-
Plasmon-Enhanced Photoresponse of a Single Silver Nanowire and its Networked Devices
Authors:
Mohammadali Razeghi,
Merve Üstünçelik,
Farzan Shabani,
Hilmi Volkan Demir,
T. Serkan Kasırga
Abstract:
Photo-bolometric effect is critically important in optoelectronic structures and devices employing metallic electrodes with nanoscale features due to heating caused by the plasmonic field enhancement. One peculiar case is individual silver nanowires (Ag NWs) and their networks. Ag NW-networks exhibit excellent thermal, electrical, and mechanical properties, providing a simple yet reliable alternat…
▽ More
Photo-bolometric effect is critically important in optoelectronic structures and devices employing metallic electrodes with nanoscale features due to heating caused by the plasmonic field enhancement. One peculiar case is individual silver nanowires (Ag NWs) and their networks. Ag NW-networks exhibit excellent thermal, electrical, and mechanical properties, providing a simple yet reliable alternative to common flexible transparent electrode materials used in optoelectronic devices. To date there have been no reports on the photoresponse of Ag NWs. In this work, we show that a single Ag NW and a network of such Ag NWs possess a significant, intrinsic photoresponse thanks to the photo-bolometric effect, as directly observed and measured using scanning photocurrent microscopy. Surface plasmon polaritons (SPP) created at the contact metals or plasmons created at the nanowire-metal structures cause heating at the junctions where a plasmonic field enhancement is possible. The local heating of the Ag NWs results in negative photoconductance due to the bolometric effect. Here an open-circuit response due to the plasmon-enhanced Seebeck effect was recorded at the NW-metal contact junctions. The SPP-assisted bolometric effect is found to be further enhanced by decorating the Ag NWs with Ag nanoparticles. These observations are relevant to the use of metallic nanowires in plasmonic applications in particular and in optoelectronics in general. Our findings may pave the path for plasmonics enabled sensing without a spectroscopic detection.
△ Less
Submitted 23 January, 2022;
originally announced January 2022.
-
Synthesis, electric-field induced phase transitions and memristive properties of spontaneously ion intercalated two-dimensional MnO$_2$
Authors:
Hamid Reza Rasouli,
Jeongho Kim,
Naveed Mehmood,
Ali Sheraz,
Min-kyung Jo,
Seungwoo Song,
Kibum Kang,
T. Serkan Kasırga
Abstract:
Two-dimensional (2D) materials are suitable hosts for the intercalation of extrinsic guest ions such as Li+, Na+ and K+ as the interlayer coupling is weak. This allows ion intercalation engineering of 2D materials, which may be a key to advancing technological applications in energy storage, neuromorphic electronics, and bioelectronics. However, ions that are extrinsic to the host materials posses…
▽ More
Two-dimensional (2D) materials are suitable hosts for the intercalation of extrinsic guest ions such as Li+, Na+ and K+ as the interlayer coupling is weak. This allows ion intercalation engineering of 2D materials, which may be a key to advancing technological applications in energy storage, neuromorphic electronics, and bioelectronics. However, ions that are extrinsic to the host materials possess challenges in fabrication of devices as there are extra steps of ion intercalation. This results in degradation of the long-term stability of the intercalated atomically thin structures. Here, we introduce large-area single-crystal ultra-thin layered MnO$_2$ via chemical vapor deposition, spontaneously intercalated by potassium ions during the synthesis. We studied the ultra-thin 2D K-MnO$_2$ in detail and showed that charge transport in these crystals is dominated by motion of hydrated potassium ions in the interlayer space. Moreover, K-MnO$_2$ crystals exhibit reversible layered-to-spinel phase transition accompanied by an optical contrast change based on the electrical and optical modulation of the potassium and the interlayer water concentration. We used the electric field driven ionic motion in K-MnO$_2$ based devices to demonstrate the memristive properties of two terminal devices. As a possible application we showed that K-MnO$_2$ memristors display synapse-like behavior such as short and long-term potentiation and depression as well as ionic coupling effects.
△ Less
Submitted 18 February, 2021;
originally announced February 2021.
-
Thermal Conductivity Measurements in Nanosheets via Bolometric Effect
Authors:
Onur Çakıroğlu,
Naveed Mehmood,
Mert Miraç Çiçek,
Aizimaiti Aikebaier,
Hamid Reza Rasouli,
Engin Durgun,
T. Serkan Kasırga
Abstract:
Thermal conductivity measurement techniques for materials with nanoscale dimensions require fabrication of very complicated devices or their applicability is limited to a class of materials. Discovery of new methods with high thermal sensitivity are required for the widespread use of thermal conductivity measurements in characterizing materials properties. We propose and demonstrate a simple non-d…
▽ More
Thermal conductivity measurement techniques for materials with nanoscale dimensions require fabrication of very complicated devices or their applicability is limited to a class of materials. Discovery of new methods with high thermal sensitivity are required for the widespread use of thermal conductivity measurements in characterizing materials properties. We propose and demonstrate a simple non-destructive method with superior thermal sensitivity to measure the in-plane thermal conductivity of nanosheets and nanowires using the bolometric effect. The method utilizes laser beam heating to create a temperature gradient, as small as a fraction of a Kelvin, over the suspended section of the nanomaterial with electrical contacts. Local temperature rise due to the laser irradiation alters the electrical resistance of the device, which can be measured precisely. This resistance change is then used to extract the temperature profile along the nanomaterial using thermal conductivity as a fitting parameter. We measured the thermal conductivity of V2O3 nanosheets to validate the applicability of the method and found an excellent agreement with the literature. Further, we measured the thermal conductivity of metallic 2H-TaS2 for the first time and performed ab initio calculations to support our measurements. Finally, we discussed the applicability of the method on semiconducting nanosheets and performed measurements on WS2 and MoS2 thin flakes.
△ Less
Submitted 2 January, 2020;
originally announced January 2020.
-
Photocurrent Generation in a Metallic Transition Metal Dichalcogenide
Authors:
Naveed Mehmood,
Hamid Reza Rasouli,
Onur Çakıroğlu,
T. Serkan Kasırga
Abstract:
Light induced current in two-dimensional (2D) layered materials emerges from mechanisms such as photothermoelectric effect, photovoltaic effect or nonlocal hot carrier transport. Semiconducting layered transition metal dichalcogenides have been studied extensively in recent years as the generation of current by light is a crucial process in optoelectronic and photovoltaic devices. However, photocu…
▽ More
Light induced current in two-dimensional (2D) layered materials emerges from mechanisms such as photothermoelectric effect, photovoltaic effect or nonlocal hot carrier transport. Semiconducting layered transition metal dichalcogenides have been studied extensively in recent years as the generation of current by light is a crucial process in optoelectronic and photovoltaic devices. However, photocurrent generation is unexpected in metallic 2D layered materials unless a photothermal mechanism is prevalent. Typically, high thermal conductivity and low absorption of the visible spectrum prevent photothermal current generation in metals. Here, we report photoresponse from two-terminal devices of mechanically exfoliated metallic 3R-NbS$_2$ thin crystals using scanning photocurrent microscopy (SPCM) both at zero and finite bias. SPCM measurements reveal that the photocurrent predominantly emerges from metal/NbS$_2$ junctions of the two-terminal device at zero bias. At finite biases, along with the photocurrent generated at metal/NbS$_2$ junctions, now a negative photoresponse from all over the NbS$_2$ crystal is evident. Among our results, we realized that the observed photocurrent can be explained by the local heating caused by the laser excitation. These findings show that NbS$_2$ is among a few metallic materials in which photocurrent generation is possible.
△ Less
Submitted 8 January, 2018; v1 submitted 20 December, 2017;
originally announced December 2017.