Showing 1–50 of 135 results for author: Cui, Y

First Measurement of the Total Inelastic Cross-Section of Positively-Charged Kaons on Argon at Energies Between 5.0 and 7.5 GeV

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, F. Akbar, K. Allison, S. Alonso Monsalve, M. Alrashed, A. Alton, R. Alvarez, T. Alves, H. Amar, P. Amedo, J. Anderson, C. Andreopoulos, M. Andreotti , et al. (1341 additional authors not shown)

Abstract: ProtoDUNE Single-Phase (ProtoDUNE-SP) is a 770-ton liquid argon time projection chamber that operated in a hadron test beam at the CERN Neutrino Platform in 2018. We present a measurement of the total inelastic cross section of charged kaons on argon as a function of kaon energy using 6 and 7 GeV/$c$ beam momentum settings. The flux-weighted average of the extracted inelastic cross section at each… ▽ More ProtoDUNE Single-Phase (ProtoDUNE-SP) is a 770-ton liquid argon time projection chamber that operated in a hadron test beam at the CERN Neutrino Platform in 2018. We present a measurement of the total inelastic cross section of charged kaons on argon as a function of kaon energy using 6 and 7 GeV/$c$ beam momentum settings. The flux-weighted average of the extracted inelastic cross section at each beam momentum setting was measured to be 380$\pm$26 mbarns for the 6 GeV/$c$ setting and 379$\pm$35 mbarns for the 7 GeV/$c$ setting. △ Less

Submitted 1 August, 2024; originally announced August 2024.

Report number: CERN-EP-2024-211, FERMILAB-PUB-24-0216-V

Simulation study of performance of the Very Large Area gamma-ray Space Telescope

Authors: Xu Pan, Wei Jiang, Chuan Yue, Shi-Jun Lei, Yu-Xin Cui, Qiang Yuan

Abstract: The Very Large Area gamma-ray Space Telescope (VLAST) is a mission concept proposed to detect gamma-ray photons through both the Compton scattering and electron-positron pair production mechanisms, enabling the detection of photons with energies ranging from MeV to TeV. This project aims to conduct a comprehensive survey of the gamma-ray sky from a low Earth orbit using an anti-coincidence detecto… ▽ More The Very Large Area gamma-ray Space Telescope (VLAST) is a mission concept proposed to detect gamma-ray photons through both the Compton scattering and electron-positron pair production mechanisms, enabling the detection of photons with energies ranging from MeV to TeV. This project aims to conduct a comprehensive survey of the gamma-ray sky from a low Earth orbit using an anti-coincidence detector, a tracker detector that also serves as a low energy calorimeter, and a high energy imaging calorimeter. We developed a Monte Carlo simulation application of the detector with the GEANT4 toolkit to evaluate the instrument performance including the effective area, angular resolution and energy resolution, as well as explored specific optimizations of the detector configuration. Our simulation-based analysis indicates that the VLAST's current design is physically feasible, with an acceptance larger than 10~$\rm m^2\ sr$ which is four times larger than Fermi-LAT, an energy resolution better than 2\% at 10~GeV, and an angular resolution better than 0.2 degrees at 10~GeV. The VLAST project is expected to make significant contribution to the field of gamma-ray astronomy and to enhance our understanding of the cosmos. △ Less

Submitted 23 July, 2024; originally announced July 2024.

Comments: 15 pages, 16 figures; Nuclear Science and Techniques in press

Supernova Pointing Capabilities of DUNE

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, B. Aimard, F. Akbar, K. Allison, S. Alonso Monsalve, M. Alrashed, A. Alton, R. Alvarez, T. Alves, H. Amar, P. Amedo, J. Anderson, D. A. Andrade , et al. (1340 additional authors not shown)

Abstract: The determination of the direction of a stellar core collapse via its neutrino emission is crucial for the identification of the progenitor for a multimessenger follow-up. A highly effective method of reconstructing supernova directions within the Deep Underground Neutrino Experiment (DUNE) is introduced. The supernova neutrino pointing resolution is studied by simulating and reconstructing electr… ▽ More The determination of the direction of a stellar core collapse via its neutrino emission is crucial for the identification of the progenitor for a multimessenger follow-up. A highly effective method of reconstructing supernova directions within the Deep Underground Neutrino Experiment (DUNE) is introduced. The supernova neutrino pointing resolution is studied by simulating and reconstructing electron-neutrino charged-current absorption on $^{40}$Ar and elastic scattering of neutrinos on electrons. Procedures to reconstruct individual interactions, including a newly developed technique called ``brems flipping'', as well as the burst direction from an ensemble of interactions are described. Performance of the burst direction reconstruction is evaluated for supernovae happening at a distance of 10 kpc for a specific supernova burst flux model. The pointing resolution is found to be 3.4 degrees at 68% coverage for a perfect interaction-channel classification and a fiducial mass of 40 kton, and 6.6 degrees for a 10 kton fiducial mass respectively. Assuming a 4% rate of charged-current interactions being misidentified as elastic scattering, DUNE's burst pointing resolution is found to be 4.3 degrees (8.7 degrees) at 68% coverage. △ Less

Submitted 14 July, 2024; originally announced July 2024.

Comments: 25 pages, 16 figures

Report number: FERMILAB-PUB-24-0319-LBNF

Achieving Peta-Ohm Resistance for Semi-Insulating 4H-SiC Devices by Atomic Layer Deposition

Authors: Yuying Xi, Helios Y. Li, Guohui Li, Qingmei Su, Kaili Mao, Bingshe Xu, Yuying Hao, Nicholas X. Fang, Yanxia Cui

Abstract: Growing demands for precise current measurements, such as atto-ampere-level measurement of cross-cellular biological current transduction, have spotlighted a pressing need for low-noise resistors with ultra-high resistance immune to voltage fluctuations. Traditional semi-insulating materials, however, struggle to provide consistent resistance across varying voltages. To bridge this gap, we introdu… ▽ More Growing demands for precise current measurements, such as atto-ampere-level measurement of cross-cellular biological current transduction, have spotlighted a pressing need for low-noise resistors with ultra-high resistance immune to voltage fluctuations. Traditional semi-insulating materials, however, struggle to provide consistent resistance across varying voltages. To bridge this gap, we introduce a design that integrates semi-insulating 4H-SiC with atomic-level metal oxide interlayers and electrodes. The strategic adjustment of surface states via atomic-scale metal oxide layers optimizes the work functions on 4H-SiC surfaces, validated through density functional theory simulations. This design transcends conventional limitations, establishing an ideal Ohmic behavior and maintains Peta-Ohm-level resistance, unaffected by voltage variations. These on-chip devices with fine-tuned resistance are compatible with integrated circuit manufacturing processes, making them ideally suited for applications in precision electronics. △ Less

Submitted 14 July, 2024; originally announced July 2024.

Single-Ion Spectroscopy of h-BN Point Defect Fluorescence in Liquid Environments

Authors: Yecun Wu, Kun Xu, Hori Pada Sarker, Takashi Taniguchi, Kenji Watanabe, Frank Abild-Pedersen, Arun Majumdar, Yi Cui, Yan-Kai Tzeng, Steven Chu

Abstract: Understanding individual ions in solutions is essential for advancing our knowledge of complex chemical systems. However, tracking and detecting ions at the single-ion level in liquid environments remains a challenge. We introduce a strategy for visualization and differentiation of different ions in liquid environment via point defects in hexagonal boron nitride (h-BN) as the ion sensor. Ions inte… ▽ More Understanding individual ions in solutions is essential for advancing our knowledge of complex chemical systems. However, tracking and detecting ions at the single-ion level in liquid environments remains a challenge. We introduce a strategy for visualization and differentiation of different ions in liquid environment via point defects in hexagonal boron nitride (h-BN) as the ion sensor. Ions interacting with the optically active point defects in h-BN alter emission properties, allowing us to capture these changes and visualize single ions. Using Li+ in organic electrolytes as a model, we observed a spectral shift of over 10 nm upon Li+ addition, and an over 50 nm red shift with applied electric fields due to reactions between Li+ and h-BN point defects. Frequency domain analysis further revealed the rapid dynamics of ion migration and the slow electrochemical reactions. We further spectroscopically differentiated various ions (H+, Li+, Na+, K+, Zn2+, Al3+) in aqueous solution. Each ion, with its distinct electron cloud configuration, interacts distinctively with the electron clouds of h-BN defects, resulting in specific and identifiable spectroscopic signatures. This ion sensing platform enables the direct visualization and differentiation of individual ions in a liquid environment, offering insights into chemical reactions at the single-ion level. This capability presents potential applications in various fields involving ions in liquids, including but not limited to biology, battery technology, and environmental science. △ Less

Submitted 2 July, 2024; originally announced July 2024.

Measurement of dynamic nonlocal deformation using nanodiamond sensors

Authors: Yue Cui, Weng-Hang Leong, Guoli Zhu, Ren-Bao Liu, Quan Li

Abstract: Nonlocal deformation sensing achieved by integrating atomic force microscopy indentation with nanodiamond-based orientation tracking features high precision and high spatial resolution, providing a useful technique for studying the mechanical properties of soft biological systems. However, this technique is currently limited to lifeless systems because it cannot differentiate the indentation-induc… ▽ More Nonlocal deformation sensing achieved by integrating atomic force microscopy indentation with nanodiamond-based orientation tracking features high precision and high spatial resolution, providing a useful technique for studying the mechanical properties of soft biological systems. However, this technique is currently limited to lifeless systems because it cannot differentiate the indentation-induced deformation from that associated with live activities or other external perturbations. Here we develop a dynamic nonlocal deformation sensing method using oscillatory nanoindentation and spectroscopic analysis to overcome this limitation. The method realizes both temporally and spatially resolved mechanical analysis, with tens of microsecond time-lag precision, nanometer vertical deformation precision, and sub-hundred nanometer lateral spatial resolution, leading to the disclosure of surface/interface effects in the mechanical response of viscoelastic materials and live cells. Neglecting surface tension would underestimate the liquid-like characteristics of the materials. This work demonstrates nanodiamond sensors as a useful tool for spatial-temporal mechanical analysis of soft, complex bio-relevant materials. △ Less

Submitted 5 June, 2024; originally announced June 2024.

Comments: 33 pages (4 figures) + 26 pages (20 figures)

Simulation of DAMPE silicon microstrip detectors in the $\rm Allpix^{2}$ framework

Authors: Yu-Xin Cui, Xiang Li, Shen Wang, Chuan Yue, Qiang Wan, Shi-Jun Lei, Guan-Wen Yuan, Yi-Ming Hu, Jia-Ju Wei, Jian-Hua Guo

Abstract: Silicon strip detectors have been widely utilized in space experiments for gamma-ray and cosmic-ray detections thanks to their high spatial resolution and stable performance. For a silicon micro-strip detector, the Monte Carlo simulation is recognized as a practical and cost-effective approach to verify the detector performance. In this study, a technique for the simulation of the silicon micro-st… ▽ More Silicon strip detectors have been widely utilized in space experiments for gamma-ray and cosmic-ray detections thanks to their high spatial resolution and stable performance. For a silicon micro-strip detector, the Monte Carlo simulation is recognized as a practical and cost-effective approach to verify the detector performance. In this study, a technique for the simulation of the silicon micro-strip detector with the $\rm Allpix^{2}$ framework is developed. By incorporating the electric field into the particle transport simulation based on Geant4, this framework could precisely emulate the carrier drift in the silicon micro-strip detector. The simulation results are validated using the beam test data as well as the flight data of the DAMPE experiment, which suggests that the $\rm Allpix^{2}$ framework is a powerful tool to obtain the performance of the silicon micro-strip detector. △ Less

Submitted 3 June, 2024; originally announced June 2024.

Journal ref: Nuclear Instruments and Methods in Physics Research A 1057 (2023) 168685

Data quality control system and long-term performance monitor of the LHAASO-KM2A

Authors: Zhen Cao, F. Aharonian, Axikegu, Y. X. Bai, Y. W. Bao, D. Bastieri, X. J. Bi, Y. J. Bi, W. Bian, A. V. Bukevich, Q. Cao, W. Y. Cao, Zhe Cao, J. Chang, J. F. Chang, A. M. Chen, E. S. Chen, H. X. Chen, Liang Chen, Lin Chen, Long Chen, M. J. Chen, M. L. Chen, Q. H. Chen, S. Chen , et al. (263 additional authors not shown)

Abstract: The KM2A is the largest sub-array of the Large High Altitude Air Shower Observatory (LHAASO). It consists of 5216 electromagnetic particle detectors (EDs) and 1188 muon detectors (MDs). The data recorded by the EDs and MDs are used to reconstruct primary information of cosmic ray and gamma-ray showers. This information is used for physical analysis in gamma-ray astronomy and cosmic ray physics. To… ▽ More The KM2A is the largest sub-array of the Large High Altitude Air Shower Observatory (LHAASO). It consists of 5216 electromagnetic particle detectors (EDs) and 1188 muon detectors (MDs). The data recorded by the EDs and MDs are used to reconstruct primary information of cosmic ray and gamma-ray showers. This information is used for physical analysis in gamma-ray astronomy and cosmic ray physics. To ensure the reliability of the LHAASO-KM2A data, a three-level quality control system has been established. It is used to monitor the status of detector units, stability of reconstructed parameters and the performance of the array based on observations of the Crab Nebula and Moon shadow. This paper will introduce the control system and its application on the LHAASO-KM2A data collected from August 2021 to July 2023. During this period, the pointing and angular resolution of the array were stable. From the observations of the Moon shadow and Crab Nebula, the results achieved using the two methods are consistent with each other. According to the observation of the Crab Nebula at energies from 25 TeV to 100 TeV, the time averaged pointing errors are estimated to be $-0.003^{\circ} \pm 0.005^{\circ}$ and $0.001^{\circ} \pm 0.006^{\circ}$ in the R.A. and Dec directions, respectively. △ Less

Submitted 13 June, 2024; v1 submitted 20 May, 2024; originally announced May 2024.

Comments: 15 pages, 9 figures

Ab initio intermolecular interactions mediate thermochemically real-fluid effects that affect system reactivity

Authors: Mingrui Wang, Ruoyue Tang, Xinrui Ren, Yanqing Cui, Song Cheng

Abstract: The properties of supercritical fluids are dictated by intermolecular interactions that involve two or more molecules. Such intermolecular interactions were described via intermolecular potentials in historical supercritical combustion modeling studies, but have been treated empirically and with no consideration of radical interactions or multi-body interactions involving more than two molecules.… ▽ More The properties of supercritical fluids are dictated by intermolecular interactions that involve two or more molecules. Such intermolecular interactions were described via intermolecular potentials in historical supercritical combustion modeling studies, but have been treated empirically and with no consideration of radical interactions or multi-body interactions involving more than two molecules. This approach has been adopted long ago, assuming sufficient characterization of real-fluid effects during supercritical combustion. Here, with data from ab initio multi-body intermolecular potentials, non-empirical Virial Equation of State (EoS), and real-fluid thermochemical and kinetic simulations, we reveal that empirical intermolecular potentials can lead to significant errors in representing supercritical fluids under common combustion situations, which can be impressively described by ab initio intermolecular potentials. These interactions are also found to greatly influence autoignition delay times, a common measure of global reactivity, with significant contributions from radical interactions and multi-body interactions. It is therefore of necessity to incorporate ab initio intermolecular interactions in studying supercritical combustion and various dynamic systems involving supercritical fluids, which has now been enabled through the new framework developed in the present study. △ Less

Submitted 19 May, 2024; originally announced May 2024.

Performance of a modular ton-scale pixel-readout liquid argon time projection chamber

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, B. Aimard, F. Akbar, K. Allison, S. Alonso Monsalve, M. Alrashed, A. Alton, R. Alvarez, T. Alves, H. Amar, P. Amedo, J. Anderson, D. A. Andrade , et al. (1340 additional authors not shown)

Abstract: The Module-0 Demonstrator is a single-phase 600 kg liquid argon time projection chamber operated as a prototype for the DUNE liquid argon near detector. Based on the ArgonCube design concept, Module-0 features a novel 80k-channel pixelated charge readout and advanced high-coverage photon detection system. In this paper, we present an analysis of an eight-day data set consisting of 25 million cosmi… ▽ More The Module-0 Demonstrator is a single-phase 600 kg liquid argon time projection chamber operated as a prototype for the DUNE liquid argon near detector. Based on the ArgonCube design concept, Module-0 features a novel 80k-channel pixelated charge readout and advanced high-coverage photon detection system. In this paper, we present an analysis of an eight-day data set consisting of 25 million cosmic ray events collected in the spring of 2021. We use this sample to demonstrate the imaging performance of the charge and light readout systems as well as the signal correlations between the two. We also report argon purity and detector uniformity measurements, and provide comparisons to detector simulations. △ Less

Submitted 5 March, 2024; originally announced March 2024.

Comments: 47 pages, 41 figures

Report number: FERMILAB-PUB-24-0073-LBNF

Doping Liquid Argon with Xenon in ProtoDUNE Single-Phase: Effects on Scintillation Light

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, B. Aimard, F. Akbar, K. Allison, S. Alonso Monsalve, M. Alrashed, A. Alton, R. Alvarez, H. Amar Es-sghir, P. Amedo, J. Anderson, D. A. Andrade, C. Andreopoulos , et al. (1300 additional authors not shown)

Abstract: Doping of liquid argon TPCs (LArTPCs) with a small concentration of xenon is a technique for light-shifting and facilitates the detection of the liquid argon scintillation light. In this paper, we present the results of the first doping test ever performed in a kiloton-scale LArTPC. From February to May 2020, we carried out this special run in the single-phase DUNE Far Detector prototype (ProtoDUN… ▽ More Doping of liquid argon TPCs (LArTPCs) with a small concentration of xenon is a technique for light-shifting and facilitates the detection of the liquid argon scintillation light. In this paper, we present the results of the first doping test ever performed in a kiloton-scale LArTPC. From February to May 2020, we carried out this special run in the single-phase DUNE Far Detector prototype (ProtoDUNE-SP) at CERN, featuring 770 t of total liquid argon mass with 410 t of fiducial mass. The goal of the run was to measure the light and charge response of the detector to the addition of xenon, up to a concentration of 18.8 ppm. The main purpose was to test the possibility for reduction of non-uniformities in light collection, caused by deployment of photon detectors only within the anode planes. Light collection was analysed as a function of the xenon concentration, by using the pre-existing photon detection system (PDS) of ProtoDUNE-SP and an additional smaller set-up installed specifically for this run. In this paper we first summarize our current understanding of the argon-xenon energy transfer process and the impact of the presence of nitrogen in argon with and without xenon dopant. We then describe the key elements of ProtoDUNE-SP and the injection method deployed. Two dedicated photon detectors were able to collect the light produced by xenon and the total light. The ratio of these components was measured to be about 0.65 as 18.8 ppm of xenon were injected. We performed studies of the collection efficiency as a function of the distance between tracks and light detectors, demonstrating enhanced uniformity of response for the anode-mounted PDS. We also show that xenon doping can substantially recover light losses due to contamination of the liquid argon by nitrogen. △ Less

Submitted 9 February, 2024; v1 submitted 2 February, 2024; originally announced February 2024.

Comments: 35 pages, 20 figures

Report number: CERN-EP-2024-024; FERMILAB-PUB-23-0819-LBNF

The DUNE Far Detector Vertical Drift Technology, Technical Design Report

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, B. Aimard, F. Akbar, K. Allison, S. Alonso Monsalve, M. Alrashed, A. Alton, R. Alvarez, H. Amar, P. Amedo, J. Anderson, D. A. Andrade, C. Andreopoulos , et al. (1304 additional authors not shown)

Abstract: DUNE is an international experiment dedicated to addressing some of the questions at the forefront of particle physics and astrophysics, including the mystifying preponderance of matter over antimatter in the early universe. The dual-site experiment will employ an intense neutrino beam focused on a near and a far detector as it aims to determine the neutrino mass hierarchy and to make high-precisi… ▽ More DUNE is an international experiment dedicated to addressing some of the questions at the forefront of particle physics and astrophysics, including the mystifying preponderance of matter over antimatter in the early universe. The dual-site experiment will employ an intense neutrino beam focused on a near and a far detector as it aims to determine the neutrino mass hierarchy and to make high-precision measurements of the PMNS matrix parameters, including the CP-violating phase. It will also stand ready to observe supernova neutrino bursts, and seeks to observe nucleon decay as a signature of a grand unified theory underlying the standard model. The DUNE far detector implements liquid argon time-projection chamber (LArTPC) technology, and combines the many tens-of-kiloton fiducial mass necessary for rare event searches with the sub-centimeter spatial resolution required to image those events with high precision. The addition of a photon detection system enhances physics capabilities for all DUNE physics drivers and opens prospects for further physics explorations. Given its size, the far detector will be implemented as a set of modules, with LArTPC designs that differ from one another as newer technologies arise. In the vertical drift LArTPC design, a horizontal cathode bisects the detector, creating two stacked drift volumes in which ionization charges drift towards anodes at either the top or bottom. The anodes are composed of perforated PCB layers with conductive strips, enabling reconstruction in 3D. Light-trap-style photon detection modules are placed both on the cryostat's side walls and on the central cathode where they are optically powered. This Technical Design Report describes in detail the technical implementations of each subsystem of this LArTPC that, together with the other far detector modules and the near detector, will enable DUNE to achieve its physics goals. △ Less

Submitted 5 December, 2023; originally announced December 2023.

Comments: 425 pages; 281 figures Central editing team: A. Heavey, S. Kettell, A. Marchionni, S. Palestini, S. Rajogopalan, R. J. Wilson

Report number: Fermilab Report no: TM-2813-LBNF

Sedimentation of a single soluble particle at low Reynolds and high Péclet numbers

Authors: Nan He, Yutong Cui, David Wai Quan Chin, Thierry Darnige, Philippe Claudin, Benoît Semin

Abstract: We investigate experimentally the dissolution of an almost spherical butyramide particle during its sedimentation, in the low Reynolds high Péclet regime. The particle sediments in a quiescent aqueous solution, and its shape and position are measured simultaneously by a camera attached to a translation stage. The particle is tracked in real time, and the translation stage moves accordingly to keep… ▽ More We investigate experimentally the dissolution of an almost spherical butyramide particle during its sedimentation, in the low Reynolds high Péclet regime. The particle sediments in a quiescent aqueous solution, and its shape and position are measured simultaneously by a camera attached to a translation stage. The particle is tracked in real time, and the translation stage moves accordingly to keep the particle in the field of the camera. The measurements from the particle image show that the radius shrinking rate is constant with time, and independent of the initial radius of the particle. We explain this with a simple model, based on the sedimentation law in the Stokes' regime and the mass transfer rate at low Reynolds and high Péclet numbers. The theoretical and experimental results are consistent within $20\%$. We introduce two correction factors to take into account the non-sphericity of the particle and the inclusions of air bubbles inside the particle, and reach quantitative agreement. With these corrections, the indirect measurement of the radius shrinking rate deduced from the position measurement is also in agreement with the model. We discuss other correction factors, and explain why there are negligible in the present experiment. We also compute the effective Sherwood number as a function of an effective Péclet number. △ Less

Submitted 23 October, 2023; originally announced October 2023.

Microstructure evolution and characteristics of laser-clad lightweight refractory NbxMo$_{0.5}$Ti$_{1.5}$Ta$_{0.2}$Cr high-entropy alloy

Authors: C. Y. Cui, H. H. Xu, J. Yang, X. G. Cui

Abstract: Lightweight refractory high-entropy alloy coatings (RHEAcs) of NbxMo$_{0.5}$Ti$_{1.5}$Ta$_{0.2}$Cr (where $x=$ 1, 1.3, 1.5, and 2) were fabricated on the surface of 316L stainless steel using laser cladding (LC) technology. A comprehensive study was conducted to elucidate the effect of Nb content on the microstructure, microhardness and wear resistance of NbxMo$_{0.5}$Ti$_{1.5}$Ta$_{0.2}$Cr RHEAcs… ▽ More Lightweight refractory high-entropy alloy coatings (RHEAcs) of NbxMo$_{0.5}$Ti$_{1.5}$Ta$_{0.2}$Cr (where $x=$ 1, 1.3, 1.5, and 2) were fabricated on the surface of 316L stainless steel using laser cladding (LC) technology. A comprehensive study was conducted to elucidate the effect of Nb content on the microstructure, microhardness and wear resistance of NbxMo$_{0.5}$Ti$_{1.5}$Ta$_{0.2}$Cr RHEAcs before and after annealing at 900 for 10 h. The results show that the grains are gradually refined with the increase of Nb content. The coating consists mainly of a body-centered cubic (BCC) solid solution, C15-Laves phase, and a small amount of hexagonal close-packed (HCP) solid solution containing Ti. The microhardness of RHEAcs is significantly higher compared to the base material. Notably, at Nb1.3, due to the influence of lattice dislocations, the microhardness reaches a peak of 1066.5 HV, which is about 7.11 times higher than that of the base material. On the contrary, at Nb$_2$, the microhardness is at its lowest point, averaging 709.31 HV, but 4.72 times that of the base material. After annealing, an increase in microhardness is observed at all Nb concentrations, up to 31.2% at Nb$_2$. Before annealing, the wear resistance of RHEAcs was slightly better than that of 316L stainless steel at different Nb contents. However, after annealing, the coefficient of friction (COF) and wear rate of the coatings are lower than those of annealed 316L stainless steel, highlighting their excellent wear resistance. It is noteworthy that the loss of wear properties after annealing at Nb1 is at a minimum, obtaining the most balanced wear resistance before and after annealing. The enhanced wear resistance after annealing can be attributed to the presence of ultra-fine grain oxide friction layers, mainly composed of TiO2 and Ta2O5 . The main mode of wear is oxidative wear, with a small amount of wear from abrasive wear. △ Less

Submitted 22 October, 2023; originally announced October 2023.

Terrestrial Very-Long-Baseline Atom Interferometry: Workshop Summary

Authors: Sven Abend, Baptiste Allard, Iván Alonso, John Antoniadis, Henrique Araujo, Gianluigi Arduini, Aidan Arnold, Tobias Aßmann, Nadja Augst, Leonardo Badurina, Antun Balaz, Hannah Banks, Michele Barone, Michele Barsanti, Angelo Bassi, Baptiste Battelier, Charles Baynham, Beaufils Quentin, Aleksandar Belic, Ankit Beniwal, Jose Bernabeu, Francesco Bertinelli, Andrea Bertoldi, Ikbal Ahamed Biswas, Diego Blas , et al. (228 additional authors not shown)

Abstract: This document presents a summary of the 2023 Terrestrial Very-Long-Baseline Atom Interferometry Workshop hosted by CERN. The workshop brought together experts from around the world to discuss the exciting developments in large-scale atom interferometer (AI) prototypes and their potential for detecting ultralight dark matter and gravitational waves. The primary objective of the workshop was to lay… ▽ More This document presents a summary of the 2023 Terrestrial Very-Long-Baseline Atom Interferometry Workshop hosted by CERN. The workshop brought together experts from around the world to discuss the exciting developments in large-scale atom interferometer (AI) prototypes and their potential for detecting ultralight dark matter and gravitational waves. The primary objective of the workshop was to lay the groundwork for an international TVLBAI proto-collaboration. This collaboration aims to unite researchers from different institutions to strategize and secure funding for terrestrial large-scale AI projects. The ultimate goal is to create a roadmap detailing the design and technology choices for one or more km-scale detectors, which will be operational in the mid-2030s. The key sections of this report present the physics case and technical challenges, together with a comprehensive overview of the discussions at the workshop together with the main conclusions. △ Less

Submitted 12 October, 2023; originally announced October 2023.

Comments: Summary of the Terrestrial Very-Long-Baseline Atom Interferometry Workshop held at CERN: https://indico.cern.ch/event/1208783/

Optical Photon Simulation with Mitsuba3

Authors: Adam C. S. Davis, Sacha Barré, Yangyang Cui, Keith L Evans, Marco Gersabeck, Antonin Rat, Zahra Montazeri

Abstract: Optical photon propagation is an embarrassingly parallel operation, well suited to acceleration on GPU devices. Rendering of images employs similar techniques -- for this reason, a pipeline to offload optical photon propagation from Geant4 to the industry-standard open-source renderer Mitsuba3 has been devised. With the creation of a dedicated plugin for single point multi-source emission, we find… ▽ More Optical photon propagation is an embarrassingly parallel operation, well suited to acceleration on GPU devices. Rendering of images employs similar techniques -- for this reason, a pipeline to offload optical photon propagation from Geant4 to the industry-standard open-source renderer Mitsuba3 has been devised. With the creation of a dedicated plugin for single point multi-source emission, we find a photon propagation rate of $2\times10^{5}$ photons per second per CPU thread using LLVM and $1.2\times10^{6}$ photons per second per GPU using CUDA. This represents a speed-up of 70 on CPU and 400 on GPU over Geant4 and is competitive with other similar applications. The potential for further applications is discussed. △ Less

Submitted 21 September, 2023; originally announced September 2023.

Comments: 7 pages, 8 figures

Predicting Relative Populations of Protein Conformations without a Physics Engine Using AlphaFold2

Authors: Gabriel Monteiro da Silva, Jennifer Y. Cui, David C. Dalgarno, George P. Lisi, Brenda M. Rubenstein

Abstract: This paper presents a novel approach for predicting the relative populations of protein conformations using AlphaFold 2, an AI-powered method that has revolutionized biology by enabling the accurate prediction of protein structures. While AlphaFold 2 has shown exceptional accuracy and speed, it is designed to predict proteins' single ground state conformations and is limited in its ability to pred… ▽ More This paper presents a novel approach for predicting the relative populations of protein conformations using AlphaFold 2, an AI-powered method that has revolutionized biology by enabling the accurate prediction of protein structures. While AlphaFold 2 has shown exceptional accuracy and speed, it is designed to predict proteins' single ground state conformations and is limited in its ability to predict fold switching and the effects of mutations on conformational landscapes. Here, we demonstrate how AlphaFold 2 can directly predict the relative populations of different conformations of proteins and even accurately predict changes in those populations induced by mutations by subsampling multiple sequence alignments. We tested our method against NMR experiments on two proteins with drastically different amounts of available sequence data, Abl1 kinase and the granulocyte-macrophage colony-stimulating factor, and predicted changes in their relative state populations with accuracies in excess of 80%. Our method offers a fast and cost-effective way to predict protein conformations and their relative populations at even single point mutation resolution, making it a useful tool for pharmacology, analyzing NMR data, and studying the effects of evolution. △ Less

Submitted 26 July, 2023; originally announced July 2023.

Comments: 26 pages, 9 figures

ACM Class: J.2; J.3

Magnetic-field-induced splitting of Rydberg Electromagnetically Induced Transparency (EIT) and Autler-Townes (AT) spectra in $^{87}$Rb vapor cell

Authors: Xinheng Li, Yue Cui, Jianhai Hao, Fei Zhou, Fengdong Jia, Jian Zhang, Feng Xie, Zhiping Zhong

Abstract: We theoretically and experimentally investigate the Rydberg electromagnetically induced transparency (EIT) and Autler-Townes (AT) splitting of $^{87}$Rb vapor under the combined influence of a magnetic field and a microwave field. In the presence of static magnetic field, the effect of the microwave field leads to the dressing and splitting of each $m_F$ state, resulting in multiple spectral peaks… ▽ More We theoretically and experimentally investigate the Rydberg electromagnetically induced transparency (EIT) and Autler-Townes (AT) splitting of $^{87}$Rb vapor under the combined influence of a magnetic field and a microwave field. In the presence of static magnetic field, the effect of the microwave field leads to the dressing and splitting of each $m_F$ state, resulting in multiple spectral peaks in the EIT-AT spectrum. A simplified analytical formula was developed to explain the EIT-AT spectrum in a static magnetic field, and the calculations are in excellent agreement with experimental results.We further studied the enhancement of the Rydberg atom microwave electric field sensor performance by making use of the splitting interval between the two maximum absolute $m_F$ states under static magnetic field. The traceable measurement limit of weak electric field by EIT-AT splitting method was extended by an order of magnitude, which is promising for precise microwave electric field measurement. △ Less

Submitted 22 June, 2023; originally announced June 2023.

Comments: 12 pages, 4 figures

Monofluorinated Ether Electrolyte with Acetal Backbone for High-Performance Lithium Metal Batteries

Authors: Elizabeth Zhang, Yuelang Chen, Zhiao Yu, Yi Cui, Zhenan Bao

Abstract: High degree of fluorination for ether electrolytes has resulted in improved cycling stability of lithium metal batteries (LMBs) due to stable SEI formation and good oxidative stability. However, the sluggish ion transport and environmental concerns of high fluorination degree drives the need to develop less fluorinated structures. Here, we introduce bis(2-fluoroethoxy)methane (F2DEM) which feature… ▽ More High degree of fluorination for ether electrolytes has resulted in improved cycling stability of lithium metal batteries (LMBs) due to stable SEI formation and good oxidative stability. However, the sluggish ion transport and environmental concerns of high fluorination degree drives the need to develop less fluorinated structures. Here, we introduce bis(2-fluoroethoxy)methane (F2DEM) which features monofluorination of the acetal backbone. High coulombic efficiency (CE) and stable long-term cycling in Li||Cu half cells can be achieved with F2DEM even under fast Li metal plating conditions. The performance of F2DEM is further compared with diethoxymethane (DEM) and 2-[2-(2,2-Difluoroethoxy)ethoxy]-1,1,1-Trifluoroethane (F5DEE). The structural similarity of DEM allows us to better probe the effects of monofluorination, while F5DEE is chosen as the one of the best performing LMB electrolytes for reference. The monofluorine substitution provides improved oxidation stability compared to non-fluorinated DEM, as demonstrated in the linear sweep voltammetry (LSV) and voltage holding experiments in Li||Pt and Li||Al cells. Higher ionic conductivity compared to F5DEE is also observed due to the decreased degree of fluorination. Furthermore, 1.75 M lithium bis(fluorosulfonyl)imide (LiFSI) / F2DEM displays significantly lower overpotential compared with the two reference electrolytes, which improves energy efficiency and enables its application in high-rate conditions. Comparative studies of F2DEM with DEM and F5DEE in anode-free (LiFePO4) LFP pouch cells and high-loading LFP coin cells with 20 μm excess Li further show improved capacity retention of F2DEM electrolyte. △ Less

Submitted 31 May, 2023; originally announced May 2023.

Comments: 19 pages, 6 figures

The Lobster Eye Imager for Astronomy Onboard the SATech-01 Satellite

Authors: Z. X. Ling, X. J. Sun, C. Zhang, S. L. Sun, G. Jin, S. N. Zhang, X. F. Zhang, J. B. Chang, F. S. Chen, Y. F. Chen, Z. W. Cheng, W. Fu, Y. X. Han, H. Li, J. F. Li, Y. Li, Z. D. Li, P. R. Liu, Y. H. Lv, X. H. Ma, Y. J. Tang, C. B. Wang, R. J. Xie, Y. L. Xue, A. L. Yan , et al. (101 additional authors not shown)

Abstract: The Lobster Eye Imager for Astronomy (LEIA), a pathfinder of the Wide-field X-ray Telescope of the Einstein Probe (EP) mission, was successfully launched onboard the SATech-01 satellite of the Chinese Academy of Sciences on 27 July 2022. In this paper, we introduce the design and on-ground test results of the LEIA instrument. Using state-of-the-art Micro-Pore Optics (MPO), a wide field-of-view (Fo… ▽ More The Lobster Eye Imager for Astronomy (LEIA), a pathfinder of the Wide-field X-ray Telescope of the Einstein Probe (EP) mission, was successfully launched onboard the SATech-01 satellite of the Chinese Academy of Sciences on 27 July 2022. In this paper, we introduce the design and on-ground test results of the LEIA instrument. Using state-of-the-art Micro-Pore Optics (MPO), a wide field-of-view (FoV) of 346 square degrees (18.6 degrees * 18.6 degrees) of the X-ray imager is realized. An optical assembly composed of 36 MPO chips is used to focus incident X-ray photons, and four large-format complementary metal-oxide semiconductor (CMOS) sensors, each of 6 cm * 6 cm, are used as the focal plane detectors. The instrument has an angular resolution of 4 - 8 arcmin (in FWHM) for the central focal spot of the point spread function, and an effective area of 2 - 3 cm2 at 1 keV in essentially all the directions within the field of view. The detection passband is 0.5 - 4 keV in the soft X-rays and the sensitivity is 2 - 3 * 10-11 erg s-1 cm-2 (about 1 mini-Crab) at 1,000 second observation. The total weight of LEIA is 56 kg and the power is 85 W. The satellite, with a design lifetime of 2 years, operates in a Sun-synchronous orbit of 500 km with an orbital period of 95 minutes. LEIA is paving the way for future missions by verifying in flight the technologies of both novel focusing imaging optics and CMOS sensors for X-ray observation, and by optimizing the working setups of the instrumental parameters. In addition, LEIA is able to carry out scientific observations to find new transients and to monitor known sources in the soft X-ray band, albeit limited useful observing time available. △ Less

Submitted 24 May, 2023; originally announced May 2023.

Comments: Accepted by RAA

Microwave electrometry with Rydberg atoms in a vapor cell using microwave amplitude modulation

Authors: Jianhai Hao, Fengdong Jia, Yue Cui, Yuhan Wang, Fei Zhou, Xiubin Liu, Jian Zhang, Feng Xie, Zhiping Zhong

Abstract: We have theoretically and experimentally studied the dispersive signal of the Rydberg atomic electromagnetically induced transparency (EIT) - Autler-Townes (AT) splitting spectra obtained using amplitude modulation of the microwave (MW) field. In addition to the two zero-crossing points, the dispersion signal has two positive maxima with an interval defined as the shoulder interval of the dispersi… ▽ More We have theoretically and experimentally studied the dispersive signal of the Rydberg atomic electromagnetically induced transparency (EIT) - Autler-Townes (AT) splitting spectra obtained using amplitude modulation of the microwave (MW) field. In addition to the two zero-crossing points, the dispersion signal has two positive maxima with an interval defined as the shoulder interval of the dispersion signal $Δf_{\text{sho}}$. The relationship of MW field strength $E_{\text{MW}}$ and $Δf_{\text{sho}}$ are studied at the MW frequencies of 31.6 GHz, 22.1 GHz, and 9.2 GHz respectively. The results show that $Δf_{\text{sho}}$ can be used to character the much weaker $E_{\text{MW}}$ than the interval of two zero-crossing points $Δf_{\text{zeros}}$ and the traditional EIT-AT splitting interval $Δf_{\text{m}}$, the minimum $E_{\text{MW}}$ measured by $Δf_{\text{sho}}$ is about 30 times smaller than that by $Δf_{\text{m}}$. As an example, the minimum $E_{\text{MW}}$ at 9.2 GHz that can be characterized by $Δf_{\text{sho}}$ is 0.056 mV/cm, which is the minimum value characterized by frequency interval using vapour cell without adding any auxiliary fields. The proposed method can improve the weak limit and sensitivity of $E_{\text{MW}}$ measured by spectral frequency interval, which is important in the direct measurement of weak $E_{\text{MW}}$. △ Less

Submitted 18 April, 2023; originally announced April 2023.

Nonrelativistic and nonmagnetic control of terahertz charge currents via electrical anisotropy in RuO2 and IrO2

Authors: Sheng Zhang, Yongwei Cui, Shunjia Wang, Haoran Chen, Yaxin Liu, Wentao Qin, Tongyang Guan, Chuanshan Tian, Zhe Yuan, Lei Zhou, Yizheng Wu, Zhensheng Tao

Abstract: Precise and ultrafast control over photo-induced charge currents across nanoscale interfaces could lead to important applications in energy harvesting, ultrafast electronics, and coherent terahertz sources. Recent studies have shown that several relativistic mechanisms, including inverse spin-Hall effect, inverse Rashba-Edelstein effect and inverse spin-orbit-torque effect, can convert longitudina… ▽ More Precise and ultrafast control over photo-induced charge currents across nanoscale interfaces could lead to important applications in energy harvesting, ultrafast electronics, and coherent terahertz sources. Recent studies have shown that several relativistic mechanisms, including inverse spin-Hall effect, inverse Rashba-Edelstein effect and inverse spin-orbit-torque effect, can convert longitudinally injected spin-polarized currents from magnetic materials to transverse charge currents, thereby harnessing these currents for terahertz generation. However, these mechanisms typically require external magnetic fields and suffer from low spin-polarization rates and low efficiencies of relativistic spin-to-charge conversion. In this work, we present a novel nonrelativistic and nonmagnetic mechanism that directly utilizes the photo-excited high-density charge currents across the interface. We demonstrate that the electrical anisotropy of conductive oxides RuO2 and IrO2 can effectively deflect injected charge currents to the transverse direction, resulting in efficient and broadband terahertz radiation. Importantly, this new mechanism has the potential to offer much higher conversion efficiency compared to previous methods, as conductive materials with large electrical anisotropy are readily available, whereas further increasing the spin-Hall angle of heavy-metal materials would be challenging. Our new findings offer exciting possibilities for directly utilizing these photo-excited high-density currents across metallic interfaces for ultrafast electronics and terahertz spectroscopy. △ Less

Submitted 2 April, 2023; originally announced April 2023.

Journal ref: Advanced Photonics (2023)

A variational quantum algorithm-based numerical method for solving potential and Stokes flows

Authors: Yangyang Liu, Zhen Chen, Chang Shu, Patrick Rebentrost, Yaguang Liu, S. C. Chew, B. C. Khoo, Y. D. Cui

Abstract: This paper presents a numerical method based on the variational quantum algorithm to solve potential and Stokes flow problems. In this method, the governing equations for potential and Stokes flows can be respectively written in the form of Laplace's equation and Stokes equations using velocity potential, stream function and vorticity formulations. Then the finite difference method and the general… ▽ More This paper presents a numerical method based on the variational quantum algorithm to solve potential and Stokes flow problems. In this method, the governing equations for potential and Stokes flows can be respectively written in the form of Laplace's equation and Stokes equations using velocity potential, stream function and vorticity formulations. Then the finite difference method and the generalised differential quadrature (GDQ) method are applied to discretize the governing equations. For the prescribed boundary conditions, the corresponding linear systems of equations can be obtained. These linear systems are solved by using the variational quantum linear solver (VQLS), which resolves the potential and Stokes flow problems equivalently. To the best of authors' knowledge, this is the first study that incorporates the GDQ method which is inherently a high-order discretization method with the VQLS algorithm. Since the GDQ method can utilize much fewer grid points than the finite difference method to approximate derivatives with a higher order of accuracy, the size of the input matrix for the VQLS algorithm can be smaller. In this way, the computational cost may be saved. The performance of the present method is comprehensively assessed by two representative examples, namely, the potential flow around a circular cylinder and Stokes flow in a lid-driven cavity. Numerical results validate the applicability and accuracy of the present VQLS-based method. Furthermore, its time complexity is evaluated by the heuristic scaling, which demonstrates that the present method scales efficiently in the number of qubits and the precision. This work brings quantum computing to the field of computational fluid dynamics. By virtue of quantum advantage over classical methods, promising advances in solving large-scale fluid mechanics problems of engineering interest may be prompted. △ Less

Submitted 3 March, 2023; originally announced March 2023.

Highly-parallelized simulation of a pixelated LArTPC on a GPU

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, Z. Ahmad, J. Ahmed, B. Aimard, F. Akbar, K. Allison, S. Alonso Monsalve, M. Alrashed, C. Alt, A. Alton, R. Alvarez, P. Amedo, J. Anderson , et al. (1282 additional authors not shown)

Abstract: The rapid development of general-purpose computing on graphics processing units (GPGPU) is allowing the implementation of highly-parallelized Monte Carlo simulation chains for particle physics experiments. This technique is particularly suitable for the simulation of a pixelated charge readout for time projection chambers, given the large number of channels that this technology employs. Here we pr… ▽ More The rapid development of general-purpose computing on graphics processing units (GPGPU) is allowing the implementation of highly-parallelized Monte Carlo simulation chains for particle physics experiments. This technique is particularly suitable for the simulation of a pixelated charge readout for time projection chambers, given the large number of channels that this technology employs. Here we present the first implementation of a full microphysical simulator of a liquid argon time projection chamber (LArTPC) equipped with light readout and pixelated charge readout, developed for the DUNE Near Detector. The software is implemented with an end-to-end set of GPU-optimized algorithms. The algorithms have been written in Python and translated into CUDA kernels using Numba, a just-in-time compiler for a subset of Python and NumPy instructions. The GPU implementation achieves a speed up of four orders of magnitude compared with the equivalent CPU version. The simulation of the current induced on $10^3$ pixels takes around 1 ms on the GPU, compared with approximately 10 s on the CPU. The results of the simulation are compared against data from a pixel-readout LArTPC prototype. △ Less

Submitted 28 February, 2023; v1 submitted 19 December, 2022; originally announced December 2022.

Comments: 26 pages, 15 figures

Report number: FERMILAB-PUB-22-926-LBNF

Identification and reconstruction of low-energy electrons in the ProtoDUNE-SP detector

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, Z. Ahmad, J. Ahmed, B. Aimard, F. Akbar, K. Allison, S. Alonso Monsalve, M. Alrashed, C. Alt, A. Alton, R. Alvarez, P. Amedo, J. Anderson , et al. (1235 additional authors not shown)

Abstract: Measurements of electrons from $ν_e$ interactions are crucial for the Deep Underground Neutrino Experiment (DUNE) neutrino oscillation program, as well as searches for physics beyond the standard model, supernova neutrino detection, and solar neutrino measurements. This article describes the selection and reconstruction of low-energy (Michel) electrons in the ProtoDUNE-SP detector. ProtoDUNE-SP is… ▽ More Measurements of electrons from $ν_e$ interactions are crucial for the Deep Underground Neutrino Experiment (DUNE) neutrino oscillation program, as well as searches for physics beyond the standard model, supernova neutrino detection, and solar neutrino measurements. This article describes the selection and reconstruction of low-energy (Michel) electrons in the ProtoDUNE-SP detector. ProtoDUNE-SP is one of the prototypes for the DUNE far detector, built and operated at CERN as a charged particle test beam experiment. A sample of low-energy electrons produced by the decay of cosmic muons is selected with a purity of 95%. This sample is used to calibrate the low-energy electron energy scale with two techniques. An electron energy calibration based on a cosmic ray muon sample uses calibration constants derived from measured and simulated cosmic ray muon events. Another calibration technique makes use of the theoretically well-understood Michel electron energy spectrum to convert reconstructed charge to electron energy. In addition, the effects of detector response to low-energy electron energy scale and its resolution including readout electronics threshold effects are quantified. Finally, the relation between the theoretical and reconstructed low-energy electron energy spectrum is derived and the energy resolution is characterized. The low-energy electron selection presented here accounts for about 75% of the total electron deposited energy. After the addition of lost energy using a Monte Carlo simulation, the energy resolution improves from about 40% to 25% at 50~MeV. These results are used to validate the expected capabilities of the DUNE far detector to reconstruct low-energy electrons. △ Less

Submitted 31 May, 2023; v1 submitted 2 November, 2022; originally announced November 2022.

Comments: 19 pages, 10 figures

Report number: FERMILAB-PUB-22-784, CERN-EP-DRAFT-MISC-2022-008

Journal ref: Phys. Rev. D 107, 092012 (2023)

Study of the Global Alignment for the DAMPE Detector

Authors: Yu-Xin Cui, Peng-Xiong Ma, Guan-Wen Yuan, Chuan Yue, Xiang Li, Shi-Jun Lei, Jian Wu

Abstract: The Dark Matter Particle Explorer (DAMPE) is designed as a high energy particle detector for probing cosmic-rays and $γ-$rays in a wide energy range. The trajectory of the incident particle is mainly measured by the Silicon-Tungsten tracKer-converter (STK) sub-detector, which heavily depends on the precise internal alignment correction as well as the accuracy of the global coordinate system. In th… ▽ More The Dark Matter Particle Explorer (DAMPE) is designed as a high energy particle detector for probing cosmic-rays and $γ-$rays in a wide energy range. The trajectory of the incident particle is mainly measured by the Silicon-Tungsten tracKer-converter (STK) sub-detector, which heavily depends on the precise internal alignment correction as well as the accuracy of the global coordinate system. In this work, we carried out a global alignment method to validate the potential displacement of these sub-detectors, and particularly demonstrated that the track reconstruction of STK can well satisfy the required objectives by means of comparing flight data and simulations. △ Less

Submitted 19 September, 2022; originally announced September 2022.

Comments: 18 pages, 11 figures

Search for relativistic fractionally charged particles in space

Authors: DAMPE Collaboration, F. Alemanno, C. Altomare, Q. An, P. Azzarello, F. C. T. Barbato, P. Bernardini, X. J. Bi, M. S. Cai, E. Casilli, E. Catanzani, J. Chang, D. Y. Chen, J. L. Chen, Z. F. Chen, M. Y. Cui, T. S. Cui, Y. X. Cui, H. T. Dai, A. De-Benedittis, I. De Mitri, F. de Palma, M. Deliyergiyev, A. Di Giovanni, M. Di Santo , et al. (126 additional authors not shown)

Abstract: More than a century after the performance of the oil drop experiment, the possible existence of fractionally charged particles FCP still remains unsettled. The search for FCPs is crucial for some extensions of the Standard Model in particle physics. Most of the previously conducted searches for FCPs in cosmic rays were based on experiments underground or at high altitudes. However, there have been… ▽ More More than a century after the performance of the oil drop experiment, the possible existence of fractionally charged particles FCP still remains unsettled. The search for FCPs is crucial for some extensions of the Standard Model in particle physics. Most of the previously conducted searches for FCPs in cosmic rays were based on experiments underground or at high altitudes. However, there have been few searches for FCPs in cosmic rays carried out in orbit other than AMS-01 flown by a space shuttle and BESS by a balloon at the top of the atmosphere. In this study, we conduct an FCP search in space based on on-orbit data obtained using the DArk Matter Particle Explorer (DAMPE) satellite over a period of five years. Unlike underground experiments, which require an FCP energy of the order of hundreds of GeV, our FCP search starts at only a few GeV. An upper limit of $6.2\times 10^{-10}~~\mathrm{cm^{-2}sr^{-1} s^{-1}}$ is obtained for the flux. Our results demonstrate that DAMPE exhibits higher sensitivity than experiments of similar types by three orders of magnitude that more stringently restricts the conditions for the existence of FCP in primary cosmic rays. △ Less

Submitted 9 September, 2022; originally announced September 2022.

Comments: 19 pages, 6 figures, accepted by PRD

Report number: 106, 063026

Journal ref: Physical Review D 106.6 (2022): 063026

Reconstruction of interactions in the ProtoDUNE-SP detector with Pandora

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, Z. Ahmad, J. Ahmed, B. Aimard, F. Akbar, B. Ali-Mohammadzadeh, K. Allison, S. Alonso Monsalve, M. AlRashed, C. Alt, A. Alton, R. Alvarez, P. Amedo , et al. (1203 additional authors not shown)

Abstract: The Pandora Software Development Kit and algorithm libraries provide pattern-recognition logic essential to the reconstruction of particle interactions in liquid argon time projection chamber detectors. Pandora is the primary event reconstruction software used at ProtoDUNE-SP, a prototype for the Deep Underground Neutrino Experiment far detector. ProtoDUNE-SP, located at CERN, is exposed to a char… ▽ More The Pandora Software Development Kit and algorithm libraries provide pattern-recognition logic essential to the reconstruction of particle interactions in liquid argon time projection chamber detectors. Pandora is the primary event reconstruction software used at ProtoDUNE-SP, a prototype for the Deep Underground Neutrino Experiment far detector. ProtoDUNE-SP, located at CERN, is exposed to a charged-particle test beam. This paper gives an overview of the Pandora reconstruction algorithms and how they have been tailored for use at ProtoDUNE-SP. In complex events with numerous cosmic-ray and beam background particles, the simulated reconstruction and identification efficiency for triggered test-beam particles is above 80% for the majority of particle type and beam momentum combinations. Specifically, simulated 1 GeV/$c$ charged pions and protons are correctly reconstructed and identified with efficiencies of 86.1$\pm0.6$% and 84.1$\pm0.6$%, respectively. The efficiencies measured for test-beam data are shown to be within 5% of those predicted by the simulation. △ Less

Submitted 17 July, 2023; v1 submitted 29 June, 2022; originally announced June 2022.

Comments: 39 pages, 20 figures. Accepted version. Published version available in Eur. Phys. J. C 83, 618 (2023) https://doi.org/10.1140/epjc/s10052-023-11733-2

Report number: FERMILAB-PUB-22-488-AD-ESH-LBNF-ND-SCD, CERN-EP-DRAFT-MISC-2022-007

Journal ref: Eur. Phys. J. C 83, 618 (2023)

Spontaneous Radiative Cooling to Enhance the Operational Stability of Perovskite Solar Cells via a Black-body-like Full Carbon Electrode

Authors: Bingcheng Yu, Jiangjian Shi, Yiming Li, Shan Tan, Yuqi Cui, Fanqi Meng, Huijue Wu, Yanhong Luo, Dongmei Li, Qingbo Meng

Abstract: Operational stability of perovskite solar cells is remarkably influenced by the device temperature, therefore, decreasing the interior temperature of the device is one of the most effective approaches to prolong the service life. Herein, we introduce the spontaneous radiative cooling effect into the perovskite solar cell and amplified this effect via functional structure design of a full-carbon el… ▽ More Operational stability of perovskite solar cells is remarkably influenced by the device temperature, therefore, decreasing the interior temperature of the device is one of the most effective approaches to prolong the service life. Herein, we introduce the spontaneous radiative cooling effect into the perovskite solar cell and amplified this effect via functional structure design of a full-carbon electrode (F-CE). Firstly, with interface engineering, >19% and >23% power conversion efficiencies of F-CE based inorganic CsPbI3 and hybrid perovskite solar cells have been achieved, respectively, both of which are the highest reported efficiencies based on carbon electrode and are comparative to the results for metal electrodes. Highly efficient thermal radiation of this F-CE can reduce the temperature of the operating cell by about 10 °C. Compared with the conventional metal electrode-based control cells, the operational stability of the above two types of cells have been significantly improved due to this cooling effect. Especially, the CsPbI3 PSCs exhibited no efficiency degradation after 2000 hours of continuous operational tracking. △ Less

Submitted 25 May, 2022; originally announced May 2022.

Seeing Around Obstacles with Terahertz Waves

Authors: Yiran Cui, Georgios C. Trichopoulos

Abstract: Traditional imaging systems, such as the eye or cameras, image scenes that lie in the direct line-of-sight (LoS). Most objects are opaque in the optical and infrared regimes and can limit dramatically the field of view (FoV). Current approaches to see around occlusions exploit the multireflection propagation of signals from neighboring surfaces either in the microwave or the optical bands. Using l… ▽ More Traditional imaging systems, such as the eye or cameras, image scenes that lie in the direct line-of-sight (LoS). Most objects are opaque in the optical and infrared regimes and can limit dramatically the field of view (FoV). Current approaches to see around occlusions exploit the multireflection propagation of signals from neighboring surfaces either in the microwave or the optical bands. Using lower frequency signals anatomical information is limited and images suffer from clutter while optical systems encounter diffuse scattering from most surfaces and suffer from path loss, thus limiting the imaging distance. In this work, we show that terahertz (THz) waves can be used to extend visibility to non-line-of-sight (NLoS) while combining the advantages of both spectra. The material properties and roughness of most building surfaces allow for a unique combination of both diffuse and strong specular scattering. As a result, most building surfaces behave as lossy mirrors that enable propagation paths between a THz camera and the NLoS scenes. We propose a mirror folding algorithm that tracks the multireflection propagation of THz waves to 1) correct the image from cluttering and 2) see around occlusions without a priori knowledge of the scene geometry and material properties. To validate the feasibility of the proposed NLoS imaging approach, we carried out a numerical analysis and developed two THz imaging systems to demonstrate real-world NLoS imaging experiments in sub-THz bands (270-300 GHz). The results show the capability of THz radar imaging systems to recover both the geometry and pose of LoS and NLoS objects with centimeter-scale resolution in various multipath propagation scenarios. THz NLoS imaging can operate in low visibility conditions (e.g., night, strong ambient light, smoke) and uses computationally inexpensive image reconstruction algorithms. △ Less

Submitted 10 May, 2022; originally announced May 2022.

Separation of track- and shower-like energy deposits in ProtoDUNE-SP using a convolutional neural network

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, A. Aduszkiewicz, J. Aguilar, Z. Ahmad, J. Ahmed, B. Aimard, B. Ali-Mohammadzadeh, T. Alion, K. Allison, S. Alonso Monsalve, M. AlRashed, C. Alt, A. Alton, R. Alvarez, P. Amedo, J. Anderson , et al. (1204 additional authors not shown)

Abstract: Liquid argon time projection chamber detector technology provides high spatial and calorimetric resolutions on the charged particles traversing liquid argon. As a result, the technology has been used in a number of recent neutrino experiments, and is the technology of choice for the Deep Underground Neutrino Experiment (DUNE). In order to perform high precision measurements of neutrinos in the det… ▽ More Liquid argon time projection chamber detector technology provides high spatial and calorimetric resolutions on the charged particles traversing liquid argon. As a result, the technology has been used in a number of recent neutrino experiments, and is the technology of choice for the Deep Underground Neutrino Experiment (DUNE). In order to perform high precision measurements of neutrinos in the detector, final state particles need to be effectively identified, and their energy accurately reconstructed. This article proposes an algorithm based on a convolutional neural network to perform the classification of energy deposits and reconstructed particles as track-like or arising from electromagnetic cascades. Results from testing the algorithm on data from ProtoDUNE-SP, a prototype of the DUNE far detector, are presented. The network identifies track- and shower-like particles, as well as Michel electrons, with high efficiency. The performance of the algorithm is consistent between data and simulation. △ Less

Submitted 30 June, 2022; v1 submitted 31 March, 2022; originally announced March 2022.

Comments: 31 pages, 15 figures

Report number: FERMILAB-PUB-22-240-AD-ESH-LBNF-ND-SCD, CERN-EP-2022-077

Journal ref: Eur.Phys.J.C 82 (2022) 10, 903

Scintillation light detection in the 6-m drift-length ProtoDUNE Dual Phase liquid argon TPC

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, A. Aduszkiewicz, J. Aguilar, Z. Ahmad, J. Ahmed, B. Aimard, B. Ali-Mohammadzadeh, T. Alion, K. Allison, S. Alonso Monsalve, M. AlRashed, C. Alt, A. Alton, R. Alvarez, P. Amedo, J. Anderson , et al. (1202 additional authors not shown)

Abstract: DUNE is a dual-site experiment for long-baseline neutrino oscillation studies, neutrino astrophysics and nucleon decay searches. ProtoDUNE Dual Phase (DP) is a 6x6x6m3 liquid argon time-projection-chamber (LArTPC) that recorded cosmic-muon data at the CERN Neutrino Platform in 2019-2020 as a prototype of the DUNE Far Detector. Charged particles propagating through the LArTPC produce ionization and… ▽ More DUNE is a dual-site experiment for long-baseline neutrino oscillation studies, neutrino astrophysics and nucleon decay searches. ProtoDUNE Dual Phase (DP) is a 6x6x6m3 liquid argon time-projection-chamber (LArTPC) that recorded cosmic-muon data at the CERN Neutrino Platform in 2019-2020 as a prototype of the DUNE Far Detector. Charged particles propagating through the LArTPC produce ionization and scintillation light. The scintillation light signal in these detectors can provide the trigger for non-beam events. In addition, it adds precise timing capabilities and improves the calorimetry measurements. In ProtoDUNE-DP, scintillation and electroluminescence light produced by cosmic muons in the LArTPC is collected by photomultiplier tubes placed up to 7 m away from the ionizing track. In this paper, the ProtoDUNE-DP photon detection system performance is evaluated with a particular focus on the different wavelength shifters, such as PEN and TPB, and the use of Xe-doped LAr, considering its future use in giant LArTPCs. The scintillation light production and propagation processes are analyzed and a comparison of simulation to data is performed, improving understanding of the liquid argon properties △ Less

Submitted 3 June, 2022; v1 submitted 30 March, 2022; originally announced March 2022.

Comments: 31 pages, 29 figures

Report number: CERN-EP-DRAFT-MISC-2022-003; FERMILAB-PUB-22-242-LBNF

On-demand harnessing of photonic soliton molecules

Authors: Shilong Liu, Yudong Cui, Ebrahim Karimi, Boris A. Malomed

Abstract: Soliton molecules (SMs) are fundamentally important modes in nonlinear optical systems. It is a challenge to experimentally produce SMs with a required temporal separation in mode-locked fiber lasers. Here, we propose and realize an experimental scenario for harnessing SM dynamics in a laser setup. In particular, we tailor SMs in a mode-locked laser controlled by second-order group-velocity disper… ▽ More Soliton molecules (SMs) are fundamentally important modes in nonlinear optical systems. It is a challenge to experimentally produce SMs with a required temporal separation in mode-locked fiber lasers. Here, we propose and realize an experimental scenario for harnessing SM dynamics in a laser setup. In particular, we tailor SMs in a mode-locked laser controlled by second-order group-velocity dispersion and dispersion losses: the real part of dispersion maintains the balance between the dispersion and nonlinearity, while the dispersion loss determines the balance of gain and losses. The experimental results demonstrate that the dispersion loss makes it possible to select desired values of the temporal separation (TS) in bound pairs of SMs in the system. Tunability of the SM's central wavelength and the corresponding hysteresis are addressed too. The demonstrated regime allows us to create multiple SMs with preselected values of the TS and central wavelength, which shows the potential of our setup for the design of optical data-processing schemes. △ Less

Submitted 4 February, 2022; originally announced February 2022.

Comments: To be published in Optica

Cold Atoms in Space: Community Workshop Summary and Proposed Road-Map

Authors: Ivan Alonso, Cristiano Alpigiani, Brett Altschul, Henrique Araujo, Gianluigi Arduini, Jan Arlt, Leonardo Badurina, Antun Balaz, Satvika Bandarupally, Barry C Barish Michele Barone, Michele Barsanti, Steven Bass, Angelo Bassi, Baptiste Battelier, Charles F. A. Baynham, Quentin Beaufils, Aleksandar Belic, Joel Berge, Jose Bernabeu, Andrea Bertoldi, Robert Bingham, Sebastien Bize, Diego Blas, Kai Bongs, Philippe Bouyer , et al. (224 additional authors not shown)

Abstract: We summarize the discussions at a virtual Community Workshop on Cold Atoms in Space concerning the status of cold atom technologies, the prospective scientific and societal opportunities offered by their deployment in space, and the developments needed before cold atoms could be operated in space. The cold atom technologies discussed include atomic clocks, quantum gravimeters and accelerometers, a… ▽ More We summarize the discussions at a virtual Community Workshop on Cold Atoms in Space concerning the status of cold atom technologies, the prospective scientific and societal opportunities offered by their deployment in space, and the developments needed before cold atoms could be operated in space. The cold atom technologies discussed include atomic clocks, quantum gravimeters and accelerometers, and atom interferometers. Prospective applications include metrology, geodesy and measurement of terrestrial mass change due to, e.g., climate change, and fundamental science experiments such as tests of the equivalence principle, searches for dark matter, measurements of gravitational waves and tests of quantum mechanics. We review the current status of cold atom technologies and outline the requirements for their space qualification, including the development paths and the corresponding technical milestones, and identifying possible pathfinder missions to pave the way for missions to exploit the full potential of cold atoms in space. Finally, we present a first draft of a possible road-map for achieving these goals, that we propose for discussion by the interested cold atom, Earth Observation, fundamental physics and other prospective scientific user communities, together with ESA and national space and research funding agencies. △ Less

Submitted 19 January, 2022; originally announced January 2022.

Comments: Summary of the Community Workshop on Cold Atoms in Space and corresponding Road-map: https://indico.cern.ch/event/1064855/

Journal ref: EPJ Quantum Technol. 9, 30 (2022)

Numerical investigation of the scale effects of rock bridges

Authors: Fengchang Bu, Lei Xue, Mengyang Zhai, Chao Xu, Yuan Cui

Abstract: The concept of joint persistence has been widely used to study the mechanics and failure processes of rock masses benefitting from the simplicity of statistical linear weighing of the discontinuity. Nevertheless, this term neglects the scale effects of rock bridges, meaning that the same joint persistence may refer to different numbers and spacings of rock bridges, leading to erroneous equivalent… ▽ More The concept of joint persistence has been widely used to study the mechanics and failure processes of rock masses benefitting from the simplicity of statistical linear weighing of the discontinuity. Nevertheless, this term neglects the scale effects of rock bridges, meaning that the same joint persistence may refer to different numbers and spacings of rock bridges, leading to erroneous equivalent rock mass responses. To fill in this gap, an intact rock bridge was dispersed as multi rock bridges while maintaining a constant joint persistence, subjected to direct shear by conducting numerical simulations employing Universal Distinct Element Code (UDEC). In this way, scale effects of rock bridges were investigated from the perspective of load-displacement curves, stress and displacement fields, crack propagations and AE characterizations. Results revealed that the shear resistance and the area and value of stress-concentration decreased with increasing dispersion. Furthermore, uneven distribution of displacement fields in an arc manner moving and degrading away from the load was first observed, indicating the sequential failure of multi rock bridges. It was also found that the propagation of wing cracks was insensitive to scale, while the asperity of macro shear fracture mainly formed by secondary cracks decreased with increasing dispersion. In addition, increasing dispersion of rock bridges would overlap the failure precursors identified by intense AE activities. Based on the abovementioned results, we evaluated existing methods to characterize the joint persistence, and a threshold was observed to possibly define a rock bridge. △ Less

Submitted 11 January, 2022; originally announced January 2022.

New metal-plastic hybrid additive manufacturing strategy: Fabrication of arbitrary metal-patterns on external and even internal surfaces of 3D plastic structures

Authors: Kewei Song, Yue Cui, Tiannan Tao, Xiangyi Meng, Michinari Sone, Masahiro Yoshino, Shinjiro Umezu, Hirotaka Sato

Abstract: Constructing precise micro-nano metal patterns on complex three-dimensional (3D) plastic parts allows the fabrication of functional devices for advanced applications. However, this patterning is currently expensive and requires complex processes with long manufacturing lead time. The present work demonstrates a process for the fabrication of micro-nano 3D metal-plastic composite structures with ar… ▽ More Constructing precise micro-nano metal patterns on complex three-dimensional (3D) plastic parts allows the fabrication of functional devices for advanced applications. However, this patterning is currently expensive and requires complex processes with long manufacturing lead time. The present work demonstrates a process for the fabrication of micro-nano 3D metal-plastic composite structures with arbitrarily complex shapes. In this approach, a light-cured resin is modified to prepare an active precursor capable of allowing subsequent electroless plating (ELP). A multi-material digital light processing 3D printer was newly developed to enable the fabrication of parts containing regions made of either standard resin or active precursor resin nested within each other. Selective 3D ELP processing of such parts provided various metal-plastic composite parts having complicated hollow micro-nano structures with specific topological relationships on a size scale as small as 40 um. Using this technique, 3D metal topologies that cannot be manufactured by traditional methods are possible, and metal patterns can be produced inside plastic parts as a means of further miniaturizing electronic devices. The proposed method can also generate metal coatings exhibiting improved adhesion of metal to plastic substrate. Based on this technique, several sensors composed of different functional nonmetallic materials and specific metal patterns were designed and fabricated. The present results demonstrate the viability of the proposed method and suggest potential applications in the fields of smart 3D micro-nano electronics, 3D wearable devices, micro/nano-sensors, and health care. △ Less

Submitted 21 December, 2021; originally announced December 2021.

Degradation Mechanism of Perovskite under High Charge Carrier Density Condition

Authors: Guohui Li, Huihui Pi, Yanfu Wei, Bolin Zhou, Ya Gao, Rong Wen, Yuying Hao, Han Zhang, Beng S. Ong, Yanxia Cui

Abstract: Extensive studies have focused on degradation of perovskite at low charge carrier density (<10^16 cm^-3), but few have surveyed the degradation mechanism at high charge carrier density (~10^18 cm^-3). Here, we investigate the degradation mechanisms of perovskite under high charge carrier conditions. Unlike the observations in previous works, we find that MAPbI3 degradation starts at surface defect… ▽ More Extensive studies have focused on degradation of perovskite at low charge carrier density (<10^16 cm^-3), but few have surveyed the degradation mechanism at high charge carrier density (~10^18 cm^-3). Here, we investigate the degradation mechanisms of perovskite under high charge carrier conditions. Unlike the observations in previous works, we find that MAPbI3 degradation starts at surface defects and progressing from the surface defects towards neighboring regions under high charge carrier density condition. By using PbI2 passivation, the defect-initiated degradation is significantly suppressed and the nanoplatelet degrades in a layer-by-layer way, enabling the MAPbI3 laser sustain for 4500 s (2.7*10^7 pulses), which is almost 3 times longer than that of the nanoplatelet laser without passivation. Meanwhile, the PbI2 passivated MAPbI3 nanoplatelet laser with the nanoplatelet cavity displaying a maximum quality factor up to ~7800, the highest reported for all MAPbI3 nanoplatelet cavities. Furthermore, a high stability MAPbI3 nanoplatelet laser that can last for 8500 s (5.1*10^7 pulses) is demonstrated based on a dual passivation strategy, by retarding the defect-initiated degradation and surface-initiated degradation, simultaneously. This work provides in-depth insights for understanding the degradation of perovskite at high charge carrier density. △ Less

Submitted 16 December, 2021; originally announced December 2021.

Comments: 37 pages,19 figures

High-responsivity, High-detectivity Photomultiplication Organic Photodetector Realized by a Metal-Insulator-Semiconductor Tunneling Junction

Authors: Linlin Shi, Ning Li, Ting Ji, Ye Zhang, Wenyan Wang, Lin Feng, Rong Wen, Yuying Hao, Kaiying Wang, Furong Zhu, Guohui Li, Beng S. Ong, Yanxia Cui

Abstract: Organic photodetectors (OPDs) possess bright prospects in applications of medical imaging and wearable electronics due to the advantages such as low cost, good biocompatibility, and good flexibility. Photomultiplication OPDs (PM-OPDs) enabled by the trap-assisted carrier tunneling injection effect exhibit external quantum efficiencies far greater than unity, thus the acquired responsivities are ex… ▽ More Organic photodetectors (OPDs) possess bright prospects in applications of medical imaging and wearable electronics due to the advantages such as low cost, good biocompatibility, and good flexibility. Photomultiplication OPDs (PM-OPDs) enabled by the trap-assisted carrier tunneling injection effect exhibit external quantum efficiencies far greater than unity, thus the acquired responsivities are extremely high. However, the reported PM-OPDs with high responsivity performances are all accompanied by high dark currents due to the introduction of carrier traps, which inevitably results in inferior detectivities. In this work, we modify a P3HT:PCBM donor-rich PM-OPD by introducing an atomically thin Al2O3 interfacial layer through the ALD technique, obtaining a high responsivity of 8294 A/W and high detectivity of 6.76*10^14 Jones, simultaneously, both of which are among the highest reported for bulk heterojunction PM-OPDs. Ascribed to the introduction of the atomically thin Al2O3 layer, the metal-insulator-semiconductor (MIS) tunneling junction is formed, which brings forward a suppressed dark current along with an increased amounts of holes tunneling under forward bias. Meanwhile, the weak light detection limit of the modified PM-OPD within the linear response range reaches the level of nW/cm2. Based on the proposed PM-OPD, a proof-of-concept image sensor with 26*26 pixels is demonstrated, which can respond to both ultraviolet light and visible light. The PM-OPD based sensor arrays can find broad applications for medical imaging, wearable electronics, etc. △ Less

Submitted 8 October, 2021; originally announced October 2021.

Comments: 25 pages, 12 figures, 1 table

Schrödinger's cat state of optical parallel universes

Authors: Yu-Qing Cui, Tian-Ming Zhao, Rong-Xin Miao, Jin-Dong Wang, Huanyang Chen

Abstract: Parallel worlds are imaginative ideas in quantum mechanics and cosmology. The superpositions of parallel worlds are novel states of quantum gravity and have no classical correspondences generally. In this letter, we investigate the superposition or the Schrödinger's cat state of optical parallel worlds, which could be realized in laboratory and may shed some light on the detection of parallel univ… ▽ More Parallel worlds are imaginative ideas in quantum mechanics and cosmology. The superpositions of parallel worlds are novel states of quantum gravity and have no classical correspondences generally. In this letter, we investigate the superposition or the Schrödinger's cat state of optical parallel worlds, which could be realized in laboratory and may shed some light on the detection of parallel universes in a real world. We propose two realizable experimental schemes, which enable to explore the mysterious `parallel universes' by a Mach-Zehnder interferometer. The first one is based on an atomic ensemble in a superposition state, which is a fat Schrödinger's cat state. The second one is to prepare a photon in a superposition of different paths, where each path lies in an optical parallel universe. △ Less

Submitted 31 October, 2021; v1 submitted 24 October, 2021; originally announced October 2021.

Comments: 5 gages, 5 figure, typos corrected, references added, comments welcome!

Measurement of single-cell elasticity by nanodiamond-sensing of non-local deformation

Authors: Yue Cui, Weng-Hang Leong, Chu-Feng Liu, Kangwei Xia, Xi Feng, Csilla Gergely, Ren-Bao Liu, Quan Li

Abstract: Nano-indentation based on, e.g., atomic force microscopy (AFM), can measure single cell elasticity with high spatial resolution and sensitivity, but relating the data to cell mechanical properties depends on modeling that requires knowledge about the local contact between the indentation tip and the material, which is unclear in most cases. Here we use the orientation sensing by nitrogen-vacancy c… ▽ More Nano-indentation based on, e.g., atomic force microscopy (AFM), can measure single cell elasticity with high spatial resolution and sensitivity, but relating the data to cell mechanical properties depends on modeling that requires knowledge about the local contact between the indentation tip and the material, which is unclear in most cases. Here we use the orientation sensing by nitrogen-vacancy centers in nanodiamonds to chart the non-local deformation of fixed HeLa cells induced by AFM indentation, providing data for studying cell mechanics without requiring detailed knowledge about the local contact. The competition between the elasticity and capillarity on the cells is observed. We show that the apparent elastic moduli of the cells would have been overestimated if the capillarity is not considered (as in most previous studies using local depth-loading data). We also find reduction of both elastic moduli and surface tensions due to depolymerization of the actin cytoskeleton structure. This work demonstrates that, under shallow indentation, the nanodiamond sensing of non-local deformation with nanometer precision is particularly suitable for studying mechanics of cells. △ Less

Submitted 25 September, 2021; originally announced September 2021.

Comments: 28 pages (4 figures) + 12 pages (10 figures)

Low exposure long-baseline neutrino oscillation sensitivity of the DUNE experiment

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, D. Adams, M. Adinolfi, A. Aduszkiewicz, J. Aguilar, Z. Ahmad, J. Ahmed, B. Aimard, B. Ali-Mohammadzadeh, T. Alion, K. Allison, S. Alonso Monsalve, M. AlRashed, C. Alt, A. Alton, P. Amedo, J. Anderson, C. Andreopoulos, M. Andreotti , et al. (1132 additional authors not shown)

Abstract: The Deep Underground Neutrino Experiment (DUNE) will produce world-leading neutrino oscillation measurements over the lifetime of the experiment. In this work, we explore DUNE's sensitivity to observe charge-parity violation (CPV) in the neutrino sector, and to resolve the mass ordering, for exposures of up to 100 kiloton-megawatt-years (kt-MW-yr). The analysis includes detailed uncertainties on t… ▽ More The Deep Underground Neutrino Experiment (DUNE) will produce world-leading neutrino oscillation measurements over the lifetime of the experiment. In this work, we explore DUNE's sensitivity to observe charge-parity violation (CPV) in the neutrino sector, and to resolve the mass ordering, for exposures of up to 100 kiloton-megawatt-years (kt-MW-yr). The analysis includes detailed uncertainties on the flux prediction, the neutrino interaction model, and detector effects. We demonstrate that DUNE will be able to unambiguously resolve the neutrino mass ordering at a 3$σ$ (5$σ$) level, with a 66 (100) kt-MW-yr far detector exposure, and has the ability to make strong statements at significantly shorter exposures depending on the true value of other oscillation parameters. We also show that DUNE has the potential to make a robust measurement of CPV at a 3$σ$ level with a 100 kt-MW-yr exposure for the maximally CP-violating values $δ_{\rm CP}} = \pmπ/2$. Additionally, the dependence of DUNE's sensitivity on the exposure taken in neutrino-enhanced and antineutrino-enhanced running is discussed. An equal fraction of exposure taken in each beam mode is found to be close to optimal when considered over the entire space of interest. △ Less

Submitted 3 September, 2021; originally announced September 2021.

Report number: FERMILAB-PUB-21-391-ND

Design, construction and operation of the ProtoDUNE-SP Liquid Argon TPC

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, D. Adams, M. Adinolfi, A. Aduszkiewicz, J. Aguilar, Z. Ahmad, J. Ahmed, B. Ali-Mohammadzadeh, T. Alion, K. Allison, S. Alonso Monsalve, M. Alrashed, C. Alt, A. Alton, P. Amedo, J. Anderson, C. Andreopoulos, M. Andreotti, M. P. Andrews , et al. (1158 additional authors not shown)

Abstract: The ProtoDUNE-SP detector is a single-phase liquid argon time projection chamber (LArTPC) that was constructed and operated in the CERN North Area at the end of the H4 beamline. This detector is a prototype for the first far detector module of the Deep Underground Neutrino Experiment (DUNE), which will be constructed at the Sandford Underground Research Facility (SURF) in Lead, South Dakota, USA.… ▽ More The ProtoDUNE-SP detector is a single-phase liquid argon time projection chamber (LArTPC) that was constructed and operated in the CERN North Area at the end of the H4 beamline. This detector is a prototype for the first far detector module of the Deep Underground Neutrino Experiment (DUNE), which will be constructed at the Sandford Underground Research Facility (SURF) in Lead, South Dakota, USA. The ProtoDUNE-SP detector incorporates full-size components as designed for DUNE and has an active volume of $7\times 6\times 7.2$~m$^3$. The H4 beam delivers incident particles with well-measured momenta and high-purity particle identification. ProtoDUNE-SP's successful operation between 2018 and 2020 demonstrates the effectiveness of the single-phase far detector design. This paper describes the design, construction, assembly and operation of the detector components. △ Less

Submitted 23 September, 2021; v1 submitted 4 August, 2021; originally announced August 2021.

Inelastic electron transfer in olfaction: multiphonons processes

Authors: Shu-Quan Zhang, Yu Cui, Xue-Wei Li, Yong Sun, Zi-Wu Wang

Abstract: Inelastic electron transfer being regarded as one of the potential mechanisms to explain the odorant recognition in the atomic-scale processes is still a matter of intense debate. Here, we propose multiphonon processes of electrons transfer using the Markvart model and calculate their lifetimes with values of key parameters widely adopted in olfactory systems. We find that these multiphonon proces… ▽ More Inelastic electron transfer being regarded as one of the potential mechanisms to explain the odorant recognition in the atomic-scale processes is still a matter of intense debate. Here, we propose multiphonon processes of electrons transfer using the Markvart model and calculate their lifetimes with values of key parameters widely adopted in olfactory systems. We find that these multiphonon processes are as quickly as the single phonon process, which suggest that contributions from different phonon modes of odorant molecule for electrons transfer in olfaction should be included. Meanwhile, temperature dependence of electron transfer could be analyzed effectively based on the reorganization energy is expanded into the linewidth of multiphonon processes. Our theoretical results not only enrich the knowledge of the mechanism of the olfaction recognition, but also provide insights for quantum processes in the biological system. △ Less

Submitted 29 July, 2021; originally announced July 2021.

In-situ tuned photoelectric properties of PtS$_2$ transistor

Authors: Yana Cui, Wentao Gong, Gang Zhao, Weike Wang

Abstract: Strain engineering is a powerful and widely used strategy for boosting the performance of electronic and optoelectronic devices. Here, we demonstrate an approach to tune the photoelectric properties of Platinum sulfide (PtS$_2$) by using a ferroelectric substrate PMN-PT as the strain generator. It is found that both the drain current and responsivity of the PtS$_2$ photodetector is directly couple… ▽ More Strain engineering is a powerful and widely used strategy for boosting the performance of electronic and optoelectronic devices. Here, we demonstrate an approach to tune the photoelectric properties of Platinum sulfide (PtS$_2$) by using a ferroelectric substrate PMN-PT as the strain generator. It is found that both the drain current and responsivity of the PtS$_2$ photodetector is directly coupled to the electrostriction of PMN-PT, showing a high strain-tuned ratio $10^{3}$, high responsivity up to $6.3\times 10^{3}$ A/W and detectivity of $9.3\times 10^{12}$ Jones. Additionally, a high photogain $\approx 5\times 10^{5}$ is obtained at a gate voltage Vg = 15 V. Our results provide an effective method for manipulating electrical properties and optimizing performance of two dimensional layered (2D) materials based optoelectronic devices. △ Less

Submitted 26 May, 2021; v1 submitted 25 May, 2021; originally announced May 2021.

Comments: 15 pages, 4 figures

Reconfigurable Multistate Optical Systems Enabled by VO2 Phase Transitions

Authors: Xiaoyang Duan, Samuel T. White, Yuanyuan Cui, Frank Neubrech, Yanfeng Gao, Richard F. Haglund, Na Liu

Abstract: Reconfigurable optical systems are the object of continuing, intensive research activities, as they hold great promise for realizing a new generation of compact, miniaturized, and flexible optical devices. However, current reconfigurable systems often tune only a single state variable triggered by an external stimulus, thus, leaving out many potential applications. Here we demonstrate a reconfigur… ▽ More Reconfigurable optical systems are the object of continuing, intensive research activities, as they hold great promise for realizing a new generation of compact, miniaturized, and flexible optical devices. However, current reconfigurable systems often tune only a single state variable triggered by an external stimulus, thus, leaving out many potential applications. Here we demonstrate a reconfigurable multistate optical system enabled by phase transitions in vanadium dioxide (VO2). By controlling the phase-transition characteristics of VO2 with simultaneous stimuli, the responses of the optical system can be reconfigured among multiple states. In particular, we show a quadruple-state dynamic plasmonic display that responds to both temperature tuning and hydrogen-doping. Furthermore, we introduce an electron-doping scheme to locally control the phase-transition behavior of VO2, enabling an optical encryption device encoded by multiple keys. Our work points the way toward advanced multistate reconfigurable optical systems, which substantially outperform current optical devices in both breadth of capabilities and functionalities. △ Less

Submitted 29 April, 2021; originally announced April 2021.

Journal ref: ACS Photonics 7, 11, 2958-2965 (2020)

LLM helps design and optimize photonic crystal surface emitting lasers

Authors: Renjie Li, Ceyao Zhang, Sixuan Mao, Hai Huang, Mou Zhong, Yiou Cui, Xiyuan Zhou, Feng Yin, Zhaoyu Zhang

Abstract: Conventional design and optimization of Photonic Crystal Surface Emitting Lasers (PCSEL) usually requires expert knowledge in semiconductor physics and optimization algorithms, which is also known as the inverse design problem. However, with the trend towards automation and depersonalization of the entire integrated circuits (IC) industry, the conventional method, with the drawback of being relati… ▽ More Conventional design and optimization of Photonic Crystal Surface Emitting Lasers (PCSEL) usually requires expert knowledge in semiconductor physics and optimization algorithms, which is also known as the inverse design problem. However, with the trend towards automation and depersonalization of the entire integrated circuits (IC) industry, the conventional method, with the drawback of being relatively labor-intensive and sub-optimal, warrants further refinement. This technical dilemma remained until the emergence of Large Language Models (LLMs), such as OpenAI's ChatGPT and Google's Bard. This paper explores the possibility of applying LLMs to machine learning-based design and optimization of PCSELs. Specifically, we utilize GPT3.5 and GPT4. By simply having conversations, GPT assisted us with writing Finite Difference Time Domain (FDTD) simulation code and deep reinforcement learning code to acquire the optimized PCSEL solution, spanning from the proposition of ideas to the realization of algorithms. Given that GPT will perform better when given detailed and specific questions, we break down the PCSEL design problem into a series of sub-problems and converse with GPT by posing open-ended heuristic questions rather than definitive commands. This paper shows that LLMs, such as ChatGPT, can guide the nanophotonic design and optimization processes, on both the conceptual and technical level, and we propose new human-AI co-design strategies and show their practical implications. We achieve a significant milestone for the first step towards an automated end to end nanophotonic design and production pipeline. △ Less

Submitted 11 August, 2023; v1 submitted 25 April, 2021; originally announced April 2021.

Comments: 14 pages,

Deep Underground Neutrino Experiment (DUNE) Near Detector Conceptual Design Report

Authors: A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, G. Adamov, D. Adams, M. Adinolfi, A. Aduszkiewicz, Z. Ahmad, J. Ahmed, T. Alion, S. Alonso Monsalve, M. Alrashed, C. Alt, A. Alton, P. Amedo, J. Anderson, C. Andreopoulos, M. P. Andrews, F. Andrianala, S. Andringa, N. Anfimov, A. Ankowski, M. Antonova, S. Antusch , et al. (1041 additional authors not shown)

Abstract: This report describes the conceptual design of the DUNE near detector This report describes the conceptual design of the DUNE near detector △ Less

Submitted 25 March, 2021; originally announced March 2021.

Comments: 314 pages, 185 figures

Report number: FERMILAB-PUB-21-067-E-LBNF-PPD-SCD-T

De-carbonization of global energy use during the COVID-19 pandemic

Authors: Zhu Liu, Biqing Zhu, Philippe Ciais, Steven J. Davis, Chenxi Lu, Haiwang Zhong, Piyu Ke, Yanan Cui, Zhu Deng, Duo Cui, Taochun Sun, Xinyu Dou, Jianguang Tan, Rui Guo, Bo Zheng, Katsumasa Tanaka, Wenli Zhao, Pierre Gentine

Abstract: The COVID-19 pandemic has disrupted human activities, leading to unprecedented decreases in both global energy demand and GHG emissions. Yet a little known that there is also a low carbon shift of the global energy system in 2020. Here, using the near-real-time data on energy-related GHG emissions from 30 countries (about 70% of global power generation), we show that the pandemic caused an unprece… ▽ More The COVID-19 pandemic has disrupted human activities, leading to unprecedented decreases in both global energy demand and GHG emissions. Yet a little known that there is also a low carbon shift of the global energy system in 2020. Here, using the near-real-time data on energy-related GHG emissions from 30 countries (about 70% of global power generation), we show that the pandemic caused an unprecedented de-carbonization of global power system, representing by a dramatic decrease in the carbon intensity of power sector that reached a historical low of 414.9 tCO2eq/GWh in 2020. Moreover, the share of energy derived from renewable and low-carbon sources (nuclear, hydro-energy, wind, solar, geothermal, and biomass) exceeded that from coal and oil for the first time in history in May of 2020. The decrease in global net energy demand (-1.3% in the first half of 2020 relative to the average of the period in 2016-2019) masks a large down-regulation of fossil-fuel-burning power plants supply (-6.1%) coincident with a surge of low-carbon sources (+6.2%). Concomitant changes in the diurnal cycle of electricity demand also favored low-carbon generators, including a flattening of the morning ramp, a lower midday peak, and delays in both the morning and midday load peaks in most countries. However, emission intensities in the power sector have since rebounded in many countries, and a key question for climate mitigation is thus to what extent countries can achieve and maintain lower, pandemic-level carbon intensities of electricity as part of a green recovery. △ Less

Submitted 5 February, 2021; originally announced February 2021.

Maxwell's demon-like nonreciprocity by non-Hermitian gyrotropic metasurfaces

Authors: Wenyan Wang, Wang Tat Yau, Yanxia Cui, Jin Wang, Kin Hung Fung

Abstract: We show that Maxwell's demon-like nonreciprocity can be supported in a class of non-Hermitian gyrotropic metasurfaces in the linear regime. The proposed metasurface functions as a transmission-only Maxwell's demon operating at a pair of photon energies. Based on multiple scattering theory, we construct a dual-dipole model to explain the underlying mechanism that leads to the antisymmetric nonrecip… ▽ More We show that Maxwell's demon-like nonreciprocity can be supported in a class of non-Hermitian gyrotropic metasurfaces in the linear regime. The proposed metasurface functions as a transmission-only Maxwell's demon operating at a pair of photon energies. Based on multiple scattering theory, we construct a dual-dipole model to explain the underlying mechanism that leads to the antisymmetric nonreciprocal transmission. The results may inspire new designs of compact nonreciprocal devices for photonics. △ Less

Submitted 23 April, 2021; v1 submitted 29 December, 2020; originally announced December 2020.

Comments: 6 pages, 5 figures

Journal ref: Phys. Rev. Research 3, 022006 (2021)

Construction and On-site Performance of the LHAASO WFCTA Camera

Authors: F. Aharonian, Q. An, Axikegu, L. X. Bai, Y. X. Bai, Y. W. Bao, D. Bastieri, X. J. Bi, Y. J. Bi, H. Cai, J. T. Cai, Z. Cao, Z. Cao, J. Chang, J. F. Chang, X. C. Chang, B. M. Chen, J. Chen, L. Chen, L. Chen, L. Chen, M. J. Chen, M. L. Chen, Q. H. Chen, S. H. Chen , et al. (234 additional authors not shown)

Abstract: The focal plane camera is the core component of the Wide Field-of-view Cherenkov/fluorescence Telescope Array (WFCTA) of the Large High-Altitude Air Shower Observatory (LHAASO). Because of the capability of working under moonlight without aging, silicon photomultipliers (SiPM) have been proven to be not only an alternative but also an improvement to conventional photomultiplier tubes (PMT) in this… ▽ More The focal plane camera is the core component of the Wide Field-of-view Cherenkov/fluorescence Telescope Array (WFCTA) of the Large High-Altitude Air Shower Observatory (LHAASO). Because of the capability of working under moonlight without aging, silicon photomultipliers (SiPM) have been proven to be not only an alternative but also an improvement to conventional photomultiplier tubes (PMT) in this application. Eighteen SiPM-based cameras with square light funnels have been built for WFCTA. The telescopes have collected more than 100 million cosmic ray events and preliminary results indicate that these cameras are capable of working under moonlight. The characteristics of the light funnels and SiPMs pose challenges (e.g. dynamic range, dark count rate, assembly techniques). In this paper, we present the design features, manufacturing techniques and performances of these cameras. Finally, the test facilities, the test methods and results of SiPMs in the cameras are reported here. △ Less

Submitted 4 July, 2021; v1 submitted 29 December, 2020; originally announced December 2020.

Comments: 45 pages, 21 figures, article

Journal ref: Eur. Phys. J. C 81, 657 (2021)