-
Improved Photocatalytic Performance via Air-Plasma Modification of Titanium Dioxide: Insights from Experimental and Simulation Investigation
Authors:
C. Ugwumadu,
I. Olaniyan,
H. K. Jeong,
D. A. Drabold
Abstract:
Commercial titanium dioxide is successfully plasma-treated under ambient conditions for different time periods, leading to reduced crystallite size and the creation of oxygen vacancies. Density functional theory-based calculations reveal the emergence of additional localized states close to the conduction band, primarily associated with under-coordinated titanium atoms in non-stoichiometric titani…
▽ More
Commercial titanium dioxide is successfully plasma-treated under ambient conditions for different time periods, leading to reduced crystallite size and the creation of oxygen vacancies. Density functional theory-based calculations reveal the emergence of additional localized states close to the conduction band, primarily associated with under-coordinated titanium atoms in non-stoichiometric titanium-oxide systems. The plasma-treated samples exhibit improved photocatalytic performance in the degradation of methylene blue compared to untreated samples. Moreover, the 4-hour plasma-treated photocatalyst demonstrates commendable stability and reusability. This work highlights the potential of cost-effective plasma treatment as a simple modification technique to significantly enhance the photocatalytic capabilities of titanium dioxide.
△ Less
Submitted 3 September, 2023;
originally announced September 2023.
-
Broadband generation of quasi bound-state-in-continuum modes using subwavelength truncated cone resonators
Authors:
Chun-Ho Lee,
Mohamad Reza Nurrahman,
Dongha Kim,
Kwang-Yong Jeong,
Kyoung-Ho Kim,
Chun-Ho Lee,
Min-Kyo Seo
Abstract:
Allowing a high quality factor (Q-factor) to a sub-wavelength dielectric resonator, quasi-bound states in the continuum (Q-BIC) has gained much interest. However, the Q-BIC resonance condition is too sensitive to the geometry of the resonator and its practical broadband generation on a single-wafer platform has been limited. Here, we present that employing the base angle as a structural degree of…
▽ More
Allowing a high quality factor (Q-factor) to a sub-wavelength dielectric resonator, quasi-bound states in the continuum (Q-BIC) has gained much interest. However, the Q-BIC resonance condition is too sensitive to the geometry of the resonator and its practical broadband generation on a single-wafer platform has been limited. Here, we present that employing the base angle as a structural degree of freedom, the truncated nano-cone resonator supports the Q-BIC resonance with a high Q-factor of >150 over a wide wavelength range of >100 nm. We expect our approach will boost the utilization of the Q-BIC resonance for various applications requiring broadband spectral tuning.
△ Less
Submitted 6 March, 2023; v1 submitted 13 February, 2023;
originally announced February 2023.
-
Decomposed entropy and estimation of output power in deformed microcavity lasers
Authors:
Kyu-Won Park,
Kwon-Wook Son,
Chang-Hyun Ju,
Kabgyun Jeong
Abstract:
Park et al. [Phys. Rev. A 106, L031504 (2022)] showed that the Shannon entropy of the probability distribution of a single random variable for far-field profiles (FFPs) in deformed microcavity lasers can efficiently measure the directionality of deformed microcavity lasers. In this study, we instead consider two random variables of FFPs with joint probability distributions and introduce the decomp…
▽ More
Park et al. [Phys. Rev. A 106, L031504 (2022)] showed that the Shannon entropy of the probability distribution of a single random variable for far-field profiles (FFPs) in deformed microcavity lasers can efficiently measure the directionality of deformed microcavity lasers. In this study, we instead consider two random variables of FFPs with joint probability distributions and introduce the decomposed (Shannon) entropy for the peak intensity of directional emissions. This provides a new foundation such that the decomposed entropy can estimate the degree of the output power at given FFPs without any further information.
△ Less
Submitted 12 December, 2022; v1 submitted 29 October, 2022;
originally announced October 2022.
-
Entropic measure of directional emissions in microcavity lasers
Authors:
Kyu-Won Park,
Chang-Hyun Ju,
Kabgyun Jeong
Abstract:
We propose a noble notion of the directional emission in microcavity lasers. First, Shannon entropy of the far-field profiles in the polar coordinate can quantify the degree of unidirectionality of the emission, while previous notions about the unidirectionality can not efficiently measure in the robust range against a variation of the deformation parameter. Second, a divergence angle of the direc…
▽ More
We propose a noble notion of the directional emission in microcavity lasers. First, Shannon entropy of the far-field profiles in the polar coordinate can quantify the degree of unidirectionality of the emission, while previous notions about the unidirectionality can not efficiently measure in the robust range against a variation of the deformation parameter. Second, a divergence angle of the directional emission is defined phenomenologically in terms of full width at half maximum, and it is barely applicable to a complicated peak structure. However, Shannon entropy of semi-marginal probability of the far-field profiles in the cartesian coordinate can present equivalent results, and moreover it is applicable to even the cases with a complicated peak structure of the emission.
△ Less
Submitted 19 September, 2022; v1 submitted 2 April, 2022;
originally announced April 2022.
-
Single Pixel MEMS Spectrometer using Electrothermal Tunable Grating
Authors:
Jaehun Jeon,
Jung-Woo Park,
Gi Beom Kim,
Myeong-Su Ahn,
Ki-Hun Jeong
Abstract:
Miniaturized spectrometers are widely used for non-destructive and on-field spectral analysis. Here we report a tunable grating-based MEMS spectrometer for visible to near-infrared (VIS-NIR) spectroscopy. The MEMS spectrometer consists of a spherical mirror and an electrothermally actuated tunable grating. The spectrometer detects the dispersed spectral signal with a single-pixel detector by tilti…
▽ More
Miniaturized spectrometers are widely used for non-destructive and on-field spectral analysis. Here we report a tunable grating-based MEMS spectrometer for visible to near-infrared (VIS-NIR) spectroscopy. The MEMS spectrometer consists of a spherical mirror and an electrothermally actuated tunable grating. The spectrometer detects the dispersed spectral signal with a single-pixel detector by tilting the diffraction grating. The large tilting angle from electrothermal actuation and highly dispersive diffraction grating improves the spectral range and resolution, respectively. The MEMS spectrometer was fully packaged within 1.7 cm3 and provides a measurable spectral range up to 800 nm with an average 1.96 nm spectral resolution. This miniaturized single-pixel spectrometer can provide diverse applications for advanced mobile spectral analysis in agricultural, industrial, or medical fields.
△ Less
Submitted 17 March, 2022;
originally announced March 2022.
-
Solid immersion microlens arrays-based light-field camera for 3D in vivo imaging
Authors:
Jae-Myeong Kwon,
Sang-In Bae,
Taehan Kim,
Jeong Kun Kim,
Ki-Hun Jeong
Abstract:
Light-field imaging facilitates the miniaturization of 3D cameras while it requires the extension of the depth-of-field (DoF) for practical applications such as endoscopy and intraoral scanning. Here we report a light-field camera (LFC) using solid immersion microlens arrays (siMLAs) for 3D biomedical imaging. The experimental results show that the focal length of MLAs is increased by 2.7 times an…
▽ More
Light-field imaging facilitates the miniaturization of 3D cameras while it requires the extension of the depth-of-field (DoF) for practical applications such as endoscopy and intraoral scanning. Here we report a light-field camera (LFC) using solid immersion microlens arrays (siMLAs) for 3D biomedical imaging. The experimental results show that the focal length of MLAs is increased by 2.7 times and the transmittance is enhanced up to 6.9% by immersion in PDMS film. In particular, the f-number of siMLAs exceeds the limit of conventional MLAs fabricated by thermal reflow, resulting in a larger DoF. The LFC based on siMLAs has successfully acquired the depth map of a dental phantom as a hand-held scanner. This LFC suggests a new way for developing a compact in vivo 3D imaging system.
△ Less
Submitted 17 March, 2022;
originally announced March 2022.
-
Imaging real-time amorphization of hybrid perovskite solar cells under electrical biasing
Authors:
Min-cheol Kim,
Namyoung Ahn,
Diyi Cheng,
Mingjie Xu,
Xiaoqing Pan,
Suk Jun Kim,
Yanqi Luo,
David P. Fenning,
Darren H. S. Tan,
Minghao Zhang,
So-Yeon Ham,
Kiwan Jeong,
Mansoo Choi,
Ying Shirley Meng
Abstract:
Perovskite solar cells have drawn much attention in recent years, owing to its world-record setting photovoltaic performances. Despite its promising use in tandem applications and flexible devices, its practicality is still limited by its structural instability often arising from ion migration and defect formation. While it is generally understood that ion instability is a primary cause for degrad…
▽ More
Perovskite solar cells have drawn much attention in recent years, owing to its world-record setting photovoltaic performances. Despite its promising use in tandem applications and flexible devices, its practicality is still limited by its structural instability often arising from ion migration and defect formation. While it is generally understood that ion instability is a primary cause for degradation, there is still a lack of direct evidence of structural transformation at the atomistic scale. Such an understanding is crucial to evaluate and pin-point how such instabilities are induced relative to external perturbations such as illumination or electrical bias with time, allowing researchers to devise effective strategies to mitigate them. Here, we designed an in-situ TEM setup to enable real-time observation of amorphization in double cation mixed perovskite materials under electrical biasing at 1 V. It is found that amorphization occurs along the (001) and (002) planes, which represents the observation of in-situ facet-dependent amorphization of a perovskite crystal. To reverse the degradation, the samples were heated at 50 oC and was found to recrystallize, effectively regaining its performance losses. This work is vital toward understanding fundamental ion-migration phenomena and address instability challenges of perovskite optoelectronics.
△ Less
Submitted 23 October, 2020;
originally announced October 2020.
-
Characterization of single photon sources for radiometry applications at room temperature
Authors:
Hee-Jin Lim,
Dong-Hoon Lee,
In-ho Bae,
Kwang-Yong Jeong,
Christoph Becher,
Sejeong Kim,
Igor Aharonovich,
Kee Suk Hong
Abstract:
A single photon source with high repeatability and low uncertainties is the key element for few-photon metrology based on photon numbers. While low photon number fluctuations and high repeatability are important figures for qualification as a standard light source, these characteristics are limited in single photon emitters by some malicious phenomena like blinking or internal relaxations to varyi…
▽ More
A single photon source with high repeatability and low uncertainties is the key element for few-photon metrology based on photon numbers. While low photon number fluctuations and high repeatability are important figures for qualification as a standard light source, these characteristics are limited in single photon emitters by some malicious phenomena like blinking or internal relaxations to varying degrees in different materials. This study seeks to characterize photon number fluctuations and repeatability for radiometry applications at room temperature. For generality in this study, we collected photon statistics data with various single photon emitters of $g^{(2)}(0) < 1$ at low excitation power and room temperature in three material platforms: silicon vacancy in diamond, defects in GaN, and vacancy in hBN. We found common factors related with the relaxation times of the internal states that indirectly affect photon number stability. We observed a high stability of photon number with defects in GaN due to faster relaxations compared with vacancies in hBN, which on the other hand produced high rates ($> 10^6$) of photons per second. Finally, we demonstrate repeatable radiant flux measurements of a bright hBN single photon emitter for a wide radiant flux range from a few tens of femtowatts to one picowatt.
△ Less
Submitted 21 July, 2020;
originally announced July 2020.
-
Pulsatile therapy for perovskite solar cells
Authors:
Kiwan Jeong,
Junseop Byeon,
Jihun Jang,
Namyoung Ahn,
Mansoo Choi
Abstract:
The current utmost challenge for commercialization of perovskite solar cells is to ensure long-term operation stability. Here, we developed the pulsatile therapy which can prolong device lifetime by addressing accumulation of both charges and ions in the middle of maximum power point tracking (MPPT). In the technique, reverse biases are repeatedly applied for a very short time without any pause of…
▽ More
The current utmost challenge for commercialization of perovskite solar cells is to ensure long-term operation stability. Here, we developed the pulsatile therapy which can prolong device lifetime by addressing accumulation of both charges and ions in the middle of maximum power point tracking (MPPT). In the technique, reverse biases are repeatedly applied for a very short time without any pause of operation, leading to stabilization of the working device. The observed efficacies of our pulsatile therapy are delaying irreversible degradation as well as restoring degraded photocurrent during MPPT operation. We suggest an integrated mechanism underlying the therapy, in which harmful deep-level defects can be prevented to form and already formed defects can be cured by driving charge-state transition. We demonstrated the therapy to maintain defect-tolerance continuously, leading to outstanding improvement of lifetime and harvesting power. The unique technique will open up new possibility to commercialize perovskite materials into a real market.
△ Less
Submitted 13 July, 2020;
originally announced July 2020.
-
Bright high-purity quantum emitters in aluminium nitride integrated photonics
Authors:
Tsung-Ju Lu,
Benjamin Lienhard,
Kwang-Yong Jeong,
Hyowon Moon,
Ava Iranmanesh,
Gabriele Grosso,
Dirk Englund
Abstract:
Solid-state quantum emitters (QEs) are fundamental in photonic-based quantum information processing. There is strong interest to develop high-quality QEs in III-nitride semiconductors because of their sophisticated manufacturing driven by large and growing applications in optoelectronics, high voltage power transistors, and microwave amplifiers. Here, we report the generation and direct integratio…
▽ More
Solid-state quantum emitters (QEs) are fundamental in photonic-based quantum information processing. There is strong interest to develop high-quality QEs in III-nitride semiconductors because of their sophisticated manufacturing driven by large and growing applications in optoelectronics, high voltage power transistors, and microwave amplifiers. Here, we report the generation and direct integration of QEs in an aluminium nitride-based photonic integrated circuit platform. For individual waveguide-integrated QEs, we measure an off-chip count rate exceeding $6 \times 10^{4}$ counts per second (cps) (saturation rate > $8.6 \times 10^{4}$ cps). In an unpatterned thin-film sample, we measure antibunching with $g^{(2)}(0) \sim 0.05$ and photon count rates exceeding $8 \times 10^{5}$ cps (saturation rate > $1 \times 10^{6}$ cps). Although spin and detailed optical linewidth measurements are left for future work, these results already show the potential for high-quality QEs monolithically integrated in a wide range of III-nitride device technologies that would enable new quantum device opportunities and industrial scalability.
△ Less
Submitted 29 June, 2020;
originally announced June 2020.
-
Lasing from multipole topological corner states
Authors:
Ha-Reem Kim,
Min-Soo Hwang,
Daria Smirnova,
Kwang-Yong Jeong,
Yuri Kivshar,
Hong-Gyu Park
Abstract:
Topological photonics provides a fundamental framework for robust manipulation of light, including directional transport and localization with built-in immunity to disorder. Combined with an optical gain, active topological cavities hold special promise for a design of light-emitting devices. Most studies to date have focused on lasing at topological edges of finite systems or domain walls. Recent…
▽ More
Topological photonics provides a fundamental framework for robust manipulation of light, including directional transport and localization with built-in immunity to disorder. Combined with an optical gain, active topological cavities hold special promise for a design of light-emitting devices. Most studies to date have focused on lasing at topological edges of finite systems or domain walls. Recently discovered higher-order topological phases enable strong high-quality confinement of light at the corners. Here we demonstrate lasing action of corner states in a nanophotonic topological cavity. We identify four multipole corner modes with distinct emission profiles via hyperspectral imaging and discern signatures of non-Hermitian radiative coupling of leaky topological states. In addition, depending on the pump position in a large-size cavity, we selectively generate lasing from either edge or corner states within the topological bandgap. Our findings introduce pathways to engineer collective resonances and tailor generation of light in active topological circuits.
△ Less
Submitted 29 April, 2020;
originally announced April 2020.
-
Modular system for fluorescence-based single photon generation using retro-reflector
Authors:
Hee-Jin Lim,
Kwang-Yong Jeong,
Dong-Hoon Lee,
Kee Suk Hong
Abstract:
Apparatus for fluorescence-based single photon generation includes collection optics and various setups for characterization. Managing this system often reveals complexity in such a way that adjusting in a small region changes optimal alignments of others. We suggest here a modular system, where the optimal alignment is given to each compartment and tested independently. Based on this concept, we…
▽ More
Apparatus for fluorescence-based single photon generation includes collection optics and various setups for characterization. Managing this system often reveals complexity in such a way that adjusting in a small region changes optimal alignments of others. We suggest here a modular system, where the optimal alignment is given to each compartment and tested independently. Based on this concept, we built a system for single photon generation with fluorescence center in hexagonal boron nitride nano-flake, advantageous for scaling up the number of single mode fiber output and a high degree of stability. The system allowed for a practical use of single photon stream extended over an hour with a uniform count rate of small fluctuation levels.
△ Less
Submitted 18 November, 2019; v1 submitted 5 August, 2019;
originally announced August 2019.
-
Fluid-structure coupling of concentric double FGM shells with different lengths
Authors:
Ehsan Moshkelgosha,
Ehsan Askari,
Kyeong-Hoon Jeong,
Ali Shafiei
Abstract:
The aim of this study is to develop a semi-analytical method to investigate fluid-structure coupling of concentric double shells with different lengths and elastic behaviours. Co-axial shells constitute a cylindrical circular container and a baffle submerged inside the stored fluid. The container shell is made of functionally graded materials with mechanical properties changing through its thickne…
▽ More
The aim of this study is to develop a semi-analytical method to investigate fluid-structure coupling of concentric double shells with different lengths and elastic behaviours. Co-axial shells constitute a cylindrical circular container and a baffle submerged inside the stored fluid. The container shell is made of functionally graded materials with mechanical properties changing through its thickness continuously. The baffle made of steel is fixed along its top edge and submerged inside fluid such that its lower edge freely moves. The developed approach is verified using a commercial finite element computer code. Although the model is presented for a specific case in the present work, it can be generalized to investigate coupling of shellplate structures via fluid. It is shown that the coupling between concentric shells occurs only when they vibrate in a same circumferential mode number, n. It is also revealed that the normalized vibration amplitude of the inner shell is about the same as that of the outer shell, for narrower radial gaps. Moreover, the natural frequencies of the fluid-coupled system gradually decrease and converge to the certain values as the gradient index increases.
△ Less
Submitted 2 May, 2019;
originally announced May 2019.
-
Au/Ag bimetallic nanocomposites as a highly sensitive plasmonic material
Authors:
Taerin Chung,
Charles Soon Hong Hwang,
Myeong-Su Ahn,
Ki-Hun Jeong
Abstract:
We report Au/Ag bimetallic nanocomposites as a highly sensitive plasmonic material. A unit approach via a three-dimensional numerical modeling is introduced to observe collective plasmon resonance in Au/Ag bimetallic nanocomposites as well as Au mono-metallic nanoensembles. Au nanoensembles provide consistently identical plasmon wavelength, independent of inter-unit distance. In analogy with mono-…
▽ More
We report Au/Ag bimetallic nanocomposites as a highly sensitive plasmonic material. A unit approach via a three-dimensional numerical modeling is introduced to observe collective plasmon resonance in Au/Ag bimetallic nanocomposites as well as Au mono-metallic nanoensembles. Au nanoensembles provide consistently identical plasmon wavelength, independent of inter-unit distance. In analogy with mono-metallic nanoensembles, Au/Ag bimetallic nanocomposites distinctly feature converging dual plasmon resonance peaks to a single plasmon resonance peak, strongly depending on the packing density and the unit size. An effective unit size of bimetallic nanocomposites is below 2.5 nm in a subwavelength structure, which is small enough to feature bimetallic nanocomposites. As a result, the Au/Ag bimetallic nanocomposites clearly show exceptionally high sensitivity and figure-ofmerit (approximately 3 fold of conventional plasmon sensitivity and 4.3 fold of conventional plasmon FOM), resulting from coupled Au-Ag quadrupole bimetallic nanounits. This study provides essential rationales for Au/Ag bimetallic nanocomposites serving as a desirable and alternative plasmonic material for advanced nanoplasmonic sensing technologies.
△ Less
Submitted 27 June, 2018;
originally announced June 2018.
-
Non-Hermiticity and conservation of orthogonal relation in dielectric microcavity
Authors:
Kyu-Won Park,
Songky Moon,
Hyunseok Jeong,
Jaewan Kim,
Kabgyun Jeong
Abstract:
Non-Hermitian properties of open quantum systems and their applications have attracted much attention in recent years. While most of the studies focus on the characteristic nature of non-Hermitian systems, here we focus on the following issue: A non-Hermitian system can be a subsystem of a Hermitian system as one can clearly see in Feshbach projective operator (FPO) formalism. In this case, the or…
▽ More
Non-Hermitian properties of open quantum systems and their applications have attracted much attention in recent years. While most of the studies focus on the characteristic nature of non-Hermitian systems, here we focus on the following issue: A non-Hermitian system can be a subsystem of a Hermitian system as one can clearly see in Feshbach projective operator (FPO) formalism. In this case, the orthogonality of the eigenvectors of the total (Hermitian) system must be sustained, despite the eigenvectors of the subsystem (non-Hermitian) satisfy the bi-orthogonal condition. Therefore, one can predict that there must exist some remarkable processes that relate the non-Hermitian subsystem and the rest part, and ultimately preserve the Hermiticity of the total system. In this paper, we study such processes in open elliptical microcavities. The inner part of the cavity is a non-Hermitian system, and the outer part is the coupled bath in FPO formalism. We investigate the correlation between the inner- and the outer-part behaviors associated with the avoided resonance crossings (ARCs), and analyze the results in terms of a trade-off between the relative difference of self-energies and collective Lamb shifts. These results come from the conservation of the orthogonality in the total Hermitian quantum system.
△ Less
Submitted 17 July, 2018; v1 submitted 19 February, 2018;
originally announced February 2018.
-
Structural Coloration of Transmission Light through Self-Aligned and Complementary Plasmonic Nanostructures
Authors:
Myeong-Su Ahn,
Taerin Chung,
Ki-Hun Jeong
Abstract:
Structural coloration of natural surfaces often originates from the change of reflected colors depending on the viewing or illumination angle. Recently, the structural coloration of nanoplasmonic structures have attracted a great deal of attention due to high compactness, robust stability and high color-tunability, as well as high sensitivity to an incident angle. Here we report complementary plas…
▽ More
Structural coloration of natural surfaces often originates from the change of reflected colors depending on the viewing or illumination angle. Recently, the structural coloration of nanoplasmonic structures have attracted a great deal of attention due to high compactness, robust stability and high color-tunability, as well as high sensitivity to an incident angle. Here we report complementary plasmonic structures (CPS) for transmission structural coloration by tailoring a single spectral peak depending on the incident angle of light. The CPS features self-aligned silver nanohole and nanodisk arrays, supported by dielectric nanopillar arrays of hydrogen silsesquioxane. Unlike conventional hybridized nanostructures of plasmonic nanohole and nanodisk arrays, the nanodisks of CPS effectively attenuate undesired spectral peaks of nanoholes by exploiting an extinction peak of nanodisks, serving as a spectral suppressor. As a result, a single transmission spectral peak becomes red-shifted from 736 nm to 843 nm as the incident angle varies from 0° to 30°. This unique configuration provides a new direction for tunable filters that can be utilized for compact multispectral or hyperspectral imaging applications.
△ Less
Submitted 22 January, 2018;
originally announced January 2018.
-
Photophysics of GaN single photon sources in the visible spectral range
Authors:
Amanuel M. Berhane,
Kwang-Yong Jeong,
Carlo Bradac,
Michael Walsh,
Dirk Englund,
Milos Toth,
Igor Aharonovich
Abstract:
In this work, we present a detailed photophysical analysis of recently-discovered optically stable, single photon emitters (SPEs) in Gallium Nitride (GaN). Temperature-resolved photoluminescence measurements reveal that the emission lines at 4 K are three orders of magnitude broader than the transform-limited widths expected from excited state lifetime measurements. The broadening is ascribed to u…
▽ More
In this work, we present a detailed photophysical analysis of recently-discovered optically stable, single photon emitters (SPEs) in Gallium Nitride (GaN). Temperature-resolved photoluminescence measurements reveal that the emission lines at 4 K are three orders of magnitude broader than the transform-limited widths expected from excited state lifetime measurements. The broadening is ascribed to ultra-fast spectral diffusion. Continuing the photophysics study on several emitters at room temperature (RT), a maximum average brightness of ~427 kCounts/s is measured. Furthermore, by determining the decay rates of emitters undergoing three-level optical transitions, radiative and non-radiative lifetimes are calculated at RT. Finally, polarization measurements from 14 emitters are used to determine visibility as well as dipole orientation of defect systems within the GaN crystal. Our results underpin some of the fundamental properties of SPE in GaN both at cryogenic and RT, and define the benchmark for future work in GaN-based single-photon technologies.
△ Less
Submitted 30 August, 2017;
originally announced August 2017.
-
Physics Potentials with the Second Hyper-Kamiokande Detector in Korea
Authors:
Hyper-Kamiokande proto-collaboration,
:,
K. Abe,
Ke. Abe,
S. H. Ahn,
H. Aihara,
A. Aimi,
R. Akutsu,
C. Andreopoulos,
I. Anghel,
L. H. V. Anthony,
M. Antonova,
Y. Ashida,
V. Aushev,
M. Barbi,
G. J. Barker,
G. Barr,
P. Beltrame,
V. Berardi,
M. Bergevin,
S. Berkman,
L. Berns,
T. Berry,
S. Bhadra,
D. Bravo-Bergu no
, et al. (331 additional authors not shown)
Abstract:
Hyper-Kamiokande consists of two identical water-Cherenkov detectors of total 520~kt with the first one in Japan at 295~km from the J-PARC neutrino beam with 2.5$^{\textrm{o}}$ Off-Axis Angles (OAAs), and the second one possibly in Korea in a later stage. Having the second detector in Korea would benefit almost all areas of neutrino oscillation physics mainly due to longer baselines. There are sev…
▽ More
Hyper-Kamiokande consists of two identical water-Cherenkov detectors of total 520~kt with the first one in Japan at 295~km from the J-PARC neutrino beam with 2.5$^{\textrm{o}}$ Off-Axis Angles (OAAs), and the second one possibly in Korea in a later stage. Having the second detector in Korea would benefit almost all areas of neutrino oscillation physics mainly due to longer baselines. There are several candidate sites in Korea with baselines of 1,000$\sim$1,300~km and OAAs of 1$^{\textrm{o}}$$\sim$3$^{\textrm{o}}$. We conducted sensitivity studies on neutrino oscillation physics for a second detector, either in Japan (JD $\times$ 2) or Korea (JD + KD) and compared the results with a single detector in Japan. Leptonic CP violation sensitivity is improved especially when the CP is non-maximally violated. The larger matter effect at Korean candidate sites significantly enhances sensitivities to non-standard interactions of neutrinos and mass ordering determination. Current studies indicate the best sensitivity is obtained at Mt. Bisul (1,088~km baseline, $1.3^\circ$ OAA). Thanks to a larger (1,000~m) overburden than the first detector site, clear improvements to sensitivities for solar and supernova relic neutrino searches are expected.
△ Less
Submitted 26 March, 2018; v1 submitted 18 November, 2016;
originally announced November 2016.
-
Bright Room-Temperature Single Photon Emission from Defects in Gallium Nitride
Authors:
Amanuel M. Berhane,
Kwang-Yong Jeong,
Zoltán Bodrog,
Saskia Fiedler,
Tim Schröder,
Noelia Vico Triviño,
Tomás Palacios,
Adam Gali,
Milos Toth,
Dirk Englund,
Igor Aharonovich
Abstract:
Single photon emitters play a central role in many photonic quantum technologies. A promising class of single photon emitters consists of atomic color centers in wide-bandgap crystals, such as diamond silicon carbide and hexagonal boron nitride. However, it is currently not possible to grow these materials as sub-micron thick films on low-refractive index substrates, which is necessary for mature…
▽ More
Single photon emitters play a central role in many photonic quantum technologies. A promising class of single photon emitters consists of atomic color centers in wide-bandgap crystals, such as diamond silicon carbide and hexagonal boron nitride. However, it is currently not possible to grow these materials as sub-micron thick films on low-refractive index substrates, which is necessary for mature photonic integrated circuit technologies. Hence, there is great interest in identifying quantum emitters in technologically mature semiconductors that are compatible with suitable heteroepitaxies. Here, we demonstrate robust single photon emitters based on defects in gallium nitride (GaN), the most established and well understood semiconductor that can emit light over the entire visible spectrum. We show that the emitters have excellent photophysical properties including a brightness in excess of 500x10^3 counts/s. We further show that the emitters can be found in a variety of GaN wafers, thus offering reliable and scalable platform for further technological development. We propose a theoretical model to explain the origin of these emitters based on cubic inclusions in hexagonal gallium nitride. Our results constitute a feasible path to scalable, integrated on-chip quantum technologies based on GaN.
△ Less
Submitted 15 October, 2016;
originally announced October 2016.
