-
Spin filtering with insulating altermagnets
Authors:
Kartik Samanta,
Ding-Fu Shao,
Evgeny Y. Tsymbal
Abstract:
Altermagnetic (AM) materials have recently attracted significant interest due to the non-relativistic momentum-dependent spin splitting of their electronic band structure which may be useful for antiferromagnetic (AFM) spintronics. So far, however, most research studies have been focused on AM metals which can be utilized in spintronic devices, such as AFM tunnel junctions (AFMTJs). At the same ti…
▽ More
Altermagnetic (AM) materials have recently attracted significant interest due to the non-relativistic momentum-dependent spin splitting of their electronic band structure which may be useful for antiferromagnetic (AFM) spintronics. So far, however, most research studies have been focused on AM metals which can be utilized in spintronic devices, such as AFM tunnel junctions (AFMTJs). At the same time, AM insulators have remained largely unexplored in the realm of AFM spintronics. Here, we propose to employ AM insulators (AMIs) as efficient spin-filter materials. By analyzing the complex band structure of rutile-type altermagnets $MF_2$ ($M$ = $Fe, Co, Ni$), we demonstrate that the evanescent states in these AMIs exhibit spin- and momentum-dependent decay rates resulting in a substantial momentum-dependent spin polarization of the tunneling current. Using a model of spin-filter tunneling across a spin-dependent potential barrier, we estimate the TMR effect in spin-filter magnetic tunnel junctions (SF-MTJs) that include two magnetically decoupled $MF_2$ (001) barrier layers. We predict a sizable spin-filter TMR ratio of about 150-170% in SF-MTJs based on AMIs $CoF_2$ and $NiF_2$ if the Fermi energy is tuned to be close to the valence band maximum. Our results demonstrate that AMIs provide a viable alternative to conventional ferromagnetic or ferrimagnetic spin-filter materials, potentially advancing the development of next-generation AFM spintronic devices.
△ Less
Submitted 30 August, 2024;
originally announced September 2024.
-
Two-dimensional non-volatile valley spin valve
Authors:
Kai Huang,
Kartik Samanta,
Ding-Fu Shao,
Evgeny Y. Tsymbal
Abstract:
A spin valve represents a well-established device concept in magnetic memory technologies, whose functionality is determined by electron transmission being controlled by the relative alignment of magnetic moments of the two ferromagnetic layers. Recently, the advent of valleytronics has conceptualized a valley spin valve (VSV) - a device that utilizes the valley degree of freedom and spin-valley l…
▽ More
A spin valve represents a well-established device concept in magnetic memory technologies, whose functionality is determined by electron transmission being controlled by the relative alignment of magnetic moments of the two ferromagnetic layers. Recently, the advent of valleytronics has conceptualized a valley spin valve (VSV) - a device that utilizes the valley degree of freedom and spin-valley locking to achieve a similar valve effect without relying on magnetism. In this study, we propose a non-volatile VSV (n-VSV) based on a two-dimensional (2D) ferroelectric semiconductor where the resistance of the n-VSV is controlled by the ferroelectric domain wall between the two uniformly polarized domains. Focusing on the 1T'' phase of MoS2, which is known to be ferroelectric down to a monolayer and using density functional theory (DFT) combined with the quantum-transport calculations, we demonstrate that switching between the uniformly polarized state and the state with oppositely polarized domains separated by a domain wall results in resistance change of as high as 10^7. This giant VSV effect occurs due to transmission being strongly dependent on matching (mismatching) the valley-dependent spin polarizations in the two domains with the same (opposite) ferroelectric polarization orientations, when the chemical potential of 1T''-MoS2 lies within the spin-split valleys. Our work paves a new route for realizing high-performance nonvolatile valleytronics.
△ Less
Submitted 21 August, 2024;
originally announced August 2024.
-
Magnetic Order and Magneto-Elasticity in the Electronic Excitations of Gd-$i$-MAX
Authors:
Kartik Panda,
Daniel Potashnikov,
Asaf Pesach,
Maxime Barbier,
Anna Eyal,
Thierry Ouisse,
Amit Keren,
Nimrod Bachar
Abstract:
We report the investigation of electronic collective modes in rare-earth-based magnets (Mo$_{2/3}$RE$_{1/3}$)$_2$AlC (also known as RE-$i$-MAX phases), where RE=Gd, Yb, and Dy, using single crystal samples. A detailed investigation of the Raman spectra of Gd-$i$-MAX samples at low temperatures, with a focus on the phonon behavior in relation to the antiferromagnetic (AFM) phase transition at 26 K…
▽ More
We report the investigation of electronic collective modes in rare-earth-based magnets (Mo$_{2/3}$RE$_{1/3}$)$_2$AlC (also known as RE-$i$-MAX phases), where RE=Gd, Yb, and Dy, using single crystal samples. A detailed investigation of the Raman spectra of Gd-$i$-MAX samples at low temperatures, with a focus on the phonon behavior in relation to the antiferromagnetic (AFM) phase transition at 26 K is presented. Significant shifts in the central frequencies of several low-frequency phonon modes were observed below 25 K, correlating with the Néel transition. Integrated Raman intensity measurements indicated a reduction in the electronic background below the AFM transition temperature, suggesting the opening of a magnetic gap. Our analysis showed no new phonon modes. Therefore, we do not see any indication of a Brillouin zone folding of phonon mode to the $Γ$-point in our measurement. However, the hardening of all phonon modes at low temperatures points to a strong spin-phonon coupling effect. Using a temperature-dependent model of phonon frequency, we determined the spin-phonon coupling constant $λ$ to be less than 0.1 cm$^{-1}$ for all frequencies, which is of the same order of magnitude as found in other antiferromagnetic materials such as MnF$_{2}$ and FeF$_{2}$ with $T_N=68~K$ and $T_N=78~K$, respectively, but significantly lower than that of $CuO$ with $T_N=213~K$.
△ Less
Submitted 5 August, 2024;
originally announced August 2024.
-
Ferroelectricity in Hafnia: The Origin of Nanoscale Stabilization
Authors:
Xin Li,
Guodong Ren,
Haidong Lu,
Kartik Samanta,
Amit Kumar Shah,
Pravan Omprakash,
Yu Yun,
Pratyush Buragohain,
Huibo Cao,
Jordan A. Hachtel,
Andrew R. Lupini,
Miaofang Chi,
Evgeny Y. Tsymbal,
Alexei Gruverman,
Rohan Mishra,
Xiaoshan Xu
Abstract:
The discovery of ferroelectricity in hafnia-based materials have boosted the potential of incorporating ferroelectrics in advanced electronics, thanks to their compatibility with silicon technology. However, comprehending why these materials defy the common trend of reduced ferroelectric ordering at the nanoscale, and the mechanism that stabilizes the ferroelectric phase (absent in hafnia phase di…
▽ More
The discovery of ferroelectricity in hafnia-based materials have boosted the potential of incorporating ferroelectrics in advanced electronics, thanks to their compatibility with silicon technology. However, comprehending why these materials defy the common trend of reduced ferroelectric ordering at the nanoscale, and the mechanism that stabilizes the ferroelectric phase (absent in hafnia phase diagram) presents significant challenges to traditional knowledge of ferroelectricity. In this work, we show that the formation of the orthorhombic ferroelectric phase (o-FE, space group Pca21) of the single-crystalline epitaxial films of 10% La-doped HfO2 (LHO) on (111)-oriented yttria stabilized zirconia (YSZ) relies on the stability of the high-pressure orthorhombic antiferroelectric phase (o-AFE, space group Pbca). Our detailed structural characterizations demonstrate that as-grown LHO films represent largely the o-AFE phase being thermodynamically stabilized by the compressive strain. Our Kelvin probe force microscopy studies show, under mechanical poling, the o-AFE phase is converted to the o-FE phase which remains stable under ambient conditions. We find that the orthorhombic phase stability is enhanced in thinner films down to one-unit-cell thickness, a trend that is unknown in any other ferroelectric films. This is due to the vanishing depolarization field of the o-AFE phase and the isomorphic LHO/YSZ interface, supporting strain-enhanced ferroelectricity in the ultrathin films. This results in an unprecedented increase of the Curie temperature up to 850 °C, the highest reported for sub-nanometer-thick ferroelectrics. Overall, our findings opens the way for advanced engineering of hafnia-based materials for ferroelectric applications and heralding a new frontier of high-temperature ferroelectrics at the two-dimensional limit.
△ Less
Submitted 3 August, 2024;
originally announced August 2024.
-
Exotic Nd 4f electron magnetism in Nd2RhSi3
Authors:
E V Sampathkumaran,
Kartik K Iyer,
Sudhindra Rayaprol,
Kalobaran Maiti
Abstract:
The compound, Nd2PdSi3, belonging to R2PdSi3 family (R = rare-earths) has been known to exhibit exotic behavior due to unusual Nd 4f hybridization. Here, we study the electronic properties of Nd2RhSi3 employing ac and dc magnetization, heat-capacity, electrical resistivity and magnetoresistance measurements, as Nd 4f hybridization is expected to be slightly different due to the changes in the 4d e…
▽ More
The compound, Nd2PdSi3, belonging to R2PdSi3 family (R = rare-earths) has been known to exhibit exotic behavior due to unusual Nd 4f hybridization. Here, we study the electronic properties of Nd2RhSi3 employing ac and dc magnetization, heat-capacity, electrical resistivity and magnetoresistance measurements, as Nd 4f hybridization is expected to be slightly different due to the changes in the 4d element. The experimental results establish that, like the Pd analogue, this compound also exhibits ferromagnetic ordering at a rather high temperature of 16.5 K, unlike many other rare-earth members of this family which are antiferromagnetic, with a complex magnetism at further lower temperatures (less than 10 K). There are differences in the measured properties with respect to the Pd analogue, the most important one being the observation of spin-glass features at a temperature significantly higher than the Curie temperature. This is attributed to a gradual evolution of cluster magnetism with decreasing temperature. We infer that the changes in Nd 4f hybridization due to Rh 4d (instead of Pd 4d) plays a role in some fashion for such differences. These properties are attributed to the competing magnetic ground states due to geometrical frustration arising out of triangular arrangement of Nd ions with a bond disorder.
△ Less
Submitted 21 July, 2024;
originally announced July 2024.
-
Exploring Superconductivity in Ba$_{3}$Ir$_{4}$Ge$_{16}$: Experimental and Theoretical Insights
Authors:
A. Bhattacharyya,
D. T. Adroja A. K. Jana,
K. Panda,
P. P. Ferreira,
Y. Zhao,
T. Ying,
H. Hosono,
T. T. Dorini,
L. T. F. Eleno,
P. K. Biswas,
G. Stenning,
R. Tripathi,
Y. Qi
Abstract:
We explore both experimental and theoretical aspects of the superconducting properties in the distinctive layered caged compound, Ba$_{3}$Ir$_{4}$Ge$_{16}$. Our approach integrates muon spin rotation and relaxation ($μ$SR) measurements with magnetization and heat capacity experiments, accompanied by first-principle calculations. The compound's bulk superconductivity is unequivocally established th…
▽ More
We explore both experimental and theoretical aspects of the superconducting properties in the distinctive layered caged compound, Ba$_{3}$Ir$_{4}$Ge$_{16}$. Our approach integrates muon spin rotation and relaxation ($μ$SR) measurements with magnetization and heat capacity experiments, accompanied by first-principle calculations. The compound's bulk superconductivity is unequivocally established through DC magnetization measurements, revealing a critical temperature ($T_\mathrm{C}$) of 5.7 K. A noteworthy characteristic observed in the low-temperature superfluid density is its saturating behavior, aligning with the features typical of conventional Bardeen-Cooper-Schrieffer (BCS) superconductors. The assessment of moderate electron-phonon coupling superconductivity is conducted through transverse field $μ$SR measurements, yielding a superconducting gap to $T_\mathrm{C}$ ratio ($2Δ(0)/k_\mathrm{B}T_\mathrm{C}$) of 4.04, a value corroborated by heat capacity measurements. Crucially, zero field $μ$SR measurements dismiss the possibility of any spontaneous magnetic field emergence below $T_\mathrm{C}$, highlighting the preservation of time-reversal symmetry. Our experimental results are reinforced by first-principles density functional calculations, underscoring the intricate interplay between crystal structure and superconducting order parameter symmetry in polyhedral caged compounds. This comprehensive investigation enhances our understanding of the nuanced relationship between crystal structure and superconductivity in such unique compounds.
△ Less
Submitted 26 June, 2024;
originally announced June 2024.
-
Probing the superconducting gap structure of ScRuSi via $μ$SR and first-principles calculations
Authors:
K. Panda,
A. Bhattacharyya,
P. N. Ferreira,
Rajib Mondal,
A. Thamizhavel,
D. T. Adroja,
C. Heil,
L. T. F. Eleno,
A. D. Hillier
Abstract:
In this study, we present a thorough investigation into the superconducting state of the ruthenium-based ternary equiatomic compound ScRuSi. Our analysis combines experimental techniques, including muon spin rotation/relaxation ($μ$SR) and low-temperature resistivity measurements, with theoretical insights derived from first-principles calculations. The low-temperature resistivity measurements rev…
▽ More
In this study, we present a thorough investigation into the superconducting state of the ruthenium-based ternary equiatomic compound ScRuSi. Our analysis combines experimental techniques, including muon spin rotation/relaxation ($μ$SR) and low-temperature resistivity measurements, with theoretical insights derived from first-principles calculations. The low-temperature resistivity measurements reveal a distinct superconducting phase transition in the orthorhombic structure of ScRuSi at a critical temperature ($T_\text{C}$) of $2.5$ K. Further, the TF-$μ$SR analysis yields a gap-to-critical-temperature ratio of $2Δ/k_\mathrm{B}T_\mathrm{C} = 2.71$, a value consistent with results obtained from previous heat capacity measurements. The temperature dependence of the superconducting normalized depolarization rate is fully described by the isotropic $s$-wave gap model. Additionally, zero-field $μ$SR measurements indicate that the relaxation rate remains nearly identical below and above $T_\text{C}$. This observation strongly suggests the preservation of time-reversal symmetry within the superconducting state. By employing the McMillan-Allen-Dynes equation, we calculate a $T_\text{C}$ of $2.11$ K from first-principles calculations within the density functional theory framework. This calculated value aligns closely with the experimentally determined critical temperature. The coupling between the low-frequency phonon modes and the transition metal d-orbital states play an important role in governing the superconducting pairing in ScRuSi. The combination of experimental and theoretical approaches provides a comprehensive microscopic understanding of the superconducting nature of ScRuSi, offering insights into its critical temperature, pairing symmetry, and the underlying electron-phonon coupling mechanism.
△ Less
Submitted 26 June, 2024;
originally announced June 2024.
-
Symmetry-controlled SrRuO3/SrTiO3/SrRuO3 magnetic tunnel junctions:Spin polarization and its relevance to tunneling magnetoresistance
Authors:
Kartik Samanta,
Evgeny Y. Tsymbal
Abstract:
Magnetic tunnel junctions (MTJs), that consist of two ferromagnetic electrodes separated by an insulating barrier layer, have non-trivial fundamental properties associated with spin-dependent tunneling. Especially interesting are fully crystalline MTJs where spin-dependent tunneling is controlled by the symmetry group of wave vector. In this work, using first-principles quantum-transport calculati…
▽ More
Magnetic tunnel junctions (MTJs), that consist of two ferromagnetic electrodes separated by an insulating barrier layer, have non-trivial fundamental properties associated with spin-dependent tunneling. Especially interesting are fully crystalline MTJs where spin-dependent tunneling is controlled by the symmetry group of wave vector. In this work, using first-principles quantum-transport calculations, we explore spin-dependent tunneling in fully crystalline SrRuO3/SrTiO3/SrRuO3 (001) MTJs and predict tunneling magnetoresistance (TMR) of nearly 3000%. We demonstrate that this giant TMR effect is driven by symmetry matching (mismatching) of the incoming and outcoming Bloch states in the SrRuO3 (001) electrodes and evanescent states in the SrTiO3 (001) barrier. We argue that under the conditions of symmetry-controlled transport, spin polarization, whatever definition is used, is not a relevant measure of spin-dependent tunneling. In the presence of diffuse scattering, however, e.g. due to localized states in the band gap of the tunnel barrier, symmetry matching is no longer valid and TMR in SrRuO3/SrTiO3/SrRuO3 (001) MTJs is strongly reduced. Under these conditions, the spin polarization of the interface transmission function becomes a valid measure of TMR. These results provide an important insight into understanding and optimizing TMR in all-oxide MTJs.
△ Less
Submitted 21 June, 2024;
originally announced June 2024.
-
Emergent Griffiths-phase-like behavior in the ball-milled nanocrystalline Dy4RhAl and its implication
Authors:
Kartik K Iyer,
Kalobaran Maiti,
S. Rayaprol,
B A Chalke,
E. V. Sampathkumaran
Abstract:
We report the results of dc susceptibility and heat capacity measurements on the (ball-milled) nanocrystalline rare-earth (R) ternary compound, crystallizing in Gd4RhIn type, cubic Dy4RhAl compound. The bulk form of this compound has been known to undergo antiferromagnetic ordering at (TN=) 18 K with concomitant cluster spin glass anomalies. The present studies on the nano-form obtained by ball mi…
▽ More
We report the results of dc susceptibility and heat capacity measurements on the (ball-milled) nanocrystalline rare-earth (R) ternary compound, crystallizing in Gd4RhIn type, cubic Dy4RhAl compound. The bulk form of this compound has been known to undergo antiferromagnetic ordering at (TN=) 18 K with concomitant cluster spin glass anomalies. The present studies on the nano-form obtained by ball milling reveal that this antiferromagnetic ordering is suppressed with the reduction of particle size with no feature attributable to a well defined long-range magnetic ordering down to 1.8 K, but showing an inhomogeneous magnetism below 10 K. The point being stressed is that the results show the dominance of a feature around 30 K in the magnetic susceptibility data (well above TN of the bulk form) mimicking Griffiths phase. We infer that surface magnetism dominates before long range magnetic ordering occurs in this material.
△ Less
Submitted 13 April, 2024;
originally announced April 2024.
-
Spin-Phonon interaction in quasi 2D- Cr$_2Te_3$
Authors:
Gurupada Ghorai,
Kalyan Ghosh,
Abhilash Patra,
Prasanjit Samal,
Kartik Senapati,
Pratap K. Sahoo
Abstract:
Spin-phonon interaction plays an important role in 2D magnetic materials and motivates the development of next-generation spin- and charge-dependent microelectronic devices. Understanding the spin-phonon interaction by tuning the growth parameter of single crystal Cr$_2Te_3$, a robust quasi-2D room temperature magnetic material, is crucial for spintronic devices. The synthesis of single crystal 2D…
▽ More
Spin-phonon interaction plays an important role in 2D magnetic materials and motivates the development of next-generation spin- and charge-dependent microelectronic devices. Understanding the spin-phonon interaction by tuning the growth parameter of single crystal Cr$_2Te_3$, a robust quasi-2D room temperature magnetic material, is crucial for spintronic devices. The synthesis of single crystal 2D Cr$_2Te_3$ flakes on a Si substrate from co-deposited thin film by plasma annealing techniques is a significant achievement. The temperature dependence and polarization-resolved Raman spectroscopy with support of density functional theory classified lattice symmetry operations were used to identify the phonon modes to investigate the spin/electron-phonon interactions in Cr$_2Te_3$. The mean-field theory model in single crystal Cr$_2Te_3$ is employed to quantify the spin-phonon interaction and correlate with in-plane and out-of-plane magnetic behavior. The observation of a positive correlation between phonon mode frequency and spin-phonon interaction strength in single crystal Cr$_2Te_3$ can be a potential candidate for spintronic applications.
△ Less
Submitted 7 March, 2024;
originally announced March 2024.
-
Exceptional magnetic anomalies in TbIrIn5
Authors:
Ayusa Aparupa Biswal,
Kartik K. Iyer,
Kalobaran Maiti
Abstract:
We study the single crystal growth and the electronic properties of TbIrIn5. The single crystals of TbIrIn5 were grown using the flux method. The analysis of the x-ray diffraction pattern shows high-quality single crystals formed in a tetragonal crystal structure. A trace of In-flux was also found in the data. Temperature and field-dependent magnetic measurements exhibit strong anisotropy and anti…
▽ More
We study the single crystal growth and the electronic properties of TbIrIn5. The single crystals of TbIrIn5 were grown using the flux method. The analysis of the x-ray diffraction pattern shows high-quality single crystals formed in a tetragonal crystal structure. A trace of In-flux was also found in the data. Temperature and field-dependent magnetic measurements exhibit strong anisotropy and antiferromagnetic ordering with a Neel temperature of 43.2 K. The estimated Tb-moment from the data in the paramagnetic regime is found to be close to its free ion value. Interestingly, a strong diamagnetic behaviour and sharp resistivity drop typical of the superconducting phase is observed below 2.6 K which may have a link to the trace of indium present in the system. Further studies are required to ascertain this finding.
△ Less
Submitted 29 January, 2024;
originally announced January 2024.
-
Sensing magnetic flux of Langmuir-Blodgett films of a molecular magnetic system using superconducting films and nano-SQUID devices
Authors:
Bibekananda Das,
Tapas Senapati,
Malaya K. Sahoo,
Jogendra N. Behera,
Kartik Senapati
Abstract:
We report a study on the response of superconducitng micro-tracks and quantum interference devices (SQUIDs) to a proximal SMM film. As a test case, Langmuir-Blodgett $Mn_{12}$-ac SMM films have been grown on 2 $μ$m wide Nb tracks and Nb nano-SQUIDs to observe the proximity effect of magnetic moment and magnetization tunneling, respectively. The superconducting critical temperature of thin Nb track…
▽ More
We report a study on the response of superconducitng micro-tracks and quantum interference devices (SQUIDs) to a proximal SMM film. As a test case, Langmuir-Blodgett $Mn_{12}$-ac SMM films have been grown on 2 $μ$m wide Nb tracks and Nb nano-SQUIDs to observe the proximity effect of magnetic moment and magnetization tunneling, respectively. The superconducting critical temperature of thin Nb tracks (thinner than the coherence length of Nb) were found to decrease by the magnetic moment of $Mn_{12}$-ac SMM. Following the thermally activated flux flow (TAFF) model, we found an increase in the vortex unbinding energy of the SMM coated Nb tracks, near critical temperature. More importantly, the random alignment of moments of the $Mn_{12}$-ac molecules at low fields seemed to have the enhancing effect on vortex unbinding energy rather than the saturated state of $Mn_{12}$-ac molecules at high fields. In the fully superconducting state, on the other hand, the vortex pinning effects were found to be more effective in the saturated state of the $Mn_{12}$-ac molecules, as seen from magnetoresistance and field dependent critical current measurements. In a separate experiment, a Langmuir-Blodgett film of SMM was grown on a nano-SQUID to look for local changes in magnetization arising from magnetizatin tunnelling phenomenon in SMMs. Upon magnetizing the SMM (deposited on SQUIDs) at 2 K along the plane of the film and allowing it to relax, we found occasional jumps in the underlying SQUID voltage, unlike bare nano-SQUIDs, which did not show any such jumps over several hours. Therefore, we believe that the jumps in the SQUID voltage are the signatures of random tunneling of magnetization in the SMM layer.
△ Less
Submitted 18 January, 2024; v1 submitted 15 January, 2024;
originally announced January 2024.
-
Resolving non-equilibrium shape variations amongst millions of gold nanoparticles
Authors:
Zhou Shen,
Salah Awel,
Anton Barty,
Richard Bean,
Johan Bielecki,
Martin Bergemann,
Benedikt J. Daurer,
Tomas Ekeberg,
Armando D. Estillore,
Hans Fangohr,
Klaus Giewekemeyer,
Mark S. Hunter,
Mikhail Karnevskiy,
Richard A. Kirian,
Henry Kirkwood,
Yoonhee Kim,
Jayanath Koliyadu,
Holger Lange,
Romain Letrun,
Jannik Lübke,
Abhishek Mall,
Thomas Michelat,
Andrew J. Morgan,
Nils Roth,
Amit K. Samanta
, et al. (14 additional authors not shown)
Abstract:
Nanoparticles, exhibiting functionally relevant structural heterogeneity, are at the forefront of cutting-edge research. Now, high-throughput single-particle imaging (SPI) with x-ray free-electron lasers (XFELs) creates unprecedented opportunities for recovering the shape distributions of millions of particles that exhibit functionally relevant structural heterogeneity. To realize this potential,…
▽ More
Nanoparticles, exhibiting functionally relevant structural heterogeneity, are at the forefront of cutting-edge research. Now, high-throughput single-particle imaging (SPI) with x-ray free-electron lasers (XFELs) creates unprecedented opportunities for recovering the shape distributions of millions of particles that exhibit functionally relevant structural heterogeneity. To realize this potential, three challenges have to be overcome: (1) simultaneous parametrization of structural variability in real and reciprocal spaces; (2) efficiently inferring the latent parameters of each SPI measurement; (3) scaling up comparisons between $10^5$ structural models and $10^6$ XFEL-SPI measurements. Here, we describe how we overcame these three challenges to resolve the non-equilibrium shape distributions within millions of gold nanoparticles imaged at the European XFEL. These shape distributions allowed us to quantify the degree of asymmetry in these particles, discover a relatively stable `shape envelope' amongst nanoparticles, discern finite-size effects related to shape-controlling surfactants, and extrapolate nanoparticles' shapes to their idealized thermodynamic limit. Ultimately, these demonstrations show that XFEL SPI can help transform nanoparticle shape characterization from anecdotally interesting to statistically meaningful.
△ Less
Submitted 9 January, 2024;
originally announced January 2024.
-
Nanoscale X-ray imaging with high spectral sensitivity using fluorescence intensity correlations
Authors:
Tamme Wollweber,
Kartik Ayyer
Abstract:
This paper introduces Spectral Incoherent Diffractive Imaging (SIDI) as a novel method for achieving dark-field imaging of nanostructures with heterogeneous oxidation states. With SIDI, shifts in photoemission profiles can be spatially resolved, enabling the independent imaging of the underlying emitter distributions contributing to each spectral line. In the X-ray domain, this approach offers uni…
▽ More
This paper introduces Spectral Incoherent Diffractive Imaging (SIDI) as a novel method for achieving dark-field imaging of nanostructures with heterogeneous oxidation states. With SIDI, shifts in photoemission profiles can be spatially resolved, enabling the independent imaging of the underlying emitter distributions contributing to each spectral line. In the X-ray domain, this approach offers unique insights beyond the conventional combination of diffraction and X-ray Emission Spectroscopy (XES). When applied at X-ray Free-Electron Lasers (XFELs), SIDI promises to be a versatile tool for investigating a broad range of systems, offering unprecedented opportunities for detailed characterization of heterogeneous nanostructures for catalysis and energy storage, including of their ultrafast dynamics.
△ Less
Submitted 22 December, 2023;
originally announced December 2023.
-
Probing Lithium Ion Transport at Individual Interfaces
Authors:
Kartik Venkatraman,
Yongqiang Cheng,
Alexandra Moy,
Jordan A. Hachtel,
Michael J. Zachman,
Abinash Kumar,
Olivier Delaire,
Jeff Sakamoto,
Miaofang Chi
Abstract:
Ion transport across solid solid interfaces is often slower than through the bulk of a material, impeding the charge and discharge rate of batteries. Designing highly conductive interfaces is challenging due to the need to probe ion conduction at individual interfaces and correlate it with the local structure. In this study, we address this challenge by enabling the simultaneous measurements of lo…
▽ More
Ion transport across solid solid interfaces is often slower than through the bulk of a material, impeding the charge and discharge rate of batteries. Designing highly conductive interfaces is challenging due to the need to probe ion conduction at individual interfaces and correlate it with the local structure. In this study, we address this challenge by enabling the simultaneous measurements of local Li-dominated optical phonons and ion distributions, using high-energy and high-spatial-resolution spectroscopy in a scanning transmission electron microscope (STEM). Further, this method allows for a direct correlation of ion conduction with interfacial structures identified by STEM imaging. By examining diverse individual interfaces of LiCoO2, we reveal the sensitivity of ion conduction to interface atomic-scale structure and chemistry. Our method enables correlative analysis of ion transport behavior, and atomic and band structures, and can serve as a robust experimental approach for identifying interface structures that offer high conductivity and cyclability for batteries.
△ Less
Submitted 10 December, 2023;
originally announced December 2023.
-
Durable, ultrathin, and antifouling polymer brush coating for efficient condensation heat transfer
Authors:
Shuai Li,
Cheuk Wing Edmond Lam,
Matteo Donati,
Kartik Regulagadda,
Emre Yavuz,
Till Pfeiffer,
Panagiotis Sarkiris,
Evangelos Gogolides,
Athanasios Milionis,
Dimos Poulikakos,
Hans-Jürgen Butt,
Michael Kappl
Abstract:
Heat exchangers are made of metals because of their high heat conductivity and mechanical stability. Metal surfaces are inherently hydrophilic, leading to inefficient filmwise condensation. It is still a challenge to coat these metal surfaces with a durable, robust and thin hydrophobic layer, which is required for efficient dropwise condensation. Here, we report the non-structured and ultrathin (~…
▽ More
Heat exchangers are made of metals because of their high heat conductivity and mechanical stability. Metal surfaces are inherently hydrophilic, leading to inefficient filmwise condensation. It is still a challenge to coat these metal surfaces with a durable, robust and thin hydrophobic layer, which is required for efficient dropwise condensation. Here, we report the non-structured and ultrathin (~6 nm) polydimethylsiloxane (PDMS) brushes on copper that sustain high-performing dropwise condensation in high supersaturation. Due to the flexible hydrophobic siloxane polymer chains, the coating has low resistance to drop sliding and excellent chemical stability. The PDMS brushes can sustain dropwise condensation for up to ~8 h during exposure to 111 °C saturated steam flowing at 3 m/s, with a 5-7 times higher heat transfer coefficient compared to filmwise condensation. The surface is self-cleaning and can reduce bacterial attachment by 99%. This low-cost, facile, fluorine-free, and scalable method is suitable for a great variety of condensation heat transfer applications.
△ Less
Submitted 22 November, 2023;
originally announced November 2023.
-
Tunneling magnetoresistance in magnetic tunnel junctions with a single ferromagnetic electrode
Authors:
Kartik Samanta,
Yuan-Yuan Jiang,
Tula R. Paudel,
Ding-Fu Shao,
Evgeny Y. Tsymbal
Abstract:
Magnetic tunnel junctions (MTJs) are key components of spintronic devices, such as magnetic random-access memories. Normally, MTJs consist of two ferromagnetic (FM) electrodes separated by an insulating barrier layer. Their key functional property is tunneling magnetoresistance (TMR) that is a change in MTJ's resistance when magnetization of the two electrodes alters from parallel to antiparallel.…
▽ More
Magnetic tunnel junctions (MTJs) are key components of spintronic devices, such as magnetic random-access memories. Normally, MTJs consist of two ferromagnetic (FM) electrodes separated by an insulating barrier layer. Their key functional property is tunneling magnetoresistance (TMR) that is a change in MTJ's resistance when magnetization of the two electrodes alters from parallel to antiparallel. Here, we demonstrate that TMR can occur in MTJs with a single FM electrode, provided that the counter electrode is an antiferromagnetic (AFM) metal that supports a spin-split band structure and/or a Néel spin current. Using RuO$_{2}$ as a representative example of such antiferromagnet and CrO$_{2}$ as a FM metal, we design all-rutile RuO$_{2}$/TiO$_{2}$/CrO$_{2}$ MTJs to reveal a non-vanishing TMR. Our first-principles calculations predict that magnetization reversal in CrO$_{2}$ significantly changes conductance of the MTJs stacked in the (110) or (001) planes. The predicted giant TMR effect of about 1000% in the (110) oriented MTJs stems from spin-dependent conduction channels in CrO$_{2}$ (110) and RuO$_{2}$ (110), whose matching alters with CrO$_{2}$ magnetization orientation, while TMR in the (001) oriented MTJs originates from the Néel spin currents and different effective TiO$_{2}$ barrier thickness for the two magnetic sublattices that can be engineered by the alternating deposition of TiO$_{2}$ and CrO$_{2}$ monolayers. Our results demonstrate a possibility of a sizable TMR in MTJs with a single FM electrode and offer a practical test for using the altermagnet RuO$_{2}$ in functional spintronic devices.
△ Less
Submitted 3 October, 2023;
originally announced October 2023.
-
High-$β$ lasing in photonic-defect semiconductor-dielectric hybrid microresonators with embedded InGaAs quantum dots
Authors:
Kartik Gaur,
Ching-Wen Shih,
Imad Limame,
Aris Koulas-Simos,
Niels Heermeier,
Chirag C. Palekar,
Sarthak Tripathi,
Sven Rodt,
Stephan Reitzenstein
Abstract:
We report an easy-to-fabricate microcavity design to produce optically pumped high-$β$ quantum dot microlasers. Our cavity concept is based on a buried photonic-defect for tight lateral mode confinement in a quasi-planar microcavity system, which includes an upper dielectric distributed Bragg reflector (DBR) as a promising alternative to conventional III-V semiconductor DBRs. Through the integrati…
▽ More
We report an easy-to-fabricate microcavity design to produce optically pumped high-$β$ quantum dot microlasers. Our cavity concept is based on a buried photonic-defect for tight lateral mode confinement in a quasi-planar microcavity system, which includes an upper dielectric distributed Bragg reflector (DBR) as a promising alternative to conventional III-V semiconductor DBRs. Through the integration of a photonic-defect, we achieve low mode volumes as low as 0.28 $μ$m$^3$, leading to enhanced light-matter interaction, without the additional need for complex lateral nanoprocessing of micropillars. We fabricate semiconductor-dielectric hybrid microcavities, consisting of Al$_{0.9}$Ga$_{0.1}$As/GaAs bottom DBR with 33.5 mirror pairs, dielectric SiO$_{2}$/SiN$_x$ top DBR with 5, 10, 15, and 19 mirror pairs, and photonic-defects with varying lateral size in the range of 1.5 $μ$m to 2.5 $μ$m incorporated into a one-$λ/n$ GaAs cavity with InGaAs quantum dots as active medium. The cavities show distinct emission features with a characteristic photonic defect size-dependent mode separation and \emph{Q}-factors up to 17000 for 19 upper mirror pairs in excellent agreement with numeric simulations. Comprehensive investigations further reveal lasing operation with a systematic increase (decrease) of the $β$-factor (threshold pump power) with the number of mirror pairs in the upper dielectric DBR. Notably, due to the quasi-planar device geometry, the microlasers show high temperature stability, evidenced by the absence of temperature-induced red-shift of emission energy and linewidth broadening typically observed for nano- and microlasers at high excitation powers.
△ Less
Submitted 19 September, 2023;
originally announced September 2023.
-
Emergence of partially disordered antiferromagnetism and isothermal magnetization plateau due to geometrical frustration in a metallic compound, Er2RhSi3
Authors:
Kartik K Iyer,
Kalobaran Maiti,
Sudhindra Rayaprol,
Ram Kumar,
S. Mattepanavar,
S. Dodamani,
E. V. Sampathkumaran
Abstract:
Partially disordered antiferro (PDA) magnetism (in which one of the three magnetic ions in a triangular network remains magnetically disordered), has been known commonly among geometrically frustrated insulating materials. The one-third plateau in isothermal magnetization (M) of such materials has been of great theoretical interest. Here, we report these properties in a AlB2-structure derived meta…
▽ More
Partially disordered antiferro (PDA) magnetism (in which one of the three magnetic ions in a triangular network remains magnetically disordered), has been known commonly among geometrically frustrated insulating materials. The one-third plateau in isothermal magnetization (M) of such materials has been of great theoretical interest. Here, we report these properties in a AlB2-structure derived metallic material, Er2RhSi3 in which Er sublattice has triangular networks. The presence of a well-defined lamda anomaly in the temperature (T) dependence of heat capacity and its magnetic-field (H) dependence, and the loss of spin-disorder contribution in electrical resistivity (rho) confirm antiferromagnetic order below (TN=) 5 K. On the other hand, the separation of zero-field-cooled and field-cooled dc magnetic susceptibility (chi) curves, decay of isothermal remnant magnetization and the frequency dependence of real and imaginary components of ac chi suggest the onset of spin-glass freezing concomitant with the antiferromagnetic order. In addition, interestingly, we observe one-third plateau in M(H) below 20 kOe for T less than TN. The change in rho as a function of H at a given temperature well below TN is also revealing, with this compound exhibiting a plateau below 20 kOe, with complexities at higher fields. Therefore, this compound serves as a prototype for theoretical understanding of transport behavior across one-third plateau due to PDA magnetism in a metal without any interference from the 4f delocalization phenomena.
△ Less
Submitted 15 September, 2023;
originally announced September 2023.
-
Landscape-Sketch-Step: An AI/ML-Based Metaheuristic for Surrogate Optimization Problems
Authors:
Rafael Monteiro,
Kartik Sau
Abstract:
In this paper, we introduce a new heuristics for global optimization in scenarios where extensive evaluations of the cost function are expensive, inaccessible, or even prohibitive. The method, which we call Landscape-Sketch-and-Step (LSS), combines Machine Learning, Stochastic Optimization, and Reinforcement Learning techniques, relying on historical information from previously sampled points to m…
▽ More
In this paper, we introduce a new heuristics for global optimization in scenarios where extensive evaluations of the cost function are expensive, inaccessible, or even prohibitive. The method, which we call Landscape-Sketch-and-Step (LSS), combines Machine Learning, Stochastic Optimization, and Reinforcement Learning techniques, relying on historical information from previously sampled points to make judicious choices of parameter values where the cost function should be evaluated at. Unlike optimization by Replica Exchange Monte Carlo methods, the number of evaluations of the cost function required in this approach is comparable to that used by Simulated Annealing, quality that is especially important in contexts like high-throughput computing or high-performance computing tasks, where evaluations are either computationally expensive or take a long time to be performed. The method also differs from standard Surrogate Optimization techniques, for it does not construct a surrogate model that aims at approximating or reconstructing the objective function. We illustrate our method by applying it to low dimensional optimization problems (dimensions 1, 2, 4, and 8) that mimick known difficulties of minimization on rugged energy landscapes often seen in Condensed Matter Physics, where cost functions are rugged and plagued with local minima. When compared to classical Simulated Annealing, the LSS shows an effective acceleration of the optimization process.
△ Less
Submitted 4 October, 2023; v1 submitted 13 September, 2023;
originally announced September 2023.
-
Prediction of Giant Tunneling Magnetoresistance in RuO$_{2}$/TiO$_{2}$/RuO$_{2}$ (110) Antiferromagnetic Tunnel Junctions
Authors:
Yuan-Yuan Jiang,
Zi-An Wang,
Kartik Samanta,
Shu-Hui Zhang,
Rui-Chun Xiao,
W. J. Lu,
Y. P. Sun,
Evgeny Y. Tsymbal,
Ding-Fu Shao
Abstract:
Using first-principles quantum-transport calculations, we investigate spin-dependent electronic and transport properties of antiferromagnetic tunnel junctions (AFMTJs) that consist of (110)-oriented antiferromagnetic (AFM) metal RuO$_{2}$ electrodes and an insulating TiO$_{2}$ tunneling barrier. We predict the emergence of a giant tunneling magnetoresistance (TMR) effect in a wide energy window, a…
▽ More
Using first-principles quantum-transport calculations, we investigate spin-dependent electronic and transport properties of antiferromagnetic tunnel junctions (AFMTJs) that consist of (110)-oriented antiferromagnetic (AFM) metal RuO$_{2}$ electrodes and an insulating TiO$_{2}$ tunneling barrier. We predict the emergence of a giant tunneling magnetoresistance (TMR) effect in a wide energy window, a series of barrier layer thicknesses, and different interface terminations, indicating the robustness of this effect. We show that the predicted TMR cannot be explained in terms of the global transport spin-polarization of RuO$_{2}$ (110) but is well understood based on matching the momentum-dependent spin-polarized conduction channels of the two RuO$_{2}$ (110) electrodes. We predict oscillations of TMR with increasing barrier thickness, indicating a non-negligible contribution from the perfectly epitaxial interfaces. Our work helps the understanding of the physics of TMR in AFMTJs and aids in realizing efficient AFM spintronic devices.
△ Less
Submitted 8 November, 2023; v1 submitted 5 September, 2023;
originally announced September 2023.
-
Unconventional quantum criticality in a non-Hermitian extended Kitaev chain
Authors:
S Rahul,
Nilanjan Roy,
Ranjith R Kumar,
Y R Kartik,
Sujit Sarkar
Abstract:
We investigate the nature of quantum criticality and topological phase transitions near the critical lines obtained for the extended Kitaev chain with next nearest neighbor hopping parameters and non-Hermitian chemical potential. We surprisingly find multiple gap-less points, the locations of which in the momentum space can change along the critical line unlike the Hermitian counterpart. The inter…
▽ More
We investigate the nature of quantum criticality and topological phase transitions near the critical lines obtained for the extended Kitaev chain with next nearest neighbor hopping parameters and non-Hermitian chemical potential. We surprisingly find multiple gap-less points, the locations of which in the momentum space can change along the critical line unlike the Hermitian counterpart. The interesting simultaneous occurrences of vanishing and sign flipping behavior by real and imaginary components, respectively of the lowest excitation is observed near the topological phase transition. Introduction of non- Hermitian factor leads to an isolated critical point instead of a critical line and hence, reduced number of multi-critical points as compared to the Hermitian case. The critical exponents obtained for the multi-critical and critical points show a very distinct behavior from the Hermitian case.
△ Less
Submitted 22 July, 2023;
originally announced July 2023.
-
Bismuth Phase Dependent Growth of Superconducting NiBi3 Nanorods
Authors:
Laxmipriya Nanda,
Bidyadhar Das,
Subhashree Sahoo,
Pratap K. Sahoo,
Kartik Senapati
Abstract:
We report a study on the growth of NiBi3 nanowires and nanorods during the preparation of superconducting NiBi3 films by co-evaporation of Ni and Bi. We find that NiBi3 films grown via co-evaporation of Ni and Bi metals achieve higher transition temperatures (4.4 K) compared even to the single crystal NiBi3. However, in certain parameter space, the film surfaces were spattered with nanoscale featu…
▽ More
We report a study on the growth of NiBi3 nanowires and nanorods during the preparation of superconducting NiBi3 films by co-evaporation of Ni and Bi. We find that NiBi3 films grown via co-evaporation of Ni and Bi metals achieve higher transition temperatures (4.4 K) compared even to the single crystal NiBi3. However, in certain parameter space, the film surfaces were spattered with nanoscale features, such as nanowires and nanorods. Ambient temperature deposition resulted in polycrystalline NiBi3 nanorods which were controllable with the evaporation rate of Bi. Deposition at elevated temperatures promoted the emergence of long single crystalline NiBi3 nanorods. High resolution transmission electron microscopy measurements confirmed the crystalline behaviour of the nanorods. We believe that NiBi3 nanowires form in a process analogous to the well known vapor-liquid-solid process, as we observe an amorphous Bi cap on the nanorods. From glancing angle X-ray diffraction measurements we identify that the presence of trigonal Bi with hexagonal primitive cell in the film promotes the nucleation of nanorods. Electrical transport on a single NiBi3 nanowire shows a superconducting transition of 4.3K.
△ Less
Submitted 21 June, 2023;
originally announced June 2023.
-
Direct-Laser-Written Polymer Nanowire Waveguides for Broadband Single Photon Collection from Epitaxial Quantum Dots into a Gaussian-like Mode
Authors:
Edgar Perez,
Cori Haws,
Marcelo Davanco,
Jindong Song,
Luca Sapienza,
Kartik Srinivasan
Abstract:
Single epitaxial quantum dots (QDs) embedded in nanophotonic geometries are a leading technology for quantum light generation. However, efficiently coupling their emission into a single mode fiber or Gaussian beam often remains challenging. Here, we use direct laser writing (DLW) to address this challenge by fabricating 1 $μ$m diameter polymer nanowires (PNWs) in-contact-with and perpendicular-to…
▽ More
Single epitaxial quantum dots (QDs) embedded in nanophotonic geometries are a leading technology for quantum light generation. However, efficiently coupling their emission into a single mode fiber or Gaussian beam often remains challenging. Here, we use direct laser writing (DLW) to address this challenge by fabricating 1 $μ$m diameter polymer nanowires (PNWs) in-contact-with and perpendicular-to a QD-containing GaAs layer. QD emission is coupled to the PNW's HE$_{11}$ waveguide mode, enhancing collection efficiency into a single-mode fiber. PNW fabrication does not alter the QD device layer, making PNWs well-suited for augmenting preexisting in-plane geometries. We study standalone PNWs and PNWs in conjunction with metallic nanoring devices that have been previously established for increasing extraction of QD emission. We report methods that mitigate standing wave reflections and heat, caused by GaAs's absorption/reflection of the lithography beam, which otherwise prevent PNW fabrication. We observe a factor of $(3.0 \pm 0.7)\times$ improvement in a nanoring system with a PNW compared to the same system without a PNW, in line with numerical results, highlighting the PNW's ability to waveguide QD emission and increase collection efficiency simultaneously. These results demonstrate new DLW functionality in service of quantum emitter photonics that maintains compatibility with existing top-down fabrication approaches.
△ Less
Submitted 26 May, 2023; v1 submitted 10 May, 2023;
originally announced May 2023.
-
Josephson coupling driven magnetoresistance in superconducting NiBi3 nanowires
Authors:
Laxmipriya Nanda,
Bidyadhar Das,
Subhashree Sahoo,
Pratap K Sahoo,
Kartik Senapati
Abstract:
We present results of magnetoresistance (MR) measurements in granular NiBi3 nanowires in the resistive state below the superconducting transition temperature. MR of 100 nm wide nanowires fabricated by focused Ion beam lithography from granular films of NiBi3 with and without magnetic Ni impurity were compared. The nanowire containing high concentration of Ni impurity showed oscillations in MR and…
▽ More
We present results of magnetoresistance (MR) measurements in granular NiBi3 nanowires in the resistive state below the superconducting transition temperature. MR of 100 nm wide nanowires fabricated by focused Ion beam lithography from granular films of NiBi3 with and without magnetic Ni impurity were compared. The nanowire containing high concentration of Ni impurity showed oscillations in MR and also exhibited a negative MR in certain temperature and field range. None of these effects were observed in the nanowire with no Ni impurities. Therefore, we argue that this effect is a result of the random Josephson couplings realized across superconducting NiBi3 grains via magnetic inter grain regions. Such random couplings can cause local fluctuations in the density and sign of supercurrent, which can lead to negative MR and oscillations in MR, as proposed by Kivelson & Spivak [Kivelson et al. Phy. Rev. B. 45, 10490 (1992)].
△ Less
Submitted 1 May, 2023;
originally announced May 2023.
-
Phase biasing of a Josephson junction using Rashba-Edelstein effect
Authors:
Tapas Senapati,
Ashwin Kumar,
Kartik Senapati
Abstract:
Manifestation of orbital coupling of spin degree of freedom in condensed matter systems has opened up a new dimension for the field of spintronics. The most appealing aspect of the spin-orbit coupling is the apparent Magnus force sensed by a spin system which locks the Fermi momentum with electron spin in a fascinating manner. In the current carrying state, the resulting macroscopic spin polarizat…
▽ More
Manifestation of orbital coupling of spin degree of freedom in condensed matter systems has opened up a new dimension for the field of spintronics. The most appealing aspect of the spin-orbit coupling is the apparent Magnus force sensed by a spin system which locks the Fermi momentum with electron spin in a fascinating manner. In the current carrying state, the resulting macroscopic spin polarization becomes directly accessible in the form of spin current or spin density. At a Rashba interface, for example, a charge current shifts the spin-locked Fermi surface, leading to a non-equilibrium spin density at the interface, commonly known as the Rashba-Edelstein effect. Since the Rashba-Edelstein effect is an intrinsically interface property, direct detection of the spin moment is harder to set-up. Here we demonstrate that a simple planar Josephson Junction geometry, realized by placing two closely spaced superconducting electrodes on such a Rashba interface, allows a direct estimation of strength of the non-equilibrium spin moment. Measurements of Fraunhofer patterns of Nb-(Pt/Cu)-Nb planar Josephson junctions in a perpendicular magnetic field showed a shift of the center of the Fraunhofer pattern to a non-zero field value. By performing extensive control measurements, we argue that the screening currents in the junction effectively lock the external field with the spin moment of the Rashba-Edelstein effect induced spin-density, leading to the observed shift in the Fraunhofer patterns. This simple experiment offers a fresh perspective on direct detection of spin polarization induced by various spin-orbit effects. Very interestingly, this device platform also offers the possibility of retaining a controllable phase at zero field in the junction without using any magnetic material, and thereby useful as phase batteries for superconducting quantum circuits.
△ Less
Submitted 2 October, 2023; v1 submitted 22 April, 2023;
originally announced April 2023.
-
Magnetic and transport anomalies and large magnetocaloric effect in cubic R4PtAl (R = Ho and Er)
Authors:
Kartik K. Iyer,
Sudhindra Rayaprol,
Ram Kumar,
Shidaling Matteppanavar,
Suneel Dodamani,
Kalobaran Maiti,
Echur V. Sampathkumaran
Abstract:
We report the electronic properties of R4PtAl (R = Ho, and Er), which contains 3 sites for R, by the measurements of magnetization (ac and dc), heat-capacity, transport, and magnetoresistance (MR). Dc magnetization data reveal antiferromagnetic order below 19 K and 12 K in Ho and Er compounds, respectively. Additional features observed at lower temperatures (12 K for Ho4PtAl and 5 K for Er4PtAl) a…
▽ More
We report the electronic properties of R4PtAl (R = Ho, and Er), which contains 3 sites for R, by the measurements of magnetization (ac and dc), heat-capacity, transport, and magnetoresistance (MR). Dc magnetization data reveal antiferromagnetic order below 19 K and 12 K in Ho and Er compounds, respectively. Additional features observed at lower temperatures (12 K for Ho4PtAl and 5 K for Er4PtAl) are akin to cluster spin-glass phase. Resistivity data exhibit a weak minimum at a temperature marginally higher than their respective Néel temperature (T_N) which is unusual for such rare-earths with well localized 4f states. Isothermal magnetization and magnetoresistance data well below T_N exhibit signatures of a subtle field-induced magnetic transition for a small magnetic field (less than 10 kOe). Notably, the isothermal entropy change at T_N has the largest peak value within this rare-earth family; for a field change from zero to 50 kOe, the entropy change is about 14.5 J/kg K (Ho4PtAl) and 21.5 J/kg K (Er4PtAl) suggesting a role of anisotropy of 4f orbital in determining this large value. The results provide some clues for the advancement of the field of magnetocaloric effect. The magnetocaloric property of Er4PtAl is nonhysteretic meeting a challenge to find materials with reversible magnetocaloric effect.
△ Less
Submitted 20 April, 2023;
originally announced April 2023.
-
Topological Data Analysis of Ion Migration Mechanism
Authors:
Ryuhei Sato,
Kazuto Akagi,
Shigeyuki Takagi,
Kartik Sau,
Kazuaki Kisu,
Hao Li,
Shin-ichi Orimo
Abstract:
Topological data analysis based on persistent homology has been applied to the molecular dynamics simulation for the fast ion-conducting phase ($α$-phase) of AgI, to show its effectiveness on the ion-migration mechanism analysis.Time-averaged persistence diagrams of $α$-AgI, which quantitatively records the shape and size of the ring structures in the given atomic configurations, clearly showed th…
▽ More
Topological data analysis based on persistent homology has been applied to the molecular dynamics simulation for the fast ion-conducting phase ($α$-phase) of AgI, to show its effectiveness on the ion-migration mechanism analysis.Time-averaged persistence diagrams of $α$-AgI, which quantitatively records the shape and size of the ring structures in the given atomic configurations, clearly showed the emergence of the four-membered rings formed by two Ag and two I ions at high temperatures. They were identified as common structures during the Ag ion migration. The averaged potential energy change due to the deformation of four-membered ring during Ag migration agrees well with the activation energy calculated from the conductivity Arrhenius plot. The concerted motion of two Ag ions via the four-membered ring was also successfully extracted from molecular dynamics simulations by our approach, providing the new insight into the specific mechanism of the concerted motion.
△ Less
Submitted 14 March, 2023;
originally announced March 2023.
-
Time-resolved single-particle x-ray scattering reveals electron-density as coherent plasmonic-nanoparticle-oscillation source
Authors:
D. Hoeing,
R. Salzwedel,
L. Worbs,
Y. Zhuang,
A. K. Samanta,
J. Lübke,
A. Estillore,
K. Dlugolecki,
C. Passow,
B. Erk,
N. Ekanayaje,
D. Ramm,
J. Correa,
C. C. Papadooulou,
A. T. Noor,
F. Schulz,
M. Selig,
A. Knorr,
K. Ayyer,
J. Küpper,
H. Lange
Abstract:
Dynamics of optically-excited plasmonic nanoparticles are presently understood as a series of sequential scattering events, involving thermalization processes after pulsed optical excitation. One important step is the initiation of nanoparticle breathing oscillations. According to established experiments and models, these are caused by the statistical heat transfer from thermalized electrons to th…
▽ More
Dynamics of optically-excited plasmonic nanoparticles are presently understood as a series of sequential scattering events, involving thermalization processes after pulsed optical excitation. One important step is the initiation of nanoparticle breathing oscillations. According to established experiments and models, these are caused by the statistical heat transfer from thermalized electrons to the lattice. An additional contribution by hot electron pressure has to be included to account for phase mismatches that arise from the lack of experimental data on the breathing onset. We used optical transient-absorption spectroscopy and time-resolved single-particle x-ray-diffractive imaging to access the excited electron system and lattice. The time-resolved single-particle imaging data provided structural information directly on the onset of the breathing oscillation and confirmed the need for an additional excitation mechanism to thermal expansion, while the observed phase-dependence of the combined structural and optical data contrasted previous studies. Therefore, we developed a new model that reproduces all our experimental observations without using fit parameters. We identified optically-induced electron density gradients as the main driving source.
△ Less
Submitted 8 March, 2023;
originally announced March 2023.
-
Experimental studies of superconducting gap structure and quantum fluctuations in novel superconductors and heavy fermion compounds
Authors:
K. Panda
Abstract:
Since its discovery more than a century ago, superconductivity has been at the epicentre of condensed matter physics research. The electron phonon coupling in conventional superconductors, which obeys BCS theory, causes an attractive interaction, resulting in a unique isotropic and fixed sign pairing symmetry ground state. Exotic pairing symmetries are hard to come by in this favourable interactio…
▽ More
Since its discovery more than a century ago, superconductivity has been at the epicentre of condensed matter physics research. The electron phonon coupling in conventional superconductors, which obeys BCS theory, causes an attractive interaction, resulting in a unique isotropic and fixed sign pairing symmetry ground state. Exotic pairing symmetries are hard to come by in this favourable interaction. While unconventional superconductivity is still a mystery, the potential for novel and exotic coupling symmetries due to the interplay of structural symmetries and Fermi surface (FS) topology makes it a fascinating research issue. In this thesis, we have investigated the magnetic, transport, and microscopic properties of the conventional superconductors HfIrSi, ZrIrSi, and novel superconductors ThCoC$_{2}$, CeIr$_{3}$, primarily through the use of a variety of complementary experimental techniques such as low temperature resistivity, magnetization, heat capacity, and muon spin rotation and relaxation measurements.
△ Less
Submitted 21 February, 2023;
originally announced February 2023.
-
Colossal reversible barocaloric effects in a plastic crystal mediated by lattice vibrations and ion diffusion
Authors:
Ming Zeng,
Carlos Escorihuela-Sayalero,
Tamio Ikeshoji,
Shigeyuki Takagi,
Sangryun Kim,
Shin-ichi Orimo,
María Barrio,
Josep-Lluís Tamarit,
Pol Lloveras,
Claudio Cazorla,
Kartik Sau
Abstract:
Solid-state methods for cooling and heating promise a more sustainable alternative to current compression cycles of greenhouse gases and inefficient fuel-burning heaters. Barocaloric effects (BCE) driven by hydrostatic pressure ($p$) are especially encouraging in terms of large adiabatic temperature changes ($|ΔT| \sim 10$ K) and colossal isothermal entropy changes ($|ΔS| \sim 100$ JK$^{-1}$kg…
▽ More
Solid-state methods for cooling and heating promise a more sustainable alternative to current compression cycles of greenhouse gases and inefficient fuel-burning heaters. Barocaloric effects (BCE) driven by hydrostatic pressure ($p$) are especially encouraging in terms of large adiabatic temperature changes ($|ΔT| \sim 10$ K) and colossal isothermal entropy changes ($|ΔS| \sim 100$ JK$^{-1}$kg$^{-1}$). However, BCE typically require large pressure shifts due to irreversibility issues, and sizeable $|ΔT|$ and $|ΔS|$ seldom are realized in a same material. Here, we demonstrate the existence of colossal and reversible BCE in LiCB$_{11}$H$_{12}$, a well-known solid electrolyte, near its order-disorder phase transition at $\approx 380$ K. Specifically, for $Δp \approx 0.23$ $(0.10)$ GPa we measured $|ΔS_{\rm rev}| = 280$ $(200)$ JK$^{-1}$kg$^{-1}$ and $|ΔT_{\rm rev}| = 32$ $(10)$ K, which individually rival with state-of-the-art barocaloric shifts obtained under similar pressure conditions. Furthermore, over a wide temperature range, pressure shifts of the order of $0.1$ GPa yield huge reversible barocaloric strengths of $\approx 2$ JK$^{-1}$kg$^{-1}$MPa$^{-1}$. Molecular dynamics simulations were carried out to quantify the role of lattice vibrations, molecular reorientations and ion diffusion on the disclosed colossal BCE. Interestingly, lattice vibrations were found to contribute the most to $|ΔS|$ while the diffusion of lithium ions, despite adding up only slightly to the accompanying entropy change, was crucial in enabling the molecular order-disorder phase transition. Our work expands the knowledge on plastic crystals and should motivate the investigation of BCE in a variety of solid electrolytes displaying ion diffusion and concomitant molecular orientational disorder.
△ Less
Submitted 14 February, 2023;
originally announced February 2023.
-
Large anomalous Hall, Nernst effect and topological phases in the 3d-4d/5d based oxide double perovskites
Authors:
Kartik Samanta,
Jonathan Noky,
Iñigo Robredo,
Juergen Kuebler,
Maia G. Vergniory,
Claudia Felser
Abstract:
Magnetic topological quantum materials are attracting considerable attention owing to their potential technological applications. However, only a small number of these materials have been experimentally realized, thereby giving rise to the need for new stable magnetic topological quantum materials. Magnetism and spin-orbit coupling, two essential ingredients of the oxide materials, lead to various…
▽ More
Magnetic topological quantum materials are attracting considerable attention owing to their potential technological applications. However, only a small number of these materials have been experimentally realized, thereby giving rise to the need for new stable magnetic topological quantum materials. Magnetism and spin-orbit coupling, two essential ingredients of the oxide materials, lead to various topological transport phenomena such as the anomalous Hall and anomalous Nernst effects, which can be significantly enhanced by designing an electronic structure with a large Berry curvature. In that respect, double perovskites with the general formula A$_2$BB'O$_6$ with an alternating ordered arrangement of two transition metal sites, B(3d) and B'(4d/5d), present attractive possibilities as they are robustly stable against oxidation under ambient conditions and versatile. These double perovskites also offer a high energy scale for magnetism as well as strong spin-orbit coupling with a high magnetic ordering temperature. Here, using first-principles density functional theory calculations, we present a comprehensive study of the intrinsic anomalous transport for 3d-4d/5d based cubic and tetragonal stable double perovskite (DP) compounds. A few of the DPs exhibit a very large anomalous Hall effect with a distinct topological band crossing in the vicinity of the Fermi energy. Our results show the importance of symmetries, particularly the mirror planes, as well as the clean topological band crossing near the Fermi energy, which is primarily contributed by the 5d-t$_{2g}$ for large anomalous Hall and Nernst effects.
△ Less
Submitted 21 December, 2022;
originally announced December 2022.
-
Supergravity model of the Haldane-Rezayi fractional quantum Hall state
Authors:
Dung Xuan Nguyen,
Kartik Prabhu,
Ajit C. Balram,
Andrey Gromov
Abstract:
Supersymmetry and supergravity were invented in the 1970s to solve fundamental problems in high-energy physics. Even though neither of these ideas has yet been confirmed in high-energy and cosmology experiments, they have been beneficial in constructing numerous theoretical models, including superstring theory. Despite the absence of supersymmetry in particle physics, it can potentially emerge in…
▽ More
Supersymmetry and supergravity were invented in the 1970s to solve fundamental problems in high-energy physics. Even though neither of these ideas has yet been confirmed in high-energy and cosmology experiments, they have been beneficial in constructing numerous theoretical models, including superstring theory. Despite the absence of supersymmetry in particle physics, it can potentially emerge in exotic phases of strongly correlated condensed matter systems. In this paper, we propose a supergravity model that describes the low-energy physics of the Haldane-Rezayi state, a gapless quantum Hall state that occurs in a half-filled Landau level. We show that the corresponding edge modes of the Haldane-Rezayi state and the Girvin-MacDonald-Platzman algebra appear naturally in the supergravity model. Finally, we substantiate our theoretical findings with numerical exact diagonalization calculations that support the appearance of the emergent graviton and gravitino excitations in the Haldane-Rezayi state.
△ Less
Submitted 9 March, 2023; v1 submitted 1 December, 2022;
originally announced December 2022.
-
Multi-criticality and long-range effects in non-Hermitian topological models
Authors:
Y R Kartik,
Sujit Sarkar
Abstract:
Long-range effects induce some interesting behavior and considered as a gateway to understand the non-local behavior in the quantum systems. Especially, the long-range topological models became a platform for the realization of new quasi-particles, which are believed to be potential candidates for the topological qubits. In this work, we consider non-Hermitian Su-Schriffer-Heeger (SSH) model and d…
▽ More
Long-range effects induce some interesting behavior and considered as a gateway to understand the non-local behavior in the quantum systems. Especially, the long-range topological models became a platform for the realization of new quasi-particles, which are believed to be potential candidates for the topological qubits. In this work, we consider non-Hermitian Su-Schriffer-Heeger (SSH) model and discuss the interplay of non-Hermiticity and long-range effects. We use the approach of momentum space characterization, critical exponents and curvature renormalization group (CRG) method to understand the aspects of interplay. The longer-range (finite neighbors) effect produces higher winding numbers, where we observe a staircase of transitions among the even-even and odd-odd winding numbers which depends on the number of interacting neighbors. Here we also highlight the effect of multi-criticality in the system and show that they belong to a different universality class. The interplay of long-range (infinite neighbors) effect and non-Hermiticity produces fractional topological invariants, and we analyze them from the behavior of pseudo-spin vectors. We also determine the long-range and short-range limit of the model through universality class of critical exponents. Our work mainly showcases that how the study of criticality in topological system is interesting in exploring the interplay of non-Hermiticity and long-range effects.
△ Less
Submitted 10 November, 2022;
originally announced November 2022.
-
Topological phase transition between non-high symmetry critical phases and curvature function renormalization group
Authors:
Ranjith R Kumar,
Y R Kartik,
Sujit Sarkar
Abstract:
The interplay between topology and criticality has been a recent interest of study in condensed matter physics. A unique topological transition between certain critical phases has been observed as a consequence of the edge modes living at criticalities. In this work, we generalize this phenomenon by investigating possible transitions between critical phases which are non-high symmetry (non-HS) in…
▽ More
The interplay between topology and criticality has been a recent interest of study in condensed matter physics. A unique topological transition between certain critical phases has been observed as a consequence of the edge modes living at criticalities. In this work, we generalize this phenomenon by investigating possible transitions between critical phases which are non-high symmetry (non-HS) in nature. We find the triviality and non-triviality of these critical phases in terms of the decay length of the edge modes and also characterize them using the winding numbers. The distinct non-HS critical phases are separated by multicritical points with linear dispersion at which the winding number exhibits the quantized jump, indicating a change in the topology (number of edge modes) at the critical phases. Moreover, we reframe the scaling theory based on the curvature function, i.e. curvature function renormalization group method to efficiently address the non-HS criticalities and multicriticalities. Using this we identify the conventional topological transition between gapped phases through non-HS critical points, and also the unique topological transition between critical phases through multicritical points. The renormalization group flow, critical exponents, and correlation function of Wannier states enable the characterization of non-HS criticalities along with multicriticalities.
△ Less
Submitted 18 August, 2023; v1 submitted 7 November, 2022;
originally announced November 2022.
-
Berry curvature induced anomalous Hall conductivity in magnetic topological oxide double perovskite Sr2FeMoO6
Authors:
Tirthankar Chakraborty,
Kartik Samanta,
Satya N. Guin,
Jonathan Noky,
Iñigo Robredo,
Suchitra Prasad,
Juergen Kuebler,
Chandra Shekhar,
Maia G. Vergniory,
Claudia Felser
Abstract:
Oxide materials exhibit several novel structural, magnetic, and electronic properties. Their stability under ambient conditions, easy synthesis, and high transition temperatures provide such systems with an ideal ground for realizing topological properties and real-life technological applications. However, experimental evidence of topological states in oxide materials is rare. In this study, we ha…
▽ More
Oxide materials exhibit several novel structural, magnetic, and electronic properties. Their stability under ambient conditions, easy synthesis, and high transition temperatures provide such systems with an ideal ground for realizing topological properties and real-life technological applications. However, experimental evidence of topological states in oxide materials is rare. In this study, we have synthesized single crystals of oxide double perovskite Sr2FeMoO6 and revealed its topological nature by investigating its structural, magnetic, and electronic properties. We observed that the system crystallized in the cubic space group Fm-3m, which is a half-metallic ferromagnet. Transport measurements show an anomalous Hall effect, and it is evident that the Hall contribution originates from the Berry curvature. Assuming a shift of the Fermi energy towards the conduction band, the contribution of the anomalous Hall effect is enhanced owing to the presence of a gaped nodal line. This study can be used to explore and realize the topological properties of bulk oxide systems.
△ Less
Submitted 25 August, 2022;
originally announced August 2022.
-
Vector Chirality $κ$ Driven Topological Phase Transition and the Associated Anomalous Hall Conductivity Tuning in a Non-Collinear Antiferromagnet
Authors:
Subhadip Pradhan,
Kartik Samanta,
Kush Saha,
Ashis K. Nandy
Abstract:
Based on the first-principles electronic structure calculations and subsequent symmetry adapted effective low-energy $\textbf{k.p}$ theory, we show the switching of the vector chirality, $κ$, in a noncollinear antiferromagnet (AFM), Mn$_3$Sn, as an unconventional route to topological phase transition from a nodal-ring to a Weyl point semimetal. Specifically, we find that the switching of $κ$ leads…
▽ More
Based on the first-principles electronic structure calculations and subsequent symmetry adapted effective low-energy $\textbf{k.p}$ theory, we show the switching of the vector chirality, $κ$, in a noncollinear antiferromagnet (AFM), Mn$_3$Sn, as an unconventional route to topological phase transition from a nodal-ring to a Weyl point semimetal. Specifically, we find that the switching of $κ$ leads to gaping out an elliptic nodal-ring everywhere at the Fermi-level except for a pair of points on the ring. As a consequence, the topological phase transition switches the anomalous Hall conductivity (AHC) from zero to a giant value. Furthermore, we theoretically demonstrate how the controlled manipulation of the chiral AFM order keeping $κ$ unaltered favors unusual rotation of Weyl-points on the ring. This in turn enables us to tune in-plane components of the AHC by a collective uniform rotations of spins in the AFM unit cell.
△ Less
Submitted 27 September, 2023; v1 submitted 30 June, 2022;
originally announced June 2022.
-
Thermal release tape-assisted semiconductor membrane transfer process for hybrid photonic devices embedding quantum emitters
Authors:
Cori Haws,
Biswarup Guha,
Edgar Perez,
Marcelo Davanco,
Jin Dong Song,
Kartik Srinivasan,
Luca Sapienza
Abstract:
Being able to combine different materials allows taking advantage of different properties and device engineering that cannot be found or exploited within a single material system. In quantum nano-photonics, one might want to increase the device functionalities by, for instance, combining efficient classical and quantum light emission available in III-V semiconductors, low-loss light propagation ac…
▽ More
Being able to combine different materials allows taking advantage of different properties and device engineering that cannot be found or exploited within a single material system. In quantum nano-photonics, one might want to increase the device functionalities by, for instance, combining efficient classical and quantum light emission available in III-V semiconductors, low-loss light propagation accessible in silicon-based materials, fast electro-optical properties of lithium niobate and broadband reflectors and/or buried metallic contacts for local electric field application or electrical injection of emitters. We propose a transfer printing technique based on the removal of arrays of free-standing membranes and their deposition onto a host material using a thermal release adhesive tape-assisted process. This approach is versatile, in that it poses limited restrictions on the transferred and host materials. In particular, we transfer 190 nm-thick GaAs membranes, with dimensions up to about 260$μ$m x 80$μ$m, containing InAs quantum dots, onto a gold substrate. We show that the presence of a back reflector combined with the etching of micro-pillars significantly increases the extraction efficiency of quantum light, reaching photon fluxes, from a single quantum dot line, exceeding 8 x 10$^5$ photons per second, which is four times higher than the highest count rates measured, on the same chip, from emitters outside the pillars. Given the versatility and the ease of the process, this technique opens the path to the realisation of hybrid quantum and nano-photonic devices that can combine virtually any material that can be undercut to realise free-standing membranes that are then transferred onto any host substrate, without specific compatibility issues and/or requirements.
△ Less
Submitted 10 February, 2022;
originally announced February 2022.
-
Broadband, efficient extraction of quantum light by a photonic device comprised of a metallic nano-ring and a gold back reflector
Authors:
Cori Haws,
Edgar Perez,
Marcelo Davanco,
Jin Dong Song,
Kartik Srinivasan,
Luca Sapienza
Abstract:
To implement quantum light sources based on quantum emitters in applications, it is desirable to improve the extraction efficiency of single photons. In particular controlling the directionality and solid angle of the emission are key parameters, for instance, to couple single photons into optical fibers and send the information encoded in quantum light over long distances, for quantum communicati…
▽ More
To implement quantum light sources based on quantum emitters in applications, it is desirable to improve the extraction efficiency of single photons. In particular controlling the directionality and solid angle of the emission are key parameters, for instance, to couple single photons into optical fibers and send the information encoded in quantum light over long distances, for quantum communication applications. In addition, fundamental studies of the radiative behavior of quantum emitters, including studies of coherence and blinking, benefit from such improved photon collection. Quantum dots grown via Stranski-Krastanov technique have shown to be good candidates for bright, coherent, indistinguishable quantum light emission. However, one of the challenges associated with these quantum light sources arises from the fact that the emission wavelengths can vary from one emitter to the other. To this end, broadband light extractors that do not rely on high-quality factor optical cavities would be desirable, so that no tuning between the quantum dot emission wavelength and the resonator used to increase the light extraction is needed. Here, we show that metallic nano-rings combined with gold back reflectors increase the collection efficiency of single photons and we study the statistics of this effect when quantum dots are spatially randomly distributed within the nano-rings. We show an average increase in the brightness of about a factor 7.5, when comparing emitters within and outside the nano-rings in devices with a gold back reflector, we measure count rates exceeding 7 x 10^6 photons per second and single photon purities as high as 85% +/- 1%. These results are important steps towards the realisation of scalable, broadband, easy to fabricate sources of quantum light for quantum communication applications.
△ Less
Submitted 14 December, 2021;
originally announced December 2021.
-
Signatures of topological phase transition on a quantum critical line
Authors:
Ranjith R Kumar,
Nilanjan Roy,
Y R Kartik,
S Rahul,
Sujit Sarkar
Abstract:
Recently topological states of matter have witnessed a new physical phenomenon where both edge modes and gapless bulk coexist at topological quantum criticality. The presence and absence of edge modes on a critical line can lead to an unusual class of topological phase transition between the topological and non-topological critical phases. We explore the existence of this new class of topological…
▽ More
Recently topological states of matter have witnessed a new physical phenomenon where both edge modes and gapless bulk coexist at topological quantum criticality. The presence and absence of edge modes on a critical line can lead to an unusual class of topological phase transition between the topological and non-topological critical phases. We explore the existence of this new class of topological phase transitions in a generic model representing the topological insulators and superconductors and we show that such transition occurs at a multicritical point i.e. at the intersection of two critical lines. To characterize these transitions we reconstruct the theoretical frameworks which include bound state solution of the Dirac equation, winding number, correlation factors and scaling theory of the curvature function to work for the criticality. Critical exponents and scaling laws are discussed to distinguish between the multicritical points which separate the critical phases. Entanglement entropy and its scaling in the real-space provide further insights into the unique transition at criticality revealing the interplay between fixed point and critical point at the multicriticalities.
△ Less
Submitted 11 May, 2023; v1 submitted 5 December, 2021;
originally announced December 2021.
-
Mixed Alkali-Ion Transport and Storage in Atomic-Disordered Honeycomb Layered $\rm NaKNi_2TeO_6$
Authors:
Titus Masese,
Yoshinobu Miyazaki,
Josef Rizell,
Godwill Mbiti Kanyolo,
Chih-Yao Chen,
Hiroki Ubukata,
Keigo Kubota,
Kartik Sau,
Tamio Ikeshoji,
Zhen-Dong Huang,
Kazuki Yoshii,
Teruo Takahashi,
Miyu Ito,
Hiroshi Senoh,
Jinkwang Hwang,
Abbas Alshehabi,
Kazuhiko Matsumoto,
Toshiyuki Matsunaga,
Kotaro Fujii,
Masatomo Yashima,
Masahiro Shikano,
Cédric Tassel,
Hiroshi Kageyama,
Yoshiharu Uchimoto,
Rika Hagiwara
, et al. (1 additional authors not shown)
Abstract:
Honeycomb layered oxides constitute an emerging class of materials that show interesting physicochemical and electrochemical properties. However, the development of these materials is still limited. Here, we report the combined use of alkali atoms ($\rm Na$ and $\rm K$) to produce a mixed alkali honeycomb layered oxide material, namely, $\rm NaKNi_2TeO_6$. Via transmission electron microscopy meas…
▽ More
Honeycomb layered oxides constitute an emerging class of materials that show interesting physicochemical and electrochemical properties. However, the development of these materials is still limited. Here, we report the combined use of alkali atoms ($\rm Na$ and $\rm K$) to produce a mixed alkali honeycomb layered oxide material, namely, $\rm NaKNi_2TeO_6$. Via transmission electron microscopy measurements, we reveal the local atomic structural disorders characterised by aperiodic stacking and incoherency in the alternating arrangement of $\rm Na$ and $\rm K$ atoms. We also investigate the possibility of mixed electrochemical transport and storage of $\rm Na$ and $\rm K$ ions in $\rm NaKNi_2TeO_6$. In particular, we report an average discharge cell voltage of about $4\, \rm V$ and a specific capacity of around $80\, \rm mAh\, g^{-1}$ at low specific currents (i.e., $< 10\, \rm mA\, g^{-1}$) when a $\rm NaKNi_2TeO_6$-based positive electrode is combined with a room-temperature $\rm NaK$ liquid alloy negative electrode using an ionic liquid-based electrolyte solution. These results represent a step towards the use of tailored cathode active materials for dendrite-free electrochemical energy storage systems exploiting room-temperature liquid alkali metal alloy materials.
△ Less
Submitted 12 October, 2021;
originally announced October 2021.
-
Unsupervised learning approaches to characterize heterogeneous samples using X-ray single particle imaging
Authors:
Yulong Zhuang,
Salah Awel,
Anton Barty,
Richard Bean,
Johan Bielecki,
Martin Bergemann,
Benedikt J. Daurer,
Tomas Ekeberg,
Armando D. Estillore,
Hans Fangohr,
Klaus Giewekemeyer,
Mark S. Hunter,
Mikhail Karnevskiy,
Richard A. Kirian,
Henry Kirkwood,
Yoonhee Kim,
Jayanath Koliyadu,
Holger Lange,
Romain Letrun,
Jannik Lübke,
Abhishek Mall,
Thomas Michelat,
Andrew J. Morgan,
Nils Roth,
Amit K. Samanta
, et al. (17 additional authors not shown)
Abstract:
One of the outstanding analytical problems in X-ray single particle imaging (SPI) is the classification of structural heterogeneity, which is especially difficult given the low signal-to-noise ratios of individual patterns and that even identical objects can yield patterns that vary greatly when orientation is taken into consideration. We propose two methods which explicitly account for this orien…
▽ More
One of the outstanding analytical problems in X-ray single particle imaging (SPI) is the classification of structural heterogeneity, which is especially difficult given the low signal-to-noise ratios of individual patterns and that even identical objects can yield patterns that vary greatly when orientation is taken into consideration. We propose two methods which explicitly account for this orientation-induced variation and can robustly determine the structural landscape of a sample ensemble. The first, termed common-line principal component analysis (PCA) provides a rough classification which is essentially parameter-free and can be run automatically on any SPI dataset. The second method, utilizing variation auto-encoders (VAEs) can generate 3D structures of the objects at any point in the structural landscape. We implement both these methods in combination with the noise-tolerant expand-maximize-compress (EMC) algorithm and demonstrate its utility by applying it to an experimental dataset from gold nanoparticles with only a few thousand photons per pattern and recover both discrete structural classes as well as continuous deformations. These developments diverge from previous approaches of extracting reproducible subsets of patterns from a dataset and open up the possibility to move beyond studying homogeneous sample sets and study open questions on topics such as nanocrystal growth and dynamics as well as phase transitions which have not been externally triggered.
△ Less
Submitted 13 September, 2021;
originally announced September 2021.
-
Growth and characterization of high-quality single-crystalline SnTe retaining cubic symmetry down to the lowest temperature studied
Authors:
Ayanesh Maiti,
Ankita Singh,
Kartik K. Iyer,
Arumugam Thamizhavel
Abstract:
SnTe, an archetypical topological crystalline insulator, often shows a transition from a highly symmetric cubic phase to a rhombohedral structure at low temperatures. In order to achieve the highly symmetric cubic phase at low temperatures suitable for quantum behaviour, we have employed the modified Bridgman method to grow a high-quality single-crystalline sample of SnTe. Analysis of the crystal…
▽ More
SnTe, an archetypical topological crystalline insulator, often shows a transition from a highly symmetric cubic phase to a rhombohedral structure at low temperatures. In order to achieve the highly symmetric cubic phase at low temperatures suitable for quantum behaviour, we have employed the modified Bridgman method to grow a high-quality single-crystalline sample of SnTe. Analysis of the crystal structure using Laue diffraction and rocking curve measurements show a very high degree of single crystallinity of the sample. Resistivity and the specific heat data do not show the signature of structural transition down to the lowest temperature studied. The magnetic susceptibility shows diamagnetic behaviour. All these properties manifest the behaviour of a typical bulk semiconductor with conducting surface states as expected in a topological material. Detailed powder x-ray diffraction measurements show cubic structure in the whole temperature range studied.
△ Less
Submitted 17 November, 2021; v1 submitted 3 September, 2021;
originally announced September 2021.
-
Anomalies in the temperature evolution of the Dirac states in a topological crystalline insulator SnTe
Authors:
Ayanesh Maiti,
Ram Prakash Pandeya,
Bahadur Singh,
Kartik K Iyer,
A Thamizhavel,
Kalobaran Maiti
Abstract:
Discovery of topologically protected surface states, believed to be immune to weak disorder and thermal effects, opened up a new avenue to reveal exotic fundamental science and advanced technology. While time-reversal symmetry plays the key role in most such materials, the bulk crystalline symmetries such as mirror symmetry preserve the topological properties of topological crystalline insulators…
▽ More
Discovery of topologically protected surface states, believed to be immune to weak disorder and thermal effects, opened up a new avenue to reveal exotic fundamental science and advanced technology. While time-reversal symmetry plays the key role in most such materials, the bulk crystalline symmetries such as mirror symmetry preserve the topological properties of topological crystalline insulators (TCIs). It is apparent that any structural change may alter the topological properties of TCIs. To investigate this relatively unexplored landscape, we study the temperature evolution of the Dirac fermion states in an archetypical mirror-symmetry protected TCI, SnTe employing high-resolution angle-resolved photoemission spectroscopy and density functional theory studies. Experimental results reveal a perplexing scenario; the bulk bands observed at 22 K move nearer to the Fermi level at 60 K and again shift back to higher binding energies at 120 K. The slope of the surface Dirac bands at 22 K becomes smaller at 60 K and changes back to a larger value at 120 K. Our results from the first-principles calculations suggest that these anomalies can be attributed to the evolution of the hybridization physics with complex structural changes induced by temperature. In addition, we discover drastically reduced intensity of the Dirac states at the Fermi level at high temperatures may be due to complex evolution of anharmonicity, strain, etc. These results address robustness of the topologically protected surface states due to thermal effects and emphasize importance of covalency and anharmonicity in the topological properties of such emerging quantum materials.
△ Less
Submitted 14 July, 2021;
originally announced July 2021.
-
Nonunique Stationary States and Broken Universality in Birth Death Diffusion Processes
Authors:
Kartik Chhajed,
P. K. Mohanty
Abstract:
Systems with absorbing configurations usually lead to a unique stationary probability measure called quasi stationary state (QSS) defined with respect to the survived samples. We show that the birth death diffusion (BBD) processes exhibit universal phases and phase transitions when the birth and death rates depend on the instantaneous particle density and their time scales are exponentially separa…
▽ More
Systems with absorbing configurations usually lead to a unique stationary probability measure called quasi stationary state (QSS) defined with respect to the survived samples. We show that the birth death diffusion (BBD) processes exhibit universal phases and phase transitions when the birth and death rates depend on the instantaneous particle density and their time scales are exponentially separated from the diffusion rates. In absence of birth, these models exhibit non-unique QSSs and lead to an absorbing phase transition (APT) at some critical nonzero death rate; the usual notion of universality is broken as the critical exponents of APT here depend on the initial density distribution.
△ Less
Submitted 28 June, 2021;
originally announced June 2021.
-
Competing magnetic interactions and magnetoresistance anomalies in cubic intermetallic compounds, Gd4RhAl and Tb4RhAl, and enhanced magnetocaloric effect for the Tb case
Authors:
Ram Kumar,
Kartik K Iyer,
P. L. Paulose,
E. V. Sampathkumaran
Abstract:
We report complex magnetic, magnetoresistance (MR) and magnetocaloric properties of Gd4RhAl and Tb4RhAl forming in the Gd4RhIn type cubic structure. Though the synthesis of the compounds was reported long ago, to our knowledge, no attempt was made to investigate the properties of these compounds. The present results of ac and dc magnetization, electrical resistivity and heat-capacity measurements…
▽ More
We report complex magnetic, magnetoresistance (MR) and magnetocaloric properties of Gd4RhAl and Tb4RhAl forming in the Gd4RhIn type cubic structure. Though the synthesis of the compounds was reported long ago, to our knowledge, no attempt was made to investigate the properties of these compounds. The present results of ac and dc magnetization, electrical resistivity and heat-capacity measurements down to 1.8 K establish that these compounds undergo antiferromagnetic order initially, followed by complex spin-glass features with decreasing temperature. These characteristic temperatures are: For Gd case, TN is about 46K and TG is about 21 K, and for Tb, about 32 and 28 K respectively. Additionally, there are field induced magnetic effects, interestingly leading to non-monotonic variations in MR. There is a significant MR over a wide temperature range above TN, similar to the behavior of magnetocaloric effect (MCE) as measured by isothermal entropy change (DeltaS). An intriguing finding we made is that DeltaS at the onset of magnetic order is significantly larger for the Tb compound than that observed for the Gd analogue near its TN. On the basis of this observation in a cubic material, we raise a question whether aspherical nature of the 4f orbital can play a role to enhance MCE under favorable circumstances, a clue that could be useful to find materials for magnetocaloric applications.
△ Less
Submitted 29 April, 2021;
originally announced April 2021.
-
Tailoring the anomalous Hall effect of SrRuO$_3$ thin films by strain: a first principles study
Authors:
Kartik Samanta,
Marjana Ležaić,
Stefan Blügel,
Yuriy Mokrousov
Abstract:
Motivated by the recently observed unconventional Hall effect in ultra-thin films of ferromagnetic SrRuO$_3$ (SRO) we investigate the effect of strain-induced oxygen octahedral distortion in the electronic structure and anomalous Hall response of the SRO ultra-thin films by virtue of density functional theory calculations. Our findings reveal that the ferromagnetic SRO films grown on SrTiO$_3$ (in…
▽ More
Motivated by the recently observed unconventional Hall effect in ultra-thin films of ferromagnetic SrRuO$_3$ (SRO) we investigate the effect of strain-induced oxygen octahedral distortion in the electronic structure and anomalous Hall response of the SRO ultra-thin films by virtue of density functional theory calculations. Our findings reveal that the ferromagnetic SRO films grown on SrTiO$_3$ (in-plane strain of $-$0.47$\%$) have an orthorhombic (both tilting and rotation) distorted structure and with an increasing amount of substrate-induced compressive strain the octahedral tilting angle is found to be suppressed gradually, with SRO films grown on NdGaO$_3$ (in-plane strain of $-$1.7$\%$) stabilized in the tetragonal distorted structure (with zero tilting). Our Berry curvature calculations predict a positive value of the anomalous Hall conductivity of $+$76\,S/cm at $-$1.7$\%$ strain, whereas it is found to be negative ($-$156\,S/cm) at $-$0.47$\%$ strain. We attribute the found behavior of the anomalous Hall effect to the nodal point dynamics in the electronic structure arising in response to tailoring the oxygen octahedral distortion driven by the substrate-induced strain. We also calculate strain-mediated anomalous Hall conductivity as a function of reduced magnetization obtained by scaling down the magnitude of the exchange field inside Ru atoms finding good qualitative agreement with experimental observations, which indicates a strong impact of longitudinal thermal fluctuations of Ru spin moments on the anomalous Hall effect in this system.
△ Less
Submitted 11 January, 2021;
originally announced January 2021.
-
Topological Frequency Combs and Nested Temporal Solitons
Authors:
Sunil Mittal,
Gregory Moille,
Kartik Srinivasan,
Yanne K. Chembo,
Mohammad Hafezi
Abstract:
Recent advances in realizing optical frequency combs using nonlinear parametric processes in integrated photonic resonators have revolutionized on-chip optical clocks, spectroscopy, and multi-channel optical communications. At the same time, the introduction of topological physics in photonic systems has provided a new paradigm to engineer the flow of photons, and thereby, design photonic devices…
▽ More
Recent advances in realizing optical frequency combs using nonlinear parametric processes in integrated photonic resonators have revolutionized on-chip optical clocks, spectroscopy, and multi-channel optical communications. At the same time, the introduction of topological physics in photonic systems has provided a new paradigm to engineer the flow of photons, and thereby, design photonic devices with novel functionalities and inherent robustness against fabrication disorders. Here, we use topological design principles to theoretically propose the generation of optical frequency combs and temporal Kerr solitons in a two-dimensional array of coupled ring resonators that creates a synthetic magnetic field for photons and exhibits topological edge states. We show that these topological edge states constitute a traveling-wave super-ring resonator that leads to the generation of coherent nested optical frequency combs, and self-formation of nested temporal solitons and Turing rolls that are remarkably phase-locked over >40 rings. In the nested soliton regime, our system operates as a pulsed optical frequency comb and achieves a mode efficiency of >50%, an order of magnitude higher than single ring frequency combs that are theoretically limited to only ~5%. Furthermore, we show that the topological nested solitons are robust against defects in the lattice. This topological frequency comb works in a parameter regime that can be readily accessed using existing low loss integrated photonic platforms like silicon-nitride. Our results could pave the way for efficient on-chip optical frequency combs, and investigations of various other soliton solutions in conjunction with synthetic gauge fields and topological phenomena in large arrays of coupled resonators.
△ Less
Submitted 6 January, 2021;
originally announced January 2021.
-
Simultaneous excitation of phonons at the center and boundaries of Brillouin zones with high energy electron beams
Authors:
Kartik Venkatraman,
Peter A. Crozier
Abstract:
High energy electron beams can now be routinely focused to 1-2 Å and offer the ability to obtain vibrational information from materials using monochromated electron energy-loss spectroscopy (EELS) in a scanning transmission electron microscope (STEM). Here it is shown that long and short wavelength phonons can be probed simultaneously with on-axis vibrational STEM EELS. The advantage of using focu…
▽ More
High energy electron beams can now be routinely focused to 1-2 Å and offer the ability to obtain vibrational information from materials using monochromated electron energy-loss spectroscopy (EELS) in a scanning transmission electron microscope (STEM). Here it is shown that long and short wavelength phonons can be probed simultaneously with on-axis vibrational STEM EELS. The advantage of using focused electron beams is that the short wavelength phonons are probed via impact scattering while the long-wavelength modes are probed via dipole scattering. The localized character of the short-wavelength modes is demonstrated by scanning the electron beam across the edge of a hexagonal boron nitride nanoparticle. It is found that the condition required for high spatial resolution STEM imaging also correlates with the condition to enhance the short-wavelength phonon contribution to the vibrational energy-loss spectrum. Probing short-wavelength phonons at high spatial resolution with on-axis vibrational STEM EELS will help develop a fundamental connection between vibrational excitations and bonding arrangements at atomic scale heterogeneities in materials.
△ Less
Submitted 27 October, 2020;
originally announced October 2020.
-
A study of topological characterization and symmetries for a quantum simulated Kitaev chain
Authors:
Y R Kartik,
Ranjith R Kumar,
S Rahul,
Sujit Sarkar
Abstract:
An attempt is made to quantum simulate the topological classification, such as winding number, geometric phase and symmetry properties for a quantum simulated Kitaev chain. We find, α (ratio between the spin-orbit coupling and magnetic field) and the range of momentum space of consideration, which plays a crucial role for the topological classification. We show explicitly that the topological quan…
▽ More
An attempt is made to quantum simulate the topological classification, such as winding number, geometric phase and symmetry properties for a quantum simulated Kitaev chain. We find, α (ratio between the spin-orbit coupling and magnetic field) and the range of momentum space of consideration, which plays a crucial role for the topological classification. We show explicitly that the topological quantum phase transition does not occurs at k = 0 limit for the quantum simulated Kitaev chain. We observe that the quasi-particle mass of the Majorana mode plays the significant role in topological quantum phase transition. We also show that the symmetry properties of simulated Kitaev chain is the same with original Kitaev chain. The exact solution of simulated Kitaev chain is given. This work provides a new perspective on new emerging quantum simulator and also for the topological state of matter.
△ Less
Submitted 10 September, 2020;
originally announced September 2020.