-
Materials for Fusion Energy: Key Challenges and Guiding Principles for Developing Under High Design Uncertainty
Authors:
David Cohen-Tanugi,
Myles G. Stapelberg,
Michael P. Short,
Sara E. Ferry,
Dennis G. Whyte,
Zachary S. Hartwig,
Tonio Buonassisi
Abstract:
Fusion energy is at an important inflection point in its development: multiple government agencies and private companies are now planning fusion pilot plants to deliver electricity to the grid in the next decade. However, realizing fusion as a technically and economically viable energy source depends on developing and qualifying materials that can withstand the extreme environment inside a fusion…
▽ More
Fusion energy is at an important inflection point in its development: multiple government agencies and private companies are now planning fusion pilot plants to deliver electricity to the grid in the next decade. However, realizing fusion as a technically and economically viable energy source depends on developing and qualifying materials that can withstand the extreme environment inside a fusion power plant. This Perspective seeks to engage the materials science community in this effort. We first outline the principal materials challenges and research opportunities for fusion. Next, we argue that fusion is distinct from other energy applications with respect to materials, not just in the magnitude and complexity of the technical challenges but also in the present level of uncertainty in materials design requirements. To address this, we finally propose a research framework based on an iterative co-evolution of materials science and fusion power plant design requirements.
△ Less
Submitted 20 November, 2023;
originally announced November 2023.
-
Characterisation of Corrosion Damage in T91/F91 steel exposed to Liquid Lead-Bismuth Eutectic
Authors:
M. T. Lapington,
M. Zhang,
M. P. Moody,
W. Y. Zhou,
M. P. Short,
F. Hofmann
Abstract:
T91 samples were exposed to static liquid lead-bismuth eutectic (LBE) at 700°C for 250-500 hours in either an oxidising or reducing environment. Corrosion damage was characterised using electron microscopy techniques, which identified networks of LBE intrusion beneath LBE-wetted surfaces. Under reducing conditions these networks are uniformly distributed, while they appear patchier and deeper unde…
▽ More
T91 samples were exposed to static liquid lead-bismuth eutectic (LBE) at 700°C for 250-500 hours in either an oxidising or reducing environment. Corrosion damage was characterised using electron microscopy techniques, which identified networks of LBE intrusion beneath LBE-wetted surfaces. Under reducing conditions these networks are uniformly distributed, while they appear patchier and deeper under oxidising conditions. The individual intrusions preferentially follow microstructural features, initially along prior-austenite grain boundaries, followed by penetration down martensite lath boundaries. Local depletion of Cr was observed within 4 μm of the intrusions and along intersecting boundaries, suggesting local Cr dissolution as the main corrosion mechanism.
△ Less
Submitted 7 February, 2023;
originally announced February 2023.
-
One Dimensional Wormhole Corrosion in Metals
Authors:
Yang Yang,
Weiyue Zhou,
Sheng Yin,
Sarah Y. Wang,
Qin Yu,
Matthew J. Olszta,
Ya-Qian Zhang,
Steven E. Zeltmann,
Mingda Li,
Miaomiao Jin,
Daniel K. Schreiber,
Jim Ciston,
M. C. Scott,
John R. Scully,
Robert O. Ritchie,
Mark Asta,
Ju Li,
Michael P. Short,
Andrew M. Minor
Abstract:
Corrosion is a ubiquitous failure mode of materials in extreme environments. The more localized it is, the more difficult it is to detect and more deleterious its effects. Often, the progression of localized corrosion is accompanied by the evolution of porosity in materials, creating internal void-structures that facilitate the ingress of the external environment into the interior of the material,…
▽ More
Corrosion is a ubiquitous failure mode of materials in extreme environments. The more localized it is, the more difficult it is to detect and more deleterious its effects. Often, the progression of localized corrosion is accompanied by the evolution of porosity in materials, creating internal void-structures that facilitate the ingress of the external environment into the interior of the material, further accelerating the internal corrosion. Previously, the dominant morphology of such void-structures has been reported to be either three-dimensional (3D) or two-dimensional (2D). Here, we report a more localized form of corrosion, which we call 1D wormhole corrosion. Using electron tomography, we show multiple examples of this 1D and percolating morphology that manifests a significantly high aspect ratio differentiable from 2D and 3D corrosion. To understand the origin of this mechanism in a Ni-Cr alloy corroded by molten salt, we combined energy-filtered four-dimensional scanning transmission electron microscopy (EF-4D-STEM) and ab initio density functional theory (DFT) calculations to develop a vacancy mapping method with nanometer-resolution, identifying a remarkably high vacancy concentration in the diffusion-induced grain boundary migration (DIGM) zone, up to 100 times the equilibrium value at the melting point. These vacancy supersaturation regions act as the precursors of wormholes, and lead to the asymmetrical growth of voids along GBs. We show that similar 1D penetrating corrosion morphologies could also occur in other materials or corrosion conditions, implying the broad impact of this extremely localized corrosion mechanism. Deciphering the origins of 1D corrosion is an important step towards designing structural materials with enhanced corrosion resistance, and also offers new pathways to create ordered-porous materials for functional applications.
△ Less
Submitted 30 March, 2022;
originally announced March 2022.
-
Revealing hidden defects through stored energy measurements of radiation damage
Authors:
Charles A. Hirst,
Fredric Granberg,
Boopathy Kombaiah,
Penghui Cao,
Scott Middlemas,
R. Scott Kemp,
Ju Li,
Kai Nordlund,
Michael P. Short
Abstract:
With full knowledge of a material's atomistic structure, it is possible to predict any macroscopic property of interest. In practice, this is hindered by limitations of the chosen characterisation techniques. For example, electron microscopy is unable to detect the smallest and most numerous defects in irradiated materials. Instead of spatial characterisation, we propose to detect and quantify def…
▽ More
With full knowledge of a material's atomistic structure, it is possible to predict any macroscopic property of interest. In practice, this is hindered by limitations of the chosen characterisation techniques. For example, electron microscopy is unable to detect the smallest and most numerous defects in irradiated materials. Instead of spatial characterisation, we propose to detect and quantify defects through their excess energy. Differential scanning calorimetry (DSC) of irradiated Ti measures defect densities 5 times greater than those determined using transmission electron microscopy (TEM). Our experiments also reveal two energetically-distinct processes where the established annealing model predicts one. Molecular dynamics (MD) simulations discover the defects responsible and inform a new mechanism for the recovery of irradiation-induced defects. The combination of annealing experiments and simulations can reveal defects hidden to other characterisation techniques, and has the potential to uncover new mechanisms behind the evolution of defects in materials.
△ Less
Submitted 14 June, 2022; v1 submitted 30 September, 2021;
originally announced September 2021.
-
Measuring Very Low Radiation Doses in PTFE for Nuclear Forensic Enrichment Reconstruction
Authors:
Rachel C. Connick,
Charles A. Hirst,
Kevin B. Woller,
Julie V. Logan,
R. Scott Kemp,
Michael P. Short
Abstract:
Every country that has made nuclear weapons has used uranium enrichment. Despite the centrality of this technology to international security, there is still no reliable physical marker of past enrichment that can be used to perform forensic verification of historically produced weapons. We show that the extremely low radioactivity from uranium alpha emissions during enrichment leaves detectable an…
▽ More
Every country that has made nuclear weapons has used uranium enrichment. Despite the centrality of this technology to international security, there is still no reliable physical marker of past enrichment that can be used to perform forensic verification of historically produced weapons. We show that the extremely low radioactivity from uranium alpha emissions during enrichment leaves detectable and irreversible calorimetric signatures in the common enrichment gasket material PTFE, allowing for historical reconstruction of past enrichment activities at a sensitivity better than one weapon's quantity of highly enriched uranium. Fast scanning calorimetry also enables the measurement of recrystallization enthalpies of sequentially microtomed slices, confirming the magnitude and the type of radiation exposure while also providing a detection of tampering and a method for analyzing field samples useful for treaty verification. This work opens the door for common items to be turned into precise dosimeters to detect the past presence of radioactivity, nuclear materials, and related activities with high confidence.
△ Less
Submitted 17 July, 2021;
originally announced July 2021.
-
The dynamic evolution of swelling in nickel concentrated solid solution alloys through in situ property monitoring
Authors:
Cody A. Dennett,
Benjamin R. Dacus,
Christopher M. Barr,
Trevor Clark,
Hongbin Bei,
Yanwen Zhang,
Michael P. Short,
Khalid Hattar
Abstract:
Defects and microstructural features spanning the atomic level to the microscale play deterministic roles in the expressed properties of materials. Yet studies of material evolution in response to environmental stimuli most often correlate resulting performance with one dominant microstructural feature only. Here, the dynamic evolution of swelling in a series of Ni-based concentrated solid solutio…
▽ More
Defects and microstructural features spanning the atomic level to the microscale play deterministic roles in the expressed properties of materials. Yet studies of material evolution in response to environmental stimuli most often correlate resulting performance with one dominant microstructural feature only. Here, the dynamic evolution of swelling in a series of Ni-based concentrated solid solution alloys under high-temperature irradiation exposure is observed using continuous, in situ measurements of thermoelastic properties in bulk specimens. Unlike traditional evaluation techniques which account only for volumetric porosity identified using electron microscopy, direct property evaluation provides an integrated response across all defect length scales. In particular, the evolution in elastic properties during swelling is found to depend significantly on the entire size spectrum of defects, from the nano- to meso-scales, some of which are not resolvable in imaging. Observed changes in thermal transport properties depend sensitively on the partitioning of electronic and lattice thermal conductivity. This emerging class of in situ experiments, which directly measure integrated performance in relevant conditions, provides unique insight into material dynamics otherwise unavailable using traditional methods.
△ Less
Submitted 16 September, 2021; v1 submitted 29 April, 2021;
originally announced April 2021.
-
Non-contact, non-destructive mapping of thermal diffusivity and surface acoustic wave speed using transient grating spectroscopy
Authors:
Abdallah Reza,
Cody A. Dennett,
Michael P. Short,
John Waite,
Yevhen Zayachuk,
Christopher M. Magazzeni,
Simon Hills,
Felix Hofmann
Abstract:
We present new developments of the laser-induced transient grating spectroscopy (TGS) technique that enable the measurement of large area 2D maps of thermal diffusivity and surface acoustic wave speed. Additional capabilities include targeted measurements and the ability to accommodate samples with increased surface roughness. These new capabilities are demonstrated by recording large TGS maps of…
▽ More
We present new developments of the laser-induced transient grating spectroscopy (TGS) technique that enable the measurement of large area 2D maps of thermal diffusivity and surface acoustic wave speed. Additional capabilities include targeted measurements and the ability to accommodate samples with increased surface roughness. These new capabilities are demonstrated by recording large TGS maps of deuterium implanted tungsten, linear friction welded aerospace alloys and high entropy alloys with a range of grain sizes. The results illustrate the ability to view grain microstructure in elastically anisotropic samples, and to detect anomalies in samples, for example due to irradiation and previous measurements. They also point to the possibility of using TGS to quantify grain size at the surface of polycrystalline materials.
△ Less
Submitted 4 February, 2020;
originally announced February 2020.
-
Proton Irradiation-Decelerated Intergranular Corrosion of Ni-Cr Alloys in Molten Salt
Authors:
Weiyue Zhou,
Yang Yang,
Guiqiu Zheng,
Kevin B Woller,
Peter W Stahle,
Andrew M Minor,
Michael P Short
Abstract:
The effects of ionizing radiation on materials often reduce to "bad news." Radiation damage usually leads to detrimental effects such as embrittlement, accelerated creep, phase instability, and radiation-altered corrosion. This last point merits special attention. Elucidating synergies between radiation and corrosion has been one of the most challenging tasks impeding the deployment of advanced re…
▽ More
The effects of ionizing radiation on materials often reduce to "bad news." Radiation damage usually leads to detrimental effects such as embrittlement, accelerated creep, phase instability, and radiation-altered corrosion. This last point merits special attention. Elucidating synergies between radiation and corrosion has been one of the most challenging tasks impeding the deployment of advanced reactors, stemming from the combined effects of high temperature, corrosive coolants, and intense particle fluxes. Here we report that proton irradiation significantly and repeatably decelerates intergranular corrosion of Ni-Cr alloys in molten fluoride salt at 650C. We demonstrate this effect by showing that the depth of intergranular voids resulting from Cr leaching into the salt is reduced by the proton irradiation alone. Interstitial defects generated from proton irradiation result in radiation-enhanced diffusion, more rapidly replenishing corrosion-injected vacancies with alloy constituents, thus playing the crucial role in decelerating corrosion. Our results show that in industrially-relevant scenarios irradiation can have a positive impact, challenging our view that radiation damage always results in negative effects.
△ Less
Submitted 26 November, 2019;
originally announced November 2019.
-
Transient grating spectroscopy: An ultrarapid, nondestructive materials evaluation technique
Authors:
Felix Hofmann,
Michael P. Short,
Cody A. Dennett
Abstract:
Structure-property relationships are the foundation of materials science. Linking microstructure and material properties is essential for predicting material response to driving forces, managing in-service material degradation, and engineering materials for optimal performance. Elastic, thermal, and acoustic properties provide a convenient gateway to directly or indirectly probe material structure…
▽ More
Structure-property relationships are the foundation of materials science. Linking microstructure and material properties is essential for predicting material response to driving forces, managing in-service material degradation, and engineering materials for optimal performance. Elastic, thermal, and acoustic properties provide a convenient gateway to directly or indirectly probe material structure across multiple length scales. We review how using the laser-induced transient grating spectroscopy (TGS) technique, which uses a transient diffraction grating to generate surface acoustic waves (SAWs) and temperature gratings on a material surface, non-destructively reveals the material elasticity, thermal diffusivity, and energy dissipation on the sub-microsecond timescale, within a tunable sub-surface depth. This technique has already been applied to many challenging problems in materials characterization, from analysis of radiation damage, to colloidal crystals, to phonon-mediated thermal transport in nanostructured systems, to crystal orientation and lattice parameter determination. Examples of these applications, as well as inferring aspects of microstructural evolution, illustrate the wide potential reach of TGS to solve old materials challenges, and to uncover new science. We conclude by looking ahead at the tremendous potential of TGS for materials discovery and optimization when applied in situ to dynamically evolving systems.
△ Less
Submitted 6 August, 2019;
originally announced August 2019.