-
Timing resolution performance of Timepix4 bump-bonded assemblies
Authors:
Riccardo Bolzonella,
Jerome Alexandre Alozy,
Rafael Ballabriga,
Martin van Beuzekom,
Nicolò Vladi Biesuz,
Michael Campbell,
Paolo Cardarelli,
Viola Cavallini,
Victor Coco,
Angelo Cotta Ramusino,
Massimiliano Fiorini,
Vladimir Gromov,
Marco Guarise,
Xavier Llopart Cudie,
Shinichi Okamura,
Gabriele Romolini,
Alessandro Saputi,
Arseniy Vitkovskiy
Abstract:
The timing performance of the Timepix4 application-specific integrated circuit (ASIC) bump-bonded to a $100\;μ\textrm{m}$ thick n-on-p silicon sensor is presented. A picosecond pulsed infrared laser was used to generate electron-hole pairs in the silicon bulk in a repeatable fashion, controlling the amount, position and time of the stimulated charge signal. The timing resolution for a single pixel…
▽ More
The timing performance of the Timepix4 application-specific integrated circuit (ASIC) bump-bonded to a $100\;μ\textrm{m}$ thick n-on-p silicon sensor is presented. A picosecond pulsed infrared laser was used to generate electron-hole pairs in the silicon bulk in a repeatable fashion, controlling the amount, position and time of the stimulated charge signal. The timing resolution for a single pixel has been measured to $107\;\textrm{ps}$ r.m.s. for laser-stimulated signals in the silicon sensor bulk. Considering multi-pixel clusters, the measured timing resolution reached $33\;\textrm{ps}$ r.m.s. exploiting oversampling of the timing information over several pixels.
△ Less
Submitted 9 July, 2024; v1 submitted 23 April, 2024;
originally announced April 2024.
-
A new method for spatial mode shifting of a stabilized optical cavity for the generation of dual-color X-rays
Authors:
Edoardo Suerra,
Dario Giannotti,
Francesco Canella,
Stefano Capra,
Daniele Cipriani,
Giovanni Mettivier,
Gianluca Galzerano,
Paolo Cardarelli,
Simone Cialdi,
Luca Serafini
Abstract:
We propose an innovative method to shift the transversal position of the focal point of an optical cavity keeping it actively stabilized. Our cavity is a 4 mirrors bow-tie cavity and the spatial shift of the resonant mode is obtained by properly rotating the two curved mirrors by piezo actuators. This method allows us to move the transversal position of the cavity focal point of $135 μm$ in a time…
▽ More
We propose an innovative method to shift the transversal position of the focal point of an optical cavity keeping it actively stabilized. Our cavity is a 4 mirrors bow-tie cavity and the spatial shift of the resonant mode is obtained by properly rotating the two curved mirrors by piezo actuators. This method allows us to move the transversal position of the cavity focal point of $135 μm$ in a time of $50 ms$, keeping the resonance condition of the cavity by means of the Pound-Drever-Hall technique. We propose to use this technique for the generation of 2-color X-rays via Inverse Compton Scattering (ICS). This technique exploits the large average power stored in the high finesse cavity by shifting the laser beam with respect to the electron beam trajectory, hence controlling the spatial superposition of the electron and photon beams in the interaction region. Arranging two cavities assembled one on top of the other, with different collision angle with the electron beam, allows the generation of X-ray bursts of different energies just by swiftly moving the two cavities, switching the two focal points onto the electron beam trajectory, thus activating in sequence two different ICS spectral lines.
△ Less
Submitted 9 March, 2021;
originally announced March 2021.
-
Technical Design Report EuroGammaS proposal for the ELI-NP Gamma beam System
Authors:
O. Adriani,
S. Albergo,
D. Alesini,
M. Anania,
D. Angal-Kalinin,
P. Antici,
A. Bacci,
R. Bedogni,
M. Bellaveglia,
C. Biscari,
N. Bliss,
R. Boni,
M. Boscolo,
F. Broggi,
P. Cardarelli,
K. Cassou,
M. Castellano,
L. Catani,
I. Chaikovska,
E. Chiadroni,
R. Chiche,
A. Cianchi,
J. Clarke,
A. Clozza,
M. Coppola
, et al. (84 additional authors not shown)
Abstract:
The machine described in this document is an advanced Source of up to 20 MeV Gamma Rays based on Compton back-scattering, i.e. collision of an intense high power laser beam and a high brightness electron beam with maximum kinetic energy of about 720 MeV. Fully equipped with collimation and characterization systems, in order to generate, form and fully measure the physical characteristics of the pr…
▽ More
The machine described in this document is an advanced Source of up to 20 MeV Gamma Rays based on Compton back-scattering, i.e. collision of an intense high power laser beam and a high brightness electron beam with maximum kinetic energy of about 720 MeV. Fully equipped with collimation and characterization systems, in order to generate, form and fully measure the physical characteristics of the produced Gamma Ray beam. The quality, i.e. phase space density, of the two colliding beams will be such that the emitted Gamma ray beam is characterized by energy tunability, spectral density, bandwidth, polarization, divergence and brilliance compatible with the requested performances of the ELI-NP user facility, to be built in Romania as the Nuclear Physics oriented Pillar of the European Extreme Light Infrastructure. This document illustrates the Technical Design finally produced by the EuroGammaS Collaboration, after a thorough investigation of the machine expected performances within the constraints imposed by the ELI-NP tender for the Gamma Beam System (ELI-NP-GBS), in terms of available budget, deadlines for machine completion and performance achievement, compatibility with lay-out and characteristics of the planned civil engineering.
△ Less
Submitted 14 July, 2014;
originally announced July 2014.
