-
Stacking fault segregation imaging with analytical field ion microscopy
Authors:
F. F. Morgado,
L. T. Stephenson,
S. Bhatt,
C. Freysoldt,
S. Neumeier,
S. Katnagallu,
A. P. A. Subramanyam,
I. Pietka,
T. Hammerschmidt,
F. Vurpillot,
B. Gault
Abstract:
Stacking faults (SF) are important structural defects that play an essential role in the deformation of engineering alloys. However, direct observation of stacking faults at the atomic scale can be challenging. Here, we use the analytical field ion microscopy (aFIM), including density-functional theory informed contrast estimation, to image local elemental segregation at SFs in a creep-deformed so…
▽ More
Stacking faults (SF) are important structural defects that play an essential role in the deformation of engineering alloys. However, direct observation of stacking faults at the atomic scale can be challenging. Here, we use the analytical field ion microscopy (aFIM), including density-functional theory informed contrast estimation, to image local elemental segregation at SFs in a creep-deformed solid solution single crystal alloy of Ni-2 at.% W. The segregated atoms are imaged brightly, and time-of-flight spectrometry allows for their identification as W. We also provide the first quantitative analysis of trajectory aberration, with a deviation of approximately 0.4 nm, explaining why atom probe tomography could not resolve these segregations. Atomistic simulations of substitutional W atoms at an edge dislocation in fcc Ni using an analytic bond-order potential indicate that the experimentally observed segregation is due to the energetic preference of W for the center of the stacking fault, contrasting with e.g., Re segregating to partial dislocations. Solute segregation to SF can hinder dislocation motion, increasing the strength of Ni-based superalloys. Yet direct substitution of Re by W envisaged to lower superalloys' costs, requires extra consideration in alloy design since these two solutes do not have comparable interactions with structural defects during deformation.
△ Less
Submitted 6 August, 2024;
originally announced August 2024.
-
Grain boundaries control lithiation of solid solution substrates in lithium metal batteries
Authors:
Leonardo Shoji Aota,
Chanwon Jung,
Siyuan Zhang,
Ömer K. Büyükuslu,
Poonam Yadav,
Mahander Pratap Singh,
Xinren Chen,
Eric Woods,
Christina Scheu,
Se-Ho Kim,
Dierk Raabe,
Baptiste Gault
Abstract:
The development of sustainable transportation and communication systems requires an increase in both energy density and capacity retention of Li-batteries. Using substrates forming a solid solution with body centered cubic Li enhances the cycle stability of anode-less batteries. However, it remains unclear how the substrate microstructure affects the lithiation behavior. Here, we deploy a correlat…
▽ More
The development of sustainable transportation and communication systems requires an increase in both energy density and capacity retention of Li-batteries. Using substrates forming a solid solution with body centered cubic Li enhances the cycle stability of anode-less batteries. However, it remains unclear how the substrate microstructure affects the lithiation behavior. Here, we deploy a correlative, near-atomic scale probing approach through combined ion- and electron-microscopy to examine the distribution of Li in Li-Ag diffusion couples as model system. We reveal that Li regions with over 93.8% at.% nucleate within Ag at random high angle grain boundaries, whereas grain interiors are not lithiated. We evidence the role of kinetics and mechanical constraint from the microstructure over equilibrium thermodynamics in dictating the lithiation process. The findings suggest that grain size and grain boundary character are critical to enhance the electrochemical performance of interlayers/electrodes, particularly for improving lithiation kinetics and hence reducing dendrite formation.
△ Less
Submitted 12 July, 2024;
originally announced July 2024.
-
Segregation at prior austenite grain boundaries: the competition between boron and hydrogen
Authors:
Guillaume Hachet,
Ali Tehranchi,
Hao Shi,
Manoj Prabhakar,
Shaolou Wei,
Katja Angenendt,
Stefan Zaefferer,
Baptiste Gault,
Binhan Sun,
Dirk Ponge,
Dierk Raabe
Abstract:
The interaction between boron and hydrogen at grain boundaries has been investigated experimentally and numerically in boron-doped and boron-free martensitic steels using thermal desorption spectrometry (TDS) and ab initio calculations. The calculations show that boron, which mostly segregates into prior austenite grain boundaries (PAGBs), repels hydrogen. This behavior has also been observed usin…
▽ More
The interaction between boron and hydrogen at grain boundaries has been investigated experimentally and numerically in boron-doped and boron-free martensitic steels using thermal desorption spectrometry (TDS) and ab initio calculations. The calculations show that boron, which mostly segregates into prior austenite grain boundaries (PAGBs), repels hydrogen. This behavior has also been observed using TDS measurements, with the disappearance of one peak when boron is incorporated into the microstructure. Additionally, the microstructure of both boron-doped and boron-free steels has been studied through electron backscattered diffraction, electron channeling contrast imaging, synchrotron X-ray measurements, and atom probe tomography. While both steels have a similar grain size, grain boundary distribution, and dislocation densities, pronounced boron segregation into PAGBs is observed for boron-doped steels. Therefore, the equilibrium hydrogen concentration in different trapping sites has been evaluated using the Langmuir-McLean approximation. This thermodynamic model shows that the distribution of hydrogen is identical for all traps when the total hydrogen concentration is low for boron-free steel. However, when it increases, traps of the lowest segregation energies (mostly PAGBs) are firstly saturated, which promotes failure initiation at this defect type. This finding partially explains why PAGBs are the weakest microstructure feature when martensitic steels are exposed to hydrogen-containing environments.
△ Less
Submitted 4 July, 2024;
originally announced July 2024.
-
Towards establishing best practice in the analysis of hydrogen and deuterium by atom probe tomography
Authors:
Baptiste Gault,
Aparna Saksena,
Xavier Sauvage,
Paul Bagot,
Leonardo S. Aota,
Jonas Arlt,
Lisa T. Belkacemi,
Torben Boll,
Yi-Sheng Chen,
Luke Daly,
Milos B. Djukic,
James O. Douglas,
Maria J. Duarte,
Peter J. Felfer,
Richard G. Forbes,
Jing Fu,
Hazel M. Gardner,
Ryota Gemma,
Stephan S. A. Gerstl,
Yilun Gong,
Guillaume Hachet,
Severin Jakob,
Benjamin M. Jenkins,
Megan E. Jones,
Heena Khanchandani
, et al. (20 additional authors not shown)
Abstract:
As hydrogen is touted as a key player in the decarbonization of modern society, it is critical to enable quantitative H analysis at high spatial resolution, if possible at the atomic scale. Indeed, H has a known deleterious impact on the mechanical properties (strength, ductility, toughness) of most materials that can hinder their use as part of the infrastructure of a hydrogen-based economy. Enab…
▽ More
As hydrogen is touted as a key player in the decarbonization of modern society, it is critical to enable quantitative H analysis at high spatial resolution, if possible at the atomic scale. Indeed, H has a known deleterious impact on the mechanical properties (strength, ductility, toughness) of most materials that can hinder their use as part of the infrastructure of a hydrogen-based economy. Enabling H mapping, including local hydrogen concentration analyses at specific microstructural features, is essential for understanding the multiple ways that H affect the properties of materials, including for instance embrittlement mechanisms and their synergies, but also spatial mapping and quantification of hydrogen isotopes is essential to accurately predict tritium inventory of future fusion power plants, ensuring their safe and efficient operation for example. Atom probe tomography (APT) has the intrinsic capabilities for detecting hydrogen (H), and deuterium (D), and in principle the capacity for performing quantitative mapping of H within a material's microstructure. Yet the accuracy and precision of H analysis by APT remain affected by the influence of residual hydrogen from the ultra-high vacuum chamber that can obscure the signal of H from within the material, along with a complex field evaporation behavior. The present article reports the essence of discussions at a focused workshop held at the Max-Planck Institute for Sustainable Materials in April 2024. The workshop was organized to pave the way to establishing best practices in reporting APT data for the analysis of H. We first summarize the key aspects of the intricacies of H analysis by APT and propose a path for better reporting of the relevant data to support interpretation of APT-based H analysis in materials.
△ Less
Submitted 21 May, 2024;
originally announced May 2024.
-
3D deep learning for enhanced atom probe tomography analysis of nanoscale microstructures
Authors:
Jiwei Yu,
Zhangwei Wang,
Aparna Saksena,
Shaolou Wei,
Ye Wei,
Timoteo Colnaghi,
Andreas Marek,
Markus Rampp,
Min Song,
Baptiste Gault,
Yue Li
Abstract:
Quantitative analysis of microstructural features on the nanoscale, including precipitates, local chemical orderings (LCOs) or structural defects (e.g. stacking faults) plays a pivotal role in understanding the mechanical and physical responses of engineering materials. Atom probe tomography (APT), known for its exceptional combination of chemical sensitivity and sub-nanometer resolution, primaril…
▽ More
Quantitative analysis of microstructural features on the nanoscale, including precipitates, local chemical orderings (LCOs) or structural defects (e.g. stacking faults) plays a pivotal role in understanding the mechanical and physical responses of engineering materials. Atom probe tomography (APT), known for its exceptional combination of chemical sensitivity and sub-nanometer resolution, primarily identifies microstructures through compositional segregations. However, this fails when there is no significant segregation, as can be the case for LCOs and stacking faults. Here, we introduce a 3D deep learning approach, AtomNet, designed to process APT point cloud data at the single-atom level for nanoscale microstructure extraction, simultaneously considering compositional and structural information. AtomNet is showcased in segmenting L12-type nanoprecipitates from the matrix in an AlLiMg alloy, irrespective of crystallographic orientations, which outperforms previous methods. AtomNet also allows for 3D imaging of L10-type LCOs in an AuCu alloy, a challenging task for conventional analysis due to their small size and subtle compositional differences. Finally, we demonstrate the use of AtomNet for revealing 2D stacking faults in a Co-based superalloy, without any defected training data, expanding the capabilities of APT for automated exploration of hidden microstructures. AtomNet pushes the boundaries of APT analysis, and holds promise in establishing precise quantitative microstructure-property relationships across a diverse range of metallic materials.
△ Less
Submitted 25 April, 2024;
originally announced April 2024.
-
Crystallographic dependence of Field Evaporation Energy Barrier in metals using Field Evaporation Energy Loss Spectroscopy mapping
Authors:
François Vurpillot,
Constantinos Hatzoglou,
Benjamin Klaes,
Loic Rousseau,
Jean-Baptiste Maillet,
Ivan Blum,
Baptiste Gault,
Alfred Cerezo
Abstract:
Atom probe tomography data is composed of a list of coordinates of the reconstructed atoms in the probed volume. The elemental identity of each atom is derived from time-of-flight mass spectrometry, with no local energetic or chemical information readily available within the mass spectrum. Here, we used a new data processing technique referred to as field evaporation energy loss spectroscopy (FEEL…
▽ More
Atom probe tomography data is composed of a list of coordinates of the reconstructed atoms in the probed volume. The elemental identity of each atom is derived from time-of-flight mass spectrometry, with no local energetic or chemical information readily available within the mass spectrum. Here, we used a new data processing technique referred to as field evaporation energy loss spectroscopy (FEELS), which analyses the tails of mass peaks. FEELS was used to extract critical energetic parameters that characterize the field evaporation process, which are related to the binding energy of atoms to the surface under intense electrostatic field and dependent of the path followed by the departing atoms during the field evaporation process. We focused our study on different pure face centered cubic metals (Al, Ni, Rh). We demonstrate that the energetic parameters extracted from mass spectra can be mapped in 2D with nanometric resolution. A dependence on the considered crystallographic planes is observed, with sets of planes of low Miller indices showing a lower sensitivity to the intensity of the electric field, which indicates a lower effective attachment energy. The temperature is also an important parameter in particular for Al, which we attribute to an energetic transition between two paths of field evaporation between 25K and 60K close to (002) pole at the specimen's surface. This paper shows that the complex information that can be retrieved from the measured energy loss of surface atoms is important both instrumentally and fundamentally.
△ Less
Submitted 3 April, 2024;
originally announced April 2024.
-
Impurities, or dopants, that is the question
Authors:
Baptiste Gault,
Leonardo Shoji Aota,
Mathias Krämer,
Se-Ho Kim
Abstract:
The numerous stories around LK-99 as a possible room-temperature superconductor over the summer of 2023 epitomise that materials are more than a bulk crystallographic structure or an expected composition. Like all materials, those at the core of technologies for the energy generation transition, including batteries, catalysts or quantum materials draw their properties from a hierarchy of microstru…
▽ More
The numerous stories around LK-99 as a possible room-temperature superconductor over the summer of 2023 epitomise that materials are more than a bulk crystallographic structure or an expected composition. Like all materials, those at the core of technologies for the energy generation transition, including batteries, catalysts or quantum materials draw their properties from a hierarchy of microstructural features where impurities can dramatically influence the outcomes. As we move towards a circular economy, the recycling of materials will inevitably create fluxes of increasingly impure materials, generating new challenges for fabricating materials with controlled properties. Here, we provide our perspective on how high-end microscopy and microanalysis have helped us to understand relationships between synthesis, processing and microstructure, avoiding imprecise or even erroneous interpretations on the origins of the properties from a range of materials. We highlight examples of how unexpected impurities and their spatial distribution on the nanoscale can be turned into an advantage to define pathways for synthesis of materials with new and novel sets of physical properties.
△ Less
Submitted 6 March, 2024;
originally announced March 2024.
-
Roadmap on Data-Centric Materials Science
Authors:
Stefan Bauer,
Peter Benner,
Tristan Bereau,
Volker Blum,
Mario Boley,
Christian Carbogno,
C. Richard A. Catlow,
Gerhard Dehm,
Sebastian Eibl,
Ralph Ernstorfer,
Ádám Fekete,
Lucas Foppa,
Peter Fratzl,
Christoph Freysoldt,
Baptiste Gault,
Luca M. Ghiringhelli,
Sajal K. Giri,
Anton Gladyshev,
Pawan Goyal,
Jason Hattrick-Simpers,
Lara Kabalan,
Petr Karpov,
Mohammad S. Khorrami,
Christoph Koch,
Sebastian Kokott
, et al. (36 additional authors not shown)
Abstract:
Science is and always has been based on data, but the terms "data-centric" and the "4th paradigm of" materials research indicate a radical change in how information is retrieved, handled and research is performed. It signifies a transformative shift towards managing vast data collections, digital repositories, and innovative data analytics methods. The integration of Artificial Intelligence (AI) a…
▽ More
Science is and always has been based on data, but the terms "data-centric" and the "4th paradigm of" materials research indicate a radical change in how information is retrieved, handled and research is performed. It signifies a transformative shift towards managing vast data collections, digital repositories, and innovative data analytics methods. The integration of Artificial Intelligence (AI) and its subset Machine Learning (ML), has become pivotal in addressing all these challenges. This Roadmap on Data-Centric Materials Science explores fundamental concepts and methodologies, illustrating diverse applications in electronic-structure theory, soft matter theory, microstructure research, and experimental techniques like photoemission, atom probe tomography, and electron microscopy. While the roadmap delves into specific areas within the broad interdisciplinary field of materials science, the provided examples elucidate key concepts applicable to a wider range of topics. The discussed instances offer insights into addressing the multifaceted challenges encountered in contemporary materials research.
△ Less
Submitted 1 May, 2024; v1 submitted 1 February, 2024;
originally announced February 2024.
-
Analysis of water ice in nanoporous copper needles using cryo atom probe tomography
Authors:
Levi Tegg,
Ingrid E. McCarroll,
Se-Ho Kim,
Renelle Dubosq,
Eric V. Woods,
Ayman A. El-Zoka,
Baptiste Gault,
Julie M. Cairney
Abstract:
The application of atom probe tomography (APT) to frozen liquids is limited by difficulties in specimen preparation. Here, we report on the use of nanoporous Cu needles as a physical framework to hold water ice for investigation using APT. Nanoporous Cu needles are prepared by the electropolishing and dealloying of Cu-Mn matchstick precursors. Cryogenic scanning electron microscopy and focused-ion…
▽ More
The application of atom probe tomography (APT) to frozen liquids is limited by difficulties in specimen preparation. Here, we report on the use of nanoporous Cu needles as a physical framework to hold water ice for investigation using APT. Nanoporous Cu needles are prepared by the electropolishing and dealloying of Cu-Mn matchstick precursors. Cryogenic scanning electron microscopy and focused-ion beam milling reveal a hierarchical, dendritic, highly-wettable microstructure. The atom probe mass spectrum is dominated by peaks of Cu+ and H(H2O)n+ up to n <= 3, and the reconstructed volume shows the protrusion of a Cu ligament into an ice-filled pore. The continuous Cu ligament network electrically connects the apex to the cryostage, leading to enhanced electric field at the apex and increased cooling, both of which simplify the mass spectrum compared to previous reports.
△ Less
Submitted 7 February, 2024;
originally announced February 2024.
-
Understanding atom probe's analytical performance for iron oxides using correlation histograms and ab initio calculations
Authors:
Se-Ho Kim,
Shalini Bhatt,
Daniel K. Schreiber,
Jörg Neugebauer,
Christoph Freysoldt,
Baptiste Gault,
Shyam Katnagallu
Abstract:
Field evaporation from ionic or covalently bonded materials often leads to the emission of molecular ions. The metastability of these molecular ions, particularly under the influence of the intense electrostatic field (1010 Vm-1), makes them prone to dissociation with or without an exchange of energy amongst them. These processes can affect the analytical performance of atom probe tomography (APT)…
▽ More
Field evaporation from ionic or covalently bonded materials often leads to the emission of molecular ions. The metastability of these molecular ions, particularly under the influence of the intense electrostatic field (1010 Vm-1), makes them prone to dissociation with or without an exchange of energy amongst them. These processes can affect the analytical performance of atom probe tomography (APT). For instance, neutral species formed through dissociation may not be detected at all or with a time of flight no longer related to their mass, causing their loss from the analysis. Here, we evaluated the changes in the measured composition of FeO, Fe2O3 and Fe3O4 across a wide range of analysis conditions. Possible dissociation reactions are predicted by density-functional theory (DFT) calculations considering the spin states of the molecules. The energetically favoured reactions are traced on to the multi-hit ion correlation histograms, to confirm their existence within experiments, using an automated Python-based routine. The detected reactions are carefully analysed to reflect upon the influence of these neutrals from dissociation reactions on the performance of APT for analysing iron oxides.
△ Less
Submitted 23 January, 2024;
originally announced January 2024.
-
On the role of Grain Boundary Character in the Stress Corrosion Cracking of Nanoporous Gold Thin Films
Authors:
Aparna Saksena,
Ayman El-Zoka,
Alaukik Saxena,
Ezgi Hatipoglu,
Jochen M. Schneider,
Baptiste Gault
Abstract:
For its potential as a catalyst, nanoporous gold (NPG) prepared through dealloying of bulk Ag-Au alloys has been extensively investigated. NPG thin films can offer ease of handling, better tunability of the chemistry and microstructure of the nanoporous structure, and represent a more sustainable usage of scarce resources. These films are however prone to intergranular cracking during dealloying,…
▽ More
For its potential as a catalyst, nanoporous gold (NPG) prepared through dealloying of bulk Ag-Au alloys has been extensively investigated. NPG thin films can offer ease of handling, better tunability of the chemistry and microstructure of the nanoporous structure, and represent a more sustainable usage of scarce resources. These films are however prone to intergranular cracking during dealloying, limiting their stability and potential applications. Here, we set out to systematically investigate the grain boundaries in Au28Ag72 thin films. We observe that a sample synthesized at 400 °C is at least 2.5 times less prone to cracking compared to a sample synthesized at room temperature. This correlates with a higher density of coincident site lattice grain boundaries, especially the density of coherent sigma 3, increased, which appear resistant against cracking. Nanoscale compositional analysis of random high-angle grain boundaries reveals prominent Ag enrichment up to 77 at.%, whereas sigma 3 coherent twin boundaries show Au enrichment of up to 30 at.%. The misorientation and the chemistry of grain boundaries hence affect their dealloying behavior, which in turn controls the cracking, and the possible longevity of NPG thin films for application in electrocatalysis.
△ Less
Submitted 19 December, 2023;
originally announced December 2023.
-
Facilitating Atom Probe Tomography of 2D MXene Films by In Situ Sputtering
Authors:
Mathias Krämer,
Bar Favelukis,
Maxim Sokol,
Brian A. Rosen,
Noam Eliaz,
Se-Ho Kim,
Baptiste Gault
Abstract:
2D materials are emerging as promising nanomaterials for applications in energy storage and catalysis. In the wet chemical synthesis of MXenes, these 2D transition metal carbides and nitrides are terminated with a variety of functional groups, and cations such as Li+ are often used to intercalate into the structure to obtain exfoliated nanosheets. Given the various elements involved in their synth…
▽ More
2D materials are emerging as promising nanomaterials for applications in energy storage and catalysis. In the wet chemical synthesis of MXenes, these 2D transition metal carbides and nitrides are terminated with a variety of functional groups, and cations such as Li+ are often used to intercalate into the structure to obtain exfoliated nanosheets. Given the various elements involved in their synthesis, it is crucial to determine the detailed chemical composition of the final product, in order to better assess and understand the relationships between composition and properties of these materials. To facilitate atom probe tomography analysis of these materials, a revised specimen preparation method is presented in this study. A colloidal Ti3C2Tz MXene solution was processed into an additive-free free-standing film and specimens were prepared using a dual beam scanning electron microscope / focused ion beam. To mechanically stabilize the fragile specimens, they were coated using an in situ sputtering technique. As various 2D material inks can be processed into such free-standing films, the presented approach is pivotal for enabling atom probe analysis of other 2D materials.
△ Less
Submitted 30 November, 2023;
originally announced November 2023.
-
Nanoporous gold thin films as substrates to analyze liquids by cryo-atom probe tomography
Authors:
E. V. Woods,
A. Saksena,
A. A. El-Zoka,
L. T. Stephenson,
T. M. Schwarz,
M. P. Singh,
L. S. Aota,
S. -H. Kim,
J. Schneider,
B. Gault
Abstract:
Cryogenic atom probe tomography (cryo-APT) is being developed to enable nanoscale compositional analyses of frozen liquids. Yet, the availability of readily available substrates that allow for the fixation of liquids while providing sufficient strength to their interface, is still an issue. Here we propose the use of 1-2 microns thick binary alloy film of gold-silver (AuAg) sputtered onto flat sil…
▽ More
Cryogenic atom probe tomography (cryo-APT) is being developed to enable nanoscale compositional analyses of frozen liquids. Yet, the availability of readily available substrates that allow for the fixation of liquids while providing sufficient strength to their interface, is still an issue. Here we propose the use of 1-2 microns thick binary alloy film of gold-silver (AuAg) sputtered onto flat silicon, with sufficient adhesion without an additional layer. Through chemical dealloying, we successfully fabricate a nanoporous substrate, with open-pore structure, which is mounted on a microarray of Si posts by lift out in the focused-ion beam, allowing for cryogenic fixation of liquids. We present cryo-APT results obtained after cryogenic sharpening, vacuum cryo-transfer and analysis of pure water on top and inside the nanoporous film. We demonstrate that this new substrate has the requisite characteristics for facilitating cryo-APT of frozen liquids, with a relatively lower volume of precious metals. This complete workflow represents an improved approach for frozen liquid analysis, from preparation of the films to the successful fixation of the liquid in the porous network, to cryo-atom probe tomography.
△ Less
Submitted 22 November, 2023;
originally announced November 2023.
-
Direct imaging of spatial heterogeneities in type II superconductors
Authors:
Donald M. Evans,
Michele Conroy,
Lukas Puntigam,
Dorina Croitori,
Lilian Prodan,
James O. Douglas,
Baptiste Gault,
Vladimir Tsurkan
Abstract:
Understanding the exotic properties of quantum materials, including high-temperature superconductors, remains a formidable challenge that demands direct insights into electronic conductivity. Current methodologies either capture a bulk average or near-atomically-resolved information, missing direct measurements at the critical intermediate length scales. Here, using the superconductor Fe(Se,Te) as…
▽ More
Understanding the exotic properties of quantum materials, including high-temperature superconductors, remains a formidable challenge that demands direct insights into electronic conductivity. Current methodologies either capture a bulk average or near-atomically-resolved information, missing direct measurements at the critical intermediate length scales. Here, using the superconductor Fe(Se,Te) as a model system, we use low-temperature conductive atomic force microscopy (cAFM) to bridge this gap. Contrary to the uniform superconductivity anticipated from bulk assessments, cAFM uncovers micron-scale conductive intrusions within a relatively insulating matrix. Subsequent compositional mapping through atom probe tomography, shows that differences in conductivity correlated with local changes in composition. cAFM, supported by advanced microscopy and microanalysis, represents a methodological breakthrough that can be used to navigate the intricate landscape of high-temperature superconductors and the broader realm of quantum materials. Such fundamental information is critical for theoretical understanding and future guided design.
△ Less
Submitted 30 October, 2023;
originally announced October 2023.
-
Optimizing site-specific specimen preparation for Atom Probe Tomography by using hydrogen for visualizing radiation-induced damage
Authors:
Aparna Saksena,
Binhan Sun,
Xizhen Dong,
Heena Khanchandani,
Dirk Ponge,
Baptiste Gault
Abstract:
Atom probe tomography (APT) is extensively used to measure the local chemistry of materials. Site-specific preparation via a focused ion beam (FIB) is routinely implemented to fabricate needle-shaped specimens with an end radius in the range of 50 nm. This preparation route is sometimes supplemented by transmission Kikuchi diffraction (TKD) to facilitate the positioning of a region of interest suf…
▽ More
Atom probe tomography (APT) is extensively used to measure the local chemistry of materials. Site-specific preparation via a focused ion beam (FIB) is routinely implemented to fabricate needle-shaped specimens with an end radius in the range of 50 nm. This preparation route is sometimes supplemented by transmission Kikuchi diffraction (TKD) to facilitate the positioning of a region of interest sufficiently close to the apex. Irradiating the specimen with energetic electrons and ions can lead to the generation of vacancies and even amorphization of the specimen. These extrinsically created vacancies become crucial for probing the hydrogen or deuterium distribution since they act as a strong trap. Here, we investigated the feasibility of site-specific preparation of a two-phase medium-Mn steel containing austenite (fcc) and ferrite (bcc). Following gaseous charging of APT specimens in deuterium (D2), clusters enriched by up to 35 at.% D, are imaged after Pt deposition, conventional Ga-FIB preparation, and TKD conducted separately. These D-rich clusters are assumed to arise from the agglomeration of vacancies acting as strong traps. By systematically eliminating these preparation-induced damages, we finally introduce a workflow allowing for studying intrinsic traps for H/D inherent to the material.
△ Less
Submitted 13 October, 2023;
originally announced October 2023.
-
Facilitating the systematic nanoscale study of battery materials by atom probe tomography through in-situ metal coating
Authors:
Mahander P Singh,
Eric V Woods,
Se Ho Kim,
Chanwon Jung,
Leonardo S. Aota,
Baptiste Gault
Abstract:
Through its capability for 3D mapping of Li at the nanoscale, atom probe tomography (APT) is poised to play a key role in understanding the microstructural degradation of lithium-ion batteries (LIB) during successive charge and discharge cycles. However, APT application to materials for LIB is plagued by the field induced delithiation (deintercalation) of Li-ions during the analysis itself that pr…
▽ More
Through its capability for 3D mapping of Li at the nanoscale, atom probe tomography (APT) is poised to play a key role in understanding the microstructural degradation of lithium-ion batteries (LIB) during successive charge and discharge cycles. However, APT application to materials for LIB is plagued by the field induced delithiation (deintercalation) of Li-ions during the analysis itself that prevents the precise assessment of the Li distribution. Here, we showcase how a thin Cr-coating, in-situ formed on APT specimens of NMC811 in the focused-ion beam (FIB), preserves the sample's integrity and circumvent this deleterious delithiation. Cr-coated specimens demonstrated remarkable improvements in data quality and virtually eliminated premature specimen failures, allowing for more precise measurements via. improved statistics. Through improved data analysis, we reveal substantial cation fluctuations in commercial grade NMC811, including complete grains of LiMnO. The current methodology stands out for its simplicity and cost-effectiveness and is a viable approach to prepare battery cathodes and anodes for systematic APT studies.
△ Less
Submitted 14 September, 2023;
originally announced September 2023.
-
In-situ metallic coating of atom probe specimen for enhanced yield, performance, and increased field-of-view
Authors:
Tim M. Schwarz,
Eric Woods,
Mahander P. Singh,
Chanwon Jung,
Leonardo S. Aota,
Kyuseon Jang,
Mathias Krämer,
Se-Ho Kim,
Ingrid McCarroll,
Baptiste Gault
Abstract:
Atom probe tomography requires needle-shaped specimens with a diameter typically below 100 nm, making them both very fragile and reactive, and defects (notches at grain boundaries or precipitates) are known to affect the yield and data quality. The use of a conformal coating directly on the sharpened specimen has been proposed to increase yield and reduce background. However, to date, these coatin…
▽ More
Atom probe tomography requires needle-shaped specimens with a diameter typically below 100 nm, making them both very fragile and reactive, and defects (notches at grain boundaries or precipitates) are known to affect the yield and data quality. The use of a conformal coating directly on the sharpened specimen has been proposed to increase yield and reduce background. However, to date, these coatings have been applied ex-situ and mostly are not uniformly. Here, we report on the controlled focused ion beam in-situ deposition of a thin metal film on specimens immediately after specimen preparation. Different metallic targets e.g. Cr were attached to a micromanipulator via a conventional lift-out method and sputtered using the Ga or Xe ions. We showcase the many advantages of coating specimens from metallic to non-metallic materials. We have identified an increase in data quality and yield, an improvement of the mass resolution, as well as an increase in the effective field-of-view enabling visualization of the entire original specimen, including the complete surface oxide layer. The ease of implementation of the approach makes it very attractive for generalizing its use across a very wide range of atom probe analyses.
△ Less
Submitted 17 January, 2024; v1 submitted 14 September, 2023;
originally announced September 2023.
-
Scalable Substrate Development for Aqueous Biological Samples for Atom Probe Tomography
Authors:
Eric V. Woods,
Se-Ho Kim,
Ayman A. El-Zoka,
Leigh T. Stephenson,
Baptiste Gault
Abstract:
Reliable and consistent preparation of atom probe tomography (APT) specimens from aqueous and hydrated biological specimens remains a significant challenge. One particularly difficult process step is the use of a focused ion beam (FIB) instrument for preparing the required needle-shaped specimen, typically involving a "lift-out" procedure of a small sample of material. Here, two alternative substr…
▽ More
Reliable and consistent preparation of atom probe tomography (APT) specimens from aqueous and hydrated biological specimens remains a significant challenge. One particularly difficult process step is the use of a focused ion beam (FIB) instrument for preparing the required needle-shaped specimen, typically involving a "lift-out" procedure of a small sample of material. Here, two alternative substrate designs are introduced that enable using FIB only for sharpening, along with example APT datasets. The first design is a laser-cut FIB-style half-grid close to those used for transmission-electron microscopy, that can be used in a grid holder compatible with APT pucks. The second design is a larger, standalone self-supporting substrate called a "crown", with several specimen positions that self-aligns in APT pucks, prepared by electrical discharge machining (EDM). Both designs are made nanoporous, to provide strength to the liquid-substrate interface, using chemical and vacuum dealloying. We select alpha brass a simple, widely available, lower-cost alternative to previously proposed substrates. We present the resulting designs, APT data, and provide suggestions to help drive wider community adoption.
△ Less
Submitted 31 August, 2023;
originally announced August 2023.
-
Chemical heterogeneity enhances hydrogen resistance in high-strength steels
Authors:
Binhan Sun,
Wenjun Lu,
Ran Ding,
Surendra Kumar Makineni,
Baptiste Gault,
Chun-Hung Wu,
Di Wan,
Hao Chen,
Dirk Ponge,
Dierk Raabe
Abstract:
When H, the lightest, smallest and most abundant atom in the universe, makes its way into a high-strength alloy (>650 MPa), the material's load-bearing capacity is abruptly lost. This phenomenon, known as H embrittlement, was responsible for the catastrophic and unpredictable failure of large engineering structures in service. The inherent antagonism between high strength requirements and H embrit…
▽ More
When H, the lightest, smallest and most abundant atom in the universe, makes its way into a high-strength alloy (>650 MPa), the material's load-bearing capacity is abruptly lost. This phenomenon, known as H embrittlement, was responsible for the catastrophic and unpredictable failure of large engineering structures in service. The inherent antagonism between high strength requirements and H embrittlement susceptibility strongly hinders the design of lightweight yet reliable structural components needed for carbon-free hydrogen-propelled industries and reduced-emission transportation solutions. Inexpensive and scalable alloying and microstructural solutions that enable both, an intrinsically high resilience to H and high mechanical performance, must be found. Here we introduce a counterintuitive strategy to exploit typically undesired chemical heterogeneity within the material's microstructure that allows the local enhancement of crack resistance and local H trapping, thereby enhancing the resistance against H embrittlement. We deploy this approach to a lightweight, high-strength steel and produce a high-number density Mn-rich zones dispersed within the microstructure. These solute-rich buffer regions allow for local micro-tuning of the phase stability, arresting H-induced microcracks thus interrupting the H-assisted damage evolution chain, regardless of how and when H is introduced and also regardless of the underlying embrittling mechanisms. A superior H embrittlement resistance, increased by a factor of two compared to a reference material with a homogeneous solute distribution within each microstructure constituent, is achieved at no expense of the material's strength and ductility.
△ Less
Submitted 30 August, 2023;
originally announced August 2023.
-
Microstructure of a spark-plasma-sintered Fe2VAl-type Heusler alloy for thermoelectric application
Authors:
Leonie Gomell,
Imants Dirba,
Hanna Bishara,
Zhongji Sun,
Łukasz. Żrodowski,
Tomasz Choma,
Bartosz Morończyk,
Gerhard Dehm,
Konstantin P. Skokov,
Oliver Gutfleisch,
B. Gault
Abstract:
The influence of microstructure on thermoelectricity is increasingly recognized. Approaches for microstructural engineering can hence be exploited to enhance thermoelectric performance, particularly through manipulating crystalline defects, their structure, and composition. Here, we focus on a full-Heusler Fe2VAl-based compound that is one of the most promising thermoelectric materials containing…
▽ More
The influence of microstructure on thermoelectricity is increasingly recognized. Approaches for microstructural engineering can hence be exploited to enhance thermoelectric performance, particularly through manipulating crystalline defects, their structure, and composition. Here, we focus on a full-Heusler Fe2VAl-based compound that is one of the most promising thermoelectric materials containing only Earth-abundant, non-toxic elements. A Fe2VTa0.05Al0.95 cast alloy was atomized under a nitrogen-rich atmosphere to induce nitride precipitation. Nanometer- to micrometer-scale microstructural investigations by advanced scanning electron microscopy and atom probe tomography (APT) are performed on the powder first and then on the material consolidated by spark-plasma sintering for an increasing time. APT reveals an unexpected pick-up of additional impurities from atomization, namely W and Mo. The microstructure is then correlated with local and global measurements of the thermoelectric properties. At grain boundaries, segregation and precipitation locally reduce the electrical resistivity, as evidenced by in-situ four-point probe measurements. The final microstructure contains a hierarchy of structural defects, including individual point defects, dislocations, grain boundaries, and precipitates, that allow for a strong decrease in thermal conductivity. In combination, these effects provide an appreciable increase in thermoelectric performance.
△ Less
Submitted 11 July, 2023;
originally announced July 2023.
-
Crack arrest markings in stress corrosion cracking of 7xxx aluminium alloys: insights into active hydrogen embrittlement mechanisms
Authors:
Martí López Freixes,
Xuyang Zhou,
Raquel Aymerich-Armengol,
Miquel Vega-Paredes,
Lionel Peguet,
Timothy Warner,
Baptiste Gault
Abstract:
Crack growth in stress corrosion cracking (SCC) in 7xxx Al alloys is an intermittent process, which generates successive crack arrest markings (CAMs) visible on the fracture surface. It is conjectured that H is generated at the crack tip during crack arrest, which then facilitates crack advancement through hydrogen embrittlement. Here, nanoscale imaging by 4D-scanning-transmission electron microsc…
▽ More
Crack growth in stress corrosion cracking (SCC) in 7xxx Al alloys is an intermittent process, which generates successive crack arrest markings (CAMs) visible on the fracture surface. It is conjectured that H is generated at the crack tip during crack arrest, which then facilitates crack advancement through hydrogen embrittlement. Here, nanoscale imaging by 4D-scanning-transmission electron microscopy and atom probe tomography show that CAMs are produced by oxidation at the arrested crack tip, matrix precipitates dissolve and solute diffuse towards the growing CAM. Substantial homogenous residual strain remains underneath the fracture surface, indicative of non-localized plastic activity. Our study suggests that H induces crack propagation through decohesion.
△ Less
Submitted 5 June, 2023;
originally announced June 2023.
-
Near-Atomic Scale Perspective on the Oxidation of Ti$_3$C$_2$T$_x$ MXenes: Insights from Atom Probe Tomography
Authors:
Mathias Krämer,
Bar Favelukis,
Ayman A. El-Zoka,
Maxim Sokol,
Brian A. Rosen,
Noam Eliaz,
Se-Ho Kim,
Baptiste Gault
Abstract:
MXenes are a family of 2D transition metal carbides and nitrides with remarkable properties and great potential for energy storage and catalysis applications. However, their oxidation behavior is not yet fully understood, and there are still open questions regarding the spatial distribution and precise quantification of surface terminations, intercalated ions, and possible uncontrolled impurities…
▽ More
MXenes are a family of 2D transition metal carbides and nitrides with remarkable properties and great potential for energy storage and catalysis applications. However, their oxidation behavior is not yet fully understood, and there are still open questions regarding the spatial distribution and precise quantification of surface terminations, intercalated ions, and possible uncontrolled impurities incorporated during synthesis and processing. Here, atom probe tomography analysis of as-synthesized Ti$_3$C$_2$T$_x$ MXenes reveals the presence of alkali (Li, Na) and halogen (Cl, F) elements as well as unetched Al. Following oxidation of the colloidal solution of MXenes, it is observed that the alkalies enriched in TiO$_2$ nanowires. Although these elements are tolerated through the incorporation by wet chemical synthesis, they are often overlooked when the activity of these materials is considered, particularly during catalytic testing. This work demonstrates how the capability of atom probe tomography to image these elements in 3D at the near-atomic scale can help to better understand the activity and degradation of MXenes, in order to guide their synthesis for superior functional properties.
△ Less
Submitted 31 May, 2023;
originally announced May 2023.
-
The Premartensite and Martensite in Fe50Rh50 System
Authors:
Esmaeil Adabifiroozjaei,
Fernando Maccari,
Lukas Schaefer,
Tianshu Jiang,
Oscar Recalde-Benitez,
Alisa Chirkova,
Navid Shayanfar,
Imants Dirba,
Nagaarjhuna A Kani,
Olga Shuleshova,
Robert Winkler,
Alexander Zintler,
Ziyuan Rao,
Lukas Pfeuffer,
Andras Kovacs,
Rafal E Dunin-Borkowski,
Michael Farle,
Konstantin Skokov,
Baptiste Gault,
Markus Gruner,
Oliver Gutfleisch,
Leopoldo Molina-Luna
Abstract:
Metallic/intermetalic materials with BCC structures hold an intrinsic instability due to phonon softening along [110] dirrection, causing BCC to lower-symmetry phases transformation when the BCC structures are thermally or mechanically stressed. Fe50Rh50 binary system is one of the exceptional BCC structures (ordered-B2) that has not been yet showing such transformation upon application of thermal…
▽ More
Metallic/intermetalic materials with BCC structures hold an intrinsic instability due to phonon softening along [110] dirrection, causing BCC to lower-symmetry phases transformation when the BCC structures are thermally or mechanically stressed. Fe50Rh50 binary system is one of the exceptional BCC structures (ordered-B2) that has not been yet showing such transformation upon application of thermal stress, although mechanical deformation results in B2 to disordered FCC (gamma) and L10 phases transformation. Here, a comprehensive transmission electron microscopy (TEM) study is conducted on thermally-stressed samples of Fe50Rh50 aged at water and liquid nitrogen from 1150 degree C and 1250 degree C. The results show that, samples quenched from 1150 degree C into water and liquid nitrogen show presence of 1/4{110} and 1/2{110} satellite reflections, the latter of which is expected from phonon dispersion curves obtained by density functional theory calculation. Therefore, it is believed that Fe50Rh50 maintains the B2 structure that is in premartensite state. Once Fe50Rh50 is quenched from 1250 degree C into liquid nitrogen, formation of two short-range ordered tetragonal phases with various c/a ratios (~1.15 and 1.4) is observed in line with phases formed from mechanically deformed (30%) sample. According to our observations, an accurate atomistic shear model ({110}<1-10>) is presented that describes the martensitic transformation of B2 to these tetragonal phases. These findings offer implications useful for understanding of magnetic and physical characteristics of metallic/intermetallic materials.
△ Less
Submitted 3 May, 2023; v1 submitted 2 May, 2023;
originally announced May 2023.
-
Towards engineering the perfect defect in high-performing permanent magnets
Authors:
S. Giron,
N. Polin,
E. Adabifiroozjaei,
Y. Yang,
A. Kovács,
T. P. Almeida,
D. Ohmer,
K. Üstüner,
A. Saxena,
M. Katter,
I. A. Radulov,
C. Freysoldt,
R. E. Dunin-Borkowski,
M. Farle,
K. Durst,
H. Zhang,
L. Alff,
K. Ollefs,
B. -X. Xu,
O. Gutfleisch,
L. Molina-Luna,
B. Gault,
K. P. Skokov
Abstract:
Permanent magnets draw their properties from a complex interplay, across multiple length scales, of the composition and distribution of their constituting phases, that act as building blocks, each with their associated intrinsic properties. Gaining a fundamental understanding of these interactions is hence key to decipher the origins of their magnetic performance and facilitate the engineering of…
▽ More
Permanent magnets draw their properties from a complex interplay, across multiple length scales, of the composition and distribution of their constituting phases, that act as building blocks, each with their associated intrinsic properties. Gaining a fundamental understanding of these interactions is hence key to decipher the origins of their magnetic performance and facilitate the engineering of better-performing magnets, through unlocking the design of the "perfect defects" for ultimate pinning of magnetic domains. Here, we deployed advanced multiscale microscopy and microanalysis on a bulk Sm2(CoFeCuZr)17 pinning-type high-performance magnet with outstanding thermal and chemical stability. Making use of regions with different chemical compositions, we showcase how both a change in the composition and distribution of copper, along with the atomic arrangements enforce the pinning of magnetic domains, as imaged by nanoscale magnetic induction mapping. Micromagnetic simulations bridge the scales to provide an understanding of how these peculiarities of micro- and nanostructure change the hard magnetic behaviour of Sm2(CoFeCuZr)17 magnets. Unveiling the origins of the reduced coercivity allows us to propose an atomic-scale defect and chemistry manipulation strategy to define ways toward future hard magnets.
△ Less
Submitted 4 June, 2023; v1 submitted 28 April, 2023;
originally announced April 2023.
-
A machine learning framework for quantifying chemical segregation and microstructural features in atom probe tomography data
Authors:
Alaukik Saxena,
Nikita Polin,
Navyanth Kusampudi,
Shyam Katnagallu,
Leopoldo Molina-Luna,
Oliver Gutfleisch,
Benjamin Berkels,
Baptiste Gault,
Jörg Neugebauer,
Christoph Freysoldt
Abstract:
Atom probe tomography (APT) is ideally suited to characterize and understand the interplay of chemical segregation and microstructure in modern multicomponent materials. Yet, the quantitative analysis typically relies on human expertise to define regions of interest. We introduce a computationally efficient, multistage machine learning strategy to identify chemically distinct domains in a semi aut…
▽ More
Atom probe tomography (APT) is ideally suited to characterize and understand the interplay of chemical segregation and microstructure in modern multicomponent materials. Yet, the quantitative analysis typically relies on human expertise to define regions of interest. We introduce a computationally efficient, multistage machine learning strategy to identify chemically distinct domains in a semi automated way, and subsequently quantify their geometric and compositional characteristics. In our algorithmic pipeline, we first coarse grain the APT data into voxels, collect the composition statistics, and decompose it via clustering in composition space. The composition classification then enables the real space segmentation via a density based clustering algorithm, thus revealing the microstructure at voxel resolution. Our approach is demonstrated for a Sm(Co,Fe)ZrCu alloy. The alloy exhibits two precipitate phases with a plate-like, but intertwined morphology. The primary segmentation is further refined to disentangle these geometrically complex precipitates into individual plate like parts by an unsupervised approach based on principle component analysis, or a U-Net based semantic segmentation trained on the former. Following the chemical and geometric analysis, detailed chemical distribution and segregation effects relative to the predominant plate-like geometry can be readily mapped without resorting to the initial voxelization.
△ Less
Submitted 18 April, 2023;
originally announced April 2023.
-
A versatile and reproducible cryo-sample preparation methodology for atom probe studies
Authors:
Eric V. Woods,
Mahander P. Singh,
Se-Ho Kim,
Tim M. Schwarz,
James O. Douglas,
Ayman El-Zoka,
Finn Giulani,
Baptiste Gault
Abstract:
Repeatable and reliable site-specific preparation of specimens for atom probe tomography (APT) at cryogenic temperatures has proven challenging. A generalized workflow is required for cryogenic-specimen preparation including lift-out via focused-ion beam and in-situ deposition of capping layers, to strengthen specimens that will be exposed to high electric field and stresses during field evaporati…
▽ More
Repeatable and reliable site-specific preparation of specimens for atom probe tomography (APT) at cryogenic temperatures has proven challenging. A generalized workflow is required for cryogenic-specimen preparation including lift-out via focused-ion beam and in-situ deposition of capping layers, to strengthen specimens that will be exposed to high electric field and stresses during field evaporation in APT, and protect them from environment during transfer into the atom probe. Here, we build on existing protocols, and showcase preparation and analysis of a variety of metals, oxides and supported frozen liquids and battery materials. We demonstrate reliable in-situ deposition of a metallic capping layer that significantly improve the atom probe data quality for challenging material systems, particularly battery cathode materials which are subjected to delithiation during the atom probe analysis itself. Our workflow designed is versatile and transferable widely to other instruments.
△ Less
Submitted 31 March, 2023;
originally announced March 2023.
-
Machine learning-enabled tomographic imaging of chemical short-range atomic ordering
Authors:
Yue Li,
Timoteo Colnaghi,
Yilun Gong,
Huaide Zhang,
Yuan Yu,
Ye Wei,
Bin Gan,
Min Song,
Andreas Marek,
Markus Rampp,
Siyuan Zhang,
Zongrui Pei,
Matthias Wuttig,
Jörg Neugebauer,
Zhangwei Wang,
Baptiste Gault
Abstract:
In solids, chemical short-range order (CSRO) refers to the self-organisation of atoms of certain species occupying specific crystal sites. CSRO is increasingly being envisaged as a lever to tailor the mechanical and functional properties of materials. Yet quantitative relationships between properties and the morphology, number density, and atomic configurations of CSRO domains remain elusive. Here…
▽ More
In solids, chemical short-range order (CSRO) refers to the self-organisation of atoms of certain species occupying specific crystal sites. CSRO is increasingly being envisaged as a lever to tailor the mechanical and functional properties of materials. Yet quantitative relationships between properties and the morphology, number density, and atomic configurations of CSRO domains remain elusive. Herein, we showcase how machine learning-enhanced atom probe tomography (APT) can mine the near-atomically resolved APT data and jointly exploit the technique's high elemental sensitivity to provide a 3D quantitative analysis of CSRO in a CoCrNi medium-entropy alloy. We reveal multiple CSRO configurations, with their formation supported by state-of-the-art Monte-Carlo simulations. Quantitative analysis of these CSROs allows us to establish relationships between processing parameters and physical properties. The unambiguous characterization of CSRO will help refine strategies for designing advanced materials by manipulating atomic-scale architectures.
△ Less
Submitted 23 March, 2023;
originally announced March 2023.
-
Exploring the Surface Segregation of Rh Dopant in PtNi Nanoparticles through Atom Probe Tomography Analysis
Authors:
Se-Ho Kim,
Hosun Jun,
Kyuseon Jang,
Pyuck-Pa Choi,
Baptiste Gault,
Chanwon Jung
Abstract:
Proton exchange membrane fuel cells hold promise as energy conversion devices for hydrogen-based power generation and storage. However, the slow kinetics of the oxygen reduction at the cathode imposes the need for highly active catalysts, typically Pt or Pt-based, with a large available area. The scarcity of Pt increases deployment and operational cost, driving the development of novel highly-acti…
▽ More
Proton exchange membrane fuel cells hold promise as energy conversion devices for hydrogen-based power generation and storage. However, the slow kinetics of the oxygen reduction at the cathode imposes the need for highly active catalysts, typically Pt or Pt-based, with a large available area. The scarcity of Pt increases deployment and operational cost, driving the development of novel highly-active material systems. As an alternative, Rh-doped PtNi nanoparticle has been suggested as promising oxygen reduction catalyst, but the 3D distributions of constituent elements in the nanoparticles have remained unclear, making it difficult to guide property optimization. Here, a combination of advanced microscopy and microanalysis techniques is used to study the Rh distribution in the PtNi nanoparticles, and Rh surface segregation is revealed, even with an overall Rh content below 2 at. %. Our findings suggest that doping and surface chemistry must be carefully investigated to establish a clear link with catalytic activity can truly be established.
△ Less
Submitted 18 March, 2023;
originally announced March 2023.
-
Nanoscale perspective on the stress-corrosion cracking behavior of a peak-aged 7XXX-Al alloy
Authors:
Martí López Freixes,
Lionel Peguet,
Timothy Warner,
Baptiste Gault
Abstract:
High strength 7xxx Al-alloys are currently commonly used in aerospace and are expected to be increasingly employed in the automotive sector for weight reduction purposes. These alloys can however be sensitive to stress-corrosion cracking (SCC) depending on temper and loading conditions. Both the alloy's grain structure and composition are believed to play a key role in determining sensitivity to S…
▽ More
High strength 7xxx Al-alloys are currently commonly used in aerospace and are expected to be increasingly employed in the automotive sector for weight reduction purposes. These alloys can however be sensitive to stress-corrosion cracking (SCC) depending on temper and loading conditions. Both the alloy's grain structure and composition are believed to play a key role in determining sensitivity to SCC. Here, we study at the nanometer scale the evolution of the microstructure near stress corrosion cracks on two different model variants of the 7140 aluminum alloy. We performed double cantilever beam (DCB) crack growth tests in hot (70°C) humid air, on samples extracted at quarter-thickness (T/4) and mid-thickness (T/2) and heat treated to a non-industrial, SCC sensitive T6 condition. The sample at T/4 shows a lower KISCC along with flatter grains and a higher solute content, whereas both samples exhibit similar crack growth rates at higher stress intensities. We report on precipitate dissolution and matrix solute enrichment near the crack tips, with the T/4 position presenting the higher increase in solute levels. The near grain boundary microstructure ahead of the crack is modified, with evidence of precipitate dissolution and transport of solutes towards the stress-corrosion crack tip. These results agree with a recent report on another 7xxx Al-alloy after SCC in Cl-solution, supporting the possibility that these mechanisms are generally occurring. We relate our findings with the measured SCC behavior and provide an array of possible mechanisms that could be widely applicable in SCC of high strength Al-alloys.
△ Less
Submitted 8 March, 2023;
originally announced March 2023.
-
Atomic scale understanding of the role of hydrogen and oxygen segregation in the embrittlement of grain boundaries in a twinning induced plasticity steel
Authors:
Heena Khanchandani,
Baptiste Gault
Abstract:
Twinning induced plasticity (TWIP) steels are high strength metallic materials with potential for structural components in e.g. automotive applications. However, they are prone to hydrogen embrittlement (HE) and galvanic corrosion. We investigated the susceptibility of a model Fe 27Mn 0.3C (wt%) TWIP steel towards HE and oxidation at the sub-nanometer scale by atom probe tomography. We measured se…
▽ More
Twinning induced plasticity (TWIP) steels are high strength metallic materials with potential for structural components in e.g. automotive applications. However, they are prone to hydrogen embrittlement (HE) and galvanic corrosion. We investigated the susceptibility of a model Fe 27Mn 0.3C (wt%) TWIP steel towards HE and oxidation at the sub-nanometer scale by atom probe tomography. We measured segregation of hydrogen and oxygen at grain boundaries, which appears to be associated to a strong manganese depletion. Our study suggests a correlation between HE and oxidation mechanisms in TWIP steels, which we argue can combine to favor the previously reported hydrogen enhanced decohesion (HEDE) of grain boundaries.
△ Less
Submitted 2 May, 2023; v1 submitted 13 February, 2023;
originally announced February 2023.
-
B dopant evolution in Pd catalysts after H evolution/oxidation reaction in alkaline environment
Authors:
Se-Ho Kim,
Su-Hyun Yoo,
Leonardo Shoji Aota,
Ayman El-Zoka,
Philwoong Kang,
Yonghyuk Lee,
Baptiste Gault
Abstract:
Introduction of interstitial dopants has opened a new pathway to optimize nanoparticle catalytic activity for, e.g., hydrogen evolution/oxidation and other reactions. Here, we discuss the stability of a property-enhancing dopant, B, introduced through controlled synthesis of an electrocatalyst Pd aerogel. We observe significant removal of B after the hydrogen evolution/oxidation reaction. Ab-initi…
▽ More
Introduction of interstitial dopants has opened a new pathway to optimize nanoparticle catalytic activity for, e.g., hydrogen evolution/oxidation and other reactions. Here, we discuss the stability of a property-enhancing dopant, B, introduced through controlled synthesis of an electrocatalyst Pd aerogel. We observe significant removal of B after the hydrogen evolution/oxidation reaction. Ab-initio calculations show that the high stability of sub-surface B in Pd is substantially reduced when H is ad/absorbed on the surface, favoring its departure from the host nanostructure. The destabilization of sub-surface B is more pronounced as more H occupies surface sites and empty interstitial sites. We hence demonstrate that the H2 fuel/product itself favors the microstructural degradation of the electrocatalyst and an associated drop in activity.
△ Less
Submitted 6 February, 2023;
originally announced February 2023.
-
Revealing compositional evolution of PdAu electrocatalyst by atom probe tomography
Authors:
Leonardo Shoji Aota,
Se-Ho Kim,
Chanwon Jung,
Siyuan Zhang,
Baptiste Gault
Abstract:
Pd-based electro-catalysts are a key component to improve the methanol oxidation reaction (MOR) kinetics from alcohol fuel cells. However, the performance of such catalysts is degraded over time. To understand the microstructural/atomic scale chemical changes responsible for such effect, scanning (transmission) electron microscopies and atom probe tomography (APT) were performed after accelerated…
▽ More
Pd-based electro-catalysts are a key component to improve the methanol oxidation reaction (MOR) kinetics from alcohol fuel cells. However, the performance of such catalysts is degraded over time. To understand the microstructural/atomic scale chemical changes responsible for such effect, scanning (transmission) electron microscopies and atom probe tomography (APT) were performed after accelerated degradation tests (ADT). No morphological changes are observed after 1000 MOR cycles. Contrastingly, (1) Pd and B are leached from PdAu nanoparticles and (2) Au-rich regions are formed at the surface of the catalyst. These insights highlight the importance of understanding the chemical modification undergoing upon MOR to design superior catalysts.
△ Less
Submitted 8 February, 2023; v1 submitted 6 February, 2023;
originally announced February 2023.
-
Atom probe analysis of BaTiO3 enabled by metallic shielding
Authors:
Se-Ho Kim,
Kihyun Shin,
Xuyang Zhou,
Chanwon Jung,
Hyun You Kim,
Stella Pedrazzini,
Michele Conroy,
Graeme Henkelman,
Baptiste Gault
Abstract:
Atom probe tomography has been raising in prominence as a microscopy and microanalysis technique to gain sub-nanoscale information from technologically-relevant materials. However, the analysis of some functional ceramics, particularly perovskites, has remained challenging with extremely low yield and success rate. This seems particularly problematic for materials with high piezoelectric activity,…
▽ More
Atom probe tomography has been raising in prominence as a microscopy and microanalysis technique to gain sub-nanoscale information from technologically-relevant materials. However, the analysis of some functional ceramics, particularly perovskites, has remained challenging with extremely low yield and success rate. This seems particularly problematic for materials with high piezoelectric activity, which may be difficult to express at the low temperatures necessary for satisfactory atom probe analysis. Here, we demonstrate the analysis of commercial BaTiO3 particles embedded in a metallic matrix. Density-functional theory shows that a metallic coating prevents charge penetration of the electrostatic field, and thereby suppresses the associated volume associated change linked to the piezoelectric effect.
△ Less
Submitted 6 February, 2023;
originally announced February 2023.
-
The fate of water in hydrogen-based iron oxide reduction
Authors:
Ayman A. El-Zoka,
Leigh T. Stephenson,
Se-Ho Kim,
Baptiste Gault,
Dierk Raabe
Abstract:
Gas-solid reactions are cornerstones of many catalytic and redox processes that will underpin the energy and sustainability transition. The specific case of hydrogen-based iron oxide reduction is the foundation to render the global steel industry fossil-free, an essential target as iron production is the largest single industrial emitter of carbon dioxide. Our perception of gas-solid reactions has…
▽ More
Gas-solid reactions are cornerstones of many catalytic and redox processes that will underpin the energy and sustainability transition. The specific case of hydrogen-based iron oxide reduction is the foundation to render the global steel industry fossil-free, an essential target as iron production is the largest single industrial emitter of carbon dioxide. Our perception of gas-solid reactions has not only been limited by the availability of state-of-the-art techniques which can delve into the reacted solids in great structural and chemical detail, but we continue to miss an important reaction partner that defines the thermodynamics and kinetics of gas phase reactions: the gas molecules. In this investigation, we use the latest development in cryogenic atom probe tomography to study the quasi in-situ evolution of gas phase heavy water at iron-iron oxide interfaces resulting from the direct reduction of iron oxide by deuterium gas at 700°C. The findings provide new insights into the formation kinetics and location of water formed during hydrogen-based reduction of FeO, an its interaction with the ongoing redox reaction.
△ Less
Submitted 16 January, 2023;
originally announced January 2023.
-
Transmission Kikuchi diffraction mapping induces structural damage in atom probe specimens
Authors:
Baptiste Gault,
Heena Khanchandani,
T. S. Prithiv,
Stoichko Antonov,
T. Ben Britton
Abstract:
Measuring local chemistry of specific crystallographic features by atom probe tomography (APT) is facilitated by using transmission Kikuchi diffraction (TKD) to help position them sufficiently close to the apex of the needle-shaped specimen. However, possible structural damage associated to the energetic electrons used to perform TKD is rarely considered and is hence not well-understood. Here, in…
▽ More
Measuring local chemistry of specific crystallographic features by atom probe tomography (APT) is facilitated by using transmission Kikuchi diffraction (TKD) to help position them sufficiently close to the apex of the needle-shaped specimen. However, possible structural damage associated to the energetic electrons used to perform TKD is rarely considered and is hence not well-understood. Here, in two case studies, we evidence damage in APT specimens from TKD mapping. First, we analyze a solid solution, metastable \b{eta}-Ti-12Mo alloy, in which the Mo is expected to be homogenously distributed. Following TKD, APT reveals a planar segregation of Mo amongst other elements. Second, specimens were prepared near Σ3 twin boundaries in a high manganese twinning-induced plasticity steel, and subsequently charged with deuterium gas. Beyond a similar planar segregation, voids containing a high concentration of deuterium, i.e. bubbles, are detected in the specimen on which TKD was performed. Both examples showcase damage from TKD mapping leading to artefacts in the compositional distribution of solutes. We propose that the structural damage is created by surface species, including H and C, subjected to recoil from incoming energetic electrons during mapping, thereby getting implanted and causing cascades of structural damage in the sample.
△ Less
Submitted 23 January, 2023; v1 submitted 12 December, 2022;
originally announced December 2022.
-
Interstitial segregation has the potential to mitigate liquid metal embrittlement in iron
Authors:
Ali Ahmadian,
Daniel Scheiber,
Xuyang Zhou,
Baptiste Gault,
Reza Darvishi Kamachali,
Werner Ecker,
Lorenz Romaner,
Gerhard Dehm,
Christian H. Liebscher
Abstract:
The embrittlement of metallic alloys by liquid metals leads to catastrophic material failure and severely impacts their structural integrity. The weakening of grain boundaries by the ingress of liquid metal and preceding segregation in the solid are thought to promote early fracture. However, the potential of balancing between the segregation of cohesion-enhancing interstitial solutes and embrittl…
▽ More
The embrittlement of metallic alloys by liquid metals leads to catastrophic material failure and severely impacts their structural integrity. The weakening of grain boundaries by the ingress of liquid metal and preceding segregation in the solid are thought to promote early fracture. However, the potential of balancing between the segregation of cohesion-enhancing interstitial solutes and embrittling elements inducing grain boundary decohesion is not understood. Here, we unveil the mechanisms of how boron segregation mitigates the detrimental effects of the prime embrittler, zinc, in a $Σ5\,[0\,0\,1]$ tilt grain boundary in $α-$Fe ($4~at.\%$ Al). Zinc forms nanoscale segregation patterns inducing structurally and compositionally complex grain boundary states. Ab-initio simulations reveal that boron hinders zinc segregation and compensates for the zinc induced loss in grain boundary cohesion. Our work sheds new light on how interstitial solutes intimately modify grain boundaries, thereby opening pathways to use them as dopants for preventing disastrous material failure.
△ Less
Submitted 28 November, 2022;
originally announced November 2022.
-
Hydrogen embrittlement of twinning-induced plasticity steels: contribution of segregation to twin boundaries
Authors:
Heena Khanchandani,
Rolf Rolli,
Hans-Christian Schneider,
Christoph Kirchlechner,
Baptiste Gault
Abstract:
Metallic materials, especially steel, underpin transportation technologies. High-manganese twinning induced plasticity (TWIP) austenitic steels exhibit exceptional strength and ductility from twins, low-energy microstructural defects that form during plastic loading. Their high-strength could help light-weighting vehicles, and hence cut carbon emissions. TWIP steels are however very sensitive to h…
▽ More
Metallic materials, especially steel, underpin transportation technologies. High-manganese twinning induced plasticity (TWIP) austenitic steels exhibit exceptional strength and ductility from twins, low-energy microstructural defects that form during plastic loading. Their high-strength could help light-weighting vehicles, and hence cut carbon emissions. TWIP steels are however very sensitive to hydrogen embrittlement that causes dramatic losses of ductility and toughness leading to catastrophic failure of engineering parts. Here, we examine the atomic-scale chemistry and interaction of hydrogen with twin boundaries in a model TWIP steel by using isotope-labelled atom probe tomography, using tritium to avoid overlap with residual hydrogen. We reveal co-segregation of tritium and, unexpectedly, oxygen to coherent twin boundaries, and discuss their combined role in the embrittlement of these promising steels.
△ Less
Submitted 1 February, 2023; v1 submitted 17 November, 2022;
originally announced November 2022.
-
Atomic motifs govern the decoration of grain boundaries by interstitial solutes
Authors:
Xuyang Zhou,
Ali Ahmadian,
Baptiste Gault,
Colin Ophus,
Christian H. Liebscher,
Gerhard Dehm,
Dierk Raabe
Abstract:
Grain boundaries, the two-dimensional (2D) defects between differently oriented crystals, control mechanical and transport properties of materials. Our fundamental understanding of grain boundaries is still incomplete even after nearly a century and a half of research since Sorby first imaged grains. Here, we present a systematic study, over 9 orders of magnitude of size scales, in which we analyz…
▽ More
Grain boundaries, the two-dimensional (2D) defects between differently oriented crystals, control mechanical and transport properties of materials. Our fundamental understanding of grain boundaries is still incomplete even after nearly a century and a half of research since Sorby first imaged grains. Here, we present a systematic study, over 9 orders of magnitude of size scales, in which we analyze 2D defects between two neighboring crystals across five hierarchy levels and investigate their crystallographic, compositional, and electronic features. The levels are (a) the macroscale interface alignment and grain misorientation (held constant here); (b) the systematic mesoscopic change in the inclination of the grain boundary plane for the same orientation difference; (c) the facets, atomic motifs (structural units), and internal nanoscopic defects within the boundary plane; (d) the grain boundary chemistry; and (e) the electronic structure of the atomic motifs. As a model material, we use Fe alloyed with B and C, exploiting the strong interdependence of interface structure and chemistry in this system. This model system is the basis of the 1.9 billion tons of steel produced annually and has an eminent role as a catalyst. Surprisingly, we find that even a change in the inclination of the GB plane with identical misorientation impacts GB composition and atomic arrangement. Thus, it is the smallest structural hierarchical level, the atomic motifs, which control the most important chemical properties of the grain boundaries. This finding not only closes a missing link between the structure and chemical composition of such defects but also enables the targeted design and passivation of the chemical state of grain boundaries to free them from their role as entry gates for corrosion, hydrogen embrittlement, or mechanical failure.
△ Less
Submitted 21 November, 2022; v1 submitted 15 November, 2022;
originally announced November 2022.
-
In-situ sputtering from the micromanipulator to enable cryogenic preparation of specimens for atom probe tomography by focused-ion beam
Authors:
James O. Douglas,
Michele Conroy,
Finn Giuliani,
Baptiste Gault
Abstract:
Workflows have been developed in the past decade to enable atom probe tomography analysis at cryogenic temperatures. The inability to control the local deposition of the metallic precursor from the gas-injection system (GIS) at cryogenic temperature makes the preparation of site-specific specimens by using lift-out extremely challenging in the focused-ion beam. Schreiber et al. exploited redeposit…
▽ More
Workflows have been developed in the past decade to enable atom probe tomography analysis at cryogenic temperatures. The inability to control the local deposition of the metallic precursor from the gas-injection system (GIS) at cryogenic temperature makes the preparation of site-specific specimens by using lift-out extremely challenging in the focused-ion beam. Schreiber et al. exploited redeposition to weld the lifted-out sample to a support. Here we build on their approach to attach the region-of-interest and additionally strengthen the interface with locally sputtered metal from the micromanipulator. Following standard focused-ion beam annular milling, we demonstrate atom probe analysis of Si in both laser pulsing and voltage mode, with comparable analytical performance as a pre-sharpened microtip coupon. Our welding approach is versatile, as various metals could be used for sputtering, and allows similar flexibility as the GIS in principle.
△ Less
Submitted 13 November, 2022;
originally announced November 2022.
-
Chemical Partitioning at Crystalline Defects in PtAu as a Pathway to Stabilize Electrocatalysts
Authors:
Xuyang Zhou,
Olga Kasian,
Ting Luo,
Se-Ho Kim,
Chenyu Zhang,
Siyuan Zhang,
Subin Lee,
Gregory B. Thompson,
Gerhard Dehm,
Baptiste Gault,
Dierk Raabe
Abstract:
Dissolution of electrocatalysts during long-term and dynamic operation is a challenging problem in energy conversion and storage devices such as fuel cells and electrolyzers. To develop stable electrocatalysts, we adopt the design concept of segregation engineering, which uses solute segregation prone to electrochemical dissolution at internal defects, i.e., grain boundaries and dislocations. We s…
▽ More
Dissolution of electrocatalysts during long-term and dynamic operation is a challenging problem in energy conversion and storage devices such as fuel cells and electrolyzers. To develop stable electrocatalysts, we adopt the design concept of segregation engineering, which uses solute segregation prone to electrochemical dissolution at internal defects, i.e., grain boundaries and dislocations. We showcase the feasibility of this approach by stabilizing a model Pt catalyst with an addition of more noble Au (approximately 5 atomic percent). We characterized the defects' nanoscale structure and chemistry, and monitored the electrochemical dissolution of Pt and PtAu alloys by online inductively coupled plasma mass spectrometry. Once segregated to defects, Au atoms can stabilize and hence passivate the most vulnerable sites against electrochemical dissolution and improve the stability and longevity of the Pt electrocatalysts by more than an order of magnitude. This opens pathways to use solute segregation to defects for the development of more stable nanoscale electrocatalysts, a concept applicable for a wide range of catalytic systems.
△ Less
Submitted 27 September, 2022;
originally announced September 2022.
-
Tailoring negative pressure by crystal defects: Crack induced hydride formation in Al alloys
Authors:
A. Tehranchi,
P. Chakraborty,
M. L. Freixes,
E. McEniry,
B. Gault,
T. Hickel,
J. Neugebauer
Abstract:
Climate change motivates the search for non-carbon-emitting energy generation and storage solutions. Metal hydrides show promising characteristics for this purpose. They can be further stabilized by tailoring the negative pressure of microstructural and structural defects. Using systematic ab initio and atomistic simulations, we demonstrate that an enhancement in the formation of hydrides at the n…
▽ More
Climate change motivates the search for non-carbon-emitting energy generation and storage solutions. Metal hydrides show promising characteristics for this purpose. They can be further stabilized by tailoring the negative pressure of microstructural and structural defects. Using systematic ab initio and atomistic simulations, we demonstrate that an enhancement in the formation of hydrides at the negatively pressurized crack tip region is feasible by increasing the mechanical tensile load on the specimen. The theoretical predictions have been used to reassess and interpret atom probe tomography experiments for a high-strength 7XXX-aluminium alloy that show a substantial enhancement of hydrogen concentration at structural defects near a stress-corrosion crack tip. These results contain important implications for enhancing the capability of metals as H-storage materials.
△ Less
Submitted 20 September, 2022;
originally announced September 2022.
-
Effect of Sn on generalized stacking fault energy surfaces in zirconium and its hydrides
Authors:
P. Chakraborty,
I. Mouton,
B. Gault,
A. Tehranchi,
J. Neugebauer,
T. Hickel
Abstract:
Hydrogen embrittlement in Zr alloy fuel cladding is a primary safety concern for water based nuclear reactors. Here we investigated the stabilisation of planar defects within the forming hydrides by Sn, the primary alloying element of Zircaloy-4 used in the cladding. In order to explain formation of hydrides and planar defects observed in our experiments, we performed atomic-scale ab initio calcul…
▽ More
Hydrogen embrittlement in Zr alloy fuel cladding is a primary safety concern for water based nuclear reactors. Here we investigated the stabilisation of planar defects within the forming hydrides by Sn, the primary alloying element of Zircaloy-4 used in the cladding. In order to explain formation of hydrides and planar defects observed in our experiments, we performed atomic-scale ab initio calculations focusing on the solute interactions with generalized stacking faults in hcp $α$-Zr and fcc zirconium hydrides. Our calculations showed that an increase in Sn concentration leads to a stabilisation of stacking faults in both $α$-Zr and hydride phases. However, the solution enthalpy of Sn is lower in the $α$-Zr as compared to the other hydride phases indicative of two competing processes of Sn depletion/enrichment at the Zr hydride/matrix interface. This is corroborated by experimental findings, where Sn is repelled by hydrides and is mostly found trapped at interfaces and planar defects indicative of stacking faults inside the hydride phases. Our systematic investigation enables us to understand the presence and distribution of solutes in the hydride phases, which provides a deeper insight into the microstructural evolution of such alloy's properties during its service lifetime.
△ Less
Submitted 19 September, 2022;
originally announced September 2022.
-
Effect of Pore Formation on Redox-Driven Phase Transformation
Authors:
Xuyang Zhou,
Yang Bai,
Ayman A. El-Zoka,
Se-Ho Kim,
Yan Ma,
Christian H. Liebscher,
Baptiste Gault,
Jaber R. Mianroodi,
Gerhard Dehm,
Dierk Raabe
Abstract:
When solid-state redox-driven phase transformations are associated with mass loss, vacancies are produced that develop into pores. These pores can influence the kinetics of certain redox and phase transformation steps. We investigated the structural and chemical mechanisms in and at pores in a combined experimental-theoretical study, using the reduction of iron oxide by hydrogen as a model system.…
▽ More
When solid-state redox-driven phase transformations are associated with mass loss, vacancies are produced that develop into pores. These pores can influence the kinetics of certain redox and phase transformation steps. We investigated the structural and chemical mechanisms in and at pores in a combined experimental-theoretical study, using the reduction of iron oxide by hydrogen as a model system. The redox product (water) accumulates inside the pores and shifts the local equilibrium at the already reduced material back towards re-oxidation into cubic-Fe1-xO (where x refers to Fe deficiency, space group Fm3-m). This effect helps to understand the sluggish reduction of cubic-Fe1-xO by hydrogen, a key process for future sustainable steelmaking.
△ Less
Submitted 6 March, 2023; v1 submitted 19 September, 2022;
originally announced September 2022.
-
Ab initio vacancy formation energies and kinetics at metal surfaces under high electric field
Authors:
Shyam Katnagallu,
Christoph Freysoldt,
Baptiste Gault,
Jörg Neugebauer
Abstract:
Recording field ion microscope images under field evaporating conditions and subsequently reconstructing the underlying atomic configuration, called three-dimensional field ion microscopy (3D-FIM) is one of the few techniques capable of resolving crystalline defects at an atomic scale. However, the quantification of the observed vacancies and their origins are still a matter of debate. It was sugg…
▽ More
Recording field ion microscope images under field evaporating conditions and subsequently reconstructing the underlying atomic configuration, called three-dimensional field ion microscopy (3D-FIM) is one of the few techniques capable of resolving crystalline defects at an atomic scale. However, the quantification of the observed vacancies and their origins are still a matter of debate. It was suggested that high electric fields (1-5 V/Å) used in 3D-FIM could introduce artefact vacancies. To investigate such effects, we used density functional theory (DFT) simulations. Stepped Ni and Pt surfaces with kinks were modelled in the repeated slab approach with a (971) surface orientation. An electrostatic field of up to 4 V/Å was introduced on one side of the slab using the generalized dipole correction. Contrary to what was proposed, we show that the formation of vacancies on the electrified metal surface is more difficult compared to a field-free case. We also find that the electric field can introduce kinetic barriers to a potential vacancy-annihilation mechanism. We rationalize these findings by comparing to insights from field evaporation models.
△ Less
Submitted 14 September, 2022;
originally announced September 2022.
-
Sustainable steel through hydrogen plasma reduction of iron ore: process, kinetics, microstructure, chemistry
Authors:
I. R. Souza Filho,
Y. Ma,
M. Kulse,
D. Ponge,
B. Gault,
H. Springer,
D. Raabe
Abstract:
Fe- and steelmaking is the largest single industrial CO2 emitter, accounting for 6.5% of all CO2 emissions on the planet. This fact challenges the current technologies to achieve carbon-lean steel production and to align with the requirement of a drastic reduction of 80% in all CO2 emissions by around 2050. Thus, alternative reduction technologies have to be implemented for extracting iron from it…
▽ More
Fe- and steelmaking is the largest single industrial CO2 emitter, accounting for 6.5% of all CO2 emissions on the planet. This fact challenges the current technologies to achieve carbon-lean steel production and to align with the requirement of a drastic reduction of 80% in all CO2 emissions by around 2050. Thus, alternative reduction technologies have to be implemented for extracting iron from its ores. The H-based direct reduction has been explored as a sustainable route to mitigate CO2 emissions, where the reduction kinetics of the intermediate oxide product FexO wustite into Fe is the rate-limiting step of the process. The total reaction has an endothermic net energy balance. Reduction based on a H plasma may offer an attractive alternative. Here, we present a study about the reduction of hematite using H plasma. The evolution of both, chemical composition and phase transformations was investigated in several intermediate states. We found that hematite reduction kinetics depends on the balance between the initial input mass and the arc power. For an optimized input mass-arc power ratio, complete reduction was obtained within 15 min of exposure to the H plasma. The wustite reduction is also the rate-limiting step towards complete reduction. Nonetheless, the reduction reaction is exothermic, and its rates are comparable with those found in H-based direct reduction. Chemical and microstructure analysis revealed that the gangue elements partition to the remaining oxide regions, probed by energy dispersive spectroscopy and atom probe tomography. Si-enrichment was observed in the interdendritic fayalite domains, at the wustite/Fe hetero-interfaces and in the primarily solidified oxide particles inside the Fe. With proceeding reduction, however, such elements are gradually removed from the samples so that the final iron product is nearly free of gangue-related impurities.
△ Less
Submitted 1 August, 2022;
originally announced August 2022.
-
Atomic scale evolution of the surface chemistry in Li[Ni,Mn,Co]O2 cathode for Li-ion batteries stored in air
Authors:
Mahander P. Singh,
Se-Ho Kim,
Xuyang Zhou,
Hiram Kwak,
Stoichko Antonov,
Leonardo Shoji Aota,
Chanwon Jung,
Yoon Seok Jung,
Baptiste Gault
Abstract:
Layered LiMO2 (M = Ni, Co, Mn, and Al mixture) cathode materials used for Li-ion batteries are reputed to be highly reactive through their surface, where the chemistry changes rapidly when exposed to ambient air. However, conventional electron/spectroscopy-based techniques or thermogravimetric analysis fails to capture the underlying atom-scale chemistry of vulnerable Li species. To study the evol…
▽ More
Layered LiMO2 (M = Ni, Co, Mn, and Al mixture) cathode materials used for Li-ion batteries are reputed to be highly reactive through their surface, where the chemistry changes rapidly when exposed to ambient air. However, conventional electron/spectroscopy-based techniques or thermogravimetric analysis fails to capture the underlying atom-scale chemistry of vulnerable Li species. To study the evolution of the surface composition at the atomic scale, here we use atom probe tomography and probed the surface species formed during exposure of a LiNi0.8Mn0.1Co0.1O2 (NMC811) cathode material to air. The compositional analysis evidences the formation of Li2CO3. Site specific examination from a cracked region of an NMC811 particle also suggests the predominant presence of Li2CO3. These insights will help to design improved protocols for cathode synthesis and cell assembly, as well as critical knowledge for cathode degradation
△ Less
Submitted 25 July, 2022;
originally announced July 2022.
-
Understanding the degradation of a model Si-anode in Li-ion battery at the atomic-scale
Authors:
Se-Ho Kim,
Kang Dong,
Huan Zhao,
Ayman A. El-Zoka,
Xuyang Zhou,
Eric V. Woods,
Finn Giuliani,
Ingo Manke,
Dierk Raabe,
Baptiste Gault
Abstract:
Si-anodes have long been candidates thanks to an expected ten-fold increase in capacity compared to graphite. However, details of the mechanisms governing their degradation remain elusive, hindering science-guided development of long-lived Si-based anodes. Here we demonstrate how the latest developments in cryo-atom probe tomography enable the in-depth analysis of the electrode and electrolyte, an…
▽ More
Si-anodes have long been candidates thanks to an expected ten-fold increase in capacity compared to graphite. However, details of the mechanisms governing their degradation remain elusive, hindering science-guided development of long-lived Si-based anodes. Here we demonstrate how the latest developments in cryo-atom probe tomography enable the in-depth analysis of the electrode and electrolyte, and their interface at atomic-level.
△ Less
Submitted 17 July, 2022;
originally announced July 2022.
-
A mechanically strong and ductile soft magnet with extremely low coercivity
Authors:
Liuliu Han,
Fernando Maccari,
Isnaldi R. Souza Filho,
Nicolas J. Peter,
Ye Wei,
Baptiste Gault,
Oliver Gutfleisch,
Zhiming Li,
Dierk Raabe
Abstract:
Soft magnetic materials (SMMs) serve in electrical applications and sustainable energy supply, allowing magnetic flux variation in response to changes in applied magnetic field, at low energy loss1. The electrification of transport, households and manufacturing leads to an increase in energy consumption due to hysteresis losses2. Therefore, minimizing coercivity, which scales these losses, is cruc…
▽ More
Soft magnetic materials (SMMs) serve in electrical applications and sustainable energy supply, allowing magnetic flux variation in response to changes in applied magnetic field, at low energy loss1. The electrification of transport, households and manufacturing leads to an increase in energy consumption due to hysteresis losses2. Therefore, minimizing coercivity, which scales these losses, is crucial3. Yet, meeting this target alone is not enough: SMMs in electrical engines must withstand severe mechanical loads, i.e., the alloys need high strength and ductility4. This is a fundamental design challenge, as most methods that enhance strength introduce stress fields that can pin magnetic domains, thus increasing coercivity and hysteretic losses5. Here, we introduce an approach to overcome this dilemma. We have designed a Fe-Co-Ni-Ta-Al multicomponent alloy with ferromagnetic matrix and paramagnetic coherent nanoparticles (~91 nm size, ~55% volume fraction). They impede dislocation motion, enhancing strength and ductility. Their small size, low coherency and small magnetostatic energy create an interaction volume below the magnetic domain wall width, leading to minimal domain wall pinning, thus maintaining the soft magnetic properties. The alloy has a tensile strength of 1336 MPa at 54% tensile elongation, extremely low coercivity of 78 A/m (<1 Oe), moderate saturation magnetization of 100 Am2/kg, and high electrical resistivity of 103 μΩ u Ohm cm.
△ Less
Submitted 2 June, 2022;
originally announced July 2022.
-
Hydrogen-induced hardening of a high-manganese twinning induced plasticity steel
Authors:
Heena Khanchandani,
Dirk Ponge,
Stefan Zaefferer,
Baptiste Gault
Abstract:
High-manganese twinning-induced plasticity (TWIP) steels exhibit high strain hardening, high tensile strength, and high ductility, which make them attractive for structural applications. At low tensile strain rates, TWIP steels are prone to hydrogen embrittlement (HE). Here though, we study the hardening and strengthening resulting from electrochemical hydrogen-charging of a surface layer of a Fe-…
▽ More
High-manganese twinning-induced plasticity (TWIP) steels exhibit high strain hardening, high tensile strength, and high ductility, which make them attractive for structural applications. At low tensile strain rates, TWIP steels are prone to hydrogen embrittlement (HE). Here though, we study the hardening and strengthening resulting from electrochemical hydrogen-charging of a surface layer of a Fe-26.9Mn-0.28C (wt.%) TWIP steel. We observed a 20% increase in yield strength following the electrochemical hydrogen-charging, accompanied by a reduction in ductility from 75% to 10% at a tensile strain rate of 10-3s-1. The microstructural evolution during tensile deformation was examined at strain levels of 3%, 5% and 7% by electron backscatter diffraction (EBSD) and electron channeling contrast imaging (ECCI) to study the dislocation structure of the hardened region. As expected, the microstructure of the hydrogen-hardened and the uncharged regions of the material evolve differently. The uncharged areas show entangled dislocation structures, indicating slip from a limited number of potentially coplanar slip systems. In contrast, hydrogen segregated to the grain boundaries, revealed by the deuterium-labelled atom probe tomography, delays the dislocation nucleation by blocking dislocation sources at the grain boundaries. The charged areas hence first show the formation of cells, indicating dislocation entanglement from more non-coplanar slip systems. With increasing strain, these cells dissolve, and stacking faults and strain-induced ε-martensite are formed, promoted by the presence of hydrogen. The influence of hydrogen on dislocation structures and the overall deformation mechanism is discussed in details.
△ Less
Submitted 26 April, 2023; v1 submitted 2 May, 2022;
originally announced May 2022.
-
Revisiting in-depth chemical analysis for alkali ions-exchanged glass
Authors:
Se-Ho Kim,
Leigh T. Stephenson,
Torsten Schwarza,
Baptiste Gault
Abstract:
The upcoming flexible ultra-thin glass for foldable displays has attracted widespread attention as an alternative to rigid electronic smartphones. However, the detailed compositional effect of the chemical strengthening of the glass is not well understood. The spatially resolved chemistry and the depth of compression layer of tempered glass is far from being clear. In this study, commonly-used X-r…
▽ More
The upcoming flexible ultra-thin glass for foldable displays has attracted widespread attention as an alternative to rigid electronic smartphones. However, the detailed compositional effect of the chemical strengthening of the glass is not well understood. The spatially resolved chemistry and the depth of compression layer of tempered glass is far from being clear. In this study, commonly-used X-ray spectroscopy techniques and atom probe tomography (APT) were used comparatively to investigate the distribution of constituent elements in two representative smartphone glass samples: non-tempered and chemically-tempered glasses. Using APT, analysing the alkalis (Li, Na, K, Ca) that could impact the failure of the tempered glass was feasible at sub-nanoscale resolution; demonstrating that APT can be regarded as an alternative technique for imaging chemical distribution in glass for mobile applications.
△ Less
Submitted 30 March, 2022;
originally announced March 2022.