-
TALOS (Total Automation of LabVIEW Operations for Science): A framework for autonomous control systems for complex experiments
Authors:
M. Volponi,
J. Zieliński,
T. Rauschendorfer,
S. Huck,
R. Caravita,
M. Auzins,
B. Bergmann,
P. Burian,
R. S. Brusa,
A. Camper,
F. Castelli,
G. Cerchiari,
R. Ciuryło,
G. Consolati,
M. Doser,
K. Eliaszuk,
A. Giszczak,
L. T. Glöggler,
Ł. Graczykowski,
M. Grosbart,
F. Guatieri,
N. Gusakova,
F. Gustafsson,
S. Haider,
M. A. Janik
, et al. (30 additional authors not shown)
Abstract:
Modern physics experiments are frequently very complex, relying on multiple simultaneous events to happen in order to obtain the desired result. The experiment control system plays a central role in orchestrating the measurement setup: However, its development is often treated as secondary with respect to the hardware, its importance becoming evident only during the operational phase. Therefore, t…
▽ More
Modern physics experiments are frequently very complex, relying on multiple simultaneous events to happen in order to obtain the desired result. The experiment control system plays a central role in orchestrating the measurement setup: However, its development is often treated as secondary with respect to the hardware, its importance becoming evident only during the operational phase. Therefore, the AEgIS (Antimatter Experiment: Gravity, Interferometry, Spectroscopy) collaboration has created a framework for easily coding control systems, specifically targeting atomic, quantum, and antimatter experiments. This framework, called Total Automation of LabVIEW Operations for Science (TALOS), unifies all the machines of the experiment in a single entity, thus enabling complex high-level decisions to be taken, and it is constituted by separate modules, called MicroServices, that run concurrently and asynchronously. This enhances the stability and reproducibility of the system while allowing for continuous integration and testing while the control system is running. The system demonstrated high stability and reproducibility, running completely unsupervised during the night and weekends of the data-taking campaigns. The results demonstrate the suitability of TALOS to manage an entire physics experiment in full autonomy: being open-source, experiments other than the AEgIS experiment can benefit from it.
△ Less
Submitted 2 September, 2024;
originally announced September 2024.
-
Real-time antiproton annihilation vertexing with sub-micron resolution
Authors:
M. Berghold,
D. Orsucci,
F. Guatieri,
S. Alfaro,
M. Auzins,
B. Bergmann,
P. Burian,
R. S. Brusa,
A. Camper,
R. Caravita,
F. Castelli,
G. Cerchiari,
R. Ciuryło,
A. Chehaimi,
G. Consolati,
M. Doser,
K. Eliaszuk,
R. Ferguson,
M. Germann,
A. Giszczak,
L. T. Glöggler,
Ł. Graczykowski,
M. Grosbart,
F. Guatieri,
N. Gusakova
, et al. (42 additional authors not shown)
Abstract:
The primary goal of the AEgIS experiment is to precisely measure the free fall of antihydrogen within Earth's gravitational field. To this end, a cold ~50K antihydrogen beam has to pass through two grids forming a moiré deflectometer before annihilating onto a position-sensitive detector, which shall determine the vertical position of the annihilation vertex relative to the grids with micrometric…
▽ More
The primary goal of the AEgIS experiment is to precisely measure the free fall of antihydrogen within Earth's gravitational field. To this end, a cold ~50K antihydrogen beam has to pass through two grids forming a moiré deflectometer before annihilating onto a position-sensitive detector, which shall determine the vertical position of the annihilation vertex relative to the grids with micrometric accuracy. Here we introduce a vertexing detector based on a modified mobile camera sensor and experimentally demonstrate that it can measure the position of antiproton annihilations with an accuracy of $0.62^{+0.40}_{-0.22}μm$, which represents a 35-fold improvement over the previous state-of-the-art for real-time antiproton vertexing. Importantly, these antiproton detection methods are directly applicable to antihydrogen. Moreover, the sensitivity to light of the sensor enables the in-situ calibration of the moiré deflectometer, significantly reducing systematic errors. This sensor emerges as a breakthrough technology for achieving the \aegis scientific goals and has been selected as the basis for the development of a large-area detector for conducting antihydrogen gravity measurements.
△ Less
Submitted 23 June, 2024;
originally announced June 2024.
-
Spatially-resolved charge detectors for particle beam optimization with femtoampere resolution achieved by in-vacuum signal preamplification
Authors:
Kilian Brenner,
Michael Zimmermann,
Maik Butterling,
Andreas Wagner,
Christoph Hugenschmidt,
Francesco Guatieri
Abstract:
We present the design of a Faraday cup-like charged particle detector in a four quadrant configuration aimed at facilitating the alignment of low-intensity beams of exotic particles. The device is capable of assessing the current on the electrodes with a resolution of 33fA within 15ms or a maximal resolution of 1.8fA with a measurement time of 12.4s. This performance is achieved by minimizing the…
▽ More
We present the design of a Faraday cup-like charged particle detector in a four quadrant configuration aimed at facilitating the alignment of low-intensity beams of exotic particles. The device is capable of assessing the current on the electrodes with a resolution of 33fA within 15ms or a maximal resolution of 1.8fA with a measurement time of 12.4s. This performance is achieved by minimizing the noise through a preamplification circuit installed in vacuum, as close as possible to the electrodes. We tested the detector with the positron beam of ELBE, achieving the nominal maximum resolution with high reproducibility. We then exploited the capabilities of the detector to resolve the two-dimensional shape of the beam, and revealed the presence of a weak electron beam being transported alongside the positrons. Characterization of the detector performance showed that in a variety of scenarios it can be used to quickly center positron beams thus allowing for the prompt optimization of beam transport.
△ Less
Submitted 10 February, 2024;
originally announced February 2024.
-
CIRCUS: an autonomous control system for antimatter, atomic and quantum physics experiments
Authors:
Marco Volponi,
Saiva Huck,
Ruggero Caravita,
Jakub Zielinski,
Georgy Kornakov,
Grzegorz Kasprowicz,
Dorota Nowicka,
Tassilo Rauschendorfer,
Benjamin Rienäcker,
Francesco Prelz,
Marcis Auzins,
Benedikt Bergmann,
Petr Burian,
Roberto Sennen Brusa,
Antoine Camper,
Fabrizio Castelli,
Roman Ciuryło,
Giovanni Consolati,
Michael Doser,
Lisa Glöggler,
Łukasz Graczykowski,
Malgorzata Grosbart,
Francesco Guatieri,
Nataly Gusakova,
Fredrik Gustafsson
, et al. (27 additional authors not shown)
Abstract:
A powerful and robust control system is a crucial, often neglected, pillar of any modern, complex physics experiment that requires the management of a multitude of different devices and their precise time synchronisation. The AEgIS collaboration presents CIRCUS, a novel, autonomous control system optimised for time-critical experiments such as those at CERN's Antiproton Decelerator and, more broad…
▽ More
A powerful and robust control system is a crucial, often neglected, pillar of any modern, complex physics experiment that requires the management of a multitude of different devices and their precise time synchronisation. The AEgIS collaboration presents CIRCUS, a novel, autonomous control system optimised for time-critical experiments such as those at CERN's Antiproton Decelerator and, more broadly, in atomic and quantum physics research. Its setup is based on Sinara/ARTIQ and TALOS, integrating the ALPACA analysis pipeline, the last two developed entirely in AEgIS. It is suitable for strict synchronicity requirements and repeatable, automated operation of experiments, culminating in autonomous parameter optimisation via feedback from real-time data analysis. CIRCUS has been successfully deployed and tested in AEgIS; being experiment-agnostic and released open-source, other experiments can leverage its capabilities.
△ Less
Submitted 7 February, 2024;
originally announced February 2024.
-
Integrated anti-electronics for positron annihilation spectroscopy
Authors:
Francesco Guatieri
Abstract:
Imaging the features of a sample using Positron Annihilation Spectroscopy (PAS) is currently achieved by rastering, i.e. by scanning the sample surface with a sharply focused positron beam. However, a beam of arbitrary shape (sculpted beam) would allow the application of more versatile single-pixel imaging (SPI) techniques. I introduce the design of a microelectronic device employing a 2D array of…
▽ More
Imaging the features of a sample using Positron Annihilation Spectroscopy (PAS) is currently achieved by rastering, i.e. by scanning the sample surface with a sharply focused positron beam. However, a beam of arbitrary shape (sculpted beam) would allow the application of more versatile single-pixel imaging (SPI) techniques. I introduce the design of a microelectronic device employing a 2D array of Zener diodes as an active positron moderator, capable of sculpting positron beams with 6um resolution. The re-emitted positrons are accelerated towards the sample through a miniaturised electrostatic lens system and reaching 100nm resolution. The fast switch-on (90ps) and switch-off (250ps) time of the device would enable state-of-the-art positron annihilation lifetime spectroscopy (PALS) and PAS imaging with high spatial and temporal resolution.
△ Less
Submitted 2 February, 2024;
originally announced February 2024.
-
Positronium laser cooling via the $1^3S$-$2^3P$ transition with a broadband laser pulse
Authors:
L. T. Glöggler,
N. Gusakova,
B. Rienäcker,
A. Camper,
R. Caravita,
S. Huck,
M. Volponi,
T. Wolz,
L. Penasa,
V. Krumins,
F. Gustafsson,
M. Auzins,
B. Bergmann,
P. Burian,
R. S. Brusa,
F. Castelli,
R. Ciuryło,
D. Comparat,
G. Consolati,
M. Doser,
Ł. Graczykowski,
M. Grosbart,
F. Guatieri,
S. Haider,
M. A. Janik
, et al. (27 additional authors not shown)
Abstract:
We report on laser cooling of a large fraction of positronium (Ps) in free-flight by strongly saturating the $1^3S$-$2^3P$ transition with a broadband, long-pulsed 243 nm alexandrite laser. The ground state Ps cloud is produced in a magnetic and electric field-free environment. We observe two different laser-induced effects. The first effect is an increase in the number of atoms in the ground stat…
▽ More
We report on laser cooling of a large fraction of positronium (Ps) in free-flight by strongly saturating the $1^3S$-$2^3P$ transition with a broadband, long-pulsed 243 nm alexandrite laser. The ground state Ps cloud is produced in a magnetic and electric field-free environment. We observe two different laser-induced effects. The first effect is an increase in the number of atoms in the ground state after the time Ps has spent in the long-lived $3^3P$ states. The second effect is the one-dimensional Doppler cooling of Ps, reducing the cloud's temperature from 380(20) K to 170(20) K. We demonstrate a 58(9) % increase in the coldest fraction of the Ps ensemble.
△ Less
Submitted 12 October, 2023;
originally announced October 2023.
-
Imaging low-energy positron beams in real-time with unprecedented resolution
Authors:
Michael Berghold,
Vassily Vadimovitch Burwitz,
Lucian Mathes,
Christoph Pascal Hugenschmidt,
Francesco Guatieri
Abstract:
Particle beams focused to micrometer-sized spots play a crucial role in forefront research using low-energy positrons. Their expedient and wide application, however, requires highly-resolved, fast beam diagnostics. We have developed two different methods to modify a commercial imaging sensor to make it sensitive to low-energy positrons. The first method consists in removing the micro-lens array an…
▽ More
Particle beams focused to micrometer-sized spots play a crucial role in forefront research using low-energy positrons. Their expedient and wide application, however, requires highly-resolved, fast beam diagnostics. We have developed two different methods to modify a commercial imaging sensor to make it sensitive to low-energy positrons. The first method consists in removing the micro-lens array and Bayer filter from the sensor surface and depositing a phosphor layer in their place. This procedure results in a detector capable of imaging positron beams with energies down to a few tens of eV, or an intensity as low as 35 particles/s/mm2 when the beam energy exceeds 10keV. The second approach omits the phosphor deposition; with the resulting device we succeeded in detecting single positrons with energies upwards of 6 keV and efficiency up to 93%. The achieved spatial resolution of 0.97 micrometers is unprecedented for real-time positron detectors.
△ Less
Submitted 6 June, 2023;
originally announced June 2023.
-
A cryogenic tracking detector for antihydrogen detection in the AEgIS experiment
Authors:
C. Amsler,
M. Antonello,
A. Belov,
G. Bonomi,
R. S. Brusa,
M. Caccia,
A. Camper,
R. Caravita,
F. Castelli,
D. Comparat,
G. Consolati,
A. Demetrio,
L. Di Noto,
M. Doser,
P. A. Ekman,
M. Fani,
R. Ferragut,
S. Gerber,
M. Giammarchi,
A. Gligorova,
F. Guatieri,
P. Hackstock,
D. Haider,
S. Haider,
A. Hinterberger
, et al. (33 additional authors not shown)
Abstract:
We present the commissioning of the Fast Annihilation Cryogenic Tracker detector (FACT), installed around the antihydrogen production trap inside the 1 T superconducting magnet of the AEgIS experiment. FACT is designed to detect pions originating from the annihilation of antiprotons. Its 794 scintillating fibers operate at 4 K and are read out by silicon photomultipliers (MPPCs) at near room tempe…
▽ More
We present the commissioning of the Fast Annihilation Cryogenic Tracker detector (FACT), installed around the antihydrogen production trap inside the 1 T superconducting magnet of the AEgIS experiment. FACT is designed to detect pions originating from the annihilation of antiprotons. Its 794 scintillating fibers operate at 4 K and are read out by silicon photomultipliers (MPPCs) at near room temperature. FACT provides the antiproton/antihydrogen annihilation position information with a few ns timing resolution. We present the hardware and software developments which led to the successful operation of the detector for antihydrogen detection and the results of an antiproton-loss based efficiency assessment. The main background to the antihydrogen signal is that of the positrons impinging onto the positronium conversion target and creating a large amount of gamma rays which produce a sizeable signal in the MPPCs shortly before the antihydrogen signal is expected. We detail the characterization of this background signal and its impact on the antihydrogen detection efficiency.
△ Less
Submitted 6 March, 2022;
originally announced March 2022.
-
Rydberg-positronium velocity and self-ionization studies in 1T magnetic field and cryogenic environment
Authors:
M. Antonello,
A. Belov,
G. Bonomi R. S. Brusa,
M. Caccia,
A. Camper,
R. Caravita,
F. Castelli,
D. Comparat,
G. Consolati,
L. Di Noto,
M. Doser,
M. Fani,
R. Ferragut,
J. Fesel,
S. Gerber,
A. Gligorova,
L. T. Glöggler,
F. Guatieri,
S. Haider,
A. Hinterberger,
O. Khalidova,
D. Krasnicky,
V. Lagomarsino,
C. Malbrunot,
S. Mariazzi
, et al. (21 additional authors not shown)
Abstract:
We characterized the pulsed Rydberg-positronium production inside the AEgIS (Antimatter Experiment: Gravity, Interferometry, Spectroscopy) apparatus in view of antihydrogen formation by means of a charge exchange reaction between cold antiprotons and slow Rydberg-positronium atoms. Velocity measurements on positronium along two axes in a cryogenic environment (10K) and in 1T magnetic field were pe…
▽ More
We characterized the pulsed Rydberg-positronium production inside the AEgIS (Antimatter Experiment: Gravity, Interferometry, Spectroscopy) apparatus in view of antihydrogen formation by means of a charge exchange reaction between cold antiprotons and slow Rydberg-positronium atoms. Velocity measurements on positronium along two axes in a cryogenic environment (10K) and in 1T magnetic field were performed. The velocimetry was done by MCP-imaging of photoionized positronium previously excited to the $n=3$ state. One direction of velocity was measured via Doppler-scan of this $n=3$-line, another direction perpendicular to the former by delaying the exciting laser pulses in a time-of-flight measurement. Self-ionization in the magnetic field due to motional Stark effect was also quantified by using the same MCP-imaging technique for Rydberg positronium with an effective principal quantum number $n_{eff}$ ranging between 14 and 22. We conclude with a discussion about the optimization of our experimental parameters for creating Rydberg-positronium in preparation for an efficient pulsed production of antihydrogen.
△ Less
Submitted 22 February, 2022; v1 submitted 11 November, 2019;
originally announced November 2019.
-
Efficient $2^3S$ positronium production by stimulated decay from the $3^3P$ level
Authors:
M. Antonello,
A. Belov,
G. Bonomi,
R. S. Brusa,
M. Caccia,
A. Camper,
R. Caravita,
F. Castelli,
G. Cerchiari,
D. Comparat,
G. Consolati,
A. Demetrio,
L. Di Noto,
M. Doser,
M. Fanì,
S. Gerber,
A. Gligorova,
F. Guatieri,
P. Hackstock,
S. Haider,
A. Hinterberger,
A. Kellerbauer,
O. Khalidova,
D. Krasnicky,
V. Lagomarsino
, et al. (26 additional authors not shown)
Abstract:
We investigate experimentally the possibility of enhancing the production of $2^3S$ positronium atoms by driving the $1^3S$-$3^3P$ and $3^3P$-$2^3S$ transitions, overcoming the natural branching ratio limitation of spontaneous decay from $3^3P$ to $2^3S$. The decay of $3^3P$ positronium atoms towards the $2^3S$ level has been effciently stimulated by a 1312.2nm broadband IR laser pulse. The depend…
▽ More
We investigate experimentally the possibility of enhancing the production of $2^3S$ positronium atoms by driving the $1^3S$-$3^3P$ and $3^3P$-$2^3S$ transitions, overcoming the natural branching ratio limitation of spontaneous decay from $3^3P$ to $2^3S$. The decay of $3^3P$ positronium atoms towards the $2^3S$ level has been effciently stimulated by a 1312.2nm broadband IR laser pulse. The dependence of the stimulating transition efficiency on the intensity of the IR pulse has been measured to find the optimal enhancement conditions. A maximum relative increase of $ \times (3.1 \pm 1.0) $ in the $2^3S$ production efficiency, with respect to the case where only spontaneous decay is present, was obtained.
△ Less
Submitted 18 April, 2019;
originally announced April 2019.
-
Velocity selected production of $2^3S$ metastable positronium
Authors:
C. Amsler,
M. Antonello,
A. Belov,
G. Bonomi,
R. S. Brusa,
M. Caccia,
A. Camper,
R. Caravita,
F. Castelli,
G. Cerchiari,
D. Comparat,
G. Consolati,
A. Demetrio,
L. Di Noto,
M. Doser,
M. Fanì,
S. Gerber,
A. Gligorova,
F. Guatieri,
P. Hackstock,
S. Haider,
A. Hinterberger,
H. Holmestad,
A. Kellerbauer,
O. Khalidova
, et al. (30 additional authors not shown)
Abstract:
Positronium in the $2^3S$ metastable state exhibits a low electrical polarizability and a long lifetime (1140 ns) making it a promising candidate for interferometry experiments with a neutral matter-antimatter system. In the present work, $2^3S$ positronium is produced - in absence of electric field - via spontaneous radiative decay from the $3^3P$ level populated with a 205nm UV laser pulse. Than…
▽ More
Positronium in the $2^3S$ metastable state exhibits a low electrical polarizability and a long lifetime (1140 ns) making it a promising candidate for interferometry experiments with a neutral matter-antimatter system. In the present work, $2^3S$ positronium is produced - in absence of electric field - via spontaneous radiative decay from the $3^3P$ level populated with a 205nm UV laser pulse. Thanks to the short temporal length of the pulse, 1.5 ns full-width at half maximum, different velocity populations of a positronium cloud emitted from a nanochannelled positron/positronium converter were selected by delaying the excitation pulse with respect to the production instant. $ 2^3S $ positronium atoms with velocity tuned between $ 7 \cdot 10^4 $ m/s and $ 10 \cdot 10^4 $ m/s were thus produced. Depending on the selected velocity, a $2^3S$ production effciency ranging from $\sim 0.8 \%$ to $\sim 1.7%$, with respect to the total amount of emitted positronium, was obtained. The observed results give a branching ratio for the $3^3P$-$2^3S$ spontaneous decay of $(9.7 \pm 2.7) \% $. The present velocity selection technique could allow to produce an almost monochromatic beam of $\sim 1 \cdot 10^3 $ $2^3S$ atoms with a velocity spread $ < 10^4 $ m/s and an angular divergence of $\sim$ 50 mrad.
△ Less
Submitted 18 April, 2019; v1 submitted 6 August, 2018;
originally announced August 2018.
-
Producing long-lived $2^3\text{S}$ Ps via $3^3\text{P}$ laser excitation in magnetic and electric fields
Authors:
S. Aghion,
C. Amsler,
M. Antonello,
A. Belov,
G. Bonomi,
R. S. Brusa,
M. Caccia,
A. Camper,
R. Caravita,
F. Castelli,
G. Cerchiari,
D. Comparat,
G. Consolati,
A. Demetrio,
L. Di Noto,
M. Doser,
C. Evans,
M. Fani,
R. Ferragut,
J. Fesel,
A. Fontana,
S. Gerber,
M. Giammarchi,
A. Gligorova,
F. Guatieri
, et al. (40 additional authors not shown)
Abstract:
Producing positronium (Ps) in the metastable $2^3\text{S}$ state is of interest for various applications in fundamental physics. We report here about an experiment in which Ps atoms are produced in this long-lived state by spontaneous radiative decay of Ps excited to the $3^3\text{P}$ level manifold. The Ps cloud excitation is obtained with a UV laser pulse in an experimental vacuum chamber in pre…
▽ More
Producing positronium (Ps) in the metastable $2^3\text{S}$ state is of interest for various applications in fundamental physics. We report here about an experiment in which Ps atoms are produced in this long-lived state by spontaneous radiative decay of Ps excited to the $3^3\text{P}$ level manifold. The Ps cloud excitation is obtained with a UV laser pulse in an experimental vacuum chamber in presence of guiding magnetic field of 25 mT and an average electric field of 300 V/cm. The indication of the $2^3\text{S}$ state production is obtained from a novel analysis technique of single-shot positronium annihilation lifetime spectra. Its production efficiency relative to the total amount of formed Ps is evaluated by fitting a simple rate equations model to the experimental data and found to be $ (2.1 \pm 1.3) \, \% $.
△ Less
Submitted 20 February, 2018;
originally announced February 2018.
-
Measurement of antiproton annihilation on Cu, Ag and Au with emulsion films
Authors:
S. Aghion,
C. Amsler,
A. Ariga,
T. Ariga,
G. Bonomi,
P. Braunig,
R. S. Brusa,
L. Cabaret,
M. Caccia,
R. Caravita,
F. Castelli,
G. Cerchiari,
D. Comparat,
G. Consolati,
A. Demetrio,
L. Di Noto,
M. Doser,
A. Ereditato,
C. Evans,
R. Ferragut,
J. Fesel,
A. Fontana,
S. Gerber,
M. Giammarchi,
A. Gligorova
, et al. (47 additional authors not shown)
Abstract:
The characteristics of low energy antiproton annihilations on nuclei (e.g. hadronization and product multiplicities) are not well known, and Monte Carlo simulation packages that use different models provide different descriptions of the annihilation events. In this study, we measured the particle multiplicities resulting from antiproton annihilations on nuclei. The results were compared with predi…
▽ More
The characteristics of low energy antiproton annihilations on nuclei (e.g. hadronization and product multiplicities) are not well known, and Monte Carlo simulation packages that use different models provide different descriptions of the annihilation events. In this study, we measured the particle multiplicities resulting from antiproton annihilations on nuclei. The results were compared with predictions obtained using different models in the simulation tools GEANT4 and FLUKA. For this study, we exposed thin targets (Cu, Ag and Au) to a very low energy antiproton beam from CERN's Antiproton Decelerator, exploiting the secondary beamline available in the AEgIS experimental zone. The antiproton annihilation products were detected using emulsion films developed at the Laboratory of High Energy Physics in Bern, where they were analysed at the automatic microscope facility. The fragment multiplicity measured in this study is in good agreement with results obtained with FLUKA simulations for both minimally and heavily ionizing particles.
△ Less
Submitted 23 April, 2017; v1 submitted 23 January, 2017;
originally announced January 2017.
-
DAFNE Consolidation Program and Operation with the KLOE-2 Detector
Authors:
Catia Milardi,
David Alesini,
Maria Enrica Biagini,
Simone Bini,
Manuela Boscolo,
Bruno Buonomo,
Sergio Cantarella,
Antonio De Santis,
Giampiero Di Pirro,
Giovanni Delle Monache,
Alessandro Drago,
Luca Foggetta,
Oscar Frasciello,
Alessandro Gallo,
Riccardo Gargana,
Andrea Ghigo,
Francesco Guatieri,
Susanna Guiducci,
Franco Iungo,
Carlo Ligi,
Andrea Michelotti,
Luigi Pellegrino,
Ruggero Ricci,
Ugo Rotundo,
Giancarlo Sensolini
, et al. (5 additional authors not shown)
Abstract:
After a long preparatory phase, including a wide hardware consolidation program, the Italian lepton collider DAFNE, is now systematically delivering data to the KLOE-2 experiment. In approximately 200 days of operation 1 fb-1 has been given to the detector limiting the background to a level compatible with an efficient data acquisition. Instantaneous and maximum daily integrated luminosity measure…
▽ More
After a long preparatory phase, including a wide hardware consolidation program, the Italian lepton collider DAFNE, is now systematically delivering data to the KLOE-2 experiment. In approximately 200 days of operation 1 fb-1 has been given to the detector limiting the background to a level compatible with an efficient data acquisition. Instantaneous and maximum daily integrated luminosity measured, so far, are considerably higher with respect to the previous KLOE runs, and are: L(inst) ~ 2.0 1032 cm-2s-1, and L(day) ~ 12.5 pb-1 respectively. A general review concerning refurbishing activities, machine optimization efforts and data taking performances is presented and discussed.
△ Less
Submitted 28 September, 2015;
originally announced September 2015.
