-
Ultrahigh pyroelectricity in monoelemental 2D tellurium
Authors:
Hari Krishna Mishra,
Ayushi Jain,
Dalip Saini,
Bidya Mondal,
Chandan Bera,
Shanker Ram,
Dipankar Mandal
Abstract:
We report an ultrahigh pyroelectric response in van der Waals bonded layers of two-dimensional (2D) tellurium (Te) nanosheets (thickness, d = 4 to 5 nm) at periodic on-off temperature oscillations. For the first time a large pyroelectric coefficient, Pc ~ 3 mC.m-2.K-1, is observed which is eightfold higher than the traditional state-of-the-art pyroelectrics (lead zirconate titanate, PZT). The firs…
▽ More
We report an ultrahigh pyroelectric response in van der Waals bonded layers of two-dimensional (2D) tellurium (Te) nanosheets (thickness, d = 4 to 5 nm) at periodic on-off temperature oscillations. For the first time a large pyroelectric coefficient, Pc ~ 3 mC.m-2.K-1, is observed which is eightfold higher than the traditional state-of-the-art pyroelectrics (lead zirconate titanate, PZT). The first-principles calculations point out that the breakdown of centro-symmetry in the 1-3 Te-layers (P-3m1 space group) of a non-centrosymmetry (higher-order symmetry of C2 space group) on an angular twist in the Te-Te bonds of an exotic electronic state in 2D Te. The angular Te-Te twisting elicits a surface-enhanced Raman band at 101 cm-1 (absent in bulk Te). The stimulation of the Born effective charge, in-plane piezoelectricity and thermal expansion coefficient are shown to tailor the large pyroelectricity. Thus, 2D Te nanosheets present a new paradigm for the wide application of pyroelectric materials for developing thermal energy-based flexible electronics.
△ Less
Submitted 26 July, 2024;
originally announced July 2024.
-
Gate voltage modulation of the superconducting state in a degenerate semiconductor
Authors:
Bikash C. Barik,
Himadri Chakraborti,
Buddhadeb Pal,
Aditya K. Jain,
Swagata Bhunia,
Sounak Samanta,
Apurba Laha,
Suddhasatta Mahapatra,
K. Das Gupta
Abstract:
In this work, we demonstrate that the modulation of carrier density can alter the superconducting transition temperature by up to $204$ mK in epitaxial Indium Nitride on Gallium Nitride, accounting for the $10$% of the transition temperature in ungated conditions. Our samples are likely free from strong localization effects and significant granularity, as indicated by $( k_{f l} \gg 1 )$, suggesti…
▽ More
In this work, we demonstrate that the modulation of carrier density can alter the superconducting transition temperature by up to $204$ mK in epitaxial Indium Nitride on Gallium Nitride, accounting for the $10$% of the transition temperature in ungated conditions. Our samples are likely free from strong localization effects and significant granularity, as indicated by $( k_{f l} \gg 1 )$, suggesting that the primary determinant of the transition temperature in InN is carrier density, rather than disorder scattering. The observed behavior is consistent with BCS s-wave superconductivity, corroborated by the superconducting parameters we measured. Furthermore, we observed a $60$% bipolar suppression of the supercurrent in our experiments.
△ Less
Submitted 13 June, 2024;
originally announced June 2024.
-
Fractonic solids
Authors:
Akash Jain
Abstract:
Fractons are exotic quasiparticles whose mobility in space is restricted by symmetries. In potential real-world realisations, fractons are likely lodged to a physical material rather than absolute space. Motivated by this, we propose and explore a new symmetry principle that restricts the motion of fractons relative to a physical solid. Unlike models with restricted mobility in absolute space, the…
▽ More
Fractons are exotic quasiparticles whose mobility in space is restricted by symmetries. In potential real-world realisations, fractons are likely lodged to a physical material rather than absolute space. Motivated by this, we propose and explore a new symmetry principle that restricts the motion of fractons relative to a physical solid. Unlike models with restricted mobility in absolute space, these fractonic solids admit gauge-invariant momentum density, are compatible with boost symmetry, and can consistently be coupled to gravity. We also propose a holographic model for fractonic solids.
△ Less
Submitted 11 June, 2024;
originally announced June 2024.
-
Bias in Motion: Theoretical Insights into the Dynamics of Bias in SGD Training
Authors:
Anchit Jain,
Rozhin Nobahari,
Aristide Baratin,
Stefano Sarao Mannelli
Abstract:
Machine learning systems often acquire biases by leveraging undesired features in the data, impacting accuracy variably across different sub-populations. Current understanding of bias formation mostly focuses on the initial and final stages of learning, leaving a gap in knowledge regarding the transient dynamics. To address this gap, this paper explores the evolution of bias in a teacher-student s…
▽ More
Machine learning systems often acquire biases by leveraging undesired features in the data, impacting accuracy variably across different sub-populations. Current understanding of bias formation mostly focuses on the initial and final stages of learning, leaving a gap in knowledge regarding the transient dynamics. To address this gap, this paper explores the evolution of bias in a teacher-student setup modeling different data sub-populations with a Gaussian-mixture model. We provide an analytical description of the stochastic gradient descent dynamics of a linear classifier in this setting, which we prove to be exact in high dimension. Notably, our analysis reveals how different properties of sub-populations influence bias at different timescales, showing a shifting preference of the classifier during training. Applying our findings to fairness and robustness, we delineate how and when heterogeneous data and spurious features can generate and amplify bias. We empirically validate our results in more complex scenarios by training deeper networks on synthetic and real datasets, including CIFAR10, MNIST, and CelebA.
△ Less
Submitted 28 May, 2024;
originally announced May 2024.
-
AlabOS: A Python-based Reconfigurable Workflow Management Framework for Autonomous Laboratories
Authors:
Yuxing Fei,
Bernardus Rendy,
Rishi Kumar,
Olympia Dartsi,
Hrushikesh P. Sahasrabuddhe,
Matthew J. McDermott,
Zheren Wang,
Nathan J. Szymanski,
Lauren N. Walters,
David Milsted,
Yan Zeng,
Anubhav Jain,
Gerbrand Ceder
Abstract:
The recent advent of autonomous laboratories, coupled with algorithms for high-throughput screening and active learning, promises to accelerate materials discovery and innovation. As these autonomous systems grow in complexity, the demand for robust and efficient workflow management software becomes increasingly critical. In this paper, we introduce AlabOS, a general-purpose software framework for…
▽ More
The recent advent of autonomous laboratories, coupled with algorithms for high-throughput screening and active learning, promises to accelerate materials discovery and innovation. As these autonomous systems grow in complexity, the demand for robust and efficient workflow management software becomes increasingly critical. In this paper, we introduce AlabOS, a general-purpose software framework for orchestrating experiments and managing resources, with an emphasis on automated laboratories for materials synthesis and characterization. We demonstrate the implementation of AlabOS in a prototype autonomous materials laboratory. AlabOS features a reconfigurable experiment workflow model, enabling the simultaneous execution of varied workflows composed of modular tasks. Therefore, AlabOS is well-suited to handle the rapidly changing experimental protocols defining the progress of self-driving laboratory development for materials research.
△ Less
Submitted 22 May, 2024;
originally announced May 2024.
-
Hydrodynamics of thermal active matter
Authors:
Jay Armas,
Akash Jain,
Ruben Lier
Abstract:
Active matter concerns many-body systems comprised of living or self-driven agents that collectively exhibit macroscopic phenomena distinct from conventional passive matter. Using Schwinger-Keldysh effective field theory, we develop a novel hydrodynamic framework for thermal active matter that accounts for local temperature variations and the ensuing stochastic effects. This framework provides a d…
▽ More
Active matter concerns many-body systems comprised of living or self-driven agents that collectively exhibit macroscopic phenomena distinct from conventional passive matter. Using Schwinger-Keldysh effective field theory, we develop a novel hydrodynamic framework for thermal active matter that accounts for local temperature variations and the ensuing stochastic effects. This framework provides a deeper understanding of energy balance, second law of thermodynamics, and thermostated steady states in active matter, while also addressing the systematic violations of fluctuation-dissipation theorem and detailed balance. We use our framework of active hydrodynamics to develop effective field theory actions for active superfluids and active nematics that offer a first-principle derivation of various active transport coefficients and feature activity-induced phase transitions.
△ Less
Submitted 17 May, 2024;
originally announced May 2024.
-
Double magnetic transition, complex field-induced phases, and large magnetocaloric effect in the frustrated garnet compound Mn$_{3}$Cr$_{2}$Ge$_{3}$O$_{12}$
Authors:
S. Mohanty,
A. Magar,
Vikram Singh,
S. S. Islam,
S. Guchhait,
A. Jain,
S. M. Yusuf,
A. A. Tsirlin,
R. Nath
Abstract:
A detailed study of the magnetic and magnetocaloric properties of a garnet compound Mn$_{3}$Cr$_{2}$Ge$_{3}$O$_{12}$ is carried out using x-ray diffraction, magnetization, heat capacity, and neutron diffraction measurements as well as \textit{ab initio} band-structure calculations. This compound manifests two successive magnetic transitions at $T_{\rm N1} \simeq 4.5$ K and $T_{\rm N2} \simeq 2.7$…
▽ More
A detailed study of the magnetic and magnetocaloric properties of a garnet compound Mn$_{3}$Cr$_{2}$Ge$_{3}$O$_{12}$ is carried out using x-ray diffraction, magnetization, heat capacity, and neutron diffraction measurements as well as \textit{ab initio} band-structure calculations. This compound manifests two successive magnetic transitions at $T_{\rm N1} \simeq 4.5$ K and $T_{\rm N2} \simeq 2.7$ K. Neutron powder diffraction experiments reveal that these two transitions correspond to the collinear and non-collinear antiferromagnetic ordering of the nonfrustrated Cr$^{3+}$ and frustrated Mn$^{2+}$ sublattices, respectively. The interactions within each of the Cr and Mn sublattices are antiferromagnetic, while the inter-sublattice interactions are ferromagnetic. The $H-T$ phase diagram is quite complex and displays multiple phases under magnetic field, which can be attributed to the frustrated nature of the spin lattice. Mn$_{3}$Cr$_{2}$Ge$_{3}$O$_{12}$ shows a large magnetocaloric effect with a maximum value of isothermal entropy change $ΔS_{\rm m} \simeq -23$ J/kg-K and adiabatic temperature change $ΔT_{\rm ad} \simeq 9$ K for a field change of 7 T. Further, a large value of the relative cooling power ($RCP \simeq 360$ J/kg) demonstrates the promise of using this compound in magnetic refrigeration.
△ Less
Submitted 13 March, 2024; v1 submitted 4 March, 2024;
originally announced March 2024.
-
Higher-group global symmetry and the bosonic M5 brane
Authors:
Jay Armas,
Giorgos Batzios,
Akash Jain
Abstract:
Higher-group symmetries are combinations of higher-form symmetries which appear in various field theories. In this paper, we explain how higher-group symmetries arise in 10d and 11d supergravities when the latter are coupled to brane sources. Motivated by this observation, we study field theories at zero and finite temperature invariant under a class of continuous Abelian higher-group symmetries.…
▽ More
Higher-group symmetries are combinations of higher-form symmetries which appear in various field theories. In this paper, we explain how higher-group symmetries arise in 10d and 11d supergravities when the latter are coupled to brane sources. Motivated by this observation, we study field theories at zero and finite temperature invariant under a class of continuous Abelian higher-group symmetries. We restrict the analysis to the low-energy regime where the dynamical field content exclusively consists of Goldstone fields arising from the spontaneous breaking of higher-group and spacetime symmetries. Invariant quantities are constructed and the phases of matter are classified according to the pattern of spontaneous symmetry breaking. With respect to supergravity, we highlight how such Goldstone effective theories provide a symmetry-based interpretation for the theories living on D/M-branes. As an explicit example we construct a 6-group invariant action for the bosonic M5 brane, consistent with the self-duality of the 3-form field strength on the brane. While the self-duality condition in the bosonic case needs to be imposed externally as a constraint at zero temperature, we find an equilibrium effective action for the bosonic M5 brane at finite temperature that inherently implements self-duality.
△ Less
Submitted 20 March, 2024; v1 submitted 29 February, 2024;
originally announced February 2024.
-
Low frequency resistance fluctuations in an ionic liquid gated channel probed by cross-correlation noise spectroscopy
Authors:
Bikash C. Barik,
Himadri Chakraborti,
Aditya K. Jain,
Buddhadeb Pal,
H. E. Beere,
D. A. Ritchie,
K. Das Gupta
Abstract:
A system in equilibrium keeps ``exploring" nearby states in the phase space and consequently, fluctuations can contain information, that the mean value does not. However, such measurements involve a fairly complex interplay of effects arising in the device and measurement electronics, that are non-trivial to disentangle. In this paper, we briefly analyse some of these issues and show the relevance…
▽ More
A system in equilibrium keeps ``exploring" nearby states in the phase space and consequently, fluctuations can contain information, that the mean value does not. However, such measurements involve a fairly complex interplay of effects arising in the device and measurement electronics, that are non-trivial to disentangle. In this paper, we briefly analyse some of these issues and show the relevance of a two-amplifier cross-correlation technique for semiconductors and thin films commonly encountered. We show that by using home-built amplifiers costing less than $10$ USD/piece one can measure spectral densities as low as $\sim 10^{-18}-10^{-19}~ {\rm {V^2}{Hz^{-1}}}$. We apply this method to an ionic liquid gated Ga:ZnO channel and show that the glass transition of the ionic liquid brings about a change in the exponent of the low frequency resistance fluctuations. Our analysis suggests that a log-normal distribution of the Debye relaxation times of the fluctuations and an increased weight of the long timescale relaxations can give a semi-quantitative explanation of the observed change in the exponent.
△ Less
Submitted 20 February, 2024;
originally announced February 2024.
-
Weyl semimetallic state with antiferromagnetic order in Rashba-Hubbard model
Authors:
Aastha Jain,
Garima Goyal,
Dheeraj Kumar Singh
Abstract:
We study the phase diagram of Rashba-Hubbard model by employing the Hartree-Fock meanfield theory, and thereby establish the existence of an antiferromagnetically ordered Weyl semimetallic state with in-plane magnetic moments. This phase is found to be sandwiched in between the antiferromagnetic insulator and Rashba metal in the interaction vs spin-orbit coupling phase diagram. The antiferromagnet…
▽ More
We study the phase diagram of Rashba-Hubbard model by employing the Hartree-Fock meanfield theory, and thereby establish the existence of an antiferromagnetically ordered Weyl semimetallic state with in-plane magnetic moments. This phase is found to be sandwiched in between the antiferromagnetic insulator and Rashba metal in the interaction vs spin-orbit coupling phase diagram. The antiferromagnetically-ordered topological semimetallic state exists in the presence of combined time-reversal and inversion symmetry though individually both are broken. The study of the static magnetic susceptibility indicates the robustness of the antiferromagnetic order within a realistic range of interaction and spin-orbit coupling parameters. In addition to the edge states associated with the Weyl points, we also investigate the spin-resolved quasiparticle interference, which provides important insight into the possible spin texture of the bands especially in the vicinity of Weyl points.
△ Less
Submitted 3 February, 2024;
originally announced February 2024.
-
Dipole superfluid hydrodynamics II
Authors:
Akash Jain,
Kristan Jensen,
Ruochuan Liu,
Eric Mefford
Abstract:
We present a dissipative hydrodynamic theory of "s-wave dipole superfluids" that arise in phases of translation-invariant and dipole-symmetric models in which the U(1) symmetry is spontaneously broken. The hydrodynamic description is subtle on account of an analogue of dangerously irrelevant operators, which requires us to formalize an entirely new derivative counting scheme suitable for these flu…
▽ More
We present a dissipative hydrodynamic theory of "s-wave dipole superfluids" that arise in phases of translation-invariant and dipole-symmetric models in which the U(1) symmetry is spontaneously broken. The hydrodynamic description is subtle on account of an analogue of dangerously irrelevant operators, which requires us to formalize an entirely new derivative counting scheme suitable for these fluids. We use our hydrodynamic model to investigate the linearized response of such a fluid, characterized by sound modes $ω\sim \pm k - ik^2$, shear modes $ω\sim-ik^2$, and magnon-like propagating modes $ω\sim \pm k^2 - ik^4$ that are the dipole-invariant version of superfluid "second sound" modes. We find that these fluids can also admit equilibrium states with "dipole superflow" that resemble a polarized medium. Finally, we couple our theory to slowly varying background fields, which allows us to compute response functions of hydrodynamic operators and Kubo formulas for hydrodynamic transport coefficients.
△ Less
Submitted 29 January, 2024;
originally announced January 2024.
-
Hydrostatic pressure effect on structural and transport properties of co-existing layered and disordered rock-salt phase of LixCoO2
Authors:
Thiagarajan Maran,
A. Jain,
Muthukumaran Sundaramoorthy,
A. P. Roy,
Boby Joseph,
Govindaraj Lingannan,
Ashwin Mohan,
D. Bansal,
S. M. Yusuf,
Arumugam Sonachalam,
.
Abstract:
It is widely believed that the origin of a significant cause for the voltage and capacity fading observed in lithium (Li)-ion batteries is related to structural modifications occurring in the cathode material during the Li-ion insertion/de-insertion process. The Li-ion insertion/de-insertion mechanism and the resulting structural changes are known to exert a severe strain on the lattice, and conse…
▽ More
It is widely believed that the origin of a significant cause for the voltage and capacity fading observed in lithium (Li)-ion batteries is related to structural modifications occurring in the cathode material during the Li-ion insertion/de-insertion process. The Li-ion insertion/de-insertion mechanism and the resulting structural changes are known to exert a severe strain on the lattice, and consequently leading to performance degradation. Here, with a view to shed more light on the effect of such strain on the structural properties of the cathode material, we have systematically investigated the pressure dependence of structural and transport properties of an LixCoO2 single crystal, grown using 5% excess Li in the precursors. Ambient pressure synchrotron diffraction on these crystals reveals that, the excess Li during the growth, has facilitated the stabilization of a layered rhombohedral phase (space group R3m) as well as a disordered rock-salt phase (space group Fm3m). The volume fraction of the rhombohedral and cubic phase is 60:40, respectively, which remains unchanged up to 10.6 GPa. No structural phase transition has been observed up to 10.6 GPa. An increase in resistance with a decrease in temperature has revealed the semi-metallic nature of the sample. Further, the application of hydrostatic pressure up to 2.8 GPa shows the enhancement of semi-metallic nature. The obtained experimental results can be qualitatively explained via density functional theory (DFT) and thermodynamics modelling. The calculated density of states was reduced, and the activation energy was increased by applied pressure. Our investigations indicate a significant phase stability of the mixed phase crystals under externally applied high pressure and thus suggest the possible use of such mixed phase materials as a cathode in lithium-ion batteries.
△ Less
Submitted 21 January, 2024;
originally announced January 2024.
-
Natural Aging and Vacancy Trapping in Al-6xxx
Authors:
Abhinav C. P. Jain,
M. Ceriotti,
W. A. Curtin
Abstract:
Undesirable natural aging (NA) in Al-6xxx delays subsequent artificial aging (AA) but the size, composition, and evolution of clustering are challenging to measure. Here, atomistic details of early-stage clustering in Al-1\%Mg-0.6\%Si during NA are studied computationally using a chemically-accurate neural-network potential. Feasible growth paths for the preferred $β''$ precipitates identify: domi…
▽ More
Undesirable natural aging (NA) in Al-6xxx delays subsequent artificial aging (AA) but the size, composition, and evolution of clustering are challenging to measure. Here, atomistic details of early-stage clustering in Al-1\%Mg-0.6\%Si during NA are studied computationally using a chemically-accurate neural-network potential. Feasible growth paths for the preferred $β''$ precipitates identify: dominant clusters differing from $β''$ motifs; spontaneous vacancy-interstitial formation creating 14-18 solute atom $β''$-like motifs; and lower-energy clusters requiring chemical re-arrangement to form $β''$ nuclei. Quasi-on-lattice kinetic Monte Carlo simulations reveal that 8-14 solute atom clusters form within 1000 s but that growth slows considerably due to vacancy trapping inside clusters, with trapping energies of 0.3-0.5 eV. These findings rationalize why cluster growth and alloy hardness saturate during NA, confirm the concept of ''vacancy prisons", and suggest why clusters must be dissolved during AA before formation of $β''$. This atomistic understanding of NA may enable design of strategies to mitigate negative effects of NA.
△ Less
Submitted 26 November, 2023;
originally announced November 2023.
-
Directed Evolution of Microorganisms for Engineered Living Materials
Authors:
Julie M. Laurent,
Ankit Jain,
Anton Kan,
Mathias Steinacher,
Nadia Enrriquez Casimiro,
Stavros Stavrakis,
Andrew J. deMello,
André R. Studart
Abstract:
Microorganisms can create engineered materials with exquisite structures and living functionalities. Although synthetic biology tools to genetically manipulate microorganisms continue to expand, the bottom-up rational design of engineered living materials still relies on prior knowledge of genotype-phenotype links for the function of interest. Here, we utilize a high-throughput directed evolution…
▽ More
Microorganisms can create engineered materials with exquisite structures and living functionalities. Although synthetic biology tools to genetically manipulate microorganisms continue to expand, the bottom-up rational design of engineered living materials still relies on prior knowledge of genotype-phenotype links for the function of interest. Here, we utilize a high-throughput directed evolution platform to enhance the fitness of whole microorganisms under selection pressure and identify novel genetic pathways to program the functionalities of engineered living materials. Using Komagataeibacter sucrofermentans as a model cellulose-producing microorganism, we show that our droplet-based microfluidic platform enables the directed evolution of these bacteria towards a small number of cellulose overproducers from an initial pool of 40'000 random mutants. Sequencing of the evolved strains reveals an unexpected link between the cellulose-forming ability of the bacteria and a gene encoding a protease complex responsible for protein turnover in the cell. The ability to enhance the fitness of microorganisms towards specific phenotypes and to discover new genotype-phenotype links makes this high-throughput directed evolution platform a promising tool for the development of the next generation of engineered living materials.
△ Less
Submitted 22 November, 2023;
originally announced November 2023.
-
Cross-Plane Thermal Transport in Layered Materials
Authors:
Amey G. Gokhale,
Ankit Jain
Abstract:
The cross-plane (across-layers) phonon thermal transport of five diverse, layered semiconductors is investigated by accounting for higher-order four-phonon scattering, phonon renormalization, and multi-channel thermal transport. For materials having relatively large cross-plane thermal conductivity (AlB6, MoS2, and MoSi2N4), phonons contributing to cross-plane conductivity have an order of magnitu…
▽ More
The cross-plane (across-layers) phonon thermal transport of five diverse, layered semiconductors is investigated by accounting for higher-order four-phonon scattering, phonon renormalization, and multi-channel thermal transport. For materials having relatively large cross-plane thermal conductivity (AlB6, MoS2, and MoSi2N4), phonons contributing to cross-plane conductivity have an order of magnitude larger mean free path than that for the basal-plane thermal transport, whereas the opposite effect is observed for materials with low thermal conductivity (MoO3 and KCuSe). The contribution from the wave-like coherent transport channel is less than 5% in all considered materials. Our work unravels the contrasting role of nano-structuring on the basal- vs. cross-plane thermal conductivity of low and high thermal conductivity layered materials.
△ Less
Submitted 6 November, 2023;
originally announced November 2023.
-
End-to-end Material Thermal Conductivity Prediction through Machine Learning
Authors:
Yagyank Srivastava,
Ankit Jain
Abstract:
We investigated the accelerated prediction of the thermal conductivity of materials through end- to-end structure-based approaches employing machine learning methods. Due to the non-availability of high-quality thermal conductivity data, we first performed high-throughput calculations based on first principles and the Boltzmann transport equation for 225 materials, effectively more than doubling t…
▽ More
We investigated the accelerated prediction of the thermal conductivity of materials through end- to-end structure-based approaches employing machine learning methods. Due to the non-availability of high-quality thermal conductivity data, we first performed high-throughput calculations based on first principles and the Boltzmann transport equation for 225 materials, effectively more than doubling the size of the existing dataset. We assessed the performance of state-of-the-art machine learning models for thermal conductivity prediction on this expanded dataset and observed that all these models suffered from overfitting. To address this issue, we introduced a novel graph-based neural network model, which demonstrated more consistent and regularized performance across all evaluated datasets. Nevertheless, the best mean absolute percentage error achieved on the test dataset remained in the range of 50-60%. This suggests that while these models are valuable for expediting material screening, their current accuracy is still limited.
△ Less
Submitted 6 November, 2023;
originally announced November 2023.
-
Understanding Phonon Thermal Transport in Twisted Bilayer Graphene
Authors:
Shahid Ahmed,
Shadab Alam,
Ankit Jain
Abstract:
The phonon thermal transport properties of twisted bi-layer graphene are investigated using lattice dynamics and the Boltzmann transport equation. The thermal conductivities of 13.2 and 21.8 twisted configurations are 56% and 36% lower than the untwisted configuration which has a room temperature thermal conductivity of 2260 W/m-K. The reason for this lower thermal conductivity is unraveled from p…
▽ More
The phonon thermal transport properties of twisted bi-layer graphene are investigated using lattice dynamics and the Boltzmann transport equation. The thermal conductivities of 13.2 and 21.8 twisted configurations are 56% and 36% lower than the untwisted configuration which has a room temperature thermal conductivity of 2260 W/m-K. The reason for this lower thermal conductivity is unraveled from phonon mode-level analysis made possible through the untwisting of layers. Due to a large commensurate unitcell of twisted configuration, the Brillouin zone is folded but this folding has no bearing on the phonon scattering phase space. The major impact of twisting is felt by flexural phonons with out-of-plane vibrations via the change in strength of flexural interatomic interactions and since these flexural phonons carry majority of the heat in bilayer graphene (65% at room temperature), the thermal conductivity is sensitive to layer twisting. Our study suggests that twisting will affect thermal transport only for those materials that have a major contribution from flexural phonon modes.
△ Less
Submitted 6 November, 2023;
originally announced November 2023.
-
Non-ballistic Thermal Transport in Carbon Nanotubes
Authors:
Ankit Jain
Abstract:
The thermal transport properties of single-wall carbon nanotubes (SWCNTs) are re-investigated using the iterative solution of the Boltzmann transport equation by including four-phonon scattering. Using only three-phonon scattering, the flexural and twisted phonon modes are found to remain non-scattered via Umklapp processes, resulting in the literature-reported divergence of thermal conductivity w…
▽ More
The thermal transport properties of single-wall carbon nanotubes (SWCNTs) are re-investigated using the iterative solution of the Boltzmann transport equation by including four-phonon scattering. Using only three-phonon scattering, the flexural and twisted phonon modes are found to remain non-scattered via Umklapp processes, resulting in the literature-reported divergence of thermal conductivity with tube length. However, with four-phonon scattering, while longitudinal modes remain unaffected, the otherwise non-scattered transverse modes undergo Umklapp scattering and result in a non-ballistic transport, thus settling a decades-long debate on the length dependence of thermal conductivity of SWCNTs. The predicted thermal conductivity of SWCNTs using both three- and four-phonon scatterings is 3700 W/m-K at 300 K and stays highest amongst all known materials.
△ Less
Submitted 6 November, 2023;
originally announced November 2023.
-
Rich Magnetic Phase Diagram of Putative Helimagnet Sr$_3$Fe$_2$O$_7$
Authors:
Nikita D. Andriushin,
Justus Grumbach,
Jung-Hwa Kim,
Manfred Reehuis,
Yuliia V. Tymoshenko,
Yevhen A. Onykiienko,
Anil Jain,
W. Andrew MacFarlane,
Andrey Maljuk,
Sergey Granovsky,
Andreas Hoser,
Vladimir Pomjakushin,
Jacques Ollivier,
Mathias Doerr,
Bernhard Keimer,
Dmytro S. Inosov,
Darren C. Peets
Abstract:
The cubic perovskite SrFeO$_3$ was recently reported to host hedgehog- and skyrmion-lattice phases in a highly symmetric crystal structure which does not support the Dzyaloshinskii-Moriya interactions commonly invoked to explain such magnetic order. Hints of a complex magnetic phase diagram have also recently been found in powder samples of the single-layer Ruddlesden-Popper analog Sr$_2$FeO$_4$,…
▽ More
The cubic perovskite SrFeO$_3$ was recently reported to host hedgehog- and skyrmion-lattice phases in a highly symmetric crystal structure which does not support the Dzyaloshinskii-Moriya interactions commonly invoked to explain such magnetic order. Hints of a complex magnetic phase diagram have also recently been found in powder samples of the single-layer Ruddlesden-Popper analog Sr$_2$FeO$_4$, so a reinvestigation of the bilayer material Sr$_3$Fe$_2$O$_7$, believed to be a simple helimagnet, is called for. Our magnetization and dilatometry studies reveal a rich magnetic phase diagram with at least 6 distinct magnetically ordered phases and strong similarities to that of SrFeO$_3$. In particular, at least one phase is apparently multiple-$\mathbf{q}$, and the $\mathbf{q}$s are not observed to vary among the phases. Since Sr$_3$Fe$_2$O$_7$ has only two possible orientations for its propagation vector, some of the phases are likely exotic multiple-$\mathbf{q}$ order, and it is possible to fully detwin all phases and more readily access their exotic physics.
△ Less
Submitted 14 November, 2023; v1 submitted 27 September, 2023;
originally announced September 2023.
-
Schwinger-Keldysh effective field theory for stable and causal relativistic hydrodynamics
Authors:
Akash Jain,
Pavel Kovtun
Abstract:
We construct stable and causal effective field theories (EFTs) for describing statistical fluctuations in relativistic diffusion and relativistic hydrodynamics. These EFTs are fully non-linear, including couplings to background sources, and enable us to compute n-point time-ordered correlation functions including the effects of statistical fluctuations. The EFTs we construct are inspired by the Ma…
▽ More
We construct stable and causal effective field theories (EFTs) for describing statistical fluctuations in relativistic diffusion and relativistic hydrodynamics. These EFTs are fully non-linear, including couplings to background sources, and enable us to compute n-point time-ordered correlation functions including the effects of statistical fluctuations. The EFTs we construct are inspired by the Maxwell-Cattaneo model of relativistic diffusion and Müller-Israel-Stewart model of relativistic hydrodynamics respectively, and have been derived using both the Martin-Siggia-Rose and Schwinger-Keldysh formalisms. The EFTs non-linearly realise the dynamical Kubo-Martin-Schwinger (KMS) symmetry, which ensures that n-point correlation functions and interactions in the theory satisfy the appropriate fluctuation-dissipation theorems. Since these EFTs typically admit ultraviolet sectors that are not fixed by the low-energy infrared symmetries, we find that they simultaneously admit multiple realisations of the dynamical KMS symmetry. We also comment on certain obstructions to including statistical fluctuations in the recently-proposed stable and causal Bemfica-Disconzi-Noronha-Kovtun model of relativistic hydrodynamics.
△ Less
Submitted 1 September, 2023;
originally announced September 2023.
-
Matbench Discovery -- A framework to evaluate machine learning crystal stability predictions
Authors:
Janosh Riebesell,
Rhys E. A. Goodall,
Philipp Benner,
Yuan Chiang,
Bowen Deng,
Alpha A. Lee,
Anubhav Jain,
Kristin A. Persson
Abstract:
Matbench Discovery simulates the deployment of machine learning (ML) energy models in a high-throughput search for stable inorganic crystals. We address the disconnect between (i) thermodynamic stability and formation energy and (ii) in-domain vs out-of-distribution performance. Alongside this paper, we publish a Python package to aid with future model submissions and a growing online leaderboard…
▽ More
Matbench Discovery simulates the deployment of machine learning (ML) energy models in a high-throughput search for stable inorganic crystals. We address the disconnect between (i) thermodynamic stability and formation energy and (ii) in-domain vs out-of-distribution performance. Alongside this paper, we publish a Python package to aid with future model submissions and a growing online leaderboard with further insights into trade-offs between various performance metrics. To answer the question which ML methodology performs best at materials discovery, our initial release explores a variety of models including random forests, graph neural networks (GNN), one-shot predictors, iterative Bayesian optimizers and universal interatomic potentials (UIP). Ranked best-to-worst by their test set F1 score on thermodynamic stability prediction, we find CHGNet > M3GNet > MACE > ALIGNN > MEGNet > CGCNN > CGCNN+P > Wrenformer > BOWSR > Voronoi tessellation fingerprints with random forest. The top 3 models are UIPs, the winning methodology for ML-guided materials discovery, achieving F1 scores of ~0.6 for crystal stability classification and discovery acceleration factors (DAF) of up to 5x on the first 10k most stable predictions compared to dummy selection from our test set. We also highlight a sharp disconnect between commonly used global regression metrics and more task-relevant classification metrics. Accurate regressors are susceptible to unexpectedly high false-positive rates if those accurate predictions lie close to the decision boundary at 0 eV/atom above the convex hull where most materials are. Our results highlight the need to focus on classification metrics that actually correlate with improved stability hit rate.
△ Less
Submitted 4 February, 2024; v1 submitted 28 August, 2023;
originally announced August 2023.
-
Dipole superfluid hydrodynamics
Authors:
Akash Jain,
Kristan Jensen,
Ruochuan Liu,
Eric Mefford
Abstract:
We construct a theory of hydrodynamic transport for systems with conserved dipole moment, U(1) charge, energy, and momentum. These models have been considered in the context of fractons, since their elementary and isolated charges are immobile by symmetry, and have two known translation-invariant gapless phases: a "p-wave dipole superfluid" phase where the dipole symmetry is spontaneously broken a…
▽ More
We construct a theory of hydrodynamic transport for systems with conserved dipole moment, U(1) charge, energy, and momentum. These models have been considered in the context of fractons, since their elementary and isolated charges are immobile by symmetry, and have two known translation-invariant gapless phases: a "p-wave dipole superfluid" phase where the dipole symmetry is spontaneously broken and a "s-wave dipole superfluid" phase where both the U(1) and dipole symmetries are spontaneously broken. We argue on grounds of symmetry and thermodynamics that there is no transitionally-invariant gapless fluid with unbroken dipole symmetry. In this work, we primarily focus on the hydrodynamic description of p-wave dipole superfluids, including leading dissipative corrections. That theory has, in a sense, a dynamical scaling exponent $z=2$, and its spectrum of fluctuations includes novel subdiffusive modes $ω\sim -i k^4$ in the shear sector and magnon-like sound mode $ω\sim \pm k^2 -i k^2$. By coupling the fluid to background fields, we find response functions of the various symmetry currents. We also present a preliminary generalization of our work to s-wave dipole superfluids, which resemble $z=1$ fluids and feature sound waves and diffusive shear modes, as in an ordinary fluid. However, the spectrum also contains a magnon-like second-sound mode $ω\sim \pm k^2 \pm k^4 -i k^4$ with subdiffusive attenuation.
△ Less
Submitted 29 January, 2024; v1 submitted 19 April, 2023;
originally announced April 2023.
-
Single-Step Synthesis of Shape-Controlled Polymeric Particles using Initiated Chemical Vapor Deposition in Liquid Crystals
Authors:
Apoorva Jain,
Soumyamouli Pal,
Nicholas L. Abbott,
Rong Yang
Abstract:
The ability to synthesize shape-controlled polymer particles will benefit a wide range of applications including targeted drug delivery and metamaterials with reconfigurable structures, but existing synthesis approaches are commonly multistep and limited to a narrow size/shape range. Using a novel single-step synthesis technique, a variety of shapes including nanospheres, hemispherical micro-domes…
▽ More
The ability to synthesize shape-controlled polymer particles will benefit a wide range of applications including targeted drug delivery and metamaterials with reconfigurable structures, but existing synthesis approaches are commonly multistep and limited to a narrow size/shape range. Using a novel single-step synthesis technique, a variety of shapes including nanospheres, hemispherical micro-domes, orientation-controlled microgels, microspheres, spheroids, and micro-discs were obtained. The shape-controlled particles were synthesized by polymerizing divinylbenzene (DVB) via initiated chemical vapor deposition (iCVD) in nematic liquid crystals (LC). iCVD continuously and precisely delivered vapor-phase reactants, thus avoiding disruption of the LC structure, a critical limitation in past LC-templated polymerization. That shape controllability was further enabled by leveraging LC as a real-time display of the polymerization conditions and progression, using a custom in-situ long-focal range microscope. Detailed image analysis unraveled key mechanisms in polymer synthesis in LC. Poor solubilization by nematic LC led to the formation of pDVB nanospheres, distinct from microspheres obtained in isotropic solvents. The nanospheres precipitated to the LC-solid interface and further aggregated into microgel clusters with controlled orientation that was guided by the LC molecular alignment. On further polymerization, microgel clusters phase separated to form microspheres, spheroids, and unique disc-shaped particles.
△ Less
Submitted 9 March, 2023;
originally announced March 2023.
-
Crystal Toolkit: A Web App Framework to Improve Usability and Accessibility of Materials Science Research Algorithms
Authors:
Matthew Horton,
Jimmy-Xuan Shen,
Jordan Burns,
Orion Cohen,
François Chabbey,
Alex M. Ganose,
Rishabh Guha,
Patrick Huck,
Hamming Howard Li,
Matthew McDermott,
Joseph Montoya,
Guy Moore,
Jason Munro,
Cody O'Donnell,
Colin Ophus,
Guido Petretto,
Janosh Riebesell,
Steven Wetizner,
Brook Wander,
Donald Winston,
Ruoxi Yang,
Steven Zeltmann,
Anubhav Jain,
Kristin A. Persson
Abstract:
Crystal Toolkit is an open source tool for viewing, analyzing and transforming crystal structures, molecules and other common forms of materials science data in an interactive way. It is intended to help beginners rapidly develop web-based apps to explore their own data or to help developers make their research algorithms accessible to a broader audience of scientists who might not have any traini…
▽ More
Crystal Toolkit is an open source tool for viewing, analyzing and transforming crystal structures, molecules and other common forms of materials science data in an interactive way. It is intended to help beginners rapidly develop web-based apps to explore their own data or to help developers make their research algorithms accessible to a broader audience of scientists who might not have any training in computer programming and who would benefit from graphical interfaces. Crystal Toolkit comes with a library of ready-made components that can be assembled to make complex web apps: simulation of powder and single crystalline diffraction patterns, convex hull phase diagrams, Pourbaix diagrams, electronic band structures, analysis of local chemical environments and symmetry, and more. Crystal Toolkit is now powering the Materials Project website frontend, providing user-friendly access to its database of computed materials properties. In the future, it is hoped that new visualizations might be prototyped using Crystal Toolkit to help explore new forms of data being generated by the materials science community, and that this in turn can help new materials scientists develop intuition for how their data behaves and the insights that might be found within. Crystal Toolkit will remain a work-in-progress and is open to contributions from the community.
△ Less
Submitted 27 February, 2023; v1 submitted 13 February, 2023;
originally announced February 2023.
-
Approximate higher-form symmetries, topological defects, and dynamical phase transitions
Authors:
Jay Armas,
Akash Jain
Abstract:
Higher-form symmetries are a valuable tool for classifying topological phases of matter. However, emergent higher-form symmetries in interacting many-body quantum systems are not typically exact due to the presence of topological defects. In this paper, we develop a systematic framework for building effective theories with approximate higher-form symmetries, i.e. higher-form symmetries that are we…
▽ More
Higher-form symmetries are a valuable tool for classifying topological phases of matter. However, emergent higher-form symmetries in interacting many-body quantum systems are not typically exact due to the presence of topological defects. In this paper, we develop a systematic framework for building effective theories with approximate higher-form symmetries, i.e. higher-form symmetries that are weakly explicitly broken. We focus on a continuous U(1) q-form symmetry and study various patterns of symmetry breaking. This includes spontaneous or explicit breaking of higher-form symmetries, as well as pseudo-spontaneous symmetry breaking patterns where the higher-form symmetry is both spontaneously and explicitly broken. We uncover a web of dualities between such phases and highlight their role in describing the presence of dynamical higher-form vortices. In order to study the out-of-equilibrium dynamics of these phases of matter, we formulate respective hydrodynamic theories and study the spectra of excitations exhibiting higher-form charge relaxation and Goldstone relaxation effects. We show that our framework is able to describe various phase transitions due to proliferation of vortices or defects. This includes the melting transition in smectic crystals, the plasma phase transition from polarised gases to magnetohydrodynamics, the spin-ice transition, the superfluid to neutral fluid transition and the Meissner effect in superconductors, among many others.
△ Less
Submitted 23 January, 2023;
originally announced January 2023.
-
Optimization analysis of an endoreversible quantum heat engine with efficient power function
Authors:
Kirandeep Kaur,
Anmol Jain,
Love Sahajbir Singh,
Rakesh Singla,
Shishram Rebari
Abstract:
We study the optimal performance of an endoreversible quantum dot heat engine, in which the heat transfer between the system and baths is mediated by qubits, operating under the conditions of a trade-off objective function known as maximum efficient power function defined by the product of power and efficiency of the engine. First, we numerically study the optimization of the efficient power funct…
▽ More
We study the optimal performance of an endoreversible quantum dot heat engine, in which the heat transfer between the system and baths is mediated by qubits, operating under the conditions of a trade-off objective function known as maximum efficient power function defined by the product of power and efficiency of the engine. First, we numerically study the optimization of the efficient power function for the engine under consideration. Then, we obtain some analytic results by applying hightemperature limit and compare the performance of the engine at maximum efficient power functionto the engine operating in the maximum power regime. We find that the engine operating at maximum efficient power function produces at least 88.89% of the maximum power output while at the same time reduces the power loss due to entropy production by considerable amount. We conclude by studying the stochastic simulations of the efficiency of the engine in maximum power and maximum efficient power regime. We find that the engine operating at maximum power is subjected to less power fluctuations as compared to the on one operating at maximum efficient power function.
△ Less
Submitted 10 January, 2023;
originally announced January 2023.
-
Structured information extraction from complex scientific text with fine-tuned large language models
Authors:
Alexander Dunn,
John Dagdelen,
Nicholas Walker,
Sanghoon Lee,
Andrew S. Rosen,
Gerbrand Ceder,
Kristin Persson,
Anubhav Jain
Abstract:
Intelligently extracting and linking complex scientific information from unstructured text is a challenging endeavor particularly for those inexperienced with natural language processing. Here, we present a simple sequence-to-sequence approach to joint named entity recognition and relation extraction for complex hierarchical information in scientific text. The approach leverages a pre-trained larg…
▽ More
Intelligently extracting and linking complex scientific information from unstructured text is a challenging endeavor particularly for those inexperienced with natural language processing. Here, we present a simple sequence-to-sequence approach to joint named entity recognition and relation extraction for complex hierarchical information in scientific text. The approach leverages a pre-trained large language model (LLM), GPT-3, that is fine-tuned on approximately 500 pairs of prompts (inputs) and completions (outputs). Information is extracted either from single sentences or across sentences in abstracts/passages, and the output can be returned as simple English sentences or a more structured format, such as a list of JSON objects. We demonstrate that LLMs trained in this way are capable of accurately extracting useful records of complex scientific knowledge for three representative tasks in materials chemistry: linking dopants with their host materials, cataloging metal-organic frameworks, and general chemistry/phase/morphology/application information extraction. This approach represents a simple, accessible, and highly-flexible route to obtaining large databases of structured knowledge extracted from unstructured text. An online demo is available at http://www.matscholar.com/info-extraction.
△ Less
Submitted 10 December, 2022;
originally announced December 2022.
-
Hydrodynamics of plastic deformations in electronic crystals
Authors:
Jay Armas,
Erik van Heumen,
Akash Jain,
Ruben Lier
Abstract:
We construct a new hydrodynamic framework describing plastic deformations in electronic crystals. The framework accounts for pinning, phase, and momentum relaxation effects due to translational disorder, diffusion due to the presence of interstitials and vacancies, and strain relaxation due to plasticity and dislocations. We obtain the hydrodynamic mode spectrum and correlation functions in variou…
▽ More
We construct a new hydrodynamic framework describing plastic deformations in electronic crystals. The framework accounts for pinning, phase, and momentum relaxation effects due to translational disorder, diffusion due to the presence of interstitials and vacancies, and strain relaxation due to plasticity and dislocations. We obtain the hydrodynamic mode spectrum and correlation functions in various regimes in order to identify the signatures of plasticity in electronic crystal phases. In particular, we show that proliferation of dislocations de-pins the spatially resolved conductivity until the crystal melts, after which point a new phase of a pinned electronic liquid emerges. In addition, the mode spectrum exhibits a competition between pinning and plasticity effects, with the damping rate of some modes being controlled by pinning-induced phase relaxation and some by plasticity-induced strain relaxation. We find that the recently discovered damping-attenuation relation continues to hold for pinned-induced phase relaxation even in the presence of plasticity and dislocations. We also comment on various experimental setups that could probe the effects of plasticity. The framework developed here is applicable to a large class of physical systems including electronic Wigner crystals, multicomponent charge density waves, and ordinary crystals.
△ Less
Submitted 3 November, 2022;
originally announced November 2022.
-
The temperature-dependence of carrier mobility is not a reliable indicator of the dominant scattering mechanism
Authors:
Alex M. Ganose,
Junsoo Park,
Anubhav Jain
Abstract:
The temperature dependence of experimental charge carrier mobility is commonly used as a predictor of the dominant carrier scattering mechanism in semiconductors, particularly in thermoelectric applications. In this work, we critically evaluate whether this practice is well founded. A review of 47 state-of-the-art mobility calculations reveals no correlation between the major scattering mechanism…
▽ More
The temperature dependence of experimental charge carrier mobility is commonly used as a predictor of the dominant carrier scattering mechanism in semiconductors, particularly in thermoelectric applications. In this work, we critically evaluate whether this practice is well founded. A review of 47 state-of-the-art mobility calculations reveals no correlation between the major scattering mechanism and the temperature trend of mobility. Instead, we demonstrate that the phonon frequencies are the prevailing driving forces behind the temperature dependence and can cause it to vary between $T^{-1}$ to $T^{-3}$ even for an idealised material. To demonstrate this, we calculate the mobility of 23,000 materials and review their temperature dependence, including separating the contributions from deformation, polar, and impurity scattering mechanisms. We conclusively demonstrate that a temperature dependence of $T^{-1.5}$ is not a reliable indicator of deformation potential scattering. Our work highlights the potential pitfalls of predicting the major scattering type based on the experimental mobility temperature trend alone.
△ Less
Submitted 4 October, 2022;
originally announced October 2022.
-
Text-mined dataset of gold nanoparticle synthesis procedures, morphologies, and size entities
Authors:
Kevin Cruse,
Amalie Trewartha,
Sanghoon Lee,
Zheren Wang,
Haoyan Huo,
Tanjin He,
Olga Kononova,
Anubhav Jain,
Gerbrand Ceder
Abstract:
Gold nanoparticles are highly desired for a range of technological applications due to their tunable properties, which are dictated by the size and shape of the constituent particles. Many heuristic methods for controlling the morphological characteristics of gold nanoparticles are well known. However, the underlying mechanisms controlling their size and shape remain poorly understood, partly due…
▽ More
Gold nanoparticles are highly desired for a range of technological applications due to their tunable properties, which are dictated by the size and shape of the constituent particles. Many heuristic methods for controlling the morphological characteristics of gold nanoparticles are well known. However, the underlying mechanisms controlling their size and shape remain poorly understood, partly due to the immense range of possible combinations of synthesis parameters. Data-driven methods can offer insight to help guide understanding of these underlying mechanisms, so long as sufficient synthesis data are available. To facilitate data mining in this direction, we have constructed and made publicly available a dataset of codified gold nanoparticle synthesis protocols and outcomes extracted directly from the nanoparticle materials science literature using natural language processing and text-mining techniques. This dataset contains 5,154 data records, each representing a single gold nanoparticle synthesis article, filtered from a database of 4,973,165 publications. Each record contains codified synthesis protocols and extracted morphological information from a total of 7,608 experimental and 12,519 characterization paragraphs.
△ Less
Submitted 21 April, 2022;
originally announced April 2022.
-
Machine-learning rationalization and prediction of solid-state synthesis conditions
Authors:
Haoyan Huo,
Christopher J. Bartel,
Tanjin He,
Amalie Trewartha,
Alexander Dunn,
Bin Ouyang,
Anubhav Jain,
Gerbrand Ceder
Abstract:
There currently exist no quantitative methods to determine the appropriate conditions for solid-state synthesis. This not only hinders the experimental realization of novel materials but also complicates the interpretation and understanding of solid-state reaction mechanisms. Here, we demonstrate a machine-learning approach that predicts synthesis conditions using large solid-state synthesis datas…
▽ More
There currently exist no quantitative methods to determine the appropriate conditions for solid-state synthesis. This not only hinders the experimental realization of novel materials but also complicates the interpretation and understanding of solid-state reaction mechanisms. Here, we demonstrate a machine-learning approach that predicts synthesis conditions using large solid-state synthesis datasets text-mined from scientific journal articles. Using feature importance ranking analysis, we discovered that optimal heating temperatures have strong correlations with the stability of precursor materials quantified using melting points and formation energies ($ΔG_f$, $ΔH_f$). In contrast, features derived from the thermodynamics of synthesis-related reactions did not directly correlate to the chosen heating temperatures. This correlation between optimal solid-state heating temperature and precursor stability extends Tamman's rule from intermetallics to oxide systems, suggesting the importance of reaction kinetics in determining synthesis conditions. Heating times are shown to be strongly correlated with the chosen experimental procedures and instrument setups, which may be indicative of human bias in the dataset. Using these predictive features, we constructed machine-learning models with good performance and general applicability to predict the conditions required to synthesize diverse chemical systems. Codes and data used in this work can be found at: https://github.com/CederGroupHub/s4.
△ Less
Submitted 5 August, 2022; v1 submitted 17 April, 2022;
originally announced April 2022.
-
High-throughput computational discovery of 40 ultralow thermal conductivity and 20 highly anisotropic crystalline materials
Authors:
Ankit Jain,
Harish P Veeravenkata,
Shravan Godse,
Yagyank Srivastava
Abstract:
We performed ab-initio driven density functional theory-based high throughput computations to search for materials with low thermal conductivity and high thermal transport anisotropy. We shortlisted a pool of 429 stable ternary semiconductors from the Materials Project and obtained phonon thermal conductivity by solving the Boltzmann transport equation on 225 materials. We found the lowest thermal…
▽ More
We performed ab-initio driven density functional theory-based high throughput computations to search for materials with low thermal conductivity and high thermal transport anisotropy. We shortlisted a pool of 429 stable ternary semiconductors from the Materials Project and obtained phonon thermal conductivity by solving the Boltzmann transport equation on 225 materials. We found the lowest thermal conductivity of 0.16 W/m-K in SbRbK 2 and 40 materials with a thermal conductivity lower than 1 W/m-K at 300 K. For anisotropic thermal transport, we have identified six materials with anisotropy larger than 5 and 20 with thermal transport anisotropy higher than the largest reported literature value.
△ Less
Submitted 9 April, 2022; v1 submitted 7 April, 2022;
originally announced April 2022.
-
Single-channel or multi-channel thermal transport? Effect of higher-order anharmonic corrections on the predicted phonon thermal transport properties of semiconductors
Authors:
Ankit Jain
Abstract:
The phonon thermal transport properties of eight ternary intermetallic semiconductors are investigated by accounting for higher-order four-phonon scattering, phonon renormalization, and multi-channel thermal transport. The commonly used lowest-order theory, which accounts only for three-phonon scattering and without phonon renormalization, fails drastically for considered materials and underpredic…
▽ More
The phonon thermal transport properties of eight ternary intermetallic semiconductors are investigated by accounting for higher-order four-phonon scattering, phonon renormalization, and multi-channel thermal transport. The commonly used lowest-order theory, which accounts only for three-phonon scattering and without phonon renormalization, fails drastically for considered materials and underpredicts the thermal conductivity by up to a factor of two. The thermal conductivity decreases for three compounds and increases for five compounds with the application of higher-order corrections owing to a contrasting role of four-phonon scattering and phonon stiffening on the predicted thermal conductivity. Using the higher-order theory, at a temperature of 300 K, the lowest obtained thermal conductivity is 0.31 W/m-K for BiCsK2 and three other compounds (SbCsK2, SbRbNa2, and SbRbK2) have thermal conductivities lower than 0.5 W/m-K via the particle-like phonon transport channel. The contribution from the wave-like coherent transport channel is lower than 0.05 W/m-K in all of these ultra-low thermal conductivity compounds. The higher-order theory is a must for the correct description of thermal transport physics, failing which the thermal transport is wrongly characterized as multi-channel transport by the lowest-order theory.
△ Less
Submitted 26 February, 2022;
originally announced February 2022.
-
Observation of anisotropic thermal expansion and Jahn-Teller effect in double perovskites Sr$_{2-x}$La$_x$CoNbO$_6$ using neutron diffraction
Authors:
Ajay Kumar,
Anil Jain,
S. M. Yusuf,
R. S. Dhaka
Abstract:
We use temperature dependent neutron powder diffraction (NPD) to investigate the structural changes and magnetic interactions in double perovskite Sr$_{2-x}$La$_x$CoNbO$_6$ ($x=$ 0.4 and 0.6). A structural phase transition from tetragonal ($I4/m$) to monoclinic ($P2_1/n$) is observed between $x=$ 0.4 and 0.6 samples. Interestingly, temperature evolution of the unit cell parameters follow the Grüne…
▽ More
We use temperature dependent neutron powder diffraction (NPD) to investigate the structural changes and magnetic interactions in double perovskite Sr$_{2-x}$La$_x$CoNbO$_6$ ($x=$ 0.4 and 0.6). A structural phase transition from tetragonal ($I4/m$) to monoclinic ($P2_1/n$) is observed between $x=$ 0.4 and 0.6 samples. Interestingly, temperature evolution of the unit cell parameters follow the Grüneisen approximation, and the analysis suggest the isotropic thermal expansion in case of the $x=$ 0.4 sample, whereas the $x=$ 0.6 sample shows the anisotropy where the thermal expansion along the $c$-axis significantly deviates from the Grüneisen function. We observe the $z$-out Jahn-Teller distortion in the CoO$_6$ and consequently $z$-in distortion in the adjacent NbO$_6$ octahedra. With increase in the La substitution, a decrease in the degree of octahedral distortion is evident from the significant reduction in the local distortion parameter $Δ$ around the B-site atoms.
△ Less
Submitted 21 February, 2022;
originally announced February 2022.
-
Collinear antiferromagnetic order in spin-$\frac52$ triangle lattice antiferromagnet Na$_3$Fe(PO$_4$)$_2$
Authors:
Sebin J. Sebastian,
A. Jain,
S. M. Yusuf,
M. Uhlarz,
R. Nath
Abstract:
We set forth the structural and magnetic properties of the frustrated spin-$5/2$ triangle lattice antiferromagnet Na$_3$Fe(PO$_4$)$_2$ examined via x-ray diffraction, magnetization, heat capacity, and neutron diffraction measurements on the polycrystalline sample. No structural distortion was detected from the temperature-dependant x-ray diffraction down to 12.5 K, except a systematic lattice cont…
▽ More
We set forth the structural and magnetic properties of the frustrated spin-$5/2$ triangle lattice antiferromagnet Na$_3$Fe(PO$_4$)$_2$ examined via x-ray diffraction, magnetization, heat capacity, and neutron diffraction measurements on the polycrystalline sample. No structural distortion was detected from the temperature-dependant x-ray diffraction down to 12.5 K, except a systematic lattice contraction. The magnetic susceptibility at high temperatures agrees well with the high-temperature series expansion for a spin-$5/2$ isotropic triangular lattice antiferromagnet with an average exchange coupling of $J/k_{\rm B} \simeq 1.8$ K rather than a one-dimensional spin-$5/2$ chain model. This value of the exchange coupling is consistently reproduced by the saturation field of the pulse field magnetization data. It undergoes a magnetic long-range-order at $T_{\rm N} \simeq 10.4$ K. Neutron diffraction experiments elucidate a collinear antiferromagnetic ordering below $T_{\rm N}$ with the propagation vector $k = (1,0,0)$. An intermediate value of frustration ratio ($f \simeq 3.6$) reflects moderate frustration in the compound which is corroborated by a reduced ordered magnetic moment of $\sim 1.52$ $μ_{\rm B}$ at 1.6 K, compared to its classical value ($5 μ_{\rm B}$). Magnetic isotherms exhibit a change of slope envisaging a field induced spin-flop transition at $H_{\rm SF}\simeq3.2$ T. The magnetic field vs temperature phase diagram clearly unfold three distinct phase regimes, reminiscent of a frustrated magnet with in-plane (XY-type) anisotropy.
△ Less
Submitted 25 January, 2022;
originally announced January 2022.
-
Approximate symmetries, pseudo-Goldstones, and the second law of thermodynamics
Authors:
Jay Armas,
Akash Jain,
Ruben Lier
Abstract:
We propose a general hydrodynamic framework for systems with spontaneously broken approximate symmetries. The second law of thermodynamics naturally results in relaxation in the hydrodynamic equations, and enables us to derive a universal relation between damping and diffusion of pseudo- Goldstones. We discover entirely new physical effects sensitive to explicitly broken symmetries. We focus on sy…
▽ More
We propose a general hydrodynamic framework for systems with spontaneously broken approximate symmetries. The second law of thermodynamics naturally results in relaxation in the hydrodynamic equations, and enables us to derive a universal relation between damping and diffusion of pseudo- Goldstones. We discover entirely new physical effects sensitive to explicitly broken symmetries. We focus on systems with approximate U(1) and translation symmetries, with direct applications to pinned superfluids and charge density waves. We also comment on the implications for chiral perturbation theory.
△ Less
Submitted 30 March, 2022; v1 submitted 28 December, 2021;
originally announced December 2021.
-
Fractons in curved space
Authors:
Akash Jain,
Kristan Jensen
Abstract:
We consistently couple simple continuum field theories with fracton excitations to curved spacetime backgrounds. We consider homogeneous and isotropic fracton field theories, with a conserved $U(1)$ charge and dipole moment. Coupling to background fields allows us to consistently define a stress-energy tensor for these theories and obtain the respective Ward identities. Along the way, we find evid…
▽ More
We consistently couple simple continuum field theories with fracton excitations to curved spacetime backgrounds. We consider homogeneous and isotropic fracton field theories, with a conserved $U(1)$ charge and dipole moment. Coupling to background fields allows us to consistently define a stress-energy tensor for these theories and obtain the respective Ward identities. Along the way, we find evidence for a mixed gauge-gravitational anomaly in the symmetric tensor gauge theory which naturally couples to conserved dipoles. Our results generalise to systems with arbitrarily higher conserved moments, in particular, a conserved quadrupole moment.
△ Less
Submitted 26 January, 2022; v1 submitted 6 November, 2021;
originally announced November 2021.
-
Recent Advances and Applications of Deep Learning Methods in Materials Science
Authors:
Kamal Choudhary,
Brian DeCost,
Chi Chen,
Anubhav Jain,
Francesca Tavazza,
Ryan Cohn,
Cheol WooPark,
Alok Choudhary,
Ankit Agrawal,
Simon J. L. Billinge,
Elizabeth Holm,
Shyue Ping Ong,
Chris Wolverton
Abstract:
Deep learning (DL) is one of the fastest growing topics in materials data science, with rapidly emerging applications spanning atomistic, image-based, spectral, and textual data modalities. DL allows analysis of unstructured data and automated identification of features. Recent development of large materials databases has fueled the application of DL methods in atomistic prediction in particular.…
▽ More
Deep learning (DL) is one of the fastest growing topics in materials data science, with rapidly emerging applications spanning atomistic, image-based, spectral, and textual data modalities. DL allows analysis of unstructured data and automated identification of features. Recent development of large materials databases has fueled the application of DL methods in atomistic prediction in particular. In contrast, advances in image and spectral data have largely leveraged synthetic data enabled by high quality forward models as well as by generative unsupervised DL methods. In this article, we present a high-level overview of deep-learning methods followed by a detailed discussion of recent developments of deep learning in atomistic simulation, materials imaging, spectral analysis, and natural language processing. For each modality we discuss applications involving both theoretical and experimental data, typical modeling approaches with their strengths and limitations, and relevant publicly available software and datasets. We conclude the review with a discussion of recent cross-cutting work related to uncertainty quantification in this field and a brief perspective on limitations, challenges, and potential growth areas for DL methods in materials science. The application of DL methods in materials science presents an exciting avenue for future materials discovery and design.
△ Less
Submitted 27 October, 2021;
originally announced October 2021.
-
Anharmonic lattice dynamics and thermal transport in type-I inorganic clathrates
Authors:
Shravan Godse,
Yagyank Srivastava,
Ankit Jain
Abstract:
The anharmonic phonon properties of type-I filled inorganic clathrates Ba8 Ga16 Ge30 and Sr8 Ga16 Ge30 are obtained from the first-principles calculations by considering the temperature-dependent sampling of the potential energy surface and quartic phonon renormalization. Owing to the weak binding of guest atoms with the host lattice, the obtained guest modes undergo strong renormalization with te…
▽ More
The anharmonic phonon properties of type-I filled inorganic clathrates Ba8 Ga16 Ge30 and Sr8 Ga16 Ge30 are obtained from the first-principles calculations by considering the temperature-dependent sampling of the potential energy surface and quartic phonon renormalization. Owing to the weak binding of guest atoms with the host lattice, the obtained guest modes undergo strong renormalization with temperature and become stiffer by up to 50% at room temperature in Sr8Ga16Ge30. The calculated phonon frequencies and associated thermal mean squared displacements are comparable with experiments despite the on-centering of guest atoms at cage centers in both clathrates. Lattice thermal conductivities are obtained in the temperature range of 50- 300 K accounting for three-phonon scattering processes and multi-channel thermal transport. The contribution of coherent transport channel is significant at room temperature (13% and 22% in Ba8Ga16Ge30 and Sr8Ga16Ge30) but is insufficient to explain the experimentally observed glass-like thermal transport in Sr8Ga16Ge30.
△ Less
Submitted 25 October, 2021;
originally announced October 2021.
-
Magnetic properties of S = 5/2 anisotropic triangular chain Bi3FeMo2O12
Authors:
K. Boya,
K. Nam,
A. K. Manna,
J. Kang,
C. Lyi,
A. Jain,
S. M. Yusuf,
P. Khuntia,
B. Sana,
V. Kumar,
A. V. Mahajan,
Deepak. R. Patil,
Kee Hoon Kim,
S. K. Panda,
B. Koteswararao
Abstract:
Competing magnetic interactions in low-dimensional quantum magnets can lead to the exotic ground state with fractionalized excitations. Herein, we present our results on an S = 5/2 quasi-one-dimensional spin system Bi3FeMo2O12. The structure of Bi3FeMo2O12 consists of very well separated, infinite zig-zag S = 5/2 spin chains. The observation of a broad maximum around 10 K in the magnetic susceptib…
▽ More
Competing magnetic interactions in low-dimensional quantum magnets can lead to the exotic ground state with fractionalized excitations. Herein, we present our results on an S = 5/2 quasi-one-dimensional spin system Bi3FeMo2O12. The structure of Bi3FeMo2O12 consists of very well separated, infinite zig-zag S = 5/2 spin chains. The observation of a broad maximum around 10 K in the magnetic susceptibility suggests the presence of short-range spin correlations. Magnetic susceptibility data do not fit to S=5/2 uniform spin chain model due to the presence of 2nd nearest-neighbor coupling (J2) along with the 1st nearest-neighbor coupling J1 of the zig-zag chain. The electronic structure calculations infer that the value of J1 is comparable with J2 (J2/J1~1.1) with a negligible inter-chain interaction (J'/J ~ 0.01), implying that Bi3FeMo2O12 is a highly frustrated triangular chain system. The absence of magnetic long-range ordering down to 0.2 K is seen in the heat capacity data, despite a relatively large antiferromagnetic Curie-Weiss temperature of -40 K. The magnetic heat capacity follows nearly a linear behavior at low temperatures indicating that the S = 5/2 anisotropic triangular chain exhibits the gapless excitations.
△ Less
Submitted 23 October, 2021;
originally announced October 2021.
-
Density functional theory driven phononic thermal conductivity prediction of biphenylene: A comparison with graphene
Authors:
Harish P. Veeravenkata,
Ankit Jain
Abstract:
The thermal transport properties of biphenylene network (BPN), a novel sp2 -hybridized two-dimensional allotrope of carbon atoms recently realized in experiments [Fan et al., Science, 372 852-856 (2021)], are studied using the density functional theory-driven solution of the Boltzmann transport equation. The thermal transport in BPN is anisotropic and the obtained thermal conductivities are more t…
▽ More
The thermal transport properties of biphenylene network (BPN), a novel sp2 -hybridized two-dimensional allotrope of carbon atoms recently realized in experiments [Fan et al., Science, 372 852-856 (2021)], are studied using the density functional theory-driven solution of the Boltzmann transport equation. The thermal transport in BPN is anisotropic and the obtained thermal conductivities are more than an order of magnitude lower than that in graphene, despite similar sp2-hybridized planar-structure of both allotropes. The lower thermal conductivity in BPN is found to originate from enhanced anharmonicity which in turn is a result of reduced crystal symmetry of BPN.
△ Less
Submitted 7 June, 2021;
originally announced June 2021.
-
Formation of tungsten carbide by focused ion beam process: A route to high magnetic field resilient patterned superconducting nanostructures
Authors:
Himadri Chakraborti,
Bhanu P Joshi,
Chanchal K. Barman,
Aditya K. Jain,
Buddhadeb Pal,
Bikash C. Barik,
Tanmay Maiti,
Rüdiger Schott,
M. J. N. V. Prasad,
S. Dhar,
Hridis K. Pal,
Aftab Alam,
K. Das Gupta
Abstract:
A scale for magnetic field resilience of a superconductor is set by the paramagnetic limit. Comparing the condensation energy of the Bardeen-Cooper-Schrieffer (BCS) singlet ground state with the paramagnetically polarised state suggests that for an applied field ${μ_0}H > 1.8~T_c$ (in SI), singlet pairing is not energetically favourable. Materials exceeding or approaching this limit are interestin…
▽ More
A scale for magnetic field resilience of a superconductor is set by the paramagnetic limit. Comparing the condensation energy of the Bardeen-Cooper-Schrieffer (BCS) singlet ground state with the paramagnetically polarised state suggests that for an applied field ${μ_0}H > 1.8~T_c$ (in SI), singlet pairing is not energetically favourable. Materials exceeding or approaching this limit are interesting from fundamental and technological perspectives. This may be a potential indicator of triplet superconductivity, Fulde-Ferrell-Larkin-Ovchinnikov (FFLO) pairing and other mechanisms involving topological aspects of surface states, and also allow Cooper pair injection at high magnetic fields. We have analysed the microscopic composition of such a material arising from an unexpected source. A microjet of an organo-metallic gas, $\rm {W[(CO)_6]}$ can be decomposed by gallium ion-beam, leaving behind a track of complex residue of gallium, tungsten and carbon with remarkable superconducting properties, like an upper critical field, $H_{c2} > 10~{\rm T} $, above its paramagnetic limit. We carried out Atomic probe tomography to establish the formation of nano-crystalline tungsten carbide (WC) in the tracks and the absence of free tungsten. Supporting calculations show for Ga distributed on the surface of WC, its s,p-orbitals enhance the density of states near the Fermi energy. The observed variation of $H_{c2}(T)$ does not show features typical of enhancement of critical field due to granularity. Our observations may be significant in the context of some recent theoretical calculation of the band structure of WC and experimental observation of superconductivity in WC-metal interface.
△ Less
Submitted 30 March, 2022; v1 submitted 17 March, 2021;
originally announced March 2021.
-
Comparison of the Tetrahedron Method to Smearing Methods for the Electronic Density of States
Authors:
M. Y. Toriyama,
A. M. Ganose,
M. Dylla,
S. Anand,
J. Park,
M. K. Brod,
J. Munro,
K. A. Persson,
A. Jain,
G. J. Snyder
Abstract:
The electronic density of states (DOS) highlights fundamental properties of materials that oftentimes dictate their properties, such as the band gap and Van Hove singularities. In this short note, we discuss how sharp features of the density of states can be obscured by smearing methods (such as the Gaussian and Fermi smearing methods) when calculating the DOS. While the common approach to reach a…
▽ More
The electronic density of states (DOS) highlights fundamental properties of materials that oftentimes dictate their properties, such as the band gap and Van Hove singularities. In this short note, we discuss how sharp features of the density of states can be obscured by smearing methods (such as the Gaussian and Fermi smearing methods) when calculating the DOS. While the common approach to reach a "converged" density of states of a material is to increase the discrete k-point mesh density, we show that the DOS calculated by smearing methods can appear to converge but not to the correct DOS. Employing the tetrahedron method for Brillouin zone integration resolves key features of the density of states far better than smearing methods.
△ Less
Submitted 4 March, 2021;
originally announced March 2021.
-
When Band Convergence is Not Beneficial for Thermoelectrics
Authors:
Junsoo Park,
Max Dylla,
Yi Xia,
Max Wood,
G. Jeffrey Snyder,
Anubhav Jain
Abstract:
Band convergence is considered a clear benefit to thermoelectric performance because it increases the charge carrier concentration for a given Fermi level, which typically enhances charge conductivity while preserving the Seebeck coefficient. However, this advantage hinges on the assumption that interband scattering of carriers is weak or insignificant. With first-principles treatment of electron-…
▽ More
Band convergence is considered a clear benefit to thermoelectric performance because it increases the charge carrier concentration for a given Fermi level, which typically enhances charge conductivity while preserving the Seebeck coefficient. However, this advantage hinges on the assumption that interband scattering of carriers is weak or insignificant. With first-principles treatment of electron-phonon scattering in CaMg$_{2}$Sb$_{2}$-CaZn$_{2}$Sb$_{2}$ Zintl system and full Heusler Sr$_{2}$SbAu, we demonstrate that the benefit of band convergence can be intrinsically negated by interband scattering depending on the manner in which bands converge. In the Zintl alloy, band convergence does not improve weighted mobility or the density-of-states effective mass. We trace the underlying reason to the fact that the bands converge at one k-point, which induces strong interband scattering of both the deformation-potential and the polar-optical kinds. The case contrasts with band convergence at distant k-points (as in the full Heusler), which better preserves the single-band scattering behavior thereby successfully leading to improved performance. Therefore, we suggest that band convergence as thermoelectric design principle is best suited to cases in which it occurs at distant k-points.
△ Less
Submitted 26 May, 2021; v1 submitted 3 December, 2020;
originally announced December 2020.
-
Hydrodynamic effective field theory and the analyticity of hydrostatic correlators
Authors:
Akash Jain,
Pavel Kovtun,
Adam Ritz,
Ashish Shukla
Abstract:
We study one-loop corrections to retarded and symmetric hydrostatic correlation functions within the Schwinger-Keldysh effective field theory framework for relativistic hydrodynamics, focusing on charge diffusion. We first consider the simplified setup with only diffusive charge density fluctuations, and then augment it with momentum fluctuations in a model where the sound modes can be ignored. We…
▽ More
We study one-loop corrections to retarded and symmetric hydrostatic correlation functions within the Schwinger-Keldysh effective field theory framework for relativistic hydrodynamics, focusing on charge diffusion. We first consider the simplified setup with only diffusive charge density fluctuations, and then augment it with momentum fluctuations in a model where the sound modes can be ignored. We show that the loop corrections, which generically induce non-analyticities and long-range effects at finite frequency, non-trivially preserve analyticity of retarded correlation functions in spatial momentum due to the KMS constraint, as a manifestation of thermal screening. For the purposes of this analysis, we develop an interacting field theory for diffusive hydrodynamics, seen as a limit of relativistic hydrodynamics in the absence of temperature and longitudinal velocity fluctuations.
△ Less
Submitted 24 February, 2021; v1 submitted 6 November, 2020;
originally announced November 2020.
-
Effective field theory for hydrodynamics without boosts
Authors:
Jay Armas,
Akash Jain
Abstract:
We formulate the Schwinger-Keldysh effective field theory of hydrodynamics without boost symmetry. This includes a spacetime covariant formulation of classical hydrodynamics without boosts with an additional conserved particle/charge current coupled to Aristotelian background sources. We find that, up to first order in derivatives, the theory is characterised by the thermodynamic equation of state…
▽ More
We formulate the Schwinger-Keldysh effective field theory of hydrodynamics without boost symmetry. This includes a spacetime covariant formulation of classical hydrodynamics without boosts with an additional conserved particle/charge current coupled to Aristotelian background sources. We find that, up to first order in derivatives, the theory is characterised by the thermodynamic equation of state and a total of 29 independent transport coefficients, in particular, 3 hydrostatic, 9 non-hydrostatic non-dissipative, and 17 dissipative. Furthermore, we study the spectrum of linearised fluctuations around anisotropic equilibrium states with non-vanishing fluid velocity. This analysis reveals a pair of sound modes that propagate at different speeds along and opposite to the fluid flow, one charge diffusion mode, and two distinct shear modes along and perpendicular to the fluid velocity. We present these results in a new hydrodynamic frame that is linearly stable irrespective of the boost symmetry in place. This provides a unified covariant stable approach for simultaneously treating Lorentzian, Galilean, and Lifshitz fluids within an effective field theory framework and sets the stage for future studies of non-relativistic intertwined patterns of symmetry breaking.
△ Less
Submitted 8 August, 2021; v1 submitted 29 October, 2020;
originally announced October 2020.
-
Optimal Band Structure for Thermoelectrics with Realistic Scattering and Bands
Authors:
Junsoo Park,
Yi Xia,
Vidvuds Ozoliņš,
Anubhav Jain
Abstract:
Understanding how to optimize electronic band structures for thermoelectrics is a topic of long-standing interest in the community. Prior models have been limited to simplified bands and/or scattering models. In this study, we apply more rigorous scattering treatments to more realistic model band structures - upward-parabolic bands that inflect to an inverted parabolic behavior - including cases o…
▽ More
Understanding how to optimize electronic band structures for thermoelectrics is a topic of long-standing interest in the community. Prior models have been limited to simplified bands and/or scattering models. In this study, we apply more rigorous scattering treatments to more realistic model band structures - upward-parabolic bands that inflect to an inverted parabolic behavior - including cases of multiple bands. In contrast to common descriptors (e.g., quality factor and complexity factor), the degree to which multiple pockets improve thermoelectric performance is bounded by interband scattering and the relative shapes of the bands. We establish that extremely anisotropic `flat-and-dispersive' bands, although best-performing in theory, may not represent a promising design strategy in practice. Critically, we determine optimum bandwidth, dependent on temperature and lattice thermal conductivity, from perfect transport cutoffs that can in theory significantly boost $zT$ beyond the values attainable through intrinsic band structures alone. Our analysis should be widely useful as the thermoelectric research community eyes $zT>3$.
△ Less
Submitted 10 February, 2021; v1 submitted 17 October, 2020;
originally announced October 2020.
-
Unconventional superparamagnetic behavior in the modified cubic spinel compound LiNi$_{0.5}$Mn$_{1.5}$O$_{4}$
Authors:
S. S. Islam,
Vikram Singh,
K Somesh,
Prashanta K Mukharjee,
A. Jain,
S. M. Yusuf,
R. Nath
Abstract:
Structural, electronic, and magnetic properties of modified cubic spinel compound LiNi$_{0.5}$Mn$_{1.5}$O$_{4}$ are studied via x-ray diffraction, resistivity, DC and AC magnetization, heat capacity, neutron diffraction, $^7$Li nuclear magnetic resonance, magnetocaloric effect, magnetic relaxation, and magnetic memory effect experiments. We stabilized this compound in a cubic structure with space…
▽ More
Structural, electronic, and magnetic properties of modified cubic spinel compound LiNi$_{0.5}$Mn$_{1.5}$O$_{4}$ are studied via x-ray diffraction, resistivity, DC and AC magnetization, heat capacity, neutron diffraction, $^7$Li nuclear magnetic resonance, magnetocaloric effect, magnetic relaxation, and magnetic memory effect experiments. We stabilized this compound in a cubic structure with space group $P4_{3}32$. It exhibits semiconducting character with an electronic band gap of $Δ/k_{\rm B} \simeq 0.4$ eV. The interaction within each Mn$^{4+}$ and Ni$^{2+}$ sub-lattice and between Mn$^{4+}$ and Ni$^{2+}$ sublattices is found to be ferromagnetic (FM) and antiferromagnetic (AFM), respectively which leads to the onset of a ferrimagnetic transition at $T_{\rm C} \simeq 125$~K. The reduced values of frustration parameter ($f$) and ordered moments reflect magnetic frustration due to competing FM and AFM interactions. From the $^7$Li NMR shift vs susceptibility plot, the average hyperfine coupling between $^7$Li nuclei and Ni$^{2+}$ and Mn$^{4+}$ spins is calculated to be $\sim 672.4$~Oe/$μ_{\rm B}$. A detailed critical behaviour study is done in the vicinity of $T_{\rm C}$ using modified-Arrott plot, Kouvel-Fisher plot, and universal scaling of magnetization isotherms. The estimated critical exponents correspond to the 3D XY universality class. A large magneto-caloric effect is observed with a maximum isothermal change in entropy $ΔS_m \simeq - 11.3$~J/Kg-K and a maximum relative cooling power $RCP \simeq 604$~J/Kg for 9~T magnetic field change. The imaginary part of the AC susceptibility depicts a strong frequency dependent hump at $T=T_{\rm f2}$ well below the blocking temperature $T_{\rm b}\simeq120$~K. The Arrhenius behaviour of frequency dependent $T_{\rm f2}$ and the absence of ZFC memory confirm the existence of superparamagnetism in the ferrimagnetically ordered state.
△ Less
Submitted 15 October, 2020;
originally announced October 2020.
-
Non-universality of hydrodynamics
Authors:
Akash Jain,
Pavel Kovtun
Abstract:
We investigate the effects of stochastic interactions on hydrodynamic correlation functions using the Schwinger-Keldysh effective field theory. We identify new "stochastic transport coefficients" that are invisible in the classical constitutive relations, but nonetheless affect the late-time behaviour of hydrodynamic correlation functions through loop corrections. These results indicate that class…
▽ More
We investigate the effects of stochastic interactions on hydrodynamic correlation functions using the Schwinger-Keldysh effective field theory. We identify new "stochastic transport coefficients" that are invisible in the classical constitutive relations, but nonetheless affect the late-time behaviour of hydrodynamic correlation functions through loop corrections. These results indicate that classical transport coefficients do not provide a universal characterisation of long-distance, late-time correlations even within the framework of fluctuating hydrodynamics.
△ Less
Submitted 2 September, 2020;
originally announced September 2020.
-
Efficient calculation of carrier scattering rates from first principles
Authors:
Alex M. Ganose,
Junsoo Park,
Alireza Faghaninia,
Rachel Woods-Robinson,
Kristin A. Persson,
Anubhav Jain
Abstract:
The electronic transport behaviour of materials determines their suitability for technological applications. We develop an efficient method for calculating carrier scattering rates of solid-state semiconductors and insulators from first principles inputs. The present method extends existing polar and non-polar electron-phonon coupling, ionized impurity, and piezoelectric scattering mechanisms form…
▽ More
The electronic transport behaviour of materials determines their suitability for technological applications. We develop an efficient method for calculating carrier scattering rates of solid-state semiconductors and insulators from first principles inputs. The present method extends existing polar and non-polar electron-phonon coupling, ionized impurity, and piezoelectric scattering mechanisms formulated for isotropic band structures to support highly anisotropic materials. We test the formalism by calculating the electronic transport properties of 16 semiconductors and comparing the results against experimental measurements. The present work is amenable for use in high-throughput computational workflows and enables accurate screening of carrier mobilities, lifetimes, and thermoelectric power.
△ Less
Submitted 22 December, 2020; v1 submitted 21 August, 2020;
originally announced August 2020.