Showing 1–50 of 60 results for author: Hofmann, F

Simulated TEM imaging of a heavily irradiated metal

Authors: D. R. Mason, M. Boleininger, J. Haley, E. Prestat, G. He, F. Hofmann, S. L. Dudarev

Abstract: We recast the Howie-Whelan equations for generating simulated transmission electron microscope (TEM) images, replacing the dependence on local atomic displacements with atomic positions only. This allows very rapid computation of simulated TEM images for arbitrarily complex atomistic configurations of lattice defects and dislocations in the dynamical two beam approximation. Large scale massively-o… ▽ More We recast the Howie-Whelan equations for generating simulated transmission electron microscope (TEM) images, replacing the dependence on local atomic displacements with atomic positions only. This allows very rapid computation of simulated TEM images for arbitrarily complex atomistic configurations of lattice defects and dislocations in the dynamical two beam approximation. Large scale massively-overlapping cascade simulations performed with molecular dynamics, are used to generate representative high-dose nanoscale irradiation damage in tungsten at room temperature, and we compare the simulated TEM images to experimental TEM images with similar irradiation and imaging conditions. The simulated TEM shows 'white-dot' damage in weak-beam dark-field imaging conditions, in line with our experimental observations and as expected from previous studies, and in bright-field conditions a dislocation network is observed. In this work we can also compare the images to the nanoscale lattice defects in the original atomic structures, and find that at high dose the white spots are not only created by small dislocation loops, but rather arise from nanoscale fluctuations in strains around curved sections of dislocation lines. △ Less

Submitted 26 January, 2024; originally announced January 2024.

Single-exposure elemental differentiation and texture-sensitive phase-retrieval imaging with a neutron counting micro-channel plate detector

Authors: Benedicta D. Arhatari, David M. Paganin, Henry Kirkwood, Anton S. Tremsin, Timur E. Gureyev, Alexander M. Korsunsky, Winfried Kockelmann, Felix Hofmann, Eric Huwald, Shu-Yan Zhang, Joe Kelleher, Brian Abbey

Abstract: Micro-channel plate (MCP) detectors, when used at pulsed-neutron-source instruments, offer the possibility of high spatial resolution and high contrast imaging with pixel-level spectroscopic information. Here we demonstrate the possibility of multimodal analysis including total neutron cross-section spectra measurements, quantitative material differentiation imaging and texture-sensitive in-line p… ▽ More Micro-channel plate (MCP) detectors, when used at pulsed-neutron-source instruments, offer the possibility of high spatial resolution and high contrast imaging with pixel-level spectroscopic information. Here we demonstrate the possibility of multimodal analysis including total neutron cross-section spectra measurements, quantitative material differentiation imaging and texture-sensitive in-line phase imaging, from a single exposure using an MCP detector. This multimodal approach operates in full-field imaging mode, with the neutron transmission spectra acquired at each individual detector pixel. Due to the polychromatic nature of the beam and spectroscopic resolving capability of the detector, no energy scanning is required. Good agreement with the library reference data is demonstrated for neutron cross-section spectra measurements. Two different images corresponding to two selected energy bandwidths are used for elemental differentiation imaging. Moreover, the presence of changes in texture, i.e., preferred grain orientation, in the sample is identified from our phase-retrieval imaging results. △ Less

Submitted 27 April, 2024; v1 submitted 8 November, 2023; originally announced November 2023.

Comments: Revised manuscript resubmitted to Physical Review A

Journal ref: Physical Review A 109, 053529 (2024)

Deformation Localisation in Ion-Irradiated FeCr

Authors: Kay Song, Dina Sheyfer, Wenjun Liu, Jonathan Z Tischler, Suchandrima Das, Kenichiro Mizohata, Hongbing Yu, David E J Armstrong, Felix Hofmann

Abstract: Irradiation-induced ductility loss is a major concern facing structural steels in next-generation nuclear reactors. Currently, the mechanisms for this are unclear but crucial to address for the design of reactor components. Here, the deformation characteristics around nanoindents in Fe and Fe10Cr irradiated with Fe ions to $\sim$1 displacement-per-atom at 313 K are non-destructively studied. Defor… ▽ More Irradiation-induced ductility loss is a major concern facing structural steels in next-generation nuclear reactors. Currently, the mechanisms for this are unclear but crucial to address for the design of reactor components. Here, the deformation characteristics around nanoindents in Fe and Fe10Cr irradiated with Fe ions to $\sim$1 displacement-per-atom at 313 K are non-destructively studied. Deformation localisation in the irradiated materials is evident from the increased pile-up height and slip step formation, measured by atomic force microscopy. From 3D X-ray Laue diffraction, measurements of lattice rotation and strain fields near the indent site show a large confinement, over 85%, of plasticity in the irradiated material. We find that despite causing increased irradiation hardening, Cr content has little effect on the irradiation-induced changes in pile-up topography and deformation fields. The results demonstrate that varying Cr content in steels has limited impact on retaining strain hardening capacity and reducing irradiation-induced embrittlement. △ Less

Submitted 2 October, 2023; originally announced October 2023.

Comments: 23 pages, 9 figures (1 graphical abstract, 4 figures in main text, 4 figures in supplementary file)

Simulations of Nanocrystalline Iron Formation under High Shear Strain

Authors: Ivan Tolkachev, Pui-Wai Ma, Felix Hofmann

Abstract: High-shear methods have long been used in experiments to refine grain structures in metals, yet the underlying mechanisms remain elusive. We demonstrate a refinement process using molecular dynamic simulations, wherein nanocrystalline structures are generated from initially perfect lattices under high-shear strain. The simulation cells undergo a highly disordered state, followed by recrystallizati… ▽ More High-shear methods have long been used in experiments to refine grain structures in metals, yet the underlying mechanisms remain elusive. We demonstrate a refinement process using molecular dynamic simulations, wherein nanocrystalline structures are generated from initially perfect lattices under high-shear strain. The simulation cells undergo a highly disordered state, followed by recrystallization and grain coarsening, resulting in nanograins. We explore the dependence on parameters such as temperature, heat dissipation rate, shear strain rate, and carbon impurity concentration. Higher temperatures lead to the formation of larger and longer grains. The faster heat dissipation sample initially yields more small grains, but their number subsequently reduces, and is lower than the slower heat dissipation sample at approximately 1.5 strain. Slower strain rates do not promote nanograin formation. The presence of carbon impurities appears to have little effect on grain formation. This detailed analysis affords insight into the mechanisms that control the formation of nanograins under high-shear conditions. △ Less

Submitted 29 September, 2023; originally announced September 2023.

Microstructural and material property changes in severely deformed Eurofer-97

Authors: Kay Song, Guanze He, Abdallah Reza, Tamas Ungár, Phani Karamched, David Yang, Ivan Tolkachev, Kenichiro Mizohata, David E J Armstrong, Felix Hofmann

Abstract: Severe plastic deformation changes the microstructure and properties of steels, which may be favourable for their use in structural components of nuclear reactors. In this study, high-pressure torsion (HPT) was used to refine the grain structure of Eurofer-97, a ferritic/ martensitic steel. Electron microscopy and X-ray diffraction were used to characterise the microstructural changes. Following H… ▽ More Severe plastic deformation changes the microstructure and properties of steels, which may be favourable for their use in structural components of nuclear reactors. In this study, high-pressure torsion (HPT) was used to refine the grain structure of Eurofer-97, a ferritic/ martensitic steel. Electron microscopy and X-ray diffraction were used to characterise the microstructural changes. Following HPT, the average grain size reduced by a factor of $\sim$ 30, with a marked increase in high-angle grain boundaries. Dislocation density also increased by more than one order of magnitude. The thermal stability of the deformed material was investigated via in-situ annealing during synchrotron X-ray diffraction. This revealed substantial recovery between 450 K - 800 K. Irradiation with 20 MeV Fe-ions to $\sim$ 0.1 dpa caused a 20% reduction in dislocation density compared to the as-deformed material. However, HPT deformation prior to irradiation did not have a significant effect in mitigating the irradiation-induced reductions in thermal diffusivity and surface acoustic wave velocity of the material. These results provide a multi-faceted understanding of the changes in ferritic/martensitic steels due to severe plastic deformation, and how these changes can be used to alter material properties. △ Less

Submitted 15 August, 2023; originally announced August 2023.

Comments: 59 pages, 19 figures

Dose and compositional dependence of irradiation-induced property change in FeCr

Authors: Kay Song, Dina Sheyfer, Kenichiro Mizohata, Minyi Zhang, Wenjun Liu, Doğa Gürsoy, David Yang, Ivan Tolkachev, Hongbing Yu, David E J Armstrong, Felix Hofmann

Abstract: Ferritic/martensitic steels will be used as structural components in next generation nuclear reactors. Their successful operation relies on an understanding of irradiation-induced defect behaviour in the material. In this study, Fe and FeCr alloys (3-12%Cr) were irradiated with 20 MeV Fe-ions at 313 K to doses ranging between 0.00008 dpa to 6.0 dpa. This dose range covers six orders of magnitude,… ▽ More Ferritic/martensitic steels will be used as structural components in next generation nuclear reactors. Their successful operation relies on an understanding of irradiation-induced defect behaviour in the material. In this study, Fe and FeCr alloys (3-12%Cr) were irradiated with 20 MeV Fe-ions at 313 K to doses ranging between 0.00008 dpa to 6.0 dpa. This dose range covers six orders of magnitude, spanning low, transition and high dose regimes. Lattice strain and hardness in the irradiated material were characterised with micro-beam Laue X-ray diffraction and nanoindentation, respectively. Irradiation hardening was observed even at very low doses (0.00008 dpa) and showed a monotonic increase with dose up to 6.0 dpa. Lattice strain measurements of samples at 0.0008 dpa allow the calculation of equivalent Frenkel pair densities and corrections to the Norgett-Robinson-Torrens (NRT) model for Fe and FeCr alloys at low dose. NRT efficiency for FeCr is 0.2, which agrees with literature values for high irradiation energy. Lattice strain increases up to 0.8 dpa and then decreases when the damage dose is further increased. The strains measured in this study are lower and peak at a larger dose than predicted by atomistic simulations. This difference can be explained by taking temperature and impurities into account. △ Less

Submitted 4 March, 2024; v1 submitted 1 August, 2023; originally announced August 2023.

Comments: 49 pages, 9 figures, 3 tables

Dislocation Pinning in Helium-Implanted Tungsten: A Molecular Dynamics Study

Authors: Suchandrima Das, Andrea Sand, Felix Hofmann

Abstract: The interaction of edge dislocation with helium-implantation-induced defects in tungsten is investigated using molecular dynamics. Following prior investigations, we consider defects with two helium ions in a vacancy with a self-interstitial bound to it (He2V-SIA). Our observations suggest 3-10 He2V-SIA cluster together, with their pinning strength on glide dislocations increasing with size. For a… ▽ More The interaction of edge dislocation with helium-implantation-induced defects in tungsten is investigated using molecular dynamics. Following prior investigations, we consider defects with two helium ions in a vacancy with a self-interstitial bound to it (He2V-SIA). Our observations suggest 3-10 He2V-SIA cluster together, with their pinning strength on glide dislocations increasing with size. For all cluster sizes, the dislocation bows around the cluster, until it gets unpinned, carrying the SIAs with it and leaving behind a helium-vacancy complex and newly created vacancies in its wake. The remnant helium-vacancy complex has little pinning effect, highlighting the defect-clearing process. A total solute hardening force for a distribution of clusters of different sizes, induced by 3000 appm of helium, is found to be approximately 700 MPa. This is in good agreement with the corresponding value of 750 MPa estimated in a previously developed crystal plasticity model simulating the deformation behaviour of the helium-implanted tungsten. △ Less

Submitted 27 April, 2023; originally announced April 2023.

The Effect of High Pressure Torsion on Irradiation Hardening of Eurofer-97

Authors: Gregory Strangward-Pryce, Kay Song, Kenichiro Mizohata, Felix Hofmann

Abstract: We investigated the effect of nano-structuring by high-pressure torsion (HPT) on the irradiation performance of Eurofer-97. Material was deformed to shear strains from 0 to ~230, and then exposed to Fe$^{3+}$ irradiation doses of 0.01 and 0.1 displacements-per-atom (dpa). Nanoindentation hardness increases monotonically with deformation, and with irradiation for the undeformed material. For both d… ▽ More We investigated the effect of nano-structuring by high-pressure torsion (HPT) on the irradiation performance of Eurofer-97. Material was deformed to shear strains from 0 to ~230, and then exposed to Fe$^{3+}$ irradiation doses of 0.01 and 0.1 displacements-per-atom (dpa). Nanoindentation hardness increases monotonically with deformation, and with irradiation for the undeformed material. For both damage levels, less irradiation hardening is observed in severely deformed material. This effect is most prominent in the strain range ~60 to ~160, suggesting that nano-structuring may provide an approach for reducing irradiation hardening. △ Less

Submitted 21 June, 2023; v1 submitted 7 February, 2023; originally announced February 2023.

Comments: 11 pages, 4 figures, Credit author statement included

Characterisation of Corrosion Damage in T91/F91 steel exposed to Liquid Lead-Bismuth Eutectic

Authors: M. T. Lapington, M. Zhang, M. P. Moody, W. Y. Zhou, M. P. Short, F. Hofmann

Abstract: T91 samples were exposed to static liquid lead-bismuth eutectic (LBE) at 700°C for 250-500 hours in either an oxidising or reducing environment. Corrosion damage was characterised using electron microscopy techniques, which identified networks of LBE intrusion beneath LBE-wetted surfaces. Under reducing conditions these networks are uniformly distributed, while they appear patchier and deeper unde… ▽ More T91 samples were exposed to static liquid lead-bismuth eutectic (LBE) at 700°C for 250-500 hours in either an oxidising or reducing environment. Corrosion damage was characterised using electron microscopy techniques, which identified networks of LBE intrusion beneath LBE-wetted surfaces. Under reducing conditions these networks are uniformly distributed, while they appear patchier and deeper under oxidising conditions. The individual intrusions preferentially follow microstructural features, initially along prior-austenite grain boundaries, followed by penetration down martensite lath boundaries. Local depletion of Cr was observed within 4 μm of the intrusions and along intersecting boundaries, suggesting local Cr dissolution as the main corrosion mechanism. △ Less

Submitted 7 February, 2023; originally announced February 2023.

Comments: 14 pages, 4 figures and graphical abstract, submitted to Scripta Materialia

Report number: NUMA_154687

Elastic Strain Associated with Irradiation-Induced Defects in Self-ion Irradiated Tungsten

Authors: Guanze He, Hongbing Yu, Phani Karamched, Junliang Liu, Felix Hofmann

Abstract: Elastic interactions play an important role in controlling irradiation damage evolution, but remain largely unexplored experimentally. Using transmission electron microscopy (TEM) and high-resolution on-axis transmission Kikuchi diffraction (HR-TKD), we correlate the evolution of irradiation-induced damage structures and the associated lattice strains in self-ion irradiated pure tungsten. TEM reve… ▽ More Elastic interactions play an important role in controlling irradiation damage evolution, but remain largely unexplored experimentally. Using transmission electron microscopy (TEM) and high-resolution on-axis transmission Kikuchi diffraction (HR-TKD), we correlate the evolution of irradiation-induced damage structures and the associated lattice strains in self-ion irradiated pure tungsten. TEM reveals different dislocation loop structures as a function of sample thickness, suggesting that free surfaces limit the formation of extended defect structures found in thicker samples. HR-TKD strain analysis shows the formation of crystallographically-orientated long-range strain fluctuation above 0.01 dpa and a decrease of total elastic energy above 0.1 dpa. △ Less

Submitted 18 November, 2022; originally announced November 2022.

Refinements for Bragg coherent X-ray diffraction imaging: Electron backscatter diffraction alignment and strain field computation

Authors: David Yang, Mark T. Lapington, Guanze He, Kay Song, Minyi Zhang, Clara Barker, Ross J. Harder, Wonsuk Cha, Wenjun Liu, Nicholas W. Phillips, Felix Hofmann

Abstract: Bragg coherent X-ray diffraction imaging (BCDI) allows the three-dimensional (3D) measurement of lattice strain along the scattering vector for specific microcrystals. If at least three linearly independent reflections are measured, the 3D variation of the full lattice strain tensor within the microcrystal can be recovered. However, this requires knowledge of the crystal orientation, which is typi… ▽ More Bragg coherent X-ray diffraction imaging (BCDI) allows the three-dimensional (3D) measurement of lattice strain along the scattering vector for specific microcrystals. If at least three linearly independent reflections are measured, the 3D variation of the full lattice strain tensor within the microcrystal can be recovered. However, this requires knowledge of the crystal orientation, which is typically attained via estimates based on crystal geometry or synchrotron micro-beam Laue diffraction measurements. Here, we present an alternative method to determine the crystal orientation for BCDI measurements, by using electron backscatter diffraction (EBSD) to align Fe-Ni and Co-Fe alloy microcrystals on three different substrates. The orientation matrix is calculated from EBSD Euler angles and compared to the orientation determined using micro-beam Laue diffraction. The average angular mismatch between the orientation matrices is less than ~6 degrees, which is reasonable for the search for Bragg reflections. We demonstrate the use of an orientation matrix derived from EBSD to align and measure five reflections for a single Fe-Ni microcrystal using multi-reflection BCDI. Using this dataset, a refined strain field computation based on the gradient of the complex exponential of the phase is developed. This approach is shown to increase accuracy, especially in the presence of dislocations. Our results demonstrate the feasibility of using EBSD to pre-align BCDI samples and the application of more efficient approaches to determine the lattice strain tensor with greater accuracy. △ Less

Submitted 2 October, 2022; v1 submitted 31 March, 2022; originally announced March 2022.

Comments: 39 pages, 12 figures

Journal ref: J. Appl. Cryst. (2022). 55, 1184-119

Computation of Burgers Vectors from Elastic Strain and Lattice Rotation Data

Authors: Jacques Cloete, Edmund Tarleton, Felix Hofmann

Abstract: A theoretical framework for computation of Burgers vectors from strain and lattice rotation data is presented, as well as implementation into a computer program to automate the process. The efficacy of the method is verified using simulated data of dislocations with known results. A 3D data set retrieved from Bragg coherent diffraction imaging (BCDI) and a 2D data set from high resolution transmis… ▽ More A theoretical framework for computation of Burgers vectors from strain and lattice rotation data is presented, as well as implementation into a computer program to automate the process. The efficacy of the method is verified using simulated data of dislocations with known results. A 3D data set retrieved from Bragg coherent diffraction imaging (BCDI) and a 2D data set from high resolution transmission Kikuchi diffraction (HR-TKD) are used as inputs to demonstrate the reliable identification of dislocation positions and accurate determination of Burgers vectors from experimental data. For BCDI data, the results found using our approach show very close agreement to those expected from empirical methods. For the HR-TKD data the predicted dislocation position and the computed Burgers vector showed fair agreement with the expected result, which is promising considering the substantial experimental uncertainties in this dataset. The method reported in this paper provides a general and robust framework for determining dislocation positions and Burgers vectors, and can be readily applied to data from other experimental techniques. △ Less

Submitted 1 December, 2021; originally announced December 2021.

Comments: 20 pages, 11 figures. The program created, data used and tests performed are freely available from https://github.com/JacquesCloete/Burgers-Vector-Calculator

In situ Bragg coherent X-ray diffraction imaging of corrosion in a Co-Fe alloy microcrystal

Authors: David Yang, Nicholas W. Phillips, Kay Song, Clara Barker, Ross J. Harder, Wonsuk Cha, Wenjun Liu, Felix Hofmann

Abstract: Corrosion is a major concern for many industries, as corrosive environments can induce structural and morphological changes that lead to material dissolution and accelerate material failure. The progression of corrosion depends on nanoscale morphology, stress, and defects present. Experimentally monitoring this complex interplay is challenging. Here we implement in situ Bragg coherent X-ray diffra… ▽ More Corrosion is a major concern for many industries, as corrosive environments can induce structural and morphological changes that lead to material dissolution and accelerate material failure. The progression of corrosion depends on nanoscale morphology, stress, and defects present. Experimentally monitoring this complex interplay is challenging. Here we implement in situ Bragg coherent X-ray diffraction imaging (BCDI) to probe the dissolution of a Co-Fe alloy microcrystal exposed to hydrochloric acid (HCl). By measuring five Bragg reflections from a single isolated microcrystal at ambient conditions, we compare the full three-dimensional (3D) strain state before corrosion and the strain along the [111] direction throughout the corrosion process. We find that the strained surface layer of the crystal dissolves to leave a progressively less strained surface. Interestingly, the average strain closer to the centre of the crystal increases during the corrosion process. We determine the localised corrosion rate from BCDI data, revealing the preferential dissolution of facets more exposed to the acid stream, highlighting an experimental geometry effect. These results bring new perspectives to understanding the interplay between crystal strain, morphology, and corrosion; a prerequisite for the design of more corrosion-resistant materials. △ Less

Submitted 27 January, 2022; v1 submitted 15 November, 2021; originally announced November 2021.

Comments: 10 pages, 11 figures

Thermal diffusivity recovery and defect annealing kinetics of self-ion implanted tungsten probed by insitu Transient Grating Spectroscopy

Authors: Abdallah Reza, Guanze He, Cody A. Dennett, Hongbing Yu, Kenichiro Mizohata, Felix Hofmann

Abstract: Tungsten is a promising candidate material for plasma-facing armour components in future fusion reactors. A key concern is irradiation-induced degradation of its normally excellent thermal transport properties. In this comprehensive study, thermal diffusivity degradation in ion-implanted tungsten and its evolution from room temperature (RT) to 1073 K is considered. Five samples were exposed to 20… ▽ More Tungsten is a promising candidate material for plasma-facing armour components in future fusion reactors. A key concern is irradiation-induced degradation of its normally excellent thermal transport properties. In this comprehensive study, thermal diffusivity degradation in ion-implanted tungsten and its evolution from room temperature (RT) to 1073 K is considered. Five samples were exposed to 20 MeV self-ions at RT to achieve damage levels ranging from 3.2 x 10-4 to 3.2 displacements per atom (dpa). Transient grating spectroscopy with insitu heating was then used to study thermal diffusivity evolution as a function of temperature. Using a kinetic theory model, an equivalent point defect density is estimated from the measured thermal diffusivity. The results showed a prominent recovery of thermal diffusivity between 450 K and 650 K, which coincides with the onset of mono-vacancy mobility. After 1073 K annealing samples with initial damage of 3.2 x 10-3 dpa or less recover close to the pristine value of thermal diffusivity. For doses of 3.2 x 10-2 dpa or higher, on the other hand, a residual reduction in thermal diffusivity remains even after 1073 K annealing. Transmission electron microscopy reveals that this is associated with extended, irradiation-induced dislocation structures that are retained after annealing. A sensitivity analysis shows that thermal diffusivity provides an efficient tool for assessing total defect content in tungsten up to 1000 K. △ Less

Submitted 15 November, 2021; originally announced November 2021.

Deformation Behaviour of Ion-Irradiated FeCr: A Nanoindentation Study

Authors: Kay Song, Hongbing Yu, Phani Karamched, Kenichiro Mizohata, David Armstrong, Felix Hofmann

Abstract: Understanding the mechanisms of plasticity in structural steels is essential for the operation of next-generation fusion reactors. Elemental composition, particularly the amount of Cr present, and irradiation can have separate and synergistic effects on the mechanical properties of ferritic/martensitic steels. The study of ion-irradiated FeCr alloys is useful for gaining a mechanistic understandin… ▽ More Understanding the mechanisms of plasticity in structural steels is essential for the operation of next-generation fusion reactors. Elemental composition, particularly the amount of Cr present, and irradiation can have separate and synergistic effects on the mechanical properties of ferritic/martensitic steels. The study of ion-irradiated FeCr alloys is useful for gaining a mechanistic understanding of irradiation damage in steels. Previous studies of ion-irradiated FeCr did not clearly distinguish between the nucleation of dislocations to initiate plasticity, and their propagation through the material as plasticity progresses. In this study, Fe3Cr, Fe5Cr, and Fe10Cr were irradiated with 20 MeV Fe$^{3+}$ ions at room temperature to nominal doses of 0.01 dpa and 0.1 dpa. Nanoindentation was carried out with Berkovich and spherical indenter tips to study the nucleation of dislocations and their subsequent propagation. The presence of irradiation-induced defects reduced the theoretical shear stress and barrier for dislocation nucleation. The presence of Cr further enhanced this effect due to increased retention of irradiation defects. However, this combined effect is still small compared to dislocation nucleation from pre-existing sources such as Frank-Read sources and grain boundaries. The yield strength, an indicator of dislocation mobility, of FeCr increased with irradiation damage and Cr. The increased retention of irradiation defects due to the presence of Cr also further increased the yield strength. Reduced work hardening capacity was also observed following irradiation. The synergistic effects of Cr and irradiation damage in FeCr appear to be more important for the propagation of dislocations, rather than their nucleation. △ Less

Submitted 19 July, 2021; originally announced July 2021.

Comments: 32 pages, 10 figures

An estimate for thermal diffusivity in highly irradiated tungsten using Molecular Dynamics simulation

Authors: Daniel R Mason, Abdallah Reza, Fredric Granberg, Felix Hofmann

Abstract: The changing thermal conductivity of an irradiated material is among the principal design considerations for any nuclear reactor, but at present few models are capable of predicting these changes starting from an arbitrary atomistic model. Here we present a simple model for computing the thermal diffusivity of tungsten, based on the conductivity of the perfect crystal and resistivity per Frenkel p… ▽ More The changing thermal conductivity of an irradiated material is among the principal design considerations for any nuclear reactor, but at present few models are capable of predicting these changes starting from an arbitrary atomistic model. Here we present a simple model for computing the thermal diffusivity of tungsten, based on the conductivity of the perfect crystal and resistivity per Frenkel pair, and dividing a simulation into perfect and athermal regions statistically. This is applied to highly irradiated microstructures simulated with Molecular Dynamics. A comparison to experiment shows that simulations closely track observed thermal diffusivity over a range of doses from the dilute limit of a few Frenkel pairs to the high dose saturation limit at 3 displacements per atom (dpa). △ Less

Submitted 24 November, 2021; v1 submitted 25 June, 2021; originally announced June 2021.

Comments: preprint submitted to journal

Observation of transient and asymptotic driven structural states of tungsten exposed to irradiation

Authors: Daniel R. Mason, Suchandrima Das, Peter M. Derlet, Sergei L. Dudarev, Andrew London, Hongbing Yu, Nicholas W. Phillips, David Yang, Kenichiro Mizohata, Ruqing Xu, Felix Hofmann

Abstract: Combining spatially resolved X-ray Laue diffraction with atomic-scale simulations, we observe how ion-irradiated tungsten undergoes a series of non-linear structural transformations with increasing irradiation exposure. Nanoscale defect-induced deformations accumulating above 0.02 displacements per atom (dpa) lead to highly fluctuating strains at ~0.1 dpa, collapsing into a driven quasi-steady str… ▽ More Combining spatially resolved X-ray Laue diffraction with atomic-scale simulations, we observe how ion-irradiated tungsten undergoes a series of non-linear structural transformations with increasing irradiation exposure. Nanoscale defect-induced deformations accumulating above 0.02 displacements per atom (dpa) lead to highly fluctuating strains at ~0.1 dpa, collapsing into a driven quasi-steady structural state above ~1 dpa. The driven asymptotic state is characterized by finely dispersed vacancy defects coexisting with an extended dislocation network, and exhibits positive volumetric swelling due to the creation of new crystallographic planes through self-interstitial coalescence, but negative lattice strain. △ Less

Submitted 5 October, 2020; v1 submitted 30 July, 2020; originally announced July 2020.

Comments: 9 pages, 9 figures, in print with PRL

Orientation dependence of the nano-indentation behaviour of pure tungsten

Authors: Hongbing Yu, Suchandrima Das, Haiyang Yu, Phani Karamched, Edmund Tarleton, Felix Hofmann

Abstract: Coupling of nano-indentation and crystal plasticity finite element (CPFE) simulations is widely used to quantitatively probe the small-scale mechanical behaviour of materials. Earlier studies showed that CPFE can successfully reproduce the load-displacement curves and surface morphology for different crystal orientations. Here, we report the orientation dependence of residual lattice strain patter… ▽ More Coupling of nano-indentation and crystal plasticity finite element (CPFE) simulations is widely used to quantitatively probe the small-scale mechanical behaviour of materials. Earlier studies showed that CPFE can successfully reproduce the load-displacement curves and surface morphology for different crystal orientations. Here, we report the orientation dependence of residual lattice strain patterns and dislocation structures in tungsten. For orientations with one or more Burgers vectors close to parallel to the sample surface, dislocation movement and residual lattice strains are confined to long, narrow channels. CPFE is unable to reproduce this behaviour, and our analysis reveals the responsible underlying mechanisms. △ Less

Submitted 8 August, 2020; v1 submitted 30 July, 2020; originally announced July 2020.

Annealing of focused ion beam damage in gold microcrystals: An in situ Bragg coherent X-ray diffraction imaging study

Authors: David Yang, Nicholas W. Phillips, Kay Song, Ross J. Harder, Wonsuk Cha, Felix Hofmann

Abstract: Focused ion beam (FIB) techniques are commonly used to machine, analyse and image materials at the micro- and nanoscale. However, FIB modifies the integrity of the sample by creating defects that cause lattice distortions. Methods have been developed to reduce FIB-induced strain, however these protocols need to be evaluated for their effectiveness. Here we use non-destructive Bragg coherent X-ray… ▽ More Focused ion beam (FIB) techniques are commonly used to machine, analyse and image materials at the micro- and nanoscale. However, FIB modifies the integrity of the sample by creating defects that cause lattice distortions. Methods have been developed to reduce FIB-induced strain, however these protocols need to be evaluated for their effectiveness. Here we use non-destructive Bragg coherent X-ray diffraction imaging to study the in situ annealing of FIB-milled gold microcrystals. We simultaneously measure two non-collinear reflections for two different crystals during a single annealing cycle, demonstrating the ability to reliably track the location of multiple Bragg peaks during thermal annealing. The thermal lattice expansion of each crystal is used to calculate the local temperature. This is compared to thermocouple readings, which are shown to be substantially affected by thermal resistance. To evaluate the annealing process, we analyse each reflection by considering facet area evolution, cross-correlation maps of displacement field and binarised morphology, and average strain plots. The crystal's strain and morphology evolve with increasing temperature, which is likely to be caused by the diffusion of gallium in gold below ~280°C and the self-diffusion of gold above ~280°C. The majority of FIB-induced strains are removed by 380-410\degree C, depending on which reflection is being considered. Our observations highlight the importance of measuring multiple reflections to unambiguously interpret material behaviour. △ Less

Submitted 4 March, 2021; v1 submitted 23 July, 2020; originally announced July 2020.

Comments: 51 pages, 16 figures

Journal ref: J. Synchrotron Rad. 28, 550-565 (2021)

Characterising Ion-Irradiated FeCr: Hardness, Thermal Diffusivity and Lattice Strain

Authors: Kay Song, Suchandrima Das, Abdallah Reza, Nicholas W. Phillips, Ruqing Xu, Hongbing Yu, Kenichiro Mizohata, David E. J. Armstrong, Felix Hofmann

Abstract: Ion-irradiated FeCr alloys are useful for understanding and predicting neutron-damage in the structural steels of future nuclear reactors. Previous studies have largely focused on the structure of irradiation-induced defects, probed by transmission electron microscopy (TEM), as well as changes in mechanical properties. Across these studies, a wide range of irradiation conditions has been employed… ▽ More Ion-irradiated FeCr alloys are useful for understanding and predicting neutron-damage in the structural steels of future nuclear reactors. Previous studies have largely focused on the structure of irradiation-induced defects, probed by transmission electron microscopy (TEM), as well as changes in mechanical properties. Across these studies, a wide range of irradiation conditions has been employed on samples with different processing histories, which complicates the analysis of the relationship between defect structures and material properties. Furthermore, key properties, such as irradiation-induced changes in thermal transport and lattice strain, are little explored. Here we present a systematic study of Fe3Cr, Fe5Cr and Fe10Cr binary alloys implanted with 20 MeV Fe$^{3+}$ ions to nominal doses of 0.01 dpa and 0.1 dpa at room temperature. Nanoindentation, transient grating spectroscopy (TGS) and X-ray micro-beam Laue diffraction were used to study the changes in hardness, thermal diffusivity and strain in the material as a function of damage and Cr content. Our results suggest that Cr leads to an increased retention of irradiation-induced defects, causing substantial changes in hardness and lattice strain. However, thermal diffusivity varies little with increasing damage and instead degrades significantly with increasing Cr content in the material. We find significant lattice strains even in samples exposed to a nominal displacement damage of 0.01 dpa. The defect density predicted from the lattice strain measurements is significantly higher than that observed in previous TEM studies, suggesting that TEM may not fully capture the irradiation-induced defect population. △ Less

Submitted 2 October, 2020; v1 submitted 19 June, 2020; originally announced June 2020.

Nanoscale lattice strains in self-ion implanted tungsten

Authors: N. W. Phillips, H. Yu, S. Das, D. Yang, K. Mizohata, W. Liu, R. Xu, R. J. Harder, F. Hofmann

Abstract: Developing a comprehensive understanding of the modification of material properties by neutron irradiation is important for the design of future fission and fusion power reactors. Self-ion implantation is commonly used to mimic neutron irradiation damage, however an interesting question concerns the effect of ion energy on the resulting damage structures. The reduction in the thickness of the impl… ▽ More Developing a comprehensive understanding of the modification of material properties by neutron irradiation is important for the design of future fission and fusion power reactors. Self-ion implantation is commonly used to mimic neutron irradiation damage, however an interesting question concerns the effect of ion energy on the resulting damage structures. The reduction in the thickness of the implanted layer as the implantation energy is reduced results in the significant quandary: Does one attempt to match the primary knock-on atom energy produced during neutron irradiation or implant at a much higher energy, such that a thicker damage layer is produced? Here we address this question by measuring the full strain tensor for two ion implantation energies, 2 MeV and 20 MeV in self-ion implanted tungsten, a critical material for the first wall and divertor of fusion reactors. A comparison of 2 MeV and 20 MeV implanted samples is shown to result in similar lattice swelling. Multi-reflection Bragg coherent diffractive imaging (MBCDI) shows that implantation induced strain is in fact heterogeneous at the nanoscale, suggesting that there is a non-uniform distribution of defects, an observation that is not fully captured by micro-beam Laue diffraction. At the surface, MBCDI and high-resolution electron back-scattered diffraction (HR-EBSD) strain measurements agree quite well in terms of this clustering/non-uniformity of the strain distribution. However, MBCDI reveals that the heterogeneity at greater depths in the sample is much larger than at the surface. This combination of techniques provides a powerful method for detailed investigation of the microstructural damage caused by ion bombardment, and more generally of strain related phenomena in microvolumes that are inaccessible via any other technique. △ Less

Submitted 4 June, 2020; originally announced June 2020.

Comments: Please refer to the supplementary information and movies SM1-3 for data visualisation

Non-destructive study of collision cascade damage in self-ion irradiated tungsten using HR-EBSD and ECCI

Authors: Hongbing Yu, Phani Karamched, Suchandrima Das, Junliang Liu, Kenichiro Mizohata, Felix Hofmann

Abstract: Understanding defect production and evolution under irradiation is a long-standing multi-scale problem. Conventionally, experimental examination of irradiation-induced defects (IIDs) has mainly relied on transmission electron microscopy (TEM), which offers high spatial resolution but requires destructive sample preparation. Furthermore, limited field of view and low strain sensitivity make multi-s… ▽ More Understanding defect production and evolution under irradiation is a long-standing multi-scale problem. Conventionally, experimental examination of irradiation-induced defects (IIDs) has mainly relied on transmission electron microscopy (TEM), which offers high spatial resolution but requires destructive sample preparation. Furthermore, limited field of view and low strain sensitivity make multi-scale characterisation and quantitative strain measurements difficult. Here we explore the potential of using advanced techniques in the scanning electron microscope (SEM) to non-destructively probe irradiation damage at the surface of bulk materials. Electron channelling contrast imaging (ECCI) is used to image nano-scale irradiation-induced defects in 20 MeV self-ion irradiated tungsten, the main candidate material for fusion reactor armour. The results show an evolution of the damage microstructure from uniformly and randomly distributed nano-scale defects at 0.01 dpa (displacement per atom) to string structures extending over hundreds of nanometres at 1 dpa. Cross-correlation based high-resolution EBSD (HR-EBSD) is used to probe the lattice strain fields associated with IIDs. While there is little strain fluctuation at 0.01 dpa, significant heterogeneity in the lattice strains is observed at 0.1 dpa, increasing with dose until saturation at 0.32 dpa. The characteristic length scale of strain fluctuations is ~500 nm. Together, ECCI and HR-EBSD reveal a transition from a structure where defects are disordered to a structure with long-range order driven by elastic interactions between pre-existing defects and new cascade damage. This study demonstrates that SEM provides an attractive tool for rapid throughput, non-destructive, multi-scale and multi-aspect characterisation of irradiation damage. △ Less

Submitted 8 August, 2020; v1 submitted 19 May, 2020; originally announced May 2020.

Non-contact, non-destructive mapping of thermal diffusivity and surface acoustic wave speed using transient grating spectroscopy

Authors: Abdallah Reza, Cody A. Dennett, Michael P. Short, John Waite, Yevhen Zayachuk, Christopher M. Magazzeni, Simon Hills, Felix Hofmann

Abstract: We present new developments of the laser-induced transient grating spectroscopy (TGS) technique that enable the measurement of large area 2D maps of thermal diffusivity and surface acoustic wave speed. Additional capabilities include targeted measurements and the ability to accommodate samples with increased surface roughness. These new capabilities are demonstrated by recording large TGS maps of… ▽ More We present new developments of the laser-induced transient grating spectroscopy (TGS) technique that enable the measurement of large area 2D maps of thermal diffusivity and surface acoustic wave speed. Additional capabilities include targeted measurements and the ability to accommodate samples with increased surface roughness. These new capabilities are demonstrated by recording large TGS maps of deuterium implanted tungsten, linear friction welded aerospace alloys and high entropy alloys with a range of grain sizes. The results illustrate the ability to view grain microstructure in elastically anisotropic samples, and to detect anomalies in samples, for example due to irradiation and previous measurements. They also point to the possibility of using TGS to quantify grain size at the surface of polycrystalline materials. △ Less

Submitted 4 February, 2020; originally announced February 2020.

Comments: The following article has been submitted to Review of Scientific Instruments. After it is published, it will be found at https://aip.scitation.org/journal/rsi

Modified deformation behaviour of self-ion irradiated tungsten: A combined nano-indentation, HR-EBSD and crystal plasticity study

Authors: Suchandrima Das, Hongbing Yu, Kenichiro Mizohata, Edmund Tarleton, Felix Hofmann

Abstract: Predicting the dramatic changes in material properties caused by irradiation damage is key for the design of future nuclear fission and fusion reactors. Self-ion implantation is an attractive tool for mimicking the effects of neutron irradiation. However, the damaged layer of implanted samples is only few microns thick, making it difficult to estimate macroscopic properties. Here we address this c… ▽ More Predicting the dramatic changes in material properties caused by irradiation damage is key for the design of future nuclear fission and fusion reactors. Self-ion implantation is an attractive tool for mimicking the effects of neutron irradiation. However, the damaged layer of implanted samples is only few microns thick, making it difficult to estimate macroscopic properties. Here we address this challenge using a combination of experimental and modelling techniques. We concentrate on self-ion-implanted tungsten, the front-runner for fusion armour components and a prototypical bcc material. To capture dose-dependent evolution of properties, we experimentally characterise samples with damage levels from 0.01 to 1 dpa. Spherical nano-indentation of <001> grains shows hardness increasing up to a dose of 0.032 dpa, beyond which it saturates. AFM measurements show pile-up increasing up to the same dose, beyond which large pile-up and slip-steps are seen. Based on the observations we develop a crystal plasticity (CPFE) model for the irradiated material. It captures irradiation-induced hardening followed by strain-softening through interaction of irradiation-defects and gliding dislocations. Shear resistance of irradiation-defects is derived from TEM observations of similarly irradiated samples. Nano-indentation of pristine and implanted tungsten of doses 0.01, 0.1, 0.32 and 1 dpa is simulated. Two model parameters are fitted to the experimental results of the 0.01 dpa sample and are kept unchanged for all other doses. Peak load, indent surface profiles and damage saturation predicted by the CPFE model closely match experimental observations. Predicted lattice distortions and dislocation distributions around indents agree with corresponding measurements from HR-EBSD. Finally, the CPFE model is used to predict the macroscopic stress-strain response of similarly irradiated bulk tungsten material. △ Less

Submitted 1 July, 2020; v1 submitted 23 November, 2019; originally announced November 2019.

Thermal diffusivity degradation and point defect density in self-ion implanted tungsten

Authors: Abdallah Reza, Hongbing Yu, Kenichiro Mizohata, Felix Hofmann

Abstract: Using transient grating spectroscopy (TGS) we measure the thermal diffusivity of tungsten exposed to different levels of 20 MeV self-ion irradiation. Damage as low as 3.2 x 10^-4 displacements per atom (dpa) causes a measurable reduction in thermal diffusivity. Doses of 0.1 dpa and above, up to 10 dpa, give a degradation of around 55% from the pristine value at room temperature. Using a kinetic th… ▽ More Using transient grating spectroscopy (TGS) we measure the thermal diffusivity of tungsten exposed to different levels of 20 MeV self-ion irradiation. Damage as low as 3.2 x 10^-4 displacements per atom (dpa) causes a measurable reduction in thermal diffusivity. Doses of 0.1 dpa and above, up to 10 dpa, give a degradation of around 55% from the pristine value at room temperature. Using a kinetic theory model, the density of irradiation-induced point defects is estimated based on the measured changes in thermal diffusivity as a function of dose. These predictions are compared with point defect and dislocation loop densities observed in transmission electron microscopy (TEM). Molecular dynamics (MD) predictions are combined with the TEM observations to estimate the density of point defects associated with defect clusters too small to be probed by TEM. When these "invisible" defects are accounted for, the total point defect density agrees well with that estimated from TGS for a range of doses spanning 3 orders of magnitude. Kinetic theory modelling is also used to estimate the thermal diffusivity degradation expected due to TEM-visible and invisible defects. Finely distributed invisible defects appear to play a much more important role in the thermal diffusivity reduction than larger TEM-visible dislocation loops. This work demonstrates the capability of TGS, in conjunction with kinetic theory models, to provide rapid, quantitative insight into defect densities and property evolution in irradiated materials. △ Less

Submitted 4 February, 2020; v1 submitted 30 September, 2019; originally announced September 2019.

Comments: The following article has been revised and submitted to Acta Materialia. After it is published, it will be found at https://www.journals.elsevier.com/acta-materialia

Dislocation density distribution at slip band-grain boundary intersections

Authors: Yi Guo, David M. Collins, Edmund Tarleton, Felix Hofmann, Angus J. Wilkinson, T. Ben Britton

Abstract: We study the mechanisms of slip transfer at a grain boundary, in titanium, using Differential Aperture X-ray Laue Micro-diffraction (DAXM). This 3D characterization tool enables measurement of the full (9-component) Nye lattice curvature tensor and calculation of the density of geometrically necessary dislocations (GNDs). We observe dislocation pile-ups at a grain boundary, as the neighbor grain p… ▽ More We study the mechanisms of slip transfer at a grain boundary, in titanium, using Differential Aperture X-ray Laue Micro-diffraction (DAXM). This 3D characterization tool enables measurement of the full (9-component) Nye lattice curvature tensor and calculation of the density of geometrically necessary dislocations (GNDs). We observe dislocation pile-ups at a grain boundary, as the neighbor grain prohibits easy passage for dislocation transmission. This incompatibility results in local micro-plasticity within the slipping grain, near to where the slip planes intersect the grain boundary, and we observe bands of GNDs lying near the grain boundary. We observe that the distribution of GNDs can be significantly influenced by the formation of grain boundary ledges that serve as secondary dislocation sources. This observation highlights the non-continuum nature of polycrystal deformation and helps us understand the higher order complexity of grain boundary characteristics. △ Less

Submitted 6 September, 2019; v1 submitted 2 September, 2019; originally announced September 2019.

Comments: 30 pages, 9 figures, 2 tables

Journal ref: Acta Materialia Volume 182, 1 January 2020, Pages 172-183

Transient grating spectroscopy: An ultrarapid, nondestructive materials evaluation technique

Authors: Felix Hofmann, Michael P. Short, Cody A. Dennett

Abstract: Structure-property relationships are the foundation of materials science. Linking microstructure and material properties is essential for predicting material response to driving forces, managing in-service material degradation, and engineering materials for optimal performance. Elastic, thermal, and acoustic properties provide a convenient gateway to directly or indirectly probe material structure… ▽ More Structure-property relationships are the foundation of materials science. Linking microstructure and material properties is essential for predicting material response to driving forces, managing in-service material degradation, and engineering materials for optimal performance. Elastic, thermal, and acoustic properties provide a convenient gateway to directly or indirectly probe material structure across multiple length scales. We review how using the laser-induced transient grating spectroscopy (TGS) technique, which uses a transient diffraction grating to generate surface acoustic waves (SAWs) and temperature gratings on a material surface, non-destructively reveals the material elasticity, thermal diffusivity, and energy dissipation on the sub-microsecond timescale, within a tunable sub-surface depth. This technique has already been applied to many challenging problems in materials characterization, from analysis of radiation damage, to colloidal crystals, to phonon-mediated thermal transport in nanostructured systems, to crystal orientation and lattice parameter determination. Examples of these applications, as well as inferring aspects of microstructural evolution, illustrate the wide potential reach of TGS to solve old materials challenges, and to uncover new science. We conclude by looking ahead at the tremendous potential of TGS for materials discovery and optimization when applied in situ to dynamically evolving systems. △ Less

Submitted 6 August, 2019; originally announced August 2019.

Comments: 35 pages, 9 figures

Journal ref: MRS bulletin 44, 5 (May 2019) pp. 392-402

Surface terraces in pure tungsten formed by high-temperature oxidation

Authors: Hongbing Yu, Suchandrima Das, Junliang Liu, Jason Hess, Felix Hofmann

Abstract: We observe large-scale surface terraces in tungsten oxidised at high temperature and in high vacuum. Their formation is highly dependent on crystal orientation, with only {111} grains showing prominent terraces. Terrace facets are aligned with {100} crystallographic planes, leading to an increase in total surface energy, making a diffusion-driven formation mechanism unlikely. Instead we hypothesiz… ▽ More We observe large-scale surface terraces in tungsten oxidised at high temperature and in high vacuum. Their formation is highly dependent on crystal orientation, with only {111} grains showing prominent terraces. Terrace facets are aligned with {100} crystallographic planes, leading to an increase in total surface energy, making a diffusion-driven formation mechanism unlikely. Instead we hypothesize that preferential oxidation of {100} crystal planes controls terrace formation. Grain height profiles after oxidation and the morphology of samples heat treated with limited oxygen supply are consistent with this hypothesis. Our observations have important implications for the use of tungsten in extreme environments. △ Less

Submitted 6 August, 2019; originally announced August 2019.

Comments: 10 pages, 4 figures & supplementary

Mapping data between sample and detector conjugated spaces in Bragg coherent diffraction imaging

Authors: David Yang, Nicholas W. Phillips, Felix Hofmann

Abstract: Bragg coherent X-ray diffraction imaging (BCDI) is a non-destructive, lensless method for 3D-resolved, nanoscale strain imaging in micro-crystals. A challenge, particularly for new users of the technique, is accurate mapping of experimental data, collected in the detector reciprocal space coordinate frame, to more convenient orthogonal coordinates, e.g. attached to the sample. This is particularly… ▽ More Bragg coherent X-ray diffraction imaging (BCDI) is a non-destructive, lensless method for 3D-resolved, nanoscale strain imaging in micro-crystals. A challenge, particularly for new users of the technique, is accurate mapping of experimental data, collected in the detector reciprocal space coordinate frame, to more convenient orthogonal coordinates, e.g. attached to the sample. This is particularly the case since different coordinate conventions are used at every BCDI beamline. The reconstruction algorithms and mapping scripts composed for individual beamlines are not readily interchangeable. To overcome this, a BCDI experiment simulation with a plugin script that converts all beamline angles to a universal, right-handed coordinate frame is introduced, making it possible to condense any beamline geometry into three rotation matrices. The simulation translates a user-specified 3D complex object to different BCDI-related coordinate frames. It also allows the generation of synthetic coherent diffraction data that can be inserted into any BCDI reconstruction algorithm to reconstruct the original user-specified object. Scripts are provided to map from sample space to detector conjugated space, detector conjugated space to sample space and detector conjugated space to detector conjugated space for a different reflection. This provides the reader with the basis for a flexible simulation tool kit that is easily adapted to different geometries. It is anticipated that this will find use in the generation of tailor-made supports for phasing of challenging data and exploration of novel geometries or data collection modalities. △ Less

Submitted 4 March, 2021; v1 submitted 28 June, 2019; originally announced June 2019.

Comments: 29 pages, 8 figures

Journal ref: J. Synchrotron Rad. 26, 2055-2063 (2019)

Transient grating spectroscopy of thermal diffusivity degradation in deuterium implanted tungsten

Authors: Abdallah Reza, Yevhen Zayachuk, Hongbing Yu, Felix Hofmann

Abstract: Using transient grating spectroscopy, we measure thermal diffusivity and surface acoustic wave speed in tungsten exposed to different fluences of deuterium plasma. Scanning electron microscopy (SEM) shows the formation of surface blisters that have similar morphology for all fluences. A significant reduction in thermal diffusivity and surface acoustic wave speed occurs as a result of plasma exposu… ▽ More Using transient grating spectroscopy, we measure thermal diffusivity and surface acoustic wave speed in tungsten exposed to different fluences of deuterium plasma. Scanning electron microscopy (SEM) shows the formation of surface blisters that have similar morphology for all fluences. A significant reduction in thermal diffusivity and surface acoustic wave speed occurs as a result of plasma exposure. A saturation of the thermal diffusivity reduction with fluence is seen. Deuterium ion flux density appears play a more important role in the thermal diffusivity reduction than the fluence. These results have important implications for plasma facing components in future fusion reactors. △ Less

Submitted 8 August, 2019; v1 submitted 28 March, 2019; originally announced March 2019.

Journal ref: Scr. Mater. 174 (2020)

Nano-scale imaging of the full strain tensor of specific dislocations extracted from a bulk sample

Authors: Felix Hofmann, Nicholas W. Phillips, Suchandrima Das, Phani Karamched, Gareth M. Hughes, James O. Douglas, Wonsuk Cha, Wenjun Liu

Abstract: Lattice defects play a key role in determining the properties of crystalline materials. Probing the 3D lattice strains that govern their interactions remains a challenge. Bragg Coherent Diffraction Imaging (BCDI) allows strain to be measured with nano-scale 3D resolution. However, it is currently limited to materials that form micro-crystals. Here we introduce a new technique that allows the manuf… ▽ More Lattice defects play a key role in determining the properties of crystalline materials. Probing the 3D lattice strains that govern their interactions remains a challenge. Bragg Coherent Diffraction Imaging (BCDI) allows strain to be measured with nano-scale 3D resolution. However, it is currently limited to materials that form micro-crystals. Here we introduce a new technique that allows the manufacture of BCDI samples from bulk materials. Using tungsten as an example, we show that focussed ion beam (FIB) machining can be used to extract, from macroscopic crystals, micron-sized BCDI samples containing specific pre-selected defects. To interpret the experimental data, we develop a new displacement-gradient-based analysis for multi-reflection BCDI. This allows accurate recovery of the full lattice strain tensor from samples containing multiple dislocations. These new capabilities open the door to BCDI as a microscopy tool for studying complex real-world materials. △ Less

Submitted 18 November, 2019; v1 submitted 10 March, 2019; originally announced March 2019.

Comments: 26 pages, 6 figures

Journal ref: Phys. Rev. Materials 4, 013801 (2020)

Hardening and Strain Localisation in Helium-Ion-Implanted Tungsten

Authors: Suchandrima Das, Hongbing Yu, Edmund Tarleton, Felix Hofmann

Abstract: Tungsten is the main candidate material for plasma-facing armour components in future fusion reactors. In-service, fusion neutron irradiation creates lattice defects through collision cascades. Helium, injected from plasma, aggravates damage by increasing defect retention. Both can be mimicked using helium-ion-implantation. In a recent study on 3000 appm helium-implanted tungsten (W-3000He), we hy… ▽ More Tungsten is the main candidate material for plasma-facing armour components in future fusion reactors. In-service, fusion neutron irradiation creates lattice defects through collision cascades. Helium, injected from plasma, aggravates damage by increasing defect retention. Both can be mimicked using helium-ion-implantation. In a recent study on 3000 appm helium-implanted tungsten (W-3000He), we hypothesized helium-induced irradiation hardening, followed by softening during deformation. The hypothesis was founded on observations of large increase in hardness, substantial pile-up and slip-step formation around nano-indents and Laue diffraction measurements of localised deformation underlying indents. Here we test this hypothesis by implementing it in a crystal plasticity finite element (CPFE) formulation, simulating nano-indentation in W-3000He at 300 K. The model considers thermally-activated dislocation glide through helium-defect obstacles, whose barrier strength is derived as a function of defect concentration and morphology. Only one fitting parameter is used for the simulated helium-implanted tungsten; defect removal rate. The simulation captures the localised large pile-up remarkably well and predicts confined fields of lattice distortions and geometrically necessary dislocation underlying indents which agree quantitatively with previous Laue measurements. Strain localisation is further confirmed through high resolution electron backscatter diffraction and transmission electron microscopy measurements on cross-section lift-outs from centre of nano-indents in W-3000He. △ Less

Submitted 23 November, 2019; v1 submitted 27 December, 2018; originally announced January 2019.

Helium-Implantation-Induced Lattice Strains and Defects in Tungsten probed by X-ray Micro-diffraction

Authors: Suchandrima Das, Ruqing Xu, Wenjun Liu, Felix Hofmann

Abstract: Tungsten is the main candidate material for plasma-facing armour components in future fusion reactors. Bombardment with energetic fusion neutrons causes collision cascade damage and defect formation. Interaction of defects with helium, produced by transmutation and injected from the plasma, modifies defect retention and behaviour. Here we investigate the residual lattice strains caused by differen… ▽ More Tungsten is the main candidate material for plasma-facing armour components in future fusion reactors. Bombardment with energetic fusion neutrons causes collision cascade damage and defect formation. Interaction of defects with helium, produced by transmutation and injected from the plasma, modifies defect retention and behaviour. Here we investigate the residual lattice strains caused by different doses of helium-ion-implantation into tungsten and tungsten-rhenium alloys. Energy and depth-resolved synchrotron X-ray micro-diffraction uniquely permits the measurement of lattice strain with sub-micron 3D spatial resolution and ~10-4 strain sensitivity. Increase of helium dose from 300 appm to 3000 appm increases volumetric strain by only ~2.4 times, indicating that defect retention per injected helium atom is ~3 times higher at low helium doses. This suggests that defect retention is not a simple function of implanted helium dose, but strongly depends on material composition and presence of impurities. Conversely, analysis of W-1wt% Re alloy samples and of different crystal orientations shows that both the presence of rhenium, and crystal orientation, have comparatively small effect on defect retention. These insights are key for the design of armour components in future reactors where it will be essential to account for irradiation-induced dimensional change when predicting component lifetime and performance. △ Less

Submitted 27 December, 2018; v1 submitted 29 August, 2018; originally announced November 2018.

Mapping the full lattice strain tensor of a single dislocation by High Angular Resolution Transmission Kikuchi Diffraction (HR-TKD)

Authors: Hongbing Yu, Junliang Liu, Phani Karamched, Angus J. Wilkinson, Felix Hofmann

Abstract: The full lattice strain tensor and lattice rotations induced by a dislocation in pure tungsten were mapped using high-resolution transmission Kikuchi diffraction (HR-TKD) in a SEM. The HR-TKD measurement agrees very well with a forward calculation using an elastically isotropic model of the dislocation and its Burgers vector. Our results demonstrate that the spatial and angular resolution of HR-TK… ▽ More The full lattice strain tensor and lattice rotations induced by a dislocation in pure tungsten were mapped using high-resolution transmission Kikuchi diffraction (HR-TKD) in a SEM. The HR-TKD measurement agrees very well with a forward calculation using an elastically isotropic model of the dislocation and its Burgers vector. Our results demonstrate that the spatial and angular resolution of HR-TKD in SEM is sufficiently high to resolve the details of lattice distortions near individual dislocations. This capability opens a number of new interesting opportunities, for example determining the Burgers vector of an unknown dislocation in a fast and straightforward way. △ Less

Submitted 29 August, 2018; originally announced August 2018.

Comments: 4 figures

On the challenge to improve the density response with unusual gradient approximations

Authors: J. Garhammer, F. Hofmann, R. Armiento, S. Kümmel

Abstract: Certain excitations, especially ones of long-range charge transfer character, are poorly described by time-dependent density functional theory (TDDFT) when typical (semi-)local functionals are used. A proper description of these excitations would require an exchange-correlation response differing substantially from the usual (semi-)local one. It has recently been shown that functionals of the gene… ▽ More Certain excitations, especially ones of long-range charge transfer character, are poorly described by time-dependent density functional theory (TDDFT) when typical (semi-)local functionals are used. A proper description of these excitations would require an exchange-correlation response differing substantially from the usual (semi-)local one. It has recently been shown that functionals of the generalized gradient approximation (GGA) type can yield unusual potentials, mimicking features of the exact exchange derivative discontinuity and showing divergences on orbital nodal surfaces. We here investigate whether these unusual potential properties translate into beneficial response properties. Using the Sternheimer formalism we closely investigate the response obtained with the 2013 exchange approximation by Armiento and Kümmel (AK13) and the 1988 exchange approximation by Becke (B88), both of which show divergences on orbital nodal planes. Numerical calculations for Na2 as well as analytical and numerical calculations for the hydrogen atom show that the response of AK13 behaves qualitatively different from usual semi local functionals. However, the AK13 functional leads to fundamental instabilities in the asymptotic region that prevent its practical application in TDDFT. Our findings may help the development of future improved functionals, and corroborate that the frequency-dependent Sternheimer formalism is excellently suited for running and analyzing TDDFT calculations. △ Less

Submitted 7 June, 2018; originally announced June 2018.

3D reconstruction of the spatial distribution of dislocation loops using a triangulation approach

Authors: Hongbing Yu, Xiaoou Yi, Felix Hofmann

Abstract: We propose a new approach for reconstructing the 3D spatial distribution of small dislocation loops (DLs) from 2D TEM micrographs. This method is demonstrated for small DLs in tungsten, formed by low-dose ion-implantation, that appear as circular spots in diffraction contrast images. To extract the 3D position of specific DLs, their 2D position in multiple weak-beam dark-field TEM micrographs, rec… ▽ More We propose a new approach for reconstructing the 3D spatial distribution of small dislocation loops (DLs) from 2D TEM micrographs. This method is demonstrated for small DLs in tungsten, formed by low-dose ion-implantation, that appear as circular spots in diffraction contrast images. To extract the 3D position of specific DLs, their 2D position in multiple weak-beam dark-field TEM micrographs, recorded at different tilt angles, is fitted. From this fit the geometric centre and size of each DL in each micrograph can be extracted. Using a forward prediction approach each specific DL is identified in all the 2D projections. A system of linear equations can then be setup, linking the 3D position of each DL to its 2D position in each projection. If more than 2 projections are available this system of equations is over-determined, and the 3D position of each DL is found by least-squares fitting. The results are in good agreement with the damage microstructure recovered using a generalized weighted back-projection method. Importantly the triangulation approach requires fewer projections and is less sensitive to the angular range covered by the projections. Our new method is also less sensitive to contrast variations due to local deviations from the diffraction condition. These advantages, as well as the accuracy of the triangulation method, are discussed in detail. △ Less

Submitted 3 April, 2018; originally announced April 2018.

Consistent determination of geometrically necessary dislocation density from simulations and experiments

Authors: Suchandrima Das, Felix Hofmann, Edmund Tarleton

Abstract: The use of Nye's dislocation tensor for calculating the density of geometrically necessary dislocations (GND) is widely adopted in the study of plastically deformed materials. The curl operation involved in finding the Nye tensor, while conceptually straightforward has been marred with inconsistencies and several different definitions are in use. For the three most common definitions, we show that… ▽ More The use of Nye's dislocation tensor for calculating the density of geometrically necessary dislocations (GND) is widely adopted in the study of plastically deformed materials. The curl operation involved in finding the Nye tensor, while conceptually straightforward has been marred with inconsistencies and several different definitions are in use. For the three most common definitions, we show that their consistent application leads to the same result. To eliminate frequently encountered confusion, a summary of expressions for Nye's tensor in terms of elastic and plastic deformation gradient, and for both small and large deformations, is presented. A further question when estimating GND density concerns the optimization technique used to solve the under-determined set of equations linking Nye's tensor and GND density. A systematic comparison of the densities obtained by two widely used techniques, L1 and L2 minimisation, shows that both methods yield remarkably similar total GND densities. Thus the mathematically simpler, L2, may be preferred over L1 except when information about the distribution of densities on specific slip systems is required. To illustrate this, we compare experimentally measured lattice distortions beneath nano-indents in pure tungsten, probed using 3D-resolved synchrotron X-ray micro-diffraction, with those predicted by 3D strain-gradient crystal plasticity finite element calculations. The results are in good agreement and show that the volumetric component of the elastic strain field has a surprisingly small effect on the determined Nye tensor. This is important for experimental techniques, such as micro-beam Laue measurements and HR-EBSD, where only the deviatoric strain component is measured. △ Less

Submitted 15 June, 2018; v1 submitted 16 January, 2018; originally announced January 2018.

Comments: 66 pages, 15 figures, 7 appendices

Journal ref: Int. J. Plasticity 109 (2018) 18-42

Glancing-Incidence Focussed Ion Beam Milling: A Coherent X-ray Diffraction Study of 3D Nano-scale Lattice Strains and Crystal Defects

Authors: Felix Hofmann, Ross J. Harder, Wenjun Liu, Yuzi Liu, Ian K Robinson, Yevhen Zayachuk

Abstract: This study presents a detailed examination of the lattice distortions introduced by glancing incidence Focussed Ion Beam (FIB) milling. Using non-destructive multi-reflection Bragg coherent X-ray diffraction we probe damage formation in an initially pristine gold micro-crystal following several stages of FIB milling. These experiments allow access to the full lattice strain tensor in the micro-cry… ▽ More This study presents a detailed examination of the lattice distortions introduced by glancing incidence Focussed Ion Beam (FIB) milling. Using non-destructive multi-reflection Bragg coherent X-ray diffraction we probe damage formation in an initially pristine gold micro-crystal following several stages of FIB milling. These experiments allow access to the full lattice strain tensor in the micro-crystal with ~25 nm 3D spatial resolution, enabling a nano-scale analysis of residual lattice strains and defects formed. Our results show that 30 keV glancing incidence milling produces fewer large defects than normal incidence milling at the same energy. However the resulting residual lattice strains have similar magnitude and extend up to ~50 nm into the sample. At the edges of the milled surface, where the ion-beam tails impact the sample at near-normal incidence, large dislocation loops with a range of burgers vectors are formed. Further glancing incidence FIB polishing with 5 keV ion energy removes these dislocation loops and reduces the lattice strains caused by higher energy FIB milling. However, even at the lower ion energy, damage-induced lattice strains are present within a ~20 nm thick surface layer. These results highlight the need for careful consideration and management of FIB damage. They also show that low-energy FIB-milling is an effective tool for removing FIB-milling induced lattice strains. This is important for the preparation of micro-mechanical test specimens and strain microscopy samples. △ Less

Submitted 28 November, 2017; originally announced November 2017.

Comments: 21 pages, 9 figures

Spectral focusing of broadband silver electroluminescence in nanoscopic FRET-LEDs

Authors: Robin P. Puchert, Florian Steiner, Gerd Plechinger, Felix Hofmann, Ines Caspers, Johanna Kirschner, Philipp Nagler, Alexey Chernikov, Christian Schüller, Tobias Korn, Jan Vogelsang, Sebastian Bange, John M. Lupton

Abstract: Few inventions have shaped the world like the incandescent bulb. While Edison used thermal radiation from ohmically heated conductors, some noble metals exhibit "cold" electroluminescence (EL) in percolation films, tunnel diodes, electromigrated nanoparticle aggregates, optical antennae, or scanning-tunnelling microscopy (STM). The origin of this radiation, which is spectrally broad and depends on… ▽ More Few inventions have shaped the world like the incandescent bulb. While Edison used thermal radiation from ohmically heated conductors, some noble metals exhibit "cold" electroluminescence (EL) in percolation films, tunnel diodes, electromigrated nanoparticle aggregates, optical antennae, or scanning-tunnelling microscopy (STM). The origin of this radiation, which is spectrally broad and depends on applied bias, is controversial given the low radiative yields of electronic transitions. Nanoparticle EL is particularly intriguing since it involves localized surface-plasmon resonances with large dipole moments. Such plasmons enable very efficient non-radiative fluorescence resonance energy transfer (FRET) coupling to proximal resonant dipole transitions. We demonstrate nanoscopic FRET-LEDs which exploit the opposite process, energy transfer from silver nanoparticles to exfoliated monolayers of transition-metal dichalcogenides (TMDCs). In diffraction-limited hotspots showing pronounced photon bunching, broadband silver EL is focused into the narrow excitonic resonance of the atomically thin overlayer. Such devices may offer alternatives to conventional nano-LEDs in on-chip optical interconnects. △ Less

Submitted 13 February, 2017; originally announced February 2017.

Impact of charge carrier injection on single-chain photophysics of conjugated polymers

Authors: Felix J. Hofmann, Jan Vogelsang, John M. Lupton

Abstract: Charges in conjugated polymer materials have a strong impact on the photophysics and their interaction with the primary excited state species has to be taken into account in understanding device properties. Here, we employ single-molecule spectroscopy to unravel the influence of charges on several photoluminescence (PL) observables. The charges are injected either stochastically by a photochemical… ▽ More Charges in conjugated polymer materials have a strong impact on the photophysics and their interaction with the primary excited state species has to be taken into account in understanding device properties. Here, we employ single-molecule spectroscopy to unravel the influence of charges on several photoluminescence (PL) observables. The charges are injected either stochastically by a photochemical process, or deterministically in a hole-injection sandwich device configuration. We find that upon charge injection, besides a blue-shift of the PL emission and a shortening of the PL lifetime due to quenching and blocking of the lowest-energy chromophores, the non-classical photon arrival time distribution of the multichromophoric chain is modified towards a more classical distribution. Surprisingly, the fidelity of photon antibunching deteriorates upon charging, whereas one would actually expect the number of chromophores to be reduced. A qualitative model is presented to explain the observed PL changes. The results are of interest to developing a microscopic understanding of the intrinsic charge-exciton quenching interaction in devices. △ Less

Submitted 29 June, 2016; originally announced June 2016.

Time-dependent Mott transition in the periodic Anderson model with nonlocal hybridization

Authors: Felix Hofmann, Michael Potthoff

Abstract: The time-dependent Mott transition in a periodic Anderson model with off-site, nearest-neighbor hybridization is studied within the framework of nonequilibrium self-energy functional theory. Using the two-site dynamical-impurity approximation, we compute the real-time dynamics of the optimal variational parameter and of different observables initiated by sudden quenches of the Hubbard-U and identi… ▽ More The time-dependent Mott transition in a periodic Anderson model with off-site, nearest-neighbor hybridization is studied within the framework of nonequilibrium self-energy functional theory. Using the two-site dynamical-impurity approximation, we compute the real-time dynamics of the optimal variational parameter and of different observables initiated by sudden quenches of the Hubbard-U and identify the critical interaction. The time-dependent transition is orbital selective, i.e., in the final state, reached in the long-time limit after the quench to the critical interaction, the Mott gap opens in the spectral function of the localized orbitals only. We discuss the dependence of the critical interaction and of the final-state effective temperature on the hybridization strength and point out the various similarities between the nonequilibrium and the equilibrium Mott transition. It is shown that these can also be smoothly connected to each other by increasing the duration of a U-ramp from a sudden quench to a quasi-static process. The physics found for the model with off-site hybridization is compared with the dynamical Mott transition in the single-orbital Hubbard model and with the dynamical crossover found for the real-time dynamics of the conventional Anderson lattice with on-site hybridization. △ Less

Submitted 3 June, 2016; originally announced June 2016.

Comments: 12 pages, 10 figures

Journal ref: Eur. Phys. J. B 89, 178 (2016)

Coherent X-ray measurements of ion-implantation-induced lattice strains in nano-crystals

Authors: Felix Hofmann, Edmund Tarleton, Ross J. Harder, Nicholas W. Phillips, Jesse N. Clark, Ian K. Robinson, Brian Abbey, Wenjun Liu, Christian E. Beck

Abstract: Focussed Ion Beam (FIB) milling is a mainstay of nano-scale machining. By manipulating a tightly focussed beam of energetic ions, often gallium (Ga+), FIB can sculpt nanostructures via localised sputtering. This ability to cut solid matter on the nano-scale has revolutionised sample preparation across the life-, earth- and materials sciences. For example FIB is central to microchip prototyping, 3D… ▽ More Focussed Ion Beam (FIB) milling is a mainstay of nano-scale machining. By manipulating a tightly focussed beam of energetic ions, often gallium (Ga+), FIB can sculpt nanostructures via localised sputtering. This ability to cut solid matter on the nano-scale has revolutionised sample preparation across the life-, earth- and materials sciences. For example FIB is central to microchip prototyping, 3D material analysis, targeted electron microscopy sample extraction and the nanotechnology behind size-dependent material properties. Despite its widespread usage, detailed understanding of the functional consequences of FIB-induced structural damage, intrinsic to the technique, remains elusive. Here, we present nano-scale measurements of three-dimensional, FIB-induced lattice strains, probed using Bragg Coherent X-ray Diffraction Imaging (BCDI). We observe that even low gallium ion doses, typical of FIB imaging, cause substantial lattice distortions. At higher doses, extended self-organised defect structures appear, giving rise to stresses far in excess of the bulk yield limit. Combined with detailed numerical calculations, these observations provide fundamental insight into the nature of the damage created and the structural instabilities that lead to a surprisingly inhomogeneous morphology. △ Less

Submitted 30 March, 2016; originally announced March 2016.

Comments: 35 pages total, 12 figures total. Main text 16 pages 3 figures. Supplementary information 19 pages 9 figures

Nonequilibrium self-energy functional approach to the dynamical Mott transition

Authors: Felix Hofmann, Martin Eckstein, Michael Potthoff

Abstract: The real-time dynamics of the Fermi-Hubbard model, driven out of equilibrium by quenching or ramping the interaction parameter, is studied within the framework of the nonequilibrium self-energy functional theory. A dynamical impurity approximation with a single auxiliary bath site is considered as a reference system and the time-dependent hybridization is optimized as prescribed by the variational… ▽ More The real-time dynamics of the Fermi-Hubbard model, driven out of equilibrium by quenching or ramping the interaction parameter, is studied within the framework of the nonequilibrium self-energy functional theory. A dynamical impurity approximation with a single auxiliary bath site is considered as a reference system and the time-dependent hybridization is optimized as prescribed by the variational principle. The dynamical two-site approximation turns out to be useful to study the real-time dynamics on short and intermediate time scales. Depending on the strength of the interaction in the final state, two qualitatively different response regimes are observed. For both weak and strong couplings, qualitative agreement with previous results of nonequilibrium dynamical mean-field theory is found. The two regimes are sharply separated by a critical point at which the low-energy bath degree of freedom decouples in the course of time. We trace the dependence of the critical interaction of the dynamical Mott transition on the duration of the interaction ramp from sudden quenches to adiabatic dynamics, and therewith link the dynamical to the equilibrium Mott transition. △ Less

Submitted 2 June, 2016; v1 submitted 23 March, 2016; originally announced March 2016.

Comments: 12 pages, 11 figures

Journal ref: Phys. Rev. B 93, 235104 (2016)

Nonequilibrium variational-cluster approach to real-time dynamics in the Fermi-Hubbard model

Authors: Felix Hofmann, Martin Eckstein, Michael Potthoff

Abstract: The nonequilibrium variational-cluster approach is applied to study the real-time dynamics of the double occupancy in the one-dimensional Fermi-Hubbard model after different fast changes of hopping parameters. A simple reference system, consisting of isolated Hubbard dimers, is used to discuss different aspects of the numerical implementation of the approach in the general framework of nonequilibr… ▽ More The nonequilibrium variational-cluster approach is applied to study the real-time dynamics of the double occupancy in the one-dimensional Fermi-Hubbard model after different fast changes of hopping parameters. A simple reference system, consisting of isolated Hubbard dimers, is used to discuss different aspects of the numerical implementation of the approach in the general framework of nonequilibrium self-energy functional theory. Opposed to a direct solution of the Euler equation, its time derivative is found to serve as numerically tractable and stable conditional equation to fix the time-dependent variational parameters. △ Less

Submitted 14 April, 2016; v1 submitted 20 October, 2015; originally announced October 2015.

Comments: 16 pages, 5 figures

Journal ref: J. Phys.: Conf. Ser. 696, 012002 (2016)

Non-Contact Measurement of Thermal Diffusivity in Ion-Implanted Nuclear Materials

Authors: Felix Hofmann, Daniel R. Mason, Jeffrey K. Eliason, Alexei A. Maznev, Keith A. Nelson, Sergei L. Dudarev

Abstract: Knowledge of mechanical and physical property evolution due to irradiation damage is essential for the development of future fission and fusion reactors. Ion-irradiation provides an excellent proxy for studying irradiation damage, allowing high damage doses without sample activation. Limited ion-penetration-depth means that only few-micron-thick damaged layers are produced. Substantial effort has… ▽ More Knowledge of mechanical and physical property evolution due to irradiation damage is essential for the development of future fission and fusion reactors. Ion-irradiation provides an excellent proxy for studying irradiation damage, allowing high damage doses without sample activation. Limited ion-penetration-depth means that only few-micron-thick damaged layers are produced. Substantial effort has been devoted to probing the mechanical properties of these thin implanted layers. Yet, whilst key to reactor design, their thermal transport properties remain largely unexplored due to a lack of suitable measurement techniques. Here we demonstrate non-contact thermal diffusivity measurements in ion-implanted tungsten for nuclear fusion armour. Alloying with transmutation elements and the interaction of retained gas with implantation-induced defects both lead to dramatic reductions in thermal diffusivity. These changes are well captured by our modelling approaches. Our observations have important implications for the design of future fusion power plants. △ Less

Submitted 21 May, 2015; originally announced May 2015.

Comments: 15 pages, 3 figures

Lattice swelling and modulus change in a helium-implanted tungsten alloy: X-ray micro-diffraction, surface acoustic wave measurements, and multiscale modelling

Authors: F. Hofmann, D. Nguyen-Manh, C. E. Beck, J. K. Eliason, M. R. Gilbert, A. A. Maznev, W. Liu, D. E. J. Armstrong, K. A. Nelson, S. L. Dudarev

Abstract: Using X-ray micro-diffraction and surface acoustic wave spectroscopy, we measure lattice swelling and elastic modulus changes in a W-1%Re alloy after implantation with 3110 appm of helium. A fraction of a percent observed lattice expansion gives rise to an order of magnitude larger reduction in the surface acoustic wave velocity. A multiscale elasticity, molecular dynamics, and density functional… ▽ More Using X-ray micro-diffraction and surface acoustic wave spectroscopy, we measure lattice swelling and elastic modulus changes in a W-1%Re alloy after implantation with 3110 appm of helium. A fraction of a percent observed lattice expansion gives rise to an order of magnitude larger reduction in the surface acoustic wave velocity. A multiscale elasticity, molecular dynamics, and density functional theory model is applied to the interpretation of observations. The measured lattice swelling is consistent with the relaxation volume of self-interstitial and helium-filled vacancy defects that dominate the helium-implanted material microstructure. Molecular dynamics simulations confirm the elasticity model for swelling. Elastic properties of the implanted surface layer also change due to defects. The reduction of surface acoustic wave velocity predicted by density functional theory calculations agrees remarkably well with experimental observations. △ Less

Submitted 22 July, 2014; originally announced July 2014.

Comments: 36 pages, 6 figures, 3 tables. Presented at MRS Spring 2014

Nonequilibrium self-energy functional theory

Authors: Felix Hofmann, Martin Eckstein, Enrico Arrigoni, Michael Potthoff

Abstract: The self-energy functional theory (SFT) is generalized to describe the real-time dynamics of correlated lattice-fermion models far from thermal equilibrium. This is achieved by means of a reformulation of the original equilibrium theory in terms of double-time Green's functions on the Keldysh-Matsubara contour. We construct a functional which is stationary at the physical (nonequilibrium) self-ene… ▽ More The self-energy functional theory (SFT) is generalized to describe the real-time dynamics of correlated lattice-fermion models far from thermal equilibrium. This is achieved by means of a reformulation of the original equilibrium theory in terms of double-time Green's functions on the Keldysh-Matsubara contour. We construct a functional which is stationary at the physical (nonequilibrium) self-energy and which yields the grand potential of the initial thermal state at the physical point. Non-perturbative approximations can be defined by specifying a reference system that serves to generate trial self-energies. These self-energies are varied by varying the reference system's one-particle parameters on the Keldysh-Matsubara contour. In case of thermal equilibrium, the new approach reduces to the conventional SFT. However, "unphysical" variations, i.e., variations that are different on the upper and the lower branch of the Keldysh contour, must be considered to fix the time-dependence of the optimal physical parameters via the variational principle. Functional derivatives in the nonequilibrium SFT Euler equation are carried out analytically to derive conditional equations for the variational parameters that are accessible to a numerical evaluation via a time-propagation scheme. Approximations constructed by means of the nonequilibrium SFT are shown to be inherently causal, internally consistent and to respect macroscopic conservation laws resulting from gauge symmetries of the Hamiltonian. This comprises the nonequilibrium dynamical mean-field theory but also dynamical-impurity and variational-cluster approximations that are specified by reference systems with a finite number of degrees of freedom. In this way, non-perturbative and consistent approximations can be set up, the numerical evaluation of which is accessible to an exact-diagonalization approach. △ Less

Submitted 18 October, 2013; v1 submitted 26 June, 2013; originally announced June 2013.

Comments: 22 pages, 3 figures

Journal ref: Phys. Rev. B 88, 165124 (2013)

Intrinsic to extrinsic phonon lifetime transition in a GaAs-AlAs superlattice

Authors: Felix Hofmann, Jivtesh Garg, Alexei A Maznev, Adam Jandl, Mayank T Bulsara, Eugene A Fitzgerald, Gang Chen, Keith A Nelson

Abstract: We have measured the lifetimes of two zone-center longitudinal acoustic phonon modes, at 320 GHz and 640 GHz respectively, in a 14 nm GaAs / 2 nm AlAs superlattice structure. By comparing measurements at 296 K and 79 K we separate the intrinsic contribution to phonon lifetime determined by phonon-phonon scattering from the extrinsic contribution due to defects and interface roughness. At 296 K, th… ▽ More We have measured the lifetimes of two zone-center longitudinal acoustic phonon modes, at 320 GHz and 640 GHz respectively, in a 14 nm GaAs / 2 nm AlAs superlattice structure. By comparing measurements at 296 K and 79 K we separate the intrinsic contribution to phonon lifetime determined by phonon-phonon scattering from the extrinsic contribution due to defects and interface roughness. At 296 K, the 320-GHz phonon lifetime has approximately equal contributions from intrinsic and extrinsic scattering, whilst at 640 GHz it is dominated by extrinsic effects. These measurements are compared with first-principles lattice dynamics calculations of intrinsic and extrinsic scattering rates in the superlattice. The calculated room-temperature intrinsic lifetime of longitudinal phonons at 320 GHz is in agreement with the experimentally measured value of 0.9 ns. The model correctly predicts the transition from predominantly intrinsic to predominantly extrinsic scattering; however the predicted transition occurs at higher frequencies. Our analysis indicates that the 'interfacial atomic disorder' model is not entirely adequate and that the observed frequency dependence of the extrinsic scattering rate is likely to be determined by a finite correlation length of interface roughness. △ Less

Submitted 18 March, 2013; originally announced March 2013.

Comments: 21 pages, 5 figures

Lifetime of sub-THz coherent acoustic phonons in a GaAs-AlAs superlattice

Authors: A. A. Maznev, Felix Hofmann, Adam Jandl, Keivan Esfarjani, Mayank T. Bulsara, Eugene A. Fitzgerald, Gang Chen, Keith A. Nelson

Abstract: We measure the lifetime of the zone-center 340 GHz longitudinal phonon mode in a GaAs-AlAs superlattice excited and probed with femtosecond laser pulses. By comparing measurements conducted at room temperature and liquid nitrogen temperature we separate the intrinsic (phonon-phonon scattering) and extrinsic contributions to phonon relaxation. The estimated room temperature intrinsic lifetime of 0.… ▽ More We measure the lifetime of the zone-center 340 GHz longitudinal phonon mode in a GaAs-AlAs superlattice excited and probed with femtosecond laser pulses. By comparing measurements conducted at room temperature and liquid nitrogen temperature we separate the intrinsic (phonon-phonon scattering) and extrinsic contributions to phonon relaxation. The estimated room temperature intrinsic lifetime of 0.95 ns is compared to available calculations and experimental data for bulk GaAs. We conclude that ~0.3 THz phonons are in the transition zone between Akhiezer and Landau-Rumer regimes of phonon-phonon relaxation at room temperature. △ Less

Submitted 3 October, 2012; originally announced October 2012.

Journal ref: Appl. Phys. Lett. 102, 041901 (2013)

Femtosecond X-ray Laser induced transient electronic phase change observed in fullerene C60

Authors: Brian Abbey, Ruben A. Dilanian, Connie Darmanin, Rebecca A. Ryan, Corey T. Putkunz, Andrew V. Martin, Victor Streltsov, Michael W. M. Jones, Naylyn Gaffney, Felix Hofmann, Garth J. Williams, Sebastian Boutet, Marc Messerschmidt, M. Marvin Siebert, Sophie Williams, Evan Curwood, Eugeniu Balaur, Andrew G. Peele, Keith A. Nugent, Harry M. Quiney

Abstract: X-ray Free-Electron Lasers (XFELs) deliver X-ray pulses with a coherent flux that is approximately eight orders of magnitude greater than that available from a modern third generation synchrotron source. The power density in an XFEL pulse may be so high that it can modify the electronic properties of a sample on a femtosecond timescale. Exploration of the interaction of intense coherent X-ray puls… ▽ More X-ray Free-Electron Lasers (XFELs) deliver X-ray pulses with a coherent flux that is approximately eight orders of magnitude greater than that available from a modern third generation synchrotron source. The power density in an XFEL pulse may be so high that it can modify the electronic properties of a sample on a femtosecond timescale. Exploration of the interaction of intense coherent X-ray pulses and matter is of both intrinsic scientific interest, and of critical importance to the interpretation of experiments that probe the structures of materials using high-brightness femtosecond XFEL pulses. In this letter, we report observations of the diffraction of an extremely intense 32 fs nanofocused X-ray pulses by a powder sample of crystalline C60. We find that the diffraction pattern at the highest available incident power exhibits significant structural signatures that are absent in data obtained at both third-generation synchrotron sources or from XFEL sources operating at low output power. These signatures are consistent with a highly ordered structure that does not correspond with any previously known phase of crystalline C60. We argue that these data indicate the formation of a transient phase that is formed by a dynamic electronic distortion induced by inner-shell ionisation of at least one carbon atom in each C60 molecule. △ Less

Submitted 24 September, 2012; originally announced September 2012.

Comments: 9 pages, 3 figures