Showing 1–5 of 5 results for author: Ji, T

High-responsivity, High-detectivity Photomultiplication Organic Photodetector Realized by a Metal-Insulator-Semiconductor Tunneling Junction

Authors: Linlin Shi, Ning Li, Ting Ji, Ye Zhang, Wenyan Wang, Lin Feng, Rong Wen, Yuying Hao, Kaiying Wang, Furong Zhu, Guohui Li, Beng S. Ong, Yanxia Cui

Abstract: Organic photodetectors (OPDs) possess bright prospects in applications of medical imaging and wearable electronics due to the advantages such as low cost, good biocompatibility, and good flexibility. Photomultiplication OPDs (PM-OPDs) enabled by the trap-assisted carrier tunneling injection effect exhibit external quantum efficiencies far greater than unity, thus the acquired responsivities are ex… ▽ More Organic photodetectors (OPDs) possess bright prospects in applications of medical imaging and wearable electronics due to the advantages such as low cost, good biocompatibility, and good flexibility. Photomultiplication OPDs (PM-OPDs) enabled by the trap-assisted carrier tunneling injection effect exhibit external quantum efficiencies far greater than unity, thus the acquired responsivities are extremely high. However, the reported PM-OPDs with high responsivity performances are all accompanied by high dark currents due to the introduction of carrier traps, which inevitably results in inferior detectivities. In this work, we modify a P3HT:PCBM donor-rich PM-OPD by introducing an atomically thin Al2O3 interfacial layer through the ALD technique, obtaining a high responsivity of 8294 A/W and high detectivity of 6.76*10^14 Jones, simultaneously, both of which are among the highest reported for bulk heterojunction PM-OPDs. Ascribed to the introduction of the atomically thin Al2O3 layer, the metal-insulator-semiconductor (MIS) tunneling junction is formed, which brings forward a suppressed dark current along with an increased amounts of holes tunneling under forward bias. Meanwhile, the weak light detection limit of the modified PM-OPD within the linear response range reaches the level of nW/cm2. Based on the proposed PM-OPD, a proof-of-concept image sensor with 26*26 pixels is demonstrated, which can respond to both ultraviolet light and visible light. The PM-OPD based sensor arrays can find broad applications for medical imaging, wearable electronics, etc. △ Less

Submitted 8 October, 2021; originally announced October 2021.

Comments: 25 pages, 12 figures, 1 table

Lateral Drop Rebound on Hydrophobic and Chemically Heterogeneous Surface

Authors: Tingting Ji, Yongcai Pan, Yufu Shao, Bing He, Binghai Wen

Abstract: A drop rebounding from a hydrophobic and chemically heterogeneous surface is investigated using the multiphase lattice Boltzmann method. The behaviors of drop rebounding are dependent on the degrees of the hydrophobicity and heterogeneity of the surface. When the surface is homogeneous, the drop rebounds vertically and the height is getting higher and higher with increases of the surface hydrophob… ▽ More A drop rebounding from a hydrophobic and chemically heterogeneous surface is investigated using the multiphase lattice Boltzmann method. The behaviors of drop rebounding are dependent on the degrees of the hydrophobicity and heterogeneity of the surface. When the surface is homogeneous, the drop rebounds vertically and the height is getting higher and higher with increases of the surface hydrophobicity. When the surface consists of two different hydrophobic surfaces, the drop rebounds laterally towards the low hydrophobic side. The asymmetrical rebounding is because the unbalanced Young's force exerted on the contact line by the high hydrophobic side is greater than that by the low hydrophobic surface. A set of contours of momentum distribution illustrate the dynamic process of drop spreading, shrinking and rebounding. This work promotes the understanding of the rebound mechanism of a drop impacting the surface and also provides a guiding strategy for precisely controlling the lateral behavior of rebounding drops by hydrophobic degrees and heterogeneous surfaces. △ Less

Submitted 3 February, 2021; originally announced February 2021.

Comments: 26 pages, 11 figures, 7200 words

Tungsten based Anisotropic Metamaterial as an Ultra-broadband Absorber

Authors: Yinyue Lin, Yanxia Cui, Fei Ding, Kin Hung Fung, Ting Ji, Dongdong Li, Yuying Hao

Abstract: The trapped rainbow effect has been mostly found on tapered anisotropic metamaterials (MMs) made of low loss noble metals, such as gold, silver, etc. In this work, we demonstrate that an anisotropic MM waveguide made of high loss metal tungsten can also support the trapped rainbow effect similar to the noble metal based structure. We show theoretically that an array of tungsten/germanium anisotrop… ▽ More The trapped rainbow effect has been mostly found on tapered anisotropic metamaterials (MMs) made of low loss noble metals, such as gold, silver, etc. In this work, we demonstrate that an anisotropic MM waveguide made of high loss metal tungsten can also support the trapped rainbow effect similar to the noble metal based structure. We show theoretically that an array of tungsten/germanium anisotropic nano-cones placed on top of a reflective substrate can absorb light at the wavelength range from 0.3 micrometer to 9 micrometer with an average absorption efficiency approaching 98%. It is found that the excitation of multiple orders of slow-light resonant modes is responsible for the efficient absorption at wavelengths longer than 2 micrometer, and the anti-reflection effect of tapered lossy material gives rise to the near perfect absorption at shorter wavelengths. The absorption spectrum suffers a small dip at around 4.2 micrometer where the first order and second order slow-light modes get overlapped, but we can get rid of this dip if the absorption band edge at long wavelength range is reduced down to 5 micrometer. The parametrical study reflects that the absorption bandwidth is mainly determined by the filling ratio of tungsten as well as the bottom diameter of the nano-cones and the interaction between neighboring nano-cones is quite weak. Our proposal has some potential applications in the areas of solar energy harvesting and thermal emitters. △ Less

Submitted 28 October, 2016; originally announced October 2016.

Comments: 20 pages, 10 figures

Efficient multiband absorber based on 1D periodic metal-dielectric photonic crystals with a reflective substrate

Authors: Yanxia Cui, Wenyan Wang, Yingran He, Yuying Hao, Yinyue Lin, Ximin Tian, Ju Xu, Ting Ji, Sailing He, Nicholas X. Fang

Abstract: We propose an efficient multiband absorber comprising a truncated one-dimensional periodic metal-dielectric photonic crystal and a reflective substrate. The reflective substrate is actually an optically thick metallic film. Such a planar device is easier to fabricate compared with the absorbers with complicated shapes. For a 4-unit cell device, all of the four absorption peaks can be optimized wit… ▽ More We propose an efficient multiband absorber comprising a truncated one-dimensional periodic metal-dielectric photonic crystal and a reflective substrate. The reflective substrate is actually an optically thick metallic film. Such a planar device is easier to fabricate compared with the absorbers with complicated shapes. For a 4-unit cell device, all of the four absorption peaks can be optimized with efficiencies higher than 95%. Moreover, those absorption peaks are insensitive to both polarization and incident angle. The influences of the geometrical parameters along with the refractive index of the dielectric on the device performance are discussed as well. Furthermore, it is found that the number of absorption peaks within each photonic band exactly corresponds to the number of the unit cells because the truncated photonic crystal lattices have the function of selecting resonant modes. It is also displayed that the total absorption efficiency gradually increases when there are more metal-dielectric unit cells placing on top of the metallic substrate. Our work is expected to have some potential applications in the areas of solar energy harvesting and thermal emission tailoring. △ Less

Submitted 14 October, 2013; v1 submitted 13 October, 2013; originally announced October 2013.

Comments: This paper has been withdrawn by the author because one of the authors would like his name being only acknowledged

A GEANT4 Simulation Studyof BESIII endcap TOF Upgrade

Authors: Hui Zhang, Ming Shao, Cheng Li, Hongfang Chen, Yuekun Heng, Yongjie Sun, Zebo Tang Changsheng Ji, Tianxiang Chen, Shuai Yang, Lailin Xu

Abstract: A GEANT4-based Monte-Carlo model is developed to study the performance of Endcap Time-Of-Flight (ETOF) at BESIII. It's found that the multiple scattering effects, mainly from the materials at the MDC endcap, can cause multi-hit on the ETOF's readout cell and significantly influence the timing property of ETOF. Multi-gap Resistive Plate Chamber (MRPC) with a smaller readout cell structure is more s… ▽ More A GEANT4-based Monte-Carlo model is developed to study the performance of Endcap Time-Of-Flight (ETOF) at BESIII. It's found that the multiple scattering effects, mainly from the materials at the MDC endcap, can cause multi-hit on the ETOF's readout cell and significantly influence the timing property of ETOF. Multi-gap Resistive Plate Chamber (MRPC) with a smaller readout cell structure is more suitable for ETOF detector due to significantly reduced multi-hit rate, from 71.5% for currently-used scintillator-based ETOF to 21.8% or 16.7% for MRPC-based ETOF, depending on the readout pad size used. The timing performance of a MRPC ETOF is also improved. These simulation results suggest and guide an ETOF upgrade effort at BESIII. △ Less

Submitted 15 August, 2012; originally announced August 2012.

Comments: 11 pages,9 figures