-
Single-exposure elemental differentiation and texture-sensitive phase-retrieval imaging with a neutron counting micro-channel plate detector
Authors:
Benedicta D. Arhatari,
David M. Paganin,
Henry Kirkwood,
Anton S. Tremsin,
Timur E. Gureyev,
Alexander M. Korsunsky,
Winfried Kockelmann,
Felix Hofmann,
Eric Huwald,
Shu-Yan Zhang,
Joe Kelleher,
Brian Abbey
Abstract:
Micro-channel plate (MCP) detectors, when used at pulsed-neutron-source instruments, offer the possibility of high spatial resolution and high contrast imaging with pixel-level spectroscopic information. Here we demonstrate the possibility of multimodal analysis including total neutron cross-section spectra measurements, quantitative material differentiation imaging and texture-sensitive in-line p…
▽ More
Micro-channel plate (MCP) detectors, when used at pulsed-neutron-source instruments, offer the possibility of high spatial resolution and high contrast imaging with pixel-level spectroscopic information. Here we demonstrate the possibility of multimodal analysis including total neutron cross-section spectra measurements, quantitative material differentiation imaging and texture-sensitive in-line phase imaging, from a single exposure using an MCP detector. This multimodal approach operates in full-field imaging mode, with the neutron transmission spectra acquired at each individual detector pixel. Due to the polychromatic nature of the beam and spectroscopic resolving capability of the detector, no energy scanning is required. Good agreement with the library reference data is demonstrated for neutron cross-section spectra measurements. Two different images corresponding to two selected energy bandwidths are used for elemental differentiation imaging. Moreover, the presence of changes in texture, i.e., preferred grain orientation, in the sample is identified from our phase-retrieval imaging results.
△ Less
Submitted 27 April, 2024; v1 submitted 8 November, 2023;
originally announced November 2023.
-
Terahertz s-SNOM reveals nanoscale conductivity of graphene
Authors:
Henrik B. Lassen,
Edmund J. R. Kelleher,
Leonid Iliushyn,
Timothy J. Booth,
Peter Bøggild,
Peter U. Jepsen
Abstract:
The nanoscale contrast in scattering-type scanning near-field optical microscopy (s-SNOM) is determined by the optical properties of the sample immediately under the apex of the tip of the atomic force microscope (AFM). There are several models that describe the optical scattering of an incident field by the tip near a surface, and these models have been successful in relating the measured scatter…
▽ More
The nanoscale contrast in scattering-type scanning near-field optical microscopy (s-SNOM) is determined by the optical properties of the sample immediately under the apex of the tip of the atomic force microscope (AFM). There are several models that describe the optical scattering of an incident field by the tip near a surface, and these models have been successful in relating the measured scattering signal to the dielectric function of the sample under the tip. Here, we address a situation that is normally not considered in the existing interaction models, namely the near-field signal arising from thin, highly conductive films in the terahertz (THz) frequency range. According to established theoretical models, highly conductive thin films should show insignificant contrast in the THz range for small variations in conductivity, therefore hindering the use of s-SNOM for nanoscale characterisation. We experimentally demonstrate unexpected but clear and quantifiable layer contrast in the THz s-SNOM signal from few-layer exfoliated graphene as well as subtle nanoscale contrast variations within graphene layers. We use finite-element simulations to confirm that the observed contrast is described by the classical electromagnetics of the scattering mechanism, suggesting that the dipole models must be reformulated to correctly describe the interaction with conductive samples.
△ Less
Submitted 20 October, 2023; v1 submitted 11 October, 2023;
originally announced October 2023.
-
Electronic structure of semiconductor nanostructures: A modified localization landscape theory
Authors:
D. Chaudhuri,
J. C. Kelleher,
M. R. O'Brien,
E. P. O'Reilly,
S. Schulz
Abstract:
In this paper we present a modified localization landscape theory to calculate localized/confined electron and hole states and the corresponding energy eigenvalues without solving a (large) eigenvalue problem. We motivate and demonstrate the benefit of solving $\hat{H}^2u=1$ in the modified localization landscape theory in comparison to $\hat{H}u=1$, solved in the localization landscape theory. We…
▽ More
In this paper we present a modified localization landscape theory to calculate localized/confined electron and hole states and the corresponding energy eigenvalues without solving a (large) eigenvalue problem. We motivate and demonstrate the benefit of solving $\hat{H}^2u=1$ in the modified localization landscape theory in comparison to $\hat{H}u=1$, solved in the localization landscape theory. We detail the advantages by fully analytic considerations before targeting the numerical calculation of electron and hole states and energies in III-N heterostructures. We further discuss how the solution of $\hat{H}^2u=1$ is used to extract an effective potential $W$ that is comparable to the effective potential obtained from $\hat{H}u=1$, ensuring that it can for instance be used to introduce quantum corrections to drift-diffusion transport calculations. Overall, we show that the proposed modified localization landscape theory keeps all the benefits of the recently introduced localization landscape theory but further improves factors such as convergence of the calculated energies and the robustness of the method against the chosen integration region for $u$ to obtain the corresponding energies. We find that this becomes especially important for here studied $c$-plane InGaN/GaN quantum wells with higher In contents. All these features make the proposed approach very attractive for calculation of localized states in highly disordered systems, where partitioning the systems into different subregions can be difficult.
△ Less
Submitted 31 December, 2019; v1 submitted 16 October, 2019;
originally announced October 2019.
-
Design of a High Strength, High Ductility 12 wt% Mn Medium Manganese Steel With Hierarchical Deformation Behaviour
Authors:
T W J Kwok,
K M Rahman,
X Xu,
I Bantounas,
J F Kelleher,
S Daswari,
T Alam,
R Banerjee,
D Dye
Abstract:
A novel medium Mn steel of composition Fe-12Mn-4.8Al-2Si-0.32C-0.3V was manufactured with 1.09 GPa yield strength, 1.26 GPa tensile strength and 54% elongation. The thermomechanical process route was designed to be industrially translatable and consists of hot and then warm rolling before a 30 min intercritical anneal. The resulting microstructure comprised of coarse elongated austenite grains in…
▽ More
A novel medium Mn steel of composition Fe-12Mn-4.8Al-2Si-0.32C-0.3V was manufactured with 1.09 GPa yield strength, 1.26 GPa tensile strength and 54% elongation. The thermomechanical process route was designed to be industrially translatable and consists of hot and then warm rolling before a 30 min intercritical anneal. The resulting microstructure comprised of coarse elongated austenite grains in the rolling direction surrounded by necklace layers of fine austenite and ferrite grains. The tensile behaviour was investigated by in-situ neutron diffraction and the evolution of microstructure studied with Electron Backscattered Diffraction (EBSD). It was found that the coarse austenite grains contributed to the first stage of strain hardening by transforming into martensite and the fine austenite necklace grains contributed to the second stage of strain hardening by a mixture of twinning and transformation induced plasticity (TWIP and TRIP) mechanisms. This hierarchical deformation behaviour contributed to the exceptional ductility of this steel.
△ Less
Submitted 21 April, 2020; v1 submitted 20 August, 2019;
originally announced August 2019.
-
Scalar Nanosecond Pulse Generation in a Nanotube Mode-Locked Environmentally Stable Fiber Laser
Authors:
R. I. Woodward,
E. J. R. Kelleher,
D. Popa,
T. Hasan,
F. Bonaccorso,
A. C. Ferrari,
S. V. Popov,
J. R. Taylor
Abstract:
We report an environmentally stable nanotube mode-locked fibre laser producing linearly-polarized, nanosecond pulses. A simple all-polarization-maintaining fibre ring cavity is used, including 300 m of highly nonlinear fibre to elongate the cavity and increase intracavity dispersion and nonlinearity. The laser generates scalar pulses with a duration of 1.23 ns at a centre wavelength of 1042 nm, wi…
▽ More
We report an environmentally stable nanotube mode-locked fibre laser producing linearly-polarized, nanosecond pulses. A simple all-polarization-maintaining fibre ring cavity is used, including 300 m of highly nonlinear fibre to elongate the cavity and increase intracavity dispersion and nonlinearity. The laser generates scalar pulses with a duration of 1.23 ns at a centre wavelength of 1042 nm, with 1.3-nm bandwidth and at 641-kHz repetition rate. Despite the long cavity, the output characteristics show no significant variation when the cavity is perturbed, and the degree of polarization remains at 97%.
△ Less
Submitted 7 May, 2018;
originally announced May 2018.
-
Characterization of the second- and third-order nonlinear optical susceptibilities of monolayer MoS$_2$ using multiphoton microscopy
Authors:
R. I. Woodward,
R. T. Murray,
C. F. Phelan,
R. E. P. de Oliveira,
T. H. Runcorn,
E. J. R. Kelleher,
S. Li,
E. C. de Oliveira,
G. J. M. Fechine,
G. Eda,
C. J. S. de Matos
Abstract:
We report second- and third-harmonic generation in monolayer MoS$_\mathrm{2}$ as a tool for imaging and accurately characterizing the material's nonlinear optical properties under 1560 nm excitation. Using a surface nonlinear optics treatment, we derive expressions relating experimental measurements to second- and third-order nonlinear sheet susceptibility magnitudes, obtaining values of…
▽ More
We report second- and third-harmonic generation in monolayer MoS$_\mathrm{2}$ as a tool for imaging and accurately characterizing the material's nonlinear optical properties under 1560 nm excitation. Using a surface nonlinear optics treatment, we derive expressions relating experimental measurements to second- and third-order nonlinear sheet susceptibility magnitudes, obtaining values of $|χ_s^{(2)}|=2.0\times10^{-20}$ m$^2$ V$^{-1}$ and for the first time for monolayer MoS$_\mathrm{2}$, $|χ_s^{(3)}|=1.7\times10^{-28}$ m$^3$ V$^{-2}$. These sheet susceptibilities correspond to effective bulk nonlinear susceptibility values of $|χ_{b}^{(2)}|=2.9\times10^{-11}$ m V$^{-1}$ and $|χ_{b}^{(3)}|=2.4\times10^{-19}$ m$^2$ V$^{-2}$, accounting for the sheet thickness. Experimental comparisons between MoS$_\mathrm{2}$ and graphene are also performed, demonstrating $\sim$3.4 times stronger third-order sheet nonlinearity in monolayer MoS$_\mathrm{2}$, highlighting the material's potential for nonlinear photonics in the telecommunications C band.
△ Less
Submitted 15 November, 2016; v1 submitted 26 June, 2016;
originally announced June 2016.
-
Theory of edge-state optical absorption in two-dimensional transition metal dichalcogenide flakes
Authors:
Maxim Trushin,
Edmund J. R. Kelleher,
Tawfique Hasan
Abstract:
We develop an analytical model to describe sub-bandgap optical absorption in two-dimensional semiconducting transition metal dichalcogenide (s-TMD) nanoflakes. The material system represents an array of few-layer molybdenum disulfide crystals, randomly orientated in a polymer matrix. We propose that optical absorption involves direct transitions between electronic edge-states and bulk-bands, depen…
▽ More
We develop an analytical model to describe sub-bandgap optical absorption in two-dimensional semiconducting transition metal dichalcogenide (s-TMD) nanoflakes. The material system represents an array of few-layer molybdenum disulfide crystals, randomly orientated in a polymer matrix. We propose that optical absorption involves direct transitions between electronic edge-states and bulk-bands, depends strongly on the carrier population, and is saturable with sufficient fluence. For excitation energies above half the bandgap, the excess energy is absorbed by the edge-state electrons, elevating their effective temperature. Our analytical expressions for the linear and nonlinear absorption could prove useful tools in the design of practical photonic devices based on s-TMDs.
△ Less
Submitted 10 October, 2016; v1 submitted 19 February, 2016;
originally announced February 2016.
-
Surfactant-aided exfoliation of molydenum disulphide for ultrafast pulse generation through edge-state saturable absorption
Authors:
Richard C. T. Howe,
Robert I. Woodward,
Guohua Hu,
Zongyin Yang,
Edmund J. R. Kelleher,
Tawfique Hasan
Abstract:
We use liquid phase exfoliation to produce dispersions of molybdenum disulphide (MoS2) nanoflakes in aqueous surfactant solutions. The chemical structures of the bile salt surfactants play a crucial role in the exfoliation and stabilization of MoS2. The resultant MoS2 dispersions are heavily enriched in single and few (<6) layer flakes with large edge to surface area ratio. We use the dispersions…
▽ More
We use liquid phase exfoliation to produce dispersions of molybdenum disulphide (MoS2) nanoflakes in aqueous surfactant solutions. The chemical structures of the bile salt surfactants play a crucial role in the exfoliation and stabilization of MoS2. The resultant MoS2 dispersions are heavily enriched in single and few (<6) layer flakes with large edge to surface area ratio. We use the dispersions to fabricate free-standing polymer composite wide-band saturable absorbers to develop mode-locked and Q- switched fibre lasers, tunable from 1535-1565 and 1030-1070 nm, respectively. We attribute this sub-bandgap optical absorption and its nonlinear saturation behaviour to edge-mediated states introduced within the material band-gap of the exfoliated MoS2 nanoflakes.
△ Less
Submitted 11 December, 2015; v1 submitted 7 August, 2015;
originally announced August 2015.
-
Tm-doped fiber laser mode-locked by graphene-polymer composite
Authors:
M. Zhang,
E. J. R. Kelleher,
F. Torrisi,
Z. Sun,
T. Hasan,
D. Popa,
F. Wang,
A. C. Ferrari,
S. V. Popov,
J. R. Taylor
Abstract:
We demonstrate mode-locking of a thulium-doped fiber laser operating at 1.94μm, using a graphene-based saturable absorber. The laser outputs 3.6ps pulses, with~0.4nJ energy and an amplitude fluctuation~0.5%, at 6.46MHz. This is a simple, low-cost, stable and convenient laser oscillator for applications where eye-safe and low-photon-energy light sources are required, such as sensing and biomedical…
▽ More
We demonstrate mode-locking of a thulium-doped fiber laser operating at 1.94μm, using a graphene-based saturable absorber. The laser outputs 3.6ps pulses, with~0.4nJ energy and an amplitude fluctuation~0.5%, at 6.46MHz. This is a simple, low-cost, stable and convenient laser oscillator for applications where eye-safe and low-photon-energy light sources are required, such as sensing and biomedical diagnostics
△ Less
Submitted 8 August, 2012;
originally announced August 2012.
-
Wideband tunable, graphene-mode locked, ultrafast laser
Authors:
Z. Sun,
D. Popa,
T. Hasan,
F. Torrisi,
F. Wang,
E. J. R. Kelleher,
J. C. Travers,
A. C. Ferrari
Abstract:
We report a tunable ultrafast fiber laser mode-locked with a graphene saturable absorber. The linear dispersions of the Dirac electrons in graphene enable wideband tunability. We get ~1ps pulses, tunable between 1525 and 1559nm, demonstrating graphene as a broadband saturable absorber.
We report a tunable ultrafast fiber laser mode-locked with a graphene saturable absorber. The linear dispersions of the Dirac electrons in graphene enable wideband tunability. We get ~1ps pulses, tunable between 1525 and 1559nm, demonstrating graphene as a broadband saturable absorber.
△ Less
Submitted 24 March, 2010;
originally announced March 2010.
