Showing 1–50 of 363 results for author: Ghosh, S

Optically Pumped Terahertz Amplitude Modulation in Type-II Ge QD/Si heterostructures grown via Molecular Beam Epitaxy

Authors: Suprovat Ghosh, Abir Mukherjee, Sudarshan Singh, Samit K Ray, Ananjan Basu, Santanu Manna, Samaresh Das

Abstract: This article exploits group-IV germanium (Ge) quantum dots (QDs) on Silicon-on-Insulator (SOI) grown by molecular beam epitaxy (MBE) in order to explore its optical behaviour in the Terahertz (THz) regime. In this work, Ge QDs, pumped by an above bandgap near infrared wavelength, exhibit THz amplitude modulation in the frequency range of 0.1-1.0 THz. The epitaxial Ge QDs outperform reference SOI s… ▽ More This article exploits group-IV germanium (Ge) quantum dots (QDs) on Silicon-on-Insulator (SOI) grown by molecular beam epitaxy (MBE) in order to explore its optical behaviour in the Terahertz (THz) regime. In this work, Ge QDs, pumped by an above bandgap near infrared wavelength, exhibit THz amplitude modulation in the frequency range of 0.1-1.0 THz. The epitaxial Ge QDs outperform reference SOI substrate in THz amplitude modulation owing to higher carrier generation in weakly confined dots compared to its bulk counterpart. This is further corroborated using theoretical model based on the non-equilibrium Green's function (NEGF) method. This model enables the calculation of photo carriers generated (PCG) and their confinement in the Ge QD region. Our model also reroutes the calculation from PCG to corresponding plasma frequency and hence to refractive index and THz photo-conductivity. Moreover, the photo-generated confined holes accumulation at the Ge QDs-Si interface is elevated after optical illumination, leading to a decreased THz photo-conductivity. This augmentation in THz photo-conductivity contributes to a significant enhancement of THz modulation depth ~77% at Ge QDs-Si interfaces compared to bare SOI at 0.1 THz. △ Less

Submitted 3 July, 2024; originally announced July 2024.

Comments: 15 pages, 5 figures

Study of ion induced Inner Shell Ionization cross section through electron capture mechanism

Authors: Sumana Ghosh, Debasis Mitra, Soumya Chatterjee

Abstract: Electron Capture (EC) cross-section from K, L and M shells of the target atoms to the vacant K, L and M shells of the projectile ions have been calculated by deriving the accurate momentum transfer to the captured electrons for different charge states. Several correction factors like polarization correction, relativistic effects (R) of the target wave function, Coulomb-deflection factor (C) due to… ▽ More Electron Capture (EC) cross-section from K, L and M shells of the target atoms to the vacant K, L and M shells of the projectile ions have been calculated by deriving the accurate momentum transfer to the captured electrons for different charge states. Several correction factors like polarization correction, relativistic effects (R) of the target wave function, Coulomb-deflection factor (C) due to the effect of the repulsion between the projectile and the target nucleus, correction for projectile energy loss have been introduced. The mean charge state of the projectiles inside the target material has been estimated using suitable empirical models and the fractional charge state distribution has been calculated considering Lorentz distribution. Fractional distribution of charge state of the projectile ions is used to obtain the charge state contributions of the electron capture cross-sections. The effect of Simultaneous Multiple Ionization (SMI) has been considered in the theory of Direct Coulomb Ionization (DCI). The theoretically obtained total cross-sections have been compared with the experimental findings obtained from various literature. The computation scheme has been depicted through sample calculations of ionization cross-sections through electron capture mechanism. △ Less

Submitted 2 July, 2024; originally announced July 2024.

XENONnT WIMP Search: Signal & Background Modeling and Statistical Inference

Authors: XENON Collaboration, E. Aprile, J. Aalbers, K. Abe, S. Ahmed Maouloud, L. Althueser, B. Andrieu, E. Angelino, D. Antón Martin, F. Arneodo, L. Baudis, M. Bazyk, L. Bellagamba, R. Biondi, A. Bismark, K. Boese, A. Brown, G. Bruno, R. Budnik, J. M. R. Cardoso, A. P. Cimental Chávez, A. P. Colijn, J. Conrad, J. J. Cuenca-García, V. D'Andrea , et al. (139 additional authors not shown)

Abstract: The XENONnT experiment searches for weakly-interacting massive particle (WIMP) dark matter scattering off a xenon nucleus. In particular, XENONnT uses a dual-phase time projection chamber with a 5.9-tonne liquid xenon target, detecting both scintillation and ionization signals to reconstruct the energy, position, and type of recoil. A blind search for nuclear recoil WIMPs with an exposure of 1.1 t… ▽ More The XENONnT experiment searches for weakly-interacting massive particle (WIMP) dark matter scattering off a xenon nucleus. In particular, XENONnT uses a dual-phase time projection chamber with a 5.9-tonne liquid xenon target, detecting both scintillation and ionization signals to reconstruct the energy, position, and type of recoil. A blind search for nuclear recoil WIMPs with an exposure of 1.1 tonne-years yielded no signal excess over background expectations, from which competitive exclusion limits were derived on WIMP-nucleon elastic scatter cross sections, for WIMP masses ranging from 6 GeV/$c^2$ up to the TeV/$c^2$ scale. This work details the modeling and statistical methods employed in this search. By means of calibration data, we model the detector response, which is then used to derive background and signal models. The construction and validation of these models is discussed, alongside additional purely data-driven backgrounds. We also describe the statistical inference framework, including the definition of the likelihood function and the construction of confidence intervals. △ Less

Submitted 19 June, 2024; originally announced June 2024.

Comments: 20 pages, 10 figures

Highly Sensitive Label-free Biomolecular Detection Using Au-WS2 Nanohybrid Based SERS Substrates

Authors: Om Prakash, Abhijith T, Priya Nagpal, Vivekanandan Perumal, Supravat Karak, Udai B. Singh, Santanu Ghosh

Abstract: Recent advancements in nanotechnology have led to the development of surface-enhanced Raman spectroscopy (SERS) based rapid and low-cost technologies for ultra-sensitive label-free detection and identification of molecular analytes. Herein, we utilized the synergistic plasmonic and chemical enhancement effects of Au-WS2 nanohybrids to attain the high-intensity Raman signals of targeted analytes. T… ▽ More Recent advancements in nanotechnology have led to the development of surface-enhanced Raman spectroscopy (SERS) based rapid and low-cost technologies for ultra-sensitive label-free detection and identification of molecular analytes. Herein, we utilized the synergistic plasmonic and chemical enhancement effects of Au-WS2 nanohybrids to attain the high-intensity Raman signals of targeted analytes. To develop these nanohybrids, a series of monodispersed Au nanoparticles (NPs) of varying diameters from 20 to 80 nm was chemically synthesized and successively blended with liquid-phase exfoliated WS2 nano-flakes of average lateral size 90 nm. They provided a maximum enhancement factor (EF) of ~1.80 109 corresponding to the characteristic peaks at 1364 cm-1 and 1512 cm-1 for R6G analyte molecules. Theoretical studies based on the finite-difference time-domain simulations on Au-WS2 nanohybrid systems revealed a huge field-intensity enhancement with an EF of more than 1000 at the plasmonic hotspots, which was induced by the strong coupling of individual plasmon oscillations of the adjacent Au NPs upon light interactions. These electromagnetic effects along with the chemical enhancement effects of WS2 nanoflakes were found to be mainly responsible for such huge enhancement in Raman signals. Furthermore, these hybrids were successfully employed for achieving highly sensitive detection of the E. coli ATCC 35218 bacterial strain with a concentration of 104 CFU/mL in phosphate-buffered saline media, indicating their real capabilities for practical scenarios. The findings of the present study will indeed provide vital information in the development of innovative nanomaterial-based biosensors, that will offer new possibilities for addressing critical public health concerns. △ Less

Submitted 19 June, 2024; originally announced June 2024.

Using graph neural networks to reconstruct charged pion showers in the CMS High Granularity Calorimeter

Authors: M. Aamir, B. Acar, G. Adamov, T. Adams, C. Adloff, S. Afanasiev, C. Agrawal, C. Agrawal, A. Ahmad, H. A. Ahmed, S. Akbar, N. Akchurin, B. Akgul, B. Akgun, R. O. Akpinar, E. Aktas, A. AlKadhim, V. Alexakhin, J. Alimena, J. Alison, A. Alpana, W. Alshehri, P. Alvarez Dominguez, M. Alyari, C. Amendola , et al. (550 additional authors not shown)

Abstract: A novel method to reconstruct the energy of hadronic showers in the CMS High Granularity Calorimeter (HGCAL) is presented. The HGCAL is a sampling calorimeter with very fine transverse and longitudinal granularity. The active media are silicon sensors and scintillator tiles readout by SiPMs and the absorbers are a combination of lead and Cu/CuW in the electromagnetic section, and steel in the hadr… ▽ More A novel method to reconstruct the energy of hadronic showers in the CMS High Granularity Calorimeter (HGCAL) is presented. The HGCAL is a sampling calorimeter with very fine transverse and longitudinal granularity. The active media are silicon sensors and scintillator tiles readout by SiPMs and the absorbers are a combination of lead and Cu/CuW in the electromagnetic section, and steel in the hadronic section. The shower reconstruction method is based on graph neural networks and it makes use of a dynamic reduction network architecture. It is shown that the algorithm is able to capture and mitigate the main effects that normally hinder the reconstruction of hadronic showers using classical reconstruction methods, by compensating for fluctuations in the multiplicity, energy, and spatial distributions of the shower's constituents. The performance of the algorithm is evaluated using test beam data collected in 2018 prototype of the CMS HGCAL accompanied by a section of the CALICE AHCAL prototype. The capability of the method to mitigate the impact of energy leakage from the calorimeter is also demonstrated. △ Less

Submitted 30 June, 2024; v1 submitted 17 June, 2024; originally announced June 2024.

Comments: Prepared for submission to JINST

Cracking of submerged beds

Authors: Satyanu Bhadra, Anit Sane, Akash Ghosh, Shankar Ghosh, Kirti Chandra Sahu

Abstract: We investigate the phenomena of crater formation and gas release caused by projectile impact on underwater beds, which occurs in many natural, geophysical, and industrial applications. The bed in our experiment is constructed of hydrophobic particles, which trap a substantial amount of air in its pores. In contrast to dry beds, the air-water interface in a submerged bed generates a granular skin t… ▽ More We investigate the phenomena of crater formation and gas release caused by projectile impact on underwater beds, which occurs in many natural, geophysical, and industrial applications. The bed in our experiment is constructed of hydrophobic particles, which trap a substantial amount of air in its pores. In contrast to dry beds, the air-water interface in a submerged bed generates a granular skin that provides rigidity to the medium by producing skin over the bulk. The projectile's energy is used to reorganise the grains, which causes the skin to crack, allowing the trapped air to escape. The morphology of the craters as a function of impact energy in submerged beds exhibits different scaling laws than what is known for dry beds. This phenomenon is attributed to the contact line motion on the hydrophobic fractal-like surface of submerged grains. The volume of the gas released is a function of multiple factors, chiefly the velocity of the projectile, depth of the bed and depth of the water column. △ Less

Submitted 24 May, 2024; originally announced May 2024.

Comments: 15 pages, 10 figures

Open-Path Detection of Organic Vapors via Quantum Infrared Spectroscopy

Authors: Simon Neves, Adimulya Kartiyasa, Shayantani Ghosh, Geoffrey Gaulier, Luca La Volpe, Jean-Pierre Wolf

Abstract: In recent years, quantum Fourier transform infrared (QFTIR) spectroscopy emerged as an alternative to conventional spectroscopy in the mid-infrared region of the spectrum. By harnessing induced coherence and spectral entanglement, QFTIR offers promising potential for the practical detection of organic gasses. However, little research was conducted to bring QFTIR spectrometers closer to domestic or… ▽ More In recent years, quantum Fourier transform infrared (QFTIR) spectroscopy emerged as an alternative to conventional spectroscopy in the mid-infrared region of the spectrum. By harnessing induced coherence and spectral entanglement, QFTIR offers promising potential for the practical detection of organic gasses. However, little research was conducted to bring QFTIR spectrometers closer to domestic or in-field usage. In this work, we present the first use of a QFTIR spectrometer for open-path detection of multiple interfering organic gases in ambient air. The accurate identification of mixtures of acetone, methanol, and ethanol vapors is demonstrated with a QFTIR spectrometer. We achieved this breakthrough by building a nonlinear Michelson interferometer with 1.7m-long arms to increase the absorption length, coupled with analysis techniques from differential absorption spectroscopy. The evolution of different gasses' concentrations in ambient air was measured through time. These results constitute the first use-case of a QFTIR spectrometer as a detector of organic gasses, and thus represent an important milestone towards the development of such detectors in practical situations. △ Less

Submitted 23 May, 2024; v1 submitted 21 May, 2024; originally announced May 2024.

Comments: 8 pages, 7 figures, 1 table. For associated gif file, see https://filesender.switch.ch/filesender2/?s=download&token=55a748d4-ab44-4621-9d4d-2266f4223270

Hydrodynamic instability of shear imposed falling film over a uniformly heated inclined undulated substrate

Authors: Md. Mouzakkir Hossain, Sukhendu Ghosh, Harekrushna Behera, G. P. Raja Sekhar

Abstract: Linear and weakly nonlinear stability analyses of an externally shear-imposed, gravity-driven falling film over a uniformly heated wavy substrate are studied. The longwave asymptotic expansion technique is utilized to formulate a single nonlinear free surface deflection equation. The linear stability criteria for the onset of instability are derived using the normal mode form in the linearized por… ▽ More Linear and weakly nonlinear stability analyses of an externally shear-imposed, gravity-driven falling film over a uniformly heated wavy substrate are studied. The longwave asymptotic expansion technique is utilized to formulate a single nonlinear free surface deflection equation. The linear stability criteria for the onset of instability are derived using the normal mode form in the linearized portion of the surface deformation equation. Linear stability theory reveals that the flow-directed sturdy external shear grows the surface wave instability by increasing the net driving force. On the contrary, the upstream-directed imposed shear may reduce the surface mode instability by restricting the gravity-driving force, which has the consequence of weakening the bulk velocity of the liquid film. However, the surface mode can be stabilized/destabilized by increasing the temperature-dependent density/surface-tension variation. Further, the bottom steepness shows dual behaviour on the surface instability depending upon the wavy wall's portion (uphill/downhill). At the downhill portion, the surface wave becomes more unstable than at the bottom substrate's uphill portion. Moreover, the multi-scale method is incorporated to obtain the complex Ginzburg-Landau equation in order to study the weakly nonlinear stability, confirming the existence of various flow regions of the liquid film. At any bottom portion (uphill/downhill), the flow-directed external shear expands the super-critical stable zones, which causes an amplification in the nonlinear wave amplitude, and the backflow-directed shear plays a counterproductive role. On the other hand, the super-critical stable region decreases or increases as long as the linear variation of density or surface tension increases with respect to the temperature, whereas the sub-critical unstable region exhibits an inverse trend. △ Less

Submitted 21 May, 2024; originally announced May 2024.

Comments: 29 pages, 46 figures, and 5 tables

Exciton polariton critical non-Hermitian skin effect with spin-momentum-locked gains

Authors: Xingran Xu, Lingyu Tian, Zhiyuan An, Qihua Xiong, Sanjib Ghosh

Abstract: The critical skin effect, an intriguing phenomenon in non-Hermitian systems, displays sensitivity to system size and manifests distinct dynamical behaviors. In this work, we propose a novel scheme to achieve the critical non-Hermitian skin effect of exciton polaritons in an elongated microcavity system. We show that by utilising longitudinal-transverse spin splitting and spin-momentum-locked gain,… ▽ More The critical skin effect, an intriguing phenomenon in non-Hermitian systems, displays sensitivity to system size and manifests distinct dynamical behaviors. In this work, we propose a novel scheme to achieve the critical non-Hermitian skin effect of exciton polaritons in an elongated microcavity system. We show that by utilising longitudinal-transverse spin splitting and spin-momentum-locked gain, a critical non-Hermitian skin effect can be achieved in a continuous system without the need of an underlying lattice. We find that a phase transition can be induced by changing the cavity detuning with respect to the exciton energy. We identify a measurable order parameter associated with this phase transition and demonstrate the corresponding critical behavior. Our work offers a flexible approach to manipulate non-Hermitian phases of exciton polaritons, thereby expanding the potential applications of polaritonic devices. △ Less

Submitted 19 May, 2024; originally announced May 2024.

One-step Pulsed Laser Deposition of Metal oxynitride/Carbon Composites for Supercapacitor Application

Authors: Subrata Ghosh, Giacomo Pagani, Massimilano Righi, Chengxi Hou, Valeria Russo, Carlo S. Casari

Abstract: Advanced material composite of nanocarbons and metal-based materials provides a synergistic effect to obtain excellent electrochemical charge-storage performance and other properties. Herein, 3D porous carbon-metal oxynitride nanocomposites with tunable carbon/metal and oxygen/nitrogen ratio are synthesized uniquely by simultaneous ablation from two different targets by single-step pulsed laser de… ▽ More Advanced material composite of nanocarbons and metal-based materials provides a synergistic effect to obtain excellent electrochemical charge-storage performance and other properties. Herein, 3D porous carbon-metal oxynitride nanocomposites with tunable carbon/metal and oxygen/nitrogen ratio are synthesized uniquely by simultaneous ablation from two different targets by single-step pulsed laser deposition at room temperature. Co ablation of titanium and vanadium nitride targets together with graphite allowed us to synthesize carbon-metal oxynitride porous nanocomposite and exploit them as a binder-free thin film supercapacitor electrode in aqueous electrolyte. We show that the elemental composition ratio and hence the structural properties can be tuned by selecting target configuration and by manipulating the ablation position. We investigate how this tuning capability impacts their charge-storage performances. We anticipate the utilization of as-synthesized various composites in a single PLD production run as next-generation active materials for flexible energy storage and optoelectronic applications. △ Less

Submitted 16 May, 2024; originally announced May 2024.

Comments: 18 pages, 7 Figures, 1 table, 4 supplementary figures

Neutron and $\boldsymbolγ$-ray Discrimination by a Pressurized Helium-4 Based Scintillation Detector

Authors: Shubham Dutta, Sayan Ghosh, Satyajit Saha

Abstract: Pressurized helium-4 based fast neutron scintillation detector offers an useful alternative to organic liquid-based scintillator due to its relatively low response to the $γ$-rays compared to the latter type of scintillator. In the present work, we have investigated the capabilities of a pressurized $^4$He (PHe) detector for the detection of fast neutrons in a mixed radiation field where both the… ▽ More Pressurized helium-4 based fast neutron scintillation detector offers an useful alternative to organic liquid-based scintillator due to its relatively low response to the $γ$-rays compared to the latter type of scintillator. In the present work, we have investigated the capabilities of a pressurized $^4$He (PHe) detector for the detection of fast neutrons in a mixed radiation field where both the neutrons and the $γ$-rays are present. Discrimination between neutrons and $γ$-rays is achieved by using fast-slow charge integration method. We have also conducted systematic studies of the attenuation of fast neutrons and $γ$-rays by high-density polyethylene (HDPE). These studies are further corroborated by simulation analyses conducted using GEANT4, which show qualitative agreement with the experimental results. Additionally, the simulation provides detailed insights into the interactions of the radiation quanta with the PHe detector. Estimates of the scintillation signal yield are made based on our GEANT4 simulation results by considering the scintillation mechanism in the PHe gas. △ Less

Submitted 1 July, 2024; v1 submitted 15 May, 2024; originally announced May 2024.

Ballistic-aggregated Carbon Nanofoam in Target-side of Pulsed Laser Deposition for Energy Storage Applications

Authors: Subrata Ghosh, Massimiliano Righi, Andrea Macrelli, Davide Orecchia, Alessandro Maffini, Francesco Goto, Gianlorenzo Bussetti, David Dellasega, Valeria Russo, Andrea Li Bassi, Carlo S. Casari

Abstract: In pulsed laser deposition, along conventional deposition on frontside of plasma-plume, target is getting coated on its surface too. For reproducibility, cleaning those residues is the most adopted approach. Herein, we investigate the target-side coated materials and employ them as a binder-free supercapacitor electrode. Ballistic aggregated target-side nanofoam is compact and contains higher sp2-… ▽ More In pulsed laser deposition, along conventional deposition on frontside of plasma-plume, target is getting coated on its surface too. For reproducibility, cleaning those residues is the most adopted approach. Herein, we investigate the target-side coated materials and employ them as a binder-free supercapacitor electrode. Ballistic aggregated target-side nanofoam is compact and contains higher sp2-carbon, higher nitrogen content with higher graphitic-N and lower oxygen content with lower COOH group than that of diffusive aggregated conventional nanofoams. They are highly hydrogenated graphite-like amorphous carbon and superhydrophilic. The symmetric microsupercapacitor delivers higher volumetric capacitance of 522 mF/cm3 at 100 mV/s and 104% retention after 10000 charge-discharge cycles over conventional nanofoam (215 mF/cm3 and 85% retention) with the areal capacitance of 134 μF/cm2 at 120 Hz and ultrafast frequency response. Utilizing those residue materials is of great importance towards sustainable development, zero-waste, and utilization of deposition techniques in full-phase, which is resource-efficient, energy competent and cost-effective. △ Less

Submitted 14 May, 2024; originally announced May 2024.

Comments: 22 pages, 5 figures in text, 9 figures in supplementary, 1 table

Journal ref: ChemSusChem 2024

Investigation of BaTiO$_3$-NiO composite as compact Dielectric Resonator Antenna

Authors: Prithwiraj Ganguly, Vince Kumar, P. Maneesha, Saptarshi Ghosh, Somaditya Sen

Abstract: A compact dielectric resonator antenna has been fabricated on a microstrip transmission line for the purpose of C-band wireless communication using a ceramic material made out of a sintered mixture of BTO and NiO. The antenna parameters are optimized using Ansys HFSS software and verified experimentally. Ni replaces both Ba at A site and Ti at B site. Such a solid solution has a limit depending on… ▽ More A compact dielectric resonator antenna has been fabricated on a microstrip transmission line for the purpose of C-band wireless communication using a ceramic material made out of a sintered mixture of BTO and NiO. The antenna parameters are optimized using Ansys HFSS software and verified experimentally. Ni replaces both Ba at A site and Ti at B site. Such a solid solution has a limit depending on the amount of NiO provided during sintering. A complete study of the structural changes and the dielectric constant enables the correlation with the resonating property. All the samples retain the ferroelectric tetragonal P4mm phase with a nominal decrease in the c/a ratio. NiO incorporation in BTO decreases the sintering temperature and shows two types of morphology associated with BTO-like and NiO-like phases. It induces prominent reduction in the permittivity and loss tangent (<0.01) in the range 100Hz to 1MHz. These properties make these samples suitable for DRA application in the C-Band range [4-8 GHz]. Experimental and theoretical assessment using HFSS software yields a C-band signal at ~7.27 GHz. △ Less

Submitted 14 May, 2024; originally announced May 2024.

Parametrically encircled higher-order exceptional points in anti-parity-time symmetric optical microcavities

Authors: Dinesh Beniwal, Arnab Laha, Adam Miranowicz, Somnath Ghosh

Abstract: The fascinating realm of non-Hermitian physics with the interplay of parity (P) and time-reversal (T) symmetry has been witnessing immense attention in exploring unconventional physics at Exceptional Point (EP) singularities. Particularly, the physics of PT-symmetry, anti-PT (APT)-symmetry, and the emergence of EPs have ignited fervor in photonics. Beyond the conventional relation between EP and P… ▽ More The fascinating realm of non-Hermitian physics with the interplay of parity (P) and time-reversal (T) symmetry has been witnessing immense attention in exploring unconventional physics at Exceptional Point (EP) singularities. Particularly, the physics of PT-symmetry, anti-PT (APT)-symmetry, and the emergence of EPs have ignited fervor in photonics. Beyond the conventional relation between EP and PT-symmetric phase transitions, this study delves into hosting higher-order EPs in a specially designed APT-symmetric Fabry-Pérot-type microcavity. We unveil the captivating physics of the parametric encirclement schemes to explore the branch-point behaviors of EPs up to order three in terms of successive state-flipping, while optimizing the designed cavity under APT-symmetric constraints. The insights from our findings are poised to boost research in optical metamaterials, meeting the demands of APT-symmetry and paving the way for a novel class of photonic devices. △ Less

Submitted 16 May, 2024; v1 submitted 14 May, 2024; originally announced May 2024.

Comments: 6 pages, 3 figures

Anomalous Quantum Propagation of Microcavity Exciton Polaritons

Authors: Tian Lingyu, Yutian Peng, Qihua Xiong, Sanjib Ghosh

Abstract: Here, we explore the quantum propagation of exciton polaritons in semiconductor microcavities, exhibiting intriguing effects such as interactions, decay, and disorder scatterings. Our investigation uncovers anomalies in their quantum propagation, deviating from predictions based on existing theories. By applying scaling theory, we elucidate the true nature of exciton polariton propagation, unveili… ▽ More Here, we explore the quantum propagation of exciton polaritons in semiconductor microcavities, exhibiting intriguing effects such as interactions, decay, and disorder scatterings. Our investigation uncovers anomalies in their quantum propagation, deviating from predictions based on existing theories. By applying scaling theory, we elucidate the true nature of exciton polariton propagation, unveiling a localization phase that characteristically differs from Anderson localization. Our numerical results agree with the self-consistent theory developed for exciton polariton condensates, incorporating non-linearity and finite lifetime. △ Less

Submitted 28 April, 2024; originally announced April 2024.

Comments: 14 pages, 4 figures

Wavelength-accurate and wafer-scale process for nonlinear frequency mixers in thin-film lithium niobate

Authors: C. J. Xin, Shengyuan Lu, Jiayu Yang, Amirhassan Shams-Ansari, Boris Desiatov, Letícia S. Magalhães, Soumya S. Ghosh, Erin McGee, Dylan Renaud, Nicholas Achuthan, Arseniy Zvyagintsev, David Barton III, Neil Sinclair, Marko Lončar

Abstract: Recent advancements in thin-film lithium niobate (TFLN) photonics have led to a new generation of high-performance electro-optic devices, including modulators, frequency combs, and microwave-to-optical transducers. However, the broader adoption of TFLN-based devices that rely on all-optical nonlinearities have been limited by the sensitivity of quasi-phase matching (QPM), realized via ferroelectri… ▽ More Recent advancements in thin-film lithium niobate (TFLN) photonics have led to a new generation of high-performance electro-optic devices, including modulators, frequency combs, and microwave-to-optical transducers. However, the broader adoption of TFLN-based devices that rely on all-optical nonlinearities have been limited by the sensitivity of quasi-phase matching (QPM), realized via ferroelectric poling, to fabrication tolerances. Here, we propose a scalable fabrication process aimed at improving the wavelength-accuracy of optical frequency mixers in TFLN. In contrast to the conventional pole-before-etch approach, we first define the waveguide in TFLN and then perform ferroelectric poling. This sequence allows for precise metrology before and after waveguide definition to fully capture the geometry imperfections. Systematic errors can also be calibrated by measuring a subset of devices to fine-tune the QPM design for remaining devices on the wafer. Using this method, we fabricated a large number of second harmonic generation devices aimed at generating 737 nm light, with 73% operating within 5 nm of the target wavelength. Furthermore, we also demonstrate thermo-optic tuning and trimming of the devices via cladding deposition, with the former bringing ~96% of tested devices to the target wavelength. Our technique enables the rapid growth of integrated quantum frequency converters, photon pair sources, and optical parametric amplifiers, thus facilitating the integration of TFLN-based nonlinear frequency mixers into more complex and functional photonic systems. △ Less

Submitted 18 April, 2024; originally announced April 2024.

How COVID-19 has Impacted the Anti-Vaccine Discourse: A Large-Scale Twitter Study Spanning Pre-COVID and Post-COVID Era

Authors: Soham Poddar, Rajdeep Mukherjee, Subhendu Khatuya, Niloy Ganguly, Saptarshi Ghosh

Abstract: The debate around vaccines has been going on for decades, but the COVID-19 pandemic showed how crucial it is to understand and mitigate anti-vaccine sentiments. While the pandemic may be over, it is still important to understand how the pandemic affected the anti-vaccine discourse, and whether the arguments against non-COVID vaccines (e.g., Flu, MMR, IPV, HPV vaccines) have also changed due to the… ▽ More The debate around vaccines has been going on for decades, but the COVID-19 pandemic showed how crucial it is to understand and mitigate anti-vaccine sentiments. While the pandemic may be over, it is still important to understand how the pandemic affected the anti-vaccine discourse, and whether the arguments against non-COVID vaccines (e.g., Flu, MMR, IPV, HPV vaccines) have also changed due to the pandemic. This study attempts to answer these questions through a large-scale study of anti-vaccine posts on Twitter. Almost all prior works that utilized social media to understand anti-vaccine opinions considered only the three broad stances of Anti-Vax, Pro-Vax, and Neutral. There has not been any effort to identify the specific reasons/concerns behind the anti-vax sentiments (e.g., side-effects, conspiracy theories, political reasons) on social media at scale. In this work, we propose two novel methods for classifying tweets into 11 different anti-vax concerns -- a discriminative approach (entailment-based) and a generative approach (based on instruction tuning of LLMs) -- which outperform several strong baselines. We then apply this classifier on anti-vaccine tweets posted over a 5-year period (Jan 2018 - Jan 2023) to understand how the COVID-19 pandemic has impacted the anti-vaccine concerns among the masses. We find that the pandemic has made the anti-vaccine discourse far more complex than in the pre-COVID times, and increased the variety of concerns being voiced. Alarmingly, we find that concerns about COVID vaccines are now being projected onto the non-COVID vaccines, thus making more people hesitant in taking vaccines in the post-COVID era. △ Less

Submitted 2 April, 2024; originally announced April 2024.

Comments: This work has been accepted to appear at the 18th International AAAI Conference on Web and Social Media (ICWSM), 2024

Enhanced extracellular matrix remodeling due to embedded spheroid fluidization

Authors: Tao Zhang, Shabeeb Ameen, Sounok Ghosh, Kyungeun Kim, Minh Thanh, Alison E. Patteson, Mingming Wu, J. M. Schwarz

Abstract: Tumor spheroids are in vitro three-dimensional, cellular collectives consisting of cancerous cells. Embedding these spheroids in an in vitro fibrous environment, such as a collagen network, to mimic the extracellular matrix (ECM) provides an essential platform to quantitatively investigate the biophysical mechanisms leading to tumor invasion of the ECM. To understand the mechanical interplay betwe… ▽ More Tumor spheroids are in vitro three-dimensional, cellular collectives consisting of cancerous cells. Embedding these spheroids in an in vitro fibrous environment, such as a collagen network, to mimic the extracellular matrix (ECM) provides an essential platform to quantitatively investigate the biophysical mechanisms leading to tumor invasion of the ECM. To understand the mechanical interplay between tumor spheroids and the ECM, we computationally construct and study a three-dimensional vertex model for a tumor spheroid that is mechanically coupled to a cross-linked network of fibers. In such a vertex model, cells are represented as deformable polyhedrons that share faces. Some fraction of the boundary faces of the tumor spheroid contain linker springs connecting the center of the boundary face to the nearest node in the fiber network. As these linker springs actively contract, the fiber network remodels. By toggling between fluid-like and solid-like spheroids via changing the dimensionless cell shape index, we find that the spheroid rheology affects the remodeling of the fiber network. More precisely, fluid-like spheroids displace the fiber network more on average near the vicinity of the spheroid than solid-like spheroids. We also find more densification of the fiber network near the spheroid for the fluid-like spheroids. These spheroid rheology-dependent effects are the result of cellular motility due to active cellular rearrangements that emerge over time in the fluid-like spheroids to generate spheroid shape fluctuations. Our results uncover intricate morphological-mechanical interplay between an embedded spheroid and its surrounding fiber network with both spheroid contractile strength and spheroid shape fluctuations playing important roles in the pre-invasion stages of tumor invasion. △ Less

Submitted 25 March, 2024; originally announced March 2024.

Comments: 19 pages, 12 figures, 7 SI figures

Offline tagging of radon-induced backgrounds in XENON1T and applicability to other liquid xenon detectors

Authors: E. Aprile, J. Aalbers, K. Abe, S. Ahmed Maouloud, L. Althueser, B. Andrieu, E. Angelino, J. R. Angevaare, D. Antón Martin, F. Arneodo, L. Baudis, A. L. Baxter, M. Bazyk, L. Bellagamba, R. Biondi, A. Bismark, E. J. Brookes, A. Brown, G. Bruno, R. Budnik, T. K. Bui, J. M. R. Cardoso, A. P. Cimental Chavez, A. P. Colijn, J. Conrad , et al. (142 additional authors not shown)

Abstract: This paper details the first application of a software tagging algorithm to reduce radon-induced backgrounds in liquid noble element time projection chambers, such as XENON1T and XENONnT. The convection velocity field in XENON1T was mapped out using $^{222}\text{Rn}$ and $^{218}\text{Po}$ events, and the root-mean-square convection speed was measured to be $0.30 \pm 0.01$ cm/s. Given this velocity… ▽ More This paper details the first application of a software tagging algorithm to reduce radon-induced backgrounds in liquid noble element time projection chambers, such as XENON1T and XENONnT. The convection velocity field in XENON1T was mapped out using $^{222}\text{Rn}$ and $^{218}\text{Po}$ events, and the root-mean-square convection speed was measured to be $0.30 \pm 0.01$ cm/s. Given this velocity field, $^{214}\text{Pb}$ background events can be tagged when they are followed by $^{214}\text{Bi}$ and $^{214}\text{Po}$ decays, or preceded by $^{218}\text{Po}$ decays. This was achieved by evolving a point cloud in the direction of a measured convection velocity field, and searching for $^{214}\text{Bi}$ and $^{214}\text{Po}$ decays or $^{218}\text{Po}$ decays within a volume defined by the point cloud. In XENON1T, this tagging system achieved a $^{214}\text{Pb}$ background reduction of $6.2^{+0.4}_{-0.9}\%$ with an exposure loss of $1.8\pm 0.2 \%$, despite the timescales of convection being smaller than the relevant decay times. We show that the performance can be improved in XENONnT, and that the performance of such a software-tagging approach can be expected to be further improved in a diffusion-limited scenario. Finally, a similar method might be useful to tag the cosmogenic $^{137}\text{Xe}$ background, which is relevant to the search for neutrinoless double-beta decay. △ Less

Submitted 19 June, 2024; v1 submitted 21 March, 2024; originally announced March 2024.

Comments: 17 pages, 19 figures

Impact of Diffusion on synchronization pattern of epidemics in nonidentical metapopulation networks

Authors: Anika Roy, Ujjwal Shekhar, Aditi Bose, Subrata Ghosh, Santosh Nannuru, Syamal Kumar Dana, Chittaranjan Hens

Abstract: In a prior study, a novel deterministic compartmental model known as the SEIHRK model was introduced, shedding light on the pivotal role of test kits as an intervention strategy for mitigating epidemics. Particularly in heterogeneous networks, it was empirically demonstrated that strategically distributing a limited number of test kits among nodes with higher degrees substantially diminishes the o… ▽ More In a prior study, a novel deterministic compartmental model known as the SEIHRK model was introduced, shedding light on the pivotal role of test kits as an intervention strategy for mitigating epidemics. Particularly in heterogeneous networks, it was empirically demonstrated that strategically distributing a limited number of test kits among nodes with higher degrees substantially diminishes the outbreak size. The network's dynamics were explored under varying values of infection rate. In this research, we expand upon these findings to investigate the influence of migration on infection dynamics within distinct communities of the network. Notably, we observe that nodes equipped with test kits and those without tend to segregate into two separate clusters when coupling strength is low, but beyond a critical threshold coupling coefficient, they coalesce into a unified cluster. Building on this clustering phenomenon, we develop a reduced equation model and rigorously validate its accuracy through comprehensive simulations. We show that this property is observed in both complete and random graphs. △ Less

Submitted 1 March, 2024; originally announced March 2024.

Comments: 8 figures, 15 pages including citations

Controlling polymer translocation with crowded medium and polymer length asymmetry

Authors: Vrinda Garg, Rejoy Mathew, Riyan Ibrahim, Kulveer Singh, Surya K. Ghosh

Abstract: Polymer translocation in crowded environments is a ubiquitous phenomenon in biological systems. We studied polymer translocation through a pore in free, one-sided (asymmetric), and two-sided (symmetric) crowded environments. Extensive Langevin dynamics simulation is employed to model the dynamics of the flexible polymer and crowding particles. We studied how crowding size and packing fraction play… ▽ More Polymer translocation in crowded environments is a ubiquitous phenomenon in biological systems. We studied polymer translocation through a pore in free, one-sided (asymmetric), and two-sided (symmetric) crowded environments. Extensive Langevin dynamics simulation is employed to model the dynamics of the flexible polymer and crowding particles. We studied how crowding size and packing fraction play a crucial role in the translocation process. After determining the standard scaling properties of the translocation probability, time, and MSD, we observed that the translocation rate and bead velocities are location-dependent as we move along the polymer backbone, even in a crowd-free environment. Counter-intuitively, translocation rate and bead velocities showed the opposite behavior; for example, middle monomers near the pore exhibit maximum bead velocity and minimum translocation rate. Free energy calculation for asymmetrically placed polymer indicates there exists a critical number of segments that make the polymer to prefer the receiver side for translocation. For one-sided crowding, we have identified a critical crowding size above which there exists a non-zero probability to translocate into the crowding side instead of the free side. Moreover, we have observed that shifting the polymer towards the crowded side compensates for one-sided crowding, yielding an equal probability akin to a crowder-free system. Under two-sided crowding, the mechanism of how a slight variation in crowder size and packing fraction can force a polymer to switch its translocation direction is proposed, which has not been explored before. Using this control we achieved an equal translocation probability like a crowd-free scenario. These conspicuous yet counter-intuitive phenomena are rationalized by simple theoretical arguments based on osmotic pressure and radial entropic forces. △ Less

Submitted 29 February, 2024; originally announced February 2024.

Fourier Electron Optics with Massless Dirac Fermions Scattered by Quantum Dot Lattice

Authors: Partha Sarathi Banerjee, Rahul Marathe, Sankalpa Ghosh

Abstract: The field of electron optics exploits the analogy between the movement of electrons or charged quasiparticles, primarily in two-dimensional materials subjected to electric and magnetic (EM) fields and the propagation of electromagnetic waves in a dielectric medium with varied refractive index. We significantly extend this analogy by introducing Fourier electron optics (FEO) with massless Dirac fer… ▽ More The field of electron optics exploits the analogy between the movement of electrons or charged quasiparticles, primarily in two-dimensional materials subjected to electric and magnetic (EM) fields and the propagation of electromagnetic waves in a dielectric medium with varied refractive index. We significantly extend this analogy by introducing Fourier electron optics (FEO) with massless Dirac fermions (MDF), namely the charge carriers of single-layer graphene under ambient conditions, by considering their scattering from a two-dimensional quantum dot lattice (TDQDL) treated within Lippmann-Schwinger formalism. By considering the scattering of MDF from TDQDL with a cavity, as well as the moiré pattern of twisted TDQDLs, we establish an electronic analogue of Babinet's principle in optics. Exploiting the similarity of the resulting differential scattering cross-section with the Fraunhofer diffraction pattern, we construct a dictionary for such FEO. Subsequently, we evaluate the resistivity of such scattered MDF using the Boltzmann approach as a function of the angle made between the direction of propagation of these charge-carriers and the symmetry axis of the dot-lattice, and Fourier analyze them to show that the spatial frequency associated with the angle-resolved resistivity gets filtered according to the structural changes in the dot lattice, indicating wider applicability of FEO of MDF. △ Less

Submitted 17 February, 2024; originally announced February 2024.

Comments: Nine latex pages with four figures. Supplementary information is also available in the same url

Rational Materials Design for In Operando Electropolymerization of Evolvable Organic Electrochemical Transistors

Authors: J. Y. Gerasimov, A. Halder, A. H. Mousa, S. Ghosh, P. C. Harikesh, T. Abrahamsson, D. Bliman, J. Strandberg, M. Massetti, I. Zozoulenko, D. T. Simon, M. Berggren, R. Olsson, S. Fabiano

Abstract: Organic electrochemical transistors formed by in operando electropolymerization of the semiconducting channel are increasingly becoming recognized as a simple and effective implementation of synapses in neuromorphic hardware. However, very few studies have reported the requirements that must be met to ensure that the polymer spreads along the substrate to form a functional conducting channel. The… ▽ More Organic electrochemical transistors formed by in operando electropolymerization of the semiconducting channel are increasingly becoming recognized as a simple and effective implementation of synapses in neuromorphic hardware. However, very few studies have reported the requirements that must be met to ensure that the polymer spreads along the substrate to form a functional conducting channel. The nature of the interface between the substrate and various monomer precursors of conducting polymers through molecular dynamics simulations is investigated, showing that monomer adsorption to the substrate produces an increase in the effective monomer concentration at the surface. By evaluating combinatorial couples of monomers baring various sidechains with differently functionalized substrates, it is shown that the interactions between the substrate and the monomer precursor control the lateral growth of a polymer film along an inert substrate. This effect has implications for fabricating synaptic systems on inexpensive, flexible substrates. △ Less

Submitted 18 January, 2024; originally announced January 2024.

Site-Specific Plan-view (S)TEM Sample Preparation from Thin Films using a Dual-Beam FIB-SEM

Authors: Supriya Ghosh, Fengdeng Liu, Sreejith Nair, Bharat Jalan, K. Andre Mkhoyan

Abstract: Plan-view transmission electron microscopy (TEM) samples are key to understand the atomic structure and associated properties of materials along their growth orientation, especially for thin films that are stain-engineered onto different substrates for property tuning. In this work, we present a method to prepare high-quality plan-view samples for analytical STEM study from thin-films using a dual… ▽ More Plan-view transmission electron microscopy (TEM) samples are key to understand the atomic structure and associated properties of materials along their growth orientation, especially for thin films that are stain-engineered onto different substrates for property tuning. In this work, we present a method to prepare high-quality plan-view samples for analytical STEM study from thin-films using a dual-beam focused ion beam scanning electron microscope (FIB-SEM) system. The samples were prepared from thin films of perovskite oxides and metal oxides ranging from 20-80 nm thicknesses, grown on different substrates using molecular beam epitaxy. A site-specific sample preparation from the area of interest is described, which includes sample attachment and thinning techniques to minimize damage to the final TEM samples. While optimized for the thin film-like geometry, this method can be extended to other site-specific plan-view samples from bulk materials. Aberration-corrected scanning (S)TEM was used to access the quality of the thin film in each sample. This enabled direct visualization of line defects in perovskite BaSnO3 and Ir particle formation and texturing in IrO2 films. △ Less

Submitted 4 January, 2024; originally announced January 2024.

Parametric Frequency Divider based Ising Machines

Authors: Nicolas Casilli, Tahmid Kaisar, Luca Colombo, Siddhartha Ghosh, Philip X. -L. Feng, Cristian Cassella

Abstract: We report on a new class of Ising Machines (IMs) that rely on coupled parametric frequency dividers (PFDs) as macroscopic artificial spins. Unlike the IM counterparts based on subharmonic injection locking (SHIL), PFD IMs do not require strong injected continuous wave signals or applied DC voltages. Therefore, they show a significantly lower power consumption per spin compared to SHIL based IMs, m… ▽ More We report on a new class of Ising Machines (IMs) that rely on coupled parametric frequency dividers (PFDs) as macroscopic artificial spins. Unlike the IM counterparts based on subharmonic injection locking (SHIL), PFD IMs do not require strong injected continuous wave signals or applied DC voltages. Therefore, they show a significantly lower power consumption per spin compared to SHIL based IMs, making it feasible to accurately solve large scale combinatorial optimization problems (COPs) that are hard or even impossible to solve by using the current von Neumann computing architectures. Furthermore, using high quality (Q) factor resonators in the PFD design makes PFD IMs able to exhibit a nanoWatt level power per spin. Also, it remarkably allows a speed up of the phase synchronization among the PFDs, resulting in shorter time to solution and lower energy to solution despite the resonators' longer relaxation time. As a proof of concept, a 4 node PFD IM has been demonstrated. This IM correctly solves a set of MaxCut problems while consuming just 600 nanoWatts per spin. This power consumption is two orders of magnitude lower than the power per spin of state of the art SHIL based IMs operating at the same frequency. △ Less

Submitted 26 February, 2024; v1 submitted 13 December, 2023; originally announced December 2023.

Room-temperature continuous-wave pumped exciton polariton condensation in a perovskite microcavity

Authors: Jiepeng Song, Sanjib Ghosh, Xinyi Deng, Qiuyu Shang, Xinfeng Liu, Yubin Wang, Xiaoyue Gao, Wenkai Yang, Xianjin Wang, Qing Zhao, Kebin Shi, Peng Gao, Qihua Xiong, Qing Zhang

Abstract: Microcavity exciton polaritons (polaritons) as part-light part-matter quasiparticles, garner significant attention for non-equilibrium Bose-Einstein condensation at elevated temperatures. Recently, halide perovskites have emerged as promising room-temperature polaritonic platforms thanks to their large exciton binding energies and superior optical properties. However, currently, inducing room-temp… ▽ More Microcavity exciton polaritons (polaritons) as part-light part-matter quasiparticles, garner significant attention for non-equilibrium Bose-Einstein condensation at elevated temperatures. Recently, halide perovskites have emerged as promising room-temperature polaritonic platforms thanks to their large exciton binding energies and superior optical properties. However, currently, inducing room-temperature non-equilibrium polariton condensation in perovskite microcavities requires optical pulsed excitations with high excitation densities. Herein, we demonstrate continuous-wave optically pumped polariton condensation with an exceptionally low threshold of ~0.6 W cm-2 and a narrow linewidth of ~1 meV. Polariton condensation is unambiguously demonstrated by characterizing the nonlinear behavior and coherence properties. We also identify a microscopic mechanism involving the potential landscape in the perovskite microcavity, where numerous discretized energy levels arising from the hybridization of adjacent potential minima enhance the polariton relaxation, facilitating polariton condensate formation. Our findings lay the foundation for the next-generation energy-efficient polaritonic devices operating at room temperature. △ Less

Submitted 14 February, 2024; v1 submitted 21 November, 2023; originally announced November 2023.

Comments: 16 pages, 4 figures

Dynamics of Particle-laden Turbulent Suspensions: Effect of particle roughness

Authors: S. Ghosh, P S Goswami, V. Kumaran

Abstract: The Fluctuating Force Fluctuating Torque (F3T) model is developed and evaluated for the dynamics of a turbulent particle-gas suspension of rough spherical particles in a turbulent Couette flow in the limit where the viscous relaxation time of the particles and the time between collisions are much larger than the integral time for the fluid turbulence. The fluid force/torque exerted on the particle… ▽ More The Fluctuating Force Fluctuating Torque (F3T) model is developed and evaluated for the dynamics of a turbulent particle-gas suspension of rough spherical particles in a turbulent Couette flow in the limit where the viscous relaxation time of the particles and the time between collisions are much larger than the integral time for the fluid turbulence. The fluid force/torque exerted on the particles comprise a steady part due to the difference in the particle velocity/angular velocity and the fluid mean velocity/rotation rate, and a fluctuating part due to the turbulent velocity/vorticity fluctuations. The fluctuations are modeled as Gaussian white noise whose variance is determined from the fluid velocity and vorticity fluctuations. The smooth and rough inelastic collision models are considered for particle-particle and particle-wall collisions. The results show that inclusion of roughness is important for accurately predicting the particle dynamics; the second moments of the velocity fluctuations for rough particles are higher than those for smooth particles by a factor of 2-10, while the second moments of the angular velocity fluctuations are higher by 1-2 orders of magnitude. The F3T model quantitatively predicts the number density, mean and root mean square velocity and angular velocity profiles, and the distribution functions for the particle velocity and angular velocity, even though a Gaussian model is used for the highly non-Gaussian distributions for the force and torque fluctuations. △ Less

Submitted 16 November, 2023; originally announced November 2023.

Supercontinuum amplification by Kerr instability

Authors: Sagnik Ghosh, Nathan G. Drouillard, TJ Hammond

Abstract: The versatility of optical parametric amplifiers make them excellent sources for next-generation ultrashort strong-field physics experiments, however phase matching considerations limit the available bandwidth. We demonstrate supercontinuum amplification in a four-wave optical parametric amplifier by Kerr instability. Experimentally, we amplify spectra that span nearly an octave without spatial ch… ▽ More The versatility of optical parametric amplifiers make them excellent sources for next-generation ultrashort strong-field physics experiments, however phase matching considerations limit the available bandwidth. We demonstrate supercontinuum amplification in a four-wave optical parametric amplifier by Kerr instability. Experimentally, we amplify spectra that span nearly an octave without spatial chirp, with two-cycle transform limited pulse duration. We also theoretically explore regimes that demonstrate single-cycle amplification in the near infrared. △ Less

Submitted 14 November, 2023; originally announced November 2023.

Single-stage few-cycle pulse amplification

Authors: Sagnik Ghosh, Nathan G. Drouillard, TJ Hammond

Abstract: Kerr instability can be exploited to amplify visible, near-, and mid-infrared ultrashort pulses. We use the results of Kerr instability amplification theory to inform our simulations amplifying few-cycle pulses. We show that the amplification angle-dependence is simplified to the phase matching condition of four-wave mixing when the intense pump is considered. Seeding with few-cycle pulses near th… ▽ More Kerr instability can be exploited to amplify visible, near-, and mid-infrared ultrashort pulses. We use the results of Kerr instability amplification theory to inform our simulations amplifying few-cycle pulses. We show that the amplification angle-dependence is simplified to the phase matching condition of four-wave mixing when the intense pump is considered. Seeding with few-cycle pulses near the pump leads to broadband amplification without spatial chirp, while longer pulses undergo compression through amplification. Pumping in the mid-IR leads to multi-octave spanning amplified pulses with single-cycle duration not previously predicted. We discuss limitations of the amplification process and optimizing pump and seed parameters to maximize amplification. △ Less

Submitted 22 December, 2023; v1 submitted 14 November, 2023; originally announced November 2023.

Effect of Andreev Processes on the Goos-Hänchen (GH) shift in the Graphene-Superconductor-Graphene (GSG) junctions

Authors: Shahrukh Salim, Rahul Marathe, Sankalpa Ghosh

Abstract: In this article, we study the transport properties of Graphene-Superconductor-Graphene (GSG) heterojunction where the superconducting region is created in the middle of a graphene sheet, as contrasted to widely studied transport properties through a Superconductor-Graphene-Superconductor (SGS) type of Josephson junction. We particularly analyse in detail the Goos-Hänchen shift of the electron and… ▽ More In this article, we study the transport properties of Graphene-Superconductor-Graphene (GSG) heterojunction where the superconducting region is created in the middle of a graphene sheet, as contrasted to widely studied transport properties through a Superconductor-Graphene-Superconductor (SGS) type of Josephson junction. We particularly analyse in detail the Goos-Hänchen shift of the electron and the hole at the GS interface in such a junction, due to normal as well as Andreev reflection, using a transfer matrix-based approach. Additionally, we evaluate the normalised differential conductance as a function of bias voltage that characterises the transport through such junction and point out how they are influenced by Andreev and normal reflection. In the subsequent parts of the article we demonstrate how the GH shift for both electron and hole changes with the width of the superconducting region. The behavior of the differential conductance in such junctions as a function of the bias voltage in the region, dominated by Andreev and normal reflection, is also presented and analysed. △ Less

Submitted 4 November, 2023; originally announced November 2023.

Comments: 15 pages, 11 figures, Accepted in Physica E (2023)

Journal ref: Physica E, 156, 115858 (2024)

Rydberg-atom-based single-photon detection for haloscope axion searches

Authors: Eleanor Graham, Sumita Ghosh, Yuqi Zhu, Xiran Bai, Sidney B. Cahn, Elsa Durcan, Michael J. Jewell, Danielle H. Speller, Sabrina M. Zacarias, Laura T. Zhou, Reina H. Maruyama

Abstract: We propose a Rydberg-atom-based single-photon detector for signal readout in dark matter haloscope experiments between 40 $μ$eV and 200 $μ$eV (10 GHz and 50 GHz). At these frequencies, standard haloscope readout using linear amplifiers is limited by quantum measurement noise, which can be avoided by using a single-photon detector. Our single-photon detection scheme can offer scan rate enhancements… ▽ More We propose a Rydberg-atom-based single-photon detector for signal readout in dark matter haloscope experiments between 40 $μ$eV and 200 $μ$eV (10 GHz and 50 GHz). At these frequencies, standard haloscope readout using linear amplifiers is limited by quantum measurement noise, which can be avoided by using a single-photon detector. Our single-photon detection scheme can offer scan rate enhancements up to a factor of $10^4$ over traditional linear amplifier readout, and is compatible with many different haloscope cavities. We identify multiple haloscope designs that could use our Rydberg-atom-based single-photon detector to search for QCD axions with masses above 40 $μ$eV (10 GHz), currently a minimally explored parameter space. △ Less

Submitted 10 November, 2023; v1 submitted 23 October, 2023; originally announced October 2023.

Comments: 15 pages, 8 figures

Reducing Uncertainty in Sea-level Rise Prediction: A Spatial-variability-aware Approach

Authors: Subhankar Ghosh, Shuai An, Arun Sharma, Jayant Gupta, Shashi Shekhar, Aneesh Subramanian

Abstract: Given multi-model ensemble climate projections, the goal is to accurately and reliably predict future sea-level rise while lowering the uncertainty. This problem is important because sea-level rise affects millions of people in coastal communities and beyond due to climate change's impacts on polar ice sheets and the ocean. This problem is challenging due to spatial variability and unknowns such a… ▽ More Given multi-model ensemble climate projections, the goal is to accurately and reliably predict future sea-level rise while lowering the uncertainty. This problem is important because sea-level rise affects millions of people in coastal communities and beyond due to climate change's impacts on polar ice sheets and the ocean. This problem is challenging due to spatial variability and unknowns such as possible tipping points (e.g., collapse of Greenland or West Antarctic ice-shelf), climate feedback loops (e.g., clouds, permafrost thawing), future policy decisions, and human actions. Most existing climate modeling approaches use the same set of weights globally, during either regression or deep learning to combine different climate projections. Such approaches are inadequate when different regions require different weighting schemes for accurate and reliable sea-level rise predictions. This paper proposes a zonal regression model which addresses spatial variability and model inter-dependency. Experimental results show more reliable predictions using the weights learned via this approach on a regional scale. △ Less

Submitted 18 October, 2023; originally announced October 2023.

Comments: 6 pages, 5 figures, I-GUIDE 2023 conference

ACM Class: J.2; I.2.m; I.2.6; I.2.1; I.2

Inhomogeneous Polarization Transformation Reveals PT-Transition in non-Hermitian Optical Beam Shift

Authors: Niladri Modak, Swain Ashutosh, Shyamal Guchhait, Sayan Ghosh, Ritwik Dhara, Jeeban Kumar Nayak, Sourin Das, Nirmalya Ghosh

Abstract: Despite its non-Hermitian nature, the transverse optical beam shift exhibits both real eigenvalues and non-orthogonal eigenstates. To explore this unexpected similarity to typical PT (parity-time)-symmetric systems, we first categorize the entire parametric regime of optical beam shifts into Hermitian, PT-unbroken, and PT-broken phases. Besides experimentally unveiling the PT-broken regime, crucia… ▽ More Despite its non-Hermitian nature, the transverse optical beam shift exhibits both real eigenvalues and non-orthogonal eigenstates. To explore this unexpected similarity to typical PT (parity-time)-symmetric systems, we first categorize the entire parametric regime of optical beam shifts into Hermitian, PT-unbroken, and PT-broken phases. Besides experimentally unveiling the PT-broken regime, crucially, we illustrate that the observed PT-transition is rooted in the momentum-domain inhomogeneous polarization transformation of the beam. The correspondence with a typical non-Hermitian photonic system is further established. Our work not only resolves a longstanding fundamental issue in the field of optical beam shift but also puts forward the notion of novel non-Hermitian spin-orbit photonics: a new direction to study non-Hermitian physics through the optical beam shifts. △ Less

Submitted 29 January, 2024; v1 submitted 22 October, 2023; originally announced October 2023.

Single-molecule motion control

Authors: Divyam Neer Verma, KV Chinmaya, Jan Heck, G Mohan Rao, Sonia Contera, Moumita Ghosh, Siddharth Ghosh

Abstract: Achieving dynamic manipulation and control of single molecules at high spatio-temporal resolution is pivotal for advancing atomic-scale computing and nanorobotics. However, this endeavour is critically challenged by complex nature of atomic and molecular interactions, high-dimensional characteristics of nanoscale systems, and scarcity of experimental data. Here, we present a toy model for controll… ▽ More Achieving dynamic manipulation and control of single molecules at high spatio-temporal resolution is pivotal for advancing atomic-scale computing and nanorobotics. However, this endeavour is critically challenged by complex nature of atomic and molecular interactions, high-dimensional characteristics of nanoscale systems, and scarcity of experimental data. Here, we present a toy model for controlling single-molecule diffusion by harnessing electrostatic forces arising from elementary surface charges within a lattice structure, mimicking embedded charges on a surface. We investigate the interplay between quantum mechanics and electrostatic interactions in single molecule diffusion processes using a combination of state-dependent diffusion equations and Green's functions. We find that surface charge density critically influences diffusion coefficients, exhibiting linear scaling akin to Coulombic forces. We achieve accurate predictions of experimental diffusion constants and extending the observed range to values reaching up to 6000 $μ\text{m}^2\text{ms}^{-1}$ and 80000 $μ\text{m}^2\text{ms}^{-1}$. The molecular trajectories predicted by our model bear resemblance to planetary motion, particularly in their gravity-assisted acceleration-like behaviour. It holds transformative implications for nanorobotics, motion control at the nanoscale, and computing applications, particularly in the areas of molecular and quantum computing where the trapping of atoms and molecules is essential. Beyond the state-of-the-art optical lattice and scanning tunnelling microscopy for atomic/molecular manipulation, our findings give unambiguous advantage of precise control over single-molecule dynamics through quantum manipulation at the angstrom scale. △ Less

Submitted 17 June, 2024; v1 submitted 26 September, 2023; originally announced October 2023.

Improved charge storage capacity of supercapacitor electrodes by engineering surfaces: the case of Janus MXenes

Authors: Mandira Das, Subhradip Ghosh

Abstract: Surface Engineering in two-dimensional(2D) materials has turned out to be an useful technique to improve their functional properties. By designing Janus compounds MM$^{\prime}$C in MXene family of compounds M$_{2}$C where the two surfaces are constituted by two different transition metal M and M$^{\prime}$, we have explored their potentials as electrodes in a supercapacitor with acidic electrolyte… ▽ More Surface Engineering in two-dimensional(2D) materials has turned out to be an useful technique to improve their functional properties. By designing Janus compounds MM$^{\prime}$C in MXene family of compounds M$_{2}$C where the two surfaces are constituted by two different transition metal M and M$^{\prime}$, we have explored their potentials as electrodes in a supercapacitor with acidic electrolyte. Using Density functional Theory (DFT) \cite{dft} in conjunction with classical solvation model we have made an in depth analysis of the electrochemical parameters of three Janus MXenes, passivated by oxygen - NbVC, MnVC and CrMnC. Comparisons with the corresponding end point MXenes Nb$_{2}$C, V$_{2}$C, Mn$_{2}$C and Cr$_{2}$C are also made. We find that the surface redox activity enhances due to formation of Janus, improving the charge storage capacities of MXene electrodes significantly. Our analysis reveals that the improved functionality has its root in the variations in the charge state of one of the constituents in the Janus compound which, in turn, has its origin in the electronic structure changes due to the surface manipulation. Our work, which is the first on the electrochemical properties of Janus MXenes for supercapacitor applications, suggests the surface engineering by forming appropriate Janus compounds as a possible route to extract high power density in a MXene electrode-acidic electrolyte based energy storage devices. △ Less

Submitted 10 October, 2023; originally announced October 2023.

Signum phase mask differential microscopy

Authors: Jeeban Kumar Nayak, Niladri Modak, Sayan Ghosh, Nirmalya Ghosh

Abstract: We propose and experimentally demonstrate a differential microscopy method to obtain simultaneous amplitude, phase, and quantitative polarization gradient imaging in a single experimental embodiment. A full-field optical spatial differentiator is achieved in a relatively simple setup by placing a glass cover slip as a Signum phase mask in the Fourier plane of a standard 4-f imaging system and acco… ▽ More We propose and experimentally demonstrate a differential microscopy method to obtain simultaneous amplitude, phase, and quantitative polarization gradient imaging in a single experimental embodiment. A full-field optical spatial differentiator is achieved in a relatively simple setup by placing a glass cover slip as a Signum phase mask in the Fourier plane of a standard 4-f imaging system and accordingly named Signum phase mask differential microscopy. The longstanding requisite of polarized light to obtain the spatial differentiation of the field at the object plane is eliminated in our scheme and, hence, leads to the emergence of quantitative differential polarization contrast imaging by integrating polarization degree of freedom as an additional contrast agent in the framework of differential microscopy. Implementation of the proposed differential imaging scheme in high-resolution microscopy is experimentally demonstrated alongside its functionality for a broad wavelength range. Simultaneous acquisition of differential phase, amplitude, and polarization (anisotropy) gradient imaging in a rather elementary optical setup enables a low-cost multi-functional differential microscopy system that is anticipated to emerge as a revolutionary tool in label-free imaging and optical image processing. △ Less

Submitted 9 October, 2023; v1 submitted 5 October, 2023; originally announced October 2023.

Emergent reprogrammable mechanical memory in soft rods network via friction tuning

Authors: Harsh Jain, Shankar Ghosh

Abstract: We present emergent mechanical memory storage behavior in soft cellular materials. The cellular materials are a network of soft hyperelastic rods which store shape changes, specifically local indentation. This happens under an applied global compressive strain on the material. The material transits under strain from an elastic state (capable of `forgetting' any applied indentation after un-indenta… ▽ More We present emergent mechanical memory storage behavior in soft cellular materials. The cellular materials are a network of soft hyperelastic rods which store shape changes, specifically local indentation. This happens under an applied global compressive strain on the material. The material transits under strain from an elastic state (capable of `forgetting' any applied indentation after un-indentation) to plastic state (indefinitely storing the shape change due to indentation). The memory can be erased via removal of applied global strains and is therefore re-programmable. We characterise this behaviour experimentally and present a simple model that makes use of friction for understanding this behavior. △ Less

Submitted 2 October, 2023; originally announced October 2023.

Cell nucleus elastography with the adjoint-based inverse solver

Authors: Yue Mei, Xuan Feng, Yun Jin, Rongyao Kang, Xinyu Wang, Dongmei Zhao, Soham Ghosh, Corey P Neu, Stephane Avril

Abstract: Background and Objectives: The mechanics of the nucleus depends on cellular structures and architecture, and impact a number of diseases. Nuclear mechanics is yet rather complex due to heterogeneous distribution of dense heterochromatin and loose euchromatin domains, giving rise to spatially variable stiffness properties. Methods: In this study, we propose to use the adjoint-based inverse solver t… ▽ More Background and Objectives: The mechanics of the nucleus depends on cellular structures and architecture, and impact a number of diseases. Nuclear mechanics is yet rather complex due to heterogeneous distribution of dense heterochromatin and loose euchromatin domains, giving rise to spatially variable stiffness properties. Methods: In this study, we propose to use the adjoint-based inverse solver to identify for the first time the nonhomogeneous elastic property distribution of the nucleus. Inputs of the inverse solver are deformation fields measured with microscopic imaging in contracting cardiomyocytes. Results: The feasibility of the proposed method is first demonstrated using simulated data. Results indicate accurate identification of the assumed heterochromatin region, with a maximum relative error of less than 5%. We also investigate the influence of unknown Poisson's ratio on the reconstruction and find that variations of the Poisson's ratio in the range [0.3-0.5] result in uncertainties of less than 15% in the identified stiffness. Finally, we apply the inverse solver on actual deformation fields acquired within the nuclei of two cardiomyocytes. The obtained results are in good agreement with the density maps obtained from microscopy images. Conclusions: Overall, the proposed approach shows great potential for nuclear elastography, with promising value for emerging fields of mechanobiology and mechanogenetics. △ Less

Submitted 28 September, 2023; originally announced September 2023.

Journal ref: Computer Methods and Programs in Biomedicine, In press

Quantitative Analysis of Social Influence & Digital Piracy Contagion with Differential Equations on Networks

Authors: Dibyajyoti Mallick, Kumar Gaurav, Saumik Bhattacharya, Sayantari Ghosh

Abstract: Though the studies of social contagions are regularly borrowing network models to study the propagation of social influences and opinions to include social heterogeneity. Such studies provide valuable insights regarding these, but the social network structures cannot be well explored in their study. In this research, we methodically study the trends in online piracy with a continuous ODE approach… ▽ More Though the studies of social contagions are regularly borrowing network models to study the propagation of social influences and opinions to include social heterogeneity. Such studies provide valuable insights regarding these, but the social network structures cannot be well explored in their study. In this research, we methodically study the trends in online piracy with a continuous ODE approach and differential equations on graphs, to have a clear comparative view. We first formulate a compartmental model to mathematically study bifurcations and thresholds, and later move on with a network-based analysis to illustrate the proliferation of online piracy dynamic with an epidemiological approach over a social network. We figure out a solution for this online piracy problem by developing awareness among individuals by introducing media campaigns which could be a useful factor for the eradication and control of online piracy. Next, using degree-block approximation, network analysis has been performed to investigate the phenomena from a heterogeneous approach and to derive the threshold condition for the persistence of piracy in the population in a steady state. Based on the behavioral responses of individuals in a society due to the effect of media, we examine the system through the aid of realistic parameter selection to better understand the complexity of the dynamics and propose control strategies. △ Less

Submitted 27 September, 2023; originally announced September 2023.

Comments: 21 pages, 6 figures

Segregation on small rubble bodies due to impact-induced seismic shaking

Authors: Sohanjit Ghosh, Ishan Sharma, Deepak Dhingra

Abstract: We present a framework to study regolith segregation on rubble-pile asteroids (self-gravitating granular aggregates) due to seismic shaking induced by impacts sustained during their lifetimes. We first relate the amplitude and frequency of surface vibrations to the location and severity of an impact, and the rubble body's geometry and bulk properties. For clarity, the body is taken to be an ellips… ▽ More We present a framework to study regolith segregation on rubble-pile asteroids (self-gravitating granular aggregates) due to seismic shaking induced by impacts sustained during their lifetimes. We first relate the amplitude and frequency of surface vibrations to the location and severity of an impact, and the rubble body's geometry and bulk properties. For clarity, the body is taken to be an ellipsoid with size and spin close to that of Itokawa, although other asteroids are also easily incorporated. We then model the body's collisional history stochastically given the variability in the impact activity on an asteroid. Finally, we utilize discrete element simulations to investigate the regolith's response to impacts. In these simulations, in any sample collisional history, every time an impact occurs, a bin filled with a grain mixture and located at the region of interest on the asteroid is vibrated at that impact's associated amplitude and frequency. Utilizing this framework we find that impact-driven seismicity is sufficient to drive size segregation on small rubble-piles, but the segregation quality depends on several aspects, e.g. total impact energy supplied, placement of the region of interest, bulk wave speed, and seismic diffusivity. △ Less

Submitted 20 September, 2023; originally announced September 2023.

Graph Theory Applications in Advanced Geospatial Research

Authors: Surajit Ghosh, Archita Mallick, Anuva Chowdhury, Kounik De Sarkar

Abstract: Geospatial sciences include a wide range of applications, from environmental monitoring transportation to infrastructure planning, as well as location-based analysis and services. Graph theory algorithms in mathematics have emerged as indispensable tools in these domains due to their capability to model and analyse spatial relationships efficiently. This article explores the applications of graph… ▽ More Geospatial sciences include a wide range of applications, from environmental monitoring transportation to infrastructure planning, as well as location-based analysis and services. Graph theory algorithms in mathematics have emerged as indispensable tools in these domains due to their capability to model and analyse spatial relationships efficiently. This article explores the applications of graph theory algorithms in geospatial sciences, highlighting their role in network analysis, spatial connectivity, geographic information systems, and various other spatial problem-solving scenarios like digital twin. The article provides a comprehensive idea about graph theory's key concepts and algorithms that assist the geospatial modelling processes and insights into real-world geospatial challenges and opportunities. It lists the extensive research, innovative technologies and methodologies implemented in this domain. △ Less

Submitted 9 October, 2023; v1 submitted 6 September, 2023; originally announced September 2023.

Performance analysis of InAlN/GaN HEMT and optimization for high frequency applications

Authors: Jagori Raychaudhuri, Jayjit Mukherjee, Amit Malik, Sudhir Kumar, D. S. Rawal, Meena Mishra, Santanu Ghosh

Abstract: An InAlN/GaN HEMT device was studied using extensive temperature dependent DC IV measurements and CV measurements. Barrier traps in the InAlN layer were characterized using transient analysis. Forward gate current was modelled using analytical equations. RF performance of the device was also studied and device parameters were extracted following small signal equivalent circuit model. Extensive sim… ▽ More An InAlN/GaN HEMT device was studied using extensive temperature dependent DC IV measurements and CV measurements. Barrier traps in the InAlN layer were characterized using transient analysis. Forward gate current was modelled using analytical equations. RF performance of the device was also studied and device parameters were extracted following small signal equivalent circuit model. Extensive simulations in Silvaco TCAD were also carried out by varying stem height, gate length and incorporating back barrier to optimize the suitability of this device in Ku-band by reducing the detrimental Short Channel Effects (SCEs). In this paper a novel structure i.e., a short length T gate with recess, on thin GaN buffer to achieve high cut-off frequency (f$_T$) and high maximum oscillating frequency (f$_{max}$) apt for Ku-band applications is also proposed. △ Less

Submitted 5 September, 2023; originally announced September 2023.

Investigation of RF performance of Ku-band GaN HEMT device and an in-depth analysis of short channel effects

Authors: Jagori Raychaudhuri, Jayjit Mukherjee, Sudhir Kumar, D. S. Rawal, Meena Mishra, Santanu Ghosh

Abstract: In this paper, we have characterized an AlGaN/GaN High Electron Mobility Transistor (HEMT) with a short gate length (Lg $\approx$ 0.15$μ$m). We have studied the effect of short gate length on the small signal parameters, linearity parameters and gm-gd ratio in GaN HEMT devices. To understand how scaling results in the variation of the above-mentioned parameters a comparative study with higher gate… ▽ More In this paper, we have characterized an AlGaN/GaN High Electron Mobility Transistor (HEMT) with a short gate length (Lg $\approx$ 0.15$μ$m). We have studied the effect of short gate length on the small signal parameters, linearity parameters and gm-gd ratio in GaN HEMT devices. To understand how scaling results in the variation of the above-mentioned parameters a comparative study with higher gate length devices on similar heterostructure is also presented here. We have scaled down the gate length but the barrier thickness(t$_{bar}$) remained same which affects the aspect ratio (L$_{g}$/t$_{bar}$) of the device and its inseparable consequences are the prominent short channel effects (SCEs) barring the optimum output performance of the device. These interesting phenomena were studied in detail and explored over a temperature range of -40$^\circ$C to 80$^\circ$C. To the best of our knowledge this paper explores temperature dependence of SCEs of GaN HEMT for the first time. With an approach to reduce the impact of SCEs a simulation study in Silvaco TCAD was carried out and it is observed that a recessed gate structure on conventional heterostructure successfully reduces SCEs and improves RF performance of the device. This work gives an overall view of gate length scaling on conventional AlGaN/GaN HEMTs. △ Less

Submitted 9 April, 2024; v1 submitted 5 September, 2023; originally announced September 2023.

Journal ref: Physica Scripta, Vol. 99, No. 4, 2024

Coherence as an indicator to discern electromagnetically induced transparency and Autler-Townes splitting

Authors: Arif Warsi Laskar, Pratik Adhikary, Niharika Singh, Saikat Ghosh

Abstract: Electromagnetically induced transparency (EIT) and Autler-Townes splitting (ATS) are generally characterized and distinguished by the width of the transparency created in the absorption profile of a weak probe in presence of a strong control field. This often leads to ambiguities, as both phenomena yield similar spectroscopic signature. However, an objective method based on Akaike's Information Cr… ▽ More Electromagnetically induced transparency (EIT) and Autler-Townes splitting (ATS) are generally characterized and distinguished by the width of the transparency created in the absorption profile of a weak probe in presence of a strong control field. This often leads to ambiguities, as both phenomena yield similar spectroscopic signature. However, an objective method based on Akaike's Information Criterion (AIC) test offers a quantitative way to discern the two regimes when applied on the probe absorption profile. The obtained transition value of control field strength was found to be higher than the value given by pole analysis of the corresponding off-diagonal density matrix element. By contrast, we apply the test on ground state coherence and the measured coherence quantifier, which yields a distinct transition point around the predicted value even in presence of noise. Our test accurately captures the transition between two regimes, indicating that a proper measure of coherence is essential for making such distinctions. △ Less

Submitted 15 November, 2023; v1 submitted 5 September, 2023; originally announced September 2023.

Comments: 7 pages, 5 figures

A predictive model for fluid-saturated, brittle granular materials during high-velocity impact events

Authors: Aaron S. Baumgarten, Justin Moreno, Brett Kuwik, Sohanjit Ghosh, Ryan Hurley, K. T. Ramesh

Abstract: Granular materials -- aggregates of many discrete, disconnected solid particles -- are ubiquitous in natural and industrial settings. Predictive models for their behavior have wide ranging applications, e.g. in defense, mining, construction, pharmaceuticals, and the exploration of planetary surfaces. In many of these applications, granular materials mix and interact with liquids and gases, changin… ▽ More Granular materials -- aggregates of many discrete, disconnected solid particles -- are ubiquitous in natural and industrial settings. Predictive models for their behavior have wide ranging applications, e.g. in defense, mining, construction, pharmaceuticals, and the exploration of planetary surfaces. In many of these applications, granular materials mix and interact with liquids and gases, changing their effective behavior in non-intuitive ways. Although such materials have been studied for more than a century, a unified description of their behaviors remains elusive. In this work, we develop a model for granular materials and mixtures that is usable under particularly challenging conditions: high-velocity impact events. This model combines descriptions for the many deformation mechanisms that are activated during impact -- particle fracture and breakage; pore collapse and dilation; shock loading; and pore fluid coupling -- within a thermo-mechanical framework based on poromechanics and mixture theory. This approach allows for simultaneous modeling of the granular material and the pore fluid, and includes both their independent motions and their complex interactions. A general form of the model is presented alongside its specific application to two types of sands that have been studied in the literature. The model predictions are shown to closely match experimental observation of these materials through several GPa stresses, and simulations are shown to capture the different dynamic responses of dry and fully-saturated sand to projectile impacts at 1.3 km/s. △ Less

Submitted 31 August, 2023; originally announced August 2023.

Correlated Nonreciprocity around Conjugate Exceptional Points

Authors: Arnab Laha, Adam Miranowicz, R. K. Varshney, Somnath Ghosh

Abstract: The occurrence of exceptional points (EPs) is a fascinating non-Hermitian feature of open systems. A level-repulsion phenomenon between two complex states of an open system can be realized by positioning an EP and its time-reversal (T) conjugate pair in the underlying parameter space. Here, we report the fascinating nonreciprocal response of such two conjugate EPs by using a dual-mode planar waveg… ▽ More The occurrence of exceptional points (EPs) is a fascinating non-Hermitian feature of open systems. A level-repulsion phenomenon between two complex states of an open system can be realized by positioning an EP and its time-reversal (T) conjugate pair in the underlying parameter space. Here, we report the fascinating nonreciprocal response of such two conjugate EPs by using a dual-mode planar waveguide system having two T-symmetric active variants concerning the transverse gain-loss profiles. We specifically reveal a comprehensive all-optical scheme to achieve correlative nonreciprocal light dynamics by using the reverse chirality of two dynamically encircled conjugate EPs in the presence of local nonlinearity. A specific nonreciprocal correlation between two designed T-symmetric waveguide variants is established in terms of their unidirectional transfer of light with a precise selection of modes. Here, the unconventional reverse chiral properties of two conjugate EPs allow the nonreciprocal transmission of two selective modes in the opposite directions of the underlying waveguide variants. An explicit dependence of the nonlinearity level on a significant enhancement of the nonreciprocity in terms of an isolation ratio is explored by investigating the effects of both local Kerr-type and saturable nonlinearities (considered separately). The physical insights and implications of harnessing the properties of conjugate EPs in nonlinear optical systems can enable the growth and development of a versatile platform for building nonreciprocal components and devices. △ Less

Submitted 25 August, 2023; originally announced August 2023.

Comments: 10 pages, 7 figures

Journal ref: Phys. Rev. A 109, 033511 (2024)

Electronic Structure Prediction of Multi-million Atom Systems Through Uncertainty Quantification Enabled Transfer Learning

Authors: Shashank Pathrudkar, Ponkrshnan Thiagarajan, Shivang Agarwal, Amartya S. Banerjee, Susanta Ghosh

Abstract: The ground state electron density -- obtainable using Kohn-Sham Density Functional Theory (KS-DFT) simulations -- contains a wealth of material information, making its prediction via machine learning (ML) models attractive. However, the computational expense of KS-DFT scales cubically with system size which tends to stymie training data generation, making it difficult to develop quantifiably accur… ▽ More The ground state electron density -- obtainable using Kohn-Sham Density Functional Theory (KS-DFT) simulations -- contains a wealth of material information, making its prediction via machine learning (ML) models attractive. However, the computational expense of KS-DFT scales cubically with system size which tends to stymie training data generation, making it difficult to develop quantifiably accurate ML models that are applicable across many scales and system configurations. Here, we address this fundamental challenge by employing transfer learning to leverage the multi-scale nature of the training data, while comprehensively sampling system configurations using thermalization. Our ML models are less reliant on heuristics, and being based on Bayesian neural networks, enable uncertainty quantification. We show that our models incur significantly lower data generation costs while allowing confident -- and when verifiable, accurate -- predictions for a wide variety of bulk systems well beyond training, including systems with defects, different alloy compositions, and at unprecedented, multi-million-atom scales. Moreover, such predictions can be carried out using only modest computational resources. △ Less

Submitted 1 May, 2024; v1 submitted 24 August, 2023; originally announced August 2023.

Temperature Dependent Low-Frequency Noise Characteristics of NiO$_x$/Ga$_2$O$_3$ p-n Heterojunction Diodes

Authors: Subhajit Ghosh, Dinusha Herath Mudiyanselage, Fariborz Kargar, Yuji Zhao, Houqiang Fu, Alexander A. Balandin

Abstract: We report on the temperature dependence of the low-frequency electronic noise in NiO$_x$/Ga$_2$O$_3$ p-n heterojunction diodes. The noise spectral density is of the 1/f-type near room temperature but shows signatures of Lorentzian components at elevated temperatures and at higher current levels (f is the frequency). We observed an intriguing non-monotonic dependence of the noise on temperature nea… ▽ More We report on the temperature dependence of the low-frequency electronic noise in NiO$_x$/Ga$_2$O$_3$ p-n heterojunction diodes. The noise spectral density is of the 1/f-type near room temperature but shows signatures of Lorentzian components at elevated temperatures and at higher current levels (f is the frequency). We observed an intriguing non-monotonic dependence of the noise on temperature near T = 380$^\circ$ K. The Raman spectroscopy of the device structure suggests material changes, which results in reduced noise above this temperature. The normalized noise spectral density in such diodes was determined to be on the order of 10$^{-14}$ cm$^2$/Hz (f = 10 Hz) at 0.1 A/cm$^2$ current density. In terms of the noise level, NiO$_x$/Ga$_2$O$_3$ p-n diodes occupy an intermediate position among devices of various designs implemented with different ultra-wide-band-gap (UWBG) semiconductors. The obtained results are important for understanding the electronic properties of the UWBG heterojunctions and contribute to the development of noise spectroscopy as the quality assessment tool for new electronic materials and device technologies. △ Less

Submitted 28 July, 2023; originally announced July 2023.

Comments: 18 pages, 6 figures

Visual Representation for Patterned Proliferation of Social Media Addiction: Quantitative Model and Network Analysis

Authors: Dibyajyoti Mallick, Priya Chakraborty, Sayantari Ghosh

Abstract: With the advancement of information technology, more people, especially young adults, are getting addicted to the use of different social media platforms. Despite immense useful applications in communication and interactions, the habit of spending excessive time on these social media platforms is becoming addictive, causing different consequences, like anxiety, depression, health problems, and man… ▽ More With the advancement of information technology, more people, especially young adults, are getting addicted to the use of different social media platforms. Despite immense useful applications in communication and interactions, the habit of spending excessive time on these social media platforms is becoming addictive, causing different consequences, like anxiety, depression, health problems, and many more. Here, we mathematically explored a model of social media addiction, including a peer-influence relapse. We have further done the complex network analysis for a heterogenic synthetic society. Finally, we explore spatiotemporal pattern formation in a diffusive social system using the reaction-diffusion approach. Our model shows how the existent nonlinearity in the system makes it difficult to make society social media addiction free once it crosses a certain threshold. Some possible strategies are explored mathematically to prevent social media addiction, and the importance of peer-influenced relapse has been identified as a major barrier. △ Less

Submitted 19 July, 2023; originally announced July 2023.

Comments: 13 pages,6 figures

Laser based optical interferometer manometer design for primary pressure standard in India

Authors: Manoj Das, Sandip Kumar Ghosh, Kuldeep Kumar, Elizabeth Jeessa James, Megha Singh, Ashok Kumar

Abstract: The SI unit of pressure, i.e. Pascal is realized with mechanical devices such as ultrasonic interferometer manometers and pressure balances for the pressure range 1 Pa to 100 kPa. Recently, optical interferometer manometers are being used to realize Pascal. Such a realization is mercury-free and environmentally friendly and does not depend on any mechanical motions as in piston gauges and is based… ▽ More The SI unit of pressure, i.e. Pascal is realized with mechanical devices such as ultrasonic interferometer manometers and pressure balances for the pressure range 1 Pa to 100 kPa. Recently, optical interferometer manometers are being used to realize Pascal. Such a realization is mercury-free and environmentally friendly and does not depend on any mechanical motions as in piston gauges and is based on physical constants. It consists of an optical Fabry-Perot cavity as a refractometer and is based on the measurement of the resonant frequency of the cavity using lasers. In this paper, we report the theoretical calculations for such an optical cavity and discuss various parameters for the laser required for developing such a cavity-based refractometer system. We present the mechanical design for the dual cavity and an all-fiber optical set-up to be used for the next generation of primary pressure standards in the barometric region of pressure at CSIR-National physical laboratory, India. △ Less

Submitted 17 June, 2023; originally announced July 2023.

Comments: 8 pages, 7 figures