-
Study of the decay and production properties of $D_{s1}(2536)$ and $D_{s2}^*(2573)$
Authors:
M. Ablikim,
M. N. Achasov,
P. Adlarson,
O. Afedulidis,
X. C. Ai,
R. Aliberti,
A. Amoroso,
Q. An,
Y. Bai,
O. Bakina,
I. Balossino,
Y. Ban,
H. -R. Bao,
V. Batozskaya,
K. Begzsuren,
N. Berger,
M. Berlowski,
M. Bertani,
D. Bettoni,
F. Bianchi,
E. Bianco,
A. Bortone,
I. Boyko,
R. A. Briere,
A. Brueggemann
, et al. (645 additional authors not shown)
Abstract:
The $e^+e^-\rightarrow D_s^+D_{s1}(2536)^-$ and $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ processes are studied using data samples collected with the BESIII detector at center-of-mass energies from 4.530 to 4.946~GeV. The absolute branching fractions of $D_{s1}(2536)^- \rightarrow \bar{D}^{*0}K^-$ and $D_{s2}^*(2573)^- \rightarrow \bar{D}^0K^-$ are measured for the first time to be…
▽ More
The $e^+e^-\rightarrow D_s^+D_{s1}(2536)^-$ and $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ processes are studied using data samples collected with the BESIII detector at center-of-mass energies from 4.530 to 4.946~GeV. The absolute branching fractions of $D_{s1}(2536)^- \rightarrow \bar{D}^{*0}K^-$ and $D_{s2}^*(2573)^- \rightarrow \bar{D}^0K^-$ are measured for the first time to be $(35.9\pm 4.8\pm 3.5)\%$ and $(37.4\pm 3.1\pm 4.6)\%$, respectively. The measurements are in tension with predictions based on the assumption that the $D_{s1}(2536)$ and $D_{s2}^*(2573)$ are dominated by a bare $c\bar{s}$ component. The $e^+e^-\rightarrow D_s^+D_{s1}(2536)^-$ and $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ cross sections are measured, and a resonant structure at around 4.6~GeV with a width of 50~MeV is observed for the first time with a statistical significance of $15σ$ in the $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ process. It could be the $Y(4626)$ found by the Belle collaboration in the $D_s^+D_{s1}(2536)^{-}$ final state, since they have similar masses and widths. There is also evidence for a structure at around 4.75~GeV in both processes.
△ Less
Submitted 10 July, 2024;
originally announced July 2024.
-
Impact of the Top SiO2 Interlayer Thickness on Memory Window of Si Channel FeFET with TiN/SiO2/Hf0.5Zr0.5O2/SiOx/Si (MIFIS) Gate Structure
Authors:
Tao Hu,
Xianzhou Shao,
Mingkai Bai,
Xinpei Jia,
Saifei Dai,
Xiaoqing Sun,
Runhao Han,
Jia Yang,
Xiaoyu Ke,
Fengbin Tian,
Shuai Yang,
Junshuai Chai,
Hao Xu,
Xiaolei Wang,
Wenwu Wang,
Tianchun Ye
Abstract:
We study the impact of top SiO2 interlayer thickness on the memory window (MW) of Si channel ferroelectric field-effect transistor (FeFET) with TiN/SiO2/Hf0.5Zr0.5O2/SiOx/Si (MIFIS) gate structure. We find that the MW increases with the increasing thickness of the top SiO2 interlayer, and such an increase exhibits a two-stage linear dependence. The physical origin is the presence of the different…
▽ More
We study the impact of top SiO2 interlayer thickness on the memory window (MW) of Si channel ferroelectric field-effect transistor (FeFET) with TiN/SiO2/Hf0.5Zr0.5O2/SiOx/Si (MIFIS) gate structure. We find that the MW increases with the increasing thickness of the top SiO2 interlayer, and such an increase exhibits a two-stage linear dependence. The physical origin is the presence of the different interfacial charges trapped at the top SiO2/Hf0.5Zr0.5O2 interface. Moreover, we investigate the dependence of endurance characteristics on initial MW. We find that the endurance characteristic degrades with increasing the initial MW. By inserting a 3.4 nm SiO2 dielectric interlayer between the gate metal TiN and the ferroelectric Hf0.5Zr0.5O2, we achieve a MW of 6.3 V and retention over 10 years. Our work is helpful in the device design of FeFET.
△ Less
Submitted 16 June, 2024;
originally announced June 2024.
-
Silicon-integrated scandium-doped aluminum nitride electro-optic modulator
Authors:
Tianqi Xu,
Yushuai Liu,
Yuanmao Pu,
Yongxiang Yang,
Qize Zhong,
Xingyan Zhao,
Yang Qiu,
Yuan Dong,
Tao Wu,
Shaonan Zheng,
Ting Hu
Abstract:
Scandium-doped aluminum nitride (AlScN) with an asymmetric hexagonal wurtzite structure exhibits enhanced second-order nonlinear and piezoelectric properties compared to aluminum nitride (AlN), while maintaining a relatively large bandgap. It provides a promising platform for photonic integration and facilitates the seamless integration of passive and active functional devices. Here, we present th…
▽ More
Scandium-doped aluminum nitride (AlScN) with an asymmetric hexagonal wurtzite structure exhibits enhanced second-order nonlinear and piezoelectric properties compared to aluminum nitride (AlN), while maintaining a relatively large bandgap. It provides a promising platform for photonic integration and facilitates the seamless integration of passive and active functional devices. Here, we present the design, fabrication, and characterization of AlScN EO micro-ring modulators, introducing active functionalities to the chip-scale AlScN platform. These waveguide-integrated EO modulators employ sputtered AlScN thin films as the light-guiding medium, and the entire fabrication process is compatible with complementary metal oxide semiconductor (CMOS) technology. We characterize the high-frequency performance of an AlScN modulator for the first time, extracting a maximum in-device effective EO coefficient of 2.86 pm/V at 12 GHz. The devices show a minimum half-wave voltage-length product of 3.12 V*cm and a 3-dB modulation bandwidth of approximately 22 GHz. Our work provides a promising modulation scheme for cost-effective silicon-integrated photonics systems.
△ Less
Submitted 28 May, 2024;
originally announced May 2024.
-
A practical approach of measuring $^{238}$U and $^{232}$Th in liquid scintillator to sub-ppq level using ICP-MS
Authors:
Yuanxia Li,
Jie Zhao,
Yayun Ding,
Tao Hu,
Jiaxuan Ye,
Jian Fang,
Liangjian Wen
Abstract:
Liquid scintillator (LS) is commonly utilized in experiments seeking rare events due to its high light yield, transparency, and radiopurity. The concentration of $^{238}$U and $^{232}$Th in LS consistently remains below 1 ppq (10$^{-15}$ g/g), and the current screening result is based on a minimum 20-ton detector. Inductively coupled plasma mass (ICP-MS) spectroscopy is well-regarded for its high…
▽ More
Liquid scintillator (LS) is commonly utilized in experiments seeking rare events due to its high light yield, transparency, and radiopurity. The concentration of $^{238}$U and $^{232}$Th in LS consistently remains below 1 ppq (10$^{-15}$ g/g), and the current screening result is based on a minimum 20-ton detector. Inductively coupled plasma mass (ICP-MS) spectroscopy is well-regarded for its high sensitivity to trace $^{238}$U and $^{232}$Th. This study outlines a method for detecting $^{238}$U and $^{232}$Th in LS at the sub-ppq level using ICP-MS, involving the enrichment of $^{238}$U/$^{232}$Th from the LS through acid extraction. With meticulous cleanliness control, $^{238}$U/$^{232}$Th in approximately 2 kg of LS is concentrated by acid extraction with 0.4 (0.3) pg $^{238}$U ($^{232}$Th) contamination. Three standard adding methods are employed to assess recovery efficiency, including radon daughter, 2,5-diphenyloxazole (PPO), and natural non-existent $^{233}$U/$^{229}$Th. The method detection limit at a 99% confidence level of this approach can reach approximately 0.2-0.3 ppq for $^{238}$U/$^{232}$Th with nearly 100% recovery efficiency.
△ Less
Submitted 10 May, 2024;
originally announced May 2024.
-
Impact of Top SiO2 interlayer Thickness on Memory Window of Si Channel FeFET with TiN/SiO2/Hf0.5Zr0.5O2/SiOx/Si (MIFIS) Gate Structure
Authors:
Tao Hu,
Xianzhou Shao,
Mingkai Bai,
Xinpei Jia,
Saifei Dai,
Xiaoqing Sun,
Runhao Han,
Jia Yang,
Xiaoyu Ke,
Fengbin Tian,
Shuai Yang,
Junshuai Chai,
Hao Xu,
Xiaolei Wang,
Wenwu Wang,
Tianchun Ye
Abstract:
We study the impact of top SiO2 interlayer thickness on memory window of Si channel FeFET with TiN/SiO2/Hf0.5Zr0.5O2/SiOx/Si (MIFIS) gate structure. The memory window increases with thicker top SiO2. We realize the memory window of 6.3 V for 3.4 nm top SiO2. Moreover, we find that the endurance characteristic degrades with increasing the initial memory window.
We study the impact of top SiO2 interlayer thickness on memory window of Si channel FeFET with TiN/SiO2/Hf0.5Zr0.5O2/SiOx/Si (MIFIS) gate structure. The memory window increases with thicker top SiO2. We realize the memory window of 6.3 V for 3.4 nm top SiO2. Moreover, we find that the endurance characteristic degrades with increasing the initial memory window.
△ Less
Submitted 24 April, 2024;
originally announced April 2024.
-
Ion Kinetics and Neutron Generation Associated with Electromagnetic Turbulence in Laboratory-scale Counter-streaming Plasmas
Authors:
P. Liu,
D. Wu,
T. X. Hu,
D. W. Yuan,
G. Zhao,
Z. M. Sheng,
X. T. He,
J. Zhang
Abstract:
Electromagnetic turbulence and ion kinetics in counter-streaming plasmas hold great significance in laboratory astrophysics, such as turbulence field amplification and particle energization. Here, we quantitatively demonstrate for the first time how electromagnetic turbulence affects ion kinetics under achievable laboratory conditions (millimeter-scale interpenetrating plasmas with initial velocit…
▽ More
Electromagnetic turbulence and ion kinetics in counter-streaming plasmas hold great significance in laboratory astrophysics, such as turbulence field amplification and particle energization. Here, we quantitatively demonstrate for the first time how electromagnetic turbulence affects ion kinetics under achievable laboratory conditions (millimeter-scale interpenetrating plasmas with initial velocity of $2000\ \mathrm{km/s}$, density of $4 \times 10^{19}\ \mathrm{cm}^{-3}$, and temperature of $100\ \mathrm{eV}$) utilizing a recently developed high-order implicit particle-in-cell code without scaling transformation. It is found that the electromagnetic turbulence is driven by ion two-stream and filamentation instabilities. For the magnetized scenarios where an applied magnetic field of tens of Tesla is perpendicular to plasma flows, the growth rates of instabilities increase with the strengthening of applied magnetic field, which therefore leads to a significant enhancement of turbulence fields. Under the competition between the stochastic acceleration due to electromagnetic turbulence and collisional thermalization, ion distribution function shows a distinct super-Gaussian shape, and the ion kinetics are manifested in neutron yields and spectra. Our results have well explained the recent unmagnetized experimental observations, and the findings of magnetized scenario can be verified by current astrophysical experiments.
△ Less
Submitted 12 March, 2024;
originally announced March 2024.
-
Extended Time-Dependent Density Functional Theory for Multi-Body Densities
Authors:
Jiong-Hang Liang,
Tian-Xing Hu,
D. Wu,
Zheng-Mao Sheng,
J. Zhang
Abstract:
Time-dependent density functional theory (TDDFT) is widely used for understanding and predicting properties and behaviors of matter. As one of the fundamental theorems in TDDFT, van Leeuwen's theorem [Phys. Rev. Lett. 82, 3863 (1999)] guarantees how to construct a unique potential with the same one-body density evolution. Here we extend van Leeuwen's theorem by exploring truncation criteria in BBG…
▽ More
Time-dependent density functional theory (TDDFT) is widely used for understanding and predicting properties and behaviors of matter. As one of the fundamental theorems in TDDFT, van Leeuwen's theorem [Phys. Rev. Lett. 82, 3863 (1999)] guarantees how to construct a unique potential with the same one-body density evolution. Here we extend van Leeuwen's theorem by exploring truncation criteria in BBGKY-hierarchy. Our generalized theorem demonstrates the existence of a unique non-local potential to accurately reconstruct the multi-body density evolution in binary interacting systems. Under non-stringent conditions, truncation of the BBGKY-hierarchy equations aligns with the behavior of multi-body density evolution, and maintains consistency in the reduced equations. As one of applications within the extended TDDFT supported by our theorem, multiple excitation energy can be typically solved as the eigenvalue of a generalized Casida's equation. The extended TDDFT provides an accurate and first-principle framework capable of describing the kinetic processes of correlated system, including strongly coupled particle transport, multiple excitation and ionization processes.
△ Less
Submitted 7 March, 2024;
originally announced March 2024.
-
Exact Normal Modes of Quantum Plasmas
Authors:
Tian-Xing Hu,
Dong Wu,
Z. M. Sheng,
J. Zhang
Abstract:
The normal modes, i.e., the eigen solutions to the dispersion relation equation, are the most fundamental properties of a plasma, which also of key importance to many nonlinear effects such as parametric and two-plasmon decay, and Raman scattering. The real part indicates the intrinsic oscillation frequency while the imaginary part the Landau damping rate. In most of the literatures, the normal mo…
▽ More
The normal modes, i.e., the eigen solutions to the dispersion relation equation, are the most fundamental properties of a plasma, which also of key importance to many nonlinear effects such as parametric and two-plasmon decay, and Raman scattering. The real part indicates the intrinsic oscillation frequency while the imaginary part the Landau damping rate. In most of the literatures, the normal modes of quantum plasmas are obtained by means of small damping approximation (SDA), which is invalid for high-$k$ modes. In this paper, we solve the exact dispersion relations via the analytical continuation (AC) scheme, and, due to the multi-value nature of the Fermi-Dirac distribution, reformation of the complex Riemann surface is required. It is found that the change of the topological shape of the root locus in quantum plasmas is quite different from classical plasmas, in which both real and imaginary frequencies of high-$k$ modes increase with $k$ in a steeper way than the typical linear behaviour as appears in classical plasmas. As a result, the temporal evolution of a high-$k$ perturbation in quantum plasmas is dominated by the ballistic modes.
△ Less
Submitted 22 January, 2024;
originally announced January 2024.
-
Validation of Classical Transport Cross Section for Ion-Ion Interactions Under Repulsive Yukawa Potential
Authors:
Tian-Xing Hu,
Dong Wu,
C. L. Lin,
Z. M. Sheng,
B. He,
J. Zhang
Abstract:
Value of cross section is a fundamental parameter to depict the transport of charged particles in matters. Due to masses of orders of magnitude higher than electrons and convenience of realistic calculation, the cross section of elastic nuclei-nuclei collision is usually treated via classical mechanics. The famous Bohr criterion was firstly proposed to judge whether the treatment via classical mec…
▽ More
Value of cross section is a fundamental parameter to depict the transport of charged particles in matters. Due to masses of orders of magnitude higher than electrons and convenience of realistic calculation, the cross section of elastic nuclei-nuclei collision is usually treated via classical mechanics. The famous Bohr criterion was firstly proposed to judge whether the treatment via classical mechanics is reliable or not. Later, Lindhard generalized the results of Coulomb to screening potentials. Considering the increasing importance of detailed ion-ion interactions under modern simulation codes in inertial confinement fusion (ICF) researches, the validation of classical transport cross section for ion-ion interactions in a big range of parameter space is certainly required. In this work, the transport cross sections via classical mechanics under repulsive Yukawa potential are compared with those via quantum mechanics. Differences of differential cross sections are found with respect to scattering angles and velocities. Our results generally indicate that the classical picture fails at the cases of both low and high velocities, which represent a significant extension of the famous Bohr criterion and its generalized variations. Furthermore, the precise validation zones of classical picture is also analysed in this work. This work is of significant importance for benchmarking the modern ion-kinetic simulation codes in ICF researches, concerning the stopping power of $α$ particles in DT fuels, ion-ion friction and viscous effects in the formation of kinetic shocks.
△ Less
Submitted 22 January, 2024;
originally announced January 2024.
-
Enlargement of Memory Window of Si Channel FeFET by Inserting Al2O3 Interlayer on Ferroelectric Hf0.5Zr0.5O2
Authors:
Tao Hu,
Xiaoqing Sun,
Mingkai Bai,
Xinpei Jia,
Saifei Dai,
Tingting Li,
Runhao Han,
Yajing Ding,
Hongyang Fan,
Yuanyuan Zhao,
Junshuai Chai,
Hao Xu,
Mengwei Si,
Xiaolei Wang,
Wenwu Wang
Abstract:
In this work, we demonstrate the enlargement of the memory window of Si channel FeFET with ferroelectric Hf0.5Zr0.5O2 by gate-side dielectric interlayer engineering. By inserting an Al2O3 dielectric interlayer between TiN gate metal and ferroelectric Hf0.5Zr0.5O2, we achieve a memory window of 3.2 V with endurance of ~105 cycles and retention over 10 years. The physical origin of memory window enl…
▽ More
In this work, we demonstrate the enlargement of the memory window of Si channel FeFET with ferroelectric Hf0.5Zr0.5O2 by gate-side dielectric interlayer engineering. By inserting an Al2O3 dielectric interlayer between TiN gate metal and ferroelectric Hf0.5Zr0.5O2, we achieve a memory window of 3.2 V with endurance of ~105 cycles and retention over 10 years. The physical origin of memory window enlargement is clarified to be charge trapping at the Al2O3/Hf0.5Zr0.5O2 interface, which has an opposite charge polarity to the trapped charges at the Hf0.5Zr0.5O2/SiOx interface.
△ Less
Submitted 28 December, 2023;
originally announced December 2023.
-
Unveiling the origins of quasi-phase matching spectral imperfections in thin-film lithium niobate frequency doublers
Authors:
Jie Zhao,
Xiaoting Li,
Ting-Chen Hu,
Ayed Al Sayem,
Haochuan Li,
Al Tate,
Kwangwoong Kim,
Rose Kopf,
Pouria Sanjari,
Mark Earnshaw,
Nicolas K. Fontaine,
Cheng Wang,
Andrea Blanco-Redondo
Abstract:
Thin-film lithium niobate (TFLN) based frequency doublers have been widely recognized as essential components for both classical and quantum optical communications. Nonetheless, the efficiency of these devices is hindered by imperfections present in the quasi-phase matching (QPM) spectrum. In this study, we present a thorough analysis of the spectral imperfections in TFLN frequency doublers with v…
▽ More
Thin-film lithium niobate (TFLN) based frequency doublers have been widely recognized as essential components for both classical and quantum optical communications. Nonetheless, the efficiency of these devices is hindered by imperfections present in the quasi-phase matching (QPM) spectrum. In this study, we present a thorough analysis of the spectral imperfections in TFLN frequency doublers with varying lengths, ranging from 5 mm to 15 mm. Employing a non-destructive diagnostic method based on scattered light imaging, we identify the sources and waveguide sections that contribute to the imperfections in the QPM spectrum. Furthermore, by mapping the TFLN film thickness across the entire waveguiding regions, we successfully reproduce the QPM spectra numerically, thus confirming the prominent influence of film thickness variations on the observed spectral imperfections. This comprehensive investigation provides valuable insights into the identification and mitigation of spectral imperfections in TFLN-based frequency doublers, paving the way toward the realization of nonlinear optical devices with enhanced efficiency and improved spectral fidelity.
△ Less
Submitted 13 July, 2023;
originally announced July 2023.
-
Design of a vector multi-foci metalens for full stokes imaging polarimetry
Authors:
Shuyi Wang,
Tie Hu,
Shichuan Wang,
Ming Zhao,
Zhenyu Yang
Abstract:
Imaging polarimetry based on dielectric metasurface is well-known for its ultra-compactness and high integration. However, previous works suffer from low energy efficiency, limited restrictions on choice of target polarization states, or inability to focus light. Here, by inverse design, we numerically demonstrate a multi-foci metalens-based polarimetry that can simultaneously separate and focus t…
▽ More
Imaging polarimetry based on dielectric metasurface is well-known for its ultra-compactness and high integration. However, previous works suffer from low energy efficiency, limited restrictions on choice of target polarization states, or inability to focus light. Here, by inverse design, we numerically demonstrate a multi-foci metalens-based polarimetry that can simultaneously separate and focus the four free-chosen elliptical polarization states at the wavelength of 10.6 μm. Such a full-stokes polarimetry features an average absolute efficiency up to 54.63%, and an average relative error as low as 0.00137%. This spatial-multiplexing-free full stokes polarimetry exceeds the theoretical maximum efficiency of traditional polarization-filtering counterparts, and resolves the restriction faced by the orthogonal polarization-multiplexed method.
△ Less
Submitted 4 July, 2023;
originally announced July 2023.
-
Status of the muEDM experiment at PSI
Authors:
Kim Siang Khaw,
Cheng Chen,
Massimo Giovannozzi,
Tianqi Hu,
Meng Lv,
Jun Kai Ng,
Angela Papa,
Philipp Schmidt-Wellenburg,
Bastiano Vitali,
Guan Ming Wong
Abstract:
Permanent electric dipole moments (EDMs) are excellent probes of physics beyond the Standard Model, especially on new sources of CP violation. The muon EDM has recently attracted significant attention due to discrepancies in the magnetic anomaly of the muon, as well as potential violations of lepton-flavor universality in B-meson decays. At the Paul Scherrer Institute in Switzerland, we have propo…
▽ More
Permanent electric dipole moments (EDMs) are excellent probes of physics beyond the Standard Model, especially on new sources of CP violation. The muon EDM has recently attracted significant attention due to discrepancies in the magnetic anomaly of the muon, as well as potential violations of lepton-flavor universality in B-meson decays. At the Paul Scherrer Institute in Switzerland, we have proposed a muon EDM search experiment employing the frozen-spin technique, where a radial electric field is exerted within a storage solenoid to cancel the muon's anomalous spin precession. Consequently, the EDM signal can be inferred from the upstream-downstream asymmetry of the decay positron count versus time. The experiment is planned to take place in two phases, anticipating an annual statistical sensitivity of $3\times10^{-21}$ $e\cdot$cm for Phase~I, and $6\times10^{-23}$ $e\cdot$cm for Phase~II. Going beyond $10^{-21}$ $e\cdot$cm will enable us to probe various Standard Model extensions.
△ Less
Submitted 4 July, 2023;
originally announced July 2023.
-
A surface-normal photodetector as nonlinear activation function in diffractive optical neural networks
Authors:
Farshid Ashtiani,
Mohamad Hossein Idjadi,
Ting-Chen Hu,
Stefano Grillanda,
David Neilson,
Mark Earnshaw,
Mark Cappuzzo,
Rose Kopf,
Alaric Tate,
Andrea Blanco-Redondo
Abstract:
Optical neural networks (ONNs) enable high speed parallel and energy efficient processing compared to conventional digital electronic counterparts. However, realizing large scale systems is an open problem. Among various integrated and non-integrated ONNs, free-space diffractive ONNs benefit from a large number of pixels of spatial light modulators to realize millions of neurons. However, a signif…
▽ More
Optical neural networks (ONNs) enable high speed parallel and energy efficient processing compared to conventional digital electronic counterparts. However, realizing large scale systems is an open problem. Among various integrated and non-integrated ONNs, free-space diffractive ONNs benefit from a large number of pixels of spatial light modulators to realize millions of neurons. However, a significant fraction of computation time and energy is consumed by the nonlinear activation function that is typically implemented using a camera sensor. Here, we propose a novel surface-normal photodetector (SNPD) with a nonlinear response to replace the camera sensor that enables about three orders of magnitude faster (5.7 us response time) and more energy efficient (less than 10 nW/pixel) response. Direct efficient vertical optical coupling, polarization insensitivity, inherent nonlinearity with no control electronics, low optical power requirements, and the possibility of implementing large scale arrays make the SNPD a promising nonlinear activation function for diffractive ONNs. To show the applicability, successful classification simulation of MNIST and Fashion MNIST datasets using the measured response of SNPD with accuracy comparable to that of an ideal ReLU function are demonstrated.
△ Less
Submitted 5 May, 2023;
originally announced May 2023.
-
A high-efficiency proton-boron fusion scheme taking into account the effects of quantum degeneracy
Authors:
S. J. Liu,
D. Wu,
T. X. Hu,
T. Y. Liang,
X. C. Ning,
J. H. Liang,
Y. C. Liu,
P. Liu,
X. Liu,
Z. M. Sheng,
Y. T. Zhao,
D. H. H. Hoffmann,
X. T. He,
J. Zhang
Abstract:
The proton-boron (p-$^{11}$B) reaction is regarded as the holy grail of advanced fusion fuels, since the primary reaction produces three $α$ particles with few neutrons and induced radio-activities from second order reactions. Compared to the Deuterium-Tritium reaction a much higher reaction temperature is required. Moreover, bremsstrahlung energy losses due to the high nuclear charge of boron dee…
▽ More
The proton-boron (p-$^{11}$B) reaction is regarded as the holy grail of advanced fusion fuels, since the primary reaction produces three $α$ particles with few neutrons and induced radio-activities from second order reactions. Compared to the Deuterium-Tritium reaction a much higher reaction temperature is required. Moreover, bremsstrahlung energy losses due to the high nuclear charge of boron deem it seemingly apparent than a fusion reactor based on Deuterium-Tritium plasma in equilibrium is to say the least very difficult.It is becoming more appealing to collide intense laser beams or accelerated proton beams with a boron target to produce p-$^{11}$B reactions. The fusion yield of p-$^{11}$B reactions is closely related to proton beam parameters and boron target conditions such as density, temperature, and ingredients. Quantum degeneracy will increase fusion yields by reducing the stopping power of injected protons. In this work, we suggest a high-efficiency scheme for beam-target p-$^{11}$B fusions via injecting a MeV proton beam into a highly compressed quantum degenerated boron target. Such a boron target can be achieved via quasi-isentropic compression of solid boron by using precisely shaped laser pulses. Our results indicate that for densities ranging from $10^3$ to $10^4ρ_s$, where $ρ_s$ is the density of solid boron, contributions of bound and free electrons to the stopping of protons can be completely disregarded and dramatically reduced respectively. The result is an increase in fusion yield by orders of magnitude. Furthermore, in order to achieve multiplication factor $F$ greater than one, with $F$ defined as the ratio of output fusion energy to the energy of injected protons, it is found there exits a minimum possible density of boron target, which is $2.15 \times 10^4 ρ_s$ when the kinetic energy of injected protons is $0.8$ MeV.
△ Less
Submitted 17 April, 2023;
originally announced April 2023.
-
The JUNO experiment Top Tracker
Authors:
JUNO Collaboration,
Angel Abusleme,
Thomas Adam,
Shakeel Ahmad,
Rizwan Ahmed,
Sebastiano Aiello,
Muhammad Akram,
Abid Aleem,
Tsagkarakis Alexandros,
Fengpeng An,
Qi An,
Giuseppe Andronico,
Nikolay Anfimov,
Vito Antonelli,
Tatiana Antoshkina,
Burin Asavapibhop,
João Pedro Athayde Marcondes de André,
Didier Auguste,
Weidong Bai,
Nikita Balashov,
Wander Baldini,
Andrea Barresi,
Davide Basilico,
Eric Baussan,
Marco Bellato
, et al. (592 additional authors not shown)
Abstract:
The main task of the Top Tracker detector of the neutrino reactor experiment Jiangmen Underground Neutrino Observatory (JUNO) is to reconstruct and extrapolate atmospheric muon tracks down to the central detector. This muon tracker will help to evaluate the contribution of the cosmogenic background to the signal. The Top Tracker is located above JUNO's water Cherenkov Detector and Central Detector…
▽ More
The main task of the Top Tracker detector of the neutrino reactor experiment Jiangmen Underground Neutrino Observatory (JUNO) is to reconstruct and extrapolate atmospheric muon tracks down to the central detector. This muon tracker will help to evaluate the contribution of the cosmogenic background to the signal. The Top Tracker is located above JUNO's water Cherenkov Detector and Central Detector, covering about 60% of the surface above them. The JUNO Top Tracker is constituted by the decommissioned OPERA experiment Target Tracker modules. The technology used consists in walls of two planes of plastic scintillator strips, one per transverse direction. Wavelength shifting fibres collect the light signal emitted by the scintillator strips and guide it to both ends where it is read by multianode photomultiplier tubes. Compared to the OPERA Target Tracker, the JUNO Top Tracker uses new electronics able to cope with the high rate produced by the high rock radioactivity compared to the one in Gran Sasso underground laboratory. This paper will present the new electronics and mechanical structure developed for the Top Tracker of JUNO along with its expected performance based on the current detector simulation.
△ Less
Submitted 9 March, 2023;
originally announced March 2023.
-
JUNO sensitivity to $^7$Be, $pep$, and CNO solar neutrinos
Authors:
Angel Abusleme,
Thomas Adam,
Shakeel Ahmad,
Rizwan Ahmed,
Sebastiano Aiello,
Muhammad Akram,
Abid Aleem,
Tsagkarakis Alexandros,
Fengpeng An,
Qi An,
Giuseppe Andronico,
Nikolay Anfimov,
Vito Antonelli,
Tatiana Antoshkina,
Burin Asavapibhop,
João Pedro Athayde Marcondes de André,
Didier Auguste,
Weidong Bai,
Nikita Balashov,
Wander Baldini,
Andrea Barresi,
Davide Basilico,
Eric Baussan,
Marco Bellato,
Marco Beretta
, et al. (592 additional authors not shown)
Abstract:
The Jiangmen Underground Neutrino Observatory (JUNO), the first multi-kton liquid scintillator detector, which is under construction in China, will have a unique potential to perform a real-time measurement of solar neutrinos well below the few MeV threshold typical for Water Cherenkov detectors. JUNO's large target mass and excellent energy resolution are prerequisites for reaching unprecedented…
▽ More
The Jiangmen Underground Neutrino Observatory (JUNO), the first multi-kton liquid scintillator detector, which is under construction in China, will have a unique potential to perform a real-time measurement of solar neutrinos well below the few MeV threshold typical for Water Cherenkov detectors. JUNO's large target mass and excellent energy resolution are prerequisites for reaching unprecedented levels of precision. In this paper, we provide estimation of the JUNO sensitivity to 7Be, pep, and CNO solar neutrinos that can be obtained via a spectral analysis above the 0.45 MeV threshold. This study is performed assuming different scenarios of the liquid scintillator radiopurity, ranging from the most opti mistic one corresponding to the radiopurity levels obtained by the Borexino experiment, up to the minimum requirements needed to perform the neutrino mass ordering determination with reactor antineutrinos - the main goal of JUNO. Our study shows that in most scenarios, JUNO will be able to improve the current best measurements on 7Be, pep, and CNO solar neutrino fluxes. We also perform a study on the JUNO capability to detect periodical time variations in the solar neutrino flux, such as the day-night modulation induced by neutrino flavor regeneration in Earth, and the modulations induced by temperature changes driven by helioseismic waves.
△ Less
Submitted 7 March, 2023;
originally announced March 2023.
-
Solving High-Dimensional PDEs with Latent Spectral Models
Authors:
Haixu Wu,
Tengge Hu,
Huakun Luo,
Jianmin Wang,
Mingsheng Long
Abstract:
Deep models have achieved impressive progress in solving partial differential equations (PDEs). A burgeoning paradigm is learning neural operators to approximate the input-output mappings of PDEs. While previous deep models have explored the multiscale architectures and various operator designs, they are limited to learning the operators as a whole in the coordinate space. In real physical science…
▽ More
Deep models have achieved impressive progress in solving partial differential equations (PDEs). A burgeoning paradigm is learning neural operators to approximate the input-output mappings of PDEs. While previous deep models have explored the multiscale architectures and various operator designs, they are limited to learning the operators as a whole in the coordinate space. In real physical science problems, PDEs are complex coupled equations with numerical solvers relying on discretization into high-dimensional coordinate space, which cannot be precisely approximated by a single operator nor efficiently learned due to the curse of dimensionality. We present Latent Spectral Models (LSM) toward an efficient and precise solver for high-dimensional PDEs. Going beyond the coordinate space, LSM enables an attention-based hierarchical projection network to reduce the high-dimensional data into a compact latent space in linear time. Inspired by classical spectral methods in numerical analysis, we design a neural spectral block to solve PDEs in the latent space that approximates complex input-output mappings via learning multiple basis operators, enjoying nice theoretical guarantees for convergence and approximation. Experimentally, LSM achieves consistent state-of-the-art and yields a relative gain of 11.5% averaged on seven benchmarks covering both solid and fluid physics. Code is available at https://github.com/thuml/Latent-Spectral-Models.
△ Less
Submitted 29 May, 2023; v1 submitted 29 January, 2023;
originally announced January 2023.
-
Direct van der Waals simulation (DVS) of phase-transforming fluids
Authors:
Tianyi Hu,
Hao Wang,
Hector Gomez
Abstract:
We present the method of Direct van der Waals simulation (DVS) to study computationally flows with liquid-vapor phase transformations. Our approach is based on a novel discretization of the Navier-Stokes-Korteweg equations, that couple flow dynamics with van der Waals' non-equilibrium thermodynamic theory of phase transformations, and opens an opportunity for first-principles simulation of a wide…
▽ More
We present the method of Direct van der Waals simulation (DVS) to study computationally flows with liquid-vapor phase transformations. Our approach is based on a novel discretization of the Navier-Stokes-Korteweg equations, that couple flow dynamics with van der Waals' non-equilibrium thermodynamic theory of phase transformations, and opens an opportunity for first-principles simulation of a wide range of boiling and cavitating flows. The proposed algorithm enables unprecedented simulations of the Navier-Stokes-Korteweg equations involving cavitating flows at strongly under-critical conditions and $\mathcal{O}(10^5)$ Reynolds number. The proposed technique provides a pathway for fundamental understanding of phase-transforming flows with multiple applications in science, engineering, and medicine.
△ Less
Submitted 4 December, 2022;
originally announced December 2022.
-
A centimeter-scale achromatic hybrid metalens with polarization-insensitivity in the visible
Authors:
Tie Hu,
Shengqi Wang,
Yunxuan Wei,
Liqing Wen,
Xing Feng,
Ming Zhao,
Zhenyu Yang
Abstract:
Metalenses, featuring ultra-compactness and CMOS compatibility, are limited by the compromise between the diameter, numerical aperture, and working waveband. To address this problem, we propose and numerically demonstrate a centimeter-scale metasurface-refractive hybrid metalens working in the band of 440 - 700 nm. Revisiting the general Snell law, we present the phase profile of a chromatic aberr…
▽ More
Metalenses, featuring ultra-compactness and CMOS compatibility, are limited by the compromise between the diameter, numerical aperture, and working waveband. To address this problem, we propose and numerically demonstrate a centimeter-scale metasurface-refractive hybrid metalens working in the band of 440 - 700 nm. Revisiting the general Snell law, we present the phase profile of a chromatic aberration correction metasurface that can apply to a plano-convex refractive lens of an arbitrary surface type. Simulated by our semi-vector method, the designed achromatic hybrid metalens achieves 81% chromatic aberration suppression and polarization insensitivity. Broadband imaging results of the hybrid metalens are further provided, verifying the achromatism of the designed hybrid metalens. It can find applications in camera lenses and other optical systems that need compact, high-performance lenses.
△ Less
Submitted 31 October, 2022;
originally announced October 2022.
-
Unveiling the spontaneous conversion of layered MAX phases to 2D MXenes
Authors:
Tao Hu,
Shihao Zhu,
Zhaojin Li,
Da Li,
Hongyang Liu,
Chao Zhang,
Xiaohui Wang
Abstract:
Topochemically transforming layered non-van der Waals solid into two dimensional (2D) materials involves selective etching reactions with atomic precision. The element-specific, structure-sensitive etching at nanoscale urgently requires in-depth understanding. Here, by means of density functional theory calculations and a laboratory-made operando reaction monitoring platform, the mechanism of inst…
▽ More
Topochemically transforming layered non-van der Waals solid into two dimensional (2D) materials involves selective etching reactions with atomic precision. The element-specific, structure-sensitive etching at nanoscale urgently requires in-depth understanding. Here, by means of density functional theory calculations and a laboratory-made operando reaction monitoring platform, the mechanism of instantaneous transforming MAX phase into MXenes is unraveled. The overall etching kinetics exhibits a sigmoidal curve, following self-accelerating reaction character with a small activation energy of ca. 60 kJ/mol. Interestingly, this activation energy corresponds to the Al transport through Ti3C2 slits. Therefore the reaction of Al with hydrofluoric acid solution in the confined interlayer space is recognized as the rate-determining step. Last but not the least, we found that the match of A element and etchants to form stable products is critical for the etching reaction, and reaction energy derived from the thermodynamics provides an easy yet effective descriptor for screening efficient etchants.
△ Less
Submitted 5 August, 2022;
originally announced August 2022.
-
Design of an achromatic zoom metalens doublet in the visible
Authors:
Tie Hu,
Xing Feng,
Yuanxuan Wei,
Shengqi Wang,
Yuhong Wei,
Zhenyu Yang,
Ming Zhao
Abstract:
Zoom metalens doublet exhibits unprecedented advantages over the traditional zoom lens in many aspects, like ultra-compactness, CMOS compatibility, and miniaturization. However, most of them can only work in a narrow band due to chromatic aberration. Here, we numerically demonstrate a broadband achromatic zoom metalens doublet inspired by the Moiré lens principle. This design is achieved by global…
▽ More
Zoom metalens doublet exhibits unprecedented advantages over the traditional zoom lens in many aspects, like ultra-compactness, CMOS compatibility, and miniaturization. However, most of them can only work in a narrow band due to chromatic aberration. Here, we numerically demonstrate a broadband achromatic zoom metalens doublet inspired by the Moiré lens principle. This design is achieved by globally optimizing the multi-wavelength phase profiles of the metalens doublet in the visible. The doublet can achieve achromatic continuous 1-10 zoom range at wavelengths of 440 nm, 540 nm, and 640 nm, featuring high focusing efficiency up to 86.5% and polarization insensitivity.
△ Less
Submitted 31 October, 2022; v1 submitted 17 June, 2022;
originally announced June 2022.
-
Phase-Only Holographic Assisted Planar Printing for Massively Multiplexed Optical Display and Encryption
Authors:
Yunxuan Wei,
Tie Hu,
Xing Feng,
Ming Zhao,
Zhenyu Yang
Abstract:
Multiplexed planar printings, made of single or few layer micro and nano optical platforms, are essential for high capacity display, information storage and encryption. Although having been developed rapidly, the demonstrated channels are still limited and also lack instantaneity. Here, holograms and printings, always regarded as two independent information coding domains with totally different pr…
▽ More
Multiplexed planar printings, made of single or few layer micro and nano optical platforms, are essential for high capacity display, information storage and encryption. Although having been developed rapidly, the demonstrated channels are still limited and also lack instantaneity. Here, holograms and printings, always regarded as two independent information coding domains with totally different principles, are combined together through our proposed angle multiplexing framework, leading to multiplexed printings with hundreds of channels. Based on such approach, we experimentally encode respectively 25 gray scale printings into 25 angles and even 8 gray scale videos into 8 angles with a phase-only spatial light modulator. As a bridge between printings and holograms, our method allows to generate printings combining various holographic methods. Beneficial from this, we demonstrate a gradient metasurface based 324 channel printing which multiplexes angles, polarizations and wavelengths simultaneously. Our work paves the way to flexibly angle-dependent printing display and massively multiplexed encryption systems.
△ Less
Submitted 15 June, 2022;
originally announced June 2022.
-
Prospects for Detecting the Diffuse Supernova Neutrino Background with JUNO
Authors:
JUNO Collaboration,
Angel Abusleme,
Thomas Adam,
Shakeel Ahmad,
Rizwan Ahmed,
Sebastiano Aiello,
Muhammad Akram,
Fengpeng An,
Qi An,
Giuseppe Andronico,
Nikolay Anfimov,
Vito Antonelli,
Tatiana Antoshkina,
Burin Asavapibhop,
João Pedro Athayde Marcondes de André,
Didier Auguste,
Nikita Balashov,
Wander Baldini,
Andrea Barresi,
Davide Basilico,
Eric Baussan,
Marco Bellato,
Antonio Bergnoli,
Thilo Birkenfeld,
Sylvie Blin
, et al. (577 additional authors not shown)
Abstract:
We present the detection potential for the diffuse supernova neutrino background (DSNB) at the Jiangmen Underground Neutrino Observatory (JUNO), using the inverse-beta-decay (IBD) detection channel on free protons. We employ the latest information on the DSNB flux predictions, and investigate in detail the background and its reduction for the DSNB search at JUNO. The atmospheric neutrino induced n…
▽ More
We present the detection potential for the diffuse supernova neutrino background (DSNB) at the Jiangmen Underground Neutrino Observatory (JUNO), using the inverse-beta-decay (IBD) detection channel on free protons. We employ the latest information on the DSNB flux predictions, and investigate in detail the background and its reduction for the DSNB search at JUNO. The atmospheric neutrino induced neutral current (NC) background turns out to be the most critical background, whose uncertainty is carefully evaluated from both the spread of model predictions and an envisaged \textit{in situ} measurement. We also make a careful study on the background suppression with the pulse shape discrimination (PSD) and triple coincidence (TC) cuts. With latest DSNB signal predictions, more realistic background evaluation and PSD efficiency optimization, and additional TC cut, JUNO can reach the significance of 3$σ$ for 3 years of data taking, and achieve better than 5$σ$ after 10 years for a reference DSNB model. In the pessimistic scenario of non-observation, JUNO would strongly improve the limits and exclude a significant region of the model parameter space.
△ Less
Submitted 13 October, 2022; v1 submitted 18 May, 2022;
originally announced May 2022.
-
Mass Testing and Characterization of 20-inch PMTs for JUNO
Authors:
Angel Abusleme,
Thomas Adam,
Shakeel Ahmad,
Rizwan Ahmed,
Sebastiano Aiello,
Muhammad Akram,
Abid Aleem,
Tsagkarakis Alexandros,
Fengpeng An,
Qi An,
Giuseppe Andronico,
Nikolay Anfimov,
Vito Antonelli,
Tatiana Antoshkina,
Burin Asavapibhop,
Joao Pedro Athayde Marcondes de Andre,
Didier Auguste,
Weidong Bai,
Nikita Balashov,
Wander Baldini,
Andrea Barresi,
Davide Basilico,
Eric Baussan,
Marco Bellato,
Antonio Bergnoli
, et al. (541 additional authors not shown)
Abstract:
Main goal of the JUNO experiment is to determine the neutrino mass ordering using a 20kt liquid-scintillator detector. Its key feature is an excellent energy resolution of at least 3 % at 1 MeV, for which its instruments need to meet a certain quality and thus have to be fully characterized. More than 20,000 20-inch PMTs have been received and assessed by JUNO after a detailed testing program whic…
▽ More
Main goal of the JUNO experiment is to determine the neutrino mass ordering using a 20kt liquid-scintillator detector. Its key feature is an excellent energy resolution of at least 3 % at 1 MeV, for which its instruments need to meet a certain quality and thus have to be fully characterized. More than 20,000 20-inch PMTs have been received and assessed by JUNO after a detailed testing program which began in 2017 and elapsed for about four years. Based on this mass characterization and a set of specific requirements, a good quality of all accepted PMTs could be ascertained. This paper presents the performed testing procedure with the designed testing systems as well as the statistical characteristics of all 20-inch PMTs intended to be used in the JUNO experiment, covering more than fifteen performance parameters including the photocathode uniformity. This constitutes the largest sample of 20-inch PMTs ever produced and studied in detail to date, i.e. 15,000 of the newly developed 20-inch MCP-PMTs from Northern Night Vision Technology Co. (NNVT) and 5,000 of dynode PMTs from Hamamatsu Photonics K. K.(HPK).
△ Less
Submitted 17 September, 2022; v1 submitted 17 May, 2022;
originally announced May 2022.
-
Exploring the intrinsic energy resolution of liquid scintillator to approximately 1 MeV electrons
Authors:
Y. Deng,
X. Sun,
B. Qi,
J. Li,
W. Yan,
L. Li,
H. Jiang,
C. Wang,
X. Cai,
T. Hu,
J. Fang,
X. Fan,
F. Gu,
J. Lv,
X. Ling,
G. Qu,
X. Qi,
L. Sun,
L. Zhou,
B. Yu,
Y. Xie,
J. Ye,
Z. Zhu,
Y. Zh,
G. Zuo
Abstract:
We proposed a novel method for exploring the intrinsic energy resolution of a liquid scintillator (LAB + 2.5 g/L PPO + 3 mg/L bis-MSB) for approximately 1 MeV electrons. With the help of coincidence detection technology, single-energy electrons of Bi 207 were effectively selected. With careful measurement and analysis of the energy resolution of a small liquid scintillator detector, the intrinsic…
▽ More
We proposed a novel method for exploring the intrinsic energy resolution of a liquid scintillator (LAB + 2.5 g/L PPO + 3 mg/L bis-MSB) for approximately 1 MeV electrons. With the help of coincidence detection technology, single-energy electrons of Bi 207 were effectively selected. With careful measurement and analysis of the energy resolution of a small liquid scintillator detector, the intrinsic energy resolution to 976 keV electrons was extracted to be 1.83%. We used the wide-angle Compton coincidence (WACC) method to measure the luminescent nonlinearity of the liquid scintillator and found that it contributes only weakly to the intrinsic energy resolution of electrons. Such an unexpected large intrinsic energy resolution may come from fluctuations in energy transfer processes.
△ Less
Submitted 10 March, 2022;
originally announced March 2022.
-
Tuning of Silicon Nitride Micro Cavities by Controlled Nanolayer Deposition
Authors:
Dmitry A. Kalashnikov,
Gandhi Alagappan,
Ting Hu,
Nelson Lim,
Victor Leong,
Ching Eng Png,
Leonid A. Krivitsky
Abstract:
Integration of single-photon emitters (SPEs) with resonant photonic structures is a promising approach for realizing compact and efficient single-photon sources for quantum communications, computing, and sensing. Efficient interaction between the SPE and the photonic cavity requires that the cavity's resonance matches the SPE emission line. Here we demonstrate a new method for tuning silicon nitri…
▽ More
Integration of single-photon emitters (SPEs) with resonant photonic structures is a promising approach for realizing compact and efficient single-photon sources for quantum communications, computing, and sensing. Efficient interaction between the SPE and the photonic cavity requires that the cavity's resonance matches the SPE emission line. Here we demonstrate a new method for tuning silicon nitride (Si3N4) microring cavities via controlled deposition of the cladding layers. Guided by numerical simulations, we deposit silicon dioxide (SiO2) nanolayers onto Si3N4 ridge structures in steps of 50 nm. We show tuning of the cavity resonance over a free spectral range (FSR) without degradation of the quality-factor (Q-factor) of the cavity. We then complement this method with localized laser heating for fine-tuning of the cavity. Finally, we verify that the cladding deposition does not alter the position of nanoparticles placed on the cavity, which suggests that our method can be useful for integrating SPEs with photonic structures.
△ Less
Submitted 27 September, 2021;
originally announced September 2021.
-
Integrated scalable metalens array for optical addressing
Authors:
Tie Hu,
Yunxuan Wei,
Zhihao Zhou,
Ming Zhao,
Zhenyu Yang
Abstract:
The scalability of optical addressing is one of the key challenges for the large-scale trapped-ion quantum computing (QC). Metasurfaces is a promising solution due to excellent optical performance, integration, and miniaturization. Here, we propose and numerically demonstrate a design of integrated scalable metalens array (ISMA) working in the UV 350nm range for optical addressing. These ISMAs can…
▽ More
The scalability of optical addressing is one of the key challenges for the large-scale trapped-ion quantum computing (QC). Metasurfaces is a promising solution due to excellent optical performance, integration, and miniaturization. Here, we propose and numerically demonstrate a design of integrated scalable metalens array (ISMA) working in the UV 350nm range for optical addressing. These ISMAs can focus the collimated individual addressing beams array into diffraction-limited spots array, featuring crosstalk below 0.82%, focusing efficiency as high as 36.90%. For various applications, the x-polarized, polarization-insensitive and right-handed circularly polarized ISMA are designed. The design proposed in this paper can also find applications in optical trapping.
△ Less
Submitted 24 September, 2021;
originally announced September 2021.
-
Development of water extraction system for liquid scintillatorpurification of JUNO
Authors:
Jiaxuan Ye,
Jian Fang,
Tao hu,
Li Zhou,
Wei Hu,
Wanjin Liu,
Yayun Ding,
Mengchao Liu,
Boxiang Yu,
Xilei Sun,
Lijun Sun,
Yuguang Xie,
Xiao Cai
Abstract:
The Jiangmen Underground Neutrino Observatory (JUNO) uses 20k tons of liquid scintillator (LS)to detect neutrinos. The content of radioactive substances in the liquid scintillator will affect theexperimental results. JUNO will use counter current water extraction to reduce the radioactive metalions inside the LS. In this article, The factors that affect the final water extraction like the partitio…
▽ More
The Jiangmen Underground Neutrino Observatory (JUNO) uses 20k tons of liquid scintillator (LS)to detect neutrinos. The content of radioactive substances in the liquid scintillator will affect theexperimental results. JUNO will use counter current water extraction to reduce the radioactive metalions inside the LS. In this article, The factors that affect the final water extraction like the partitioncoefficient and the factors that affect it, the optimal mass transfer droplet size, the flow rate ratio,theoretical stage and different working mode (LS as continuous phase or dispersed phase) have beenstudied. We built counter current extraction prototype in the laboratory and a pilot plant in Daya Bay.We not only study the factors above, but also get a lot of engineering experience that worth sharing.
△ Less
Submitted 15 September, 2021;
originally announced September 2021.
-
Radioactivity control strategy for the JUNO detector
Authors:
JUNO collaboration,
Angel Abusleme,
Thomas Adam,
Shakeel Ahmad,
Rizwan Ahmed,
Sebastiano Aiello,
Muhammad Akram,
Fengpeng An,
Qi An,
Giuseppe Andronico,
Nikolay Anfimov,
Vito Antonelli,
Tatiana Antoshkina,
Burin Asavapibhop,
João Pedro Athayde Marcondes de André,
Didier Auguste,
Andrej Babic,
Wander Baldini,
Andrea Barresi,
Davide Basilico,
Eric Baussan,
Marco Bellato,
Antonio Bergnoli,
Thilo Birkenfeld,
Sylvie Blin
, et al. (578 additional authors not shown)
Abstract:
JUNO is a massive liquid scintillator detector with a primary scientific goal of determining the neutrino mass ordering by studying the oscillated anti-neutrino flux coming from two nuclear power plants at 53 km distance. The expected signal anti-neutrino interaction rate is only 60 counts per day, therefore a careful control of the background sources due to radioactivity is critical. In particula…
▽ More
JUNO is a massive liquid scintillator detector with a primary scientific goal of determining the neutrino mass ordering by studying the oscillated anti-neutrino flux coming from two nuclear power plants at 53 km distance. The expected signal anti-neutrino interaction rate is only 60 counts per day, therefore a careful control of the background sources due to radioactivity is critical. In particular, natural radioactivity present in all materials and in the environment represents a serious issue that could impair the sensitivity of the experiment if appropriate countermeasures were not foreseen. In this paper we discuss the background reduction strategies undertaken by the JUNO collaboration to reduce at minimum the impact of natural radioactivity. We describe our efforts for an optimized experimental design, a careful material screening and accurate detector production handling, and a constant control of the expected results through a meticulous Monte Carlo simulation program. We show that all these actions should allow us to keep the background count rate safely below the target value of 10 Hz in the default fiducial volume, above an energy threshold of 0.7 MeV.
△ Less
Submitted 13 October, 2021; v1 submitted 8 July, 2021;
originally announced July 2021.
-
The Design and Sensitivity of JUNO's scintillator radiopurity pre-detector OSIRIS
Authors:
JUNO Collaboration,
Angel Abusleme,
Thomas Adam,
Shakeel Ahmad,
Rizwan Ahmed,
Sebastiano Aiello,
Muhammad Akram,
Fengpeng An,
Guangpeng An,
Qi An,
Giuseppe Andronico,
Nikolay Anfimov,
Vito Antonelli,
Tatiana Antoshkina,
Burin Asavapibhop,
João Pedro Athayde Marcondes de André,
Didier Auguste,
Andrej Babic,
Wander Baldini,
Andrea Barresi,
Davide Basilico,
Eric Baussan,
Marco Bellato,
Antonio Bergnoli,
Thilo Birkenfeld
, et al. (582 additional authors not shown)
Abstract:
The OSIRIS detector is a subsystem of the liquid scintillator fillling chain of the JUNO reactor neutrino experiment. Its purpose is to validate the radiopurity of the scintillator to assure that all components of the JUNO scintillator system work to specifications and only neutrino-grade scintillator is filled into the JUNO Central Detector. The aspired sensitivity level of $10^{-16}$ g/g of…
▽ More
The OSIRIS detector is a subsystem of the liquid scintillator fillling chain of the JUNO reactor neutrino experiment. Its purpose is to validate the radiopurity of the scintillator to assure that all components of the JUNO scintillator system work to specifications and only neutrino-grade scintillator is filled into the JUNO Central Detector. The aspired sensitivity level of $10^{-16}$ g/g of $^{238}$U and $^{232}$Th requires a large ($\sim$20 m$^3$) detection volume and ultralow background levels. The present paper reports on the design and major components of the OSIRIS detector, the detector simulation as well as the measuring strategies foreseen and the sensitivity levels to U/Th that can be reached in this setup.
△ Less
Submitted 31 March, 2021;
originally announced March 2021.
-
Spatiotemporal Characteristics and Factor Analysis of SARS-CoV-2 Infections among Healthcare Workers in Wuhan, China
Authors:
Peixiao Wang,
Hui Ren,
Xinyan Zhu,
Xiaokang Fu,
Hongqiang Liu,
Tao Hu
Abstract:
Studying the spatiotemporal distribution of SARS-CoV-2 infections among healthcare workers (HCWs) can aid in protecting them from exposure. Existing studies related to HCW infections have emphasized infection rates and protective measures. However, the spatiotemporal patterns and related external environmental factors of HCW infections remain unclear. To fill this gap, an open-source dataset of HC…
▽ More
Studying the spatiotemporal distribution of SARS-CoV-2 infections among healthcare workers (HCWs) can aid in protecting them from exposure. Existing studies related to HCW infections have emphasized infection rates and protective measures. However, the spatiotemporal patterns and related external environmental factors of HCW infections remain unclear. To fill this gap, an open-source dataset of HCW diagnoses was provided, and the spatiotemporal distributions of SARS-CoV-2 infections among HCWs in Wuhan, China were explored. A geographical detector technique was then used to investigate the impacts of hospital level, type, distance from the infection source, and other external indicators of HCW infections. The results showed that the number of daily HCW infections over time in Wuhan followed a log-normal distribution, with and its mean observed on January 23, 2020 and a standard deviation of 10.8 days. The implementation of high-impact measures, such as the lockdown of the city, may have increased the probability of HCW infections in the short term, especially for HCWs in the outer ring of Wuhan. The infection of HCWs Wuhan exhibited clear spatial heterogeneity. The number of HCW infections was higher in the central city and lower in the outer city. Moreover, HCW infections displayed significant spatial autocorrelation and dependence. Factors analyses revealed that hospital level and type had an even greater impact on HCW infections; third-class and general hospitals closer to infection sources were correlated with especially high risks of infection. These findings can aid national epidemic prevention and control departments to understand the spatiotemporal distributions of viral transmission resulting in HCW infections, as well as external influencing factors, which can facilitate the protection of HCWs in China.
△ Less
Submitted 30 January, 2021; v1 submitted 16 December, 2020;
originally announced December 2020.
-
Spatiotemporal Differences of COVID-19 Infection among Healthcare Workers and Patients in China from January to March 2020
Authors:
Peixiao Wang,
Xinyan Zhu,
Wei Guo,
Hui Ren,
Tao Hu
Abstract:
Studying the spatiotemporal differences in coronavirus disease (COVID-19) between social groups such as healthcare workers (HCWs) and patients can aid in formulating epidemic containment policies. Most previous studies of the spatiotemporal characteristics of COVID-19 were conducted in a single group and did not explore the differences between groups. To fill this research gap, this study assessed…
▽ More
Studying the spatiotemporal differences in coronavirus disease (COVID-19) between social groups such as healthcare workers (HCWs) and patients can aid in formulating epidemic containment policies. Most previous studies of the spatiotemporal characteristics of COVID-19 were conducted in a single group and did not explore the differences between groups. To fill this research gap, this study assessed the spatiotemporal characteristics and differences among patients and HCWs infection in Wuhan, Hubei (excluding Wuhan), and China (excluding Hubei). The temporal difference was greater in Wuhan than in the rest of Hubei, and was greater in Hubei (excluding Wuhan) than in the rest of China. The incidence was high in healthcare workers in the early stages of the epidemic. Therefore, it is important to strengthen the protective measures for healthcare workers in the early stage of the epidemic. The spatial difference was less in Wuhan than in the rest of Hubei, and less in Hubei (excluding Wuhan) than in the rest of China. The spatial distribution of healthcare worker infections can be used to infer the spatial distribution of the epidemic in the early stage and to formulate control measures accordingly.
△ Less
Submitted 27 January, 2021; v1 submitted 11 November, 2020;
originally announced November 2020.
-
Calibration Strategy of the JUNO Experiment
Authors:
JUNO collaboration,
Angel Abusleme,
Thomas Adam,
Shakeel Ahmad,
Rizwan Ahmed,
Sebastiano Aiello,
Muhammad Akram,
Fengpeng An,
Guangpeng An,
Qi An,
Giuseppe Andronico,
Nikolay Anfimov,
Vito Antonelli,
Tatiana Antoshkina,
Burin Asavapibhop,
João Pedro Athayde Marcondes de André,
Didier Auguste,
Andrej Babic,
Wander Baldini,
Andrea Barresi,
Eric Baussan,
Marco Bellato,
Antonio Bergnoli,
Enrico Bernieri,
Thilo Birkenfeld
, et al. (571 additional authors not shown)
Abstract:
We present the calibration strategy for the 20 kton liquid scintillator central detector of the Jiangmen Underground Neutrino Observatory (JUNO). By utilizing a comprehensive multiple-source and multiple-positional calibration program, in combination with a novel dual calorimetry technique exploiting two independent photosensors and readout systems, we demonstrate that the JUNO central detector ca…
▽ More
We present the calibration strategy for the 20 kton liquid scintillator central detector of the Jiangmen Underground Neutrino Observatory (JUNO). By utilizing a comprehensive multiple-source and multiple-positional calibration program, in combination with a novel dual calorimetry technique exploiting two independent photosensors and readout systems, we demonstrate that the JUNO central detector can achieve a better than 1% energy linearity and a 3% effective energy resolution, required by the neutrino mass ordering determination.
△ Less
Submitted 20 January, 2021; v1 submitted 12 November, 2020;
originally announced November 2020.
-
The replacement system of the JUNO liquid scintillator pilot experiment at Daya Bay
Authors:
Wenqi Yan,
Tao Hu,
Li Zhou,
Jun Cao,
Xiao Cai,
Jian Fang,
Lijun Sun,
Boxiang Yu,
Xilei Sun,
Zeyuan Yu,
Yayun Ding,
Mengchao Liu,
Xiaoyan Ma,
Xiaohui Qian,
Wanjin Liu,
Yuguang Xie
Abstract:
The Jiangmen Underground Neutrino Observatory (JUNO), a multi-purpose neutrino experiment, will use 20 kt liquid scintillator (LS). To achieve the physics goal of determining the neutrino mass ordering, 3$\%$ energy resolution at 1 MeV is required. This puts strict requirements on the LS light yield and the transparency. Four LS purification steps have been designed and mid-scale plants have been…
▽ More
The Jiangmen Underground Neutrino Observatory (JUNO), a multi-purpose neutrino experiment, will use 20 kt liquid scintillator (LS). To achieve the physics goal of determining the neutrino mass ordering, 3$\%$ energy resolution at 1 MeV is required. This puts strict requirements on the LS light yield and the transparency. Four LS purification steps have been designed and mid-scale plants have been built at Daya Bay. To examine the performance of the purified LS and find the optimized LS composition, the purified LS was injected to the antineutrino detector 1 in the experimental hall 1 (EH1-AD1) of the Daya Bay neutrino experiment. To pump out the original gadolinium loaded LS and fill the new LS, a LS replacement system has been built in EH1 in 2017. By replacing the Gd-LS with purified water, then replacing the water with purified LS, the replacement system successfully achieved the designed goal. Subsequently, the fluorescence and the wavelength shifter were added to higher concentrations via the replacement system. The data taken at various LS compositions helped JUNO determine the final LS cocktail. Details of the design, the construction, and the operation of the replacement system are reported in this paper.
△ Less
Submitted 12 November, 2020; v1 submitted 11 November, 2020;
originally announced November 2020.
-
Tunable Magnetism and Insulator-Metal Transition in Bilayer Perovskites
Authors:
Shaowen Xu,
Fanhao Jia,
Guodong Zhao,
Tao Hu,
Shunbo Hu,
Wei Ren
Abstract:
Two-dimensional (2D) transition-metal oxide perovskites greatly expand the field of available 2D multifunctional material systems. Here, based on density functional theory calculations, we predicted the presence of ferromagnetism orders accompanying with an insulator-metal phase transition in bilayer $KNbO_{3}$ and $KTaO_{3}$ by applying strain engineering and/or external electric field. Our resul…
▽ More
Two-dimensional (2D) transition-metal oxide perovskites greatly expand the field of available 2D multifunctional material systems. Here, based on density functional theory calculations, we predicted the presence of ferromagnetism orders accompanying with an insulator-metal phase transition in bilayer $KNbO_{3}$ and $KTaO_{3}$ by applying strain engineering and/or external electric field. Our results will contribute to the applications of few-layer transition metal oxide perovskites in the emerging spintronics and straintronics.
△ Less
Submitted 9 October, 2020;
originally announced October 2020.
-
Integrated Avalanche Photodetectors for Visible Light
Authors:
Salih Yanikgonul,
Victor Leong,
Jun Rong Ong,
Ting Hu,
Ching Eng Png,
Leonid Krivitsky
Abstract:
Integrated photodetectors are essential components of scalable photonics platforms for quantum and classical applications. However, most efforts in the development of such devices to date have been focused on infrared telecommunications wavelengths. Here, we report the first monolithically integrated avalanche photodetector (APD) for visible light. Our devices are based on a doped silicon rib wave…
▽ More
Integrated photodetectors are essential components of scalable photonics platforms for quantum and classical applications. However, most efforts in the development of such devices to date have been focused on infrared telecommunications wavelengths. Here, we report the first monolithically integrated avalanche photodetector (APD) for visible light. Our devices are based on a doped silicon rib waveguide with a novel end-fire input coupling to a silicon nitride waveguide. We demonstrate a high gain-bandwidth product of 216 $\pm$ 12 GHz at 20 V reverse bias measured for 685 nm input light, with a low dark current of 0.12 $μ$A . This performance is very competitive when benchmarked against other integrated APDs operating in the infrared range. With CMOS-compatible fabrication and integrability with silicon nitride platforms, our devices are attractive for visible-light photonics applications in sensing and communications.
△ Less
Submitted 3 September, 2020;
originally announced September 2020.
-
Optimization of the JUNO liquid scintillator composition using a Daya Bay antineutrino detector
Authors:
Daya Bay,
JUNO collaborations,
:,
A. Abusleme,
T. Adam,
S. Ahmad,
S. Aiello,
M. Akram,
N. Ali,
F. P. An,
G. P. An,
Q. An,
G. Andronico,
N. Anfimov,
V. Antonelli,
T. Antoshkina,
B. Asavapibhop,
J. P. A. M. de André,
A. Babic,
A. B. Balantekin,
W. Baldini,
M. Baldoncini,
H. R. Band,
A. Barresi,
E. Baussan
, et al. (642 additional authors not shown)
Abstract:
To maximize the light yield of the liquid scintillator (LS) for the Jiangmen Underground Neutrino Observatory (JUNO), a 20 t LS sample was produced in a pilot plant at Daya Bay. The optical properties of the new LS in various compositions were studied by replacing the gadolinium-loaded LS in one antineutrino detector. The concentrations of the fluor, PPO, and the wavelength shifter, bis-MSB, were…
▽ More
To maximize the light yield of the liquid scintillator (LS) for the Jiangmen Underground Neutrino Observatory (JUNO), a 20 t LS sample was produced in a pilot plant at Daya Bay. The optical properties of the new LS in various compositions were studied by replacing the gadolinium-loaded LS in one antineutrino detector. The concentrations of the fluor, PPO, and the wavelength shifter, bis-MSB, were increased in 12 steps from 0.5 g/L and <0.01 mg/L to 4 g/L and 13 mg/L, respectively. The numbers of total detected photoelectrons suggest that, with the optically purified solvent, the bis-MSB concentration does not need to be more than 4 mg/L. To bridge the one order of magnitude in the detector size difference between Daya Bay and JUNO, the Daya Bay data were used to tune the parameters of a newly developed optical model. Then, the model and tuned parameters were used in the JUNO simulation. This enabled to determine the optimal composition for the JUNO LS: purified solvent LAB with 2.5 g/L PPO, and 1 to 4 mg/L bis-MSB.
△ Less
Submitted 1 July, 2020;
originally announced July 2020.
-
Search For Electron-Antineutrinos Associated With Gravitational-Wave Events GW150914, GW151012, GW151226, GW170104, GW170608, GW170814, and GW170817 at Daya Bay
Authors:
F. P. An,
A. B. Balantekin,
H. R. Band,
M. Bishai,
S. Blyth,
G. F. Cao,
J. Cao,
J. F. Chang,
Y. Chang,
H. S. Chen,
S. M. Chen,
Y. Chen,
Y. X. Chen,
J. Cheng,
Z. K. Cheng,
J. J. Cherwinka,
M. C. Chu,
J. P. Cummings,
O. Dalager,
F. S. Deng,
Y. Y. Ding,
M. V. Diwan,
T. Dohnal,
J. Dove,
M. Dvorak
, et al. (161 additional authors not shown)
Abstract:
Providing a possible connection between neutrino emission and gravitational-wave (GW) bursts is important to our understanding of the physical processes that occur when black holes or neutron stars merge. In the Daya Bay experiment, using data collected from December 2011 to August 2017, a search has been performed for electron-antineutrino signals coinciding with detected GW events, including GW1…
▽ More
Providing a possible connection between neutrino emission and gravitational-wave (GW) bursts is important to our understanding of the physical processes that occur when black holes or neutron stars merge. In the Daya Bay experiment, using data collected from December 2011 to August 2017, a search has been performed for electron-antineutrino signals coinciding with detected GW events, including GW150914, GW151012, GW151226, GW170104, GW170608, GW170814, and GW170817. We used three time windows of $\mathrm{\pm 10~s}$, $\mathrm{\pm 500~s}$, and $\mathrm{\pm 1000~s}$ relative to the occurrence of the GW events, and a neutrino energy range of 1.8 to 100 MeV to search for correlated neutrino candidates. The detected electron-antineutrino candidates are consistent with the expected background rates for all the three time windows. Assuming monochromatic spectra, we found upper limits (90% confidence level) on electron-antineutrino fluence of $(1.13~-~2.44) \times 10^{11}~\rm{cm^{-2}}$ at 5 MeV to $8.0 \times 10^{7}~\rm{cm^{-2}}$ at 100 MeV for the three time windows. Under the assumption of a Fermi-Dirac spectrum, the upper limits were found to be $(5.4~-~7.0)\times 10^{9}~\rm{cm^{-2}}$ for the three time windows.
△ Less
Submitted 14 September, 2020; v1 submitted 27 June, 2020;
originally announced June 2020.
-
Feasibility and physics potential of detecting $^8$B solar neutrinos at JUNO
Authors:
JUNO collaboration,
Angel Abusleme,
Thomas Adam,
Shakeel Ahmad,
Sebastiano Aiello,
Muhammad Akram,
Nawab Ali,
Fengpeng An,
Guangpeng An,
Qi An,
Giuseppe Andronico,
Nikolay Anfimov,
Vito Antonelli,
Tatiana Antoshkina,
Burin Asavapibhop,
João Pedro Athayde Marcondes de André,
Didier Auguste,
Andrej Babic,
Wander Baldini,
Andrea Barresi,
Eric Baussan,
Marco Bellato,
Antonio Bergnoli,
Enrico Bernieri,
David Biare
, et al. (572 additional authors not shown)
Abstract:
The Jiangmen Underground Neutrino Observatory~(JUNO) features a 20~kt multi-purpose underground liquid scintillator sphere as its main detector. Some of JUNO's features make it an excellent experiment for $^8$B solar neutrino measurements, such as its low-energy threshold, its high energy resolution compared to water Cherenkov detectors, and its much large target mass compared to previous liquid s…
▽ More
The Jiangmen Underground Neutrino Observatory~(JUNO) features a 20~kt multi-purpose underground liquid scintillator sphere as its main detector. Some of JUNO's features make it an excellent experiment for $^8$B solar neutrino measurements, such as its low-energy threshold, its high energy resolution compared to water Cherenkov detectors, and its much large target mass compared to previous liquid scintillator detectors. In this paper we present a comprehensive assessment of JUNO's potential for detecting $^8$B solar neutrinos via the neutrino-electron elastic scattering process. A reduced 2~MeV threshold on the recoil electron energy is found to be achievable assuming the intrinsic radioactive background $^{238}$U and $^{232}$Th in the liquid scintillator can be controlled to 10$^{-17}$~g/g. With ten years of data taking, about 60,000 signal and 30,000 background events are expected. This large sample will enable an examination of the distortion of the recoil electron spectrum that is dominated by the neutrino flavor transformation in the dense solar matter, which will shed new light on the tension between the measured electron spectra and the predictions of the standard three-flavor neutrino oscillation framework. If $Δm^{2}_{21}=4.8\times10^{-5}~(7.5\times10^{-5})$~eV$^{2}$, JUNO can provide evidence of neutrino oscillation in the Earth at the about 3$σ$~(2$σ$) level by measuring the non-zero signal rate variation with respect to the solar zenith angle. Moveover, JUNO can simultaneously measure $Δm^2_{21}$ using $^8$B solar neutrinos to a precision of 20\% or better depending on the central value and to sub-percent precision using reactor antineutrinos. A comparison of these two measurements from the same detector will help elucidate the current tension between the value of $Δm^2_{21}$ reported by solar neutrino experiments and the KamLAND experiment.
△ Less
Submitted 21 June, 2020;
originally announced June 2020.
-
TAO Conceptual Design Report: A Precision Measurement of the Reactor Antineutrino Spectrum with Sub-percent Energy Resolution
Authors:
JUNO Collaboration,
Angel Abusleme,
Thomas Adam,
Shakeel Ahmad,
Sebastiano Aiello,
Muhammad Akram,
Nawab Ali,
Fengpeng An,
Guangpeng An,
Qi An,
Giuseppe Andronico,
Nikolay Anfimov,
Vito Antonelli,
Tatiana Antoshkina,
Burin Asavapibhop,
João Pedro Athayde Marcondes de André,
Didier Auguste,
Andrej Babic,
Wander Baldini,
Andrea Barresi,
Eric Baussan,
Marco Bellato,
Antonio Bergnoli,
Enrico Bernieri,
David Biare
, et al. (568 additional authors not shown)
Abstract:
The Taishan Antineutrino Observatory (TAO, also known as JUNO-TAO) is a satellite experiment of the Jiangmen Underground Neutrino Observatory (JUNO). A ton-level liquid scintillator detector will be placed at about 30 m from a core of the Taishan Nuclear Power Plant. The reactor antineutrino spectrum will be measured with sub-percent energy resolution, to provide a reference spectrum for future re…
▽ More
The Taishan Antineutrino Observatory (TAO, also known as JUNO-TAO) is a satellite experiment of the Jiangmen Underground Neutrino Observatory (JUNO). A ton-level liquid scintillator detector will be placed at about 30 m from a core of the Taishan Nuclear Power Plant. The reactor antineutrino spectrum will be measured with sub-percent energy resolution, to provide a reference spectrum for future reactor neutrino experiments, and to provide a benchmark measurement to test nuclear databases. A spherical acrylic vessel containing 2.8 ton gadolinium-doped liquid scintillator will be viewed by 10 m^2 Silicon Photomultipliers (SiPMs) of >50% photon detection efficiency with almost full coverage. The photoelectron yield is about 4500 per MeV, an order higher than any existing large-scale liquid scintillator detectors. The detector operates at -50 degree C to lower the dark noise of SiPMs to an acceptable level. The detector will measure about 2000 reactor antineutrinos per day, and is designed to be well shielded from cosmogenic backgrounds and ambient radioactivities to have about 10% background-to-signal ratio. The experiment is expected to start operation in 2022.
△ Less
Submitted 18 May, 2020;
originally announced May 2020.
-
Taking the pulse of COVID-19: A spatiotemporal perspective
Authors:
Chaowei Yang,
Dexuan Sha,
Qian Liu,
Yun Li,
Hai Lan,
Weihe Wendy Guan,
Tao Hu,
Zhenlong Li,
Zhiran Zhang,
John Hoot Thompson,
Zifu Wang,
David Wong,
Shiyang Ruan,
Manzhu Yu,
Douglas Richardson,
Luyao Zhang,
Ruizhi Hou,
You Zhou,
Cheng Zhong,
Yifei Tian,
Fayez Beaini,
Kyla Carte,
Colin Flynn,
Wei Liu,
Dieter Pfoser
, et al. (10 additional authors not shown)
Abstract:
The sudden outbreak of the Coronavirus disease (COVID-19) swept across the world in early 2020, triggering the lockdowns of several billion people across many countries, including China, Spain, India, the U.K., Italy, France, Germany, and most states of the U.S. The transmission of the virus accelerated rapidly with the most confirmed cases in the U.S., and New York City became an epicenter of the…
▽ More
The sudden outbreak of the Coronavirus disease (COVID-19) swept across the world in early 2020, triggering the lockdowns of several billion people across many countries, including China, Spain, India, the U.K., Italy, France, Germany, and most states of the U.S. The transmission of the virus accelerated rapidly with the most confirmed cases in the U.S., and New York City became an epicenter of the pandemic by the end of March. In response to this national and global emergency, the NSF Spatiotemporal Innovation Center brought together a taskforce of international researchers and assembled implemented strategies to rapidly respond to this crisis, for supporting research, saving lives, and protecting the health of global citizens. This perspective paper presents our collective view on the global health emergency and our effort in collecting, analyzing, and sharing relevant data on global policy and government responses, geospatial indicators of the outbreak and evolving forecasts; in developing research capabilities and mitigation measures with global scientists, promoting collaborative research on outbreak dynamics, and reflecting on the dynamic responses from human societies.
△ Less
Submitted 8 May, 2020;
originally announced May 2020.
-
Spatiotemporal Patterns of COVID-19 Impact on Human Activities and Environment in China Using Nighttime Light and Air Quality Data
Authors:
Qian Liu,
Dexuan Sha,
Wei Liu,
Paul Houser,
Luyao Zhang,
Ruizhi Hou,
Hai Lan,
Colin Flynn,
Mingyue Lu,
Tao Hu,
Chaowei Yang
Abstract:
In order to analyze the impact of COVID-19 on people's lives, activities and the natural environment, this paper investigates the spatial and temporal characteristics of Night Time Light (NTL) radiance and Air Quality Index (AQI) before and during the pandemic in mainland China. Our results show that the monthly average NTL brightness is much lower during the quarantine period than before. This st…
▽ More
In order to analyze the impact of COVID-19 on people's lives, activities and the natural environment, this paper investigates the spatial and temporal characteristics of Night Time Light (NTL) radiance and Air Quality Index (AQI) before and during the pandemic in mainland China. Our results show that the monthly average NTL brightness is much lower during the quarantine period than before. This study categorizes NTL into three classes: residential area, transportation and public facilities and commercial centers, with NTL radiance ranges of 5-20, 20-40 and greater than 40 nW/(cm*cm*sr), respectively. We found that the Number Of Pixels (NOP) with NTL detection increased in the residential area and decreased in the commercial centers for most of the provinces after the shutdown, while transportation and public facilities generally stayed the same. More specifically, we examined these factors in Wuhan, where the first confirmed cases were reported, and where the earliest quarantine measures were taken. Observations and analysis of pixels associated with commercial centers were observed to have lower NTL radiance values, indicating a dimming behavior, while residential area pixels recorded increased levels of brightness, after the beginning of the lockdown. The study also discovered a significant decreasing trend in the daily average AQI for the whole country, with cleaner air in most provinces during February and March, compared to January 2020. In conclusion, the outbreak and spread of COVID-19 has had a crucial impact on people's daily lives and activity ranges through the increased implementation of lockdown and quarantine policies. On the other hand, the air quality of China has improved with the reduction of non-essential industries and motor vehicle usage.
△ Less
Submitted 3 May, 2020;
originally announced May 2020.
-
Compact optical polarization-insensitive zoom metalens-doublet
Authors:
Yunxuan Wei,
Yuxi Wang,
Xing Feng,
Shunyuan Xiao,
Zhaokun Wang,
Tie Hu,
Manchen Hu,
Martin Wegener,
Ming Zhao,
Jinsong Xia,
Zhenyu Yang
Abstract:
Metasurface-based lenses (metalenses) offer specific conceptual advantages compared to ordinary refractive lenses. For example, it is possible to tune the focal length of a metalens doublet by varying the relative angle between the two metalenses while fixing their distance, leading to an extremely compact zoom lens. An improved polarization-insensitive design based on silicon-nanocylinders on sil…
▽ More
Metasurface-based lenses (metalenses) offer specific conceptual advantages compared to ordinary refractive lenses. For example, it is possible to tune the focal length of a metalens doublet by varying the relative angle between the two metalenses while fixing their distance, leading to an extremely compact zoom lens. An improved polarization-insensitive design based on silicon-nanocylinders on silica substrates is presented. This design is realized and characterized experimentally at 1550 nm wavelength. By varying the relative angle between the metalenses in steps of 10 degrees, tuning of the doublet focal length is demonstrated from -54 mm to -+3 mm to +54 mm. This results in a zoom factor of an imaging system varying between 1 and 18. For positive focal lengths, the doublet focusing efficiency has a minimum of 34% and a maximum of 83%. Experiment and theory are in very good agreement.
△ Less
Submitted 29 January, 2020; v1 submitted 16 January, 2020;
originally announced January 2020.
-
On the risks of using double precision in numerical simulations of spatio-temporal chaos
Authors:
Tianli Hu,
Shijun Liao
Abstract:
Due to the butterfly-effect, computer-generated chaotic simulations often deviate exponentially from the true solution, so that it is very hard to obtain a reliable simulation of chaos in a long-duration time. In this paper, a new strategy of the so-called Clean Numerical Simulation (CNS) in physical space is proposed for spatio-temporal chaos, which is computationally much more efficient than its…
▽ More
Due to the butterfly-effect, computer-generated chaotic simulations often deviate exponentially from the true solution, so that it is very hard to obtain a reliable simulation of chaos in a long-duration time. In this paper, a new strategy of the so-called Clean Numerical Simulation (CNS) in physical space is proposed for spatio-temporal chaos, which is computationally much more efficient than its predecessor (in spectral space). The strategy of the CNS is to reduce both of the truncation and round-off errors to a specified level by implementing high-order algorithms in multiple-precision arithmetic (with sufficient significant digits for all variables and parameters) so as to guarantee that numerical noise is below such a critical level in a temporal interval $t\in[0,T_c]$ that corresponding numerical simulation remains reliable over the whole interval. Without loss of generality, the complex Ginzburg-Landau equation (CGLE) is used to illustrate its validity. As a result, a reliable long-duration numerical simulation of the CGLE is achieved in the whole spatial domain over a long interval of time $t\in[0,3000]$, which is used as a reliable benchmark solution to investigate the influence of numerical noise by comparing it with the corresponding ones given by the 4th-order Runge-Kutta method in double precision (RKwD). Our results demonstrate that the use of double precision in simulations of chaos might lead to huge errors in the prediction of spatio-temporal trajectories and in statistics, not only quantitatively but also qualitatively, particularly in a long interval of time.
△ Less
Submitted 3 June, 2020; v1 submitted 25 October, 2019;
originally announced October 2019.
-
Demonstration of a-Si metalenses on a 12-inch glass wafer by CMOS-compatible technology
Authors:
Ting Hu,
Qize Zhong,
Nanxi Li,
Yuan Dong,
Yuan Hsing Fu,
Zhengji Xu,
Dongdong Li,
Vladimir Bliznetsov,
Keng Heng Lai,
Shiyang Zhu,
Qunying Lin,
Yuandong Gu,
Navab Singh,
Dim-Lee Kwong
Abstract:
Metalenses built up by artificial sub-wavelength nanostructures have shown the capability of realizing light focusing with miniature lens size. To date, most of the reported metalenses were patterned using electron beam lithography (EBL), which requires long processing time and is not suitable for mass production. Here, we demonstrate an amorphous silicon (a-Si) metalens on a 12-inch glass wafer v…
▽ More
Metalenses built up by artificial sub-wavelength nanostructures have shown the capability of realizing light focusing with miniature lens size. To date, most of the reported metalenses were patterned using electron beam lithography (EBL), which requires long processing time and is not suitable for mass production. Here, we demonstrate an amorphous silicon (a-Si) metalens on a 12-inch glass wafer via the 193 nm ArF deep UV immersion lithography, with critical dimension (CD) as small as 100 nm. The layer transfer technology is developed to solve the glass wafer handling issue in complementary metal-oxide-semiconductor (CMOS) fabrication line. The measured numerical aperture (NA) is 0.494 with a beam spot size of 1.26 μm, which agrees well with the simulation results. The focusing efficiency of 29.2% is observed at the designed wavelength of 940 nm. In addition, the metalens is applied in an imaging system, which further verifies its focusing functionality.
△ Less
Submitted 11 June, 2019;
originally announced June 2019.
-
Extraction of the $^{235}$U and $^{239}$Pu Antineutrino Spectra at Daya Bay
Authors:
Daya Bay collaboration,
D. Adey,
F. P. An,
A. B. Balantekin,
H. R. Band,
M. Bishai,
S. Blyth,
D. Cao,
G. F. Cao,
J. Cao,
J. F. Chang,
Y. Chang,
H. S. Chen,
S. M. Chen,
Y. Chen,
Y. X. Chen,
J. Cheng,
Z. K. Cheng,
J. J. Cherwinka,
M. C. Chu,
A. Chukanov,
J. P. Cummings,
N. Dash,
F. S. Deng,
Y. Y. Ding
, et al. (171 additional authors not shown)
Abstract:
This Letter reports the first extraction of individual antineutrino spectra from $^{235}$U and $^{239}$Pu fission and an improved measurement of the prompt energy spectrum of reactor antineutrinos at Daya Bay. The analysis uses $3.5\times 10^6$ inverse beta-decay candidates in four near antineutrino detectors in 1958 days. The individual antineutrino spectra of the two dominant isotopes, $^{235}$U…
▽ More
This Letter reports the first extraction of individual antineutrino spectra from $^{235}$U and $^{239}$Pu fission and an improved measurement of the prompt energy spectrum of reactor antineutrinos at Daya Bay. The analysis uses $3.5\times 10^6$ inverse beta-decay candidates in four near antineutrino detectors in 1958 days. The individual antineutrino spectra of the two dominant isotopes, $^{235}$U and $^{239}$Pu, are extracted using the evolution of the prompt spectrum as a function of the isotope fission fractions. In the energy window of 4--6~MeV, a 7\% (9\%) excess of events is observed for the $^{235}$U ($^{239}$Pu) spectrum compared with the normalized Huber-Mueller model prediction. The significance of discrepancy is $4.0σ$ for $^{235}$U spectral shape compared with the Huber-Mueller model prediction. The shape of the measured inverse beta-decay prompt energy spectrum disagrees with the prediction of the Huber-Mueller model at $5.3σ$. In the energy range of 4--6~MeV, a maximal local discrepancy of $6.3σ$ is observed.
△ Less
Submitted 16 September, 2019; v1 submitted 16 April, 2019;
originally announced April 2019.
-
An Exciton-Polariton Fano Resonance Driven by Second Harmonic Generation
Authors:
Yafeng Wang,
Liming Liao,
Tao Hu,
Song Luo,
Lin Wu,
Jun Wang,
Zhe Zhang,
Wei Xie,
Liaoxin Sun,
A. V. Kavokin,
Xuechu Shen,
Zhanghai Chen
Abstract:
Angle-resolved second harmonic generation (SHG) spectra of ZnO microwires show characteristic Fano resonances in the spectral vicinity of exciton-polariton modes. The output SHG spectra after SHG interacting with exciton polariton shows a resonant enhancement peak accompanied by a suppression dip originating from the constructive and destructive interference respectively. It is demonstrated that t…
▽ More
Angle-resolved second harmonic generation (SHG) spectra of ZnO microwires show characteristic Fano resonances in the spectral vicinity of exciton-polariton modes. The output SHG spectra after SHG interacting with exciton polariton shows a resonant enhancement peak accompanied by a suppression dip originating from the constructive and destructive interference respectively. It is demonstrated that the Fano line shape, and thus the Fano asymmetry parameter q, can be tuned by the phase-shift of the two channels. The phase-dependent q was calculated and the model describes our experimental results well. In particular, the phase-to-q relation unveil the crucial information about the dynamics of the system, e.g., defining the line shape of output SHG spectra in a superposition of quantum states.
△ Less
Submitted 5 March, 2019;
originally announced March 2019.
-
A high precision calibration of the nonlinear energy response at Daya Bay
Authors:
Daya Bay collaboration,
D. Adey,
F. P. An,
A. B. Balantekin,
H. R. Band,
M. Bishai,
S. Blyth,
D. Cao,
G. F. Cao,
J. Cao,
J. F. Chang,
Y. Chang,
H. S. Chen,
S. M. Chen,
Y. Chen,
Y. X. Chen,
J. Cheng,
Z. K. Cheng,
J. J. Cherwinka,
M. C. Chu,
A. Chukanov,
J. P. Cummings,
N. Dash,
F. S. Deng,
Y. Y. Ding
, et al. (173 additional authors not shown)
Abstract:
A high precision calibration of the nonlinearity in the energy response of the Daya Bay Reactor Neutrino Experiment's antineutrino detectors is presented in detail. The energy nonlinearity originates from the particle-dependent light yield of the scintillator and charge-dependent electronics response. The nonlinearity model is constrained by $γ$ calibration points from deployed and naturally occur…
▽ More
A high precision calibration of the nonlinearity in the energy response of the Daya Bay Reactor Neutrino Experiment's antineutrino detectors is presented in detail. The energy nonlinearity originates from the particle-dependent light yield of the scintillator and charge-dependent electronics response. The nonlinearity model is constrained by $γ$ calibration points from deployed and naturally occurring radioactive sources, the $β$ spectrum from $^{12}$B decays, and a direct measurement of the electronics nonlinearity with a new flash analog-to-digital converter readout system. Less than 0.5% uncertainty in the energy nonlinearity calibration is achieved for positrons of kinetic energies greater than 1 MeV.
△ Less
Submitted 27 June, 2019; v1 submitted 21 February, 2019;
originally announced February 2019.
-
A phase-field formulation for dynamic cohesive fracture
Authors:
Rudy J. M. Geelen,
Yingjie Liu,
Tianchen Hu,
Michael R. Tupek,
John E. Dolbow
Abstract:
We extend a phase-field/gradient damage formulation for cohesive fracture to the dynamic case. The model is characterized by a regularized fracture energy that is linear in the damage field, as well as non-polynomial degradation functions. Two categories of degradation functions are examined, and a process to derive a given degradation function based on a local stress-strain response in the cohesi…
▽ More
We extend a phase-field/gradient damage formulation for cohesive fracture to the dynamic case. The model is characterized by a regularized fracture energy that is linear in the damage field, as well as non-polynomial degradation functions. Two categories of degradation functions are examined, and a process to derive a given degradation function based on a local stress-strain response in the cohesive zone is presented. The resulting model is characterized by a linear elastic regime prior to the onset of damage, and controlled strain-softening thereafter. The governing equations are derived according to macro- and microforce balance theories, naturally accounting for the irreversible nature of the fracture process by introducing suitable constraints for the kinetics of the underlying microstructural changes. The model is complemented by an efficient staggered solution scheme based on an augmented Lagrangian method. Numerical examples demonstrate that the proposed model is a robust and effective method for simulating cohesive crack propagation, with particular emphasis on dynamic fracture.
△ Less
Submitted 1 August, 2018;
originally announced September 2018.