-
Charge Amplification in Low Pressure CF4:SF6:He Mixtures with a Multi-Mesh ThGEM for Directional Dark Matter Searches
Authors:
F. D. Amaro,
E. Baracchini,
L. Benussi,
S. Bianco,
F. Borra,
C. Capoccia,
M. Caponero,
D. S. Cardoso,
G. Cavoto,
I. A. Costa,
T. Crane,
E. Dane,
M. DAstolfo,
G. Dho,
F. Di Giambattista,
G. DImperio,
E. Di Marco,
J. M. F. Dos Santos,
A. C. Ezeribe,
D. Fiorina,
F. Iacoangeli,
H. P. Lima Junior,
G. S. P. Lopes,
G. Maccarrone,
R. D. P. Mano
, et al. (24 additional authors not shown)
Abstract:
The CYGNO collaboration is developing next generation directional Dark Matter (DM) detection experiments, using gaseous Time Projection Chambers (TPCs), as a robust method for identifying Weakly Interacting Massive Particles (WIMPs) below the Neutrino Fog. SF6 is potentially ideal for this since it provides a high fluorine content, enhancing sensitivity to spin-dependent interactions and, as a Neg…
▽ More
The CYGNO collaboration is developing next generation directional Dark Matter (DM) detection experiments, using gaseous Time Projection Chambers (TPCs), as a robust method for identifying Weakly Interacting Massive Particles (WIMPs) below the Neutrino Fog. SF6 is potentially ideal for this since it provides a high fluorine content, enhancing sensitivity to spin-dependent interactions and, as a Negative Ion Drift (NID) gas, reduces charge diffusion leading to improved positional resolution. CF4, although not a NID gas, has also been identified as a favourable gas target as it provides a scintillation signal which can be used for a complimentary light/charge readout approach. These gases can operate at low pressures to elongate Nuclear Recoil (NR) tracks and facilitate directional measurements. In principle, He could be added to low pressure SF6/CF4 without significant detriment to the length of 16S, 12C, and 19F recoils. This would improve the target mass, sensitivity to lower WIMP masses, and offer the possibility of atmospheric operation; potentially reducing the cost of a containment vessel. In this article, we present gas gain and energy resolution measurements, taken with a Multi-Mesh Thick Gaseous Electron Multiplier (MMThGEM), in low pressure SF6 and CF4:SF6 mixtures following the addition of He. We find that the CF4:SF6:He mixtures tested were able to produce gas gains on the order of 10^4 up to a total pressure of 100 Torr. These results demonstrate an order of magnitude improvement in charge amplification in NID gas mixtures with a He component.
△ Less
Submitted 28 May, 2024;
originally announced May 2024.
-
Optimal tracking strategies in a turbulent flow
Authors:
Chiara Calascibetta,
Luca Biferale,
Francesco Borra,
Antonio Celani,
Massimo Cencini
Abstract:
Pursuing a drifting target in a turbulent flow is an extremely difficult task whenever the searcher has limited propulsion and maneuvering capabilities. Even in the case when the relative distance between pursuer and target stays below the turbulent dissipative scale, the chaotic nature of the trajectory of the target represents a formidable challenge. Here, we show how to successfully apply optim…
▽ More
Pursuing a drifting target in a turbulent flow is an extremely difficult task whenever the searcher has limited propulsion and maneuvering capabilities. Even in the case when the relative distance between pursuer and target stays below the turbulent dissipative scale, the chaotic nature of the trajectory of the target represents a formidable challenge. Here, we show how to successfully apply optimal control theory to find navigation strategies that overcome chaotic dispersion and allow the searcher to reach the target in a minimal time. We contrast the results of optimal control -- which requires perfect observability and full knowledge of the dynamics of the environment -- with heuristic algorithms that are reactive -- relying on local, instantaneous information about the flow. While the latter display significantly worse performances, optimally controlled pursuers can track the target for times much longer than the typical inverse Lyapunov exponent and are considerably more robust.
△ Less
Submitted 8 May, 2023;
originally announced May 2023.
-
Taming Lagrangian Chaos with Multi-Objective Reinforcement Learning
Authors:
Chiara Calascibetta,
Luca Biferale,
Francesco Borra,
Antonio Celani,
Massimo Cencini
Abstract:
We consider the problem of two active particles in 2D complex flows with the multi-objective goals of minimizing both the dispersion rate and the energy consumption of the pair. We approach the problem by means of Multi Objective Reinforcement Learning (MORL), combining scalarization techniques together with a Q-learning algorithm, for Lagrangian drifters that have variable swimming velocity. We s…
▽ More
We consider the problem of two active particles in 2D complex flows with the multi-objective goals of minimizing both the dispersion rate and the energy consumption of the pair. We approach the problem by means of Multi Objective Reinforcement Learning (MORL), combining scalarization techniques together with a Q-learning algorithm, for Lagrangian drifters that have variable swimming velocity. We show that MORL is able to find a set of trade-off solutions forming an optimal Pareto frontier. As a benchmark, we show that a set of heuristic strategies are dominated by the MORL solutions. We consider the situation in which the agents cannot update their control variables continuously, but only after a discrete (decision) time, $τ$. We show that there is a range of decision times, in between the Lyapunov time and the continuous updating limit, where Reinforcement Learning finds strategies that significantly improve over heuristics. In particular, we discuss how large decision times require enhanced knowledge of the flow, whereas for smaller $τ$ all a priori heuristic strategies become Pareto optimal.
△ Less
Submitted 19 December, 2022;
originally announced December 2022.
-
Reinforcement learning for pursuit and evasion of microswimmers at low Reynolds number
Authors:
Francesco Borra,
Luca Biferale,
Massimo Cencini,
Antonio Celani
Abstract:
We consider a model of two competing microswimming agents engaged in a pursue-evasion task within a low-Reynolds-number environment. Agents can only perform simple maneuvers and sense hydrodynamic disturbances, which provide ambiguous (partial) information about the opponent's position and motion. We frame the problem as a zero-sum game: The pursuer has to capture the evader in the shortest time,…
▽ More
We consider a model of two competing microswimming agents engaged in a pursue-evasion task within a low-Reynolds-number environment. Agents can only perform simple maneuvers and sense hydrodynamic disturbances, which provide ambiguous (partial) information about the opponent's position and motion. We frame the problem as a zero-sum game: The pursuer has to capture the evader in the shortest time, while the evader aims at deferring capture as long as possible. We show that the agents, trained via adversarial reinforcement learning, are able to overcome partial observability by discovering increasingly complex sequences of moves and countermoves that outperform known heuristic strategies and exploit the hydrodynamic environment.
△ Less
Submitted 2 March, 2022; v1 submitted 16 June, 2021;
originally announced June 2021.
-
Using machine-learning modelling to understand macroscopic dynamics in a system of coupled maps
Authors:
Francesco Borra,
Marco Baldovin
Abstract:
Machine learning techniques not only offer efficient tools for modelling dynamical systems from data, but can also be employed as frontline investigative instruments for the underlying physics. Nontrivial information about the original dynamics, which would otherwise require sophisticated ad-hoc techniques, can be obtained by a careful usage of such methods. To illustrate this point, we consider a…
▽ More
Machine learning techniques not only offer efficient tools for modelling dynamical systems from data, but can also be employed as frontline investigative instruments for the underlying physics. Nontrivial information about the original dynamics, which would otherwise require sophisticated ad-hoc techniques, can be obtained by a careful usage of such methods. To illustrate this point, we consider as a case study the macroscopic motion emerging from a system of globally coupled maps. We build a coarse-grained Markov process for the macroscopic dynamics both with a machine learning approach and with a direct numerical computation of the transition probability of the coarse-grained process, and we compare the outcomes of the two analyses. Our purpose is twofold: on the one hand, we want to test the ability of the stochastic machine learning approach to describe nontrivial evolution laws, as the one considered in our study; on the other hand, we aim at gaining some insight into the physics of the macroscopic dynamics by modulating the information available to the network, we are able to infer important information about the effective dimension of the attractor, the persistence of memory effects and the multi-scale structure of the dynamics.
△ Less
Submitted 8 November, 2020;
originally announced November 2020.
-
Dynamic response of ferrofluidic deformable mirrors using elastomer membrane and overdrive techniques
Authors:
Maxime Rochette,
Ermanno F. Borra,
Jean-Philippe Déry,
Anna M. Ritcey
Abstract:
Here are presented the experimental results obtained with a ferrofluidic deformable mirror controlled by electro-magnet actuators. Using a step input through a single actuator we obtain a steady-state settling time of 100ms; however, different combinations of overdrive inputs can be used to decrease it to 25ms. Also, a new technique which consists in laying down an elastomer membrane, coated with…
▽ More
Here are presented the experimental results obtained with a ferrofluidic deformable mirror controlled by electro-magnet actuators. Using a step input through a single actuator we obtain a steady-state settling time of 100ms; however, different combinations of overdrive inputs can be used to decrease it to 25ms. Also, a new technique which consists in laying down an elastomer membrane, coated with an aluminum film, on the ferrofluid is discussed. By adding the membrane on the ferrofluid, it further decreases the time response by a factor of 2. Furthermore, the thin aluminum layer improves the reflectivity of the mirror. Finally, using the membrane and the overdrive techniques combined, the time response is improved by a factor of 20. Numerical simulations show that ferrofluidic mirrors using membranes and improved electronics should reach settling times of the order of a millisecond. Presumably even lower settling times could be possible.
△ Less
Submitted 3 October, 2018;
originally announced October 2018.
-
Linearization of the response of a 91-actuator magnetic liquid deformable mirror
Authors:
Denis Brousseau,
Ermanno F. Borra,
Maxime Rochette,
Daniel Bouffard Landry
Abstract:
We present the experimental performance of a 91-actuator deformable mirror made of a magnetic liquid (ferrofluid) using a new technique that linearizes the response of the mirror by superposing a uniform magnetic field to the one produced by the actuators. We demonstrate linear driving of the mirror using influence functions, measured with a Fizeau interferometer, by producing the first 36 Zernike…
▽ More
We present the experimental performance of a 91-actuator deformable mirror made of a magnetic liquid (ferrofluid) using a new technique that linearizes the response of the mirror by superposing a uniform magnetic field to the one produced by the actuators. We demonstrate linear driving of the mirror using influence functions, measured with a Fizeau interferometer, by producing the first 36 Zernikes polynomials. Based on our measurements, we predict achievable mean PV wavefront amplitudes of up to 30 μm having RMS residuals of λ/10 at 632.8 nm. Linear combination of Zernikes and over-time repeatability are also demonstrated.
△ Less
Submitted 14 June, 2010;
originally announced June 2010.
-
Wavefront correction with a ferrofluid deformable mirror: experimental results and recent developments
Authors:
Denis Brousseau,
Ermanno F. Borra,
Simon Thibaul,
Anna M. Ritcey,
Jocelyn Parent,
Omar Seddiki,
Jean-Philippe Dery,
Luc Faucher,
Julien Vassallo,
Azadeh Naderian
Abstract:
We present the research status of a deformable mirror made of a magnetic liquid whose surface is actuated by a triangular array of small current carrying coils. We demonstrate that the mirror can correct a 11 microns low order aberrated wavefront to a residual RMS wavefront error 0.05 microns. Recent developments show that these deformable mirrors can reach a frequency response of several hundre…
▽ More
We present the research status of a deformable mirror made of a magnetic liquid whose surface is actuated by a triangular array of small current carrying coils. We demonstrate that the mirror can correct a 11 microns low order aberrated wavefront to a residual RMS wavefront error 0.05 microns. Recent developments show that these deformable mirrors can reach a frequency response of several hundred hertz. A new method for linearizing the response of these mirrors is also presented.
△ Less
Submitted 15 July, 2008;
originally announced July 2008.
-
A magnetic liquid deformable mirror for high stroke and low order axially symmetrical aberrations
Authors:
Denis Brousseau,
Ermanno F. Borra,
Hubert-Jean Ruel,
Jocelyn Parent
Abstract:
We present a new class of magnetically shaped deformable liquid mirrors made of a magnetic liquid (ferrofluid). Deformable liquid mirrors offer advantages with respect to deformable solid mirrors: large deformations, low costs and the possibility of very large mirrors with added aberration control. They have some disadvantages (e.g. slower response time). We made and tested a deformable mirror,…
▽ More
We present a new class of magnetically shaped deformable liquid mirrors made of a magnetic liquid (ferrofluid). Deformable liquid mirrors offer advantages with respect to deformable solid mirrors: large deformations, low costs and the possibility of very large mirrors with added aberration control. They have some disadvantages (e.g. slower response time). We made and tested a deformable mirror, producing axially symmetrical wavefront aberrations by applying electric currents to 5 concentric coils made of copper wire wound on aluminum cylinders. Each of these coils generates a magnetic field which combines to deform the surface of a ferrofluid to the desired shape. We have carried out laboratory tests on a 5 cm diameter prototype mirror and demonstrated defocus as well as Seidel and Zernike spherical aberrations having amplitudes up to 20 microns, which was the limiting measurable amplitude of our equipment
△ Less
Submitted 15 November, 2006;
originally announced November 2006.
-
Optical Tests of Nanoengineered Liquid Mirrors
Authors:
Helene Yockell-Lelievre,
Ermanno F. Borra,
Anna Ritcey,
Lande Vieira da Silva Jr
Abstract:
We describe a new technology for the fabrication of inexpensive high-quality mirrors. We begin by chemically producing a large number of metallic nanoparticles coated with organic ligands. The particles are then spread on a liquid substrate where they self-assemble to give optical quality reflective surfaces. Since liquid surfaces can be modified with a variety of means (e.g. rotation, electroma…
▽ More
We describe a new technology for the fabrication of inexpensive high-quality mirrors. We begin by chemically producing a large number of metallic nanoparticles coated with organic ligands. The particles are then spread on a liquid substrate where they self-assemble to give optical quality reflective surfaces. Since liquid surfaces can be modified with a variety of means (e.g. rotation, electromagnetic fields), this opens the possibility of making a new class of versatile and inexpensive optical elements that can have complex shapes which can be modified within short time scales. Interferometric measurements show optical quality surfaces. We have obtained reflectivity curves that show 80% peak reflectivities.We are confident that we can improve the reflectivity curves, for theoretical models predict higher values. We expect that nanoengineered liquid mirrors should be useful for scientific and engineering applications. The technology is interesting for large optics, such as large rotating parabolic mirrors, because of its low cost. Furthermore, because the surfaces of ferrofluids can be shaped with magnetic fields, one can generate complex, time varying surfaces difficult to make with conventional techniques.
△ Less
Submitted 22 January, 2003;
originally announced January 2003.
