Showing 1–50 of 106 results for author: Hsu, H

High-Q Slow-Wave Coplanar Waveguides

Authors: Heng-Chia Hsu, Kaushik Dasgupta, Nathan M. Neihart, Sudip Shekhar, Jeffrey S. Walling, David J. Allstot

Abstract: A comprehensive study of methods of maximizing Q for slow-wave coplanar waveguides is described. In addition to the widths of the signal conductor and coplanar ground lines and the distance between them, the length, spacing and stacking of the metal layers of the substrate shield strips are also shown to be critical in maximizing performance. Measured results from more than 50 different devices sh… ▽ More A comprehensive study of methods of maximizing Q for slow-wave coplanar waveguides is described. In addition to the widths of the signal conductor and coplanar ground lines and the distance between them, the length, spacing and stacking of the metal layers of the substrate shield strips are also shown to be critical in maximizing performance. Measured results from more than 50 different devices show that a 7X increase in the quality factor (e.g., Q > 70 at 24 GHz in 0.18 μm CMOS) is achievable using the optimum topology with optimum dimensions. △ Less

Submitted 16 August, 2024; originally announced August 2024.

Comments: 14 pages, 17 figures

Large positive magnetoconductance in carbon nanoscrolls

Authors: Yu-Jie Zhong, Xuan-Fu Huang, Ting-Zhen Chen, Jia-Ren Zhang, Jia-Cheng Li, Angus Huang, Hsiu-Chuan Hsu, Carmine Ortix, Ching-Hao Chang

Abstract: We theoretically demonstrate that carbon nanoscrolls -- spirally wrapped graphene layers with open endpoints -- can be characterized by a large positive magnetoconductance. We show that when a carbon nanoscroll is subject to an axial magnetic field of ~ 10T, the ballistic conductance at low carrier densities of the nanoscroll has an increase of about 200%. Importantly, we find that this positive m… ▽ More We theoretically demonstrate that carbon nanoscrolls -- spirally wrapped graphene layers with open endpoints -- can be characterized by a large positive magnetoconductance. We show that when a carbon nanoscroll is subject to an axial magnetic field of ~ 10T, the ballistic conductance at low carrier densities of the nanoscroll has an increase of about 200%. Importantly, we find that this positive magnetoconductance is not only preserved but can be even enhanced in the presence of on-site disorder. We prove that the positive magnetoconductance comes about the emergence of magnetic field-induced zero energy modes, specific of rolled-up geometries. Our results establish curved graphene systems as a new material platform displaying sizable magnetoresistive phenomena. △ Less

Submitted 6 August, 2024; originally announced August 2024.

Comments: 13 pages, 4 figures

Probing entanglement dynamics and topological transitions on noisy intermediate-scale quantum computers

Authors: Huai-Chun Chang, Hsiu-Chuan Hsu, Yu-Cheng Lin

Abstract: We simulate quench dynamics of the Su-Schrieffer-Heeger (SSH) chain on the IBM quantum computers, calculating the Rényi entanglement entropy, the twist order parameter and the Berry phase. The latter two quantities can be deduced from a slow-twist operator defined in the Lieb-Schultz-Mattis theorem. The Rényi entropy is obtained using a recently developed randomized measurement scheme. The twist o… ▽ More We simulate quench dynamics of the Su-Schrieffer-Heeger (SSH) chain on the IBM quantum computers, calculating the Rényi entanglement entropy, the twist order parameter and the Berry phase. The latter two quantities can be deduced from a slow-twist operator defined in the Lieb-Schultz-Mattis theorem. The Rényi entropy is obtained using a recently developed randomized measurement scheme. The twist order parameter and the Berry phase are measured without the need for additional gates or ancilla qubits. We consider quench protocols in which a trivial initial state evolves dynamically in time under the topological SSH Hamiltonian in the fully dimerized limit (the flat-band limit). During these quenches, there are persistent and periodic oscillations in the time evolution of both entanglement entropy and twist order parameter. Through the implementation of error mitigation techniques using a global depolarizing ansatz and postselection, our simulations on the IBM devices yield results that closely match exact solutions. △ Less

Submitted 17 June, 2024; v1 submitted 14 June, 2024; originally announced June 2024.

Comments: 9 pages, 11 figures

Emergent topological magnetism in Hund's excitonic insulator

Authors: R. Okuma, K. Yamagami, Y. Fujisawa, C. H. Hsu, Y. Obata, N. Tomoda, M. Dronova, K. Kuroda, H. Ishikawa, K. Kawaguchi, K. Aido, K. Kindo, Y. H. Chan, H. Lin, Y. Ihara, T. Kondo, Y. Okada

Abstract: Analogous to the charged electron-electron pair condensation in superconductors, an excitonic insulator (EI) represents Fermi surface instability due to spontaneous formation and condensation of charge-neutral electron-hole pair (exciton). Unlike in superconductors, however, the charge-neutral nature of exciton makes probing emergent EI phase via macroscopic physical properties generally difficult… ▽ More Analogous to the charged electron-electron pair condensation in superconductors, an excitonic insulator (EI) represents Fermi surface instability due to spontaneous formation and condensation of charge-neutral electron-hole pair (exciton). Unlike in superconductors, however, the charge-neutral nature of exciton makes probing emergent EI phase via macroscopic physical properties generally difficult. Here, we propose a van der Waals coupled antiferromagnetic semiconductor GdGaI (GGI) as a new material category leading to emergent multi-q magnet intertwined with spontaneous exciton formation/condensation. Before excitonic band hybridization, a simple picture for the parent electronic state consists of electron (Gd-derived 5d) and hole (Ga-derived 4p) delocalized bands, together with Gd-derived 4f localized antiferromagnets with S = 7/2 classical nature. Through intra Gd atom 4f-5d Hund's coupling, a notable finding is the emergent minimum length scale (2a) Skyrmion-like spin texture resulting from spontaneous condensation/formation of spin-polarized exciton with BCS-BEC crossover phenomenology. This discovered platform is promising for realizing valuable quantum matter on the nanoscale; our finding will provide significant insight into designing the atomic scale topological magnetism out of itinerant systems. △ Less

Submitted 26 May, 2024; originally announced May 2024.

Comments: 23 pages, 10 figures

Formation of Iron-Helium Compounds under High Pressure

Authors: Haruki Takezawa, Han Hsu, Kei Hirose, Fumiya Sakai, Suyu Fu, Hitoshi Gomi

Abstract: While helium is a representative noble gas element characterized by its chemical inertness at ambient conditions, recent experiments and calculations argued that a minor amount of helium is incorporated into molten iron from silicate under high pressures. Here we examined the reaction between iron and helium at 8-42 GPa and ~1000-2820 K and found remarkable volume expansion of the Fe lattice, whic… ▽ More While helium is a representative noble gas element characterized by its chemical inertness at ambient conditions, recent experiments and calculations argued that a minor amount of helium is incorporated into molten iron from silicate under high pressures. Here we examined the reaction between iron and helium at 8-42 GPa and ~1000-2820 K and found remarkable volume expansion of the Fe lattice, which is attributed to the formations of fcc and distorted hcp iron-helium compounds with x in FeHex up to 0.13 and 0.42, respectively. Upon releasing pressure under room temperature, these fcc and distorted hcp FeHex were still observed while the former lost some helium. In addition, our first-principles calculations indicate that fcc FeHe0.25, with He atoms in the tetrahedral interstitial sites, is dynamically stable in different magnetic states throughout 0-50 GPa. These results support that the Earth's core can be a large reservoir of primordial 3He. △ Less

Submitted 20 May, 2024; originally announced May 2024.

Comments: 30 pages, 14 figures, 4 tables

Vortex nucleations in spinor Bose condensates under localized synthetic magnetic fields

Authors: L. -R. Liu, S. -C. Wu, T. -W. Liu, H. -Y. Hsu, T. -K. Shen, S. -K. Yip, Y. Kawaguchi, Y. -J. Lin

Abstract: Gauge fields are ubiquitous in modern quantum physics. In superfluids, quantized vortices can be induced by gauge fields. Here we demonstrate the first experimental observation of vortex nucleations in spinor Bose-Einstein Condensates under radially-localized synthetic magnetic fields. The associated gauge potentials $\vec{A}$ are azimuthal and created by light-induced spin-orbital-angular-momentu… ▽ More Gauge fields are ubiquitous in modern quantum physics. In superfluids, quantized vortices can be induced by gauge fields. Here we demonstrate the first experimental observation of vortex nucleations in spinor Bose-Einstein Condensates under radially-localized synthetic magnetic fields. The associated gauge potentials $\vec{A}$ are azimuthal and created by light-induced spin-orbital-angular-momentum coupling, generating circulating azimuthal velocity fields $\propto \vec{p}-\vec{A}$ even when the canonical momentum $\vec{p}= 0$. A sufficiently large azimuthal velocity peaked near the condensate center results in a dynamically unstable localized excitation that initiates vortex nucleations. This excitation appears as a spontaneously-formed vortex-antivortex pair near the cloud center. Following the initially developed instability, the dynamics is governed by the asymmetry and dissipation, where the atomic orbital angular momentum evolves and can reach the value of the ground state. Our system exhibits dynamical and Landau instabilities and agrees reasonably with time-dependent Gross-Pitaevskii simulations. △ Less

Submitted 26 March, 2024; originally announced March 2024.

From Stoner to Local Moment Magnetism in Atomically Thin Cr2Te3

Authors: Yong Zhong, Cheng Peng, Haili Huang, Dandan Guan, Jinwoong Hwang, Kuan H. Hsu, Yi Hu, Chunjing Jia, Brian Moritz, Donghui Lu, Jun-Sik Lee, Jin-Feng Jia, Thomas P. Devereaux, Sung-Kwan Mo, Zhi-Xun Shen

Abstract: The field of two-dimensional (2D) ferromagnetism has been proliferating over the past few years, with ongoing interests in basic science and potential applications in spintronic technology. However, a high-resolution spectroscopic study of the 2D ferromagnet is still lacking due to the small size and air sensitivity of the exfoliated nanoflakes. Here, we report a thickness-dependent ferromagnetism… ▽ More The field of two-dimensional (2D) ferromagnetism has been proliferating over the past few years, with ongoing interests in basic science and potential applications in spintronic technology. However, a high-resolution spectroscopic study of the 2D ferromagnet is still lacking due to the small size and air sensitivity of the exfoliated nanoflakes. Here, we report a thickness-dependent ferromagnetism in epitaxially grown Cr2Te3 thin films and investigate the evolution of the underlying electronic structure by synergistic angle-resolved photoemission spectroscopy, scanning tunneling microscopy, x-ray absorption spectroscopy, and first-principle calculations. A conspicuous ferromagnetic transition from Stoner to Heisenberg-type is directly observed in the atomically thin limit, indicating that dimensionality is a powerful tuning knob to manipulate the novel properties of 2D magnetism. Monolayer Cr2Te3 retains robust ferromagnetism, but with a suppressed Curie temperature, due to the drastic drop in the density of states near the Fermi level. Our results establish atomically thin Cr2Te3 as an excellent platform to explore the dual nature of localized and itinerant ferromagnetism in 2D magnets. △ Less

Submitted 26 September, 2023; originally announced September 2023.

Comments: 32 pages, 4 + 10 figures

Journal ref: Nature Communications 14, 5340 (2023)

Glass transition temperature of thin polymer films

Authors: Hsiao-Ping Hsu, Kurt Kremer

Abstract: The glass transition temperature and its connection to statistical properties of confined and free-standing polymer films of varying thickness containing unentangled to highly entangled bead-spring chains are studied by molecular dynamics simulations. For confined films, perfect scaling of the thickness-dependent end-to-end distance and radius of gyrations normalized to their bulk values in the di… ▽ More The glass transition temperature and its connection to statistical properties of confined and free-standing polymer films of varying thickness containing unentangled to highly entangled bead-spring chains are studied by molecular dynamics simulations. For confined films, perfect scaling of the thickness-dependent end-to-end distance and radius of gyrations normalized to their bulk values in the directions parallel and perpendicular to the surfaces is obtained. Particularly, the reduced end-to-end distance in the perpendicular direction is very well described by the extended Silberberg model. For bulk polymer melts, the relation between chain length and $T_g$ follows the Fox-Flory equation while $T_g$ for a given film thickness is almost independent of chain length. For films, $T_g$ decreases and is well described by Keddie's formula, where the reduction is more pronounced for free-standing films. For the present model, $T_g$ begins to deviate from bulk $T_g$ at the characteristic film thickness, where the average bond orientation becomes anisotropic and the entanglement density decreases. △ Less

Submitted 2 June, 2023; originally announced June 2023.

Comments: 6 pages, 4 figures, Supplementary Material (6 pages, 2 figures)

Journal ref: J. Chem. Phys. 159. 071104 (2023)

Nonlinear photoconductivities and quantum geometry of chiral multifold fermions

Authors: Hsiu-Chuan Hsu, Jhih-Shih You, Junyeong Ahn, Guang-Yu Guo

Abstract: Chiral multifold fermions are quasi-particles that appear only in chiral crystals such as transition metal silicides in the cubic B20 structure (i.e., the CoSi family), and they may show exotic physical properties. Here we study the injection and shift photoconductivities and also the related geometrical quantities for several types of chiral multifold fermions, including spin-1/2 as well as pseud… ▽ More Chiral multifold fermions are quasi-particles that appear only in chiral crystals such as transition metal silicides in the cubic B20 structure (i.e., the CoSi family), and they may show exotic physical properties. Here we study the injection and shift photoconductivities and also the related geometrical quantities for several types of chiral multifold fermions, including spin-1/2 as well as pseudospin-1 and -3/2 fermions, dubbed as Kramers Weyl, triple point and Rarita-Schwinger-Weyl (RSW) fermions, respectively. We utilize the minimal symmorphic model to describe the triple point fermions (TPF). We also consider the more realistic model Hamiltonian for the CoSi family including both linear and quadratic terms. We find that circular injection currents are quantized as a result of the Chern numbers carried by the multifold fermions within the linear models. Surprisingly, we discover that in the TPF model, linear shift conductivities are proportional to the pseudo spin-orbit coupling and independent of photon frequency. In contrast, for the RSW and Kramer Weyl fermions, the linear shift conductivity is linearly proportional to photon frequency. The numerical results agree with the power-counting analysis for quadratic Hamiltonians. The frequency independence of the linear shift conductivity could be attributed to the strong resonant symplectic Christoffel symbols of the flat bands. Moreover, the calculated symplectic Christoffel symbols show significant peaks at the nodes, suggesting that the shift currents are due to the strong geometrical response near the topological nodes. △ Less

Submitted 25 April, 2023; v1 submitted 5 January, 2023; originally announced January 2023.

Initial experimental results on a superconducting-qubit reset based on photon-assisted quasiparticle tunneling

Authors: V. A. Sevriuk, W. Liu, J. Rönkkö, H. Hsu, F. Marxer, T. F. Mörstedt, M. Partanen, J. Räbinä, M. Venkatesh, J. Hotari, L. Grönberg, J. Heinsoo, T. Li, J. Tuorila, K. W. Chan, J. Hassel, K. Y. Tan, M. Möttönen

Abstract: We present here our recent results on qubit reset scheme based on a quantum-circuit refrigerator (QCR). In particular, we use the photon-assisted quasiparticle tunneling through a superconductor--insulator--normal-metal--insulator--superconductor junction to controllably decrease the energy relaxation time of the qubit during the QCR operation. In our experiment, we use a transmon qubit with dispe… ▽ More We present here our recent results on qubit reset scheme based on a quantum-circuit refrigerator (QCR). In particular, we use the photon-assisted quasiparticle tunneling through a superconductor--insulator--normal-metal--insulator--superconductor junction to controllably decrease the energy relaxation time of the qubit during the QCR operation. In our experiment, we use a transmon qubit with dispersive readout. The QCR is capacitively coupled to the qubit through its normal-metal island. We employ rapid, square-shaped QCR control voltage pulses with durations in the range of 2--350 ns and a variety of amplitudes to optimize the reset time and fidelity. Consequently, we reach a qubit ground-state probability of roughly 97% with 80-ns pulses starting from the first excited state. The qubit state probability is extracted from averaged readout signal, where the calibration is based of the Rabi oscillations, thus not distinguishing the residual thermal population of the qubit. △ Less

Submitted 2 December, 2022; originally announced December 2022.

Journal ref: Appl. Phys. Lett. 121, 234002 (2022)

Data-driven identification and analysis of the glass transition in polymer melts

Authors: Atreyee Banerjee, Hsiao-Ping Hsu, Kurt Kremer, Oleksandra Kukharenko

Abstract: Understanding the nature of glass transition, as well as precise estimation of the glass transition temperature for polymeric materials, remain open questions in both experimental and theoretical polymer sciences. We propose a data-driven approach, which utilizes the high-resolution details accessible through the molecular dynamics simulation and considers the structural information of individual… ▽ More Understanding the nature of glass transition, as well as precise estimation of the glass transition temperature for polymeric materials, remain open questions in both experimental and theoretical polymer sciences. We propose a data-driven approach, which utilizes the high-resolution details accessible through the molecular dynamics simulation and considers the structural information of individual chains. It clearly identifies the glass transition temperature of polymer melts of weakly semiflexible chains. By combining principal component analysis and clustering, we identify the glass transition temperature in the asymptotic limit even from relatively short-time trajectories, which just reach into the Rouse-like monomer displacement regime. We demonstrate that fluctuations captured by the principal component analysis reflect the change in a chain's behaviour: from conformational rearrangement above to small rearrangements below the glass transition temperature. Our approach is straightforward to apply, and should be applicable to other polymeric glass-forming liquids. △ Less

Submitted 1 August, 2023; v1 submitted 25 November, 2022; originally announced November 2022.

Journal ref: ACS Macro Letters 2023 12 (6), 679-684

Orbital-ordered ferromagnetic insulating state in tensile-strained SrCoO$_{3}$ thin films

Authors: Sheng-Chieh Huang, Kanchan Sarkar, Renata M. Wentzcovitch, Han Hsu

Abstract: At ambient pressure, bulk SrCoO$_{3}$ is a ferromagnetic (FM) metal in cubic perovskite structure. By contrast, magnetic properties of epitaxial SrCoO$_{3}$ thin films, especially at high tensile strain ($\varepsilon \gtrsim 3$\%), remain unclear: Previous calculations had predicted antiferromagnetic (AFM) states more energetically favorable in this regime, but recent experiments indicated a FM in… ▽ More At ambient pressure, bulk SrCoO$_{3}$ is a ferromagnetic (FM) metal in cubic perovskite structure. By contrast, magnetic properties of epitaxial SrCoO$_{3}$ thin films, especially at high tensile strain ($\varepsilon \gtrsim 3$\%), remain unclear: Previous calculations had predicted antiferromagnetic (AFM) states more energetically favorable in this regime, but recent experiments indicated a FM insulating state. In this work, using first-principles calculations, we perform an extensive search for the structural, spin, magnetic, and orbital states of SrCoO$_{3}$ thin films. Our calculations indicate that at $0 < \varepsilon \lesssim 2.5$\%, SrCoO$_{3}$ favors a FM half-metallic state with intermediate-spin ($t_{2g}^{5}e_{g}^{1}$-like) Co exhibiting $d^{6}\underline L$ character. At $\varepsilon \gtrsim 2.5$\%, a FM insulating state with high-spin ($t_{2g}^{4}e_{g}^{2}$-like) Co dominates. This FM insulating state is achieved via complicated orbital ordering, cooperative Jahn--Teller distortion, and octahedral tilting about all three crystal axes. △ Less

Submitted 18 November, 2022; originally announced November 2022.

Comments: 15 pages, 4 figures

AI powered, automated discovery of polymer membranes for carbon capture

Authors: Ronaldo Giro, Hsianghan Hsu, Akihiro Kishimoto, Toshiyuki Hama, Rodrigo F. Neumann, Binquan Luan, Seiji Takeda, Lisa Hamada, Mathias B. Steiner

Abstract: The generation of molecules with Artificial Intelligence (AI) is poised to revolutionize materials discovery. Potential applications range from development of potent drugs to efficient carbon capture and separation technologies. However, existing computational frameworks lack automated training data creation and physical performance validation at meso-scale where complex properties of amorphous ma… ▽ More The generation of molecules with Artificial Intelligence (AI) is poised to revolutionize materials discovery. Potential applications range from development of potent drugs to efficient carbon capture and separation technologies. However, existing computational frameworks lack automated training data creation and physical performance validation at meso-scale where complex properties of amorphous materials emerge. The methodological gaps have so far limited AI design to small-molecule applications. Here, we report the first automated discovery of complex materials through inverse molecular design which is informed by meso-scale target features and process figures-of-merit. We have entered the new discovery regime by computationally generating and validating hundreds of polymer candidates designed for application in post-combustion carbon dioxide filtration. Specifically, we have validated each discovery step, from training dataset creation, via graph-based generative design of optimized monomer units, to molecular dynamics simulation of gas permeation through the polymer membranes. For the latter, we have devised a Representative Elementary Volume (REV) enabling permeability simulations at about 1,000x the volume of an individual, AI-generated monomer, obtaining quantitative agreement. The discovery-to-validation time per polymer candidate is on the order of 100 hours in a standard computing environment, offering a computational screening alternative prior to lab validation. △ Less

Submitted 28 July, 2022; v1 submitted 29 June, 2022; originally announced June 2022.

Comments: 29 pages, 12 figures and 1 table

Disorder effects on triple-point fermions

Authors: Hsiu-Chuan Hsu, Ion Cosma Fulga, Jhih-Shih You

Abstract: The stability of three-dimensional relativistic semimetals to disorder has recently attracted great attention, but the effect of disorder remains elusive for multifold fermions, that are not present in the framework of quantum field theory. In this paper, we investigate one type of multifold fermions, so-called triple-point fermions (TPFs), which have pseudospin-1 degrees of freedom and topologica… ▽ More The stability of three-dimensional relativistic semimetals to disorder has recently attracted great attention, but the effect of disorder remains elusive for multifold fermions, that are not present in the framework of quantum field theory. In this paper, we investigate one type of multifold fermions, so-called triple-point fermions (TPFs), which have pseudospin-1 degrees of freedom and topological charges $\pm2$. Specifically, we consider the effect of disorder on a minimal, three-band tight-binding model, which realizes the minimal number of two TPFs. The numerically-obtained, disorder-averaged density of states suggests that, within a finite energy window, the TPFs are robust up to a critical strength of disorder. In the strong disorder regime, the inter-TPF scattering is the main mechanism for destroying a single TPF. Moreover, we study the effects of disorder on the distribution of Fermi arcs and surface Berry curvature. We demonstrate that the Fermi arc retains its sharpness at weak disorder, but gradually dissolves into the metallic bulk for stronger disorder. In clean limit, the surface Berry curvature exhibits a bipolar configuration in the surface Brillouin zone. With increasing disorder, the positive and negative surface Berry curvature start to merge at the nearby momenta where the Fermi arcs penetrate into bulk. △ Less

Submitted 18 December, 2022; v1 submitted 24 May, 2022; originally announced May 2022.

Comments: 5+3 pages, 8 figures

Journal ref: Phys. Rev. B 106, 245118 (2022)

Widely Tunable Berry curvature in the Magnetic Semimetal Cr1+dTe2

Authors: Y. Fujisawa, M. Pardo-Almanza, C. H. Hsu, A. Mohamed, K. Yamagami, A. Krishnadas, F. C. Chuang, K. H. Khoo, J. Zang, A. Soumyanarayanan, Y. Okada

Abstract: Magnetic semimetals have increasingly emerged as lucrative platforms hosting spin-based topological phenomena in real and momentum spaces. Of particular interest is the emergence of Berry curvature, whose geometric origin, accessibility from Hall transport experiments, and material tunability, bodes well for new physics and practical devices. Cr1+dTe2, a self-intercalated magnetic transition metal… ▽ More Magnetic semimetals have increasingly emerged as lucrative platforms hosting spin-based topological phenomena in real and momentum spaces. Of particular interest is the emergence of Berry curvature, whose geometric origin, accessibility from Hall transport experiments, and material tunability, bodes well for new physics and practical devices. Cr1+dTe2, a self-intercalated magnetic transition metal dichalcogenide, TMD, exhibits attractive natural attributes relevant to such applications, including topological magnetism, tunable electron filling, magnetic frustration etc. While recent studies have explored real-space Berry curvature effects in this material, similar considerations of momentum-space Berry curvature are lacking. Here, we systematically investigate the electronic structure and transport properties of epitaxial Cr1+dTe2 thin films over a wide range of doping, d between 0.33 and 0.71. Spectroscopic experiments reveal the presence of a characteristic semi-metallic band region near the Brillouin Zone edge, which shows a rigid band like energy shift as a function of d. Transport experiments show that the intrinsic component of the anomalous Hall effect, AHE, is sizable, and undergoes a sign flip across d. Finally, density functional theory calculations establish a causal link between the observed doping evolution of the band structure and AHE: the AHE sign flip is shown to emerge from the sign change of the Berry curvature, as the semi-metallic band region crosses the Fermi energy. Our findings underscore the increasing relevance of momentum-space Berry curvature in magnetic TMDs and provide a unique platform for intertwining topological physics in real and momentum spaces. △ Less

Submitted 4 July, 2022; v1 submitted 5 April, 2022; originally announced April 2022.

Single-crystal epitaxial europium iron garnet films with strain-induced perpendicular magnetic anisotropy: structural, strain, magnetic, and spin transport properties

Authors: M. X. Guo, C. K. Cheng, Y. C. Liu, C. N. Wu, W. N. Chen, T. Y Chen, C. T. Wu, C. H. Hsu, S. Q. Zhou, C. F. Chang, L. H. Tjeng, S. F. Lee, C. F. Pai, M. Hong, J. Kwo

Abstract: Single-crystal europium iron garnet (EuIG) thin films epitaxially strain-grown on gadolinium gallium garnet (GGG)(100) substrates using off-axis sputtering have strain-induced perpendicular magnetic anisotropy (PMA). By varying the sputtering conditions, we have tuned the europium/iron (Eu/Fe) composition ratios in the films to tailor the film strains. The films exhibited an extremely smooth, part… ▽ More Single-crystal europium iron garnet (EuIG) thin films epitaxially strain-grown on gadolinium gallium garnet (GGG)(100) substrates using off-axis sputtering have strain-induced perpendicular magnetic anisotropy (PMA). By varying the sputtering conditions, we have tuned the europium/iron (Eu/Fe) composition ratios in the films to tailor the film strains. The films exhibited an extremely smooth, particle-free surface with roughness as low as 0.1 nm as observed using atomic force microscopy. High-resolution x-ray diffraction analysis and reciprocal space maps showed in-plane epitaxial film growth, very smooth film/substrate interface, excellent film crystallinity with a small full width at half maximum of 0.012$^{\circ}$ in the rocking curve scans, and an in-plane compressive strain without relaxation. In addition, spherical aberration-corrected scanning transmission electron microscopy showed an atomically abrupt interface between the EuIG film and GGG. The measured squarish out-of-plane magnetization-field hysteresis loops by vibrating sample magnetometry in conjunction with the measurements from angle-dependent x-ray magnetic dichroism demonstrated the PMA in the films. We have tailored the magnetic properties of the EuIG thin films, including saturation magnetization ranging from 71.91 to 124.51 emu/c.c. (increase with the (Eu/Fe) ratios), coercive field from 27 to 157.64 Oe, and the strength of PMA field ($H_\bot$) increasing from 4.21 to 18.87 kOe with the in-plane compressive strain from -0.774 to -1.044%. We have also investigated spin transport in Pt/EuIG bi-layer structure and evaluated the real part of spin mixing conductance to be $3.48\times10^{14} Ω^{-1}m^{-2}$. We demonstrated the current-induced magnetization switching with a low critical switching current density of $3.5\times10^6 A/cm^2$, showing excellent potential for low-dissipation spintronic devices. △ Less

Submitted 11 January, 2022; originally announced January 2022.

Comments: 29 pages, 9 figures, 1 table

On the nature of valence charge and spin excitations via multi-orbital Hubbard models for infinite-layer nickelates

Authors: Emily M. Been, Kuan H. Hsu, Yi Hu, Brian Moritz, Yi Cui, Chunjing Jia, Thomas P. Devereaux

Abstract: Building upon the recent progress on the intriguing underlying physics for the newly discovered infinite-layer nickelates, in this article we review an examination of valence charge and spin excitations via multi-orbital Hubbard models as way to determine the fundamental building blocks for Hamiltonians that can describe the low energy properties of infinite-layer nickelates. We summarize key resu… ▽ More Building upon the recent progress on the intriguing underlying physics for the newly discovered infinite-layer nickelates, in this article we review an examination of valence charge and spin excitations via multi-orbital Hubbard models as way to determine the fundamental building blocks for Hamiltonians that can describe the low energy properties of infinite-layer nickelates. We summarize key results from density-functional approaches, and apply them to the study of x-ray absorption to determine the valence ground states of infinite-layer nickelates in their parent form, and show that a fundamental $d^9$ configuration as in the cuprates is incompatible with a self-doped ground state having holes in both $d_{x^2-y^2}$ and a rare-earth-derived axial orbital. When doped, we determine that the rare-earth-derived orbitals empty and additional holes form low spin $(S=0)$ $d^8$ Ni states, which can be well-described as a doped single-band Hubbard model. Using exact diagonalization for a 2-orbital model involving Ni and rare earth orbitals, we find clear magnons at 1/2 filling that persist when doped, albeit with larger damping, and with a dependence on the precise orbital energy separation between the Ni- and rare-earth-derived orbitals. Taken together, a full two-band model for infinite-layer nickelates can well describe the valence charge and spin excitations observed experimentally. △ Less

Submitted 20 December, 2021; originally announced December 2021.

Journal ref: Frontiers in Physics, 10, 836959, 2022

Digital quantum simulation of dynamical topological invariants on near-term quantum computers

Authors: Huai-Chun Chang, Hsiu-Chuan Hsu

Abstract: Programmable quantum processors are suitable platforms for simulating quantum systems, of which topological phases are of particular interest. We simulate the quench dynamics of a one-dimensional system on IBM Q devices. The topological properties of the dynamics are described by the dynamical topological invariants, the dynamical winding number and the time-dependent Berry phase, which are simula… ▽ More Programmable quantum processors are suitable platforms for simulating quantum systems, of which topological phases are of particular interest. We simulate the quench dynamics of a one-dimensional system on IBM Q devices. The topological properties of the dynamics are described by the dynamical topological invariants, the dynamical winding number and the time-dependent Berry phase, which are simulated with the quantum circuit model. The results show that despite the noise present in the current quantum computers, the dynamical topological invariants are robust. Moreover, to investigate the influence of open quantum system, we analytically solve the master equation in Lindblad form and show that the dynamical winding number and the change in Berry phase are not affected by the dissipation. This study sheds light on the robustness of topological phases on the noisy intermediate-scale quantum computers. △ Less

Submitted 30 December, 2021; v1 submitted 25 July, 2021; originally announced July 2021.

Charge dynamics in quantum-circuit refrigeration: thermalization and microwave gain

Authors: Hao Hsu, Matti Silveri, Vasilii Sevriuk, Mikko Möttönen, Gianluigi Catelani

Abstract: Previous studies of photon-assisted tunneling through normal-metal-insulator-superconductor junctions have exhibited potential for providing a convenient tool to control the dissipation of quantum-electric circuits in-situ. However, the current literature on such a quantum-circuit refrigerator (QCR) does not present a detailed description for the charge dynamics of the tunneling processes or the p… ▽ More Previous studies of photon-assisted tunneling through normal-metal-insulator-superconductor junctions have exhibited potential for providing a convenient tool to control the dissipation of quantum-electric circuits in-situ. However, the current literature on such a quantum-circuit refrigerator (QCR) does not present a detailed description for the charge dynamics of the tunneling processes or the phase coherence of the open quantum system. Here we derive a master equation describing both quantum-electric and charge degrees of freedom, and discover that typical experimental parameters of low temperature and yet lower charging energy yield a separation of time scales for the charge and quantum dynamics. Consequently, the minor effect of the different charge states can be taken into account by averaging over the charge distribution. We also consider applying an ac voltage to the tunnel junction, which enables control of the decay rate of a superconducting qubit over four orders of magnitude by changing the drive amplitude; we find an order-of-magnitude drop in the qubit excitation in 40 ns and a residual reset infidelity below $10^{-4}$. Furthermore, for the normal island we consider the case of charging energy and single-particle level spacing large compared to the superconducting gap, i.e., a quantum dot. Although the decay rates arising from such a dot QCR appear low for use in qubit reset, the device can provide effective negative damping (gain) to the coupled microwave resonator. The Fano factor of such a millikelvin microwave source may be smaller than unity, with the latter value being reached close to the maximum attainable power. △ Less

Submitted 9 July, 2021; originally announced July 2021.

Comments: 20 pages, 10 figures

Journal ref: AVS Quantum Sci. 3, 042001 (2021)

Disorder-induced topology in quench dynamics

Authors: Hsiu-Chuan Hsu, Pok-Man Chiu, Po-Yao Chang

Abstract: We study the effect of strong disorder on topology and entanglement in quench dynamics. Although disorder-induced topological phases have been well studied in equilibrium, the disorder-induced topology in quench dynamics has not been explored. In this work, we predict a disorder-induced topology of post-quench states characterized by the quantized dynamical Chern number and the crossings in the en… ▽ More We study the effect of strong disorder on topology and entanglement in quench dynamics. Although disorder-induced topological phases have been well studied in equilibrium, the disorder-induced topology in quench dynamics has not been explored. In this work, we predict a disorder-induced topology of post-quench states characterized by the quantized dynamical Chern number and the crossings in the entanglement spectrum in $(1+1)$ dimensions. The dynamical Chern number undergoes transitions from zero to unity, and back to zero when increasing the disorder strength. The boundaries between different dynamical Chern numbers are determined by delocalized critical points in the post-quench Hamiltonian with the strong disorder. An experimental realization in quantum walks is discussed. △ Less

Submitted 13 September, 2021; v1 submitted 19 January, 2021; originally announced January 2021.

Comments: 10 pages, 8 figures

Journal ref: Phys. Rev. Research 3, 033242 (2021)

Itinerant ferromagnetism mediated by giant spin polarization of metallic ligand band in van der Waals magnet Fe5GeTe2

Authors: K. Yamagami, Y. Fujisawa, B. Driesen, C. H. Hsu, K. Kawaguchi, H. Tanaka, T. Kondo, Y. Zhang, H. Wadati, K. Araki, T. Takeda, Y. Takeda, T. Muro, F. C. Chuang, Y. Niimi, K. Kuroda, M. Kobayashi, Y. Okada

Abstract: We investigate near-Fermi-energy (EF) element-specific electronic and spin states of ferromagnetic van der Waals (vdW) metal Fe5GeTe2. The soft x-ray angle-resolved photoemission spectroscopy (SX-ARPES) measurement provides spectroscopic evidence of localized Fe 3d band. We also find prominent hybridization between the localized Fe 3d band and the delocalized Ge/Te p bands. This picture is strongl… ▽ More We investigate near-Fermi-energy (EF) element-specific electronic and spin states of ferromagnetic van der Waals (vdW) metal Fe5GeTe2. The soft x-ray angle-resolved photoemission spectroscopy (SX-ARPES) measurement provides spectroscopic evidence of localized Fe 3d band. We also find prominent hybridization between the localized Fe 3d band and the delocalized Ge/Te p bands. This picture is strongly supported from direct observation of the remarkable spin polarization of the ligand p bands near EF, using x-ray magnetic circular dichroism (XMCD) measurements. The strength of XMCD signal from ligand element Te shows the highest value, as far as we recognize, among literature reporting finite XMCD signal for none-magnetic element in any systems. Combining SX-ARPES and elemental selective XMCD measurements, we collectively point an important role of giant spin polarization of the delocalized ligand Te states for realizing itinerant long-range ferromagnetism in Fe5GeTe2. Our finding provides a fundamental elemental selective view-point for understanding mechanism of itinerant ferromagnetism in low dimensional compounds, which also leads insight for designing exotic magnetic states by interfacial band engineering in heterostructures. △ Less

Submitted 4 January, 2021; originally announced January 2021.

Journal ref: Phys. Rev. B 103, 060403 (2021)

The semiclassical theory for spin dynamics in a disordered system

Authors: Tsung-Wei Chen, Hsiu-Chuan Hsu

Abstract: We investigate the Drude model of spin dynamics in two-dimensional spin-orbit coupled systems. In the absence of an applied electric field, the spin aligns with the k-dependent effective magnetic field. The influence of disorder (the momentum relaxation time $τ$) on the system is considered. In the presence of an electric field, the change in momentum causes a change in the effective magnetic fiel… ▽ More We investigate the Drude model of spin dynamics in two-dimensional spin-orbit coupled systems. In the absence of an applied electric field, the spin aligns with the k-dependent effective magnetic field. The influence of disorder (the momentum relaxation time $τ$) on the system is considered. In the presence of an electric field, the change in momentum causes a change in the effective magnetic field. The in-plane spin can precess around the successive change in the orientation of the effective magnetic field. We find that up to the linear order of the electric field, the spin orientation undergoes Larmor-like and non-Larmor like precession. Furthermore, we find that the non-Larmor motion over a very short time ($t\llτ$) exactly equals the result obtained from the Kubo formula. This means that the Kubo formula only captures the system's response over a very short evolution. The spin-Hall conductivity for Larmor and non-Larmor precession in the Rashba system is analytically calculated. We find that the intrinsic spin-Hall current is not a universal constant and correctly drops to zero when the Rashba spin-orbit coupling drops to zero. We also calculate the time-averaged Larmor and non-Larmor spin-Hall conductivities (SHCs) for the k-cubic Rashba system and compare them to experimental values. The time-averaged Larmor SHC vanishes and the non-Larmor SHC is given by $2.1(q/8π)$ which is very close to the experimental value $2.2(q/8π)$ by Wunderlich et al. [Phys. Rev. Lett. {\bf 94}, 047204 (2005)]. △ Less

Submitted 10 December, 2020; originally announced December 2020.

Structural transition and re-emergence of iron's total electron spin in (Mg,Fe)O at ultrahigh pressure

Authors: Han Hsu, Koichiro Umemoto

Abstract: Fe-bearing MgO [(Mg$_{1-x}$Fe$_x$)O] is considered a major constituent of terrestrial exoplanets. Crystallizing in the B1 structure in the Earth's lower mantle, (Mg$_{1-x}$Fe$_x$)O undergoes a high-spin ($S=2$) to low-spin ($S=0$) transition at $\sim$45 GPa, accompanied by anomalous changes of this mineral's physical properties, while the intermediate-spin ($S=1$) state has not been observed. In t… ▽ More Fe-bearing MgO [(Mg$_{1-x}$Fe$_x$)O] is considered a major constituent of terrestrial exoplanets. Crystallizing in the B1 structure in the Earth's lower mantle, (Mg$_{1-x}$Fe$_x$)O undergoes a high-spin ($S=2$) to low-spin ($S=0$) transition at $\sim$45 GPa, accompanied by anomalous changes of this mineral's physical properties, while the intermediate-spin ($S=1$) state has not been observed. In this work, we investigate (Mg$_{1-x}$Fe$_x$)O ($x \leq 0.25$) up to $1.8$ TPa via first-principles calculations. Our calculations indicate that (Mg$_{1-x}$Fe$_x$)O undergoes a simultaneous structural and spin transition at $\sim$0.6 TPa, from the B1 phase low-spin state to the B2 phase intermediate-spin state, with Fe's total electron spin $S$ re-emerging from $0$ to $1$ at ultrahigh pressure. Upon further compression, an intermediate-to-low spin transition occurs in the B2 phase. Depending on the Fe concentration ($x$), metal$-$insulator transition and rhombohedral distortions can also occur in the B2 phase. These results suggest that Fe and spin transition may affect planetary interiors over a vast pressure range. △ Less

Submitted 3 May, 2022; v1 submitted 16 November, 2020; originally announced November 2020.

Comments: Main text: 10 pages and 7 figures. Supplementary Information: 8 pages and 5 figures

Journal ref: Nat. Commun. 13, 2780 (2022)

Coulombically-stabilized oxygen hole polarons enable fully reversible oxygen redox

Authors: Iwnetim I. Abate, C. Das Pemmaraju, Se Young Kim, Kuan H. Hsu, Sami Sainio, Brian Moritz, John Vinson, Michael F. Toney, Wanli Yang, William E. Gent, Thomas P. Devereaux, Linda F. Nazar, William C. Chueh

Abstract: Stabilizing high-valent redox couples and exotic electronic states necessitate an understanding of the stabilization mechanism. In oxides, whether they are being considered for energy storage or computing, highly oxidized oxide-anion species rehybridize to form short covalent bonds and are related to significant local structural distortions. In intercalation oxide electrodes for batteries, while s… ▽ More Stabilizing high-valent redox couples and exotic electronic states necessitate an understanding of the stabilization mechanism. In oxides, whether they are being considered for energy storage or computing, highly oxidized oxide-anion species rehybridize to form short covalent bonds and are related to significant local structural distortions. In intercalation oxide electrodes for batteries, while such reorganization partially stabilizes oxygen redox, it also gives rise to substantial hysteresis. In this work, we investigate oxygen redox in layered Na2-XMn3O7, a positive electrode material with ordered Mn vacancies. We show that coulombic interactions between oxidized oxide-anions and the interlayer Na vacancies can disfavor rehybridization and stabilize hole polarons on oxygen at 4.2 V vs. Na/Na+. These coulombic interactions provide thermodynamic energy saving as large as O-O covalent bonding and enable ~ 40 mV voltage hysteresis over multiple electrochemical cycles with negligible voltage fade. Our results establish a complete picture of redox energetics by highlighting the role of coulombic interactions across several atomic distances and suggest avenues to stabilize highly oxidized oxygen for applications in energy storage and beyond. △ Less

Submitted 25 October, 2020; originally announced October 2020.

Comments: 19 pages, 4 Figures, Research Article

Anomalous thermal properties and spin crossover of ferromagnesite (Mg,Fe)CO3

Authors: Han Hsu, Christian P. Crisostomo, Wenzhong Wang, Zhongqing Wu

Abstract: Ferromagnesite (Mg,Fe)CO3, also referred to as magnesiosiderite at high iron concentration, is a solid solution of magnesite (MgCO3) and siderite (FeCO3). Ferromagnesite is believed to enter the Earth's lower mantle via subduction and is considered a major carbon carrier in the Earth's lower mantle, playing a key role in the Earth's deep carbon cycle. Experiments have shown that ferromagnesite und… ▽ More Ferromagnesite (Mg,Fe)CO3, also referred to as magnesiosiderite at high iron concentration, is a solid solution of magnesite (MgCO3) and siderite (FeCO3). Ferromagnesite is believed to enter the Earth's lower mantle via subduction and is considered a major carbon carrier in the Earth's lower mantle, playing a key role in the Earth's deep carbon cycle. Experiments have shown that ferromagnesite undergoes a pressure-induced spin crossover, accompanied by volume and elastic anomalies, in the lower-mantle pressure range. In this work, we investigate thermal properties of (Mg,Fe)CO3 using first-principles calculations. We show that nearly all thermal properties of ferromagnesite are drastically altered by iron spin crossover, including anomalous reduction of volume, anomalous softening of bulk modulus, and anomalous increases of thermal expansion, heat capacity, and Guneisen parameter. Remarkably, the anomaly of heat capacity remains prominent (up to 40%) at high temperature without smearing out, which suggests that iron spin crossover may significantly affect the thermal properties of subducting slabs and the Earth's deep carbon cycle. △ Less

Submitted 24 December, 2020; v1 submitted 15 October, 2020; originally announced October 2020.

Comments: Main text: 24 pages and 8 figures; Supplemental Material: 8 pages, 3 tables, and 1 figure

Journal ref: Phys. Rev. B 103, 054401 (2021)

Efficient equilibration of confined and free-standing films of highly entangled polymer melts

Authors: Hsiao-Ping Hsu, Kurt Kremer

Abstract: Equilibration of polymer melts containing highly entangled long polymer chains in confinement or with free surfaces is a challenge for computer simulations. We approach this problem by first studying polymer melts based on the soft-sphere coarse-grained model confined between two walls with periodic boundary conditions in two directions parallel to the walls. Then we apply backmapping to reinsert… ▽ More Equilibration of polymer melts containing highly entangled long polymer chains in confinement or with free surfaces is a challenge for computer simulations. We approach this problem by first studying polymer melts based on the soft-sphere coarse-grained model confined between two walls with periodic boundary conditions in two directions parallel to the walls. Then we apply backmapping to reinsert the microscopic details of the underlying bead-spring model. Tuning the strength of the wall potential, the monomer density of confined polymer melts in equilibrium is kept at the bulk density even near the walls. In a weak confining regime, we observe the same conformational properties of chains as in the bulk melt showing that our confined polymer melts have reached their equilibrated state. Our methodology provides an efficient way of equilibrating large polymer films with different thicknesses and is not confined to a specific underlying microscopic model. Switching off the wall potential in the direction perpendicular to the walls, enables to study free-standing highly entangled polymer films or polymer films with one supporting substrate. △ Less

Submitted 18 September, 2020; originally announced September 2020.

Comments: 26 pages, 11 figures

Journal ref: J. Chem. Phys. 153, 144902 (2020)

Tailoring Magnetism in Self-intercalated Cr1+δTe2 Epitaxial Films

Authors: Y. Fujisawa, M. Pardo-Almanza, J. Garland, K. Yamagami, X. Zhu, X. Chen, K. Araki, T. Takeda, M. Kobayashi, Y. Takeda, C. H. Hsu, F. C. Chuang, R. Laskowski, K. H. Khoo, A. Soumyanarayanan, Y. Okada

Abstract: Magnetic transition metal dichalcogenide (TMD) films have recently emerged as promising candidates to host novel magnetic phases relevant to next-generation spintronic devices. However, systematic control of the magnetization orientation, or anisotropy, and its thermal stability, characterized by Curie temperature (Tc) remains to be achieved in such films. Here we present self-intercalated epitaxi… ▽ More Magnetic transition metal dichalcogenide (TMD) films have recently emerged as promising candidates to host novel magnetic phases relevant to next-generation spintronic devices. However, systematic control of the magnetization orientation, or anisotropy, and its thermal stability, characterized by Curie temperature (Tc) remains to be achieved in such films. Here we present self-intercalated epitaxial Cr1+δTe2 films as a platform for achieving systematic/smooth magnetic tailoring in TMD films. Using a molecular beam epitaxy (MBE) based technique, we have realized epitaxial Cr1+δTe2 films with smoothly tunable over a wide range (0.33-0.82), while maintaining NiAs-type crystal structure. With increasing δ, we found monotonic enhancement of Tc from 160 to 350 K, and the rotation of magnetic anisotropy from out-of-plane to in-plane easy axis configuration for fixed film thickness. Contributions from conventional dipolar and orbital moment terms are insufficient to explain the observed evolution of magnetic behavior with δ. Instead, ab initio calculations suggest that the emergence of antiferromagnetic interactions with δ, and its interplay with conventional ferromagnetism, may play a key role in the observed trends. To our knowledge, this constitutes the first demonstration of tunable Tc and magnetic anisotropy across room temperature in TMD films, and paves the way for engineering novel magnetic phases for spintronic applications. △ Less

Submitted 1 August, 2020; originally announced August 2020.

Journal ref: Phys. Rev. Materials 4, 114001 (2020)

Fermionic Order by Disorder in a van der Waals Antiferromagnet

Authors: R. Okuma, D. Ueta, S. Kuniyoshi, Y. Fujisawa, B. Smith, C. H. Hsu, Y. Inagaki, W. Si, T. Kawae, H. Lin, F. C. Chuang, T. Masuda, R. Kobayashi, Y. Okada

Abstract: CeTe3 is a unique platform to investigate the itinerant magnetism in a van der Waals (vdW) coupled metal. Despite chemical pressure being a promising route to boost quantum fluctuation in this system, a systematic study on the chemical pressure effect on Ce3+(4f1) states is absent. Here, we report on the successful growth of a series of Se doped single crystals of CeTe3. We found a fluctuation dri… ▽ More CeTe3 is a unique platform to investigate the itinerant magnetism in a van der Waals (vdW) coupled metal. Despite chemical pressure being a promising route to boost quantum fluctuation in this system, a systematic study on the chemical pressure effect on Ce3+(4f1) states is absent. Here, we report on the successful growth of a series of Se doped single crystals of CeTe3. We found a fluctuation driven exotic magnetic rotation from the usual easy-axis ordering to an unusual hard-axis ordering. Unlike in localized magnetic systems, near-critical magnetism can increase itinerancy hand-in-hand with enhancing fluctuation of magnetism. Thus, seemingly unstable hard-axis ordering emerges through kinetic energy gain, with the self-consistent observation of enhanced magnetic fluctuation (disorder). As far as we recognize, this order-by-disorder process in fermionic system is observed for the first time within vdW materials. Our finding opens a unique experimental platform for direct visualization of the rich quasiparticle Fermi surface deformation associated with the Fermionic order-by-disorder process. Also, the search for emergent exotic phases by further tuning of quantum fluctuation is suggested as a promising future challenge. △ Less

Submitted 29 July, 2020; originally announced July 2020.

Topological Anderson insulating phases in the long-range Su-Schrieffer-Heeger model

Authors: Hsu-Chuan Hsu, Tsung-Wei Chen

Abstract: In the long-range Su-Schriffer-Heeger (SSH) model, in which the next nearest-neighbor hopping is considered, there exhibits a rich topological phase diagram that contains winding numbers $w=0, 1$, and $2$. In the presence of disorder, the change in mean winding number with various disorder strengths is numerically calculated. We find that the disorder drives phase transitions:… ▽ More In the long-range Su-Schriffer-Heeger (SSH) model, in which the next nearest-neighbor hopping is considered, there exhibits a rich topological phase diagram that contains winding numbers $w=0, 1$, and $2$. In the presence of disorder, the change in mean winding number with various disorder strengths is numerically calculated. We find that the disorder drives phase transitions: $w=0 \rightarrow 1, 0 \rightarrow 2 $, $1 \rightarrow 2$ and $2 \rightarrow 1$, in which the non-zero winding numbers driven by disorder are called the topological Anderson insulating (TAI) phases. The transition mechanisms in this long-range SSH model are investigated by means of localization length and self-energy. We find that the localization length has a drastic change at the transition point, and the corresponding critical disorder strength is obtained by further using Born approximation to the self-energy. The origin for the $w = 0$ to $w = 1, 2$ transitions is attributed to the energy gap renormalization (first Born approximation), while for the transitions from $w=1$ to $w=2$ and vice versa are the strong scattering (self-consistent Born approximation). The result of self-consistent Born approximation suggests that in the thermodynamic limit, the gap closing point is not at the Fermi level for the system with localized edge states. This agrees with the topological protection of edge states, such that the pre-existent edge states are protected from being scattered into bulk. Given the experimental feasibility of the long-range SSH model, the predicted TAI phases and transitions could be observed in experiments. △ Less

Submitted 19 November, 2020; v1 submitted 21 April, 2020; originally announced April 2020.

Tunable refrigerator for non-linear quantum electric circuits

Authors: Hao Hsu, Matti Silveri, András Gunyhó, Jan Goetz, Gianluigi Catelani, Mikko Möttönen

Abstract: The emerging quantum technological applications call for fast and accurate initialization of the corresponding devices to low-entropy quantum states. To this end, we theoretically study a recently demonstrated quantum-circuit refrigerator in the case of non-linear quantum electric circuits such as superconducting qubits. The maximum refrigeration rate of transmon and flux qubits is observed to be… ▽ More The emerging quantum technological applications call for fast and accurate initialization of the corresponding devices to low-entropy quantum states. To this end, we theoretically study a recently demonstrated quantum-circuit refrigerator in the case of non-linear quantum electric circuits such as superconducting qubits. The maximum refrigeration rate of transmon and flux qubits is observed to be roughly an order of magnitude higher than that of usual linear resonators, increasing flexibility in the design. We find that for typical experimental parameters, the refrigerator is suitable for resetting different qubit types to fidelities above 99.99% in a few or a few tens of nanoseconds depending on the scenario. Thus the refrigerator appears to be a promising tool for quantum technology and for detailed studies of open quantum systems. △ Less

Submitted 16 June, 2020; v1 submitted 17 February, 2020; originally announced February 2020.

Comments: 21 pages, 12 figures

Journal ref: Phys. Rev. B 101, 235422 (2020)

Clustering of entanglement points in highly strained polymer melts

Authors: Hsiao-Ping Hsu, Kurt Kremer

Abstract: Polymer melts undergoing large deformation by uniaxial elongation are studied by molecular dynamics simulations of bead-spring chains in melts. Applying a primitive path analysis to strongly deformed polymer melts, the role of topological constrains in highly entangled polymer melts is investigated and quantified. We show that the over-all, large scale conformations of the primitive paths (PPs) of… ▽ More Polymer melts undergoing large deformation by uniaxial elongation are studied by molecular dynamics simulations of bead-spring chains in melts. Applying a primitive path analysis to strongly deformed polymer melts, the role of topological constrains in highly entangled polymer melts is investigated and quantified. We show that the over-all, large scale conformations of the primitive paths (PPs) of stretched chains follow affine deformation while the number and the distribution of entanglement points along the PPs do not. Right after deformation, PPs of chains retract in both directions parallel and perpendicular to the elongation. Upon further relaxation we observe a long-lived clustering of entanglement points. Together with the delayed relaxation time this leads to a metastable inhomogeneous distribution of topological constraints in the melts. △ Less

Submitted 31 May, 2019; originally announced June 2019.

Comments: 28 pages, 14 figures

A coarse-grained polymer model for studying the glass transition

Authors: Hsiao-Ping Hsu, Kurt Kremer

Abstract: To study the cooling behavior and the glass transition of polymer melts in bulk and with free surfaces a coarse-grained weakly semi-flexible polymer model is developed. Based on a standard bead spring model with purely repulsive interactions an attractive potential between non-bonded monomers is added, such that the pressure of polymer melts is tuned to zero. Additionally, the commonly used bond b… ▽ More To study the cooling behavior and the glass transition of polymer melts in bulk and with free surfaces a coarse-grained weakly semi-flexible polymer model is developed. Based on a standard bead spring model with purely repulsive interactions an attractive potential between non-bonded monomers is added, such that the pressure of polymer melts is tuned to zero. Additionally, the commonly used bond bending potential [Everaers et al., Science 303, 823 (2004)] controlling the chain stiffness is replaced by a new bond bending potential. For this model, we show that the Kuhn length and the internal distances along the chains in the melt only very weakly depend on temperature, just as for typical experimental systems. The glass transition is observed by the temperature dependency of the melt density and the characteristic non-Arrhenius slowing down of the chain mobility. The model is set to allow for a fast switch between models, for which a wealth of data already exists. △ Less

Submitted 6 September, 2019; v1 submitted 23 December, 2018; originally announced December 2018.

Comments: 6 pages, 5 figures; published version (including erratum)

Journal ref: J. Chem. Phys. 150, 091101 (2019)

Chain retraction in highly entangled stretched polymer melts

Authors: Hsiao-Ping Hsu, Kurt Kremer

Abstract: We use computer simulations to study the relaxation of strongly deformed highly entangled polymer melts in the non-linear viscoelastic regime, focusing on anisotropic chain conformations after isochoric elongation. The Doi-Edwards tube model and its GLaMM extension, incorporating contour length fluctuation and convective constraint release, predict a retraction of the polymer chain extension in al… ▽ More We use computer simulations to study the relaxation of strongly deformed highly entangled polymer melts in the non-linear viscoelastic regime, focusing on anisotropic chain conformations after isochoric elongation. The Doi-Edwards tube model and its GLaMM extension, incorporating contour length fluctuation and convective constraint release, predict a retraction of the polymer chain extension in all directions, setting in immediately after deformation. This prediction has been challenged by experiment, simulation, and other theoretical studies, questioning the general validity of the tube concept. For very long chains we observe the initial contraction of the chain extension parallel and perpendicular to the stretching direction. However, the effect is significantly weaker than predicted by the GLaMM model. We also show that the first anisotropic term of an expansion of the 2D scattering function qualitatively agrees to predictions of the GLaMM model, providing an option for direct experimental tests. △ Less

Submitted 20 November, 2018; v1 submitted 4 May, 2018; originally announced May 2018.

Comments: 6 pages, 3 figures, 7 references added

Journal ref: Phys. Rev. Lett. 121, 167801 (2018)

Topological phase transitions in an inverted InAs/GaSb quantum well driven by tilted magnetic fields

Authors: Hsiu-Chuan Hsu, Min-Jyun Jhang, Tsung-Wei Chen, Guang-Yu Guo

Abstract: The helical edge states in a quantum spin Hall insulator are presumably protected by time- reversal symmetry. However, even in the presence of magnetic field which breaks time-reversal symmetry, the helical edge conduction can still exist, dubbed as pseudo quantum spin Hall effect. In this work, the effects of the magnetic fields on the pseudo quantum spin Hall effect and the phase transitions are… ▽ More The helical edge states in a quantum spin Hall insulator are presumably protected by time- reversal symmetry. However, even in the presence of magnetic field which breaks time-reversal symmetry, the helical edge conduction can still exist, dubbed as pseudo quantum spin Hall effect. In this work, the effects of the magnetic fields on the pseudo quantum spin Hall effect and the phase transitions are studied. We show that an in-plane magnetic field drives a pseudo quantum spin Hall state to metallic state at a high field. Moreover, at a fixed in-plane magnetic field, an increasing out-of-plane magnetic field leads to a reentrance of pseudo quantum spin Hall state in an inverted InAs/GaSb quantum well. The edge state probability distribution and Chern numbers are calculated to verify that the reentrant states are topologically nontrivial. The origin of the reentrant behavior is attributed to the nonmonotonic bending of Landau levels and the Landau level mixing caused by the orbital effect induced by the in-plane magnetic field. The robustness to disorder is demonstrated by the numerically calculated quantized conductance for disordered nanowires within Landauer-Büttiker formalism. △ Less

Submitted 6 April, 2017; originally announced April 2017.

Journal ref: Phys. Rev. B 95, 195408 (2017)

Detailed analysis of Rouse mode and dynamic scattering function of highly entangled polymer melts in equilibrium

Authors: Hsiao-Ping Hsu, Kurt Kremer

Abstract: We present large-scale molecular dynamics simulations for a coarse-grained model of polymer melts in equilibrium. From detailed Rouse mode analysis we show that the time-dependent relaxation of the autocorrelation function (ACF) of modes $p$ can be well described by the effective stretched exponential function due to the crossover from Rouse to reptation regime. The ACF is independent of chain siz… ▽ More We present large-scale molecular dynamics simulations for a coarse-grained model of polymer melts in equilibrium. From detailed Rouse mode analysis we show that the time-dependent relaxation of the autocorrelation function (ACF) of modes $p$ can be well described by the effective stretched exponential function due to the crossover from Rouse to reptation regime. The ACF is independent of chain sizes $N$ for $N/p<N_e$ ($N_e$ is the entanglement length), and there exists a minimum of the stretching exponent as $N/p \rightarrow N_e$. As $N/p$ increases, we verify the crossover scaling behavior of the effective relaxation time $τ_{{\rm eff},p}$ from the Rouse regime to the reptation regime. We have also provided evidence that the incoherent dynamic scattering function follows the same crossover scaling behavior of the mean square displacement of monomers at the corresponding characteristic time scales. The decay of the coherent dynamic scattering function is slowed down and a plateau develops as chain sizes increase at the intermediate time and wave length scales. The tube diameter extracted from the coherent dynamic scattering function is equivalent to the previous estimate from the mean square displacement of monomers. △ Less

Submitted 10 January, 2017; originally announced January 2017.

Comments: 8 pages, 7 figures, to be published in EPJST special issue on "Phase transitions and critical phenomena" (2017)

Conductance fluctuations in disordered 2D topological insulator wires: From quantum spin-Hall to ordinary quantum phases

Authors: Hsiu-Chuan Hsu, Ioannis Kleftogiannis, Guang-Yu Guo, Victor A. Gopar

Abstract: Impurities and defects are ubiquitous in topological insulators (TIs) and thus understanding the effects of disorder on electronic transport is important. We calculate the distribution of the random conductance fluctuations $P(G)$ of disordered 2D TI wires modeled by the Bernevig-Hughes-Zhang (BHZ) Hamiltonian with realistic parameters. As we show, the disorder drives the TIs into different regime… ▽ More Impurities and defects are ubiquitous in topological insulators (TIs) and thus understanding the effects of disorder on electronic transport is important. We calculate the distribution of the random conductance fluctuations $P(G)$ of disordered 2D TI wires modeled by the Bernevig-Hughes-Zhang (BHZ) Hamiltonian with realistic parameters. As we show, the disorder drives the TIs into different regimes: metal (M), quantum spin-Hall insulator (QSHI), and ordinary insulator (OI). By varying the disorder strength and Fermi energy, we calculate analytically and numerically $P(G)$ across the entire phase diagram. The conductance fluctuations follow the statistics of the unitary universality class $β=2$. At strong disorder and high energy, however, the size of the fluctutations $δG$ reaches the universal value of the orthogonal symmetry class ($β=1$). At the QSHI-M and QSHI-OI crossovers, the interplay between edge and bulk states plays a key role in the statistical properties of the conductance. △ Less

Submitted 12 February, 2018; v1 submitted 1 December, 2016; originally announced December 2016.

Comments: 17 pages, 5 figures

Journal ref: J. Phys. Soc. Jpn. 87, 034701 (2018)

Optical signatures of low spin Fe3+: a new probe for the spin state of bridgmanite and post-perovskite

Authors: Sergey S. Lobanov, Han Hsu, Jung-Fu Lin, Takashi Yoshino, Alexander F. Goncharov

Abstract: Iron spin transition directly affects properties of lower mantle minerals and can thus alter geophysical and geochemical characteristics of the deep Earth. While the spin transition in ferropericlase has been vigorously established at P ~ 60 GPa and 300 K, experimental evidence for spin transitions in other rock-forming minerals, such as bridgmanite and post-perovskite, remains controversial. Mult… ▽ More Iron spin transition directly affects properties of lower mantle minerals and can thus alter geophysical and geochemical characteristics of the deep Earth. While the spin transition in ferropericlase has been vigorously established at P ~ 60 GPa and 300 K, experimental evidence for spin transitions in other rock-forming minerals, such as bridgmanite and post-perovskite, remains controversial. Multiple valence, spin, and coordination states of iron in bridgmanite and post-perovskite are difficult to resolve with conventional spin-probing techniques. Optical spectroscopy, on the other hand, is sensitive to high/low spin ferrous/ferric iron at different sites; thus, it can be a powerful probe for spin transitions. Here we establish the optical signature of low spin Fe3+O6, a plausible low spin unit in bridgmanite and post-perovskite, by optical absorption experiments in diamond anvil cells. We show that the optical absorption of Fe3+O6 in NAL (new aluminous phase) is very sensitive to the iron spin state and represents a model behavior of bridgmanite and post-perovskite in the deep lower mantle across a spin transition. Specifically, an absorption band centered at ~ 19000 cm-1 is characteristic of the 2T2g to 2T1g (2A2g) transition in low spin Fe3+ in NAL at 40 GPa. This new spectroscopic information constrains the crystal field splitting energy of low spin Fe3+ to ~ 22200 cm-1 which we also independently confirm by our first-principles calculations. Together with available information on the electronic structure of Fe3+O6-compounds, we constrain the spin-pairing energy of Fe3+ in an octahedral field to ~ 20000-23000 cm-1. This implies that octahedrally-coordinated Fe3+ in bridgmanite is low spin at P > ~ 40 GPa. △ Less

Submitted 4 October, 2016; originally announced October 2016.

Comments: 15 pages, 7 figures

Theoretical prediction of magnetic and noncentrosymmetric Weyl fermion semimetal states in the R-Al-X family of compounds (R=rare earth, Al=aluminium, X=Si, Ge)

Authors: Guoqing Chang, Bahadur Singh, Su-Yang Xu, Guang Bian, Shin-Ming Huang, Chuang-Han Hsu, Ilya Belopolski, Nasser Alidoust, Daniel S. Sanchez, Hao Zheng, Hong Lu, Xiao Zhang, Yi Bian, Tay-Rong Chang, Horng-Tay Jeng, Arun Bansil, Han Hsu, Shuang Jia, Titus Neupert, Hsin Lin, M. Zahid Hasan

Abstract: Weyl semimetals are novel topological conductors that host Weyl fermions as emergent quasiparticles. While the Weyl fermions in high-energy physics are strictly defined as the massless solution of the Dirac equation and uniquely fixed by Lorentz symmetry, there is no such constraint for a topological metal in general. Specifically, the Weyl quasiparticles can arise by breaking either the space-inv… ▽ More Weyl semimetals are novel topological conductors that host Weyl fermions as emergent quasiparticles. While the Weyl fermions in high-energy physics are strictly defined as the massless solution of the Dirac equation and uniquely fixed by Lorentz symmetry, there is no such constraint for a topological metal in general. Specifically, the Weyl quasiparticles can arise by breaking either the space-inversion ($\mathcal{I}$) or time-reversal ($\mathcal{T}$) symmetry. They can either respect Lorentz symmetry (type-I) or strongly violate it (type-II). To date, different types of Weyl fermions have been predicted to occur only in different classes of materials. In this paper, we present a significant materials breakthrough by identifying a large class of Weyl materials in the RAlX (R=Rare earth, Al, X=Ge, Si) family that can realize all different types of emergent Weyl fermions ($\mathcal{I}$-breaking, $\mathcal{T}$-breaking, type-I or type-II), depending on a suitable choice of the rare earth elements. Specifically, RAlX can be ferromagnetic, nonmagnetic or antiferromagnetic and the electronic band topology and topological nature of the Weyl fermions can be tuned. The unparalleled tunability and the large number of compounds make the RAlX family of compounds a unique Weyl semimetal class for exploring the wide-ranging topological phenomena associated with different types of emergent Weyl fermions in transport, spectroscopic and device-based experiments. △ Less

Submitted 11 January, 2018; v1 submitted 7 April, 2016; originally announced April 2016.

Comments: This paper reports theoretical prediction of Weyl semimetal (type-I and type-II) states in the R-Al-X family. For the experimental discovery, see our earlier paper at http://arxiv.org/abs/1603.07318

Journal ref: Phys. Rev. B 97, 041104 (2018)

Static and dynamic properties of large polymer melts in equilibrium

Authors: Hsiao-Ping Hsu, Kurt Kremer

Abstract: We present a detailed study of the static and dynamic behavior of long semiflexible polymer chains in a melt. Starting from previously obtained fully equilibrated high molecular weight polymer melts [{\it Zhang et al.} ACS Macro Lett. 3, 198 (2014)] we investigate their static and dynamic scaling behavior as predicted by theory. We find that for semiflexible chains in a melt, results of the mean s… ▽ More We present a detailed study of the static and dynamic behavior of long semiflexible polymer chains in a melt. Starting from previously obtained fully equilibrated high molecular weight polymer melts [{\it Zhang et al.} ACS Macro Lett. 3, 198 (2014)] we investigate their static and dynamic scaling behavior as predicted by theory. We find that for semiflexible chains in a melt, results of the mean square internal distance, the probability distributions of the end-to-end distance, and the chain structure factor are well described by theoretical predictions for ideal chains. We examine the motion of monomers and chains by molecular dynamics simulations using the ESPResSo++ package. The scaling predictions of the mean squared displacement of inner monomers, center of mass, and relations between them based on the Rouse and the reptation theory are verified, and related characteristic relaxation times are determined. Finally we give evidence that the entanglement length $N_{e,PPA}$ as determined by a primitive path analysis (PPA) predicts a plateau modulus, $G_N^0=\frac{4}{5}(ρk_BT/N_e)$, consistent with stresses obtained from the Green-Kubo relation. These comprehensively characterized equilibrium structures, which offer a good compromise between flexibility, small $N_e$, computational efficiency, and small deviations from ideality provide ideal starting states for future non-equilibrium studies. △ Less

Submitted 1 April, 2016; originally announced April 2016.

Comments: 13 pages, 10 figures, to be published in J. Chem. Phys. (2016)

Journal ref: J. Chem. Phys. 144, 154907 (2016)

Mechanism responsible for initiating room temperature ferromagnetism and spin polarized current in diluted magnetic oxides

Authors: Hsiung Chou, Yao-Chung Tsao, G. D. Dwivedi, Cheng-Pang Lin, Shih-Jye Sun, Hua-Shu Hsu, Chun-Chao Huang, Chao-Yao Yang, Yuan-Chieh Tseng, Fang-Cheng Chou

Abstract: The main obstacles in realizing diluted magnetic oxide (DMO) in spintronics are the unknown electronic structures associated with its high TC ferromagnetism and spin polarized current and how to manipulate desired electronic structures by fabrication techniques. We demonstrate that fine-tuned electronic structures and band structures can be modified to initiate DMO properties. Interestingly, in th… ▽ More The main obstacles in realizing diluted magnetic oxide (DMO) in spintronics are the unknown electronic structures associated with its high TC ferromagnetism and spin polarized current and how to manipulate desired electronic structures by fabrication techniques. We demonstrate that fine-tuned electronic structures and band structures can be modified to initiate DMO properties. Interestingly, in the semiconducting state, the doped Co ions and oxygen vacancies contribute non-negligible magnetic moments; and the magnetic coupling between these moments is mediated by the localized carriers via highly spin polarized hopping transport. These results unravel the myth of the origin of spintronic characteristics with desirable electronic states; thereby reopening the door for future applications. △ Less

Submitted 9 November, 2015; originally announced November 2015.

Electrically tunable spin polarization of chiral edge modes in a quantum anomalous Hall insulator

Authors: Rui-Xing Zhang, Hsiu-Chuan Hsu, Chao-Xing Liu

Abstract: In the quantum anomalous Hall effect, chiral edge modes are expected to conduct spin polarized current without dissipation and thus hold great promise for future electronics and spintronics with low energy consumption. However, spin polarization of chiral edge modes has never been established in experiments. In this work, we theoretically study spin polarization of chiral edge modes in the quantum… ▽ More In the quantum anomalous Hall effect, chiral edge modes are expected to conduct spin polarized current without dissipation and thus hold great promise for future electronics and spintronics with low energy consumption. However, spin polarization of chiral edge modes has never been established in experiments. In this work, we theoretically study spin polarization of chiral edge modes in the quantum anomalous Hall effect, based on both the effective model and more realistic tight-binding model constructed from the first principles calculations. We find that spin polarization can be manipulated by tuning either a local gate voltage or the Fermi energy. We also propose to extract spin information of chiral edge modes by contacting the quantum anomalous Hall insulator to a ferromagnetic (FM) lead. The establishment of spin polarization of chiral edge modes, as well as the manipulation and detection in a fully electrical manner, will pave the way to the applications of the quantum anomalous Hall effect in spintronics. △ Less

Submitted 9 May, 2016; v1 submitted 26 June, 2015; originally announced June 2015.

Comments: 12 pages, 10 figures

Journal ref: Phys. Rev. B 93, 235315 (2016)

Thermoelasticity of Fe2+-bearing bridgmanite

Authors: Gaurav Shukla, Zhongqing Wu, Han Hsu, Andrea Floris, Matteo Cococcioni, Renata M. Wentzcovitch

Abstract: We present LDA+U calculations of high temperature elastic properties of bridgmanite with composition (Mg$_{(1-x)}$Fe$_{x}^{2+}$)SiO$_3$ for $0\le{x}\le0.125$. Results of elastic moduli and acoustic velocities for the Mg-end member (x=0) agree very well with the latest high pressure and high temperature experimental measurements. In the iron-bearing system, we focus particularly on the change in th… ▽ More We present LDA+U calculations of high temperature elastic properties of bridgmanite with composition (Mg$_{(1-x)}$Fe$_{x}^{2+}$)SiO$_3$ for $0\le{x}\le0.125$. Results of elastic moduli and acoustic velocities for the Mg-end member (x=0) agree very well with the latest high pressure and high temperature experimental measurements. In the iron-bearing system, we focus particularly on the change in thermoelastic parameters across the state change that occurs in ferrous iron above $\sim$30 GPa, often attributed to a high-spin (HS) to intermediate spin (IS) crossover but explained by first principles calculations as a lateral displacement of substitutional iron in the perovskite cage. We show that the measured effect of this change on the equation of state of this system can be explained by the lateral displacement of substitutional iron, not by the HS to IS crossover. The calculated elastic properties of (Mg$_{0.875}$Fe$_{0.125}^{2+}$)SiO$_3$ along an adiabatic mantle geotherm, somewhat overestimate longitudinal velocities but produce densities and shear velocities quite consistent with Preliminary Reference Earth Model data throughout most of the lower mantle. △ Less

Submitted 19 March, 2015; originally announced March 2015.

Comments: Accepted for Geophysical Research Letters (DOI: 10.1002/2014GL062888)

Lattice Monte Carlo Simulations of Polymer Melts

Authors: Hsiao-Ping Hsu

Abstract: We use Monte Carlo simulations to study polymer melts consisting of fully flexible and moderately stiff chains in the bond fluctuation model at a volume fraction $0.5$. In order to reduce the local density fluctuations, we test a pre-packing process for the preparation of the initial configurations of the polymer melts, before the excluded volume interaction is switched on completely. This process… ▽ More We use Monte Carlo simulations to study polymer melts consisting of fully flexible and moderately stiff chains in the bond fluctuation model at a volume fraction $0.5$. In order to reduce the local density fluctuations, we test a pre-packing process for the preparation of the initial configurations of the polymer melts, before the excluded volume interaction is switched on completely. This process leads to a significantly faster decrease of the number of overlapping monomers on the lattice. This is useful for simulating very large systems, where the statistical properties of the model with a marginally incomplete elimination of excluded volume violations are the same as those of the model with strictly excluded volume. We find that the internal mean square end-to-end distance for moderately stiff chains in a melt can be very well described by a freely rotating chain model with a precise estimate of the bond-bond orientational correlation between two successive bond vectors in equilibrium. The plot of the probability distributions of the reduced end-to-end distance of chains of different stiffness also shows that the data collapse is excellent and described very well by the Gaussian distribution for ideal chains. However, while our results confirm the systematic deviations between Gaussian statistics for the chain structure factor $S_c(q)$ [minimum in the Kratky-plot] found by Wittmer et al.~\{EPL {\bf 77} 56003 (2007).\} for fully flexible chains in a melt, we show that for the available chain length these deviations are no longer visible, when the chain stiffness is included. The mean square bond length and the compressibility estimated from collective structure factors depend slightly on the stiffness of the chains. △ Less

Submitted 3 March, 2015; originally announced March 2015.

Comments: 15 pages, 12 figures

Journal ref: J. Chem. Phys. 141, 234901 (2014)

Monte Carlo Simulations of Lattice Models for Single Polymer Systems

Authors: Hsiao-Ping Hsu

Abstract: Single linear polymer chains in dilute solutions under good solvent conditions are studied by Monte Carlo simulations with the pruned-enriched Rosenbluth method up to the chain length $N \sim {\cal O}(10^4)$. Based on the standard simple cubic lattice model (SCLM) with fixed bond length and the bond fluctuation model (BFM) with bond lengths in a range between $2$ and $\sqrt{10}$, we investigate th… ▽ More Single linear polymer chains in dilute solutions under good solvent conditions are studied by Monte Carlo simulations with the pruned-enriched Rosenbluth method up to the chain length $N \sim {\cal O}(10^4)$. Based on the standard simple cubic lattice model (SCLM) with fixed bond length and the bond fluctuation model (BFM) with bond lengths in a range between $2$ and $\sqrt{10}$, we investigate the conformations of polymer chains described by self-avoiding walks (SAWs) on the simple cubic lattice, and by random walks (RWs) and non-reversible random walks (NRRWs) in the absence of excluded volume (EV) interactions. In addition to flexible chains, we also extend our study to semiflexible chains for different stiffness controlled by a bending potential. The persistence lengths of chains extracted from the orientational correlations are estimated for all cases. We show that chains based on the BFM are more flexible than those based on the SCLM for a fixed bending energy. The microscopic differences between these two lattice models are discussed and the theoretical predictions of scaling laws given in the literature are checked and verified. Our simulations clarify that a different mapping ratio between the coarse-grained models and the atomistically realistic description of polymers is required in a coarse-graining approach due to the different crossovers to the asymptotic behavior. △ Less

Submitted 3 March, 2015; originally announced March 2015.

Comments: 17 pages, 16 figures

Journal ref: J. Chem. Phys. 141, 164903 (2014)

First-principles study of intermediate-spin ferrous iron in the Earth's lower mantle

Authors: Han Hsu, Renata M. Wentzcovitch

Abstract: Spin crossover of iron is of central importance in solid Earth geophysics. It impacts all physical properties of minerals that altogether constitute $\sim 95$ vol\% of the Earth's lower mantle: ferropericlase [(Mg,Fe)O] and Fe-bearing magnesium silicate (MgSiO$_3$) perovskite. Despite great strides made in the past decade, the existence of intermediate-spin (IS) state in ferrous iron (Fe$^{2+}$) (… ▽ More Spin crossover of iron is of central importance in solid Earth geophysics. It impacts all physical properties of minerals that altogether constitute $\sim 95$ vol\% of the Earth's lower mantle: ferropericlase [(Mg,Fe)O] and Fe-bearing magnesium silicate (MgSiO$_3$) perovskite. Despite great strides made in the past decade, the existence of intermediate-spin (IS) state in ferrous iron (Fe$^{2+}$) (with total electron spin $S=1$) and its possible role in the pressure-induced spin crossover in these lower-mantle minerals still remain controversial. Using density functional theory $+$ self-consistent Hubbard $U$ (DFT$+U_{sc}$) calculations, we investigate all possible types of IS states of Fe$^{2+}$ in (Mg,Fe)O and (Mg,Fe)SiO$_3$ perovskite. Among the possible IS states in these minerals, the most probable IS state has an electronic configuration that significantly reduces the electron overlap and the iron nuclear quadrupole splitting (QS). These most probable IS states, however, are still energetically disfavored, and their QSs are inconsistent with Mössbauer spectra. We therefore conclude that IS Fe$^{2+}$ is highly unlikely in the Earth's lower mantle. △ Less

Submitted 27 October, 2014; originally announced October 2014.

Reentrant quantum anomalous Hall effect with in-plane magnetic fields in HgMnTe quantum wells

Authors: Hsiu-Chuan Hsu, Xin Liu, Chao-Xing Liu

Abstract: Quantum anomalous Hall effect has been predicted in HgMnTe quantum wells with an out-of-plane magnetization of Mn atoms. However, since HgMnTe quantum wells are paramagnetic, an out-of-plane magnetic field is required to polarize magnetic moments of Mn atoms, which inevitably induces Landau levels and makes it difficult to identify the origin of the quantized Hall conductance experimentally. In th… ▽ More Quantum anomalous Hall effect has been predicted in HgMnTe quantum wells with an out-of-plane magnetization of Mn atoms. However, since HgMnTe quantum wells are paramagnetic, an out-of-plane magnetic field is required to polarize magnetic moments of Mn atoms, which inevitably induces Landau levels and makes it difficult to identify the origin of the quantized Hall conductance experimentally. In this work, we study the quantum anomalous Hall effect in the presence of an in-plane magnetic field in Mn doped HgTe quantum wells. For a small out-of-plane magnetic field, the in-plane magnetic field can drive the system from a normal insulating state to a quantum anomalous Hall state. When the out-of-plane magnetic field is slightly above the transition point, the system shows a reentrant behavior of Hall conductance, varying from $-e^2/h$ to 0 and back to $-e^2/h$, with increasing in-plane magnetic fields. The reentrant quantum anomalous Hall effect originates from the interplay between the exchange coupling of magnetic moments and the direct Zeeman coupling of magnetic fields. The calculation incorporating Landau levels shows that there is no qualitative change of the reentrant behavior. △ Less

Submitted 9 May, 2013; v1 submitted 9 May, 2013; originally announced May 2013.

Estimation of Persistence Lengths of Semiflexible Polymers: Insight from Simulations

Authors: Hsiao-Ping Hsu, Wolfgang Paul, Kurt Binder

Abstract: The persistence length of macromolecules is one of their basic characteristics, describing their intrinsic local stiffness. However, it is difficult to extract this length from physical properties of the polymers, different recipes may give answers that disagree with each other. Monte Carlo simulations are used to elucidate this problem, giving a comparative discussion of two lattice models, the s… ▽ More The persistence length of macromolecules is one of their basic characteristics, describing their intrinsic local stiffness. However, it is difficult to extract this length from physical properties of the polymers, different recipes may give answers that disagree with each other. Monte Carlo simulations are used to elucidate this problem, giving a comparative discussion of two lattice models, the self-avoiding walk model extended by a bond bending energy, and bottle-brush polymers described by the bond fluctuation model. The conditions are discussed under which a description of such macromolecules by Kratky-Porod worm-like chains holds, and the question to what extent the persistence length depends on external conditions (such as solvent quality) is considered. The scattering function of semiflexible polymers is discussed in detail, a comparison to various analytic treatments is given, and an outlook to experimental work is presented. △ Less

Submitted 11 March, 2013; originally announced March 2013.

Comments: 18 pages, 17 figures, to be published in Polymer Science Ser. C (2013)

In-plane Magnetization Induced Quantum Anomalous Hall Effect

Authors: Xin Liu, Hsiu-Chuan Hsu, Chao-Xing Liu

Abstract: In a two-dimensional electron gas, the quantized Hall conductance can be induced by a strong magnetic field, known as the quantum Hall effect, and it can also result from the strong exchange coupling of magnetic ions, dubbed as the "quantum anomalous Hall effect". The quantum Hall effect requires the out-of-plane magnetic field, and similarly, it is commonly believed that the magnetization should… ▽ More In a two-dimensional electron gas, the quantized Hall conductance can be induced by a strong magnetic field, known as the quantum Hall effect, and it can also result from the strong exchange coupling of magnetic ions, dubbed as the "quantum anomalous Hall effect". The quantum Hall effect requires the out-of-plane magnetic field, and similarly, it is commonly believed that the magnetization should be out-of-plane for the quantum anomalous Hall effect. In the present work, we find this condition is not necessary and predict that the quantum anomalous Hall effect can also be induced by the purely in-plane magnetization in two realistic systems, including Bi$_2$Te$_3$ thin film with magnetic doping and HgMnTe quantum wells with shear strains, when all the reflection symmetries are broken. An experimental setup is proposed to confirm this effect, the observation of which will pave the way to search for the quantum anomalous Hall effect in a wider range of materials. △ Less

Submitted 21 January, 2013; originally announced January 2013.

Comments: 7 pages, 3 figures

Scattering function of semiflexible polymer chains under good solvent conditions

Authors: Hsiao-Ping Hsu, Wolfgang Paul, Kurt Binder

Abstract: Using the pruned-enriched Rosenbluth Monte Carlo algorithm, the scattering functions of semiflexible macromolecules in dilute solution under good solvent conditions are estimated both in $d=2$ and $d=3$ dimensions, considering also the effect of stretching forces. Using self-avoiding walks of up to $N = 25600$ steps on the square and simple cubic lattices, variable chain stiffness is modeled by in… ▽ More Using the pruned-enriched Rosenbluth Monte Carlo algorithm, the scattering functions of semiflexible macromolecules in dilute solution under good solvent conditions are estimated both in $d=2$ and $d=3$ dimensions, considering also the effect of stretching forces. Using self-avoiding walks of up to $N = 25600$ steps on the square and simple cubic lattices, variable chain stiffness is modeled by introducing an energy penalty $ε_b$ for chain bending; varying $q_b=\exp (- ε_b/k_BT)$ from $q_b=1$ (completely flexible chains) to $q_b = 0.005$, the persistence length can be varied over two orders of magnitude. For unstretched semiflexible chains we test the applicability of the Kratky-Porod worm-like chain model to describe the scattering function, and discuss methods for extracting persistence length estimates from scattering. While in $d=2$ the direct crossover from rod-like chains to self-avoiding walks invalidates the Kratky-Porod description, it holds in $d=3$ for stiff chains if the number of Kuhn segments $n_K$ does not exceed a limiting value $n^*_K$ (which depends on the persistence length). For stretched chains, the Pincus blob size enters as a further characteristic length scale. The anisotropy of the scattering is well described by the modified Debye function, if the actual observed chain extension $<X>$ (end-to-end distance in the direction of the force) as well as the corresponding longitudinal and transverse linear dimensions $<X^2> - <X>^2$, $<R_{g,\bot}^2>$ are used. △ Less

Submitted 17 August, 2012; originally announced August 2012.

Comments: 23 pages, 16 figures, 1 table

Ferromagnetic insulating state in tensile-strained LaCoO$_3$ thin films

Authors: Han Hsu, Peter Blaha, Renata M. Wentzcovitch

Abstract: With local density approximation + Hubbard $U$ (LDA+$U$) calculations, we show that the ferromagnetic (FM) insulating state observed in tensile-strained LaCoO$_3$ epitaxial thin films is most likely a mixture of low-spin (LS) and high-spin (HS) Co, namely, a HS/LS mixture state. Compared with other FM states, including the intermediate-spin (IS) state (\textit{metallic} within LDA+$U$), which cons… ▽ More With local density approximation + Hubbard $U$ (LDA+$U$) calculations, we show that the ferromagnetic (FM) insulating state observed in tensile-strained LaCoO$_3$ epitaxial thin films is most likely a mixture of low-spin (LS) and high-spin (HS) Co, namely, a HS/LS mixture state. Compared with other FM states, including the intermediate-spin (IS) state (\textit{metallic} within LDA+$U$), which consists of IS Co only, and the insulating IS/LS mixture state, the HS/LS state is the most favorable one. The FM order in HS/LS state is stabilized via the superexchange interactions between adjacent LS and HS Co. We also show that Co spin state can be identified by measuring the electric field gradient (EFG) at Co nucleus via nuclear magnetic resonance (NMR) spectroscopy. △ Less

Submitted 8 March, 2012; originally announced March 2012.

Journal ref: Phys. Rev. B 85, 140404(R) (2012)