-
Microstructural and material property changes in severely deformed Eurofer-97
Authors:
Kay Song,
Guanze He,
Abdallah Reza,
Tamas Ungár,
Phani Karamched,
David Yang,
Ivan Tolkachev,
Kenichiro Mizohata,
David E J Armstrong,
Felix Hofmann
Abstract:
Severe plastic deformation changes the microstructure and properties of steels, which may be favourable for their use in structural components of nuclear reactors. In this study, high-pressure torsion (HPT) was used to refine the grain structure of Eurofer-97, a ferritic/ martensitic steel. Electron microscopy and X-ray diffraction were used to characterise the microstructural changes. Following H…
▽ More
Severe plastic deformation changes the microstructure and properties of steels, which may be favourable for their use in structural components of nuclear reactors. In this study, high-pressure torsion (HPT) was used to refine the grain structure of Eurofer-97, a ferritic/ martensitic steel. Electron microscopy and X-ray diffraction were used to characterise the microstructural changes. Following HPT, the average grain size reduced by a factor of $\sim$ 30, with a marked increase in high-angle grain boundaries. Dislocation density also increased by more than one order of magnitude. The thermal stability of the deformed material was investigated via in-situ annealing during synchrotron X-ray diffraction. This revealed substantial recovery between 450 K - 800 K. Irradiation with 20 MeV Fe-ions to $\sim$ 0.1 dpa caused a 20% reduction in dislocation density compared to the as-deformed material. However, HPT deformation prior to irradiation did not have a significant effect in mitigating the irradiation-induced reductions in thermal diffusivity and surface acoustic wave velocity of the material. These results provide a multi-faceted understanding of the changes in ferritic/martensitic steels due to severe plastic deformation, and how these changes can be used to alter material properties.
△ Less
Submitted 15 August, 2023;
originally announced August 2023.
-
Elastic Strain Associated with Irradiation-Induced Defects in Self-ion Irradiated Tungsten
Authors:
Guanze He,
Hongbing Yu,
Phani Karamched,
Junliang Liu,
Felix Hofmann
Abstract:
Elastic interactions play an important role in controlling irradiation damage evolution, but remain largely unexplored experimentally. Using transmission electron microscopy (TEM) and high-resolution on-axis transmission Kikuchi diffraction (HR-TKD), we correlate the evolution of irradiation-induced damage structures and the associated lattice strains in self-ion irradiated pure tungsten. TEM reve…
▽ More
Elastic interactions play an important role in controlling irradiation damage evolution, but remain largely unexplored experimentally. Using transmission electron microscopy (TEM) and high-resolution on-axis transmission Kikuchi diffraction (HR-TKD), we correlate the evolution of irradiation-induced damage structures and the associated lattice strains in self-ion irradiated pure tungsten. TEM reveals different dislocation loop structures as a function of sample thickness, suggesting that free surfaces limit the formation of extended defect structures found in thicker samples. HR-TKD strain analysis shows the formation of crystallographically-orientated long-range strain fluctuation above 0.01 dpa and a decrease of total elastic energy above 0.1 dpa.
△ Less
Submitted 18 November, 2022;
originally announced November 2022.
-
Macroscopic analysis of time dependent plasticity in Ti alloys
Authors:
Yi Xiong,
Phani S. Karamched,
Chi-Toan Nguyen,
David M. Collins,
Christopher M. Magazzeni,
Edmund Tarleton,
Angus J. Wilkinson
Abstract:
Component failure due to cold dwell fatigue of titanium and its alloys is a long-standing problem which has significant safety and economic implications to the aviation industry. This can be addressed by understanding the governing mechanisms of time dependent plasticity behaviour of Ti at low temperatures. Here, stress relaxation tests were performed at four different temperatures on three major…
▽ More
Component failure due to cold dwell fatigue of titanium and its alloys is a long-standing problem which has significant safety and economic implications to the aviation industry. This can be addressed by understanding the governing mechanisms of time dependent plasticity behaviour of Ti at low temperatures. Here, stress relaxation tests were performed at four different temperatures on three major alloy systems: commercially pure titanium (two alloys with different oxygen content), Ti-6Al-4V (two microstructures with differing beta phase fractions) and Ti-6Al-2Sn-4Zr-xMo (two alloys with different Mo content x= 2 or 6, and portion of beta phase). Key parameters controlling the time dependent plasticity were determined as a function of temperature. Both activation volume and energy were found to increase with temperature in all six alloys. It was found that the dwell fatigue effect is more significant by oxygen alloying but is suppressed by the addition of Mo. The presence of the beta phase did not strongly affect the dwell fatigue, however, it was suppressed at high temperature due to the low strain rate and strain rate sensitivity.
△ Less
Submitted 12 April, 2022;
originally announced April 2022.
-
Deformation Behaviour of Ion-Irradiated FeCr: A Nanoindentation Study
Authors:
Kay Song,
Hongbing Yu,
Phani Karamched,
Kenichiro Mizohata,
David Armstrong,
Felix Hofmann
Abstract:
Understanding the mechanisms of plasticity in structural steels is essential for the operation of next-generation fusion reactors. Elemental composition, particularly the amount of Cr present, and irradiation can have separate and synergistic effects on the mechanical properties of ferritic/martensitic steels. The study of ion-irradiated FeCr alloys is useful for gaining a mechanistic understandin…
▽ More
Understanding the mechanisms of plasticity in structural steels is essential for the operation of next-generation fusion reactors. Elemental composition, particularly the amount of Cr present, and irradiation can have separate and synergistic effects on the mechanical properties of ferritic/martensitic steels. The study of ion-irradiated FeCr alloys is useful for gaining a mechanistic understanding of irradiation damage in steels. Previous studies of ion-irradiated FeCr did not clearly distinguish between the nucleation of dislocations to initiate plasticity, and their propagation through the material as plasticity progresses.
In this study, Fe3Cr, Fe5Cr, and Fe10Cr were irradiated with 20 MeV Fe$^{3+}$ ions at room temperature to nominal doses of 0.01 dpa and 0.1 dpa. Nanoindentation was carried out with Berkovich and spherical indenter tips to study the nucleation of dislocations and their subsequent propagation. The presence of irradiation-induced defects reduced the theoretical shear stress and barrier for dislocation nucleation. The presence of Cr further enhanced this effect due to increased retention of irradiation defects. However, this combined effect is still small compared to dislocation nucleation from pre-existing sources such as Frank-Read sources and grain boundaries. The yield strength, an indicator of dislocation mobility, of FeCr increased with irradiation damage and Cr. The increased retention of irradiation defects due to the presence of Cr also further increased the yield strength. Reduced work hardening capacity was also observed following irradiation. The synergistic effects of Cr and irradiation damage in FeCr appear to be more important for the propagation of dislocations, rather than their nucleation.
△ Less
Submitted 19 July, 2021;
originally announced July 2021.
-
Cold dwell behaviour of Ti$_6$Al alloy: Understanding load shedding using digital image correlation and crystal plasticity simulations
Authors:
Yi Xiong,
Nicolo Grilli,
Phani S. Karamched,
Bo-Shiuan Li,
Edmund Tarleton,
Angus J. Wilkinson
Abstract:
Digital image correlation (DIC) and crystal plasticity simulation were utilised to study cold dwell behaviour in a coarse grain Ti-6Al alloy at 3 different temperatures up to 230 C. Strains extracted from large volume grains were measured during creep by DIC and were used to calibrate the crystal plasticity model. The values of critical resolved shear stresses (CRSS) of the two main slip systems (…
▽ More
Digital image correlation (DIC) and crystal plasticity simulation were utilised to study cold dwell behaviour in a coarse grain Ti-6Al alloy at 3 different temperatures up to 230 C. Strains extracted from large volume grains were measured during creep by DIC and were used to calibrate the crystal plasticity model. The values of critical resolved shear stresses (CRSS) of the two main slip systems (basal and prismatic) were determined as a function of temperature. Stress along paths across the boundaries of two grain pairs, (1) a `rogue' grain pair and (2) a `non-rogue' grain pair, were determined at different temperatures. Load shedding was observed in the `rogue' grain pair, where a stress increment during the creep period was found in the `hard' grain. At elevated temperatures, 120 C was found to be the worst-case scenario as the stress difference at the grain boundaries of these two grain pairs were found to be the largest among the three temperatures. This can be attributed to the fact that the strain rate sensitivity of both prismatic and basal slip systems is at its greatest in this worst-case scenario temperature.
△ Less
Submitted 23 June, 2021;
originally announced June 2021.
-
An in-situ synchrotron diffraction study of stress relaxation in titanium: Effect of temperature and oxygen on cold dwell fatigue
Authors:
Yi Xiong,
Phani S. Karamched,
Chi-Toan Nguyen,
David M. Collins,
Nicolo Grilli,
Christopher M. Magazzeni,
Edmund Tarleton,
Angus J. Wilkinson
Abstract:
There is a long-standing technological problem in which a stress dwell during cyclic loading at room temperature in Ti causes a significant fatigue life reduction. It is thought that localised time dependent plasticity in soft grains favourably oriented for easy plastic slip leads to load shedding and an increase in stress within a neighbouring hard grain poorly oriented for easy slip. Quantifying…
▽ More
There is a long-standing technological problem in which a stress dwell during cyclic loading at room temperature in Ti causes a significant fatigue life reduction. It is thought that localised time dependent plasticity in soft grains favourably oriented for easy plastic slip leads to load shedding and an increase in stress within a neighbouring hard grain poorly oriented for easy slip. Quantifying this time dependent plasticity process is key to understand the complex cold dwell fatigue problem. Knowing the effect of operating temperature and oxygen content on cold dwell fatigue will be beneficial for future alloy design to address this problem. In this work, synchrotron X-ray diffraction during stress relaxation experiments was used to characterise the time dependent plastic behaviour of two commercially pure titanium samples (grade 1 and grade 4) with different oxygen content at 4 different temperatures (room temperature, 75C, 145C and 250C). Lattice strains were measured by tracking the diffraction peak shift from multiple crystallographic plane families (21 diffraction rings) as a function of their orientation with respect to the loading direction. Critical resolved shear stress, activation energy and activation volume were established for both prismatic and basal slip as a function of temperature and oxygen content by fitting a crystal plasticity finite element model to the lattice strain relaxation responses measured along the loading axis for five strong reflections. Higher strain rate sensitivity was found to lead to higher plasticity during cold dwell.
△ Less
Submitted 19 November, 2020;
originally announced November 2020.
-
Ultra high-temperature deformation in a single crystal superalloy: Meso-scale process simulation and micro-mechanisms
Authors:
Yuanbo T. Tang,
Neil D'Souza,
Bryan Roebuck,
Phani Karamched,
Chinnapat Panwisawas,
David M. Collins
Abstract:
A mesoscale study of a single crystal nickel-base superalloy subjected to an industrially relevant process simulation has revealed the complex interplay between microstructural development and the micromechanical behaviour. As sample gauge volumes were smaller than the length scale of the highly cored structure of the parent material from which they were produced, their subtle composition differen…
▽ More
A mesoscale study of a single crystal nickel-base superalloy subjected to an industrially relevant process simulation has revealed the complex interplay between microstructural development and the micromechanical behaviour. As sample gauge volumes were smaller than the length scale of the highly cored structure of the parent material from which they were produced, their subtle composition differences gave rise to differing work hardening rates, influenced by varying secondary dendrite arm spacings, gamma-prime phase solvus temperatures and a topologically inverted gamma/gamma-prime microstructure. The gamma-prime precipitates possessed a characteristic `X' morphology, resulting from the simultaneously active solute transport mechanisms of thermally favoured octodendritic growth and N-type rafting, indicating creep-type mechanisms were prevalent. High resolution-electron backscatter diffraction (HR-EBSD) characterisation reveals deformation patterning that follows the gamma/gamma-prime microstructure, with high geometrically necessary dislocation density fields localised to the gamma/gamma-prime interfaces; Orowan looping is evidently the mechanism that mediated plasticity. Examination of the residual elastic stresses indicated the `X' gamma-prime precipitate morphology had significantly enhanced the deformation heterogeneity, resulting in stress states within the gamma channels that favour slip, and that encourage further growth of gamma-prime precipitate protrusions. The combination of such localised plasticity and residual stresses are considered to be critical in the formation of the recrystallisation defect in subsequent post-casting homogenisation heat treatments.
△ Less
Submitted 17 August, 2020;
originally announced August 2020.
-
Orientation dependence of the nano-indentation behaviour of pure tungsten
Authors:
Hongbing Yu,
Suchandrima Das,
Haiyang Yu,
Phani Karamched,
Edmund Tarleton,
Felix Hofmann
Abstract:
Coupling of nano-indentation and crystal plasticity finite element (CPFE) simulations is widely used to quantitatively probe the small-scale mechanical behaviour of materials. Earlier studies showed that CPFE can successfully reproduce the load-displacement curves and surface morphology for different crystal orientations. Here, we report the orientation dependence of residual lattice strain patter…
▽ More
Coupling of nano-indentation and crystal plasticity finite element (CPFE) simulations is widely used to quantitatively probe the small-scale mechanical behaviour of materials. Earlier studies showed that CPFE can successfully reproduce the load-displacement curves and surface morphology for different crystal orientations. Here, we report the orientation dependence of residual lattice strain patterns and dislocation structures in tungsten. For orientations with one or more Burgers vectors close to parallel to the sample surface, dislocation movement and residual lattice strains are confined to long, narrow channels. CPFE is unable to reproduce this behaviour, and our analysis reveals the responsible underlying mechanisms.
△ Less
Submitted 8 August, 2020; v1 submitted 30 July, 2020;
originally announced July 2020.
-
Non-destructive study of collision cascade damage in self-ion irradiated tungsten using HR-EBSD and ECCI
Authors:
Hongbing Yu,
Phani Karamched,
Suchandrima Das,
Junliang Liu,
Kenichiro Mizohata,
Felix Hofmann
Abstract:
Understanding defect production and evolution under irradiation is a long-standing multi-scale problem. Conventionally, experimental examination of irradiation-induced defects (IIDs) has mainly relied on transmission electron microscopy (TEM), which offers high spatial resolution but requires destructive sample preparation. Furthermore, limited field of view and low strain sensitivity make multi-s…
▽ More
Understanding defect production and evolution under irradiation is a long-standing multi-scale problem. Conventionally, experimental examination of irradiation-induced defects (IIDs) has mainly relied on transmission electron microscopy (TEM), which offers high spatial resolution but requires destructive sample preparation. Furthermore, limited field of view and low strain sensitivity make multi-scale characterisation and quantitative strain measurements difficult. Here we explore the potential of using advanced techniques in the scanning electron microscope (SEM) to non-destructively probe irradiation damage at the surface of bulk materials. Electron channelling contrast imaging (ECCI) is used to image nano-scale irradiation-induced defects in 20 MeV self-ion irradiated tungsten, the main candidate material for fusion reactor armour. The results show an evolution of the damage microstructure from uniformly and randomly distributed nano-scale defects at 0.01 dpa (displacement per atom) to string structures extending over hundreds of nanometres at 1 dpa. Cross-correlation based high-resolution EBSD (HR-EBSD) is used to probe the lattice strain fields associated with IIDs. While there is little strain fluctuation at 0.01 dpa, significant heterogeneity in the lattice strains is observed at 0.1 dpa, increasing with dose until saturation at 0.32 dpa. The characteristic length scale of strain fluctuations is ~500 nm. Together, ECCI and HR-EBSD reveal a transition from a structure where defects are disordered to a structure with long-range order driven by elastic interactions between pre-existing defects and new cascade damage. This study demonstrates that SEM provides an attractive tool for rapid throughput, non-destructive, multi-scale and multi-aspect characterisation of irradiation damage.
△ Less
Submitted 8 August, 2020; v1 submitted 19 May, 2020;
originally announced May 2020.
-
Using local GND density to study SCC initiation
Authors:
Naganand Saravanan,
Phani S Karamched,
Junliang Liu,
Claire Rainasse,
Fabio Scenini,
Sergio Lozano-Perez
Abstract:
In this work, strain and geometric necessary dislocations (GNDs) have been mapped with nm-resolution around grain boundaries affected by stress corrosion cracking (SCC) or intergranular oxidation with the aim of clarifying which local conditions trigger SCC initiation.
In this work, strain and geometric necessary dislocations (GNDs) have been mapped with nm-resolution around grain boundaries affected by stress corrosion cracking (SCC) or intergranular oxidation with the aim of clarifying which local conditions trigger SCC initiation.
△ Less
Submitted 25 June, 2020; v1 submitted 4 May, 2020;
originally announced May 2020.
-
Grain Boundary Serration in Nickel Alloy Inconel 600: Quantification and Mechanisms
Authors:
Yuanbo T. Tang,
Phani Karamched,
Junliang Liu,
Jack C. Haley,
Roger C. Reed,
Angus J. Wilkinson
Abstract:
The serration of grain boundaries in Inconel 600 caused by heat treatment is studied systematically. A new method based on Fourier transforms is used to analyse the multiple wave-like character of the serrated grain boundaries. A new metric -- the serration index -- is devised and utilised to quantify the degree of serration and more generally to distinguish objectively between serrated and non-se…
▽ More
The serration of grain boundaries in Inconel 600 caused by heat treatment is studied systematically. A new method based on Fourier transforms is used to analyse the multiple wave-like character of the serrated grain boundaries. A new metric -- the serration index -- is devised and utilised to quantify the degree of serration and more generally to distinguish objectively between serrated and non-serrated boundaries. By considering the variation of the serration index with processing parameters, a causal relationship between degree of serration and solution treatment/cooling rate is elucidated. Processing maps for the degree of serration are presented. Two distinct formation mechanisms arise which rely upon grain boundary interaction with carbides: (i) Zener-type dragging which hinders grain boundary migration and (ii) a faceted carbide growth-induced serration.
△ Less
Submitted 27 March, 2020;
originally announced March 2020.
-
Cold Creep of Titanium: Analysis of stress relaxation using synchrotron diffraction and crystal plasticity simulations
Authors:
Yi Xiong,
Phani Karamched,
Chi-Toan Nguyen,
David M Collins,
Christopher M Magazzeni,
Edmund Tarleton,
Angus J Wilkinson
Abstract:
There is a long standing technological problem in which a stress dwell during cyclic loading at room temperature in Ti causes a significant fatigue life reduction. It is thought that localised time dependent plasticity in soft grains oriented for easy plastic slip leads to load shedding and an increase in stress within a neighbouring hard grain poorly oriented for easy slip. Quantifying this time…
▽ More
There is a long standing technological problem in which a stress dwell during cyclic loading at room temperature in Ti causes a significant fatigue life reduction. It is thought that localised time dependent plasticity in soft grains oriented for easy plastic slip leads to load shedding and an increase in stress within a neighbouring hard grain poorly oriented for easy slip. Quantifying this time dependent plasticity process is key to successfully predicting the complex cold dwell fatigue problem. This work uses a novel approach of in situ synchrotron X-ray diffraction during stress relaxation tests, to quantify the time dependent plasticity. Measured lattice strains from multiple lattice families (21 diffraction rings) were compared with simulated lattice strains from crystal plasticity finite element (CPFE) simulations. The prism slip parameters were found to show stronger strain rate sensitivity compared to basal slip, and this has a significant effect on stress redistribution to hard grain orientations during cold creep.
△ Less
Submitted 24 August, 2020; v1 submitted 3 March, 2020;
originally announced March 2020.
-
Forescattered electron imaging of nanoparticles in a scanning electron microscopy
Authors:
Junliang Liu,
Sergio Lozano-Perez,
Phani Karamched,
Jennifer Holter,
Angus J. Wilkinson,
Chris R. M. Grovenor
Abstract:
In this study, we have used a Zr-Nb alloy containing well-defined nano-precipitates as a model material in which to study imaging contrast inversions (atomic number or diffraction contrast) observed with the forescattered electron imaging system, ARGUSTM, in a scanning electron microscope (SEM) when imaging a thin foil in a transmission geometry. The study is based on Monte Carlo simulations and a…
▽ More
In this study, we have used a Zr-Nb alloy containing well-defined nano-precipitates as a model material in which to study imaging contrast inversions (atomic number or diffraction contrast) observed with the forescattered electron imaging system, ARGUSTM, in a scanning electron microscope (SEM) when imaging a thin foil in a transmission geometry. The study is based on Monte Carlo simulations and analysis of micrographs experimentally acquired under different imaging conditions. Based on the results, imaging conditions that enhance atomic number or diffraction contrast have been proposed. Data acquired from the ARGUSTM imaging system in SEM has also been compared with results from standard transmission electron microscopy and scanning transmission electron microscopy imaging of the same material. These results demonstrate the capability of the ARGUSTM system to investigate microstructures in nano-scale materials.
△ Less
Submitted 11 April, 2019;
originally announced April 2019.
-
Nano-scale imaging of the full strain tensor of specific dislocations extracted from a bulk sample
Authors:
Felix Hofmann,
Nicholas W. Phillips,
Suchandrima Das,
Phani Karamched,
Gareth M. Hughes,
James O. Douglas,
Wonsuk Cha,
Wenjun Liu
Abstract:
Lattice defects play a key role in determining the properties of crystalline materials. Probing the 3D lattice strains that govern their interactions remains a challenge. Bragg Coherent Diffraction Imaging (BCDI) allows strain to be measured with nano-scale 3D resolution. However, it is currently limited to materials that form micro-crystals. Here we introduce a new technique that allows the manuf…
▽ More
Lattice defects play a key role in determining the properties of crystalline materials. Probing the 3D lattice strains that govern their interactions remains a challenge. Bragg Coherent Diffraction Imaging (BCDI) allows strain to be measured with nano-scale 3D resolution. However, it is currently limited to materials that form micro-crystals. Here we introduce a new technique that allows the manufacture of BCDI samples from bulk materials. Using tungsten as an example, we show that focussed ion beam (FIB) machining can be used to extract, from macroscopic crystals, micron-sized BCDI samples containing specific pre-selected defects. To interpret the experimental data, we develop a new displacement-gradient-based analysis for multi-reflection BCDI. This allows accurate recovery of the full lattice strain tensor from samples containing multiple dislocations. These new capabilities open the door to BCDI as a microscopy tool for studying complex real-world materials.
△ Less
Submitted 18 November, 2019; v1 submitted 10 March, 2019;
originally announced March 2019.
-
Mapping the full lattice strain tensor of a single dislocation by High Angular Resolution Transmission Kikuchi Diffraction (HR-TKD)
Authors:
Hongbing Yu,
Junliang Liu,
Phani Karamched,
Angus J. Wilkinson,
Felix Hofmann
Abstract:
The full lattice strain tensor and lattice rotations induced by a dislocation in pure tungsten were mapped using high-resolution transmission Kikuchi diffraction (HR-TKD) in a SEM. The HR-TKD measurement agrees very well with a forward calculation using an elastically isotropic model of the dislocation and its Burgers vector. Our results demonstrate that the spatial and angular resolution of HR-TK…
▽ More
The full lattice strain tensor and lattice rotations induced by a dislocation in pure tungsten were mapped using high-resolution transmission Kikuchi diffraction (HR-TKD) in a SEM. The HR-TKD measurement agrees very well with a forward calculation using an elastically isotropic model of the dislocation and its Burgers vector. Our results demonstrate that the spatial and angular resolution of HR-TKD in SEM is sufficiently high to resolve the details of lattice distortions near individual dislocations. This capability opens a number of new interesting opportunities, for example determining the Burgers vector of an unknown dislocation in a fast and straightforward way.
△ Less
Submitted 29 August, 2018;
originally announced August 2018.