-
Test Beam Performance Measurements for the Phase I Upgrade of the CMS Pixel Detector
Authors:
M. Dragicevic,
M. Friedl,
J. Hrubec,
H. Steininger,
A. Gädda,
J. Härkönen,
T. Lampén,
P. Luukka,
T. Peltola,
E. Tuominen,
E. Tuovinen,
A. Winkler,
P. Eerola,
T. Tuuva,
G. Baulieu,
G. Boudoul,
L. Caponetto,
C. Combaret,
D. Contardo,
T. Dupasquier,
G. Gallbit,
N. Lumb,
L. Mirabito,
S. Perries,
M. Vander Donckt
, et al. (462 additional authors not shown)
Abstract:
A new pixel detector for the CMS experiment was built in order to cope with the instantaneous luminosities anticipated for the Phase~I Upgrade of the LHC. The new CMS pixel detector provides four-hit tracking with a reduced material budget as well as new cooling and powering schemes. A new front-end readout chip mitigates buffering and bandwidth limitations, and allows operation at low comparator…
▽ More
A new pixel detector for the CMS experiment was built in order to cope with the instantaneous luminosities anticipated for the Phase~I Upgrade of the LHC. The new CMS pixel detector provides four-hit tracking with a reduced material budget as well as new cooling and powering schemes. A new front-end readout chip mitigates buffering and bandwidth limitations, and allows operation at low comparator thresholds. In this paper, comprehensive test beam studies are presented, which have been conducted to verify the design and to quantify the performance of the new detector assemblies in terms of tracking efficiency and spatial resolution. Under optimal conditions, the tracking efficiency is $99.95\pm0.05\,\%$, while the intrinsic spatial resolutions are $4.80\pm0.25\,μ\mathrm{m}$ and $7.99\pm0.21\,μ\mathrm{m}$ along the $100\,μ\mathrm{m}$ and $150\,μ\mathrm{m}$ pixel pitch, respectively. The findings are compared to a detailed Monte Carlo simulation of the pixel detector and good agreement is found.
△ Less
Submitted 1 June, 2017;
originally announced June 2017.
-
Physics at a 100 TeV pp collider: beyond the Standard Model phenomena
Authors:
T. Golling,
M. Hance,
P. Harris,
M. L. Mangano,
M. McCullough,
F. Moortgat,
P. Schwaller,
R. Torre,
P. Agrawal,
D. S. M. Alves,
S. Antusch,
A. Arbey,
B. Auerbach,
G. Bambhaniya,
M. Battaglia,
M. Bauer,
P. S. Bhupal Dev,
A. Boveia,
J. Bramante,
O. Buchmueller,
M. Buschmann,
J. Chakrabortty,
M. Chala,
S. Chekanov,
C. -Y. Chen
, et al. (89 additional authors not shown)
Abstract:
This report summarises the physics opportunities in the search and study of physics beyond the Standard Model at a 100 TeV pp collider.
This report summarises the physics opportunities in the search and study of physics beyond the Standard Model at a 100 TeV pp collider.
△ Less
Submitted 2 June, 2016;
originally announced June 2016.
-
Drell-Yan Production at NNLL'+NNLO Matched to Parton Showers
Authors:
Simone Alioli,
Christian W. Bauer,
Calvin Berggren,
Frank J. Tackmann,
Jonathan R. Walsh
Abstract:
We present results for Drell-Yan production from the GENEVA Monte-Carlo framework. We combine the fully-differential NNLO calculation with higher-order resummation in the 0-jettiness resolution variable. The resulting parton-level events are further combined with parton showering and hadronization provided by PYTHIA8. The 0-jettiness resummation is carried out to NNLL', which consistently incorpor…
▽ More
We present results for Drell-Yan production from the GENEVA Monte-Carlo framework. We combine the fully-differential NNLO calculation with higher-order resummation in the 0-jettiness resolution variable. The resulting parton-level events are further combined with parton showering and hadronization provided by PYTHIA8. The 0-jettiness resummation is carried out to NNLL', which consistently incorporates all singular virtual and real NNLO corrections. It thus provides a natural perturbative connection between the NNLO calculation and the parton shower regime, including a systematic assessment of perturbative uncertainties. In this way, inclusive observables are correct to NNLO, up to small power corrections in the resolution cutoff. Furthermore, the perturbative accuracy of 0-jet-like resummation variables is significantly improved beyond the parton shower approximation. We provide comparisons with LHC measurements of Drell-Yan production at 7 TeV from ATLAS, CMS, and LHCb. As already observed in $e^+e^-$ collisions, for resummation-sensitive observables, the agreement with data is noticeably improved by using a lower value of $α_s(M_Z) = 0.1135$.
△ Less
Submitted 6 August, 2015;
originally announced August 2015.
-
The First Calculation of Fractional Jets
Authors:
Daniele Bertolini,
Jesse Thaler,
Jonathan R. Walsh
Abstract:
In collider physics, jet algorithms are a ubiquitous tool for clustering particles into discrete jet objects. Event shapes offer an alternative way to characterize jets, and one can define a jet multiplicity event shape, which can take on fractional values, using the framework of "jets without jets". In this paper, we perform the first analytic studies of fractional jet multiplicity…
▽ More
In collider physics, jet algorithms are a ubiquitous tool for clustering particles into discrete jet objects. Event shapes offer an alternative way to characterize jets, and one can define a jet multiplicity event shape, which can take on fractional values, using the framework of "jets without jets". In this paper, we perform the first analytic studies of fractional jet multiplicity $\tilde{N}_{\rm jet}$ in the context of $e^+e^-$ collisions. We use fixed-order QCD to understand the $\tilde{N}_{\rm jet}$ cross section at order $α_s^2$, and we introduce a candidate factorization theorem to capture certain higher-order effects. The resulting distributions have a hybrid jet algorithm/event shape behavior which agrees with parton shower Monte Carlo generators. The $\tilde{N}_{\rm jet}$ observable does not satisfy ordinary soft-collinear factorization, and the $\tilde{N}_{\rm jet}$ cross section exhibits a number of unique features, including the absence of collinear logarithms and the presence of soft logarithms that are purely non-global. Additionally, we find novel divergences connected to the energy sharing between emissions, which are reminiscent of rapidity divergences encountered in other applications. Given these interesting properties of fractional jet multiplicity, we advocate for future measurements and calculations of $\tilde{N}_{\rm jet}$ at hadron colliders like the LHC.
△ Less
Submitted 14 May, 2015; v1 submitted 8 January, 2015;
originally announced January 2015.
-
Tagging Partially Reconstructed Objects with Jet Substructure
Authors:
Marat Freytsis,
Tomer Volansky,
Jonathan R. Walsh
Abstract:
We present a new tagger which aims at identifying partially reconstructed objects, in which only some of the constituents are collected in a single jet. As an example, we focus on top decays in which either part of the hadronically decaying W or the b jet is soft or falls outside of the top jet cone. We construct an observable to identify remnant substructure from the decay and employ aggressive j…
▽ More
We present a new tagger which aims at identifying partially reconstructed objects, in which only some of the constituents are collected in a single jet. As an example, we focus on top decays in which either part of the hadronically decaying W or the b jet is soft or falls outside of the top jet cone. We construct an observable to identify remnant substructure from the decay and employ aggressive jet grooming to reject QCD backgrounds. The tagger is complementary to existing ones and works well in the intermediate boost regime where jet substructure techniques usually fail. It is anticipated that a similar tagger can be used to identify non-QCD hadronic jets, such as those expected from hidden valleys.
△ Less
Submitted 23 December, 2014;
originally announced December 2014.
-
Observation of the rare $B^0_s\toμ^+μ^-$ decay from the combined analysis of CMS and LHCb data
Authors:
The CMS,
LHCb Collaborations,
:,
V. Khachatryan,
A. M. Sirunyan,
A. Tumasyan,
W. Adam,
T. Bergauer,
M. Dragicevic,
J. Erö,
M. Friedl,
R. Frühwirth,
V. M. Ghete,
C. Hartl,
N. Hörmann,
J. Hrubec,
M. Jeitler,
W. Kiesenhofer,
V. Knünz,
M. Krammer,
I. Krätschmer,
D. Liko,
I. Mikulec,
D. Rabady,
B. Rahbaran
, et al. (2807 additional authors not shown)
Abstract:
A joint measurement is presented of the branching fractions $B^0_s\toμ^+μ^-$ and $B^0\toμ^+μ^-$ in proton-proton collisions at the LHC by the CMS and LHCb experiments. The data samples were collected in 2011 at a centre-of-mass energy of 7 TeV, and in 2012 at 8 TeV. The combined analysis produces the first observation of the $B^0_s\toμ^+μ^-$ decay, with a statistical significance exceeding six sta…
▽ More
A joint measurement is presented of the branching fractions $B^0_s\toμ^+μ^-$ and $B^0\toμ^+μ^-$ in proton-proton collisions at the LHC by the CMS and LHCb experiments. The data samples were collected in 2011 at a centre-of-mass energy of 7 TeV, and in 2012 at 8 TeV. The combined analysis produces the first observation of the $B^0_s\toμ^+μ^-$ decay, with a statistical significance exceeding six standard deviations, and the best measurement of its branching fraction so far. Furthermore, evidence for the $B^0\toμ^+μ^-$ decay is obtained with a statistical significance of three standard deviations. The branching fraction measurements are statistically compatible with SM predictions and impose stringent constraints on several theories beyond the SM.
△ Less
Submitted 17 August, 2015; v1 submitted 17 November, 2014;
originally announced November 2014.
-
Running Electroweak Couplings as a Probe of New Physics
Authors:
Daniele S. M. Alves,
Jamison Galloway,
Joshua T. Ruderman,
Jonathan R. Walsh
Abstract:
The energy dependence of the electroweak gauge couplings has not been measured above the weak scale. We propose that percent-level measurements of the energy dependence of $α_{1,2}$ can be performed now at the LHC and at future higher energy hadron colliders. These measurements can be used to set limits on new particles with electroweak quantum numbers without relying on any assumptions about thei…
▽ More
The energy dependence of the electroweak gauge couplings has not been measured above the weak scale. We propose that percent-level measurements of the energy dependence of $α_{1,2}$ can be performed now at the LHC and at future higher energy hadron colliders. These measurements can be used to set limits on new particles with electroweak quantum numbers without relying on any assumptions about their decay properties. The shape of the high invariant mass spectrum of Drell-Yan, $p p \rightarrow Z^*/γ^* \rightarrow \ell^+ \ell^-$, constrains $α_{1,2}(Q)$, and the shape of the high transverse mass distribution of $p p \rightarrow W^* \rightarrow \ell ν$ constrains $α_{2}(Q)$. We use existing data to perform the first fits to $α_{1,2}$ above the weak scale. Percent-level measurements are possible because of high precision in theoretical predictions and existing experimental measurements. We show that the LHC already has the reach to improve upon electroweak precision tests for new particles that dominantly couple through their electroweak charges. The 14 TeV LHC is sensitive to the predicted Standard Model (SM) running of $α_2$, and can show that $α_2$ decreases with energy at $2-3 σ$ significance. A future 100 TeV proton-proton collider will have significant reach to measure running weak couplings, with sensitivity to the SM running of $α_2$ at $4-5 σ$ and sensitivity to winos with masses up to $\sim$ 1.3 TeV at $2σ$.
△ Less
Submitted 27 January, 2015; v1 submitted 24 October, 2014;
originally announced October 2014.
-
Fast Beam Condition Monitor for CMS: performance and upgrade
Authors:
Jessica L. Leonard,
Alan Bell,
Piotr Burtowy,
Anne Dabrowski,
Maria Hempel,
Hans Henschel,
Wolfgang Lange,
Wolfgang Lohmann,
Nathaniel Odell,
Marek Penno,
Brian Pollack,
Dominik Przyborowski,
Vladimir Ryjov,
David Stickland,
Roberval Walsh,
Weronika Warzycha,
Agnieszka Zagozdzinska
Abstract:
The CMS beam and radiation monitoring subsystem BCM1F (Fast Beam Condition Monitor) consists of 8 individual diamond sensors situated around the beam pipe within the pixel detector volume, for the purpose of fast bunch-by-bunch monitoring of beam background and collision products. In addition, effort is ongoing to use BCM1F as an online luminosity monitor. BCM1F will be running whenever there is b…
▽ More
The CMS beam and radiation monitoring subsystem BCM1F (Fast Beam Condition Monitor) consists of 8 individual diamond sensors situated around the beam pipe within the pixel detector volume, for the purpose of fast bunch-by-bunch monitoring of beam background and collision products. In addition, effort is ongoing to use BCM1F as an online luminosity monitor. BCM1F will be running whenever there is beam in LHC, and its data acquisition is independent from the data acquisition of the CMS detector, hence it delivers luminosity even when CMS is not taking data. A report is given on the performance of BCM1F during LHC run I, including results of the van der Meer scan and on-line luminosity monitoring done in 2012. In order to match the requirements due to higher luminosity and 25 ns bunch spacing, several changes to the system must be implemented during the upcoming shutdown, including upgraded electronics and precise gain monitoring. First results from Run II preparation are shown.
△ Less
Submitted 8 May, 2014;
originally announced May 2014.
-
Combining Resummed Higgs Predictions Across Jet Bins
Authors:
Radja Boughezal,
Xiaohui Liu,
Frank Petriello,
Frank J. Tackmann,
Jonathan R. Walsh
Abstract:
Experimental analyses often use jet binning to distinguish between different kinematic regimes and separate contributions from background processes. To accurately model theoretical uncertainties in these measurements, a consistent description of the jet bins is required. We present a complete framework for the combination of resummed results for production processes in different exclusive jet bins…
▽ More
Experimental analyses often use jet binning to distinguish between different kinematic regimes and separate contributions from background processes. To accurately model theoretical uncertainties in these measurements, a consistent description of the jet bins is required. We present a complete framework for the combination of resummed results for production processes in different exclusive jet bins, focusing on Higgs production in gluon fusion as an example. We extend the resummation of the Higgs + 1-jet cross section into the challenging low transverse momentum region, lowering the uncertainties considerably. We provide combined predictions with resummation for cross sections in the Higgs + 0-jet and Higgs + 1-jet bins, and give an improved theory covariance matrix for use in experimental studies. We estimate that the relevant theoretical uncertainties on the signal strength in the Higgs to WW analysis are reduced by nearly a factor of 2 compared to the current value.
△ Less
Submitted 16 December, 2013;
originally announced December 2013.
-
Jet Veto Clustering Logarithms Beyond Leading Order
Authors:
Simone Alioli,
Jonathan R. Walsh
Abstract:
Many experimental analyses separate events into exclusive jet bins, using a jet algorithm to cluster the final state and then veto on jets. Jet clustering induces logarithmic dependence on the jet radius R in the cross section for exclusive jet bins, a dependence that is poorly controlled due to the non-global nature of the clustering. At jet radii of experimental interest, the leading order (LO)…
▽ More
Many experimental analyses separate events into exclusive jet bins, using a jet algorithm to cluster the final state and then veto on jets. Jet clustering induces logarithmic dependence on the jet radius R in the cross section for exclusive jet bins, a dependence that is poorly controlled due to the non-global nature of the clustering. At jet radii of experimental interest, the leading order (LO) clustering effects are numerically significant, but the higher order effects are currently unknown. We rectify this situation by calculating the most important part of the next-to-leading order (NLO) clustering logarithms of R for any 0-jet process, which enter as $O(α_s^3)$ corrections to the cross section. The calculation blends subtraction methods for NLO calculations with factorization properties of QCD and soft-collinear effective theory (SCET). We compare the size of the known LO and new NLO clustering logarithms and find that the impact of the NLO terms on the 0-jet cross section in Higgs production is small. This brings clustering effects under better control and may be used to improve uncertainty estimates on cross sections with a jet veto.
△ Less
Submitted 23 November, 2014; v1 submitted 20 November, 2013;
originally announced November 2013.
-
Matching Fully Differential NNLO Calculations and Parton Showers
Authors:
Simone Alioli,
Christian W. Bauer,
Calvin Berggren,
Frank J. Tackmann,
Jonathan R. Walsh,
Saba Zuberi
Abstract:
We present a general method to match fully differential next-to-next-to-leading (NNLO) calculations to parton shower programs. We discuss in detail the perturbative accuracy criteria a complete NNLO+PS matching has to satisfy. Our method is based on consistently improving a given NNLO calculation with the leading-logarithmic (LL) resummation in a chosen jet resolution variable. The resulting NNLO…
▽ More
We present a general method to match fully differential next-to-next-to-leading (NNLO) calculations to parton shower programs. We discuss in detail the perturbative accuracy criteria a complete NNLO+PS matching has to satisfy. Our method is based on consistently improving a given NNLO calculation with the leading-logarithmic (LL) resummation in a chosen jet resolution variable. The resulting NNLO$+$LL calculation is cast in the form of an event generator for physical events that can be directly interfaced with a parton shower routine, and we give an explicit construction of the input "Monte Carlo cross sections" satisfying all required criteria. We also show how other proposed approaches naturally arise as special cases in our method.
△ Less
Submitted 1 November, 2013;
originally announced November 2013.
-
Jet p_T Resummation in Higgs Production at NNLL'+NNLO
Authors:
Iain W. Stewart,
Frank J. Tackmann,
Jonathan R. Walsh,
Saba Zuberi
Abstract:
We present predictions for Higgs production via gluon fusion with a p_T veto on jets and with the resummation of jet-veto logarithms at NNLL'+$NNLO order. These results incorporate explicit O(alphas^2) calculations of soft and beam functions, which include the dominant dependence on the jet radius R. In particular the NNLL' order accounts for the correct boundary conditions for the N3LL resummatio…
▽ More
We present predictions for Higgs production via gluon fusion with a p_T veto on jets and with the resummation of jet-veto logarithms at NNLL'+$NNLO order. These results incorporate explicit O(alphas^2) calculations of soft and beam functions, which include the dominant dependence on the jet radius R. In particular the NNLL' order accounts for the correct boundary conditions for the N3LL resummation, for which the only unknown ingredients are higher-order anomalous dimensions. We use scale variations in a factorization theorem in both rapidity and virtuality space to estimate the perturbative uncertainties, accounting for both higher fixed-order corrections as well as higher-order towers of jet-p_T logarithms. This formalism also predicts the correlations in the theory uncertainty between the exclusive 0-jet and inclusive 1-jet bins. At the values of R used experimentally, there are important corrections due to jet algorithm clustering that include logarithms of R. Although we do not sum logarithms of R, we do include an explicit contribution in our uncertainty estimate to account for higher-order jet clustering logarithms. Precision predictions for this H+0-jet cross section and its theoretical uncertainty are an integral part of Higgs analyses that employ jet binning.
△ Less
Submitted 6 July, 2013;
originally announced July 2013.
-
Handbook of LHC Higgs Cross Sections: 3. Higgs Properties
Authors:
The LHC Higgs Cross Section Working Group,
S. Heinemeyer,
C. Mariotti,
G. Passarino,
R. Tanaka,
J. R. Andersen,
P. Artoisenet,
E. A. Bagnaschi,
A. Banfi,
T. Becher,
F. U. Bernlochner,
S. Bolognesi,
P. Bolzoni,
R. Boughezal,
D. Buarque,
J. Campbell,
F. Caola,
M. Carena,
F. Cascioli,
N. Chanon,
T. Cheng,
S. Y. Choi,
A. David,
P. de Aquino,
G. Degrassi
, et al. (133 additional authors not shown)
Abstract:
This Report summarizes the results of the activities in 2012 and the first half of 2013 of the LHC Higgs Cross Section Working Group. The main goal of the working group was to present the state of the art of Higgs Physics at the LHC, integrating all new results that have appeared in the last few years. This report follows the first working group report Handbook of LHC Higgs Cross Sections: 1. Incl…
▽ More
This Report summarizes the results of the activities in 2012 and the first half of 2013 of the LHC Higgs Cross Section Working Group. The main goal of the working group was to present the state of the art of Higgs Physics at the LHC, integrating all new results that have appeared in the last few years. This report follows the first working group report Handbook of LHC Higgs Cross Sections: 1. Inclusive Observables (CERN-2011-002) and the second working group report Handbook of LHC Higgs Cross Sections: 2. Differential Distributions (CERN-2012-002). After the discovery of a Higgs boson at the LHC in mid-2012 this report focuses on refined prediction of Standard Model (SM) Higgs phenomenology around the experimentally observed value of 125-126 GeV, refined predictions for heavy SM-like Higgs bosons as well as predictions in the Minimal Supersymmetric Standard Model and first steps to go beyond these models. The other main focus is on the extraction of the characteristics and properties of the newly discovered particle such as couplings to SM particles, spin and CP-quantum numbers etc.
△ Less
Submitted 29 November, 2013; v1 submitted 4 July, 2013;
originally announced July 2013.
-
Combining Higher-Order Resummation with Multiple NLO Calculations and Parton Showers in GENEVA
Authors:
Simone Alioli,
Christian W. Bauer,
Calvin Berggren,
Andrew Hornig,
Frank J. Tackmann,
Christopher K. Vermilion,
Jonathan R. Walsh,
Saba Zuberi
Abstract:
We extend the lowest-order matching of tree-level matrix elements with parton showers to give a complete description at the next higher perturbative accuracy in alpha_s at both small and large jet resolutions, which has not been achieved so far. This requires the combination of the higher-order resummation of large Sudakov logarithms at small values of the jet resolution variable with the full nex…
▽ More
We extend the lowest-order matching of tree-level matrix elements with parton showers to give a complete description at the next higher perturbative accuracy in alpha_s at both small and large jet resolutions, which has not been achieved so far. This requires the combination of the higher-order resummation of large Sudakov logarithms at small values of the jet resolution variable with the full next-to-leading order (NLO) matrix-element corrections at large values. As a by-product this combination naturally leads to a smooth connection of the NLO calculations for different jet multiplicities. In this paper, we focus on the general construction of our method and discuss its application to e+e and pp collisions. We present first results of the implementation in the GENEVA Monte Carlo framework, where we employ N-jettiness as the jet resolution variable, combining its next-to-next-to-leading logarithmic resummation with fully exclusive NLO matrix elements, and PYTHIA8 as the backend for further parton showering and hadronization. For hadronic collisions, we take Drell-Yan production as an example to apply our construction. For e+e- -> jets, taking alpha_s(mZ) = 0.1135 from fits to LEP thrust data, together with the PYTHIA8 hadronization model, we obtain good agreement with LEP data for a variety of 2-jet observables.
△ Less
Submitted 6 October, 2013; v1 submitted 29 November, 2012;
originally announced November 2012.
-
Jet Substructure at the Tevatron and LHC: New results, new tools, new benchmarks
Authors:
A. Altheimer,
S. Arora,
L. Asquith,
G. Brooijmans,
J. Butterworth,
M. Campanelli,
B. Chapleau,
A. E. Cholakian,
J. P. Chou,
M. Dasgupta,
A. Davison,
J. Dolen,
S. D. Ellis,
R. Essig,
J. J. Fan,
R. Field,
A. Fregoso,
J. Gallicchio,
Y. Gershtein,
A. Gomes,
A. Haas,
E. Halkiadakis,
V. Halyo,
S. Hoeche,
A. Hook
, et al. (46 additional authors not shown)
Abstract:
In this report we review recent theoretical progress and the latest experimental results in jet substructure from the Tevatron and the LHC. We review the status of and outlook for calculation and simulation tools for studying jet substructure. Following up on the report of the Boost 2010 workshop, we present a new set of benchmark comparisons of substructure techniques, focusing on the set of vari…
▽ More
In this report we review recent theoretical progress and the latest experimental results in jet substructure from the Tevatron and the LHC. We review the status of and outlook for calculation and simulation tools for studying jet substructure. Following up on the report of the Boost 2010 workshop, we present a new set of benchmark comparisons of substructure techniques, focusing on the set of variables and grooming methods that are collectively known as "top taggers". To facilitate further exploration, we have attempted to collect, harmonise, and publish software implementations of these techniques.
△ Less
Submitted 25 May, 2012; v1 submitted 29 December, 2011;
originally announced January 2012.
-
Apparent CPT Violation in Neutrino Oscillation Experiments
Authors:
Netta Engelhardt,
Ann E. Nelson,
Jonathan R. Walsh
Abstract:
We consider searching for light sterile fermions and new forces by using long baseline oscillations of neutrinos and antineutrinos. A new light sterile state and/or a new force can lead to apparent CPT violation in muon neutrino and antineutrino oscillations. As an example, we present an economical model of neutrino masses containing a sterile neutrino. The potential from the Standard Model neut…
▽ More
We consider searching for light sterile fermions and new forces by using long baseline oscillations of neutrinos and antineutrinos. A new light sterile state and/or a new force can lead to apparent CPT violation in muon neutrino and antineutrino oscillations. As an example, we present an economical model of neutrino masses containing a sterile neutrino. The potential from the Standard Model neutral current gives rise to a difference between the disappearance probabilities of neutrinos and antineutrinos, when mixing with a light sterile neutrino is considered. The addition of a B-L interaction adds coherently to the neutrino current potential and increases the difference between neutrino and antineutrino disappearance. We find that this model can improve the fit to the results of MINOS for both neutrinos and antineutrinos, without any CPT violation, and that the regions of parameter space which improve the fit are within experimental constraints.
△ Less
Submitted 14 May, 2010; v1 submitted 23 February, 2010;
originally announced February 2010.
-
The LCFIVertex package: vertexing, flavour tagging and vertex charge reconstruction with an ILC vertex detector
Authors:
LCFI Collaboration,
David Bailey,
Erik Devetak,
Mark Grimes,
Kristian Harder,
Sonja Hillert,
David Jackson,
Talini Pinto Jayawardena,
Ben Jeffery,
Tomas Lastovicka,
Clare Lynch,
Victoria Martin,
Roberval Walsh,
Phil Allport,
Yambazi Banda,
Craig Buttar,
Alexandre Cheplakov,
David Cussans,
Chris Damerell,
Nicolo de Groot,
Johan Fopma,
Brian Foster,
Senerath Galagedera,
Rui Gao,
Anthony Gillman
, et al. (36 additional authors not shown)
Abstract:
The precision measurements envisaged at the International Linear Collider (ILC) depend on excellent instrumentation and reconstruction software. The correct identification of heavy flavour jets, placing unprecedented requirements on the quality of the vertex detector, will be central for the ILC programme. This paper describes the LCFIVertex software, which provides tools for vertex finding and…
▽ More
The precision measurements envisaged at the International Linear Collider (ILC) depend on excellent instrumentation and reconstruction software. The correct identification of heavy flavour jets, placing unprecedented requirements on the quality of the vertex detector, will be central for the ILC programme. This paper describes the LCFIVertex software, which provides tools for vertex finding and for identification of the flavour and charge of the leading hadron in heavy flavour jets. These tools are essential for the ongoing optimisation of the vertex detector design for linear colliders such as the ILC. The paper describes the algorithms implemented in the LCFIVertex package, as well as the scope of the code and its performance for a typical vertex detector design.
△ Less
Submitted 20 August, 2009;
originally announced August 2009.
-
Flavour tag studies with the LCFIVertex package
Authors:
Roberval Walsh
Abstract:
In this contribution the status of the flavour tagging performance for the LDCPrime detector model and studies of the track selection parameters and effects from beam backgrounds in flavour tagging using the LCFIVertex package are presented. This work is part of an effort towards a default configuration for the ILD detector optimisation.
In this contribution the status of the flavour tagging performance for the LDCPrime detector model and studies of the track selection parameters and effects from beam backgrounds in flavour tagging using the LCFIVertex package are presented. This work is part of an effort towards a default configuration for the ILD detector optimisation.
△ Less
Submitted 30 January, 2009;
originally announced January 2009.
