to slowdown inversely proportional to the number of graphene layers, revealing the increase of the electron-electron collision probability.
△ Less
Submitted 13 May, 2010;
originally announced May 2010.
-
Ground-state cooling the vibrations of suspended carbon-nanotubes with constant electron current
Authors:
Stefano Zippilli,
Adrian Bachtold,
Giovanna Morigi
Abstract:
We investigate the efficiency of cooling the vibrations of a nano-mechanical resonator, constituted by a partially suspended Carbon-nanotube and operating as double-quantum dot. The motion is brought to lower temperatures by tailoring the energy exchange via electromechanical coupling with single electrons, constantly flowing through the nanotube when a constant potential difference is applied at…
▽ More
We investigate the efficiency of cooling the vibrations of a nano-mechanical resonator, constituted by a partially suspended Carbon-nanotube and operating as double-quantum dot. The motion is brought to lower temperatures by tailoring the energy exchange via electromechanical coupling with single electrons, constantly flowing through the nanotube when a constant potential difference is applied at its extremes in the Coulomb-blockade regime. Ground-state cooling is possible at sufficiently high quality factors, provided that the dephasing rate of electron transport within the double dot does not exceed the resonator frequency. For large values of the dephasing rates cooling can still be achieved by appropriately setting the tunable parameters.
△ Less
Submitted 19 March, 2010;
originally announced March 2010.
-
Current-voltage characteristics of graphene devices: interplay between Zener-Klein tunneling and defects
Authors:
Niels Vandecasteele,
Amelia Barreiro,
Michele Lazzeri,
Adrian Bachtold,
Francesco Mauri
Abstract:
We report a theoretical/experimental study of current-voltage characteristics (I-V) of graphene devices near the Dirac point. The I-V can be described by a power law (I \propto V^α, with 1< α<= 1.5). The exponent is higher when the mobility is lower. This superlinear I-V is interpreted in terms of the interplay between Zener-Klein transport, that is tunneling between different energy bands, and d…
▽ More
We report a theoretical/experimental study of current-voltage characteristics (I-V) of graphene devices near the Dirac point. The I-V can be described by a power law (I \propto V^α, with 1< α<= 1.5). The exponent is higher when the mobility is lower. This superlinear I-V is interpreted in terms of the interplay between Zener-Klein transport, that is tunneling between different energy bands, and defect scattering. Surprisingly, the Zener-Klein tunneling is made visible by the presence of defects.
△ Less
Submitted 10 March, 2010;
originally announced March 2010.
-
Magneto-transport in Disordered Graphene: from Weak Localization to Strong Localization
Authors:
J. Moser,
H. Tao,
S. Roche,
F. Alsina,
C. M. Sotomayor Torres,
A. Bachtold
Abstract:
We present a magneto-transport study of graphene samples into which a mild disorder was introduced by exposure to ozone. Unlike the conductivity of pristine graphene, the conductivity of graphene samples exposed to ozone becomes very sensitive to temperature: it decreases by more than 3 orders of magnitude between 100K and 1K. By varying either an external gate voltage or temperature, we continu…
▽ More
We present a magneto-transport study of graphene samples into which a mild disorder was introduced by exposure to ozone. Unlike the conductivity of pristine graphene, the conductivity of graphene samples exposed to ozone becomes very sensitive to temperature: it decreases by more than 3 orders of magnitude between 100K and 1K. By varying either an external gate voltage or temperature, we continuously tune the transport properties from the weak to the strong localization regime. We show that the transition occurs as the phase coherence length becomes comparable to the localization length. We also highlight the important role of disorder-enhanced electron-electron interaction on the resistivity.
△ Less
Submitted 5 March, 2010;
originally announced March 2010.
-
Fabrication of large addition energy quantum dots in graphene
Authors:
Joel Moser,
Adrian Bachtold
Abstract:
We present a simple technique to fabricate graphene quantum dots in a cryostat. It relies upon the controlled rupture of a suspended graphene sheet subjected to the application of a large electron current. This results in the in-situ formation of a clean and ultra-narrow constriction, which hosts one quantum dot, and occasionally a few quantum dots in series. Conductance spectroscopy indicates t…
▽ More
We present a simple technique to fabricate graphene quantum dots in a cryostat. It relies upon the controlled rupture of a suspended graphene sheet subjected to the application of a large electron current. This results in the in-situ formation of a clean and ultra-narrow constriction, which hosts one quantum dot, and occasionally a few quantum dots in series. Conductance spectroscopy indicates that individual quantum dots can possess an addition energy as large as 180 meV and a level spacing as large as 25 meV. Our technique has several assets: (i) the dot is suspended, thus the electrostatic influence of the substrate is reduced, and (ii) contamination is minimized, since the edges of the dot have only been exposed to the vacuum in the cryostat.
△ Less
Submitted 6 October, 2009; v1 submitted 17 September, 2009;
originally announced September 2009.
-
Transport properties of graphene in the high-current limit
Authors:
Amelia Barreiro,
Michele Lazzeri,
Joel Moser,
Francesco Mauri,
Adrian Bachtold
Abstract:
We present a detailed study of the high-current transport properties of graphene devices patterned in a four-point configuration. The current tends to saturate as the voltage across graphene is increased but never reaches the complete saturation as in metallic nanotubes. Measurements are compared to a model based on the Boltzmann equation, which includes electron scattering processes due to char…
▽ More
We present a detailed study of the high-current transport properties of graphene devices patterned in a four-point configuration. The current tends to saturate as the voltage across graphene is increased but never reaches the complete saturation as in metallic nanotubes. Measurements are compared to a model based on the Boltzmann equation, which includes electron scattering processes due to charged and neutral impurities, and graphene optical-phonons. The saturation is incomplete because of the competition between disorder and optical-phonon scattering.
△ Less
Submitted 31 May, 2009;
originally announced June 2009.