Showing 1–50 of 72 results for author: Moon, S

Multiphysics Enabled Numerical Modeling of a Plasma Based Electrically Small VHF-UHF Antenna

Authors: Samsud Moon

Abstract: A three-dimensional model of a novel plasma based electrically small antenna is developed for investigating the gas properties and antenna parameters under a low pressure, low plasma temperature environment. The antenna exhibits dipole antenna-like behavior with wide-band impedance matching from $213-700$ MHz. Plasma is sustained by $0.9$ W of RF input power at $100$ MHz and the gas pressure is st… ▽ More A three-dimensional model of a novel plasma based electrically small antenna is developed for investigating the gas properties and antenna parameters under a low pressure, low plasma temperature environment. The antenna exhibits dipole antenna-like behavior with wide-band impedance matching from $213-700$ MHz. Plasma is sustained by $0.9$ W of RF input power at $100$ MHz and the gas pressure is strategically controlled at $500$ mili-Torr. The simulated $S_{11}$ is verified against the available experimental data and further antenna parameters are extracted. The proposed ESA shows dipole-like radiation pattern with a radiation efficiency of $16\%$ at $700$ MHz. The performance metric for ESAs, the Chu-limit, is exceeded by this antenna with the $Bandwidth\times Efficiency$ reaching $0.168$ with a $ka$ of $0.5571$.The findings from this letter demonstrate the practicability of using COMSOL Multiphysics as a tool for predicting plasma behavior and antenna performance while the boundary conditions for all the coupled physics are respected. △ Less

Submitted 5 May, 2024; originally announced May 2024.

Comments: 4 pages, 8 figures, submitted to PEEIACON 2024

A Plasma-Based Approach for High-Power Tunable Microwave Varactors

Authors: Samsud Moon

Abstract: This work presents a tunable varactor with tunability in the range of 100s of MHz and a capacitance delta of about 36 pF by employing a perpendicular magnetic field to a capacitively-coupled (CCP) RF plasma cell. A comprehensive high-frequency circuit model for the fabricated varactor is proposed and verified experimentally for a plasma electron number density of $2.95\times10^{17}m^{-3}$ which ha… ▽ More This work presents a tunable varactor with tunability in the range of 100s of MHz and a capacitance delta of about 36 pF by employing a perpendicular magnetic field to a capacitively-coupled (CCP) RF plasma cell. A comprehensive high-frequency circuit model for the fabricated varactor is proposed and verified experimentally for a plasma electron number density of $2.95\times10^{17}m^{-3}$ which has a tunability of 146 MHz with a magnetic flux density ranging from 0 to 246 milliTesla. Under a pressure of 64 milliTorrs, the Argon ccp was found to have a variable capacitance ranging from 4 pF to 41.72 pF. △ Less

Submitted 28 April, 2024; originally announced April 2024.

Comments: 3 pages,5 figures

Enhanced ClNO$_2$ formation at the interface of sea-salt aerosol

Authors: Seokjin Moon, David T. Limmer

Abstract: The reactive uptake of $\mathrm{N_2O_5}$ on sea-spray aerosol plays a key role in regulating NO$_\mathrm{x}$ concentration in the troposphere. Despite numerous field and laboratory studies, a microscopic understanding of its heterogeneous reactivity remains unclear. Here, we use molecular simulation and theory to elucidate the chlorination of $\mathrm{N_2O_5}$ to form ClNO$_2$, the primary reactiv… ▽ More The reactive uptake of $\mathrm{N_2O_5}$ on sea-spray aerosol plays a key role in regulating NO$_\mathrm{x}$ concentration in the troposphere. Despite numerous field and laboratory studies, a microscopic understanding of its heterogeneous reactivity remains unclear. Here, we use molecular simulation and theory to elucidate the chlorination of $\mathrm{N_2O_5}$ to form ClNO$_2$, the primary reactive channel within sea-spray aerosol. We find the formation of ClNO$_2$ is markedly enhanced at the air-water interface due to the stabilization of the charge-delocalized transition state, as evident from the formulation of bimolecular rate theory in heterogeneous environments. We explore the consequences of the enhanced interfacial reactivity in the uptake of $\mathrm{N_2O_5}$ using numerical solutions of molecular reaction-diffusion equations as well as their analytical approximations. Our results suggest that the current interpretation of aerosol branching ratios needs to be revisited. △ Less

Submitted 13 March, 2024; originally announced March 2024.

Fibre-integrated van der Waals quantum sensor with an optimal cavity interface

Authors: Jong Sung Moon, Benjamin Whitefield, Lesley Spencer, Mehran Kianinia, Madeline Hennessey, Milos Toth, Woong Bae Jeon, Je-Hyung Kim, Igor Aharonovich

Abstract: Integrating quantum materials with fibre optics adds advanced functionalities to a variety of applications, and introduces fibre-based quantum devices such as remote sensors capable of probing multiple physical parameters. However, achieving optimal integration between quantum materials and fibres is challenging, particularly due to difficulties in fabrication of quantum elements with suitable dim… ▽ More Integrating quantum materials with fibre optics adds advanced functionalities to a variety of applications, and introduces fibre-based quantum devices such as remote sensors capable of probing multiple physical parameters. However, achieving optimal integration between quantum materials and fibres is challenging, particularly due to difficulties in fabrication of quantum elements with suitable dimensions and an efficient photonic interface to a commercial optical fibre. Here we demonstrate a new modality for a fibre-integrated van der Waals quantum sensor. We design and fabricate a hole-based circular Bragg grating cavity from hexagonal boron nitride (hBN), engineer optically active spin defects within the cavity, and integrate the cavity with an optical fibre using a deterministic pattern transfer technique. The fibre-integrated hBN cavity enables efficient excitation and collection of optical signals from spin defects in hBN, thereby enabling all-fibre integrated quantum sensors. Moreover, we demonstrate remote sensing of a ferromagnetic material and of arbitrary magnetic fields. All in all, the hybrid fibre-based quantum sensing platform may pave the way to a new generation of robust, remote, multi-functional quantum sensors. △ Less

Submitted 26 February, 2024; originally announced February 2024.

Comments: 13 Pages, 4 Figures

Deep-learning-driven end-to-end metalens imaging

Authors: Joonhyuk Seo, Jaegang Jo, Joohoon Kim, Joonho Kang, Chanik Kang, Seongwon Moon, Eunji Lee, Jehyeong Hong, Junsuk Rho, Haejun Chung

Abstract: Recent advances in metasurface lenses (metalenses) have shown great potential for opening a new era in compact imaging, photography, light detection and ranging (LiDAR), and virtual reality/augmented reality (VR/AR) applications. However, the fundamental trade-off between broadband focusing efficiency and operating bandwidth limits the performance of broadband metalenses, resulting in chromatic ab… ▽ More Recent advances in metasurface lenses (metalenses) have shown great potential for opening a new era in compact imaging, photography, light detection and ranging (LiDAR), and virtual reality/augmented reality (VR/AR) applications. However, the fundamental trade-off between broadband focusing efficiency and operating bandwidth limits the performance of broadband metalenses, resulting in chromatic aberration, angular aberration, and a relatively low efficiency. In this study, a deep-learning-based image restoration framework is proposed to overcome these limitations and realize end-to-end metalens imaging, thereby achieving aberration-free full-color imaging for mass-produced metalenses with 10-mm diameter. Neural-network-assisted metalens imaging achieved a high resolution comparable to that of the ground truth image. △ Less

Submitted 10 May, 2024; v1 submitted 5 December, 2023; originally announced December 2023.

Comments: 17 pages, 7 figures, 1 table

GeoTMI:Predicting quantum chemical property with easy-to-obtain geometry via positional denoising

Authors: Hyeonsu Kim, Jeheon Woo, Seonghwan Kim, Seokhyun Moon, Jun Hyeong Kim, Woo Youn Kim

Abstract: As quantum chemical properties have a dependence on their geometries, graph neural networks (GNNs) using 3D geometric information have achieved high prediction accuracy in many tasks. However, they often require 3D geometries obtained from high-level quantum mechanical calculations, which are practically infeasible, limiting their applicability to real-world problems. To tackle this, we propose a… ▽ More As quantum chemical properties have a dependence on their geometries, graph neural networks (GNNs) using 3D geometric information have achieved high prediction accuracy in many tasks. However, they often require 3D geometries obtained from high-level quantum mechanical calculations, which are practically infeasible, limiting their applicability to real-world problems. To tackle this, we propose a new training framework, GeoTMI, that employs denoising process to predict properties accurately using easy-to-obtain geometries (corrupted versions of correct geometries, such as those obtained from low-level calculations). Our starting point was the idea that the correct geometry is the best description of the target property. Hence, to incorporate information of the correct, GeoTMI aims to maximize mutual information between three variables: the correct and the corrupted geometries and the property. GeoTMI also explicitly updates the corrupted input to approach the correct geometry as it passes through the GNN layers, contributing to more effective denoising. We investigated the performance of the proposed method using 3D GNNs for three prediction tasks: molecular properties, a chemical reaction property, and relaxed energy in a heterogeneous catalytic system. Our results showed consistent improvements in accuracy across various tasks, demonstrating the effectiveness and robustness of GeoTMI. △ Less

Submitted 14 December, 2023; v1 submitted 28 March, 2023; originally announced April 2023.

Highly-parallelized simulation of a pixelated LArTPC on a GPU

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, Z. Ahmad, J. Ahmed, B. Aimard, F. Akbar, K. Allison, S. Alonso Monsalve, M. Alrashed, C. Alt, A. Alton, R. Alvarez, P. Amedo, J. Anderson , et al. (1282 additional authors not shown)

Abstract: The rapid development of general-purpose computing on graphics processing units (GPGPU) is allowing the implementation of highly-parallelized Monte Carlo simulation chains for particle physics experiments. This technique is particularly suitable for the simulation of a pixelated charge readout for time projection chambers, given the large number of channels that this technology employs. Here we pr… ▽ More The rapid development of general-purpose computing on graphics processing units (GPGPU) is allowing the implementation of highly-parallelized Monte Carlo simulation chains for particle physics experiments. This technique is particularly suitable for the simulation of a pixelated charge readout for time projection chambers, given the large number of channels that this technology employs. Here we present the first implementation of a full microphysical simulator of a liquid argon time projection chamber (LArTPC) equipped with light readout and pixelated charge readout, developed for the DUNE Near Detector. The software is implemented with an end-to-end set of GPU-optimized algorithms. The algorithms have been written in Python and translated into CUDA kernels using Numba, a just-in-time compiler for a subset of Python and NumPy instructions. The GPU implementation achieves a speed up of four orders of magnitude compared with the equivalent CPU version. The simulation of the current induced on $10^3$ pixels takes around 1 ms on the GPU, compared with approximately 10 s on the CPU. The results of the simulation are compared against data from a pixel-readout LArTPC prototype. △ Less

Submitted 28 February, 2023; v1 submitted 19 December, 2022; originally announced December 2022.

Comments: 26 pages, 15 figures

Report number: FERMILAB-PUB-22-926-LBNF

Pulse shape discrimination using a convolutional neural network for organic liquid scintillator signals

Authors: K. Y. Jung, B. Y. Han, E. J. Jeon, Y. Jeong, H. S. Jo, J. Y. Kim, J. G. Kim, Y. D. Kim, Y. J. Ko, M. H. Lee, J. Lee, C. S. Moon, Y. M. Oh, H. K. Park, S. H. Seo, D. W. Seol, K. Siyeon, G. M. Sun, Y. S. Yoon, I. Yu

Abstract: A convolutional neural network (CNN) architecture is developed to improve the pulse shape discrimination (PSD) power of the gadolinium-loaded organic liquid scintillation detector to reduce the fast neutron background in the inverse beta decay candidate events of the NEOS-II data. A power spectrum of an event is constructed using a fast Fourier transform of the time domain raw waveforms and put in… ▽ More A convolutional neural network (CNN) architecture is developed to improve the pulse shape discrimination (PSD) power of the gadolinium-loaded organic liquid scintillation detector to reduce the fast neutron background in the inverse beta decay candidate events of the NEOS-II data. A power spectrum of an event is constructed using a fast Fourier transform of the time domain raw waveforms and put into CNN. An early data set is evaluated by CNN after it is trained using low energy $β$ and $α$ events. The signal-to-background ratio averaged over 1-10 MeV visible energy range is enhanced by more than 20% in the result of the CNN method compared to that of an existing conventional PSD method, and the improvement is even higher in the low energy region. △ Less

Submitted 15 January, 2023; v1 submitted 14 November, 2022; originally announced November 2022.

Comments: 16 pages, 10 figures

Identification and reconstruction of low-energy electrons in the ProtoDUNE-SP detector

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, Z. Ahmad, J. Ahmed, B. Aimard, F. Akbar, K. Allison, S. Alonso Monsalve, M. Alrashed, C. Alt, A. Alton, R. Alvarez, P. Amedo, J. Anderson , et al. (1235 additional authors not shown)

Abstract: Measurements of electrons from $ν_e$ interactions are crucial for the Deep Underground Neutrino Experiment (DUNE) neutrino oscillation program, as well as searches for physics beyond the standard model, supernova neutrino detection, and solar neutrino measurements. This article describes the selection and reconstruction of low-energy (Michel) electrons in the ProtoDUNE-SP detector. ProtoDUNE-SP is… ▽ More Measurements of electrons from $ν_e$ interactions are crucial for the Deep Underground Neutrino Experiment (DUNE) neutrino oscillation program, as well as searches for physics beyond the standard model, supernova neutrino detection, and solar neutrino measurements. This article describes the selection and reconstruction of low-energy (Michel) electrons in the ProtoDUNE-SP detector. ProtoDUNE-SP is one of the prototypes for the DUNE far detector, built and operated at CERN as a charged particle test beam experiment. A sample of low-energy electrons produced by the decay of cosmic muons is selected with a purity of 95%. This sample is used to calibrate the low-energy electron energy scale with two techniques. An electron energy calibration based on a cosmic ray muon sample uses calibration constants derived from measured and simulated cosmic ray muon events. Another calibration technique makes use of the theoretically well-understood Michel electron energy spectrum to convert reconstructed charge to electron energy. In addition, the effects of detector response to low-energy electron energy scale and its resolution including readout electronics threshold effects are quantified. Finally, the relation between the theoretical and reconstructed low-energy electron energy spectrum is derived and the energy resolution is characterized. The low-energy electron selection presented here accounts for about 75% of the total electron deposited energy. After the addition of lost energy using a Monte Carlo simulation, the energy resolution improves from about 40% to 25% at 50~MeV. These results are used to validate the expected capabilities of the DUNE far detector to reconstruct low-energy electrons. △ Less

Submitted 31 May, 2023; v1 submitted 2 November, 2022; originally announced November 2022.

Comments: 19 pages, 10 figures

Report number: FERMILAB-PUB-22-784, CERN-EP-DRAFT-MISC-2022-008

Journal ref: Phys. Rev. D 107, 092012 (2023)

Scalably manufactured high-index atomic layer-polymer hybrid metasurfaces for high-efficiency virtual reality metaoptics in the visible

Authors: Joohoon Kim, Junhwa Seong, Wonjoong Kim, Gun-Yeal Lee, Hongyoon Kim, Seong-Won Moon, Jaehyuck Jang, Yeseul Kim, Younghwan Yang, Dong Kyo Oh, Chanwoong Park, Hojung Choi, Hyeongjin Jeon, Kyung-Il Lee, Byoungho Lee, Heon Lee, Junsuk Rho

Abstract: Metalenses, which exhibit superior light-modulating performance with sub-micrometer-scale thicknesses, are suitable alternatives to conventional bulky refractive lenses. However, fabrication limitations, such as a high cost, low throughput, and small patterning area, hinder their mass production. Here, we demonstrate the mass production of low-cost, high-throughput, and large-aperture visible meta… ▽ More Metalenses, which exhibit superior light-modulating performance with sub-micrometer-scale thicknesses, are suitable alternatives to conventional bulky refractive lenses. However, fabrication limitations, such as a high cost, low throughput, and small patterning area, hinder their mass production. Here, we demonstrate the mass production of low-cost, high-throughput, and large-aperture visible metalenses using an argon fluoride immersion scanner and wafer-scale nanoimprint lithography. Once a 12-inch master stamp is imprinted, hundreds of centimeter-scale metalenses can be fabricated. To enhance light confinement, the printed metasurface is thinly coated with a high-index film, resulting in drastic increase of conversion efficiency. As a proof of concept, a prototype of a virtual reality device with ultralow thickness is demonstrated with the fabricated metalens. △ Less

Submitted 26 August, 2022; originally announced August 2022.

Aluminum nitride waveguide beam splitters for integrated quantum photonic circuits

Authors: Hyeong-Soon Jang, Donghwa Lee, Hyungjun Heo, Yong-Su Kim, Hyang-Tag Lim, Seung-Woo Jeon, Sung Moon, Sangin Kim, Sang-Wook Han, Hojoong Jung

Abstract: We demonstrate integrated photonic circuits for quantum devices using sputtered polycrystalline aluminum nitride (AlN) on insulator. The on-chip AlN waveguide directional couplers, which are one of the most important components in quantum photonics, are fabricated and show the output power splitting ratios from 50:50 to 99:1. The polarization beam splitters with an extinction ratio of more than 10… ▽ More We demonstrate integrated photonic circuits for quantum devices using sputtered polycrystalline aluminum nitride (AlN) on insulator. The on-chip AlN waveguide directional couplers, which are one of the most important components in quantum photonics, are fabricated and show the output power splitting ratios from 50:50 to 99:1. The polarization beam splitters with an extinction ratio of more than 10 dB are also realized from the AlN directional couplers. Using the fabricated AlN waveguide beam splitters, we observe the Hong-Ou-Mandel interference with a visibility of 91.7 +(-) 5.66 %. △ Less

Submitted 2 August, 2022; originally announced August 2022.

Comments: 9 pages, 4 figures

Reconstruction of interactions in the ProtoDUNE-SP detector with Pandora

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, Z. Ahmad, J. Ahmed, B. Aimard, F. Akbar, B. Ali-Mohammadzadeh, K. Allison, S. Alonso Monsalve, M. AlRashed, C. Alt, A. Alton, R. Alvarez, P. Amedo , et al. (1203 additional authors not shown)

Abstract: The Pandora Software Development Kit and algorithm libraries provide pattern-recognition logic essential to the reconstruction of particle interactions in liquid argon time projection chamber detectors. Pandora is the primary event reconstruction software used at ProtoDUNE-SP, a prototype for the Deep Underground Neutrino Experiment far detector. ProtoDUNE-SP, located at CERN, is exposed to a char… ▽ More The Pandora Software Development Kit and algorithm libraries provide pattern-recognition logic essential to the reconstruction of particle interactions in liquid argon time projection chamber detectors. Pandora is the primary event reconstruction software used at ProtoDUNE-SP, a prototype for the Deep Underground Neutrino Experiment far detector. ProtoDUNE-SP, located at CERN, is exposed to a charged-particle test beam. This paper gives an overview of the Pandora reconstruction algorithms and how they have been tailored for use at ProtoDUNE-SP. In complex events with numerous cosmic-ray and beam background particles, the simulated reconstruction and identification efficiency for triggered test-beam particles is above 80% for the majority of particle type and beam momentum combinations. Specifically, simulated 1 GeV/$c$ charged pions and protons are correctly reconstructed and identified with efficiencies of 86.1$\pm0.6$% and 84.1$\pm0.6$%, respectively. The efficiencies measured for test-beam data are shown to be within 5% of those predicted by the simulation. △ Less

Submitted 17 July, 2023; v1 submitted 29 June, 2022; originally announced June 2022.

Comments: 39 pages, 20 figures. Accepted version. Published version available in Eur. Phys. J. C 83, 618 (2023) https://doi.org/10.1140/epjc/s10052-023-11733-2

Report number: FERMILAB-PUB-22-488-AD-ESH-LBNF-ND-SCD, CERN-EP-DRAFT-MISC-2022-007

Journal ref: Eur. Phys. J. C 83, 618 (2023)

Separation of track- and shower-like energy deposits in ProtoDUNE-SP using a convolutional neural network

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, A. Aduszkiewicz, J. Aguilar, Z. Ahmad, J. Ahmed, B. Aimard, B. Ali-Mohammadzadeh, T. Alion, K. Allison, S. Alonso Monsalve, M. AlRashed, C. Alt, A. Alton, R. Alvarez, P. Amedo, J. Anderson , et al. (1204 additional authors not shown)

Abstract: Liquid argon time projection chamber detector technology provides high spatial and calorimetric resolutions on the charged particles traversing liquid argon. As a result, the technology has been used in a number of recent neutrino experiments, and is the technology of choice for the Deep Underground Neutrino Experiment (DUNE). In order to perform high precision measurements of neutrinos in the det… ▽ More Liquid argon time projection chamber detector technology provides high spatial and calorimetric resolutions on the charged particles traversing liquid argon. As a result, the technology has been used in a number of recent neutrino experiments, and is the technology of choice for the Deep Underground Neutrino Experiment (DUNE). In order to perform high precision measurements of neutrinos in the detector, final state particles need to be effectively identified, and their energy accurately reconstructed. This article proposes an algorithm based on a convolutional neural network to perform the classification of energy deposits and reconstructed particles as track-like or arising from electromagnetic cascades. Results from testing the algorithm on data from ProtoDUNE-SP, a prototype of the DUNE far detector, are presented. The network identifies track- and shower-like particles, as well as Michel electrons, with high efficiency. The performance of the algorithm is consistent between data and simulation. △ Less

Submitted 30 June, 2022; v1 submitted 31 March, 2022; originally announced March 2022.

Comments: 31 pages, 15 figures

Report number: FERMILAB-PUB-22-240-AD-ESH-LBNF-ND-SCD, CERN-EP-2022-077

Journal ref: Eur.Phys.J.C 82 (2022) 10, 903

Scintillation light detection in the 6-m drift-length ProtoDUNE Dual Phase liquid argon TPC

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, A. Aduszkiewicz, J. Aguilar, Z. Ahmad, J. Ahmed, B. Aimard, B. Ali-Mohammadzadeh, T. Alion, K. Allison, S. Alonso Monsalve, M. AlRashed, C. Alt, A. Alton, R. Alvarez, P. Amedo, J. Anderson , et al. (1202 additional authors not shown)

Abstract: DUNE is a dual-site experiment for long-baseline neutrino oscillation studies, neutrino astrophysics and nucleon decay searches. ProtoDUNE Dual Phase (DP) is a 6x6x6m3 liquid argon time-projection-chamber (LArTPC) that recorded cosmic-muon data at the CERN Neutrino Platform in 2019-2020 as a prototype of the DUNE Far Detector. Charged particles propagating through the LArTPC produce ionization and… ▽ More DUNE is a dual-site experiment for long-baseline neutrino oscillation studies, neutrino astrophysics and nucleon decay searches. ProtoDUNE Dual Phase (DP) is a 6x6x6m3 liquid argon time-projection-chamber (LArTPC) that recorded cosmic-muon data at the CERN Neutrino Platform in 2019-2020 as a prototype of the DUNE Far Detector. Charged particles propagating through the LArTPC produce ionization and scintillation light. The scintillation light signal in these detectors can provide the trigger for non-beam events. In addition, it adds precise timing capabilities and improves the calorimetry measurements. In ProtoDUNE-DP, scintillation and electroluminescence light produced by cosmic muons in the LArTPC is collected by photomultiplier tubes placed up to 7 m away from the ionizing track. In this paper, the ProtoDUNE-DP photon detection system performance is evaluated with a particular focus on the different wavelength shifters, such as PEN and TPB, and the use of Xe-doped LAr, considering its future use in giant LArTPCs. The scintillation light production and propagation processes are analyzed and a comparison of simulation to data is performed, improving understanding of the liquid argon properties △ Less

Submitted 3 June, 2022; v1 submitted 30 March, 2022; originally announced March 2022.

Comments: 31 pages, 29 figures

Report number: CERN-EP-DRAFT-MISC-2022-003; FERMILAB-PUB-22-242-LBNF

Plug-and-play quantum devices with efficient fiber-quantum dot interface

Authors: Woong Bae Jeon, Jong Sung Moon, Kyu-Young Kim, Young-Ho Ko, Christopher J. K. Richardson, Edo Waks, Je-Hyung Kim

Abstract: Incorporating solid-state quantum emitters into optical fiber networks enables the long-distance transmission of quantum information and the remote connection of distributed quantum nodes. However, interfacing quantum emitters with fiber optics encounters several challenges, including low coupling efficiency and stability. Here, we demonstrate a highly efficient fiber-interfacing photonic device t… ▽ More Incorporating solid-state quantum emitters into optical fiber networks enables the long-distance transmission of quantum information and the remote connection of distributed quantum nodes. However, interfacing quantum emitters with fiber optics encounters several challenges, including low coupling efficiency and stability. Here, we demonstrate a highly efficient fiber-interfacing photonic device that directly launches single photons from quantum dots into a standard FC/PC-connectorized single-mode fiber (SMF28). Optimally designed photonic structures based on hole gratings produce an ultra-narrow directional beam that matches the small numerical aperture of a single-mode fiber. A pick-and-place technique selectively integrates a single miniaturized device into the core of the fiber. Our approach realizes a plug-and-play single-photon device that does not require any optical alignment and thus guarantees long-term stability. The results thus represent a major step toward practical and reliable quantum lights across a fiber network. △ Less

Submitted 26 February, 2022; originally announced February 2022.

Comments: 19 pages, 10 figures including supporting information

Journal ref: Advanced Quantum Technologies 2200022 (2022)

Dynamic optical contrast imaging for real-time delineation of tumor resection margins using head and neck cancer as a model

Authors: Yong Hu, Shan Huang, Albert Y. Han, Seong Moon, Jeffrey F. Krane, Oscar Stafsudd, Warren Grundfest, Maie A. St. John

Abstract: Complete surgical resection of the tumor for Head and neck squamous cell carcinoma (HNSCC) remains challenging, given the devastating side effects of aggressive surgery and the anatomic proximity to vital structures. To address the clinical challenges, we introduce a wide-field, label-free imaging tool that can assist surgeons delineate tumor margins real-time. We assume that autofluorescence life… ▽ More Complete surgical resection of the tumor for Head and neck squamous cell carcinoma (HNSCC) remains challenging, given the devastating side effects of aggressive surgery and the anatomic proximity to vital structures. To address the clinical challenges, we introduce a wide-field, label-free imaging tool that can assist surgeons delineate tumor margins real-time. We assume that autofluorescence lifetime is a natural indicator of the health level of tissues, and ratio-metric measurement of the emission-decay state to the emission-peak state of excited fluorophores will enable rapid lifetime mapping of tissues. Here, we describe the principle, instrumentation, characterization of the imager and the intraoperative imaging of resected tissues from 13 patients undergoing head and neck cancer resection. 20 x 20 mm2 imaging takes 2 second/frame with a working distance of 50 mm, and characterization shows that the spatial resolution reached 70 μm and the least distinguishable fluorescence lifetime difference is 0.14 ns. Tissue imaging and Hematoxylin-Eosin stain slides comparison reveals its capability of delineating cancerous boundaries with submillimeter accuracy and a sensitivity of 91.86% and specificity of 84.38%. △ Less

Submitted 18 February, 2024; v1 submitted 14 February, 2022; originally announced February 2022.

Comments: 21 pages, 7 figures and 1 table

Nanoparticle Photo-Ejection from Liquid via Excited Plasmonic Supercavitation

Authors: Qiushi Zhang, Dezhao Huang, Seunghyun Moon, Jarrod Schiffbauer, Eungkyu Lee, Tengfei Luo

Abstract: The ability to separate miniscule solid particles (e.g., nanoparticles, NPs) from liquid is important to a wide range of applications, such as water purification, material deposition, and biomedical engineering. Such separation is usually achieved by displacing liquid via filtration or distillation. However, directly moving small particles out of liquid is difficult, especially when their sizes ap… ▽ More The ability to separate miniscule solid particles (e.g., nanoparticles, NPs) from liquid is important to a wide range of applications, such as water purification, material deposition, and biomedical engineering. Such separation is usually achieved by displacing liquid via filtration or distillation. However, directly moving small particles out of liquid is difficult, especially when their sizes approach the nanometer scale, as the capillary force on the NP at the liquid surface is too large for common body forces (e.g., optical or magnetic) to overcome. Here, we demonstrate the ability to eject metallic NPs out of liquid with a laser excitation at their surface plasmon resonance (SPR) wavelength. The laser applies an optical force on the NPs to drive them toward the liquid surface. In the meantime, the laser can also intensely heat the NP to form a nanobubble encapsulating the NP (i.e., supercavitation), which achieves the liquid-NP separation and thus eliminates the capillary force on the NP at the liquid free surface. We show that such a mechanism can expel NPs out of liquid as observed using a transient scattering experiment, which is further confirmed by molecular dynamics simulations. We also demonstrate depositing the NPs on a solid surface not in contact with the liquid. This study reveals an interesting mechanism to separate NPs from liquid and could potentially benefit separation, nanomaterials and biomedical applications. △ Less

Submitted 19 January, 2022; originally announced January 2022.

Landslide Susceptibility Modeling by Interpretable Neural Network

Authors: Khaled Youssef, Kevin Shao, Seulgi Moon, Louis-Serge Bouchard

Abstract: Landslides are notoriously difficult to predict because numerous spatially and temporally varying factors contribute to slope stability. Artificial neural networks (ANN) have been shown to improve prediction accuracy but are largely uninterpretable. Here we introduce an additive ANN optimization framework to assess landslide susceptibility, as well as dataset division and outcome interpretation te… ▽ More Landslides are notoriously difficult to predict because numerous spatially and temporally varying factors contribute to slope stability. Artificial neural networks (ANN) have been shown to improve prediction accuracy but are largely uninterpretable. Here we introduce an additive ANN optimization framework to assess landslide susceptibility, as well as dataset division and outcome interpretation techniques. We refer to our approach, which features full interpretability, high accuracy, high generalizability and low model complexity, as superposable neural network (SNN) optimization. We validate our approach by training models on landslide inventory from three different easternmost Himalaya regions. Our SNN outperformed physically-based and statistical models and achieved similar performance to state-of-the-art deep neural networks. The SNN models found the product of slope and precipitation and hillslope aspect to be important primary contributors to high landslide susceptibility, which highlights the importance of strong slope-climate couplings, along with microclimates, on landslide occurrences. △ Less

Submitted 12 March, 2023; v1 submitted 18 January, 2022; originally announced January 2022.

Comments: 79 pages (including SI section); 8 main figures; 12 supplementary figures; 9 supplementary tables

Two-photon interferences of weak coherent lights

Authors: Heonoh Kim, Osung Kwon, Han Seb Moon

Abstract: Multiphoton interference is an important phenomenon in modern quantum mechanics and experimental quantum optics, and it is fundamental for the development of quantum information science and technologies. Over the last three decades, several theoretical and experimental studies have been performed to understand the essential principles underlying such interference and to explore potential applicati… ▽ More Multiphoton interference is an important phenomenon in modern quantum mechanics and experimental quantum optics, and it is fundamental for the development of quantum information science and technologies. Over the last three decades, several theoretical and experimental studies have been performed to understand the essential principles underlying such interference and to explore potential applications. Recently, the two-photon interference (TPI) of phase-randomized weak coherent states has played a key role in the realization of long-distance quantum communication based on the use of classical light sources. In this context, we investigated TPI experiments with weak coherent pulses at the single-photon level and quantitatively analyzed the results in terms of the single- and coincidence-counting rates and one- and two-photon interference-fringe shapes. We experimentally examined the Hong-Ou-Mandel-type TPI of phase-randomized weak coherent pulses to compare the TPI effect with that of correlated photons. Further experiments were also performed with two temporally- and spatially separated weak coherent pulses. Although the observed interference results, including the results of visibility and fringe shape, can be suitably explained by classical intensity correlation, the physics underlying the TPI effect needs to be interpreted as the interference between the two-photon states at the single-photon level within the utilized interferometer. The results of this study can provide a more comprehensive understanding of the TPI of coherent light at the single-photon level. △ Less

Submitted 19 October, 2021; originally announced October 2021.

Comments: 18 pages, 10 figures

Journal ref: Scientific Reports 11, 20555 (2021)

Impact of Surface and Pore Characteristics on Fatigue Life of Laser Powder Bed Fusion Ti-6Al-4V Alloy Described by Neural Network Models

Authors: Seunghyun Moon, Ruimin Ma, Ross Attardo, Charles Tomonto, Mark Nordin, Paul Wheelock, Michael Glavicic, Maxwell Layman, Richard Billo, Tengfei Luo

Abstract: In this study, the effects of surface roughness and pore characteristics on fatigue lives of laser powder bed fusion (LPBF) Ti-6Al-4V parts were investigated. The 197 fatigue bars were printed using the same laser power but with varied scanning speeds. These actions led to variations in the geometries of microscale pores, and such variations were characterized using micro-computed tomography. To g… ▽ More In this study, the effects of surface roughness and pore characteristics on fatigue lives of laser powder bed fusion (LPBF) Ti-6Al-4V parts were investigated. The 197 fatigue bars were printed using the same laser power but with varied scanning speeds. These actions led to variations in the geometries of microscale pores, and such variations were characterized using micro-computed tomography. To generate differences in surface roughness in fatigue bars, half of the samples were grit-blasted and the other half machined. Fatigue behaviors were analyzed with respect to surface roughness and statistics of the pores. For the grit-blasted samples, the contour laser scan in the LPBF strategy led to a pore-depletion zone isolating surface and internal pores with different features. For the machined samples, where surface pores resemble internal pores, the fatigue life was highly correlated with the average pore size and projected pore area in the plane perpendicular to the stress direction. Finally, a machine learning model using a drop-out neural network (DONN) was employed to establish a link between surface and pore features to the fatigue data (logN), and good prediction accuracy was demonstrated. Besides predicting fatigue lives, the DONN can also estimate the prediction uncertainty. △ Less

Submitted 27 August, 2021; originally announced September 2021.

Systematic comparison between the generalized Lorenz equations and DNS in the two-dimensional Rayleigh-Bénard convection

Authors: Junho Park, Sungju Moon, Jaemyeong Mango Seo, Jong-Jin Baik

Abstract: The classic Lorenz equations were originally derived from the two-dimensional Rayleigh-Bénard convection system considering an idealised case with the lowest order of harmonics. Although the low-order Lorenz equations have traditionally served as a minimal model for chaotic and intermittent atmospheric motions, even the dynamics of the two-dimensional Rayleigh-Bénard convection system is not fully… ▽ More The classic Lorenz equations were originally derived from the two-dimensional Rayleigh-Bénard convection system considering an idealised case with the lowest order of harmonics. Although the low-order Lorenz equations have traditionally served as a minimal model for chaotic and intermittent atmospheric motions, even the dynamics of the two-dimensional Rayleigh-Bénard convection system is not fully represented by the Lorenz equations, and such differences have yet to be clearly identified in a systematic manner. In this paper, the convection problem is revisited through an investigation of various dynamical behaviors exhibited by a two-dimensional direct numerical simulation (DNS) and the generalized expansion of the Lorenz equations (GELE) derived by considering additional higher-order harmonics in the spectral expansions of periodic solutions. Notably, the GELE allows us to understand how nonlinear interactions among high-order modes alter the dynamical features of the Lorenz equations including fixed points, chaotic attractors, and periodic solutions. It is verified that numerical solutions of the DNS can be recovered from the solutions of GELE when we consider the system with sufficiently high-order harmonics. At the lowest order, the classic Lorenz equations are recovered from GELE. Unlike in the Lorenz equations, we observe limit tori, which are the multi-dimensional analogue of limit cycles, in the solutions of the DNS and GELE at high orders. Initial condition dependency in the DNS and Lorenz equations is also discussed. △ Less

Submitted 9 September, 2021; originally announced September 2021.

Comments: Published in Chaos

Low exposure long-baseline neutrino oscillation sensitivity of the DUNE experiment

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, D. Adams, M. Adinolfi, A. Aduszkiewicz, J. Aguilar, Z. Ahmad, J. Ahmed, B. Aimard, B. Ali-Mohammadzadeh, T. Alion, K. Allison, S. Alonso Monsalve, M. AlRashed, C. Alt, A. Alton, P. Amedo, J. Anderson, C. Andreopoulos, M. Andreotti , et al. (1132 additional authors not shown)

Abstract: The Deep Underground Neutrino Experiment (DUNE) will produce world-leading neutrino oscillation measurements over the lifetime of the experiment. In this work, we explore DUNE's sensitivity to observe charge-parity violation (CPV) in the neutrino sector, and to resolve the mass ordering, for exposures of up to 100 kiloton-megawatt-years (kt-MW-yr). The analysis includes detailed uncertainties on t… ▽ More The Deep Underground Neutrino Experiment (DUNE) will produce world-leading neutrino oscillation measurements over the lifetime of the experiment. In this work, we explore DUNE's sensitivity to observe charge-parity violation (CPV) in the neutrino sector, and to resolve the mass ordering, for exposures of up to 100 kiloton-megawatt-years (kt-MW-yr). The analysis includes detailed uncertainties on the flux prediction, the neutrino interaction model, and detector effects. We demonstrate that DUNE will be able to unambiguously resolve the neutrino mass ordering at a 3$σ$ (5$σ$) level, with a 66 (100) kt-MW-yr far detector exposure, and has the ability to make strong statements at significantly shorter exposures depending on the true value of other oscillation parameters. We also show that DUNE has the potential to make a robust measurement of CPV at a 3$σ$ level with a 100 kt-MW-yr exposure for the maximally CP-violating values $δ_{\rm CP}} = \pmπ/2$. Additionally, the dependence of DUNE's sensitivity on the exposure taken in neutrino-enhanced and antineutrino-enhanced running is discussed. An equal fraction of exposure taken in each beam mode is found to be close to optimal when considered over the entire space of interest. △ Less

Submitted 3 September, 2021; originally announced September 2021.

Report number: FERMILAB-PUB-21-391-ND

Plasmonic Nanobubbles: A Perspective

Authors: Seunghyun Moon, Qiushi Zhang, Zhihao Xu, Dezhao Huang, Seongmin Kim, Jarrod Schiffbauer, Eungkyu Lee, Tengfei Luo

Abstract: The field of plasmonic nanobubbles, referring to bubbles generated around nanoparticles due to plasmonic heating, is growing rapidly in recent years. Theoretical, simulation and experimental studies have been reported to reveal the fundamental physics related to this nanoscale multi-physics phenomenon. Using plasmonic nanobubbles for applications is in the early stage but progressing. In this arti… ▽ More The field of plasmonic nanobubbles, referring to bubbles generated around nanoparticles due to plasmonic heating, is growing rapidly in recent years. Theoretical, simulation and experimental studies have been reported to reveal the fundamental physics related to this nanoscale multi-physics phenomenon. Using plasmonic nanobubbles for applications is in the early stage but progressing. In this article, we briefly review the current state of this research field and give our perspectives on the research needs in the theoretical, simulation and experimental fronts. We also give our perspectives on how the fundamental understanding can be applied to more practical applications. △ Less

Submitted 17 August, 2021; originally announced August 2021.

Comments: 28 pages, 4 figures

Design, construction and operation of the ProtoDUNE-SP Liquid Argon TPC

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, D. Adams, M. Adinolfi, A. Aduszkiewicz, J. Aguilar, Z. Ahmad, J. Ahmed, B. Ali-Mohammadzadeh, T. Alion, K. Allison, S. Alonso Monsalve, M. Alrashed, C. Alt, A. Alton, P. Amedo, J. Anderson, C. Andreopoulos, M. Andreotti, M. P. Andrews , et al. (1158 additional authors not shown)

Abstract: The ProtoDUNE-SP detector is a single-phase liquid argon time projection chamber (LArTPC) that was constructed and operated in the CERN North Area at the end of the H4 beamline. This detector is a prototype for the first far detector module of the Deep Underground Neutrino Experiment (DUNE), which will be constructed at the Sandford Underground Research Facility (SURF) in Lead, South Dakota, USA.… ▽ More The ProtoDUNE-SP detector is a single-phase liquid argon time projection chamber (LArTPC) that was constructed and operated in the CERN North Area at the end of the H4 beamline. This detector is a prototype for the first far detector module of the Deep Underground Neutrino Experiment (DUNE), which will be constructed at the Sandford Underground Research Facility (SURF) in Lead, South Dakota, USA. The ProtoDUNE-SP detector incorporates full-size components as designed for DUNE and has an active volume of $7\times 6\times 7.2$~m$^3$. The H4 beam delivers incident particles with well-measured momenta and high-purity particle identification. ProtoDUNE-SP's successful operation between 2018 and 2020 demonstrates the effectiveness of the single-phase far detector design. This paper describes the design, construction, assembly and operation of the detector components. △ Less

Submitted 23 September, 2021; v1 submitted 4 August, 2021; originally announced August 2021.

Time-resolved two-photon interference of weak coherent pulses

Authors: Heonoh Kim, Osung Kwon, Han Seb Moon

Abstract: The observation of the Hong-Ou-Mandel (HOM)-type two-photon interference (TPI) has played an important role in the development of photonic quantum technologies. The time-resolved coincidence-detection technique has been effectively used to identify and characterize the TPI phenomena of long-coherence optical fields. Here, we report on the experimental demonstration of the TPI of two phase-randomiz… ▽ More The observation of the Hong-Ou-Mandel (HOM)-type two-photon interference (TPI) has played an important role in the development of photonic quantum technologies. The time-resolved coincidence-detection technique has been effectively used to identify and characterize the TPI phenomena of long-coherence optical fields. Here, we report on the experimental demonstration of the TPI of two phase-randomized weak coherent pulses with time-resolved coincidence detection. The mutual coherence time between the two weak coherent lights is determined by applying a frequency noise to one of the two interfering lights. We analyze the HOM-type TPI-fringe visibility according to the ratio of the coherence time to the pulse duration. △ Less

Submitted 4 June, 2021; originally announced June 2021.

Comments: 6 pages, 4 figures, Accepted for publication in Appl. Phys. Lett

Journal ref: Appl. Phys. Lett. 118, 244001 (2021)

Hong-Ou-Mandel interference of two independent continuous-wave coherent photons

Authors: Heonoh Kin, Danbi Kim, Jiho Park, Han Seb Moon

Abstract: Interference between two completely independent photons lies at the heart of many photonic quantum information applications such as quantum repeaters, teleportation, and quantum key distribution. Here, we report the observation of Hong-Ou-Mandel (HOM) interference with two independent continuous-wave coherent light sources that are neither synchronized nor share any common reference. To prepare hi… ▽ More Interference between two completely independent photons lies at the heart of many photonic quantum information applications such as quantum repeaters, teleportation, and quantum key distribution. Here, we report the observation of Hong-Ou-Mandel (HOM) interference with two independent continuous-wave coherent light sources that are neither synchronized nor share any common reference. To prepare highly indistinguishable photons from two independent laser sources, we employ high-precision frequency-stabilization techniques using the 5S1/2(F=3)-5P1/2(F'=3) transition line of 85Rb atoms. We successfully observe a HOM interference fringe with two independent continuous-wave coherent photons originating from either the frequency-locked and frequency-modulated lasers. An interference fringe involving two-photon beating is also observed when the frequency difference between the two interfering photons is beyond the spectral bandwidth of the individual coherent photons. We carry out further experiments to verify the robustness of the source preparation regardless of the separation distance between the two independent photon sources. △ Less

Submitted 4 June, 2021; originally announced June 2021.

Comments: 6 gates, 5 figures

Journal ref: Photon. Res. 8(9), 1491 (2020)

Test beam characterization of sensor prototypes for the CMS Barrel MIP Timing Detector

Authors: R. Abbott, A. Abreu, F. Addesa, M. Alhusseini, T. Anderson, Y. Andreev, A. Apresyan, R. Arcidiacono, M. Arenton, E. Auffray, D. Bastos, L. A. T. Bauerdick, R. Bellan, M. Bellato, A. Benaglia, M. Benettoni, R. Bertoni, M. Besancon, S. Bharthuar, A. Bornheim, E. Brücken, J. N. Butler, C. Campagnari, M. Campana, R. Carlin , et al. (174 additional authors not shown)

Abstract: The MIP Timing Detector will provide additional timing capabilities for detection of minimum ionizing particles (MIPs) at CMS during the High Luminosity LHC era, improving event reconstruction and pileup rejection. The central portion of the detector, the Barrel Timing Layer (BTL), will be instrumented with LYSO:Ce crystals and Silicon Photomultipliers (SiPMs) providing a time resolution of about… ▽ More The MIP Timing Detector will provide additional timing capabilities for detection of minimum ionizing particles (MIPs) at CMS during the High Luminosity LHC era, improving event reconstruction and pileup rejection. The central portion of the detector, the Barrel Timing Layer (BTL), will be instrumented with LYSO:Ce crystals and Silicon Photomultipliers (SiPMs) providing a time resolution of about 30 ps at the beginning of operation, and degrading to 50-60 ps at the end of the detector lifetime as a result of radiation damage. In this work, we present the results obtained using a 120 GeV proton beam at the Fermilab Test Beam Facility to measure the time resolution of unirradiated sensors. A proof-of-concept of the sensor layout proposed for the barrel region of the MTD, consisting of elongated crystal bars with dimensions of about 3 x 3 x 57 mm$^3$ and with double-ended SiPM readout, is demonstrated. This design provides a robust time measurement independent of the impact point of the MIP along the crystal bar. We tested LYSO:Ce bars of different thickness (2, 3, 4 mm) with a geometry close to the reference design and coupled to SiPMs manufactured by Hamamatsu and Fondazione Bruno Kessler. The various aspects influencing the timing performance such as the crystal thickness, properties of the SiPMs (e.g. photon detection efficiency), and impact angle of the MIP are studied. A time resolution of about 28 ps is measured for MIPs crossing a 3 mm thick crystal bar, corresponding to an MPV energy deposition of 2.6 MeV, and of 22 ps for the 4.2 MeV MPV energy deposition expected in the BTL, matching the detector performance target for unirradiated devices. △ Less

Submitted 16 July, 2021; v1 submitted 15 April, 2021; originally announced April 2021.

Journal ref: Journal of Instrumentation, Volume 16, July 2021

High resolution, High contrast optical interface for defect qubits

Authors: Jong Sung Moon, Haneul Lee, Jin Hee Lee, Woong Bae Jeon, Dowon Lee, Junghyun Lee, Seoyoung Paik, Sang-Wook Han, Rolf Reuter, Andrej Denisenko, Joerg Wrachtrup, Sang-Yun Lee, Je-Hyung Kim

Abstract: Point defects in crystals provide important building blocks for quantum applications. To initialize, control, and read-out their quantum states, an efficient optical interface for addressing defects with photons is required. However, conventional confocal fluorescence microscopy with high refractive index crystals has limited photon collection efficiency and spatial resolution. Here, we demonstrat… ▽ More Point defects in crystals provide important building blocks for quantum applications. To initialize, control, and read-out their quantum states, an efficient optical interface for addressing defects with photons is required. However, conventional confocal fluorescence microscopy with high refractive index crystals has limited photon collection efficiency and spatial resolution. Here, we demonstrate high resolution, high contrast imaging for defects qubits using microsphere-assisted confocal microscopy. A microsphere provides an excellent optical interface for point defects with a magnified virtual image that improves spatial resolution up to ~$λ$/5 as well as an optical signal-to-noise ratio by four times. These features enable individual optical addressing of single photons and single spins of spatially-unresolved defects in conventional confocal microscopy with improved signal contrast. The combined optical tweezers show the possibility of positioning or scanning the microspheres for deterministic coupling and wide-field imaging of defects. The approach does not require any complicated fabrication and additional optical system but uses simple micro-optics off-the-shelf. From these distinctive advantages of the microspheres, our approach can provide an efficient way for imaging and addressing closely-spaced defects with higher resolution and sensitivity. △ Less

Submitted 13 February, 2021; originally announced February 2021.

Comments: 20 pages, 5 figures

Journal ref: ACS Photonics 8, 2642 (2021)

A tissue-fraction estimation-based segmentation method for quantitative dopamine transporter SPECT

Authors: Ziping Liu, Hae Sol Moon, Zekun Li, Richard Laforest, Joel S. Perlmutter, Scott A. Norris, Abhinav K. Jha

Abstract: Quantitative measures of dopamine transporter (DaT) uptake in caudate, putamen, and globus pallidus (GP) have potential as biomarkers for measuring the severity of Parkinson disease. Reliable quantification of this uptake requires accurate segmentation of the considered regions. However, segmentation of these regions from DaT-SPECT images is challenging, a major reason being partial-volume effects… ▽ More Quantitative measures of dopamine transporter (DaT) uptake in caudate, putamen, and globus pallidus (GP) have potential as biomarkers for measuring the severity of Parkinson disease. Reliable quantification of this uptake requires accurate segmentation of the considered regions. However, segmentation of these regions from DaT-SPECT images is challenging, a major reason being partial-volume effects (PVEs), which arise from the limited system resolution and reconstruction of images over finite-sized voxel grids. The latter leads to tissue-fraction effects (TFEs). Thus, there is an important need for methods that can account for the PVEs, including the TFEs, and accurately segment DaT-SPECT images. The purpose of this study is to design and objectively evaluate a fully automated tissue-fraction estimation-based segmentation method that segments the caudate, putamen, and GP from DaT-SPECT images. The proposed method estimates the posterior mean of the fractional volumes occupied by the caudate, putamen, and GP within each voxel of a 3-D DaT-SPECT image. The estimate is obtained by minimizing a cost function based on the binary cross-entropy loss between the true and estimated fractional volumes over a population of SPECT images. Evaluations using clinically guided highly realistic simulation studies show that the proposed method accurately segmented the caudate, putamen, and GP with high mean Dice similarity coefficients ~ 0.80 and significantly outperformed (p < 0.01) all other considered segmentation methods. Further, objective evaluation of the proposed method on the task of quantifying regional uptake shows that the method yielded reliable quantification with low ensemble normalized root mean square error (NRMSE) < 20% for all the considered regions. The results motivate further evaluation of the method with physical-phantom and patient studies. △ Less

Submitted 2 June, 2022; v1 submitted 17 January, 2021; originally announced January 2021.

Supernova Model Discrimination with Hyper-Kamiokande

Authors: Hyper-Kamiokande Collaboration, :, K. Abe, P. Adrich, H. Aihara, R. Akutsu, I. Alekseev, A. Ali, F. Ameli, I. Anghel, L. H. V. Anthony, M. Antonova, A. Araya, Y. Asaoka, Y. Ashida, V. Aushev, F. Ballester, I. Bandac, M. Barbi, G. J. Barker, G. Barr, M. Batkiewicz-Kwasniak, M. Bellato, V. Berardi, M. Bergevin , et al. (478 additional authors not shown)

Abstract: Core-collapse supernovae are among the most magnificent events in the observable universe. They produce many of the chemical elements necessary for life to exist and their remnants -- neutron stars and black holes -- are interesting astrophysical objects in their own right. However, despite millennia of observations and almost a century of astrophysical study, the explosion mechanism of core-colla… ▽ More Core-collapse supernovae are among the most magnificent events in the observable universe. They produce many of the chemical elements necessary for life to exist and their remnants -- neutron stars and black holes -- are interesting astrophysical objects in their own right. However, despite millennia of observations and almost a century of astrophysical study, the explosion mechanism of core-collapse supernovae is not yet well understood. Hyper-Kamiokande is a next-generation neutrino detector that will be able to observe the neutrino flux from the next galactic core-collapse supernova in unprecedented detail. We focus on the first 500 ms of the neutrino burst, corresponding to the accretion phase, and use a newly-developed, high-precision supernova event generator to simulate Hyper-Kamiokande's response to five different supernova models. We show that Hyper-Kamiokande will be able to distinguish between these models with high accuracy for a supernova at a distance of up to 100 kpc. Once the next galactic supernova happens, this ability will be a powerful tool for guiding simulations towards a precise reproduction of the explosion mechanism observed in nature. △ Less

Submitted 20 July, 2021; v1 submitted 13 January, 2021; originally announced January 2021.

Comments: 21 pages, 7 figures. Article based on thesis published as arXiv:2002.01649. v2: added references and some explanations in response to reviewer comments

Journal ref: Astrophys.J. 916 (2021) 15

Learning emergent PDEs in a learned emergent space

Authors: Felix P. Kemeth, Tom Bertalan, Thomas Thiem, Felix Dietrich, Sung Joon Moon, Carlo R. Laing, Ioannis G. Kevrekidis

Abstract: We extract data-driven, intrinsic spatial coordinates from observations of the dynamics of large systems of coupled heterogeneous agents. These coordinates then serve as an emergent space in which to learn predictive models in the form of partial differential equations (PDEs) for the collective description of the coupled-agent system. They play the role of the independent spatial variables in this… ▽ More We extract data-driven, intrinsic spatial coordinates from observations of the dynamics of large systems of coupled heterogeneous agents. These coordinates then serve as an emergent space in which to learn predictive models in the form of partial differential equations (PDEs) for the collective description of the coupled-agent system. They play the role of the independent spatial variables in this PDE (as opposed to the dependent, possibly also data-driven, state variables). This leads to an alternative description of the dynamics, local in these emergent coordinates, thus facilitating an alternative modeling path for complex coupled-agent systems. We illustrate this approach on a system where each agent is a limit cycle oscillator (a so-called Stuart-Landau oscillator); the agents are heterogeneous (they each have a different intrinsic frequency $ω$) and are coupled through the ensemble average of their respective variables. After fast initial transients, we show that the collective dynamics on a slow manifold can be approximated through a learned model based on local "spatial" partial derivatives in the emergent coordinates. The model is then used for prediction in time, as well as to capture collective bifurcations when system parameters vary. The proposed approach thus integrates the automatic, data-driven extraction of emergent space coordinates parametrizing the agent dynamics, with machine-learning assisted identification of an "emergent PDE" description of the dynamics in this parametrization. △ Less

Submitted 23 December, 2020; originally announced December 2020.

Mitigation of Space-Charge-Driven Resonance and Instability in High-Intensity Linear Accelerators via Beam Spinning

Authors: Yoo-Lim Cheon, Seok-Ho Moon, Moses Chung, Dong-O Jeon

Abstract: For modern high-intensity linear accelerators, the well-known envelope instability and recently reported fourth-order particle resonance impose a fundamental operational limit (i.e., zero-current phase advance should be less than 90 deg). Motivated by the stability of spinning flying objects, we propose a novel approach of using spinning beams to surpass this limit. We discovered that spinning bea… ▽ More For modern high-intensity linear accelerators, the well-known envelope instability and recently reported fourth-order particle resonance impose a fundamental operational limit (i.e., zero-current phase advance should be less than 90 deg). Motivated by the stability of spinning flying objects, we propose a novel approach of using spinning beams to surpass this limit. We discovered that spinning beams have an intrinsic characteristic that can suppress the impact of the fourth-order resonance on emittance growth and the associated envelope instability. △ Less

Submitted 1 July, 2021; v1 submitted 27 October, 2020; originally announced October 2020.

Pulse Shape Discrimination of Fast Neutron Background using Convolutional Neural Network for NEOS II

Authors: NEOS II Collaboration, Y. Jeong, B. Y. Han, E. J. Jeon, H. S. Jo, D. K. Kim, J. Y. Kim, J. G. Kim, Y. D. Kim, Y. J. Ko, H. M. Lee, M. H. Lee, J. Lee, C. S. Moon, Y. M. Oh, H. K. Park, K. S. Park, S. H. Seo, K. Siyeon, G. M. Sun, Y. S. Yoon, I. Yu

Abstract: Pulse shape discrimination plays a key role in improving the signal-to-background ratio in NEOS analysis by removing fast neutrons. Identifying particles by looking at the tail of the waveform has been an effective and plausible approach for pulse shape discrimination, but has the limitation in sorting low energy particles. As a good alternative, the convolutional neural network can scan the entir… ▽ More Pulse shape discrimination plays a key role in improving the signal-to-background ratio in NEOS analysis by removing fast neutrons. Identifying particles by looking at the tail of the waveform has been an effective and plausible approach for pulse shape discrimination, but has the limitation in sorting low energy particles. As a good alternative, the convolutional neural network can scan the entire waveform as they are to recognize the characteristics of the pulse and perform shape classification of NEOS data. This network provides a powerful identification tool for all energy ranges and helps to search unprecedented phenomena of low-energy, a few MeV or less, neutrinos. △ Less

Submitted 28 September, 2020; originally announced September 2020.

Comments: 7 figures

The Hyper-Kamiokande Experiment -- Snowmass LOI

Authors: Hyper-Kamiokande Collaboration, :, K. Abe, P. Adrich, H. Aihara, R. Akutsu, I. Alekseev, A. Ali, F. Ameli, L. H. V. Anthony, A. Araya, Y. Asaoka, V. Aushev, I. Bandac, M. Barbi, G. Barr, M. Batkiewicz-Kwasniak, M. Bellato, V. Berardi, L. Bernard, E. Bernardini, L. Berns, S. Bhadra, J. Bian, A. Blanchet , et al. (366 additional authors not shown)

Abstract: Hyper-Kamiokande is the next generation underground water Cherenkov detector that builds on the highly successful Super-Kamiokande experiment. The detector which has an 8.4~times larger effective volume than its predecessor will be located along the T2K neutrino beamline and utilize an upgraded J-PARC beam with 2.6~times beam power. Hyper-K's low energy threshold combined with the very large fiduc… ▽ More Hyper-Kamiokande is the next generation underground water Cherenkov detector that builds on the highly successful Super-Kamiokande experiment. The detector which has an 8.4~times larger effective volume than its predecessor will be located along the T2K neutrino beamline and utilize an upgraded J-PARC beam with 2.6~times beam power. Hyper-K's low energy threshold combined with the very large fiducial volume make the detector unique, that is expected to acquire an unprecedented exposure of 3.8~Mton$\cdot$year over a period of 20~years of operation. Hyper-Kamiokande combines an extremely diverse science program including nucleon decays, long-baseline neutrino oscillations, atmospheric neutrinos, and neutrinos from astrophysical origins. The scientific scope of this program is highly complementary to liquid-argon detectors for example in sensitivity to nucleon decay channels or supernova detection modes. Hyper-Kamiokande construction has started in early 2020 and the experiment is expected to start operations in 2027. The Hyper-Kamiokande collaboration is presently being formed amongst groups from 19 countries including the United States, whose community has a long history of making significant contributions to the neutrino physics program in Japan. US physicists have played leading roles in the Kamiokande, Super-Kamiokande, EGADS, K2K, and T2K programs. △ Less

Submitted 1 September, 2020; originally announced September 2020.

Comments: 6 pages, prepared as Snowmass2021 LOI

Real-World Data Analysis of Implantable Cardioverter Defibrillator (ICD) in Patients with Hypertrophic Cardiomyopathy (HCM)

Authors: Sungrim Moon, Andrew Wen, Christopher G. Scott, Michael J. Ackerman, Jeffrey B. Geske, Peter A. Noseworthy, Steve R Ommen, Jane L Shellum, Hongfang Liu, Rick A. Nishimura

Abstract: Background: One of the common causes of sudden cardiac death (SCD) in young people is hypertrophic cardiomyopathy (HCM) and the primary prevention of SCD is with an implantable cardioverter defibrillators (ICD). Concerning the incidence of appropriate ICD therapy and the complications associated with ICD implantation and discharge, patients with implanted ICDs are closely monitored and interrogati… ▽ More Background: One of the common causes of sudden cardiac death (SCD) in young people is hypertrophic cardiomyopathy (HCM) and the primary prevention of SCD is with an implantable cardioverter defibrillators (ICD). Concerning the incidence of appropriate ICD therapy and the complications associated with ICD implantation and discharge, patients with implanted ICDs are closely monitored and interrogation reports are generated from clinical consultations. Methods: In this study, we compared the performance of structured device data and unstructured interrogation reports for extracting information of ICD therapy and heart rhythm. We sampled 687 reports with a gold standard generated through manual chart review. A rule-based natural language processing (NLP) system was developed using 480 reports and the information in the corresponding device data was aggregated for the task. We compared the performance of the NLP system with information aggregated from structured device data using the remaining 207 reports. Results: The rule-based NLP system achieved F-measure of 0.92 and 0.98 for ICD therapy and heart rhythm while the performance of aggregating device data was significantly lower with F-measure of 0.78 and 0.45 respectively. Limitations of using only structured device data include no differentiation of real events from management events, data availability, and disparate perspectives of vendor and data granularity while using interrogation reports needs to overcome non-representative keyword/pattern and contextual errors. Conclusions: Extracting phenotyping information from data generated in real-world requires the incorporation of medical knowledge. It is essential to analyze, compare, and harmonize multiple data sources for real-world evidence generation. △ Less

Submitted 22 January, 2020; originally announced January 2020.

Generalized group-based epidemic model for spreading processes on networks: GgroupEM

Authors: Sifat Afroj Moon, Faryad Darabi Sahneh, Caterina Scoglio

Abstract: We develop a generalized group-based epidemic model (GgroupEM) framework for any compartmental epidemic model (for example; susceptible-infected-susceptible, susceptible-infected-recovered, susceptible-exposed-infected-recovered). Here, a group consists of a collection of individual nodes. This model can be used to understand the important dynamic characteristics of a stochastic epidemic spreading… ▽ More We develop a generalized group-based epidemic model (GgroupEM) framework for any compartmental epidemic model (for example; susceptible-infected-susceptible, susceptible-infected-recovered, susceptible-exposed-infected-recovered). Here, a group consists of a collection of individual nodes. This model can be used to understand the important dynamic characteristics of a stochastic epidemic spreading over very large complex networks, being informative about the state of groups. Aggregating nodes by groups, the state space becomes smaller than the individual-based approach at the cost of aggregation error, which is strongly bounded by the isoperimetric inequality. We also develop a mean-field approximation of this framework to further reduce the state-space size. Finally, we extend the GgroupEM to multilayer networks. Since the group-based framework is computationally less expensive and faster than an individual-based framework, then this framework is useful when the simulation time is important. △ Less

Submitted 16 August, 2019; originally announced August 2019.

A Fast Poisson Solver of Second-Order Accuracy for Isolated Systems in Three-Dimensional Cartesian and Cylindrical Coordinates

Authors: Sanghyuk Moon, Woong-Tae Kim, Eve C. Ostriker

Abstract: We present an accurate and efficient method to calculate the gravitational potential of an isolated system in three-dimensional Cartesian and cylindrical coordinates subject to vacuum (open) boundary conditions. Our method consists of two parts: an interior solver and a boundary solver. The interior solver adopts an eigenfunction expansion method together with a tridiagonal matrix solver to solve… ▽ More We present an accurate and efficient method to calculate the gravitational potential of an isolated system in three-dimensional Cartesian and cylindrical coordinates subject to vacuum (open) boundary conditions. Our method consists of two parts: an interior solver and a boundary solver. The interior solver adopts an eigenfunction expansion method together with a tridiagonal matrix solver to solve the Poisson equation subject to the zero boundary condition. The boundary solver employs James's method to calculate the boundary potential due to the screening charges required to keep the zero boundary condition for the interior solver. A full computation of gravitational potential requires running the interior solver twice and the boundary solver once. We develop a method to compute the discrete Green's function in cylindrical coordinates, which is an integral part of the James algorithm to maintain second-order accuracy. We implement our method in the {\tt Athena++} magnetohydrodynamics code, and perform various tests to check that our solver is second-order accurate and exhibits good parallel performance. △ Less

Submitted 22 February, 2019; originally announced February 2019.

Comments: 24 pages, 13 figures; accepted for publication in ApJS

Journal ref: ApJS 241 24 (2019)

Non-Hermiticity and conservation of orthogonal relation in dielectric microcavity

Authors: Kyu-Won Park, Songky Moon, Hyunseok Jeong, Jaewan Kim, Kabgyun Jeong

Abstract: Non-Hermitian properties of open quantum systems and their applications have attracted much attention in recent years. While most of the studies focus on the characteristic nature of non-Hermitian systems, here we focus on the following issue: A non-Hermitian system can be a subsystem of a Hermitian system as one can clearly see in Feshbach projective operator (FPO) formalism. In this case, the or… ▽ More Non-Hermitian properties of open quantum systems and their applications have attracted much attention in recent years. While most of the studies focus on the characteristic nature of non-Hermitian systems, here we focus on the following issue: A non-Hermitian system can be a subsystem of a Hermitian system as one can clearly see in Feshbach projective operator (FPO) formalism. In this case, the orthogonality of the eigenvectors of the total (Hermitian) system must be sustained, despite the eigenvectors of the subsystem (non-Hermitian) satisfy the bi-orthogonal condition. Therefore, one can predict that there must exist some remarkable processes that relate the non-Hermitian subsystem and the rest part, and ultimately preserve the Hermiticity of the total system. In this paper, we study such processes in open elliptical microcavities. The inner part of the cavity is a non-Hermitian system, and the outer part is the coupled bath in FPO formalism. We investigate the correlation between the inner- and the outer-part behaviors associated with the avoided resonance crossings (ARCs), and analyze the results in terms of a trade-off between the relative difference of self-energies and collective Lamb shifts. These results come from the conservation of the orthogonality in the total Hermitian quantum system. △ Less

Submitted 17 July, 2018; v1 submitted 19 February, 2018; originally announced February 2018.

Comments: 11 pages, 5 figures

Journal ref: J. Phys. Commun. 2, 075007 (2018)

A Model for the Global Quantum Efficiency for a TPB-based Wavelength-Shifting System used with Photomultiplier Tubes in Liquid Argon in MicroBooNE

Authors: S. F. Pate, T. Wester, L. Bugel, J. Conrad, E. Henderson, B. J. P. Jones, A. I. L. McLean, J. S. Moon, M. Toups, T. Wongjirad

Abstract: We present a model for the Global Quantum Efficiency (GQE) of the MicroBooNE optical units. An optical unit consists of a flat, circular acrylic plate, coated with tetraphenyl butadiene (TPB), positioned near the photocathode of a 20.2-cm diameter photomultiplier tube. The plate converts the ultra-violet scintillation photons from liquid argon into visible-spectrum photons to which the cryogenic p… ▽ More We present a model for the Global Quantum Efficiency (GQE) of the MicroBooNE optical units. An optical unit consists of a flat, circular acrylic plate, coated with tetraphenyl butadiene (TPB), positioned near the photocathode of a 20.2-cm diameter photomultiplier tube. The plate converts the ultra-violet scintillation photons from liquid argon into visible-spectrum photons to which the cryogenic phototubes are sensitive. The GQE is the convolution of the efficiency of the plates that convert the 128 nm scintillation light from liquid argon to visible light, the efficiency of the shifted light to reach the photocathode, and the efficiency of the cryogenic photomultiplier tube. We develop a GEANT4-based model of the optical unit, based on first principles, and obtain the range of probable values for the expected number of detected photoelectrons ($N_{\rm PE}$) given the known systematic errors on the simulation parameters. We compare results from four measurements of the $N_{\rm PE}$ determined using alpha-particle sources placed at two distances from a TPB-coated plate in a liquid argon cryostat test stand. We also directly measured the radial dependence of the quantum efficiency, and find that this has the same shape as predicted by our model. Our model results in a GQE of $0.0055\pm0.0009$ for the MicroBooNE optical units. While the information shown here is MicroBooNE specific, the approach to the model and the collection of simulation parameters will be widely applicable to many liquid-argon-based light collection systems. △ Less

Submitted 5 March, 2018; v1 submitted 3 November, 2017; originally announced November 2017.

Comments: final version accepted for publication by JINST

Journal ref: Journal of Instrumentation, Volume 13, P02034, 2018

Physics Potentials with the Second Hyper-Kamiokande Detector in Korea

Authors: Hyper-Kamiokande proto-collaboration, :, K. Abe, Ke. Abe, S. H. Ahn, H. Aihara, A. Aimi, R. Akutsu, C. Andreopoulos, I. Anghel, L. H. V. Anthony, M. Antonova, Y. Ashida, V. Aushev, M. Barbi, G. J. Barker, G. Barr, P. Beltrame, V. Berardi, M. Bergevin, S. Berkman, L. Berns, T. Berry, S. Bhadra, D. Bravo-Bergu no , et al. (331 additional authors not shown)

Abstract: Hyper-Kamiokande consists of two identical water-Cherenkov detectors of total 520~kt with the first one in Japan at 295~km from the J-PARC neutrino beam with 2.5$^{\textrm{o}}$ Off-Axis Angles (OAAs), and the second one possibly in Korea in a later stage. Having the second detector in Korea would benefit almost all areas of neutrino oscillation physics mainly due to longer baselines. There are sev… ▽ More Hyper-Kamiokande consists of two identical water-Cherenkov detectors of total 520~kt with the first one in Japan at 295~km from the J-PARC neutrino beam with 2.5$^{\textrm{o}}$ Off-Axis Angles (OAAs), and the second one possibly in Korea in a later stage. Having the second detector in Korea would benefit almost all areas of neutrino oscillation physics mainly due to longer baselines. There are several candidate sites in Korea with baselines of 1,000$\sim$1,300~km and OAAs of 1$^{\textrm{o}}$$\sim$3$^{\textrm{o}}$. We conducted sensitivity studies on neutrino oscillation physics for a second detector, either in Japan (JD $\times$ 2) or Korea (JD + KD) and compared the results with a single detector in Japan. Leptonic CP violation sensitivity is improved especially when the CP is non-maximally violated. The larger matter effect at Korean candidate sites significantly enhances sensitivities to non-standard interactions of neutrinos and mass ordering determination. Current studies indicate the best sensitivity is obtained at Mt. Bisul (1,088~km baseline, $1.3^\circ$ OAA). Thanks to a larger (1,000~m) overburden than the first detector site, clear improvements to sensitivities for solar and supernova relic neutrino searches are expected. △ Less

Submitted 26 March, 2018; v1 submitted 18 November, 2016; originally announced November 2016.

Comments: 102 pages, 49 figures. Accepted by PTEP

Journal ref: Prog Theor Exp Phys (2018)

Compressed sensing and sparsity in photoacoustic tomography

Authors: Markus Haltmeier, Thomas Berer, Sunghwan Moon, Peter Burgholzer

Abstract: Increasing the imaging speed is a central aim in photoacoustic tomography. This issue is especially important in the case of sequential scanning approaches as applied for most existing optical detection schemes. In this work we address this issue using techniques of compressed sensing. We demonstrate, that the number of measurements can significantly be reduced by allowing general linear measureme… ▽ More Increasing the imaging speed is a central aim in photoacoustic tomography. This issue is especially important in the case of sequential scanning approaches as applied for most existing optical detection schemes. In this work we address this issue using techniques of compressed sensing. We demonstrate, that the number of measurements can significantly be reduced by allowing general linear measurements instead of point-wise pressure values. A main requirement in compressed sensing is the sparsity of the unknowns to be recovered. For that purpose we develop the concept of sparsifying temporal transforms for three-dimensional photoacoustic tomography. We establish a two-stage algorithm that recovers the complete pressure Signals in a first step and then applies a standard reconstruction algorithm such as back-projection. This yields a novel reconstruction method with much lower complexity than existing compressed sensing approaches for photoacoustic tomography. Reconstruction results for simulated and for experimental data verify that the proposed compressed sensing scheme allows to significantly reducing the number of spatial measurements without reducing the spatial resolution. △ Less

Submitted 4 August, 2016; v1 submitted 30 May, 2016; originally announced May 2016.

Comments: 24 pages; 11 figures

Three-photon coherence in a ladder-type atomic system

Authors: Heung-Ryoul Noh, Han Seb Moon

Abstract: We present a theoretical study of three-photon electromagnetically induced absorption for a ladder-type three-level atomic system. A probe beam was tuned to the lower line and two counter-propagating, linearly polarized coupling beams were tuned to the upper line. The system can be modeled with a three- (or five-) level scheme when the polarization directions of the coupling beams are parallel (or… ▽ More We present a theoretical study of three-photon electromagnetically induced absorption for a ladder-type three-level atomic system. A probe beam was tuned to the lower line and two counter-propagating, linearly polarized coupling beams were tuned to the upper line. The system can be modeled with a three- (or five-) level scheme when the polarization directions of the coupling beams are parallel (or perpendicular). By calculating the absorption coefficients analytically for the two schemes, we found that the corresponding absorption coefficients were identical except for different transition strengths, and that the primitive scheme embedded in those schemes was a simple four-level scheme. △ Less

Submitted 31 July, 2015; originally announced July 2015.

Journal ref: Phys. Rev. A 92, 013807 (2015)

Highly efficient source for frequency-entangled photon pairs generated in a 3rd order periodically poled MgO-doped stoichiometric LiTaO3 crystal

Authors: Heonoh Kim, Hee Jung Lee, Sang Min Lee, Han Seb Moon

Abstract: We present a highly efficient source for discrete frequency-entangled photon pairs based on spontaneous parametric down-conversion using 3rd order type-0 quasi-phase matching in a periodically poled MgO-doped stoichiometric LiTaO3 crystal pumped by a 355.66 nm laser. Correlated two-photon states were generated with automatic conservation of energy and momentum in two given spatial modes. These sta… ▽ More We present a highly efficient source for discrete frequency-entangled photon pairs based on spontaneous parametric down-conversion using 3rd order type-0 quasi-phase matching in a periodically poled MgO-doped stoichiometric LiTaO3 crystal pumped by a 355.66 nm laser. Correlated two-photon states were generated with automatic conservation of energy and momentum in two given spatial modes. These states have a wide spectral range, even under small variations in crystal temperature, which consequently results in higher discreteness. Frequency entanglement was confirmed by measuring two-photon quantum interference fringes without any spectral filtering. △ Less

Submitted 14 June, 2015; originally announced June 2015.

Comments: 4 pages, 4 figures, to be published in Optics Letters

Journal ref: Optics Letters 40(13), 3061-3064 (2015)

Experimental Observation of Bohr's Nonlinear Fluidic Surface Oscillation

Authors: Songky Moon, Younghoon Shin, Hojeong Kwak, Juhee Yang, Sang-Bum Lee, Soyun Kim, Kyungwon An

Abstract: Niels Bohr in the early stage of his career developed a nonlinear theory of fluidic surface oscillation in order to study surface tension of liquids. His theory includes the nonlinear interaction between multipolar surface oscillation modes, surpassing the linear theory of Rayleigh and Lamb. It predicts a specific normalized magnitude of $0.41\dot{6}η^2$ for an octapolar component, nonlinearly ind… ▽ More Niels Bohr in the early stage of his career developed a nonlinear theory of fluidic surface oscillation in order to study surface tension of liquids. His theory includes the nonlinear interaction between multipolar surface oscillation modes, surpassing the linear theory of Rayleigh and Lamb. It predicts a specific normalized magnitude of $0.41\dot{6}η^2$ for an octapolar component, nonlinearly induced by a quadrupolar one with a magnitude of $η$ much less than unity. No experimental confirmation on this prediction has been reported. Nonetheless, accurate determination of multipolar components is important as in optical fiber spinning, film blowing and recently in optofluidic microcavities for ray and wave chaos studies and photonics applications. Here, we report experimental verification of his theory. By using optical forward diffraction, we measured the cross-sectional boundary profiles at extreme positions of a surface-oscillating liquid column ejected from a deformed microscopic orifice. We obtained a coefficient of $0.42\pm0.08$ consistently under various experimental conditions. We also measured the resonance mode spectrum of a two-dimensional cavity formed by the cross-sectional segment of the liquid jet. The observed spectra agree well with wave calculations assuming a coefficient of $0.415\pm0.010$. Our measurements establish the first experimental observation of Bohr's hydrodynamic theory. △ Less

Submitted 20 April, 2015; originally announced April 2015.

Comments: 13 pages, 9 figures

Journal ref: Scientific Reports 6, 19805 (2016)

6 MV photon beam modeling for Varian Clinac iX using GEANT4 virtual jaw

Authors: Byung Yong Kim, Hyung Dong Kim, Dong Ho Kim, Jong Geun Baek, Su Ho Moon, Gwang Won Rho, Jeong Ku Kang, Sung Kyu Kim

Abstract: Most virtual source models (VSM) use beam modeling, with the exception of the patient-dependent secondary collimator (jaw). Unlike other components of the treatment head, the jaw absorbs many photons generated by the bremsstrahlung, which decreases the efficiency of the simulation. In the present study, a new method of beam modeling using a virtual jaw was applied to improve the calculation effici… ▽ More Most virtual source models (VSM) use beam modeling, with the exception of the patient-dependent secondary collimator (jaw). Unlike other components of the treatment head, the jaw absorbs many photons generated by the bremsstrahlung, which decreases the efficiency of the simulation. In the present study, a new method of beam modeling using a virtual jaw was applied to improve the calculation efficiency of VSM. The results for the percentage depth dose and profile of the virtual jaw VSM calculated in a homogeneous water phantom agreed with the measurement results for the CC13 cylinder type ion chamber within an error rate of 2%, and the 80 to 20% penumbra width agreed with the measurement results within an error of 0.6 mm. Compared with the existing VSM, in which a great number of photons are absorbed, the calculation efficiency of the VSM using the virtual jaw was expected to increase by approximately 67%. △ Less

Submitted 11 March, 2015; originally announced March 2015.

Comments: 17 pages, 5 figures

Silicon Avalanche Pixel Sensor for High Precision Tracking

Authors: N. D'Ascenzo, P. S. Marrocchesi, C. S. Moon, F. Morsani, L. Ratti, V. Saveliev, A. Savoy Navarro, Q. Xie

Abstract: The development of an innovative position sensitive pixelated sensor to detect and measure with high precision the coordinates of the ionizing particles is proposed. The silicon avalanche pixel sensors (APiX) is based on the vertical integration of avalanche pixels connected in pairs and operated in coincidence in fully digital mode and with the processing electronics embedded on the chip. The APi… ▽ More The development of an innovative position sensitive pixelated sensor to detect and measure with high precision the coordinates of the ionizing particles is proposed. The silicon avalanche pixel sensors (APiX) is based on the vertical integration of avalanche pixels connected in pairs and operated in coincidence in fully digital mode and with the processing electronics embedded on the chip. The APiX sensor addresses the need to minimize the material budget and related multiple scattering effects in tracking systems requiring a high spatial resolution in the presence of a large occupancy. The expected operation of the new sensor features: low noise, low power consumption and suitable radiation tolerance. The APiX device provides on-chip digital information on the position of the coordinate of the impinging charged particle and can be seen as the building block of a modular system of pixelated arrays, implementing a sparsified readout. The technological challenges are the 3D integration of the device under CMOS processes and integration of processing electronics. △ Less

Submitted 30 November, 2013; originally announced December 2013.

Comments: 13th Topical Seminar on Innovative Particle and Radiation Detectors IPRD13

THz radiation by beating Langmuir waves

Authors: S. Son, Sung Joon Moon, J. Y. Park

Abstract: An intense terahertz (THz) radiation generated by the beating of two Langmuir waves, which are excited by the forward Raman scattering, is analyzed theoretically. The radiation energy per shot can be as high as 0.1 J, with the duration of 10 pico-second. Appropriate plasma density and the laser characteristics are examined. An intense terahertz (THz) radiation generated by the beating of two Langmuir waves, which are excited by the forward Raman scattering, is analyzed theoretically. The radiation energy per shot can be as high as 0.1 J, with the duration of 10 pico-second. Appropriate plasma density and the laser characteristics are examined. △ Less

Submitted 17 March, 2013; originally announced March 2013.

THz radiation by the frequency down-shift of Nd:YAG lasers

Authors: S. Son, Sung Joon Moon, J. Y. Park

Abstract: The interaction between an intense laser and a relativistic dense electron beam propagating in the same direction could down-shift the laser frequency. This process, which can be used to generate a coherent THz radiation, is theoretically analyzed. With a set of practically relevant parameters, it is suggested that the radiation energy could reach the order of 1 mJ per shot in the duration of 100… ▽ More The interaction between an intense laser and a relativistic dense electron beam propagating in the same direction could down-shift the laser frequency. This process, which can be used to generate a coherent THz radiation, is theoretically analyzed. With a set of practically relevant parameters, it is suggested that the radiation energy could reach the order of 1 mJ per shot in the duration of 100 pico-second, or the temporal radiation power of 10 MW. △ Less

Submitted 17 March, 2013; originally announced March 2013.

Overcoming the Child-Langmuir law via the magnetic mirror effect

Authors: S. Son, Sung Joon Moon

Abstract: The maximum current in a vacuum tube prescribed by the classical Child-Langmuir law can be overcome, when the space-charge effect of the induced potential is mitigated by the mirror effect in a spatially varying magnetic field. The current could exceed the Child-Langmuir value by as much as a few factors. The regime of practical interest is examined. The maximum current in a vacuum tube prescribed by the classical Child-Langmuir law can be overcome, when the space-charge effect of the induced potential is mitigated by the mirror effect in a spatially varying magnetic field. The current could exceed the Child-Langmuir value by as much as a few factors. The regime of practical interest is examined. △ Less

Submitted 19 August, 2012; originally announced August 2012.

Entropy Maximization and Instability of Uniformly Magnetized Plasma

Authors: S. Son, Sung Joon Moon

Abstract: A regime where a uniformly magnetized plasma could be unstable to a spatial perturbation in the magnetic field is explored. In this regime, a uniformly magnetized state does not maximize the entropy. The physical implication is discussed in the context of the current generation, the magnetic reconnection, and the dynamo effect. A regime where a uniformly magnetized plasma could be unstable to a spatial perturbation in the magnetic field is explored. In this regime, a uniformly magnetized state does not maximize the entropy. The physical implication is discussed in the context of the current generation, the magnetic reconnection, and the dynamo effect. △ Less

Submitted 19 August, 2012; v1 submitted 12 February, 2012; originally announced February 2012.