-
Detecting Iron Oxidation States in Liquids with the VOXES Bragg Spectrometer
Authors:
Simone Manti,
Marco Miliucci,
Alessandro Scordo,
Roberto Bedogni,
Alberto Clozza,
Mihail Iliescu,
Gabriel Moskal,
Kristian Piscicchia,
Alessio Porcelli,
Diana Sirghi,
Florin Sirghi,
Catalina Curceanu
Abstract:
Determining the oxidation states of metals assumes great importance in various applications because a variation in the oxidation number can drastically influence the material properties. As an example, this becomes evident in edible liquids like wine and oil, where a change in the oxidation states of the contained metals can significantly modify both the overall quality and taste. To this end, her…
▽ More
Determining the oxidation states of metals assumes great importance in various applications because a variation in the oxidation number can drastically influence the material properties. As an example, this becomes evident in edible liquids like wine and oil, where a change in the oxidation states of the contained metals can significantly modify both the overall quality and taste. To this end, here we present the MITIQO project, which aims to identify oxidation states of metals in edible liquids utilizing X-ray emission with Bragg spectroscopy. This is achieved using the VOXES crystal spectrometer, developed at INFN National Laboratories of Frascati (LNF), employing mosaic crystal (HAPG) in the Von Hamos configuration. This combination allow us to work with effective source sizes of up to a few millimeters and improves the typical low efficiency of Bragg spectroscopy, a crucial aspect when studying liquids with low metal concentration. Here we showcase the concept behind MITIQO, for a liquid solution containing oxidized iron. We performed several high-resolution emission spectra measurements, for the liquid and for different powdered samples containing oxidized and pure iron. By looking at the spectral features of the iron's K$β$ emission lineshape, we were able to obtain, for a liquid, a result consistent with the oxidized iron powders and successfully quantifying the effect of oxidation.
△ Less
Submitted 9 October, 2023;
originally announced October 2023.
-
Improved methodologies to study the performance of the ANET Compact Neutron Collimator
Authors:
Oriol Sans-Planell,
Francesco Cantini,
Marco Costa,
Elisabetta Durisi,
Francesco Grazzi,
Ettore Mafucci,
Valeria Monti,
Roberto Bedogni,
Yueer Li,
Lambert van Eijck
Abstract:
The ANET project aims at developing 2D compact neutron collimators for neutron imaging applications. The results of the ANET collimator performances, presented in this communication, are based on data collected at the FISH beamline at TU-Delft. Two independent methods to evaluate the neutron radiography resolution are described and discussed, as well as a comparison of the beam divergence with or…
▽ More
The ANET project aims at developing 2D compact neutron collimators for neutron imaging applications. The results of the ANET collimator performances, presented in this communication, are based on data collected at the FISH beamline at TU-Delft. Two independent methods to evaluate the neutron radiography resolution are described and discussed, as well as a comparison of the beam divergence with or without the ANET collimator.
△ Less
Submitted 18 January, 2023;
originally announced January 2023.
-
Results of the EURADOS international comparison exercise on neutron spectra unfolding in Bonner spheres spectrometry
Authors:
J. M. Gómez-Ros,
R. Bedogni,
C. Domingo,
J. S. Eakins,
N. Roberts,
R. J. Tanner
Abstract:
This paper summarizes the results obtained from an international comparison exercise on neutron spectra unfolding in Bonner spheres spectrometry, organized within the activities of EURADOS working group 6: computational dosimetry. Four realistic situations were considered: a medical accelerator, a workplace field, an irradiation room and a skyshine scenario. The reference solutions are presented,…
▽ More
This paper summarizes the results obtained from an international comparison exercise on neutron spectra unfolding in Bonner spheres spectrometry, organized within the activities of EURADOS working group 6: computational dosimetry. Four realistic situations were considered: a medical accelerator, a workplace field, an irradiation room and a skyshine scenario. The reference solutions are presented, given in terms of idealized fluence-energy distributions and dose rates, along with details of their derivation using verified Monte Carlo codes. The wide variety of unfolded results that were submitted by the participants are then provided, with some shown to agree well with the reference solutions but others showing significant energy-dependent discrepancies. Finally, explanations for some of these discrepancies are proposed, along with suggested methods for how they might be improved.
△ Less
Submitted 21 April, 2022; v1 submitted 4 January, 2022;
originally announced January 2022.
-
First Results with the ANET Compact Thermal Neutron Collimator
Authors:
Oriol Sans-Planell,
Marco Costa,
Elisabetta Durisi,
Ettore Mafucci,
Luca Menzio,
Valeria Monti,
Lorenzo Visca,
Francesco Grazzi,
Roberto Bedogni,
Saverio Altieri
Abstract:
This paper presents the first determination of the spatial resolution of the ANET Compact Neutron Collimator, obtained with a measuring campaign at the LENA Mark-II TRIGA reactor in Pavia. This novel collimator consists of a sequence of collimating and absorbing channels organised in a chessboard-like geometry. It has a scalable structure both in length and in the field of view. It is characterize…
▽ More
This paper presents the first determination of the spatial resolution of the ANET Compact Neutron Collimator, obtained with a measuring campaign at the LENA Mark-II TRIGA reactor in Pavia. This novel collimator consists of a sequence of collimating and absorbing channels organised in a chessboard-like geometry. It has a scalable structure both in length and in the field of view. It is characterized by an elevated collimation power within a limited length. Its scalability and compactness are added values with respect to traditional collimating system. The prototype tested in this article is composed of 4 concatenated stages, each 100mm long, with a channel width of 2.5mm, delivering a nominal L/D factor of 160. This measuring campaign illustrates the use of the ANET collimator and its potential application in neutron imaging for facilities with small or medium size neutron sources.
△ Less
Submitted 18 October, 2021;
originally announced October 2021.
-
Design of a novel compact neutron collimator
Authors:
Roberto Bedogni,
Marco Costa,
Elisabetta Durisi,
Francesco Grazzi,
Alessandro Lega,
Ettore Mafucci,
Luca Menzio,
Valeria Monti,
Oriol Sans-Planell,
Lorenzo Visca
Abstract:
In this work the concept of a novel slow neutron collimator and the way to operate it are presented. The idea is based on the possibility to decouple the device field-of-view from its collimation power. A multi-channel geometry is proposed consisting of a chess-board structure where highly neutron-absorbing channels are alternated to air channels. A borated polymer was purposely developed to produ…
▽ More
In this work the concept of a novel slow neutron collimator and the way to operate it are presented. The idea is based on the possibility to decouple the device field-of-view from its collimation power. A multi-channel geometry is proposed consisting of a chess-board structure where highly neutron-absorbing channels are alternated to air channels. A borated polymer was purposely developed to produce the attenuating components in the form of square-sectioned long rods. A scalable structure consisting of multiple collimation sectors can be arranged. The geometrical parameter LD, corresponding to the ratio between the length of a channel and its width, defines the collimation power. Several sectors can be arranged one after the other to reach relevant collimation powers. Each sector, 100 mm long, is composed by several channels with D = 2.5 mm corresponding to an L/D coefficient of 40. The target field of view is 50x50 mm2. This novel collimator, developed inside the INFN-ANET collaboration, due to its intrinsic compactness, will be of great importance to enhance the neutron imaging capability of small to medium-size neutron sources.
△ Less
Submitted 6 August, 2021;
originally announced August 2021.
-
Development of gamma insensitive silicon carbide diagnostics to qualify intense thermal and epithermal neutron fields
Authors:
O. Sans Planell,
M. Costa,
E. Durisi,
A. Lega,
E. Mafucci,
L. Menzio,
V. Monti,
L. Visca,
R. Bedogni,
M. Treccani,
A. Pola,
D. Bortot,
K. Alikaniotis,
G. Giannini,
J. M. Gomez-Ros
Abstract:
The e_LiBANS project aims at creating accelerator based compact neutron facilities for diverse interdisciplinary applications. After the successful setting up and characterization of a thermal neutron source based on a medical electron LINAC, a similar assembly for epithermal neutrons has been developed. The project is based on an Elekta 18 MV LINAC coupled with a photoconverter-moderator system w…
▽ More
The e_LiBANS project aims at creating accelerator based compact neutron facilities for diverse interdisciplinary applications. After the successful setting up and characterization of a thermal neutron source based on a medical electron LINAC, a similar assembly for epithermal neutrons has been developed. The project is based on an Elekta 18 MV LINAC coupled with a photoconverter-moderator system which deploys the (γ,n) photonuclear reaction to convert a bremsstrahlung photon beam into a neutron field. This communication describes the development of novel diagnostics to qualify the thermal and epithermal neutron fields that have been produced. In particular, a proof of concept for the use of silicon carbide photodiodes as a thermal neutron rate detector is presented.
△ Less
Submitted 17 April, 2020;
originally announced April 2020.
-
A 1 m$^3$ Gas Time Projection Chamber with Optical Readout for Directional Dark Matter Searches: the CYGNO Experiment
Authors:
E. Baracchini,
R. Bedogni,
F. Bellini,
L. Benussi,
S. Bianco,
C. Capoccia,
M. Caponero,
G. Cavoto,
I. A. Costa,
E. Di Marco,
G. D'Imperio,
F. Iacoangeli,
G. Maccarone,
M. Marafini,
G. Mazzitelli,
A. Messina,
A. Orlandi,
E. Paoletti,
L. Passamonti,
A. Pelosi,
F. Petrucci,
D. Piccolo,
D. Pierluigi,
D. Pinci,
F. Renga
, et al. (3 additional authors not shown)
Abstract:
The aim of the CYGNO project is the construction and operation of a 1~m$^3$ gas TPC for directional dark matter searches and coherent neutrino scattering measurements, as a prototype toward the 100-1000~m$^3$ (0.15-1.5 tons) CYGNUS network of underground experiments. In such a TPC, electrons produced by dark-matter- or neutrino-induced nuclear recoils will drift toward and will be multiplied by a…
▽ More
The aim of the CYGNO project is the construction and operation of a 1~m$^3$ gas TPC for directional dark matter searches and coherent neutrino scattering measurements, as a prototype toward the 100-1000~m$^3$ (0.15-1.5 tons) CYGNUS network of underground experiments. In such a TPC, electrons produced by dark-matter- or neutrino-induced nuclear recoils will drift toward and will be multiplied by a three-layer GEM structure, and the light produced in the avalanche processes will be readout by a sCMOS camera, providing a 2D image of the event with a resolution of a few hundred micrometers. Photomultipliers will also provide a simultaneous fast readout of the time profile of the light production, giving information about the third coordinate and hence allowing a 3D reconstruction of the event, from which the direction of the nuclear recoil and consequently the direction of the incoming particle can be inferred. Such a detailed reconstruction of the event topology will also allow a pure and efficient signal to background discrimination. These two features are the key to reach and overcome the solar neutrino background that will ultimately limit non-directional dark matter searches.
△ Less
Submitted 8 January, 2020;
originally announced January 2020.
-
CYGNO: Triple-GEM Optical Readout for Directional Dark Matter Search
Authors:
I. Abritta Costa,
E. Baracchini,
R. Bedogni,
F. Bellini,
L. Benussi,
S. Bianco,
M. Caponero,
G. Cavoto,
E. Di Marco,
G. D'Imperio,
G. Maccarrone,
M. Marafini,
G. Mazzitelli,
A. Messina,
F. Petrucci,
D. Piccolo,
D. Pinci,
F. Renga,
G. Saviano,
S. Tomassini
Abstract:
CYGNO is a project realising a cubic meter demonstrator to study the scalability of the performance of the optical approach for the readout of large-volume, GEM-equipped TPC. This is part of the CYGNUS proto-collaboration which aims at constructing a network of underground observatories for directional Dark Matter search. The combined use of high-granularity sCMOS and fast sensors for reading out…
▽ More
CYGNO is a project realising a cubic meter demonstrator to study the scalability of the performance of the optical approach for the readout of large-volume, GEM-equipped TPC. This is part of the CYGNUS proto-collaboration which aims at constructing a network of underground observatories for directional Dark Matter search. The combined use of high-granularity sCMOS and fast sensors for reading out the light produced in GEM channels during the multiplication processes was shown to allow on one hand to reconstruct 3D direction of the tracks, offering accurate energy measurements and sensitivity to the source directionality and, on the other hand, a high particle identification capability very useful to distinguish nuclear recoils. Results of the performed R&D and future steps toward a 30-100 cubic meter experiment will be presented.
△ Less
Submitted 21 October, 2019; v1 submitted 16 October, 2019;
originally announced October 2019.
-
The e_LiBANS facility: a new compact thermal neutron source based on a medical electron LINAC
Authors:
Valeria Monti,
Marco Costa,
Elisabetta Durisi,
Ettore Mafucci,
Luca Menzio,
Oriol Sans-Planell,
Lorenzo Visca,
Roberto Bedogni,
Matteo Treccani,
Andrea Pola,
Davide Bortot,
Katia Alikaniotis,
Gianrossano Giannini,
Jose Maria Gomez-Ros
Abstract:
A new photonuclear thermal neutron facility has been developed at the Physics Department of University of Torino. The facility is based on a medical electron LINAC coupled to a compact converter and moderator assembly. A homogenous thermal neutron field of the order of 10$^6$ cm$^{-2}$s$^{-1}$ is achievable in the enclosed irradiation cavity with low gamma and fast neutron contaminations. Its inte…
▽ More
A new photonuclear thermal neutron facility has been developed at the Physics Department of University of Torino. The facility is based on a medical electron LINAC coupled to a compact converter and moderator assembly. A homogenous thermal neutron field of the order of 10$^6$ cm$^{-2}$s$^{-1}$ is achievable in the enclosed irradiation cavity with low gamma and fast neutron contaminations. Its intensity can be tuned varying the LINAC current. These characteristics make the source appropriate for several applications like detectors development, material studies and BNCT preclinical research. This work describes the project and the experimental characterization of the facility. This includes the measurement of the thermal neutron fluence rate, the determination of the neutron energy spectrum and of the thermal neutron field uniformity and the evaluation of the gamma contamination.
△ Less
Submitted 2 September, 2019;
originally announced September 2019.
-
CYGNO: a CYGNUs Collaboration 1 m^3 Module with Optical Readout for Directional Dark Matter Search
Authors:
E. Baracchini,
R. Bedogni,
F. Bellini,
L. Benussi,
S. Bianco,
L. Bignell,
M. Caponero,
G. Cavoto,
E. Di Marco,
C. Eldridge,
A. Ezeribe,
R. Gargana,
T. Gamble,
R. Gregorio,
G. Lane,
D. Loomba,
W. Lynch,
G. Maccarrone,
M. Marafini,
G. Mazzitelli,
A. Messina,
A. Mills,
K. Miuchi,
F. Petrucci,
D. Piccolo
, et al. (8 additional authors not shown)
Abstract:
The design of the project named CYGNO is presented. CYGNO is a new proposal supported by INFN, the Italian National Institute for Nuclear Physics, within CYGNUs proto-collaboration (CYGNUS-TPC) that aims to realize a distributed observatory in underground laboratories for directional Dark Matter (DM) search and the identification of the coherent neutrino scattering (CNS) from the Sun. CYGNO is one…
▽ More
The design of the project named CYGNO is presented. CYGNO is a new proposal supported by INFN, the Italian National Institute for Nuclear Physics, within CYGNUs proto-collaboration (CYGNUS-TPC) that aims to realize a distributed observatory in underground laboratories for directional Dark Matter (DM) search and the identification of the coherent neutrino scattering (CNS) from the Sun. CYGNO is one of the first prototypes in the road map to 100-1000 m^3 of CYGNUs and will be located at the National Laboratory of Gran Sasso (LNGS), in Italy, aiming to make significant advances in the technology of single phase gas-only time projection chambers (TPC) for the application to the detection of rare scattering events. In particular it will focus on a read-out technique based on Micro Pattern Gas Detector (MPGD) amplification of the ionization and on the visible light collection with a sub-mm position resolution sCMOS (scientific COMS) camera. This type of readout - in conjunction with a fast light detection - will allow on one hand to reconstruct 3D direction of the tracks, offering accurate sensitivity to the source directionality and, on the other hand, a high particle identification capability very useful to distinguish nuclear recoils.
△ Less
Submitted 24 September, 2019; v1 submitted 14 January, 2019;
originally announced January 2019.
-
Results of the first user program on the Homogenous Thermal Neutron Source HOTNES (ENEA / INFN)
Authors:
A. Sperduti,
M. Angelone,
R. Bedogni,
G. Claps,
E. Diociaiuti,
C. Domingo,
R. Donghia,
S. Giovannella,
J. M. Gomez-Ros,
L. Irazola-Rosales,
S. Loreti,
V. Monti,
S. Miscetti,
F. Murtas,
G. Pagano,
M. Pillon,
R. Pilotti,
A. Pola,
M. Romero-Expósito,
F. Sánchez-Doblado,
O. Sans-Planell,
A. Scherillo,
E. Soldani,
M. Treccani,
A. Pietropaolo
Abstract:
The HOmogeneous Thermal NEutron Source (HOTNES) is a new type of thermal neutron irradiation assembly developed by the ENEA-INFN collaboration. The facility is fully characterized in terms of neutron field and dosimetric quantities, by either computational and experimental methods. This paper reports the results of the first "HOTNES users program", carried out in 2016, and covering a variety of th…
▽ More
The HOmogeneous Thermal NEutron Source (HOTNES) is a new type of thermal neutron irradiation assembly developed by the ENEA-INFN collaboration. The facility is fully characterized in terms of neutron field and dosimetric quantities, by either computational and experimental methods. This paper reports the results of the first "HOTNES users program", carried out in 2016, and covering a variety of thermal neutron active detectors such as scintillators, solid-state, single crystal diamond and gaseous detectors.
△ Less
Submitted 22 February, 2018;
originally announced February 2018.
-
EuPRAXIA@SPARC_LAB Design study towards a compact FEL facility at LNF
Authors:
M. Ferrario,
D. Alesini,
M. P. Anania,
M. Artioli,
A. Bacci,
S. Bartocci,
R. Bedogni,
M. Bellaveglia,
A. Biagioni,
F. Bisesto,
F. Brandi,
E. Brentegani,
F. Broggi,
B. Buonomo,
P. L. Campana,
G. Campogiani,
C. Cannaos,
S. Cantarella,
F. Cardelli,
M. Carpanese,
M. Castellano,
G. Castorina,
N. Catalan Lasheras,
E. Chiadroni,
A. Cianchi
, et al. (95 additional authors not shown)
Abstract:
On the wake of the results obtained so far at the SPARC\_LAB test-facility at the Laboratori Nazionali di Frascati (Italy), we are currently investigating the possibility to design and build a new multi-disciplinary user-facility, equipped with a soft X-ray Free Electron Laser (FEL) driven by a $\sim$1 GeV high brightness linac based on plasma accelerator modules. This design study is performed in…
▽ More
On the wake of the results obtained so far at the SPARC\_LAB test-facility at the Laboratori Nazionali di Frascati (Italy), we are currently investigating the possibility to design and build a new multi-disciplinary user-facility, equipped with a soft X-ray Free Electron Laser (FEL) driven by a $\sim$1 GeV high brightness linac based on plasma accelerator modules. This design study is performed in synergy with the EuPRAXIA design study. In this paper we report about the recent progresses in the on going design study of the new facility.
△ Less
Submitted 26 January, 2018;
originally announced January 2018.
-
A complementary compact laser based neutron source
Authors:
Alessandro Cianchi,
Carla Andreani,
Roberto Bedogni,
Giulia Festa,
Oriol Sans-Planell,
Roberto Senesi
Abstract:
Several experiments of neutron generation using high intensity laser sources, with a power exceeding 10^19W/cm^2 via TNSA (Target Normal Sheath Acceleration) or other similar methods, have been performed in the past years in different laboratories. However, so far there is no one running neutron source based on such a technology. In the framework of the Conceptual Report Design of a new accelerato…
▽ More
Several experiments of neutron generation using high intensity laser sources, with a power exceeding 10^19W/cm^2 via TNSA (Target Normal Sheath Acceleration) or other similar methods, have been performed in the past years in different laboratories. However, so far there is no one running neutron source based on such a technology. In the framework of the Conceptual Report Design of a new accelerator in the Eupraxia project we are studying the possibility to have a laser-based neutron source, not only by TNSA but also from self-injection schemes. We focus our attention on the applications in cultural heritage studies as well also on the complementary role that such a source can have in the framework of large facilities devoted to radiation production.
△ Less
Submitted 11 January, 2018;
originally announced January 2018.
-
Technical Design Report EuroGammaS proposal for the ELI-NP Gamma beam System
Authors:
O. Adriani,
S. Albergo,
D. Alesini,
M. Anania,
D. Angal-Kalinin,
P. Antici,
A. Bacci,
R. Bedogni,
M. Bellaveglia,
C. Biscari,
N. Bliss,
R. Boni,
M. Boscolo,
F. Broggi,
P. Cardarelli,
K. Cassou,
M. Castellano,
L. Catani,
I. Chaikovska,
E. Chiadroni,
R. Chiche,
A. Cianchi,
J. Clarke,
A. Clozza,
M. Coppola
, et al. (84 additional authors not shown)
Abstract:
The machine described in this document is an advanced Source of up to 20 MeV Gamma Rays based on Compton back-scattering, i.e. collision of an intense high power laser beam and a high brightness electron beam with maximum kinetic energy of about 720 MeV. Fully equipped with collimation and characterization systems, in order to generate, form and fully measure the physical characteristics of the pr…
▽ More
The machine described in this document is an advanced Source of up to 20 MeV Gamma Rays based on Compton back-scattering, i.e. collision of an intense high power laser beam and a high brightness electron beam with maximum kinetic energy of about 720 MeV. Fully equipped with collimation and characterization systems, in order to generate, form and fully measure the physical characteristics of the produced Gamma Ray beam. The quality, i.e. phase space density, of the two colliding beams will be such that the emitted Gamma ray beam is characterized by energy tunability, spectral density, bandwidth, polarization, divergence and brilliance compatible with the requested performances of the ELI-NP user facility, to be built in Romania as the Nuclear Physics oriented Pillar of the European Extreme Light Infrastructure. This document illustrates the Technical Design finally produced by the EuroGammaS Collaboration, after a thorough investigation of the machine expected performances within the constraints imposed by the ELI-NP tender for the Gamma Beam System (ELI-NP-GBS), in terms of available budget, deadlines for machine completion and performance achievement, compatibility with lay-out and characteristics of the planned civil engineering.
△ Less
Submitted 14 July, 2014;
originally announced July 2014.
-
Further investigations on the Neutron Flux Generation in a Plasma Discharge Electrolytic Cell
Authors:
R. Faccini,
A. Pilloni,
A. D. Polosa,
M. Angelone,
E. Castagna,
S. Lecci,
S. Loreti,
A. Pietropaolo,
M. Pillon,
M. Sansovini,
F. Sarto,
V. Violante,
R. Bedogni,
A. Esposito
Abstract:
Our recent paper on the "Search for Neutron Flux Generation in a Plasma Discharge Electrolytic Cell" [1] has as main goal the validation of the experiment in Ref.[2]. As a follow-up, Ref.[3] moves a set of objections on our procedure and presents argumentations on why the experiments should not yield the same results. We collect here additional material and calculations that contribute to understa…
▽ More
Our recent paper on the "Search for Neutron Flux Generation in a Plasma Discharge Electrolytic Cell" [1] has as main goal the validation of the experiment in Ref.[2]. As a follow-up, Ref.[3] moves a set of objections on our procedure and presents argumentations on why the experiments should not yield the same results. We collect here additional material and calculations that contribute to understanding the observed discrepancies. Furthermore we prove that the absence of signals from Indium activation detectors reported also for the experiment of Ref.[2] is a clear indication that neutron production does not occur.
[1] R.Faccini et al arXiv:1310.4749
[2] D.Cirillo et al, Key Engineering Materials 495, 104 (2012).
[3] A.Widom et al. arXiv:1311.2447
△ Less
Submitted 30 January, 2014;
originally announced January 2014.
-
Search for Neutron Flux Generation in a Plasma Discharge Electrolytic Cell
Authors:
R. Faccini,
A. Pilloni,
A. D. Polosa,
M. Angelone,
E. Castagna,
S. Lecci,
A. Pietropaolo,
M. Pillon,
M. Sansovini,
F. Sarto,
V. Violante,
R. Bedogni,
A. Esposito
Abstract:
Following some recent unexpected hints of neutron production in setups like high-voltage atmospheric discharges and plasma discharges in electrolytic cells, we present a measurement of the neutron flux in a configuration similar to the latter. We use two different types of neutron detectors, poly-allyl-diglicol-carbonate (PADC, aka CR-39) tracers and Indium disks. At 95% C.L. we provide an upper l…
▽ More
Following some recent unexpected hints of neutron production in setups like high-voltage atmospheric discharges and plasma discharges in electrolytic cells, we present a measurement of the neutron flux in a configuration similar to the latter. We use two different types of neutron detectors, poly-allyl-diglicol-carbonate (PADC, aka CR-39) tracers and Indium disks. At 95% C.L. we provide an upper limit of 1.5 neutrons cm^-2 s^-1 for the thermal neutron flux at ~5 cm from the center of the cell. Allowing for a higher energy neutron component the largest allowed flux is 64 neutrons cm^-2 s^-1. This upper limit is two orders of magnitude smaller than what previously claimed in an electrolytic cell plasma discharge experiment. Furthermore the behavior of the CR-39 is discussed to point our possible sources of spurious signals.
△ Less
Submitted 17 October, 2013;
originally announced October 2013.
-
IRIDE White Book, An Interdisciplinary Research Infrastructure based on Dual Electron linacs&lasers
Authors:
D. Alesini,
M. Alessandroni,
M. P. Anania,
S. Andreas,
M. Angelone,
A. Arcovito,
F. Arnesano,
M. Artioli,
L. Avaldi,
D. Babusci,
A. Bacci,
A. Balerna,
S. Bartalucci,
R. Bedogni,
M. Bellaveglia,
F. Bencivenga,
M. Benfatto,
S. Biedron,
V. Bocci,
M. Bolognesi,
P. Bolognesi,
R. Boni,
R. Bonifacio,
M. Boscolo,
F. Boscherini
, et al. (189 additional authors not shown)
Abstract:
This report describes the scientific aims and potentials as well as the preliminary technical design of IRIDE, an innovative tool for multi-disciplinary investigations in a wide field of scientific, technological and industrial applications. IRIDE will be a high intensity 'particle factory', based on a combination of a high duty cycle radio-frequency superconducting electron linac and of high ener…
▽ More
This report describes the scientific aims and potentials as well as the preliminary technical design of IRIDE, an innovative tool for multi-disciplinary investigations in a wide field of scientific, technological and industrial applications. IRIDE will be a high intensity 'particle factory', based on a combination of a high duty cycle radio-frequency superconducting electron linac and of high energy lasers. Conceived to provide unique research possibilities for particle physics, for condensed matter physics, chemistry and material science, for structural biology and industrial applications, IRIDE will open completely new research possibilities and advance our knowledge in many branches of science and technology. IRIDE will contribute to open new avenues of discoveries and to address most important riddles: What does matter consist of? What is the structure of proteins that have a fundamental role in life processes? What can we learn from protein structure to improve the treatment of diseases and to design more efficient drugs? But also how does an electronic chip behave under the effect of radiations? How can the heat flow in a large heat exchanger be optimized? The scientific potential of IRIDE is far reaching and justifies the construction of such a large facility in Italy in synergy with the national research institutes and companies and in the framework of the European and international research. It will impact also on R&D work for ILC, FEL, and will be complementarity to other large scale accelerator projects. IRIDE is also intended to be realized in subsequent stages of development depending on the assigned priorities.
△ Less
Submitted 30 July, 2013;
originally announced July 2013.
-
Characterization of a Be(p,xn) neutron source for fission yields measurements
Authors:
A. Mattera,
P. Andersson,
A. Hjalmarsson,
M. Lantz,
S. Pomp,
V. Rakopoulos,
A. Solders,
J. Valldor-Blücher,
D. Gorelov,
H. Penttilä,
S. Rinta-Antila,
A. V. Prokofiev,
E. Passoth,
R. Bedogni,
A. Gentile,
D. Bortot,
A. Esposito,
M. V. Introini,
A. Pola
Abstract:
We report on measurements performed at The Svedberg Laboratory (TSL) to characterize a proton-neutron converter for independent fission yield studies at the IGISOL-JYFLTRAP facility (Jyväskylä, Finland). A 30 MeV proton beam impinged on a 5 mm water-cooled Beryllium target. Two independent experimental techniques have been used to measure the neutron spectrum: a Time of Flight (TOF) system used to…
▽ More
We report on measurements performed at The Svedberg Laboratory (TSL) to characterize a proton-neutron converter for independent fission yield studies at the IGISOL-JYFLTRAP facility (Jyväskylä, Finland). A 30 MeV proton beam impinged on a 5 mm water-cooled Beryllium target. Two independent experimental techniques have been used to measure the neutron spectrum: a Time of Flight (TOF) system used to estimate the high-energy contribution, and a Bonner Sphere Spectrometer able to provide precise results from thermal energies up to 20 MeV. An overlap between the energy regions covered by the two systems will permit a cross-check of the results from the different techniques. In this paper, the measurement and analysis techniques will be presented together with some preliminary results.
△ Less
Submitted 2 April, 2013;
originally announced April 2013.