-
Liquid droplet morphology on the fiber of a fog harvester mesh and the droplet detachment conditions under gravity
Authors:
Arani Mukhopadhyay,
Partha Sarathi Dutta,
Amitava Datta,
Ranjan Ganguly
Abstract:
Liquid droplets on fiber are often observed both in nature and in different engineering applications, like a fog harvesting mesh. Knowledge about drop-on-fiber morphology and its shedding under the influence of gravity can allow for the design of better separation technology. Mutual interaction of surface tension forces arising out of the surface energies of the liquid and the fiber solid, and the…
▽ More
Liquid droplets on fiber are often observed both in nature and in different engineering applications, like a fog harvesting mesh. Knowledge about drop-on-fiber morphology and its shedding under the influence of gravity can allow for the design of better separation technology. Mutual interaction of surface tension forces arising out of the surface energies of the liquid and the fiber solid, and the weight of the liquid droplet gives rise to different morphologies of the droplet, which may occur in a stable or meta-stable configuration. Predicting the droplet shape on a fiber of specified dimension and surface wettability accurately for a given volume of liquid is challenging since the curvature of both the droplet and the cylinder influence the phenomenon. We have numerically investigated the droplet shape and transition criterion for various volumes at different contact angles under the effect of varying Bond numbers using an open-source surface evolver code. It is observed that depending upon the relative dimensions of the liquid droplet, the fiber diameter, wettability, and gravity, the liquid exists on the fiber either in 'barrel' or in 'clamshell' shape. A relation between shedding volume and the Bond number is deduced, and the detachment volumes are calculated.
△ Less
Submitted 15 August, 2024;
originally announced August 2024.
-
Using graph neural networks to reconstruct charged pion showers in the CMS High Granularity Calorimeter
Authors:
M. Aamir,
B. Acar,
G. Adamov,
T. Adams,
C. Adloff,
S. Afanasiev,
C. Agrawal,
C. Agrawal,
A. Ahmad,
H. A. Ahmed,
S. Akbar,
N. Akchurin,
B. Akgul,
B. Akgun,
R. O. Akpinar,
E. Aktas,
A. AlKadhim,
V. Alexakhin,
J. Alimena,
J. Alison,
A. Alpana,
W. Alshehri,
P. Alvarez Dominguez,
M. Alyari,
C. Amendola
, et al. (550 additional authors not shown)
Abstract:
A novel method to reconstruct the energy of hadronic showers in the CMS High Granularity Calorimeter (HGCAL) is presented. The HGCAL is a sampling calorimeter with very fine transverse and longitudinal granularity. The active media are silicon sensors and scintillator tiles readout by SiPMs and the absorbers are a combination of lead and Cu/CuW in the electromagnetic section, and steel in the hadr…
▽ More
A novel method to reconstruct the energy of hadronic showers in the CMS High Granularity Calorimeter (HGCAL) is presented. The HGCAL is a sampling calorimeter with very fine transverse and longitudinal granularity. The active media are silicon sensors and scintillator tiles readout by SiPMs and the absorbers are a combination of lead and Cu/CuW in the electromagnetic section, and steel in the hadronic section. The shower reconstruction method is based on graph neural networks and it makes use of a dynamic reduction network architecture. It is shown that the algorithm is able to capture and mitigate the main effects that normally hinder the reconstruction of hadronic showers using classical reconstruction methods, by compensating for fluctuations in the multiplicity, energy, and spatial distributions of the shower's constituents. The performance of the algorithm is evaluated using test beam data collected in 2018 prototype of the CMS HGCAL accompanied by a section of the CALICE AHCAL prototype. The capability of the method to mitigate the impact of energy leakage from the calorimeter is also demonstrated.
△ Less
Submitted 30 June, 2024; v1 submitted 17 June, 2024;
originally announced June 2024.
-
Navigating the nexus: a perspective of centrosome -cytoskeleton interactions
Authors:
Subarna Dutta,
Arnab Barua
Abstract:
A structural relationship between the centrosome and cytoskeleton has been recognized for many years. Centrosomes typically reside near the nucleus, establishing and maintaining the nucleus-centrosome axis. This spatial arrangement is critical for determining cell polarity during interphase and ensuring the proper assembly of the spindle apparatus during mitosis. Centrosomes also engage in physica…
▽ More
A structural relationship between the centrosome and cytoskeleton has been recognized for many years. Centrosomes typically reside near the nucleus, establishing and maintaining the nucleus-centrosome axis. This spatial arrangement is critical for determining cell polarity during interphase and ensuring the proper assembly of the spindle apparatus during mitosis. Centrosomes also engage in physical interactions with various components of the cytoskeleton, balancing internal cellular architecture and polarity in a manner specific to tissue type and developmental stage. Numerous crosslinking proteins facilitate these interactions, promoting both cytoskeletal and centrosomal nucleation. This article provides an overview of how cytoskeletal elements and centrosomes coordinate their actions to regulate complex cellular functions such as cell migration, adhesion, and division. The reciprocal influence between cytoskeletal dynamics and centrosomal positioning underscores their integral roles in cellular organization and function.
△ Less
Submitted 4 July, 2024; v1 submitted 10 June, 2024;
originally announced June 2024.
-
Transition to synchronization in adaptive Sakaguchi-Kuramoto model with higher-order interactions
Authors:
Sangita Dutta,
Prosenjit Kundu,
Pitambar Khanra,
Chittaranjan Hens,
Pinaki Pal
Abstract:
We investigate the phenomenon of transition to synchronization in Sakaguchi-Kuramoto model in the presence of higher-order interactions and global order parameter adaptation. The investigation is done by performing extensive numerical simulations and low dimensional modeling of the system. Numerical simulations of the full system show both continuous (second order) as well as discontinuous transit…
▽ More
We investigate the phenomenon of transition to synchronization in Sakaguchi-Kuramoto model in the presence of higher-order interactions and global order parameter adaptation. The investigation is done by performing extensive numerical simulations and low dimensional modeling of the system. Numerical simulations of the full system show both continuous (second order) as well as discontinuous transitions. The discontinuous transitions can either be associated with explosive (first order) or with tiered synchronization states depending on the choice of parameters. To develop an in depth understanding of the transition scenario in the parameter space we derive a reduced order model (ROM) using the Ott-Antonsen ansatz, the results of which closely matches with that of the numerical simulations of the full system. The simplicity and analytical accessibility of the ROM helps to conveniently unfold the transition scenario in the system having complex dependence on the parameters. Simultaneous analysis of the full system and the ROM clearly identifies the regions of the parameter space exhibiting different types of transitions. It is observed that the second order continuous transition is connected with a supercritical pitchfork bifurcation (PB) of the ROM. On the other hand, the discontinuous teired transition is associated with multiple saddle-node (SN) bifurcations along with a supercritical PB and the first order explosive transition involves a subcritical PB alongside a SN bifurcation.
△ Less
Submitted 7 June, 2024;
originally announced June 2024.
-
Quantum inspired approach for denoising with application to medical imaging
Authors:
Amirreza Hashemi,
Sayantan Dutta,
Bertrand Georgeot,
Denis Kouame,
Hamid Sabet
Abstract:
Background noise in many fields such as medical imaging poses significant challenges for accurate diagnosis, prompting the development of denoising algorithms. Traditional methodologies, however, often struggle to address the complexities of noisy environments in high dimensional imaging systems. This paper introduces a novel quantum-inspired approach for image denoising, drawing upon principles o…
▽ More
Background noise in many fields such as medical imaging poses significant challenges for accurate diagnosis, prompting the development of denoising algorithms. Traditional methodologies, however, often struggle to address the complexities of noisy environments in high dimensional imaging systems. This paper introduces a novel quantum-inspired approach for image denoising, drawing upon principles of quantum and condensed matter physics. Our approach views medical images as amorphous structures akin to those found in condensed matter physics and we propose an algorithm that incorporates the concept of mode resolved localization directly into the denoising process. Notably, our approach eliminates the need for hyperparameter tuning. The proposed method is a standalone algorithm with minimal manual intervention, demonstrating its potential to use quantum-based techniques in classical signal denoising. Through numerical validation, we showcase the effectiveness of our approach in addressing noise-related challenges in imaging and especially medical imaging, underscoring its relevance for possible quantum computing applications.
△ Less
Submitted 17 June, 2024; v1 submitted 22 April, 2024;
originally announced May 2024.
-
Neutron and $\boldsymbolγ$-ray Discrimination by a Pressurized Helium-4 Based Scintillation Detector
Authors:
Shubham Dutta,
Sayan Ghosh,
Satyajit Saha
Abstract:
Pressurized Helium-4 (PHe) based fast neutron scintillation detector offers an useful alternative to organic liquid-based scintillator due to its relatively low response to the $γ$-rays compared to the latter type of scintillator. In the present work, we have investigated the capabilities of a PHe detector for the detection of fast neutrons in a mixed radiation field where both the neutrons and th…
▽ More
Pressurized Helium-4 (PHe) based fast neutron scintillation detector offers an useful alternative to organic liquid-based scintillator due to its relatively low response to the $γ$-rays compared to the latter type of scintillator. In the present work, we have investigated the capabilities of a PHe detector for the detection of fast neutrons in a mixed radiation field where both the neutrons and the $γ$-rays are present. Discrimination between neutrons and $γ$-rays is achieved by using fast-slow charge integration method. We have also conducted systematic studies of the attenuation of fast neutrons and $γ$-rays by high-density polyethylene (HDPE). Additionally, the simulation analyses, conducted using GEANT4, provide detailed insights into the interactions of the radiation quanta with the PHe detector.
△ Less
Submitted 2 September, 2024; v1 submitted 15 May, 2024;
originally announced May 2024.
-
Sheet model description of spatio-temporal evolution of upper-hybrid oscillations in an inhomogeneous magnetic field
Authors:
Nidhi Rathee,
Someswar Dutta,
R. Srinivasan,
Sudip Sengupta
Abstract:
Spatio-temporal evolution of large amplitude upper hybrid oscillations in a cold homogeneous plasma in the presence of an inhomogeneous magnetic field is studied analytically and numerically using the Dawson sheet model. It is observed that the inhomogeneity in magnetic field which causes the upper hybrid frequency to acquire a spatial dependence, results in phase mixing and subsequent breaking of…
▽ More
Spatio-temporal evolution of large amplitude upper hybrid oscillations in a cold homogeneous plasma in the presence of an inhomogeneous magnetic field is studied analytically and numerically using the Dawson sheet model. It is observed that the inhomogeneity in magnetic field which causes the upper hybrid frequency to acquire a spatial dependence, results in phase mixing and subsequent breaking of the upper hybrid oscillations at arbitrarily low amplitudes. This result is in sharp contrast to the usual upper hybrid oscillations in a homogeneous magnetic field where the oscillations break within a fraction of a period when the amplitude exceeds a certain critical value. Our perturbative calculations show that the phase mixing (wave breaking) time scales inversely with the amplitude of magnetic field inhomogeneity ($Δ$) and amplitude of imposed density perturbation ($δ$), and scales directly with the ratio of magnetic field inhomogeneity scale length to imposed density perturbation scale length ($(α/k_L)^{-1}$ ) as $ω_{pe}τ_{mix} \sim \left( 1+β^2 \right) ^{3/2}k_L/(β^2δΔα)$, where $β$ is the ratio of electron cyclotron frequency to electron plasma frequency. Further phase mixing time measured in simulations, performed using a 1-1/2 D code based on Dawson sheet model, shows good agreement with the above mentioned scaling. This result may be of relevance to plasma based particle acceleration experiments in the presence of a transverse inhomogeneous magnetic field.
△ Less
Submitted 9 May, 2024;
originally announced May 2024.
-
A versatile apparatus for simultaneous trapping of multiple species of ultracold atoms and ions to enable studies of low energy collisions and cold chemistry
Authors:
Bubai Rahaman,
Satyabrata Baidya,
Sourav Dutta
Abstract:
We describe an apparatus where many species of ultracold atoms can be simultaneously trapped and overlapped with many species of ions in a Paul trap. Several design innovations are made to increase the versatility of the apparatus while keeping the size and cost reasonable. We demonstrate the operation of a 3-dimensional (3D) magneto-optical trap (MOT) of $^7$Li using a single external cavity diod…
▽ More
We describe an apparatus where many species of ultracold atoms can be simultaneously trapped and overlapped with many species of ions in a Paul trap. Several design innovations are made to increase the versatility of the apparatus while keeping the size and cost reasonable. We demonstrate the operation of a 3-dimensional (3D) magneto-optical trap (MOT) of $^7$Li using a single external cavity diode laser. The $^7$Li MOT is loaded from an atomic beam, with atoms slowed using a Zeeman slower designed to work simultaneously for Li and Sr. The operation of a 3D MOT of $^{133}$Cs, loaded from a 2D MOT, is demonstrated and provisions for MOTs of Rb and K in the same vacuum manifold exist. We demonstrate the trapping of $^7$Li$^+$ and $^{133}$Cs$^+$ at different settings of the Paul trap and their detection using an integrated time-of-flight mass spectrometer. We present results on low energy neutral-neutral collisions ($^{133}$Cs-$^{133}$Cs, $^7$Li-$^7$Li and $^{133}$Cs-$^7$Li collisions) and charge-neutral collisions ($^{133}$Cs$^+$-$^{133}$Cs and $^7$Li$^+$-$^7$Li collisions). We show evidence of sympathetic cooling of $^7$Li$^+$ ($^{133}$Cs$^+$) due to collisions with the ultracold $^7$Li ($^{133}$Cs).
△ Less
Submitted 20 January, 2024;
originally announced January 2024.
-
Cavity-enhanced narrowband spectral filters using rare-earth ions doped in thin-film lithium niobate
Authors:
Yuqi Zhao,
Dylan Renaud,
Demitry Farfurnik,
Yuxi Jiang,
Subhojit Dutta,
Neil Sinclair,
Marko Loncar,
Edo Waks
Abstract:
On-chip optical filters are fundamental components in optical signal processing. While rare-earth ion-doped crystals offer ultra-narrow optical filtering via spectral hole burning, their applications have primarily been limited to those using bulk crystals, restricting their utility. In this work, we demonstrate cavity-enhanced spectral filtering based on rare-earth ions in an integrated nonlinear…
▽ More
On-chip optical filters are fundamental components in optical signal processing. While rare-earth ion-doped crystals offer ultra-narrow optical filtering via spectral hole burning, their applications have primarily been limited to those using bulk crystals, restricting their utility. In this work, we demonstrate cavity-enhanced spectral filtering based on rare-earth ions in an integrated nonlinear optical platform. We incorporate rare-earth ions into high quality-factor ring resonators patterned in thin-film lithium niobate. By spectral hole burning at 4K in a critically coupled resonance mode, we achieve bandpass filters ranging from 7 MHz linewidth, with 13.0 dB of extinction, to 24 MHz linewidth, with 20.4 dB of extinction. By reducing the temperature to 100 mK to eliminate phonon broadening, we achieve an even narrower linewidth of 681 kHz, which is comparable to the narrowest filter linewidth demonstrated in an integrated photonic device, while only requiring a small device footprint. Moreover, the cavity enables reconfigurable filtering by varying the cavity coupling rate. For instance, as opposed to the bandpass filter, we demonstrate a bandstop filter utilizing an under-coupled ring resonator. Such versatile integrated spectral filters with high extinction ratio and narrow linewidth could serve as fundamental components for optical signal processing and optical memories on-a-chip.
△ Less
Submitted 30 May, 2024; v1 submitted 17 January, 2024;
originally announced January 2024.
-
Tuning dissipation dilution in 2D material resonators by MEMS-induced tension
Authors:
M. P. F. Wopereis,
N. Bouman,
S. Dutta,
P. G. Steeneken,
F. Alijani,
G. J. Verbiest
Abstract:
Resonators based on two-dimensional (2D) materials have exceptional properties for application as nanomechanical sensors, which allows them to operate at high frequencies with high sensitivity. However, their performance as nanomechanical sensors is currently limited by their low quality ($Q$)-factor. Here, we make use of micro-electromechanical systems (MEMS) to apply pure in-plane mechanical str…
▽ More
Resonators based on two-dimensional (2D) materials have exceptional properties for application as nanomechanical sensors, which allows them to operate at high frequencies with high sensitivity. However, their performance as nanomechanical sensors is currently limited by their low quality ($Q$)-factor. Here, we make use of micro-electromechanical systems (MEMS) to apply pure in-plane mechanical strain, enhancing both their resonance frequency and Q-factor. In contrast to earlier work, the 2D material resonators are fabricated on the MEMS actuators without any wet processing steps, using a dry-transfer method. A platinum clamp, that is deposited by electron beam-induced deposition, is shown to be effective in fixing the 2D membrane to the MEMS and preventing slippage. By in-plane straining the membranes in a purely mechanical fashion, we increase the tensile energy, thereby diluting dissipation. This way, we show how dissipation dilution can increase the $Q$-factor of 2D material resonators by 91\%. The presented MEMS actuated dissipation dilution method does not only pave the way towards higher $Q$-factors in resonators based on 2D materials, but also provides a route toward studies of the intrinsic loss mechanisms of 2D materials in the monolayer limit.
△ Less
Submitted 1 March, 2024; v1 submitted 13 January, 2024;
originally announced January 2024.
-
Droplet morphology-based wettability tuning and design of fog harvesting mesh to minimize mesh-clogging
Authors:
Arani Mukhopadhyay,
Arkadeep Datta,
Partha Sarathi Dutta,
Amitava Datta,
Ranjan Ganguly
Abstract:
Fog harvesting relies on intercepting atmospheric or industrial fog by placing a porous obstacle, e.g., a mesh and collecting the deposited water. In the face of global water scarcity, such fog harvesting has emerged as a viable alternative source of potable water. Typical fog harvesting meshes suffer from poor collection efficiency due to aerodynamic bypassing of the oncoming fog stream and poor…
▽ More
Fog harvesting relies on intercepting atmospheric or industrial fog by placing a porous obstacle, e.g., a mesh and collecting the deposited water. In the face of global water scarcity, such fog harvesting has emerged as a viable alternative source of potable water. Typical fog harvesting meshes suffer from poor collection efficiency due to aerodynamic bypassing of the oncoming fog stream and poor collection of the deposited water from the mesh. One pestering challenge in this context is the frequent clogging up of mesh pores by the deposited fog water, which not only yields low drainage efficiency but also generates high aerodynamic resistance to the oncoming fog stream, thereby negatively impacting the fog collection efficiency. Minimizing the clogging is possible by rendering the mesh fiber superhydrophobic, but that entails other detrimental effects like premature dripping and flow-induced re-entrainment of water droplets into the fog stream from the mesh fiber. Herein, we improvise on the traditional interweaved metal mesh designs by defining critical parameters, viz., mesh pitch, shade coefficient, and fiber wettability, and deduce their optimal values from numerically and experimentally observed morphology of collected fog-water droplets under various operating scenarios. We extend our investigations over a varying range of mesh-wettability, including superhydrophilic and hydrophobic fibers, and go on to find optimal shade coefficients which would theoretically render clog-proof fog harvesting meshes. The aerodynamic, deposition, and overall collection efficiencies are characterized. Hydrophobic meshes with square pores, having fiber diameters smaller than the capillary length scale of water, and an optimal shade coefficient, are found to be the most effective design of such clog-proof meshes.
△ Less
Submitted 3 April, 2024; v1 submitted 10 January, 2024;
originally announced January 2024.
-
Rate-Induced Transitions in Networked Complex Adaptive Systems: Exploring Dynamics and Management Implications Across Ecological, Social, and Socioecological Systems
Authors:
Vítor V. Vasconcelos,
Flávia M. D. Marquitti,
Theresa Ong,
Lisa C. McManus,
Marcus Aguiar,
Amanda B. Campos,
Partha S. Dutta,
Kristen Jovanelly,
Victoria Junquera,
Jude Kong,
Elisabeth H. Krueger,
Simon A. Levin,
Wenying Liao,
Mingzhen Lu,
Dhruv Mittal,
Mercedes Pascual,
Flávio L. Pinheiro,
Juan Rocha,
Fernando P. Santos,
Peter Sloot,
Chenyang,
Su,
Benton Taylor,
Eden Tekwa,
Sjoerd Terpstra
, et al. (5 additional authors not shown)
Abstract:
Complex adaptive systems (CASs), from ecosystems to economies, are open systems and inherently dependent on external conditions. While a system can transition from one state to another based on the magnitude of change in external conditions, the rate of change -- irrespective of magnitude -- may also lead to system state changes due to a phenomenon known as a rate-induced transition (RIT). This st…
▽ More
Complex adaptive systems (CASs), from ecosystems to economies, are open systems and inherently dependent on external conditions. While a system can transition from one state to another based on the magnitude of change in external conditions, the rate of change -- irrespective of magnitude -- may also lead to system state changes due to a phenomenon known as a rate-induced transition (RIT). This study presents a novel framework that captures RITs in CASs through a local model and a network extension where each node contributes to the structural adaptability of others. Our findings reveal how RITs occur at a critical environmental change rate, with lower-degree nodes tipping first due to fewer connections and reduced adaptive capacity. High-degree nodes tip later as their adaptability sources (lower-degree nodes) collapse. This pattern persists across various network structures. Our study calls for an extended perspective when managing CASs, emphasizing the need to focus not only on thresholds of external conditions but also the rate at which those conditions change, particularly in the context of the collapse of surrounding systems that contribute to the focal system's resilience. Our analytical method opens a path to designing management policies that mitigate RIT impacts and enhance resilience in ecological, social, and socioecological systems. These policies could include controlling environmental change rates, fostering system adaptability, implementing adaptive management strategies, and building capacity and knowledge exchange. Our study contributes to the understanding of RIT dynamics and informs effective management strategies for complex adaptive systems in the face of rapid environmental change.
△ Less
Submitted 14 September, 2023;
originally announced September 2023.
-
arXiv:2308.12386
[pdf]
physics.atom-ph
cond-mat.quant-gas
physics.app-ph
physics.chem-ph
physics.optics
Observation of quantum interference of optical transition pathways in Doppler-free two-photon spectroscopy and implications for precision measurements
Authors:
Bubai Rahaman,
Sid C. Wright,
Sourav Dutta
Abstract:
Doppler-free two-photon spectroscopy is a standard technique for precision measurement of transition frequencies of dipole-forbidden transitions. The accuracy of such measurements depends critically on fitting of the spectrum to an appropriate line shape model, often a Voigt profile which neglects the effect of quantum interference of optical transitions. Here, we report the observation of quantum…
▽ More
Doppler-free two-photon spectroscopy is a standard technique for precision measurement of transition frequencies of dipole-forbidden transitions. The accuracy of such measurements depends critically on fitting of the spectrum to an appropriate line shape model, often a Voigt profile which neglects the effect of quantum interference of optical transitions. Here, we report the observation of quantum interference of optical transition pathways in Doppler-free two-photon spectroscopy of the cesium 6S-7D transitions. The quantum interference manifests itself as asymmetric line shapes of the hyperfine lines of the 7D states, observed through spontaneous emission following excitation by a narrow-linewidth cw laser. The interference persists despite the lines being spectrally well-resolved. Ignoring the effect of quantum interference causes large systematic shifts in the determination of the line-centers, while accounting for it resolves the apparent line shift and enables the precise determination of hyperfine splitting in the 7D states. We calculate the spectral line shape including the effect of quantum interference and show that it agrees with the experimental observations. Our results have implications for precision measurements of hyperfine splittings, isotope shifts and transition frequencies, including those of the hydrogen S-S and S-D transitions.
△ Less
Submitted 23 August, 2023;
originally announced August 2023.
-
Doppler-Enhanced Quantum Magnetometry with thermal Rydberg atoms
Authors:
Shovan Kanti Barik,
Silpa B S,
M Venkat Ramana,
Shovan Dutta,
Sanjukta Roy
Abstract:
We report experimental measurements showing how one can combine quantum interference and thermal Doppler shifts at room temperature to detect weak magnetic fields. We pump ${}^{87}$Rb atoms to a highly-excited, Rydberg level using a probe and a coupling laser, leading to narrow transmission peaks of the probe due to destructive interference of transition amplitudes, known as Electromagnetically In…
▽ More
We report experimental measurements showing how one can combine quantum interference and thermal Doppler shifts at room temperature to detect weak magnetic fields. We pump ${}^{87}$Rb atoms to a highly-excited, Rydberg level using a probe and a coupling laser, leading to narrow transmission peaks of the probe due to destructive interference of transition amplitudes, known as Electromagnetically Induced Transparency (EIT). While it is customary in such setups to use counterpropagating lasers to minimize the effect of Doppler shifts, here we show, on the contrary, that one can harness Doppler shifts in a copropagating arrangement to produce an enhanced response to a magnetic field. In particular, we demonstrate an order-of-magnitude bigger splitting in the transmission spectrum as compared to the counterpropagating case. We explain and generalize our findings with theoretical modelling and simulations based on a Lindblad master equation. Our results pave the way to using quantum effects for magnetometry in readily deployable room-temperature platforms.
△ Less
Submitted 9 August, 2023;
originally announced August 2023.
-
Giant conductance of PSS:PEDOT micro-surfaces induced by microbubble lithography
Authors:
Anand Dev Ranjan,
Rakesh Sen,
Sumeet Kumar,
Rahul Vaippully,
Soumya Dutta,
Soumyajit Roy,
Basudev Roy,
Ayan Banerjee
Abstract:
We provide direct evidence of the effects of interface engineering of various substrates by Microbubble lithography (MBL). We choose a model organic plastic (or polymer) poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS), with conductivity of 140 S/cm, as a representative organic system to showcase our technique. Thus, we fabricate permanent patterns of PEDOT:PSS on glass, followed…
▽ More
We provide direct evidence of the effects of interface engineering of various substrates by Microbubble lithography (MBL). We choose a model organic plastic (or polymer) poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS), with conductivity of 140 S/cm, as a representative organic system to showcase our technique. Thus, we fabricate permanent patterns of PEDOT:PSS on glass, followed by a flexible PDMS substrate, and observe conductivity enhancement of 5 times on the former (694 S/cm), and 20 times (2844 S/cm) on the latter, without the use of external doping agents or invasive chemical treatment. Probing the patterned interface, we observe that MBL is able to tune the conformational states of PEDOT:PSS from coils in the pristine form, to extended coils on glass, and almost linear structures in PDMS due to its more malleable liquid-like interface. This results in higher ordering and vanishing grain boundaries leading to the highest conductivity of PEDOT:PSS on PDMS substrates.
△ Less
Submitted 26 July, 2023;
originally announced July 2023.
-
Intermolecular Coulombic decay by concerted transfer of energy from photoreceptors to a reaction center
Authors:
Saroj Barik,
Nihar Ranjan Behera,
Saurav Dutta,
Y. Sajeev,
G. Aravind
Abstract:
Molecular mechanisms that enable concerted transfer of energy from several photoacceptors to a distinct reaction center are most desirable for the utilization of light-energy. Here we show that intermolecular Coulombic decay, a channel which enables non-local disposal of energy in photoexcited molecules, offers an avenue for such a novel energy-transfer mechanism. On irradiation of pyridine-argon…
▽ More
Molecular mechanisms that enable concerted transfer of energy from several photoacceptors to a distinct reaction center are most desirable for the utilization of light-energy. Here we show that intermolecular Coulombic decay, a channel which enables non-local disposal of energy in photoexcited molecules, offers an avenue for such a novel energy-transfer mechanism. On irradiation of pyridine-argon gas mixture at 266 nm and at low laser intensities, we observed a surprisingly dominant formation of argon cations. Our measurements on the laser-power dependence of the yield of the Ar cations reveal that intermolecular Coulombic interactions concertedly localize the excitation energy of several photoexcited pyridines at the argon reaction center and ionize it. The density of the reaction center offers an efficient handle to optimize this concerted energy-transfer. This mechanism paves the way for a new $π$-molecular light-harvesting system, and can also contribute to biomolecular stability against photodamage.
△ Less
Submitted 17 June, 2023;
originally announced June 2023.
-
Self-organized intracellular twisters
Authors:
Sayantan Dutta,
Reza Farhadifar,
Wen Lu,
Gokberk kabacaoglu,
Robert Blackwell,
David B Stein,
Margot Lakonishok,
Vladimir I. Gelfand,
Stanislav Y. Shvartsman,
Michael J. Shelley
Abstract:
Life in complex systems, such as cities and organisms, comes to a standstill when global coordination of mass, energy, and information flows is disrupted. Global coordination is no less important in single cells, especially in large oocytes and newly formed embryos, which commonly use fast fluid flows for dynamic reorganization of their cytoplasm. Here, we combine theory, computing, and imaging to…
▽ More
Life in complex systems, such as cities and organisms, comes to a standstill when global coordination of mass, energy, and information flows is disrupted. Global coordination is no less important in single cells, especially in large oocytes and newly formed embryos, which commonly use fast fluid flows for dynamic reorganization of their cytoplasm. Here, we combine theory, computing, and imaging to investigate such flows in the Drosophila oocyte, where streaming has been proposed to spontaneously arise from hydrodynamic interactions among cortically anchored microtubules loaded with cargo-carrying molecular motors. We use a fast, accurate, and scalable numerical approach to investigate fluid-structure interactions of 1000s of flexible fibers and demonstrate the robust emergence and evolution of cell-spanning vortices, or twisters. Dominated by a rigid body rotation and secondary toroidal components, these flows are likely involved in rapid mixing and transport of ooplasmic components.
△ Less
Submitted 5 April, 2023; v1 submitted 4 April, 2023;
originally announced April 2023.
-
Comprehensive study of forced convection over a heated elliptical cylinder with varying angle of incidences to uniform free stream
Authors:
Raghav Singhal,
Sailen Dutta,
Jiten C. Kalita
Abstract:
In this paper we carry out a numerical investigation of forced convection heat transfer from a heated elliptical cylinder in a uniform free stream with angle of inclination $θ^{\circ}$. Numerical simulations were carried out for $10 \leq Re \leq 120$, $0^{\circ} \leq θ\leq 180^{\circ}$, and $Pr = 0.71$. Results are reported for both steady and unsteady state regime in terms of streamlines, vortici…
▽ More
In this paper we carry out a numerical investigation of forced convection heat transfer from a heated elliptical cylinder in a uniform free stream with angle of inclination $θ^{\circ}$. Numerical simulations were carried out for $10 \leq Re \leq 120$, $0^{\circ} \leq θ\leq 180^{\circ}$, and $Pr = 0.71$. Results are reported for both steady and unsteady state regime in terms of streamlines, vorticity contours, isotherms, drag and lift coefficients, Strouhal number, and Nusselt number. In the process, we also propose a novel method of computing the Nusselt number by merely gathering flow information along the normal to the ellipse boundary. The critical $Re$ at which which flow becomes unsteady, $Re_c$ is reported for all the values of $θ$ considered and found to be the same for $θ$ and $180^\circ -θ$ for $0^\circ \leq θ\leq 90^\circ$. In the steady regime, the $Re$ at which flow separation occurs progressively decreases as $θ$ increases. The surface averaged Nusselt number ($Nu_{\text{av}}$) increases with $Re$, whereas the drag force experienced by the cylinder decreases with $Re$. The transient regime is characterized by periodic vortex shedding, which is quantified by the Strouhal number ($St$). Vortex shedding frequency increases with $Re$ and decreases with $θ$ for a given $Re$. $Nu_{\text{av}}$ also exhibits a time-varying oscillatory behaviour with a time period which is half the time period of vortex shedding. The amplitude of oscillation of $Nu_{\text{av}}$ increases with $θ$.
△ Less
Submitted 30 March, 2023;
originally announced March 2023.
-
Perfect synchronization in complex networks with higher order interactions
Authors:
Sangita Dutta,
Prosenjit Kundu,
Pitambar Khanra,
Chittaranjan Hens,
Pinaki Pal
Abstract:
We propose a framework for achieving perfect synchronization in complex networks of Sakaguchi-Kuramoto oscillators in presence of higher order interactions (simplicial complexes) at a targeted point in the parameter space. It is achieved by using an analytically derived frequency set from the governing equations. The frequency set not only provides stable perfect synchronization in the network at…
▽ More
We propose a framework for achieving perfect synchronization in complex networks of Sakaguchi-Kuramoto oscillators in presence of higher order interactions (simplicial complexes) at a targeted point in the parameter space. It is achieved by using an analytically derived frequency set from the governing equations. The frequency set not only provides stable perfect synchronization in the network at a desired point, but also proves to be very effective in achieving high level of synchronization around it compared to the choice of any other frequency sets (Uniform, Normal etc.). The proposed framework has been verified using scale-free, random and small world networks. In all the cases, stable perfect synchronization is achieved at a targeted point for wide ranges of the coupling parameters and phase-frustration. Both first and second order transitions to synchronizations are observed in the system depending on the type of the network and phase frustration. The stability of perfect synchronization state is checked using the low dimensional reduction approach. The robustness of the perfect synchronization state obtained in the system using the derived frequency set is checked by introducing a Gaussian noise around it.
△ Less
Submitted 16 March, 2023;
originally announced March 2023.
-
arXiv:2303.01171
[pdf]
physics.optics
cond-mat.quant-gas
physics.app-ph
physics.atom-ph
physics.chem-ph
A stable 671 nm external cavity diode laser with output power exceeding 150 mW suitable for laser cooling of lithium atoms
Authors:
Sourav Dutta,
Bubai Rahaman
Abstract:
We report the design and performance of a Littrow-type 671 nm External Cavity Diode Laser (ECDL) that delivers output power greater than 150 mW and features enhanced passive stability. The main body of the ECDL is constructed using titanium to minimize temperature related frequency drifts. The laser diode is mounted in a cylindrical mount that allows vertical adjustments while maintaining thermal…
▽ More
We report the design and performance of a Littrow-type 671 nm External Cavity Diode Laser (ECDL) that delivers output power greater than 150 mW and features enhanced passive stability. The main body of the ECDL is constructed using titanium to minimize temperature related frequency drifts. The laser diode is mounted in a cylindrical mount that allows vertical adjustments while maintaining thermal contact with the temperature stabilized base plate. The wavelength tuning is achieved by horizontal displacement of the diffraction grating about an optimal pivot point. The compact design increases the robustness and passive stability of the ECDL and the stiff but light-weight diffraction grating-arm reduces the susceptibility to low-frequency mechanical vibrations. The linewidth of the ECDL is ~360 kHz. We use the 671 nm ECDL, without any additional power amplification, for laser cooling and trapping of lithium atoms in a magneto-optical trap. This simple, low-cost ECDL design using off-the-shelf laser diodes without anti-reflection coating can also be adapted to other wavelengths.
△ Less
Submitted 2 March, 2023;
originally announced March 2023.
-
On the Threshold of Drop Fragmentation under Impulsive Acceleration
Authors:
Aditya Parik,
Jeffrey Fonnesbeck,
Tadd Truscott,
Som Dutta
Abstract:
We examine the complete landscape of parameters which affect secondary breakup of a Newtonian droplet under impulsive acceleration. A Buckingham-Pi analysis reveals that the critical Weber number $\mathit{We}_\mathit{cr}$ for a non-vibrational breakup depends on the density ratio $(ρ)$, the drop $(\mathit{Oh}_d)$ and the ambient $(\mathit{Oh}_o)$ Ohnesorge numbers. Volume of fluid (VOF) multiphase…
▽ More
We examine the complete landscape of parameters which affect secondary breakup of a Newtonian droplet under impulsive acceleration. A Buckingham-Pi analysis reveals that the critical Weber number $\mathit{We}_\mathit{cr}$ for a non-vibrational breakup depends on the density ratio $(ρ)$, the drop $(\mathit{Oh}_d)$ and the ambient $(\mathit{Oh}_o)$ Ohnesorge numbers. Volume of fluid (VOF) multiphase flow simulations are performed using Basilisk to conduct a reasonably complete parametric sweep of the non-dimensional parameters involved. It is found that, contrary to current consensus, even for $\mathit{Oh}_d \leq 0.1$, a decrease in $\mathit{Oh}_d$ has a substantial impact on the breakup morphology, motivating plume formation. In addition to $ρ$, $\mathit{Oh}_o$ also affects the balance between pressure differences between a droplet's pole and its periphery, and the shear stresses on its upstream surface, which ultimately dictates the flow inside the droplet. This behavior manifests in simulations through the observed pancake shapes and ultimately the breakup morphology (forward or backward bag). All these factors affecting droplet deformation process are specified and theories explaining the observed results are provided. A $\mathit{We}_\mathit{cr}-\mathit{Oh}_d$ plot is provided to summarize all variations in $\mathit{We}_\mathit{cr}$ observed due to changes in the involved non-dimensional parameters. All observed critical pancake and breakup morphologies are summarized using a phase diagram illustrating all deformation paths a droplet might take under impulsive acceleration. Finally, based on the understanding of process of bag breakup gained from this work, a non-dimensional parameter to predict droplet breakup threshold is derived and tested on all simulation data obtained from this work and all experimental data gathered from existing literature.
△ Less
Submitted 22 November, 2022;
originally announced November 2022.
-
Performance of the CMS High Granularity Calorimeter prototype to charged pion beams of 20$-$300 GeV/c
Authors:
B. Acar,
G. Adamov,
C. Adloff,
S. Afanasiev,
N. Akchurin,
B. Akgün,
M. Alhusseini,
J. Alison,
J. P. Figueiredo de sa Sousa de Almeida,
P. G. Dias de Almeida,
A. Alpana,
M. Alyari,
I. Andreev,
U. Aras,
P. Aspell,
I. O. Atakisi,
O. Bach,
A. Baden,
G. Bakas,
A. Bakshi,
S. Banerjee,
P. DeBarbaro,
P. Bargassa,
D. Barney,
F. Beaudette
, et al. (435 additional authors not shown)
Abstract:
The upgrade of the CMS experiment for the high luminosity operation of the LHC comprises the replacement of the current endcap calorimeter by a high granularity sampling calorimeter (HGCAL). The electromagnetic section of the HGCAL is based on silicon sensors interspersed between lead and copper (or copper tungsten) absorbers. The hadronic section uses layers of stainless steel as an absorbing med…
▽ More
The upgrade of the CMS experiment for the high luminosity operation of the LHC comprises the replacement of the current endcap calorimeter by a high granularity sampling calorimeter (HGCAL). The electromagnetic section of the HGCAL is based on silicon sensors interspersed between lead and copper (or copper tungsten) absorbers. The hadronic section uses layers of stainless steel as an absorbing medium and silicon sensors as an active medium in the regions of high radiation exposure, and scintillator tiles directly readout by silicon photomultipliers in the remaining regions. As part of the development of the detector and its readout electronic components, a section of a silicon-based HGCAL prototype detector along with a section of the CALICE AHCAL prototype was exposed to muons, electrons and charged pions in beam test experiments at the H2 beamline at the CERN SPS in October 2018. The AHCAL uses the same technology as foreseen for the HGCAL but with much finer longitudinal segmentation. The performance of the calorimeters in terms of energy response and resolution, longitudinal and transverse shower profiles is studied using negatively charged pions, and is compared to GEANT4 predictions. This is the first report summarizing results of hadronic showers measured by the HGCAL prototype using beam test data.
△ Less
Submitted 27 May, 2023; v1 submitted 9 November, 2022;
originally announced November 2022.
-
High precision measurement of the hyperfine splitting and ac Stark shift of the $7d$ $^{2}D_{3/2}$ state in atomic cesium
Authors:
Bubai Rahaman,
Sourav Dutta
Abstract:
We report the measurement of hyperfine splitting in the $7d$ $^{2}D_{3/2}$ state of $^{133}$Cs using high resolution Doppler-free two-photon spectroscopy in a Cs vapor cell. We determine the hyperfine coupling constants $A = 7.3509(9)$ MHz and $B = -0.041(8)$ MHz, which represent an order of magnitude improvement in the precision. We also obtain bounds on the magnitude of the nuclear magnetic octu…
▽ More
We report the measurement of hyperfine splitting in the $7d$ $^{2}D_{3/2}$ state of $^{133}$Cs using high resolution Doppler-free two-photon spectroscopy in a Cs vapor cell. We determine the hyperfine coupling constants $A = 7.3509(9)$ MHz and $B = -0.041(8)$ MHz, which represent an order of magnitude improvement in the precision. We also obtain bounds on the magnitude of the nuclear magnetic octupole coupling constant $C$. Additionally, we measure the ac Stark shift of the $6s$ $^{2}S_{1/2} \rightarrow 7d$ $^{2}D_{3/2}$ transition at 767.8 nm to be $-49 \pm 5$ Hz/(W/cm$^2$), in agreement with theoretical calculations. We further report the measurement of collisional shift [$-32.6 \pm 2.0$ kHz/mTorr] and pressure broadening for the individual hyperfine levels of the $6s$ $^{2}S_{1/2} \rightarrow 7d$ $^{2}D_{3/2}$ transition. These measurements provide valuable inputs for analysis of systematic effects in optical frequency standards based on the cesium $6s$ $^{2}S_{1/2} \rightarrow 7d$ $^{2}D_{3/2}$ two-photon transition
△ Less
Submitted 4 October, 2022;
originally announced October 2022.
-
Hyperfine coupling constants of the cesium $7D_{5/2}$ state measured up to the octupole term
Authors:
Bubai Rahaman,
Sourav Dutta
Abstract:
We report the measurement of the hyperfine splitting in the $7D_{5/2}$ state of $^{133}$Cs using high resolution Doppler-free two-photon spectroscopy enabled by precise frequency scans using an acousto-optic modulator. All the six hyperfine levels are resolved in our spectra. We determine the hyperfine coupling constants A = -1.70867(62) MHz and B = 0.050(14) MHz which represent over 20-times impr…
▽ More
We report the measurement of the hyperfine splitting in the $7D_{5/2}$ state of $^{133}$Cs using high resolution Doppler-free two-photon spectroscopy enabled by precise frequency scans using an acousto-optic modulator. All the six hyperfine levels are resolved in our spectra. We determine the hyperfine coupling constants A = -1.70867(62) MHz and B = 0.050(14) MHz which represent over 20-times improvement in the precision of both A and B. Moreover, our measurement is sufficiently precise to put bounds on the value of the magnetic octupole coupling constant C = 0.4(1.4) kHz for the $7D_{5/2}$ state. We additionally report the measurement of ac Stark shift [-46 $\pm$ 4 Hz/(W/cm$^2$)], collisional shift and pressure broadening which are important for optical frequency standards based on the $6S_{1/2} \rightarrow 7D_{5/2}$ two-photon transition.
△ Less
Submitted 26 September, 2022;
originally announced September 2022.
-
Design of a Strong-Arm Dynamic-Latch based comparator with high speed, low power and low offset for SAR-ADC
Authors:
Sounak Dutta
Abstract:
Comparators are utilised by Nyquist-rate and oversampling analog to digital converters (ADCs) to accomplish quantization and perhaps sampling. Thus, comparators have a substantial effect on the speed and accuracy of ADCs. This study provides a revised design for a dynamic-latch-based comparator that achieves the lowest latency, maximum area-efficient realisation, reduced power dissipation, and low…
▽ More
Comparators are utilised by Nyquist-rate and oversampling analog to digital converters (ADCs) to accomplish quantization and perhaps sampling. Thus, comparators have a substantial effect on the speed and accuracy of ADCs. This study provides a revised design for a dynamic-latch-based comparator that achieves the lowest latency, maximum area-efficient realisation, reduced power dissipation, and low offset. The proposed circuit has been designed and simulated using GDPK 45 nm standard CMOS-Process to operate on 100 MHz clock, at 1.2V supply voltage. Design and simulation have been carried out using CADENCE Virtuoso EDA tool. Compared to the original design, the PDP was easily reduced by approximately by 6% with offset voltage reduced by 8 mV without speed trade-off.
△ Less
Submitted 25 October, 2022; v1 submitted 9 September, 2022;
originally announced September 2022.
-
Nature of excitons in PPDT2FBT: PCBM solar cell: Role played by PCBM
Authors:
Subhamoy Sahoo,
Dhruvajyoti Barah,
Dinesh Kumar S,
Nithin Xavier,
Soumya Dutta,
Debdutta Ray,
Jayeeta Bhattacharyya
Abstract:
In organic semiconductor based bulk heterojunction solar cells, the presence of acceptor increases the formation of charge transfer (CT) excitons, thereby leading to higher exciton dissociation probabilities. In this work we used steady state EA measurements to probe the change in the nature of excitons as the blend composition of the solar cell active layer material is varied. We investigated ble…
▽ More
In organic semiconductor based bulk heterojunction solar cells, the presence of acceptor increases the formation of charge transfer (CT) excitons, thereby leading to higher exciton dissociation probabilities. In this work we used steady state EA measurements to probe the change in the nature of excitons as the blend composition of the solar cell active layer material is varied. We investigated blends of poly[(2,5-bis(2-hexyldecyloxy)phenylene)-alt-(5,6-difluoro-4,7-di(thiophen-2-yl)benzo[c]-[1,2,5]thiadiazole)] (PPDT2FBT) and (6,6)-Phenyl C71 butyric acid methyl ester (PCBM). Analysis of the EA spectra showed that in presence of fullerene based acceptor, like PCBM, CT characteristics of the excitons were modified, though, no new CT signature was observed in the blend. Enhancement in the CT characteristic in the blend was reflected in the photoluminescence (PL) measurements of the blends, where, PL quenching of $\sim$ 63\% was observed for 1\% PCBM. The quenching reaches saturation at about 20\% PCBM. However, the maximum efficiency of the devices was obtained for the blend having 50\% PCBM. Comparing experimental results with simulations, the variation of the device efficiency with PCBM percentage was shown to be arising from multiple factors like increase in polarizability and dipole moment of excitons, and the efficiency of the carrier collection from the bulk of the active layer.
△ Less
Submitted 11 July, 2022;
originally announced July 2022.
-
Pulse Shape Simulation and Discrimination using Machine-Learning Techniques
Authors:
Shubham Dutta,
Sayan Ghosh,
Satyaki Bhattacharya,
Satyajit Saha
Abstract:
An essential metric for the quality of a particle-identification experiment is its statistical power to discriminate between signal and background. Pulse shape discrimination (PSD) is a basic method for this purpose in many nuclear, high-energy and rare-event search experiments where scintillation detectors are used. Conventional techniques exploit the difference between decay-times of the pulses…
▽ More
An essential metric for the quality of a particle-identification experiment is its statistical power to discriminate between signal and background. Pulse shape discrimination (PSD) is a basic method for this purpose in many nuclear, high-energy and rare-event search experiments where scintillation detectors are used. Conventional techniques exploit the difference between decay-times of the pulses from signal and background events or pulse signals caused by different types of radiation quanta to achieve good discrimination. However, such techniques are efficient only when the total light-emission is sufficient to get a proper pulse profile. This is only possible when adequate amount of energy is deposited from recoil of the electrons or the nuclei of the scintillator materials caused by the incident particle on the detector. But, rare-event search experiments like direct search for dark matter do not always satisfy these conditions. Hence, it becomes imperative to have a method that can deliver a very efficient discrimination in these scenarios. Neural network based machine-learning algorithms have been used for classification problems in many areas of physics especially in high-energy experiments and have given better results compared to conventional techniques. We present the results of our investigations of two network based methods \viz Dense Neural Network and Recurrent Neural Network, for pulse shape discrimination and compare the same with conventional methods.
△ Less
Submitted 15 May, 2024; v1 submitted 30 June, 2022;
originally announced June 2022.
-
In Situ Data Summaries for Flexible Feature Analysis in Large-Scale Multiphase Flow Simulations
Authors:
Soumya Dutta,
Terece Turton,
David Rogers,
Jordan Musser,
James Ahrens,
Ann Almgren
Abstract:
The study of multiphase flow is essential for understanding the complex interactions of various materials. In particular, when designing chemical reactors such as fluidized bed reactors (FBR), a detailed understanding of the hydrodynamics is critical for optimizing reactor performance and stability. An FBR allows experts to conduct different types of chemical reactions involving multiphase materia…
▽ More
The study of multiphase flow is essential for understanding the complex interactions of various materials. In particular, when designing chemical reactors such as fluidized bed reactors (FBR), a detailed understanding of the hydrodynamics is critical for optimizing reactor performance and stability. An FBR allows experts to conduct different types of chemical reactions involving multiphase materials, especially interaction between gas and solids. During such complex chemical processes, formation of void regions in the reactor, generally termed as bubbles, is an important phenomenon. Study of these bubbles has a deep implication in predicting the reactor's overall efficiency. But physical experiments needed to understand bubble dynamics are costly and non-trivial. Therefore, to study such chemical processes and bubble dynamics, a state-of-the-art massively parallel computational fluid dynamics discrete element model (CFD-DEM), MFIX-Exa is being developed for simulating multiphase flows. Despite the proven accuracy of MFIX-Exa in modeling bubbling phenomena, the very-large size of the output data prohibits the use of traditional post hoc analysis capabilities in both storage and I/O time. To address these issues and allow the application scientists to explore the bubble dynamics in an efficient and timely manner, we have developed an end-to-end visual analytics pipeline that enables in situ detection of bubbles using statistical techniques, followed by a flexible and interactive visual exploration of bubble dynamics in the post hoc analysis phase. Positive feedback from the experts has indicated the efficacy of the proposed approach for exploring bubble dynamics in very-large scale multiphase flow simulations.
△ Less
Submitted 7 January, 2022;
originally announced January 2022.
-
MoS$_{2}$ nanosheets incorporated α-Fe$_{2}$O$_{3}$/ZnO nanocomposite with enhanced photocatalytic dye degradation and hydrogen production ability
Authors:
Angkita Mistry Tama,
Subrata Das,
Sagar Dutta,
M. D. I. Bhuyan,
M. N. Islam,
M. A. Basith
Abstract:
We have synthesized MoS$_{2}$ incorporated $α$-Fe$_{2}$O$_{3}$/ZnO nanocomposites by the hydrothermal process. The effect of incorporating ultrasonically exfoliated MoS$_{2}$ on the photocatalytic performance of $α$-Fe$_{2}$O$_{3}$/ZnO nanocomposites has been demonstrated. Structural, morphological and optical characteristics of the nanomaterials are investigated by performing Rietveld refinement…
▽ More
We have synthesized MoS$_{2}$ incorporated $α$-Fe$_{2}$O$_{3}$/ZnO nanocomposites by the hydrothermal process. The effect of incorporating ultrasonically exfoliated MoS$_{2}$ on the photocatalytic performance of $α$-Fe$_{2}$O$_{3}$/ZnO nanocomposites has been demonstrated. Structural, morphological and optical characteristics of the nanomaterials are investigated by performing Rietveld refinement of powder X-ray diffraction patterns, field emission scanning electron microscopy and UV-visible spectroscopy. The photoluminescence spectra of the nanocomposites show that the recombination of photogenerated electron-hole pairs is suppressed due to incorporating MoS$_{2}$ nanosheets. The ultrasonicated MoS$_{2}$ incorporated $α$-Fe$_{2}$O$_{3}$/ZnO nanocomposite shows 91% and 83% efficiency to degrade RhB dye and antibiotic ciprofloxacin under solar illumination. Active species trapping experiments reveal that the hydroxyl radicals play a significant role in RhB degradation. Likewise, the dye degradation efficiency, the amount of hydrogen produced by this nanocomposite via photocatalytic water splitting is also higher as compared to non-ultrasonicated MoS$_{2}$ incorporated $α$-Fe$_{2}$O$_{3}$/ZnO and $α$-Fe$_{2}$O$_{3}$/ZnO nanocomposites as well as Degussa P25 titania nanoparticles. This indicates the promising potential of the incorporation of ultrasonicated MoS$_{2}$ with $α$-Fe$_{2}$O$_{3}$/ZnO nanocomposite for generation of carbon-free hydrogen by water splitting. The substantial increase in the photocatalytic efficiency of $α$-Fe$_{2}$O$_{3}$/ZnO after incorporation of ultrasonicated MoS$_{2}$ can be attributed to its favorable band structure, large surface to volume ratio, effective segregation and migration of photogenerated electron-hole pairs at the interface of heterojunction and the active edge sites provided by few-layer MoS$_{2}$ nanosheets.
△ Less
Submitted 13 November, 2021;
originally announced November 2021.
-
Response of a CMS HGCAL silicon-pad electromagnetic calorimeter prototype to 20-300 GeV positrons
Authors:
B. Acar,
G. Adamov,
C. Adloff,
S. Afanasiev,
N. Akchurin,
B. Akgün,
F. Alam Khan,
M. Alhusseini,
J. Alison,
A. Alpana,
G. Altopp,
M. Alyari,
S. An,
S. Anagul,
I. Andreev,
P. Aspell,
I. O. Atakisi,
O. Bach,
A. Baden,
G. Bakas,
A. Bakshi,
S. Bannerjee,
P. Bargassa,
D. Barney,
F. Beaudette
, et al. (364 additional authors not shown)
Abstract:
The Compact Muon Solenoid Collaboration is designing a new high-granularity endcap calorimeter, HGCAL, to be installed later this decade. As part of this development work, a prototype system was built, with an electromagnetic section consisting of 14 double-sided structures, providing 28 sampling layers. Each sampling layer has an hexagonal module, where a multipad large-area silicon sensor is glu…
▽ More
The Compact Muon Solenoid Collaboration is designing a new high-granularity endcap calorimeter, HGCAL, to be installed later this decade. As part of this development work, a prototype system was built, with an electromagnetic section consisting of 14 double-sided structures, providing 28 sampling layers. Each sampling layer has an hexagonal module, where a multipad large-area silicon sensor is glued between an electronics circuit board and a metal baseplate. The sensor pads of approximately 1 cm$^2$ are wire-bonded to the circuit board and are readout by custom integrated circuits. The prototype was extensively tested with beams at CERN's Super Proton Synchrotron in 2018. Based on the data collected with beams of positrons, with energies ranging from 20 to 300 GeV, measurements of the energy resolution and linearity, the position and angular resolutions, and the shower shapes are presented and compared to a detailed Geant4 simulation.
△ Less
Submitted 31 March, 2022; v1 submitted 12 November, 2021;
originally announced November 2021.
-
Nanostructured LaFeO$_{3}$-MoS$_{2}$ for efficient photodegradation and photocatalytic hydrogen evolution
Authors:
Subrata Das,
Sagar Dutta,
Angkita Mistry Tama,
M. A. Basith
Abstract:
The fabrication of heterogeneous photocatalysts has received increasing research interest due to their potential applications for the degradation of organic pollutants in wastewater and the evolution of carbon-free hydrogen fuel via water splitting. Here, we report the photodegradation and photocatalytic hydrogen generation abilities of nanostructured LaFeO$_{3}$-MoS$_{2}$ photocatalyst synthesize…
▽ More
The fabrication of heterogeneous photocatalysts has received increasing research interest due to their potential applications for the degradation of organic pollutants in wastewater and the evolution of carbon-free hydrogen fuel via water splitting. Here, we report the photodegradation and photocatalytic hydrogen generation abilities of nanostructured LaFeO$_{3}$-MoS$_{2}$ photocatalyst synthesized by facile hydrothermal technique. Prior to conducting photocatalytic experiments, structural, morphological, and optical properties of the nanocomposite were extensively investigated using X-ray diffraction analysis, field emission scanning electron microscopy, and UV-visible spectroscopy, respectively. Nanostructured LaFeO$_{3}$-MoS$_{2}$ photodegraded 96% of rhodamine B dye within only 150 minutes which is considerably higher than that of LaFeO$_{3}$ and commercial Degussa P25 titania nanoparticles. The LaFeO$_{3}$-MoS$_{2}$ nanocomposite also exhibited significantly enhanced photocatalytic efficiency in the decomposition of a colorless probe pollutant, ciprofloxacin eliminating the possibility of the dye-sensitization effect. Moreover, LaFeO$_{3}$-MoS$_{2}$ demonstrated superior photocatalytic activity towards solar hydrogen evolution via water splitting. Considering the band structures and contribution of reactive species, a direct Z-scheme photocatalytic mechanism is proposed to rationalize the superior photocatalytic behavior of LaFeO$_{3}$-MoS$_{2}$ nanocomposite.
△ Less
Submitted 4 November, 2021;
originally announced November 2021.
-
An atomic frequency comb memory in rare-earth doped thin-film lithium niobate
Authors:
Subhojit Dutta,
Yuqi Zhao,
Uday Saha,
Demitry Farfurnik,
Elizabeth A. Goldschmidt,
Edo Waks
Abstract:
Atomic frequency combs memories that coherently store optical signals are a key building block for optical quantum computers and quantum networks. Integrating such memories into compact and chip-scale devices is essential for scalable quantum technology, but to date most demonstrations have been in bulk materials or waveguides with large cross-sections, or using fabrication techniques not easily a…
▽ More
Atomic frequency combs memories that coherently store optical signals are a key building block for optical quantum computers and quantum networks. Integrating such memories into compact and chip-scale devices is essential for scalable quantum technology, but to date most demonstrations have been in bulk materials or waveguides with large cross-sections, or using fabrication techniques not easily adaptable to wafer scale processing. We demonstrate compact chip-integrated atomic frequency comb storage in rare earth doped thin-film lithium niobate. Our optical memory exhibits a broad storage bandwidth exceeding 100 MHz, and optical storage time of over 250 ns. The enhanced optical confinement in this device structure enables three orders of magnitude reduction in optical power as compared to large ion-diffused waveguides for the same Rabi frequency. These compact atomic frequency comb memories pave the way towards scalable, highly efficient, electro-optically tunable quantum photonic systems that can store and manipulate light on a compact chip.
△ Less
Submitted 22 November, 2021; v1 submitted 2 November, 2021;
originally announced November 2021.
-
Density-Matrix Renormalization Group for Continuous Quantum Systems
Authors:
Shovan Dutta,
Anton Buyskikh,
Andrew J. Daley,
Erich J. Mueller
Abstract:
We introduce a versatile and practical framework for applying matrix product state techniques to continuous quantum systems. We divide space into multiple segments and generate continuous basis functions for the many-body state in each segment. By combining this mapping with existing numerical Density-Matrix Renormalization Group routines, we show how one can accurately obtain the ground-state wav…
▽ More
We introduce a versatile and practical framework for applying matrix product state techniques to continuous quantum systems. We divide space into multiple segments and generate continuous basis functions for the many-body state in each segment. By combining this mapping with existing numerical Density-Matrix Renormalization Group routines, we show how one can accurately obtain the ground-state wave function, spatial correlations, and spatial entanglement entropy directly in the continuum. For a prototypical mesoscopic system of strongly-interacting bosons we demonstrate faster convergence than standard grid-based discretization. We illustrate the power of our approach by studying a superfluid-insulator transition in an external potential. We outline how one can directly apply or generalize this technique to a wide variety of experimentally relevant problems across condensed matter physics and quantum field theory.
△ Less
Submitted 11 August, 2021;
originally announced August 2021.
-
Neural Ordinary Differential Equations for Data-Driven Reduced Order Modeling of Environmental Hydrodynamics
Authors:
Sourav Dutta,
Peter Rivera-Casillas,
Matthew W. Farthing
Abstract:
Model reduction for fluid flow simulation continues to be of great interest across a number of scientific and engineering fields. Here, we explore the use of Neural Ordinary Differential Equations, a recently introduced family of continuous-depth, differentiable networks (Chen et al 2018), as a way to propagate latent-space dynamics in reduced order models. We compare their behavior with two class…
▽ More
Model reduction for fluid flow simulation continues to be of great interest across a number of scientific and engineering fields. Here, we explore the use of Neural Ordinary Differential Equations, a recently introduced family of continuous-depth, differentiable networks (Chen et al 2018), as a way to propagate latent-space dynamics in reduced order models. We compare their behavior with two classical non-intrusive methods based on proper orthogonal decomposition and radial basis function interpolation as well as dynamic mode decomposition. The test problems we consider include incompressible flow around a cylinder as well as real-world applications of shallow water hydrodynamics in riverine and estuarine systems. Our findings indicate that Neural ODEs provide an elegant framework for stable and accurate evolution of latent-space dynamics with a promising potential of extrapolatory predictions. However, in order to facilitate their widespread adoption for large-scale systems, significant effort needs to be directed at accelerating their training times. This will enable a more comprehensive exploration of the hyperparameter space for building generalizable Neural ODE approximations over a wide range of system dynamics.
△ Less
Submitted 22 April, 2021;
originally announced April 2021.
-
Quantum cosmology with symmetry analysis for quintom dark energy model
Authors:
Sourav Dutta,
Muthusamy Lakshmanan,
Subenoy Chakraborty
Abstract:
Quantum cosmology with quintom dark energy model has been investigated in the present work using symmetry analysis of the underlying physical system. In the background of the flat FLRW model quintom cosmological model has been studied using Noether symmetry and appropriate conserved charge is obtained. The Wheeler-DeWitt (WD) equation is constructed on the minisuperspace and solutions are obtained…
▽ More
Quantum cosmology with quintom dark energy model has been investigated in the present work using symmetry analysis of the underlying physical system. In the background of the flat FLRW model quintom cosmological model has been studied using Noether symmetry and appropriate conserved charge is obtained. The Wheeler-DeWitt (WD) equation is constructed on the minisuperspace and solutions are obtained using conserved charge.
△ Less
Submitted 20 April, 2021;
originally announced April 2021.
-
Optical absorption sensing with dual-spectrum silicon LEDs in SOI-CMOS technology
Authors:
Satadal Dutta,
Peter G. Steeneken,
Gerard J. Verbiest
Abstract:
Silicon p-n junction diodes emit low-intensity, broad-spectrum light near 1120 nm in forward bias and between 400-900 nm in reverse bias (avalanche). For the first time, we experimentally achieve optical absorption sensing of pigment in solution with silicon micro LEDs designed in a standard silicon-on-insulator CMOS technology. By driving a single LED in both forward and avalanche modes of operat…
▽ More
Silicon p-n junction diodes emit low-intensity, broad-spectrum light near 1120 nm in forward bias and between 400-900 nm in reverse bias (avalanche). For the first time, we experimentally achieve optical absorption sensing of pigment in solution with silicon micro LEDs designed in a standard silicon-on-insulator CMOS technology. By driving a single LED in both forward and avalanche modes of operation, we steer its electroluminescent spectrum between visible and near-infrared (NIR). We then characterize the vertical optical transmission of both visible and NIR light from the LED through the same micro-droplet specimen to a vertically mounted discrete silicon photodiode. The effective absorption coefficient of carmine solution in glycerol at varying concentrations were extracted from the color ratio in optical coupling. By computing the LED-specific molar absorption coefficient of carmine, we estimate the concentration (0.040 mo/L) and validate the same with a commercial spectrophotometer (0.030 mol/L ). With a maximum observed sensitivity of 1260 /cm /mol L, the sensor is a significant step forward towards low-cost CMOS-integrated optical sensors with silicon LED as the light source intended for biochemical analyses in food sector and plant/human health.
△ Less
Submitted 14 December, 2020;
originally announced December 2020.
-
Construction and commissioning of CMS CE prototype silicon modules
Authors:
B. Acar,
G. Adamov,
C. Adloff,
S. Afanasiev,
N. Akchurin,
B. Akgün,
M. Alhusseini,
J. Alison,
G. Altopp,
M. Alyari,
S. An,
S. Anagul,
I. Andreev,
M. Andrews,
P. Aspell,
I. A. Atakisi,
O. Bach,
A. Baden,
G. Bakas,
A. Bakshi,
P. Bargassa,
D. Barney,
E. Becheva,
P. Behera,
A. Belloni
, et al. (307 additional authors not shown)
Abstract:
As part of its HL-LHC upgrade program, the CMS Collaboration is developing a High Granularity Calorimeter (CE) to replace the existing endcap calorimeters. The CE is a sampling calorimeter with unprecedented transverse and longitudinal readout for both electromagnetic (CE-E) and hadronic (CE-H) compartments. The calorimeter will be built with $\sim$30,000 hexagonal silicon modules. Prototype modul…
▽ More
As part of its HL-LHC upgrade program, the CMS Collaboration is developing a High Granularity Calorimeter (CE) to replace the existing endcap calorimeters. The CE is a sampling calorimeter with unprecedented transverse and longitudinal readout for both electromagnetic (CE-E) and hadronic (CE-H) compartments. The calorimeter will be built with $\sim$30,000 hexagonal silicon modules. Prototype modules have been constructed with 6-inch hexagonal silicon sensors with cell areas of 1.1~$cm^2$, and the SKIROC2-CMS readout ASIC. Beam tests of different sampling configurations were conducted with the prototype modules at DESY and CERN in 2017 and 2018. This paper describes the construction and commissioning of the CE calorimeter prototype, the silicon modules used in the construction, their basic performance, and the methods used for their calibration.
△ Less
Submitted 10 December, 2020;
originally announced December 2020.
-
The DAQ system of the 12,000 Channel CMS High Granularity Calorimeter Prototype
Authors:
B. Acar,
G. Adamov,
C. Adloff,
S. Afanasiev,
N. Akchurin,
B. Akgün,
M. Alhusseini,
J. Alison,
G. Altopp,
M. Alyari,
S. An,
S. Anagul,
I. Andreev,
M. Andrews,
P. Aspell,
I. A. Atakisi,
O. Bach,
A. Baden,
G. Bakas,
A. Bakshi,
P. Bargassa,
D. Barney,
E. Becheva,
P. Behera,
A. Belloni
, et al. (307 additional authors not shown)
Abstract:
The CMS experiment at the CERN LHC will be upgraded to accommodate the 5-fold increase in the instantaneous luminosity expected at the High-Luminosity LHC (HL-LHC). Concomitant with this increase will be an increase in the number of interactions in each bunch crossing and a significant increase in the total ionising dose and fluence. One part of this upgrade is the replacement of the current endca…
▽ More
The CMS experiment at the CERN LHC will be upgraded to accommodate the 5-fold increase in the instantaneous luminosity expected at the High-Luminosity LHC (HL-LHC). Concomitant with this increase will be an increase in the number of interactions in each bunch crossing and a significant increase in the total ionising dose and fluence. One part of this upgrade is the replacement of the current endcap calorimeters with a high granularity sampling calorimeter equipped with silicon sensors, designed to manage the high collision rates. As part of the development of this calorimeter, a series of beam tests have been conducted with different sampling configurations using prototype segmented silicon detectors. In the most recent of these tests, conducted in late 2018 at the CERN SPS, the performance of a prototype calorimeter equipped with ${\approx}12,000\rm{~channels}$ of silicon sensors was studied with beams of high-energy electrons, pions and muons. This paper describes the custom-built scalable data acquisition system that was built with readily available FPGA mezzanines and low-cost Raspberry PI computers.
△ Less
Submitted 8 December, 2020; v1 submitted 7 December, 2020;
originally announced December 2020.
-
Perfect state transfer on hypercubes and its implementation using superconducting qubits
Authors:
Siddhant Singh,
Bibhas Adhikari,
Supriyo Dutta,
David Zueco
Abstract:
We propose a protocol for perfect state transfer between any pair of vertices in a hypercube. Given a pair of distinct vertices in the hypercube we determine a sub-hypercube that contains the pair of vertices as antipodal vertices. Then a switching process is introduced for determining the sub-hypercube of a memory enhanced hypercube that facilitates perfect state transfer between the desired pair…
▽ More
We propose a protocol for perfect state transfer between any pair of vertices in a hypercube. Given a pair of distinct vertices in the hypercube we determine a sub-hypercube that contains the pair of vertices as antipodal vertices. Then a switching process is introduced for determining the sub-hypercube of a memory enhanced hypercube that facilitates perfect state transfer between the desired pair of vertices. Furthermore, we propose a physical architecture for the pretty good state transfer implementation of our switching protocol with fidelity arbitrary close to unity, using superconducting transmon qubits with tunable couplings. The switching is realised by the control over the effective coupling between the qubits resulting from the effect of ancilla qubit couplers for the graph edges. We also report an error bound on the fidelity of state transfer due to faulty implementation of our protocol.
△ Less
Submitted 6 November, 2020;
originally announced November 2020.
-
Identification of the nature of excitons in PPDT2FBT using electroabsorption spectroscopy
Authors:
Subhamoy Sahoo,
Rajdeep Dhar,
Sanjoy Jena,
Soumya Dutta,
Debdutta Ray,
Jayeeta Bhattacharyya
Abstract:
Electroabsorption (EA) measurements can be used to identify the type of excitons contributing to the absorption spectra of semiconductors which have applications in optoelectronics. However, the inferences from the EA measurement greatly depend on the method of fitting and extraction of parameters from the measured spectra. We deconstruct the absorption spectrum by fitting multiple Gaussians and o…
▽ More
Electroabsorption (EA) measurements can be used to identify the type of excitons contributing to the absorption spectra of semiconductors which have applications in optoelectronics. However, the inferences from the EA measurement greatly depend on the method of fitting and extraction of parameters from the measured spectra. We deconstruct the absorption spectrum by fitting multiple Gaussians and obtain the relative contribution of first and second derivative of each absorption band in EA spectrum, which gives indication of the Frenkel, charge transfer or mixed nature of the excitons involved. We check the applicability of the method for pentacene which is widely used and well studied organic semiconductor. We report EA measurements of poly[(2,5-bis(2-hexyldecyloxy)-phenylene)-alt-(5,6-difluoro-4,7-di(thiophen-2-yl)benzo[c]-[1,2,5]-thiadiazole)] (PPDT2FBT). Our analysis shows that besides the feature around 3.07 eV, which is strongly Frenkel-like, most of the absorption bands for PPDT2FBT are mixed states, having relatively high charge transfer contributions. Since charge transfer excitons have higher dissociation efficiencies, we infer PPDT2FBT to be a promising candidate for photovoltaic applications.
△ Less
Submitted 27 September, 2020;
originally announced September 2020.
-
Measurement of collisions between laser cooled cesium atoms and trapped cesium ions
Authors:
Sourav Dutta,
S. A. Rangwala
Abstract:
We report the measurement of collision rate coefficient for collisions between ultracold Cs atoms and low energy Cs+ ions. The experiments are performed in a hybrid trap consisting of a magneto-optical trap (MOT) for Cs atoms and a Paul trap for Cs+ ions. The ion-atom collisions impart kinetic energy to the ultracold Cs atoms resulting in their escape from the shallow MOT and, therefore, in a redu…
▽ More
We report the measurement of collision rate coefficient for collisions between ultracold Cs atoms and low energy Cs+ ions. The experiments are performed in a hybrid trap consisting of a magneto-optical trap (MOT) for Cs atoms and a Paul trap for Cs+ ions. The ion-atom collisions impart kinetic energy to the ultracold Cs atoms resulting in their escape from the shallow MOT and, therefore, in a reduction in the number of Cs atoms in the MOT. By monitoring, using fluorescence measurements, the Cs atom number and the MOT loading dynamics and then fitting the data to a rate equation model, the ion-atom collision rate is derived. The Cs-Cs+ collision rate coefficient $9.3(\pm0.4)(\pm1.2)(\pm3.5) \times 10^{-14}$ m$^{3}$s$^{-1}$, measured for an ion distribution with most probable collision energy of 95 meV ($\approx k_{B}.1100$ K), is in fair agreement with theoretical calculations. As an intermediate step, we also determine the photoionization cross section of Cs $6P_{3/2}$ atoms at 473 nm wavelength to be $2.28 (\pm 0.33) \times 10^{-21}$ m$^{2}$.
△ Less
Submitted 19 August, 2020;
originally announced August 2020.
-
An Ising Hamiltonian Solver using Stochastic Phase-Transition Nano- Oscillators
Authors:
Sourav Dutta,
Abhishek Khanna,
Adou S. Assoa,
Hanjong Paik,
Darrell Schlom,
Zoltan Toroczkai,
Arijit Raychowdhury,
Suman Datta
Abstract:
Computationally hard problems, including combinatorial optimization, can be mapped into the problem of finding the ground-state of an Ising Hamiltonian. Building physical systems with collective computational ability and distributed parallel processing capability can accelerate the ground-state search. Here, we present a continuous-time dynamical system (CTDS) approach where the ground-state solut…
▽ More
Computationally hard problems, including combinatorial optimization, can be mapped into the problem of finding the ground-state of an Ising Hamiltonian. Building physical systems with collective computational ability and distributed parallel processing capability can accelerate the ground-state search. Here, we present a continuous-time dynamical system (CTDS) approach where the ground-state solution appears as stable points or attractor states of the CTDS. We harness the emergent dynamics of a network of phase-transition nano-oscillators (PTNO) to build an Ising Hamiltonian solver. The hardware fabric comprises of electrically coupled injection-locked stochastic PTNOs with bi-stable phases emulating artificial Ising spins. We demonstrate the ability of the stochastic PTNO-CTDS to progressively find more optimal solution by increasing the strength of the injection-locking signal - akin to performing classical annealing. We demonstrate in silico that the PTNO-CTDS prototype solves a benchmark non-deterministic polynomial time (NP)-hard Max-Cut problem with high probability of success. Using experimentally calibrated numerical simulations and incorporating non-idealities, we investigate the performance of our Ising Hamiltonian solver on dense Max-Cut problems with increasing graph size. We report a high energy-efficiency of 1.3x10^7 solutions/sec/Watt for 100-node dense Max-cut problems which translates to a 5x improvement over the recently demonstrated memristor-based Hopfield network and several orders of magnitude improvement over other candidates such as CPU and GPU, quantum annealer and photonic Ising solver approaches. Such an energy efficient hardware exhibiting high solution-throughput/Watt can find applications in industrial planning and manufacturing, defense and cyber-security, bioinformatics and drug discovery.
△ Less
Submitted 28 February, 2021; v1 submitted 23 July, 2020;
originally announced July 2020.
-
Large amplitude electromagnetic solitons in a fully relativistic magnetized electron-positron-pair plasma
Authors:
Gadadhar Banerjee,
Sayantan Dutta,
A. P. Misra
Abstract:
Nonlinear propagation of purely stationary large amplitude electromagnetic (EM) solitary waves in a magnetized electron-positron (EP) plasma is studied using a fully relativistic two-fluid hydrodynamic model which accounts for physical regimes of both weakly relativistic $(P\ll nmc^2)$ and ultrarelativistic $(P\gg nmc^2)$ random thermal energies. Here, $P$ is the thermal pressure, $n$ the number d…
▽ More
Nonlinear propagation of purely stationary large amplitude electromagnetic (EM) solitary waves in a magnetized electron-positron (EP) plasma is studied using a fully relativistic two-fluid hydrodynamic model which accounts for physical regimes of both weakly relativistic $(P\ll nmc^2)$ and ultrarelativistic $(P\gg nmc^2)$ random thermal energies. Here, $P$ is the thermal pressure, $n$ the number density and $m$ the mass of a particle, and $c$ is the speed of light in vacuum. Previous theory in the literature [Phys. Plasmas \textbf{11}, 3078 (2004)] is advanced and generalized by the relativistic thermal motion of both electrons and positrons. While both the sub-Alfv{é}nic and super-Alfv{é}nic solitons coexist in the weakly relativistic regime, the ultrarelativistic EP plasmas in contrast support only the sub-Alfv{é}nic solitons. Different limits of the Mach numbers and soliton amplitudes are also examined in these two physical regimes.
△ Less
Submitted 4 June, 2020; v1 submitted 13 May, 2020;
originally announced May 2020.
-
Dynamics of Interacting Hotspots -- I
Authors:
Suman Dutta
Abstract:
The worldwide spread of COVID-19 has called for fast advancement of new modelling strategies to estimate its unprecedented spread. Here, we introduce a model based on the fundamental SIR equations with a stochastic disorder by a random exchange of infected populations between cities to study dynamics in an interacting network of epicentres in a model state. Although each stochastic exchange conser…
▽ More
The worldwide spread of COVID-19 has called for fast advancement of new modelling strategies to estimate its unprecedented spread. Here, we introduce a model based on the fundamental SIR equations with a stochastic disorder by a random exchange of infected populations between cities to study dynamics in an interacting network of epicentres in a model state. Although each stochastic exchange conserves populations pair-wise, the disorder drives the global system towards newer routes to dynamic equilibrium. Upon controlling the range of the exchange fraction, we show that it is possible to control the heterogeneity in the spread and the co-operativity among the interacting hotspots. Data of collective temporal evolution of the infected populations in federal states of Germany validate the qualitative features of the model.
△ Less
Submitted 24 April, 2020;
originally announced April 2020.
-
Dynamics of Interacting Hotspots - II
Authors:
Suman Dutta
Abstract:
In the absence of any proper clinical solution, human civilization is only left with sophisticated intervention measures to contain the spread of COVID-19. However, the existing models to estimate the intervention does not take into account the realistic connectivity of the epicentres of the pandemic. We generalise our earlier model of interacting hotspots to test various possibilities of interven…
▽ More
In the absence of any proper clinical solution, human civilization is only left with sophisticated intervention measures to contain the spread of COVID-19. However, the existing models to estimate the intervention does not take into account the realistic connectivity of the epicentres of the pandemic. We generalise our earlier model of interacting hotspots to test various possibilities of intervention in a model state consisting of multiple epicentres. We also analyse situations when the hotspots are spatially correlated and the interaction is limited to population exchanges with the nearest neighbours. We show that the heterogeneity in the infection propagation is solely dependent on the protocol of the containment and its strength. We explore many such situations and discuss possibilities.
△ Less
Submitted 24 April, 2020;
originally announced April 2020.
-
Pitch-rotational manipulation of single cells and particles using single-beam thermo-optical tweezers
Authors:
Sumeet Kumar,
M. Gunaseelan,
Rahul Vaippully,
Amrendra Kumar,
Mithun Ajith,
Gaurav Vaidya,
Soumya Dutta,
Basudev Roy
Abstract:
3D pitch rotation of microparticles and cells assumes importance in a wide variety of applications in biology, physics, chemistry and medicine. Applications such as cell imaging and injection benefit from pitch-rotational manipulation. Generation of such motion in single beam optical tweezers has remained elusive due to complicacies of generating high enough ellipticity perpendicular to the direct…
▽ More
3D pitch rotation of microparticles and cells assumes importance in a wide variety of applications in biology, physics, chemistry and medicine. Applications such as cell imaging and injection benefit from pitch-rotational manipulation. Generation of such motion in single beam optical tweezers has remained elusive due to complicacies of generating high enough ellipticity perpendicular to the direction of propagation. Further, trapping an extended object at two locations can only generate partial pitch motion by moving one of the foci in the axial direction. Here, we use hexagonal-shaped upconverting particles and single cells trapped close to a gold-coated glass cover slip in a sample chamber to generate complete 360 degree and continuous pitch motion even with a single optical tweezers beam. The tweezers beam passing through the gold surface is partially absorbed and generates a hot-spot to produce circulatory convective flows in the vicinity which rotates the objects. The rotation rate can be controlled by the intensity of the laser light and the thickness of the gold layer. Thus such a simple configuration can turn the particle in the pitch sense. The circulatory flows in this technique have a diameter of about 5 $μ$m which is smaller than those reported using acousto-fluidic techniques.
△ Less
Submitted 9 March, 2020;
originally announced March 2020.
-
Multirate Timestepping for the Incompressible Navier-Stokes Equations in Overlapping Grids
Authors:
Ketan Mittal,
Som Dutta,
Paul Fischer
Abstract:
We develop a multirate timestepper for semi-implicit solutions of the unsteady incompressible Navier-Stokes equations (INSE) based on a recently-developed multidomain spectral element method (SEM). For {\em incompressible} flows, multirate timestepping (MTS) is particularly challenging because of the tight coupling implied by the incompressibility constraint, which manifests as an elliptic subprob…
▽ More
We develop a multirate timestepper for semi-implicit solutions of the unsteady incompressible Navier-Stokes equations (INSE) based on a recently-developed multidomain spectral element method (SEM). For {\em incompressible} flows, multirate timestepping (MTS) is particularly challenging because of the tight coupling implied by the incompressibility constraint, which manifests as an elliptic subproblem for the pressure at each timestep. The novelty of our approach stems from the development of a stable overlapping Schwarz method applied directly to the Navier-Stokes equations, rather than to the convective, viscous, and pressure substeps that are at the heart of most INSE solvers. Our MTS approach is based on a predictor-corrector (PC) strategy that preserves the temporal convergence of the underlying semi-implicit timestepper. We present numerical results demonstrating that this approach scales to an arbitrary number of overlapping grids, accurately models complex turbulent flow phenomenon, and improves computational efficiency in comparison to singlerate timestepping-based calculations.
△ Less
Submitted 16 April, 2021; v1 submitted 29 February, 2020;
originally announced March 2020.
-
A greedy non-intrusive reduced order model for shallow water equations
Authors:
Sourav Dutta,
Matthew W. Farthing,
Emma Perracchione,
Gaurav Savant,
Mario Putti
Abstract:
In this work, we develop Non-Intrusive Reduced Order Models (NIROMs) that combine Proper Orthogonal Decomposition (POD) with a Radial Basis Function (RBF) interpolation method to construct efficient reduced order models for time-dependent problems arising in large scale environmental flow applications. The performance of the POD-RBF NIROM is compared with a traditional nonlinear POD (NPOD) model b…
▽ More
In this work, we develop Non-Intrusive Reduced Order Models (NIROMs) that combine Proper Orthogonal Decomposition (POD) with a Radial Basis Function (RBF) interpolation method to construct efficient reduced order models for time-dependent problems arising in large scale environmental flow applications. The performance of the POD-RBF NIROM is compared with a traditional nonlinear POD (NPOD) model by evaluating the accuracy and robustness for test problems representative of riverine flows. Different greedy algorithms are studied in order to determine a near-optimal distribution of interpolation points for the RBF approximation. A new power-scaled residual greedy (psr-greedy) algorithm is proposed to address some of the primary drawbacks of the existing greedy approaches. The relative performances of these greedy algorithms are studied with numerical experiments using realistic two-dimensional (2D) shallow water flow applications involving coastal and riverine dynamics.
△ Less
Submitted 4 May, 2021; v1 submitted 26 February, 2020;
originally announced February 2020.
-
Direct Numerical Simulation of Rotating Ellipsoidal Particles using Moving Nonconforming Schwarz-Spectral Element Method
Authors:
Ketan Mittal,
Som Dutta,
Paul Fischer
Abstract:
We present application of a highly-scalable overlapping grid-based nonconforming Schwarz-spectral element method (Schwarz-SEM) to study the dynamics of rotating ellipsoidal particles. The current study is one of the first to explore the effect of rotation on ellipsoidal particles using fully resolved simulations (direct numerical simulation). The rotating ellipsoidal particles show substantial dif…
▽ More
We present application of a highly-scalable overlapping grid-based nonconforming Schwarz-spectral element method (Schwarz-SEM) to study the dynamics of rotating ellipsoidal particles. The current study is one of the first to explore the effect of rotation on ellipsoidal particles using fully resolved simulations (direct numerical simulation). The rotating ellipsoidal particles show substantial difference in the dynamics of the flow, when compared against non-rotating particles. The difference is primarily due to periodic attachment and separation of the flow to the surface of the particle for the rotating cases, which results in a higher drag on the particles when compared to the corresponding non-rotating cases. The dynamics is also different from a rotating spherical particle, where a steady shear layer develops near the surface of the sphere. For the rotating ellipsoidal particles, this mechanism results in a phase-difference between the position of observed maximum and minimum drag, and the position of expected maximum and minimum drag (i.e., maximum and minimum projected area). A similar phase-difference is also observed for the lift acting on the rotating ellipsoidal particles. The results presented here demonstrate the importance of explicitly modeling the shape and rotation of particles when we study the dynamics of non-spherical particles. Finally, the study also validates the use of non-conforming Schwarz-SEM for tackling problems in fully resolved particulate flow dynamics.
△ Less
Submitted 19 March, 2020; v1 submitted 9 December, 2019;
originally announced December 2019.
-
An Integrated Photonic Platform for Rare-Earth Ions in Thin Film Lithium Niobate
Authors:
Subhojit Dutta,
Elizabeth A. Goldschmidt,
Sabyasachi Barik,
Uday Saha,
Edo Waks
Abstract:
Rare-earth ion ensembles doped in single crystals are a promising materials system with widespread applications in optical signal processing, lasing, and quantum information processing. Incorporating rare-earth ions into integrated photonic devices could enable compact lasers and modulators, as well as on-chip optical quantum memories for classical and quantum optical applications. To this end, a…
▽ More
Rare-earth ion ensembles doped in single crystals are a promising materials system with widespread applications in optical signal processing, lasing, and quantum information processing. Incorporating rare-earth ions into integrated photonic devices could enable compact lasers and modulators, as well as on-chip optical quantum memories for classical and quantum optical applications. To this end, a thin film single crystalline wafer structure that is compatible with planar fabrication of integrated photonic devices would be highly desirable. However, incorporating rare-earth ions into a thin film form-factor while preserving their optical properties has proven challenging. We demonstrate an integrated photonic platform for rare-earth ions doped in a single crystalline thin film on insulator. The thin film is composed of lithium niobate doped with Tm3+. The ions in the thin film exhibit optical lifetimes identical to those measured in bulk crystals. We show narrow spectral holes in a thin film waveguide that require up to 2 orders of magnitude lower power to generate than previously reported bulk waveguides. Our results pave way for scalable on-chip lasers, optical signal processing devices, and integrated optical quantum memories.
△ Less
Submitted 14 November, 2019;
originally announced November 2019.