Showing 1–7 of 7 results for author: Douglas, J O

Towards establishing best practice in the analysis of hydrogen and deuterium by atom probe tomography

Authors: Baptiste Gault, Aparna Saksena, Xavier Sauvage, Paul Bagot, Leonardo S. Aota, Jonas Arlt, Lisa T. Belkacemi, Torben Boll, Yi-Sheng Chen, Luke Daly, Milos B. Djukic, James O. Douglas, Maria J. Duarte, Peter J. Felfer, Richard G. Forbes, Jing Fu, Hazel M. Gardner, Ryota Gemma, Stephan S. A. Gerstl, Yilun Gong, Guillaume Hachet, Severin Jakob, Benjamin M. Jenkins, Megan E. Jones, Heena Khanchandani , et al. (20 additional authors not shown)

Abstract: As hydrogen is touted as a key player in the decarbonization of modern society, it is critical to enable quantitative H analysis at high spatial resolution, if possible at the atomic scale. Indeed, H has a known deleterious impact on the mechanical properties (strength, ductility, toughness) of most materials that can hinder their use as part of the infrastructure of a hydrogen-based economy. Enab… ▽ More As hydrogen is touted as a key player in the decarbonization of modern society, it is critical to enable quantitative H analysis at high spatial resolution, if possible at the atomic scale. Indeed, H has a known deleterious impact on the mechanical properties (strength, ductility, toughness) of most materials that can hinder their use as part of the infrastructure of a hydrogen-based economy. Enabling H mapping, including local hydrogen concentration analyses at specific microstructural features, is essential for understanding the multiple ways that H affect the properties of materials, including for instance embrittlement mechanisms and their synergies, but also spatial mapping and quantification of hydrogen isotopes is essential to accurately predict tritium inventory of future fusion power plants, ensuring their safe and efficient operation for example. Atom probe tomography (APT) has the intrinsic capabilities for detecting hydrogen (H), and deuterium (D), and in principle the capacity for performing quantitative mapping of H within a material's microstructure. Yet the accuracy and precision of H analysis by APT remain affected by the influence of residual hydrogen from the ultra-high vacuum chamber that can obscure the signal of H from within the material, along with a complex field evaporation behavior. The present article reports the essence of discussions at a focused workshop held at the Max-Planck Institute for Sustainable Materials in April 2024. The workshop was organized to pave the way to establishing best practices in reporting APT data for the analysis of H. We first summarize the key aspects of the intricacies of H analysis by APT and propose a path for better reporting of the relevant data to support interpretation of APT-based H analysis in materials. △ Less

Submitted 21 May, 2024; originally announced May 2024.

Direct imaging of spatial heterogeneities in type II superconductors

Authors: Donald M. Evans, Michele Conroy, Lukas Puntigam, Dorina Croitori, Lilian Prodan, James O. Douglas, Baptiste Gault, Vladimir Tsurkan

Abstract: Understanding the exotic properties of quantum materials, including high-temperature superconductors, remains a formidable challenge that demands direct insights into electronic conductivity. Current methodologies either capture a bulk average or near-atomically-resolved information, missing direct measurements at the critical intermediate length scales. Here, using the superconductor Fe(Se,Te) as… ▽ More Understanding the exotic properties of quantum materials, including high-temperature superconductors, remains a formidable challenge that demands direct insights into electronic conductivity. Current methodologies either capture a bulk average or near-atomically-resolved information, missing direct measurements at the critical intermediate length scales. Here, using the superconductor Fe(Se,Te) as a model system, we use low-temperature conductive atomic force microscopy (cAFM) to bridge this gap. Contrary to the uniform superconductivity anticipated from bulk assessments, cAFM uncovers micron-scale conductive intrusions within a relatively insulating matrix. Subsequent compositional mapping through atom probe tomography, shows that differences in conductivity correlated with local changes in composition. cAFM, supported by advanced microscopy and microanalysis, represents a methodological breakthrough that can be used to navigate the intricate landscape of high-temperature superconductors and the broader realm of quantum materials. Such fundamental information is critical for theoretical understanding and future guided design. △ Less

Submitted 30 October, 2023; originally announced October 2023.

A versatile and reproducible cryo-sample preparation methodology for atom probe studies

Authors: Eric V. Woods, Mahander P. Singh, Se-Ho Kim, Tim M. Schwarz, James O. Douglas, Ayman El-Zoka, Finn Giulani, Baptiste Gault

Abstract: Repeatable and reliable site-specific preparation of specimens for atom probe tomography (APT) at cryogenic temperatures has proven challenging. A generalized workflow is required for cryogenic-specimen preparation including lift-out via focused-ion beam and in-situ deposition of capping layers, to strengthen specimens that will be exposed to high electric field and stresses during field evaporati… ▽ More Repeatable and reliable site-specific preparation of specimens for atom probe tomography (APT) at cryogenic temperatures has proven challenging. A generalized workflow is required for cryogenic-specimen preparation including lift-out via focused-ion beam and in-situ deposition of capping layers, to strengthen specimens that will be exposed to high electric field and stresses during field evaporation in APT, and protect them from environment during transfer into the atom probe. Here, we build on existing protocols, and showcase preparation and analysis of a variety of metals, oxides and supported frozen liquids and battery materials. We demonstrate reliable in-situ deposition of a metallic capping layer that significantly improve the atom probe data quality for challenging material systems, particularly battery cathode materials which are subjected to delithiation during the atom probe analysis itself. Our workflow designed is versatile and transferable widely to other instruments. △ Less

Submitted 31 March, 2023; originally announced March 2023.

Characterization of local deformation around hydrides in Zircaloy-4 using conventional and high angular resolution electron backscatter diffraction

Authors: Ruth M. Birch, James O. Douglas, T. Ben Britton

Abstract: Zircaloy-4 is used as a fuel cladding material for water reactors, as it has good mechanical properties, corrosion resistance, and a low thermal neutron absorption cross section. However, the mechanical performance of Zircaloy-4 can be reduced during service due to hydrogen uptake and hydride formation. These hydrides are brittle, and often reduce the strength and toughness of materials as well as… ▽ More Zircaloy-4 is used as a fuel cladding material for water reactors, as it has good mechanical properties, corrosion resistance, and a low thermal neutron absorption cross section. However, the mechanical performance of Zircaloy-4 can be reduced during service due to hydrogen uptake and hydride formation. These hydrides are brittle, and often reduce the strength and toughness of materials as well as increase susceptibility to delayed hydride cracking (DHC). In this work, large grain Zircaloy-4 with hydrides was prepared and then cross sectioned using cryo-ion beam polishing, using plasma focused ion beam (pFIB) and broad ion beam (BIB) approaches to enable the preparation of a very high quality flat surface with no preferential etching of either the hydride or zirconium metal (typically metallographic polishing preferentially removes hydrides). Conventional and high angular resolution electron backscatter diffraction (EBSD) analysis were then used to explore morphology, deformation fields, and orientation relationships between the zirconium matrix and hydrides. Four maps were collected for analysis which included hydrides near grain boundaries: (a) where the hydride smoothly decorates across two of the connecting boundaries near a triple junction; (b) where the hydride smoothly decorates the boundary; (c) a mixture of smooth decoration of the interface and protrusion into the grains; (d) fine scale hydride that protrudes into one grain. This work highlights that incompatibility of the hydride within the zirconium matrix is strongly linked to the orientation relationship of the hydride and matrix, and the grain boundary character. These results may enable enhanced understanding of the role of hydrides in fracture as well as stress-induced hydride reorientation and DHC susceptibility. △ Less

Submitted 14 March, 2023; originally announced March 2023.

Comments: as submitted

In-situ sputtering from the micromanipulator to enable cryogenic preparation of specimens for atom probe tomography by focused-ion beam

Authors: James O. Douglas, Michele Conroy, Finn Giuliani, Baptiste Gault

Abstract: Workflows have been developed in the past decade to enable atom probe tomography analysis at cryogenic temperatures. The inability to control the local deposition of the metallic precursor from the gas-injection system (GIS) at cryogenic temperature makes the preparation of site-specific specimens by using lift-out extremely challenging in the focused-ion beam. Schreiber et al. exploited redeposit… ▽ More Workflows have been developed in the past decade to enable atom probe tomography analysis at cryogenic temperatures. The inability to control the local deposition of the metallic precursor from the gas-injection system (GIS) at cryogenic temperature makes the preparation of site-specific specimens by using lift-out extremely challenging in the focused-ion beam. Schreiber et al. exploited redeposition to weld the lifted-out sample to a support. Here we build on their approach to attach the region-of-interest and additionally strengthen the interface with locally sputtered metal from the micromanipulator. Following standard focused-ion beam annular milling, we demonstrate atom probe analysis of Si in both laser pulsing and voltage mode, with comparable analytical performance as a pre-sharpened microtip coupon. Our welding approach is versatile, as various metals could be used for sputtering, and allows similar flexibility as the GIS in principle. △ Less

Submitted 13 November, 2022; originally announced November 2022.

Effect of alloying on the microstructure, phase stability, hardness and partitioning behavior of a new dual-superlattice nickel-based superalloy

Authors: C. Rodenkirchen, A. K. Ackerman, P. M. Mignanelli, A. Cliff, G. J. Wise, J. O. Douglas, P. A. J. Bagot, M. P. Moody, M. Appleton, M. P. Ryan, M. C. Hardy, S. Pedrazzini, H. J. Stone

Abstract: A novel y-y'-y" dual-superlattice superalloy, with promising mechanical properties up to elevated temperatures was recently reported. The present work employs state of the art chemical and spatial characterization techniques to study the effect systematic additions of Mo, W and Fe and variations in Nb and Al contents have on the phase fraction, thermal stability, elemental partitioning and mechani… ▽ More A novel y-y'-y" dual-superlattice superalloy, with promising mechanical properties up to elevated temperatures was recently reported. The present work employs state of the art chemical and spatial characterization techniques to study the effect systematic additions of Mo, W and Fe and variations in Nb and Al contents have on the phase fraction, thermal stability, elemental partitioning and mechanical properties. Alloys were produced through arc melting followed by heat treatment. Multi-scale characterization techniques and hardness testing were employed to characterize their microstructure, thermal stability and mechanical properties. Alterations in such properties or in elemental partitioning behaviour were then explained through thermodynamic modelling. A modest addition of 1.8 at.% Mo had a strong effect on the microstructure and thermal stability: it minimized microstructural coarsening during heat treatments while not significantly decreasing the y' solvus temperature. A reduction of Nb by 0.6 at.%, strongly reduced the y" volume fraction, without affecting the y' volume fraction. The reduced precipitate fraction led to a significant reduction in alloy hardness. Fe, added to achieve better processability and reduced material cost, decreased the y' solvus temperature and caused rapid microstructural coarsening during heat treatments, without affecting alloy hardness. A reduction of Al by 0.4 at.%, reduced the y' volume fraction and the y' solvus temperature, also without affecting alloy hardness. The addition of 0.9 at.% W decreased the y' solvus temperature but increased both precipitate volume fractions. These data will be invaluable to optimize current alloy design and to inform future alloy design efforts. △ Less

Submitted 19 September, 2022; originally announced September 2022.

Nano-scale imaging of the full strain tensor of specific dislocations extracted from a bulk sample

Authors: Felix Hofmann, Nicholas W. Phillips, Suchandrima Das, Phani Karamched, Gareth M. Hughes, James O. Douglas, Wonsuk Cha, Wenjun Liu

Abstract: Lattice defects play a key role in determining the properties of crystalline materials. Probing the 3D lattice strains that govern their interactions remains a challenge. Bragg Coherent Diffraction Imaging (BCDI) allows strain to be measured with nano-scale 3D resolution. However, it is currently limited to materials that form micro-crystals. Here we introduce a new technique that allows the manuf… ▽ More Lattice defects play a key role in determining the properties of crystalline materials. Probing the 3D lattice strains that govern their interactions remains a challenge. Bragg Coherent Diffraction Imaging (BCDI) allows strain to be measured with nano-scale 3D resolution. However, it is currently limited to materials that form micro-crystals. Here we introduce a new technique that allows the manufacture of BCDI samples from bulk materials. Using tungsten as an example, we show that focussed ion beam (FIB) machining can be used to extract, from macroscopic crystals, micron-sized BCDI samples containing specific pre-selected defects. To interpret the experimental data, we develop a new displacement-gradient-based analysis for multi-reflection BCDI. This allows accurate recovery of the full lattice strain tensor from samples containing multiple dislocations. These new capabilities open the door to BCDI as a microscopy tool for studying complex real-world materials. △ Less

Submitted 18 November, 2019; v1 submitted 10 March, 2019; originally announced March 2019.

Comments: 26 pages, 6 figures

Journal ref: Phys. Rev. Materials 4, 013801 (2020)