-
Roadmap on Photovoltaic Absorber Materials for Sustainable Energy Conversion
Authors:
James C. Blakesley,
Ruy S. Bonilla,
Marina Freitag,
Alex M. Ganose,
Nicola Gasparini,
Pascal Kaienburg,
George Koutsourakis,
Jonathan D. Major,
Jenny Nelson,
Nakita K. Noel,
Bart Roose,
Jae Sung Yun,
Simon Aliwell,
Pietro P. Altermatt,
Tayebeh Ameri,
Virgil Andrei,
Ardalan Armin,
Diego Bagnis,
Jenny Baker,
Hamish Beath,
Mathieu Bellanger,
Philippe Berrouard,
Jochen Blumberger,
Stuart A. Boden,
Hugo Bronstein
, et al. (61 additional authors not shown)
Abstract:
Photovoltaics (PVs) are a critical technology for curbing growing levels of anthropogenic greenhouse gas emissions, and meeting increases in future demand for low-carbon electricity. In order to fulfil ambitions for net-zero carbon dioxide equivalent (CO<sub>2</sub>eq) emissions worldwide, the global cumulative capacity of solar PVs must increase by an order of magnitude from 0.9 TWp in 2021 to 8.…
▽ More
Photovoltaics (PVs) are a critical technology for curbing growing levels of anthropogenic greenhouse gas emissions, and meeting increases in future demand for low-carbon electricity. In order to fulfil ambitions for net-zero carbon dioxide equivalent (CO<sub>2</sub>eq) emissions worldwide, the global cumulative capacity of solar PVs must increase by an order of magnitude from 0.9 TWp in 2021 to 8.5 TWp by 2050 according to the International Renewable Energy Agency, which is considered to be a highly conservative estimate. In 2020, the Henry Royce Institute brought together the UK PV community to discuss the critical technological and infrastructure challenges that need to be overcome to address the vast challenges in accelerating PV deployment. Herein, we examine the key developments in the global community, especially the progress made in the field since this earlier roadmap, bringing together experts primarily from the UK across the breadth of the photovoltaics community. The focus is both on the challenges in improving the efficiency, stability and levelized cost of electricity of current technologies for utility-scale PVs, as well as the fundamental questions in novel technologies that can have a significant impact on emerging markets, such as indoor PVs, space PVs, and agrivoltaics. We discuss challenges in advanced metrology and computational tools, as well as the growing synergies between PVs and solar fuels, and offer a perspective on the environmental sustainability of the PV industry. Through this roadmap, we emphasize promising pathways forward in both the short- and long-term, and for communities working on technologies across a range of maturity levels to learn from each other.
△ Less
Submitted 30 October, 2023;
originally announced October 2023.
-
Direct experimental evidence for substrate adatom incorporation into a molecular overlayer
Authors:
Philip J. Mousley,
Luke A. Rochford,
Paul T. P. Ryan,
Phil J. Blowey,
James Lawrence,
David A. Duncan,
Hadeel Hussain,
Billal Sohail,
Tien-Lin Lee,
Gavin R. Bell,
Giovanni Costantini,
Reinhard J. Maurer,
Chris Nicklin,
D. Phil Woodruff
Abstract:
While the phenomenon of metal substrate adatom incorporation into molecular overlayers is generally believed to occur in several systems, the experimental evidence for this relies on the interpretation of scanning tunnelling microscopy (STM) images, which can be ambiguous and provides no quantitative structural information. We show that surface X-ray diffraction (SXRD) uniquely provides unambiguou…
▽ More
While the phenomenon of metal substrate adatom incorporation into molecular overlayers is generally believed to occur in several systems, the experimental evidence for this relies on the interpretation of scanning tunnelling microscopy (STM) images, which can be ambiguous and provides no quantitative structural information. We show that surface X-ray diffraction (SXRD) uniquely provides unambiguous identification of these metal adatoms. We present the results of a detailed structural study of the Au(111)-F4TCNQ system, combining surface characterisation by STM, low energy electron diffraction and soft X-ray photoelectron spectroscopy with quantitative experimental structural information from normal incidence X-ray standing waves (NIXSW) and SXRD, together with dispersion corrected density functional theory (DFT) calculations. Excellent agreement is found between the NIXSW data and the DFT calculations regarding the height and conformation of the adsorbed molecule, which has a twisted geometry rather than the previously supposed inverted bowl shape. SXRD measurements provide unequivocal evidence for the presence and location of Au adatoms, while the DFT calculations show this reconstruction to be strongly energetically favoured.
△ Less
Submitted 19 April, 2022; v1 submitted 10 November, 2021;
originally announced November 2021.
-
Spin splitting and strain in epitaxial monolayer WSe$_2$ on graphene
Authors:
H. Nakamura,
A. Mohammed,
P. Rosenzweig,
K. Matsuda,
K. Nowakowski,
K. Küster,
P. Wochner,
S. Ibrahimkutty,
U. Wedig,
H. Hussain,
J. Rawle,
C. Nicklin,
B. Stuhlhofer,
G. Cristiani,
G. Logvenov,
H. Takagi,
U. Starke
Abstract:
We present the electronic and structural properties of monolayer WSe$_{2}$ grown by pulsed-laser deposition on monolayer graphene (MLG) on SiC. The spin splitting in the WSe$_{2}$ valence band at $\overline{\mathrm{K}}$ was $Δ_\mathrm{SO}=0.469\pm0.008$ eV by angle-resolved photoemission spectroscopy (ARPES). Synchrotron-based grazing-incidence in-plane X-ray diffraction (XRD) revealed the in-plan…
▽ More
We present the electronic and structural properties of monolayer WSe$_{2}$ grown by pulsed-laser deposition on monolayer graphene (MLG) on SiC. The spin splitting in the WSe$_{2}$ valence band at $\overline{\mathrm{K}}$ was $Δ_\mathrm{SO}=0.469\pm0.008$ eV by angle-resolved photoemission spectroscopy (ARPES). Synchrotron-based grazing-incidence in-plane X-ray diffraction (XRD) revealed the in-plane lattice constant of monolayer WSe$_{2}$ to be $a_\mathrm{WSe_2}=3.2757\pm0.0008 \mathrm{Å}$. This indicates a lattice compression of -0.19 % from bulk WSe$_{2}$. By using experimentally determined graphene lattice constant ($a_\mathrm{MLG}=2.4575\pm0.0007 \mathrm{Å}$), we found that a 3$\times$3 unit cell of the slightly compressed WSe$_{2}$ is perfectly commensurate with a 4$\times$4 graphene lattice with a mismatch below 0.03 %, which could explain why the monolayer WSe$_{2}$ is compressed on MLG. From XRD and first-principles calculations, however, we conclude that the observed size of strain is negligibly small to account for a discrepancy in $Δ_\mathrm{SO}$ found between exfoliated and epitaxial monolayers in earlier ARPES. In addition, angle-resolved, ultraviolet and X-ray photoelectron spectroscopy shed light on the band alignment between WSe$_{2}$ and MLG/SiC and indicate electron transfer from graphene to the WSe$_{2}$ monolayer. As further revealed by atomic force microscopy, the WSe$_{2}$ island size depends on the number of carbon layers on top of the SiC substrate. This suggests that the epitaxy of WSe$_{2}$ favors the weak van der Waals interactions with graphene while it is perturbed by the influence of the SiC substrate and its carbon buffer layer.
△ Less
Submitted 10 December, 2019;
originally announced December 2019.
-
The Role of Crystal Orientation in the Dissolution of UO$_2$ Thin Films
Authors:
S. Rennie,
E. Lawrence Bright,
J. E. Sutcliffe,
J. E. Darnbrough,
J. Rawle,
C. Nicklin,
G. H. Lander,
R. Springell
Abstract:
Epitaxial thin films have been utilised to investigate the radiolytic dissolution of uranium dioxide interfaces. Thin films of UO$_2$ deposited on single crystal yttria stabilised zirconia substrates have been exposed to water in the presence of a high flux, monochromatic, synchrotron x-ray source. In particular, this technique was applied to induce dissolution of three UO$_2$ thin films, grown al…
▽ More
Epitaxial thin films have been utilised to investigate the radiolytic dissolution of uranium dioxide interfaces. Thin films of UO$_2$ deposited on single crystal yttria stabilised zirconia substrates have been exposed to water in the presence of a high flux, monochromatic, synchrotron x-ray source. In particular, this technique was applied to induce dissolution of three UO$_2$ thin films, grown along the principle UO$_2$ crystallographic orientations: (001), (110) and (111). Dissolution of each film was induced for 9 accumulative corrosion periods, totalling 270s, after which XRR spectra were recorded to observe the change in morphology of the films as a function of exposure time. While the (001) and (110) oriented films were found to corrode almost linearly and at comparable rates, the (111) film was found to be significantly more corrosion resistant, with no loss of UO$_2$ material being observed after the initial 90s corrosion period. These results distinctly show the effect of crystallographic orientation on the rate of x-ray induced UO$_2$ dissolution. This result may have important consequences for theoretical dissolution models, as it is evident that orientation dependence must be taken into consideration to obtain accurate predictions of the dissolution behaviour of UO$_2$.
△ Less
Submitted 31 March, 2018;
originally announced April 2018.
-
Surface structure of Bi2Se3(111) determined by low-energy electron diffraction and surface X-ray diffraction
Authors:
Diogo Duarte dos Reis,
Lucas Barreto,
Marco Bianchi,
Guilherme Almeida Silva Ribeiro,
Edmar Avellar Soares,
Wendell Simoes e Silva,
Vagner Eustaquio de Carvalho,
Jonathan Rawle,
Moritz Hoesch,
Chris Nicklin,
Willians Principe Fernandes,
Jianli Mi,
Bo Brummerstedt Iversen,
Philip Hofmann
Abstract:
The surface structure of the prototypical topological insulator Bi2Se3 is determined by low-energy electron diffraction and surface X-ray diffraction at room temperature. Both approaches show that the crystal is terminated by an intact quintuple layer. Specifically, an alternative termination by a bismuth bilayer is ruled out. Surface relaxations obtained by both techniques are in good agreement w…
▽ More
The surface structure of the prototypical topological insulator Bi2Se3 is determined by low-energy electron diffraction and surface X-ray diffraction at room temperature. Both approaches show that the crystal is terminated by an intact quintuple layer. Specifically, an alternative termination by a bismuth bilayer is ruled out. Surface relaxations obtained by both techniques are in good agreement with each other and found to be small. This includes the relaxation of the van der Waals gap between the first two quintuple layers.
△ Less
Submitted 14 June, 2013;
originally announced June 2013.