-
The Evolution of Applications, Hardware Design, and Channel Modeling for Terahertz (THz) Band Communications and Sensing: Ready for 6G?
Authors:
Josep M. Jornet,
Vitaly Petrov,
Hua Wang,
Zoya Popovic,
Dipankar Shakya,
Jose V. Siles,
Theodore S. Rappaport
Abstract:
For decades, the terahertz (THz) frequency band had been primarily explored in the context of radar, imaging, and spectroscopy, where multi-gigahertz (GHz) and even THz-wide channels and the properties of terahertz photons offered attractive target accuracy, resolution, and classification capabilities. Meanwhile, the exploitation of the terahertz band for wireless communication had originally been…
▽ More
For decades, the terahertz (THz) frequency band had been primarily explored in the context of radar, imaging, and spectroscopy, where multi-gigahertz (GHz) and even THz-wide channels and the properties of terahertz photons offered attractive target accuracy, resolution, and classification capabilities. Meanwhile, the exploitation of the terahertz band for wireless communication had originally been limited due to several reasons, including (i) no immediate need for such high data rates available via terahertz bands and (ii) challenges in designing sufficiently high power terahertz systems at reasonable cost and efficiency, leading to what was often referred to as "the terahertz gap". This roadmap paper first reviews the evolution of the hardware design approaches for terahertz systems, including electronic, photonic, and plasmonic approaches, and the understanding of the terahertz channel itself, in diverse scenarios, ranging from common indoors and outdoors scenarios to intra-body and outer-space environments. The article then summarizes the lessons learned during this multi-decade process and the cutting-edge state-of-the-art findings, including novel methods to quantify power efficiency, which will become more important in making design choices. Finally, the manuscript presents the authors' perspective and insights on how the evolution of terahertz systems design will continue toward enabling efficient terahertz communications and sensing solutions as an integral part of next-generation wireless systems.
△ Less
Submitted 10 June, 2024;
originally announced June 2024.
-
Waste Factor and Waste Figure: A Unified Theory for Modeling and Analyzing Wasted Power in Radio Access Networks for Improved Sustainability
Authors:
Theodore S. Rappaport,
Mingjun Ying,
Nicola Piovesan,
Antonio De Domenico,
Dipankar Shakya
Abstract:
This paper introduces Waste Factor (W), also denoted as Waste Figure (WF) in dB, a promising new metric for quantifying energy efficiency in a wide range of circuits and systems applications, including data centers and RANs. Also, the networks used to connect data centers and AI computing engines with users for ML applications must become more power efficient. This paper illustrates the limitation…
▽ More
This paper introduces Waste Factor (W), also denoted as Waste Figure (WF) in dB, a promising new metric for quantifying energy efficiency in a wide range of circuits and systems applications, including data centers and RANs. Also, the networks used to connect data centers and AI computing engines with users for ML applications must become more power efficient. This paper illustrates the limitations of existing energy efficiency metrics that inadequately capture the intricate energy dynamics of RAN components. We delineate the methodology for applying W across various network configurations, including MISO, SIMO, and MIMO systems, and demonstrate the effectiveness of W in identifying energy optimization opportunities. Our findings reveal that W not only offers nuanced insights into the energy performance of RANs but also facilitates informed decision-making for network design and operational efficiency. Furthermore, we show how W can be integrated with other KPIs to guide the development of optimal strategies for enhancing network energy efficiency under different operational conditions. Additionally, we present simulation results for a distributed multi-user MIMO system at 3.5, 17, and 28 GHz, demonstrating overall network power efficiency on a per square kilometer basis, and show how overall W decreases with an increasing number of base stations and increasing carrier frequency. This paper shows that adopting W as a figure of merit can significantly contribute to the sustainability and energy optimization of next-generation wireless communication networks, paving the way for greener and more sustainable, energy-efficient 5G and 6G technologies.
△ Less
Submitted 17 July, 2024; v1 submitted 13 May, 2024;
originally announced May 2024.
-
Using Waste Factor to Optimize Energy Efficiency in Multiple-Input Single-Output (MISO) and Multiple-Input Multiple-Output (MIMO) Systems
Authors:
Mingjun Ying,
Dipankar Shakya,
Theodore S. Rappaport
Abstract:
This paper introduces Waste Factor (W) and Waste Figure (WF) to assess power efficiency in any multiple-input multiple-output (MIMO) or single-input multiple-output (SIMO) or multiple-input single-output (MISO) cascaded communication system. This paper builds upon the new theory of Waste Factor, which systematically models added wasted power in any cascade for parallel systems such as MISO, SIMO,…
▽ More
This paper introduces Waste Factor (W) and Waste Figure (WF) to assess power efficiency in any multiple-input multiple-output (MIMO) or single-input multiple-output (SIMO) or multiple-input single-output (MISO) cascaded communication system. This paper builds upon the new theory of Waste Factor, which systematically models added wasted power in any cascade for parallel systems such as MISO, SIMO, and MIMO systems, which are prevalent in current wireless networks. Here, we also show the advantage of W compared to conventional metrics for quantifying and analyzing energy efficiency. This work explores the utility of W in assessing energy efficiency in communication channels, within Radio Access Networks (RANs).
△ Less
Submitted 2 May, 2024;
originally announced May 2024.
-
Full-Stack End-to-End Sub-THz Simulations at 140 GHz using NYUSIM Channel Model in ns-3
Authors:
Hitesh Poddar,
Akhileswar Chowdary,
Theodore S. Rappaport,
Marwa Chafii
Abstract:
The next generation of wireless communication is expected to harness the potential of the sub-THz bands to achieve exceptional performance and ubiquitous connectivity. However, network simulators such as ns-3 currently lack support for channel models above 100 GHz. This limits the ability of researchers to study, design, and evaluate systems operating above 100 GHz. Here, we use the drop-based NYU…
▽ More
The next generation of wireless communication is expected to harness the potential of the sub-THz bands to achieve exceptional performance and ubiquitous connectivity. However, network simulators such as ns-3 currently lack support for channel models above 100 GHz. This limits the ability of researchers to study, design, and evaluate systems operating above 100 GHz. Here, we use the drop-based NYUSIM channel model to simulate channels above 100 GHz in all 3GPP scenarios including urban microcell (UMi), urban macrocell (UMa), rural macrocell (RMa), indoor hotspot (InH), and indoor factory (InF). We evaluate the full stack downlink end-to-end performance (throughput, latency, and packet drop) experienced by a single user equipment (UE) connected to a Next Generation Node B (gNB) operating in the sub-THz bands for three gNB--UE antenna configurations: 8x8--4x4, 16x16--4x4, and 64x64--8x8 by using the NYUSIM channel model at 140 GHz in the ns-3 mmWave module. Our simulations demonstrate that sub-THz bands can enable high-fidelity applications that require data rates exceeding 1 Gbps and latency below 15 milliseconds (ms) using the current mmWave protocol stack, and large antenna arrays. In addition, we show the variation in throughput vs number of realizations and find the optimal number of realizations required to obtain statistically significant results. We strongly encourage researchers worldwide to adopt a similar approach, as it enables the readers to assess the accuracy and reliability of the reported results and enhance the findings' overall interpretability.
△ Less
Submitted 11 January, 2024; v1 submitted 26 December, 2023;
originally announced December 2023.
-
ns-3 Implementation of Sub-Terahertz and Millimeter Wave Drop-based NYU Channel Model (NYUSIM)
Authors:
Hitesh Poddar,
Tomoki Yoshimura,
Matteo Pagin,
Theodore S Rappaport,
Art Ishii,
Michele Zorzi
Abstract:
The next generation of wireless networks will use sub-THz frequencies alongside mmWave frequencies to enable multi-Gbps and low-latency applications. To enable different verticals and use cases, engineers must take a holistic approach to build, analyze, and study different parts of the network and the interplay among the lower and higher layers of the protocol stack. It is of paramount importance…
▽ More
The next generation of wireless networks will use sub-THz frequencies alongside mmWave frequencies to enable multi-Gbps and low-latency applications. To enable different verticals and use cases, engineers must take a holistic approach to build, analyze, and study different parts of the network and the interplay among the lower and higher layers of the protocol stack. It is of paramount importance to accurately characterize the radio propagation in diverse scenarios such as urban microcell (UMi), urban macrocell (UMa), rural macrocell (RMa), indoor hotspot (InH), and indoor factory (InF) for a wide range of frequencies. The 3GPP statistical channel model (SCM) is oversimplified and restricted to the frequency range of 0.5-100 GHz. Thus, to overcome these limitations, this paper presents a detailed implementation of the drop-based NYU channel model (NYUSIM) for the frequency range of 0.5-150 GHz for the UMi, UMa, RMa, InH, and InF scenarios. NYUSIM allows researchers to design and evaluate new algorithms and protocols for future sub-THz wireless networks in ns-3.
△ Less
Submitted 2 May, 2023;
originally announced May 2023.
-
Full-Stack End-To-End mmWave Simulations Using 3GPP and NYUSIM Channel Model in ns-3
Authors:
H. Poddar,
T. Yoshimura,
M. Pagin,
T. S. Rappaport,
A. Ishii,
M. Zorzi
Abstract:
Accurate channel modeling and simulation tools are vital for studying sub-THz and millimeter (mmWave) wideband communication system performance. To accurately design future high data rate, low latency wireless modems, the entire protocol stack must be appropriately modeled to understand how the physical layer impacts the end-to-end performance experienced by the end user. This paper presents a ful…
▽ More
Accurate channel modeling and simulation tools are vital for studying sub-THz and millimeter (mmWave) wideband communication system performance. To accurately design future high data rate, low latency wireless modems, the entire protocol stack must be appropriately modeled to understand how the physical layer impacts the end-to-end performance experienced by the end user. This paper presents a full stack end-to-end performance analysis in ns-3 using drop-based NYU channel model (NYUSIM) and 3GPP statistical channel model (SCM) in scenarios, namely urban microcell (UMi), urban macrocell (UMa), rural macrocell (RMa), and indoor hotspot (InH) at 28 GHz with 100 MHz bandwidth. Video data is transmitted at 50 Mbps using User Datagram Protocol (UDP), and we observe that the RMa channel is benign in non-line of sight (NLOS) for NYUSIM and 3GPP SCM as it exhibits no packet drops and yields maximum throughput (48.1 Mbps) and latency of $\sim$ 20 ms. In NLOS, for NYUSIM, the UMa and RMa channels are similar in terms of throughput and packet drops, and the latency in UMi and InH scenarios is 10 times and 25 times higher respectively compared to UMa. Our results indicate that mmWave bands can support data rates of 50 Mbps with negligible packet drops and latency below 150 ms in all scenarios using NYUSIM.
△ Less
Submitted 5 March, 2023; v1 submitted 23 February, 2023;
originally announced February 2023.
-
Calibration of NYURay, a 3D mmWave and sub-THz Ray Tracer using Indoor, Outdoor, and Factory Channel Measurements
Authors:
O. Kanhere,
T. S. Rappaport
Abstract:
Ray tracing is a powerful tool that can be used to predict wireless channel characteristics, reducing the need for extensive channel measurements for channel characterization, evaluation of performance of sensing applications such as position location, and wireless network deployment. In this work, NYURay, a 3D mmWave and sub-THz ray tracer, is introduced, which is calibrated to wireless channel p…
▽ More
Ray tracing is a powerful tool that can be used to predict wireless channel characteristics, reducing the need for extensive channel measurements for channel characterization, evaluation of performance of sensing applications such as position location, and wireless network deployment. In this work, NYURay, a 3D mmWave and sub-THz ray tracer, is introduced, which is calibrated to wireless channel propagation measurements conducted at 28, 73, and 140 GHz, in indoor office, outdoor, and factory environments. We present an accurate yet low-complexity calibration procedure to obtain electrical properties of materials in any environment by modeling the reflection coefficient of building materials to be independent of the angle of incidence, a simplification shown to be quite effective in [1] over 30 years ago. We show that after calibration, NYURay can accurately predict individual directional multipath signal power. The standard deviation in the error of the directional multipath power predicted by the ray tracer compared to the directional measured power was less than 3 dB in indoor office environments and less than 2 dB in outdoor and factory environments.
△ Less
Submitted 23 February, 2023;
originally announced February 2023.
-
142 GHz Multipath Propagation Measurements and Path Loss Channel Modeling in Factory Buildings
Authors:
Shihao Ju,
Theodore S. Rappaport
Abstract:
This paper presents sub-Terahertz (THz) radio propagation measurements at 142 GHz conducted in four factories with various layouts and facilities to explore sub-THz wireless channels for smart factories in 6G and beyond. Here we study spatial and temporal channel responses at 82 transmitter-receiver (TX-RX) locations across four factories in the New York City area and over distances from 5 m to 85…
▽ More
This paper presents sub-Terahertz (THz) radio propagation measurements at 142 GHz conducted in four factories with various layouts and facilities to explore sub-THz wireless channels for smart factories in 6G and beyond. Here we study spatial and temporal channel responses at 82 transmitter-receiver (TX-RX) locations across four factories in the New York City area and over distances from 5 m to 85 m in both line-of-sight (LOS) and non-LOS (NLOS) environments. The measurements were performed with a sliding-correlation-based channel sounder with 1 GHz RF bandwidth with steerable directional horn antennas with 27 dBi gain and 8\degree~half-power beamwidth at both TX and RX, using both vertical and horizontal antenna polarizations, yielding over 75,000 directional power delay profiles. Channel measurements of two RX heights at 1.5 m (high) emulating handheld devices and at 0.5 m (low) emulating automated guided vehicles (AGVs) were conducted for automated industrial scenarios with various clutter densities. Results yield the first path loss models for indoor factory (InF) environments at 142 GHz and show the low RX height experiences a mean path loss increase of 10.7 dB and 6.0 dB when compared with the high RX height at LOS and NLOS locations, respectively. Furthermore, flat and rotatable metal plates were leveraged as passive reflecting surfaces (PRSs) in channel enhancement measurements to explore the potential power gain on sub-THz propagation channels, demonstrating a range from 0.5 to 22 dB improvement with a mean of 6.5 dB in omnidirectional channel gain as compared to when no PRSs are present.
△ Less
Submitted 23 February, 2023;
originally announced February 2023.
-
A Power Efficiency Metric for Comparing Energy Consumption in Future Wireless Networks in the Millimeter Wave and Terahertz bands
Authors:
O. Kanhere,
H. Poddar,
Y. Xing,
D. Shakya,
S. Ju,
T. S. Rappaport
Abstract:
Future wireless cellular networks will utilize millimeter-wave and sub-THz frequencies and deploy small-cell base stations to achieve data rates on the order of hundreds of Gigabits per second per user. The move to sub-THz frequencies will require attention to sustainability and reduction of power whenever possible to reduce the carbon footprint while maintaining adequate battery life for the mass…
▽ More
Future wireless cellular networks will utilize millimeter-wave and sub-THz frequencies and deploy small-cell base stations to achieve data rates on the order of hundreds of Gigabits per second per user. The move to sub-THz frequencies will require attention to sustainability and reduction of power whenever possible to reduce the carbon footprint while maintaining adequate battery life for the massive number of resource-constrained devices to be deployed. This article analyzes power consumption of future wireless networks using a new metric, the power waste factor ($ W $), which shows promise for the study and development of "green G" - green technology for future wireless networks. Using $ W $, power efficiency can be considered by quantifying the power wasted by all devices on a signal path in a cascade. We then show that the consumption efficiency factor ($CEF$), defined as the ratio of the maximum data rate achieved to the total power consumed, is a novel and powerful measure of power efficiency that shows less energy per bit is expended as the cell size shrinks and carrier frequency and channel bandwidth increase. Our findings offer a standard approach to calculating and comparing power consumption and energy efficiency.
△ Less
Submitted 14 January, 2023; v1 submitted 10 September, 2022;
originally announced September 2022.
-
A Real-Time Millimeter Wave V2V Channel Sounder
Authors:
Aditya Chopra,
Andrew Thornburg,
Ojas Kanhere,
Saeed S. Ghassemzadeh,
Milap Majmundar,
Theodore S. Rappaport
Abstract:
Wireless communication in millimeter wave spectrum is poised to provide the latency and bandwidth needed for advanced use cases unfeasible at lower frequencies. Despite the market potential of vehicular communication networks, investigations into the millimeter wave vehicular channel are lacking. In this paper, we present a detailed overview of a novel 1 GHz wide, multi-antenna vehicle to vehicle…
▽ More
Wireless communication in millimeter wave spectrum is poised to provide the latency and bandwidth needed for advanced use cases unfeasible at lower frequencies. Despite the market potential of vehicular communication networks, investigations into the millimeter wave vehicular channel are lacking. In this paper, we present a detailed overview of a novel 1 GHz wide, multi-antenna vehicle to vehicle directional channel sounding and measurement platform operating at 28 GHz. The channel sounder uses two 256-element phased arrays at the transmitter vehicle and four 64-element arrays at the receiver vehicle, with the receiver measuring 116 different directional beams in less than 1 millisecond. By measuring the full multi-beam channel impulse response at large bandwidths, our system provides unprecedented insight in instantaneous mobile vehicle to vehicle channels. The system also uses centimeter-level global position tracking and 360 degree video capture to provide additional contextual information for joint communication and sensing applications. An initial measurement campaign was conducted on highway and surface streets in Austin, Texas. We show example data that highlights the sensing capability of the system. Preliminary results from the measurement campaign show that bumper mounted mmWave arrays provide rich scattering in traffic as well a provide significant directional diversity aiding towards high reliability vehicular communication. Additionally, potential waveguide effects from high traffic in lanes can also extend the range of mmWave signals significantly.
△ Less
Submitted 16 March, 2022;
originally announced March 2022.
-
Sub-Terahertz Wireless Coverage Analysis at 142 GHz in Urban Microcell
Authors:
Yunchou Xing,
Ojas Kanhere,
Shihao Ju,
Theodore S. Rappaport
Abstract:
Small-cell cellular base stations are going to be used for mmWave and sub-THz communication systems to provide multi-Gbps data rates and reliable coverage to mobile users. This paper analyzes the base station coverage of sub-THz communication systems and the system performance in terms of spectral efficiency through Monte Carlo simulations for both single-cell and multi-cell cases. The simulations…
▽ More
Small-cell cellular base stations are going to be used for mmWave and sub-THz communication systems to provide multi-Gbps data rates and reliable coverage to mobile users. This paper analyzes the base station coverage of sub-THz communication systems and the system performance in terms of spectral efficiency through Monte Carlo simulations for both single-cell and multi-cell cases. The simulations are based on realistic channel models derived from outdoor field measurements at 142 GHz in urban microcell (UMi) environments conducted in downtown Brooklyn, New York. The single-cell base station can provide a downlink coverage area with a radius of 200 m and the 7-cell system can provide a downlink coverage area with a radius of 400 m at 142 GHz. Using a 1 GHz downlink bandwidth and 100 MHz uplink bandwidth, the 7-cell system can provide about 4.5 Gbps downlink average data rate and 410 Mbps uplink average data rate at 142 GHz.
△ Less
Submitted 16 March, 2022;
originally announced March 2022.
-
Sub-Terahertz Spatial Statistical MIMO Channel Model for Urban Microcells at 142 GHz
Authors:
Shihao Ju,
Theodore S. Rappaport
Abstract:
Sixth generation (6G) cellular systems are expected to extend the operational range to sub-Terahertz (THz) frequencies between 100 and 300 GHz due to the broad unexploited spectrum therein. A proper channel model is needed to accurately describe spatial and temporal channel characteristics and faithfully create channel impulse responses at sub-THz frequencies. This paper studies the channel spatia…
▽ More
Sixth generation (6G) cellular systems are expected to extend the operational range to sub-Terahertz (THz) frequencies between 100 and 300 GHz due to the broad unexploited spectrum therein. A proper channel model is needed to accurately describe spatial and temporal channel characteristics and faithfully create channel impulse responses at sub-THz frequencies. This paper studies the channel spatial statistics such as the number of spatial clusters and cluster power distribution based on recent radio propagation measurements conducted at 142 GHz in an urban microcell (UMi) scenario. For the 28 measured locations, we observe one to four spatial clusters at most locations. A detailed spatial statistical multiple input multiple output (MIMO) channel generation procedure is introduced based on the derived empirical channel statistics. We find that beamforming provides better spectral efficiency than spatial multiplexing in the LOS scenario due to the boresight path, and two spatial streams usually offer the highest spectral efficiency at most NLOS locations due to the limited number of spatial clusters.
△ Less
Submitted 12 October, 2021;
originally announced October 2021.
-
Millimeter Wave and Terahertz Urban Microcell Propagation Measurements and Models
Authors:
Yunchou Xing,
Theodore S. Rappaport
Abstract:
Comparisons of outdoor Urban Microcell (UMi) large-scale path loss models, root mean square (RMS) delay spreads (DS), angular spreads (AS), and the number of spatial beams for extensive measurements performed at 28, 38, 73, and 142 GHz are presented in this letter. Measurement campaigns were conducted from 2011-2020 in downtown Austin, Texas, Manhattan (New York City), and Brooklyn, New York with…
▽ More
Comparisons of outdoor Urban Microcell (UMi) large-scale path loss models, root mean square (RMS) delay spreads (DS), angular spreads (AS), and the number of spatial beams for extensive measurements performed at 28, 38, 73, and 142 GHz are presented in this letter. Measurement campaigns were conducted from 2011-2020 in downtown Austin, Texas, Manhattan (New York City), and Brooklyn, New York with communication ranges up to 930 m. Key similarities and differences in outdoor wireless channels are observed when comparing the channel statistics across a wide range of frequencies from millimeter-wave to sub-THz bands. Path loss exponents (PLEs) are remarkably similar over all measured frequencies, when referenced to the first meter free space path loss, and the RMS DS and AS decrease as frequency increases. The similar PLEs from millimeter-wave to THz frequencies imply that spacing between cellular base stations will not have to change as carrier frequencies increase towards THz, since wider bandwidth channels at sub-THz or THz carrier frequencies will cover similar distances because antenna gains increase quadratically with increasing frequency when the physical antenna area remain constant.
△ Less
Submitted 27 September, 2021;
originally announced September 2021.
-
Millimeter Wave and Sub-Terahertz Spatial Statistical Channel Model for an Indoor Office Building
Authors:
Shihao Ju,
Yunchou Xing,
Ojas Kanhere,
Theodore S. Rappaport
Abstract:
Millimeter-wave (mmWave) and sub-Terahertz (THz) frequencies are expected to play a vital role in 6G wireless systems and beyond due to the vast available bandwidth of many tens of GHz. This paper presents an indoor 3-D spatial statistical channel model for mmWave and sub-THz frequencies based on extensive radio propagation measurements at 28 and 140 GHz conducted in an indoor office environment f…
▽ More
Millimeter-wave (mmWave) and sub-Terahertz (THz) frequencies are expected to play a vital role in 6G wireless systems and beyond due to the vast available bandwidth of many tens of GHz. This paper presents an indoor 3-D spatial statistical channel model for mmWave and sub-THz frequencies based on extensive radio propagation measurements at 28 and 140 GHz conducted in an indoor office environment from 2014 to 2020. Omnidirectional and directional path loss models and channel statistics such as the number of time clusters, cluster delays, and cluster powers were derived from over 15,000 measured power delay profiles. The resulting channel statistics show that the number of time clusters follows a Poisson distribution and the number of subpaths within each cluster follows a composite exponential distribution for both LOS and NLOS environments at 28 and 140 GHz. This paper proposes a unified indoor statistical channel model for mmWave and sub-Terahertz frequencies following the mathematical framework of the previous outdoor NYUSIM channel models. A corresponding indoor channel simulator is developed, which can recreate 3-D omnidirectional, directional, and multiple input multiple output (MIMO) channels for arbitrary mmWave and sub-THz carrier frequency up to 150 GHz, signal bandwidth, and antenna beamwidth. The presented statistical channel model and simulator will guide future air-interface, beamforming, and transceiver designs for 6G and beyond.
△ Less
Submitted 31 March, 2021;
originally announced March 2021.
-
140 GHz Urban Microcell Propagation Measurements for Spatial Consistency Modeling
Authors:
Shihao Ju,
Theodore S. Rappaport
Abstract:
Sub-Terahertz frequencies (frequencies above 100 GHz) have the potential to satisfy the unprecedented demand on data rate on the order of hundreds of Gbps for sixth-generation (6G) wireless communications and beyond. Accurate beam tracking and rapid beam selection are increasingly important since antenna arrays with more elements generate narrower beams to compensate for additional path loss withi…
▽ More
Sub-Terahertz frequencies (frequencies above 100 GHz) have the potential to satisfy the unprecedented demand on data rate on the order of hundreds of Gbps for sixth-generation (6G) wireless communications and beyond. Accurate beam tracking and rapid beam selection are increasingly important since antenna arrays with more elements generate narrower beams to compensate for additional path loss within the first meter of propagation distance at sub-THz frequencies. Realistic channel models for above 100 GHz are needed, and should include spatial consistency to model the spatial and temporal channel evolution along the user trajectory. This paper introduces recent outdoor urban microcell (UMi) propagation measurements at 142 GHz along a 39 m $\times$ 12 m rectangular route (102 m long), where each consecutive and adjacent receiver location is 3 m apart from each other. The measured power delay profiles and angular power spectrum at each receiver location are used to study spatial autocorrelation properties of various channel parameters such as shadow fading, delay spread, and angular spread along the track. Compared to the correlation distances reported in the 3GPP TR 38.901 for frequencies below 100 GHz, the measured correlation distance of shadow fading at 142 GHz (3.8 m) is much shorter than the 10-13 m as specified in 3GPP; the measured correlation distances of delay spread and angular spread at 142 GHz (both 12 m) are comparable to the 7-10 m as specified in 3GPP. This result may guide the development of a statistical spatially consistent channel model for frequencies above 100 GHz in the UMi street canyon environment.
△ Less
Submitted 9 March, 2021;
originally announced March 2021.
-
Outdoor sub-THz Position Location and Tracking using Field Measurements at 142 GHz
Authors:
Ojas Kanhere,
Theodore S. Rappaport
Abstract:
Future sub-THz cellular deployments may be utilized to complement the coverage of the global positioning system (GPS) and provide centimeter-level accuracy. In this work, we use measurement data at 142 GHz to test a map-based position location algorithm in an outdoor urban microcell (UMi) environment. We utilize an extended Kalman filter (EKF) to track the position of the user equipment (UE) along…
▽ More
Future sub-THz cellular deployments may be utilized to complement the coverage of the global positioning system (GPS) and provide centimeter-level accuracy. In this work, we use measurement data at 142 GHz to test a map-based position location algorithm in an outdoor urban microcell (UMi) environment. We utilize an extended Kalman filter (EKF) to track the position of the user equipment (UE) along a rectangular track, with the transmitter-receiver separation distances varying from 24.3 m to 52.8 m. The position and velocity of the UE are tracked by the EKF, with measurements of the angle of arrival and time of flight information obtained along an outdoor track, to provide a mean accuracy of 24.8 cm at 142 GHz, over 34 UE locations, using a single base station in line-of-sight and non-line-of-sight.
△ Less
Submitted 8 March, 2021;
originally announced March 2021.
-
Performance Impact Analysis of Beam Switching in Millimeter Wave Vehicular Communications
Authors:
O. Kanhere,
A. Chopra,
A. Thornburg,
T. S. Rappaport,
S. S. Ghassemzadeh
Abstract:
Millimeter wave wireless spectrum deployments will allow vehicular communications to share high data rate vehicular sensor data in real-time. The highly directional nature of wireless links in millimeter spectral bands will require continuous channel measurements to ensure the transmitter (TX) and receiver (RX) beams are aligned to provide the best channel. Using real-world vehicular mmWave measur…
▽ More
Millimeter wave wireless spectrum deployments will allow vehicular communications to share high data rate vehicular sensor data in real-time. The highly directional nature of wireless links in millimeter spectral bands will require continuous channel measurements to ensure the transmitter (TX) and receiver (RX) beams are aligned to provide the best channel. Using real-world vehicular mmWave measurement data at 28 GHz, we determine the optimal beam sweeping period, i.e. the frequency of the channel measurements, to align the RX beams to the best channel directions for maximizing the vehicle-to-infrastructure (V2I) throughput. We show that in a realistic vehicular traffic environment in Austin, TX, for a vehicle traveling at an average speed of 10.5 mph, a beam sweeping period of 300 ms in future V2I communication standards would maximize the V2I throughput, using a system of four RX phased arrays that scanned the channel 360 degrees in the azimuth and 30 degrees above and below the boresight. We also investigate the impact of the number of active RX chains controlling the steerable phased arrays on V2I throughput. Reducing the number of RX chains controlling the phased arrays helps reduce the cost of the vehicular mmWave hardware while multiple RX chains, although more expensive, provide more robustness to beam direction changes at the vehicle, allowing near maximum throughput over a wide range of beam sweep periods. We show that the overhead of utilizing one RX chain instead of four leads to a 10% drop in mean V2I throughput over six non-line-of-sight runs in real traffic conditions, with each run being 10 to 20 seconds long over a distance of 40 to 90 meters.
△ Less
Submitted 4 March, 2021;
originally announced March 2021.
-
High Altitude Platform Stations (HAPS): Architecture and System Performance
Authors:
Yunchou Xing,
Frank Hsieh,
Amitava Ghosh,
Theodore S. Rappaport
Abstract:
High Altitude Platform Station (HAPS) has the potential to provide global wireless connectivity and data services such as high-speed wireless backhaul, industrial Internet of things (IoT), and public safety for large areas not served by terrestrial networks. A unified HAPS design is desired to support various use cases and a wide range of requirements. In this paper, we present two architecture de…
▽ More
High Altitude Platform Station (HAPS) has the potential to provide global wireless connectivity and data services such as high-speed wireless backhaul, industrial Internet of things (IoT), and public safety for large areas not served by terrestrial networks. A unified HAPS design is desired to support various use cases and a wide range of requirements. In this paper, we present two architecture designs of the HAPS system: i) repeater based HAPS, and ii) base station based HAPS, which are both viable technical solutions. The energy efficiency is analyzed and compared between the two architectures using consumption factor theory. The system performance of these two architectures is evaluated through Monte Carlo simulations and is characterized in metrics of spectral efficiency using LTE band 1 for both single-cell and multi-cell cases. Both designs can provide good downlink spectral efficiency and coverage, while the uplink coverage is significantly limited by UE transmit power and antenna gain. Using directional antennas at the UEs can improve the system performance for both downlink and uplink.
△ Less
Submitted 4 March, 2021;
originally announced March 2021.
-
Target Localization using Bistatic and Multistatic Radar with 5G NR Waveform
Authors:
O. Kanhere,
S. Goyal,
M. Beluri,
T. S. Rappaport
Abstract:
Joint communication and sensing allows the utilization of common spectral resources for communication and localization, reducing the cost of deployment. By using fifth generation (5G) New Radio (NR) (i.e., the 3rd Generation Partnership Project Radio Access Network for 5G) reference signals, conventionally used for communication, this paper shows sub-meter precision localization is possible at mil…
▽ More
Joint communication and sensing allows the utilization of common spectral resources for communication and localization, reducing the cost of deployment. By using fifth generation (5G) New Radio (NR) (i.e., the 3rd Generation Partnership Project Radio Access Network for 5G) reference signals, conventionally used for communication, this paper shows sub-meter precision localization is possible at millimeter wave frequencies. We derive the geometric dilution of precision of a bistatic radar configuration, a theoretical metric that characterizes how the target location estimation error varies as a function of the bistatic geometry and measurement errors. We develop a 5G NR compliant software test bench to characterize the measurement errors when estimating the time difference of arrival and angle of arrival with 5G NR waveforms. The test bench is further utilized to demonstrate the accuracy of target localization and velocity estimation in several indoor and outdoor bistatic and multistatic configurations and to show that on average, the bistatic configuration can achieve a location accuracy of 10.0 cm over a bistatic range of 25 m, which can be further improved by deploying a multistatic radar configuration.
△ Less
Submitted 4 March, 2021;
originally announced March 2021.
-
Propagation Measurements and Path Loss Models for sub-THz in Urban Microcells
Authors:
Yunchou Xing,
Theodore S. Rappaport
Abstract:
Terahertz frequency bands will likely be used for the next-generation wireless communication systems to provide data rates of hundreds of Gbps or even Tbps because of the wide swaths of unused and unexplored spectrum. This paper presents two outdoor wideband measurement campaigns in downtown Brooklyn (urban microcell environment) in the sub-THz band of 140 GHz with TX-RX separation distance up to…
▽ More
Terahertz frequency bands will likely be used for the next-generation wireless communication systems to provide data rates of hundreds of Gbps or even Tbps because of the wide swaths of unused and unexplored spectrum. This paper presents two outdoor wideband measurement campaigns in downtown Brooklyn (urban microcell environment) in the sub-THz band of 140 GHz with TX-RX separation distance up to 100 m: i) terrestrial urban microcell measurement campaign, and ii) rooftop surrogate satellite and backhaul measurement campaign. Outdoor omnidirectional and directional path loss models for both line-of-sight and non-line-of-sight scenarios, as well as foliage loss (signal attenuation through foliage), are provided at 140 GHz for urban microcell environments. These measurements and models provide an understanding of both the outdoor terrestrial (e.g., 6G cellular and backhaul) and non-terrestrial (e.g., satellite and unmanned aerial vehicle communications) wireless channels, and prove the feasibility of using THz frequency bands for outdoor fixed and mobile cellular communications. This paper can be used for future outdoor wireless system design at frequencies above 100 GHz.
△ Less
Submitted 2 March, 2021; v1 submitted 1 March, 2021;
originally announced March 2021.
-
Terahertz Wireless Communications: Co-sharing for Terrestrial and Satellite Systems above 100 GHz
Authors:
Yunchou Xing,
Theodore S. Rappaport
Abstract:
This paper demonstrates how spectrum up to 1 THz will support mobile communications beyond 5G in the coming decades. Results of rooftop surrogate satellite/tower base station measurements at 140 GHz show the natural isolation between terrestrial networks and surrogate satellite systems, as well as between terrestrial mobile users and co-channel fixed backhaul links. These first-of-their-kind measu…
▽ More
This paper demonstrates how spectrum up to 1 THz will support mobile communications beyond 5G in the coming decades. Results of rooftop surrogate satellite/tower base station measurements at 140 GHz show the natural isolation between terrestrial networks and surrogate satellite systems, as well as between terrestrial mobile users and co-channel fixed backhaul links. These first-of-their-kind measurements and accompanying analysis show that by keeping the energy radiated by terrestrial emitters on the horizon (e.g., elevation angles $\leq$15\textdegree), there will not likely be interference in the same or adjacent bands between passive satellite sensors and terrestrial terminals, or between mobile links and terrestrial backhaul links at frequencies above 100 GHz.
△ Less
Submitted 27 May, 2021; v1 submitted 28 February, 2021;
originally announced March 2021.
-
Millimeter Wave and sub-THz Indoor Radio Propagation Channel Measurements, Models, and Comparisons in an Office Environment
Authors:
Yunchou Xing,
Theodore S. Rappaport,
Amitava Ghosh
Abstract:
This letter provides a comparison of indoor radio propagation measurements and corresponding channel statistics at 28, 73, and 140 GHz, based on extensive measurements from 2014-2020 in an indoor office environment. Side-by-side comparisons of propagation characteristics (e.g., large-scale path loss and multipath time dispersion) across a wide range of frequencies from the low millimeter wave band…
▽ More
This letter provides a comparison of indoor radio propagation measurements and corresponding channel statistics at 28, 73, and 140 GHz, based on extensive measurements from 2014-2020 in an indoor office environment. Side-by-side comparisons of propagation characteristics (e.g., large-scale path loss and multipath time dispersion) across a wide range of frequencies from the low millimeter wave band of 28 GHz to the sub-THz band of 140 GHz illustrate the key similarities and differences in indoor wireless channels. The measurements and models show remarkably similar path loss exponents over frequencies in both line-of-sight (LOS) and non-LOS (NLOS) scenarios, when using a one meter free space reference distance, while the multipath time dispersion becomes smaller at higher frequencies. The 3GPP indoor channel model overestimates the large-scale path loss and has unrealistic large numbers of clusters and multipath components per cluster compared to the measured channel statistics in this letter.
△ Less
Submitted 28 July, 2021; v1 submitted 27 February, 2021;
originally announced March 2021.
-
Position Location for Futuristic Cellular Communications -- 5G and Beyond
Authors:
Ojas Kanhere,
Theodore S. Rappaport
Abstract:
With vast mmWave spectrum and narrow beam antenna technology, precise position location is now possible in 5G and future mobile communication systems. In this article, we describe how centimeterlevel localization accuracy can be achieved, particularly through the use of map-based techniques. We show how data fusion of parallel information streams, machine learning, and cooperative localization tec…
▽ More
With vast mmWave spectrum and narrow beam antenna technology, precise position location is now possible in 5G and future mobile communication systems. In this article, we describe how centimeterlevel localization accuracy can be achieved, particularly through the use of map-based techniques. We show how data fusion of parallel information streams, machine learning, and cooperative localization techniques further improve positioning accuracy.
△ Less
Submitted 24 February, 2021;
originally announced February 2021.
-
3-D Statistical Indoor Channel Model for Millimeter-Wave and Sub-Terahertz Bands
Authors:
Shihao Ju,
Yunchou Xing,
Ojas Kanhere,
Theodore S. Rappaport
Abstract:
Millimeter-wave (mmWave) and Terahertz (THz) will be used in the sixth-generation (6G) wireless systems, especially for indoor scenarios. This paper presents an indoor three-dimensional (3-D) statistical channel model for mmWave and sub-THz frequencies, which is developed from extensive channel propagation measurements conducted in an office building at 28 GHz and 140 GHz in 2014 and 2019. Over 15…
▽ More
Millimeter-wave (mmWave) and Terahertz (THz) will be used in the sixth-generation (6G) wireless systems, especially for indoor scenarios. This paper presents an indoor three-dimensional (3-D) statistical channel model for mmWave and sub-THz frequencies, which is developed from extensive channel propagation measurements conducted in an office building at 28 GHz and 140 GHz in 2014 and 2019. Over 15,000 power delay profiles (PDPs) were recorded to study channel statistics such as the number of time clusters, cluster delays, and cluster powers. All the parameters required in the channel generation procedure are derived from empirical measurement data for 28 GHz and 140 GHz line-of-sight (LOS) and non-line-of-sight (NLOS) scenarios. The channel model is validated by showing that the simulated root mean square (RMS) delay spread and RMS angular spread yield good agreements with measured values. An indoor channel simulation software is built upon the popular NYUSIM outdoor channel simulator, which can generate realistic channel impulse response, PDP, and power angular spectrum.
△ Less
Submitted 27 September, 2020;
originally announced September 2020.
-
Real-time Millimeter Wave Omnidirectional Channel Sounder Using Phased Array Antennas
Authors:
Aditya Chopra,
Andrew Thornburg,
Ojas Kanhere,
Abbas Termos,
Saeed S. Ghassemzadeh,
Theodore S. Rappaport
Abstract:
Characterization of the millimeter wave wireless channel is needed to facilitate fully connected vehicular communication in the future. To study the multipath-rich, rapidly varying nature of the vehicular propagation environment, fast millimeter wave channel sounders are required. We present a channel sounder design capable of covering 360 degrees in azimuth and 60 degrees in elevation with 200 in…
▽ More
Characterization of the millimeter wave wireless channel is needed to facilitate fully connected vehicular communication in the future. To study the multipath-rich, rapidly varying nature of the vehicular propagation environment, fast millimeter wave channel sounders are required. We present a channel sounder design capable of covering 360 degrees in azimuth and 60 degrees in elevation with 200 individual beam directions in 6.25 ms by using four phased arrays simultaneously. The channel measurements are accompanied by high resolution positioning and video data, allowing channel sounding to be conducted while either the transmitter, or the receiver, or both are moving. Channel sounding campaigns were conducted at multiple urban locations with light traffic conditions in Austin, Texas. Preliminary results show that beam selection at the receiver can lower the effective pathloss exponent to 1.6 for line-of-sight and 2.25 for non line-of-sight.
△ Less
Submitted 23 September, 2020;
originally announced September 2020.
-
Millimeter Wave Position Location using Multipath Differentiation for 3GPP using Field Measurements
Authors:
Ojas Kanhere,
Theodore S. Rappaport
Abstract:
3GPP air interface standards support meter-level position location of a user in a cellular network. With wider bandwidths and narrow antenna beamwidths available at mmWave frequencies, cellular networks now have the potential to provide sub-meter position location for each user. In this work, we provide an overview of 3GPP position location techniques that are designed for line-of-sight propagatio…
▽ More
3GPP air interface standards support meter-level position location of a user in a cellular network. With wider bandwidths and narrow antenna beamwidths available at mmWave frequencies, cellular networks now have the potential to provide sub-meter position location for each user. In this work, we provide an overview of 3GPP position location techniques that are designed for line-of-sight propagation. We discuss additional measurements required in the 3GPP standard that enable multipath-based non-line-of-sight position location. Further, we validate the concepts in this paper by using field data to test a map-based position location algorithm in an indoor office environment which has dimensions of 35 m by 65.5 m. We demonstrate how the fusion of angle of arrival and time of flight information in concert with a 3-D map of the office provides a mean accuracy of 5.72 cm at 28 GHz and 6.29 cm at 140 GHz, over 23 receiver distances ranging from 4.2 m to 32.3 m, using a single base station in line-of-sight and non-line-of-sight. We also conduct a theoretical analysis of the typical error experienced in the map-based position location algorithm and show that the complexity of the map-based algorithm is low enough to allow real-time implementation.
△ Less
Submitted 21 September, 2020;
originally announced September 2020.
-
Map-Assisted Millimeter Wave Localization for Accurate Position Location
Authors:
Ojas Kanhere,
Shihao Ju,
Yunchou Xing,
Theodore S. Rappaport
Abstract:
Accurate precise positioning at millimeter wave frequencies is possible due to the large available bandwidth that permits precise on-the-fly time of flight measurements using conventional air interface standards. In addition, narrow antenna beamwidths may be used to determine the angles of arrival and departure of the multipath components between the base station and mobile users. By combining acc…
▽ More
Accurate precise positioning at millimeter wave frequencies is possible due to the large available bandwidth that permits precise on-the-fly time of flight measurements using conventional air interface standards. In addition, narrow antenna beamwidths may be used to determine the angles of arrival and departure of the multipath components between the base station and mobile users. By combining accurate temporal and angular information of multipath components with a 3-D map of the environment (that may be built by each user or downloaded a-priori), robust localization is possible, even in non-line-of-sight environments. In this work, we develop an accurate 3-D ray tracer for an indoor office environment and demonstrate how the fusion of angle of departure and time of flight information in concert with a 3-D map of a typical large office environment provides a mean accuracy of 12.6 cm in line-of-sight and 16.3 cm in non-line-of-sight, over 100 receiver distances ranging from 1.5 m to 24.5 m using a single base station. We show how increasing the number of base stations improves the average non-line-of-sight position location accuracy to 5.5 cm at 21 locations with a maximum propagation distance of 24.5 m.
△ Less
Submitted 26 August, 2019;
originally announced August 2019.
-
Indoor Wireless Channel Properties at Millimeter Wave and Sub-Terahertz Frequencies
Authors:
Yunchou Xing,
Ojas Kanhere,
Shihao Ju,
Theodore S. Rappaport
Abstract:
This paper provides indoor reflection, scattering, transmission, and large-scale path loss measurements and models, which describe the main propagation mechanisms at millimeter wave and Terahertz frequencies. Channel properties for common building materials (drywall and clear glass) are carefully studied at 28, 73, and 140 GHz using a wideband sliding correlation based channel sounder system with…
▽ More
This paper provides indoor reflection, scattering, transmission, and large-scale path loss measurements and models, which describe the main propagation mechanisms at millimeter wave and Terahertz frequencies. Channel properties for common building materials (drywall and clear glass) are carefully studied at 28, 73, and 140 GHz using a wideband sliding correlation based channel sounder system with rotatable narrow-beam horn antennas. Reflection coefficient is shown to linearly increase as the incident angle increases, and lower reflection loss (e.g., stronger reflections) are observed as frequencies increase for a given incident angle. Although backscatter from drywall is present at 28, 73, and 140 GHz, smooth surfaces (like drywall) are shown to be modeled as a simple reflected surface, since the scattered power is 20 dB or more below the reflected power over the measured range of frequency and angles. Partition loss tends to increase with frequency, but the amount of loss is material dependent. Both clear glass and drywall are shown to induce a depolarizing effect, which becomes more prominent as frequency increases. Indoor propagation measurements and large-scale indoor path loss models at 140 GHz are provided, revealing similar path loss exponent and shadow fading as observed at 28 and 73 GHz. The measurements and models in this paper can be used for future wireless system design and other applications within buildings for frequencies above 100 GHz.
△ Less
Submitted 3 December, 2019; v1 submitted 26 August, 2019;
originally announced August 2019.
-
A Millimeter-Wave Channel Simulator NYUSIM with Spatial Consistency and Human Blockage
Authors:
Shihao Ju,
Ojas Kanhere,
Yunchou Xing,
Theodore S. Rappaport
Abstract:
Accurate channel modeling and simulation are indispensable for millimeter-wave wideband communication systems that employ electrically-steerable and narrow beam antenna arrays. Three important channel modeling components, spatial consistency, human blockage, and outdoor-to-indoor penetration loss, were proposed in the 3rd Generation Partnership Project Release 14 for mmWave communication system de…
▽ More
Accurate channel modeling and simulation are indispensable for millimeter-wave wideband communication systems that employ electrically-steerable and narrow beam antenna arrays. Three important channel modeling components, spatial consistency, human blockage, and outdoor-to-indoor penetration loss, were proposed in the 3rd Generation Partnership Project Release 14 for mmWave communication system design. This paper presents NYUSIM 2.0, an improved channel simulator which can simulate spatially consistent channel realizations based on the existing drop-based channel simulator NYUSIM 1.6.1. A geometry-based approach using multiple reflection surfaces is proposed to generate spatially correlated and time-variant channel coefficients. Using results from 73 GHz pedestrian measurements for human blockage, a four-state Markov model has been implemented in NYUSIM to simulate dynamic human blockage shadowing loss. To model the excess path loss due to penetration into buildings, a parabolic model for outdoor-to-indoor penetration loss has been adopted from the 5G Channel Modeling special interest group and implemented in NYUSIM 2.0. This paper demonstrates how these new modeling capabilities reproduce realistic data when implemented in Monte Carlo fashion using NYUSIM 2.0, making it a valuable measurement-based channel simulator for fifth-generation and beyond mmWave communication system design and evaluation.
△ Less
Submitted 26 August, 2019;
originally announced August 2019.
-
Scattering Mechanisms and Modeling for Terahertz Wireless Communications
Authors:
Shihao Ju,
Syed Hashim Ali Shah,
Muhammad Affan Javed,
Jun Li,
Girish Palteru,
Jyotish Robin,
Yunchou Xing,
Ojas Kanhere,
Theodore S. Rappaport
Abstract:
This paper provides an analysis of radio wave scattering for frequencies ranging from the microwave to the Terahertz band (e.g., 1 GHz - 1 THz), by studying the scattering power reradiated from various types of materials with different surface roughnesses. First, fundamentals of scattering and reflection are developed and explained for use in wireless mobile radio, and the effect of scattering on…
▽ More
This paper provides an analysis of radio wave scattering for frequencies ranging from the microwave to the Terahertz band (e.g., 1 GHz - 1 THz), by studying the scattering power reradiated from various types of materials with different surface roughnesses. First, fundamentals of scattering and reflection are developed and explained for use in wireless mobile radio, and the effect of scattering on the reflection coefficient for rough surfaces is investigated. Received power is derived using two popular scattering models - the directive scattering (DS) model and the radar cross section (RCS) model through simulations over a wide range of frequencies, materials, and orientations for the two models, and measurements confirm the accuracy of the DS model at 140 GHz. This paper shows that scattering can become a prominent propagation mechanism as frequencies extend to millimeter-wave (mmWave) and beyond, but at other times can be treated like simple reflection. Knowledge of scattering effects is critical for appropriate and realistic channel models, which further support the development of massive multiple input-multiple output (MIMO) techniques, localization, ray tracing tool design, and imaging for future 5G and 6G wireless systems.
△ Less
Submitted 8 March, 2019; v1 submitted 6 March, 2019;
originally announced March 2019.
-
Propagation Measurement System and Approach at 140 GHz-Moving to 6G and Above 100 GHz
Authors:
Yunchou Xing,
Theodore S. Rappaport
Abstract:
With the relatively recent realization that millimeter wave frequencies are viable for mobile communications, extensive measurements and research have been conducted on frequencies from 0.5 to 100 GHz, and several global wireless standard bodies have proposed channel models for frequencies below 100 GHz. Presently, little is known about the radio channel above 100 GHz where there are much wider un…
▽ More
With the relatively recent realization that millimeter wave frequencies are viable for mobile communications, extensive measurements and research have been conducted on frequencies from 0.5 to 100 GHz, and several global wireless standard bodies have proposed channel models for frequencies below 100 GHz. Presently, little is known about the radio channel above 100 GHz where there are much wider unused bandwidth slots available. This paper summarizes wireless communication research and activities above 100 GHz, overviews the results of previously published propagation measurements at D-band (110-170 GHz), provides the design of a 140 GHz wideband channel sounder system, and proposes indoor wideband propagation measurements and penetration measurements for common materials at 140 GHz which were not previously investigated.
△ Less
Submitted 22 August, 2018;
originally announced August 2018.
-
Millimeter-wave Extended NYUSIM Channel Model for Spatial Consistency
Authors:
Shihao Ju,
Theodore S. Rappaport
Abstract:
Commonly used drop-based channel models cannot satisfy the requirements of spatial consistency for millimeter-wave (mmWave) channel modeling where transient motion or closely-spaced users need to be considered. A channel model having \textit{spatial consistency} can capture the smooth variations of channels, when a user moves, or when multiple users are close to each other in a local area within,…
▽ More
Commonly used drop-based channel models cannot satisfy the requirements of spatial consistency for millimeter-wave (mmWave) channel modeling where transient motion or closely-spaced users need to be considered. A channel model having \textit{spatial consistency} can capture the smooth variations of channels, when a user moves, or when multiple users are close to each other in a local area within, say, 10 m in an outdoor scenario. Spatial consistency is needed to support the testing of beamforming and beam tracking for massive multiple-input and multiple-output (MIMO) and multi-user MIMO in fifth-generation (5G) mmWave mobile networks. This paper presents a channel model extension and an associated implementation of spatial consistency in the NYUSIM channel simulation platform. Along with a mathematical model, we use measurements where the user moved along a street and turned at a corner over a path length of 75 m in order to derive realistic values of several key parameters such as correlation distance and the rate of cluster birth and death, that are shown to provide spatial consistency for NYUSIM in an urban microcell street canyon scenario.
△ Less
Submitted 21 August, 2018;
originally announced August 2018.
-
Position Locationing for Millimeter Wave Systems
Authors:
Ojas Kanhere,
Theodore S. Rappaport
Abstract:
The vast amount of spectrum available for millimeter wave (mmWave) wireless communication systems will support accurate real-time positioning concurrent with communication signaling. This paper demonstrates that accurate estimates of the position of an unknown node can be determined using estimates of time of arrival (ToA), angle of arrival (AoA), as well as data fusion or machine learning. Real-w…
▽ More
The vast amount of spectrum available for millimeter wave (mmWave) wireless communication systems will support accurate real-time positioning concurrent with communication signaling. This paper demonstrates that accurate estimates of the position of an unknown node can be determined using estimates of time of arrival (ToA), angle of arrival (AoA), as well as data fusion or machine learning. Real-world data at 28 GHz and 73 GHz is used to show that AoA-based localization techniques will need to be augmented with other positioning techniques. The fusion of AoA-based positioning with received power measurements for RXs in an office which has dimensions of 35 m by 65.5 m is shown to provide location accuracies ranging from 16 cm to 3.25 m, indicating promise for accurate positioning capabilities in future networks. Received signal strength intensity (RSSI) based positioning techniques that exploit the ordering of the received power can be used to determine rough estimates of user position. Prediction of received signal characteristics is done using 2-D ray tracing.
△ Less
Submitted 21 August, 2018;
originally announced August 2018.
-
Simulating Motion - Incorporating Spatial Consistency into the NYUSIM Channel Model
Authors:
Shihao Ju,
Theodore S. Rappaport
Abstract:
This paper describes an implementation of spatial consistency in the NYUSIM channel simulation platform. NYUSIM is a millimeter wave (mmWave) channel simulator that realizes measurement-based channel models based on a wide range of multipath channel parameters, including realistic multipath time delays and multipath components that arrive at different 3-D angles in space, and generates life-like s…
▽ More
This paper describes an implementation of spatial consistency in the NYUSIM channel simulation platform. NYUSIM is a millimeter wave (mmWave) channel simulator that realizes measurement-based channel models based on a wide range of multipath channel parameters, including realistic multipath time delays and multipath components that arrive at different 3-D angles in space, and generates life-like samples of channel impulse responses (CIRs) that statistically match those measured in the real world. To properly simulate channel impairments and variations for adaptive antenna algorithms or channel state feedback, channel models should implement spatial consistency which ensures correlated channel responses over short time and distance epochs. The ability to incorporate spatial consistency into channel simulators will be essential to explore the ability to train and deploy massive multiple-input and multiple-output (MIMO) and multi-user beamforming in next-generation mobile communication systems. This paper reviews existing modeling approaches to spatial consistency, and describes an implementation of spatial consistency in NYUSIM for when a user is moving in a square area having a side length of 15 m. The spatial consistency extension will enable NYUSIM to generate realistic evolutions of temporal and spatial characteristics of the wideband CIRs for mobile users in motion, or for multiple users who are relatively close to one another.
△ Less
Submitted 3 September, 2018; v1 submitted 11 July, 2018;
originally announced July 2018.
-
Verification and Calibration of Antenna Cross-Polarization Discrimination and Penetration Loss for Millimeter Wave Communications
Authors:
Yunchou Xing,
Ojas Kanhere,
Shihao Ju,
Theodore S. Rappaport,
George R. MacCartney Jr
Abstract:
This article presents measurement guidelines and verification procedures for antenna cross-polarization discrimination (XPD) and penetration loss measurements for millimeter wave (mmWave) channel sounder systems. These techniques are needed to ensure accurate and consistent measurements by different researchers at different frequencies and bandwidths. Measurements at 73 GHz are used to demonstrate…
▽ More
This article presents measurement guidelines and verification procedures for antenna cross-polarization discrimination (XPD) and penetration loss measurements for millimeter wave (mmWave) channel sounder systems. These techniques are needed to ensure accurate and consistent measurements by different researchers at different frequencies and bandwidths. Measurements at 73 GHz are used to demonstrate and verify the guidelines, and show the consistency of the antenna XPD factor and the penetration loss at different transmitter-receiver (T-R) separation distances, thus providing a systematic method that may be used at any frequency for reliable field measurements.
△ Less
Submitted 11 July, 2018;
originally announced July 2018.
-
Hybrid Beamforming for 5G Millimeter-Wave Multi-Cell Networks
Authors:
Shu Sun,
Theodore S. Rappaport,
Mansoor Shafi
Abstract:
Multi-cell wireless systems usually suffer both intra-cell and inter-cell interference, which can be mitigated via coordinated multipoint (CoMP) techniques. Previous works on multi-cell analysis for the microwave band generally consider fully digital beamforming that requires a complete radio-frequency chain behind each antenna, which is less practical for millimeter-wave (mmWave) systems where la…
▽ More
Multi-cell wireless systems usually suffer both intra-cell and inter-cell interference, which can be mitigated via coordinated multipoint (CoMP) techniques. Previous works on multi-cell analysis for the microwave band generally consider fully digital beamforming that requires a complete radio-frequency chain behind each antenna, which is less practical for millimeter-wave (mmWave) systems where large amounts of antennas are necessary to provide sufficient beamforming gain and to enable transmission and reception of multiple data streams per user. This paper proposes four analog and digital hybrid beamforming schemes for multi-cell multi-user multi-stream mmWave communication, leveraging CoMP. Spectral efficiency performances of the proposed hybrid beamforming approaches are investigated and compared using both the 3rd Generation Partnership Project and NYUSIM channel models. Simulation results show that CoMP based on maximizing signal-to-leakage-plus-noise ratio can improve spectral efficiency as compared to the no-coordination case, and spectral efficiency gaps between different beamforming approaches depend on the interference level that is influenced by the cell radius and the number of users per cell.
△ Less
Submitted 11 March, 2018;
originally announced March 2018.
-
Base Station Diversity Propagation Measurements at 73 GHz Millimeter-Wave for 5G Coordinated Multipoint (CoMP) Analysis
Authors:
George R. MacCartney Jr.,
Theodore S. Rappaport,
Amitava Ghosh
Abstract:
This paper describes wideband (1 GHz) base station diversity and coordinated multipoint (CoMP)-style large-scale measurements at 73 GHz in an urban microcell open square scenario in downtown Brooklyn, New York on the NYU campus. The measurements consisted of ten random receiver locations at pedestrian level (1.4 meters) and ten random transmitter locations at lamppost level (4.0 meters) that provi…
▽ More
This paper describes wideband (1 GHz) base station diversity and coordinated multipoint (CoMP)-style large-scale measurements at 73 GHz in an urban microcell open square scenario in downtown Brooklyn, New York on the NYU campus. The measurements consisted of ten random receiver locations at pedestrian level (1.4 meters) and ten random transmitter locations at lamppost level (4.0 meters) that provided 36 individual transmitter-receiver (TX-RX) combinations. For each of the 36 radio links, extensive directional measurements were made to give insights into small-cell base station diversity at millimeter-wave (mmWave) bands. High-gain steerable horn antennas with 7-degree and 15-degree half-power beamwidths (HPBW) were used at the transmitter (TX) and receiver (RX), respectively. For each TX-RX combination, the TX antenna was scanned over a 120-degree sector and the RX antenna was scanned over the entire azimuth plane at the strongest RX elevation plane and two other elevation planes on both sides of the strongest elevation angle, separated by the 15-degree HPBW. Directional and omnidirectional path loss models were derived and match well with the literature. Signal reception probabilities derived from the measurements for one to five base stations that served a single RX location show significant coverage improvement over all potential beamformed RX antenna pointing angles. CDFs for nearest neighbor and Best-N omnidirectional path loss and cell outage probabilities for directional antennas provide insights into coverage and interference for future mmWave small-cells that will exploit macro-diversity and CoMP.
△ Less
Submitted 10 October, 2017;
originally announced October 2017.
-
Rapid Fading Due to Human Blockage in Pedestrian Crowds at 5G Millimeter-Wave Frequencies
Authors:
George R. MacCartney Jr.,
Theodore S. Rappaport,
Sundeep Rangan
Abstract:
Rapidly fading channels caused by pedestrians in dense urban environments will have a significant impact on millimeter-wave (mmWave) communications systems that employ electrically-steerable and narrow beamwidth antenna arrays. A peer-to-peer (P2P) measurement campaign was conducted with 7-degree, 15-degree, and 60-degree half-power beamwidth (HPBW) antenna pairs at 73.5 GHz and with 1 GHz of RF n…
▽ More
Rapidly fading channels caused by pedestrians in dense urban environments will have a significant impact on millimeter-wave (mmWave) communications systems that employ electrically-steerable and narrow beamwidth antenna arrays. A peer-to-peer (P2P) measurement campaign was conducted with 7-degree, 15-degree, and 60-degree half-power beamwidth (HPBW) antenna pairs at 73.5 GHz and with 1 GHz of RF null-to-null bandwidth in a heavily populated open square scenario in Brooklyn, New York, to study blockage events caused by typical pedestrian traffic. Antenna beamwidths that range approximately an order of magnitude were selected to gain knowledge of fading events for antennas with different beamwidths since antenna patterns for mmWave systems will be electronically-adjustable. Two simple modeling approaches in the literature are introduced to characterize the blockage events by either a two-state Markov model or a four-state piecewise linear modeling approach. Transition probability rates are determined from the measurements and it is shown that average fade durations with a -5 dB threshold are 299.0 ms for 7-degree HPBW antennas and 260.2 ms for 60-degree HPBW antennas. The four-state piecewise linear modeling approach shows that signal strength decay and rise times are asymmetric for blockage events and that mean signal attenuations (average fade depths) are inversely proportional to antenna HPBW, where 7-degree and 60-degree HPBW antennas resulted in mean signal fades of 15.8 dB and 11.5 dB, respectively. The models presented herein are valuable for extending statistical channel models at mmWave to accurately simulate real-world pedestrian blockage events when designing fifth-generation (5G) wireless systems.
△ Less
Submitted 7 November, 2017; v1 submitted 18 September, 2017;
originally announced September 2017.
-
Overview of Millimeter Wave Communications for Fifth-Generation (5G) Wireless Networks-with a focus on Propagation Models
Authors:
Theodore S. Rappaport,
Yunchou Xing,
George R. MacCartney, Jr.,
Andreas F. Molisch,
Evangelos Mellios,
Jianhua Zhang
Abstract:
This paper provides an overview of the features of fifth generation (5G) wireless communication systems now being developed for use in the millimeter wave (mmWave) frequency bands. Early results and key concepts of 5G networks are presented, and the channel modeling efforts of many international groups for both licensed and unlicensed applications are described here. Propagation parameters and cha…
▽ More
This paper provides an overview of the features of fifth generation (5G) wireless communication systems now being developed for use in the millimeter wave (mmWave) frequency bands. Early results and key concepts of 5G networks are presented, and the channel modeling efforts of many international groups for both licensed and unlicensed applications are described here. Propagation parameters and channel models for understanding mmWave propagation, such as line-of-sight (LOS) probabilities, large-scale path loss, and building penetration loss, as modeled by various standardization bodies, are compared over the 0.5-100 GHz range.
△ Less
Submitted 24 July, 2017;
originally announced August 2017.
-
Small-Scale, Local Area, and Transitional Millimeter Wave Propagation for 5G Communications
Authors:
Theodore S. Rappaport,
George R. MacCartney Jr.,
Shu Sun,
Hangsong Yan,
Sijia Deng
Abstract:
This paper studies radio propagation mechanisms that impact handoffs, air interface design, beam steering, and MIMO for 5G mobile communication systems. Knife edge diffraction (KED) and a creeping wave linear model are shown to predict diffraction loss around typical building objects from 10 to 26 GHz, and human blockage measurements at 73 GHz are shown to fit a double knife-edge diffraction (DKED…
▽ More
This paper studies radio propagation mechanisms that impact handoffs, air interface design, beam steering, and MIMO for 5G mobile communication systems. Knife edge diffraction (KED) and a creeping wave linear model are shown to predict diffraction loss around typical building objects from 10 to 26 GHz, and human blockage measurements at 73 GHz are shown to fit a double knife-edge diffraction (DKED) model which incorporates antenna gains. Small-scale spatial fading of millimeter wave received signal voltage amplitude is generally Ricean-distributed for both omnidirectional and directional receive antenna patterns under both line-of-sight (LOS) and non-line-of-sight (NLOS) conditions in most cases, although the log-normal distribution fits measured data better for the omnidirectional receive antenna pattern in the NLOS environment. Small-scale spatial autocorrelations of received voltage amplitudes are shown to fit sinusoidal exponential and exponential functions for LOS and NLOS environments, respectively, with small decorrelation distances of 0.27 cm to 13.6 cm (smaller than the size of a handset) that are favorable for spatial multiplexing. Local area measurements using cluster and route scenarios show how the received signal changes as the mobile moves and transitions from LOS to NLOS locations, with reasonably stationary signal levels within clusters. Wideband mmWave power levels are shown to fade from 0.4 dB/ms to 40 dB/s, depending on travel speed and surroundings.
△ Less
Submitted 15 August, 2017; v1 submitted 25 July, 2017;
originally announced July 2017.
-
Investigation and Comparison of 3GPP and NYUSIM Channel Models for 5G Wireless Communications
Authors:
Theodore S. Rappaport,
Shu Sun,
Mansoor Shafi
Abstract:
Channel models describe how wireless channel parameters behave in a given scenario, and help evaluate link- and system-level performance. A proper channel model should be able to faithfully reproduce the channel parameters obtained in field measurements and accurately predict the spatial and temporal channel impulse response along with large-scale fading. This paper compares two popular channel mo…
▽ More
Channel models describe how wireless channel parameters behave in a given scenario, and help evaluate link- and system-level performance. A proper channel model should be able to faithfully reproduce the channel parameters obtained in field measurements and accurately predict the spatial and temporal channel impulse response along with large-scale fading. This paper compares two popular channel models for next generation wireless communications: the 3rd Generation Partnership Project (3GPP) TR 38.900 Release 14 channel model and the statistical spatial channel model NYUSIM developed by New York University (NYU). The two channel models employ different modeling approaches in many aspects, such as the line-of-sight probability, path loss, and clustering methodology. Simulations are performed using the two channel models to analyze the channel eigenvalue distribution and spectral efficiency leveraging the analog/digital hybrid beamforming methods found in the literature. Simulation results show that the 3GPP model produces different eigenvalue and spectral efficiency distributions for mmWave bands, as compared to the outcome from NYUSIM that is based on massive amounts of real-world measured data in New York City. This work shows NYUSIM is more accurate for realistic simulations than 3GPP in urban environments.
△ Less
Submitted 10 July, 2017; v1 submitted 2 July, 2017;
originally announced July 2017.
-
Study on 3GPP Rural Macrocell Path Loss Models for Millimeter Wave Wireless Communications
Authors:
George R. MacCartney Jr.,
Theodore S. Rappaport
Abstract:
Little research has been done to reliably model millimeter wave (mmWave) path loss in rural macrocell settings, yet, models have been hastily adopted without substantial empirical evidence. This paper studies past rural macrocell (RMa) path loss models and exposes concerns with the current 3rd Generation Partnership Project (3GPP) TR 38.900 (Release 14) RMa path loss models adopted from the Intern…
▽ More
Little research has been done to reliably model millimeter wave (mmWave) path loss in rural macrocell settings, yet, models have been hastily adopted without substantial empirical evidence. This paper studies past rural macrocell (RMa) path loss models and exposes concerns with the current 3rd Generation Partnership Project (3GPP) TR 38.900 (Release 14) RMa path loss models adopted from the International Telecommunications Union - Radiocommunications (ITU-R) Sector. This paper shows how the 3GPP RMa large-scale path loss models were derived for frequencies below 6 GHz, yet they are being asserted for use up to 30 GHz, even though there has not been sufficient work or published data to support their validity at frequencies above 6 GHz or in the mmWave bands. We present the background of the 3GPP RMa path loss models and their use of odd correction factors not suitable for rural scenarios, and show that the multi-frequency close-in free space reference distance (CI) path loss model is more accurate and reliable than current 3GPP and ITU-R RMa models. Using field data and simulations, we introduce a new close-in free space reference distance with height dependent path loss exponent model (CIH), that predicts rural macrocell path loss using an effective path loss exponent that is a function of base station antenna height. This work shows the CI and CIH models can be used from 500 MHz to 100 GHz for rural mmWave coverage and interference analysis, without any discontinuity at 6 GHz as exists in today's 3GPP and ITU-R RMa models.
△ Less
Submitted 29 March, 2017;
originally announced March 2017.
-
Millimeter Wave Small-Scale Spatial Statistics in an Urban Microcell Scenario
Authors:
Shu Sun,
Hangsong Yan,
George R. MacCartney Jr.,
Theodore S. Rappaport
Abstract:
This paper presents outdoor wideband small-scale spatial fading and autocorrelation measurements and results in the 73 GHz millimeter-wave (mmWave) band conducted in downtown Brooklyn, New York. Both directional and omnidirectional receiver (RX) antennas are studied. Two pairs of transmitter (TX) and RX locations were tested with one line-of-sight (LOS) and one non-line-of-sight (NLOS) environment…
▽ More
This paper presents outdoor wideband small-scale spatial fading and autocorrelation measurements and results in the 73 GHz millimeter-wave (mmWave) band conducted in downtown Brooklyn, New York. Both directional and omnidirectional receiver (RX) antennas are studied. Two pairs of transmitter (TX) and RX locations were tested with one line-of-sight (LOS) and one non-line-of-sight (NLOS) environment, where a linear track was employed at each RX to move the antenna in half-wavelength increments. Measured data reveal that the small-scale spatial fading of the received signal voltage amplitude are generally Ricean-distributed for both omnidirectional and directional RX antenna patterns under both LOS and NLOS conditions in most cases, except for the log-normal distribution for the omnidirectional RX antenna pattern in the NLOS environment. Sinusoidal exponential and typical exponential functions are found to model small-scale spatial autocorrelation of the received signal voltage amplitude in LOS and NLOS environments in most cases, respectively. Furthermore, different decorrelation distances were observed for different RX track orientations, i.e., for different directions of motion relative to the TX. Results herein are valuable for characterizing small-scale spatial fading and autocorrelation properties in multiple-input multiple-output (MIMO) systems for fifth-generation (5G) mmWave frequencies.
△ Less
Submitted 31 March, 2017; v1 submitted 23 March, 2017;
originally announced March 2017.
-
A Novel Millimeter-Wave Channel Simulator and Applications for 5G Wireless Communications
Authors:
Shu Sun,
George R. MacCartney Jr.,
Theodore S. Rappaport
Abstract:
This paper presents details and applications of a novel channel simulation software named NYUSIM, which can be used to generate realistic temporal and spatial channel responses to support realistic physical- and link-layer simulations and design for fifth-generation (5G) cellular communications. NYUSIM is built upon the statistical spatial channel model for broadband millimeter-wave (mmWave) wirel…
▽ More
This paper presents details and applications of a novel channel simulation software named NYUSIM, which can be used to generate realistic temporal and spatial channel responses to support realistic physical- and link-layer simulations and design for fifth-generation (5G) cellular communications. NYUSIM is built upon the statistical spatial channel model for broadband millimeter-wave (mmWave) wireless communication systems developed by researchers at New York University (NYU). The simulator is applicable for a wide range of carrier frequencies (500 MHz to 100 GHz), radio frequency (RF) bandwidths (0 to 800 MHz), antenna beamwidths (7 to 360 degrees for azimuth and 7 to 45 degrees for elevation), and operating scenarios (urban microcell, urban macrocell, and rural macrocell), and also incorporates multiple-input multiple-output (MIMO) antenna arrays at the transmitter and receiver. This paper also provides examples to demonstrate how to use NYUSIM for analyzing MIMO channel conditions and spectral efficiencies, which show that NYUSIM is an alternative and more realistic channel model compared to the 3rd Generation Partnership Project (3GPP) and other channel models for mmWave bands.
△ Less
Submitted 31 March, 2017; v1 submitted 23 March, 2017;
originally announced March 2017.
-
Millimeter Wave MIMO Channel Estimation Based on Adaptive Compressed Sensing
Authors:
Shu Sun,
Theodore S. Rappaport
Abstract:
Multiple-input multiple-output (MIMO) systems are well suited for millimeter-wave (mmWave) wireless communications where large antenna arrays can be integrated in small form factors due to tiny wavelengths, thereby providing high array gains while supporting spatial multiplexing, beamforming, or antenna diversity. It has been shown that mmWave channels exhibit sparsity due to the limited number of…
▽ More
Multiple-input multiple-output (MIMO) systems are well suited for millimeter-wave (mmWave) wireless communications where large antenna arrays can be integrated in small form factors due to tiny wavelengths, thereby providing high array gains while supporting spatial multiplexing, beamforming, or antenna diversity. It has been shown that mmWave channels exhibit sparsity due to the limited number of dominant propagation paths, thus compressed sensing techniques can be leveraged to conduct channel estimation at mmWave frequencies. This paper presents a novel approach of constructing beamforming dictionary matrices for sparse channel estimation using the continuous basis pursuit (CBP) concept, and proposes two novel low-complexity algorithms to exploit channel sparsity for adaptively estimating multipath channel parameters in mmWave channels. We verify the performance of the proposed CBP-based beamforming dictionary and the two algorithms using a simulator built upon a three-dimensional mmWave statistical spatial channel model, NYUSIM, that is based on real-world propagation measurements. Simulation results show that the CBP-based dictionary offers substantially higher estimation accuracy and greater spectral efficiency than the grid-based counterpart introduced by previous researchers, and the algorithms proposed here render better performance but require less computational effort compared with existing algorithms.
△ Less
Submitted 31 March, 2017; v1 submitted 23 March, 2017;
originally announced March 2017.
-
A Flexible Wideband Millimeter-Wave Channel Sounder with Local Area and NLOS to LOS Transition Measurements
Authors:
George R. MacCartney Jr.,
Hangsong Yan,
Shu Sun,
Theodore S. Rappaport
Abstract:
This paper presents a millimeter-wave (mmWave) wideband sliding correlator channel sounder with flexibility to operate at various transmission rates. The channel sounder can transmit and receive up to 1 GHz of RF null-to-null bandwidth while measuring a 2 nanosecond multipath time resolution. The system architecture takes advantage of field-programmable gate arrays (FPGAs), high-speed digital-to-a…
▽ More
This paper presents a millimeter-wave (mmWave) wideband sliding correlator channel sounder with flexibility to operate at various transmission rates. The channel sounder can transmit and receive up to 1 GHz of RF null-to-null bandwidth while measuring a 2 nanosecond multipath time resolution. The system architecture takes advantage of field-programmable gate arrays (FPGAs), high-speed digital-to-analog converters (DACs), and low phase noise Rubidium (Rb) references for synchronization. Using steerable narrowbeam antennas, the system can measure up to 185 dB of path loss. The channel sounder is used to measure the directional and omnidirectional received power as a receiver transitions from line-of-sight to non-line-of-sight conditions down an urban canyon. A 25 dB drop in omnidirectional received power was observed as the receiver transitioned from line-of-sight (LOS) conditions to deeply shadowed non-LOS (NLOS) conditions. The channel sounder was also used to study signal variation and spatial consistency for a local set of receiver locations arranged in a cluster spanning a 5 m x 10 m local area, where the omnidirectional received power in LOS and NLOS environments is found to be relatively stable with standard deviations of received power of 2.2 dB and 4.3 dB, respectively. This work shows that when implementing beamforming at the transmitter at mmWave, the omnidirectional received power over a local area has little fluctuation among receiver locations separated by a few to several meters.
△ Less
Submitted 23 March, 2017;
originally announced March 2017.
-
Indoor Office Wideband Penetration Loss Measurements at 73 GHz
Authors:
Jacqueline Ryan,
George R. MacCartney Jr.,
Theodore S. Rappaport
Abstract:
This paper presents millimeter wave (mmWave) penetration loss measurements and analysis at 73 GHz using a wideband sliding correlator channel sounder in an indoor office environment. Penetration loss was measured using a carefully controlled measurement setup for many common indoor building materials such as glass doors, glass windows, closet doors, steel doors, and whiteboard writing walls. Measu…
▽ More
This paper presents millimeter wave (mmWave) penetration loss measurements and analysis at 73 GHz using a wideband sliding correlator channel sounder in an indoor office environment. Penetration loss was measured using a carefully controlled measurement setup for many common indoor building materials such as glass doors, glass windows, closet doors, steel doors, and whiteboard writing walls. Measurements were conducted using narrowbeam transmitter (TX) and receiver (RX) horn antennas that were boresight-aligned with a test material between the antennas. Overall, 21 different locations were measured for 6 different materials such that the same type of material was tested in at least two locations in order to characterize the effect of penetration loss for materials with similar composition. As shown here, attenuation through common materials ranged between 0.8 dB/cm and 9.9 dB/cm for co-polarized antennas, while cross-polarized antennas exhibited similar attenuation for most materials, but up to 23.4 dB/cm of attenuation for others. The penetration loss results presented here are useful for site-specific planning tools that will model indoor mmWave networks, without the need for expensive measurement campaigns.
△ Less
Submitted 30 May, 2017; v1 submitted 23 March, 2017;
originally announced March 2017.
-
Millimeter Wave Wireless Communications: New Results for Rural Connectivity
Authors:
George R. MacCartney Jr.,
Shu Sun,
Theodore S. Rappaport,
Yunchou Xing,
Hangsong Yan,
Jeton Koka,
Ruichen Wang,
Dian Yu
Abstract:
This paper shows the remarkable distances that can be achieved using millimeter wave communications, and presents a new rural macrocell (RMa) path loss model for millimeter wave frequencies, based on measurements at 73 GHz in rural Virginia. Path loss models are needed to estimate signal coverage and interference for wireless network design, yet little is known about rural propagation at millimete…
▽ More
This paper shows the remarkable distances that can be achieved using millimeter wave communications, and presents a new rural macrocell (RMa) path loss model for millimeter wave frequencies, based on measurements at 73 GHz in rural Virginia. Path loss models are needed to estimate signal coverage and interference for wireless network design, yet little is known about rural propagation at millimeter waves. This work identifies problems with the RMa model used by the 3rd Generation Partnership Project (3GPP) TR 38.900 Release 14, and offers a close-in (CI) reference distance model that has improved accuracy, fewer parameters, and better stability as compared with the existing 3GPP RMa path loss model. The measurements and models presented here are the first to validate rural millimeter wave path loss models.
△ Less
Submitted 18 August, 2016; v1 submitted 18 August, 2016;
originally announced August 2016.
-
Millimeter-Wave Human Blockage at 73 GHz with a Simple Double Knife-Edge Diffraction Model and Extension for Directional Antennas
Authors:
George R. MacCartney Jr.,
Sijia Deng,
Shu Sun,
Theodore S. Rappaport
Abstract:
This paper presents 73 GHz human blockage measurements for a point-to-point link with a 5 m transmitter-receiver separation distance in an indoor environment, with a human that walked at a speed of approximately 1 m/s at a perpendicular orientation to the line between the transmitter and receiver, at various distances between them. The experiment measures the shadowing effect of a moving human bod…
▽ More
This paper presents 73 GHz human blockage measurements for a point-to-point link with a 5 m transmitter-receiver separation distance in an indoor environment, with a human that walked at a speed of approximately 1 m/s at a perpendicular orientation to the line between the transmitter and receiver, at various distances between them. The experiment measures the shadowing effect of a moving human body when using directional antennas at the transmitter and receiver for millimeter-wave radio communications. The measurements were conducted using a 500 Megachips-per-second wideband correlator channel sounder with a 1 GHz first null-to-null RF bandwidth. Results indicate high shadowing attenuation is not just due to the human blocker but also is due to the static directional nature of the antennas used, leading to the need for phased-array antennas to switch beam directions in the presence of obstructions and blockages at millimeter-waves. A simple model for human blockage is provided based on the double knife-edge diffraction (DKED) model where humans are approximated by a rectangular screen with infinite vertical height, similar to the human blockage model given by the METIS project.
△ Less
Submitted 14 September, 2016; v1 submitted 1 July, 2016;
originally announced July 2016.
-
Investigation of Prediction Accuracy, Sensitivity, and Parameter Stability of Large-Scale Propagation Path Loss Models for 5G Wireless Communications
Authors:
Shu Sun,
Theodore S. Rappaport,
Timothy A. Thomas,
Amitava Ghosh,
Huan C. Nguyen,
Istvan Z. Kovacs,
Ignacio Rodriguez,
Ozge Koymen,
Andrzej Partyka
Abstract:
This paper compares three candidate large-scale propagation path loss models for use over the entire microwave and millimeter-wave (mmWave) radio spectrum: the alpha-beta-gamma (ABG) model, the close-in (CI) free space reference distance model, and the CI model with a frequency-weighted path loss exponent (CIF). Each of these models have been recently studied for use in standards bodies such as 3G…
▽ More
This paper compares three candidate large-scale propagation path loss models for use over the entire microwave and millimeter-wave (mmWave) radio spectrum: the alpha-beta-gamma (ABG) model, the close-in (CI) free space reference distance model, and the CI model with a frequency-weighted path loss exponent (CIF). Each of these models have been recently studied for use in standards bodies such as 3GPP, and for use in the design of fifth generation (5G) wireless systems in urban macrocell, urban microcell, and indoor office and shopping mall scenarios. Here we compare the accuracy and sensitivity of these models using measured data from 30 propagation measurement datasets from 2 GHz to 73 GHz over distances ranging from 4 m to 1238 m. A series of sensitivity analyses of the three models show that the physically-based two-parameter CI model and three-parameter CIF model offer computational simplicity, have very similar goodness of fit (i.e., the shadow fading standard deviation), exhibit more stable model parameter behavior across frequencies and distances, and yield smaller prediction error in sensitivity testing across distances and frequencies, when compared to the four-parameter ABG model. Results show the CI model with a 1 m close-in reference distance is suitable for outdoor environments, while the CIF model is more appropriate for indoor modeling. The CI and CIF models are easily implemented in existing 3GPP models by making a very subtle modification -- by replacing a floating non-physically based constant with a frequency-dependent constant that represents free space path loss in the first meter of propagation.
△ Less
Submitted 10 June, 2016; v1 submitted 14 March, 2016;
originally announced March 2016.