-
The parametric spring-mass system, its connection with non-linear optics, and an approach for undergraduate students
Authors:
Ilario Boscolo,
Fabrizio Castelli,
Marco Stellato,
Stefano Vercellati
Abstract:
The spring-mass system studied in undergraduate physics laboratories may exhibit complex dynamics due to the simultaneous action of gravitational and elastic forces in addition to air friction. In the first part of this paper, we describe a laboratory experiment aimed at beginner students which also gives those with a more advanced background an opportunity to explore more complex aspects of the m…
▽ More
The spring-mass system studied in undergraduate physics laboratories may exhibit complex dynamics due to the simultaneous action of gravitational and elastic forces in addition to air friction. In the first part of this paper, we describe a laboratory experiment aimed at beginner students which also gives those with a more advanced background an opportunity to explore more complex aspects of the motions involved. If students are not given predefined apparatus but are allowed instead to design their own set-up for the experiment, they may also learn something about the thought processes and experimental procedures used in physics. In the second part of this paper, we present a systematic study of the parametric behavior of the system because teachers have to master its dynamics. The non-linear interaction between the vertical and the pendular oscillations in a vertical spring-mass system depends on the ratio between the frequencies of the two motions and on the motion's excitation. Systematic experimental investigations, coupled with relevant simulations, highlight the many aspects of physics involved in the partition of energy transfer between the two modes. The different motion waveforms obtained by sweeping through the resonance curve and by applying small and strong excitations are presented and analyzed. The influence of the unavoidable spurious motions is investigated. An analogy between the parametric interaction in a spring--mass system and that found during frequency conversion in non-linear optical crystals is discussed.
△ Less
Submitted 21 February, 2014;
originally announced February 2014.
-
An undergraduate study of harmonic and parametric motion of a simple spring-mass system from motion waveforms
Authors:
Ilario Boscolo,
Fabrizio Castelli,
Marco Stellato
Abstract:
The spring-mass system studied in undergraduate physics laboratories may show complex dynamics due to the simultaneous action of gravitational, elastic, and torsional forces, in addition to air friction. In this paper, we describe a laboratory exercise that caters to beginning students while giving those with more background an opportunity to explore more complex aspects of the motion. If students…
▽ More
The spring-mass system studied in undergraduate physics laboratories may show complex dynamics due to the simultaneous action of gravitational, elastic, and torsional forces, in addition to air friction. In this paper, we describe a laboratory exercise that caters to beginning students while giving those with more background an opportunity to explore more complex aspects of the motion. If students are not given predefined apparatus but are allowed to design the experiment setup, they may also learn something about physics thinking and experimental procedure. Using results thus produced, we describe a variety of spring-mass oscillation patterns, discussing the physics of the significant deviations from simple harmonic motion. The parametric oscillation behavior we have observed is reported and investigated. This study is based on analysis of motion waveforms.
△ Less
Submitted 3 June, 2013; v1 submitted 6 August, 2012;
originally announced August 2012.
-
The path and the multi-teaching issues in the coupled pendulum and mass-spring experiments
Authors:
Ilario Boscolo,
Leonardo Gariboldi,
Ruth Loewenstein
Abstract:
The main task of an introductory laboratory course is to foster students' manual, conceptual and statistical ability to investigate physical phenomena. Needing very simple apparatus, pendulum experiments are an ideal starting point in our first-year laboratory course because they are rich in both physical content and data processing. These experiments allow many variations, e.g. pendulum bobs ca…
▽ More
The main task of an introductory laboratory course is to foster students' manual, conceptual and statistical ability to investigate physical phenomena. Needing very simple apparatus, pendulum experiments are an ideal starting point in our first-year laboratory course because they are rich in both physical content and data processing. These experiments allow many variations, e.g. pendulum bobs can have different shapes, threads can be tied to a hook at their edge or pass through their centre of mass, they can be hanged as simple or bifilar pendulums. In these many variations, they emphasize the difference between theory and practice in the passage from an idealized scheme to a real experimental asset, which becomes evident, for example, when the pendulum bob cannot be considered an idealized point mass. Moreover, they require careful observation of details such as the type of thread used and its rigidity or the bob initial slant, which leads to different behaviors. Their mathematical models require a wide range of fundamental topics in experimental data analysis: arithmetic and weighted mean, standard deviation, central limit theorem application, data distribution, and the significant difference between theory and practice. Setting the mass-spring experiment immediately after the pendulum highlights the question of resonance, revises the gap between theory and practice in another context, and provides another occasion to practice further techniques in data analysis.
△ Less
Submitted 8 January, 2009;
originally announced January 2009.
-
Formation Of A Cold Antihydrogen Beam in AEGIS For Gravity Measurements
Authors:
G. Testera,
A. S. Belov,
G. Bonomi,
I. Boscolo,
N. Brambilla,
R. S. Brusa,
V. M. Byakov,
L. Cabaret,
C. Canali,
C. Carraro,
F. Castelli,
S. Cialdi,
M. de Combarieu,
D. Comparat,
G. Consolati,
N. Djourelov,
M. Doser,
G. Drobychev,
A. Dupasquier,
D. Fabris,
R. Ferragut,
G. Ferrari,
A. Fischer,
A. Fontana,
P. Forget
, et al. (40 additional authors not shown)
Abstract:
The formation of the antihydrogen beam in the AEGIS experiment through the use of inhomogeneous electric fields is discussed and simulation results including the geometry of the apparatus and realistic hypothesis about the antihydrogen initial conditions are shown. The resulting velocity distribution matches the requirements of the gravity experiment. In particular it is shown that the inhomogen…
▽ More
The formation of the antihydrogen beam in the AEGIS experiment through the use of inhomogeneous electric fields is discussed and simulation results including the geometry of the apparatus and realistic hypothesis about the antihydrogen initial conditions are shown. The resulting velocity distribution matches the requirements of the gravity experiment. In particular it is shown that the inhomogeneous electric fields provide radial cooling of the beam during the acceleration.
△ Less
Submitted 30 May, 2008;
originally announced May 2008.
-
Apparent superluminal advancement of a single photon far beyond its coherence length
Authors:
S. Cialdi,
I. Boscolo,
F. Castelli,
V. Petrillo
Abstract:
We present experimental results relative to superluminal propagation based on a single photon traversing an optical system, called 4f-system, which acts singularly on the photon's spectral component phases. A single photon is created by a CW laser light down{conversion process. The introduction of a linear spectral phase function will lead to the shift of the photon peak far beyond the coherence…
▽ More
We present experimental results relative to superluminal propagation based on a single photon traversing an optical system, called 4f-system, which acts singularly on the photon's spectral component phases. A single photon is created by a CW laser light down{conversion process. The introduction of a linear spectral phase function will lead to the shift of the photon peak far beyond the coherence length of the photon itself (an apparent superluminal propagation of the photon). Superluminal group velocity detection is done by interferometric measurement of the temporal shifted photon with its correlated untouched reference. The observed superluminal photon propagation complies with causality. The operation of the optical system allows to enlighten the origin of the apparent superluminal photon velocity. The experiment foresees a superluminal effect with single photon wavepackets.
△ Less
Submitted 16 April, 2009; v1 submitted 9 May, 2008;
originally announced May 2008.
-
Measurement of the temporal response of ferroelectric cathodes
Authors:
M. Castellano,
M. Ferrario,
F. Tazzioli,
L. Catani,
L. Giannessi,
I. Boscolo,
S. Cialdi,
M. Valentini
Abstract:
Ferroelectric ceramics are tested as photocathodes at INFN Frascati Laboratories. In order to characterize them for use in linac injectors it is important to measure the temporal shape of the emitted current. With a duration of the laser pulse of 25 ps, the required resolution is a few ps. An apparatus has been set up for the purpose, consisting of a 30 kV electron gun, a microwave deflecting ca…
▽ More
Ferroelectric ceramics are tested as photocathodes at INFN Frascati Laboratories. In order to characterize them for use in linac injectors it is important to measure the temporal shape of the emitted current. With a duration of the laser pulse of 25 ps, the required resolution is a few ps. An apparatus has been set up for the purpose, consisting of a 30 kV electron gun, a microwave deflecting cavity which translates the temporal distribution of the electron bunch into a spatial one, a fluorescent screen on which the deflected beam traces a sector of a circle and various focusing and charge measuring items. The image on the screen is detected via a CCD camera and a frame grabber. We describe the performance of the apparatus and some preliminary temporal distribution measurements.
△ Less
Submitted 21 August, 2000; v1 submitted 26 July, 2000;
originally announced July 2000.
