Showing 1–50 of 139 results for author: Gu, Y

Quantum CZ Gate based on Single Gradient Metasurface

Authors: Qi Liu, Yu Tian, Zhaohua Tian, Guixin Li, Xi-Feng Ren, Qihuang Gong, Ying Gu

Abstract: We propose a scheme to realize quantum controlled-Z (CZ) gates through single gradient metasurface. Using its unique parallel beam-splitting feature, i.e., a series of connected beam splitters with the same splitting ratio, one metasurface can support a CZ gate, several independent CZ gates, or a cascaded CZ gates. Taking advantage of the input polarization determined output path-locking feature,… ▽ More We propose a scheme to realize quantum controlled-Z (CZ) gates through single gradient metasurface. Using its unique parallel beam-splitting feature, i.e., a series of connected beam splitters with the same splitting ratio, one metasurface can support a CZ gate, several independent CZ gates, or a cascaded CZ gates. Taking advantage of the input polarization determined output path-locking feature, both polarization-encoded and path-encoded CZ gates can be demonstrated on the same metasurface, which further improves the integration level of quantum devices. Our research paves the way for integrating quantum logical function through the metasurface. △ Less

Submitted 16 May, 2024; originally announced May 2024.

Using Micromegas detectors for direct dark matter searches: challenges and perspectives

Authors: K. Altenmueller, . Antolin, D. Calvet, F. R. Candon, J. Castel, S. Cebrian, C. Cogollos, T. Dafni, D. Diez Ibanez, E. Ferrer-Ribas, J. Galan, J. A. Garcia, H. Gomez, Y. Gu, A. Ezquerro, I. G Irastorza, G. Luzon, C. Margalejo, H. Mirallas, L. Obis, A. Ortiz de Solorzano, T. Papaevangelou, O. Perez, E. Picatoste, J. Porron , et al. (5 additional authors not shown)

Abstract: Gas time projection chambers (TPCs) with Micromegas pixelated readouts are being used in dark matter searches and other rare event searches, due to their potential in terms of low background levels, energy and spatial resolution, gain, and operational stability. Moreover, these detectors can provide precious features,such as topological information, allowing for event directionality and powerful s… ▽ More Gas time projection chambers (TPCs) with Micromegas pixelated readouts are being used in dark matter searches and other rare event searches, due to their potential in terms of low background levels, energy and spatial resolution, gain, and operational stability. Moreover, these detectors can provide precious features,such as topological information, allowing for event directionality and powerful signal-background discrimination. The Micromegas technology of the microbulk type is particularly suited to low-background applications and is being exploited by detectors for CAST and IAXO (solar axions) and TREX-DM (low-mass WIMPs) experiments. Challenges for the future include reducing intrinsic background levels, reaching lower energy detection levels, and technical issues such as robustness of detector, new design choices, novel gas mixtures and operation points, scaling up to larger detector sizes, handling large readout granularity, etc. We report on the status and prospects of the development ongoing in the context of IAXO and TREX-DM experiments, pointing to promising perspectives for the use of Micromegas detectors in directdark matter searches △ Less

Submitted 15 April, 2024; originally announced April 2024.

Realizing Laser-driven Deuteron Acceleration with Low Energy Spread via In-situ D$_2$O-deposited Target

Authors: Tianyun Wei, Yasunobu Arikawa, Seyed Reza Mirfayzi, Yanjun Gu, Takehito Hayakawa, Alessio Morace, Kunioki Mima, Zechen Lan, Ryuya Yamada, Kohei Yamanoi, Koichi Honda, Sergei V. Bulanov, Akifumi Yogo

Abstract: Generation of quasi-monoenergetic ion pulse by laser-driven acceleration is one of the hot topics in laser plasma physics. In this study, we present a new method for the \textit{In-situ} deposition of an ultra-thin D$_2$O layer on the surface of an aluminum foil target utilizing a spherical D$_2$O capsule. Employing a 10$^{19}$ W/cm$^2$ laser, we achieve the acceleration of 10.8 MeV deuterons with… ▽ More Generation of quasi-monoenergetic ion pulse by laser-driven acceleration is one of the hot topics in laser plasma physics. In this study, we present a new method for the \textit{In-situ} deposition of an ultra-thin D$_2$O layer on the surface of an aluminum foil target utilizing a spherical D$_2$O capsule. Employing a 10$^{19}$ W/cm$^2$ laser, we achieve the acceleration of 10.8 MeV deuterons with an energy spread of $Δ$E/E = 4.6% in the most favorable shot. The energy spread depends on the exposure time of the D$_2$O capsule in the vacuum chamber. This method has the potential to extend its applicability to other ion species. △ Less

Submitted 1 June, 2024; v1 submitted 11 April, 2024; originally announced April 2024.

Improving tracking algorithms with machine learning: a case for line-segment tracking at the High Luminosity LHC

Authors: Jonathan Guiang, Slava Krutelyov, Manos Vourliotis, Yanxi Gu, Avi Yagil, Balaji Venkat Sathia Narayanan, Matevz Tadel, Philip Chang, Mayra Silva, Gavin Niendorf, Peter Wittich, Tres Reid, Peter Elmer

Abstract: In this work, we present a study on ways that tracking algorithms can be improved with machine learning (ML). We base this study on the line segment tracking (LST) algorithm that we have designed to be naturally parallelized and vectorized in order to efficiently run on modern processors. LST has been developed specifically for the CMS Experiment at the LHC, towards the High Luminosity LHC (HL-LHC… ▽ More In this work, we present a study on ways that tracking algorithms can be improved with machine learning (ML). We base this study on the line segment tracking (LST) algorithm that we have designed to be naturally parallelized and vectorized in order to efficiently run on modern processors. LST has been developed specifically for the CMS Experiment at the LHC, towards the High Luminosity LHC (HL-LHC) upgrade. Moreover, we have already shown excellent efficiency and performance results as we iteratively improve LST, leveraging a full simulation of the CMS detector. At the same time, promising deep-learning-based tracking algorithms, such as Graph Neural Networks (GNNs), are being pioneered on the simplified TrackML dataset. These results suggest that parts of LST could be improved or replaced by ML. Thus, a thorough, step-by-step investigation of exactly how and where ML can be utilized, while still meeting realistic HL-LHC performance and efficiency constraints, is implemented as follows. First, a lightweight neural network is used to replace and improve upon explicitly defined track quality selections. This neural network is shown to be highly efficient and robust to displaced tracks while having little-to-no impact on the runtime of LST. These results clearly establish that ML can be used to improve LST without penalty. Next, exploratory studies of GNN track-building algorithms are described. In particular, low-level track objects from LST are considered as nodes in a graph, where edges represent higher-level objects or even entire track candidates. Then, an edge-classifier GNN is trained, and the efficiency of the resultant edge scores is compared with that of the existing LST track quality selections. These GNN studies provide insights into the practicality and performance of using more ambitious and complex ML algorithms for HL-LHC tracking at the CMS Experiment. △ Less

Submitted 19 March, 2024; originally announced March 2024.

Comments: Connecting the Dots Workshop (CTD 2023)

A Parallel Beam Splitting Based on Gradient Metasurface: Preparation and Fusion of Quantum Entanglement

Authors: Qi Liu, Xuan Liu, Yu Tian, Zhaohua Tian, Guixin Li, Xi-Feng Ren, Qihuang Gong, Ying Gu

Abstract: Gradient metasurface, formed by a set of subwavelength unit cells with different phase modulation, is widely used in polarized beam splitting (BS) in the classical and quantum optics. Specifically, its phase gradient allows the path and polarization of multiple output lights to be locked by corresponding inputs.Using this unique path-polarization locked property, we demonstrate that the single met… ▽ More Gradient metasurface, formed by a set of subwavelength unit cells with different phase modulation, is widely used in polarized beam splitting (BS) in the classical and quantum optics. Specifically, its phase gradient allows the path and polarization of multiple output lights to be locked by corresponding inputs.Using this unique path-polarization locked property, we demonstrate that the single metasurface can function as sequentially linked beamsplitters, enabling the parallelization of a series of BS processes. Such a parallel BS metasurface provides a multi-beam interference capability for both classical and quantum light manipulation. Taking this advantage, we first prepare path and polarization hybrid entangled states of two, three, and multi photons from unentangled photon sources. Then, the ability of parallel BS-facilitated entanglement is applied to demonstrate entanglement fusion among entangled photon pairs, which can greatly enlarge the entanglement dimension. The principle of parallel BS through the metasurface opens up a versatile way to manipulate the quantum state at the micro/nano scale, which will have potential applications in on-chip quantum optics and quantum information processing. △ Less

Submitted 13 March, 2024; originally announced March 2024.

Experimental demonstration of Contextual Advantage in minimum error and maximum confidence mirror-state discrimination

Authors: Xuan Fan, Ya Xiao, Yongjian Gu

Abstract: Contextuality is well known as a vital resource for locating the boundary between classical and quantum theories, as well as identifying tasks showing quantum advantage. In a surge of recent works [Schmid and Spekkens, Phys.Rev.X 8, 011015 (2018); Mukherjee, Naonit and Pan, Phys.Rev.A 106, 012216 (2022); Flatt, Lee, Carceller, Brask and Bae, PRX QUANTUM 3, 030337 (2022)], it has also been shown th… ▽ More Contextuality is well known as a vital resource for locating the boundary between classical and quantum theories, as well as identifying tasks showing quantum advantage. In a surge of recent works [Schmid and Spekkens, Phys.Rev.X 8, 011015 (2018); Mukherjee, Naonit and Pan, Phys.Rev.A 106, 012216 (2022); Flatt, Lee, Carceller, Brask and Bae, PRX QUANTUM 3, 030337 (2022)], it has also been shown that contextuality is the crucial resource in quantum state discrimination (QSD) tasks, including minimum error discrimination (MED) and maximum confidence discrimination (MCD), together with many other figure-of-merits. Despite the fundamental progress made by those aforementioned works, none of them mention about how to realize their fancy proposals, which is doubtlessly necessary for the final goal of applying this resource in real QSD tasks. In this paper, we report the first experimental demonstration of contextual advantage in both MED and MCD for three mirror-symmetric states using interferometric quantum walk, which can be easily generalized to any figure-of-merit in QSD. Our experiment agrees well with the result of theoretical simulation, and also shows the great potentiality of leveraging this method to explore a simpler version for the witness of contextuality, as well as demonstrating quanutm advantage of various tasks that require QSD. △ Less

Submitted 12 March, 2024; originally announced March 2024.

Comments: 6 pages, 5 figures

Cascade enhancement of magnetic dipole emission and efficient collection of photons by the hybrid topological structure

Authors: Yali Jia, Zhaohua Tian, Qi Liu, Zihan Mo, Qihuang Gong, Ying Gu

Abstract: High photon emission rate, high collection efficiency and stability are all important for single photon source applications. Here we demonstrate that both cascade enhancement of magnetic dipole emission and efficient collection of emitted photons can be realized simultaneously in a hybrid structure of a two-dimensional honeycomb topological photonic crystal containing dielectric nanodisk. The magn… ▽ More High photon emission rate, high collection efficiency and stability are all important for single photon source applications. Here we demonstrate that both cascade enhancement of magnetic dipole emission and efficient collection of emitted photons can be realized simultaneously in a hybrid structure of a two-dimensional honeycomb topological photonic crystal containing dielectric nanodisk. The magnetic dipole resonance of nanodisk can effectively excite topological edgestate due to their near field overlapping. If a magnetic emitter is used to excite the nanodisk, then its magnetic dipole resonance can be viewed as a large equivalent dipole interacting with the edgestates, which achieves the cascade enhancement of the magnetic emitter. In addition, almost all the scattered photons around the nanodisk can be collected through topological edge state with the collection efficiency up to 95%. The proposed mechanism may provide the practical applications of on-chip robust single photon sources and nanolasers. △ Less

Submitted 5 March, 2024; originally announced March 2024.

Photon-exciton strong coupling induced by topological edge state

Authors: Yali Jia, Zihan Mo, Qi Liu, Zhaohua Tian, Yu Tian, Qihuang Gong, Ying Gu

Abstract: Strong coupling between single quantum emitter and dielectric nanoparticle has not been achieved due to large scattering loss of dielectric nanoparticle. Here we propose strong photon-exciton coupling mechanism under topological protection. In hybrid two-dimensional topological photonic crystal structure containing gap dielectric nanoantenna, owing to the robustness of the topological pattern, the… ▽ More Strong coupling between single quantum emitter and dielectric nanoparticle has not been achieved due to large scattering loss of dielectric nanoparticle. Here we propose strong photon-exciton coupling mechanism under topological protection. In hybrid two-dimensional topological photonic crystal structure containing gap dielectric nanoantenna, owing to the robustness of the topological pattern, the photons originally scattered to the surrounding area can be guided into the edge-state channel, so the linewidth of nanoantenna is greatly narrowed. Simultaneously, the stronger local field in the nanoantenna gap provides a relatively large coupling coefficient. Therefore, strong coupling condition is achieved. Our results demonstrate the potential of dielectric structures as a platform for studying cavity quantum electrodynamics in a single quantum level. △ Less

Submitted 5 March, 2024; originally announced March 2024.

A Configurable Ultra-Low Noise Current Source for Transition-Edge Sensor Characterization

Authors: N. Li, G. Liao, D. Yan, Y. Xu, Y. Zhang, Z. Liu, S. Yuan, Y. Zhang, H. Gao, Y. Li, Y. Gu, C. Liu, H. Li, Z. Li, X. Ren

Abstract: Transition-edge sensors (TESs) are sensitive devices for detecting photons from millimeter radiation to gamma rays. Their photon counting efficiency and collecting area benefit from large-array multiplexing scheme, and therefore the development of multiplexing readout system has been an important topic in this field. Among the many multiplex techniques, time-division multiplexing (TDM) superconduc… ▽ More Transition-edge sensors (TESs) are sensitive devices for detecting photons from millimeter radiation to gamma rays. Their photon counting efficiency and collecting area benefit from large-array multiplexing scheme, and therefore the development of multiplexing readout system has been an important topic in this field. Among the many multiplex techniques, time-division multiplexing (TDM) superconducting quantum interference device (SQUID) has been used most widely for TES readout. In this work, we design a Configurable Ultra-Low Noise Current Source (CLCS) for TES characterization and as a part of a whole TDM-TES bias control system. The CLCS is based on the feedback structure of ultra-low noise instrumentation amplifiers and low-noise, high-resolution (20 bits) digital-to-analog converter (DAC). CLCS has an ultra-high resolution of 10 nA in the 0 to 5 mA current output range, and can perform current-voltage (IV) sweep and bias-step tests to measure key TES parameters on board. The feedback structure of the CLCS also avoids the issue of impedance mismatch. △ Less

Submitted 2 April, 2024; v1 submitted 20 December, 2023; originally announced December 2023.

Comments: 11 pages, 9 figures

Efficient fault-tolerant implementations of non-Clifford gates with reconfigurable atom arrays

Authors: Yi-Fei Wang, Yixu Wang, Yu-An Chen, Wenjun Zhang, Tao Zhang, Jiazhong Hu, Wenlan Chen, Yingfei Gu, Zi-Wen Liu

Abstract: To achieve scalable universal quantum computing, we need to implement a universal set of logical gates fault-tolerantly, for which the main difficulty lies with non-Clifford gates. We demonstrate that several characteristic features of the reconfigurable atom array platform are inherently well-suited for addressing this key challenge, potentially leading to significant advantages in fidelity and e… ▽ More To achieve scalable universal quantum computing, we need to implement a universal set of logical gates fault-tolerantly, for which the main difficulty lies with non-Clifford gates. We demonstrate that several characteristic features of the reconfigurable atom array platform are inherently well-suited for addressing this key challenge, potentially leading to significant advantages in fidelity and efficiency. Specifically, we consider a series of different strategies including magic state distillation, concatenated code array, and fault-tolerant logical multi-controlled-$Z$ gates, leveraging key platform features such as non-local connectivity, parallel gate action, collective mobility, and native multi-controlled-$Z$ gates. Our analysis provides valuable insights into the efficient experimental realization of logical gates, serving as a guide for the full-cycle demonstration of fault-tolerant quantum computation with reconfigurable atom arrays. △ Less

Submitted 12 February, 2024; v1 submitted 14 December, 2023; originally announced December 2023.

Theoretical and experimental study of attenuation in cancellous bone

Authors: Wenyi Xu, Weiya Xie, Dong Yu, Haohan Sun, Ying Gu, Xingliang Tao, Menglu Qian, Liming Cheng, Hao Wang, Qian Cheng

Abstract: Photoacoustic (PA) technology can provide information on both the physical structure and chemical composition of bone, showing great potential in bone assessment. However, due to the complex composition and porous structure of cancellous bone, the PA signals generated and propagated in cancellous bone are complex and difficult to be directly used in cancellous bone analysis. In this paper, a photo… ▽ More Photoacoustic (PA) technology can provide information on both the physical structure and chemical composition of bone, showing great potential in bone assessment. However, due to the complex composition and porous structure of cancellous bone, the PA signals generated and propagated in cancellous bone are complex and difficult to be directly used in cancellous bone analysis. In this paper, a photoacoustic differential attenuation spectrum (PA-DAS) method is proposed. By eliminating the PA spectrum of the optical absorption sources, the propagation attenuation characteristics of cancellous bone are studied theoretically and experimentally. An analytical solution for the propagation attenuation of broadband ultrasound waves in cancellous bone is given by applying high-frequency and viscous corrections to Biot's theory. An experimental system of PA-DAS with an eccentric excitation differential detection system is established to obtain the PA-DAS of cancellous bone and its acoustic propagation characteristic on the rabbit osteoporosis model. The PA-DAS quantization parameter slope is further extracted to quantify the attenuation of high and low frequency components. The results show that the PA-DAS can distinguish osteoporotic bone from normal bone, enabling quantitative assessment of bone mineral density and the diagnosis of osteoporosis. △ Less

Submitted 28 November, 2023; originally announced November 2023.

Comments: 21 pages, 9 figures, 2 tables

Journal ref: Wenyi Xu, Weiya Xie, Dong Yu, Haohan Sun, Ying Gu, Xingliang Tao, Menglu Qian, Liming Cheng, Hao Wang, Qian Cheng, Theoretical and experimental study of attenuation in cancellous bone, J. Biomed. Opt. 29(S1), S11526 (2024)

Generation of polarized electron beams through self-injection in the interaction of a laser with a pre-polarized plasma

Authors: L. R. Yin, X. F. Li, Y. J. Gu, N. Cao, Q. Kong, M. Buescher, S. M. Weng, M. Chen, Z. M. Sheng

Abstract: Polarized electron beam production via laser wakefield acceleration in pre-polarized plasma is investigated by particle-in-cell simulations. The evolution of the electron beam polarization is studied based on the Thomas-Bargmann-Michel-Telegdi equation for the transverse and longitudinal self-injection, and the depolarization process is found to be influenced by the injection schemes. In the case… ▽ More Polarized electron beam production via laser wakefield acceleration in pre-polarized plasma is investigated by particle-in-cell simulations. The evolution of the electron beam polarization is studied based on the Thomas-Bargmann-Michel-Telegdi equation for the transverse and longitudinal self-injection, and the depolarization process is found to be influenced by the injection schemes. In the case of transverse self-injection as found typically in the bubble regime, the spin precession of the accelerated electrons is mainly influenced by the wakefield. However, in the case of longitudinal injection in the quasi-one-dimensional regime (for example, F. Y. Li \emph{et al}., Phys. Rev. Lett. 110, 135002 (2013)), the direction of electron spin oscillates in the laser filed. Since the electrons move around the laser axis, the net influence of the laser field is nearly zero and the contribution of the wakefield can be ignored. Finally, an ultra-short electron beam with polarization of $99\%$ can be obtained using longitudinal self-injection. △ Less

Submitted 25 November, 2023; originally announced November 2023.

Comments: 7 pages, 4 figures

Effective electrical manipulation of topological antiferromagnet by orbital Hall effect

Authors: Zhenyi Zheng, Tao Zeng, Tieyang Zhao, Shu Shi, Lizhu Ren, Tongtong Zhang, Lanxin Jia, Youdi Gu, Rui Xiao, Hengan Zhou, Qihan Zhang, Jiaqi Lu, Guilei Wang, Chao Zhao, Huihui Li, Beng Kang Tay, Jingsheng Chen

Abstract: Electrical control of the non-trivial topology in Weyl antiferromagnet is of great interests to develop next-generation spintronic devices. Recent works suggest that spin Hall effect can switch the topological antiferromagnetic order. However, the switching efficiency remains relatively low. Here, we demonstrate effective manipulation of antiferromagnetic order in Weyl semimetal Mn3Sn by orbital H… ▽ More Electrical control of the non-trivial topology in Weyl antiferromagnet is of great interests to develop next-generation spintronic devices. Recent works suggest that spin Hall effect can switch the topological antiferromagnetic order. However, the switching efficiency remains relatively low. Here, we demonstrate effective manipulation of antiferromagnetic order in Weyl semimetal Mn3Sn by orbital Hall effect originated from metal Mn or oxide CuOx. While Mn3Sn is proven to be able to convert orbit current to spin current by itself, we find that inserting a heavy metal layer like Pt with proper thickness can effectively reduce the critical switching current density by one order of magnitude. In addition, we show that the memristor-like switching behavior of Mn3Sn can mimic the potentiation and depression processes of a synapse with high linearity, which is beneficial for constructing artificial neural network with high accuracy. Our work paves an alternative way to manipulate topological antiferromagnetic order and may inspire more high-performance antiferromagnetic functional devices. △ Less

Submitted 14 October, 2023; originally announced October 2023.

Comments: 13 pages, 4 figures

Charge equilibration of Laser-accelerated Carbon Ions in Foam Target

Authors: Bubo Ma, Jieru Ren, Lirong Liu, Wenqing Wei, Benzheng Chen, Shizheng Zhang, Hao Xu, Zhongmin Hu, Fangfang Li, Xing Wang, Shuai Yin, Jianhua Feng, Xianming Zhou, Yifang Gao, Yuan Li, Xiaohua Shi, Jianxing Li, Xueguang Ren, Zhongfeng Xu, Zhigang Deng, Wei Qi, Shaoyi Wang, Quanping Fan, Bo Cui, Weiwu Wang , et al. (17 additional authors not shown)

Abstract: The charge equilibration of laser-accelerated carbon ion beams in 2 mg/cm3 foam target was investigated experimentally. The ions were generated through target normal sheath acceleration mechanism in laser-foil interaction scheme. This allows to get the equilibrium charge state in wide energy range near Bragg peak within a single shot. By using foam, the charge equilibration measurement in density… ▽ More The charge equilibration of laser-accelerated carbon ion beams in 2 mg/cm3 foam target was investigated experimentally. The ions were generated through target normal sheath acceleration mechanism in laser-foil interaction scheme. This allows to get the equilibrium charge state in wide energy range near Bragg peak within a single shot. By using foam, the charge equilibration measurement in density regime between gas and solid state was firstly reached out experimentally. It was found that the theoretical predictions with tabulated cross section data for gas target greatly underestimated the charge states. The experimental data are in close agreement with both semi-empirical formula as well as rate equation predictions based on ion-solid interactions. The important role of target density effects that increase the ionization probability and decrease the electron capture probability through frequent multi-collisions in foam are demonstrated. The double electron processes are shown to have little influence on the average charge states. The findings are essential for high energy density physics research where the foams are widely used, and have impacts on a broad range of applications in medical, biological and material fields. The method also provides a new approach to investigate the interaction mechanism of swift heavy ions in matter by taking advantage of the laser-accelerated short-pulse wide-energy range ions. △ Less

Submitted 2 October, 2023; originally announced October 2023.

Comparisons among the Performances of Randomized-framed Benchmarking Protocols under T1, T2 and Coherent Error Models

Authors: Xudan Chai, Yanwu Gu, Weifeng Zhuang, Peng Qian, Xiao Xiao, Dong E Liu

Abstract: While fundamental scientific researchers are eagerly anticipating the breakthroughs of quantum computing both in theory and technology, the current quantum computer, i.e. noisy intermediate-scale quantum (NISQ) computer encounters a bottleneck in how to deal with the noisy situation of the quantum machine. It is still urgently required to construct more efficient and reliable benchmarking protocol… ▽ More While fundamental scientific researchers are eagerly anticipating the breakthroughs of quantum computing both in theory and technology, the current quantum computer, i.e. noisy intermediate-scale quantum (NISQ) computer encounters a bottleneck in how to deal with the noisy situation of the quantum machine. It is still urgently required to construct more efficient and reliable benchmarking protocols through which one can assess the noise level of a quantum circuit that is designed for a quantum computing task. The existing methods that are mainly constructed based on a sequence of random circuits, such as randomized benchmarking (RB), have been commonly adopted as the conventional approach owning to its reasonable resource consumption and relatively acceptable reliability, compared with the average gate fidelity. To more deeply understand the performances of the above different randomized-framed benchmarking protocols, we design special random circuit sequences to test the performances of the three selected standard randomized-frame protocols under T1, T2, and coherent errors, which are regarded to be more practical for a superconductor quantum computer. The simulations indicate that MRB, DRB, and CRB sequentially overestimate the average error rate in the presence of T1 and T2 noise, compared with the conventional circuit's average error. Moreover, these methods exhibit almost the same level of sensitivity to the coherent error. Furthermore, the DRB loses its reliability when the strengths of T1 grow. More practically, the simulated conclusion is verified by running the designed tasks for three protocols on the Quafu quantum computation cloud platform. We find that MRB produces a more precise assessment of a quantum circuit conditioned on limited resources. However, the DRB provides a more stable estimation at a specific precision while a more resource-consuming. △ Less

Submitted 27 September, 2023; originally announced September 2023.

SOT-MRAM-Enabled Probabilistic Binary Neural Networks for Noise-Tolerant and Fast Training

Authors: Puyang Huang, Yu Gu, Chenyi Fu, Jiaqi Lu, Yiyao Zhu, Renhe Chen, Yongqi Hu, Yi Ding, Hongchao Zhang, Shiyang Lu, Shouzhong Peng, Weisheng Zhao, Xufeng Kou

Abstract: We report the use of spin-orbit torque (SOT) magnetoresistive random-access memory (MRAM) to implement a probabilistic binary neural network (PBNN) for resource-saving applications. The in-plane magnetized SOT (i-SOT) MRAM not only enables field-free magnetization switching with high endurance (> 10^11), but also hosts multiple stable probabilistic states with a low device-to-device variation (< 6… ▽ More We report the use of spin-orbit torque (SOT) magnetoresistive random-access memory (MRAM) to implement a probabilistic binary neural network (PBNN) for resource-saving applications. The in-plane magnetized SOT (i-SOT) MRAM not only enables field-free magnetization switching with high endurance (> 10^11), but also hosts multiple stable probabilistic states with a low device-to-device variation (< 6.35%). Accordingly, the proposed PBNN outperforms other neural networks by achieving an 18* increase in training speed, while maintaining an accuracy above 97% under the write and read noise perturbations. Furthermore, by applying the binarization process with an additional SOT-MRAM dummy module, we demonstrate an on-chip MNIST inference performance close to the ideal baseline using our SOT-PBNN hardware. △ Less

Submitted 20 September, 2023; v1 submitted 14 September, 2023; originally announced September 2023.

Evolution of Maximum Bending Strain on Poisson's Ratio Distribution

Authors: Yang Li, Le Zhang, Dehua Wang, Limei Hou, Shanmei Du, Yang Deng, Yanfeng Du, Yingfei Xin, Chongyang Fu, Yan Gu, Xiaoxiong Wang

Abstract: In recent years, new flexible functional materials have attracted increasing interest, but there is a lack of the designing mechanisms of flexibility design with superstructures. In traditional engineering mechanics, the maximum bending strain (MBS) was considered universal for describing the bendable properties of a given material, leading to the universal designing method of lowering the dimensi… ▽ More In recent years, new flexible functional materials have attracted increasing interest, but there is a lack of the designing mechanisms of flexibility design with superstructures. In traditional engineering mechanics, the maximum bending strain (MBS) was considered universal for describing the bendable properties of a given material, leading to the universal designing method of lowering the dimension such as thin membranes designed flexible functional materials.In this work, the MBS was found only applicable for materials with uniformly distributed Poisson's ratio, while the MBS increases with the thickness of the given material in case there is a variation Poisson's ratio in different areas. This means the MBS can be enhanced by certain Poisson's ratio design in the future to achieve better flexibility of thick materials. Here, the inorganic freestanding nanofiber membranes, which have a nonconstant Poisson's ratio response on stress/strain for creating nonuniformly distributed Poisson's ratio were proven applicable for designing larger MBS and lower Young's modulus for thicker samples. △ Less

Submitted 4 September, 2023; originally announced September 2023.

Proton-Boron Fusion Yield Increased by Orders of Magnitude with Foam Targets

Authors: Wen-Qing Wei, Shi-Zheng Zhang, Zhi-Gang Deng, Wei Qi, Hao Xu, Li-Rong Liu, Jia-Lin Zhang, Fang-Fang Li, Xing Xu, Zhong-Min Hu, Ben-Zheng Chen, Bu-Bo Ma, Jian-Xing Li, Xue-Guang Ren, Zhong-Feng Xu, Dieter H. H. Hoffmann, Quan-Ping Fan, Wei-Wu Wang, Shao-Yi Wang, Jian Teng, Bo Cui, Feng Lu, Lei Yang, Yu-Qiu Gu, Zong-Qing Zhao , et al. (13 additional authors not shown)

Abstract: A novel intense beam-driven scheme for high yield of the tri-alpha reaction 11B(p,α)2α was investigated. We used a foam target made of cellulose triacetate (TAC, C_9H_{16}O_8) doped with boron. It was then heated volumetrically by soft X-ray radiation from a laser heated hohlraum and turned into a homogenous, and long living plasma. We employed a picosecond laser pulse to generate a high-intensity… ▽ More A novel intense beam-driven scheme for high yield of the tri-alpha reaction 11B(p,α)2α was investigated. We used a foam target made of cellulose triacetate (TAC, C_9H_{16}O_8) doped with boron. It was then heated volumetrically by soft X-ray radiation from a laser heated hohlraum and turned into a homogenous, and long living plasma. We employed a picosecond laser pulse to generate a high-intensity energetic proton beam via the well-known Target Normal Sheath Acceleration (TNSA) mechanism. We observed up to 10^{10}/sr α particles per laser shot. This constitutes presently the highest yield value normalized to the laser energy on target. The measured fusion yield per proton exceeds the classical expectation of beam-target reactions by up to four orders of magnitude under high proton intensities. This enhancement is attributed to the strong electric fields and nonequilibrium thermonuclear fusion reactions as a result of the new method. Our approach shows opportunities to pursue ignition of aneutronic fusion. △ Less

Submitted 21 August, 2023; originally announced August 2023.

Efficient production of nuclear isomer $^{93m}$Mo with laser-accelerated proton beam and an astrophysical implication on $^{92m}$Mo production

Authors: Wenru Fan, Wei Qi, Jingli Zhang, Zongwei Cao, Haoyang Lan, Xinxiang Li, Yi Xu, Yuqiu Gu, Zhigang Deng, Zhimeng Zhang, Changxiang Tan, Wen Luo, Yun Yuan, Weimin Zhou

Abstract: Nuclear isomers play a key role in the creation of the elements in the universe and have a number of fascinating potential applications related to the controlled release of nuclear energy on demand. Particularly, $^{93m}$Mo isomer is a good candidate for studying the depletion of nuclear isomer via nuclear excitation by electron capture. For such purposes, efficient approach for $^{93m}$Mo product… ▽ More Nuclear isomers play a key role in the creation of the elements in the universe and have a number of fascinating potential applications related to the controlled release of nuclear energy on demand. Particularly, $^{93m}$Mo isomer is a good candidate for studying the depletion of nuclear isomer via nuclear excitation by electron capture. For such purposes, efficient approach for $^{93m}$Mo production needs to be explored. In the present work, we demonstrate experimentally an efficient production of $^{93m}$Mo through $^{93}$Nb(p, n) reaction induced by intense laser pulse. When a ps-duration, 100-J laser pulse is employed, the $^{93m}$Mo isomer at 2425 keV (21/2$^+$, $T_{1/2}$ = 6.85 h) are generated with a high yield of $1.8\times10^6$ particles/shot. The resulting peak efficiency is expected to be $10^{17}$ particles/s, which is at least five orders of magnitudes higher than using classical proton accelerator. The effects of production and destruction of $^{93m}$Mo on the controversial astrophysical p-isotope $^{92}$Mo are studied. It is found that the $^{93}$Nb(p, n)-$^{93m}$Mo reaction is an important production path for ^{93m}Mo seed nucleus, and the influence of ^{93m}Mo-^{92}Mo reaction flow on ^{92}Mo production cannot be ignored. In addition, we propose to directly measure the astrophysical rate of (p, n) reaction using laser-induced proton beam since the latter one fits the Maxwell-Boltzmann distribution well. We conclude that laser-induced proton beam opens a new path to produce nuclear isomers with high peak efficiency towards the understanding of p-nuclei nucleosythesis. △ Less

Submitted 5 August, 2023; originally announced August 2023.

Comments: 21 pages, 9 figure

Breathing Green: Maximising Health and Environmental Benefits for Active Transportation Users Leveraging Large Scale Air Quality Data

Authors: Sen Yan, Shaoshu Zhu, Jaime B. Fernandez, Eric Arazo Sánchez, Yingqi Gu, Noel E. O'Connor, David O'Connor, Mingming Liu

Abstract: Pollution in urban areas can have significant adverse effects on the health and well-being of citizens, with traffic-related air pollution being a major concern in many cities. Pollutants emitted by vehicles, such as nitrogen oxides, carbon monoxide, and particulate matter, can cause respiratory and cardiovascular problems, particularly for vulnerable road users like pedestrians and cyclists. Furt… ▽ More Pollution in urban areas can have significant adverse effects on the health and well-being of citizens, with traffic-related air pollution being a major concern in many cities. Pollutants emitted by vehicles, such as nitrogen oxides, carbon monoxide, and particulate matter, can cause respiratory and cardiovascular problems, particularly for vulnerable road users like pedestrians and cyclists. Furthermore, recent research has indicated that individuals living in more polluted areas are at a greater risk of developing chronic illnesses such as asthma, allergies, and cancer. Addressing these problems is crucial to protecting public health and maximising environmental benefits. In this project, we explore the feasibility of tackling this challenge by leveraging big data analysis and data-driven methods. Specifically, we investigate the recently released Google Air Quality dataset and devise an optimisation strategy to suggest green travel routes for different types of active transportation users in Dublin. To demonstrate our achievement, we have developed a prototype and have shown that citizens who use our model to plan their outdoor activities can benefit notably, with a significant decrease of 17.87% on average in pollutant intake, from the environmental advantages it offers. △ Less

Submitted 4 August, 2023; v1 submitted 28 July, 2023; originally announced July 2023.

Comments: The manuscript has been accepted by the IEEE ITSC 2023

A proposal for a low-frequency axion search in the 1-2 $μ$eV range and below with the BabyIAXO magnet

Authors: S. Ahyoune, A. Álvarez Melcón, S. Arguedas Cuendis, S. Calatroni, C. Cogollos, J. Devlin, A. Díaz-Morcillo, D. Díez-Ibáñez, B. Döbrich, J. Galindo, J. D. Gallego, J. M. García-Barceló, B. Gimeno, J. Golm, Y. Gu, L. Herwig, I. G. Irastorza, A. J. Lozano-Guerrero, C. Malbrunot, J. Miralda-Escudé, J. Monzó-Cabrera, P. Navarro, J. R. Navarro-Madrid, J. Redondo, J. Reina-Valero , et al. (5 additional authors not shown)

Abstract: In the near future BabyIAXO will be the most powerful axion helioscope, relying on a custom-made magnet of two bores of 70 cm diameter and 10 m long, with a total available magnetic volume of more than 7 m$^3$. In this document, we propose and describe the implementation of low-frequency axion haloscope setups suitable for operation inside the BabyIAXO magnet. The RADES proposal has a potential se… ▽ More In the near future BabyIAXO will be the most powerful axion helioscope, relying on a custom-made magnet of two bores of 70 cm diameter and 10 m long, with a total available magnetic volume of more than 7 m$^3$. In this document, we propose and describe the implementation of low-frequency axion haloscope setups suitable for operation inside the BabyIAXO magnet. The RADES proposal has a potential sensitivity to the axion-photon coupling $g_{aγ}$ down to values corresponding to the KSVZ model, in the (currently unexplored) mass range between 1 and 2$~μ$eV, after a total effective exposure of 440 days. This mass range is covered by the use of four differently dimensioned 5-meter-long cavities, equipped with a tuning mechanism based on inner turning plates. A setup like the one proposed would also allow an exploration of the same mass range for hidden photons coupled to photons. An additional complementary apparatus is proposed using LC circuits and exploring the low energy range ($\sim10^{-4}-10^{-1}~μ$eV). The setup includes a cryostat and cooling system to cool down the BabyIAXO bore down to about 5 K, as well as appropriate low-noise signal amplification and detection chain. △ Less

Submitted 22 November, 2023; v1 submitted 29 June, 2023; originally announced June 2023.

Energy loss enhancement of very intense proton beams in dense matter due to the beam-density effect

Authors: Benzheng Chen, Jieru Ren, Zhigang Deng, Wei Qi, Zhongmin Hu, Bubo Ma, Xing Wang, Shuai Yin, Jianhua Feng, Wei Liu, Zhongfeng Xu, Dieter H. H. Hoffmann, Shaoyi Wang, Quanping Fan, Bo Cui, Shukai He, Zhurong Cao, Zongqing Zhao, Leifeng Cao, Yuqiu Gu, Shaoping Zhu, Rui Cheng, Xianming Zhou, Guoqing Xiao, Hongwei Zhao , et al. (5 additional authors not shown)

Abstract: Thoroughly understanding the transport and energy loss of intense ion beams in dense matter is essential for high-energy-density physics and inertial confinement fusion. Here, we report a stopping power experiment with a high-intensity laser-driven proton beam in cold, dense matter. The measured energy loss is one order of magnitude higher than the expectation of individual particle stopping model… ▽ More Thoroughly understanding the transport and energy loss of intense ion beams in dense matter is essential for high-energy-density physics and inertial confinement fusion. Here, we report a stopping power experiment with a high-intensity laser-driven proton beam in cold, dense matter. The measured energy loss is one order of magnitude higher than the expectation of individual particle stopping models. We attribute this finding to the proximity of beam ions to each other, which is usually insignificant for relatively-low-current beams from classical accelerators. The ionization of the cold target by the intense ion beam is important for the stopping power calculation and has been considered using proper ionization cross section data. Final theoretical values agree well with the experimental results. Additionally, we extend the stopping power calculation for intense ion beams to plasma scenario based on Ohm's law. Both the proximity- and the Ohmic effect can enhance the energy loss of intense beams in dense matter, which are also summarized as the beam-density effect. This finding is useful for the stopping power estimation of intense beams and significant to fast ignition fusion driven by intense ion beams. △ Less

Submitted 29 May, 2023; originally announced May 2023.

Diagnosis of Fast Electron Transport by Coherent Transition Radiation

Authors: Yangchun Liu, Xiaochuan Ning, Dong Wu, Tianyi Liang, Peng Liu, Shujun Liu, Xu Liu, Zhengmao Sheng, Wei Hong, Yuqiu Gu, Xiantu He

Abstract: Transport of fast electron in overdense plasmas is of key importance in high energy density physics. However, it is challenging to diagnose the fast electron transport in experiments. In this article, we study coherent transition radiation (CTR) generated by fast electrons on the back surface of the target by using 2D and 3D first-principle particle-in-cell (PIC) simulations. In our simulations, a… ▽ More Transport of fast electron in overdense plasmas is of key importance in high energy density physics. However, it is challenging to diagnose the fast electron transport in experiments. In this article, we study coherent transition radiation (CTR) generated by fast electrons on the back surface of the target by using 2D and 3D first-principle particle-in-cell (PIC) simulations. In our simulations, aluminium target of 2.7 g/cc is simulated in two different situations by using a newly developed high order implicit PIC code. Comparing realistic simulations containing collision and ionization effects, artificial simulations without taking collision and ionization effects into account significantly underestimate the energy loss of electron beam when transporting in the target, which fail to describe the complete characteristics of CTR produced by electron beam on the back surface of the target. Realistic simulations indicate the diameter of CTR increases when the thickness of the target is increased. This is attributed to synergetic energy losses of high flux fast electrons due to Ohm heatings and colliding drags, which appear quite significant even when the thickness of the solid target only differs by micrometers. Especially, when the diagnosing position is fixed, we find that the intensity distribution of the CTR is also a function of time, with the diameter increased with time. As the diameter of CTR is related to the speed of electrons passing through the back surface of the target, our finding may be used as a new tool to diagnose the electron energy spectra near the surface of solid density plasmas. △ Less

Submitted 11 May, 2023; originally announced May 2023.

Comments: accepted by New Journal of Physics

The JUNO experiment Top Tracker

Authors: JUNO Collaboration, Angel Abusleme, Thomas Adam, Shakeel Ahmad, Rizwan Ahmed, Sebastiano Aiello, Muhammad Akram, Abid Aleem, Tsagkarakis Alexandros, Fengpeng An, Qi An, Giuseppe Andronico, Nikolay Anfimov, Vito Antonelli, Tatiana Antoshkina, Burin Asavapibhop, João Pedro Athayde Marcondes de André, Didier Auguste, Weidong Bai, Nikita Balashov, Wander Baldini, Andrea Barresi, Davide Basilico, Eric Baussan, Marco Bellato , et al. (592 additional authors not shown)

Abstract: The main task of the Top Tracker detector of the neutrino reactor experiment Jiangmen Underground Neutrino Observatory (JUNO) is to reconstruct and extrapolate atmospheric muon tracks down to the central detector. This muon tracker will help to evaluate the contribution of the cosmogenic background to the signal. The Top Tracker is located above JUNO's water Cherenkov Detector and Central Detector… ▽ More The main task of the Top Tracker detector of the neutrino reactor experiment Jiangmen Underground Neutrino Observatory (JUNO) is to reconstruct and extrapolate atmospheric muon tracks down to the central detector. This muon tracker will help to evaluate the contribution of the cosmogenic background to the signal. The Top Tracker is located above JUNO's water Cherenkov Detector and Central Detector, covering about 60% of the surface above them. The JUNO Top Tracker is constituted by the decommissioned OPERA experiment Target Tracker modules. The technology used consists in walls of two planes of plastic scintillator strips, one per transverse direction. Wavelength shifting fibres collect the light signal emitted by the scintillator strips and guide it to both ends where it is read by multianode photomultiplier tubes. Compared to the OPERA Target Tracker, the JUNO Top Tracker uses new electronics able to cope with the high rate produced by the high rock radioactivity compared to the one in Gran Sasso underground laboratory. This paper will present the new electronics and mechanical structure developed for the Top Tracker of JUNO along with its expected performance based on the current detector simulation. △ Less

Submitted 9 March, 2023; originally announced March 2023.

Comments: 20 pages

Journal ref: Nucl.Instrum.Meth.A 1057 (2023) 168680

JUNO sensitivity to $^7$Be, $pep$, and CNO solar neutrinos

Authors: Angel Abusleme, Thomas Adam, Shakeel Ahmad, Rizwan Ahmed, Sebastiano Aiello, Muhammad Akram, Abid Aleem, Tsagkarakis Alexandros, Fengpeng An, Qi An, Giuseppe Andronico, Nikolay Anfimov, Vito Antonelli, Tatiana Antoshkina, Burin Asavapibhop, João Pedro Athayde Marcondes de André, Didier Auguste, Weidong Bai, Nikita Balashov, Wander Baldini, Andrea Barresi, Davide Basilico, Eric Baussan, Marco Bellato, Marco Beretta , et al. (592 additional authors not shown)

Abstract: The Jiangmen Underground Neutrino Observatory (JUNO), the first multi-kton liquid scintillator detector, which is under construction in China, will have a unique potential to perform a real-time measurement of solar neutrinos well below the few MeV threshold typical for Water Cherenkov detectors. JUNO's large target mass and excellent energy resolution are prerequisites for reaching unprecedented… ▽ More The Jiangmen Underground Neutrino Observatory (JUNO), the first multi-kton liquid scintillator detector, which is under construction in China, will have a unique potential to perform a real-time measurement of solar neutrinos well below the few MeV threshold typical for Water Cherenkov detectors. JUNO's large target mass and excellent energy resolution are prerequisites for reaching unprecedented levels of precision. In this paper, we provide estimation of the JUNO sensitivity to 7Be, pep, and CNO solar neutrinos that can be obtained via a spectral analysis above the 0.45 MeV threshold. This study is performed assuming different scenarios of the liquid scintillator radiopurity, ranging from the most opti mistic one corresponding to the radiopurity levels obtained by the Borexino experiment, up to the minimum requirements needed to perform the neutrino mass ordering determination with reactor antineutrinos - the main goal of JUNO. Our study shows that in most scenarios, JUNO will be able to improve the current best measurements on 7Be, pep, and CNO solar neutrino fluxes. We also perform a study on the JUNO capability to detect periodical time variations in the solar neutrino flux, such as the day-night modulation induced by neutrino flavor regeneration in Earth, and the modulations induced by temperature changes driven by helioseismic waves. △ Less

Submitted 7 March, 2023; originally announced March 2023.

Quantum PT-Phase Diagram in a Non-Hermitian Photonic Structure

Authors: Xinchen Zhang, Yun Ma, Qi Liu, Nuo Wang, Yali Jia, Qi Zhang, Zhanqiang Bai, Junxiang Zhang, Qihuang Gong, Ying Gu

Abstract: Photonic structures have an inherent advantage to realize PT-phase transition through modulating the refractive index or gain-loss. However, quantum PT properties of these photonic systems have not been comprehensively studied yet. Here, in a bi-photonic structure with loss and gain simultaneously existing, we analytically obtained the quantum PT-phase diagram under the steady state condition. To… ▽ More Photonic structures have an inherent advantage to realize PT-phase transition through modulating the refractive index or gain-loss. However, quantum PT properties of these photonic systems have not been comprehensively studied yet. Here, in a bi-photonic structure with loss and gain simultaneously existing, we analytically obtained the quantum PT-phase diagram under the steady state condition. To characterize the PT-symmetry or -broken phase, we define an Hermitian exchange operator expressing the exchange between quadrature variables of two modes. If inputting several-photon Fock states into a PT-broken bi-waveguide splitting system, most photons will concentrate in the dominant waveguide with some state distributions. Quantum PT-phase diagram paves the way to the quantum state engineering, quantum interferences, and logic operations in non-Hermitian photonic systems. △ Less

Submitted 3 September, 2023; v1 submitted 28 February, 2023; originally announced March 2023.

Comments: 6 pages, 3 figures

Directional emission of nanoscale chiral sources modified by gap plasmons

Authors: Hai Lin, Te Wen, Jinglin Tang, Lulu Ye, Guanyu Zhang, Weidong Zhang, Ying Gu, Qihuang Gong, Guowei Lu

Abstract: Efficient manipulation of the emission direction of a chiral nanoscale light source is significant for information transmission and on-chip information processing. Here, we propose a scheme to control the directionality of nanoscale chiral light sources based on gap plasmons. The gap plasmon mode formed by a gold nanorod and a silver nanowire realizes the highly directional emission of chiral ligh… ▽ More Efficient manipulation of the emission direction of a chiral nanoscale light source is significant for information transmission and on-chip information processing. Here, we propose a scheme to control the directionality of nanoscale chiral light sources based on gap plasmons. The gap plasmon mode formed by a gold nanorod and a silver nanowire realizes the highly directional emission of chiral light sources. Based on the optical spin-locked light propagation, the hybrid structure enables the directional coupling of chiral emission to achieve a contrast ratio of 99.5%. The emission direction can be manipulated by tailoring the configuration of the structure, such as the positions, aspect ratios, and orientation of the nanorod. Besides, a great local field enhancement exists for highly enhanced emission rates within the nanogap. This chiral nanoscale light source manipulation scheme provides a way for chiral valleytronics and integrated photonics. △ Less

Submitted 8 February, 2023; originally announced February 2023.

Simultaneous magnetic and electric Purcell enhancement in a hybrid metal-dielectric nanostructure

Authors: Lingxiao Shan, Qi Liu, Yun Ma, Yali Jia, Hai Lin, Guowei Lu, Qihuang Gong, Ying Gu

Abstract: Hybrid metal-dielectric structures, which combine the advantages of both metal and dielectric materials, support high-confined but low-loss magnetic and electric resonances under deliberate arrangements. However, their potential for enhancing magnetic emission has not been explored. Here, we study the simultaneous magnetic and electric Purcell enhancement supported by a hybrid structure consisting… ▽ More Hybrid metal-dielectric structures, which combine the advantages of both metal and dielectric materials, support high-confined but low-loss magnetic and electric resonances under deliberate arrangements. However, their potential for enhancing magnetic emission has not been explored. Here, we study the simultaneous magnetic and electric Purcell enhancement supported by a hybrid structure consisting of a dielectric nanoring and a silver nanorod Such a structure enables low Ohmic loss and highly-confined field under the mode hybridization of magnetic resonances on nanoring and electric resonances on nanorod in the optical communication band. So, the 60-fold magnetic Purcell enhancement and 45-fold electric Purcell enhancement can be achieved simultaneously with $>95\%$ of the radiation transmitted to far field. The position of emitter has a several-ten-nanometer tolerance for sufficiently large Purcell enhancement, which brings convenience to experimental fabrications. Moreover, an array formed by this hybrid nanostructure can further enhance the magnetic Purcell factors. The findings provide a possibility to selectively excite the magnetic and electric emission in integrated photon circuits. It may also facilitate brighter magnetic emission sources and light-emitting metasurfaces in a simpler arrangement. △ Less

Submitted 30 January, 2023; originally announced January 2023.

Comments: 10 pages, 6 figures, submitted to Chin. Opt. Lett

An optimized online filter stack spectrometer

Authors: Jia-xing Wen, Ge Ma, Ming-hai Yu, Yu-chi Wu, Yong-hong Yan, Shao-yi Wang, Huai-zhong Gao, Lu-shan Wang, Yu-gang Zhou, Qiang Li, Yue Yang, Fang Tan, Xiao-hui Zhang, Jie Zhang, Wen-bo Mo, Jing-qin Su, Wei-min Zhou, Yu-qiu Gu, Zong-qing Zhao, Ming Zeng

Abstract: The spectrum of laser-plasma-generated X-rays is very important as it can characterize electron dynamics and also be useful for applications, and nowadays with the forthcoming high-repetition-rate laser-plasma experiments, there is a raising demand for online diagnosis for the X-ray spectrum. In this paper, scintillators and silicon PIN diodes are used to build a wideband online filter stack spect… ▽ More The spectrum of laser-plasma-generated X-rays is very important as it can characterize electron dynamics and also be useful for applications, and nowadays with the forthcoming high-repetition-rate laser-plasma experiments, there is a raising demand for online diagnosis for the X-ray spectrum. In this paper, scintillators and silicon PIN diodes are used to build a wideband online filter stack spectrometer. The genetic algorithm is used to optimize the arrangements of the X-ray sensors and filters by minimizing the condition number of the response matrix, thus the unfolding error can be significantly decreased according to the numerical experiments. The detector responses are quantitatively calibrated by irradiating the scintillator and PIN diode using different nuclides and comparing the measured gamma-ray peaks. Finally, a 15-channel spectrometer prototype has been implemented. The X-ray detector, front-end electronics, and back-end electronics are integrated into the prototype, and the prototype can determine the spectrum with 1 kHz repetition rates. △ Less

Submitted 29 January, 2023; originally announced January 2023.

Performance of the CMS High Granularity Calorimeter prototype to charged pion beams of 20$-$300 GeV/c

Authors: B. Acar, G. Adamov, C. Adloff, S. Afanasiev, N. Akchurin, B. Akgün, M. Alhusseini, J. Alison, J. P. Figueiredo de sa Sousa de Almeida, P. G. Dias de Almeida, A. Alpana, M. Alyari, I. Andreev, U. Aras, P. Aspell, I. O. Atakisi, O. Bach, A. Baden, G. Bakas, A. Bakshi, S. Banerjee, P. DeBarbaro, P. Bargassa, D. Barney, F. Beaudette , et al. (435 additional authors not shown)

Abstract: The upgrade of the CMS experiment for the high luminosity operation of the LHC comprises the replacement of the current endcap calorimeter by a high granularity sampling calorimeter (HGCAL). The electromagnetic section of the HGCAL is based on silicon sensors interspersed between lead and copper (or copper tungsten) absorbers. The hadronic section uses layers of stainless steel as an absorbing med… ▽ More The upgrade of the CMS experiment for the high luminosity operation of the LHC comprises the replacement of the current endcap calorimeter by a high granularity sampling calorimeter (HGCAL). The electromagnetic section of the HGCAL is based on silicon sensors interspersed between lead and copper (or copper tungsten) absorbers. The hadronic section uses layers of stainless steel as an absorbing medium and silicon sensors as an active medium in the regions of high radiation exposure, and scintillator tiles directly readout by silicon photomultipliers in the remaining regions. As part of the development of the detector and its readout electronic components, a section of a silicon-based HGCAL prototype detector along with a section of the CALICE AHCAL prototype was exposed to muons, electrons and charged pions in beam test experiments at the H2 beamline at the CERN SPS in October 2018. The AHCAL uses the same technology as foreseen for the HGCAL but with much finer longitudinal segmentation. The performance of the calorimeters in terms of energy response and resolution, longitudinal and transverse shower profiles is studied using negatively charged pions, and is compared to GEANT4 predictions. This is the first report summarizing results of hadronic showers measured by the HGCAL prototype using beam test data. △ Less

Submitted 27 May, 2023; v1 submitted 9 November, 2022; originally announced November 2022.

Comments: Accepted for publication by JINST

21st Century Global and Regional Surface Temperature Projections

Authors: Nicole Ma, Jonathan H. Jiang, Kennard Hou, Yun Lin, Trung Vu, Philip E. Rosen, Yu Gu, Kristen A. Fahy

Abstract: Many regions across the globe broke their surface temperature records in recent years, further sparking concerns about the impending arrival of "tipping points" later in the 21st century. This study analyzes observed global surface temperature trends in three target latitudinal regions: the Arctic Circle, the Tropics, and the Antarctic Circle. We show that global warming is accelerating unevenly a… ▽ More Many regions across the globe broke their surface temperature records in recent years, further sparking concerns about the impending arrival of "tipping points" later in the 21st century. This study analyzes observed global surface temperature trends in three target latitudinal regions: the Arctic Circle, the Tropics, and the Antarctic Circle. We show that global warming is accelerating unevenly across the planet, with the Arctic warming at approximately three times the average rate of our world. We further analyzed the reliability of latitude-dependent surface temperature simulations from a suite of Coupled Model Intercomparison Project Phase 6 models and their multi-model mean. We found that GISS-E2-1-G and FGOALS-g3 were the best-performing models based on their statistical abilities to reproduce observational, latitude-dependent data. Surface temperatures were projected from ensemble simulations of the Shared Socioeconomic Pathway 2-4.5 (SSP2-4.5). We estimate when the climate will warm by 1.5, 2.0, and 2.5 degrees C relative to the preindustrial period, globally and regionally. GISS-E2-1-G projects that global surface temperature anomalies would reach 1.5, 2.0, and 2.5 degrees C in 2024 (+/-1.34), 2039 (+/-2.83), and 2057 (+/-5.03) respectively, while FGOALS-g3 predicts these "tipping points" would arrive in 2024 (+/-2.50), 2054 (+/-7.90), and 2087 (+/-10.55) respectively. Our results reaffirm a dramatic, upward trend in projected climate warming acceleration, with upward concavity in 21st century projections of the Arctic, which could lead to catastrophic consequences across the Earth. Further studies are necessary to determine the most efficient solutions to reduce global warming acceleration and maintain a low SSP, both globally and regionally. △ Less

Submitted 20 November, 2022; v1 submitted 6 October, 2022; originally announced October 2022.

Journal ref: Earth and Space Science, 9, 2022

Segment Linking: A Highly Parallelizable Track Reconstruction Algorithm for HL-LHC

Authors: Philip Chang, Peter Elmer, Yanxi Gu, Vyacheslav Krutelyov, Gavin Niendorf, Michael Reid, Balaji Venkat Sathia Narayanan, Matevž Tadel, Emmanouil Vourliotis, Bei Wang, Peter Wittich, Avraham Yagil

Abstract: The High Luminosity upgrade of the Large Hadron Collider (HL-LHC) will produce particle collisions with up to 200 simultaneous proton-proton interactions. These unprecedented conditions will create a combinatorial complexity for charged-particle track reconstruction that demands a computational cost that is expected to surpass the projected computing budget using conventional CPUs. Motivated by th… ▽ More The High Luminosity upgrade of the Large Hadron Collider (HL-LHC) will produce particle collisions with up to 200 simultaneous proton-proton interactions. These unprecedented conditions will create a combinatorial complexity for charged-particle track reconstruction that demands a computational cost that is expected to surpass the projected computing budget using conventional CPUs. Motivated by this and taking into account the prevalence of heterogeneous computing in cutting-edge High Performance Computing centers, we propose an efficient, fast and highly parallelizable bottom-up approach to track reconstruction for the HL-LHC, along with an associated implementation on GPUs, in the context of the Phase 2 CMS outer tracker. Our algorithm, called Segment Linking (or Line Segment Tracking), takes advantage of localized track stub creation, combining individual stubs to progressively form higher level objects that are subject to kinematical and geometrical requirements compatible with genuine physics tracks. The local nature of the algorithm makes it ideal for parallelization under the Single Instruction, Multiple Data paradigm, as hundreds of objects can be built simultaneously. The computing and physics performance of the algorithm has been tested on an NVIDIA Tesla V100 GPU, already yielding efficiency and timing measurements that are on par with the latest, multi-CPU versions of existing CMS tracking algorithms. △ Less

Submitted 27 September, 2022; originally announced September 2022.

Comments: Contribution to the HEP 2022 - 39th Conference on Recent Developments in High Energy Physics and Cosmology, 15-18 June 2022, Thessaloniki, Greece

Journal ref: 2022 J. Phys.: Conf. Ser. 2375 012005

Analyses of Flight Time During Solar Proton Events and Solar Flares

Authors: X. H. Xu, Y. Wang, F. S. Wei, X. S. Feng, M. H. Bo, H. W. Tang, D. S. Wang, B. Lei, B. Y. Wang, P. B. Zuo, C. W. Jiang, X. J. Xu, Z. L. Zhou, Z. Li, P. Zou, L. D. Wang, Y. X. Gu, Y. L. Chen, W. Y. Zhang, P. Sun

Abstract: Analyzing the effects of space weather on aviation is a new and developing topic. It has been commonly accepted that the flight time of the polar flights may increase during solar proton events because the flights have to change their route to avoid the high-energy particles. However, apart from such phenomenon, researches related to the flight time during space weather events is very rare. Based… ▽ More Analyzing the effects of space weather on aviation is a new and developing topic. It has been commonly accepted that the flight time of the polar flights may increase during solar proton events because the flights have to change their route to avoid the high-energy particles. However, apart from such phenomenon, researches related to the flight time during space weather events is very rare. Based on the analyses of 39 representative international air routes around westerlies, it is found that 97.44% (94.87%) of the commercial airplanes on the westbound (eastbound) air routes reveal shorter (longer) flight time during solar proton events compared to those during quiet periods, and the averaged magnitude of change in flight time is ~10 min or 0.21%-4.17% of the total flight durations. Comparative investigations reassure the certainty of such phenomenon that the directional differences in flight time are still incontrovertible regardless of over-land routes (China-Europe) or over-sea routes (China-Western America). Further analyses suggest that the solar proton events associated atmospheric heating will change the flight durations by weakening certain atmospheric circulations, such as the polar jet stream. While the polar jet stream will not be obviously altered during solar flares so that the directional differences in flight time are not found. Besides the conventional space weather effects already known, this paper is the first report that indicates a distinct new scenario of how the solar proton events affect flight time. These analyses are also important for aviation since our discoveries could help the airways optimize the air routes to save passenger time costs, reduce fuel costs and even contribute to the global warming issues. △ Less

Submitted 15 September, 2022; originally announced September 2022.

Comments: submitted to Scientific Reports

Transport dynamics study of laser-accelerated proton beams and design of double achromatic beam translation system

Authors: J. G. Zhu, H. Y. Lu, Y. Zhao, M. F. Lai, Y. L. Gu, S. X. Xu, C. T. Zhou

Abstract: Proton beams generated from laser acceleration show merit for their unique spatial (micron-size) and temporal (picosecond) properties, which make them desirable for many potential applications. However, the large energy spread and divergence angle make it difficult to maintain these beam properties after delivery. This hinders the wide application of laser acceleration. In this paper, we design a… ▽ More Proton beams generated from laser acceleration show merit for their unique spatial (micron-size) and temporal (picosecond) properties, which make them desirable for many potential applications. However, the large energy spread and divergence angle make it difficult to maintain these beam properties after delivery. This hinders the wide application of laser acceleration. In this paper, we design a double achromatic beam translation system (DABTS), based on weak-focusing magnets, to realize achromatic transmission in both the horizontal and vertical directions, and compress the bunch length of the delivered proton beam at the same time. We make use of fringe angles and special steering magnets to effectively reduce the influence of chromatic aberrations and high-order nonlinear terms and realize close to ideal point-to-point optics. We believe this work contributes to the ongoing effort to apply laser accelerators to a variety of fields. △ Less

Submitted 2 September, 2022; originally announced September 2022.

Light-driven C-H bond activation mediated by 2D transition metal dichalcogenides

Authors: Jingang Li, Di Zhang, Zhongyuan Guo, Xi Jiang, Jonathan M. Larson, Haoyue Zhu, Tianyi Zhang, Yuqian Gu, Brian Blankenship, Min Chen, Zilong Wu, Suichu Huang, Robert Kostecki, Andrew M. Minor, Costas P. Grigoropoulos, Deji Akinwande, Mauricio Terrones, Joan M. Redwing, Hao Li, Yuebing Zheng

Abstract: C-H bond activation enables the facile synthesis of new chemicals. While C-H activation in short-chain alkanes has been widely investigated, it remains largely unexplored for long-chain organic molecules. Here, we report light-driven C-H activation in complex organic materials mediated by 2D transition metal dichalcogenides (TMDCs) and the resultant solid-state synthesis of luminescent carbon dots… ▽ More C-H bond activation enables the facile synthesis of new chemicals. While C-H activation in short-chain alkanes has been widely investigated, it remains largely unexplored for long-chain organic molecules. Here, we report light-driven C-H activation in complex organic materials mediated by 2D transition metal dichalcogenides (TMDCs) and the resultant solid-state synthesis of luminescent carbon dots in a spatially-resolved fashion. We unravel the efficient H adsorption and a lowered energy barrier of C-C coupling mediated by 2D TMDCs to promote C-H activation. Our results shed light on 2D materials for C-H activation in organic compounds for applications in organic chemistry, environmental remediation, and photonic materials. △ Less

Submitted 15 November, 2023; v1 submitted 16 August, 2022; originally announced August 2022.

Journal ref: Nature Communications, 2024, 15, 5546

Target density effects on charge tansfer of laser-accelerated carbon ions in dense plasma

Authors: Jieru Ren, Bubo Ma, Lirong Liu, Wenqing Wei, Benzheng Chen, Shizheng Zhang, Hao Xu, Zhongmin Hu, Fangfang Li, Xing Wang, Shuai Yin, Jianhua Feng, Xianming Zhou, Yifang Gao, Yuan Li, Xiaohua Shi, Jianxing Li, Xueguang Ren, Zhongfeng Xu, Zhigang Deng, Wei Qi, Shaoyi Wang, Quanping Fan, Bo Cui, Weiwu Wang , et al. (17 additional authors not shown)

Abstract: We report on charge state measurements of laser-accelerated carbon ions in the energy range of several MeV penetrating a dense partially ionized plasma. The plasma was generated by irradiation of a foam target with laser-induced hohlraum radiation in the soft X-ray regime. We used the tri-cellulose acetate (C$_{9}$H$_{16}$O$_{8}$) foam of 2 mg/cm$^{-3}$ density, and $1$-mm interaction length as ta… ▽ More We report on charge state measurements of laser-accelerated carbon ions in the energy range of several MeV penetrating a dense partially ionized plasma. The plasma was generated by irradiation of a foam target with laser-induced hohlraum radiation in the soft X-ray regime. We used the tri-cellulose acetate (C$_{9}$H$_{16}$O$_{8}$) foam of 2 mg/cm$^{-3}$ density, and $1$-mm interaction length as target material. This kind of plasma is advantageous for high-precision measurements, due to good uniformity and long lifetime compared to the ion pulse length and the interaction duration. The plasma parameters were diagnosed to be T$_{e}$=17 eV and n$_{e}$=4 $\times$ 10$^{20}$ cm$^{-3}$. The average charge states passing through the plasma were observed to be higher than those predicted by the commonly-used semiempirical formula. Through solving the rate equations, we attribute the enhancement to the target density effects which will increase the ionization rates on one hand and reduce the electron capture rates on the other hand. In previsous measurement with partially ionized plasma from gas discharge and z-pinch to laser direct irradiation, no target density effects were ever demonstrated. For the first time, we were able to experimentally prove that target density effects start to play a significant role in plasma near the critical density of Nd-Glass laser radiation. The finding is important for heavy ion beam driven high energy density physics and fast ignitions. △ Less

Submitted 1 August, 2022; originally announced August 2022.

Comments: 7 pages, 4 figures, 35 conferences

Gain-gain and gain-lossless PT-symmetry broken from PT-phase diagram

Authors: Qi Zhang, Yun Ma, Qi Liu, Xinchen Zhang, Yali Jia, Limin Tong, Qihuang Gong, Ying Gu

Abstract: Parity-time (PT) symmetry and broken in micro/nano photonic structures have been investigated extensively as they bring new opportunities to control the flow of light based on non-Hermitian optics. Previous studies have focused on the situations of PT-symmetry broken in loss-loss or gain-loss coupling systems. Here, we theoretically predict the gain-gain and gain-lossless PT-broken from phase diag… ▽ More Parity-time (PT) symmetry and broken in micro/nano photonic structures have been investigated extensively as they bring new opportunities to control the flow of light based on non-Hermitian optics. Previous studies have focused on the situations of PT-symmetry broken in loss-loss or gain-loss coupling systems. Here, we theoretically predict the gain-gain and gain-lossless PT-broken from phase diagram, where the boundaries between PT-symmetry and PT-broken can be clearly defined in the full-parameter space including gain, lossless and loss. For specific micro/nano photonic structures, such as coupled waveguides, we give the transmission matrices of each phase space, which can be used for beam splitting. Taking coupled waveguides as an example, we obtain periodic energy exchange in PT-symmetry phase and exponential gain or loss in PT-broken phase, which are consistent with the phase diagram. The scenario giving a full view of PT-symmetry or broken, will not only deepen the understanding of fundamental physics, but also will promote the breakthrough of photonic applications like optical routers and beam splitters. △ Less

Submitted 18 July, 2022; originally announced July 2022.

Line Segment Tracking in the HL-LHC

Authors: Gavin Niendorf, Tres Reid, Peter Wittich, Peter Elmer, Bei Wang, Philip Chang, Yanxi Gu, Vyacheslav Krutelyov, Balaji Venkat Sathia Narayanan, Matevz Tadel, Emmanouil Vourliotis, Avi Yagil

Abstract: The major challenge posed by the high instantaneous luminosity in the High Luminosity LHC (HL-LHC) motivates efficient and fast reconstruction of charged particle tracks in a high pile-up environment. While there have been efforts to use modern techniques like vectorization to improve the existing classic Kalman Filter based reconstruction algorithms, Line Segment Tracking takes a fundamentally di… ▽ More The major challenge posed by the high instantaneous luminosity in the High Luminosity LHC (HL-LHC) motivates efficient and fast reconstruction of charged particle tracks in a high pile-up environment. While there have been efforts to use modern techniques like vectorization to improve the existing classic Kalman Filter based reconstruction algorithms, Line Segment Tracking takes a fundamentally different approach by doing a bottom-up reconstruction of tracks. Small track stubs from adjoining detector regions are constructed, and then these track stubs that are consistent with typical track trajectories are successively linked. Since the production of these track stubs is localized, they can be made in parallel, which lends way into using architectures like GPUs and multi-CPUs to take advantage of the parallelism. The algorithm is implemented in the context of the CMS Phase-2 Tracker and runs on NVIDIA Tesla V100 GPUs. Good physics and timing performance has been obtained, and stepping stones for the future are elaborated. △ Less

Submitted 28 September, 2022; v1 submitted 17 July, 2022; originally announced July 2022.

Comments: Connecting the Dots Workshop (CTD 2022) v2 : Implemented referee comments from internal review

Prospects for Detecting the Diffuse Supernova Neutrino Background with JUNO

Authors: JUNO Collaboration, Angel Abusleme, Thomas Adam, Shakeel Ahmad, Rizwan Ahmed, Sebastiano Aiello, Muhammad Akram, Fengpeng An, Qi An, Giuseppe Andronico, Nikolay Anfimov, Vito Antonelli, Tatiana Antoshkina, Burin Asavapibhop, João Pedro Athayde Marcondes de André, Didier Auguste, Nikita Balashov, Wander Baldini, Andrea Barresi, Davide Basilico, Eric Baussan, Marco Bellato, Antonio Bergnoli, Thilo Birkenfeld, Sylvie Blin , et al. (577 additional authors not shown)

Abstract: We present the detection potential for the diffuse supernova neutrino background (DSNB) at the Jiangmen Underground Neutrino Observatory (JUNO), using the inverse-beta-decay (IBD) detection channel on free protons. We employ the latest information on the DSNB flux predictions, and investigate in detail the background and its reduction for the DSNB search at JUNO. The atmospheric neutrino induced n… ▽ More We present the detection potential for the diffuse supernova neutrino background (DSNB) at the Jiangmen Underground Neutrino Observatory (JUNO), using the inverse-beta-decay (IBD) detection channel on free protons. We employ the latest information on the DSNB flux predictions, and investigate in detail the background and its reduction for the DSNB search at JUNO. The atmospheric neutrino induced neutral current (NC) background turns out to be the most critical background, whose uncertainty is carefully evaluated from both the spread of model predictions and an envisaged \textit{in situ} measurement. We also make a careful study on the background suppression with the pulse shape discrimination (PSD) and triple coincidence (TC) cuts. With latest DSNB signal predictions, more realistic background evaluation and PSD efficiency optimization, and additional TC cut, JUNO can reach the significance of 3$σ$ for 3 years of data taking, and achieve better than 5$σ$ after 10 years for a reference DSNB model. In the pessimistic scenario of non-observation, JUNO would strongly improve the limits and exclude a significant region of the model parameter space. △ Less

Submitted 13 October, 2022; v1 submitted 18 May, 2022; originally announced May 2022.

Comments: 29 pages, 11 figures, final published version in JCAP

Journal ref: JCAP 10 (2022) 033

Mass Testing and Characterization of 20-inch PMTs for JUNO

Authors: Angel Abusleme, Thomas Adam, Shakeel Ahmad, Rizwan Ahmed, Sebastiano Aiello, Muhammad Akram, Abid Aleem, Tsagkarakis Alexandros, Fengpeng An, Qi An, Giuseppe Andronico, Nikolay Anfimov, Vito Antonelli, Tatiana Antoshkina, Burin Asavapibhop, Joao Pedro Athayde Marcondes de Andre, Didier Auguste, Weidong Bai, Nikita Balashov, Wander Baldini, Andrea Barresi, Davide Basilico, Eric Baussan, Marco Bellato, Antonio Bergnoli , et al. (541 additional authors not shown)

Abstract: Main goal of the JUNO experiment is to determine the neutrino mass ordering using a 20kt liquid-scintillator detector. Its key feature is an excellent energy resolution of at least 3 % at 1 MeV, for which its instruments need to meet a certain quality and thus have to be fully characterized. More than 20,000 20-inch PMTs have been received and assessed by JUNO after a detailed testing program whic… ▽ More Main goal of the JUNO experiment is to determine the neutrino mass ordering using a 20kt liquid-scintillator detector. Its key feature is an excellent energy resolution of at least 3 % at 1 MeV, for which its instruments need to meet a certain quality and thus have to be fully characterized. More than 20,000 20-inch PMTs have been received and assessed by JUNO after a detailed testing program which began in 2017 and elapsed for about four years. Based on this mass characterization and a set of specific requirements, a good quality of all accepted PMTs could be ascertained. This paper presents the performed testing procedure with the designed testing systems as well as the statistical characteristics of all 20-inch PMTs intended to be used in the JUNO experiment, covering more than fifteen performance parameters including the photocathode uniformity. This constitutes the largest sample of 20-inch PMTs ever produced and studied in detail to date, i.e. 15,000 of the newly developed 20-inch MCP-PMTs from Northern Night Vision Technology Co. (NNVT) and 5,000 of dynode PMTs from Hamamatsu Photonics K. K.(HPK). △ Less

Submitted 17 September, 2022; v1 submitted 17 May, 2022; originally announced May 2022.

$2^{1296}$ Exponentially Complex Quantum Many-Body Simulation via Scalable Deep Learning Method

Authors: Xiao Liang, Mingfan Li, Qian Xiao, Hong An, Lixin He, Xuncheng Zhao, Junshi Chen, Chao Yang, Fei Wang, Hong Qian, Li Shen, Dongning Jia, Yongjian Gu, Xin Liu, Zhiqiang Wei

Abstract: For decades, people are developing efficient numerical methods for solving the challenging quantum many-body problem, whose Hilbert space grows exponentially with the size of the problem. However, this journey is far from over, as previous methods all have serious limitations. The recently developed deep learning methods provide a very promising new route to solve the long-standing quantum many-bo… ▽ More For decades, people are developing efficient numerical methods for solving the challenging quantum many-body problem, whose Hilbert space grows exponentially with the size of the problem. However, this journey is far from over, as previous methods all have serious limitations. The recently developed deep learning methods provide a very promising new route to solve the long-standing quantum many-body problems. We report that a deep learning based simulation protocol can achieve the solution with state-of-the-art precision in the Hilbert space as large as $2^{1296}$ for spin system and $3^{144}$ for fermion system , using a HPC-AI hybrid framework on the new Sunway supercomputer. With highly scalability up to 40 million heterogeneous cores, our applications have measured 94% weak scaling efficiency and 72% strong scaling efficiency. The accomplishment of this work opens the door to simulate spin models and Fermion models on unprecedented lattice size with extreme high precision. △ Less

Submitted 16 April, 2022; originally announced April 2022.

Comments: Massive ground state optimizations of CNN-based wave-functions for $J1$-$J2$ model and $t$-$J$ model carried out on a heterogeneous cores supercomputer

Journal ref: 2023 Mach. Learn.: Sci. Technol. 4 015035

Optimizing Ghost Imaging via Analysis and Design of Speckle Patterns

Authors: Xinjian Zhang, Siyuan Song, Xiaoping Ma, Haonan Zhang, Lei Gai, Yongjian Gu, Wendong Li

Abstract: We study the influence rules of the speckle size of light source on ghost imaging, and propose a new type of speckle patterns to improve the quality of ghost imaging. The results show that the image quality will first increase and then decrease with the increase of the speckle size, and there is an optimal speckle size for a specific object. Moreover, by using the random distribution of speckle po… ▽ More We study the influence rules of the speckle size of light source on ghost imaging, and propose a new type of speckle patterns to improve the quality of ghost imaging. The results show that the image quality will first increase and then decrease with the increase of the speckle size, and there is an optimal speckle size for a specific object. Moreover, by using the random distribution of speckle positions, a new type of displacement speckle patterns is designed, and the imaging quality is better than that of the random speckle patterns. These results are of great significances for finding the best speckle patterns suitable for detecting targets, which further promotes the practical applications of ghost imaging. △ Less

Submitted 10 March, 2022; originally announced March 2022.

Practical underwater quantum key distribution based on decoy-state BB84 protocol

Authors: Shanchuan Dong, Yonghe Yu, Shangshuai Zheng, Qiming Zhu, Lei Gai, Wendong Li, Yongjian Gu

Abstract: Polarization encoding quantum key distribution has been proven to be a reliable method to build a secure communication system. It has already been used in inter-city fiber channel and near-earth atmosphere channel, leaving underwater channel the last barrier to conquer. Here we demonstrate a decoy-state BB84 quantum key distribution system over a water channel with a compact system design for futu… ▽ More Polarization encoding quantum key distribution has been proven to be a reliable method to build a secure communication system. It has already been used in inter-city fiber channel and near-earth atmosphere channel, leaving underwater channel the last barrier to conquer. Here we demonstrate a decoy-state BB84 quantum key distribution system over a water channel with a compact system design for future experiments in the ocean. In the system, a multiple-intensity modulated laser module is designed to produce the light pulses of quantum states, including signal state, decoy state and vacuum state. The classical communication and synchronization are realized by wireless optical transmission. Multiple filtering techniques and wavelength division multiplexing are further used to avoid crosstalk of different light. We test the performance of the system and obtain a final key rate of 245.6 bps with an average QBER of 1.91% over a 2.4m water channel, in which the channel attenuation is 16.35dB. Numerical simulation shows that the system can tolerate up to 21.7dB total channel loss and can still generate secure keys in 277.9m Jelov type 1 ocean channel. △ Less

Submitted 9 March, 2022; originally announced March 2022.

Ten more times precision improved method for surface roughness estimation with weak measurement

Authors: Hui-Chao Qu, Ya Xiao, Xin-Hong Han, Shan-Chuan Dong, Yong-Jian Gu

Abstract: High-precision surface roughness estimation plays an important role in many applications. However, the classical estimating methods are limited by shot noise and only can achieve the precision of 0.1 nm with white light interferometer. Here, we propose two weak measurement schemes to estimate surface roughness through spectrum analysis and intensity analysis. The estimating precision with spectrum… ▽ More High-precision surface roughness estimation plays an important role in many applications. However, the classical estimating methods are limited by shot noise and only can achieve the precision of 0.1 nm with white light interferometer. Here, we propose two weak measurement schemes to estimate surface roughness through spectrum analysis and intensity analysis. The estimating precision with spectrum analysis is about $10 ^{-5}$ nm by using a currently available spectrometer with the resolution of $Δλ= 0.04$ pm and the corresponding sensitivity is better than 0.1 THz/nm. And the precision and sensitivity of the light intensity analysis scheme achieve as high as 0.07 nm and 1/nm, respectively. By introducing a modulated phase, we show that the sensitivity and precision achieved in our schemes can be effectively retained in a wider dynamic range. We further provide the experimental design of the surface profiler based on our schemes. It simultaneously meets the requirements of high precision, high sensitivity, and wide measurement range, making it to be a promising practical tool. △ Less

Submitted 28 February, 2022; originally announced February 2022.

Comments: 7 pages, 6 figures

100-kT Magnetic field generation using paisley targets by femtosecond laser-plasma interactions

Authors: Myles Allen Zosa, Yan-Jun Gu, Masakatsu Murakami

Abstract: A target using a paisley pattern generates 100-kT-level magnetic fields. Laser irradiation induces local charge separation on the target, which creates surface currents along the concave surface, generating a magnetic field. For a laser intensity of $10^{21}$ W/cm$^2$, the target generates a 150-kT magnetic field. We developed a simple model to describe the magnetic field as a function of laser in… ▽ More A target using a paisley pattern generates 100-kT-level magnetic fields. Laser irradiation induces local charge separation on the target, which creates surface currents along the concave surface, generating a magnetic field. For a laser intensity of $10^{21}$ W/cm$^2$, the target generates a 150-kT magnetic field. We developed a simple model to describe the magnetic field as a function of laser intensity and target radius. A double paisley configuration extends the lifetime of the magnetic field to the picosecond scale. The paisley design generates comparable results even if it is simplified. Thus, it is a robust and modular target suitable for magnetic field applications such as 100-kT magnetic field generation and magnetic reconnection. △ Less

Submitted 31 January, 2022; originally announced February 2022.

Dynamic Stabilization of Water Bottles

Authors: Yanwen Gu, Yunzhou Bai, Yuxi Xin, Lintao Xiao, Sihui Wang, Hanchao Sun

Abstract: The motion of water filled bottles is studied when it is thrown into the air and falls back to the floor, including the possibilities of an upright landing or rolling down before it finally reaches static state. When dealing with the process after throwing a water bottle, the free falling (bottle falls without initial angular velocity) and flipping (bottle falls with initial angular velocity) are… ▽ More The motion of water filled bottles is studied when it is thrown into the air and falls back to the floor, including the possibilities of an upright landing or rolling down before it finally reaches static state. When dealing with the process after throwing a water bottle, the free falling (bottle falls without initial angular velocity) and flipping (bottle falls with initial angular velocity) are considered. In theory, the physical principles behind the motion are analyzed. In addition, the impacts of initial angle, linear velocity, angular velocity and the water amount on the uprightness of the bottle are discussed. In experiment of throwing bottle, we changed the water amount, angular velocity, and releasing height, and examined the impacts of these factors. The results suggest that a certain amount of water and spinning result in higher possibility of upright landing. When dealing with rolling bottle, theoretically we build the bottle-and-bead model to describe the coupled motion of water and the bottle. Analytical solutions are obtained for small amplitude and the numerical solution can be done in a general situation. In the experiment of rolling bottle, we firstly verified the theoretical model, and then addressed the impact of initial conditions and water amount on the motion patterns of the bottle. △ Less

Submitted 17 December, 2021; originally announced December 2021.

Comments: 48 pages

Response of a CMS HGCAL silicon-pad electromagnetic calorimeter prototype to 20-300 GeV positrons

Authors: B. Acar, G. Adamov, C. Adloff, S. Afanasiev, N. Akchurin, B. Akgün, F. Alam Khan, M. Alhusseini, J. Alison, A. Alpana, G. Altopp, M. Alyari, S. An, S. Anagul, I. Andreev, P. Aspell, I. O. Atakisi, O. Bach, A. Baden, G. Bakas, A. Bakshi, S. Bannerjee, P. Bargassa, D. Barney, F. Beaudette , et al. (364 additional authors not shown)

Abstract: The Compact Muon Solenoid Collaboration is designing a new high-granularity endcap calorimeter, HGCAL, to be installed later this decade. As part of this development work, a prototype system was built, with an electromagnetic section consisting of 14 double-sided structures, providing 28 sampling layers. Each sampling layer has an hexagonal module, where a multipad large-area silicon sensor is glu… ▽ More The Compact Muon Solenoid Collaboration is designing a new high-granularity endcap calorimeter, HGCAL, to be installed later this decade. As part of this development work, a prototype system was built, with an electromagnetic section consisting of 14 double-sided structures, providing 28 sampling layers. Each sampling layer has an hexagonal module, where a multipad large-area silicon sensor is glued between an electronics circuit board and a metal baseplate. The sensor pads of approximately 1 cm$^2$ are wire-bonded to the circuit board and are readout by custom integrated circuits. The prototype was extensively tested with beams at CERN's Super Proton Synchrotron in 2018. Based on the data collected with beams of positrons, with energies ranging from 20 to 300 GeV, measurements of the energy resolution and linearity, the position and angular resolutions, and the shower shapes are presented and compared to a detailed Geant4 simulation. △ Less

Submitted 31 March, 2022; v1 submitted 12 November, 2021; originally announced November 2021.

Giant electro-optic effect in chiral topological semimetal RhSi

Authors: Zhi Li, Yuewen Gao, Yu Gu, Shengli Zhang, Toshiaki Iitaka, W. M. Liu

Abstract: We studied the linear electro-optic effect of chiral topological semimetal RhSi which is characterized by high-fold chiral fermions separated in energy space. We identify that the general second order conductivity $σ^{(2)}_{xyz}(ω=ω_{1}+ω_{2};ω_{1},ω_{2})$ includes a real symmetric component and an imaginary antisymmetric component, which are from the inter-band shift and intra-band injection curr… ▽ More We studied the linear electro-optic effect of chiral topological semimetal RhSi which is characterized by high-fold chiral fermions separated in energy space. We identify that the general second order conductivity $σ^{(2)}_{xyz}(ω=ω_{1}+ω_{2};ω_{1},ω_{2})$ includes a real symmetric component and an imaginary antisymmetric component, which are from the inter-band shift and intra-band injection current with frequency $ω$, respectively. The $σ^{(2)}_{xyz}$ is significantly enhanced by the high electron velocity and nontrivial band topology of chiral fermion, and modifies the phase velocity of light wave. We also predict that the electro-optic coefficient $χ_{xyz}^{(2)}(ω;ω,0)$ of chiral crystal RhSi is about 7000 pm/V at photon energy 0.01 eV and 1.1 eV, which is about 200 times that of widely used LiNbO$_{3}$ crystal. The giant electro-optic coefficient renders a relatively low half-wave voltage in order of hundreds volt, and demonstrates potential application as electro-optic crystals for the wavelength in the second telecom window of optical fiber communications. △ Less

Submitted 22 October, 2021; originally announced October 2021.

Comments: 6 pages, 3 figure

Observation of high efficiency Betatron radiation from femtosecond petawatt laser irradiated near critical plasmas

Authors: J. H. Tan, Y. F. Li, D. Z. Li, J. Feng, Y. J. Li, W. J. Zhou, Y. H. Yan, Z. M. Zhang, B. L. Zhang, J. G. Wang, Y. Q. Gu, Y. T. Li, L. M. Chen

Abstract: We present an experimental demonstration of high conversion efficiency Betatron x-ray radiation from petawatt laser irradiated near critical plasmas. Direct laser acceleration serves as the dominant regime when laser pulse of ~5e20 W/cm2 intensity is focused into plasmas with electron density of 3e20 /cm3. Electron beam with a charge of ~35 nC is accelerated up to a maximum energy of 70 MeV and em… ▽ More We present an experimental demonstration of high conversion efficiency Betatron x-ray radiation from petawatt laser irradiated near critical plasmas. Direct laser acceleration serves as the dominant regime when laser pulse of ~5e20 W/cm2 intensity is focused into plasmas with electron density of 3e20 /cm3. Electron beam with a charge of ~35 nC is accelerated up to a maximum energy of 70 MeV and emit x-rays when oscillating in the laser field. The deduced energy conversion efficiency from laser to x-rays is up to 1e-4, orders of magnitude higher than other betatron regimes. Enhancement of acceleration and radiation with sharp plasma density boundary is also obtained and further interpretated with 2D particle-in-cell simulations. △ Less

Submitted 25 September, 2021; originally announced September 2021.

Comments: 5 pages, 5 figures

Radioactivity control strategy for the JUNO detector

Authors: JUNO collaboration, Angel Abusleme, Thomas Adam, Shakeel Ahmad, Rizwan Ahmed, Sebastiano Aiello, Muhammad Akram, Fengpeng An, Qi An, Giuseppe Andronico, Nikolay Anfimov, Vito Antonelli, Tatiana Antoshkina, Burin Asavapibhop, João Pedro Athayde Marcondes de André, Didier Auguste, Andrej Babic, Wander Baldini, Andrea Barresi, Davide Basilico, Eric Baussan, Marco Bellato, Antonio Bergnoli, Thilo Birkenfeld, Sylvie Blin , et al. (578 additional authors not shown)

Abstract: JUNO is a massive liquid scintillator detector with a primary scientific goal of determining the neutrino mass ordering by studying the oscillated anti-neutrino flux coming from two nuclear power plants at 53 km distance. The expected signal anti-neutrino interaction rate is only 60 counts per day, therefore a careful control of the background sources due to radioactivity is critical. In particula… ▽ More JUNO is a massive liquid scintillator detector with a primary scientific goal of determining the neutrino mass ordering by studying the oscillated anti-neutrino flux coming from two nuclear power plants at 53 km distance. The expected signal anti-neutrino interaction rate is only 60 counts per day, therefore a careful control of the background sources due to radioactivity is critical. In particular, natural radioactivity present in all materials and in the environment represents a serious issue that could impair the sensitivity of the experiment if appropriate countermeasures were not foreseen. In this paper we discuss the background reduction strategies undertaken by the JUNO collaboration to reduce at minimum the impact of natural radioactivity. We describe our efforts for an optimized experimental design, a careful material screening and accurate detector production handling, and a constant control of the expected results through a meticulous Monte Carlo simulation program. We show that all these actions should allow us to keep the background count rate safely below the target value of 10 Hz in the default fiducial volume, above an energy threshold of 0.7 MeV. △ Less

Submitted 13 October, 2021; v1 submitted 8 July, 2021; originally announced July 2021.

Comments: 35 pages, 12 figures