-
The Pixel Charging-up effect in Gas Micro-Pixel Detectors
Authors:
Difan Yi,
Qian Liu,
Hongbang Liu,
Fei Xie,
Huanbo Feng,
Lin Zhou,
Zuke Feng,
Yangheng Zheng
Abstract:
This study investigates the charging-up effect on the Topmetal-II- chip in Gas Micro-Pixel Detectors(GMPD). It is found that this effect differs from the charging-up typically observed in gas detector multiplier devices and increases the relative gain of the detector. The research indicates that this effect originates from the accumulation of charges on the insulating layer of the chip's pixel sur…
▽ More
This study investigates the charging-up effect on the Topmetal-II- chip in Gas Micro-Pixel Detectors(GMPD). It is found that this effect differs from the charging-up typically observed in gas detector multiplier devices and increases the relative gain of the detector. The research indicates that this effect originates from the accumulation of charges on the insulating layer of the chip's pixel surface. Iterative simulations using COMSOL and GARFIELD++ are employed to model the variation of detector relative gain with the charging-up effect, and a simple yet effective model is proposed, which aligns well with experimental data. The feasibility of validating the deposition of resistive materials and adjusting the local voltage distribution on the chip to suppress charging-up effects and enhance the relative gain is also verified.
△ Less
Submitted 5 August, 2024; v1 submitted 22 February, 2024;
originally announced February 2024.
-
Modeling intercalation chemistry with multi-redox reactions by sparse lattice models in disordered rocksalt cathodes
Authors:
Peichen Zhong,
Fengyu Xie,
Luis Barroso-Luque,
Liliang Huang,
Gerbrand Ceder
Abstract:
Modern battery materials can contain many elements with substantial site disorder, and their configurational state has been shown to be critical for their performance. The intercalation voltage profile is a critical parameter to evaluate the performance of energy storage. The application of commonly used cluster expansion techniques to model the intercalation thermodynamics of such systems from \t…
▽ More
Modern battery materials can contain many elements with substantial site disorder, and their configurational state has been shown to be critical for their performance. The intercalation voltage profile is a critical parameter to evaluate the performance of energy storage. The application of commonly used cluster expansion techniques to model the intercalation thermodynamics of such systems from \textit{ab-initio} is challenged by the combinatorial increase in configurational degrees of freedom as the number of species grows. Such challenges necessitate efficient generation of lattice models without over-fitting and proper sampling of the configurational space under charge balance in ionic systems. In this work, we introduce a combined approach that addresses these challenges by (1) constructing a robust cluster-expansion Hamiltonian using the sparse regression technique, including $\ell_0\ell_2$-norm regularization and structural hierarchy; and (2) implementing semigrand-canonical Monte Carlo to sample charge-balanced ionic configurations using the table-exchange method and an ensemble-average approach. These techniques are applied to a disordered rocksalt oxyfluoride Li$_{1.3-x}$Mn$_{0.4}$Nb$_{0.3}$O$_{1.6}$F$_{0.4}$ (LMNOF) which is part of a family of promising earth-abundant cathode materials. The simulated voltage profile is found to be in good agreement with experimental data and particularly provides a clear demonstration of the Mn and oxygen contribution to the redox potential as a function of Li content.
△ Less
Submitted 7 July, 2023;
originally announced July 2023.
-
Magnetic-field-induced splitting of Rydberg Electromagnetically Induced Transparency (EIT) and Autler-Townes (AT) spectra in $^{87}$Rb vapor cell
Authors:
Xinheng Li,
Yue Cui,
Jianhai Hao,
Fei Zhou,
Fengdong Jia,
Jian Zhang,
Feng Xie,
Zhiping Zhong
Abstract:
We theoretically and experimentally investigate the Rydberg electromagnetically induced transparency (EIT) and Autler-Townes (AT) splitting of $^{87}$Rb vapor under the combined influence of a magnetic field and a microwave field. In the presence of static magnetic field, the effect of the microwave field leads to the dressing and splitting of each $m_F$ state, resulting in multiple spectral peaks…
▽ More
We theoretically and experimentally investigate the Rydberg electromagnetically induced transparency (EIT) and Autler-Townes (AT) splitting of $^{87}$Rb vapor under the combined influence of a magnetic field and a microwave field. In the presence of static magnetic field, the effect of the microwave field leads to the dressing and splitting of each $m_F$ state, resulting in multiple spectral peaks in the EIT-AT spectrum. A simplified analytical formula was developed to explain the EIT-AT spectrum in a static magnetic field, and the calculations are in excellent agreement with experimental results.We further studied the enhancement of the Rydberg atom microwave electric field sensor performance by making use of the splitting interval between the two maximum absolute $m_F$ states under static magnetic field. The traceable measurement limit of weak electric field by EIT-AT splitting method was extended by an order of magnitude, which is promising for precise microwave electric field measurement.
△ Less
Submitted 22 June, 2023;
originally announced June 2023.
-
Microwave electrometry with Rydberg atoms in a vapor cell using microwave amplitude modulation
Authors:
Jianhai Hao,
Fengdong Jia,
Yue Cui,
Yuhan Wang,
Fei Zhou,
Xiubin Liu,
Jian Zhang,
Feng Xie,
Zhiping Zhong
Abstract:
We have theoretically and experimentally studied the dispersive signal of the Rydberg atomic electromagnetically induced transparency (EIT) - Autler-Townes (AT) splitting spectra obtained using amplitude modulation of the microwave (MW) field. In addition to the two zero-crossing points, the dispersion signal has two positive maxima with an interval defined as the shoulder interval of the dispersi…
▽ More
We have theoretically and experimentally studied the dispersive signal of the Rydberg atomic electromagnetically induced transparency (EIT) - Autler-Townes (AT) splitting spectra obtained using amplitude modulation of the microwave (MW) field. In addition to the two zero-crossing points, the dispersion signal has two positive maxima with an interval defined as the shoulder interval of the dispersion signal $Δf_{\text{sho}}$. The relationship of MW field strength $E_{\text{MW}}$ and $Δf_{\text{sho}}$ are studied at the MW frequencies of 31.6 GHz, 22.1 GHz, and 9.2 GHz respectively. The results show that $Δf_{\text{sho}}$ can be used to character the much weaker $E_{\text{MW}}$ than the interval of two zero-crossing points $Δf_{\text{zeros}}$ and the traditional EIT-AT splitting interval $Δf_{\text{m}}$, the minimum $E_{\text{MW}}$ measured by $Δf_{\text{sho}}$ is about 30 times smaller than that by $Δf_{\text{m}}$. As an example, the minimum $E_{\text{MW}}$ at 9.2 GHz that can be characterized by $Δf_{\text{sho}}$ is 0.056 mV/cm, which is the minimum value characterized by frequency interval using vapour cell without adding any auxiliary fields. The proposed method can improve the weak limit and sensitivity of $E_{\text{MW}}$ measured by spectral frequency interval, which is important in the direct measurement of weak $E_{\text{MW}}$.
△ Less
Submitted 18 April, 2023;
originally announced April 2023.
-
High dynamic range open-loop current measurement based on diamond quantum magnetometer achieving ppm scale precision
Authors:
Qihui Liu,
Hao Chen,
Fei Xie,
Yuqiang Hu,
Jin Zhang,
Nan Wang,
Lihao Wang,
Yichen Liu,
Yang Wang,
Zhichao Chen,
Lingyun Li,
Jiangong Cheng,
Zhenyu Wu
Abstract:
Negatively charged nitrogen-vacancy (NV) centers in diamond have been extensively studied as a promising high sensitivity solid-state magnetic field sensor at room temperature. However, their use for current sensing applications is limited due to the challenge of integration and miniaturization of the diamond NV sensor. Here, we demonstrate an integrated NV sensor fabricated with standard microfab…
▽ More
Negatively charged nitrogen-vacancy (NV) centers in diamond have been extensively studied as a promising high sensitivity solid-state magnetic field sensor at room temperature. However, their use for current sensing applications is limited due to the challenge of integration and miniaturization of the diamond NV sensor. Here, we demonstrate an integrated NV sensor fabricated with standard microfabrication process. The sensor device incorporated with a toroidal magnetic yoke enables a high-precision wide range direct current sensing with galvanic isolation. The performance of the diamond NV current sensor in an open loop configuration has been investigated. A current measuring range of 0 A ~ 1000 A with an uncertainty of 46 ppm are achieved. Taking advantage of dual spin resonance modulation, temperature drift is suppressed to 10 ppm/K. This configuration opens new possibilities as a robust and scalable platform for current quantum sensing technologies.
△ Less
Submitted 17 April, 2023;
originally announced April 2023.
-
Equalizing the Pixel Response of the Imaging Photoelectric Polarimeter On-Board the IXPE Mission
Authors:
John Rankin,
Fabio Muleri,
Alessandro Di Marco,
Sergio Fabiani,
Fabio La Monaca,
Paolo Soffitta,
Matteo Bachetti,
Luca Baldini,
Enrico Costa,
Niccolò Di Lalla,
Alberto Manfreda,
Stephen L. O'Dell,
Matteo Perri,
Simonetta Puccetti,
Brian D. Ramsey,
Carmelo Sgrò,
Allyn F. Tennant,
Antonino Tobia,
Alessio Trois,
Martin C. Weisskopf,
Fei Xie
Abstract:
The Gas Pixel Detector is a gas detector, sensitive to the polarization of X-rays, currently flying on-board IXPE - the first observatory dedicated to X-ray polarimetry. It detects X-rays and their polarization by imaging the ionization tracks generated by photoelectrons absorbed in the sensitive volume, and then reconstructing the initial direction of the photoelectrons. The primary ionization ch…
▽ More
The Gas Pixel Detector is a gas detector, sensitive to the polarization of X-rays, currently flying on-board IXPE - the first observatory dedicated to X-ray polarimetry. It detects X-rays and their polarization by imaging the ionization tracks generated by photoelectrons absorbed in the sensitive volume, and then reconstructing the initial direction of the photoelectrons. The primary ionization charge is multiplied and ultimately collected on a finely-pixellated ASIC specifically developed for X-ray polarimetry. The signal of individual pixels is processed independently and gain variations can be substantial, of the order of 20%. Such variations need to be equalized to correctly reconstruct the track shape, and therefore its polarization direction. The method to do such equalization is presented here and is based on the comparison between the mean charge of a pixel with respect to the other pixels for equivalent events. The method is shown to finely equalize the response of the detectors on board IXPE, allowing a better track reconstruction and energy resolution, and can in principle be applied to any imaging detector based on tracks.
△ Less
Submitted 15 March, 2023;
originally announced March 2023.
-
Predicting structure-dependent Hubbard U parameters for assessing hybrid functional-level exchange via machine learning
Authors:
Zhendong Cao,
Guanghui Cai,
Fankai Xie,
Huaxian Jia,
Wei Liu,
Yaxian Wang,
Feng Liu,
Xinguo Ren,
Sheng Meng,
Miao Liu
Abstract:
DFT+U is a widely used treatment in the density functional theory (DFT) to deal with correlated materials that contain open-shell elements, whereby the quantitative and sometimes even qualitative failures of local and semilocal approximations can be corrected without much computational overhead. However, finding appropriate U parameters for a given system is non-trivial and usually requires comput…
▽ More
DFT+U is a widely used treatment in the density functional theory (DFT) to deal with correlated materials that contain open-shell elements, whereby the quantitative and sometimes even qualitative failures of local and semilocal approximations can be corrected without much computational overhead. However, finding appropriate U parameters for a given system is non-trivial and usually requires computationally intensive and cumbersome first-principles calculations. In this Letter, we address this issue by building a machine learning (ML) model to predict material-specific U parameters only from the structural information. An ML model is trained for the Mn-O chemical system by calibrating their DFT+U electronic structures with the hybrid functional results of more than Mn-O 3000 structures. The model allows us to determine a reliable U value (MAE=0.128 eV, R2=0.97) for any given structure at nearly no computational cost; yet the obtained U value is as good as that obtained from the conventional first-principles methods. Further analysis reveals that the U value is primarily determined by the local chemical structure, especially the bond lengths, and this property is well captured by the ML model developed in this work. This concept of the ML U model is universally applicable and can considerably ease the usage of the DFT+U method by providing structure-specific, readily accessible U values.
△ Less
Submitted 19 February, 2023;
originally announced February 2023.
-
Grand-canonical Monte-Carlo simulation methods for charge-decorated cluster expansions
Authors:
Fengyu Xie,
Peichen Zhong,
Luis Barroso-Luque,
Bin Ouyang,
Gerbrand Ceder
Abstract:
Monte-Carlo sampling of lattice model Hamiltonians is a well-established technique in statistical mechanics for studying the configurational entropy of crystalline materials. When species to be distributed on the lattice model carry charge, the charge balance constraint on the overall system prohibits single-site Metropolis exchanges in MC. In this article, we propose two methods to perform MC sam…
▽ More
Monte-Carlo sampling of lattice model Hamiltonians is a well-established technique in statistical mechanics for studying the configurational entropy of crystalline materials. When species to be distributed on the lattice model carry charge, the charge balance constraint on the overall system prohibits single-site Metropolis exchanges in MC. In this article, we propose two methods to perform MC sampling in the grand-canonical ensemble in the presence of a charge-balance constraint. The table-exchange method (TE) constructs small charge-conserving excitations, and the square-charge bias method (SCB) allows the system to temporarily drift away from charge neutrality. We illustrate the effect of internal hyper-parameters on the efficiency of these algorithms and suggest practical strategies on how to apply these algorithms to real applications.
△ Less
Submitted 3 October, 2022;
originally announced October 2022.
-
EpiGNN: Exploring Spatial Transmission with Graph Neural Network for Regional Epidemic Forecasting
Authors:
Feng Xie,
Zhong Zhang,
Liang Li,
Bin Zhou,
Yusong Tan
Abstract:
Epidemic forecasting is the key to effective control of epidemic transmission and helps the world mitigate the crisis that threatens public health. To better understand the transmission and evolution of epidemics, we propose EpiGNN, a graph neural network-based model for epidemic forecasting. Specifically, we design a transmission risk encoding module to characterize local and global spatial effec…
▽ More
Epidemic forecasting is the key to effective control of epidemic transmission and helps the world mitigate the crisis that threatens public health. To better understand the transmission and evolution of epidemics, we propose EpiGNN, a graph neural network-based model for epidemic forecasting. Specifically, we design a transmission risk encoding module to characterize local and global spatial effects of regions in epidemic processes and incorporate them into the model. Meanwhile, we develop a Region-Aware Graph Learner (RAGL) that takes transmission risk, geographical dependencies, and temporal information into account to better explore spatial-temporal dependencies and makes regions aware of related regions' epidemic situations. The RAGL can also combine with external resources, such as human mobility, to further improve prediction performance. Comprehensive experiments on five real-world epidemic-related datasets (including influenza and COVID-19) demonstrate the effectiveness of our proposed method and show that EpiGNN outperforms state-of-the-art baselines by 9.48% in RMSE.
△ Less
Submitted 23 August, 2022;
originally announced August 2022.
-
An $\ell_0\ell_2$-norm regularized regression model for construction of robust cluster expansions in multicomponent systems
Authors:
Peichen Zhong,
Tina Chen,
Luis Barroso-Luque,
Fengyu Xie,
Gerbrand Ceder
Abstract:
We introduce the $\ell_0\ell_2$-norm regularization and hierarchy constraints into linear regression for the construction of cluster expansion to describe configurational disorder in materials. The approach is implemented through mixed integer quadratic programming (MIQP). The $\ell_2$-norm regularization is used to suppress intrinsic data noise, while $\ell_0$-norm is used to penalize the number…
▽ More
We introduce the $\ell_0\ell_2$-norm regularization and hierarchy constraints into linear regression for the construction of cluster expansion to describe configurational disorder in materials. The approach is implemented through mixed integer quadratic programming (MIQP). The $\ell_2$-norm regularization is used to suppress intrinsic data noise, while $\ell_0$-norm is used to penalize the number of non-zero elements in the solution. The hierarchy relation between clusters imposes relevant physics and is naturally included by the MIQP paradigm. As such, sparseness and cluster hierarchy can be well optimized to obtain a robust, converged, and effective cluster interactions with improved physical meaning. We demonstrate the effectiveness of $\ell_0\ell_2$-norm regularization in two high-component disordered rocksalt cathode material systems, where we compare the cross-validation and convergence speed, reproduction of phase diagrams, voltage profiles, and Li-occupancy energies with those of the conventional $\ell_1$-norm regularized cluster expansion model.
△ Less
Submitted 27 June, 2022; v1 submitted 28 April, 2022;
originally announced April 2022.
-
Separation of track- and shower-like energy deposits in ProtoDUNE-SP using a convolutional neural network
Authors:
DUNE Collaboration,
A. Abed Abud,
B. Abi,
R. Acciarri,
M. A. Acero,
M. R. Adames,
G. Adamov,
M. Adamowski,
D. Adams,
M. Adinolfi,
A. Aduszkiewicz,
J. Aguilar,
Z. Ahmad,
J. Ahmed,
B. Aimard,
B. Ali-Mohammadzadeh,
T. Alion,
K. Allison,
S. Alonso Monsalve,
M. AlRashed,
C. Alt,
A. Alton,
R. Alvarez,
P. Amedo,
J. Anderson
, et al. (1204 additional authors not shown)
Abstract:
Liquid argon time projection chamber detector technology provides high spatial and calorimetric resolutions on the charged particles traversing liquid argon. As a result, the technology has been used in a number of recent neutrino experiments, and is the technology of choice for the Deep Underground Neutrino Experiment (DUNE). In order to perform high precision measurements of neutrinos in the det…
▽ More
Liquid argon time projection chamber detector technology provides high spatial and calorimetric resolutions on the charged particles traversing liquid argon. As a result, the technology has been used in a number of recent neutrino experiments, and is the technology of choice for the Deep Underground Neutrino Experiment (DUNE). In order to perform high precision measurements of neutrinos in the detector, final state particles need to be effectively identified, and their energy accurately reconstructed. This article proposes an algorithm based on a convolutional neural network to perform the classification of energy deposits and reconstructed particles as track-like or arising from electromagnetic cascades. Results from testing the algorithm on data from ProtoDUNE-SP, a prototype of the DUNE far detector, are presented. The network identifies track- and shower-like particles, as well as Michel electrons, with high efficiency. The performance of the algorithm is consistent between data and simulation.
△ Less
Submitted 30 June, 2022; v1 submitted 31 March, 2022;
originally announced March 2022.
-
Scintillation light detection in the 6-m drift-length ProtoDUNE Dual Phase liquid argon TPC
Authors:
DUNE Collaboration,
A. Abed Abud,
B. Abi,
R. Acciarri,
M. A. Acero,
M. R. Adames,
G. Adamov,
M. Adamowski,
D. Adams,
M. Adinolfi,
A. Aduszkiewicz,
J. Aguilar,
Z. Ahmad,
J. Ahmed,
B. Aimard,
B. Ali-Mohammadzadeh,
T. Alion,
K. Allison,
S. Alonso Monsalve,
M. AlRashed,
C. Alt,
A. Alton,
R. Alvarez,
P. Amedo,
J. Anderson
, et al. (1202 additional authors not shown)
Abstract:
DUNE is a dual-site experiment for long-baseline neutrino oscillation studies, neutrino astrophysics and nucleon decay searches. ProtoDUNE Dual Phase (DP) is a 6x6x6m3 liquid argon time-projection-chamber (LArTPC) that recorded cosmic-muon data at the CERN Neutrino Platform in 2019-2020 as a prototype of the DUNE Far Detector. Charged particles propagating through the LArTPC produce ionization and…
▽ More
DUNE is a dual-site experiment for long-baseline neutrino oscillation studies, neutrino astrophysics and nucleon decay searches. ProtoDUNE Dual Phase (DP) is a 6x6x6m3 liquid argon time-projection-chamber (LArTPC) that recorded cosmic-muon data at the CERN Neutrino Platform in 2019-2020 as a prototype of the DUNE Far Detector. Charged particles propagating through the LArTPC produce ionization and scintillation light. The scintillation light signal in these detectors can provide the trigger for non-beam events. In addition, it adds precise timing capabilities and improves the calorimetry measurements. In ProtoDUNE-DP, scintillation and electroluminescence light produced by cosmic muons in the LArTPC is collected by photomultiplier tubes placed up to 7 m away from the ionizing track. In this paper, the ProtoDUNE-DP photon detection system performance is evaluated with a particular focus on the different wavelength shifters, such as PEN and TPB, and the use of Xe-doped LAr, considering its future use in giant LArTPCs. The scintillation light production and propagation processes are analyzed and a comparison of simulation to data is performed, improving understanding of the liquid argon properties
△ Less
Submitted 3 June, 2022; v1 submitted 30 March, 2022;
originally announced March 2022.
-
Simulation of a Xe-based X-ray Polarimeter at 10-30 keV
Authors:
Jin Zhang,
Xinchen Cai,
Yongbo Huang,
Qian Liu,
Fei Xie,
Jin Li,
Hong-Bang Liu
Abstract:
Polarization detection of X-rays is a non-negligible topic to astrophysical observation. Many polarization detection methods have been well developed for X-rays in the energy range below 10~keV, while the detection at 10-30~keV is rarely discussed. This paper presents a simulation study of a Xe-based gas pixel detector, which can achieve the polarization detection of X-rays at 10-30~keV. To verify…
▽ More
Polarization detection of X-rays is a non-negligible topic to astrophysical observation. Many polarization detection methods have been well developed for X-rays in the energy range below 10~keV, while the detection at 10-30~keV is rarely discussed. This paper presents a simulation study of a Xe-based gas pixel detector, which can achieve the polarization detection of X-rays at 10-30~keV. To verify the emission angle distribution of photoelectrons, different electromagnetic models in Geant4 were investigated. After a necessary modification by considering the missing factor when sampling the emission angle, a good agreement can be achieved. Moreover, the detection capability of 20~keV polarized photons was discussed and the modulation factor could be 43\%.
△ Less
Submitted 28 January, 2022; v1 submitted 27 January, 2022;
originally announced January 2022.
-
The IXPE Instrument Calibration Equipment
Authors:
Fabio Muleri,
Raffaele Piazzolla,
Alessandro Di Marco,
Sergio Fabiani,
Fabio La Monaca,
Carlo Lefevre,
Alfredo Morbidini,
John Rankin,
Paolo Soffitta,
Antonino Tobia,
Fei Xie,
Fabrizio Amici,
Primo Attinà,
Matteo Bachetti,
Daniele Brienza,
Mauro Centrone,
Enrico Costa,
Ettore Del Monte,
Sergio Di Cosimo,
Giuseppe Di Persio,
Yuri Evangelista,
Riccardo Ferrazzoli,
Pasqualino Loffredo,
Matteo Perri,
Maura Pilia
, et al. (6 additional authors not shown)
Abstract:
The Imaging X-ray Polarimetry Explorer is a mission dedicated to the measurement of X-ray polarization from tens of astrophysical sources belonging to different classes. Expected to be launched at the end of 2021, the payload comprises three mirrors and three focal plane imaging polarimeters, the latter being designed and built in Italy. While calibration is always an essential phase in the develo…
▽ More
The Imaging X-ray Polarimetry Explorer is a mission dedicated to the measurement of X-ray polarization from tens of astrophysical sources belonging to different classes. Expected to be launched at the end of 2021, the payload comprises three mirrors and three focal plane imaging polarimeters, the latter being designed and built in Italy. While calibration is always an essential phase in the development of high-energy space missions, for IXPE it has been particularly extensive both to calibrate the response to polarization, which is peculiar to IXPE, and to achieve a statistical uncertainty below the expected sensitivity. In this paper we present the calibration equipment that was designed and built at INAF-IAPS in Rome, Italy, for the calibration of the polarization-sensitive focal plane detectors on-board IXPE. Equipment includes calibration sources, both polarized and unpolarized, stages to align and move the beam, test detectors and their mechanical assembly. While all these equipments were designed to fit the specific needs of the IXPE Instrument calibration, their versatility could also be used in the future for other projects.
△ Less
Submitted 3 November, 2021;
originally announced November 2021.
-
Infrared full-Stokes polarimetry by parametric up-conversion
Authors:
Zhanghang Zhu,
Di Zhang,
Fei Xie,
Jiaxin Chen,
Shengchao Gong,
Wei Wu,
Wei Cai,
Xinzheng Zhang,
Mengxin Ren,
Jingjun Xu
Abstract:
Polarimetry aims to measure polarization information of an optical field, providing a new freedom to enhance performance of optical metrology. Furthermore, the polarimetry in infrared (IR) range holds a promise for a wide range of academic and industrial applications because the IR light relates to unique spectral signatures of various complex chemicals. However, a primary challenge in IR applicat…
▽ More
Polarimetry aims to measure polarization information of an optical field, providing a new freedom to enhance performance of optical metrology. Furthermore, the polarimetry in infrared (IR) range holds a promise for a wide range of academic and industrial applications because the IR light relates to unique spectral signatures of various complex chemicals. However, a primary challenge in IR applications remains lacking efficient detectors. Motivated by such a constraint, we present in this paper a nonlinear up-conversion full-Stokes IR Retrieval Polarimetry (IRP) that is able to decipher the IR polarization using a well-commercial and high-performance visible light detector. Assisted by a nonlinear sum-frequency generation (SFG) process in a lithium niobate thin film, the polarization states of the IR light are encoded into the visible SF wave. Based on a Stokes-Mueller formalism developed here, the IR polarization is successfully retrieved from SF light with high precision, and polarization imaging over the targets with either uniform or non-uniform polarization distributions are demonstrated. Our results form a fresh perspective for the design of novel advanced up-conversion polarimeter for a wide range of IR metrological applications.
△ Less
Submitted 20 October, 2021;
originally announced October 2021.
-
Low exposure long-baseline neutrino oscillation sensitivity of the DUNE experiment
Authors:
DUNE Collaboration,
A. Abed Abud,
B. Abi,
R. Acciarri,
M. A. Acero,
M. R. Adames,
G. Adamov,
D. Adams,
M. Adinolfi,
A. Aduszkiewicz,
J. Aguilar,
Z. Ahmad,
J. Ahmed,
B. Aimard,
B. Ali-Mohammadzadeh,
T. Alion,
K. Allison,
S. Alonso Monsalve,
M. AlRashed,
C. Alt,
A. Alton,
P. Amedo,
J. Anderson,
C. Andreopoulos,
M. Andreotti
, et al. (1132 additional authors not shown)
Abstract:
The Deep Underground Neutrino Experiment (DUNE) will produce world-leading neutrino oscillation measurements over the lifetime of the experiment. In this work, we explore DUNE's sensitivity to observe charge-parity violation (CPV) in the neutrino sector, and to resolve the mass ordering, for exposures of up to 100 kiloton-megawatt-years (kt-MW-yr). The analysis includes detailed uncertainties on t…
▽ More
The Deep Underground Neutrino Experiment (DUNE) will produce world-leading neutrino oscillation measurements over the lifetime of the experiment. In this work, we explore DUNE's sensitivity to observe charge-parity violation (CPV) in the neutrino sector, and to resolve the mass ordering, for exposures of up to 100 kiloton-megawatt-years (kt-MW-yr). The analysis includes detailed uncertainties on the flux prediction, the neutrino interaction model, and detector effects. We demonstrate that DUNE will be able to unambiguously resolve the neutrino mass ordering at a 3$σ$ (5$σ$) level, with a 66 (100) kt-MW-yr far detector exposure, and has the ability to make strong statements at significantly shorter exposures depending on the true value of other oscillation parameters. We also show that DUNE has the potential to make a robust measurement of CPV at a 3$σ$ level with a 100 kt-MW-yr exposure for the maximally CP-violating values $δ_{\rm CP}} = \pmπ/2$. Additionally, the dependence of DUNE's sensitivity on the exposure taken in neutrino-enhanced and antineutrino-enhanced running is discussed. An equal fraction of exposure taken in each beam mode is found to be close to optimal when considered over the entire space of interest.
△ Less
Submitted 3 September, 2021;
originally announced September 2021.
-
Design, construction and operation of the ProtoDUNE-SP Liquid Argon TPC
Authors:
DUNE Collaboration,
A. Abed Abud,
B. Abi,
R. Acciarri,
M. A. Acero,
M. R. Adames,
G. Adamov,
D. Adams,
M. Adinolfi,
A. Aduszkiewicz,
J. Aguilar,
Z. Ahmad,
J. Ahmed,
B. Ali-Mohammadzadeh,
T. Alion,
K. Allison,
S. Alonso Monsalve,
M. Alrashed,
C. Alt,
A. Alton,
P. Amedo,
J. Anderson,
C. Andreopoulos,
M. Andreotti,
M. P. Andrews
, et al. (1158 additional authors not shown)
Abstract:
The ProtoDUNE-SP detector is a single-phase liquid argon time projection chamber (LArTPC) that was constructed and operated in the CERN North Area at the end of the H4 beamline. This detector is a prototype for the first far detector module of the Deep Underground Neutrino Experiment (DUNE), which will be constructed at the Sandford Underground Research Facility (SURF) in Lead, South Dakota, USA.…
▽ More
The ProtoDUNE-SP detector is a single-phase liquid argon time projection chamber (LArTPC) that was constructed and operated in the CERN North Area at the end of the H4 beamline. This detector is a prototype for the first far detector module of the Deep Underground Neutrino Experiment (DUNE), which will be constructed at the Sandford Underground Research Facility (SURF) in Lead, South Dakota, USA. The ProtoDUNE-SP detector incorporates full-size components as designed for DUNE and has an active volume of $7\times 6\times 7.2$~m$^3$. The H4 beam delivers incident particles with well-measured momenta and high-purity particle identification. ProtoDUNE-SP's successful operation between 2018 and 2020 demonstrates the effectiveness of the single-phase far detector design. This paper describes the design, construction, assembly and operation of the detector components.
△ Less
Submitted 23 September, 2021; v1 submitted 4 August, 2021;
originally announced August 2021.
-
A universal model for the formation energy prediction of inorganic compounds
Authors:
Yingzong Liang,
Mingwei Chen,
Yanan Wang,
Huaxian Jia,
Tenglong Lu,
Fankai Xie,
Sheng Meng,
Miao Liu
Abstract:
Harnessing the recent advance in data science and materials science, it is feasible today to build predictive models for materials properties. In this study, we employ the data of high-throughput quantum mechanics calculations based on 170,714 inorganic crystalline compounds to train a machine learning model for formation energy prediction. Different from the previous work, our model reaches a fai…
▽ More
Harnessing the recent advance in data science and materials science, it is feasible today to build predictive models for materials properties. In this study, we employ the data of high-throughput quantum mechanics calculations based on 170,714 inorganic crystalline compounds to train a machine learning model for formation energy prediction. Different from the previous work, our model reaches a fairly good predictive ability (R2=0.982 and MAE=0.07 eVatom-1, DenseNet model) and meanwhile can be universally applied to the large phase space of inorganic materials. The improvement comes from several effective structure-dependent descriptors that are proposed to take the information of electronegativity and structure into account. This model can provide a useful tool to search for new materials in a vast phase space in a fast and cost-effective manner.
△ Less
Submitted 31 July, 2021;
originally announced August 2021.
-
Design, Construction, and Test of the Gas Pixel Detectors for the IXPE Mission
Authors:
L. Baldini,
M. Barbanera,
R. Bellazzini,
R. Bonino,
F. Borotto,
A. Brez,
C. Caporale,
C. Cardelli,
S. Castellano,
M. Ceccanti,
S. Citraro,
N. Di Lalla,
L. Latronico,
L. Lucchesi,
C. Magazzù,
G. Magazzù,
S. Maldera,
A. Manfreda,
M. Marengo,
A. Marrocchesi,
P. Mereu,
M. Minuti,
F. Mosti,
H. Nasimi,
A. Nuti
, et al. (69 additional authors not shown)
Abstract:
Due to be launched in late 2021, the Imaging X-Ray Polarimetry Explorer (IXPE) is a NASA Small Explorer mission designed to perform polarization measurements in the 2-8 keV band, complemented with imaging, spectroscopy and timing capabilities. At the heart of the focal plane is a set of three polarization-sensitive Gas Pixel Detectors (GPD), each based on a custom ASIC acting as a charge-collectin…
▽ More
Due to be launched in late 2021, the Imaging X-Ray Polarimetry Explorer (IXPE) is a NASA Small Explorer mission designed to perform polarization measurements in the 2-8 keV band, complemented with imaging, spectroscopy and timing capabilities. At the heart of the focal plane is a set of three polarization-sensitive Gas Pixel Detectors (GPD), each based on a custom ASIC acting as a charge-collecting anode. In this paper we shall review the design, manufacturing, and test of the IXPE focal-plane detectors, with particular emphasis on the connection between the science drivers, the performance metrics and the operational aspects. We shall present a thorough characterization of the GPDs in terms of effective noise, trigger efficiency, dead time, uniformity of response, and spectral and polarimetric performance. In addition, we shall discuss in detail a number of instrumental effects that are relevant for high-level science analysis -- particularly as far as the response to unpolarized radiation and the stability in time are concerned.
△ Less
Submitted 12 July, 2021;
originally announced July 2021.
-
Measurement of the distribution of $^{207}$Bi depositions on calibration sources for SuperNEMO
Authors:
R. Arnold,
C. Augier,
A. S. Barabash,
A. Basharina-Freshville,
E. Birdsall,
S. Blondel,
M. Bongrand,
D. Boursette,
R. Breier,
V. Brudanin,
J. Busto,
S. Calvez,
C. Cerna,
J. P. Cesar,
M. Ceschia,
A. Chapon,
E. Chauveau,
A. Chopra,
L. Dawson,
S. De Capua,
D. Duchesneau,
D. Durand,
G. Eurin,
J. J. Evans,
D. Filosofov
, et al. (75 additional authors not shown)
Abstract:
The SuperNEMO experiment will search for neutrinoless double-beta decay ($0νββ$), and study the Standard-Model double-beta decay process ($2νββ$). The SuperNEMO technology can measure the energy of each of the electrons produced in a double-beta ($ββ$) decay, and can reconstruct the topology of their individual tracks. The study of the double-beta decay spectrum requires very accurate energy calib…
▽ More
The SuperNEMO experiment will search for neutrinoless double-beta decay ($0νββ$), and study the Standard-Model double-beta decay process ($2νββ$). The SuperNEMO technology can measure the energy of each of the electrons produced in a double-beta ($ββ$) decay, and can reconstruct the topology of their individual tracks. The study of the double-beta decay spectrum requires very accurate energy calibration to be carried out periodically. The SuperNEMO Demonstrator Module will be calibrated using 42 calibration sources, each consisting of a droplet of $^{207}$Bi within a frame assembly.
The quality of these sources, which depends upon the entire $^{207}$Bi droplet being contained within the frame, is key for correctly calibrating SuperNEMO's energy response. In this paper, we present a novel method for precisely measuring the exact geometry of the deposition of $^{207}$Bi droplets within the frames, using Timepix pixel detectors. We studied 49 different sources and selected 42 high-quality sources with the most central source positioning.
△ Less
Submitted 20 May, 2021; v1 submitted 26 March, 2021;
originally announced March 2021.
-
Great Chiral Fluorescence from Optical Duality Silver Nanostructures Enabled by 3D Laser Printing
Authors:
Hongjing Wen,
Shichao Song,
Fei Xie,
Bin Wang,
Jian Xu,
Ziwei Feng,
Shiyu Wu,
Jing Han,
Baiou Guan,
Xiaoxuan Xu,
Yaoyu Cao,
Xiangping Li
Abstract:
Featured by prominent flexibility and fidelity in producing sophisticated stereoscopic structures transdimensionally, three-dimensional (3D) laser printing technique has vastly extended the toolkit for delivering diverse functional devices. Yet chiral nanoemitters heavily resorting to artificial structures that manifest efficient emission and tightly confined light-mater interactions simultaneousl…
▽ More
Featured by prominent flexibility and fidelity in producing sophisticated stereoscopic structures transdimensionally, three-dimensional (3D) laser printing technique has vastly extended the toolkit for delivering diverse functional devices. Yet chiral nanoemitters heavily resorting to artificial structures that manifest efficient emission and tightly confined light-mater interactions simultaneously remains alluring but dauntingly challenging for this technique at this moment. In this work, we assert the chiral photoluminescence is implemented from silver nanostructures of optical duality in one go via a twofold three-dimensional laser printing scheme. Such laser printing protocol allows the highly desired duality by simultaneously producing uniformly distributed fluorescent silver nanoclusters and aggregated plasmonic silver nanoparticles to tightly confine chiral interactions at the nanoscale. A helical emitter of 550 nm-helix-diameter as fabricated has seen a record-high luminescence anisotropic factor with the absolute value up to 0.58, which is two orders of magnitude greater than fluorescent chiral silver clusters. This method holds great promise for future versatile applications in chiroptical nanodevices.
△ Less
Submitted 19 June, 2020;
originally announced June 2020.
-
A Gd@C82-based single molecular electret device with switchable electrical polarization
Authors:
Kangkang Zhang,
Cong Wang,
Minhao Zhang,
Zhanbin Bai,
Fangfang Xie,
Yuanzhi Tan,
Yilv Guo,
Kuo-Juei Hu,
Lu Cao,
Shuai Zhang,
Xuecou Tu,
Lin Kang,
Jian Chen,
Peiheng Wu,
Xuefeng Wang,
Jinlan Wang,
Junming Liu,
Baigeng Wang,
Guanghou Wang,
Suyuan Xie,
Wei Ji,
Su-Fei Shi,
M. A. Reed,
Fengqi Song
Abstract:
Single molecular electrets exhibiting single molecule electric polarization switching have been long desired as a platform for extremely small non-volatile storage devices, although it is controversial because of the poor stability of single molecular electric dipoles. Here we study the single molecular device of GdC82, where the encapsulated Gd atom forms a charge center, and we have observed a g…
▽ More
Single molecular electrets exhibiting single molecule electric polarization switching have been long desired as a platform for extremely small non-volatile storage devices, although it is controversial because of the poor stability of single molecular electric dipoles. Here we study the single molecular device of GdC82, where the encapsulated Gd atom forms a charge center, and we have observed a gate controlled switching behavior between two sets of single electron transport stability diagrams. The switching is operated in a hysteresis loop with a coercive gate field of around 0.5Vnm. Theoretical calculations have assigned the two conductance diagrams to corresponding energy levels of two states that the Gd atom is trapped at two different sites of the C82 cage, which possess two different permanent electrical dipole orientations. The two dipole states are stabilized by the anisotropic energy and separated by a transition energy barrier of 70 meV. Such switching is then accessed to the electric field driven reorientation of individual dipole while overcoming the barriers by the coercive gate field, and demonstrates the creation of a single molecular electret.
△ Less
Submitted 24 March, 2020;
originally announced March 2020.
-
Resonantly tunable second harmonic generation from lithium niobate metasurfaces
Authors:
Junjun Ma,
Fei Xie,
Weijin Chen,
Jiaxin Chen,
Wei Wu,
Wei Liu,
Yuntian Chen,
Wei Cai,
Mengxin Ren,
Jingjun Xu
Abstract:
Second harmonic generation (SHG) is a coherent nonlinear phenomenon that plays an important role in laser color conversion. Lithium niobate (LN), which features both a large band gap and outstanding second-order nonlinearities, acts as an important optical material for nonlinear frequency conversion covering a wide spectral range from ultraviolet to mid-infrared. Here we experimentally demonstrate…
▽ More
Second harmonic generation (SHG) is a coherent nonlinear phenomenon that plays an important role in laser color conversion. Lithium niobate (LN), which features both a large band gap and outstanding second-order nonlinearities, acts as an important optical material for nonlinear frequency conversion covering a wide spectral range from ultraviolet to mid-infrared. Here we experimentally demonstrate LN metasurfaces with controllable SHG properties. Distinct enhancements for the SHG efficiency are observed at Mie-resonances. And by changing the geometric parameters thus the resonances of the metasurfaces, we manage to selectively boost the SHG efficiency at different wavelengths. Our results would pave a way for developing with high flexibility the novel compact nonlinear light sources for applications, such as biosensing and optical communications.
△ Less
Submitted 26 October, 2020; v1 submitted 16 February, 2020;
originally announced February 2020.
-
Search for the double-beta decay of 82Se to the excited states of 82Kr with NEMO-3
Authors:
The NEMO-3 collaboration R. Arnold,
C. Augier,
A. S. Barabash,
A. Basharina-Freshville,
S. Blondel,
S. Blot,
M. Bongrand,
D. Boursette,
R. Breier,
V. Brudanin,
J. Busto,
A. J. Caffrey,
S. Calvez,
M. Cascella,
C. Cerna,
J. P. Cesar,
A. Chapon,
E. Chauveau,
A. Chopra,
L. Dawson,
D. Duchesneau,
D. Durand,
V. Egorov,
G. Eurin,
J. J. Evans
, et al. (82 additional authors not shown)
Abstract:
The double-beta decay of 82Se to the 0+1 excited state of 82Kr has been studied with the NEMO-3 detector using 0.93 kg of enriched 82Se measured for 4.75 y, corresponding to an exposure of 4.42 kg y. A dedicated analysis to reconstruct the gamma-rays has been performed to search for events in the 2e2g channel. No evidence of a 2nbb decay to the 0+1 state has been observed and a limit of T2n 1/2(82…
▽ More
The double-beta decay of 82Se to the 0+1 excited state of 82Kr has been studied with the NEMO-3 detector using 0.93 kg of enriched 82Se measured for 4.75 y, corresponding to an exposure of 4.42 kg y. A dedicated analysis to reconstruct the gamma-rays has been performed to search for events in the 2e2g channel. No evidence of a 2nbb decay to the 0+1 state has been observed and a limit of T2n 1/2(82Se; 0+gs -> 0+1) > 1.3 1021 y at 90% CL has been set. Concerning the 0nbb decay to the 0+1 state, a limit for this decay has been obtained with T0n 1/2(82Se; 0+g s -> 0+1) > 2.3 1022 y at 90% CL, independently from the 2nbb decay process. These results are obtained for the first time with a tracko-calo detector, reconstructing every particle in the final state.
△ Less
Submitted 17 January, 2020;
originally announced January 2020.
-
Research on the pixel-based and object-oriented methods of urban feature extraction with GF-2 remote-sensing images
Authors:
Dong-dong Zhang,
Lei Zhang,
Vladimir Zaborovsky,
Feng Xie,
Yan-wen Wu,
Ting-ting Lu
Abstract:
During the rapid urbanization construction of China, acquisition of urban geographic information and timely data updating are important and fundamental tasks for the refined management of cities. With the development of domestic remote sensing technology, the application of Gaofen-2 (GF-2) high-resolution remote sensing images can greatly improve the accuracy of information extraction. This paper…
▽ More
During the rapid urbanization construction of China, acquisition of urban geographic information and timely data updating are important and fundamental tasks for the refined management of cities. With the development of domestic remote sensing technology, the application of Gaofen-2 (GF-2) high-resolution remote sensing images can greatly improve the accuracy of information extraction. This paper introduces an approach using object-oriented classification methods for urban feature extraction based on GF-2 satellite data. A combination of spectral, spatial attributes and membership functions was employed for mapping the urban features of Qinhuai District, Nanjing. The data preprocessing is carried out by ENVI software, and the subsequent data is exported into the eCognition software for object-oriented classification and extraction of urban feature information. Finally, the obtained raster image classification results are vectorized using the ARCGIS software, and the vector graphics are stored in the library, which can be used for further analysis and modeling. Accuracy assessment was performed using ground truth data acquired by visual interpretation and from other reliable secondary data sources. Compared with the result of pixel-based supervised (neural net) classification, the developed object-oriented method can significantly improve extraction accuracy, and after manual interpretation, an overall accuracy of 95.44% can be achieved, with a Kappa coefficient of 0.9405, which objectively confirmed the superiority of the object-oriented method and the feasibility of the utilization of GF-2 satellite data.
△ Less
Submitted 8 March, 2019;
originally announced March 2019.
-
Watt-level widely tunable single-mode emission by injection-locking of a multimode Fabry-Perot quantum cascade laser
Authors:
Paul Chevalier,
Marco Piccardo,
Sajant Anand,
Enrique A. Mejia,
Yongrui Wang,
Tobias S. Mansuripur,
Feng Xie,
Kevin Lascola,
Alexey Belyanin,
Federico Capasso
Abstract:
Free-running Fabry-Perot lasers normally operate in a single-mode regime until the pumping current is increased beyond the single-mode instability threshold, above which they evolve into a multimode state. As a result of this instability, the single-mode operation of these lasers is typically constrained to few percents of their output power range, this being an undesired limitation in spectroscop…
▽ More
Free-running Fabry-Perot lasers normally operate in a single-mode regime until the pumping current is increased beyond the single-mode instability threshold, above which they evolve into a multimode state. As a result of this instability, the single-mode operation of these lasers is typically constrained to few percents of their output power range, this being an undesired limitation in spectroscopy applications. In order to expand the span of single-mode operation, we use an optical injection seed generated by an external-cavity single-mode laser source to force the Fabry-Perot quantum cascade laser into a single-mode state in the high current range, where it would otherwise operate in a multimode regime. Utilizing this approach we achieve single-mode emission at room temperature with a tuning range of $36 \, \mathrm{cm}^-1$ and stable continuous-wave output power exceeding 1 W. Far-field measurements show that a single transverse mode is emitted up to the highest optical power indicating that the beam properties of the seeded Fabry-Perot laser remain unchanged as compared to free-running operation.
△ Less
Submitted 19 February, 2018; v1 submitted 8 December, 2017;
originally announced December 2017.
-
Single-mode instability in standing-wave lasers: The quantum cascade laser as a self-pumped parametric oscillator
Authors:
Tobias S. Mansuripur,
Camille Vernet,
Paul Chevalier,
Guillaume Aoust,
Benedikt Schwarz,
Feng Xie,
Catherine Caneau,
Kevin Lascola,
Chung-en Zah,
David P. Caffey,
Timothy Day,
Leo J. Missaggia,
Michael K. Connors,
Christine A. Wang,
Alexey Belyanin,
Federico Capasso
Abstract:
We report the observation of a clear single-mode instability threshold in continuous-wave Fabry-Perot quantum cascade lasers (QCLs). The instability is characterized by the appearance of sidebands separated by tens of free spectral ranges (FSR) from the first lasing mode, at a pump current not much higher than the lasing threshold. As the current is increased, higher-order sidebands appear that pr…
▽ More
We report the observation of a clear single-mode instability threshold in continuous-wave Fabry-Perot quantum cascade lasers (QCLs). The instability is characterized by the appearance of sidebands separated by tens of free spectral ranges (FSR) from the first lasing mode, at a pump current not much higher than the lasing threshold. As the current is increased, higher-order sidebands appear that preserve the initial spacing, and the spectra are suggestive of harmonically phase-locked waveforms. We present a theory of the instability that applies to all homogeneously broadened standing-wave lasers. The low instability threshold and the large sideband spacing can be explained by the combination of an unclamped, incoherent Lorentzian gain due to the population grating, and a coherent parametric gain caused by temporal population pulsations that changes the spectral gain line shape. The parametric term suppresses the gain of sidebands whose separation is much smaller than the reciprocal gain recovery time, while enhancing the gain of more distant sidebands. The large gain recovery frequency of the QCL compared to the FSR is essential to observe this parametric effect, which is responsible for the multiple-FSR sideband separation. We predict that by tuning the strength of the incoherent gain contribution, for example by engineering the modal overlap factors and the carrier diffusion, both amplitude-modulated (AM) or frequency-modulated emission can be achieved from QCLs. We provide initial evidence of an AM waveform emitted by a QCL with highly asymmetric facet reflectivities, thereby opening a promising route to ultrashort pulse generation in the mid-infrared. Together, the experiments and theory clarify a deep connection between parametric oscillation in optically pumped microresonators and the single-mode instability of lasers, tying together literature from the last 60 years.
△ Less
Submitted 31 October, 2017;
originally announced November 2017.
-
Self-starting harmonic frequency comb generation in a quantum cascade laser
Authors:
Dmitry Kazakov,
Marco Piccardo,
Yongrui Wang,
Paul Chevalier,
Tobias S. Mansuripur,
Feng Xie,
Chung-en Zah,
Kevin Lascola,
Alexey Belyanin,
Federico Capasso
Abstract:
Optical frequency combs establish a rigid phase-coherent link between microwave and optical domains and are emerging as high-precision tools in an increasing number of applications. Frequency combs with large intermodal spacing are employed in the field of microwave photonics for radiofrequency arbitrary waveform synthesis and for generation of THz tones of high spectral purity in the future wirel…
▽ More
Optical frequency combs establish a rigid phase-coherent link between microwave and optical domains and are emerging as high-precision tools in an increasing number of applications. Frequency combs with large intermodal spacing are employed in the field of microwave photonics for radiofrequency arbitrary waveform synthesis and for generation of THz tones of high spectral purity in the future wireless communication networks. We demonstrate for the first time self-starting harmonic frequency comb generation with a THz repetition rate in a quantum cascade laser. The large intermodal spacing caused by the suppression of tens of adjacent cavity modes originates from a parametric contribution to the gain due to temporal modulations of the population inversion in the laser. The mode spacing of the harmonic comb is shown to be uniform to within $5\times 10^{-12}$ parts of the central frequency using multiheterodyne self-detection. This new harmonic comb state extends the range of applications of quantum cascade laser frequency combs.
△ Less
Submitted 8 September, 2017;
originally announced September 2017.
-
The $0$ to $R_1$ cylinder radial coordinate transformation can not be used to make cylinder layer electromagnetic cloak
Authors:
Jianhua Li,
Feng Xie,
Lee Xie,
Ganquan Xie
Abstract:
In this paper, we discover and proved that the $0$ to $R_1$ cylinder radial coordinate transformation can not be used to make cylinder layer electromagnetic EM cloak. Because in the $0$ to $R_1$ cylinder radial coordinate transformation, the value area of the electric wave field $E_z (ρ,φ,z)$ and magnetic wave field $H_z (ρ,φ,z)$ are invariant. After $0$ to $R_1$ cylinder radial transformation,…
▽ More
In this paper, we discover and proved that the $0$ to $R_1$ cylinder radial coordinate transformation can not be used to make cylinder layer electromagnetic EM cloak. Because in the $0$ to $R_1$ cylinder radial coordinate transformation, the value area of the electric wave field $E_z (ρ,φ,z)$ and magnetic wave field $H_z (ρ,φ,z)$ are invariant. After $0$ to $R_1$ cylinder radial transformation,$ρ_q = R_1 + Q(ρ)$, $E_z (ρ_q,φ,z) = E_z (ρ,φ,z)$,$H_z (ρ_q,φ,z) = H_z (ρ,φ,z)$ . in the physical inner cylinder boundary, $E_z (R_1,φ,z) \ne 0$,$H_z (R_1,φ,z) \ne 0$, The cylinder EM wave field will propagation penetrate into the inner cylinder $ρ< R_1,\left| z \right| < \infty $ .Therefore, the inner cylinder $ρ< R_1,\left| z \right| < \infty $ . can not be cloaked. In many published papers on EM cylinder cloak, the $0$ to $R_1$ cylinder radial transformation is wrongfully used for their EM cylinder layer cloak.
△ Less
Submitted 8 July, 2017;
originally announced July 2017.
-
Practicable GLHUA Invisible Cloaks Absorb the Incident Wave and create Outgoing Wave Without Exceeding Light Speed Propagation and New N Dimensional Maxwell Equations
Authors:
Jianhua Li,
Feng Xie,
Lee Xie,
Ganquan Xie
Abstract:
In this paper, we propose practicable GLHUA invisible cloaks, our cloak absorb the incident wave and create outgoing wave that make them to be invisible cloaks and analytical electromagnetic (EM) wave without exceeding light speed propagation. Discoveries and creations are reported. 1. New GLHUA-i,i=1,2,3 annular layer EM invisible cloak with relative refractive index large or equal to 1. 2. Analy…
▽ More
In this paper, we propose practicable GLHUA invisible cloaks, our cloak absorb the incident wave and create outgoing wave that make them to be invisible cloaks and analytical electromagnetic (EM) wave without exceeding light speed propagation. Discoveries and creations are reported. 1. New GLHUA-i,i=1,2,3 annular layer EM invisible cloak with relative refractive index large or equal to 1. 2. Analytical EM wave solution of EM wave equation with the GLHUA 1-3 cloak materials are found, In GLHUA-1 cloak, $\varepsilon_r = μ_r = \frac{R_2 ^2 }{r^2 }$, $\varepsilon_θ= \varepsilon_φ= μ_θ= μ_φ= \frac{R_2 - R_1 }{r - R_1 }$, In GLHUA-2 cloak, $\varepsilon _r = μ_r = \frac{1}{r^2 }\frac{(R_1 (r - R_1 ) + (R_2 - R_1 )^2 )^2 }{(R_2 - R_1 )^2 }$,. 3. A GLHUA expansion method and an exact analytical EM wave propagation in the GLHUA-i,i=1,2,3 cloak without exceeding light speed propagation that are propsed. 4.Novel negative space is proposed. 5. GLHUANP-i, i=2,3 transformation are proposed, which maps $ - \infty $ to $R_1$ and $-R_2$ to $R_2$. 6. The GLHUANP-i, i=2,3 transformation creates GLHUA-2 and GLHUA-3 cloaks. 7. GLHUA-i, i=1,2,3 cloaks absorb the incident wave and create outgoing wave that make them invisible cloak and analytical EM wave through them. 8. GLHUAF transformation and .GLHUAF invisible cloak with double negative materials is created. 9. The relative parameters of the GLHUA-1 are large than 1, radial parameter in GLHUA-2 cloak is large than positive number, refractive index of the GLHUA 1-3 cloak are large than 1. 10. Two wave fronts in GLHUA cloaks one front is absorbing incoming incident, other front is created wave by cloak materials. 11. New ND Maxwell Eq. is created. The patent, copyright and all rights are reserved by authors in GLGEO in USA.
△ Less
Submitted 13 April, 2020; v1 submitted 22 June, 2017;
originally announced June 2017.
-
Problem On The Acoustic Cloak By $0$ to $R_1$ Transformation
Authors:
Jianhua Li,
Feng Xie,
Lee Xie,
Ganquan Xie
Abstract:
The $0$ to $R_1$ radial spherical coordinate transformation method can be making electromagnetic (EM) invisible cloak. However the cloak by transformation optic has infinite speed and exceeding light speed etc fundamental difficulties. In this paper, we discover problem on acoustic cloak by transformation and prove that in the $0$ to $R_1$ radial spherical coordinate transformation, the pressure w…
▽ More
The $0$ to $R_1$ radial spherical coordinate transformation method can be making electromagnetic (EM) invisible cloak. However the cloak by transformation optic has infinite speed and exceeding light speed etc fundamental difficulties. In this paper, we discover problem on acoustic cloak by transformation and prove that in the $0$ to $R_1$ radial spherical coordinate transformation, the pressure wave field $P(r_p)=P(r)$ is invariant, in the physical inner spherical surface boundary $r=R_1$, $P(R_1)$ is not zero. the acoustic field propagation penetrate into the inner sphere $r < R_1$.Therefore, the inner sphere $r < R_1$ can not be cloaked. The GL simulation figures of the pressure acoustic wave propagation penetrate into the inner sphere $r \le R_1$ are presented in figure 1 to figure 12.The pressure wave is setting to zero that cause the scattering wave to disturb incident pressure acoustic wave outside of the outer sphere $r \ge R_2$ that make the whole sphere $r \ge R_2$ will be deltected. GL method simulation is presented in figure 13. we discovered and proved that $0$ to $R_1$ sphere radial transformation can not be used to induce acoustic no scattering cloak.
△ Less
Submitted 16 November, 2017; v1 submitted 17 June, 2017;
originally announced June 2017.
-
Status of the SuperNEMO 0$νββ$ experiment
Authors:
C. Patrick,
F. Xie
Abstract:
SuperNEMO is an ultra-low-background tracker-calorimeter experiment designed to look for the neutrinoless double-beta decay of various isotopes. We present the current state of the experiment's Demonstrator Module, which is currently being installed and and commissioned in the LSM in France.
SuperNEMO is an ultra-low-background tracker-calorimeter experiment designed to look for the neutrinoless double-beta decay of various isotopes. We present the current state of the experiment's Demonstrator Module, which is currently being installed and and commissioned in the LSM in France.
△ Less
Submitted 28 April, 2017; v1 submitted 21 April, 2017;
originally announced April 2017.
-
Orientational Phase Transitions and the Assembly of Viral Capsids
Authors:
Sanjay Dharmavaram,
Fangming Xie,
William Klug,
Joseph Rudnick,
Robijn Bruinsma
Abstract:
We present a generalized Landau-Brazovskii free energy for the solidification of chiral molecules on a spherical surface in the context of the assembly of viral shells. We encounter two types of icosahedral solidification transitions. The first type is a conventional first-order phase transition from the uniform to the icosahedral state. It can be described by a single icosahedral spherical harmon…
▽ More
We present a generalized Landau-Brazovskii free energy for the solidification of chiral molecules on a spherical surface in the context of the assembly of viral shells. We encounter two types of icosahedral solidification transitions. The first type is a conventional first-order phase transition from the uniform to the icosahedral state. It can be described by a single icosahedral spherical harmonic of even $l$. The chiral pseudo-scalar term in the free energy creates secondary terms with chiral character but it does not affect the thermodynamics of the transition. The second type, associated with icosahedral spherical harmonics with odd $l$, is anomalous. Pure odd $l$ icosahedral states are unstable but stability is recovered if admixture with the neighboring $l+1$ icosahedral spherical harmonic is included, generated by the non-linear terms. This is in conflict with the principle of Landau theory that symmetry-breaking transitions are characterized by only a \textit{single} irreducible representation of the symmetry group of the uniform phase and we argue that this principle should be removed from Landau theory. The chiral term now directly affects the transition because it lifts the degeneracy between two isomeric mixed-$l$ icosahedral states. A direct transition is possible only over a limited range of parameters. Outside this range, non-icosahedral states intervene. For the important case of capsid assembly dominated by $l=15$, the intervening states are found to be based on octahedral symmetry.
△ Less
Submitted 16 January, 2017;
originally announced January 2017.
-
Electromagnetic Wave Propagation in GLHUA Invisible Sphere by GL No Scattering Full Wave Modeling and Inversion
Authors:
Jianhua Li,
Feng Xie,
Lee Xie,
Ganquan Xie
Abstract:
Using GL no scattering full wave modeling and inversion, we create a GLHUA pre cloak electromagnetic (EM) material in the virtual sphere that makes the sphere is invisible. The invisible sphere is called GLHUA sphere. In GLHUA sphere, the Pre cloak relative parameter is not less than 1; the parameters and their derivative are continuous across the boundary r=R2 and the parameters are going to infi…
▽ More
Using GL no scattering full wave modeling and inversion, we create a GLHUA pre cloak electromagnetic (EM) material in the virtual sphere that makes the sphere is invisible. The invisible sphere is called GLHUA sphere. In GLHUA sphere, the Pre cloak relative parameter is not less than 1; the parameters and their derivative are continuous across the boundary r=R2 and the parameters are going to infinity at origin r=0. The phase velocity of EM wave in the sphere is less than light speed and going to zero at origin. The EM wave field excited in the outside of the sphere can not be disturbed by GLHUA sphere. By GL full wave method, we rigorously proved the incident EM wave field excited in outside of GLHUA sphere and propagation through the sphere without any scattering by the sphere, the total EM field in outside of the sphere equal to the incident wave field. Moreover, we prove that in GLHUA sphere with the pre cloak material, when r is going to origin, EM wave field propagation in GLHUA sphere is going to zero. We propose a $N$ dimensional MAXWELL equations. All copyright and patent of the GLHUA EM cloaks,GLHUA sphere and GL modeling and inversion methods are reserved by authors in GL Geophysical Laboratory.
△ Less
Submitted 14 April, 2020; v1 submitted 26 December, 2016;
originally announced January 2017.
-
The Theoretical Proof for GLHUA EM Invisible Double Layer Cloak By Using GL No Scattering Modeling and Inversion
Authors:
Jianhua Li,
Feng Xie,
Lee Xie,
Ganquan Xie
Abstract:
In this paper, we proposed the GLHUA double layer cloak; proved the properties of GLHUA double layer cloak; Using GL no scattering inversion and the pre cloak condition 6.1 to 6.4 in paper [1], we create GLHUA outer layer cloak radial relative parameter and angular relative parameter theoretically. We proved theorem 4.1 to theorem 4.4 that the phase velocity of the electromagnetic wave in GLHUA ou…
▽ More
In this paper, we proposed the GLHUA double layer cloak; proved the properties of GLHUA double layer cloak; Using GL no scattering inversion and the pre cloak condition 6.1 to 6.4 in paper [1], we create GLHUA outer layer cloak radial relative parameter and angular relative parameter theoretically. We proved theorem 4.1 to theorem 4.4 that the phase velocity of the electromagnetic wave in GLHUA outer layer cloak is less than light speed and tends to zero at the boundary $r=R_1$, the EM wave tends to zero at $r=R1$; When source $r_s > R_2$ in the outside of the cloak and observer $r_o < R_o$ in the concealment, then $\vec E(\vec r_o)=0$ and $\vec H(\vec r_o)=0$ that is proved in theorem 5.1 and 5.3. We prove that the EM wave excited in outside of the cloak can not propagation penetrate into the concealment. In theorem 5.4 to 5.6, we rigorously proved the EM wave excited in outside of the cloak can not be disturbed by the cloak. In theorem 6.1 to theorem 6.6, we prove that the EM wave excited in the concealment can not propagate to outside of GLHUA inner cloak. we prove that the EM wave excited in the concealment can not be disturbed by the cloak. We theoretically prove that the GLHUA double cloak is invisible cloak with concealment and with relative parameter not less than 1; the GLHUA double layer cloak is practicable. In December of 2016, we submitted 3 papers to arXiv for GLHUA double layer cloak with relative parameters not less than 1. This is the third paper. The task and content of the three paper are different from each other. The second paper [1] and this Paper are theoretical base and proof of the subjects in paper arXiv:1612.02857. We find an exact analytical EM wave field of Maxwell EM equation in GLHUA cloak and mirage bridge wave. Patent of the GLHUA EM cloaks,GLHUA sphere and GL modeling and inversion methods are reserved by authors in GL Geophysical Laboratory.
△ Less
Submitted 6 September, 2018; v1 submitted 30 December, 2016;
originally announced January 2017.
-
Novel GLHUA Electromagnetic Invisible Double Layer Cloak With Relative Parameters Not Less Than 1 and GL No Scattering Inversion,radial R in the sphere coordinate can be negative in a negative space world
Authors:
Jianhua Li,
Feng Xie,
Lee Xie,
Ganquan Xie
Abstract:
Using GILD and GL no scattering modeling and inversion, we find a class of the nonzero solution of the zero scattering nonlinear inversion equation and use it to create our GLHUA cloak with relative EM parameter not less than 1 for each layer with any thickness. major new ingredients are: (1) In the outer layer, R1 < r < R2, the relative radial electric permittivity and radial magnetic permeabilit…
▽ More
Using GILD and GL no scattering modeling and inversion, we find a class of the nonzero solution of the zero scattering nonlinear inversion equation and use it to create our GLHUA cloak with relative EM parameter not less than 1 for each layer with any thickness. major new ingredients are: (1) In the outer layer, R1 < r < R2, the relative radial electric permittivity and radial magnetic permeability equal to 1; the relative angular electric permittivity and magnetic permeability are equal to 0.5((H/C)^(Alpha)+(C/H)^(Alpha)),C=R2-R1, H= r-R1; (2) In the inner layer cloak R0 < r < R1 , the relative radial electric permittivity and radial magnetic permeability equal to 1; the relative angular electric permittivity and magnetic permeability are equal to 0.5((H/C)(R0/r))^(Alpha)+((C/H)(r/R0))^(Alpha)),C=R1-R0, H= R1-r; (3) The phase velocity of wave in GLHUA cloak is less than light speed and tends to zero at r=R1;(4) We proved that GLHUA cloak is complete invisible cloak with concealment; in GLHUA cloak, the EM wave field is going to zero at r=R1. The incident wave excited in outside of GLHUA cloak can not be disturbed by cloak, and the wave can not propagation penetrate into the concealment; (5) The incident wave excited in concealment can not propagation to go to outside of the cloak, the incident wave can not be disturbed in the concealment.(6) The idea and no scattering modeling and inversion and practicable GLHUA cloak are new invisible natural science attract more researcher's effort. In my [33].we discover negative space, in which sphere radial R is negative. We found an exact full EM wave propagation solution of the EM equation in the GLHUA double layer invisible cloak, which is breakthrough progress. Analytical EM wave propagation in GLHUA cloak is published in this version. We create a novel sphere radial transformation from negative infinite to R_1 sphere radial transformation.
△ Less
Submitted 7 September, 2018; v1 submitted 2 December, 2016;
originally announced December 2016.
-
Landau Theory and the Emergence of Chirality in Viral Capsids
Authors:
Sanjay Dharmavaram,
Fangming Xie,
William Klug,
Joseph Rudnick,
Robijn Bruinsma
Abstract:
We present a generalized Landau-Brazovskii theory for the solidification of chiral molecules on a spherical surface. With increasing sphere radius one encounters first intervals where robust achiral density modulations appear with icosahedral symmetry via first-order transitions. Next, one en- counters intervals where fragile but stable icosahedral structures still can be constructed but only by s…
▽ More
We present a generalized Landau-Brazovskii theory for the solidification of chiral molecules on a spherical surface. With increasing sphere radius one encounters first intervals where robust achiral density modulations appear with icosahedral symmetry via first-order transitions. Next, one en- counters intervals where fragile but stable icosahedral structures still can be constructed but only by superposition of multiple irreducible representations. Chiral icoshedral structures appear via continuous or very weakly first-order transitions. Outside these parameter intervals, icosahedral symmetry is broken along a three-fold axis or a five-fold axis. The predictions of the theory are compared with recent numerical simulations.
△ Less
Submitted 8 June, 2016;
originally announced June 2016.
-
Oscillation of the spin-currents of cold atoms on a ring due to light-induced spin-orbit coupling
Authors:
W. F. Xie,
Y. Z. He,
C. G. Bao
Abstract:
The evolution of two-component cold atoms on a ring with spin-orbit coupling has been studied analytically for the case with N noninteracting particles. Then, the effect of interaction is evaluated numerically via a two-body system. Two cases are considered: (i) Starting from a ground state the evolution is induced by a sudden change of the laser field, and (ii) Starting from a superposition state…
▽ More
The evolution of two-component cold atoms on a ring with spin-orbit coupling has been studied analytically for the case with N noninteracting particles. Then, the effect of interaction is evaluated numerically via a two-body system. Two cases are considered: (i) Starting from a ground state the evolution is induced by a sudden change of the laser field, and (ii) Starting from a superposition state. Oscillating persistent spin-currents have been found. A set of formulae have been derived to describe the period and amplitude of the oscillation. Based on these formulae the oscillation can be well controlled via adjusting the parameters of the laser beams. In particular, it is predicted that movable stripes might emerge on the ring.
△ Less
Submitted 10 May, 2015;
originally announced May 2015.
-
A Real-Time Detecting Algorithm for Tracking Community Structure of Dynamic Networks
Authors:
Jiaxing Shang,
Lianchen Liu,
Feng Xie,
Zhen Chen,
Jiajia Miao,
Xuelin Fang,
Cheng Wu
Abstract:
In this paper a simple but efficient real-time detecting algorithm is proposed for tracking community structure of dynamic networks. Community structure is intuitively characterized as divisions of network nodes into subgroups, within which nodes are densely connected while between which they are sparsely connected. To evaluate the quality of community structure of a network, a metric called modul…
▽ More
In this paper a simple but efficient real-time detecting algorithm is proposed for tracking community structure of dynamic networks. Community structure is intuitively characterized as divisions of network nodes into subgroups, within which nodes are densely connected while between which they are sparsely connected. To evaluate the quality of community structure of a network, a metric called modularity is proposed and many algorithms are developed on optimizing it. However, most of the modularity based algorithms deal with static networks and cannot be performed frequently, due to their high computing complexity. In order to track the community structure of dynamic networks in a fine-grained way, we propose a modularity based algorithm that is incremental and has very low computing complexity. In our algorithm we adopt a two-step approach. Firstly we apply the algorithm of Blondel et al for detecting static communities to obtain an initial community structure. Then, apply our incremental updating strategies to track the dynamic communities. The performance of our algorithm is measured in terms of the modularity. We test the algorithm on tracking community structure of Enron Email and three other real world datasets. The experimental results show that our algorithm can keep track of community structure in time and outperform the well known CNM algorithm in terms of modularity.
△ Less
Submitted 10 July, 2014;
originally announced July 2014.
-
Global analysis of data on the spin-orbit coupled $A^{1}Σ_{u}^{+}$ and $b^{3}Π_{u}$ states of Cs2
Authors:
Jianmei Bai,
E. H. Ahmed,
B. Beser,
Y. Guan,
S. Kotochigova,
A. M. Lyyra,
S. Ashman,
C. M. Wolfe,
J. Huennekens,
Feng Xie,
Dan Li,
Li Li,
M. Tamanis,
R. Ferber,
A. Drozdova,
E. Pazyuk,
A. V. Stolyarov,
J. G. Danzl,
H. -C. Nägerl,
N. Bouloufa,
O. Dulieu,
C. Amiot,
H. Salami,
T. Bergeman
Abstract:
We present experimentally derived potential curves and spin-orbit interaction functions for the strongly perturbed $A^{1}Σ_{u}^{+}$ and $b^{3}Π_{u}$ states of the cesium dimer. The results are based on data from several sources. Laser-induced fluorescence Fourier transform spectroscopy (LIF FTS) was used some time ago in the Laboratoire Aimé Cotton primarily to study the $X ^{1}Σ_{g}^{+}$ state. M…
▽ More
We present experimentally derived potential curves and spin-orbit interaction functions for the strongly perturbed $A^{1}Σ_{u}^{+}$ and $b^{3}Π_{u}$ states of the cesium dimer. The results are based on data from several sources. Laser-induced fluorescence Fourier transform spectroscopy (LIF FTS) was used some time ago in the Laboratoire Aimé Cotton primarily to study the $X ^{1}Σ_{g}^{+}$ state. More recent work at Tsinghua University provides information from moderate resolution spectroscopy on the lowest levels of the $b^{3}Π_{0u}^{\pm}$ states as well as additional high resolution data. From Innsbruck University, we have precision data obtained with cold Cs$_{2}$ molecules. Recent data from Temple University was obtained using the optical-optical double resonance polarization spectroscopy technique, and finally, a group at the University of Latvia has added additional LIF FTS data. In the Hamiltonian matrix, we have used analytic potentials (the Expanded Morse Oscillator form) with both finite-difference (FD) coupled-channels and discrete variable representation (DVR) calculations of the term values. Fitted diagonal and off-diagonal spin-orbit functions are obtained and compared with {\it ab initio} results from Temple and Moscow State universities.
△ Less
Submitted 27 January, 2011;
originally announced January 2011.
-
GLLH EM Invisible Cloak With Novel Front Branching And Without Exceed Light Speed Violation
Authors:
Ganquan Xie,
Jianhua Li,
Lee Xie,
Feng Xie
Abstract:
In this paper, we propose new Global and Local (GL) electromagnetic (EM) cloaks with distinctive class material a_{αβ}\log ^α(b_{αβ}/h) h^β(GLLH Cloak) without exceed light speed violation. The refractive index of the GLLH cloak material, $n(r)$, is large than one or equal to one. Our GLLH cloak is created by GL EM modeling and GL EM cloak inversion with searching class \it a_{αβ}\log ^α(b_{αβ}/h)…
▽ More
In this paper, we propose new Global and Local (GL) electromagnetic (EM) cloaks with distinctive class material a_{αβ}\log ^α(b_{αβ}/h) h^β(GLLH Cloak) without exceed light speed violation. The refractive index of the GLLH cloak material, $n(r)$, is large than one or equal to one. Our GLLH cloak is created by GL EM modeling and GL EM cloak inversion with searching class \it a_{αβ}\log ^α(b_{αβ}/h) h^β. The GLLH cloaks in this paper have finite speed and have no exceed light speed? physical violations and have more advantages. The GLLH EM cloaks can be practicable by using normal materials and are available for all broad frequency band. The GL EM cloak inversion and electromagnetic integral equation for cloak are presented in this paper. The novel EM wave propagation and front branching in the GLLH cloak by GL EM modeling are presented in this paper. The EM wave front propagation in GLLH cloak is behind of the front in free space. At time steps $118 dt$, in the GLLH cloak, the wave front is curved as a crescent like and propagates slower than the light in free space. At the time step $119dt$, the EM wave inside of the GLLH cloak propagates slower than light speed, moreover, its two crescent front peaks intersect at a front branching point. At the front branching point, the front is split to two fronts. The novel front branching and crescent like wave propagation are displayed in the following figure 1, figure 2 and figures 5 -20 in this paper. All copyright and patent of the GLLH EM cloaks and GL modeling and inversion methods are reserved by authors in GL Geophysical Laboratory.
△ Less
Submitted 21 May, 2010;
originally announced May 2010.
-
A GL Double Layer EM Cloaks In Broad Frequency Band And Reciprocal Law
Authors:
Ganquan Xie,
Jianhua Li,
Lee Xie,
Feng Xie
Abstract:
In this paper, we propose a novel GLWF double layer EM cloak in the broad frequency band. The GLWF double layer cloak consists of two sphere annular layers, two type cloak materials are proposed and installed in its each layer, respectively. The outer layer of the GL cloak has the invisible function in broad frequency band, while its inner layer has the fully absorption and rapid delay function.…
▽ More
In this paper, we propose a novel GLWF double layer EM cloak in the broad frequency band. The GLWF double layer cloak consists of two sphere annular layers, two type cloak materials are proposed and installed in its each layer, respectively. The outer layer of the GL cloak has the invisible function in broad frequency band, while its inner layer has the fully absorption and rapid delay function. The GLWF double layer cloak overcomes the following difficulties of the single layer PS cloak. (1) There exists no EM wavefield can be excited inside the concealment of the PS cloak, the concealment of the PS cloak is blind. Our GL double layer cloak recovered that the EM wave field can be excited inside the concealment of the GL double layer cloak. (2) There is exceeding light speed physical violation in PS cloak, its invisibility only in very narrow frequency band. Our GLWF double layer cloak corrects the violation. (3) The reciprocal law is satisfied in our GL double cloak media. However, the PS cloak damaged the reciprocal law.. The simulations and comparisons of the EM wave field propagation through the GLWF double cloak, GL double cloak and GL double layer with PS outer layer are presented to show the advantages of the GLWF double layer EM cloak The GL double layer cloaks are proposed by our GL EM modeling and inversion.
The 3D GL EM modeling simulations for the double layer cloak are presented. The copyright and patent of the GLWF double layer cloak materials and GL EM modeling and inversion in this paper are reserved by authors in GL Geophysical Laboratory.
△ Less
Submitted 23 February, 2010;
originally announced February 2010.
-
A Double Layer Electromagnetic Cloak And GL EM Modeling
Authors:
Ganquan Xie,
Jianhua Li,
Feng Xie,
Lee Xie
Abstract:
In this paper, we propose a novel electromagnetic (EM) cloaking structure that consists of two annular layers between three spherical shells and model its performance numerically and theoretically by using a Global and Local EM field (GL) method. The two annular layers contain distinct cloaking materials: the outer layer provides invisibility; the inner layer is fully absorbing. The cloaking mat…
▽ More
In this paper, we propose a novel electromagnetic (EM) cloaking structure that consists of two annular layers between three spherical shells and model its performance numerically and theoretically by using a Global and Local EM field (GL) method. The two annular layers contain distinct cloaking materials: the outer layer provides invisibility; the inner layer is fully absorbing. The cloaking materials are weakly degenerative. The wavefield from an EM source located outside the cloak propagates as in free space outside the outer shell, never be disturbed by the cloak and does not penetrate into the inner absorbing layer and concealment.
The field of a source located inside inner layer or the cloaked concealment is completely absorbed by the inner layer and never reaches the outside of the middle shell, Moreover, the EM wavefield excited in concealment is not disrupted by the cloak. There exists no Maxwell EM wavefield can be excited in a single layer cloaked concealment which is filled by normal material. Moreover, we find a negative dielectric and positive susceptibility metamaterial to fill into the concealment, such that the interior EM wave propagates from the concealment to free space through the single layer cloak. Therefore, the double layer cloak is important and necessary for complete invisibility. Numerical simulations and theoretical analysis verifying these properties are performed using the GL EM modeling method that we described in this paper.
△ Less
Submitted 5 July, 2009;
originally announced July 2009.
-
An Electromagnetic GL Double Layered Cloak
Authors:
Ganquan Xie,
Jianhua Li,
Feng Xie,
Lee Xie
Abstract:
In this paper, we propose a new electromagnetic (EM) GL double layered cloak. The GL double layered cloak is consist of two sphere annular layers, $R_1 \le r \le R_2$ and $R_2 \le r \le R_3$. Two type cloak materials are proposed and installed in the each layer, respectively. The outer layer cloak of the GL double layered cloak has the invisible function, the inner layer cloak has fully absorpti…
▽ More
In this paper, we propose a new electromagnetic (EM) GL double layered cloak. The GL double layered cloak is consist of two sphere annular layers, $R_1 \le r \le R_2$ and $R_2 \le r \le R_3$. Two type cloak materials are proposed and installed in the each layer, respectively. The outer layer cloak of the GL double layered cloak has the invisible function, the inner layer cloak has fully absorption function. The GL double layered metamaterials are weak degenerative and weak dispersive. When the source is located outside of the GL double layered cloak, the excited EM wave field propagation outside of the double layered cloak is as same as in free space and never be disturbed by the cloak; also, the exterior EM wave can not penetrate into the inner layer and concealment. When local sources are located inside of the GL double cloaked concealment with the normal EM materials, the excited EM wave is propagating under Maxwell equation governing, it is complete absorbed by the inner layer cloak of GL double cloak and never propagate to outside of the inner layer of the GL cloak, moreover, the EM wavefield in concealment never be disturbed by the cloak. The GL doubled layered cloak is a robust cloak and has complete and sufficient invisibility functions. Its concealment is the normal electromagnetic environment. Our EM GL double layered cloak is different from conventional common cloak. The 3D GL EM modeling simulations for the double layered cloak are presented. The GL method is an effective physical simulation method and is fully different from the conventional methods. It has double abilities of the theoretical analysis and numerical simulations to study the cloak metamaterials and wide materials and field scattering problem in physical sciences.
△ Less
Submitted 21 April, 2009;
originally announced April 2009.
-
No Maxwell Electromagnetic Wave Field Excited In Cloaked Concealment
Authors:
Ganquan Xie,
Jianhua Li,
Feng Xie,
Lee Xie
Abstract:
The GL electromagnetic (EM) modeling is used to simulate the 3D EM full wave field propagation through cloaks. The 3D GL simulation of the EM wave field excited by a point source outside of the cloaks has been done. The simulation of the EM wave field from the point source excitation inside of the cloak device is presented in this paper. By using the GL modeling simulation, we found a phenomenon…
▽ More
The GL electromagnetic (EM) modeling is used to simulate the 3D EM full wave field propagation through cloaks. The 3D GL simulation of the EM wave field excited by a point source outside of the cloaks has been done. The simulation of the EM wave field from the point source excitation inside of the cloak device is presented in this paper. By using the GL modeling simulation, we found a phenomenon that there is no Maxwell EM wave field which is excited by nonzero local sources inside of the single layer cloaked concealment. The theoretical proof of the phenomenon by GL method is proposed in this paper. The GL method is fully different from the conventional methods. The GL method has double abilities of the theoretical analysis and numerical simulations to research the physical process and cloak metamaterial properties that is exhibited in this paper.
△ Less
Submitted 20 April, 2009;
originally announced April 2009.