Showing 1–20 of 20 results for author: Demir, H V

Dual-resonance nanostructures for colour down-conversion of colloidal quantum emitters

Authors: Son Tung Ha, Emmanuel Lassalle, Xiao Liang, Thi Thu Ha Do, Ian Foo, Sushant Shendre, Emek Goksu Durmusoglu, Vytautas Valuckas, Sourav Adhikary, Ramon Paniagua-Dominguez, Hilmi Volkan Demir, Arseniy Kuznetsov

Abstract: Linear colour conversion is a process where an emitter absorbs a photon and then emits another photon with either higher or lower energy, corresponding to up- or down conversion, respectively. In this regard, the presence of a volumetric cavity plays a crucial role in enhancing absorption and photoluminescence (PL), as it allows for large volumes of interaction between the exciting photons and the… ▽ More Linear colour conversion is a process where an emitter absorbs a photon and then emits another photon with either higher or lower energy, corresponding to up- or down conversion, respectively. In this regard, the presence of a volumetric cavity plays a crucial role in enhancing absorption and photoluminescence (PL), as it allows for large volumes of interaction between the exciting photons and the emissive materials, maximising the colour conversion efficiency. Here, we present a dual resonance nanostructure made of a titanium dioxide (TiO2) subwavelength grating to enhance the colour down-conversion efficiency of green light at ~530 nm emitted by gradient alloyed CdxZn1-xSeyS1-y colloidal quantum dots (QDs) when excited with a blue light at ~460 nm. A large mode volume can be created within the QD layer by the hybridisation of the grating resonances and waveguide modes. This allows increasing mode overlap between the resonances and the QDs, resulting in large absorption and tailored emission enhancements. Particularly, we achieved polarized light emission with maximum photoluminescence enhancement of ~140 times at a specific angular direction, and a total enhancement of ~34 times within 0.55 numerical aperture (NA) of the collecting objective. The enhancement encompasses absorption enhancement, Purcell enhancement and directionality enhancement (i.e., outcoupling). We achieved total absorption of 35% for green QDs with a remarkably thin colour conversion layer of ~ 400 nm (inclusive of the TiO2 layer). This work provides a guideline for designing large-volume cavities for practical application in absorption/fluorescence enhancement, such as down colour conversion in microLED displays, detectors or photovoltaics. △ Less

Submitted 3 October, 2023; originally announced October 2023.

Comments: 37 pages, 11 figures (4 in maintext, 11 in SI)

Photoinduced transition from quasi-2D Ruddlesden-Popper to 3D halide perovskites for optical writing multicolor and light-erasable images

Authors: Sergey S. Anoshkin, Ivan I. Shishkin, Daria I. Markina, Lev S. Logunov, Hilmi Volkan Demir, Andrey L. Rogach, Anatoly P. Pushkarev, Sergey V. Makarov

Abstract: Development of advanced optical data storage, information encryption, and security labeling technologies requires low-cost materials exhibiting local, pronounced, and diverse modification of their structure-dependent optical properties under external excitation. Herein, for these purposes, we propose and develop a novel platform relying on layered lead halide Ruddlesden-Popper (quasi-2D) phases th… ▽ More Development of advanced optical data storage, information encryption, and security labeling technologies requires low-cost materials exhibiting local, pronounced, and diverse modification of their structure-dependent optical properties under external excitation. Herein, for these purposes, we propose and develop a novel platform relying on layered lead halide Ruddlesden-Popper (quasi-2D) phases that undergo a light-induced transition towards bulk (3D) halide perovskite and employ this phenomenon for the direct optical writing of various multicolor patterns. This transition causes the weakening of quantum confinement, and hence the bandgap reduction in these photoluminescent thin films. To significantly extend the color gamut of evolving photoluminescence, we make use of mixed-halide compositions exhibiting photoinduced halide segregation. As a result, the emission wavelength of the resulting films can be widely tuned across the entire 450-600 nm range depending on the illumination conditions. We show that pulsed near-infrared femtosecond laser irradiation provides high-resolution direct writing, whereas continuous-wave ultraviolet exposure is suitable for fast recording on larger scales. The luminescent micro- and macro-scale images created on such quasi-2D perovskite films can be erased during the visualization process, by which the persistence of these images to UV light exposure can be controlled and increased further with the increasing number of octahedral layers used in the perovskite stacks. This makes the proposed writing/erasing perovskite-based platform suitable for the manufacturing of both inexpensive optical data storage devices and light-erasable security labels. △ Less

Submitted 12 September, 2023; originally announced September 2023.

Near-Unity Emitting, Widely Tailorable and Stable Exciton Concentrators Built from Doubly Gradient 2D Semiconductor Nanoplatelets

Authors: Xiao Liang, Emek G. Durmusoglu, Maria Lunina, Pedro Ludwig Hernandez-Martinez, Vytautas Valuckas, Fei Yan, Yulia Lekina, Vijay Kumar Sharma, Tingting Yin, Son Tung Ha, Ze Xiang Shen, Handong Sun, Arseniy Kuznetsov, Hilmi Volkan Demir

Abstract: The strength of electrostatic interactions (EI) between electrons and holes within semiconductor nanocrystals profoundly impact the performance of their optoelectronic systems, and different optoelectronic devices demand distinct EI strength of the active medium. However, achieving a broad range, fine-tuning of the EI strength for specific optoelectronic applications is a daunting challenge, espec… ▽ More The strength of electrostatic interactions (EI) between electrons and holes within semiconductor nanocrystals profoundly impact the performance of their optoelectronic systems, and different optoelectronic devices demand distinct EI strength of the active medium. However, achieving a broad range, fine-tuning of the EI strength for specific optoelectronic applications is a daunting challenge, especially in quasi 2-dimensional core-shell semiconductor nanoplatelets (NPLs), as the epitaxial growth of the inorganic shell along the direction of the thickness that solely contributes to the quantum confined effect significantly undermines the strength of the EI. Herein we propose and demonstrate a novel doubly-gradient (DG) core-shell architecture of semiconductor NPLs for on-demand tailoring of the EI strength by controlling the localized exciton concentration via in-plane architectural modulation, demonstrated by a wide tuning of radiative recombination rate and exciton binding energy. Moreover, these exciton-concentration-engineered DG NPLs also exhibit a near-unity quantum yield, remarkable thermal and photo stability, as well as considerably suppressed self-absorption. As proof-of-concept demonstrations, highly efficient color converters and high-performance light-emitting diodes (external quantum efficiency: 16.9%, maximum luminance: 43,000 cd/m2) have been achieved based on the DG NPLs. This work thus opens up new avenues for developing high-performance colloidal optoelectronic device applications. △ Less

Submitted 12 June, 2023; originally announced June 2023.

Polariton lasing in Mie-resonant perovskite nanocavity

Authors: M. A. Masharin, D. Khmelevskaia, V. I. Kondratiev, D. I. Markina, A. D. Utyushev, D. M. Dolgintsev, A. D. Dmitriev, V. A. Shahnazaryan, A. P. Pushkarev, F. Isik, I. V. Iorsh, I. A. Shelykh, H. V. Demir, A. K. Samusev, S. V. Makarov

Abstract: Deeply subwavelength lasers (or nanolasers) are highly demanded for compact on-chip bioimaging and sensing at the nanoscale. One of the main obstacles for the development of single-particle nanolasers with all three dimensions shorter than the emitting wavelength in the visible range is the high lasing thresholds and the resulting overheating. Here we exploit exciton-polariton condensation and mir… ▽ More Deeply subwavelength lasers (or nanolasers) are highly demanded for compact on-chip bioimaging and sensing at the nanoscale. One of the main obstacles for the development of single-particle nanolasers with all three dimensions shorter than the emitting wavelength in the visible range is the high lasing thresholds and the resulting overheating. Here we exploit exciton-polariton condensation and mirror-image Mie modes in a cuboid CsPbBr$_3$ nanoparticle to achieve coherent emission at the visible wavelength of around 0.53~$μ$m from its ultra-small ($\approx$0.007$μ$m$^3$ or $\approxλ^3$/20) semiconductor nanocavity. The polaritonic nature of the emission from the nanocavity localized in all three dimensions is proven by direct comparison with corresponding one-dimensional and two-dimensional waveguiding systems with similar material parameters. Such a deeply subwavelength nanolaser is enabled not only by the high values for exciton binding energy ($\approx$35 meV), refractive index ($>$2.5 at low temperature), and luminescence quantum yield of CsPbBr$_3$, but also by the optimization of polaritons condensation on the Mie resonances. Moreover, the key parameters for optimal lasing conditions are intermode free spectral range and phonons spectrum in CsPbBr$_3$, which govern polaritons condensation path. Such chemically synthesized colloidal CsPbBr$_3$ nanolasers can be easily deposited on arbitrary surfaces, which makes them a versatile tool for integration with various on-chip systems. △ Less

Submitted 22 May, 2023; originally announced May 2023.

Comments: 29 pages, 19 Figures

Room-temperature exceptional-point-driven polariton lasing from perovskite metasurface

Authors: M. A. Masharin, A. K. Samusev, A. A. Bogdanov, I. V. Iorsh, H. V. Demir, S. V. Makarov

Abstract: Excitons in lead bromide perovskites exhibit high binding energy and high oscillator strength, allowing for a strong light-matter coupling regime in the perovskite-based cavities localizing photons at the nanoscale. This opens up the way for the realization of exciton-polariton Bose-Einstein condensation and polariton lasing at room temperature -- the inversion-free low-threshold stimulated emissi… ▽ More Excitons in lead bromide perovskites exhibit high binding energy and high oscillator strength, allowing for a strong light-matter coupling regime in the perovskite-based cavities localizing photons at the nanoscale. This opens up the way for the realization of exciton-polariton Bose-Einstein condensation and polariton lasing at room temperature -- the inversion-free low-threshold stimulated emission. However, polariton lasing in perovskite planar photon cavities without Bragg mirrors has not yet been observed and proved experimentally. In this work, we employ perovskite metasurface, fabricated with nanoimprint lithography, supporting so-called exceptional points to demonstrate the room-temperature polariton lasing. The exceptional points in exciton-polariton dispersion of the metasurface appear upon optically pumping in the nonlinear regime in the spectral vicinity of a symmetry-protected bound state in the continuum providing high mode confinement with the enhanced local density of states beneficial for polariton condensation. The observed lasing emission possesses high directivity with a divergence angle of around 1$^\circ$ over one axis. The employed nanoimprinting approach for solution-processable large-scale polariton lasers is compatible with various planar photonic platforms suitable for on-chip integration. △ Less

Submitted 19 April, 2023; v1 submitted 26 December, 2022; originally announced December 2022.

Comments: 12 pages, 3 figures

Hybrid Dielectric-Plasmonic Nanoantenna with Multiresonances for Subwavelength Photon Sources

Authors: Pavel A. Dmitriev, Emmanuel Lassalle, Lu Ding, Zhenying Pan, Darren C. J. Neo, Vytautas Valuckas, Ramón Paniagua-Dominguez, Joel K. W. Yang, Hilmi Volkan Demir, Arseniy I. Kuznetsov

Abstract: The enhancement of the photoluminescence of quantum dots induced by an optical nanoantenna has been studied considerably, but there is still significant interest in optimizing and miniaturizing such structures, especially when accompanied by an experimental demonstration. Most of the realizations use plasmonic platforms, and some also use all-dielectric nanoantennas, but hybrid dielectric-plasmoni… ▽ More The enhancement of the photoluminescence of quantum dots induced by an optical nanoantenna has been studied considerably, but there is still significant interest in optimizing and miniaturizing such structures, especially when accompanied by an experimental demonstration. Most of the realizations use plasmonic platforms, and some also use all-dielectric nanoantennas, but hybrid dielectric-plasmonic (subwavelength) nanostructures have been very little explored. In this paper, we propose and demonstrate single subwavelength hybrid dielectric-plasmonic optical nanoantennas coupled to localized quantum dot emitters that constitute efficient and bright unidirectional photon sources under optical pumping. To achieve this, we devised a silicon nanoring sitting on a gold mirror with a 10 nm gap in-between, where an assembly of colloidal quantum dots is embedded. Such a structure supports both (radiative) antenna mode and (nonradiative) gap mode resonances, which we exploit for the dual purpose of out-coupling the light emitted by the quantum dots into the far-field with out-of-plane directivity, and for enhancing the excitation of the dots by the optical pump. Moreover, almost independent control of the resonance spectral positions can be achieved by simple tuning of geometrical parameters such as the ring inner and outer diameters, allowing us to conveniently adjust these resonances with respect to the quantum dots emission and absorption wavelengths. Using the proposed architecture, we obtain experimentally average fluorescence enhancement factors up to $654\times$ folds mainly due to high radiative efficiencies, and associated with a directional emission of the photoluminescence into a cone of $\pm 17\degree$ in the direction normal to the sample plane. We believe the solution presented here to be viable and relevant for the next generation of light-emitting devices. △ Less

Submitted 28 February, 2023; v1 submitted 27 June, 2022; originally announced June 2022.

Comments: 39 pages, 4 figures

Plasmon-Enhanced Photoresponse of a Single Silver Nanowire and its Networked Devices

Authors: Mohammadali Razeghi, Merve Üstünçelik, Farzan Shabani, Hilmi Volkan Demir, T. Serkan Kasırga

Abstract: Photo-bolometric effect is critically important in optoelectronic structures and devices employing metallic electrodes with nanoscale features due to heating caused by the plasmonic field enhancement. One peculiar case is individual silver nanowires (Ag NWs) and their networks. Ag NW-networks exhibit excellent thermal, electrical, and mechanical properties, providing a simple yet reliable alternat… ▽ More Photo-bolometric effect is critically important in optoelectronic structures and devices employing metallic electrodes with nanoscale features due to heating caused by the plasmonic field enhancement. One peculiar case is individual silver nanowires (Ag NWs) and their networks. Ag NW-networks exhibit excellent thermal, electrical, and mechanical properties, providing a simple yet reliable alternative to common flexible transparent electrode materials used in optoelectronic devices. To date there have been no reports on the photoresponse of Ag NWs. In this work, we show that a single Ag NW and a network of such Ag NWs possess a significant, intrinsic photoresponse thanks to the photo-bolometric effect, as directly observed and measured using scanning photocurrent microscopy. Surface plasmon polaritons (SPP) created at the contact metals or plasmons created at the nanowire-metal structures cause heating at the junctions where a plasmonic field enhancement is possible. The local heating of the Ag NWs results in negative photoconductance due to the bolometric effect. Here an open-circuit response due to the plasmon-enhanced Seebeck effect was recorded at the NW-metal contact junctions. The SPP-assisted bolometric effect is found to be further enhanced by decorating the Ag NWs with Ag nanoparticles. These observations are relevant to the use of metallic nanowires in plasmonic applications in particular and in optoelectronics in general. Our findings may pave the path for plasmonics enabled sensing without a spectroscopic detection. △ Less

Submitted 23 January, 2022; originally announced January 2022.

Highly-directional, highly-efficient solution-processed light-emitting diodes of all-face-down oriented colloidal quantum wells

Authors: Hamed Dehghanpour Baruj, Iklim Yurdakul, Betul Canimkurbey, Ahmet Tarik Isik, Farzan Shabani, Savas Delikanli, Sushant Shendre, Onur Erdem, Furkan Isik, Hilmi Volkan Demir

Abstract: Semiconductor colloidal quantum wells (CQWs) make an exciting quasi-2D class of nanocrystals thanks to their unique properties including their highly anisotropic optical transition dipole moment (TDM). Thus, employing a film of CQWs with face-down orientation as an emissive layer (EML) in an electroluminescent device is expected to substantially boost photon outcoupling efficiency. Here, we show a… ▽ More Semiconductor colloidal quantum wells (CQWs) make an exciting quasi-2D class of nanocrystals thanks to their unique properties including their highly anisotropic optical transition dipole moment (TDM). Thus, employing a film of CQWs with face-down orientation as an emissive layer (EML) in an electroluminescent device is expected to substantially boost photon outcoupling efficiency. Here, we show all-solution-processed colloidal quantum well light-emitting diodes (CQW-LEDs) using a single all-face-down oriented self-assembled monolayer (SAM) film of CQWs that enables a high level of in-plane (IP) TDMs of 92%. This SAM film significantly enhances the outcoupling efficiency from 22% (of standard randomly-oriented emitters) to 34% (of face-down oriented emitters) and charge injection efficiency. This SAM-CQW-LED architecture enables a record high level of external quantum efficiency of 18.1% for the solution-processed type of CQW-LEDs, putting their efficiency performance on par with the hybrid organic-inorganic evaporation-based CQW-LEDs and all other best solution-processed LEDs. In addition, this architecture provides a high maximum brightness of 19,800 cd/m2 with a long operational lifetime of 247 h at 100 cd/m2 along with saturated deep-red emission (651 nm). These findings indicate the effectiveness of oriented self-assembly of CQWs as electrically-driven emissive layers in improving outcoupling and external quantum efficiencies in the CQW-LEDs. △ Less

Submitted 21 January, 2022; originally announced January 2022.

Ultrahigh Green and Red Optical Gain Cross-sections from Solutions of Colloidal Quantum Well Heterostructures

Authors: Savas Delikanli, Onur Erdem, Furkan Isik, Hameed Dehghanpour Baruj, Farzan Shabani, Huseyin Bilge Yagci, Hilmi Volkan Demir

Abstract: Optical gain in solution, which provides high photostability as a result of continuous regeneration of the gain medium, is extremely attractive for optoelectronic applications. Here, we propose and demonstrate amplified spontaneous emission (ASE) in solution with ultralow thresholds of 30 mikroJ/cm2 in red and of 44 mikroJ/cm2 in green from engineered colloidal quantum well (CQW) heterostructures.… ▽ More Optical gain in solution, which provides high photostability as a result of continuous regeneration of the gain medium, is extremely attractive for optoelectronic applications. Here, we propose and demonstrate amplified spontaneous emission (ASE) in solution with ultralow thresholds of 30 mikroJ/cm2 in red and of 44 mikroJ/cm2 in green from engineered colloidal quantum well (CQW) heterostructures. For this purpose, CdSe/CdS core/crown CQWs, designed to hit the green region, and CdSe/CdS/CdxZn1-xS core/crown/gradient-alloyed shell CQWs, further tuned to reach the red region by shell alloying, were employed to achieve high-performance ASE in the visible. The net modal gain of these CQWs reaches 530 cm-1 for the green and 201 cm-1 for the red, two orders of magnitude larger than those of colloidal quantum dots (QDs) in solution owing to intrinsically larger gain cross-sections of these CQWs. To explain the root cause for ultrahigh gain coefficient in solution, we show that for the first time that the gain cross-sections of these CQWs is 3.3x10-14 cm2 in the green and 1.3x10-14 cm2 in the red which are two orders magnitude larger compared to those of CQDs. These findings confirm the extraordinary prospects of these solution-processed CQWs as solution-based optical gain media in lasing applications. △ Less

Submitted 16 December, 2020; originally announced December 2020.

'Meta-atomless' architecture based on an irregular continuous fabric of coupling-tuned identical nanopillars enables highly efficient and achromatic metasurfaces

Authors: Hüseyin Bilge Yağcı, Hilmi Volkan Demir

Abstract: Metasurfaces are subwavelength-thick constructs, consisting of discrete meta-atoms, providing discretized levels of phase accumulation that collectively approximate a designed optical functionality. The meta-atoms utilizing geometric phase with polarization-converting structures produced encouraging implementations of optical components including metalenses. However, to date, a pending and fundame… ▽ More Metasurfaces are subwavelength-thick constructs, consisting of discrete meta-atoms, providing discretized levels of phase accumulation that collectively approximate a designed optical functionality. The meta-atoms utilizing geometric phase with polarization-converting structures produced encouraging implementations of optical components including metalenses. However, to date, a pending and fundamental problem of this approach has been the low device efficiency that such resulting components suffer, an unwanted side effect of large lattice constants used for preventing inter-coupling of their meta-atoms. Although the use of near-field coupling for tuning electromagnetic resonances found its use in constructing efficient narrow-band designs, such structures fell short of providing high efficiency over a broad spectrum. Here, we propose and show that tightly packed fabric of identical dielectric nanopillar waveguides with continuously-tuned inter-coupling distances make excellent and complete achromatic metasurface elements. This architecture enables the scatterers to interact with the incoming wave extremely efficiently. As a proof-of-concept demonstration, we showed an achromatic cylindrical metalens, constructed from strongly coupled dielectric nanopillars of a single geometry as continuously-set phase elements in a 'meta-atomless' fashion, working in the entirety of 400-700 nm band. This metalens achieves over 85 percent focusing efficiency across this whole spectral range. To combat polarization sensitivity, we used hexagonally stacked nanopillars to build up a polarization-independent scatterer library. Finally, a circular metalens with polarization-independent operation and achromatic focusing was obtained. This is a paradigm shift in making an achromatic metasurface architecture by wovening identical nanopillars coupled into an irregular lattice constructed via careful tuning. △ Less

Submitted 21 February, 2021; v1 submitted 11 December, 2020; originally announced December 2020.

Comments: 14 pages, 5 figures, 1 table

Single-mode lasing from a single 7 nm thick monolayer of colloidal quantum wells in a monolithic microcavity

Authors: Sina Foroutan-Barenji, Onur Erdem, Savas Delikanli, Huseyin Bilge Yagci, Negar Gheshlaghi, Yemliha Altintas, Hilmi Volkan Demir

Abstract: In this work, we report the first account of monolithically-fabricated vertical cavity surface emitting lasers (VCSELs) of densely-packed, orientation-controlled, atomically flat colloidal quantum wells (CQWs) using a self-assembly method and demonstrate single-mode lasing from a record thin colloidal gain medium with a film thickness of 7 nm under femtosecond optical excitation. We used specially… ▽ More In this work, we report the first account of monolithically-fabricated vertical cavity surface emitting lasers (VCSELs) of densely-packed, orientation-controlled, atomically flat colloidal quantum wells (CQWs) using a self-assembly method and demonstrate single-mode lasing from a record thin colloidal gain medium with a film thickness of 7 nm under femtosecond optical excitation. We used specially engineered CQWs to demonstrate these hybrid CQW-VCSELs consisting of only a few layers to a single monolayer of CQWs and achieved the lasing from these thin gain media by thoroughly modeling and implementing a vertical cavity consisting of distributed Bragg reflectors with an additional dielectric layer for mode tuning. Accurate spectral and spatial alignment of the cavity mode with the CQW films was secured with the help of full electromagnetic computations. While overcoming the long-pending problem of limited electrical conductivity in thicker colloidal films, such ultra-thin colloidal gain media can help enabling fully electrically-driven colloidal lasers. △ Less

Submitted 16 October, 2020; originally announced October 2020.

Self-Resonant u-Lasers of Colloidal Quantum Wells Constructed by Direct Deep Patterning

Authors: Negar Gheshlaghi, Sina Foroutan-Barenji, Onur Erdem, Yemliha Altintas, Farzan Shabani, Muhammad Hamza Humayun, Hilmi Volkan Demir

Abstract: Here, the first account of self-resonant fully-colloidal u-lasers made from colloidal quantum well (CQW) solution is reported. A deep patterning technique is developed to fabricate well-defined high aspect-ratio on-chip CQW resonators made of grating waveguides and in-plane reflectors. CQWs of the patterned layers are closed-packed with sharp edges and residual-free lifted-off surfaces. Additional… ▽ More Here, the first account of self-resonant fully-colloidal u-lasers made from colloidal quantum well (CQW) solution is reported. A deep patterning technique is developed to fabricate well-defined high aspect-ratio on-chip CQW resonators made of grating waveguides and in-plane reflectors. CQWs of the patterned layers are closed-packed with sharp edges and residual-free lifted-off surfaces. Additionally, the method is successfully applied to various nanoparticles including colloidal quantum dots and metal nanoparticles. It is observed that the patterning process does not affect the nanocrystals (NCs) immobilized in the attained patterns and different physical and chemical properties of the NCs remain pristine. Thanks to capability of the proposed patterning method, patterns of NCs with sub-wavelength lateral feature size and micron-scale height are fabricated in the aspect ratios of 1:15 (<100 nm lateral patterned features to >1.5 μm film thickness). The fabricated waveguide-coupled laser, enabling tight optical confinement, assures in-plane lasing. The spectral characteristics of the designed CQW resonator structure are well supported with a numerical model of full electromagnetic solutions. Such directly deep-patterned self-resonant u-lasers of CQWs hold great promise for on-chip integration to photonic circuits. △ Less

Submitted 13 October, 2020; v1 submitted 3 October, 2020; originally announced October 2020.

Orientation-Controlled Construction of Superstructures of Atomically-Flat Nanocrystals: Pushing the Limits of Ultra-Thin Colloidal Gain Media

Authors: Onur Erdem, Sina Foroutan, Negar Gheshlaghi, Burak Guzelturk, Yemliha Altintas, Hilmi Volkan Demir

Abstract: We propose and demonstrate a method for the construction of highly uniform, multilayered, orientation-controlled superstructures of CdSe/CdZnS core/shell colloidal nanoplatelets (NPLs) using bi-phase liquid interface. These atomically-flat nanocrystals are sequentially deposited, all face-down onto a solid substrate, into slabs having monolayer-precise thickness and excellent homogeneity over seve… ▽ More We propose and demonstrate a method for the construction of highly uniform, multilayered, orientation-controlled superstructures of CdSe/CdZnS core/shell colloidal nanoplatelets (NPLs) using bi-phase liquid interface. These atomically-flat nanocrystals are sequentially deposited, all face-down onto a solid substrate, into slabs having monolayer-precise thickness and excellent homogeneity over several tens of cm2 areas. Owing to the near-unity surface coverage and film uniformity of this deposition technique, amplified spontaneous emission (ASE) is observed from an uncharacteristically thin colloidal film having only 6 layers of NPLs, which corresponds to a mere 42 nm thickness. Furthermore, systematic studies of optical gain properties of these NPL superstructures constructed having precise numbers of NPL layers tuned from 6 to 15 revealed the reduction in the gain threshold with the increasing number of NPL monolayers, along with a continuous spectral shift in the position of the ASE peak (by ~18 nm). These observations can be well explained by the variation of the optical field confinement factor with the NPL waveguide thickness and propagation wavelength. This work demonstrates the possibility of fabricating thickness-tunable, large-area three-dimensional superstructures made of NPL building blocks, which can be additively constructed one monolayer at a time. The proposed technique can also be extended to build hybrid NPL films of mixed orientations and allow for precise large-area device engineering. △ Less

Submitted 6 May, 2020; originally announced May 2020.

Comments: 23 pages, 4 figures

Lasing action in single subwavelength particles supporting supercavity modes

Authors: Vasilii Mylnikov, Son Tung Ha, Zhenying Pan, Vytautas Valuckas, Ramon Paniagua-Dominguez, Hilmi Volkan Demir, Arseniy I. Kuznetsov

Abstract: On-chip light sources are critical for the realization of fully integrated photonic circuitry. So far, semiconductor miniaturized lasers have been mainly limited to sizes on the order of a few microns. Further reduction of sizes is challenging fundamentally due to the associated radiative losses. While using plasmonic metals helps to reduce radiative losses and sizes, they also introduce Ohmic los… ▽ More On-chip light sources are critical for the realization of fully integrated photonic circuitry. So far, semiconductor miniaturized lasers have been mainly limited to sizes on the order of a few microns. Further reduction of sizes is challenging fundamentally due to the associated radiative losses. While using plasmonic metals helps to reduce radiative losses and sizes, they also introduce Ohmic losses hindering real improvements. In this work, we show that, making use of quasi-bound states in the continuum, or supercavity modes, we circumvent these fundamental issues and realize the smallest purely semiconductor nanolaser thus far. Here, the nanolaser structure is based on a single semiconductor nanocylinder that intentionally takes advantage of the destructive interference between two supported optical modes, namely Fabry-Perot and Mie modes, to obtain a significant enhancement in the quality factor of the cavity. We experimentally demonstrate the concept and obtain optically pumped lasing action using GaAs at cryogenic temperatures. The optimal nanocylinder size is as small as 500 nm in diameter and only 330 nm in height with a lasing wavelength around 825 nm, corresponding to a size-to-wavelength ratio around 0.6. The obtained results pave the way for the development of smaller on-chip light sources free of Ohmic losses, which may find applications in the future photonic circuits. △ Less

Submitted 9 March, 2020; originally announced March 2020.

Comments: 29 pages, 9 figures

Journal ref: ACS Nano (2020)

Control of LED Emission with Functional Dielectric Metasurfaces

Authors: Egor Khaidarov, Zhengtong Liu, Ramon Paniagua-Dominguez, Son Tung Ha, Vytautas Valuckas, Xinan Liang, Yuriy Akimov, Ping Bai, Ching Eng Png, Hilmi Volkan Demir, Arseniy I. Kuznetsov

Abstract: The improvement of light-emitting diodes (LEDs) is one of the major goals of optoelectronics and photonics research. While emission rate enhancement is certainly one of the targets, in this regard, for LED integration to complex photonic devices, one would require to have, additionally, precise control of the wavefront of the emitted light. Metasurfaces are spatial arrangements of engineered scatt… ▽ More The improvement of light-emitting diodes (LEDs) is one of the major goals of optoelectronics and photonics research. While emission rate enhancement is certainly one of the targets, in this regard, for LED integration to complex photonic devices, one would require to have, additionally, precise control of the wavefront of the emitted light. Metasurfaces are spatial arrangements of engineered scatters that may enable this light manipulation capability with unprecedented resolution. Most of these devices, however, are only able to function properly under irradiation of light with a large spatial coherence, typically normally incident lasers. LEDs, on the other hand, have angularly broad, Lambertian-like emission patterns characterized by a low spatial coherence, which makes the integration of metasurface devices on LED architectures extremely challenging. A novel concept for metasurface integration on LED is proposed, using a cavity to increase the LED spatial coherence through an angular collimation. Due to the resonant character of the cavity, extending the spatial coherence of the emitted light does not come at the price of any reduction in the total emitted power. The experimental demonstration of the proposed concept is implemented on a GaP LED architecture including a hybrid metallic-Bragg cavity. By integrating a silicon metasurface on top we demonstrate two different functionalities of these compact devices: directional LED emission at a desired angle and LED emission of a vortex beam with an orbital angular momentum. The presented concept is general, being applicable to other incoherent light sources and enabling metasurfaces designed for plane waves to work with incoherent light emitters. △ Less

Submitted 18 July, 2019; originally announced July 2019.

Comments: 29 pages, 6 figures

Sub-single exciton optical gain threshold in colloidal semiconductor quantum wells with gradient alloy shelling

Authors: Nima Taghipour, Savas Delikanli, Sushant Shendre, Mustafa Sak, Mingjie Li, Furkan Isik, Ibrahim Tanriover, Burak Guzelturk, Tze Chien Sum, Hilmi Volkan Demir

Abstract: Colloidal semiconductor quantum wells have emerged as a promising material platform for use in solution-processable light-generation including colloidal lasers. However, application relying on their optical gain suffer from a fundamental complication due to multi-excitonic nature of light amplification in common II-VI semiconductor nanocrystals. This undesirably increases the optical gain threshol… ▽ More Colloidal semiconductor quantum wells have emerged as a promising material platform for use in solution-processable light-generation including colloidal lasers. However, application relying on their optical gain suffer from a fundamental complication due to multi-excitonic nature of light amplification in common II-VI semiconductor nanocrystals. This undesirably increases the optical gain threshold and shortens the net gain lifetime because of fast nonradiative Auger decay. Here, we demonstrate sub-single exciton level of optical gain threshold in specially engineered CdSe/CdS@CdZnS core/crown@gradient alloyed shell colloidal quantum wells. This sub-single exciton ensemble-averaged gain threshold of Ng = 0.80 (per particle) resulting from impeded Auger recombination along with a large absorption cross-section of quantum wells enables us to observe the amplified spontaneous emission starting at a low pump fluence of 800 nJ cm-2, at least three-folds better than the previously best reported values among all colloidal semiconductor nanocrystals. Moreover, long optical gain lifetimes of 800 ps accompanied with modal gain coefficients of 2,000 cm-1 are achieved. Finally, using these gradient shelled quantum wells, we show a vertical cavity surface-emitting colloidal laser operating at an ultralow lasing threshold of 7.5 micro-joule cm-2. These results represent a significant step towards the realization of solution-processable electrically-driven colloidal lasers. △ Less

Submitted 17 June, 2019; originally announced June 2019.

Anomalous Spectral Characteristics of Ultrathin sub-nm Colloidal CdSe Nanoplatelets

Authors: Sumanta Bose, Savas Delikanli, Aydan Yeltik, Manoj Sharma, Onur Erdem, Cuong Dang, Weijun Fan, Dao Hua Zhang, Hilmi Volkan Demir

Abstract: We demonstrate high quantum yield broad photoluminescence emission of ultrathin sub-nanometer CdSe nanoplatelets (two-monolayer). They also exhibit polarization-characterized lateral size dependent anomalous heavy hole and light/split-off hole absorption intensities. We demonstrate high quantum yield broad photoluminescence emission of ultrathin sub-nanometer CdSe nanoplatelets (two-monolayer). They also exhibit polarization-characterized lateral size dependent anomalous heavy hole and light/split-off hole absorption intensities. △ Less

Submitted 30 October, 2017; originally announced February 2018.

Comments: Published in Conference on Lasers and Electro-Optics (CLEO): Science and Innovations 2017, San Jose, CA, USA, 14-19 May 2017 (2 pages, 3 figures)

Journal ref: S. Bose, S. Delikanli, A. Yeltik, M. Sharma, O. Erdem, C. Dang, W. Fan, D. H. Zhang, and H. V. Demir, in Conference on Lasers and Electro-Optics, OSA Technical Digest (online) (Optical Society of America, 2017), paper SM1K.2

Highly efficient visible colloidal lead-halide perovskite nanocrystal light-emitting diodes

Authors: Fei Yan, Jun Xing, Guichuan Xing, Lina Quan, Swee Tiam Tan, Jiaxin Zhao, Rui Su, Lulu Zhang, Shi Chen, Yawen Zhao, Alfred Huan, Edward H. Sargent, Qihua Xiong, Hilmi Volkan Demir

Abstract: Lead-halide perovskites have been attracting attention for potential use in solid-state lighting. Following the footsteps of solar cells, the field of perovskite light-emitting diodes (PeLEDs) has been growing rapidly. Their application prospects in lighting, however, remain still uncertain due to a variety of shortcomings in device performance including their limited levels of luminous efficiency… ▽ More Lead-halide perovskites have been attracting attention for potential use in solid-state lighting. Following the footsteps of solar cells, the field of perovskite light-emitting diodes (PeLEDs) has been growing rapidly. Their application prospects in lighting, however, remain still uncertain due to a variety of shortcomings in device performance including their limited levels of luminous efficiency achievable thus far. Here we show high-efficiency PeLEDs based on colloidal perovskite nanocrystals (PeNCs) synthesized at room temperature possessing dominant first-order excitonic radiation (enabling a photoluminescence quantum yield of 71% in solid film), unlike in the case of bulk perovskites with slow electron-hole bimolecular radiative recombination (a second-order process). In these PeLEDs, by reaching charge balance in the recombination zone, we find that the Auger nonradiative recombination, with its significant role in emission quenching, is effectively suppressed in low driving current density range. In consequence, these devices reach a record high maximum external quantum efficiency of 12.9% reported to date and an unprecedentedly high power efficiency of 30.3 lm W-1 at luminance levels above 1000 cd m-2 as required for various applications. These findings suggest that, with feasible levels of device performance, the PeNCs hold great promise for their use in LED lighting and displays. △ Less

Submitted 31 January, 2018; originally announced January 2018.

Temperature-dependent Optoelectronic Properties of Quasi-2D Colloidal Cadmium Selenide Nanoplatelets

Authors: Sumanta Bose, Sushant Shendre, Zhigang Song, Vijay Kumar Sharma, Dao Hua Zhang, Cuong Dang, Weijun Fan, Hilmi Volkan Demir

Abstract: Colloidal Cadmium Selenide (CdSe) nanoplatelets (NPLs) are a recently developed class of efficient luminescent nanomaterial suitable for optoelectronic device applications. A change in temperature greatly affects their electronic bandstructure and luminescence properties. It is important to understand how-and-why the characteristics of NPLs are influenced, particularly at elevated temperature, whe… ▽ More Colloidal Cadmium Selenide (CdSe) nanoplatelets (NPLs) are a recently developed class of efficient luminescent nanomaterial suitable for optoelectronic device applications. A change in temperature greatly affects their electronic bandstructure and luminescence properties. It is important to understand how-and-why the characteristics of NPLs are influenced, particularly at elevated temperature, where both reversible and irreversible quenching processes come into picture. Here we present a study on the effect of elevated temperature on the characteristics of colloidal CdSe NPLs. We used an effective-mass envelope function theory based 8-band k$\cdot$p model and density-matrix theory considering exciton-phonon interaction. We observed the photoluminescence (PL) spectra at various temperatures for their photon emission energy, PL linewidth and intensity by considering the exciton-phonon interaction with both acoustic and optical phonons using Bose-Einstein statistical factors. With rise in temperature we observed a fall in the transition energy (emission redshift), matrix element, Fermi factor and quasi Fermi separation, with reduction in intraband state gaps and increased interband coupling. Also, there was a fall in the PL intensity, along with spectral broadening due to an intraband scattering effect. The predicted transition energy values and simulated PL spectra at varying temperatures exhibit appreciable consistency with experimental results. Our findings have important implications for application of NPLs in optoelectronic devices, such as NPL lasers and LEDs, operating much above room temperature. △ Less

Submitted 25 October, 2017; originally announced October 2017.

Comments: Published in Royal Society of Chemistry, Nanoscale (12 pages, 9 figures)

Journal ref: Sumanta Bose et al., Nanoscale, 2017,9, 6595-6605

Plasmonic Metastructures and Nanocomposites with a Narrow Transparency Window in a Broad Extinction Spectrum

Authors: Hui Zhang, Hilmi Volkan Demir, Alexander O. Govorov

Abstract: We propose and describe plasmonic nanomaterials with unique optical properties. These nanostructured materials strongly attenuate light in a broad wavelength interval ranged from 400 nm to 5 um but exhibit a narrow transparency window centered at a given wavelength. The main elements are nanorods and nano-crosses of variable sizes. The nanomaterial can be designed as a solution, nanocomposite film… ▽ More We propose and describe plasmonic nanomaterials with unique optical properties. These nanostructured materials strongly attenuate light in a broad wavelength interval ranged from 400 nm to 5 um but exhibit a narrow transparency window centered at a given wavelength. The main elements are nanorods and nano-crosses of variable sizes. The nanomaterial can be designed as a solution, nanocomposite film, metastructure or aerosol. The principle of the formation of the transparency window in the abroad extinction spectrum is based on the narrow lines of longitudinal plasmons of single nanorods and nanorod complexes. To realize the spectrum with a transmission window, we design a nanocomposite material as a mixture of nanorods of different sizes. Simultaneously, we exclude nanorods of certain length from the nanorod ensemble. The width of the plasmonic transparency window is determined by the intrinsic and radiative broadenings of the nanocrystal plasmons. We also describe the effect of narrowing of the transparency window with increasing the concentration of nanocrystals. Two well-established technologies can be used to fabricate such nano- and metamaterials, the colloidal synthesis and lithography. Nanocomposites proposed here can be used as optical materials and coatings for shielding of electromagnetic radiation in a wide spectral interval with a simultaneous possibility of communication using a narrow transparency window. △ Less

Submitted 10 June, 2014; originally announced June 2014.

Comments: 43 pages