-
Learning-Based One-Bit Maximum Likelihood Detection for Massive MIMO Systems: Dithering-Aided Adaptive Approach
Authors:
Yunseong Cho,
Jinseok Choi,
Brian L. Evans
Abstract:
In this paper, we propose a learning-based detection framework for uplink massive multiple-input and multiple-output (MIMO) systems with one-bit analog-to-digital converters. The learning-based detection only requires counting the occurrences of the quantized outputs of -1 and +1 for estimating a likelihood probability at each antenna. Accordingly, the key advantage of this approach is to perform…
▽ More
In this paper, we propose a learning-based detection framework for uplink massive multiple-input and multiple-output (MIMO) systems with one-bit analog-to-digital converters. The learning-based detection only requires counting the occurrences of the quantized outputs of -1 and +1 for estimating a likelihood probability at each antenna. Accordingly, the key advantage of this approach is to perform maximum likelihood detection without explicit channel estimation which has been one of the primary challenges of one-bit quantized systems. However, due to the quasi-deterministic reception in the high signal-to-noise ratio (SNR) regime, one-bit observations in the high SNR regime are biased to either +1 or -1, and thus, the learning requires excessive training to estimate the small likelihood probabilities. To address this drawback, we propose a dither-and-learning technique to estimate likelihood functions from dithered signals. First, we add a dithering signal to artificially decrease the SNR and then infer the likelihood function from the quantized dithered signals by using an SNR estimate derived from a deep neural network-based estimator which is trained offline. We extend our technique by developing an adaptive dither-and-learning method that updates the dithering power according to the patterns observed in the quantized dithered signals. The proposed framework is also applied to channel-coded MIMO systems by computing a bit-wise and user-wise log-likelihood ratio from the refined likelihood probabilities. Simulation results validate the performance of the proposed methods in both uncoded and coded systems.
△ Less
Submitted 21 March, 2024; v1 submitted 16 April, 2023;
originally announced April 2023.
-
Adaptive Learning-Based Detection for One-Bit Quantized Massive MIMO Systems
Authors:
Yunseong Cho,
Jinseok Choi,
Brian L. Evans
Abstract:
We propose an adaptive learning-based framework for uplink massive multiple-input multiple-output (MIMO) systems with one-bit analog-to-digital converters. Learning-based detection does not need to estimate channels, which overcomes a key drawback in one-bit quantized systems. During training, learning-based detection suffers at high signal-to-noise ratio (SNR) because observations will be biased…
▽ More
We propose an adaptive learning-based framework for uplink massive multiple-input multiple-output (MIMO) systems with one-bit analog-to-digital converters. Learning-based detection does not need to estimate channels, which overcomes a key drawback in one-bit quantized systems. During training, learning-based detection suffers at high signal-to-noise ratio (SNR) because observations will be biased to +1 or -1 which leads to many zero-valued empirical likelihood functions. At low SNR, observations vary frequently in value but the high noise power makes capturing the effect of the channel difficult. To address these drawbacks, we propose an adaptive dithering-and-learning method. During training, received values are mixed with dithering noise whose statistics are known to the base station, and the dithering noise power is updated for each antenna element depending on the observed pattern of the output. We then use the refined probabilities in the one-bit maximum likelihood detection rule. Simulation results validate the detection performance of the proposed method vs. our previous method using fixed dithering noise power as well as zero-forcing and optimal ML detection both of which assume perfect channel knowledge.
△ Less
Submitted 13 November, 2022;
originally announced November 2022.
-
Low Complexity Hybrid Beamforming for mmWave Full-Duplex Integrated Access and Backhaul
Authors:
Elyes Balti,
Chris Dick,
Brian L. Evans
Abstract:
We consider an integrated access and backhaul (IAB) node operating in full-duplex (FD) mode. We analyze simultaneous transmission from the New Radio gNB to the IAB node on the backhaul uplink, IAB node to a user equipment (UE) on the access downlink, and IAB transmitter to the IAB receiver on the self-interference (SI) channel. Our contributions include (1) a low complexity algorithm to jointly de…
▽ More
We consider an integrated access and backhaul (IAB) node operating in full-duplex (FD) mode. We analyze simultaneous transmission from the New Radio gNB to the IAB node on the backhaul uplink, IAB node to a user equipment (UE) on the access downlink, and IAB transmitter to the IAB receiver on the self-interference (SI) channel. Our contributions include (1) a low complexity algorithm to jointly design the hybrid analog/digital beamformers for all three nodes to maximize the sum spectral efficiency of the access and backhaul links by canceling SI and maximizing received power; (2) derivation of all-digital beamforming and spectral efficiency upper bound for use in benchmarking; and (3) simulations to compare full vs. half duplex modes, hybrid vs. all-digital beamforming algorithms, proposed hybrid vs. conventional beamforming algorithms, and spectral efficiency upper bound. In simulations, the proposed algorithm shows significant reduction in SI power and increase in sum spectral efficiency.
△ Less
Submitted 5 September, 2022;
originally announced September 2022.
-
Coordinated Per-Antenna Power Minimization for Multicell Massive MIMO Systems with Low-Resolution Data Converters
Authors:
Yunseong Cho,
Jinseok Choi,
Brian L. Evans
Abstract:
A multicell-coordinated beamforming solution for massive multiple-input multiple-output orthogonal frequency-division multiplexing (OFDM) systems is presented when employing low-resolution data converters and per-antenna level constraints. For a more realistic deployment, we aim to find the downlink (DL) beamformer that minimizes the maximum power on transmit antenna array of each basestation unde…
▽ More
A multicell-coordinated beamforming solution for massive multiple-input multiple-output orthogonal frequency-division multiplexing (OFDM) systems is presented when employing low-resolution data converters and per-antenna level constraints. For a more realistic deployment, we aim to find the downlink (DL) beamformer that minimizes the maximum power on transmit antenna array of each basestation under received signal quality constraints while minimizing per-antenna transmit power. We show that strong duality holds between the primal DL formulation and its manageable Lagrangian dual problem which can be interpreted as the virtual uplink (UL) problem with adjustable noise covariance matrices. For a fixed set of noise covariance matrices, we claim that the virtual UL solution is effectively used to compute the DL beamformer and noise covariance matrices can be subsequently updated with an associated subgradient. Our primary contributions are then (1) formulating the quantized DL OFDM antenna power minimax problem and deriving its associated dual problem, (2) showing strong duality and interpreting the dual as a virtual quantized UL OFDM problem, and (3) developing an iterative minimax algorithm based on the dual problem. Simulations validate the proposed algorithm in terms of the maximum antenna transmit power and peak-to-average-power ratio.
△ Less
Submitted 10 September, 2023; v1 submitted 8 August, 2022;
originally announced August 2022.
-
Reverse Link Analysis for Full-Duplex Cellular Networks with Low Resolution ADC/DAC
Authors:
Elyes Balti,
Brian L. Evans
Abstract:
In this work, we consider a full-duplex (FD) massive multiple-input multiple-output (MIMO) cellular network with low-resolution analog-to-digital converters (ADCs) and digital-to-analog converter (DACs). Our first contribution is to provide a unified framework for reverse link (uplink) analysis where matched filters are applied at the FD base stations (BSs) under channel hardening. Second, we deri…
▽ More
In this work, we consider a full-duplex (FD) massive multiple-input multiple-output (MIMO) cellular network with low-resolution analog-to-digital converters (ADCs) and digital-to-analog converter (DACs). Our first contribution is to provide a unified framework for reverse link (uplink) analysis where matched filters are applied at the FD base stations (BSs) under channel hardening. Second, we derive the expressions of the signal-to-quantization-plus-interference-plus-noise ratio (SQINR) for general and special cases. Finally, we quantify effects of quantization error, pilot contamination, and full duplexing for a hexagonal cell lattice on spectral efficiency and cumulative distribution function (CDF) to show that FD outperforms half duplex (HD) in a wide variety of scenarios.
△ Less
Submitted 18 May, 2022; v1 submitted 28 March, 2022;
originally announced March 2022.
-
Forward Link Analysis for Full-Duplex Cellular Networks with Low Resolution ADC/DAC
Authors:
Elyes Balti,
Brian L. Evans
Abstract:
In this work, we consider a full-duplex (FD) massive multiple-input multiple-output (MIMO) cellular network with low resolution analog-to-digital converters (ADCs) and digital-to-analog converters (DACs). Our first contribution is to propose a unified framework for forward link analysis where matched filter precoders are applied at the FD base stations (BSs) under channel hardening. Second, we der…
▽ More
In this work, we consider a full-duplex (FD) massive multiple-input multiple-output (MIMO) cellular network with low resolution analog-to-digital converters (ADCs) and digital-to-analog converters (DACs). Our first contribution is to propose a unified framework for forward link analysis where matched filter precoders are applied at the FD base stations (BSs) under channel hardening. Second, we derive expressions for the signal-to-quantization-plus-interference-plus-noise ratio (SQINR) for general and special cases. Finally, we quantify effects of quantization error, pilot contamination, and full duplexing for a hexagonal cell lattice on spectral efficiency and cumulative distribution function (CDF) to show that FD outperforms half duplex (HD) in a wide variety of scenarios.
△ Less
Submitted 18 May, 2022; v1 submitted 7 March, 2022;
originally announced March 2022.
-
Full-Duplex Wideband mmWave Integrated Access and Backhaul with Low Resolution ADCs
Authors:
Elyes Balti,
Brian L. Evans
Abstract:
We consider a wideband integrated access and backhaul system operating in full-duplex mode between the New Radio gNB donor and single user equipment. Due to high power consumption in millimeter wave systems, we use low-resolution analog-to-digital converters (ADCs) in the receivers. Our contributions include (1) hybrid beamformer to maximize sum spectral efficiency of the access and backhaul links…
▽ More
We consider a wideband integrated access and backhaul system operating in full-duplex mode between the New Radio gNB donor and single user equipment. Due to high power consumption in millimeter wave systems, we use low-resolution analog-to-digital converters (ADCs) in the receivers. Our contributions include (1) hybrid beamformer to maximize sum spectral efficiency of the access and backhaul links by canceling self-interference and maximizing received power; (2) all-digital beamformer and upper bound on sum spectral efficiency; and (3) simulations to compare full vs. half duplex, finite vs. infinite ADC resolution, hybrid vs. all-digital beamforming, and the upper bound in spectral efficiency.
△ Less
Submitted 6 February, 2022; v1 submitted 24 January, 2022;
originally announced February 2022.
-
Spectral Efficiency Optimization for mmWave Wideband MIMO RIS-assisted Communication
Authors:
Pooja Nuti,
Elyes Balti,
Brian L. Evans
Abstract:
Reconfigurable Intelligent Surfaces (RIS) are passive or semi-passive heterogeneous metasurfaces and consist of many tunable elements. RIS is gaining momentum as a promising new technology to enable transforming the propagation environment into controllable parameters. In this paper, we investigate the co-design of per-subcarrier power allocation matrices and multielement RIS phase shifts in downl…
▽ More
Reconfigurable Intelligent Surfaces (RIS) are passive or semi-passive heterogeneous metasurfaces and consist of many tunable elements. RIS is gaining momentum as a promising new technology to enable transforming the propagation environment into controllable parameters. In this paper, we investigate the co-design of per-subcarrier power allocation matrices and multielement RIS phase shifts in downlink wideband MIMO transmission using 28 GHz frequency bands. Our contributions in improving RIS-aided links include (1) enhanced system modeling with pathloss and blockage modeling, and uniform rectangular array (URA) design, (2) design of gradient ascent co-design algorithm, and (3) asymptotic (Big O) complexity analysis of proposed algorithm and runtime complexity evaluation.
△ Less
Submitted 15 December, 2021;
originally announced January 2022.
-
Full-Duplex Massive MIMO Cellular Networks with Low Resolution ADC/DAC
Authors:
Elyes Balti,
Brian L. Evans
Abstract:
In this paper, we provide an analytical framework for full-duplex (FD) massive multiple-input multiple-output (MIMO) cellular networks with low resolution analog-to-digital and digital-to-analog converters (ADCs and DACs). Matched filters are employed at the FD base stations (BSs) at the transmit and receive sides. For both reverse and forward links, our contributions are (1) derivations of the si…
▽ More
In this paper, we provide an analytical framework for full-duplex (FD) massive multiple-input multiple-output (MIMO) cellular networks with low resolution analog-to-digital and digital-to-analog converters (ADCs and DACs). Matched filters are employed at the FD base stations (BSs) at the transmit and receive sides. For both reverse and forward links, our contributions are (1) derivations of the signal-to-quantization-plus-interference-and-noise ratio (SQINR) for general and special cases; (2) derivations of spectral efficiency for asymptotic cases as well as for power scaling laws; and (3) quantifying effects of quantization error, loopback self-interference, and inter-user interference for hexagonal cells and Poisson Point Process (PPP) tessellations on outage probability and spectral efficiency.
△ Less
Submitted 5 September, 2022; v1 submitted 19 November, 2021;
originally announced December 2021.
-
Joint Beamforming and Interference Cancellation in MmWave Wideband Full-Duplex Systems
Authors:
Elyes Balti,
Brian L. Evans
Abstract:
Full-duplex (FD) systems have the capability to transmit and receive at the same time in the same frequency band. FD systems can reduce congestion and latency and improve coverage and spectral efficiency. As a relay, they can increase range and decrease outages. Full-duplex (FD) wireless systems have been emerging as a practical solution to provide high bandwidth, low latency, and big data process…
▽ More
Full-duplex (FD) systems have the capability to transmit and receive at the same time in the same frequency band. FD systems can reduce congestion and latency and improve coverage and spectral efficiency. As a relay, they can increase range and decrease outages. Full-duplex (FD) wireless systems have been emerging as a practical solution to provide high bandwidth, low latency, and big data processing in millimeter wave and Terahertz systems to support cellular networks, autonomous driving, platooning, advanced driving assistance and other systems. However, FD systems suffer from loopback self-interference that can swamp the analog-to-digital converters (ADCs) resulting in very low spectral efficiency. In this context, we consider a cellular system wherein uplink and downlink users independently communicate with FD base station. The proposed contributions are (1) three hybrid beamforming algorithms to cancel self-interference and increase the received power, and (2) evaluation of outage probability, spectral efficiency, and energy efficiency of the proposed algorithms. We consider full-digital beamforming and upper bound as benchmarks. Finally, we show the resiliency of Algorithm 2 against self-interference in comparison with Algorithms 1 and 3, as well as conventional approaches such as beam steering, angle search and singular value decomposition.
△ Less
Submitted 23 October, 2021;
originally announced October 2021.
-
Coordinated Beamforming in Quantized Massive MIMO Systems with Per-Antenna Constraints
Authors:
Yunseong Cho,
Jinseok Choi,
Brian L. Evans
Abstract:
In this work, we present a solution for coordinated beamforming for large-scale downlink (DL) communication systems with low-resolution data converters when employing a per-antenna power constraint that limits the maximum antenna power to alleviate hardware cost. To this end, we formulate and solve the antenna power minimax problem for the coarsely quantized DL system with target signal-to-interfe…
▽ More
In this work, we present a solution for coordinated beamforming for large-scale downlink (DL) communication systems with low-resolution data converters when employing a per-antenna power constraint that limits the maximum antenna power to alleviate hardware cost. To this end, we formulate and solve the antenna power minimax problem for the coarsely quantized DL system with target signal-to-interference-plus-noise ratio requirements. We show that the associated Lagrangian dual with uncertain noise covariance matrices achieves zero duality gap and that the dual solution can be used to obtain the primal DL solution. Using strong duality, we propose an iterative algorithm to determine the optimal dual solution, which is used to compute the optimal DL beamformer. We further update the noise covariance matrices using the optimal DL solution with an associated subgradient and perform projection onto the feasible domain. Through simulation, we evaluate the proposed method in maximum antenna power consumption and peak-to-average power ratio which are directly related to hardware efficiency.
△ Less
Submitted 18 October, 2021;
originally announced October 2021.
-
Hybrid Beamforming Design for Wideband mmWave Full-Duplex Systems
Authors:
Elyes Balti,
Brian L. Evans
Abstract:
Recently, full duplex (FD) has been studied in 5G LTE millimeter wave (mmWave) cellular communications for New Radio in 3GPP releases 15-17. FD allows bidirectional transmission over the same resources and has the potential to reduce latency and double spectral efficiency. Self-interference (SI) is the primary drawback. SI can be several orders of magnitude greater than the received signal power,…
▽ More
Recently, full duplex (FD) has been studied in 5G LTE millimeter wave (mmWave) cellular communications for New Radio in 3GPP releases 15-17. FD allows bidirectional transmission over the same resources and has the potential to reduce latency and double spectral efficiency. Self-interference (SI) is the primary drawback. SI can be several orders of magnitude greater than the received signal power, saturate the analog-to-digital converters (ADCs) and degrade communication performance severely. Massive mmWave antenna arrays may provide enough degrees of freedom for spatial multiplexing and SI suppression. In this paper, we design spatial beamformers for the phased arrays already built into the FD basestation/relay to extend mmWave coverage to a single user. We propose alternating projections to design the precoder and combiner to maximize the sum of the uplink and downlink spectral efficiencies while bringing SI below the noise floor. Our contributions include (1) hybrid analog/digital beamformer design algorithm to cancel SI in the analog domain to avoid ADC saturation and in the digital domain on each subcarrier; (2) full-digital beamformer design algorithm; and (3) analysis of spectral efficiency, energy efficiency and outage probability. In simulation, the proposed algorithms outperform beamsteering, singular value decomposition, angle search, and half-duplex techniques.
△ Less
Submitted 5 February, 2022; v1 submitted 26 May, 2021;
originally announced July 2021.
-
Spectral Efficiency vs Complexity in Downlink Algorithms for Reconfigurable Intelligent Surfaces
Authors:
Pooja Nuti,
Brian L. Evans
Abstract:
Reconfigurable Intelligent Surfaces (RIS) are an emerging technology that can be used to reconfigure the propagation environment to improve cellular communication link rates. RIS, which are thin metasurfaces composed of discrete elements, passively manipulate incident electromagnetic waves through controlled reflective phase tuning. In this paper, we investigate co-design of the multiantenna bases…
▽ More
Reconfigurable Intelligent Surfaces (RIS) are an emerging technology that can be used to reconfigure the propagation environment to improve cellular communication link rates. RIS, which are thin metasurfaces composed of discrete elements, passively manipulate incident electromagnetic waves through controlled reflective phase tuning. In this paper, we investigate co-design of the multiantenna basestation beamforming vector and multielement RIS phase shifts. The downlink narrowband transmission uses sub-6 GHz frequency bands, and the user equipment has a single antenna. Subject to the non-convex constraints due to the RIS phase shifts, we maximize the spectral efficiency or equivalent channel power as a proxy. Our contributions in improving RIS-aided links include (1) design of gradient ascent codesign algorithms, and (2) comparison of seven codesign algorithms in spectral efficiency vs. computational complexity. In simulation, the best spectral efficiency vs. computational complexity tradeoffs are shown by two of our proposed gradient ascent algorithms.
△ Less
Submitted 9 November, 2020;
originally announced November 2020.
-
Coordinated Multicell Beamforming and Power Allocation for Massive MIMO with Low-Resolution ADC/DAC
Authors:
Yunseong Cho,
Jinseok Choi,
Brian L. Evans
Abstract:
In this work, we present a solution for coordinated beamforming and power allocation when base stations employ a massive number of antennas equipped with low-resolution analog-to-digital and digital-to-analog converters. We address total power minimization problems of the coarsely quantized uplink (UL) and downlink (DL) communication systems with target signal-to-interference-plus-noise ratio (SIN…
▽ More
In this work, we present a solution for coordinated beamforming and power allocation when base stations employ a massive number of antennas equipped with low-resolution analog-to-digital and digital-to-analog converters. We address total power minimization problems of the coarsely quantized uplink (UL) and downlink (DL) communication systems with target signal-to-interference-plus-noise ratio (SINR) constraints. By combining the UL problem with minimum mean square error combiners and deriving the Lagrangian dual of the DL problem, we prove UL-DL duality and show there is no duality gap even with coarse data converters. Inspired by strong duality, we devise an iterative algorithm to determine the optimal UL transmit powers, and then linearly amplify the UL combiners with proper weights to acquire the optimal DL precoder. Simulation results validate strong duality and evaluate the proposed method in terms of total power consumption and achieved SINR.
△ Less
Submitted 7 March, 2021; v1 submitted 25 May, 2020;
originally announced May 2020.
-
Quantized Massive MIMO Systems with Multicell Coordinated Beamforming and Power Control
Authors:
Jinseok Choi,
Yunseong Cho,
Brian L. Evans
Abstract:
In this paper, we investigate a coordinated multipoint (CoMP) beamforming and power control problem for base stations (BSs) with a massive number of antenna arrays under coarse quantization at low-resolution analog-to-digital converters (ADCs) and digital-to-analog converter (DACs). Unlike high-resolution ADC and DAC systems, non-negligible quantization noise that needs to be considered in CoMP de…
▽ More
In this paper, we investigate a coordinated multipoint (CoMP) beamforming and power control problem for base stations (BSs) with a massive number of antenna arrays under coarse quantization at low-resolution analog-to-digital converters (ADCs) and digital-to-analog converter (DACs). Unlike high-resolution ADC and DAC systems, non-negligible quantization noise that needs to be considered in CoMP design makes the problem more challenging. We first formulate total power minimization problems of both uplink (UL) and downlink (DL) systems subject to signal-to-interference-and-noise ratio (SINR) constraints. We then derive strong duality for the UL and DL problems under coarse quantization systems. Leveraging the duality, we propose a framework that is directed toward a twofold aim: to discover the optimal transmit powers in UL by developing iterative algorithm in a distributed manner and to obtain the optimal precoder in DL as a scaled instance of UL combiner. Under homogeneous transmit power and SINR constraints per cell, we further derive a deterministic solution for the UL CoMP problem by analyzing the lower bound of the SINR. Lastly, we extend the derived result to wideband orthogonal frequency-division multiplexing systems to optimize transmit power and beamformer for all subcarriers. Simulation results validate the theoretical results and proposed algorithms.
△ Less
Submitted 15 May, 2020;
originally announced May 2020.
-
Compressed-Sensing based Beam Detection in 5G NR Initial Access
Authors:
Junmo Sung,
Brian L. Evans
Abstract:
To support millimeter wave (mmWave) frequency bands in cellular communications, both the base station and the mobile platform utilize large antenna arrays to steer narrow beams towards each other to compensate the path loss and improve communication performance. The time-frequency resource allocated for initial access, however, is limited, which gives rise to need for efficient approaches for beam…
▽ More
To support millimeter wave (mmWave) frequency bands in cellular communications, both the base station and the mobile platform utilize large antenna arrays to steer narrow beams towards each other to compensate the path loss and improve communication performance. The time-frequency resource allocated for initial access, however, is limited, which gives rise to need for efficient approaches for beam detection. For hybrid analog-digital beamforming (HB) architectures, which are used to reduce power consumption, we propose a compressed sensing (CS) based approach for 5G initial access beam detection that is for a HB architecture and that is compliant with the 3GPP standard. The CS-based approach is compared with the exhaustive search in terms of beam detection accuracy and by simulation is shown to outperform. Up to 256 antennas are considered, and the importance of a careful codebook design is reaffirmed.
△ Less
Submitted 2 May, 2020;
originally announced May 2020.
-
Advanced Receiver Architectures for Millimeter Wave Communications with Low-Resolution ADCs
Authors:
Jinseok Choi,
Gilwon Lee,
Ahmed Alkhateeb,
Alan Gatherer,
Naofal Al-Dhahir,
Brian L. Evans
Abstract:
Employing low-resolution analog-to-digital converters (ADCs) for millimeter wave receivers with large antenna arrays provides opportunity to efficiently reduce power consumption of the receiver. Reducing ADC resolution, however, results in performance degradation due to non-negligible quantization error. In addition, the large number of radio frequency (RF) chains is still not desirable. According…
▽ More
Employing low-resolution analog-to-digital converters (ADCs) for millimeter wave receivers with large antenna arrays provides opportunity to efficiently reduce power consumption of the receiver. Reducing ADC resolution, however, results in performance degradation due to non-negligible quantization error. In addition, the large number of radio frequency (RF) chains is still not desirable. Accordingly, conventional low-resolution ADC systems require more efficient designs to minimize the cost and complexity while maximizing performance. In this article, we discuss advanced low-resolution ADC receiver architectures that further improve the spectral and energy efficiency tradeoff. To reduce both the numbers of RF chains and ADC bits, hybrid analog-and-digital beamforming is jointly considered with low-resolution ADCs. We explore the challenges in designing such receivers and present key insights on how the advanced architectures overcome such challenges. As an alternative low-resolution ADC receiver, we also introduce receivers with learning-based detection. The receiver does not require explicit channel estimation, thereby is suitable for one-bit ADC systems. Finally, future challenges and research issues are discussed.
△ Less
Submitted 10 May, 2020; v1 submitted 7 March, 2020;
originally announced March 2020.
-
Deep Learning Predictive Band Switching in Wireless Networks
Authors:
Faris B. Mismar,
Ahmad AlAmmouri,
Ahmed Alkhateeb,
Jeffrey G. Andrews,
Brian L. Evans
Abstract:
In cellular systems, the user equipment (UE) can request a change in the frequency band when its rate drops below a threshold on the current band. The UE is then instructed by the base station (BS) to measure the quality of candidate bands, which requires a measurement gap in the data transmission, thus lowering the data rate. We propose an online-learning based band switching approach that does n…
▽ More
In cellular systems, the user equipment (UE) can request a change in the frequency band when its rate drops below a threshold on the current band. The UE is then instructed by the base station (BS) to measure the quality of candidate bands, which requires a measurement gap in the data transmission, thus lowering the data rate. We propose an online-learning based band switching approach that does not require any measurement gap. Our proposed classifier-based band switching policy instead exploits spatial and spectral correlation between radio frequency signals in different bands based on knowledge of the UE location. We focus on switching between a lower (e.g., 3.5 GHz) band and a millimeter wave band (e.g., 28 GHz), and design and evaluate two classification models that are trained on a ray-tracing dataset. A key insight is that measurement gaps are overkill, in that only the relative order of the bands is necessary for band selection, rather than a full channel estimate. Our proposed machine learning based policies achieve roughly 30% improvement in mean effective rates over those of the industry standard policy, while achieving misclassification errors well below 0.5% and maintaining resilience against blockage uncertainty.
△ Less
Submitted 1 September, 2020; v1 submitted 2 October, 2019;
originally announced October 2019.
-
Base Station Antenna Selection for Low-Resolution ADC Systems
Authors:
Jinseok Choi,
Junmo Sung,
Narayan Prasad,
Xiao-Feng Qi,
Brian L. Evans,
Alan Gatherer
Abstract:
This paper investigates antenna selection at a base station with large antenna arrays and low-resolution analog-to-digital converters. For downlink transmit antenna selection for narrowband channels, we show (1) a selection criterion that maximizes sum rate with zero-forcing precoding equivalent to that of a perfect quantization system; (2) maximum sum rate increases with number of selected antenn…
▽ More
This paper investigates antenna selection at a base station with large antenna arrays and low-resolution analog-to-digital converters. For downlink transmit antenna selection for narrowband channels, we show (1) a selection criterion that maximizes sum rate with zero-forcing precoding equivalent to that of a perfect quantization system; (2) maximum sum rate increases with number of selected antennas; (3) derivation of the sum rate loss function from using a subset of antennas; and (4) unlike high-resolution converter systems, sum rate loss reaches a maximum at a point of total transmit power and decreases beyond that point to converge to zero. For wideband orthogonal-frequency-division-multiplexing (OFDM) systems, our results hold when entire subcarriers share a common subset of antennas. For uplink receive antenna selection for narrowband channels, we (1) generalize a greedy antenna selection criterion to capture tradeoffs between channel gain and quantization error; (2) propose a quantization-aware fast antenna selection algorithm using the criterion; and (3) derive a lower bound on sum rate achieved by the proposed algorithm based on submodular functions. For wideband OFDM systems, we extend our algorithm and derive a lower bound on its sum rate. Simulation results validate theoretical analyses and show increases in sum rate over conventional algorithms.
△ Less
Submitted 30 June, 2019;
originally announced July 2019.
-
Hybrid Powerline/Wireless Diversity for Smart Grid Communications: Design Challenges and Real-time Implementation
Authors:
Junmo Sung,
Mostafa Sayed,
Mahmoud Elgenedy,
Brian L. Evans,
Naofal Al-Dhahir,
Il Han Kim,
Khurram Waheed
Abstract:
The demand for energy is growing at an unprecedented pace that is much higher than the energy generation capacity growth rate using both conventional and green technologies.In particular, the electric power sector is consistently rated among the most dynamic growth markets over all other energy markets. Distributed (decentralized) energy generation based on renewable energy sources is an efficient…
▽ More
The demand for energy is growing at an unprecedented pace that is much higher than the energy generation capacity growth rate using both conventional and green technologies.In particular, the electric power sector is consistently rated among the most dynamic growth markets over all other energy markets. Distributed (decentralized) energy generation based on renewable energy sources is an efficient and reliable solution to serve such huge energy demand growth [1]. However, to manage dynamic and complex distributed systems, a massive amount of data has to be measured, collected, exchanged and processed in real time. Smart grids manage an intelligent energy delivery network enabled two-way communications between data concentrators operated by utility companies and smart meters installed at the end users. In particular, dynamic power-grid loading and peak load management are the two main driving forces for bidirectional communications over the grid. Narrowband power line communications (NB-PLC) and wireless communications in the unlicensed frequency band (sub-1 GHz or 2.4 GHz) are the two main communications systems adopted to support the growing smart grid applications. Moreover, since NB-PLC and unlicensed wireless links experience channel and interference with markedly different statistics, transmitting the same information signal concurrently over both links significantly enhances the smart grid communications reliability. In this article, we compare various diversity combining schemes for simultaneous power line and wireless transmissions. Furthermore, we developed a real-time testbed for the hybrid PLC/wireless system to demonstrate the performance enhancement achieved by PLC/wireless diversity combining over a single link performance.
△ Less
Submitted 14 August, 2018;
originally announced August 2018.