-
A cryogenic tracking detector for antihydrogen detection in the AEgIS experiment
Authors:
C. Amsler,
M. Antonello,
A. Belov,
G. Bonomi,
R. S. Brusa,
M. Caccia,
A. Camper,
R. Caravita,
F. Castelli,
D. Comparat,
G. Consolati,
A. Demetrio,
L. Di Noto,
M. Doser,
P. A. Ekman,
M. Fani,
R. Ferragut,
S. Gerber,
M. Giammarchi,
A. Gligorova,
F. Guatieri,
P. Hackstock,
D. Haider,
S. Haider,
A. Hinterberger
, et al. (33 additional authors not shown)
Abstract:
We present the commissioning of the Fast Annihilation Cryogenic Tracker detector (FACT), installed around the antihydrogen production trap inside the 1 T superconducting magnet of the AEgIS experiment. FACT is designed to detect pions originating from the annihilation of antiprotons. Its 794 scintillating fibers operate at 4 K and are read out by silicon photomultipliers (MPPCs) at near room tempe…
▽ More
We present the commissioning of the Fast Annihilation Cryogenic Tracker detector (FACT), installed around the antihydrogen production trap inside the 1 T superconducting magnet of the AEgIS experiment. FACT is designed to detect pions originating from the annihilation of antiprotons. Its 794 scintillating fibers operate at 4 K and are read out by silicon photomultipliers (MPPCs) at near room temperature. FACT provides the antiproton/antihydrogen annihilation position information with a few ns timing resolution. We present the hardware and software developments which led to the successful operation of the detector for antihydrogen detection and the results of an antiproton-loss based efficiency assessment. The main background to the antihydrogen signal is that of the positrons impinging onto the positronium conversion target and creating a large amount of gamma rays which produce a sizeable signal in the MPPCs shortly before the antihydrogen signal is expected. We detail the characterization of this background signal and its impact on the antihydrogen detection efficiency.
△ Less
Submitted 6 March, 2022;
originally announced March 2022.
-
BLEMAB European project: muon imaging technique applied to blast furnaces
Authors:
BLEMAB Collaboration,
L. Bonechi,
F. Ambrosino,
P. Andreetto,
G. Bonomi,
D. Borselli,
S. Bottai,
T. Buhles,
I. Calliari,
P. Checchia,
U. Chiarotti,
C. Cialdai,
R. Ciaranfi,
L. Cimmino,
V. Ciulli,
R. D'Alessandro,
M. D'Errico,
R. Ferretti,
F. Finke,
A. Franzen,
B. Glaser,
S. Gonzi,
Y. Liu,
A. Lorenzon,
V. Masone
, et al. (8 additional authors not shown)
Abstract:
The BLEMAB European project (BLast furnace stack density Estimation through online Muon ABsorption measurements), evolution of the previous MuBlast European project, is designed to investigate in detail the capability of muon radiography techniques applied to the imaging of a blast furnace's inner zone. In particular, the geometry and size of the so called cohesive zone, i.e. the spatial zone wher…
▽ More
The BLEMAB European project (BLast furnace stack density Estimation through online Muon ABsorption measurements), evolution of the previous MuBlast European project, is designed to investigate in detail the capability of muon radiography techniques applied to the imaging of a blast furnace's inner zone. In particular, the geometry and size of the so called cohesive zone, i.e. the spatial zone where the slowly downward moving material begins to soften and melt, that plays an important role in the performance of the blast furnace itself. Thanks to the high penetration power of the natural cosmic ray muon radiation, muon transmission radiography represents an appropriate non-invasive methodology for imaging large high-density structures such as blast furnaces, whose linear size can be up to a few tens of meters. A state-of-the-art muon tracking system, whose design profits from the long experience of our collaboration in this field, is currently under development and will be installed in 2022 at a blast furnace on the ArcelorMittal site in Bremen (Germany) for many months. Collected data will be exploited to monitor temporal variations of the average density distribution inside the furnace. Muon radiography results will also be compared with measurements obtained through an enhanced multipoint probe and standard blast furnace models.
△ Less
Submitted 19 January, 2022; v1 submitted 19 October, 2021;
originally announced October 2021.
-
First demonstration of in-beam performance of bent Monolithic Active Pixel Sensors
Authors:
ALICE ITS project,
:,
G. Aglieri Rinella,
M. Agnello,
B. Alessandro,
F. Agnese,
R. S. Akram,
J. Alme,
E. Anderssen,
D. Andreou,
F. Antinori,
N. Apadula,
P. Atkinson,
R. Baccomi,
A. Badalà,
A. Balbino,
C. Bartels,
R. Barthel,
F. Baruffaldi,
I. Belikov,
S. Beole,
P. Becht,
A. Bhatti,
M. Bhopal,
N. Bianchi
, et al. (230 additional authors not shown)
Abstract:
A novel approach for designing the next generation of vertex detectors foresees to employ wafer-scale sensors that can be bent to truly cylindrical geometries after thinning them to thicknesses of 20-40$μ$m. To solidify this concept, the feasibility of operating bent MAPS was demonstrated using 1.5$\times$3cm ALPIDE chips. Already with their thickness of 50$μ$m, they can be successfully bent to ra…
▽ More
A novel approach for designing the next generation of vertex detectors foresees to employ wafer-scale sensors that can be bent to truly cylindrical geometries after thinning them to thicknesses of 20-40$μ$m. To solidify this concept, the feasibility of operating bent MAPS was demonstrated using 1.5$\times$3cm ALPIDE chips. Already with their thickness of 50$μ$m, they can be successfully bent to radii of about 2cm without any signs of mechanical or electrical damage. During a subsequent characterisation using a 5.4GeV electron beam, it was further confirmed that they preserve their full electrical functionality as well as particle detection performance.
In this article, the bending procedure and the setup used for characterisation are detailed. Furthermore, the analysis of the beam test, including the measurement of the detection efficiency as a function of beam position and local inclination angle, is discussed. The results show that the sensors maintain their excellent performance after bending to radii of 2cm, with detection efficiencies above 99.9% at typical operating conditions, paving the way towards a new class of detectors with unprecedented low material budget and ideal geometrical properties.
△ Less
Submitted 17 August, 2021; v1 submitted 27 May, 2021;
originally announced May 2021.
-
Efficient $2^3S$ positronium production by stimulated decay from the $3^3P$ level
Authors:
M. Antonello,
A. Belov,
G. Bonomi,
R. S. Brusa,
M. Caccia,
A. Camper,
R. Caravita,
F. Castelli,
G. Cerchiari,
D. Comparat,
G. Consolati,
A. Demetrio,
L. Di Noto,
M. Doser,
M. Fanì,
S. Gerber,
A. Gligorova,
F. Guatieri,
P. Hackstock,
S. Haider,
A. Hinterberger,
A. Kellerbauer,
O. Khalidova,
D. Krasnicky,
V. Lagomarsino
, et al. (26 additional authors not shown)
Abstract:
We investigate experimentally the possibility of enhancing the production of $2^3S$ positronium atoms by driving the $1^3S$-$3^3P$ and $3^3P$-$2^3S$ transitions, overcoming the natural branching ratio limitation of spontaneous decay from $3^3P$ to $2^3S$. The decay of $3^3P$ positronium atoms towards the $2^3S$ level has been effciently stimulated by a 1312.2nm broadband IR laser pulse. The depend…
▽ More
We investigate experimentally the possibility of enhancing the production of $2^3S$ positronium atoms by driving the $1^3S$-$3^3P$ and $3^3P$-$2^3S$ transitions, overcoming the natural branching ratio limitation of spontaneous decay from $3^3P$ to $2^3S$. The decay of $3^3P$ positronium atoms towards the $2^3S$ level has been effciently stimulated by a 1312.2nm broadband IR laser pulse. The dependence of the stimulating transition efficiency on the intensity of the IR pulse has been measured to find the optimal enhancement conditions. A maximum relative increase of $ \times (3.1 \pm 1.0) $ in the $2^3S$ production efficiency, with respect to the case where only spontaneous decay is present, was obtained.
△ Less
Submitted 18 April, 2019;
originally announced April 2019.
-
Velocity selected production of $2^3S$ metastable positronium
Authors:
C. Amsler,
M. Antonello,
A. Belov,
G. Bonomi,
R. S. Brusa,
M. Caccia,
A. Camper,
R. Caravita,
F. Castelli,
G. Cerchiari,
D. Comparat,
G. Consolati,
A. Demetrio,
L. Di Noto,
M. Doser,
M. Fanì,
S. Gerber,
A. Gligorova,
F. Guatieri,
P. Hackstock,
S. Haider,
A. Hinterberger,
H. Holmestad,
A. Kellerbauer,
O. Khalidova
, et al. (30 additional authors not shown)
Abstract:
Positronium in the $2^3S$ metastable state exhibits a low electrical polarizability and a long lifetime (1140 ns) making it a promising candidate for interferometry experiments with a neutral matter-antimatter system. In the present work, $2^3S$ positronium is produced - in absence of electric field - via spontaneous radiative decay from the $3^3P$ level populated with a 205nm UV laser pulse. Than…
▽ More
Positronium in the $2^3S$ metastable state exhibits a low electrical polarizability and a long lifetime (1140 ns) making it a promising candidate for interferometry experiments with a neutral matter-antimatter system. In the present work, $2^3S$ positronium is produced - in absence of electric field - via spontaneous radiative decay from the $3^3P$ level populated with a 205nm UV laser pulse. Thanks to the short temporal length of the pulse, 1.5 ns full-width at half maximum, different velocity populations of a positronium cloud emitted from a nanochannelled positron/positronium converter were selected by delaying the excitation pulse with respect to the production instant. $ 2^3S $ positronium atoms with velocity tuned between $ 7 \cdot 10^4 $ m/s and $ 10 \cdot 10^4 $ m/s were thus produced. Depending on the selected velocity, a $2^3S$ production effciency ranging from $\sim 0.8 \%$ to $\sim 1.7%$, with respect to the total amount of emitted positronium, was obtained. The observed results give a branching ratio for the $3^3P$-$2^3S$ spontaneous decay of $(9.7 \pm 2.7) \% $. The present velocity selection technique could allow to produce an almost monochromatic beam of $\sim 1 \cdot 10^3 $ $2^3S$ atoms with a velocity spread $ < 10^4 $ m/s and an angular divergence of $\sim$ 50 mrad.
△ Less
Submitted 18 April, 2019; v1 submitted 6 August, 2018;
originally announced August 2018.
-
Producing long-lived $2^3\text{S}$ Ps via $3^3\text{P}$ laser excitation in magnetic and electric fields
Authors:
S. Aghion,
C. Amsler,
M. Antonello,
A. Belov,
G. Bonomi,
R. S. Brusa,
M. Caccia,
A. Camper,
R. Caravita,
F. Castelli,
G. Cerchiari,
D. Comparat,
G. Consolati,
A. Demetrio,
L. Di Noto,
M. Doser,
C. Evans,
M. Fani,
R. Ferragut,
J. Fesel,
A. Fontana,
S. Gerber,
M. Giammarchi,
A. Gligorova,
F. Guatieri
, et al. (40 additional authors not shown)
Abstract:
Producing positronium (Ps) in the metastable $2^3\text{S}$ state is of interest for various applications in fundamental physics. We report here about an experiment in which Ps atoms are produced in this long-lived state by spontaneous radiative decay of Ps excited to the $3^3\text{P}$ level manifold. The Ps cloud excitation is obtained with a UV laser pulse in an experimental vacuum chamber in pre…
▽ More
Producing positronium (Ps) in the metastable $2^3\text{S}$ state is of interest for various applications in fundamental physics. We report here about an experiment in which Ps atoms are produced in this long-lived state by spontaneous radiative decay of Ps excited to the $3^3\text{P}$ level manifold. The Ps cloud excitation is obtained with a UV laser pulse in an experimental vacuum chamber in presence of guiding magnetic field of 25 mT and an average electric field of 300 V/cm. The indication of the $2^3\text{S}$ state production is obtained from a novel analysis technique of single-shot positronium annihilation lifetime spectra. Its production efficiency relative to the total amount of formed Ps is evaluated by fitting a simple rate equations model to the experimental data and found to be $ (2.1 \pm 1.3) \, \% $.
△ Less
Submitted 20 February, 2018;
originally announced February 2018.
-
Measurement of antiproton annihilation on Cu, Ag and Au with emulsion films
Authors:
S. Aghion,
C. Amsler,
A. Ariga,
T. Ariga,
G. Bonomi,
P. Braunig,
R. S. Brusa,
L. Cabaret,
M. Caccia,
R. Caravita,
F. Castelli,
G. Cerchiari,
D. Comparat,
G. Consolati,
A. Demetrio,
L. Di Noto,
M. Doser,
A. Ereditato,
C. Evans,
R. Ferragut,
J. Fesel,
A. Fontana,
S. Gerber,
M. Giammarchi,
A. Gligorova
, et al. (47 additional authors not shown)
Abstract:
The characteristics of low energy antiproton annihilations on nuclei (e.g. hadronization and product multiplicities) are not well known, and Monte Carlo simulation packages that use different models provide different descriptions of the annihilation events. In this study, we measured the particle multiplicities resulting from antiproton annihilations on nuclei. The results were compared with predi…
▽ More
The characteristics of low energy antiproton annihilations on nuclei (e.g. hadronization and product multiplicities) are not well known, and Monte Carlo simulation packages that use different models provide different descriptions of the annihilation events. In this study, we measured the particle multiplicities resulting from antiproton annihilations on nuclei. The results were compared with predictions obtained using different models in the simulation tools GEANT4 and FLUKA. For this study, we exposed thin targets (Cu, Ag and Au) to a very low energy antiproton beam from CERN's Antiproton Decelerator, exploiting the secondary beamline available in the AEgIS experimental zone. The antiproton annihilation products were detected using emulsion films developed at the Laboratory of High Energy Physics in Bern, where they were analysed at the automatic microscope facility. The fragment multiplicity measured in this study is in good agreement with results obtained with FLUKA simulations for both minimally and heavily ionizing particles.
△ Less
Submitted 23 April, 2017; v1 submitted 23 January, 2017;
originally announced January 2017.
-
Precision measurements of Linear Scattering Density using Muon Tomography
Authors:
E. Åström,
G. Bonomi,
I. Calliari,
P. Calvini,
P. Checchia,
A. Donzella,
E. Faraci,
F. Forsberg,
F. Gonella,
X. Hu,
J. Klinger,
L. Sundqvist Ödqvist,
D. Pagano,
A. Rigoni,
E. Ramous,
M. Urbani,
S. Vanini,
A. Zenoni,
G. Zumerle
Abstract:
We demonstrate that muon tomography can be used to precisely measure the properties of various materials. The materials which have been considered have been extracted from an experimental blast furnace, including carbon (coke) and iron oxides, for which measurements of the linear scattering density relative to the mass density have been performed with an absolute precision of 10%. We report the pr…
▽ More
We demonstrate that muon tomography can be used to precisely measure the properties of various materials. The materials which have been considered have been extracted from an experimental blast furnace, including carbon (coke) and iron oxides, for which measurements of the linear scattering density relative to the mass density have been performed with an absolute precision of 10%. We report the procedures that are used in order to obtain such precision, and a discussion is presented to address the expected performance of the technique when applied to heavier materials. The results we obtain do not depend on the specific type of material considered and therefore they can be extended to any application.
△ Less
Submitted 22 July, 2016; v1 submitted 24 May, 2016;
originally announced May 2016.
-
Historical building stability monitoring by means of a cosmic ray tracking system
Authors:
A. Zenoni,
G. Bonomi,
A. Donzella,
M. Subieta,
G. Baronio,
I. Bodini,
D. Cambiaghi,
M. Lancini,
D. Vetturi,
O. Barnabà,
F. Fallavollita,
R. Nardò,
C. Riccardi,
M. Rossella,
P. Vitulo,
G. Zumerle
Abstract:
Cosmic ray radiation is mostly composed, at sea level, by high energy muons, which are highly penetrating particles capable of crossing kilometers of rock. Cosmic ray radiation constituted the first source of projectiles used to investigate the intimate structure of matter and is currently and largely used for particle detector test and calibration. The ubiquitous and steady presence at the Earth'…
▽ More
Cosmic ray radiation is mostly composed, at sea level, by high energy muons, which are highly penetrating particles capable of crossing kilometers of rock. Cosmic ray radiation constituted the first source of projectiles used to investigate the intimate structure of matter and is currently and largely used for particle detector test and calibration. The ubiquitous and steady presence at the Earth's surface and the high penetration capability has motivated the use of cosmic ray radiation also in fields beyond particle physics, from geological and archaeological studies to industrial applications and civil security. In the present paper, cosmic ray muon detection techniques are assessed for stability monitoring applications in the field of civil engineering, in particular for static monitoring of historical buildings, where conservation constraints are more severe and the time evolution of the deformation phenomena under study may be of the order of months or years. As a significant case study, the monitoring of the wooden vaulted roof of the "Palazzo della Loggia" in the town of Brescia, in Italy, has been considered. The feasibility as well as the performances and limitations of a monitoring system based on cosmic ray tracking, in the considered case, have been studied by Monte Carlo simulation and discussed in comparison with more traditional monitoring systems. Requirements for muon detectors suitable for this particular application, as well as the results of some preliminary tests on a muon detector prototype based on scintillating fibers and silicon photomultipliers SiPM are presented.
△ Less
Submitted 7 March, 2014;
originally announced March 2014.
-
Annihilation of low energy antiprotons in silicon
Authors:
S. Aghion,
O. Ahlén,
A. S. Belov,
G. Bonomi,
P. Bräunig,
J. Bremer,
R. S. Brusa,
G. Burghart,
L. Cabaret,
M. Caccia,
C. Canali,
R. Caravita,
F. Castelli,
G. Cerchiari,
S. Cialdi,
D. Comparat,
G. Consolati,
J. H. Derking,
S. Di Domizio,
L. Di Noto,
M. Doser,
A. Dudarev,
R. Ferragut,
A. Fontana,
P. Genova
, et al. (34 additional authors not shown)
Abstract:
The goal of the AE$\mathrm{\bar{g}}$IS experiment at the Antiproton Decelerator (AD) at CERN, is to measure directly the Earth's gravitational acceleration on antimatter. To achieve this goal, the AE$\mathrm{\bar{g}}$IS collaboration will produce a pulsed, cold (100 mK) antihydrogen beam with a velocity of a few 100 m/s and measure the magnitude of the vertical deflection of the beam from a straig…
▽ More
The goal of the AE$\mathrm{\bar{g}}$IS experiment at the Antiproton Decelerator (AD) at CERN, is to measure directly the Earth's gravitational acceleration on antimatter. To achieve this goal, the AE$\mathrm{\bar{g}}$IS collaboration will produce a pulsed, cold (100 mK) antihydrogen beam with a velocity of a few 100 m/s and measure the magnitude of the vertical deflection of the beam from a straight path. The final position of the falling antihydrogen will be detected by a position sensitive detector. This detector will consist of an active silicon part, where the annihilations take place, followed by an emulsion part. Together, they allow to achieve 1$%$ precision on the measurement of $\bar{g}$ with about 600 reconstructed and time tagged annihilations.
We present here, to the best of our knowledge, the first direct measurement of antiproton annihilation in a segmented silicon sensor, the first step towards designing a position sensitive silicon detector for the AE$\mathrm{\bar{g}}$IS experiment. We also present a first comparison with Monte Carlo simulations (GEANT4) for antiproton energies below 5 MeV
△ Less
Submitted 11 March, 2014; v1 submitted 20 November, 2013;
originally announced November 2013.
-
Noise reduction in muon tomography for detecting high density objects
Authors:
M. Benettoni,
G. Bettella,
G. Bonomi,
G. Calvagno,
P. Calvini,
P. Checchia,
G. Cortelazzo,
L. Cossutta,
A. Donzella,
M. Furlan,
F. Gonella,
M. Pegoraro,
A. Rigoni Garola,
P. Ronchese,
S. Squarcia,
M. Subieta,
S. Vanini,
G. Viesti,
P. Zanuttigh,
A. Zenoni,
G. Zumerle
Abstract:
The muon tomography technique, based on multiple Coulomb scattering of cosmic ray muons, has been proposed as a tool to detect the presence of high density objects inside closed volumes. In this paper a new and innovative method is presented to handle the density fluctuations (noise) of reconstructed images, a well known problem of this technique. The effectiveness of our method is evaluated using…
▽ More
The muon tomography technique, based on multiple Coulomb scattering of cosmic ray muons, has been proposed as a tool to detect the presence of high density objects inside closed volumes. In this paper a new and innovative method is presented to handle the density fluctuations (noise) of reconstructed images, a well known problem of this technique. The effectiveness of our method is evaluated using experimental data obtained with a muon tomography prototype located at the Legnaro National Laboratories (LNL) of the Istituto Nazionale di Fisica Nucleare (INFN). The results reported in this paper, obtained with real cosmic ray data, show that with appropriate image filtering and muon momentum classification, the muon tomography technique can detect high density materials, such as lead, albeit surrounded by light or medium density material, in short times. A comparison with algorithms published in literature is also presented.
△ Less
Submitted 9 December, 2013; v1 submitted 23 July, 2013;
originally announced July 2013.
-
Prospects for measuring the gravitational free-fall of antihydrogen with emulsion detectors
Authors:
AEgIS Collaboration,
S. Aghion,
O. Ahlén,
C. Amsler,
A. Ariga,
T. Ariga,
A. S. Belov,
G. Bonomi,
P. Bräunig,
J. Bremer,
R. S. Brusa,
L. Cabaret,
C. Canali,
R. Caravita,
F. Castelli,
G. Cerchiari,
S. Cialdi,
D. Comparat,
G. Consolati,
J. H. Derking,
S. Di Domizio,
L. Di Noto,
M. Doser,
A. Dudarev,
A. Ereditato
, et al. (46 additional authors not shown)
Abstract:
The main goal of the AEgIS experiment at CERN is to test the weak equivalence principle for antimatter. AEgIS will measure the free-fall of an antihydrogen beam traversing a moiré deflectometer. The goal is to determine the gravitational acceleration g for antihydrogen with an initial relative accuracy of 1% by using an emulsion detector combined with a silicon micro-strip detector to measure the…
▽ More
The main goal of the AEgIS experiment at CERN is to test the weak equivalence principle for antimatter. AEgIS will measure the free-fall of an antihydrogen beam traversing a moiré deflectometer. The goal is to determine the gravitational acceleration g for antihydrogen with an initial relative accuracy of 1% by using an emulsion detector combined with a silicon micro-strip detector to measure the time of flight. Nuclear emulsions can measure the annihilation vertex of antihydrogen atoms with a precision of about 1 - 2 microns r.m.s. We present here results for emulsion detectors operated in vacuum using low energy antiprotons from the CERN antiproton decelerator. We compare with Monte Carlo simulations, and discuss the impact on the AEgIS project.
△ Less
Submitted 24 June, 2013;
originally announced June 2013.
-
Formation Of A Cold Antihydrogen Beam in AEGIS For Gravity Measurements
Authors:
G. Testera,
A. S. Belov,
G. Bonomi,
I. Boscolo,
N. Brambilla,
R. S. Brusa,
V. M. Byakov,
L. Cabaret,
C. Canali,
C. Carraro,
F. Castelli,
S. Cialdi,
M. de Combarieu,
D. Comparat,
G. Consolati,
N. Djourelov,
M. Doser,
G. Drobychev,
A. Dupasquier,
D. Fabris,
R. Ferragut,
G. Ferrari,
A. Fischer,
A. Fontana,
P. Forget
, et al. (40 additional authors not shown)
Abstract:
The formation of the antihydrogen beam in the AEGIS experiment through the use of inhomogeneous electric fields is discussed and simulation results including the geometry of the apparatus and realistic hypothesis about the antihydrogen initial conditions are shown. The resulting velocity distribution matches the requirements of the gravity experiment. In particular it is shown that the inhomogen…
▽ More
The formation of the antihydrogen beam in the AEGIS experiment through the use of inhomogeneous electric fields is discussed and simulation results including the geometry of the apparatus and realistic hypothesis about the antihydrogen initial conditions are shown. The resulting velocity distribution matches the requirements of the gravity experiment. In particular it is shown that the inhomogeneous electric fields provide radial cooling of the beam during the acceleration.
△ Less
Submitted 30 May, 2008;
originally announced May 2008.
-
Three Dimensional Annihilation Imaging of Antiprotons in a Penning Trap
Authors:
M. C. Fujiwara,
M. Amoretti,
G. Bonomi,
A. Bouchta,
P. D. Bowe,
C. Carraro,
C. L. Cesar,
M. Charlton,
M. Doser,
V. Filippini,
A. Fontana,
R. Funakoshi,
P. Genova,
J. S. Hangst,
R. S. Hayano,
L. V. Jorgensen,
V. Lagomarsino,
R. Landuad,
D. Lindelof,
E. Lodi Rizzini,
M. Macri,
N. Madsen,
M. Marchesotti,
P. Montagna,
H. Pruys
, et al. (6 additional authors not shown)
Abstract:
We demonstrate three-dimensional annihilation imaging of antiprotons trapped in a Penning trap. Exploiting unusual feature of antiparticles, we investigate a previously unexplored regime in particle transport; the proximity of the trap wall. Particle loss on the wall, the final step of radial transport, is observed to be highly non-uniform, both radially and azimuthally. These observations have…
▽ More
We demonstrate three-dimensional annihilation imaging of antiprotons trapped in a Penning trap. Exploiting unusual feature of antiparticles, we investigate a previously unexplored regime in particle transport; the proximity of the trap wall. Particle loss on the wall, the final step of radial transport, is observed to be highly non-uniform, both radially and azimuthally. These observations have considerable implications for the production and detection of antihydrogen atoms.
△ Less
Submitted 29 January, 2004;
originally announced January 2004.
-
Positron plasma diagnostics and temperature control for antihydrogen production
Authors:
ATHENA Collaboration,
M. Amoretti,
C. Amsler,
G. Bonomi,
A. Bouchta,
P. D. Bowe,
C. Carraro,
C. L. Cesar,
M. Charlton,
M. Doser,
V. Filippini,
A. Fontana,
M. C. Fujiwara,
R. Funakoshi,
P. Genova,
J. S. Hangst,
R. S. Hayano,
L. V. Jorgensen,
V. Lagomarsino,
R. Landua,
D. Lindelof,
E. Lodi Rizzini,
M. Macri',
N. Madsen,
G. Manuzio
, et al. (7 additional authors not shown)
Abstract:
Production of antihydrogen atoms by mixing antiprotons with a cold, confined, positron plasma depends critically on parameters such as the plasma density and temperature. We discuss non-destructive measurements, based on a novel, real-time analysis of excited, low-order plasma modes, that provide comprehensive characterization of the positron plasma in the ATHENA antihydrogen apparatus. The plas…
▽ More
Production of antihydrogen atoms by mixing antiprotons with a cold, confined, positron plasma depends critically on parameters such as the plasma density and temperature. We discuss non-destructive measurements, based on a novel, real-time analysis of excited, low-order plasma modes, that provide comprehensive characterization of the positron plasma in the ATHENA antihydrogen apparatus. The plasma length, radius, density, and total particle number are obtained. Measurement and control of plasma temperature variations, and the application to antihydrogen production experiments are discussed.
△ Less
Submitted 30 July, 2003;
originally announced July 2003.