Showing 1–50 of 96 results for author: Garcia, L

XENONnT WIMP Search: Signal & Background Modeling and Statistical Inference

Authors: XENON Collaboration, E. Aprile, J. Aalbers, K. Abe, S. Ahmed Maouloud, L. Althueser, B. Andrieu, E. Angelino, D. Antón Martin, F. Arneodo, L. Baudis, M. Bazyk, L. Bellagamba, R. Biondi, A. Bismark, K. Boese, A. Brown, G. Bruno, R. Budnik, J. M. R. Cardoso, A. P. Cimental Chávez, A. P. Colijn, J. Conrad, J. J. Cuenca-García, V. D'Andrea , et al. (139 additional authors not shown)

Abstract: The XENONnT experiment searches for weakly-interacting massive particle (WIMP) dark matter scattering off a xenon nucleus. In particular, XENONnT uses a dual-phase time projection chamber with a 5.9-tonne liquid xenon target, detecting both scintillation and ionization signals to reconstruct the energy, position, and type of recoil. A blind search for nuclear recoil WIMPs with an exposure of 1.1 t… ▽ More The XENONnT experiment searches for weakly-interacting massive particle (WIMP) dark matter scattering off a xenon nucleus. In particular, XENONnT uses a dual-phase time projection chamber with a 5.9-tonne liquid xenon target, detecting both scintillation and ionization signals to reconstruct the energy, position, and type of recoil. A blind search for nuclear recoil WIMPs with an exposure of 1.1 tonne-years yielded no signal excess over background expectations, from which competitive exclusion limits were derived on WIMP-nucleon elastic scatter cross sections, for WIMP masses ranging from 6 GeV/$c^2$ up to the TeV/$c^2$ scale. This work details the modeling and statistical methods employed in this search. By means of calibration data, we model the detector response, which is then used to derive background and signal models. The construction and validation of these models is discussed, alongside additional purely data-driven backgrounds. We also describe the statistical inference framework, including the definition of the likelihood function and the construction of confidence intervals. △ Less

Submitted 19 June, 2024; originally announced June 2024.

Comments: 20 pages, 10 figures

An Introduction to Computational Fluctuating Hydrodynamics

Authors: Alejandro L. Garcia, John B. Bell, Andrew Nonaka, Ishan Srivastava, Daniel Ladiges, Changho Kim

Abstract: These notes are an introduction to fluctuating hydrodynamics (FHD) and the formulation of numerical schemes for the resulting stochastic partial differential equations (PDEs). Fluctuating hydrodynamics was originally introduced by Landau and Lifshitz as a way to put thermal fluctuations into a continuum framework by including a stochastic forcing to each dissipative transport process (e.g., heat f… ▽ More These notes are an introduction to fluctuating hydrodynamics (FHD) and the formulation of numerical schemes for the resulting stochastic partial differential equations (PDEs). Fluctuating hydrodynamics was originally introduced by Landau and Lifshitz as a way to put thermal fluctuations into a continuum framework by including a stochastic forcing to each dissipative transport process (e.g., heat flux). While FHD has been useful in modeling transport and fluid dynamics at the mesoscopic scale, theoretical calculations have been feasible only with simplifying assumptions. As such there is great interest in numerical schemes for Computational Fluctuating Hydrodynamics (CFHD). There are a variety of algorithms (e.g., spectral, finite element, lattice Boltzmann) but in this introduction we focus on finite volume schemes. Accompanying these notes is a demonstration program in Python available on GitHub. △ Less

Submitted 17 June, 2024; originally announced June 2024.

Point process analysis of geographical diffusion of news in Argentina

Authors: Lucio L. Garcia, Giulio Tirabassi, Cristina Masoller, Pablo Balenzuela

Abstract: The diffusion of information plays a crucial role in a society, characterizing the diffusion process is challenging because it is highly non-stationary and varies with the media type. To understand the spreading of newspaper news in Argentina, we collected data from more than 27000 articles published in six main provinces during four months. We classified the articles into 20 thematic axes and obt… ▽ More The diffusion of information plays a crucial role in a society, characterizing the diffusion process is challenging because it is highly non-stationary and varies with the media type. To understand the spreading of newspaper news in Argentina, we collected data from more than 27000 articles published in six main provinces during four months. We classified the articles into 20 thematic axes and obtained a set of 120 time series that capture daily newspaper attention on different topics in different provinces. To analyze the data we use a point process approach. For each topic, $n$, and for all pairs of provinces, $i$ and $j$, we use two measures to quantify the synchronicity of the events, $Q_s(i,j)$, which quantifies the number of events that occur almost simultaneously in $i$ and $j$, and $Q_a(i,j)$, which quantifies the direction of news spreading. We also analyze the dataset using well-known measures to detect correlations and dependencies, computed from the raw time series: undirected measures (linear cross-correlation, $CC$, and nonlinear mutual information, $MI$) and directed measures (linear Granger causality, $GC$, and nonlinear Transfer entropy, $TE$). Our analysis unveils how fast the information diffusion process is, as high values of $Q_{s}$, $CC$, and $MI$ reveal pairs of provinces with very similar and almost simultaneous temporal variations of media attention. On the other hand, $GC$ and $TE$ do not perform well in this context because they often return opposite directions of information transfer. We interpret this as due to three main factors: the characteristics of the data, which is highly non-stationary, the characteristics of the information diffusion process, which is very fast and probably acts at a sub-resolution time scale, and the action of large media companies that act as global, external drivers of information dissemination. △ Less

Submitted 29 May, 2024; originally announced May 2024.

New bounds on heavy axions with an X-ray free electron laser

Authors: Jack W. D. Halliday, Giacomo Marocco, Konstantin A. Beyer, Charles Heaton, Motoaki Nakatsutsumi, Thomas R. Preston, Charles D. Arrowsmith, Carsten Baehtz, Sebastian Goede, Oliver Humphries, Alejandro Laso Garcia, Richard Plackett, Pontus Svensson, Georgios Vacalis, Justin Wark, Daniel Wood, Ulf Zastrau, Robert Bingham, Ian Shipsey, Subir Sarkar, Gianluca Gregori

Abstract: We present new exclusion bounds obtained at the European X-ray Free Electron Laser facility (EuXFEL) on axion-like particles (ALPs) in the mass range 10^{-3} eV < m_a < 10^{4} eV. Our experiment exploits the Primakoff effect via which photons can, in the presence of a strong external electric field, decay into axions, which then convert back into photons after passing through an opaque wall. While… ▽ More We present new exclusion bounds obtained at the European X-ray Free Electron Laser facility (EuXFEL) on axion-like particles (ALPs) in the mass range 10^{-3} eV < m_a < 10^{4} eV. Our experiment exploits the Primakoff effect via which photons can, in the presence of a strong external electric field, decay into axions, which then convert back into photons after passing through an opaque wall. While similar searches have been performed previously at a 3^rd generation synchrotron [1], our work demonstrates improved sensitivity, exploiting the higher brightness of X-rays at EuXFEL. △ Less

Submitted 6 July, 2024; v1 submitted 26 April, 2024; originally announced April 2024.

Comments: 7 pages, 6 figures

Comment on "Brownian motion of droplets induced by thermal noise"

Authors: J. B. Bell, A. Nonaka, A. L. Garcia

Abstract: We simulate phase separated fluids using the Cahn-Hillard fluctuating hydrodynamic (CH-FHD) model and measure the statistical properties of capillary waves generated by thermal fluctuations. Our measurements are in good agreement with stochastic lubrication theory and molecular dynamics simulations but differ significantly from recent CH-FHD results by Zhang et al. (Phys. Rev. E 109 024208 (2024))… ▽ More We simulate phase separated fluids using the Cahn-Hillard fluctuating hydrodynamic (CH-FHD) model and measure the statistical properties of capillary waves generated by thermal fluctuations. Our measurements are in good agreement with stochastic lubrication theory and molecular dynamics simulations but differ significantly from recent CH-FHD results by Zhang et al. (Phys. Rev. E 109 024208 (2024)). Specifically, we find that capillary wave statistics at thermodynamic equilibrium are independent of transport properties, namely viscosity and species diffusion. △ Less

Submitted 1 April, 2024; originally announced April 2024.

Comments: Comment on arXiv:2311.13320

Offline tagging of radon-induced backgrounds in XENON1T and applicability to other liquid xenon detectors

Authors: E. Aprile, J. Aalbers, K. Abe, S. Ahmed Maouloud, L. Althueser, B. Andrieu, E. Angelino, J. R. Angevaare, D. Antón Martin, F. Arneodo, L. Baudis, A. L. Baxter, M. Bazyk, L. Bellagamba, R. Biondi, A. Bismark, E. J. Brookes, A. Brown, G. Bruno, R. Budnik, T. K. Bui, J. M. R. Cardoso, A. P. Cimental Chavez, A. P. Colijn, J. Conrad , et al. (142 additional authors not shown)

Abstract: This paper details the first application of a software tagging algorithm to reduce radon-induced backgrounds in liquid noble element time projection chambers, such as XENON1T and XENONnT. The convection velocity field in XENON1T was mapped out using $^{222}\text{Rn}$ and $^{218}\text{Po}$ events, and the root-mean-square convection speed was measured to be $0.30 \pm 0.01$ cm/s. Given this velocity… ▽ More This paper details the first application of a software tagging algorithm to reduce radon-induced backgrounds in liquid noble element time projection chambers, such as XENON1T and XENONnT. The convection velocity field in XENON1T was mapped out using $^{222}\text{Rn}$ and $^{218}\text{Po}$ events, and the root-mean-square convection speed was measured to be $0.30 \pm 0.01$ cm/s. Given this velocity field, $^{214}\text{Pb}$ background events can be tagged when they are followed by $^{214}\text{Bi}$ and $^{214}\text{Po}$ decays, or preceded by $^{218}\text{Po}$ decays. This was achieved by evolving a point cloud in the direction of a measured convection velocity field, and searching for $^{214}\text{Bi}$ and $^{214}\text{Po}$ decays or $^{218}\text{Po}$ decays within a volume defined by the point cloud. In XENON1T, this tagging system achieved a $^{214}\text{Pb}$ background reduction of $6.2^{+0.4}_{-0.9}\%$ with an exposure loss of $1.8\pm 0.2 \%$, despite the timescales of convection being smaller than the relevant decay times. We show that the performance can be improved in XENONnT, and that the performance of such a software-tagging approach can be expected to be further improved in a diffusion-limited scenario. Finally, a similar method might be useful to tag the cosmogenic $^{137}\text{Xe}$ background, which is relevant to the search for neutrinoless double-beta decay. △ Less

Submitted 19 June, 2024; v1 submitted 21 March, 2024; originally announced March 2024.

Comments: 17 pages, 19 figures

Cylindrical compression of thin wires by irradiation with a Joule-class short pulse laser

Authors: Alejandro Laso Garcia, Long Yang, Victorien Bouffetier, Karen Apple, Carsten Baehtz, Johannes Hagemann, Hauke Höppner, Oliver Humphries, Mikhail Mishchenko, Motoaki Nakatsutsumi, Alexander Pelka, Thomas R. Preston, Lisa Randolph, Ulf Zastrau, Thomas E. Cowan, Lingen Huang, Toma Toncian

Abstract: Equation of state measurements at Jovian or stellar conditions are currently conducted by dynamic shock compression driven by multi-kilojoule multi-beam nanosecond-duration lasers. These experiments require precise design of the target and specific tailoring of the spatial and temporal laser profiles to reach the highest pressures. At the same time, the studies are limited by the low repetition ra… ▽ More Equation of state measurements at Jovian or stellar conditions are currently conducted by dynamic shock compression driven by multi-kilojoule multi-beam nanosecond-duration lasers. These experiments require precise design of the target and specific tailoring of the spatial and temporal laser profiles to reach the highest pressures. At the same time, the studies are limited by the low repetition rate of the lasers. Here, we show that by the irradiation of a thin wire with single beam Joule-class short-pulse laser, a converging cylindrical shock is generated compressing the wire material to conditions relevant for the above applications. The shockwave was observed using Phase Contrast Imaging employing a hard X-ray Free Electron Laser with unprecedented temporal and spatial sensitivity. The data collected for Cu wires is in agreement with hydrodynamic simulations of an ablative shock launched by a highly-impulsive and transient resistive heating of the wire surface. The subsequent cylindrical shockwave travels towards the wire axis and is predicted to reach a compression factor of 9 and pressures above 800 Mbar. Simulations for astrophysical relevant materials underline the potential of this compression technique as a new tool for high energy density studies at high repetition rates. △ Less

Submitted 10 February, 2024; originally announced February 2024.

Astrophysics as a Service: Turning radio astronomy as an opportunity to impact society and businesses

Authors: Elias S. Fliger, Leandro M. García, Martín Salibe

Abstract: For more than 25 years, the Instituto Argentino de Radioastronomía has been directing efforts from basic research and radio astronomy development to technology transfer projects around Argentina's National Space Plan and to Small and Medium Enterprises. With the surge of COVID-19, our organization's transformation accelerated, bringing new opportunities and challenges which can be applied to impac… ▽ More For more than 25 years, the Instituto Argentino de Radioastronomía has been directing efforts from basic research and radio astronomy development to technology transfer projects around Argentina's National Space Plan and to Small and Medium Enterprises. With the surge of COVID-19, our organization's transformation accelerated, bringing new opportunities and challenges which can be applied to impact health, education, processes and businesses. In this article, we explore our efforts to bridge the gap between basic science and the needs of our society. △ Less

Submitted 29 January, 2024; originally announced January 2024.

Effect of the neutral beam injector operational regime on the Alfven eigenmode saturation phase in DIII-D plasma

Authors: J Varela, D A Spong, L Garcia, Y Ghai, D Zarzoso, D del-Castillo-Negrete, H Betar, J Ortiz, D C Pace, M A Van Zeeland, X Du, R Sanchez, V Tribaldos, J M Reynolds-Barredo

Abstract: The aim of this study is to analyze the effect of the neutral beam injector (NBI) operation regime on the saturation phase of the Alfven Eigenmodes (AEs) in DIII-D plasma. The analysis is done using the linear and nonlinear versions of the gyro-fluid code FAR3d. A set of parametric analyses are performed modifying the nonlinear simulation EP \b{eta} (NBI injection power), EP energy (NBI voltage) a… ▽ More The aim of this study is to analyze the effect of the neutral beam injector (NBI) operation regime on the saturation phase of the Alfven Eigenmodes (AEs) in DIII-D plasma. The analysis is done using the linear and nonlinear versions of the gyro-fluid code FAR3d. A set of parametric analyses are performed modifying the nonlinear simulation EP \b{eta} (NBI injection power), EP energy (NBI voltage) and the radial location of the EP density profile gradient (NBI radial deposition). The analysis indicates a transition from the soft (local plasma relaxation) to the hard MHD (global plasma relaxation) limit if the simulation EP \b{eta} >= 0.02, leading to bursting MHD activity caused by radial AEs overlapping. MHD bursts cause an enhancement of the EP transport showing ballistic-like features as avalanche-like events. Simulations in the soft MHD limit show an increment of the EP density gradient as the EP \b{eta} increases. On the other hand, there is a gradient upper limit in the hard MHD limit, consistent with the critical-gradient behavior. AEs induce shear flows and zonal current leading to the deformation of the flux surfaces and the safety factor profile, respectively, particularly strong for the simulation in the hard MHD limit. Simulations in the hard MHD regime show a decrease of the AE frequency in the saturation phase; this is caused by the destabilization of a transitional mode between a 9/3-10/3 TAE and a 9/3 RSAE that may explain the AE frequency down-sweeping observed in some DIII-D discharges. Reducing the EP energy in the nonlinear simulations leads to a weakening of the plasma perturbation. On the other hand, increasing the EP energy causes the opposite effect. Nonlinear simulations of off-axis NBI profiles indicate a lower plasma perturbation as the EP density gradient is located further away from the magnetic axis. △ Less

Submitted 7 November, 2023; originally announced November 2023.

Journal ref: Plasma Phys. Control. Fusion 65 125004 2023

Analyzing User Ideologies and Shared News During the 2019 Argentinian Elections

Authors: Sofía M del Pozo, Sebastián Pinto, Matteo Serafino, Lucio Garcia, Hernán A Makse, Pablo Balenzuela

Abstract: The extensive data generated on social media platforms allow us to gain insights over trending topics and public opinions. Additionally, it offers a window into user behavior, including their content engagement and news sharing habits. In this study, we analyze the relationship between users' political ideologies and the news they share during Argentina's 2019 election period. Our findings reveal… ▽ More The extensive data generated on social media platforms allow us to gain insights over trending topics and public opinions. Additionally, it offers a window into user behavior, including their content engagement and news sharing habits. In this study, we analyze the relationship between users' political ideologies and the news they share during Argentina's 2019 election period. Our findings reveal that users predominantly share news that aligns with their political beliefs, despite accessing media outlets with diverse political leanings. Moreover, we observe a consistent pattern of users sharing articles related to topics biased to their preferred candidates, highlighting a deeper level of political alignment in online discussions. We believe that this systematic analysis framework can be applied to similar scenarios in different countries, especially those marked by significant political polarization, akin to Argentina. △ Less

Submitted 25 April, 2024; v1 submitted 12 October, 2023; originally announced October 2023.

Artificial Intelligence for Prediction of Climate Extremes: State of the art, challenges and future perspectives

Authors: Stefano Materia, Lluís Palma García, Chiem van Straaten, Sungmin O, Antonios Mamalakis, Leone Cavicchia, Dim Coumou, Paolo De Luca, Marlene Kretschmer, Markus G. Donat

Abstract: Scientific and technological advances in numerical modelling have improved the quality of climate predictions over recent decades, but predictive skill remains limited in many aspects. Extreme events such as heat and cold waves, droughts, heavy rain and storms are particularly challenging to predict accurately due to their rarity and non-linear chaotic nature, and because of model limitations. How… ▽ More Scientific and technological advances in numerical modelling have improved the quality of climate predictions over recent decades, but predictive skill remains limited in many aspects. Extreme events such as heat and cold waves, droughts, heavy rain and storms are particularly challenging to predict accurately due to their rarity and non-linear chaotic nature, and because of model limitations. However, recent studies have shown that predictive skill of extremes can be increased when using more sophisticated approaches, indicating that there might be systemic predictability that is not being leveraged. Recently, numerous studies have been devoted to the exploitation of Artificial Intelligence (AI) to study the predictability and make predictions of weather and climate. AI techniques have shown great potential to improve the prediction of extreme events and uncover their links to large-scale and local drivers. Machine and deep learning, causal discovery, explainable AI, are only some of the approaches that have been tested to both improve our understanding of the processes underlying predictability and enhance prediction skill of extreme events. Results are promising, especially for hybrid predictions that combine the AI, which can reveal and exploit unknown spatio-temporal connections from data, and climate models, that provide the theoretical foundation and interpretability of the physical world. On the other hand, challenges are multiple in many aspects, from data curation to model uncertainty and generalizability, to the reproducibility of methods and workflows. A few best practices are identified to increase trust in these novel techniques, and future perspectives are envisaged for further scientific development. △ Less

Submitted 3 October, 2023; originally announced October 2023.

Comments: 20 pages, 4 figures, 2 tables

Reply to "Comment on `Validity of path thermodynamic description of reactive systems: Microscopic simulations'

Authors: F. Baras, A. L. Garcia, M. Malek Mansour

Abstract: The Comment's author argues that a correct description of reactive systems should incorporate the explicit interaction with reservoirs, leading to a unified system-reservoirs entity. However, this proposition has two major flaws. Firstly, as we will emphasize, this entity inherently follows a thermodynamic equilibrium distribution. In the Comment, no indication is provided on how to maintain such… ▽ More The Comment's author argues that a correct description of reactive systems should incorporate the explicit interaction with reservoirs, leading to a unified system-reservoirs entity. However, this proposition has two major flaws. Firstly, as we will emphasize, this entity inherently follows a thermodynamic equilibrium distribution. In the Comment, no indication is provided on how to maintain such a system-reservoirs entity in a non-equilibrium state. Secondly, contrary to the author's claim, the inclusion of system-reservoir interaction in traditional stochastic modeling of reactive systems does not automatically alter the limited applicability of path thermodynamics to problematic reactive systems. We will provide a simple demonstration to illustrate that certain elementary reactions may not involve any changes in reservoir components, which seems to have been overlooked by the author. △ Less

Submitted 11 September, 2023; originally announced September 2023.

Comments: To appear in Physical Review E

Destructive breakdown studies of irradiated LGADs at beam tests for the ATLAS HGTD

Authors: L. A. Beresford, D. E. Boumediene, L. Castillo García, L. D. Corpe, M. J. Da Cunha Sargedas de Sousa, H. El Jarrari, A. Eshkevarvakili, C. Grieco, S. Grinstein, S. Guindon, A. Howard, G. Kramberger, O. Kurdysh, R. Mazini, M. Missio, M. Morenas, O. Perrin, V. Raskina, G. Saito, S. Trincaz-Duvoid

Abstract: In the past years, it has been observed at several beam test campaigns that irradiated LGAD sensors break with a typical star shaped burn mark when operated at voltages much lower than those at which they were safely operated during laboratory tests. The study presented in this paper was designed to determine the safe operating voltage that these sensors can withstand. Many irradiated sensors from… ▽ More In the past years, it has been observed at several beam test campaigns that irradiated LGAD sensors break with a typical star shaped burn mark when operated at voltages much lower than those at which they were safely operated during laboratory tests. The study presented in this paper was designed to determine the safe operating voltage that these sensors can withstand. Many irradiated sensors from various producers were tested in two test beam facilities, DESY (Hamburg) and CERN-SPS (Geneva), as part of ATLAS High Granularity Timing Detector (HGTD) beam tests. The samples were placed in the beam and kept under bias over a long period of time in order to reach a high number of particles crossing each sensor. Both beam tests lead to a similar conclusion, that these destructive events begin to occur when the average electric field in the sensor becomes larger than 12 Volts per micrometre. △ Less

Submitted 14 July, 2023; v1 submitted 21 June, 2023; originally announced June 2023.

Comments: Published version

Journal ref: 2023 JINST 18 P07030

Performance of a front-end prototype ASIC for the ATLAS High Granularity Timing Detector

Authors: C. Agapopoulou, L. A. Beresford, D. E. Boumediene, L. Castillo García, S. Conforti, C. de la Taille, L. D. Corpe, M. J. Da Cunha Sargedas de Sousa, P. Dinaucourt, A. Falou, V. Gautam, D. Gong, C. Grieco, S. Grinstein, S. Guindon, A. Howard, O. Kurdysh, E. Kuwertz, C. Li, N. Makovec, B. Markovic, G. Martin-Chassal, R. Mazzini, C. Milke, M. Morenas , et al. (12 additional authors not shown)

Abstract: This paper presents the design and characterisation of a front-end prototype ASIC for the ATLAS High Granularity Timing Detector, which is planned for the High-Luminosity phase of the LHC. This prototype, called ALTIROC1, consists of a 5$\times$5-pad matrix and contains the analog part of the single-channel readout (preamplifier, discriminator, two TDCs and SRAM). Two preamplifier architectures (t… ▽ More This paper presents the design and characterisation of a front-end prototype ASIC for the ATLAS High Granularity Timing Detector, which is planned for the High-Luminosity phase of the LHC. This prototype, called ALTIROC1, consists of a 5$\times$5-pad matrix and contains the analog part of the single-channel readout (preamplifier, discriminator, two TDCs and SRAM). Two preamplifier architectures (transimpedance and voltage) were implemented and tested. The ASIC was characterised both alone and as a module when connected to a 5$\times$5-pad array of LGAD sensors. In calibration measurements, the ASIC operating alone was found to satisfy the technical requirements for the project, with similar performances for both preamplifier types. In particular, the jitter was found to be 15$\pm$1~ps (35$\pm$1~ps) for an injected charge of 10~fC (4~fC). A degradation in performance was observed when the ASIC was connected to the LGAD array. This is attributed to digital couplings at the entrance of the preamplifiers. When the ASIC is connected to the LGAD array, the lowest detectable charge increased from 1.5~fC to 3.4~fC. As a consequence, the jitter increased for an injected charge of 4~fC. Despite this increase, ALTIROC1 still satisfies the maximum jitter specification (below 65~ps) for the HGTD project. This coupling issue also affects the time over threshold measurements and the time-walk correction can only be performed with transimpedance preamplifiers. Beam test measurements with a pion beam at CERN were also undertaken to evaluate the performance of the module. The best time resolution obtained using only ALTIROC TDC data was 46.3$\pm$0.7~ps for a restricted time of arrival range where the coupling issue is minimized. The residual time-walk contribution is equal to 23~ps and is the dominant electronic noise contribution to the time resolution at 15~fC. △ Less

Submitted 25 July, 2023; v1 submitted 15 June, 2023; originally announced June 2023.

Comments: 20 pages, 15 figures Second version submitted to JINST including minor changes applied to address journal's comments

Steric effects in induced-charge electro-osmosis for strong electric fields

Authors: J. Galen Wang, Daniel R. Ladiges, Ishan Srivastava, Sean P. Carney, Andy J. Nonaka, Alejandro L. Garcia, John B. Bell

Abstract: We study the role of steric effects on the induced-charge electro-osmosis (ICEO) phenomenon using a recently developed mesoscale fluid model. A hybrid Eulerian-Lagrangian method is used to simulate the dynamics of discrete immersed ions in a thermally fluctuating solvent near a metallic plate embedded in the dielectric interface. We observe that the characteristic velocity scales almost linearly w… ▽ More We study the role of steric effects on the induced-charge electro-osmosis (ICEO) phenomenon using a recently developed mesoscale fluid model. A hybrid Eulerian-Lagrangian method is used to simulate the dynamics of discrete immersed ions in a thermally fluctuating solvent near a metallic plate embedded in the dielectric interface. We observe that the characteristic velocity scales almost linearly with electric field when the generated $ζ$-potentials exceed the order of the thermal voltage, as opposed to a quadratic scaling predicted by Helmholtz-Smoluchowski equation, although qualitative agreement with experiments and theories is obtained at low electric fields. Our simulations reveal that the steric effects play a crucial role at strong electric fields, which is observed from the aggregation of ions towards the center of the metal plate instead of at the edges, and the overcharging of co-ions to the surface charge near the electric double layer. A comparison to a continuum electrolyte model also highlights significant differences in charge distribution and flow field that are attributed to the steric repulsion between ions. △ Less

Submitted 18 May, 2023; originally announced May 2023.

Comments: 34 pages, 11 figures

The LHCb upgrade I

Authors: LHCb collaboration, R. Aaij, A. S. W. Abdelmotteleb, C. Abellan Beteta, F. Abudinén, C. Achard, T. Ackernley, B. Adeva, M. Adinolfi, P. Adlarson, H. Afsharnia, C. Agapopoulou, C. A. Aidala, Z. Ajaltouni, S. Akar, K. Akiba, P. Albicocco, J. Albrecht, F. Alessio, M. Alexander, A. Alfonso Albero, Z. Aliouche, P. Alvarez Cartelle, R. Amalric, S. Amato , et al. (1298 additional authors not shown)

Abstract: The LHCb upgrade represents a major change of the experiment. The detectors have been almost completely renewed to allow running at an instantaneous luminosity five times larger than that of the previous running periods. Readout of all detectors into an all-software trigger is central to the new design, facilitating the reconstruction of events at the maximum LHC interaction rate, and their select… ▽ More The LHCb upgrade represents a major change of the experiment. The detectors have been almost completely renewed to allow running at an instantaneous luminosity five times larger than that of the previous running periods. Readout of all detectors into an all-software trigger is central to the new design, facilitating the reconstruction of events at the maximum LHC interaction rate, and their selection in real time. The experiment's tracking system has been completely upgraded with a new pixel vertex detector, a silicon tracker upstream of the dipole magnet and three scintillating fibre tracking stations downstream of the magnet. The whole photon detection system of the RICH detectors has been renewed and the readout electronics of the calorimeter and muon systems have been fully overhauled. The first stage of the all-software trigger is implemented on a GPU farm. The output of the trigger provides a combination of totally reconstructed physics objects, such as tracks and vertices, ready for final analysis, and of entire events which need further offline reprocessing. This scheme required a complete revision of the computing model and rewriting of the experiment's software. △ Less

Submitted 17 May, 2023; originally announced May 2023.

Comments: All figures and tables, along with any supplementary material and additional information, are available at http://lhcbproject.web.cern.ch/lhcbproject/Publications/LHCbProjectPublic/LHCb-DP-2022-002.html (LHCb public pages)

Report number: LHCb-DP-2022-002

Visualizing Plasmons and Ultrafast Kinetic Instabilities in Laser-Driven Solids using X-ray Scattering

Authors: Paweł Ordyna, Carsten Bähtz, Erik Brambrink, Michael Bussmann, Alejandro Laso Garcia, Marco Garten, Lennart Gaus, Jörg Grenzer, Christian Gutt, Hauke Höppner, Lingen Huang, Oliver Humphries, Brian Edward Marré, Josefine Metzkes-Ng, Motoaki Nakatsutsumi, Özgül Öztürk, Xiayun Pan, Franziska Paschke-Brühl, Alexander Pelka, Irene Prencipe, Lisa Randolph, Hans-Peter Schlenvoigt, Michal Šmíd, Radka Stefanikova, Erik Thiessenhusen , et al. (5 additional authors not shown)

Abstract: Ultra-intense lasers that ionize and accelerate electrons in solids to near the speed of light can lead to kinetic instabilities that alter the laser absorption and subsequent electron transport, isochoric heating, and ion acceleration. These instabilities can be difficult to characterize, but a novel approach using X-ray scattering at keV energies allows for their visualization with femtosecond t… ▽ More Ultra-intense lasers that ionize and accelerate electrons in solids to near the speed of light can lead to kinetic instabilities that alter the laser absorption and subsequent electron transport, isochoric heating, and ion acceleration. These instabilities can be difficult to characterize, but a novel approach using X-ray scattering at keV energies allows for their visualization with femtosecond temporal resolution on the few nanometer mesoscale. Our experiments on laser-driven flat silicon membranes show the development of structure with a dominant scale of $~60\unit{nm}$ in the plane of the laser axis and laser polarization, and $~95\unit{nm}$ in the vertical direction with a growth rate faster than $0.1/\mathrm{fs}$. Combining the XFEL experiments with simulations provides a complete picture of the structural evolution of ultra-fast laser-induced instability development, indicating the excitation of surface plasmons and the growth of a new type of filamentation instability. These findings provide new insight into the ultra-fast instability processes in solids under extreme conditions at the nanometer level with important implications for inertial confinement fusion and laboratory astrophysics. △ Less

Submitted 22 January, 2024; v1 submitted 21 April, 2023; originally announced April 2023.

Analysis of the ECH effect on the EPM/AEs stability in Heliotron J plasma using a Landau closure model

Authors: J. Varela, K. Nagasaki, S. Kobayashi, K. Nagaoka, P. Adulsiriswad, A. Cappa, S. Yamamoto, K. Y. Watanabe, D. A. Spong, L. Garcia, Y. Ghai, J. Ortiz

Abstract: The aim of the present study is to analyze the effect of the electron cyclotron heating (ECH) on the linear stability of Alfven Eigenmodes (AE) and energetic particle modes (EPM) triggered by energetic ions in Heliotron J plasma. The analysis is performed using the FAR3d code that solves a reduced MHD model to describe the thermal plasma coupled with a gyrofluid model for the energetic particles (… ▽ More The aim of the present study is to analyze the effect of the electron cyclotron heating (ECH) on the linear stability of Alfven Eigenmodes (AE) and energetic particle modes (EPM) triggered by energetic ions in Heliotron J plasma. The analysis is performed using the FAR3d code that solves a reduced MHD model to describe the thermal plasma coupled with a gyrofluid model for the energetic particles (EP) species. The simulations reproduce the AE/EPM stability trends observed in the experiments as the electron temperature (Te) increases, modifying the thermal plasma beta, EP beta and EP slowing down time. Particularly, the n/m=1/2 EPM and 2/4 Global AE (GAE) are stabilized in the low bumpiness (LB) configuration due to an enhancement of the continuum, Finite Larmor radius (FLR) and e-i Landau damping effects as the thermal beta increases. On the other hand, a larger ECH injection power cannot stabilize the AE/EPM in Medium (MB) and High bumpiness (HB) configurations because the damping effects are weaker compared to the LB case, unable to balance the further destabilization induced by an enhanced EP resonance as the EP slowing down time and EP beta increases with Te △ Less

Submitted 18 April, 2023; originally announced April 2023.

Journal ref: Nucl. Fusion 63 026009 (2023)

Simulation of the TAEs saturation phase in Large Helical Device device: MHD burst

Authors: J. Varela, D. A. Spong, Y. Todo, L. Garcia, Y. Ghai, J. Ortiz, R. Seki

Abstract: The aim of the present study is to analyze the saturation regime of the Toroidal Alfven Eigenmodes (TAE) in the LHD plasma, particularly the MHD burst. The linear and nonlinear evolution of the TAEs are simulated by the FAR3d code that uses a reduced MHD model for the thermal plasma coupled with a gyrofluid model for the energetic particles (EP) species. The linear simulations indicate the overlap… ▽ More The aim of the present study is to analyze the saturation regime of the Toroidal Alfven Eigenmodes (TAE) in the LHD plasma, particularly the MHD burst. The linear and nonlinear evolution of the TAEs are simulated by the FAR3d code that uses a reduced MHD model for the thermal plasma coupled with a gyrofluid model for the energetic particles (EP) species. The linear simulations indicate the overlapping of 1/2-1/1, 2/3-2/4 and 3/5-3/6 TAEs in the inner-middle plasma region and frequency range of 45-75 kHz, triggered by EPs with an energy of Tf = 45 keV and EP beta = 0.022. The nonlinear simulations show that 2/3-2/4 and 3/4-3/5 TAEs are further destabilized due to the energy transfer from 1/1-1/2 TAE, leading to a broad TAEs radial overlapping and the MHD burst triggering. The energy of 1/1-1/2 TAE is also nonlinearly transferred to the thermal plasma destabilizing the 0/0 and 0/1 modes, inducing the generation of shear flows and zonal currents as well as large deformations in the thermal pressure and EP density radial profiles. The nonlinear simulation reproduces the same succession of instabilities and the same frequency range with respect to the experiment. The instability propagates outward during the bursting phase, showing a large decrease of the EP density profile between the middle-outer plasma, pointing out the loss of part of the EP population that explains the decrease of the plasma heating efficiency observed during the MHD burst. △ Less

Submitted 17 April, 2023; originally announced April 2023.

Journal ref: Nucl. Fusion 62 126020 (2022)

Theoretical study of the Alfven Eigenmode stability in CFETR steady state discharges

Authors: J. Varela, J. Huang, D. A. Spong, J. Chen, V. Chan, L. Garcia, A. Wingen, Y. Ghai, Y. Zou

Abstract: The aim of this study is to analyze the stability of Alfven Eigenmodes (AE) in the China Fusion Engineering Test Reactor (CFETR) plasma for steady state operations. The analysis is done using the gyro-fluid code FAR3d including the effect of the acoustic modes, EP Finite Larmor radius damping effects and multiple energetic particle populations. Two high poloidal beta scenarios are studied with res… ▽ More The aim of this study is to analyze the stability of Alfven Eigenmodes (AE) in the China Fusion Engineering Test Reactor (CFETR) plasma for steady state operations. The analysis is done using the gyro-fluid code FAR3d including the effect of the acoustic modes, EP Finite Larmor radius damping effects and multiple energetic particle populations. Two high poloidal beta scenarios are studied with respect to the location of the internal transport barrier (ITB) at r/a = 0.45 (case A) and r/a = 0.6 (case B). Both operation scenarios show a narrow TAE gap between the inner-middle plasma region and a wide EAE gap all along the plasma radius. The AE stability of CFETR plasmas improves if the ITB is located inwards, case A, showing AEs with lower growth rates with respect to the case B. The AEs growth rate is smaller in the case A because the modes are located in the inner-middle plasma region where the stabilizing effect of the magnetic shear is stronger with respect to the case B. Multiple EP populations effects (NBI driven EP + alpha articles) are negligible for the case A, although the simulations for the case B show a stabilizing effect of the NBI EP on the n=1 BAE caused by alpha particles during the thermalization process. If the FLR damping effects are included in the simulations, the growth rate of the EAE/NAE decreases up to 70 %, particularly for n > 3 toroidal families. Low n AEs (n<6) show the largest growth rates. On the other hand, high $n$ modes (n=6 to 15) are triggered in the frequency range of the NAE, strongly damped by the FLR effects. △ Less

Submitted 17 April, 2023; originally announced April 2023.

Journal ref: Nucl. Fusion 62 036005 (2022)

Fluctuating Hydrodynamics and the Rayleigh-Plateau Instability

Authors: Bryn Barker, John B. Bell, Alejandro L. Garcia

Abstract: The Rayleigh-Plateau instability occurs when surface tension makes a fluid column become unstable to small perturbations. At nanometer scales, thermal fluctuations are comparable to surface energy densities. Consequently, at these scales, thermal fluctuations play a significant role in the dynamics of the instability. These microscopic effects have previously been investigated numerically using pa… ▽ More The Rayleigh-Plateau instability occurs when surface tension makes a fluid column become unstable to small perturbations. At nanometer scales, thermal fluctuations are comparable to surface energy densities. Consequently, at these scales, thermal fluctuations play a significant role in the dynamics of the instability. These microscopic effects have previously been investigated numerically using particle-based simulations, such as molecular dynamics, and stochastic partial differential equation based hydrodynamic models, such as stochastic lubrication theory. In this paper we present an incompressible fluctuating hydrodynamics model with a diffuse-interface formulation for binary fluid mixtures designed for the study of stochastic interfacial phenomena. An efficient numerical algorithm is outlined and validated in numerical simulations of stable equilibrium interfaces. We present results from simulations of the Rayleigh-Plateau instability for long cylinders pinching into droplets for Ohnesorge numbers of Oh = 0.5 and 5.0. Both stochastic and perturbed deterministic simulations are analyzed and ensemble results show significant differences in the temporal evolution of the minimum radius near pinching. Short cylinders, with lengths less than their circumference, were also investigated. As previously observed in molecular dynamics simulations, we find that thermal fluctuations cause these to pinch in cases where a perturbed cylinder would be stable deterministically. Finally we show that the fluctuating hydrodynamics model can be applied to study a broader range of surface-tension driven phenomena. △ Less

Submitted 19 June, 2023; v1 submitted 7 April, 2023; originally announced April 2023.

Performance in beam tests of Carbon-enriched irradiated Low Gain Avalanche Detectors for the ATLAS High Granularity Timing Detector

Authors: S. Ali, H. Arnold, S. L. Auwens, L. A. Beresford, D. E. Boumediene, A. M. Burger, L. Cadamuro, L. Castillo García, L. D. Corpe, M. J. Da Cunha Sargedas de Sousa, D. Dannheim, V. Dao, A. Gabrielli, Y. El Ghazali, H. El Jarrari, V. Gautam, S. Grinstein, J. Guimarães da Costa, S. Guindon, X. Jia, G. Kramberger, Y. Liu, K. Ma, N. Makovec, S. Manzoni , et al. (12 additional authors not shown)

Abstract: The High Granularity Timing Detector (HGTD) will be installed in the ATLAS experiment to mitigate pile-up effects during the High Luminosity (HL) phase of the Large Hadron Collider (LHC) at CERN. Low Gain Avalanche Detectors (LGADs) will provide high-precision measurements of the time of arrival of particles at the HGTD, improving the particle-vertex assignment. To cope with the high-radiation env… ▽ More The High Granularity Timing Detector (HGTD) will be installed in the ATLAS experiment to mitigate pile-up effects during the High Luminosity (HL) phase of the Large Hadron Collider (LHC) at CERN. Low Gain Avalanche Detectors (LGADs) will provide high-precision measurements of the time of arrival of particles at the HGTD, improving the particle-vertex assignment. To cope with the high-radiation environment, LGADs have been optimized by adding carbon in the gain layer, thus reducing the acceptor removal rate after irradiation. Performances of several carbon-enriched LGAD sensors from different vendors, and irradiated with high fluences of 1.5 and 2.5 x 10^15 neq/cm2, have been measured in beam test campaigns during the years 2021 and 2022 at CERN SPS and DESY. This paper presents the results obtained with data recorded by an oscilloscope synchronized with a beam telescope which provides particle position information within a resolution of a few um. Collected charge, time resolution and hit efficiency measurements are presented. In addition, the efficiency uniformity is also studied as a function of the position of the incident particle inside the sensor pad. △ Less

Submitted 17 March, 2023; v1 submitted 14 March, 2023; originally announced March 2023.

Probing the dynamics of solid density micro-wire targets after ultra-intense laser irradiation using a free-electron laser

Authors: Thomas Kluge, Michael Bussmann, Eric Galtier, Siegfried Glenzer, Jörg Grenzer, Christian Gutt, Nicholas J. Hartley, Lingen Huang, Alejandro Laso Garcia, Hae Ja Lee, Emma E. McBride, Josefine Metzkes-Ng, Motoaki Nakatsutsumi, Inhyuk Nam, Alexander Pelka, Irene Prencipe, Lisa Randolph, Martin Rehwald, Christian Rödel, Melanie Rödel, Toma Toncian, Long Yang, Karl Zeil, Ulrich Schramm, Thomas E. Cowan

Abstract: In this paper, we present an experiment that explores the plasma dynamics of a 7 micron diameter carbon wire after being irradiated with a near-relativistic-intensity short pulse laser. Using an X-ray Free Electron Laser pulse to measure the small angle X-ray scattering signal, we observe that the scattering surface is bent and prone to instability over tens of picoseconds. The dynamics of this pr… ▽ More In this paper, we present an experiment that explores the plasma dynamics of a 7 micron diameter carbon wire after being irradiated with a near-relativistic-intensity short pulse laser. Using an X-ray Free Electron Laser pulse to measure the small angle X-ray scattering signal, we observe that the scattering surface is bent and prone to instability over tens of picoseconds. The dynamics of this process are consistent with the presence of a sharp, propagating shock front inside the wire, moving at a speed close to the hole boring velocity. △ Less

Submitted 6 February, 2023; originally announced February 2023.

Validity of path thermodynamic description of reactive systems: Microscopic simulations

Authors: F. Baras, A. L. Garcia, M. Malek Mansour

Abstract: Traditional stochastic modeling of reactive systems limits the domain of applicability of the associated path thermodynamics to systems involving a single elementary reaction at the origin of each observed change in composition. An alternative stochastic modeling has recently been proposed to overcome this limitation. These two ways of modeling reactive systems are in principle incompatible. The q… ▽ More Traditional stochastic modeling of reactive systems limits the domain of applicability of the associated path thermodynamics to systems involving a single elementary reaction at the origin of each observed change in composition. An alternative stochastic modeling has recently been proposed to overcome this limitation. These two ways of modeling reactive systems are in principle incompatible. The question thus arises about choosing the appropriate type of modeling to be used in practical situations. In the absence of sufficiently accurate experimental results, one way to address this issue is through the microscopic simulation of reactive fluids, usually based on hard-sphere dynamics in the Boltzmann limit. In this paper, we show that results obtained through such simulations unambiguously confirm the predictions of traditional stochastic modeling, invalidating a recently proposed alternative. △ Less

Submitted 4 October, 2022; originally announced October 2022.

Overview of CNM LGAD results: Boron Si-on-Si and epitaxial wafers

Authors: Chiara Grieco, Lucía Castillo García, Albert Doblas Moreno, Evangelos Leonidas Gkougkousis, Sebastian Grinstein, Salvador Hidalgo, Neil Moffat, Giulio Pellegrini, Jairo Villegas Dominguez

Abstract: Low Gain Avalanche Detectors (LGADs) are n-on-p silicon sensors with an extra p-layer below the collection electrode which provides signal amplification. When the primary electrons reach the amplification region new electron-hole pairs are created that enhance the generated signal. The moderate gain of these sensors, together with the relatively thin active region, provide precise time information… ▽ More Low Gain Avalanche Detectors (LGADs) are n-on-p silicon sensors with an extra p-layer below the collection electrode which provides signal amplification. When the primary electrons reach the amplification region new electron-hole pairs are created that enhance the generated signal. The moderate gain of these sensors, together with the relatively thin active region, provide precise time information for minimum ionizing particles. To mitigate the effect of pile-up at the HL-LHC the ATLAS and CMS experiments have chosen the LGAD technology for the High Granularity Timing Detector (HGTD) and for the End-Cap Timing Layer (ETL), respectively. A full characterization of recent productions of LGAD sensors fabricated at CNM has been carried out before and after neutron irradiation up to 2.5 $\times$ 10$^{15}$ n$_{eq}$/cm$^{2}$ . Boron-doped sensors produced in epitaxial and Si-on-Si wafers have been studied. The results include their electrically characterization (IV and bias voltage stability) and performance studies (charge and time resolution) for single pad devices with a Sr-90 radioactive source set-up. The behaviour of the Inter-Pad region for irradiated 2 $\times$ 2 LGAD arrays, using the Transient Current Technique (TCT), is shown. The results indicate that the Si-on-Si devices with higher resistivity perform better than the epitaxial ones. △ Less

Submitted 23 September, 2022; originally announced September 2022.

Staggered Scheme for the Compressible Fluctuating Hydrodynamics of Multispecies Fluid Mixtures

Authors: Ishan Srivastava, Daniel R. Ladiges, Andy J. Nonaka, Alejandro L. Garcia, John B. Bell

Abstract: We present a numerical formulation for the solution of non-isothermal, compressible, Navier-Stokes equations with thermal fluctuations to describe mesoscale transport phenomena in multispecies fluid mixtures. The novelty of our numerical method is the use of staggered grid momenta along with a finite volume discretization of the thermodynamic variables to solve the resulting stochastic partial dif… ▽ More We present a numerical formulation for the solution of non-isothermal, compressible, Navier-Stokes equations with thermal fluctuations to describe mesoscale transport phenomena in multispecies fluid mixtures. The novelty of our numerical method is the use of staggered grid momenta along with a finite volume discretization of the thermodynamic variables to solve the resulting stochastic partial differential equations. The key advantages of the numerical scheme are significantly simplified and compact discretization of the diffusive and stochastic momentum fluxes, and an unambiguous prescription of boundary conditions involving pressure. The staggered grid scheme more accurately reproduces the equilibrium static structure factor of hydrodynamic fluctuations in gas mixtures compared to a collocated scheme described previously in Balakrishnan \emph{et al.} [Phys. Rev. E 89, 013017 (2014)]. The numerical method is tested for ideal noble gases mixtures under various nonequilibrium conditions, such as applied thermal and concentration gradients, to assess the role of cross-diffusion effects, such as Soret and Dufour, on the long-ranged correlations of hydrodynamic fluctuations, which are also more accurately reproduced compared to the collocated scheme. We numerically study giant nonequilibrium fluctuations driven by concentration gradients, and fluctuation-driven Rayleigh-Taylor instability in gas mixtures. Wherever applicable, excellent agreement is observed with theory and measurements from the direct simulation Monte Carlo (DSMC) method. △ Less

Submitted 30 January, 2023; v1 submitted 22 September, 2022; originally announced September 2022.

Comments: accepted version; published in Phys. Rev. E

Journal ref: Phys. Rev. E 107, 015305 (2023)

Attosecond metrology of 2D charge distribution in molecules

Authors: V. Loriot, A. Boyer, S. Nandi, C. M. González-Collado, E. Plésiat, A. Marciniak, C. L. Garcia, Y. Hu, M. Lara-Astiaso, A. Palacios, P. Decleva, F. Martín, F. Lépine

Abstract: Photoionization as a half-scattering process is not instantaneous. Usually, time delays in photoionization are of the order of few tens of attoseconds (1 as = 10$^{-18}$ s). While going from a single atom to a nano-object, one can expect the delay to increase since the photoelectron scatters over a larger distance. Here, we show that this is no longer valid in the case of planar systems. Using att… ▽ More Photoionization as a half-scattering process is not instantaneous. Usually, time delays in photoionization are of the order of few tens of attoseconds (1 as = 10$^{-18}$ s). While going from a single atom to a nano-object, one can expect the delay to increase since the photoelectron scatters over a larger distance. Here, we show that this is no longer valid in the case of planar systems. Using attosecond interferometry, we find that the time delay in a 2D carbon-based molecule, naphthalene, is significantly smaller compared to its 3D diamond-like counterpart, adamantane. The measured time delay carries the signature of the spatial distribution of the hole created in the residual molecular cation, allowing us to obtain its dimensions with angstrom accuracy. Our findings offer novel opportunities for tracking and manipulating ultrafast charge transport in molecular materials. △ Less

Submitted 26 February, 2024; v1 submitted 6 September, 2022; originally announced September 2022.

Journal ref: Nature Physics (2024)

Detection schemes for quantum vacuum diffraction and birefringence

Authors: N. Ahmadiniaz, T. E. Cowan, J. Grenzer, S. Franchino-Viñas, A. Laso Garcia, M. Šmíd, T. Toncian, M. A. Trejo, R. Schützhold

Abstract: Motivated by recent experimental initiatives, such as at the Helmholtz International Beamline for Extreme Fields (HIBEF) at the European X-ray Free Electron Laser (XFEL), we calculate the birefringent scattering of x-rays at the combined field of two optical (or near-optical) lasers and compare various scenarios. In order to facilitate an experimental detection of quantum vacuum diffraction and bi… ▽ More Motivated by recent experimental initiatives, such as at the Helmholtz International Beamline for Extreme Fields (HIBEF) at the European X-ray Free Electron Laser (XFEL), we calculate the birefringent scattering of x-rays at the combined field of two optical (or near-optical) lasers and compare various scenarios. In order to facilitate an experimental detection of quantum vacuum diffraction and birefringence, special emphasis is placed on scenarios where the difference between the initial and final x-ray photons is maximized. Apart from their polarization, these signal and background photons may differ in propagation direction (corresponding to scattering angles in the mrad regime) and possibly energy. △ Less

Submitted 20 March, 2023; v1 submitted 28 August, 2022; originally announced August 2022.

Comments: 7 pages, 1 figure

Roadmap for Optical Tweezers

Authors: Giovanni Volpe, Onofrio M. Maragò, Halina Rubinzstein-Dunlop, Giuseppe Pesce, Alexander B. Stilgoe, Giorgio Volpe, Georgiy Tkachenko, Viet Giang Truong, Síle Nic Chormaic, Fatemeh Kalantarifard, Parviz Elahi, Mikael Käll, Agnese Callegari, Manuel I. Marqués, Antonio A. R. Neves, Wendel L. Moreira, Adriana Fontes, Carlos L. Cesar, Rosalba Saija, Abir Saidi, Paul Beck, Jörg S. Eismann, Peter Banzer, Thales F. D. Fernandes, Francesco Pedaci , et al. (58 additional authors not shown)

Abstract: Optical tweezers are tools made of light that enable contactless pushing, trapping, and manipulation of objects ranging from atoms to space light sails. Since the pioneering work by Arthur Ashkin in the 1970s, optical tweezers have evolved into sophisticated instruments and have been employed in a broad range of applications in life sciences, physics, and engineering. These include accurate force… ▽ More Optical tweezers are tools made of light that enable contactless pushing, trapping, and manipulation of objects ranging from atoms to space light sails. Since the pioneering work by Arthur Ashkin in the 1970s, optical tweezers have evolved into sophisticated instruments and have been employed in a broad range of applications in life sciences, physics, and engineering. These include accurate force and torque measurement at the femtonewton level, microrheology of complex fluids, single micro- and nanoparticle spectroscopy, single-cell analysis, and statistical-physics experiments. This roadmap provides insights into current investigations involving optical forces and optical tweezers from their theoretical foundations to designs and setups. It also offers perspectives for applications to a wide range of research fields, from biophysics to space exploration. △ Less

Submitted 28 June, 2022; originally announced June 2022.

Comments: 181 pages, 61 figures

Modeling Electrokinetic Flows with the Discrete Ion Stochastic Continuum Overdamped Solvent Algorithm

Authors: Daniel R. Ladiges, Jailun G. Wang, Ishan Srivastava, Sean P. Carney, Andrew Nonaka, Alejandro L. Garcia, Aleksander Donev, John B. Bell

Abstract: In this article we develop an algorithm for the efficient simulation of electrolytes in the presence of physical boundaries. In previous work the Discrete Ion Stochastic Continuum Overdamped Solvent (DISCOS) algorithm was derived for triply periodic domains, and was validated through ion-ion pair correlation functions and Debye-H{ü}ckel-Onsager theory for conductivity, including the Wien effect fo… ▽ More In this article we develop an algorithm for the efficient simulation of electrolytes in the presence of physical boundaries. In previous work the Discrete Ion Stochastic Continuum Overdamped Solvent (DISCOS) algorithm was derived for triply periodic domains, and was validated through ion-ion pair correlation functions and Debye-H{ü}ckel-Onsager theory for conductivity, including the Wien effect for strong electric fields. In extending this approach to include an accurate treatment of physical boundaries we must address several important issues. First, the modifications to the spreading and interpolation operators necessary to incorporate interactions of the ions with the boundary are described. Next we discuss the modifications to the electrostatic solver to handle the influence of charges near either a fixed potential or dielectric boundary. An additional short-ranged potential is also introduced to represent interaction of the ions with a solid wall. Finally, the dry diffusion term is modified to account for the reduced mobility of ions near a boundary, which introduces an additional stochastic drift correction. Several validation tests are presented confirming the correct equilibrium distribution of ions in a channel. Additionally, the methodology is demonstrated using electro-osmosis and induced charge electro-osmosis, with comparison made to theory and other numerical methods. Notably, the DISCOS approach achieves greater accuracy than a continuum electrostatic simulation method. We also examine the effect of under-resolving hydrodynamic effects using a `dry diffusion' approach, and find that considerable computational speedup can be achieved with a negligible impact on accuracy. △ Less

Submitted 11 July, 2022; v1 submitted 29 April, 2022; originally announced April 2022.

Comments: 27 pages, 15 figures

Journal ref: Phys. Rev. E 106, 035104 (2022)

Rate capability of large-area triple-GEM detectors and new foil design for the innermost station, ME0, of the CMS endcap muon system

Authors: Michele Bianco, Francesco Fallavollita, Davide Fiorina, Antonello Pellecchia, Luis Felipe Ramirez Garcia, Nicole Rosi, Piet Verwilligen

Abstract: To extend the acceptance of the CMS muon spectrometer to the region 2.4 $<|η|<$ 2.8, stacks of triple-GEM chambers, forming the ME0 station, are planned for the CMS Phase 2 Upgrade. These large-area micro-pattern gaseous detectors must operate in a challenging environment with expected background particle fluxes up to 150 kHz/cm$^2$. Unlike traditional non-resistive gaseous detectors, the rate cap… ▽ More To extend the acceptance of the CMS muon spectrometer to the region 2.4 $<|η|<$ 2.8, stacks of triple-GEM chambers, forming the ME0 station, are planned for the CMS Phase 2 Upgrade. These large-area micro-pattern gaseous detectors must operate in a challenging environment with expected background particle fluxes up to 150 kHz/cm$^2$. Unlike traditional non-resistive gaseous detectors, the rate capability of such triple-GEM detectors is limited not by space charge effects, but by voltage drops on the chamber electrodes due to avalanche-induced currents flowing through the resistive protection circuits (introduced as discharge quenchers). We present a study of the irradiation of large-area triple-GEM detectors with moderate fluxes to obtain a high integrated hit rate. The results show drops as high as 40% of the nominal detector gas gain, which would result in severe loss of tracking efficiency. We discuss possible mitigation strategies leading to a new design for the GEM foils with electrode segmentation in the radial direction, instead of the "traditional" transverse segmentation. The advantages of the new design include uniform hit rate across different sectors, minimization of gain-loss without the need for voltage compensation, and independence of detector gain on background flux shape. △ Less

Submitted 22 January, 2022; originally announced January 2022.

Theoretical analysis of the saturation phase of the $1/1$ energetic-ion-driven resistive interchange mode

Authors: J. Varela, D. A. Spong, L. Garcia, S. Ohdachi, K. Y. Watanabe, R. Seki, Y. Ghai

Abstract: The aim of the present study is to analyze the saturation regime of the energetic-ion-driven resistive interchange mode (EIC) in the LHD plasma. A set of non linear simulations are performed by the FAR3d code that uses a reduced MHD model for the thermal plasma coupled with a gyrofluid model for the energetic particles (EP) species. The hellically trapped EP component is introduced through a modif… ▽ More The aim of the present study is to analyze the saturation regime of the energetic-ion-driven resistive interchange mode (EIC) in the LHD plasma. A set of non linear simulations are performed by the FAR3d code that uses a reduced MHD model for the thermal plasma coupled with a gyrofluid model for the energetic particles (EP) species. The hellically trapped EP component is introduced through a modification of the averaged drift velocity operator to include their precessional drift. The non linear simulation results show similar 1/1 EIC saturation phases with respect to the experimental observations, reproducing the enhancement of the n/m = 1/1 resistive interchange modes (RIC) amplitude and width as the EP $β$ increases, the EP beta threshold for the 1/1 EIC excitation, the further destabilization of the 1/1 EIC as the population of the helically trapped EP increases and the triggering of burst events. The frequency of the 1/1 EIC calculated during the burst event is 9.4 kHz and the 2/2 and 3/3 overtones are destabilized, consistent with the frequency range and the complex mode structure measured in the experiment. In addition, the simulation shows the inward propagation of the 1/1 EIC due to the non linear destabilization of the 3/4 and 2/3 EPMs, leading to the partial overlapping between resonances during the burst event. Finally, the analysis of the 1/1 EIC stabilization phase shows the excitation of the 1/1 RIC as soon as the flattening induced by the 1/1 EIC in the pressure profile vanishes, leading to the retrieval of the pressure gradient at the plasma periphery and the overcoming of the RIC stability limit. △ Less

Submitted 3 January, 2022; originally announced January 2022.

Comments: arXiv admin note: text overlap with arXiv:2010.04598

Journal ref: Nucl. Fusion, 61, 126016 (2021)

High intensity proton beam impact at 440 GeV/c on Mo and Cu coated CfC/graphite and SiC/SiC absorbers for beam intercepting devices

Authors: Jorge Maestre, Cristina Bahamonde, Inigo Lamas Garcia, Keith Kershaw, Nicolo Biancacci, Josep Busom, Matthias Frankl, Anton Lechner, Adnan Kurtulus, Shunsuke Makimura, Naofumi Nakazato, Ana Teresa Perez, Antonio Perillo-Marcone, Benoit Salvant, Regis Seidenbinder, Lorenzo Teofili, Marco Calviani

Abstract: Beam Intercepting Devices (BIDs) are essential protection elements for the operation of the Large Hadron Collider (LHC) complex. The LHC internal beam dump (LHC Target Dump Injection or LHC TDI) is the main protection BID of the LHC injection system; its main function is to protect LHC equipment in the event of a malfunction of the injection kicker magnets during beam transfer from the SPS to the… ▽ More Beam Intercepting Devices (BIDs) are essential protection elements for the operation of the Large Hadron Collider (LHC) complex. The LHC internal beam dump (LHC Target Dump Injection or LHC TDI) is the main protection BID of the LHC injection system; its main function is to protect LHC equipment in the event of a malfunction of the injection kicker magnets during beam transfer from the SPS to the LHC. Several issues with the TDI were encountered during LHC operation, most of them due to outgassing from its core components induced by electron cloud effects, which led to limitations of the injector intensity and hence had an impact on LHC availability. The absorbing cores of the TDIs, and of beam intercepting devices in general, need to deal with high thermo-mechanical loads induced by the high intensity particle beams. In addition, devices such as the TDI - where the absorbing materials are installed close to the beam, are important contributors to the accelerator impedance budget. To reduce impedance, the absorbing materials that make up the core must be typically coated with high electrical conductivity metals. Beam impact testing of the coated absorbers is a crucial element of development work to ensure their correct operation. The behaviour of several metal-coated absorber materials was investigated when exposed to high intensity and high energy proton beams in the HiRadMat facility at CERN. Different coating configurations based on copper and molybdenum, and absorbing materials such as isostatic graphite, Carbon Fibre Composite (CfC) and Silicon Carbide reinforced with Silicon Carbide fibres (SiC-SiC), were tested in the facility to assess the TDI's performance and to extract information for other BIDs using these materials. In addition to beam impact tests and an extensive Post Irradiation Examination (PIE) campaign, extensive numerical simulations were carried out. △ Less

Submitted 22 December, 2021; v1 submitted 9 December, 2021; originally announced December 2021.

Comments: 32 pages, 25 figures, accepted for publication in Journal of Instrumentation (JINST)

Journal ref: Journal of Instrumentation (JINST) 2022 17 P01019

Comprehensive technology study of radiation hard LGADs

Authors: E. L. Gkougkousis, L. Castillo Garcia, S. Grinstein, V. Coco

Abstract: Towards radiation tolerant sensors for pico-second timing, several dopants are explored. Using a common mask, CNM produced LGADs with boron, boron + carbon and gallium implanted gain layers are studied under neutron and proton irradiation. With fluences ranging from $10^{14}$ to $6\times 10^{15} n_{eq}/cm^{2}$ on both particle species, reported results focus on acceptor removal and gain reduction… ▽ More Towards radiation tolerant sensors for pico-second timing, several dopants are explored. Using a common mask, CNM produced LGADs with boron, boron + carbon and gallium implanted gain layers are studied under neutron and proton irradiation. With fluences ranging from $10^{14}$ to $6\times 10^{15} n_{eq}/cm^{2}$ on both particle species, reported results focus on acceptor removal and gain reduction via electrical characterization. Timing performance, charge collection, gain and relative efficiency are treated through charged particle measurements, including signal analysis and noise characterization. An accent is placed on stability, via dark rate and operating voltage studies while, radiation related gain reduction mechanisms are examined comparing gain estimations through different approaches. △ Less

Submitted 17 September, 2022; v1 submitted 12 November, 2021; originally announced November 2021.

Comments: TIPP2021 Conference Proceedings, May 27th 2021

Journal ref: 2022 J. Phys.: Conf. Ser. 2374 012175

Thermal Fluctuations in the Dissipation Range of Homogeneous Isotropic Turbulence

Authors: John B. Bell, Andrew Nonaka, Alejandro L. Garcia, Gregory Eyink

Abstract: Using fluctuating hydrodynamics we investigate the effect of thermal fluctuations in the dissipation range of homogeneous, isotropic turbulence. Simulations confirm theoretical predictions that the energy spectrum is dominated by these fluctuations at length scales comparable to the Kolmogorov length. We also find that the extreme intermittency in the far-dissipation range predicted by Kraichnan i… ▽ More Using fluctuating hydrodynamics we investigate the effect of thermal fluctuations in the dissipation range of homogeneous, isotropic turbulence. Simulations confirm theoretical predictions that the energy spectrum is dominated by these fluctuations at length scales comparable to the Kolmogorov length. We also find that the extreme intermittency in the far-dissipation range predicted by Kraichnan is replaced by Gaussian thermal equipartition. △ Less

Submitted 17 September, 2021; originally announced September 2021.

MSC Class: 76F02

Nonlinear Inverse Compton Scattering from a Laser Wakefield Accelerator and Plasma Mirror

Authors: A. Hannasch, M. LaBerge, R. Zgadzaj, J. P. Couperus Cabadağ, A. Laso Garcia, T. Kurz, T. Cowan, U. Schramm, A. Irman, M. C. Downer

Abstract: We generate inverse Compton scattered X-rays in both linear and nonlinear regimes with a 250 MeV laser wakefield electron accelerator and plasma mirror by retro-reflecting the unused drive laser light to scatter from the accelerated electrons. We characterize the X-rays using a CsI(Tl) voxelated scintillator that measures their total energy and divergence as a function of plasma mirror distance fr… ▽ More We generate inverse Compton scattered X-rays in both linear and nonlinear regimes with a 250 MeV laser wakefield electron accelerator and plasma mirror by retro-reflecting the unused drive laser light to scatter from the accelerated electrons. We characterize the X-rays using a CsI(Tl) voxelated scintillator that measures their total energy and divergence as a function of plasma mirror distance from the accelerator exit. At each plasma mirror position, these X-ray properties are correlated with the measured fluence and inferred intensity of the laser pulse after driving the accelerator to determine the laser strength parameter $a_0$. The results show that ICS X-rays are generated at $a_0$ ranging from $0.3\pm0.1$ to $1.65\pm0.25$, and exceed the strength of co-propagating bremsstrahlung and betatron X-rays at least ten-fold throughout this range of $a_0$. △ Less

Submitted 30 June, 2021; originally announced July 2021.

Comments: Proceedings of the Advanced Accelerator Concepts Seminar Series 2020

Compact Spectral Characterization of 5-500 MeV X-rays from the Texas Petawatt Laser-Driven Plasma Accelerator

Authors: A. Hannasch, L. Lisi, J. Brooks, X. Cheng, A. Laso Garcia, M. LaBerge, I. Pagano, B. Bowers, R. Zgadzaj, H. J. Quevedo, M. Spinks, M. E. Donovan, T. Cowan, M. C. Downer

Abstract: We reconstruct spectra of secondary x-rays generated from a 500 MeV - 2 GeV laser plasma electron accelerator. A compact (7.5 $\times$ 7.5 $\times$ 15 cm), modular x-ray calorimeter made of alternating layers of absorbing materials and imaging plates records the single-shot x-ray depth-energy distribution. X-rays range from few-MeV inverse Compton scattered x-rays to $\sim$100 MeV average bremsstr… ▽ More We reconstruct spectra of secondary x-rays generated from a 500 MeV - 2 GeV laser plasma electron accelerator. A compact (7.5 $\times$ 7.5 $\times$ 15 cm), modular x-ray calorimeter made of alternating layers of absorbing materials and imaging plates records the single-shot x-ray depth-energy distribution. X-rays range from few-MeV inverse Compton scattered x-rays to $\sim$100 MeV average bremsstrahlung energies and are characterized individually by the same calorimeter detector. Geant4 simulations of energy deposition from mono-energetic x-rays in the stack generate an energy-vs-depth response matrix for the given stack configuration. A fast, iterative reconstruction algorithm based on analytic models of inverse Compton scattering and bremsstrahlung photon energy distributions then unfolds x-ray spectra in $\sim10$ seconds. △ Less

Submitted 30 June, 2021; originally announced July 2021.

Comments: Proceedings of the Advanced Accelerator Concepts Seminar Series 2020

Relativistically transparent magnetic filaments: scaling laws, initial results and prospects for strong-field QED studies

Authors: H. G. Rinderknecht, T. Wang, A. Laso Garcia, G. Bruhaug, M. S. Wei, H. J. Quevedo, T. Ditmire, J. Williams, A. Haid, D. Doria, K. Spohr, T. Toncian, A. Arefiev

Abstract: Relativistic transparency enables volumetric laser interaction with overdense plasmas and direct laser acceleration of electrons to relativistic velocities. The dense electron current generates a magnetic filament with field strength of the order of the laser amplitude ($>$10$^5$ T). The magnetic filament traps the electrons radially, enabling efficient acceleration and conversion of laser energy… ▽ More Relativistic transparency enables volumetric laser interaction with overdense plasmas and direct laser acceleration of electrons to relativistic velocities. The dense electron current generates a magnetic filament with field strength of the order of the laser amplitude ($>$10$^5$ T). The magnetic filament traps the electrons radially, enabling efficient acceleration and conversion of laser energy into MeV photons by electron oscillations in the filament. The use of microstructured targets stabilizes the hosing instabilities associated with relativistically transparent interactions, resulting in robust and repeatable production of this phenomenon. Analytical scaling laws are derived to describe the radiated photon spectrum and energy from the magnetic filament phenomenon in terms of the laser intensity, focal radius, pulse duration, and the plasma density. These scaling laws are compared to 3-D particle-in-cell (PIC) simulations, demonstrating agreement over two regimes of focal radius. Preliminary experiments to study this phenomenon at moderate intensity ($a_0 \sim 30$) were performed on the Texas Petawatt Laser. Experimental signatures of the magnetic filament phenomenon are observed in the electron and photon spectra recorded in a subset of these experiments that is consistent with the experimental design, analytical scaling and 3-D PIC simulations. Implications for future experimental campaigns are discussed. △ Less

Submitted 4 June, 2021; originally announced June 2021.

Comments: Submitted to New Journal of Physics

Study of the Alfven Eigenmodes stability in CFQS plasma using a Landau closure model

Authors: J. Varela, A. Shimizu, D. A. Spong, L. Garcia, Y. Ghai

Abstract: The aim of this study is to analyze the stability of the Alfven eigenmodes (AE) in the Chinese First Quasi-axisymmetric Stellarator (CFQS). The AE stability is calculated using the code FAR3d that solves the reduced MHD equations to describe the linear evolution of the poloidal flux and the toroidal component of the vorticity in a full 3D system, coupled with equations of density and parallel velo… ▽ More The aim of this study is to analyze the stability of the Alfven eigenmodes (AE) in the Chinese First Quasi-axisymmetric Stellarator (CFQS). The AE stability is calculated using the code FAR3d that solves the reduced MHD equations to describe the linear evolution of the poloidal flux and the toroidal component of the vorticity in a full 3D system, coupled with equations of density and parallel velocity moment for the energetic particles (EP) species including the effect of the helical couplings and acoustic modes. The Landau damping and resonant destabilization effects are added in the model by a given closure relation. The simulation results indicate the destabilization of n = 1 to 4 AEs by EP during the slowing down process, particularly n = 1 and n = 2 toroidal AEs (TAE), n = 3 elliptical AE (EAE) and n = 4 non circular AE (NAE). If the resonance is caused by EPs with an energy above 17 keV (weakly thermalized EP), n = 2 EAEs and n = 3 NAEs are unstable. On the other hand, EPs with an energy below 17 keV (late thermalization stage) lead to the destabilization of n = 3 and n = 4 TAEs. The simulations for an off-axis NBI injection indicate the further destabilization of n = 2 to 4 AEs although the growth rate of the n = 1 AEs slightly decreases, so no clear optimization trend with respect to the NBI deposition region is identified. In addition, n = 2, 4 helical AE (HAE) are unstable above an EP \b{eta} threshold. Also, if the thermal \b{eta} of the simulation increases (higher thermal plasma density) the AE stability of the plasma improves. The simulations including the effect of the finite Larmor radius and electron-ion Landau damping show the stabilization of the n = 1 to 4 EAE/NAEs as well as a decrease of the growth rate and frequency of the n = 1 to 4 BAE/TAEs. △ Less

Submitted 16 April, 2021; originally announced April 2021.

Journal ref: Nucl. Fusion, 61, 026023 (2021)

Compact Spectroscopy of keV to MeV X-rays from a Laser Wakefield Accelerator

Authors: A. Hannasch, A. Laso Garcia, M. LaBerge, R. Zgadzaj, A. Koehler, J. P. Couperus Cabadag, O. Zarini, T. Kurz, A. Ferrari, M. Molodtsova, L. Naumann, T. Cowan, U. Schramm, A. Irman, M. C. Downer

Abstract: We reconstruct spectra of secondary X-rays from a tunable 250-350 MeV laser wakefield electron accelerator from single-shot X-ray depth-energy measurements in a compact (7.5 $\times$ 7.5 $\times$ 15 cm), modular X-ray calorimeter made of alternating layers of absorbing materials and imaging plates. X-rays range from few-keV betatron to few-MeV inverse Compton to >100 MeV bremsstrahlung emission, a… ▽ More We reconstruct spectra of secondary X-rays from a tunable 250-350 MeV laser wakefield electron accelerator from single-shot X-ray depth-energy measurements in a compact (7.5 $\times$ 7.5 $\times$ 15 cm), modular X-ray calorimeter made of alternating layers of absorbing materials and imaging plates. X-rays range from few-keV betatron to few-MeV inverse Compton to >100 MeV bremsstrahlung emission, and are characterized both individually and in mixtures. Geant4 simulations of energy deposition of single-energy X-rays in the stack generate an energy-vs-depth response matrix for a given stack configuration. An iterative reconstruction algorithm based on analytic models of betatron, inverse Compton and bremsstrahlung photon energy distributions then unfolds X-ray spectra, typically within a minute. We discuss uncertainties, limitations and extensions of both measurement and reconstruction methods. △ Less

Submitted 1 March, 2021; originally announced March 2021.

Journal ref: Sci Rep 11, 14368 (2021)

Probing ultrafast laser plasma processes inside solids with resonant small-angle X-ray scattering

Authors: Lennart Gaus, Lothar Bischoff, Michael Bussmann, Eric Cunningham, Chandra B. Curry, Eric Galtier, Maxence Gauthier, Alejandro Laso García, Marco Garten, Siegfried Glenzer, Jörg Grenzer, Christian Gutt, Nicholas J. Hartley, Lingen Huang, Uwe Hübner, Dominik Kraus, Hae Ja Lee, Emma E. McBride, Josefine Metzkes-Ng, Bob Nagler, Motoaki Nakatsutsumi, Jan Nikl, Masato Ota, Alexander Pelka, Irene Prencipe , et al. (11 additional authors not shown)

Abstract: Extreme states of matter exist throughout the universe e.g. inside planetary cores, stars or astrophysical jets. Such conditions are generated in the laboratory in the interaction of powerful lasers with solids, and their evolution can be probed with femtosecond precision using ultra-short X-ray pulses to study laboratory astrophysics, laser-fusion research or compact particle acceleration. X-ray… ▽ More Extreme states of matter exist throughout the universe e.g. inside planetary cores, stars or astrophysical jets. Such conditions are generated in the laboratory in the interaction of powerful lasers with solids, and their evolution can be probed with femtosecond precision using ultra-short X-ray pulses to study laboratory astrophysics, laser-fusion research or compact particle acceleration. X-ray scattering (SAXS) patterns and their asymmetries occurring at X-ray energies of atomic bound-bound transitions contain information on the volumetric nanoscopic distribution of density, ionization and temperature. Buried heavy ion structures in high intensity laser irradiated solids expand on the nanometer scale following heat diffusion, and are heated to more than 2 million Kelvin. These experiments demonstrate resonant SAXS with the aim to better characterize dynamic processes in extreme laboratory plasmas. △ Less

Submitted 14 December, 2020; originally announced December 2020.

Theoretical analysis of energetic-ion-driven resistive interchange mode stabilization strategies using a Landau closure model

Authors: J. Varela, S. Ohdachi, K. Y. Watanabe, D. A. Spong, L. Garcia, R. Seki

Abstract: The aim of the present study is to perform a theoretical analysis of different strategies to stabilize energetic-ion-driven resistive interchange mode (EIC) in LHD plasma. We use a reduced MHD for the thermal plasma coupled with a gyrofluid model for the energetic particles (EP) species. The hellically trapped EP component is introduced through a modification of the drift frequency to include thei… ▽ More The aim of the present study is to perform a theoretical analysis of different strategies to stabilize energetic-ion-driven resistive interchange mode (EIC) in LHD plasma. We use a reduced MHD for the thermal plasma coupled with a gyrofluid model for the energetic particles (EP) species. The hellically trapped EP component is introduced through a modification of the drift frequency to include their precessional drift. The stabilization trends of the 1/1 EIC observed experimentally with respect to the thermal plasma density and temperature are reproduced by the simulations, showing a reasonable agreement with the data. The LHD operation scenarios with stable 1/1 EIC are identified, leading to the stabilization of the 1/1 EIC if the thermal plasma density and temperature are above a given threshold. The 1/1 EIC are also stabilized if the rotational transform is modified in a way that the 1/1 rational surface is located further away than 0.9 times the normalized radius, or the magnetic shear in the plasma periphery is enhanced. Also, LHD discharges with large magnetic fields show a higher EIC destabilization threshold with respect to the thermal plasma density. If the perpendicular NBI deposition region is moved further inward than 0.875 times the normalized radius the 1/1 EIC are also stabilized. In addition, increasing the perpendicular NBI voltage such that the EP energy is higher than 30 keV stabilizes the 1/1 EIC. Moreover, Deuterium plasmas show a higher stability threshold for the 1/1 EIC than Hydrogen plasmas. The experimental data shows a larger time interval between EIC events as the power of the tangential NBI is increased providing that the perpendicular NBI power is at least 13 MW. This implies a stabilizing effect of the tangential NBI. △ Less

Submitted 8 October, 2020; originally announced October 2020.

Comments: arXiv admin note: text overlap with arXiv:1904.01964

Modeling of the ECCD injection effect on the Heliotron J and LHD plasma stability

Authors: J. Varela, K. Nagasaki, K. Nagaoka, S. Yamamoto, K. Y. Watanabe, D. A. Spong, L. Garcia, A. Cappa, A. Azegami

Abstract: The aim of the study is to analyze the stability of the Energetic Particle Modes (EPM) and Alfven Eigenmodes (AE) in Helitron J and LHD plasma if the electron cyclotron current drive (ECCD) is applied. The analysis is performed using the code FAR3d that solves the reduced MHD equations describing the linear evolution of the poloidal flux and the toroidal component of the vorticity in a full 3D sys… ▽ More The aim of the study is to analyze the stability of the Energetic Particle Modes (EPM) and Alfven Eigenmodes (AE) in Helitron J and LHD plasma if the electron cyclotron current drive (ECCD) is applied. The analysis is performed using the code FAR3d that solves the reduced MHD equations describing the linear evolution of the poloidal flux and the toroidal component of the vorticity in a full 3D system, coupled with equations of density and parallel velocity moments for the energetic particle (EP) species, including the effect of the acoustic modes. The Landau damping and resonant destabilization effects are added via the closure relation. The simulation results show that the n=1 EPM and n=2 Global AE (GAE) in Heliotron J plasma can be stabilized if the magnetic shear is enhanced at the plasma periphery by an increase (co-ECCD injection) or decrease (ctr-ECCD injection) of the rotational transform at the magnetic axis iota0. In the ctr-ECCD simulations, the EPM/AE growth rate decreases only below a given iota0, similar to the ECCD intensity threshold observed in the experiments. In addition, ctr-ECCD simulations show an enhancement of the continuum damping. The simulations of the LHD discharges with ctr-ECCD injection indicate the stabilization of the n=1 EPM, n=2 Toroidal AE (TAE) and n=3 TAE, caused by an enhancement of the continuum damping in the inner plasma leading to a higher EP beta threshold with respect to the co- and no-ECCD simulations. △ Less

Submitted 8 October, 2020; originally announced October 2020.

Journal ref: Nucl. Fusion 60 112015 (2020)

MHD stability of JT-60SA operation scenarios driven by passing energetic particles for a hot Maxwellian model

Authors: J. Varela, K. Y. Watanabe, K. Shinohara, M. Honda, Y. Suzuki, J. Shiraishi, D. A. Spong, L. Garcia

Abstract: We analyze the effects of the passing energetic particles on the resistive ballooning modes (RBM) and the energetic particle driven modes in JT-60SA plasma, which leads to the prediction of the stability in N-NBI heated plasma. The analysis is performed using the code FAR3d that solves the reduced MHD equations describing the linear evolution of the poloidal flux and the toroidal component of the… ▽ More We analyze the effects of the passing energetic particles on the resistive ballooning modes (RBM) and the energetic particle driven modes in JT-60SA plasma, which leads to the prediction of the stability in N-NBI heated plasma. The analysis is performed using the code FAR3d that solves the reduced MHD equations describing the linear evolution of the poloidal flux and the toroidal component of the vorticity in a full 3D system, coupled with equations of density and parallel velocity moments for the energetic particle (EP) species assuming an averaged Maxwellian EP distribution fitted to the slowing down distribution, including the effect of the acoustic modes. The simulations show the possible destabilization of a 3/2-4/2 TAE with a frequency (f) of 115 kHz, a 6/4-7/4 TAE with f=98 kHz and a 6/4 or 7/4 BAE with f=57 kHz in the ITER-like inductive scenario. If the energetic particle beta increases, Beta induced AEs (BAE), Toroidal AEs (TAE) and Elliptical AEs (EAE) are destabilized between the inner-middle plasma region, leading to the overlapping of AE of different toroidal families. If these instabilities coexist in the non-linear saturation phase the EP transport could be enhanced leading to a lower heating efficiency. For a hypothetical configuration based on the ITER-like inductive scenario but an center peaked EP profile, the EP beta threshold increases and several BAEs are destabilized in the inner plasma region, indicating an improved AE stability with respect to the off-axis peaked EP profile. In addition, the analysis of a hypothetical JT-60SA scenario with a resonant q=1 in the inner plasma region shows the destabilization of fishbones-like instabilities by the off-axis peaked EP profile. Also, the EPs have an stabilizing effect on the RBM, stronger as the population of EP with low energies (below 250 keV) increases at the plasma pedestal. △ Less

Submitted 8 October, 2020; originally announced October 2020.

Journal ref: Nucl. Fusion 60 096009 (2020)

Bremsstrahlung emission and plasma characterization driven by moderately relativistic laser-plasma interactions

Authors: Sushil Singh, Chris D. Armstrong, Ning Kang, Lei Ren, Huiya Liu, Neng Hua, Dean R. Rusby, Ondřej Klimo, Roberto Versaci, Yan Zhang, Mingying Sun, Baoqiang Zhu, Anle Lei, Xiaoping Ouyang, Livia Lancia, Alejandro Laso Garcia, Andreas Wagner, Thomas Cowan, Jianqiang Zhu, Theodor Schlegel, Stefan Weber, Paul McKenna, David Neely, Vladimir Tikhonchuk, Deepak Kumar

Abstract: Relativistic electrons generated by the interaction of petawatt-class short laser pulses with solid targets can be used to generate bright X-rays via bremsstrahlung. The efficiency of laser energy transfer into these electrons depends on multiple parameters including the focused intensity and pre-plasma level. This paper reports experimental results from the interaction of a high intensity petawat… ▽ More Relativistic electrons generated by the interaction of petawatt-class short laser pulses with solid targets can be used to generate bright X-rays via bremsstrahlung. The efficiency of laser energy transfer into these electrons depends on multiple parameters including the focused intensity and pre-plasma level. This paper reports experimental results from the interaction of a high intensity petawatt-class glass laser pulses with solid targets at a maximum intensity of $10^{19}$ W/cm$^2$. In-situ measurements of specularly reflected light are used to provide an upper bound of laser absorption and to characterize focused laser intensity, the pre-plasma level and the generation mechanism of second harmonic light. The measured spectrum of electrons and bremsstrahlung radiation provide information about the efficiency of laser energy transfer. △ Less

Submitted 25 September, 2020; originally announced September 2020.

A Discrete Ion Stochastic Continuum Overdamped Solvent Algorithm for Modeling Electrolytes

Authors: Daniel R. Ladiges, Sean P. Carney, Andrew Nonaka, Katherine Klymko, Guy C. Moore, Alejandro L. Garcia, Sachin R. Natesh, Aleksandar Donev, John B. Bell

Abstract: In this paper we develop a methodology for the mesoscale simulation of strong electrolytes. The methodology is an extension of the Fluctuating Immersed Boundary (FIB) approach that treats a solute as discrete Lagrangian particles that interact with Eulerian hydrodynamic and electrostatic fields. In both cases the Immersed Boundary (IB) method of Peskin is used for particle-field coupling. Hydrodyn… ▽ More In this paper we develop a methodology for the mesoscale simulation of strong electrolytes. The methodology is an extension of the Fluctuating Immersed Boundary (FIB) approach that treats a solute as discrete Lagrangian particles that interact with Eulerian hydrodynamic and electrostatic fields. In both cases the Immersed Boundary (IB) method of Peskin is used for particle-field coupling. Hydrodynamic interactions are taken to be overdamped, with thermal noise incorporated using the fluctuating Stokes equation, including a "dry diffusion" Brownian motion to account for scales not resolved by the coarse-grained model of the solvent. Long range electrostatic interactions are computed by solving the Poisson equation, with short range corrections included using a novel immersed-boundary variant of the classical Particle-Particle Particle-Mesh (P3M) technique. Also included is a short range repulsive force based on the Weeks-Chandler-Andersen (WCA) potential. The new methodology is validated by comparison to Debye-H{ü}ckel theory for ion-ion pair correlation functions, and Debye-H{ü}ckel-Onsager theory for conductivity, including the Wein effect for strong electric fields. In each case good agreement is observed, provided that hydrodynamic interactions at the typical ion-ion separation are resolved by the fluid grid. △ Less

Submitted 22 March, 2021; v1 submitted 6 July, 2020; originally announced July 2020.

Comments: 30 pages, 12 figures, 2 tables

Journal ref: Phys. Rev. Fluids 6, 044309 (2021)

Phase space learning with neural networks

Authors: Jaime Lopez Garcia, Angel Rivero Jimenez

Abstract: This work proposes an autoencoder neural network as a non-linear generalization of projection-based methods for solving Partial Differential Equations (PDEs). The proposed deep learning architecture presented is capable of generating the dynamics of PDEs by integrating them completely in a very reduced latent space without intermediate reconstructions, to then decode the latent solution back to th… ▽ More This work proposes an autoencoder neural network as a non-linear generalization of projection-based methods for solving Partial Differential Equations (PDEs). The proposed deep learning architecture presented is capable of generating the dynamics of PDEs by integrating them completely in a very reduced latent space without intermediate reconstructions, to then decode the latent solution back to the original space. The learned latent trajectories are represented and their physical plausibility is analyzed. It is shown the reliability of properly regularized neural networks to learn the global characteristics of a dynamical system's phase space from the sample data of a single path, as well as its ability to predict unseen bifurcations. △ Less

Submitted 22 June, 2020; originally announced June 2020.

The Upgrade I of LHCb VELO -- towards an intelligent monitoring platform

Authors: P. Kopciewicz, T. Szumlak, M. Majewski, K. Akiba, O. Augusto, J. Back, D. S. Bobulska, G. Bogdanova, S. Borghi, T. Bowcock, J. Buytaert, E. Lemos Cid, V. Coco, P. Collins, E. Dall'Occo, K. de Bruyn, S. de Capua, F. Dettori, K. Dreimanis, D. Dutta, L. Eklund, T. Evans, M. Ferro-Luzzi W. Funk, L. Meyer Garcia, O. Boente García , et al. (41 additional authors not shown)

Abstract: The Large Hadron Collider beauty (LHCb) detector is designed to detect decays of b- and c- hadrons for the study of CP violation and rare decays. At the end of the LHC Run 2, many of the LHCb measurements remained statistically dominated. In order to increase the trigger yield for purely hadronic channels, the hardware trigger will be removed, and the detector will be read out at 40 MHz. This, in… ▽ More The Large Hadron Collider beauty (LHCb) detector is designed to detect decays of b- and c- hadrons for the study of CP violation and rare decays. At the end of the LHC Run 2, many of the LHCb measurements remained statistically dominated. In order to increase the trigger yield for purely hadronic channels, the hardware trigger will be removed, and the detector will be read out at 40 MHz. This, in combination with the five-fold increase in luminosity, requires radical changes to LHCb's electronics, and, in some cases, the replacement of entire sub-detectors with state-of-the-art detector technologies. The Vertex Locator (VELO) surrounding the interaction region is used to reconstruct the collision points (primary vertices) and decay vertices of long-lived particles (secondary vertices). The upgraded VELO will be composed of 52 modules placed along the beam axis divided into two retractable halves. The modules will each be equipped with 4 silicon hybrid pixel tiles, each read out by 3 VeloPix ASICs. The total output data rate anticipated for the whole detector will be around 1.6 Tbit/s. The highest occupancy ASICs will have pixel hit rates of approximately 900 Mhit/s, with the corresponding output data rate of 15 Gbit/s. The LHCb upgrade detector will be the first detector to read out at the full LHC rate of 40 MHz. The VELO upgrade will utilize the latest detector technologies to read out at this rate while maintaining the required radiation-hard profile and minimizing the detector material. △ Less

Submitted 22 July, 2022; v1 submitted 16 June, 2020; originally announced June 2020.

Journal ref: Journal of Instrumentation (JINST), Volume 15, June 2020

Beam test results of IHEP-NDL Low Gain Avalanche Detectors(LGAD)

Authors: S. Xiao, S. Alderweireldt, S. Ali, C. Allaire, C. Agapopoulou, N. Atanov, M. K. Ayoub, G. Barone, D. Benchekroun, A. Buzatu, D. Caforio, L. Castillo García, Y. Chan, H. Chen, V. Cindro, L. Ciucu, J. Barreiro Guimarães da Costa, H. Cui, F. Davó Miralles, Y. Davydov, G. d'Amen, C. de la Taille, R. Kiuchi, Y. Fan, A. Falou , et al. (75 additional authors not shown)

Abstract: To meet the timing resolution requirement of up-coming High Luminosity LHC (HL-LHC), a new detector based on the Low-Gain Avalanche Detector(LGAD), High-Granularity Timing Detector (HGTD), is under intensive research in ATLAS. Two types of IHEP-NDL LGADs(BV60 and BV170) for this update is being developed by Institute of High Energy Physics (IHEP) of Chinese Academic of Sciences (CAS) cooperated wi… ▽ More To meet the timing resolution requirement of up-coming High Luminosity LHC (HL-LHC), a new detector based on the Low-Gain Avalanche Detector(LGAD), High-Granularity Timing Detector (HGTD), is under intensive research in ATLAS. Two types of IHEP-NDL LGADs(BV60 and BV170) for this update is being developed by Institute of High Energy Physics (IHEP) of Chinese Academic of Sciences (CAS) cooperated with Novel Device Laboratory (NDL) of Beijing Normal University and they are now under detailed study. These detectors are tested with $5GeV$ electron beam at DESY. A SiPM detector is chosen as a reference detector to get the timing resolution of LGADs. The fluctuation of time difference between LGAD and SiPM is extracted by fitting with a Gaussian function. Constant fraction discriminator (CFD) method is used to mitigate the effect of time walk. The timing resolution of $41 \pm 1 ps$ and $63 \pm 1 ps$ are obtained for BV60 and BV170 respectively. △ Less

Submitted 14 May, 2020; originally announced May 2020.

Radiation Campaign of HPK Prototype LGAD sensors for the High-Granularity Timing Detector (HGTD)

Authors: X. Shi, M. K. Ayoub, J. Barreiro Guimarães da Costa, H. Cui, R. Kiuchi, Y. Fan, S. Han, Y. Huang, M. Jing, Z. Liang, B. Liu, J. Liu, F. Lyu, B. Qi, K. Ran, L. Shan, L. Shi, Y. Tan, K. Wu, S. Xiao, T. Yang, Y. Yang, C. Yu, M. Zhao, X. Zhuang , et al. (52 additional authors not shown)

Abstract: We report on the results of a radiation campaign with neutrons and protons of Low Gain Avalanche Detectors (LGAD) produced by Hamamatsu (HPK) as prototypes for the High-Granularity Timing Detector (HGTD) in ATLAS. Sensors with an active thickness of 50~$μ$m were irradiated in steps of roughly 2$\times$ up to a fluence of $3\times10^{15}~\mathrm{n_{eq}cm^{-2}}$. As a function of the fluence, the co… ▽ More We report on the results of a radiation campaign with neutrons and protons of Low Gain Avalanche Detectors (LGAD) produced by Hamamatsu (HPK) as prototypes for the High-Granularity Timing Detector (HGTD) in ATLAS. Sensors with an active thickness of 50~$μ$m were irradiated in steps of roughly 2$\times$ up to a fluence of $3\times10^{15}~\mathrm{n_{eq}cm^{-2}}$. As a function of the fluence, the collected charge and time resolution of the irradiated sensors will be reported for operation at $-30^{\circ}$. △ Less

Submitted 28 April, 2020; originally announced April 2020.